[people/ms/u-boot.git] / include / configs / M5373EVB.h

/*
 * Configuation settings for the Freescale MCF5373 FireEngine board.
 *
 * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef _M5373EVB_H
#define _M5373EVB_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT		(0)

#undef CONFIG_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT	3360	/* timeout in ms, max is 3.36 sec */

/* Command line configuration */
#define CONFIG_CMD_REGINFO

#ifdef CONFIG_NANDFLASH_SIZE
#      define CONFIG_CMD_NAND
#endif

#define CONFIG_SYS_UNIFY_CACHE

#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
#	define CONFIG_MII		1
#	define CONFIG_MII_INIT		1
#	define CONFIG_SYS_DISCOVER_PHY
#	define CONFIG_SYS_RX_ETH_BUFFER	8
#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN

#	define CONFIG_SYS_FEC0_PINMUX		0
#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
#	define MCFFEC_TOUT_LOOP		50000
/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
#	ifndef CONFIG_SYS_DISCOVER_PHY
#		define FECDUPLEX	FULL
#		define FECSPEED		_100BASET
#	else
#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#		endif
#	endif			/* CONFIG_SYS_DISCOVER_PHY */
#endif

#define CONFIG_MCFRTC
#undef RTC_DEBUG

/* Timer */
#define CONFIG_MCFTMR
#undef CONFIG_MCFPIT

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	80000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR

#define CONFIG_UDP_CHECKSUM

#ifdef CONFIG_MCFFEC
#	define CONFIG_IPADDR	192.162.1.2
#	define CONFIG_NETMASK	255.255.255.0
#	define CONFIG_SERVERIP	192.162.1.1
#	define CONFIG_GATEWAYIP	192.162.1.1
#endif				/* FEC_ENET */

#define CONFIG_HOSTNAME		M5373EVB
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"			\
	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"	\
	"u-boot=u-boot.bin\0"	\
	"load=tftp ${loadaddr) ${u-boot}\0"	\
	"upd=run load; run prog\0"	\
	"prog=prot off 0 3ffff;"	\
	"era 0 3ffff;"	\
	"cp.b ${loadaddr} 0 ${filesize};"	\
	"save\0"	\
	""

#define CONFIG_PRAM		512	/* 512 KB */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#ifdef CONFIG_CMD_KGDB
#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
#else
#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
#endif

#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
#define CONFIG_SYS_LOAD_ADDR		0x40010000

#define CONFIG_SYS_CLK			80000000
#define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3

#define CONFIG_SYS_MBAR		0xFC000000

#define CONFIG_SYS_LATCH_ADDR		(CONFIG_SYS_CS1_BASE + 0x80000)

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in internal SRAM */
#define CONFIG_SYS_INIT_RAM_CTRL	0x221
#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x40000000
#define CONFIG_SYS_SDRAM_SIZE		32	/* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_CFG1		0x53722730
#define CONFIG_SYS_SDRAM_CFG2		0x56670000
#define CONFIG_SYS_SDRAM_CTRL		0xE1092000
#define CONFIG_SYS_SDRAM_EMOD		0x40010000
#define CONFIG_SYS_SDRAM_MODE		0x018D0000

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)

#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */

#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization ??
 */
#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
#define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI
#	define CONFIG_FLASH_CFI_DRIVER	1
#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
#endif

#ifdef CONFIG_NANDFLASH_SIZE
#	define CONFIG_SYS_MAX_NAND_DEVICE	1
#	define CONFIG_SYS_NAND_BASE		CONFIG_SYS_CS2_BASE
#	define CONFIG_SYS_NAND_SIZE		1
#	define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
#	define NAND_ALLOW_ERASE_ALL	1
#	define CONFIG_JFFS2_NAND	1
#	define CONFIG_JFFS2_DEV		"nand0"
#	define CONFIG_JFFS2_PART_SIZE	(CONFIG_SYS_CS2_MASK & ~1)
#	define CONFIG_JFFS2_PART_OFFSET	0x00000000
#endif

#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE

/* Configuration for environment
 * Environment is embedded in u-boot in the second sector of the flash
 */
#define CONFIG_ENV_OFFSET		0x4000
#define CONFIG_ENV_SECT_SIZE	0x2000
#define CONFIG_ENV_IS_IN_FLASH	1

