]>
Commit | Line | Data |
---|---|---|
8d67c368 SL |
1 | /* |
2 | * Copyright 2014 Freescale Semiconductor, Inc. | |
3 | * | |
4 | * SPDX-License-Identifier: GPL-2.0+ | |
5 | */ | |
6 | ||
7 | /* | |
8 | * T2080 RDB/PCIe board configuration file | |
9 | */ | |
10 | ||
11 | #ifndef __T2080RDB_H | |
12 | #define __T2080RDB_H | |
13 | ||
14 | #define CONFIG_T2080RDB | |
15 | #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ | |
16 | #define CONFIG_MMC | |
8d67c368 SL |
17 | #define CONFIG_USB_EHCI |
18 | #define CONFIG_FSL_SATA_V2 | |
19 | ||
20 | /* High Level Configuration Options */ | |
8d67c368 SL |
21 | #define CONFIG_BOOKE |
22 | #define CONFIG_E500 /* BOOKE e500 family */ | |
23 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
24 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
25 | #define CONFIG_MP /* support multiple processors */ | |
26 | #define CONFIG_ENABLE_36BIT_PHYS | |
27 | ||
28 | #ifdef CONFIG_PHYS_64BIT | |
29 | #define CONFIG_ADDR_MAP 1 | |
30 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
31 | #endif | |
32 | ||
33 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
34 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
35 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
737537ef | 36 | #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
8d67c368 SL |
37 | #define CONFIG_FSL_LAW /* Use common FSL init code */ |
38 | #define CONFIG_ENV_OVERWRITE | |
39 | ||
40 | #ifdef CONFIG_RAMBOOT_PBL | |
e4536f8e MY |
41 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg |
42 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg | |
4d666683 | 43 | |
4d666683 SL |
44 | #define CONFIG_SPL_FLUSH_IMAGE |
45 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
4d666683 SL |
46 | #define CONFIG_FSL_LAW /* Use common FSL init code */ |
47 | #define CONFIG_SYS_TEXT_BASE 0x00201000 | |
48 | #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 | |
49 | #define CONFIG_SPL_PAD_TO 0x40000 | |
50 | #define CONFIG_SPL_MAX_SIZE 0x28000 | |
51 | #define RESET_VECTOR_OFFSET 0x27FFC | |
52 | #define BOOT_PAGE_OFFSET 0x27000 | |
53 | #ifdef CONFIG_SPL_BUILD | |
54 | #define CONFIG_SPL_SKIP_RELOCATE | |
55 | #define CONFIG_SPL_COMMON_INIT_DDR | |
56 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE | |
57 | #define CONFIG_SYS_NO_FLASH | |
58 | #endif | |
59 | ||
60 | #ifdef CONFIG_NAND | |
4d666683 SL |
61 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) |
62 | #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 | |
63 | #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 | |
64 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) | |
65 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
66 | #define CONFIG_SPL_NAND_BOOT | |
67 | #endif | |
68 | ||
69 | #ifdef CONFIG_SPIFLASH | |
70 | #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC | |
4d666683 SL |
71 | #define CONFIG_SPL_SPI_FLASH_MINIMAL |
72 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) | |
73 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) | |
74 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) | |
75 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) | |
76 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" | |
77 | #ifndef CONFIG_SPL_BUILD | |
78 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
79 | #endif | |
80 | #define CONFIG_SPL_SPI_BOOT | |
81 | #endif | |
82 | ||
83 | #ifdef CONFIG_SDCARD | |
84 | #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC | |
4d666683 SL |
85 | #define CONFIG_SPL_MMC_MINIMAL |
86 | #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) | |
87 | #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) | |
88 | #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) | |
89 | #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) | |
90 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" | |
91 | #ifndef CONFIG_SPL_BUILD | |
92 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC | |
93 | #endif | |
94 | #define CONFIG_SPL_MMC_BOOT | |
8d67c368 SL |
95 | #endif |
96 | ||
4d666683 SL |
97 | #endif /* CONFIG_RAMBOOT_PBL */ |
98 | ||
8d67c368 SL |
99 | #define CONFIG_SRIO_PCIE_BOOT_MASTER |
100 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE | |
101 | /* Set 1M boot space */ | |
102 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) | |
103 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ | |
104 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) | |
105 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
106 | #define CONFIG_SYS_NO_FLASH | |
107 | #endif | |
108 | ||
109 | #ifndef CONFIG_SYS_TEXT_BASE | |
110 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 | |
111 | #endif | |
