]>
Commit | Line | Data |
---|---|---|
42d1f039 | 1 | /* |
0ac6f8b7 | 2 | * Copyright 2004 Freescale Semiconductor. |
42d1f039 WD |
3 | * (C) Copyright 2002,2003 Motorola,Inc. |
4 | * Xianghua Xiao <X.Xiao@motorola.com> | |
5 | * | |
6 | * See file CREDITS for list of people who contributed to this | |
7 | * project. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License as | |
11 | * published by the Free Software Foundation; either version 2 of | |
12 | * the License, or (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
22 | * MA 02111-1307 USA | |
23 | */ | |
24 | ||
0ac6f8b7 WD |
25 | /* |
26 | * mpc8560ads board configuration file | |
27 | * | |
28 | * Please refer to doc/README.mpc85xx for more info. | |
29 | * | |
30 | * Make sure you change the MAC address and other network params first, | |
31 | * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. | |
42d1f039 WD |
32 | */ |
33 | ||
34 | #ifndef __CONFIG_H | |
35 | #define __CONFIG_H | |
36 | ||
37 | /* High Level Configuration Options */ | |
0ac6f8b7 WD |
38 | #define CONFIG_BOOKE 1 /* BOOKE */ |
39 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
40 | #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ | |
9c4c5ae3 | 41 | #define CONFIG_CPM2 1 /* has CPM2 */ |
0ac6f8b7 | 42 | #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ |
f060054d | 43 | #define CONFIG_MPC8560 1 |
0ac6f8b7 WD |
44 | |
45 | #define CONFIG_PCI | |
0151cbac | 46 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ |
53677ef1 | 47 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ |
ccc091aa | 48 | #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ |
42d1f039 | 49 | #define CONFIG_ENV_OVERWRITE |
7232a272 | 50 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ |
42d1f039 | 51 | |
0ac6f8b7 WD |
52 | /* |
53 | * sysclk for MPC85xx | |
54 | * | |
55 | * Two valid values are: | |
56 | * 33000000 | |
57 | * 66000000 | |
58 | * | |
59 | * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz | |
9aea9530 WD |
60 | * is likely the desired value here, so that is now the default. |
61 | * The board, however, can run at 66MHz. In any event, this value | |
62 | * must match the settings of some switches. Details can be found | |
63 | * in the README.mpc85xxads. | |
0ac6f8b7 WD |
64 | */ |
65 | ||
9aea9530 WD |
66 | #ifndef CONFIG_SYS_CLK_FREQ |
67 | #define CONFIG_SYS_CLK_FREQ 33000000 | |
42d1f039 WD |
68 | #endif |
69 | ||
9aea9530 | 70 | |
0ac6f8b7 WD |
71 | /* |
72 | * These can be toggled for performance analysis, otherwise use default. | |
73 | */ | |
74 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
75 | #define CONFIG_BTB /* toggle branch predition */ | |
42d1f039 | 76 | |
6d0f6bcf | 77 | #define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ |
0ac6f8b7 | 78 | |
6d0f6bcf JCPV |
79 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ |
80 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
42d1f039 | 81 | |
42d1f039 WD |
82 | |
83 | /* | |
84 | * Base addresses -- Note these are effective addresses where the | |
85 | * actual resources get mapped (not physical addresses) | |
86 | */ | |
6d0f6bcf JCPV |
87 | #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ |
88 | #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ | |
89 | #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ | |
90 | #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ | |
42d1f039 | 91 | |
8b625114 JL |
92 | /* DDR Setup */ |
93 | #define CONFIG_FSL_DDR1 | |
94 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ | |
95 | #define CONFIG_DDR_SPD | |
96 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
97 | ||
98 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
9aea9530 | 99 | |
6d0f6bcf JCPV |
100 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ |
101 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
9aea9530 | 102 | |
8b625114 JL |
103 | #define CONFIG_NUM_DDR_CONTROLLERS 1 |
104 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
