[people/ms/u-boot.git] / include / configs / M54451EVB.h

/*
 * Configuation settings for the Freescale MCF54451 EVB board.
 *
 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef _M54451EVB_H
#define _M54451EVB_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_M54451EVB	/* M54451EVB board */

#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT		(0)
#define CONFIG_BAUDRATE		115200

#undef CONFIG_WATCHDOG

#define CONFIG_TIMESTAMP	/* Print image info with timestamp */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/* Command line configuration */
#define CONFIG_CMD_DATE
#undef CONFIG_CMD_JFFS2
#define CONFIG_CMD_REGINFO

/* Network configuration */
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
#	define CONFIG_MII		1
#	define CONFIG_MII_INIT		1
#	define CONFIG_SYS_DISCOVER_PHY
#	define CONFIG_SYS_RX_ETH_BUFFER	8
#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN

#	define CONFIG_SYS_FEC0_PINMUX	0
#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
#	define MCFFEC_TOUT_LOOP 50000

#	define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
#	define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
#	define CONFIG_ETHPRIME		"FEC0"
#	define CONFIG_IPADDR		192.162.1.2
#	define CONFIG_NETMASK		255.255.255.0
#	define CONFIG_SERVERIP		192.162.1.1
#	define CONFIG_GATEWAYIP		192.162.1.1

/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
#	ifndef CONFIG_SYS_DISCOVER_PHY
#		define FECDUPLEX	FULL
#		define FECSPEED		_100BASET
#	else
#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#		endif
#	endif			/* CONFIG_SYS_DISCOVER_PHY */
#endif

#define CONFIG_HOSTNAME		M54451EVB
#ifdef CONFIG_SYS_STMICRO_BOOT
/* ST Micro serial flash */
#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
	"loadaddr=0x40010000\0"			\
	"sbfhdr=sbfhdr.bin\0"			\
	"uboot=u-boot.bin\0"			\
	"load=tftp ${loadaddr} ${sbfhdr};"	\
	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
	"upd=run load; run prog\0"		\
	"prog=sf probe 0:1 1000000 3;"		\
	"sf erase 0 30000;"			\
	"sf write ${loadaddr} 0 30000;"		\
	"save\0"				\
	""
#else
#define CONFIG_SYS_UBOOT_END	0x3FFFF
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"netdev=eth0\0"				\
	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
	"loadaddr=40010000\0"			\
	"u-boot=u-boot.bin\0"			\
	"load=tftp ${loadaddr) ${u-boot}\0"	\
	"upd=run load; run prog\0"		\
	"prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END)	\
	"; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;"	\
	"cp.b ${loadaddr} 0 ${filesize};"	\
	"save\0"				\
	""
#endif

/* Realtime clock */
#define CONFIG_MCFRTC
#undef RTC_DEBUG
#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)

/* Timer */
#define CONFIG_MCFTMR
#undef CONFIG_MCFPIT

/* I2c */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	80000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR

/* DSPI and Serial Flash */
#define CONFIG_CF_SPI
#define CONFIG_CF_DSPI
#define CONFIG_SERIAL_FLASH
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE		0x7
#ifdef CONFIG_CMD_SPI

#	define CONFIG_SYS_DSPI_CTAR0	(DSPI_CTAR_TRSZ(7) | \
					 DSPI_CTAR_PCSSCK_1CLK | \
					 DSPI_CTAR_PASC(0) | \
					 DSPI_CTAR_PDT(0) | \
					 DSPI_CTAR_CSSCK(0) | \
					 DSPI_CTAR_ASC(0) | \
					 DSPI_CTAR_DT(1))
#	define CONFIG_SYS_DSPI_CTAR1	(CONFIG_SYS_DSPI_CTAR0)
#	define CONFIG_SYS_DSPI_CTAR2	(CONFIG_SYS_DSPI_CTAR0)
#endif

/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK

#define CONFIG_PRAM			2048	/* 2048 KB */

#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE			1024	/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE			256	/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */

#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)

