]>
Commit | Line | Data |
---|---|---|
67431059 AF |
1 | /* |
2 | * Copyright 2004-2007 Freescale Semiconductor. | |
3 | * | |
4 | * See file CREDITS for list of people who contributed to this | |
5 | * project. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or | |
8 | * modify it under the terms of the GNU General Public License as | |
9 | * published by the Free Software Foundation; either version 2 of | |
10 | * the License, or (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
20 | * MA 02111-1307 USA | |
21 | */ | |
22 | ||
23 | /* | |
24 | * mpc8568mds board configuration file | |
25 | */ | |
26 | #ifndef __CONFIG_H | |
27 | #define __CONFIG_H | |
28 | ||
29 | /* High Level Configuration Options */ | |
30 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
da9d4610 | 31 | #define CONFIG_E500 1 /* BOOKE e500 family */ |
67431059 AF |
32 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ |
33 | #define CONFIG_MPC8568 1 /* MPC8568 specific */ | |
34 | #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ | |
35 | ||
1563f56e HW |
36 | #define CONFIG_PCI 1 /* Enable PCI/PCIE */ |
37 | #define CONFIG_PCI1 1 /* PCI controller */ | |
38 | #define CONFIG_PCIE1 1 /* PCIE controller */ | |
39 | #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ | |
8ff3de61 | 40 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ |
0151cbac | 41 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ |
53677ef1 | 42 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ |
b96c83d4 | 43 | #define CONFIG_QE /* Enable QE */ |
67431059 | 44 | #define CONFIG_ENV_OVERWRITE |
4d3521cc | 45 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ |
67431059 AF |
46 | |
47 | /* | |
48 | * When initializing flash, if we cannot find the manufacturer ID, | |
49 | * assume this is the AMD flash associated with the MDS board. | |
50 | * This allows booting from a promjet. | |
51 | */ | |
52 | #define CONFIG_ASSUME_AMD_FLASH | |
53 | ||
67431059 AF |
54 | #ifndef __ASSEMBLY__ |
55 | extern unsigned long get_clock_freq(void); | |
56 | #endif /*Replace a call to get_clock_freq (after it is implemented)*/ | |
57 | #define CONFIG_SYS_CLK_FREQ 66000000 /*TODO: restore if wanting to read from BCSR: get_clock_freq()*/ /* sysclk for MPC85xx */ | |
58 | ||
59 | /* | |
60 | * These can be toggled for performance analysis, otherwise use default. | |
61 | */ | |
53677ef1 | 62 | #define CONFIG_L2_CACHE /* toggle L2 cache */ |
7a1ac419 HW |
63 | #define CONFIG_BTB /* toggle branch predition */ |
64 | #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ | |
67431059 AF |
65 | |
66 | /* | |
67 | * Only possible on E500 Version 2 or newer cores. | |
68 | */ | |
69 | #define CONFIG_ENABLE_36BIT_PHYS 1 | |
70 | ||
71 | ||
72 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ | |
73 | ||
6d0f6bcf JCPV |
74 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
75 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
67431059 AF |
76 | |
77 | /* | |
78 | * Base addresses -- Note these are effective addresses where the | |
79 | * actual resources get mapped (not physical addresses) | |
80 | */ | |
6d0f6bcf JCPV |
81 | #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ |
82 | #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ | |
83 | #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ | |
84 | #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ | |
67431059 | 85 | |
6d0f6bcf JCPV |
86 | #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) |
87 | #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) | |
1563f56e | 88 | |
e6f5b35b JL |
89 | /* DDR Setup */ |
90 | #define CONFIG_FSL_DDR2 | |
91 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
92 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ | |
93 | #define CONFIG_DDR_SPD | |
94 | #define CONFIG_DDR_DLL /* possible DLL fix needed */ | |
