[people/ms/u-boot.git] / include / configs / TQM862M.h

/*
 * (C) Copyright 2000-2005
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC860		1
#define CONFIG_MPC860T		1
#define CONFIG_MPC862		1

#define CONFIG_TQM862M		1	/* ...on a TQM8xxM module	*/

#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
#undef	CONFIG_8xx_CONS_SMC2
#undef	CONFIG_8xx_CONS_NONE

#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/

#define	CONFIG_BOOTCOUNT_LIMIT

#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/

#define CONFIG_BOARD_TYPES	1	/* support board types		*/

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"flash_nfs=run nfsargs addip;"					\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip;"					\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
	"rootpath=/opt/eldk/ppc_8xx\0"					\
	"hostname=TQM862M\0"						\
	"bootfile=TQM862M/uImage\0"					\
	"fdt_addr=40080000\0"						\
	"kernel_addr=400A0000\0"					\
	"ramdisk_addr=40280000\0"					\
	"u-boot=TQM862M/u-image.bin\0"					\
	"load=tftp 200000 ${u-boot}\0"					\
	"update=prot off 40000000 +${filesize};"			\
		"era 40000000 +${filesize};"				\
		"cp.b 200000 40000000 ${filesize};"			\
		"sete filesize;save\0"					\
	""
#define CONFIG_BOOTCOMMAND	"run flash_self"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/

#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE


#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IDE
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP


#define CONFIG_NETCONSOLE


/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP			/* undef to save memory		*/
#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
#ifdef	CFG_HUSH_PARSER
#define	CFG_PROMPT_HUSH_PS2	"> "
#endif

#if defined(CONFIG_CMD_KGDB)
#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
#else
#define	CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
#endif
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS		16	/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/

#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks	*/

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CFG_IMMR		0xFFF00000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define	CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE		0x40000000
#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#define CFG_MONITOR_BASE	CFG_FLASH_BASE
#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */

/* use CFI flash driver */
#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE	1
#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */

#define	CFG_ENV_IS_IN_FLASH	1
#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment		*/
#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/

/* Address and size of Redundant Environment Sector	*/
#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)

#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */

/*-----------------------------------------------------------------------
 * Dynamic MTD partition support
 */
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"

#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
						"128k(dtb),"		\
						"1920k(kernel),"	\
						"5632(rootfs),"		\
						"4m(data)"

/*-----------------------------------------------------------------------
 * Hardware Information Block
 */
#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#ifndef	CONFIG_CAN_DRIVER
#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
#else	/* we must activate GPL5 in the SIUMCR for CAN */
#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
#endif	/* CONFIG_CAN_DRIVER */

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CFG_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 */
#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11
#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
			 SCCR_DFALCD00)

/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 *
 */
#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )

/*-----------------------------------------------------------------------
 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 *-----------------------------------------------------------------------
 */

#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/

#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/

#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/

#define CFG_ATA_IDE0_OFFSET	0x0000

#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR

/* Offset for data I/O			*/
#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)

/* Offset for normal register accesses	*/
#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)

/* Offset for alternate registers	*/
#define CFG_ATA_ALT_OFFSET	0x0100

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
#define CFG_DER	0

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #1	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */

/*
 * FLASH timing:
 */
#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
				 OR_SCY_3_CLK | OR_EHTR | OR_BI)

#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )

#define CFG_OR1_REMAP	CFG_OR0_REMAP
#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )

/*
 * BR2/3 and OR2/3 (SDRAM)
 *
 */
#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/

/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
#define CFG_OR_TIMING_SDRAM	0x00000A00

#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

#ifndef	CONFIG_CAN_DRIVER
#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
#else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
#define	CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
					BR_PS_8 | BR_MS_UPMB | BR_V )
#endif	/* CONFIG_CAN_DRIVER */