112 | ||
113 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
114 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
115 | #endif | |
116 | ||
117 | /* | |
118 | * These can be toggled for performance analysis, otherwise use default. | |
119 | */ | |
120 | #define CONFIG_SYS_CACHE_STASHING | |
121 | #define CONFIG_BTB /* toggle branch predition */ | |
122 | #define CONFIG_DDR_ECC | |
123 | #ifdef CONFIG_DDR_ECC | |
124 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
125 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
126 | #endif | |
127 | ||
4913229e SL |
128 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
129 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
130 | #define CONFIG_SYS_ALT_MEMTEST | |
131 | ||
4d666683 | 132 | #ifndef CONFIG_SYS_NO_FLASH |
8d67c368 SL |
133 | #define CONFIG_FLASH_CFI_DRIVER |
134 | #define CONFIG_SYS_FLASH_CFI | |
135 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
136 | #endif | |
137 | ||
138 | #if defined(CONFIG_SPIFLASH) | |
139 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
140 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
141 | #define CONFIG_ENV_SPI_BUS 0 | |
142 | #define CONFIG_ENV_SPI_CS 0 | |
143 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
144 | #define CONFIG_ENV_SPI_MODE 0 | |
145 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
146 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
147 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
148 | #elif defined(CONFIG_SDCARD) | |
149 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
150 | #define CONFIG_ENV_IS_IN_MMC | |
151 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
152 | #define CONFIG_ENV_SIZE 0x2000 | |
4d666683 | 153 | #define CONFIG_ENV_OFFSET (512 * 0x800) |
8d67c368 SL |
154 | #elif defined(CONFIG_NAND) |
155 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
156 | #define CONFIG_ENV_IS_IN_NAND | |
4d666683 | 157 | #define CONFIG_ENV_SIZE 0x2000 |
8d67c368 SL |
158 | #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) |
159 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) | |
160 | #define CONFIG_ENV_IS_IN_REMOTE | |
161 | #define CONFIG_ENV_ADDR 0xffe20000 | |
162 | #define CONFIG_ENV_SIZE 0x2000 | |
163 | #elif defined(CONFIG_ENV_IS_NOWHERE) | |
164 | #define CONFIG_ENV_SIZE 0x2000 | |
165 | #else | |
166 | #define CONFIG_ENV_IS_IN_FLASH | |
167 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
168 | #define CONFIG_ENV_SIZE 0x2000 | |
169 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
170 | #endif | |
171 | ||
172 | #ifndef __ASSEMBLY__ | |
173 | unsigned long get_board_sys_clk(void); | |
174 | unsigned long get_board_ddr_clk(void); | |
175 | #endif | |
176 | ||
177 | #define CONFIG_SYS_CLK_FREQ 66660000 | |
178 | #define CONFIG_DDR_CLK_FREQ 133330000 | |
179 | ||
180 | /* | |
181 | * Config the L3 Cache as L3 SRAM | |
182 | */ | |
4d666683 SL |
183 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
184 | #define CONFIG_SYS_L3_SIZE (512 << 10) | |
185 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) | |
186 | #ifdef CONFIG_RAMBOOT_PBL | |
187 | #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) | |
188 | #endif | |
189 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) | |
190 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) | |
191 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) | |
192 | #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) | |
8d67c368 SL |
193 | |
194 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
195 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
196 | ||
197 | /* EEPROM */ | |
198 | #define CONFIG_ID_EEPROM | |
199 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
200 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
201 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
ef531c73 | 202 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
8d67c368 SL |
203 | |
204 | /* | |
205 | * DDR Setup | |
206 | */ | |
207 | #define CONFIG_VERY_BIG_RAM | |
208 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
209 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
210 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
211 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
212 | #define CONFIG_DDR_SPD | |
213 | #define CONFIG_SYS_FSL_DDR3 | |
214 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
215 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
216 | #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ | |
217 | #define SPD_EEPROM_ADDRESS1 0x51 | |
218 | #define SPD_EEPROM_ADDRESS2 0x52 | |
219 | #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 | |
220 | #define CTRL_INTLV_PREFERED cacheline | |