95 | #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ | |
96 | ||
97 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
98 | ||
6d0f6bcf JCPV |
99 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ |
100 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
67431059 | 101 | |
e6f5b35b JL |
102 | #define CONFIG_NUM_DDR_CONTROLLERS 1 |
103 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
104 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
67431059 | 105 | |
e6f5b35b JL |
106 | /* I2C addresses of SPD EEPROMs */ |
107 | #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ | |
108 | ||
109 | /* Make sure required options are set */ | |
67431059 AF |
110 | #ifndef CONFIG_SPD_EEPROM |
111 | #error ("CONFIG_SPD_EEPROM is required") | |
112 | #endif | |
113 | ||
114 | #undef CONFIG_CLOCKS_IN_MHZ | |
115 | ||
67431059 AF |
116 | /* |
117 | * Local Bus Definitions | |
118 | */ | |
119 | ||
120 | /* | |
121 | * FLASH on the Local Bus | |
122 | * Two banks, 8M each, using the CFI driver. | |
123 | * Boot from BR0/OR0 bank at 0xff00_0000 | |
124 | * Alternate BR1/OR1 bank at 0xff80_0000 | |
125 | * | |
126 | * BR0, BR1: | |
127 | * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0 | |
128 | * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0 | |
129 | * Port Size = 16 bits = BRx[19:20] = 10 | |
130 | * Use GPCM = BRx[24:26] = 000 | |
131 | * Valid = BRx[31] = 1 | |
132 | * | |
133 | * 0 4 8 12 16 20 24 28 | |
134 | * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 | |
135 | * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 | |
136 | * | |
137 | * OR0, OR1: | |
138 | * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 | |
139 | * Reserved ORx[17:18] = 11, confusion here? | |
140 | * CSNT = ORx[20] = 1 | |
141 | * ACS = half cycle delay = ORx[21:22] = 11 | |
142 | * SCY = 6 = ORx[24:27] = 0110 | |
143 | * TRLX = use relaxed timing = ORx[29] = 1 | |
144 | * EAD = use external address latch delay = OR[31] = 1 | |
145 | * | |
146 | * 0 4 8 12 16 20 24 28 | |
147 | * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx | |
148 | */ | |
6d0f6bcf | 149 | #define CONFIG_SYS_BCSR_BASE 0xf8000000 |
67431059 | 150 | |
6d0f6bcf | 151 | #define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ |
67431059 AF |
152 | |
153 | /*Chip select 0 - Flash*/ | |
6d0f6bcf JCPV |
154 | #define CONFIG_SYS_BR0_PRELIM 0xfe001001 |
155 | #define CONFIG_SYS_OR0_PRELIM 0xfe006ff7 | |
67431059 AF |
156 | |
157 | /*Chip slelect 1 - BCSR*/ | |
6d0f6bcf JCPV |
158 | #define CONFIG_SYS_BR1_PRELIM 0xf8000801 |
159 | #define CONFIG_SYS_OR1_PRELIM 0xffffe9f7 | |
67431059 | 160 | |
6d0f6bcf JCPV |
161 | /*#define CONFIG_SYS_FLASH_BANKS_LIST {0xff800000, CONFIG_SYS_FLASH_BASE} */ |
162 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
163 | #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ | |
164 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
165 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
166 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
67431059 | 167 | |
6d0f6bcf | 168 | #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ |
67431059 | 169 | |
00b1883a | 170 | #define CONFIG_FLASH_CFI_DRIVER |
6d0f6bcf JCPV |
171 | #define CONFIG_SYS_FLASH_CFI |
172 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
67431059 AF |
173 | |
174 | ||
175 | /* | |
176 | * SDRAM on the LocalBus | |
177 | */ | |
6d0f6bcf JCPV |
178 | #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ |
179 | #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ | |
67431059 AF |
180 | |
181 | ||
182 | /*Chip select 2 - SDRAM*/ | |
6d0f6bcf JCPV |
183 | #define CONFIG_SYS_BR2_PRELIM 0xf0001861 |
184 | #define CONFIG_SYS_OR2_PRELIM 0xfc006901 | |
67431059 | 185 | |
6d0f6bcf JCPV |
186 | #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ |
187 | #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ | |
188 | #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ | |
189 | #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ | |
67431059 AF |
190 | |
191 | /* | |
192 | * LSDMR masks | |
193 | */ | |
6d0f6bcf JCPV |
194 | #define CONFIG_SYS_LBC_LSDMR_RFEN (1 << (31 - 1)) |
195 | #define CONFIG_SYS_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) | |
196 | #define CONFIG_SYS_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) | |
197 | #define CONFIG_SYS_LBC_LSDMR_RFCR16 (7 << (31 - 16)) | |
198 | #define CONFIG_SYS_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) | |
199 | #define CONFIG_SYS_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) | |
200 | #define CONFIG_SYS_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) | |
201 | #define CONFIG_SYS_LBC_LSDMR_BL8 (1 << (31 - 23)) | |
202 | #define CONFIG_SYS_LBC_LSDMR_WRC4 (0 << (31 - 27)) | |
203 | #define CONFIG_SYS_LBC_LSDMR_CL3 (3 << (31 - 31)) | |
204 | ||
205 | #define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) | |
206 | #define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) | |
207 | #define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) | |
208 | #define CONFIG_SYS_LBC_LSDMR_OP_MRW (3 << (31 - 4)) | |
209 | #define CONFIG_SYS_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) | |
210 | #define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) | |
211 | #define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) | |
212 | #define CONFIG_SYS_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) | |
67431059 AF |
213 | |
214 | /* | |
215 | * Common settings for all Local Bus SDRAM commands. | |
216 | * At run time, either BSMA1516 (for CPU 1.1) | |
217 | * or BSMA1617 (for CPU 1.0) (old) | |
218 | * is OR'ed in too. | |
219 | */ | |
6d0f6bcf JCPV |
220 | #define CONFIG_SYS_LBC_LSDMR_COMMON ( CONFIG_SYS_LBC_LSDMR_RFCR16 \ |
221 | | CONFIG_SYS_LBC_LSDMR_PRETOACT7 \ | |
222 | | CONFIG_SYS_LBC_LSDMR_ACTTORW7 \ | |
223 | | CONFIG_SYS_LBC_LSDMR_BL8 \ | |
224 | | CONFIG_SYS_LBC_LSDMR_WRC4 \ | |
225 | | CONFIG_SYS_LBC_LSDMR_CL3 \ | |
226 | | CONFIG_SYS_LBC_LSDMR_RFEN \ | |
67431059 AF |
227 | ) |
228 | ||
229 | /* | |
230 | * The bcsr registers are connected to CS3 on MDS. | |
231 | * The new memory map places bcsr at 0xf8000000. | |
232 | * | |
233 | * For BR3, need: | |
234 | * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 | |
235 | * port-size = 8-bits = BR[19:20] = 01 | |
236 | * no parity checking = BR[21:22] = 00 | |
237 | * GPMC for MSEL = BR[24:26] = 000 | |
238 | * Valid = BR[31] = 1 | |
239 | * | |
240 | * 0 4 8 12 16 20 24 28 | |
241 | * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 | |
242 | * | |
243 | * For OR3, need: | |
244 | * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 | |
245 | * disable buffer ctrl OR[19] = 0 | |
246 | * CSNT OR[20] = 1 | |
247 | * ACS OR[21:22] = 11 | |
248 | * XACS OR[23] = 1 | |
249 | * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe | |
250 | * SETA OR[28] = 0 | |
251 | * TRLX OR[29] = 1 | |
252 | * EHTR OR[30] = 1 | |
253 | * EAD extra time OR[31] = 1 | |
254 | * | |
255 | * 0 4 8 12 16 20 24 28 | |
256 | * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 | |
257 | */ | |
6d0f6bcf | 258 | #define CONFIG_SYS_BCSR (0xf8000000) |
67431059 AF |
259 | |
260 | /*Chip slelect 4 - PIB*/ | |
6d0f6bcf JCPV |
261 | #define CONFIG_SYS_BR4_PRELIM 0xf8008801 |
262 | #define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 | |
67431059 AF |
263 | |
264 | /*Chip select 5 - PIB*/ | |
6d0f6bcf JCPV |
265 | #define CONFIG_SYS_BR5_PRELIM 0xf8010801 |
266 | #define CONFIG_SYS_OR5_PRELIM 0xffff69f7 | |
67431059 AF |
267 | |
268 | #define CONFIG_L1_INIT_RAM | |
6d0f6bcf JCPV |
269 | #define CONFIG_SYS_INIT_RAM_LOCK 1 |
270 | #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ | |
271 | #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ | |
67431059 | 272 | |
6d0f6bcf JCPV |
273 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ |
274 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
275 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
67431059 | 276 | |
6d0f6bcf JCPV |
277 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ |
278 | #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ | |
67431059 AF |
279 | |
280 | /* Serial Port */ | |
281 | #define CONFIG_CONS_INDEX 1 | |
282 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
6d0f6bcf JCPV |
283 | #define CONFIG_SYS_NS16550 |
284 | #define CONFIG_SYS_NS16550_SERIAL | |
285 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
286 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
67431059 | 287 | |
6d0f6bcf | 288 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
67431059 AF |
289 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} |
290 | ||
6d0f6bcf JCPV |
291 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) |
292 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
67431059 AF |
293 | |
294 | /* Use the HUSH parser*/ | |
6d0f6bcf JCPV |
295 | #define CONFIG_SYS_HUSH_PARSER |
296 | #ifdef CONFIG_SYS_HUSH_PARSER | |
297 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
67431059 AF |
298 | #endif |
299 | ||
300 | /* pass open firmware flat tree */ | |
c480861b KG |
301 | #define CONFIG_OF_LIBFDT 1 |
302 | #define CONFIG_OF_BOARD_SETUP 1 | |
303 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
67431059 | 304 | |
6d0f6bcf JCPV |
305 | #define CONFIG_SYS_64BIT_VSPRINTF 1 |
306 | #define CONFIG_SYS_64BIT_STRTOUL 1 | |
e6f5b35b | 307 | |
67431059 AF |
308 | /* |
309 | * I2C | |
310 | */ | |
311 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
312 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
313 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
c59e4091 HW |
314 | #define CONFIG_I2C_MULTI_BUS |
315 | #define CONFIG_I2C_CMD_TREE | |
6d0f6bcf JCPV |
316 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
317 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 | |
318 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
319 | #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ | |
320 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
321 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
67431059 AF |
322 | |
323 | /* | |
324 | * General PCI | |
325 | * Memory Addresses are mapped 1-1. I/O is mapped from 0 | |
326 | */ | |
6d0f6bcf JCPV |
327 | #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 |
328 | #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE | |
329 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ | |
330 | #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 | |
331 | #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 | |
332 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 8M */ | |
333 | ||
334 | #define CONFIG_SYS_PCIE1_MEM_BASE 0xa0000000 | |
335 | #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE | |
336 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
337 | #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 | |
338 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 | |
339 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ | |
340 | ||
341 | #define CONFIG_SYS_SRIO_MEM_BASE 0xc0000000 | |
67431059 | 342 | |
da9d4610 AF |
343 | #ifdef CONFIG_QE |
344 | /* | |
345 | * QE UEC ethernet configuration | |
346 | */ | |
347 | #define CONFIG_UEC_ETH | |
348 | #ifndef CONFIG_TSEC_ENET | |
b96c83d4 | 349 | #define CONFIG_ETHPRIME "FSL UEC0" |
da9d4610 AF |
350 | #endif |
351 | #define CONFIG_PHY_MODE_NEED_CHANGE | |
352 | #define CONFIG_eTSEC_MDIO_BUS | |
353 | ||
354 | #ifdef CONFIG_eTSEC_MDIO_BUS | |
53677ef1 | 355 | #define CONFIG_MIIM_ADDRESS 0xE0024520 |
da9d4610 AF |
356 | #endif |
357 | ||
358 | #define CONFIG_UEC_ETH1 /* GETH1 */ | |
