[people/ms/u-boot.git] / include / configs / MPC8541CDS.h

/*
 * Copyright 2004 Freescale Semiconductor.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * mpc8541cds board configuration file
 *
 * Please refer to doc/README.mpc85xxcds for more info.
 *
 */
#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE */
#define CONFIG_E500		1	/* BOOKE e500 family */
#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41 */
#define CONFIG_CPM2		1	/* has CPM2 */
#define CONFIG_MPC8541		1	/* MPC8541 specific */
#define CONFIG_MPC8541CDS	1	/* MPC8541CDS board specific */

#define CONFIG_PCI
#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
#define CONFIG_TSEC_ENET		/* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

#define CONFIG_FSL_VIA

#ifndef __ASSEMBLY__
extern unsigned long get_clock_freq(void);
#endif
#define CONFIG_SYS_CLK_FREQ	get_clock_freq() /* sysclk for MPC85xx */

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
#define CONFIG_BTB			    /* toggle branch predition */

#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00400000

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */

/* DDR Setup */
#define CONFIG_FSL_DDR1
#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_SPD
#undef CONFIG_FSL_DDR_INTERACTIVE

#define CONFIG_MEM_INIT_VALUE		0xDeadBeef

#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)

/* I2C addresses of SPD EEPROMs */
#define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */

/*
 * Make sure required options are set
 */
#ifndef CONFIG_SPD_EEPROM
#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
#endif

#undef CONFIG_CLOCKS_IN_MHZ

/*
 * Local Bus Definitions
 */

/*
 * FLASH on the Local Bus
 * Two banks, 8M each, using the CFI driver.
 * Boot from BR0/OR0 bank at 0xff00_0000
 * Alternate BR1/OR1 bank at 0xff80_0000
 *
 * BR0, BR1:
 *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
 *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
 *    Port Size = 16 bits = BRx[19:20] = 10
 *    Use GPCM = BRx[24:26] = 000
 *    Valid = BRx[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
 * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
 *
 * OR0, OR1:
 *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
 *    Reserved ORx[17:18] = 11, confusion here?
 *    CSNT = ORx[20] = 1
 *    ACS = half cycle delay = ORx[21:22] = 11
 *    SCY = 6 = ORx[24:27] = 0110
 *    TRLX = use relaxed timing = ORx[29] = 1
 *    EAD = use external address latch delay = OR[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
 */

#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH 8M */

#define CONFIG_SYS_BR0_PRELIM		0xff801001
#define CONFIG_SYS_BR1_PRELIM		0xff001001

#define	CONFIG_SYS_OR0_PRELIM		0xff806e65
#define	CONFIG_SYS_OR1_PRELIM		0xff806e65

#define CONFIG_SYS_FLASH_BANKS_LIST	{0xff800000, CONFIG_SYS_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
#undef	CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO


/*
 * SDRAM on the Local Bus
 */
#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */

/*
 * Base Register 2 and Option Register 2 configure SDRAM.
 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
 *
 * For BR2, need:
 *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 *    port-size = 32-bits = BR2[19:20] = 11
 *    no parity checking = BR2[21:22] = 00
 *    SDRAM for MSEL = BR2[24:26] = 011
 *    Valid = BR[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 *
 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
 * FIXME: the top 17 bits of BR2.
 */

#define CONFIG_SYS_BR2_PRELIM          0xf0001861

/*
 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
 *
 * For OR2, need:
 *    64MB mask for AM, OR2[0:7] = 1111 1100
 *		   XAM, OR2[17:18] = 11
 *    9 columns OR2[19-21] = 010
 *    13 rows   OR2[23-25] = 100
 *    EAD set for extra time OR[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
 */

#define CONFIG_SYS_OR2_PRELIM		0xfc006901

#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg */
#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
#define CONFIG_SYS_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
#define CONFIG_SYS_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/

/*
 * Common settings for all Local Bus SDRAM commands.
 * At run time, either BSMA1516 (for CPU 1.1)
 *                  or BSMA1617 (for CPU 1.0) (old)
 * is OR'ed in too.
 */
#define CONFIG_SYS_LBC_LSDMR_COMMON	( LSDMR_RFCR16		\
				| LSDMR_PRETOACT7	\
				| LSDMR_ACTTORW7	\
				| LSDMR_BL8		\
				| LSDMR_WRC4		\
				| LSDMR_CL3		\
				| LSDMR_RFEN		\
				)

