[people/ms/u-boot.git] / include / configs / CPCI4052.h

/*
 * (C) Copyright 2001-2004
 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_CPCI405		1	/* ...on a CPCI405 board	*/
#define CONFIG_CPCI405_VER2	1	/* ...version 2			*/
#undef  CONFIG_CPCI405_6U               /* enable this for 6U boards    */

#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/

#define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/

#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

#undef	CONFIG_BOOTARGS
#undef	CONFIG_BOOTCOMMAND

#define CONFIG_PREBOOT                  /* enable preboot variable      */

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0	/* PHY address			*/
#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */

#define CONFIG_NET_MULTI	1
#undef  CONFIG_HAS_ETH1

#define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PCI
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_IDE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DATE
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_BSP
#define CONFIG_CMD_EEPROM

#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#define CONFIG_SUPPORT_VFAT

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory		*/
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/

#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
#ifdef	CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2	"> "
#endif

#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/

#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/

#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */

#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#undef	CFG_EXT_SERIAL_CLOCK	       /* no external serial clock used */
#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
#define CFG_BASE_BAUD	    691200

/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CFG_LOAD_ADDR	0x100000	/* default load address */
#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */

#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */

#define CONFIG_CMDLINE_EDITING		/* add command line history	*/

#define CONFIG_LOOPW            1       /* enable loopw command         */

#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */

#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */

/*-----------------------------------------------------------------------
 * PCI stuff
 *-----------------------------------------------------------------------
 */
#define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
#define PCI_HOST_FORCE  1               /* configure as pci host        */
#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */

#define CONFIG_PCI			/* include pci support	        */
#define CONFIG_PCI_HOST	PCI_HOST_AUTO   /* select pci host function     */
#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
					/* resource configuration       */

#define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */

#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/

#define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/

#define CFG_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
#define CFG_PCI_SUBSYS_DEVICEID 0x0405  /* PCI Device ID: CPCI-405      */
#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A    */
#define CFG_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
#define CFG_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
#define CFG_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
#define CFG_PCI_PTM2LA  0xffc00000      /* point to flash               */
#define CFG_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
#define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */

/*-----------------------------------------------------------------------
 * IDE/ATA stuff
 *-----------------------------------------------------------------------
 */
#undef	CONFIG_IDE_8xx_DIRECT		    /* no pcmcia interface required */
#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
#define CONFIG_IDE_RESET	1	/* reset for ide supported	*/

#define CFG_IDE_MAXBUS		1		/* max. 1 IDE busses	*/
#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */

#define CFG_ATA_BASE_ADDR	0xF0100000
#define CFG_ATA_IDE0_OFFSET	0x0000

#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
#define CFG_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
#define CFG_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0xFFFC0000
#define CFG_MONITOR_BASE	CFG_FLASH_BASE
#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
/*
 * The following defines are added for buggy IOP480 byte interface.
 * All other boards should use the standard values (CPCI405 etc.)
 */
#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/

#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

#if 0 /* Use NVRAM for environment variables */
/*-----------------------------------------------------------------------
 * NVRAM organization
 */
#define CONFIG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
#define CONFIG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
#define CONFIG_ENV_ADDR		\
	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CONFIG_ENV_SIZE+8))	/* Env	*/

#else /* Use EEPROM for environment variables */

#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
				   /* total size of a CAT24WC16 is 2048 bytes */
#endif

#define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
#define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
#define CFG_VXWORKS_MAC_PTR     (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/

/*-----------------------------------------------------------------------
 * I2C EEPROM (CAT24WC16) for environment
 */
#define CONFIG_HARD_I2C			/* I2c with hardware support */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE		0x7F

#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
					/* 16 byte page write mode using*/
					/* last 4 bits of the address	*/
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0xFFC00000	/* FLASH bank #1	*/

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 */

/* Memory Bank 0 (Flash Bank 0) initialization					*/
#define CFG_EBC_PB0AP		0x92015480
#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 1 (Flash Bank 1) initialization					*/
#define CFG_EBC_PB1AP		0x92015480
#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 2 (CAN0, 1) initialization					*/
#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
#define CFG_LED_ADDR		0xF0000380

/* Memory Bank 3 (CompactFlash IDE) initialization				*/
#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */

/* Memory Bank 4 (NVRAM/RTC) initialization					*/
/*#define CFG_EBC_PB4AP		  0x01805280  / * TWT=3,WBN=1,WBF=1,TH=1,SOR=1	   */
#define CFG_EBC_PB4AP		0x01805680  /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1	*/
#define CFG_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 5 (optional Quart) initialization				*/
#define CFG_EBC_PB5AP		0x04005B80  /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
#define CFG_EBC_PB5CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 6 (FPGA internal) initialization					*/
#define CFG_EBC_PB6AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
#define CFG_EBC_PB6CR		0xF041A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
#define CFG_FPGA_BASE_ADDR	0xF0400000

/*-----------------------------------------------------------------------
 * FPGA stuff
 */
/* FPGA internal regs */
#define CFG_FPGA_MODE		0x00
#define CFG_FPGA_STATUS		0x02
#define CFG_FPGA_TS		0x04
#define CFG_FPGA_TS_LOW		0x06
#define CFG_FPGA_TS_CAP0	0x10
#define CFG_FPGA_TS_CAP0_LOW	0x12
#define CFG_FPGA_TS_CAP1	0x14
#define CFG_FPGA_TS_CAP1_LOW	0x16
#define CFG_FPGA_TS_CAP2	0x18
#define CFG_FPGA_TS_CAP2_LOW	0x1a
#define CFG_FPGA_TS_CAP3	0x1c
#define CFG_FPGA_TS_CAP3_LOW	0x1e

/* FPGA Mode Reg */
#define CFG_FPGA_MODE_CF_RESET	    0x0001
#define CFG_FPGA_MODE_DUART_RESET   0x0002
#define CFG_FPGA_MODE_ENABLE_OUTPUT 0x0004     /* only set on CPCI-405 Ver 3 */
#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
#define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
#define CFG_FPGA_MODE_TS_CLEAR	    0x2000

/* FPGA Status Reg */
#define CFG_FPGA_STATUS_DIP0	0x0001
#define CFG_FPGA_STATUS_DIP1	0x0002
#define CFG_FPGA_STATUS_DIP2	0x0004
#define CFG_FPGA_STATUS_FLASH	0x0008
#define CFG_FPGA_STATUS_TS_IRQ	0x1000

#define CFG_FPGA_SPARTAN2	1	    /* using Xilinx Spartan 2 now    */
#define CFG_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for XC2S15  */

/* FPGA program pin configuration */
#define CFG_FPGA_PRG		0x04000000  /* FPGA program pin (ppc output) */
#define CFG_FPGA_CLK		0x02000000  /* FPGA clk pin (ppc output)     */
#define CFG_FPGA_DATA		0x01000000  /* FPGA data pin (ppc output)    */
#define CFG_FPGA_INIT		0x00010000  /* FPGA init pin (ppc input)     */
#define CFG_FPGA_DONE		0x00008000  /* FPGA done pin (ppc input)     */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in data cache)
 */
#define CFG_INIT_DCACHE_CS	7	/* use cs # 7 for data cache memory    */