#define LDS_BOARD_TEXT \
        . = DEFINED(env_offset) ? env_offset : .; \
        common/env_embedded.o (.text*);

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	16

#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 8)
#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 4)
#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
					 CF_ACR_EN | CF_ACR_SM_ALL)
#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
					 CF_CACR_DCM_P)

/*-----------------------------------------------------------------------
 * Chipselect bank definitions
 */
/*
 * CS0 - NOR Flash 1, 2, 4, or 8MB
 * CS1 - CompactFlash and registers
 * CS2 - NAND Flash 16, 32, or 64MB
 * CS3 - Available
 * CS4 - Available
 * CS5 - Available
 */
#define CONFIG_SYS_CS0_BASE		0
#define CONFIG_SYS_CS0_MASK		0x007f0001
#define CONFIG_SYS_CS0_CTRL		0x00001fa0

#define CONFIG_SYS_CS1_BASE		0x10000000
#define CONFIG_SYS_CS1_MASK		0x001f0001
#define CONFIG_SYS_CS1_CTRL		0x002A3780

#ifdef CONFIG_NANDFLASH_SIZE
#define CONFIG_SYS_CS2_BASE		0x20000000
#define CONFIG_SYS_CS2_MASK		((CONFIG_NANDFLASH_SIZE << 20) | 1)
#define CONFIG_SYS_CS2_CTRL		0x00001f60
#endif

