projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 4f1d1b7d | 1 | /* |
| 3d7506fa | 2 | * Copyright 2011-2012 Freescale Semiconductor, Inc. |
| 4f1d1b7d | 3 | * |
| 1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 4f1d1b7d MH |
5 | */ |
| 6 | ||
| 7 | /* | |
| 8 | * P2041 RDB board configuration file | |
| 3e978f5d | 9 | * Also supports P2040 RDB |
| 4f1d1b7d MH |
10 | */ |
| 11 | #ifndef __CONFIG_H | |
| 12 | #define __CONFIG_H | |
| 13 | ||
| 4f1d1b7d MH |
14 | #ifdef CONFIG_RAMBOOT_PBL |
| 15 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
| 16 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| e4536f8e MY |
17 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg |
| 18 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg | |
| 4f1d1b7d MH |
19 | #endif |
| 20 | ||
| 461632bd | 21 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| ff65f126 | 22 | /* Set 1M boot space */ |
| 461632bd LG |
23 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) |
| 24 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ | |
| 25 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) | |
| ff65f126 LG |
26 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc |
| 27 | #define CONFIG_SYS_NO_FLASH | |
| 28 | #endif | |
| 29 | ||
| 4f1d1b7d | 30 | /* High Level Configuration Options */ |
| 4f1d1b7d | 31 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ |
| 4f1d1b7d MH |
32 | #define CONFIG_MP /* support multiple processors */ |
| 33 | ||
| 34 | #ifndef CONFIG_SYS_TEXT_BASE | |
| e222b1f3 | 35 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| 4f1d1b7d MH |
36 | #endif |
| 37 | ||
| 38 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 39 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 40 | #endif | |
| 41 | ||
| 42 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 43 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
| 44 | #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ | |
| 737537ef | 45 | #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
| b38eaec5 RD |
46 | #define CONFIG_PCIE1 /* PCIE controller 1 */ |
| 47 | #define CONFIG_PCIE2 /* PCIE controller 2 */ | |
| 48 | #define CONFIG_PCIE3 /* PCIE controller 3 */ | |
| 4f1d1b7d MH |
49 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| 50 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 51 | ||
| 52 | #define CONFIG_SYS_SRIO | |
| 53 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
| 54 | #define CONFIG_SRIO2 /* SRIO port 2 */ | |
| c8b28152 | 55 | #define CONFIG_SRIO_PCIE_BOOT_MASTER |
| 4d28db8a | 56 | #define CONFIG_SYS_DPAA_RMAN /* RMan */ |
| 4f1d1b7d | 57 | |
| 4f1d1b7d MH |
58 | #define CONFIG_ENV_OVERWRITE |
| 59 | ||
| 60 | #ifdef CONFIG_SYS_NO_FLASH | |
| 461632bd | 61 | #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 4f1d1b7d | 62 | #define CONFIG_ENV_IS_NOWHERE |
| 0f57f6a3 | 63 | #endif |
| 4f1d1b7d MH |
64 | #else |
| 65 | #define CONFIG_FLASH_CFI_DRIVER | |
| 66 | #define CONFIG_SYS_FLASH_CFI | |
| 0f57f6a3 | 67 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| 4f1d1b7d MH |
68 | #endif |
| 69 | ||
| 70 | #if defined(CONFIG_SPIFLASH) | |
| 71 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 72 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 73 | #define CONFIG_ENV_SPI_BUS 0 | |
| 74 | #define CONFIG_ENV_SPI_CS 0 | |
| 75 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 76 | #define CONFIG_ENV_SPI_MODE 0 | |
| 77 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 78 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 79 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 80 | #elif defined(CONFIG_SDCARD) | |
| 81 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 82 | #define CONFIG_ENV_IS_IN_MMC | |
| 4394d0c2 | 83 | #define CONFIG_FSL_FIXED_MMC_LOCATION |
| 4f1d1b7d MH |
84 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 85 | #define CONFIG_ENV_SIZE 0x2000 | |
| e222b1f3 | 86 | #define CONFIG_ENV_OFFSET (512 * 1658) |
| 15c8c6c2 SX |
87 | #elif defined(CONFIG_NAND) |
| 88 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 89 | #define CONFIG_ENV_IS_IN_NAND | |
| 90 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| e222b1f3 | 91 | #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 461632bd | 92 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| ff65f126 LG |
93 | #define CONFIG_ENV_IS_IN_REMOTE |
| 94 | #define CONFIG_ENV_ADDR 0xffe20000 | |
| 95 | #define CONFIG_ENV_SIZE 0x2000 | |
| 0f57f6a3 | 96 | #elif defined(CONFIG_ENV_IS_NOWHERE) |
| ff65f126 | 97 | #define CONFIG_ENV_SIZE 0x2000 |