#define CFG_INIT_RAM_ADDR	0x40000000  /* use data cache		       */
#define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
c609719b	1	/*
a20b27a3	2	* (C) Copyright 2001-2004
c609719b WD	3	* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_405GP 1 /* This is a PPC405 CPU */
c837dcb1	37	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
c609719b	38	#define CONFIG_CPCI405 1 /* ...on a CPCI405 board */
c837dcb1	39	#define CONFIG_CPCI405_VER2 1 /* ...version 2 */
6f35c531	40	#undef CONFIG_CPCI405_6U /* enable this for 6U boards */
c609719b	41
c837dcb1	42	#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
c609719b	43
a20b27a3	44	#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
c609719b WD	45
	46	#define CONFIG_BAUDRATE 9600
	47	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
	48
c609719b	49	#undef CONFIG_BOOTARGS
a20b27a3 SR	50	#undef CONFIG_BOOTCOMMAND
	51
	52	#define CONFIG_PREBOOT /* enable preboot variable */
c609719b WD	53
	54	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	55	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	56
	57	#define CONFIG_MII 1 /* MII PHY management */
c837dcb1	58	#define CONFIG_PHY_ADDR 0 /* PHY address */
a20b27a3	59	#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
6f35c531 MF	60	#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
	61
	62	#define CONFIG_NET_MULTI 1
	63	#undef CONFIG_HAS_ETH1
c609719b WD	64
	65	#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
	66
5d2ebe1b JL	67	/*
	68	* BOOTP options
	69	*/
	70	#define CONFIG_BOOTP_SUBNETMASK
	71	#define CONFIG_BOOTP_GATEWAY
	72	#define CONFIG_BOOTP_HOSTNAME
	73	#define CONFIG_BOOTP_BOOTPATH
	74	#define CONFIG_BOOTP_DNS
	75	#define CONFIG_BOOTP_DNS2
	76	#define CONFIG_BOOTP_SEND_HOSTNAME
	77
9919f13c	78
49cf7e8e JL	79	/*
	80	* Command line configuration.
	81	*/
	82	#include <config_cmd_default.h>
	83
	84	#define CONFIG_CMD_DHCP
	85	#define CONFIG_CMD_PCI
	86	#define CONFIG_CMD_IRQ
	87	#define CONFIG_CMD_IDE
	88	#define CONFIG_CMD_FAT
	89	#define CONFIG_CMD_ELF
	90	#define CONFIG_CMD_DATE
49cf7e8e JL	91	#define CONFIG_CMD_I2C
	92	#define CONFIG_CMD_MII
	93	#define CONFIG_CMD_PING
	94	#define CONFIG_CMD_BSP
	95	#define CONFIG_CMD_EEPROM
	96
c609719b WD	97	#define CONFIG_MAC_PARTITION
	98	#define CONFIG_DOS_PARTITION
	99
a20b27a3 SR	100	#define CONFIG_SUPPORT_VFAT
a20b27a3 SR	101
c837dcb1	102	#undef CONFIG_WATCHDOG /* watchdog disabled */
c609719b	103
c837dcb1	104	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
c609719b WD	105
	106	/*
	107	* Miscellaneous configurable options
	108	*/
	109	#define CFG_LONGHELP /* undef to save memory */
	110	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	111
	112	#undef CFG_HUSH_PARSER /* use "hush" command parser */
	113	#ifdef CFG_HUSH_PARSER
c837dcb1	114	#define CFG_PROMPT_HUSH_PS2 "> "
c609719b WD	115	#endif
c609719b WD	116
49cf7e8e	117	#if defined(CONFIG_CMD_KGDB)
c837dcb1	118	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
c609719b	119	#else
c837dcb1	120	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
c609719b WD	121	#endif
	122	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	123	#define CFG_MAXARGS 16 /* max number of command args */
	124	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	125
c837dcb1	126	#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
c609719b	127
c837dcb1	128	#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
c609719b	129
a20b27a3 SR	130	#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
a20b27a3 SR	131
c609719b WD	132	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	133	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
	134
c837dcb1 WD	135	#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
	136	#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
	137	#define CFG_BASE_BAUD 691200
c609719b WD	138
c609719b WD	139	/* The following table includes the supported baudrates */
c837dcb1	140	#define CFG_BAUDRATE_TABLE \
8bde7f77 WD	141	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
8bde7f77 WD	142	57600, 115200, 230400, 460800, 921600 }
c609719b WD	143
	144	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	145	#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
	146
c837dcb1	147	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
c609719b	148
ac53ee83 MF	149	#define CONFIG_CMDLINE_EDITING /* add command line history */
ac53ee83 MF	150
a20b27a3 SR	151	#define CONFIG_LOOPW 1 /* enable loopw command */
a20b27a3 SR	152
c609719b WD	153	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
c609719b WD	154
c837dcb1	155	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
9e7d5ebe	156
c837dcb1	157	#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
53cf9435	158
c609719b WD	159	/*-----------------------------------------------------------------------
	160	* PCI stuff
	161	*-----------------------------------------------------------------------
	162	*/
a20b27a3 SR	163	#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
	164	#define PCI_HOST_FORCE 1 /* configure as pci host */
	165	#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
	166
	167	#define CONFIG_PCI /* include pci support */
	168	#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