/*
 * The CADMUS registers are connected to CS3 on CDS.
 * The new memory map places CADMUS at 0xf8000000.
 *
 * For BR3, need:
 *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
 *    port-size = 8-bits  = BR[19:20] = 01
 *    no parity checking  = BR[21:22] = 00
 *    GPMC for MSEL       = BR[24:26] = 000
 *    Valid               = BR[31]    = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
 *
 * For OR3, need:
 *    1 MB mask for AM,   OR[0:16]  = 1111 1111 1111 0000 0
 *    disable buffer ctrl OR[19]    = 0
 *    CSNT                OR[20]    = 1
 *    ACS                 OR[21:22] = 11
 *    XACS                OR[23]    = 1
 *    SCY 15 wait states  OR[24:27] = 1111	max is suboptimal but safe
 *    SETA                OR[28]    = 0
 *    TRLX                OR[29]    = 1
 *    EHTR                OR[30]    = 1
 *    EAD extra time      OR[31]    = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
 */

#define CONFIG_FSL_CADMUS

#define CADMUS_BASE_ADDR 0xf8000000
#define CONFIG_SYS_BR3_PRELIM   0xf8000801
#define CONFIG_SYS_OR3_PRELIM   0xfff00ff7

#define CONFIG_SYS_INIT_RAM_LOCK	1
#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */

#define CONFIG_SYS_GBL_DATA_SIZE	128	    /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX     2
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE    1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef  CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1
#define CONFIG_OF_STDOUT_VIA_ALIAS	1

/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
#define CONFIG_SYS_I2C_OFFSET		0x3000

/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_CCID
#define CONFIG_SYS_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */
#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
#define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */

#define CONFIG_SYS_PCI2_MEM_VIRT	0xa0000000
#define CONFIG_SYS_PCI2_MEM_BUS	0xa0000000
#define CONFIG_SYS_PCI2_MEM_PHYS	0xa0000000
#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCI2_IO_VIRT	0xe2100000
#define CONFIG_SYS_PCI2_IO_BUS	0x00000000
#define CONFIG_SYS_PCI2_IO_PHYS	0xe2100000
#define CONFIG_SYS_PCI2_IO_SIZE	0x100000	/* 1M */

#ifdef CONFIG_LEGACY
#define BRIDGE_ID 17
#define VIA_ID 2
#else
#define BRIDGE_ID 28
#define VIA_ID 4
#endif

#if defined(CONFIG_PCI)

#define CONFIG_MPC85XX_PCI2
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#undef CONFIG_EEPRO100
#undef CONFIG_TULIP

#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */

#endif	/* CONFIG_PCI */


#if defined(CONFIG_TSEC_ENET)

#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI	1
#endif

#define CONFIG_MII		1	/* MII PHY management */
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"TSEC0"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"TSEC1"
#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		1
#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC2_FLAGS		TSEC_GIGABIT

/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME		"TSEC0"

#endif	/* CONFIG_TSEC_ENET */

/*
 * Environment
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
#define CONFIG_ENV_SIZE		0x2000

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_REGINFO

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled */

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 16 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/*
 * Environment Configuration
 */

/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_HAS_ETH0
#define CONFIG_ETHADDR   00:E0:0C:00:00:FD
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
#endif

#define CONFIG_IPADDR    192.168.1.253

#define CONFIG_HOSTNAME  unknown
#define CONFIG_ROOTPATH  /nfsroot
#define CONFIG_BOOTFILE  your.uImage

#define CONFIG_SERVERIP  192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
#define CONFIG_NETMASK   255.255.255.0

#define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/

#define CONFIG_BOOTDELAY 10       /* -1 disables auto-boot */
#undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/

#define CONFIG_BAUDRATE	115200

#define	CONFIG_EXTRA_ENV_SETTINGS				        \
   "netdev=eth0\0"                                                      \
   "consoledev=ttyS1\0"                                                 \
   "ramdiskaddr=600000\0"                                               \
   "ramdiskfile=your.ramdisk.u-boot\0"					\
   "fdtaddr=400000\0"							\
   "fdtfile=your.fdt.dtb\0"