/*
 * Memory Periodic Timer Prescaler
 *
 * The Divider for PTA (refresh timer) configuration is based on an
 * example SDRAM configuration (64 MBit, one bank). The adjustment to
 * the number of chip selects (NCS) and the actually needed refresh
 * rate is done by setting MPTPR.
 *
 * PTA is calculated from
 *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 *
 *	gclk	  CPU clock (not bus clock!)
 *	Trefresh  Refresh cycle * 4 (four word bursts used)
 *
 * 4096  Rows from SDRAM example configuration
 * 1000  factor s -> ms
 *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 *    4  Number of refresh cycles per period
 *   64  Refresh cycle in ms per number of rows
 * --------------------------------------------
 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 *
 *  50 MHz =>  50.000.000 / Divider =  98
 *  66 Mhz =>  66.000.000 / Divider = 129
 *  80 Mhz =>  80.000.000 / Divider = 156
 * 100 Mhz => 100.000.000 / Divider = 195
 */

#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
#define CFG_MAMR_PTA	98

/*
 * For 16 MBit, refresh rates could be 31.3 us
 * (= 64 ms / 2K = 125 / quad bursts).
 * For a simpler initialization, 15.6 us is used instead.
 *
 * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
 * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
 */
#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

/* 8 column SDRAM */
#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
/* 9 column SDRAM */
#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#define CONFIG_NET_MULTI
#define CONFIG_SCC1_ENET
#define CONFIG_FEC_ENET
#define CONFIG_ETHPRIME		"SCC ETHERNET"