| 4f1d1b7d MH |
98 | #else |
| 99 | #define CONFIG_ENV_IS_IN_FLASH | |
| 100 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ | |
| 101 | - CONFIG_ENV_SECT_SIZE) | |
| 102 | #define CONFIG_ENV_SIZE 0x2000 | |
| 103 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 104 | #endif | |
| 105 | ||
| 44d50f0b SX |
106 | #ifndef __ASSEMBLY__ |
| 107 | unsigned long get_board_sys_clk(unsigned long dummy); | |
| 108 | #endif | |
| 109 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) | |
| 4f1d1b7d MH |
110 | |
| 111 | /* | |
| 112 | * These can be toggled for performance analysis, otherwise use default. | |
| 113 | */ | |
| 114 | #define CONFIG_SYS_CACHE_STASHING | |
| cd420e0b MH |
115 | #define CONFIG_BACKSIDE_L2_CACHE |
| 116 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E | |
| 4f1d1b7d MH |
117 | #define CONFIG_BTB /* toggle branch predition */ |
| 118 | ||
| 119 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 120 | ||
| 121 | #ifdef CONFIG_PHYS_64BIT | |
| 122 | #define CONFIG_ADDR_MAP | |
| 123 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 124 | #endif | |
| 125 | ||
| 126 | #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ | |
| 127 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 128 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 129 | #define CONFIG_SYS_ALT_MEMTEST | |
| 130 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 131 | ||
| 132 | /* | |
| 133 | * Config the L3 Cache as L3 SRAM | |
| 134 | */ | |
| 135 | #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE | |
| 136 | #ifdef CONFIG_PHYS_64BIT | |
| 137 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ | |
| 138 | CONFIG_RAMBOOT_TEXT_BASE) | |
| 139 | #else | |
| 140 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR | |
| 141 | #endif | |
| 142 | #define CONFIG_SYS_L3_SIZE (1024 << 10) | |
| 143 | #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) | |
| 144 | ||
| 4f1d1b7d MH |
145 | #ifdef CONFIG_PHYS_64BIT |
| 146 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 147 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 148 | #endif | |
| 149 | ||
| 150 | /* EEPROM */ | |
| 151 | #define CONFIG_ID_EEPROM | |
| 152 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 153 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 154 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
| 155 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 156 | ||
| 157 | /* | |
| 158 | * DDR Setup | |
| 159 | */ | |
| 160 | #define CONFIG_VERY_BIG_RAM | |
| 161 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 162 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 163 | ||
| 164 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 165 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 166 | ||
| 167 | #define CONFIG_DDR_SPD | |
| 4f1d1b7d MH |
168 | |
| 169 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 170 | #define SPD_EEPROM_ADDRESS 0x52 | |
| 171 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 172 | ||
| 173 | /* | |
| 174 | * Local Bus Definitions | |
| 175 | */ | |
| 176 | ||
| 177 | /* Set the local bus clock 1/8 of platform clock */ | |
| 178 | #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 | |
| 179 | ||
| ca1b0b89 YS |
180 | /* |
| 181 | * This board doesn't have a promjet connector. | |
| 182 | * However, it uses commone corenet board LAW and TLB. | |
| 183 | * It is necessary to use the same start address with proper offset. | |
| 184 | */ | |
| 185 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 4f1d1b7d | 186 | #ifdef CONFIG_PHYS_64BIT |
| ca1b0b89 | 187 | #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull |
| 4f1d1b7d MH |
188 | #else |
| 189 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 190 | #endif | |
| 191 | ||
| c9b2feaf | 192 | #define CONFIG_SYS_FLASH_BR_PRELIM \ |
| ca1b0b89 YS |
193 | (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \ |
| 194 | BR_PS_16 | BR_V) | |
| c9b2feaf SX |
195 | #define CONFIG_SYS_FLASH_OR_PRELIM \ |
| 196 | ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ | |
| 197 | | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) | |
| 4f1d1b7d MH |
198 | |
| 199 | #define CONFIG_FSL_CPLD | |
| 200 | #define CPLD_BASE 0xffdf0000 /* CPLD registers */ | |
| 201 | #ifdef CONFIG_PHYS_64BIT | |
| 202 | #define CPLD_BASE_PHYS 0xfffdf0000ull | |
| 203 | #else | |
| 204 | #define CPLD_BASE_PHYS CPLD_BASE | |
| 205 | #endif | |
| 206 | ||
| 207 | #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) | |
| 208 | #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ | |
| 209 | ||
| 210 | #define PIXIS_LBMAP_SWITCH 7 | |
| 211 | #define PIXIS_LBMAP_MASK 0xf0 | |
| 212 | #define PIXIS_LBMAP_SHIFT 4 | |
| 213 | #define PIXIS_LBMAP_ALTBANK 0x40 | |
| 214 | ||
| 215 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 216 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 217 | ||
| 218 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
| 219 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 220 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */ | |
| 221 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */ | |
| 222 | ||
| 223 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| 224 | ||
| 225 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 226 | #define CONFIG_SYS_RAMBOOT | |
| 227 | #endif | |
| 228 | ||
| c9b2feaf SX |
229 | #define CONFIG_NAND_FSL_ELBC |
| 230 | /* Nand Flash */ | |
| 231 | #ifdef CONFIG_NAND_FSL_ELBC | |
| 232 | #define CONFIG_SYS_NAND_BASE 0xffa00000 | |
| 233 | #ifdef CONFIG_PHYS_64BIT | |
| 234 | #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull | |
| 235 | #else | |
| 236 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 237 | #endif | |
| 238 | ||
| 239 | #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} | |
| 240 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| c9b2feaf SX |
241 | #define CONFIG_CMD_NAND |
| 242 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 243 | ||
| 244 | /* NAND flash config */ | |
| 245 | #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 246 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | |
| 247 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 248 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 249 | | BR_V) /* valid */ | |
| 250 | #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | |
| 251 | | OR_FCM_PGS /* Large Page*/ \ | |
| 252 | | OR_FCM_CSCT \ | |
| 253 | | OR_FCM_CST \ | |
| 254 | | OR_FCM_CHT \ | |
| 255 | | OR_FCM_SCY_1 \ | |
| 256 | | OR_FCM_TRLX \ | |
| 257 | | OR_FCM_EHTR) | |
| 258 | ||
| 259 | #ifdef CONFIG_NAND | |
| 260 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ | |
| 261 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ | |
| 262 | #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 263 | #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ | |
| 264 | #else | |
| 265 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 266 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ | |
| 267 | #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ | |
| 268 | #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ | |
| 269 | #endif | |
| 270 | #else | |
| 271 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 272 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ | |
| 273 | #endif /* CONFIG_NAND_FSL_ELBC */ | |
| 274 | ||
| 4f1d1b7d MH |
275 | #define CONFIG_SYS_FLASH_EMPTY_INFO |
| 276 | #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 | |
| ca1b0b89 | 277 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} |
| 4f1d1b7d MH |
278 | |
| 279 | #define CONFIG_BOARD_EARLY_INIT_F | |
| 280 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
| 281 | #define CONFIG_MISC_INIT_R | |
| 282 | ||
| 283 | #define CONFIG_HWCONFIG | |
| 284 | ||
| 285 | /* define to use L1 as initial stack */ | |
| 286 | #define CONFIG_L1_INIT_RAM | |
| 287 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 288 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ | |
| 289 | #ifdef CONFIG_PHYS_64BIT | |
| 290 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| 291 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR | |
| 292 | /* The assembler doesn't like typecast */ | |
| 293 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 294 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 295 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 296 | #else | |
| 297 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR | |
| 298 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 | |
| 299 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 300 | #endif | |
| 301 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 302 | ||
| 303 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 304 | GENERATED_GBL_DATA_SIZE) | |
| 305 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 306 | ||
| 9307cbab | 307 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 4f1d1b7d MH |
308 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) |
| 309 | ||
| 310 | /* Serial Port - controlled on board with jumper J8 | |
| 311 | * open - index 2 | |
| 312 | * shorted - index 1 | |