#define CONFIG_NFSBOOTCOMMAND	                                        \
   "setenv bootargs root=/dev/nfs rw "                                  \
      "nfsroot=$serverip:$rootpath "                                    \
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
      "console=$consoledev,$baudrate $othbootargs;"                     \
   "tftp $loadaddr $bootfile;"                                          \
   "tftp $fdtaddr $fdtfile;"						\
   "bootm $loadaddr - $fdtaddr"

#define CONFIG_RAMBOOTCOMMAND \
   "setenv bootargs root=/dev/ram rw "                                  \
      "console=$consoledev,$baudrate $othbootargs;"                     \
   "tftp $ramdiskaddr $ramdiskfile;"                                    \
   "tftp $loadaddr $bootfile;"                                          \
   "bootm $loadaddr $ramdiskaddr"

#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
03f5c550 WD	1	/*
	2	* Copyright 2004 Freescale Semiconductor.
	3	*
	4	* See file CREDITS for list of people who contributed to this
	5	* project.
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License as
	9	* published by the Free Software Foundation; either version 2 of
	10	* the License, or (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	20	* MA 02111-1307 USA
	21	*/
	22
	23	/*
	24	* mpc8541cds board configuration file
	25	*
	26	* Please refer to doc/README.mpc85xxcds for more info.
	27	*
	28	*/
03f5c550 WD	29	#ifndef __CONFIG_H
	30	#define __CONFIG_H
	31
	32	/* High Level Configuration Options */
	33	#define CONFIG_BOOKE 1 /* BOOKE */
	34	#define CONFIG_E500 1 /* BOOKE e500 family */
	35	#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
9c4c5ae3	36	#define CONFIG_CPM2 1 /* has CPM2 */
03f5c550 WD	37	#define CONFIG_MPC8541 1 /* MPC8541 specific */
	38	#define CONFIG_MPC8541CDS 1 /* MPC8541CDS board specific */
	39
	40	#define CONFIG_PCI
0151cbac	41	#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
53677ef1	42	#define CONFIG_TSEC_ENET /* tsec ethernet support */
03f5c550	43	#define CONFIG_ENV_OVERWRITE
d9b94f28	44
2cfaa1aa	45	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
03f5c550	46
25eedb2c	47	#define CONFIG_FSL_VIA
25eedb2c	48
03f5c550 WD	49	#ifndef __ASSEMBLY__
	50	extern unsigned long get_clock_freq(void);
	51	#endif
	52	#define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */
	53
	54	/*
	55	* These can be toggled for performance analysis, otherwise use default.
	56	*/
53677ef1	57	#define CONFIG_L2_CACHE /* toggle L2 cache */
03f5c550	58	#define CONFIG_BTB /* toggle branch predition */
03f5c550	59
6d0f6bcf JCPV	60	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
6d0f6bcf JCPV	61	#define CONFIG_SYS_MEMTEST_END 0x00400000
03f5c550	62
03f5c550 WD	63	/*
	64	* Base addresses -- Note these are effective addresses where the
	65	* actual resources get mapped (not physical addresses)
	66	*/
6d0f6bcf JCPV	67	#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
	68	#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
	69	#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
	70	#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
03f5c550	71
aa11d85c JL	72	/* DDR Setup */
	73	#define CONFIG_FSL_DDR1
	74	#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
	75	#define CONFIG_DDR_SPD
	76	#undef CONFIG_FSL_DDR_INTERACTIVE
	77
	78	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	79
6d0f6bcf JCPV	80	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
6d0f6bcf JCPV	81	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
03f5c550	82
aa11d85c JL	83	#define CONFIG_NUM_DDR_CONTROLLERS 1
	84	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	85	#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
	86
	87	/* I2C addresses of SPD EEPROMs */
	88	#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