221 | ||
222 | /* | |
223 | * IFC Definitions | |
224 | */ | |
225 | #define CONFIG_SYS_FLASH_BASE 0xe8000000 | |
226 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) | |
227 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) | |
228 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
229 | CSPR_PORT_SIZE_16 | \ | |
230 | CSPR_MSEL_NOR | \ | |
231 | CSPR_V) | |
232 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
233 | ||
234 | /* NOR Flash Timing Params */ | |
235 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 | |
236 | ||
237 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
238 | FTIM0_NOR_TEADC(0x5) | \ | |
239 | FTIM0_NOR_TEAHC(0x5)) | |
240 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
241 | FTIM1_NOR_TRAD_NOR(0x1A) |\ | |
242 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
243 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
244 | FTIM2_NOR_TCH(0x4) | \ | |
245 | FTIM2_NOR_TWPH(0x0E) | \ | |
246 | FTIM2_NOR_TWP(0x1c)) | |
247 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
248 | ||
249 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
250 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
251 | ||
252 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
253 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
254 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
255 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
256 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
257 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS } | |
258 | ||
259 | /* CPLD on IFC */ | |
260 | #define CONFIG_SYS_CPLD_BASE 0xffdf0000 | |
261 | #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) | |
262 | #define CONFIG_SYS_CSPR2_EXT (0xf) | |
263 | #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ | |
264 | | CSPR_PORT_SIZE_8 \ | |
265 | | CSPR_MSEL_GPCM \ | |
266 | | CSPR_V) | |
267 | #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) | |
268 | #define CONFIG_SYS_CSOR2 0x0 | |
269 | ||
270 | /* CPLD Timing parameters for IFC CS2 */ | |
271 | #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
272 | FTIM0_GPCM_TEADC(0x0e) | \ | |
273 | FTIM0_GPCM_TEAHC(0x0e)) | |
274 | #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
275 | FTIM1_GPCM_TRAD(0x1f)) | |
276 | #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
de519163 | 277 | FTIM2_GPCM_TCH(0x8) | \ |
8d67c368 SL |
278 | FTIM2_GPCM_TWP(0x1f)) |
279 | #define CONFIG_SYS_CS2_FTIM3 0x0 | |
280 | ||
281 | /* NAND Flash on IFC */ | |
282 | #define CONFIG_NAND_FSL_IFC | |
283 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
284 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) | |
285 | ||
286 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) | |
287 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
288 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
289 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
290 | | CSPR_V) | |
291 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
292 | ||
293 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
294 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
295 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
296 | | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ | |
297 | | CSOR_NAND_PGS_2K /* Page Size = 2K */\ | |
298 | | CSOR_NAND_SPRZ_64 /* Spare size = 64 */\ | |
299 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
300 | ||
301 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
302 | ||
303 | /* ONFI NAND Flash mode0 Timing Params */ | |
304 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ | |
305 | FTIM0_NAND_TWP(0x18) | \ | |
306 | FTIM0_NAND_TWCHT(0x07) | \ | |
307 | FTIM0_NAND_TWH(0x0a)) | |
308 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
309 | FTIM1_NAND_TWBE(0x39) | \ | |
310 | FTIM1_NAND_TRR(0x0e) | \ | |
311 | FTIM1_NAND_TRP(0x18)) | |
312 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ | |
313 | FTIM2_NAND_TREH(0x0a) | \ | |
314 | FTIM2_NAND_TWHRE(0x1e)) | |
315 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
316 | ||
317 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
318 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
319 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
8d67c368 SL |
320 | #define CONFIG_CMD_NAND |
321 | #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) | |
322 | ||
323 | #if defined(CONFIG_NAND) | |
324 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
325 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
326 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
327 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
328 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