	169	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	170	/* resource configuration */
	171
	172	#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
	173
	174	#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
	175
	176	#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
	177
	178	#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
	179	#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
	180	#define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */
	181	#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
2076d0a1 SR	182	#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */
2076d0a1 SR	183	#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) \| 1) /* memsize, enable hard-wired to 1 */
a20b27a3 SR	184	#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
	185	#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
	186	#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
	187	#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
c609719b WD	188
	189	/*-----------------------------------------------------------------------
	190	* IDE/ATA stuff
	191	*-----------------------------------------------------------------------
	192	*/
c837dcb1 WD	193	#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
c837dcb1 WD	194	#undef CONFIG_IDE_LED /* no led for ide supported */
c609719b WD	195	#define CONFIG_IDE_RESET 1 /* reset for ide supported */
c609719b WD	196
c837dcb1 WD	197	#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
c837dcb1 WD	198	#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS1) / max. 1 drives per IDE bus */
c609719b	199
c837dcb1 WD	200	#define CFG_ATA_BASE_ADDR 0xF0100000
c837dcb1 WD	201	#define CFG_ATA_IDE0_OFFSET 0x0000
c609719b WD	202
c609719b WD	203	#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
c837dcb1	204	#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
c609719b WD	205	#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
	206
	207	/*-----------------------------------------------------------------------
	208	* Start addresses for the final memory configuration
	209	* (Set up by the startup code)
	210	* Please note that CFG_SDRAM_BASE _must_ start at 0
	211	*/
	212	#define CFG_SDRAM_BASE 0x00000000
	213	#define CFG_FLASH_BASE 0xFFFC0000
	214	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	215	#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
	216	#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
	217
	218	/*
	219	* For booting Linux, the board info and command line data
	220	* have to be in the first 8 MB of memory, since this is
	221	* the maximum mapped by the Linux kernel during initialization.
	222	*/
	223	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
ac53ee83 MF	224
	225	#define CONFIG_OF_LIBFDT
	226	#define CONFIG_OF_BOARD_SETUP
	227
c609719b WD	228	/*-----------------------------------------------------------------------
	229	* FLASH organization
	230	*/
	231	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
	232	#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
	233
	234	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	235	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
	236
c837dcb1 WD	237	#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
	238	#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
	239	#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
c609719b WD	240	/*
	241	* The following defines are added for buggy IOP480 byte interface.
	242	* All other boards should use the standard values (CPCI405 etc.)
	243	*/
c837dcb1 WD	244	#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
	245	#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
	246	#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
c609719b	247
c837dcb1	248	#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
c609719b	249
c609719b WD	250	#if 0 /* Use NVRAM for environment variables */
	251	/*-----------------------------------------------------------------------
	252	* NVRAM organization
	253	*/
9314cee6	254	#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
0e8d1586 JCPV	255	#define CONFIG_ENV_SIZE 0x0ff8 /* Size of Environment vars */
	256	#define CONFIG_ENV_ADDR \
	257	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CONFIG_ENV_SIZE+8)) /* Env */
c609719b WD	258
	259	#else /* Use EEPROM for environment variables */
	260
bb1f8b4f	261	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
0e8d1586 JCPV	262	#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
0e8d1586 JCPV	263	#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/
8bde7f77	264	/* total size of a CAT24WC16 is 2048 bytes */
c609719b WD	265	#endif
	266
	267	#define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
	268	#define CFG_NVRAM_SIZE (321024) / NVRAM size */
a20b27a3	269	#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+0x6900) /* VxWorks eth-addr*/
c609719b WD	270
	271	/*-----------------------------------------------------------------------
	272	* I2C EEPROM (CAT24WC16) for environment
	273	*/
	274	#define CONFIG_HARD_I2C /* I2c with hardware support */
	275	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	276	#define CFG_I2C_SLAVE 0x7F
	277
	278	#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