#endif	/* __CONFIG_H */
Commit	Line	Data
71f95118	1	/*
414eec35	2	* (C) Copyright 2000-2005
71f95118 WD	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_MPC860 1
	37	#define CONFIG_MPC860T 1
	38	#define CONFIG_MPC862 1
	39
	40	#define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */
	41
	42	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
	43	#undef CONFIG_8xx_CONS_SMC2
	44	#undef CONFIG_8xx_CONS_NONE
	45
	46	#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
	47
ae3af05e	48	#define CONFIG_BOOTCOUNT_LIMIT
71f95118	49
ae3af05e	50	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
71f95118 WD	51
	52	#define CONFIG_BOARD_TYPES 1 /* support board types */
	53
	54	#define CONFIG_PREBOOT "echo;" \
32bf3d14	55	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
71f95118 WD	56	"echo"
	57
	58	#undef CONFIG_BOOTARGS
	59
	60	#define CONFIG_EXTRA_ENV_SETTINGS \
	61	"netdev=eth0\0" \
	62	"nfsargs=setenv bootargs root=/dev/nfs rw " \
fe126d8b	63	"nfsroot=${serverip}:${rootpath}\0" \
71f95118	64	"ramargs=setenv bootargs root=/dev/ram rw\0" \
fe126d8b WD	65	"addip=setenv bootargs ${bootargs} " \
	66	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	67	":${hostname}:${netdev}:off panic=1\0" \
71f95118	68	"flash_nfs=run nfsargs addip;" \
fe126d8b	69	"bootm ${kernel_addr}\0" \
71f95118	70	"flash_self=run ramargs addip;" \
fe126d8b WD	71	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
fe126d8b WD	72	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
71f95118	73	"rootpath=/opt/eldk/ppc_8xx\0" \
29f8f58f WD	74	"hostname=TQM862M\0" \
29f8f58f WD	75	"bootfile=TQM862M/uImage\0" \
eb6da805 WD	76	"fdt_addr=40080000\0" \
	77	"kernel_addr=400A0000\0" \
	78	"ramdisk_addr=40280000\0" \
29f8f58f WD	79	"u-boot=TQM862M/u-image.bin\0" \
	80	"load=tftp 200000 ${u-boot}\0" \
	81	"update=prot off 40000000 +${filesize};" \
	82	"era 40000000 +${filesize};" \
	83	"cp.b 200000 40000000 ${filesize};" \
	84	"sete filesize;save\0" \
71f95118 WD	85	""
	86	#define CONFIG_BOOTCOMMAND "run flash_self"
	87
	88	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	89	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
	90
	91	#undef CONFIG_WATCHDOG /* watchdog disabled */
	92
	93	#define CONFIG_STATUS_LED 1 /* Status LED enabled */
	94
	95	#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
	96
37d4bb70 JL	97	/*
	98	* BOOTP options
	99	*/
	100	#define CONFIG_BOOTP_SUBNETMASK
	101	#define CONFIG_BOOTP_GATEWAY
	102	#define CONFIG_BOOTP_HOSTNAME
	103	#define CONFIG_BOOTP_BOOTPATH
	104	#define CONFIG_BOOTP_BOOTFILESIZE
	105
71f95118 WD	106
	107	#define CONFIG_MAC_PARTITION
	108	#define CONFIG_DOS_PARTITION
	109
	110	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	111
71f95118	112
2694690e JL	113	/*
	114	* Command line configuration.
	115	*/
	116	#include <config_cmd_default.h>
	117
	118	#define CONFIG_CMD_ASKENV
	119	#define CONFIG_CMD_DATE
	120	#define CONFIG_CMD_DHCP
29f8f58f	121	#define CONFIG_CMD_ELF
2694690e	122	#define CONFIG_CMD_IDE
29f8f58f	123	#define CONFIG_CMD_JFFS2
2694690e JL	124	#define CONFIG_CMD_NFS
	125	#define CONFIG_CMD_SNTP
	126
71f95118	127
29f8f58f WD	128	#define CONFIG_NETCONSOLE
	129
	130
71f95118 WD	131	/*
	132	* Miscellaneous configurable options
	133	*/
	134	#define CFG_LONGHELP /* undef to save memory */
	135	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	136
2751a95a WD	137	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
2751a95a WD	138	#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
71f95118 WD	139	#ifdef CFG_HUSH_PARSER
	140	#define CFG_PROMPT_HUSH_PS2 "> "
	141	#endif
	142
2694690e	143	#if defined(CONFIG_CMD_KGDB)
71f95118 WD	144	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	145	#else
	146	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	147	#endif
	148	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	149	#define CFG_MAXARGS 16 /* max number of command args */
	150	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	151
	152	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	153	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
	154
	155	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	156
	157	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	158
	159	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	160
	161	/*
	162	* Low Level Configuration Settings
	163	* (address mappings, register initial values, etc.)
	164	* You should know what you are doing if you make changes here.
	165	*/
	166	/*-----------------------------------------------------------------------
	167	* Internal Memory Mapped Register
	168	*/
	169	#define CFG_IMMR 0xFFF00000
	170
	171	/*-----------------------------------------------------------------------
	172	* Definitions for initial stack pointer and data area (in DPRAM)
	173	*/
	174	#define CFG_INIT_RAM_ADDR CFG_IMMR
	175	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	176	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	177	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	178	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	179
	180	/*-----------------------------------------------------------------------
	181	* Start addresses for the final memory configuration
	182	* (Set up by the startup code)
	183	* Please note that CFG_SDRAM_BASE _must_ start at 0
	184	*/
	185	#define CFG_SDRAM_BASE 0x00000000
	186	#define CFG_FLASH_BASE 0x40000000
	187	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	188	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	189	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	190
	191	/*
	192	* For booting Linux, the board info and command line data
	193	* have to be in the first 8 MB of memory, since this is
	194	* the maximum mapped by the Linux kernel during initialization.
	195	*/
	196	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	197