105 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
9aea9530 | 106 | |
8b625114 JL |
107 | /* I2C addresses of SPD EEPROMs */ |
108 | #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ | |
9aea9530 | 109 | |
8b625114 | 110 | /* These are used when DDR doesn't use SPD. */ |
6d0f6bcf JCPV |
111 | #define CONFIG_SYS_SDRAM_SIZE 128 /* DDR is 128MB */ |
112 | #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 /* 0-128MB */ | |
113 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80000002 | |
114 | #define CONFIG_SYS_DDR_TIMING_1 0x37344321 | |
115 | #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ | |
116 | #define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ | |
117 | #define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ | |
118 | #define CONFIG_SYS_DDR_INTERVAL 0x05200100 /* autocharge,no open page */ | |
42d1f039 | 119 | |
0ac6f8b7 WD |
120 | /* |
121 | * SDRAM on the Local Bus | |
122 | */ | |
6d0f6bcf JCPV |
123 | #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ |
124 | #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ | |
42d1f039 | 125 | |
6d0f6bcf JCPV |
126 | #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ |
127 | #define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */ | |
42d1f039 | 128 | |
6d0f6bcf JCPV |
129 | #define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ |
130 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
131 | #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ | |
132 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
133 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
134 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
0ac6f8b7 | 135 | |
6d0f6bcf | 136 | #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ |
42d1f039 | 137 | |
6d0f6bcf JCPV |
138 | #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) |
139 | #define CONFIG_SYS_RAMBOOT | |
42d1f039 | 140 | #else |
6d0f6bcf | 141 | #undef CONFIG_SYS_RAMBOOT |
42d1f039 WD |
142 | #endif |
143 | ||
00b1883a | 144 | #define CONFIG_FLASH_CFI_DRIVER |
6d0f6bcf JCPV |
145 | #define CONFIG_SYS_FLASH_CFI |
146 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
0ac6f8b7 WD |
147 | |
148 | #undef CONFIG_CLOCKS_IN_MHZ | |
42d1f039 | 149 | |
42d1f039 | 150 | |
0ac6f8b7 WD |
151 | /* |
152 | * Local Bus Definitions | |
153 | */ | |
154 | ||
155 | /* | |
156 | * Base Register 2 and Option Register 2 configure SDRAM. | |
6d0f6bcf | 157 | * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. |
0ac6f8b7 WD |
158 | * |
159 | * For BR2, need: | |
160 | * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 | |
161 | * port-size = 32-bits = BR2[19:20] = 11 | |
162 | * no parity checking = BR2[21:22] = 00 | |
163 | * SDRAM for MSEL = BR2[24:26] = 011 | |
164 | * Valid = BR[31] = 1 | |
165 | * | |
166 | * 0 4 8 12 16 20 24 28 | |
167 | * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 | |
168 | * | |
6d0f6bcf | 169 | * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into |
0ac6f8b7 WD |
170 | * FIXME: the top 17 bits of BR2. |
171 | */ | |
172 | ||
6d0f6bcf | 173 | #define CONFIG_SYS_BR2_PRELIM 0xf0001861 |
0ac6f8b7 WD |
174 | |
175 | /* | |
6d0f6bcf | 176 | * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. |
0ac6f8b7 WD |
177 | * |
178 | * For OR2, need: | |
179 | * 64MB mask for AM, OR2[0:7] = 1111 1100 | |
180 | * XAM, OR2[17:18] = 11 | |
181 | * 9 columns OR2[19-21] = 010 | |
182 | * 13 rows OR2[23-25] = 100 | |
183 | * EAD set for extra time OR[31] = 1 | |
184 | * | |
185 | * 0 4 8 12 16 20 24 28 | |
186 | * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 | |
187 | */ | |
188 | ||
6d0f6bcf | 189 | #define CONFIG_SYS_OR2_PRELIM 0xfc006901 |
0ac6f8b7 | 190 | |
6d0f6bcf JCPV |
191 | #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ |
192 | #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ | |
193 | #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ | |
194 | #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ | |
0ac6f8b7 WD |
195 | |