359 | ||
360 | #ifdef CONFIG_UEC_ETH1 | |
6d0f6bcf JCPV |
361 | #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ |
362 | #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE | |
363 | #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 | |
364 | #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH | |
365 | #define CONFIG_SYS_UEC1_PHY_ADDR 7 | |
366 | #define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID | |
da9d4610 AF |
367 | #endif |
368 | ||
369 | #define CONFIG_UEC_ETH2 /* GETH2 */ | |
370 | ||
371 | #ifdef CONFIG_UEC_ETH2 | |
6d0f6bcf JCPV |
372 | #define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ |
373 | #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE | |
374 | #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 | |
375 | #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH | |
376 | #define CONFIG_SYS_UEC2_PHY_ADDR 1 | |
377 | #define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID | |
da9d4610 AF |
378 | #endif |
379 | #endif /* CONFIG_QE */ | |
380 | ||
f30ad49b HW |
381 | #if defined(CONFIG_PCI) |
382 | ||
383 | #define CONFIG_NET_MULTI | |
53677ef1 | 384 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
f30ad49b | 385 | |
67431059 AF |
386 | #undef CONFIG_EEPRO100 |
387 | #undef CONFIG_TULIP | |
388 | ||
389 | #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
6d0f6bcf | 390 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ |
67431059 AF |
391 | |
392 | #endif /* CONFIG_PCI */ | |
393 | ||
67431059 | 394 | #ifndef CONFIG_NET_MULTI |
53677ef1 | 395 | #define CONFIG_NET_MULTI 1 |
67431059 AF |
396 | #endif |
397 | ||
da9d4610 AF |
398 | #if defined(CONFIG_TSEC_ENET) |
399 | ||
67431059 | 400 | #define CONFIG_MII 1 /* MII PHY management */ |
255a3577 KP |
401 | #define CONFIG_TSEC1 1 |
402 | #define CONFIG_TSEC1_NAME "eTSEC0" | |
403 | #define CONFIG_TSEC2 1 | |
404 | #define CONFIG_TSEC2_NAME "eTSEC1" | |
67431059 AF |
405 | |
406 | #define TSEC1_PHY_ADDR 2 | |
407 | #define TSEC2_PHY_ADDR 3 | |
408 | ||
409 | #define TSEC1_PHYIDX 0 | |
410 | #define TSEC2_PHYIDX 0 | |
411 | ||
3a79013e AF |
412 | #define TSEC1_FLAGS TSEC_GIGABIT |
413 | #define TSEC2_FLAGS TSEC_GIGABIT | |
414 | ||
b96c83d4 | 415 | /* Options are: eTSEC[0-1] */ |
67431059 AF |
416 | #define CONFIG_ETHPRIME "eTSEC0" |
417 | ||
418 | #endif /* CONFIG_TSEC_ENET */ | |
419 | ||
420 | /* | |
421 | * Environment | |
422 | */ | |
5a1aceb0 | 423 | #define CONFIG_ENV_IS_IN_FLASH 1 |
6d0f6bcf | 424 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) |
0e8d1586 JCPV |
425 | #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ |
426 | #define CONFIG_ENV_SIZE 0x2000 | |
67431059 AF |
427 | |
428 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
6d0f6bcf | 429 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
67431059 | 430 | |
2835e518 | 431 | |
079a136c JL |
432 | /* |
433 | * BOOTP options | |
434 | */ | |
435 | #define CONFIG_BOOTP_BOOTFILESIZE | |
436 | #define CONFIG_BOOTP_BOOTPATH | |
437 | #define CONFIG_BOOTP_GATEWAY | |
438 | #define CONFIG_BOOTP_HOSTNAME | |
439 | ||
440 | ||
2835e518 JL |
441 | /* |
442 | * Command line configuration. | |
443 | */ | |
444 | #include <config_cmd_default.h> | |
445 | ||
446 | #define CONFIG_CMD_PING | |
447 | #define CONFIG_CMD_I2C | |
448 | #define CONFIG_CMD_MII | |
82ac8c97 | 449 | #define CONFIG_CMD_ELF |
1c9aa76b KG |
450 | #define CONFIG_CMD_IRQ |
451 | #define CONFIG_CMD_SETEXPR | |
2835e518 | 452 | |
67431059 | 453 | #if defined(CONFIG_PCI) |
2835e518 | 454 | #define CONFIG_CMD_PCI |
67431059 | 455 | #endif |
2835e518 | 456 | |
67431059 AF |
457 | |
458 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
459 | ||
460 | /* | |
461 | * Miscellaneous configurable options | |
462 | */ | |
6d0f6bcf | 463 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