#define CONFIG_SYS_MBAR			0xFC000000

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in internal SRAM */
#define CONFIG_SYS_INIT_RAM_CTRL	0x221
#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x40000000
#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_CFG1		0x33633F30
#define CONFIG_SYS_SDRAM_CFG2		0x57670000
#define CONFIG_SYS_SDRAM_CTRL		0xE20D2C00
#define CONFIG_SYS_SDRAM_EMOD		0x80810000
#define CONFIG_SYS_SDRAM_MODE		0x008D0000
#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x44

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)

#ifdef CONFIG_CF_SBF
#	define CONFIG_SERIAL_BOOT
#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
#else
#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
#endif
#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */

/* Reserve 256 kB for malloc() */
#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization ??
 */
/* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))

/* Configuration for environment
 * Environment is not embedded in u-boot. First time runing may have env
 * crc error warning if there is no correct environment on the flash.
 */
#if defined(CONFIG_SYS_STMICRO_BOOT)
#	define CONFIG_ENV_IS_IN_SPI_FLASH	1
#	define CONFIG_ENV_SPI_CS		1
#	define CONFIG_ENV_OFFSET		0x20000
#	define CONFIG_ENV_SIZE		0x2000
#	define CONFIG_ENV_SECT_SIZE	0x10000
#else
#	define CONFIG_ENV_IS_IN_FLASH	1
#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
#	define CONFIG_ENV_SIZE		0x2000
#	define CONFIG_ENV_SECT_SIZE	0x20000
#endif
#undef CONFIG_ENV_OVERWRITE

/* FLASH organization */
#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE

#define CONFIG_SYS_FLASH_CFI
#ifdef CONFIG_SYS_FLASH_CFI

#	define CONFIG_FLASH_CFI_DRIVER	1
#	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
#	define CONFIG_SYS_FLASH_CHECKSUM
#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }

#endif

/*
 * This is setting for JFFS2 support in u-boot.
 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 */
#ifdef CONFIG_CMD_JFFS2
#	define CONFIG_JFFS2_DEV		"nor0"
#	define CONFIG_JFFS2_PART_SIZE	0x01000000
#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
#endif

/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE		16

#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 8)
#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - 4)
#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
					 CF_ACR_EN | CF_ACR_SM_ALL)
#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
					 CF_CACR_ICINVA | CF_CACR_EUSP)
#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
					 CF_CACR_DEC | CF_CACR_DDCM_P | \
					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)

/*-----------------------------------------------------------------------
 * Memory bank definitions
 */
/*
 * CS0 - NOR Flash 16MB
 * CS1 - Available
 * CS2 - Available
 * CS3 - Available
 * CS4 - Available
 * CS5 - Available
 */

 /* Flash */
#define CONFIG_SYS_CS0_BASE		0x00000000
#define CONFIG_SYS_CS0_MASK		0x00FF0001
#define CONFIG_SYS_CS0_CTRL		0x00004D80