196 | /* | |
197 | * LSDMR masks | |
198 | */ | |
6d0f6bcf JCPV |
199 | #define CONFIG_SYS_LBC_LSDMR_RFEN (1 << (31 - 1)) |
200 | #define CONFIG_SYS_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) | |
201 | #define CONFIG_SYS_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) | |
202 | #define CONFIG_SYS_LBC_LSDMR_RFCR5 (3 << (31 - 16)) | |
203 | #define CONFIG_SYS_LBC_LSDMR_RFCR16 (7 << (31 - 16)) | |
204 | #define CONFIG_SYS_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) | |
205 | #define CONFIG_SYS_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) | |
206 | #define CONFIG_SYS_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) | |
207 | #define CONFIG_SYS_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) | |
208 | #define CONFIG_SYS_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) | |
209 | #define CONFIG_SYS_LBC_LSDMR_BL8 (1 << (31 - 23)) | |
210 | #define CONFIG_SYS_LBC_LSDMR_WRC2 (2 << (31 - 27)) | |
211 | #define CONFIG_SYS_LBC_LSDMR_WRC4 (0 << (31 - 27)) | |
212 | #define CONFIG_SYS_LBC_LSDMR_BUFCMD (1 << (31 - 29)) | |
213 | #define CONFIG_SYS_LBC_LSDMR_CL3 (3 << (31 - 31)) | |
214 | ||
215 | #define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) | |
216 | #define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) | |
217 | #define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) | |
218 | #define CONFIG_SYS_LBC_LSDMR_OP_MRW (3 << (31 - 4)) | |
219 | #define CONFIG_SYS_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) | |
220 | #define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) | |
221 | #define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) | |
222 | #define CONFIG_SYS_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) | |
223 | ||
224 | #define CONFIG_SYS_LBC_LSDMR_COMMON ( CONFIG_SYS_LBC_LSDMR_BSMA1516 \ | |
225 | | CONFIG_SYS_LBC_LSDMR_RFCR5 \ | |
226 | | CONFIG_SYS_LBC_LSDMR_PRETOACT3 \ | |
227 | | CONFIG_SYS_LBC_LSDMR_ACTTORW3 \ | |
228 | | CONFIG_SYS_LBC_LSDMR_BL8 \ | |
229 | | CONFIG_SYS_LBC_LSDMR_WRC2 \ | |
230 | | CONFIG_SYS_LBC_LSDMR_CL3 \ | |
231 | | CONFIG_SYS_LBC_LSDMR_RFEN \ | |
0ac6f8b7 WD |
232 | ) |
233 | ||
234 | /* | |
235 | * SDRAM Controller configuration sequence. | |
236 | */ | |
6d0f6bcf JCPV |
237 | #define CONFIG_SYS_LBC_LSDMR_1 ( CONFIG_SYS_LBC_LSDMR_COMMON \ |
238 | | CONFIG_SYS_LBC_LSDMR_OP_PCHALL) | |
239 | #define CONFIG_SYS_LBC_LSDMR_2 ( CONFIG_SYS_LBC_LSDMR_COMMON \ | |
240 | | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH) | |
241 | #define CONFIG_SYS_LBC_LSDMR_3 ( CONFIG_SYS_LBC_LSDMR_COMMON \ | |
242 | | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH) | |
243 | #define CONFIG_SYS_LBC_LSDMR_4 ( CONFIG_SYS_LBC_LSDMR_COMMON \ | |
244 | | CONFIG_SYS_LBC_LSDMR_OP_MRW) | |
245 | #define CONFIG_SYS_LBC_LSDMR_5 ( CONFIG_SYS_LBC_LSDMR_COMMON \ | |
246 | | CONFIG_SYS_LBC_LSDMR_OP_NORMAL) | |
0ac6f8b7 | 247 | |
42d1f039 | 248 | |
9aea9530 WD |
249 | /* |
250 | * 32KB, 8-bit wide for ADS config reg | |
251 | */ | |
6d0f6bcf JCPV |
252 | #define CONFIG_SYS_BR4_PRELIM 0xf8000801 |
253 | #define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 | |
254 | #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) | |
42d1f039 | 255 | |
6d0f6bcf JCPV |
256 | #define CONFIG_SYS_INIT_RAM_LOCK 1 |
257 | #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ | |
258 | #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ | |
42d1f039 | 259 | |
6d0f6bcf JCPV |
260 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ |
261 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
262 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
42d1f039 | 263 | |
6d0f6bcf JCPV |
264 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ |
265 | #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ | |
42d1f039 WD |
266 | |
267 | /* Serial Port */ | |
0ac6f8b7 WD |
268 | #define CONFIG_CONS_ON_SCC /* define if console on SCC */ |
269 | #undef CONFIG_CONS_NONE /* define if console on something else */ | |