	198	/*-----------------------------------------------------------------------
	199	* FLASH organization
	200	*/
71f95118	201
e318d9e9 MK	202	/* use CFI flash driver */
e318d9e9 MK	203	#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
00b1883a	204	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
e318d9e9 MK	205	#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
	206	#define CFG_FLASH_EMPTY_INFO
	207	#define CFG_FLASH_USE_BUFFER_WRITE 1
	208	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	209	#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
71f95118 WD	210
71f95118 WD	211	#define CFG_ENV_IS_IN_FLASH 1
71f95118	212	#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
e318d9e9	213	#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment */
71f95118 WD	214	#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
	215
	216	/* Address and size of Redundant Environment Sector */
	217	#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
	218	#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
	219
67c31036 WD	220	#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
67c31036 WD	221
29f8f58f WD	222	/*-----------------------------------------------------------------------
	223	* Dynamic MTD partition support
	224	*/
	225	#define CONFIG_JFFS2_CMDLINE
	226	#define MTDIDS_DEFAULT "nor0=TQM8xxM-0"
	227
	228	#define MTDPARTS_DEFAULT "mtdparts=TQM8xxM-0:512k(u-boot)," \
	229	"128k(dtb)," \
	230	"1920k(kernel)," \
	231	"5632(rootfs)," \
cd82919e	232	"4m(data)"
29f8f58f	233
71f95118 WD	234	/*-----------------------------------------------------------------------
	235	* Hardware Information Block
	236	*/
	237	#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
	238	#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
	239	#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
	240
	241	/*-----------------------------------------------------------------------
	242	* Cache Configuration
	243	*/
	244	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
2694690e	245	#if defined(CONFIG_CMD_KGDB)
71f95118 WD	246	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	247	#endif
	248
	249	/*-----------------------------------------------------------------------
	250	* SYPCR - System Protection Control 11-9
	251	* SYPCR can only be written once after reset!
	252	*-----------------------------------------------------------------------
	253	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	254	*/
	255	#if defined(CONFIG_WATCHDOG)
	256	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	257	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	258	#else
	259	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
	260	#endif
	261
	262	/*-----------------------------------------------------------------------
	263	* SIUMCR - SIU Module Configuration 11-6
	264	*-----------------------------------------------------------------------
	265	* PCMCIA config., multi-function pin tri-state
	266	*/
	267	#ifndef CONFIG_CAN_DRIVER
	268	#define CFG_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
	269	#else /* we must activate GPL5 in the SIUMCR for CAN */
	270	#define CFG_SIUMCR (SIUMCR_DBGC11 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
	271	#endif /* CONFIG_CAN_DRIVER */
	272
	273	/*-----------------------------------------------------------------------
	274	* TBSCR - Time Base Status and Control 11-26
	275	*-----------------------------------------------------------------------
	276	* Clear Reference Interrupt Status, Timebase freezing enabled
	277	*/
	278	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
	279
	280	/*-----------------------------------------------------------------------
	281	* RTCSC - Real-Time Clock Status and Control Register 11-27
	282	*-----------------------------------------------------------------------
	283	*/
	284	#define CFG_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)
	285
	286	/*-----------------------------------------------------------------------
	287	* PISCR - Periodic Interrupt Status and Control 11-31
	288	*-----------------------------------------------------------------------
	289	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	290	*/
	291	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)
	292
	293	/*-----------------------------------------------------------------------
	294	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	295	*-----------------------------------------------------------------------
	296	* Reset PLL lock status sticky bit, timer expired status bit and timer
	297	* interrupt status bit
71f95118	298	*/
71f95118	299	#define CFG_PLPRCR (PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)
71f95118 WD	300
	301	/*-----------------------------------------------------------------------
	302	* SCCR - System Clock and reset Control Register 15-27
	303	*-----------------------------------------------------------------------
	304	* Set clock output, timebase and RTC source and divider,
	305	* power management and some other internal clocks
	306	*/
	307	#define SCCR_MASK SCCR_EBDF11
e9132ea9	308	#define CFG_SCCR (SCCR_COM00 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
71f95118 WD	309	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD000 \| \
71f95118 WD	310	SCCR_DFALCD00)
71f95118 WD	311
	312	/*-----------------------------------------------------------------------
	313	* PCMCIA stuff
	314	*-----------------------------------------------------------------------
	315	*
	316	*/
	317	#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
	318	#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
	319	#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
	320	#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
	321	#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