03f5c550 WD	89
	90	/*
	91	* Make sure required options are set
	92	*/
	93	#ifndef CONFIG_SPD_EEPROM
	94	#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
	95	#endif
	96
7202d43d JL	97	#undef CONFIG_CLOCKS_IN_MHZ
7202d43d JL	98
03f5c550	99	/*
7202d43d	100	* Local Bus Definitions
03f5c550	101	*/
7202d43d JL	102
	103	/*
	104	* FLASH on the Local Bus
	105	* Two banks, 8M each, using the CFI driver.
	106	* Boot from BR0/OR0 bank at 0xff00_0000
	107	* Alternate BR1/OR1 bank at 0xff80_0000
	108	*
	109	* BR0, BR1:
	110	* Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
	111	* Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
	112	* Port Size = 16 bits = BRx[19:20] = 10
	113	* Use GPCM = BRx[24:26] = 000
	114	* Valid = BRx[31] = 1
	115	*
	116	* 0 4 8 12 16 20 24 28
	117	* 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
	118	* 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
	119	*
	120	* OR0, OR1:
	121	* Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
	122	* Reserved ORx[17:18] = 11, confusion here?
	123	* CSNT = ORx[20] = 1
	124	* ACS = half cycle delay = ORx[21:22] = 11
	125	* SCY = 6 = ORx[24:27] = 0110
	126	* TRLX = use relaxed timing = ORx[29] = 1
	127	* EAD = use external address latch delay = OR[31] = 1
	128	*
	129	* 0 4 8 12 16 20 24 28
	130	* 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
	131	*/
	132
6d0f6bcf	133	#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 8M */
03f5c550	134
6d0f6bcf JCPV	135	#define CONFIG_SYS_BR0_PRELIM 0xff801001
6d0f6bcf JCPV	136	#define CONFIG_SYS_BR1_PRELIM 0xff001001
03f5c550	137
6d0f6bcf JCPV	138	#define CONFIG_SYS_OR0_PRELIM 0xff806e65
6d0f6bcf JCPV	139	#define CONFIG_SYS_OR1_PRELIM 0xff806e65
03f5c550	140
6d0f6bcf JCPV	141	#define CONFIG_SYS_FLASH_BANKS_LIST {0xff800000, CONFIG_SYS_FLASH_BASE}
	142	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
	143	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
	144	#undef CONFIG_SYS_FLASH_CHECKSUM
	145	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	146	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
03f5c550	147
6d0f6bcf	148	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
03f5c550	149
00b1883a	150	#define CONFIG_FLASH_CFI_DRIVER
6d0f6bcf JCPV	151	#define CONFIG_SYS_FLASH_CFI
6d0f6bcf JCPV	152	#define CONFIG_SYS_FLASH_EMPTY_INFO
03f5c550	153
03f5c550 WD	154
03f5c550 WD	155	/*
7202d43d	156	* SDRAM on the Local Bus
03f5c550	157	*/
6d0f6bcf JCPV	158	#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
6d0f6bcf JCPV	159	#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
03f5c550 WD	160
	161	/*
	162	* Base Register 2 and Option Register 2 configure SDRAM.
6d0f6bcf	163	* The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
03f5c550 WD	164	*
	165	* For BR2, need:
	166	* Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
	167	* port-size = 32-bits = BR2[19:20] = 11
	168	* no parity checking = BR2[21:22] = 00
	169	* SDRAM for MSEL = BR2[24:26] = 011
	170	* Valid = BR[31] = 1
	171	*
	172	* 0 4 8 12 16 20 24 28
	173	* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
	174	*
6d0f6bcf	175	* FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
03f5c550 WD	176	* FIXME: the top 17 bits of BR2.
	177	*/
	178
6d0f6bcf	179	#define CONFIG_SYS_BR2_PRELIM 0xf0001861
03f5c550 WD	180
03f5c550 WD	181	/*
6d0f6bcf	182	* The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
03f5c550 WD	183	*
	184	* For OR2, need:
	185	* 64MB mask for AM, OR2[0:7] = 1111 1100
	186	* XAM, OR2[17:18] = 11
	187	* 9 columns OR2[19-21] = 010
	188	* 13 rows OR2[23-25] = 100
	189	* EAD set for extra time OR[31] = 1
	190	*
	191	* 0 4 8 12 16 20 24 28
	192	* 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
	193	*/
	194
6d0f6bcf	195	#define CONFIG_SYS_OR2_PRELIM 0xfc006901
03f5c550	196