329 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
330 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
331 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
332 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
333 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR | |
334 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
335 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
336 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
337 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
338 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
339 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
340 | #else | |
341 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
342 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
343 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
344 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
345 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
346 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
347 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
348 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
349 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT | |
350 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR | |
351 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK | |
352 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR | |
353 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
354 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
355 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
356 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
357 | #endif | |
358 | ||
359 | #if defined(CONFIG_RAMBOOT_PBL) | |
360 | #define CONFIG_SYS_RAMBOOT | |
361 | #endif | |
362 | ||
4d666683 SL |
363 | #ifdef CONFIG_SPL_BUILD |
364 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
365 | #else | |
366 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
367 | #endif | |
368 | ||
8d67c368 SL |
369 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ |
370 | #define CONFIG_MISC_INIT_R | |
371 | #define CONFIG_HWCONFIG | |
372 | ||
373 | /* define to use L1 as initial stack */ | |
374 | #define CONFIG_L1_INIT_RAM | |
375 | #define CONFIG_SYS_INIT_RAM_LOCK | |
376 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
377 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
b3142e2c | 378 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 |
8d67c368 SL |
379 | /* The assembler doesn't like typecast */ |
380 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
381 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
382 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
383 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
384 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
385 | GENERATED_GBL_DATA_SIZE) | |
386 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
9307cbab | 387 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
8d67c368 SL |
388 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
389 | ||
390 | /* | |
391 | * Serial Port | |
392 | */ | |
393 | #define CONFIG_CONS_INDEX 1 | |
8d67c368 SL |
394 | #define CONFIG_SYS_NS16550_SERIAL |
395 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
396 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
397 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
398 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
399 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
400 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
401 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
402 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
403 | ||
8d67c368 SL |
404 | /* |
405 | * I2C | |
406 | */ | |
407 | #define CONFIG_SYS_I2C | |
408 | #define CONFIG_SYS_I2C_FSL | |
409 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
410 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
411 | #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F | |
412 | #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F | |
413 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
414 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 | |
415 | #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 | |
416 | #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 | |
417 | #define CONFIG_SYS_FSL_I2C_SPEED 100000 | |
418 | #define CONFIG_SYS_FSL_I2C2_SPEED 100000 | |
419 | #define CONFIG_SYS_FSL_I2C3_SPEED 100000 | |
420 | #define CONFIG_SYS_FSL_I2C4_SPEED 100000 | |
421 | #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ | |
422 | #define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ | |
423 | #define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */ | |
424 | #define I2C_MUX_CH_DEFAULT 0x8 | |
425 | ||
e5abb92c YZ |
426 | #define I2C_MUX_CH_VOL_MONITOR 0xa |
427 | ||
428 | #define CONFIG_VID_FLS_ENV "t208xrdb_vdd_mv" | |
429 | #ifndef CONFIG_SPL_BUILD | |
430 | #define CONFIG_VID | |
431 | #endif | |
432 | #define CONFIG_VOL_MONITOR_IR36021_SET | |
433 | #define CONFIG_VOL_MONITOR_IR36021_READ | |
434 | /* The lowest and highest voltage allowed for T208xRDB */ | |
435 | #define VDD_MV_MIN 819 | |
436 | #define VDD_MV_MAX 1212 | |
8d67c368 SL |
437 | |
438 | /* | |
439 | * RapidIO | |
440 | */ | |
441 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
442 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
443 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ | |
444 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
445 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull | |
446 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ | |
447 | /* | |
448 | * for slave u-boot IMAGE instored in master memory space, | |
449 | * PHYS must be aligned based on the SIZE | |
450 | */ | |
e4911815 LG |
451 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull |
452 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull | |
453 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ | |
454 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull | |
8d67c368 SL |
455 | /* |
456 | * for slave UCODE and ENV instored in master memory space, | |
457 | * PHYS must be aligned based on the SIZE | |
458 | */ | |
e4911815 | 459 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull |
8d67c368 SL |
460 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull |
461 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ | |
462 | ||
463 | /* slave core release by master*/ | |
464 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 | |
465 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ | |
466 | ||
467 | /* | |
468 | * SRIO_PCIE_BOOT - SLAVE | |
469 | */ | |
470 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE | |
471 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 | |
472 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ | |
473 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) | |
474 | #endif | |
475 | ||
476 | /* | |
477 | * eSPI - Enhanced SPI | |
478 | */ | |
479 | #ifdef CONFIG_SPI_FLASH | |
8d67c368 | 480 | #define CONFIG_SPI_FLASH_BAR |
8d67c368 SL |
481 | #define CONFIG_SF_DEFAULT_SPEED 10000000 |
482 | #define CONFIG_SF_DEFAULT_MODE 0 | |
483 | #endif | |
484 | ||
485 | /* | |
486 | * General PCI | |
487 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
488 | */ | |
489 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
b38eaec5 RD |
490 | #define CONFIG_PCIE1 /* PCIE controller 1 */ |
491 | #define CONFIG_PCIE2 /* PCIE controller 2 */ | |
492 | #define CONFIG_PCIE3 /* PCIE controller 3 */ | |
493 | #define CONFIG_PCIE4 /* PCIE controller 4 */ | |
8d67c368 SL |
494 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
495 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
496 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
497 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
498 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
499 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
500 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
501 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
502 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
503 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
504 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
505 | ||
506 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
507 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
508 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
509 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
510 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ | |
511 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
512 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
513 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
514 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
515 | ||
516 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
517 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 | |
518 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
519 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc30000000ull | |
520 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ | |
521 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
522 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
523 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
524 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
525 | ||
526 | /* controller 4, Base address 203000 */ | |