| 313 | */ | |
| 314 | #define CONFIG_CONS_INDEX 1 | |
| 4f1d1b7d MH |
315 | #define CONFIG_SYS_NS16550_SERIAL |
| 316 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 317 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 318 | ||
| 319 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 320 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 321 | ||
| 322 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 323 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 324 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 325 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| 326 | ||
| 4f1d1b7d | 327 | /* I2C */ |
| 00f792e0 HS |
328 | #define CONFIG_SYS_I2C |
| 329 | #define CONFIG_SYS_I2C_FSL | |
| 330 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 | |
| 331 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 2bd1aab0 | 332 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 |
| 00f792e0 HS |
333 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 |
| 334 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 2bd1aab0 | 335 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 |
| 4f1d1b7d MH |
336 | |
| 337 | /* | |
| 338 | * RapidIO | |
| 339 | */ | |
| 340 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
| 341 | #ifdef CONFIG_PHYS_64BIT | |
| 342 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
| 343 | #else | |
| 344 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 | |
| 345 | #endif | |
| 346 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ | |
| 347 | ||
| 348 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
| 349 | #ifdef CONFIG_PHYS_64BIT | |
| 350 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull | |
| 351 | #else | |
| 352 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 | |
| 353 | #endif | |
| 354 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ | |
| 355 | ||
| ff65f126 LG |
356 | /* |
| 357 | * for slave u-boot IMAGE instored in master memory space, | |
| 358 | * PHYS must be aligned based on the SIZE | |
| 359 | */ | |
| e4911815 LG |
360 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull |
| 361 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull | |
| 362 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ | |
| 363 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull | |
| ff65f126 LG |
364 | /* |
| 365 | * for slave UCODE and ENV instored in master memory space, | |
| 366 | * PHYS must be aligned based on the SIZE | |
| 367 | */ | |
| e4911815 | 368 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull |
| b5f7c873 LG |
369 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull |
| 370 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ | |
| ff65f126 LG |
371 | |
| 372 | /* slave core release by master*/ | |
| b5f7c873 LG |
373 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 |
| 374 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ | |
| ff65f126 LG |
375 | |
| 376 | /* | |
| 461632bd | 377 | * SRIO_PCIE_BOOT - SLAVE |
| ff65f126 | 378 | */ |
| 461632bd LG |
379 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| 380 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 | |
| 381 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ | |
| 382 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) | |
| ff65f126 LG |
383 | #endif |
| 384 | ||
| 4f1d1b7d MH |
385 | /* |
| 386 | * eSPI - Enhanced SPI | |
| 387 | */ | |
| 4f1d1b7d MH |
388 | #define CONFIG_SF_DEFAULT_SPEED 10000000 |
| 389 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 390 | ||
| 391 | /* | |
| 392 | * General PCI | |
| 393 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 394 | */ | |
| 395 | ||
| 396 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 397 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 398 | #ifdef CONFIG_PHYS_64BIT | |
| 399 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 400 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 401 | #else | |
| 402 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 403 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 404 | #endif | |
| 405 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 406 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 407 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 408 | #ifdef CONFIG_PHYS_64BIT | |
| 409 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 410 | #else | |
| 411 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 | |
| 412 | #endif | |
| 413 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 414 | ||