#define CONFIG_SYS_SPANSION_BASE	CONFIG_SYS_CS0_BASE

#endif				/* _M54451EVB_H */
Commit	Line	Data
05316f8e TL	1	/*
	2	* Configuation settings for the Freescale MCF54451 EVB board.
	3	*
	4	* Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
	5	* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
05316f8e TL	8	*/
	9
	10	/*
	11	* board/config.h - configuration options, board specific
	12	*/
	13
	14	#ifndef _M54451EVB_H
	15	#define _M54451EVB_H
	16
	17	/*
	18	* High Level Configuration Options
	19	* (easy to change)
	20	*/
05316f8e TL	21	#define CONFIG_M54451EVB /* M54451EVB board */
05316f8e TL	22
1313db48 AW	23	#define CONFIG_DISPLAY_BOARDINFO
1313db48 AW	24
05316f8e	25	#define CONFIG_MCFUART
6d0f6bcf	26	#define CONFIG_SYS_UART_PORT (0)
05316f8e	27	#define CONFIG_BAUDRATE 115200
05316f8e TL	28
	29	#undef CONFIG_WATCHDOG
	30
	31	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	32
	33	/*
	34	* BOOTP options
	35	*/
	36	#define CONFIG_BOOTP_BOOTFILESIZE
	37	#define CONFIG_BOOTP_BOOTPATH
	38	#define CONFIG_BOOTP_GATEWAY
	39	#define CONFIG_BOOTP_HOSTNAME
	40
	41	/* Command line configuration */
05316f8e	42	#define CONFIG_CMD_DATE
05316f8e	43	#undef CONFIG_CMD_JFFS2
05316f8e	44	#define CONFIG_CMD_REGINFO
05316f8e TL	45
	46	/* Network configuration */
	47	#define CONFIG_MCFFEC
	48	#ifdef CONFIG_MCFFEC
05316f8e TL	49	# define CONFIG_MII 1
05316f8e TL	50	# define CONFIG_MII_INIT 1
6d0f6bcf JCPV	51	# define CONFIG_SYS_DISCOVER_PHY
	52	# define CONFIG_SYS_RX_ETH_BUFFER 8
	53	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
05316f8e	54
6d0f6bcf JCPV	55	# define CONFIG_SYS_FEC0_PINMUX 0
6d0f6bcf JCPV	56	# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
05316f8e TL	57	# define MCFFEC_TOUT_LOOP 50000
	58
	59	# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
052c0891	60	# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)"
05316f8e TL	61	# define CONFIG_ETHPRIME "FEC0"
	62	# define CONFIG_IPADDR 192.162.1.2
	63	# define CONFIG_NETMASK 255.255.255.0
	64	# define CONFIG_SERVERIP 192.162.1.1
	65	# define CONFIG_GATEWAYIP 192.162.1.1
05316f8e	66
6d0f6bcf JCPV	67	/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
6d0f6bcf JCPV	68	# ifndef CONFIG_SYS_DISCOVER_PHY
05316f8e TL	69	# define FECDUPLEX FULL
	70	# define FECSPEED _100BASET
	71	# else
6d0f6bcf JCPV	72	# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
6d0f6bcf JCPV	73	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
05316f8e	74	# endif
6d0f6bcf	75	# endif /* CONFIG_SYS_DISCOVER_PHY */
05316f8e TL	76	#endif
	77
	78	#define CONFIG_HOSTNAME M54451EVB
6d0f6bcf	79	#ifdef CONFIG_SYS_STMICRO_BOOT
05316f8e	80	/* ST Micro serial flash */
6d0f6bcf	81	#define CONFIG_SYS_LOAD_ADDR2 0x40010007
05316f8e TL	82	#define CONFIG_EXTRA_ENV_SETTINGS \
05316f8e TL	83	"netdev=eth0\0" \
5368c55d	84	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
05316f8e TL	85	"loadaddr=0x40010000\0" \
	86	"sbfhdr=sbfhdr.bin\0" \
	87	"uboot=u-boot.bin\0" \
	88	"load=tftp ${loadaddr} ${sbfhdr};" \
5368c55d	89	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \
05316f8e	90	"upd=run load; run prog\0" \
09933fb0	91	"prog=sf probe 0:1 1000000 3;" \
05316f8e TL	92	"sf erase 0 30000;" \
	93	"sf write ${loadaddr} 0 30000;" \
	94	"save\0" \
	95	""
	96	#else
6d0f6bcf	97	#define CONFIG_SYS_UBOOT_END 0x3FFFF
05316f8e TL	98	#define CONFIG_EXTRA_ENV_SETTINGS \
05316f8e TL	99	"netdev=eth0\0" \
5368c55d	100	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
05316f8e TL	101	"loadaddr=40010000\0" \
	102	"u-boot=u-boot.bin\0" \
	103	"load=tftp ${loadaddr) ${u-boot}\0" \
	104	"upd=run load; run prog\0" \
5368c55d MV	105	"prog=prot off 0 " __stringify(CONFIG_SYS_UBOOT_END) \
5368c55d MV	106	"; era 0 " __stringify(CONFIG_SYS_UBOOT_END) " ;" \
05316f8e TL	107	"cp.b ${loadaddr} 0 ${filesize};" \
	108	"save\0" \
	109	""
	110	#endif
	111
	112	/* Realtime clock */
	113	#define CONFIG_MCFRTC
	114	#undef RTC_DEBUG
6d0f6bcf	115	#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ)