527 | #define CONFIG_SYS_PCIE4_MEM_VIRT 0xc0000000 | |
528 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
529 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull | |
530 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ | |
531 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 | |
532 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull | |
533 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ | |
534 | ||
535 | #ifdef CONFIG_PCI | |
536 | #define CONFIG_PCI_INDIRECT_BRIDGE | |
537 | #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata LSZ ADD */ | |
8d67c368 SL |
538 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
539 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
540 | #define CONFIG_DOS_PARTITION | |
541 | #endif | |
542 | ||
543 | /* Qman/Bman */ | |
544 | #ifndef CONFIG_NOBQFMAN | |
545 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
546 | #define CONFIG_SYS_BMAN_NUM_PORTALS 18 | |
547 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
548 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
549 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 | |
3fa66db4 JL |
550 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
551 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
552 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
553 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
554 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
555 | CONFIG_SYS_BMAN_CENA_SIZE) | |
556 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
557 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
8d67c368 SL |
558 | #define CONFIG_SYS_QMAN_NUM_PORTALS 18 |
559 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 | |
560 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull | |
561 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 | |
3fa66db4 JL |
562 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
563 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
564 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
565 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
566 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
567 | CONFIG_SYS_QMAN_CENA_SIZE) | |
568 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
569 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
8d67c368 SL |
570 | |
571 | #define CONFIG_SYS_DPAA_FMAN | |
572 | #define CONFIG_SYS_DPAA_PME | |
573 | #define CONFIG_SYS_PMAN | |
574 | #define CONFIG_SYS_DPAA_DCE | |
575 | #define CONFIG_SYS_DPAA_RMAN /* RMan */ | |
576 | #define CONFIG_SYS_INTERLAKEN | |
577 | ||
578 | /* Default address of microcode for the Linux Fman driver */ | |
579 | #if defined(CONFIG_SPIFLASH) | |
580 | /* | |
581 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
582 | * env, so we got 0x110000. | |
583 | */ | |
584 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH | |
ef531c73 SL |
585 | #define CONFIG_SYS_CORTINA_FW_IN_SPIFLASH |
586 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 | |
8d67c368 SL |
587 | #define CONFIG_CORTINA_FW_ADDR 0x120000 |
588 | ||
589 | #elif defined(CONFIG_SDCARD) | |
590 | /* | |
591 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
4d666683 SL |
592 | * about 1MB (2048 blocks), Env is stored after the image, and the env size is |
593 | * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. | |
8d67c368 SL |
594 | */ |
595 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
ef531c73 | 596 | #define CONFIG_SYS_CORTINA_FW_IN_MMC |
4d666683 SL |
597 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) |
598 | #define CONFIG_CORTINA_FW_ADDR (512 * 0x8a0) | |
8d67c368 SL |
599 | |
600 | #elif defined(CONFIG_NAND) | |
601 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND | |
ef531c73 | 602 | #define CONFIG_SYS_CORTINA_FW_IN_NAND |
4d666683 SL |
603 | #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) |
604 | #define CONFIG_CORTINA_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
8d67c368 SL |
605 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
606 | /* | |
607 | * Slave has no ucode locally, it can fetch this from remote. When implementing | |
608 | * in two corenet boards, slave's ucode could be stored in master's memory | |
609 | * space, the address can be mapped from slave TLB->slave LAW-> | |
610 | * slave SRIO or PCIE outbound window->master inbound window-> | |
611 | * master LAW->the ucode address in master's memory space. | |
612 | */ | |
613 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE | |
ef531c73 SL |
614 | #define CONFIG_SYS_CORTINA_FW_IN_REMOTE |
615 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 | |
8d67c368 SL |
616 | #define CONFIG_CORTINA_FW_ADDR 0xFFE10000 |