#endif				/* _M5373EVB_H */
Commit	Line	Data
aa5f1f9d TL	1	/*
	2	* Configuation settings for the Freescale MCF5373 FireEngine board.
	3	*
2ee03c6e	4	* Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
aa5f1f9d TL	5	* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
aa5f1f9d TL	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
aa5f1f9d TL	8	*/
	9
	10	/*
	11	* board/config.h - configuration options, board specific
	12	*/
	13
	14	#ifndef _M5373EVB_H
	15	#define _M5373EVB_H
	16
	17	/*
	18	* High Level Configuration Options
	19	* (easy to change)
	20	*/
aa5f1f9d	21
aa5f1f9d	22	#define CONFIG_MCFUART
6d0f6bcf	23	#define CONFIG_SYS_UART_PORT (0)
aa5f1f9d TL	24
	25	#undef CONFIG_WATCHDOG
	26	#define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */
	27
	28	/* Command line configuration */
aa5f1f9d TL	29	#define CONFIG_CMD_REGINFO
aa5f1f9d TL	30
2ee03c6e	31	#ifdef CONFIG_NANDFLASH_SIZE
aa5f1f9d TL	32	# define CONFIG_CMD_NAND
	33	#endif
	34
6d0f6bcf	35	#define CONFIG_SYS_UNIFY_CACHE
aa5f1f9d TL	36
	37	#define CONFIG_MCFFEC
	38	#ifdef CONFIG_MCFFEC
aa5f1f9d	39	# define CONFIG_MII 1
0f3ba7e9	40	# define CONFIG_MII_INIT 1
6d0f6bcf JCPV	41	# define CONFIG_SYS_DISCOVER_PHY
	42	# define CONFIG_SYS_RX_ETH_BUFFER 8
	43	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
aa5f1f9d	44
6d0f6bcf JCPV	45	# define CONFIG_SYS_FEC0_PINMUX 0
6d0f6bcf JCPV	46	# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
53677ef1	47	# define MCFFEC_TOUT_LOOP 50000
6d0f6bcf JCPV	48	/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
6d0f6bcf JCPV	49	# ifndef CONFIG_SYS_DISCOVER_PHY
aa5f1f9d TL	50	# define FECDUPLEX FULL
	51	# define FECSPEED _100BASET
	52	# else
6d0f6bcf JCPV	53	# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
6d0f6bcf JCPV	54	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
aa5f1f9d	55	# endif
6d0f6bcf	56	# endif /* CONFIG_SYS_DISCOVER_PHY */
aa5f1f9d TL	57	#endif
	58
	59	#define CONFIG_MCFRTC
	60	#undef RTC_DEBUG
	61
	62	/* Timer */
	63	#define CONFIG_MCFTMR
	64	#undef CONFIG_MCFPIT
	65
	66	/* I2C */
00f792e0 HS	67	#define CONFIG_SYS_I2C
	68	#define CONFIG_SYS_I2C_FSL
	69	#define CONFIG_SYS_FSL_I2C_SPEED 80000
	70	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	71	#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000
6d0f6bcf	72	#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
aa5f1f9d	73
aa5f1f9d TL	74	#define CONFIG_UDP_CHECKSUM
	75
	76	#ifdef CONFIG_MCFFEC
aa5f1f9d TL	77	# define CONFIG_IPADDR 192.162.1.2
	78	# define CONFIG_NETMASK 255.255.255.0
	79	# define CONFIG_SERVERIP 192.162.1.1
	80	# define CONFIG_GATEWAYIP 192.162.1.1
aa5f1f9d TL	81	#endif /* FEC_ENET */
	82
	83	#define CONFIG_HOSTNAME M5373EVB
	84	#define CONFIG_EXTRA_ENV_SETTINGS \
	85	"netdev=eth0\0" \
5368c55d	86	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
aa5f1f9d TL	87	"u-boot=u-boot.bin\0" \
	88	"load=tftp ${loadaddr) ${u-boot}\0" \
	89	"upd=run load; run prog\0" \
09933fb0 JJ	90	"prog=prot off 0 3ffff;" \
09933fb0 JJ	91	"era 0 3ffff;" \
aa5f1f9d TL	92	"cp.b ${loadaddr} 0 ${filesize};" \
	93	"save\0" \
	94	""
	95
	96	#define CONFIG_PRAM 512 /* 512 KB */
6d0f6bcf	97	#define CONFIG_SYS_LONGHELP /* undef to save memory */
aa5f1f9d TL	98
aa5f1f9d TL	99	#ifdef CONFIG_CMD_KGDB
6d0f6bcf	100	# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
aa5f1f9d	101	#else
6d0f6bcf	102	# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
aa5f1f9d TL	103	#endif
aa5f1f9d TL	104
6d0f6bcf JCPV	105	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	106	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	107	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	108	#define CONFIG_SYS_LOAD_ADDR 0x40010000
aa5f1f9d	109
6d0f6bcf JCPV	110	#define CONFIG_SYS_CLK 80000000
6d0f6bcf JCPV	111	#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
aa5f1f9d	112
6d0f6bcf	113	#define CONFIG_SYS_MBAR 0xFC000000
aa5f1f9d	114
6d0f6bcf	115	#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)
aa5f1f9d TL	116
	117	/*
	118	* Low Level Configuration Settings
	119	* (address mappings, register initial values, etc.)
	120	* You should know what you are doing if you make changes here.
	121	*/
	122	/*-----------------------------------------------------------------------
	123	* Definitions for initial stack pointer and data area (in DPRAM)
	124	*/
6d0f6bcf	125	#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
553f0982	126	#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */
6d0f6bcf	127	#define CONFIG_SYS_INIT_RAM_CTRL 0x221
25ddd1fb	128	#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
6d0f6bcf	129	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
aa5f1f9d TL	130
	131	/*-----------------------------------------------------------------------