05316f8e TL	116
	117	/* Timer */
	118	#define CONFIG_MCFTMR
	119	#undef CONFIG_MCFPIT
	120
	121	/* I2c */
00f792e0 HS	122	#define CONFIG_SYS_I2C
	123	#define CONFIG_SYS_I2C_FSL
	124	#define CONFIG_SYS_FSL_I2C_SPEED 80000
	125	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	126	#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000
709b384b	127	#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
05316f8e TL	128
05316f8e TL	129	/* DSPI and Serial Flash */
ee0a8462	130	#define CONFIG_CF_SPI
05316f8e TL	131	#define CONFIG_CF_DSPI
	132	#define CONFIG_SERIAL_FLASH
	133	#define CONFIG_HARD_SPI
6d0f6bcf	134	#define CONFIG_SYS_SBFHDR_SIZE 0x7
05316f8e	135	#ifdef CONFIG_CMD_SPI
05316f8e	136
ee0a8462 TL	137	# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) \| \
	138	DSPI_CTAR_PCSSCK_1CLK \| \
	139	DSPI_CTAR_PASC(0) \| \
	140	DSPI_CTAR_PDT(0) \| \
	141	DSPI_CTAR_CSSCK(0) \| \
	142	DSPI_CTAR_ASC(0) \| \
	143	DSPI_CTAR_DT(1))
	144	# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
	145	# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
05316f8e TL	146	#endif
	147
	148	/* Input, PCI, Flexbus, and VCO */
	149	#define CONFIG_EXTRA_CLOCK
	150
709b384b	151	#define CONFIG_PRAM 2048 /* 2048 KB */
05316f8e	152
6d0f6bcf	153	#define CONFIG_SYS_LONGHELP /* undef to save memory */
05316f8e TL	154
05316f8e TL	155	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	156	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
05316f8e	157	#else
6d0f6bcf	158	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
05316f8e	159	#endif
6d0f6bcf JCPV	160	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	161	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	162	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
05316f8e	163
6d0f6bcf	164	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
05316f8e	165
709b384b	166	#define CONFIG_SYS_MBAR 0xFC000000
05316f8e TL	167
	168	/*
	169	* Low Level Configuration Settings
	170	* (address mappings, register initial values, etc.)
	171	* You should know what you are doing if you make changes here.
	172	*/
	173
	174	/*-----------------------------------------------------------------------
	175	* Definitions for initial stack pointer and data area (in DPRAM)
	176	*/
6d0f6bcf	177	#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
553f0982	178	#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */
6d0f6bcf	179	#define CONFIG_SYS_INIT_RAM_CTRL 0x221
25ddd1fb	180	#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
6d0f6bcf	181	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
553f0982	182	#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32)
05316f8e TL	183
	184	/*-----------------------------------------------------------------------
	185	* Start addresses for the final memory configuration
	186	* (Set up by the startup code)
6d0f6bcf	187	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
05316f8e	188	*/
6d0f6bcf JCPV	189	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	190	#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */
	191	#define CONFIG_SYS_SDRAM_CFG1 0x33633F30
	192	#define CONFIG_SYS_SDRAM_CFG2 0x57670000
	193	#define CONFIG_SYS_SDRAM_CTRL 0xE20D2C00
	194	#define CONFIG_SYS_SDRAM_EMOD 0x80810000
	195	#define CONFIG_SYS_SDRAM_MODE 0x008D0000
	196	#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0x44
	197
	198	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
	199	#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
05316f8e TL	200
05316f8e TL	201	#ifdef CONFIG_CF_SBF
09933fb0	202	# define CONFIG_SERIAL_BOOT
14d0a02a	203	# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
05316f8e	204	#else
6d0f6bcf	205	# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
05316f8e	206	#endif
6d0f6bcf JCPV	207	#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
6d0f6bcf JCPV	208	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
05316f8e	209
09933fb0 JJ	210	/* Reserve 256 kB for malloc() */