| 415 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 416 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
| 417 | #ifdef CONFIG_PHYS_64BIT | |
| 418 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 419 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
| 420 | #else | |
| 421 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 | |
| 422 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 | |
| 423 | #endif | |
| 424 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 425 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
| 426 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 427 | #ifdef CONFIG_PHYS_64BIT | |
| 428 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
| 429 | #else | |
| 430 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 | |
| 431 | #endif | |
| 432 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 433 | ||
| 434 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 435 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 | |
| 436 | #ifdef CONFIG_PHYS_64BIT | |
| 437 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 438 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull | |
| 439 | #else | |
| 440 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 | |
| 441 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 | |
| 442 | #endif | |
| 443 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ | |
| 444 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
| 445 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 446 | #ifdef CONFIG_PHYS_64BIT | |
| 447 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
| 448 | #else | |
| 449 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 | |
| 450 | #endif | |
| 451 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 452 | ||
| 453 | /* Qman/Bman */ | |
| 454 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 455 | #define CONFIG_SYS_BMAN_NUM_PORTALS 10 | |
| 456 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 457 | #ifdef CONFIG_PHYS_64BIT | |
| 458 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 459 | #else | |
| 460 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE | |
| 461 | #endif | |
| 462 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 | |
| 3fa66db4 JL |
463 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 464 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
| 465 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
| 466 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 467 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
| 468 | CONFIG_SYS_BMAN_CENA_SIZE) | |
| 469 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 470 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
| 4f1d1b7d MH |
471 | #define CONFIG_SYS_QMAN_NUM_PORTALS 10 |
| 472 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 | |
| 473 | #ifdef CONFIG_PHYS_64BIT | |
| 474 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull | |
| 475 | #else | |
| 476 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE | |
| 477 | #endif | |
| 478 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 | |
| 3fa66db4 JL |
479 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 480 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
| 481 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
| 482 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 483 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
| 484 | CONFIG_SYS_QMAN_CENA_SIZE) | |
| 485 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 486 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
| 4f1d1b7d MH |
487 | |
| 488 | #define CONFIG_SYS_DPAA_FMAN | |
| 489 | #define CONFIG_SYS_DPAA_PME | |
| 490 | /* Default address of microcode for the Linux Fman driver */ | |
| 4f1d1b7d MH |
491 | #if defined(CONFIG_SPIFLASH) |
| 492 | /* | |
| 493 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 494 | * env, so we got 0x110000. | |
| 495 | */ | |
| f2717b47 | 496 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH |
| dcf1d774 | 497 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 |
| 4f1d1b7d MH |
498 | #elif defined(CONFIG_SDCARD) |
| 499 | /* | |
| 500 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| e222b1f3 PK |
501 | * about 825KB (1650 blocks), Env is stored after the image, and the env size is |
| 502 | * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. | |
| 4f1d1b7d | 503 | */ |
| f2717b47 | 504 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC |
| dcf1d774 | 505 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) |
| 4f1d1b7d | 506 | #elif defined(CONFIG_NAND) |