	132	* Start addresses for the final memory configuration
	133	* (Set up by the startup code)
6d0f6bcf	134	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
aa5f1f9d	135	*/
6d0f6bcf JCPV	136	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	137	#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */
	138	#define CONFIG_SYS_SDRAM_CFG1 0x53722730
	139	#define CONFIG_SYS_SDRAM_CFG2 0x56670000
	140	#define CONFIG_SYS_SDRAM_CTRL 0xE1092000
	141	#define CONFIG_SYS_SDRAM_EMOD 0x40010000
	142	#define CONFIG_SYS_SDRAM_MODE 0x018D0000
aa5f1f9d	143
6d0f6bcf JCPV	144	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
6d0f6bcf JCPV	145	#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
aa5f1f9d	146
6d0f6bcf JCPV	147	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
6d0f6bcf JCPV	148	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
aa5f1f9d	149
6d0f6bcf JCPV	150	#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
6d0f6bcf JCPV	151	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
aa5f1f9d TL	152
	153	/*
	154	* For booting Linux, the board info and command line data
	155	* have to be in the first 8 MB of memory, since this is
	156	* the maximum mapped by the Linux kernel during initialization ??
	157	*/
6d0f6bcf	158	#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
d6e4baf4	159	#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20)
aa5f1f9d TL	160
	161	/*-----------------------------------------------------------------------
	162	* FLASH organization
	163	*/
6d0f6bcf JCPV	164	#define CONFIG_SYS_FLASH_CFI
6d0f6bcf JCPV	165	#ifdef CONFIG_SYS_FLASH_CFI
00b1883a	166	# define CONFIG_FLASH_CFI_DRIVER 1
6d0f6bcf JCPV	167	# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */
	168	# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	169	# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	170	# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
	171	# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
aa5f1f9d TL	172	#endif
aa5f1f9d TL	173
2ee03c6e	174	#ifdef CONFIG_NANDFLASH_SIZE
6d0f6bcf JCPV	175	# define CONFIG_SYS_MAX_NAND_DEVICE 1
	176	# define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE
	177	# define CONFIG_SYS_NAND_SIZE 1
	178	# define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
aa5f1f9d TL	179	# define NAND_ALLOW_ERASE_ALL 1
	180	# define CONFIG_JFFS2_NAND 1
	181	# define CONFIG_JFFS2_DEV "nand0"
6d0f6bcf	182	# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1)
aa5f1f9d TL	183	# define CONFIG_JFFS2_PART_OFFSET 0x00000000
	184	#endif
	185
6d0f6bcf	186	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
aa5f1f9d TL	187
	188	/* Configuration for environment
	189	* Environment is embedded in u-boot in the second sector of the flash
	190	*/
0e8d1586 JCPV	191	#define CONFIG_ENV_OFFSET 0x4000
0e8d1586 JCPV	192	#define CONFIG_ENV_SECT_SIZE 0x2000
5a1aceb0	193	#define CONFIG_ENV_IS_IN_FLASH 1
aa5f1f9d	194
5296cb1d	195	#define LDS_BOARD_TEXT \
	196	. = DEFINED(env_offset) ? env_offset : .; \
	197	common/env_embedded.o (.text*);
	198
aa5f1f9d TL	199	/*-----------------------------------------------------------------------
	200	* Cache Configuration
	201	*/
6d0f6bcf	202	#define CONFIG_SYS_CACHELINE_SIZE 16
aa5f1f9d	203
dd9f054e	204	#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	205	CONFIG_SYS_INIT_RAM_SIZE - 8)
dd9f054e	206	#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	207	CONFIG_SYS_INIT_RAM_SIZE - 4)
dd9f054e TL	208	#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
	209	#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE \| \
	210	CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) \| \
	211	CF_ACR_EN \| CF_ACR_SM_ALL)
	212	#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC \| CF_CACR_CINVA \| \
	213	CF_CACR_DCM_P)
	214
aa5f1f9d TL	215	/*-----------------------------------------------------------------------
	216	* Chipselect bank definitions
	217	*/
	218	/*
	219	* CS0 - NOR Flash 1, 2, 4, or 8MB
	220	* CS1 - CompactFlash and registers
	221	* CS2 - NAND Flash 16, 32, or 64MB
	222	* CS3 - Available
	223	* CS4 - Available
	224	* CS5 - Available
	225	*/
6d0f6bcf JCPV	226	#define CONFIG_SYS_CS0_BASE 0
	227	#define CONFIG_SYS_CS0_MASK 0x007f0001
	228	#define CONFIG_SYS_CS0_CTRL 0x00001fa0
aa5f1f9d	229
6d0f6bcf JCPV	230	#define CONFIG_SYS_CS1_BASE 0x10000000
	231	#define CONFIG_SYS_CS1_MASK 0x001f0001
	232	#define CONFIG_SYS_CS1_CTRL 0x002A3780
aa5f1f9d	233
2ee03c6e	234	#ifdef CONFIG_NANDFLASH_SIZE
6d0f6bcf	235	#define CONFIG_SYS_CS2_BASE 0x20000000
2ee03c6e	236	#define CONFIG_SYS_CS2_MASK ((CONFIG_NANDFLASH_SIZE << 20) \| 1)
6d0f6bcf	237	#define CONFIG_SYS_CS2_CTRL 0x00001f60
aa5f1f9d TL	238	#endif
	239
	240	#endif /* _M5373EVB_H */