22abb2d2 | 464 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
6d0f6bcf JCPV |
465 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
466 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
2835e518 | 467 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 468 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
67431059 | 469 | #else |
6d0f6bcf | 470 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
67431059 | 471 | #endif |
6d0f6bcf JCPV |
472 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
473 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
474 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
475 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
67431059 AF |
476 | |
477 | /* | |
478 | * For booting Linux, the board info and command line data | |
479 | * have to be in the first 8 MB of memory, since this is | |
480 | * the maximum mapped by the Linux kernel during initialization. | |
481 | */ | |
6d0f6bcf | 482 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ |
67431059 | 483 | |
67431059 AF |
484 | /* |
485 | * Internal Definitions | |
486 | * | |
487 | * Boot Flags | |
488 | */ | |
489 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
490 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
491 | ||
2835e518 | 492 | #if defined(CONFIG_CMD_KGDB) |
67431059 AF |
493 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
494 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
495 | #endif | |
496 | ||
497 | /* | |
498 | * Environment Configuration | |
499 | */ | |
500 | ||
501 | /* The mac addresses for all ethernet interface */ | |
da9d4610 AF |
502 | #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) |
503 | #define CONFIG_HAS_ETH0 | |
67431059 AF |
504 | #define CONFIG_ETHADDR 00:E0:0C:00:00:FD |
505 | #define CONFIG_HAS_ETH1 | |
506 | #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD | |
507 | #define CONFIG_HAS_ETH2 | |
508 | #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD | |
da9d4610 AF |
509 | #define CONFIG_HAS_ETH3 |
510 | #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD | |
67431059 AF |
511 | #endif |
512 | ||
513 | #define CONFIG_IPADDR 192.168.1.253 | |
514 | ||
515 | #define CONFIG_HOSTNAME unknown | |
516 | #define CONFIG_ROOTPATH /nfsroot | |
517 | #define CONFIG_BOOTFILE your.uImage | |
518 | ||
519 | #define CONFIG_SERVERIP 192.168.1.1 | |
520 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
521 | #define CONFIG_NETMASK 255.255.255.0 | |
522 | ||
523 | #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ | |
524 | ||
525 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
526 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ | |
527 | ||
528 | #define CONFIG_BAUDRATE 115200 | |
529 | ||
530 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
531 | "netdev=eth0\0" \ | |
532 | "consoledev=ttyS0\0" \ | |
533 | "ramdiskaddr=600000\0" \ | |
534 | "ramdiskfile=your.ramdisk.u-boot\0" \ | |
535 | "fdtaddr=400000\0" \ | |
536 | "fdtfile=your.fdt.dtb\0" \ | |
537 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
538 | "nfsroot=$serverip:$rootpath " \ | |
539 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
540 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
541 | "ramargs=setenv bootargs root=/dev/ram rw " \ | |
542 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
543 | ||
544 | ||
545 | #define CONFIG_NFSBOOTCOMMAND \ | |
546 | "run nfsargs;" \ | |
547 | "tftp $loadaddr $bootfile;" \ | |
548 | "tftp $fdtaddr $fdtfile;" \ | |
549 | "bootm $loadaddr - $fdtaddr" | |
550 | ||
551 | ||
552 | #define CONFIG_RAMBOOTCOMMAND \ | |
553 | "run ramargs;" \ | |
554 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
555 | "tftp $loadaddr $bootfile;" \ | |
556 | "bootm $loadaddr $ramdiskaddr" | |
557 | ||
558 | #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND | |
559 | ||
560 | #endif /* __CONFIG_H */ |