617 | #else | |
618 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
ef531c73 SL |
619 | #define CONFIG_SYS_CORTINA_FW_IN_NOR |
620 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 | |
8d67c368 SL |
621 | #define CONFIG_CORTINA_FW_ADDR 0xEFE00000 |
622 | #endif | |
623 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 | |
624 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
625 | #endif /* CONFIG_NOBQFMAN */ | |
626 | ||
627 | #ifdef CONFIG_SYS_DPAA_FMAN | |
628 | #define CONFIG_FMAN_ENET | |
629 | #define CONFIG_PHYLIB_10G | |
747aedaf | 630 | #define CONFIG_PHY_AQUANTIA |
8d67c368 | 631 | #define CONFIG_PHY_CORTINA |
8d67c368 SL |
632 | #define CONFIG_PHY_REALTEK |
633 | #define CONFIG_CORTINA_FW_LENGTH 0x40000 | |
634 | #define RGMII_PHY1_ADDR 0x01 /* RealTek RTL8211E */ | |
635 | #define RGMII_PHY2_ADDR 0x02 | |
636 | #define CORTINA_PHY_ADDR1 0x0c /* Cortina CS4315 */ | |
637 | #define CORTINA_PHY_ADDR2 0x0d | |
638 | #define FM1_10GEC3_PHY_ADDR 0x00 /* Aquantia AQ1202 10G Base-T */ | |
639 | #define FM1_10GEC4_PHY_ADDR 0x01 | |
640 | #endif | |
641 | ||
8d67c368 SL |
642 | #ifdef CONFIG_FMAN_ENET |
643 | #define CONFIG_MII /* MII PHY management */ | |
644 | #define CONFIG_ETHPRIME "FM1@DTSEC3" | |
645 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
646 | #endif | |
647 | ||
648 | /* | |
649 | * SATA | |
650 | */ | |
651 | #ifdef CONFIG_FSL_SATA_V2 | |
652 | #define CONFIG_LIBATA | |
653 | #define CONFIG_FSL_SATA | |
654 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
655 | #define CONFIG_SATA1 | |
656 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
657 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
658 | #define CONFIG_SATA2 | |
659 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
660 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
661 | #define CONFIG_LBA48 | |
662 | #define CONFIG_CMD_SATA | |
663 | #define CONFIG_DOS_PARTITION | |
8d67c368 SL |
664 | #endif |
665 | ||
666 | /* | |
667 | * USB | |
668 | */ | |
669 | #ifdef CONFIG_USB_EHCI | |
8d67c368 SL |
670 | #define CONFIG_USB_EHCI_FSL |
671 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
8d67c368 SL |
672 | #define CONFIG_HAS_FSL_DR_USB |
673 | #endif | |
674 | ||
675 | /* | |
676 | * SDHC | |
677 | */ | |
678 | #ifdef CONFIG_MMC | |
8d67c368 SL |
679 | #define CONFIG_FSL_ESDHC |
680 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
681 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT | |
682 | #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 | |
683 | #define CONFIG_GENERIC_MMC | |
8d67c368 SL |
684 | #define CONFIG_DOS_PARTITION |
685 | #endif | |
686 | ||
4feac1c6 SL |
687 | /* |
688 | * Dynamic MTD Partition support with mtdparts | |
689 | */ | |
690 | #ifndef CONFIG_SYS_NO_FLASH | |
691 | #define CONFIG_MTD_DEVICE | |
692 | #define CONFIG_MTD_PARTITIONS | |
693 | #define CONFIG_CMD_MTDPARTS | |
694 | #define CONFIG_FLASH_CFI_MTD | |
695 | #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ | |
696 | "spi0=spife110000.1" | |
697 | #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ | |
698 | "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ | |
699 | "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:" \ | |
700 | "1m(uboot),5m(kernel),128k(dtb),-(user)" | |
701 | #endif | |
702 | ||
8d67c368 SL |
703 | /* |
704 | * Environment | |
705 | */ | |
706 | ||
707 | /* | |
708 | * Command line configuration. | |
709 | */ | |
c665c473 | 710 | #define CONFIG_CMD_ERRATA |
8d67c368 | 711 | #define CONFIG_CMD_REGINFO |
8d67c368 SL |
712 | |
713 | #ifdef CONFIG_PCI | |
714 | #define CONFIG_CMD_PCI | |
8d67c368 SL |
715 | #endif |
716 | ||
737537ef RG |
717 | /* Hash command with SHA acceleration supported in hardware */ |
718 | #ifdef CONFIG_FSL_CAAM | |
719 | #define CONFIG_CMD_HASH | |
720 | #define CONFIG_SHA_HW_ACCEL | |
721 | #endif | |
722 | ||
8d67c368 SL |
723 | /* |
724 | * Miscellaneous configurable options | |
725 | */ | |
726 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
727 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
728 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
729 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
8d67c368 SL |
730 | #ifdef CONFIG_CMD_KGDB |
731 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
732 | #else | |
733 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
734 | #endif | |
735 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
736 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
737 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
8d67c368 SL |
738 | |
739 | /* | |
740 | * For booting Linux, the board info and command line data | |