6d0f6bcf JCPV	197	#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
	198	#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
	199	#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
	200	#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
03f5c550	201
03f5c550 WD	202	/*
	203	* Common settings for all Local Bus SDRAM commands.
	204	* At run time, either BSMA1516 (for CPU 1.1)
	205	* or BSMA1617 (for CPU 1.0) (old)
	206	* is OR'ed in too.
	207	*/
b0fe93ed KG	208	#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \
	209	\| LSDMR_PRETOACT7 \
	210	\| LSDMR_ACTTORW7 \
	211	\| LSDMR_BL8 \
	212	\| LSDMR_WRC4 \
	213	\| LSDMR_CL3 \
	214	\| LSDMR_RFEN \
03f5c550 WD	215	)
	216
	217	/*
	218	* The CADMUS registers are connected to CS3 on CDS.
	219	* The new memory map places CADMUS at 0xf8000000.
	220	*
	221	* For BR3, need:
	222	* Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
	223	* port-size = 8-bits = BR[19:20] = 01
	224	* no parity checking = BR[21:22] = 00
	225	* GPMC for MSEL = BR[24:26] = 000
	226	* Valid = BR[31] = 1
	227	*
	228	* 0 4 8 12 16 20 24 28
	229	* 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
	230	*
	231	* For OR3, need:
	232	* 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
	233	* disable buffer ctrl OR[19] = 0
	234	* CSNT OR[20] = 1
	235	* ACS OR[21:22] = 11
	236	* XACS OR[23] = 1
	237	* SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
	238	* SETA OR[28] = 0
	239	* TRLX OR[29] = 1
	240	* EHTR OR[30] = 1
	241	* EAD extra time OR[31] = 1
	242	*
	243	* 0 4 8 12 16 20 24 28
	244	* 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
	245	*/
	246
25eedb2c JL	247	#define CONFIG_FSL_CADMUS
25eedb2c JL	248
03f5c550	249	#define CADMUS_BASE_ADDR 0xf8000000
6d0f6bcf JCPV	250	#define CONFIG_SYS_BR3_PRELIM 0xf8000801
6d0f6bcf JCPV	251	#define CONFIG_SYS_OR3_PRELIM 0xfff00ff7
03f5c550	252
6d0f6bcf JCPV	253	#define CONFIG_SYS_INIT_RAM_LOCK 1
	254	#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
	255	#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */
03f5c550	256
6d0f6bcf JCPV	257	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
	258	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	259	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
03f5c550	260
6d0f6bcf JCPV	261	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
6d0f6bcf JCPV	262	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
03f5c550 WD	263
	264	/* Serial Port */
	265	#define CONFIG_CONS_INDEX 2
	266	#undef CONFIG_SERIAL_SOFTWARE_FIFO
6d0f6bcf JCPV	267	#define CONFIG_SYS_NS16550
	268	#define CONFIG_SYS_NS16550_SERIAL
	269	#define CONFIG_SYS_NS16550_REG_SIZE 1
	270	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
03f5c550	271
6d0f6bcf	272	#define CONFIG_SYS_BAUDRATE_TABLE \
03f5c550 WD	273	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
03f5c550 WD	274
6d0f6bcf JCPV	275	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
6d0f6bcf JCPV	276	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
03f5c550 WD	277
03f5c550 WD	278	/* Use the HUSH parser */
6d0f6bcf JCPV	279	#define CONFIG_SYS_HUSH_PARSER
	280	#ifdef CONFIG_SYS_HUSH_PARSER
	281	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
03f5c550 WD	282	#endif
03f5c550 WD	283
0e16387d	284	/* pass open firmware flat tree */
b90d2549 KG	285	#define CONFIG_OF_LIBFDT 1
	286	#define CONFIG_OF_BOARD_SETUP 1
	287	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
0e16387d	288
20476726 JL	289	/*
	290	* I2C
	291	*/
	292	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	293	#define CONFIG_HARD_I2C /* I2C with hardware support*/
03f5c550	294	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
6d0f6bcf JCPV	295	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
	296	#define CONFIG_SYS_I2C_SLAVE 0x7F
	297	#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