c837dcb1 WD	279	#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
c837dcb1 WD	280	/* mask of address bits that overflow into the "EEPROM chip address" */
c609719b WD	281	#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
	282	#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
	283	/* 16 byte page write mode using*/
c837dcb1	284	/* last 4 bits of the address */
c609719b	285	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
c609719b	286
c609719b WD	287	/*
	288	* Init Memory Controller:
	289	*
	290	* BR0/1 and OR0/1 (FLASH)
	291	*/
	292
	293	#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
	294	#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
	295
	296	/*-----------------------------------------------------------------------
	297	* External Bus Controller (EBC) Setup
	298	*/
	299
c837dcb1 WD	300	/* Memory Bank 0 (Flash Bank 0) initialization */
	301	#define CFG_EBC_PB0AP 0x92015480
	302	#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
c609719b	303
c837dcb1 WD	304	/* Memory Bank 1 (Flash Bank 1) initialization */
	305	#define CFG_EBC_PB1AP 0x92015480
	306	#define CFG_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
c609719b	307
c837dcb1 WD	308	/* Memory Bank 2 (CAN0, 1) initialization */
	309	#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
	310	#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
	311	#define CFG_LED_ADDR 0xF0000380
c609719b	312
c837dcb1 WD	313	/* Memory Bank 3 (CompactFlash IDE) initialization */
	314	#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
	315	#define CFG_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
c609719b	316
c837dcb1 WD	317	/* Memory Bank 4 (NVRAM/RTC) initialization */
	318	/#define CFG_EBC_PB4AP 0x01805280 / TWT=3,WBN=1,WBF=1,TH=1,SOR=1 */
	319	#define CFG_EBC_PB4AP 0x01805680 /* TWT=3,WBN=1,WBF=1,TH=3,SOR=1 */
	320	#define CFG_EBC_PB4CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
c609719b	321
c837dcb1 WD	322	/* Memory Bank 5 (optional Quart) initialization */
	323	#define CFG_EBC_PB5AP 0x04005B80 /* TWT=8,WBN=1,WBF=1,TH=5,RE=1,SOR=1*/
	324	#define CFG_EBC_PB5CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
c609719b	325
c837dcb1 WD	326	/* Memory Bank 6 (FPGA internal) initialization */
	327	#define CFG_EBC_PB6AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
	328	#define CFG_EBC_PB6CR 0xF041A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
	329	#define CFG_FPGA_BASE_ADDR 0xF0400000
c609719b WD	330
	331	/*-----------------------------------------------------------------------
	332	* FPGA stuff
	333	*/
	334	/* FPGA internal regs */
c837dcb1 WD	335	#define CFG_FPGA_MODE 0x00
	336	#define CFG_FPGA_STATUS 0x02
	337	#define CFG_FPGA_TS 0x04
	338	#define CFG_FPGA_TS_LOW 0x06
	339	#define CFG_FPGA_TS_CAP0 0x10
	340	#define CFG_FPGA_TS_CAP0_LOW 0x12
	341	#define CFG_FPGA_TS_CAP1 0x14
	342	#define CFG_FPGA_TS_CAP1_LOW 0x16
	343	#define CFG_FPGA_TS_CAP2 0x18
	344	#define CFG_FPGA_TS_CAP2_LOW 0x1a
	345	#define CFG_FPGA_TS_CAP3 0x1c
	346	#define CFG_FPGA_TS_CAP3_LOW 0x1e
c609719b WD	347
c609719b WD	348	/* FPGA Mode Reg */
c837dcb1	349	#define CFG_FPGA_MODE_CF_RESET 0x0001
6f4474e8 SR	350	#define CFG_FPGA_MODE_DUART_RESET 0x0002
6f4474e8 SR	351	#define CFG_FPGA_MODE_ENABLE_OUTPUT 0x0004 /* only set on CPCI-405 Ver 3 */
c609719b WD	352	#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
c609719b WD	353	#define CFG_FPGA_MODE_TS_IRQ_CLEAR 0x1000
c837dcb1	354	#define CFG_FPGA_MODE_TS_CLEAR 0x2000
c609719b WD	355
c609719b WD	356	/* FPGA Status Reg */
c837dcb1 WD	357	#define CFG_FPGA_STATUS_DIP0 0x0001
	358	#define CFG_FPGA_STATUS_DIP1 0x0002
	359	#define CFG_FPGA_STATUS_DIP2 0x0004
	360	#define CFG_FPGA_STATUS_FLASH 0x0008
	361	#define CFG_FPGA_STATUS_TS_IRQ 0x1000
c609719b	362
c837dcb1 WD	363	#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
c837dcb1 WD	364	#define CFG_FPGA_MAX_SIZE 321024 / 32kByte is enough for XC2S15 */
c609719b WD	365
c609719b WD	366	/* FPGA program pin configuration */
c837dcb1 WD	367	#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
	368	#define CFG_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
	369	#define CFG_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
	370	#define CFG_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */
	371	#define CFG_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */
c609719b WD	372
	373	/*-----------------------------------------------------------------------
	374	* Definitions for initial stack pointer and data area (in data cache)
	375	*/
c837dcb1	376	#define CFG_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
c609719b	377
c837dcb1 WD	378	#define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */
c837dcb1 WD	379	#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
c609719b WD	380	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
c609719b WD	381	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
c837dcb1	382	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
c609719b WD	383
	384
	385	/*
	386	* Internal Definitions
	387	*
	388	* Boot Flags
	389	*/
	390	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	391	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	392
	393	#endif /* __CONFIG_H */