| f2717b47 | 507 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND |
| dcf1d774 | 508 | #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 461632bd | 509 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| ff65f126 LG |
510 | /* |
| 511 | * Slave has no ucode locally, it can fetch this from remote. When implementing | |
| 512 | * in two corenet boards, slave's ucode could be stored in master's memory | |
| 513 | * space, the address can be mapped from slave TLB->slave LAW-> | |
| 461632bd LG |
514 | * slave SRIO or PCIE outbound window->master inbound window-> |
| 515 | * master LAW->the ucode address in master's memory space. | |
| ff65f126 LG |
516 | */ |
| 517 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE | |
| dcf1d774 | 518 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 |
| 4f1d1b7d | 519 | #else |
| f2717b47 | 520 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR |
| dcf1d774 | 521 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 |
| 4f1d1b7d | 522 | #endif |
| f2717b47 TT |
523 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 |
| 524 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 4f1d1b7d MH |
525 | |
| 526 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 527 | #define CONFIG_FMAN_ENET | |
| 0787ecc0 MH |
528 | #define CONFIG_PHYLIB_10G |
| 529 | #define CONFIG_PHY_VITESSE | |
| 530 | #define CONFIG_PHY_TERANETICS | |
| 4f1d1b7d MH |
531 | #endif |
| 532 | ||
| 533 | #ifdef CONFIG_PCI | |
| 842033e6 | 534 | #define CONFIG_PCI_INDIRECT_BRIDGE |
| 4f1d1b7d MH |
535 | |
| 536 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 537 | #define CONFIG_DOS_PARTITION | |
| 538 | #endif /* CONFIG_PCI */ | |
| 539 | ||
| aa7f281c | 540 | /* SATA */ |
| 9760b274 ZRR |
541 | #define CONFIG_FSL_SATA_V2 |
| 542 | ||
| 543 | #ifdef CONFIG_FSL_SATA_V2 | |
| aa7f281c | 544 | #define CONFIG_FSL_SATA |
| 3e0529f7 | 545 | #define CONFIG_LIBATA |
| aa7f281c MH |
546 | |
| 547 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 548 | #define CONFIG_SATA1 | |
| 549 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 550 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 551 | #define CONFIG_SATA2 | |
| 552 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 553 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 554 | ||
| 555 | #define CONFIG_LBA48 | |
| 556 | #define CONFIG_CMD_SATA | |
| 557 | #define CONFIG_DOS_PARTITION | |
| aa7f281c MH |
558 | #endif |
| 559 | ||
| 4f1d1b7d MH |
560 | #ifdef CONFIG_FMAN_ENET |
| 561 | #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 | |
| 562 | #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 | |
| 563 | #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 | |
| 564 | #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 | |
| 565 | #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 | |
| 566 | ||
| 567 | #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c | |
| 568 | #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d | |
| 569 | #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e | |
| 570 | #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f | |
| 571 | ||
| 0787ecc0 MH |
572 | #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 |
| 573 | ||
| 4f1d1b7d MH |
574 | #define CONFIG_SYS_TBIPA_VALUE 8 |
| 575 | #define CONFIG_MII /* MII PHY management */ | |
| 576 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
| 577 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 578 | #endif | |
| 579 | ||
| 580 | /* | |
| 581 | * Environment | |
| 582 | */ | |
| 583 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 584 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 585 | ||
| 586 | /* | |
| 587 | * Command line configuration. | |
| 588 | */ | |
| 4f1d1b7d | 589 | #define CONFIG_CMD_ERRATA |
| 4f1d1b7d | 590 | #define CONFIG_CMD_IRQ |
| 4f1d1b7d MH |
591 | |
| 592 | #ifdef CONFIG_PCI | |
| 593 | #define CONFIG_CMD_PCI | |
| 4f1d1b7d MH |
594 | #endif |
| 595 | ||
| 596 | /* | |
| 597 | * USB | |
| 598 | */ | |
| 3d7506fa | 599 | #define CONFIG_HAS_FSL_DR_USB |
| 600 | #define CONFIG_HAS_FSL_MPH_USB | |
| 601 | ||
| 602 | #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) | |
| 4f1d1b7d MH |
603 | #define CONFIG_USB_EHCI |
| 604 | #define CONFIG_USB_EHCI_FSL | |
| 605 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 3d7506fa | 606 | #endif |
| 607 | ||
| 4f1d1b7d MH |
608 | #ifdef CONFIG_MMC |
| 609 | #define CONFIG_FSL_ESDHC | |
| 610 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 611 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT | |
| 4f1d1b7d | 612 | #define CONFIG_GENERIC_MMC |
| 4f1d1b7d MH |
613 | #define CONFIG_DOS_PARTITION |
| 614 | #endif | |
| 615 | ||
| 737537ef RG |
616 | /* Hash command with SHA acceleration supported in hardware */ |
| 617 | #ifdef CONFIG_FSL_CAAM | |
| 618 | #define CONFIG_CMD_HASH | |
| 619 | #define CONFIG_SHA_HW_ACCEL | |
| 620 | #endif | |
| 621 | ||
| 4f1d1b7d MH |
622 | /* |
| 623 | * Miscellaneous configurable options | |
| 624 | */ | |
| 625 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 626 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 627 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 628 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 4f1d1b7d MH |
629 | #ifdef CONFIG_CMD_KGDB |
| 630 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 631 | #else | |
| 632 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 633 | #endif | |
| 634 | /* Print Buffer Size */ | |
| 635 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
| 636 | sizeof(CONFIG_SYS_PROMPT)+16) | |
| 637 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 638 | /* Boot Argument Buffer Size */ | |
| 639 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| 4f1d1b7d MH |
640 | |
| 641 | /* | |
| 642 | * For booting Linux, the board info and command line data | |
| 643 | * have to be in the first 64 MB of memory, since this is | |
| 644 | * the maximum mapped by the Linux kernel during initialization. | |
| 645 | */ | |
| 646 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ | |
| 647 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 648 | ||
| 649 | #ifdef CONFIG_CMD_KGDB | |
| 650 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 4f1d1b7d MH |
651 | #endif |
| 652 | ||
| 653 | /* | |
| 654 | * Environment Configuration | |
| 655 | */ | |
| 8b3637c6 | 656 | #define CONFIG_ROOTPATH "/opt/nfsroot" |
| b3f44c21 | 657 | #define CONFIG_BOOTFILE "uImage" |
| 4f1d1b7d MH |
658 | #define CONFIG_UBOOTPATH u-boot.bin |
| 659 | ||
| 660 | /* default location for tftp and bootm */ | |
| 661 | #define CONFIG_LOADADDR 1000000 | |
| 662 | ||
| 4f1d1b7d MH |
663 | |
| 664 | #define CONFIG_BAUDRATE 115200 | |
| 665 | ||
| 666 | #define __USB_PHY_TYPE utmi | |
| 667 | ||
| 668 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 669 | "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ | |
| 670 | "bank_intlv=cs0_cs1\0" \ | |
| 671 | "netdev=eth0\0" \ | |
| 5368c55d MV |
672 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| 673 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 4f1d1b7d MH |
674 | "tftpflash=tftpboot $loadaddr $uboot && " \ |
| 675 | "protect off $ubootaddr +$filesize && " \ | |
| 676 | "erase $ubootaddr +$filesize && " \ | |
| 677 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 678 | "protect on $ubootaddr +$filesize && " \ | |
| 679 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 680 | "consoledev=ttyS0\0" \ | |
| 5368c55d | 681 | "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ |
| 4f1d1b7d MH |
682 | "usb_dr_mode=host\0" \ |
| 683 | "ramdiskaddr=2000000\0" \ | |
| 684 | "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ | |
| b24a4f62 | 685 | "fdtaddr=1e00000\0" \ |
| 4f1d1b7d | 686 | "fdtfile=p2041rdb/p2041rdb.dtb\0" \ |
| 3246584d | 687 | "bdev=sda3\0" |
| 4f1d1b7d MH |
688 | |
| 689 | #define CONFIG_HDBOOT \ | |
| 690 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 691 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 692 | "tftp $loadaddr $bootfile;" \ | |
| 693 | "tftp $fdtaddr $fdtfile;" \ | |
| 694 | "bootm $loadaddr - $fdtaddr" | |
| 695 | ||
| 696 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 697 | "setenv bootargs root=/dev/nfs rw " \ | |
| 698 | "nfsroot=$serverip:$rootpath " \ | |
| 699 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 700 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 701 | "tftp $loadaddr $bootfile;" \ | |
| 702 | "tftp $fdtaddr $fdtfile;" \ | |
| 703 | "bootm $loadaddr - $fdtaddr" | |
| 704 | ||
| 705 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 706 | "setenv bootargs root=/dev/ram rw " \ | |
| 707 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 708 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 709 | "tftp $loadaddr $bootfile;" \ | |
| 710 | "tftp $fdtaddr $fdtfile;" \ | |
| 711 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 712 | ||
| 713 | #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT | |
| 714 | ||
| 4f1d1b7d | 715 | #include <asm/fsl_secure_boot.h> |
| 4f1d1b7d MH |
716 | |
| 717 | #endif /* __CONFIG_H */ |