09933fb0 JJ	211	#define CONFIG_SYS_MALLOC_LEN (256 << 10)
05316f8e TL	212	/*
	213	* For booting Linux, the board info and command line data
	214	* have to be in the first 8 MB of memory, since this is
	215	* the maximum mapped by the Linux kernel during initialization ??
	216	*/
	217	/* Initial Memory map for Linux */
6d0f6bcf	218	#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
05316f8e TL	219
05316f8e TL	220	/* Configuration for environment
09933fb0 JJ	221	* Environment is not embedded in u-boot. First time runing may have env
09933fb0 JJ	222	* crc error warning if there is no correct environment on the flash.
05316f8e	223	*/
709b384b	224	#if defined(CONFIG_SYS_STMICRO_BOOT)
0b5099a8	225	# define CONFIG_ENV_IS_IN_SPI_FLASH 1
0e8d1586 JCPV	226	# define CONFIG_ENV_SPI_CS 1
	227	# define CONFIG_ENV_OFFSET 0x20000
	228	# define CONFIG_ENV_SIZE 0x2000
	229	# define CONFIG_ENV_SECT_SIZE 0x10000
05316f8e	230	#else
5a1aceb0	231	# define CONFIG_ENV_IS_IN_FLASH 1
09933fb0	232	# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
709b384b	233	# define CONFIG_ENV_SIZE 0x2000
09933fb0	234	# define CONFIG_ENV_SECT_SIZE 0x20000
05316f8e TL	235	#endif
05316f8e TL	236	#undef CONFIG_ENV_OVERWRITE
05316f8e	237
ee0a8462 TL	238	/* FLASH organization */
ee0a8462 TL	239	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
05316f8e	240
6d0f6bcf JCPV	241	#define CONFIG_SYS_FLASH_CFI
6d0f6bcf JCPV	242	#ifdef CONFIG_SYS_FLASH_CFI
05316f8e TL	243
05316f8e TL	244	# define CONFIG_FLASH_CFI_DRIVER 1
709b384b	245	# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
6d0f6bcf JCPV	246	# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
	247	# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
	248	# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	249	# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
	250	# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
	251	# define CONFIG_SYS_FLASH_CHECKSUM
	252	# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE }
05316f8e TL	253
	254	#endif
	255
	256	/*
	257	* This is setting for JFFS2 support in u-boot.
	258	* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
	259	*/
709b384b	260	#ifdef CONFIG_CMD_JFFS2
05316f8e TL	261	# define CONFIG_JFFS2_DEV "nor0"
05316f8e TL	262	# define CONFIG_JFFS2_PART_SIZE 0x01000000
6d0f6bcf	263	# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
05316f8e TL	264	#endif
05316f8e TL	265
709b384b	266	/* Cache Configuration */
6d0f6bcf	267	#define CONFIG_SYS_CACHELINE_SIZE 16
05316f8e	268
dd9f054e	269	#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	270	CONFIG_SYS_INIT_RAM_SIZE - 8)
dd9f054e	271	#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
553f0982	272	CONFIG_SYS_INIT_RAM_SIZE - 4)
dd9f054e TL	273	#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
	274	#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
	275	#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE \| \
	276	CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) \| \
	277	CF_ACR_EN \| CF_ACR_SM_ALL)
	278	#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC \| CF_CACR_IEC \| \
	279	CF_CACR_ICINVA \| CF_CACR_EUSP)
	280	#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR \| \
	281	CF_CACR_DEC \| CF_CACR_DDCM_P \| \
	282	CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
	283
05316f8e TL	284	/*-----------------------------------------------------------------------
	285	* Memory bank definitions
	286	*/
	287	/*
709b384b	288	* CS0 - NOR Flash 16MB
05316f8e TL	289	* CS1 - Available
	290	* CS2 - Available
	291	* CS3 - Available
	292	* CS4 - Available
	293	* CS5 - Available
	294	*/
	295
709b384b	296	/* Flash */
6d0f6bcf	297	#define CONFIG_SYS_CS0_BASE 0x00000000
709b384b TL	298	#define CONFIG_SYS_CS0_MASK 0x00FF0001
709b384b TL	299	#define CONFIG_SYS_CS0_CTRL 0x00004D80
05316f8e	300
6d0f6bcf	301	#define CONFIG_SYS_SPANSION_BASE CONFIG_SYS_CS0_BASE
05316f8e TL	302
05316f8e TL	303	#endif /* _M54451EVB_H */