	298	#define CONFIG_SYS_I2C_OFFSET 0x3000
03f5c550	299
e8d18541 TT	300	/* EEPROM */
e8d18541 TT	301	#define CONFIG_ID_EEPROM
6d0f6bcf JCPV	302	#define CONFIG_SYS_I2C_EEPROM_CCID
	303	#define CONFIG_SYS_ID_EEPROM
	304	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
	305	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
e8d18541	306
03f5c550 WD	307	/*
03f5c550 WD	308	* General PCI
362dd830	309	* Memory space is mapped 1-1, but I/O space must start from 0.
03f5c550	310	*/
5af0fdd8	311	#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
10795f42	312	#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
5af0fdd8	313	#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
6d0f6bcf	314	#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
aca5f018	315	#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
5f91ef6a	316	#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
6d0f6bcf JCPV	317	#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
	318	#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
	319
5af0fdd8	320	#define CONFIG_SYS_PCI2_MEM_VIRT 0xa0000000
10795f42	321	#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
5af0fdd8	322	#define CONFIG_SYS_PCI2_MEM_PHYS 0xa0000000
6d0f6bcf	323	#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
aca5f018	324	#define CONFIG_SYS_PCI2_IO_VIRT 0xe2100000
5f91ef6a	325	#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
6d0f6bcf JCPV	326	#define CONFIG_SYS_PCI2_IO_PHYS 0xe2100000
6d0f6bcf JCPV	327	#define CONFIG_SYS_PCI2_IO_SIZE 0x100000 /* 1M */
03f5c550	328
7f3f2bd2 RV	329	#ifdef CONFIG_LEGACY
	330	#define BRIDGE_ID 17
	331	#define VIA_ID 2
	332	#else
	333	#define BRIDGE_ID 28
	334	#define VIA_ID 4
	335	#endif
03f5c550 WD	336
	337	#if defined(CONFIG_PCI)
	338
bf1dfffd	339	#define CONFIG_MPC85XX_PCI2
03f5c550	340	#define CONFIG_NET_MULTI
53677ef1	341	#define CONFIG_PCI_PNP /* do pci plug-and-play */
03f5c550 WD	342
	343	#undef CONFIG_EEPRO100
	344	#undef CONFIG_TULIP
	345
03f5c550	346	#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
6d0f6bcf	347	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
03f5c550 WD	348
	349	#endif /* CONFIG_PCI */
	350
	351
	352	#if defined(CONFIG_TSEC_ENET)
	353
	354	#ifndef CONFIG_NET_MULTI
53677ef1	355	#define CONFIG_NET_MULTI 1
03f5c550 WD	356	#endif
	357
	358	#define CONFIG_MII 1 /* MII PHY management */
255a3577 KP	359	#define CONFIG_TSEC1 1
	360	#define CONFIG_TSEC1_NAME "TSEC0"
	361	#define CONFIG_TSEC2 1
	362	#define CONFIG_TSEC2_NAME "TSEC1"
03f5c550 WD	363	#define TSEC1_PHY_ADDR 0
03f5c550 WD	364	#define TSEC2_PHY_ADDR 1
03f5c550 WD	365	#define TSEC1_PHYIDX 0
03f5c550 WD	366	#define TSEC2_PHYIDX 0
3a79013e AF	367	#define TSEC1_FLAGS TSEC_GIGABIT
3a79013e AF	368	#define TSEC2_FLAGS TSEC_GIGABIT
d9b94f28 JL	369
	370	/* Options are: TSEC[0-1] */
	371	#define CONFIG_ETHPRIME "TSEC0"
03f5c550 WD	372
	373	#endif /* CONFIG_TSEC_ENET */
	374
03f5c550 WD	375	/*
	376	* Environment
	377	*/
5a1aceb0	378	#define CONFIG_ENV_IS_IN_FLASH 1
6d0f6bcf	379	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
0e8d1586 JCPV	380	#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
0e8d1586 JCPV	381	#define CONFIG_ENV_SIZE 0x2000
03f5c550 WD	382
03f5c550 WD	383	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	384	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
03f5c550	385
659e2f67 JL	386	/*
	387	* BOOTP options
	388	*/
	389	#define CONFIG_BOOTP_BOOTFILESIZE
	390	#define CONFIG_BOOTP_BOOTPATH
	391	#define CONFIG_BOOTP_GATEWAY
	392	#define CONFIG_BOOTP_HOSTNAME
	393
	394
2835e518 JL	395	/*
	396	* Command line configuration.
	397	*/
	398	#include <config_cmd_default.h>
	399
	400	#define CONFIG_CMD_PING
	401	#define CONFIG_CMD_I2C
	402	#define CONFIG_CMD_MII
82ac8c97	403	#define CONFIG_CMD_ELF
1c9aa76b KG	404	#define CONFIG_CMD_IRQ
