projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 765547dc | 1 | /* |
| 3aed5507 | 2 | * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. |
| 765547dc HW |
3 | * |
| 4 | * See file CREDITS for list of people who contributed to this | |
| 5 | * project. | |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or | |
| 8 | * modify it under the terms of the GNU General Public License as | |
| 9 | * published by the Free Software Foundation; either version 2 of | |
| 10 | * the License, or (at your option) any later version. | |
| 11 | * | |
| 12 | * This program is distributed in the hope that it will be useful, | |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 | * GNU General Public License for more details. | |
| 16 | * | |
| 17 | * You should have received a copy of the GNU General Public License | |
| 18 | * along with this program; if not, write to the Free Software | |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 20 | * MA 02111-1307 USA | |
| 21 | */ | |
| 22 | ||
| 23 | /* | |
| 24 | * mpc8569mds board configuration file | |
| 25 | */ | |
| 26 | #ifndef __CONFIG_H | |
| 27 | #define __CONFIG_H | |
| 28 | ||
| 29 | /* High Level Configuration Options */ | |
| 30 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
| 31 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
| 32 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ | |
| 33 | #define CONFIG_MPC8569 1 /* MPC8569 specific */ | |
| 34 | #define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */ | |
| 35 | ||
| 36 | #define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */ | |
| 37 | ||
| 38 | #define CONFIG_PCI 1 /* Disable PCI/PCIE */ | |
| 39 | #define CONFIG_PCIE1 1 /* PCIE controller */ | |
| 40 | #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ | |
| 41 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ | |
| 42 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ | |
| 43 | #define CONFIG_QE /* Enable QE */ | |
| 44 | #define CONFIG_ENV_OVERWRITE | |
| 45 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ | |
| 46 | ||
| 765547dc HW |
47 | #ifndef __ASSEMBLY__ |
| 48 | extern unsigned long get_clock_freq(void); | |
| 49 | #endif | |
| 50 | /* Replace a call to get_clock_freq (after it is implemented)*/ | |
| 67351049 DL |
51 | #define CONFIG_SYS_CLK_FREQ 66666666 |
| 52 | #define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ | |
| 765547dc | 53 | |
| d24f2d32 | 54 | #ifdef CONFIG_ATM |
| c95d541e LY |
55 | #define CONFIG_PQ_MDS_PIB |
| 56 | #define CONFIG_PQ_MDS_PIB_ATM | |
| 57 | #endif | |
| 58 | ||
| 765547dc HW |
59 | /* |
| 60 | * These can be toggled for performance analysis, otherwise use default. | |
| 61 | */ | |
| 62 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
| 63 | #define CONFIG_BTB /* toggle branch predition */ | |
| 64 | ||
| d24f2d32 | 65 | #ifdef CONFIG_NAND |
| 674ef7bd LY |
66 | #define CONFIG_NAND_U_BOOT 1 |
| 67 | #define CONFIG_RAMBOOT_NAND 1 | |
| 2ae18241 WD |
68 | #define CONFIG_SYS_TEXT_BASE 0xf8f82000 |
| 69 | #endif | |
| 70 | ||
| 71 | #ifndef CONFIG_SYS_TEXT_BASE | |
| 72 | #define CONFIG_SYS_TEXT_BASE 0xfff80000 | |
| 674ef7bd LY |
73 | #endif |
| 74 | ||
| 765547dc HW |
75 | /* |
| 76 | * Only possible on E500 Version 2 or newer cores. | |
| 77 | */ | |
| 78 | #define CONFIG_ENABLE_36BIT_PHYS 1 | |
| 79 | ||
| 80 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ | |
| 3aed5507 | 81 | #define CONFIG_BOARD_EARLY_INIT_R 1 |
| 7f52ed5e | 82 | #define CONFIG_HWCONFIG |
| 765547dc HW |
83 | |
| 84 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 85 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 86 | ||
| 674ef7bd LY |
87 | /* |
| 88 | * Config the L2 Cache as L2 SRAM | |
| 89 | */ | |
| 90 | #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 | |
| 91 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
| 92 | #define CONFIG_SYS_L2_SIZE (512 << 10) | |
| 93 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
| 94 | ||
| 765547dc HW |
95 | /* |
| 96 | * Base addresses -- Note these are effective addresses where the | |
| 97 | * actual resources get mapped (not physical addresses) | |
| 98 | */ | |
| 765547dc HW |
99 | #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ |
| 100 | #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR | |
| 101 | /* physical addr of CCSRBAR */ | |
| 102 | #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR | |
| 103 | /* PQII uses CONFIG_SYS_IMMR */ | |
| 104 | ||
| 674ef7bd LY |
105 | #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL) |
| 106 | #define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR | |
| 107 | #else | |
| 108 | #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ | |
| 109 | #endif | |
| 110 | ||
| 765547dc HW |
111 | /* DDR Setup */ |
| 112 | #define CONFIG_FSL_DDR3 | |
| 113 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
| 114 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ | |
| 115 | #define CONFIG_DDR_SPD | |
| 116 | #define CONFIG_DDR_DLL /* possible DLL fix needed */ | |
| 117 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ | |
| 118 | ||
| 119 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
| 120 | ||
| 121 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 122 | /* DDR is system memory*/ | |
| 123 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 124 | ||
| 125 | #define CONFIG_NUM_DDR_CONTROLLERS 1 | |
| 126 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 127 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 128 | ||
| 129 | /* I2C addresses of SPD EEPROMs */ | |
| 130 | #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ | |
| 131 | #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ | |
| 132 | ||
| 133 | /* These are used when DDR doesn't use SPD. */ | |
| 134 | #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ | |
| 135 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F | |
| 136 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 | |
| 137 | #define CONFIG_SYS_DDR_TIMING_3 0x00020000 | |
| 138 | #define CONFIG_SYS_DDR_TIMING_0 0x00330004 | |
| 139 | #define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644 | |
| 140 | #define CONFIG_SYS_DDR_TIMING_2 0x002888D0 | |
| 141 | #define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000 | |
| 142 | #define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040 | |
| 143 | #define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521 | |
| 144 | #define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000 | |
| 145 | #define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000 | |
| 146 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 147 | #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000 | |
| 148 | #define CONFIG_SYS_DDR_TIMING_4 0x00220001 | |
| 149 | #define CONFIG_SYS_DDR_TIMING_5 0x03402400 | |
| 150 | #define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 | |
| 151 | #define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604 | |
| 152 | #define CONFIG_SYS_DDR_CDR_1 0x80040000 | |
| 153 | #define CONFIG_SYS_DDR_CDR_2 0x00000000 | |
| 154 | #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 | |
| 155 | #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 | |
| 156 | #define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */ | |
| 157 | #define CONFIG_SYS_DDR_CONTROL2 0x24400000 | |
| 158 | ||
| 159 | #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d | |
| 160 | #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 | |
| 161 | #define CONFIG_SYS_DDR_SBE 0x00010000 | |
| 162 | ||
| 163 | #undef CONFIG_CLOCKS_IN_MHZ | |
| 164 | ||
| 165 | /* | |
| 166 | * Local Bus Definitions | |
| 167 | */ | |
| 168 | ||
| 169 | #define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ | |
| 170 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 171 | ||
| 172 | #define CONFIG_SYS_BCSR_BASE 0xf8000000 | |
| 173 | #define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE | |
| 174 | ||
| 175 | /*Chip select 0 - Flash*/ | |
| 674ef7bd LY |
176 | #define CONFIG_FLASH_BR_PRELIM 0xfe000801 |
| 177 | #define CONFIG_FLASH_OR_PRELIM 0xfe000ff7 | |
| 765547dc | 178 | |
| 399b53cb | 179 | /*Chip select 1 - BCSR*/ |
| 765547dc HW |
180 | #define CONFIG_SYS_BR1_PRELIM 0xf8000801 |
| 181 | #define CONFIG_SYS_OR1_PRELIM 0xffffe9f7 | |
| 182 | ||
| 399b53cb HW |
183 | /*Chip select 4 - PIB*/ |
| 184 | #define CONFIG_SYS_BR4_PRELIM 0xf8008801 | |
| 185 | #define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 | |