270 | #define CONFIG_CONS_INDEX 1 /* which serial channel for console */ | |
42d1f039 | 271 | |
53677ef1 | 272 | #define CONFIG_BAUDRATE 115200 |
42d1f039 | 273 | |
6d0f6bcf | 274 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
42d1f039 WD |
275 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} |
276 | ||
277 | /* Use the HUSH parser */ | |
6d0f6bcf JCPV |
278 | #define CONFIG_SYS_HUSH_PARSER |
279 | #ifdef CONFIG_SYS_HUSH_PARSER | |
280 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
42d1f039 WD |
281 | #endif |
282 | ||
0e16387d | 283 | /* pass open firmware flat tree */ |
5ce71580 KG |
284 | #define CONFIG_OF_LIBFDT 1 |
285 | #define CONFIG_OF_BOARD_SETUP 1 | |
286 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
0e16387d | 287 | |
6d0f6bcf JCPV |
288 | #define CONFIG_SYS_64BIT_VSPRINTF 1 |
289 | #define CONFIG_SYS_64BIT_STRTOUL 1 | |
8b625114 | 290 | |
20476726 JL |
291 | /* |
292 | * I2C | |
293 | */ | |
294 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
295 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
42d1f039 | 296 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ |
6d0f6bcf JCPV |
297 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
298 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
299 | #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ | |
300 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
42d1f039 | 301 | |
0ac6f8b7 | 302 | /* RapidIO MMU */ |
10795f42 KG |
303 | #define CONFIG_SYS_RIO_MEM_BUS 0xc0000000 /* base address */ |
304 | #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BUS | |
6d0f6bcf | 305 | #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ |
0ac6f8b7 WD |
306 | |
307 | /* | |
308 | * General PCI | |
362dd830 | 309 | * Memory space is mapped 1-1, but I/O space must start from 0. |
0ac6f8b7 | 310 | */ |
10795f42 KG |
311 | #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 |
312 | #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS | |
6d0f6bcf JCPV |
313 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ |
314 | #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 | |
315 | #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 | |
316 | #define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */ | |
0ac6f8b7 WD |
317 | |
318 | #if defined(CONFIG_PCI) | |
42d1f039 | 319 | |
42d1f039 | 320 | #define CONFIG_NET_MULTI |
53677ef1 | 321 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
0ac6f8b7 WD |
322 | |
323 | #undef CONFIG_EEPRO100 | |
42d1f039 | 324 | #undef CONFIG_TULIP |
0ac6f8b7 WD |
325 | |
326 | #if !defined(CONFIG_PCI_PNP) | |
327 | #define PCI_ENET0_IOADDR 0xe0000000 | |
328 | #define PCI_ENET0_MEMADDR 0xe0000000 | |
53677ef1 | 329 | #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ |
42d1f039 | 330 | #endif |
0ac6f8b7 WD |
331 | |
332 | #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
6d0f6bcf | 333 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ |
0ac6f8b7 WD |
334 | |
335 | #endif /* CONFIG_PCI */ | |
336 | ||
337 | ||
ccc091aa | 338 | #ifdef CONFIG_TSEC_ENET |
0ac6f8b7 WD |
339 | |
340 | #ifndef CONFIG_NET_MULTI | |
53677ef1 | 341 | #define CONFIG_NET_MULTI 1 |
0ac6f8b7 WD |
342 | #endif |
343 | ||
ccc091aa | 344 | #ifndef CONFIG_MII |
0ac6f8b7 | 345 | #define CONFIG_MII 1 /* MII PHY management */ |
ccc091aa | 346 | #endif |
255a3577 KP |
347 | #define CONFIG_TSEC1 1 |
348 | #define CONFIG_TSEC1_NAME "TSEC0" | |
349 | #define CONFIG_TSEC2 1 | |
350 | #define CONFIG_TSEC2_NAME "TSEC1" | |
0ac6f8b7 WD |
351 | #define TSEC1_PHY_ADDR 0 |
352 | #define TSEC2_PHY_ADDR 1 | |
353 | #define TSEC1_PHYIDX 0 | |
354 | #define TSEC2_PHYIDX 0 | |
3a79013e AF |
355 | #define TSEC1_FLAGS TSEC_GIGABIT |
356 | #define TSEC2_FLAGS TSEC_GIGABIT | |
d9b94f28 JL |
357 | |
358 | /* Options are: TSEC[0-1] */ | |
359 | #define CONFIG_ETHPRIME "TSEC0" | |
0ac6f8b7 | 360 | |
ccc091aa AF |
361 | #endif /* CONFIG_TSEC_ENET */ |
362 | ||
53677ef1 | 363 | #ifdef CONFIG_ETHER_ON_FCC /* CPM FCC Ethernet */ |