741 | * have to be in the first 64 MB of memory, since this is | |
742 | * the maximum mapped by the Linux kernel during initialization. | |
743 | */ | |
744 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
745 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
746 | ||
747 | #ifdef CONFIG_CMD_KGDB | |
748 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
749 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
750 | #endif | |
751 | ||
752 | /* | |
753 | * Environment Configuration | |
754 | */ | |
755 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
756 | #define CONFIG_BOOTFILE "uImage" | |
757 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ | |
758 | ||
759 | /* default location for tftp and bootm */ | |
760 | #define CONFIG_LOADADDR 1000000 | |
761 | #define CONFIG_BAUDRATE 115200 | |
8d67c368 SL |
762 | #define __USB_PHY_TYPE utmi |
763 | ||
764 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
765 | "hwconfig=fsl_ddr:" \ | |
766 | "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ | |
767 | "bank_intlv=auto;" \ | |
768 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ | |
769 | "netdev=eth0\0" \ | |
770 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
771 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
772 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
773 | "protect off $ubootaddr +$filesize && " \ | |
774 | "erase $ubootaddr +$filesize && " \ | |
775 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
776 | "protect on $ubootaddr +$filesize && " \ | |
777 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
778 | "consoledev=ttyS0\0" \ | |
779 | "ramdiskaddr=2000000\0" \ | |
780 | "ramdiskfile=t2080rdb/ramdisk.uboot\0" \ | |
b24a4f62 | 781 | "fdtaddr=1e00000\0" \ |
8d67c368 | 782 | "fdtfile=t2080rdb/t2080rdb.dtb\0" \ |
3246584d | 783 | "bdev=sda3\0" |
8d67c368 SL |
784 | |
785 | /* | |
786 | * For emulation this causes u-boot to jump to the start of the | |
787 | * proof point app code automatically | |
788 | */ | |
789 | #define CONFIG_PROOF_POINTS \ | |
790 | "setenv bootargs root=/dev/$bdev rw " \ | |
791 | "console=$consoledev,$baudrate $othbootargs;" \ | |
792 | "cpu 1 release 0x29000000 - - -;" \ | |
793 | "cpu 2 release 0x29000000 - - -;" \ | |
794 | "cpu 3 release 0x29000000 - - -;" \ | |
795 | "cpu 4 release 0x29000000 - - -;" \ | |
796 | "cpu 5 release 0x29000000 - - -;" \ | |
797 | "cpu 6 release 0x29000000 - - -;" \ | |
798 | "cpu 7 release 0x29000000 - - -;" \ | |
799 | "go 0x29000000" | |
800 | ||
801 | #define CONFIG_HVBOOT \ | |
802 | "setenv bootargs config-addr=0x60000000; " \ | |
803 | "bootm 0x01000000 - 0x00f00000" | |
804 | ||
805 | #define CONFIG_ALU \ | |
806 | "setenv bootargs root=/dev/$bdev rw " \ | |
807 | "console=$consoledev,$baudrate $othbootargs;" \ | |
808 | "cpu 1 release 0x01000000 - - -;" \ | |
809 | "cpu 2 release 0x01000000 - - -;" \ | |
810 | "cpu 3 release 0x01000000 - - -;" \ | |
811 | "cpu 4 release 0x01000000 - - -;" \ | |
812 | "cpu 5 release 0x01000000 - - -;" \ | |
813 | "cpu 6 release 0x01000000 - - -;" \ | |
814 | "cpu 7 release 0x01000000 - - -;" \ | |
815 | "go 0x01000000" | |
816 | ||
817 | #define CONFIG_LINUX \ | |
818 | "setenv bootargs root=/dev/ram rw " \ | |
819 | "console=$consoledev,$baudrate $othbootargs;" \ | |
820 | "setenv ramdiskaddr 0x02000000;" \ | |
821 | "setenv fdtaddr 0x00c00000;" \ | |
822 | "setenv loadaddr 0x1000000;" \ | |
823 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
824 | ||
825 | #define CONFIG_HDBOOT \ | |
826 | "setenv bootargs root=/dev/$bdev rw " \ | |
827 | "console=$consoledev,$baudrate $othbootargs;" \ | |
828 | "tftp $loadaddr $bootfile;" \ | |
829 | "tftp $fdtaddr $fdtfile;" \ | |
830 | "bootm $loadaddr - $fdtaddr" | |
831 | ||
832 | #define CONFIG_NFSBOOTCOMMAND \ | |
833 | "setenv bootargs root=/dev/nfs rw " \ | |
834 | "nfsroot=$serverip:$rootpath " \ | |
835 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
836 | "console=$consoledev,$baudrate $othbootargs;" \ | |
837 | "tftp $loadaddr $bootfile;" \ | |
838 | "tftp $fdtaddr $fdtfile;" \ | |
839 | "bootm $loadaddr - $fdtaddr" | |
840 | ||
841 | #define CONFIG_RAMBOOTCOMMAND \ | |
842 | "setenv bootargs root=/dev/ram rw " \ | |
843 | "console=$consoledev,$baudrate $othbootargs;" \ | |
844 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
845 | "tftp $loadaddr $bootfile;" \ | |
846 | "tftp $fdtaddr $fdtfile;" \ | |
847 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
848 | ||
849 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX | |
850 | ||
8d67c368 | 851 | #include <asm/fsl_secure_boot.h> |
ef6c55a2 | 852 | |
8d67c368 | 853 | #endif /* __T2080RDB_H */ |