| 186 | ||
| 187 | /*Chip select 5 - PIB*/ | |
| 188 | #define CONFIG_SYS_BR5_PRELIM 0xf8010801 | |
| 189 | #define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 | |
| 190 | ||
| 765547dc HW |
191 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ |
| 192 | #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ | |
| 193 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
| 194 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 195 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 196 | ||
| 14d0a02a | 197 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
| 765547dc | 198 | |
| 674ef7bd LY |
199 | #if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) |
| 200 | #define CONFIG_SYS_RAMBOOT | |
| 201 | #else | |
| 202 | #undef CONFIG_SYS_RAMBOOT | |
| 203 | #endif | |
| 204 | ||
| 765547dc HW |
205 | #define CONFIG_FLASH_CFI_DRIVER |
| 206 | #define CONFIG_SYS_FLASH_CFI | |
| 207 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 208 | ||
| a29155e1 | 209 | /* Chip select 3 - NAND */ |
| 674ef7bd | 210 | #ifndef CONFIG_NAND_SPL |
| a29155e1 | 211 | #define CONFIG_SYS_NAND_BASE 0xFC000000 |
| 674ef7bd LY |
212 | #else |
| 213 | #define CONFIG_SYS_NAND_BASE 0xFFF00000 | |
| 214 | #endif | |
| 215 | ||
| 216 | /* NAND boot: 4K NAND loader config */ | |
| 217 | #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 | |
| 218 | #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) | |
| 219 | #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) | |
| 220 | #define CONFIG_SYS_NAND_U_BOOT_START \ | |
| 221 | (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) | |
| 222 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) | |
| 223 | #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) | |
| 224 | #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) | |
| 225 | ||
| a29155e1 AV |
226 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE |
| 227 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } | |
| 228 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 229 | #define CONFIG_MTD_NAND_VERIFY_WRITE 1 | |
| 230 | #define CONFIG_CMD_NAND 1 | |
| 231 | #define CONFIG_NAND_FSL_ELBC 1 | |
| 232 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 233 | #define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ | |
| 234 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | |
| 235 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 236 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 237 | | BR_V) /* valid */ | |
| 238 | #define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | |
| 239 | | OR_FCM_CSCT \ | |
| 240 | | OR_FCM_CST \ | |
| 241 | | OR_FCM_CHT \ | |
| 242 | | OR_FCM_SCY_1 \ | |
| 243 | | OR_FCM_TRLX \ | |
| 244 | | OR_FCM_EHTR) | |
| 674ef7bd LY |
245 | |
| 246 | #ifdef CONFIG_RAMBOOT_NAND | |
| 247 | #define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ | |
| 248 | #define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 249 | #define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 250 | #define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
| 251 | #else | |
| 252 | #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 253 | #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
| a29155e1 AV |
254 | #define CONFIG_SYS_BR3_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ |
| 255 | #define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 674ef7bd | 256 | #endif |
| 765547dc HW |
257 | |
| 258 | /* | |
| 259 | * SDRAM on the LocalBus | |
| 260 | */ | |
| 261 | #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ | |
| 262 | #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ | |
| 263 | ||
| 264 | #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ | |
| 265 | #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ | |
| 266 | #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ | |
| 267 | #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ | |
| 268 | ||
| 269 | #define CONFIG_SYS_INIT_RAM_LOCK 1 | |
| 270 | #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ | |
| 271 | #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ | |
| 272 | ||
| 273 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ | |
| 274 | #define CONFIG_SYS_GBL_DATA_OFFSET \ | |