0ac6f8b7 | 364 | |
53677ef1 | 365 | #undef CONFIG_ETHER_NONE /* define if ether on something else */ |
0ac6f8b7 WD |
366 | #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ |
367 | ||
368 | #if (CONFIG_ETHER_INDEX == 2) | |
42d1f039 WD |
369 | /* |
370 | * - Rx-CLK is CLK13 | |
371 | * - Tx-CLK is CLK14 | |
372 | * - Select bus for bd/buffers | |
373 | * - Full duplex | |
374 | */ | |
6d0f6bcf JCPV |
375 | #define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) |
376 | #define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) | |
377 | #define CONFIG_SYS_CPMFCR_RAMTYPE 0 | |
378 | #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE) | |
42d1f039 | 379 | #define FETH2_RST 0x01 |
0ac6f8b7 | 380 | #elif (CONFIG_ETHER_INDEX == 3) |
42d1f039 WD |
381 | /* need more definitions here for FE3 */ |
382 | #define FETH3_RST 0x80 | |
53677ef1 | 383 | #endif /* CONFIG_ETHER_INDEX */ |
0ac6f8b7 | 384 | |
ccc091aa AF |
385 | #ifndef CONFIG_MII |
386 | #define CONFIG_MII 1 /* MII PHY management */ | |
387 | #endif | |
388 | ||
0ac6f8b7 WD |
389 | #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ |
390 | ||
42d1f039 WD |
391 | /* |
392 | * GPIO pins used for bit-banged MII communications | |
393 | */ | |
394 | #define MDIO_PORT 2 /* Port C */ | |
395 | #define MDIO_ACTIVE (iop->pdir |= 0x00400000) | |
396 | #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) | |
397 | #define MDIO_READ ((iop->pdat & 0x00400000) != 0) | |
398 | ||
399 | #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ | |
400 | else iop->pdat &= ~0x00400000 | |
401 | ||
402 | #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ | |
403 | else iop->pdat &= ~0x00200000 | |
404 | ||
405 | #define MIIDELAY udelay(1) | |
0ac6f8b7 | 406 | |
42d1f039 WD |
407 | #endif |
408 | ||
0ac6f8b7 WD |
409 | |
410 | /* | |
411 | * Environment | |
412 | */ | |
6d0f6bcf | 413 | #ifndef CONFIG_SYS_RAMBOOT |
5a1aceb0 | 414 | #define CONFIG_ENV_IS_IN_FLASH 1 |
6d0f6bcf | 415 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) |
0e8d1586 JCPV |
416 | #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ |
417 | #define CONFIG_ENV_SIZE 0x2000 | |
42d1f039 | 418 | #else |
6d0f6bcf | 419 | #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ |
93f6d725 | 420 | #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ |
6d0f6bcf | 421 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) |
0e8d1586 | 422 | #define CONFIG_ENV_SIZE 0x2000 |
42d1f039 WD |
423 | #endif |
424 | ||
0ac6f8b7 | 425 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ |
6d0f6bcf | 426 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
42d1f039 | 427 | |
659e2f67 JL |
428 | /* |
429 | * BOOTP options | |
430 | */ | |
431 | #define CONFIG_BOOTP_BOOTFILESIZE | |
432 | #define CONFIG_BOOTP_BOOTPATH | |
433 | #define CONFIG_BOOTP_GATEWAY | |
434 | #define CONFIG_BOOTP_HOSTNAME | |
435 | ||
436 | ||
2835e518 JL |
437 | /* |
438 | * Command line configuration. | |
439 | */ | |
440 | #include <config_cmd_default.h> | |
441 | ||
442 | #define CONFIG_CMD_PING | |
443 | #define CONFIG_CMD_I2C | |
82ac8c97 | 444 | #define CONFIG_CMD_ELF |
1c9aa76b KG |
445 | #define CONFIG_CMD_IRQ |
446 | #define CONFIG_CMD_SETEXPR | |
2835e518 JL |
447 | |
448 | #if defined(CONFIG_PCI) | |
449 | #define CONFIG_CMD_PCI | |
450 | #endif | |
451 | ||
452 | #if defined(CONFIG_ETHER_ON_FCC) | |
453 | #define CONFIG_CMD_MII | |
454 | #endif | |
455 | ||
6d0f6bcf | 456 | #if defined(CONFIG_SYS_RAMBOOT) |
2835e518 JL |
457 | #undef CONFIG_CMD_ENV |
458 | #undef CONFIG_CMD_LOADS | |
42d1f039 | 459 | #endif |
0ac6f8b7 | 460 | |
42d1f039 | 461 | |
0ac6f8b7 | 462 | #undef CONFIG_WATCHDOG /* watchdog disabled */ |
42d1f039 WD |
463 | |
464 | /* | |
465 | * Miscellaneous configurable options | |
466 | */ | |
6d0f6bcf | 467 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
22abb2d2 | 468 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
6d0f6bcf JCPV |
469 | #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ |
470 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
0ac6f8b7 | 471 | |
2835e518 | 472 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 473 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
42d1f039 | 474 | #else |
6d0f6bcf | 475 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
42d1f039 | 476 | #endif |
0ac6f8b7 | 477 | |
6d0f6bcf JCPV |
478 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
479 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
480 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
481 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
42d1f039 WD |
482 | |
483 | /* | |
484 | * For booting Linux, the board info and command line data | |
485 | * have to be in the first 8 MB of memory, since this is | |
486 | * the maximum mapped by the Linux kernel during initialization. | |
487 | */ | |
6d0f6bcf | 488 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ |
42d1f039 | 489 | |
42d1f039 WD |
490 | /* |
491 | * Internal Definitions | |
492 | * | |
493 | * Boot Flags | |
494 | */ | |
495 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
0ac6f8b7 | 496 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ |
42d1f039 | 497 | |
2835e518 | 498 | #if defined(CONFIG_CMD_KGDB) |
42d1f039 WD |
499 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
500 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
501 | #endif | |
502 | ||
9aea9530 WD |
503 | |
504 | /* | |
505 | * Environment Configuration | |
506 | */ | |
507 | ||
0ac6f8b7 | 508 | /* The mac addresses for all ethernet interface */ |
42d1f039 | 509 | #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) |
10327dc5 | 510 | #define CONFIG_HAS_ETH0 |
0ac6f8b7 | 511 | #define CONFIG_ETHADDR 00:E0:0C:00:00:FD |
e2ffd59b | 512 | #define CONFIG_HAS_ETH1 |
0ac6f8b7 | 513 | #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD |
e2ffd59b | 514 | #define CONFIG_HAS_ETH2 |
0ac6f8b7 | 515 | #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD |
5ce71580 KG |
516 | #define CONFIG_HAS_ETH3 |
517 | #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD | |
42d1f039 WD |
518 | #endif |
519 | ||
0ac6f8b7 WD |
520 | #define CONFIG_IPADDR 192.168.1.253 |
521 | ||
522 | #define CONFIG_HOSTNAME unknown | |
523 | #define CONFIG_ROOTPATH /nfsroot | |
524 | #define CONFIG_BOOTFILE your.uImage | |
525 | ||
526 | #define CONFIG_SERVERIP 192.168.1.1 | |
527 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
528 | #define CONFIG_NETMASK 255.255.255.0 | |
529 | ||
530 | #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ | |
531 | ||
9aea9530 | 532 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ |
0ac6f8b7 WD |
533 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ |
534 | ||
535 | #define CONFIG_BAUDRATE 115200 | |
536 | ||
9aea9530 | 537 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
6b44a44e AF |
538 | "netdev=eth0\0" \ |
539 | "consoledev=ttyCPM\0" \ | |
540 | "ramdiskaddr=1000000\0" \ | |
541 | "ramdiskfile=your.ramdisk.u-boot\0" \ | |
542 | "fdtaddr=400000\0" \ | |
543 | "fdtfile=mpc8560ads.dtb\0" | |
0ac6f8b7 | 544 | |
9aea9530 | 545 | #define CONFIG_NFSBOOTCOMMAND \ |
6b44a44e AF |
546 | "setenv bootargs root=/dev/nfs rw " \ |
547 | "nfsroot=$serverip:$rootpath " \ | |
548 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
549 | "console=$consoledev,$baudrate $othbootargs;" \ | |
550 | "tftp $loadaddr $bootfile;" \ | |
551 | "tftp $fdtaddr $fdtfile;" \ | |
552 | "bootm $loadaddr - $fdtaddr" | |
0ac6f8b7 WD |
553 | |
554 | #define CONFIG_RAMBOOTCOMMAND \ | |
6b44a44e AF |
555 | "setenv bootargs root=/dev/ram rw " \ |
556 | "console=$consoledev,$baudrate $othbootargs;" \ | |
557 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
558 | "tftp $loadaddr $bootfile;" \ | |
559 | "tftp $fdtaddr $fdtfile;" \ | |
560 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
0ac6f8b7 WD |
561 | |
562 | #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND | |
42d1f039 WD |
563 | |
564 | #endif /* __CONFIG_H */ |