1c9aa76b KG	405	#define CONFIG_CMD_SETEXPR
199e262e	406	#define CONFIG_CMD_REGINFO
2835e518	407
03f5c550	408	#if defined(CONFIG_PCI)
2835e518	409	#define CONFIG_CMD_PCI
03f5c550	410	#endif
2835e518	411
03f5c550 WD	412
	413	#undef CONFIG_WATCHDOG /* watchdog disabled */
	414
	415	/*
	416	* Miscellaneous configurable options
	417	*/
6d0f6bcf	418	#define CONFIG_SYS_LONGHELP /* undef to save memory */
22abb2d2	419	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
6d0f6bcf JCPV	420	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
6d0f6bcf JCPV	421	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
2835e518	422	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	423	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
03f5c550	424	#else
6d0f6bcf	425	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
03f5c550	426	#endif
6d0f6bcf JCPV	427	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	428	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	429	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	430	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
03f5c550 WD	431
	432	/*
	433	* For booting Linux, the board info and command line data
89188a62	434	* have to be in the first 16 MB of memory, since this is
03f5c550 WD	435	* the maximum mapped by the Linux kernel during initialization.
03f5c550 WD	436	*/
89188a62	437	#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
03f5c550	438
03f5c550 WD	439	/*
	440	* Internal Definitions
	441	*
	442	* Boot Flags
	443	*/
	444	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	445	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	446
2835e518	447	#if defined(CONFIG_CMD_KGDB)
03f5c550 WD	448	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	449	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	450	#endif
	451
03f5c550 WD	452	/*
	453	* Environment Configuration
	454	*/
	455
	456	/* The mac addresses for all ethernet interface */
	457	#if defined(CONFIG_TSEC_ENET)
10327dc5	458	#define CONFIG_HAS_ETH0
03f5c550	459	#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
e2ffd59b	460	#define CONFIG_HAS_ETH1
03f5c550	461	#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
e2ffd59b	462	#define CONFIG_HAS_ETH2
03f5c550 WD	463	#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
	464	#endif
	465
	466	#define CONFIG_IPADDR 192.168.1.253
	467
	468	#define CONFIG_HOSTNAME unknown
	469	#define CONFIG_ROOTPATH /nfsroot
	470	#define CONFIG_BOOTFILE your.uImage
	471
	472	#define CONFIG_SERVERIP 192.168.1.1
	473	#define CONFIG_GATEWAYIP 192.168.1.1
	474	#define CONFIG_NETMASK 255.255.255.0
	475
	476	#define CONFIG_LOADADDR 200000 /default location for tftp and bootm/
	477
	478	#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
	479	#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
	480
	481	#define CONFIG_BAUDRATE 115200
	482
	483	#define CONFIG_EXTRA_ENV_SETTINGS \
	484	"netdev=eth0\0" \
	485	"consoledev=ttyS1\0" \
8272dc2f AF	486	"ramdiskaddr=600000\0" \
	487	"ramdiskfile=your.ramdisk.u-boot\0" \
	488	"fdtaddr=400000\0" \
	489	"fdtfile=your.fdt.dtb\0"
03f5c550 WD	490
	491	#define CONFIG_NFSBOOTCOMMAND \
	492	"setenv bootargs root=/dev/nfs rw " \
	493	"nfsroot=$serverip:$rootpath " \
	494	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	495	"console=$consoledev,$baudrate $othbootargs;" \
	496	"tftp $loadaddr $bootfile;" \
8272dc2f AF	497	"tftp $fdtaddr $fdtfile;" \
8272dc2f AF	498	"bootm $loadaddr - $fdtaddr"
03f5c550 WD	499
	500	#define CONFIG_RAMBOOTCOMMAND \
	501	"setenv bootargs root=/dev/ram rw " \
	502	"console=$consoledev,$baudrate $othbootargs;" \
	503	"tftp $ramdiskaddr $ramdiskfile;" \
	504	"tftp $loadaddr $bootfile;" \
	505	"bootm $loadaddr $ramdiskaddr"
	506
	507	#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
	508
03f5c550	509	#endif /* __CONFIG_H */