| 275 | (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
| 276 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 277 | ||
| 278 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ | |
| fb279490 | 279 | #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ |
| 765547dc HW |
280 | |
| 281 | /* Serial Port */ | |
| 282 | #define CONFIG_CONS_INDEX 1 | |
| 7f52ed5e | 283 | #define CONFIG_SERIAL_MULTI 1 |
| 765547dc HW |
284 | #define CONFIG_SYS_NS16550 |
| 285 | #define CONFIG_SYS_NS16550_SERIAL | |
| 286 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 287 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| 93341909 KG |
288 | #ifdef CONFIG_NAND_SPL |
| 289 | #define CONFIG_NS16550_MIN_FUNCTIONS | |
| 290 | #endif | |
| 765547dc HW |
291 | |
| 292 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 293 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} | |
| 294 | ||
| 295 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) | |
| 296 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
| 297 | ||
| 298 | /* Use the HUSH parser*/ | |
| 299 | #define CONFIG_SYS_HUSH_PARSER | |
| 300 | #ifdef CONFIG_SYS_HUSH_PARSER | |
| 301 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 302 | #endif | |
| 303 | ||
| 304 | /* pass open firmware flat tree */ | |
| 305 | #define CONFIG_OF_LIBFDT 1 | |
| 306 | #define CONFIG_OF_BOARD_SETUP 1 | |
| 307 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
| 308 | ||
| 765547dc HW |
309 | /* |
| 310 | * I2C | |
| 311 | */ | |
| 312 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
| 313 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
| 314 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
| 315 | #define CONFIG_I2C_MULTI_BUS | |
| 765547dc HW |
316 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
| 317 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| 318 | #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ | |
| 319 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
| 320 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
| 321 | ||
| 322 | /* | |
| 323 | * I2C2 EEPROM | |
| 324 | */ | |
| 325 | #define CONFIG_ID_EEPROM | |
| 326 | #ifdef CONFIG_ID_EEPROM | |
| 327 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 328 | #endif | |
| 329 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 | |
| 330 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 331 | #define CONFIG_SYS_EEPROM_BUS_NUM 1 | |
| 332 | ||
| 333 | #define PLPPAR1_I2C_BIT_MASK 0x0000000F | |
| 334 | #define PLPPAR1_I2C2_VAL 0x00000000 | |
| 7f52ed5e | 335 | #define PLPPAR1_ESDHC_VAL 0x0000000A |
| 765547dc HW |
336 | #define PLPDIR1_I2C_BIT_MASK 0x0000000F |
| 337 | #define PLPDIR1_I2C2_VAL 0x0000000F | |
| 7f52ed5e | 338 | #define PLPDIR1_ESDHC_VAL 0x00000006 |
| c4ca10f1 AV |
339 | #define PLPPAR1_UART0_BIT_MASK 0x00000fc0 |
| 340 | #define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80 | |
| 341 | #define PLPDIR1_UART0_BIT_MASK 0x00000fc0 | |
| 342 | #define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80 | |
| 765547dc HW |
343 | |
| 344 | /* | |
| 345 | * General PCI | |
| 346 | * Memory Addresses are mapped 1-1. I/O is mapped from 0 | |
| 347 | */ | |
| 348 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 | |
| 349 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 | |
| 350 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 | |
| 351 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 352 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 | |
| 353 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 354 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 | |
| 355 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ | |
| 356 | ||
| 357 | #define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000 | |
| 358 | #define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000 | |
| 359 | #define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000 | |
| 360 | ||
| 361 | #ifdef CONFIG_QE | |
| 362 | /* | |
| 363 | * QE UEC ethernet configuration | |
| 364 | */ | |
| f82107f6 HW |
365 | #define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */ |
| 366 | #undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */ | |
| 765547dc HW |
367 | |
| 368 | #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) | |
| 369 | #define CONFIG_UEC_ETH | |
| 78b7a8ef | 370 | #define CONFIG_ETHPRIME "UEC0" |
| 765547dc HW |
371 | #define CONFIG_PHY_MODE_NEED_CHANGE |
| 372 | ||
| 373 | #define CONFIG_UEC_ETH1 /* GETH1 */ | |
| 374 | #define CONFIG_HAS_ETH0 | |
| 375 | ||
| 376 | #ifdef CONFIG_UEC_ETH1 | |
| 377 | #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ | |
| 378 | #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE | |
| f82107f6 | 379 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 765547dc HW |
380 | #define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 |
| 381 | #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH | |
| 382 | #define CONFIG_SYS_UEC1_PHY_ADDR 7 | |
| 582c55a0 HS |
383 | #define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID |
| 384 | #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
385 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 386 | #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */ | |
| 387 | #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH | |
| 388 | #define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */ | |
| 582c55a0 HS |
389 | #define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII |
| 390 | #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 | |
| f82107f6 HW |
391 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 392 | #endif /* CONFIG_UEC_ETH1 */ | |
| 765547dc HW |
393 | |
| 394 | #define CONFIG_UEC_ETH2 /* GETH2 */ | |
| 395 | #define CONFIG_HAS_ETH1 | |
| 396 | ||
| 397 | #ifdef CONFIG_UEC_ETH2 | |
| 398 | #define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ | |
| 399 | #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE | |
| f82107f6 | 400 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 765547dc HW |
401 | #define CONFIG_SYS_UEC2_TX_CLK QE_CLK17 |
| 402 | #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH | |
| 403 | #define CONFIG_SYS_UEC2_PHY_ADDR 1 | |
| 582c55a0 HS |
404 | #define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID |
| 405 | #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
406 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 407 | #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */ | |
| 408 | #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH | |
| 409 | #define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */ | |
| 582c55a0 HS |
410 | #define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII |
| 411 | #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 | |
| f82107f6 HW |
412 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 413 | #endif /* CONFIG_UEC_ETH2 */ | |
| 765547dc | 414 | |
| 750098d3 HW |
415 | #define CONFIG_UEC_ETH3 /* GETH3 */ |
| 416 | #define CONFIG_HAS_ETH2 | |
| 417 | ||
| 418 | #ifdef CONFIG_UEC_ETH3 | |
| 419 | #define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */ | |
| 420 | #define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE | |
| f82107f6 | 421 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 750098d3 HW |
422 | #define CONFIG_SYS_UEC3_TX_CLK QE_CLK12 |
| 423 | #define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH | |
| 424 | #define CONFIG_SYS_UEC3_PHY_ADDR 2 | |
| 582c55a0 HS |
425 | #define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID |
| 426 | #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
427 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 428 | #define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */ | |
| 429 | #define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH | |
| 430 | #define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */ | |
| 582c55a0 HS |
431 | #define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII |
| 432 | #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100 | |
| f82107f6 HW |
433 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 434 | #endif /* CONFIG_UEC_ETH3 */ | |
| 750098d3 HW |
435 | |
| 436 | #define CONFIG_UEC_ETH4 /* GETH4 */ | |
| 437 | #define CONFIG_HAS_ETH3 | |
| 438 | ||
| 439 | #ifdef CONFIG_UEC_ETH4 | |
| 440 | #define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */ | |
| 441 | #define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE | |
| f82107f6 | 442 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 750098d3 HW |
443 | #define CONFIG_SYS_UEC4_TX_CLK QE_CLK17 |
| 444 | #define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH | |
| 445 | #define CONFIG_SYS_UEC4_PHY_ADDR 3 | |
| 582c55a0 HS |
446 | #define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID |
| 447 | #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
448 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 449 | #define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */ | |
| 450 | #define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH | |
| 451 | #define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */ | |
| 582c55a0 HS |
452 | #define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII |
| 453 | #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100 | |
| f82107f6 HW |
454 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 455 | #endif /* CONFIG_UEC_ETH4 */ | |
| 3bd8e532 HW |
456 | |
| 457 | #undef CONFIG_UEC_ETH6 /* GETH6 */ | |
| 458 | #define CONFIG_HAS_ETH5 | |
| 459 | ||
| 460 | #ifdef CONFIG_UEC_ETH6 | |
| 461 | #define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */ | |
| 462 | #define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE | |
| 463 | #define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE | |
| 464 | #define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH | |
| 465 | #define CONFIG_SYS_UEC6_PHY_ADDR 4 | |
| 582c55a0 HS |
466 | #define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII |
| 467 | #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000 | |
| 3bd8e532 HW |
468 | #endif /* CONFIG_UEC_ETH6 */ |
| 469 | ||
| 470 | #undef CONFIG_UEC_ETH8 /* GETH8 */ | |
| 471 | #define CONFIG_HAS_ETH7 | |
| 472 | ||
| 473 | #ifdef CONFIG_UEC_ETH8 | |
| 474 | #define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */ | |
| 475 | #define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE | |
| 476 | #define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE | |
| 477 | #define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH | |
| 478 | #define CONFIG_SYS_UEC8_PHY_ADDR 6 | |
| 582c55a0 HS |
479 | #define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII |
| 480 | #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000 | |
| 3bd8e532 HW |
481 | #endif /* CONFIG_UEC_ETH8 */ |
| 482 | ||
| 765547dc HW |
483 | #endif /* CONFIG_QE */ |
| 484 | ||
| 485 | #if defined(CONFIG_PCI) | |
| 486 | ||
| 487 | #define CONFIG_NET_MULTI | |
| 488 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| 489 | ||
| 490 | #undef CONFIG_EEPRO100 | |
| 491 | #undef CONFIG_TULIP | |
| 492 | ||
| 493 | #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 494 | ||
| 495 | #endif /* CONFIG_PCI */ | |
| 496 | ||
| 497 | #ifndef CONFIG_NET_MULTI | |
| 498 | #define CONFIG_NET_MULTI 1 | |
| 499 | #endif | |
| 500 | ||
| 501 | /* | |
| 502 | * Environment | |
| 503 | */ | |
| 674ef7bd LY |
504 | #if defined(CONFIG_SYS_RAMBOOT) |
| 505 | #if defined(CONFIG_RAMBOOT_NAND) | |
| 506 | #define CONFIG_ENV_IS_IN_NAND 1 | |
| 507 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| 508 | #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 509 | #endif | |
| 510 | #else | |
| 765547dc | 511 | #define CONFIG_ENV_IS_IN_FLASH 1 |
| fb279490 | 512 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| 1b8e4fa1 HW |
513 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ |
| 514 | #define CONFIG_ENV_SIZE 0x2000 | |
| 674ef7bd | 515 | #endif |
| 765547dc HW |
516 | |
| 517 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
| 518 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
| 519 | ||
| 520 | /* QE microcode/firmware address */ | |
| 521 | #define CONFIG_SYS_QE_FW_ADDR 0xfff00000 | |
| 522 | ||
| 523 | /* | |
| 524 | * BOOTP options | |
| 525 | */ | |
| 526 | #define CONFIG_BOOTP_BOOTFILESIZE | |
| 527 | #define CONFIG_BOOTP_BOOTPATH | |
| 528 | #define CONFIG_BOOTP_GATEWAY | |
| 529 | #define CONFIG_BOOTP_HOSTNAME | |
| 530 | ||
| 531 | ||
| 532 | /* | |
| 533 | * Command line configuration. | |
| 534 | */ | |
| 535 | #include <config_cmd_default.h> | |
| 536 | ||
| 537 | #define CONFIG_CMD_PING | |
| 538 | #define CONFIG_CMD_I2C | |
| 539 | #define CONFIG_CMD_MII | |
| 540 | #define CONFIG_CMD_ELF | |
| 541 | #define CONFIG_CMD_IRQ | |
| 542 | #define CONFIG_CMD_SETEXPR | |
| 199e262e | 543 | #define CONFIG_CMD_REGINFO |
| 765547dc HW |
544 | |
| 545 | #if defined(CONFIG_PCI) | |
| 546 | #define CONFIG_CMD_PCI | |
| 547 | #endif | |
| 548 | ||
| 549 | ||
| 550 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
| 551 | ||
| 7f52ed5e AV |
552 | #define CONFIG_MMC 1 |
| 553 | ||
| 554 | #ifdef CONFIG_MMC | |
| 555 | #define CONFIG_FSL_ESDHC | |
| 556 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 557 | #define CONFIG_CMD_MMC | |
| 558 | #define CONFIG_GENERIC_MMC | |
| 559 | #define CONFIG_CMD_EXT2 | |
| 560 | #define CONFIG_CMD_FAT | |
| 561 | #define CONFIG_DOS_PARTITION | |
| 562 | #endif | |
| 563 | ||
| 765547dc HW |
564 | /* |
| 565 | * Miscellaneous configurable options | |
| 566 | */ | |
| 5be58f5f KP |
567 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 568 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 569 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 765547dc HW |
570 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| 571 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 572 | #if defined(CONFIG_CMD_KGDB) | |
| 573 | #define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ | |
| 574 | #else | |
| 575 | #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ | |
| 576 | #endif | |
| 577 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 578 | /* Print Buffer Size */ | |
| 579 | #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ | |
| 580 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| 581 | /* Boot Argument Buffer Size */ | |
| 582 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
| 583 | ||
| 584 | /* | |
| 585 | * For booting Linux, the board info and command line data | |
| 89188a62 | 586 | * have to be in the first 16 MB of memory, since this is |
| 765547dc HW |
587 | * the maximum mapped by the Linux kernel during initialization. |
| 588 | */ | |
| 89188a62 | 589 | #define CONFIG_SYS_BOOTMAPSZ (16 << 20) |
| 765547dc HW |
590 | /* Initial Memory map for Linux*/ |
| 591 | ||
| 765547dc HW |
592 | #if defined(CONFIG_CMD_KGDB) |
| 593 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 594 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| 595 | #endif | |
| 596 | ||
| 597 | /* | |
| 598 | * Environment Configuration | |
| 599 | */ | |
| 600 | #define CONFIG_HOSTNAME mpc8569mds | |
| 601 | #define CONFIG_ROOTPATH /nfsroot | |
| 602 | #define CONFIG_BOOTFILE your.uImage | |
| 603 | ||
| 604 | #define CONFIG_SERVERIP 192.168.1.1 | |
| 605 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
| 606 | #define CONFIG_NETMASK 255.255.255.0 | |
| 607 | ||
| 608 | #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ | |
| 609 | ||
| 610 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 611 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ | |
| 612 | ||
| 613 | #define CONFIG_BAUDRATE 115200 | |
| 614 | ||
| 615 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 616 | "netdev=eth0\0" \ | |
| 617 | "consoledev=ttyS0\0" \ | |
| 618 | "ramdiskaddr=600000\0" \ | |
| 619 | "ramdiskfile=your.ramdisk.u-boot\0" \ | |
| 620 | "fdtaddr=400000\0" \ | |
| 621 | "fdtfile=your.fdt.dtb\0" \ | |
| 622 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
| 623 | "nfsroot=$serverip:$rootpath " \ | |
| 624 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 625 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
| 626 | "ramargs=setenv bootargs root=/dev/ram rw " \ | |
| 627 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
| 628 | ||
| 629 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 630 | "run nfsargs;" \ | |
| 631 | "tftp $loadaddr $bootfile;" \ | |
| 632 | "tftp $fdtaddr $fdtfile;" \ | |
| 633 | "bootm $loadaddr - $fdtaddr" | |
| 634 | ||
| 635 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 636 | "run ramargs;" \ | |
| 637 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 638 | "tftp $loadaddr $bootfile;" \ | |
| 639 | "bootm $loadaddr $ramdiskaddr" | |
| 640 | ||
| 641 | #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND | |
| 642 | ||
| 643 | #endif /* __CONFIG_H */ |