	322	#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
	323	#define CFG_PCMCIA_IO_ADDR (0xEC000000)
	324	#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
	325
	326	/*-----------------------------------------------------------------------
	327	* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
	328	*-----------------------------------------------------------------------
	329	*/
	330
	331	#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
	332
	333	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	334	#undef CONFIG_IDE_LED /* LED for ide not supported */
	335	#undef CONFIG_IDE_RESET /* reset for ide not supported */
	336
	337	#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
	338	#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
	339
	340	#define CFG_ATA_IDE0_OFFSET 0x0000
	341
	342	#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
	343
	344	/* Offset for data I/O */
	345	#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
	346
	347	/* Offset for normal register accesses */
	348	#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
	349
	350	/* Offset for alternate registers */
	351	#define CFG_ATA_ALT_OFFSET 0x0100
	352
	353	/*-----------------------------------------------------------------------
	354	*
	355	*-----------------------------------------------------------------------
	356	*
	357	*/
	358	#define CFG_DER 0
	359
	360	/*
	361	* Init Memory Controller:
	362	*
	363	* BR0/1 and OR0/1 (FLASH)
	364	*/
	365
	366	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
	367	#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
	368
	369	/* used to re-map FLASH both when starting from SRAM or FLASH:
	370	* restrict access enough to keep SRAM working (if any)
	371	* but not too much to meddle with FLASH accesses
	372	*/
	373	#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
	374	#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
375
376	/*
377	* FLASH timing:
378	*/
71f95118 WD	379	#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 \| OR_TRLX \| OR_CSNT_SAM \| \
71f95118 WD	380	OR_SCY_3_CLK \| OR_EHTR \| OR_BI)
71f95118 WD	381
	382	#define CFG_OR0_REMAP (CFG_REMAP_OR_AM \| CFG_OR_TIMING_FLASH)
	383	#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_FLASH)
	384	#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )
	385
	386	#define CFG_OR1_REMAP CFG_OR0_REMAP
	387	#define CFG_OR1_PRELIM CFG_OR0_PRELIM
	388	#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_V )
	389
	390	/*
	391	* BR2/3 and OR2/3 (SDRAM)
	392	*
	393	*/
	394	#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
	395	#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
	396	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
	397
	398	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
	399	#define CFG_OR_TIMING_SDRAM 0x00000A00
	400
	401	#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_SDRAM )
	402	#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	403
	404	#ifndef CONFIG_CAN_DRIVER
	405	#define CFG_OR3_PRELIM CFG_OR2_PRELIM
	406	#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	407	#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
	408	#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
	409	#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
	410	#define CFG_OR3_CAN (CFG_CAN_OR_AM \| OR_G5LA \| OR_BI)
	411	#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) \| \
	412	BR_PS_8 \| BR_MS_UPMB \| BR_V )
	413	#endif /* CONFIG_CAN_DRIVER */
	414
	415	/*
	416	* Memory Periodic Timer Prescaler
	417	*
	418	* The Divider for PTA (refresh timer) configuration is based on an
	419	* example SDRAM configuration (64 MBit, one bank). The adjustment to
	420	* the number of chip selects (NCS) and the actually needed refresh
	421	* rate is done by setting MPTPR.
	422	*
	423	* PTA is calculated from
	424	* PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
	425	*
	426	* gclk CPU clock (not bus clock!)
	427	* Trefresh Refresh cycle * 4 (four word bursts used)
	428	*
	429	* 4096 Rows from SDRAM example configuration
	430	* 1000 factor s -> ms
	431	* 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
	432	* 4 Number of refresh cycles per period
	433	* 64 Refresh cycle in ms per number of rows
	434	* --------------------------------------------
	435	* Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
	436	*
	437	* 50 MHz => 50.000.000 / Divider = 98
	438	* 66 Mhz => 66.000.000 / Divider = 129
	439	* 80 Mhz => 80.000.000 / Divider = 156
	440	* 100 Mhz => 100.000.000 / Divider = 195
	441	*/
e9132ea9 WD	442
	443	#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
	444	#define CFG_MAMR_PTA 98
71f95118 WD	445
	446	/*
	447	* For 16 MBit, refresh rates could be 31.3 us
	448	* (= 64 ms / 2K = 125 / quad bursts).
	449	* For a simpler initialization, 15.6 us is used instead.
	450	*
	451	* #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
	452	* #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
	453	*/
	454	#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
	455	#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
	456
	457	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
	458	#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
	459	#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
	460
	461	/*
	462	* MAMR settings for SDRAM
	463	*/
	464
	465	/* 8 column SDRAM */
	466	#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
	467	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
	468	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
	469	/* 9 column SDRAM */
	470	#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
	471	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
	472	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
	473
	474
	475	/*
	476	* Internal Definitions
	477	*
	478	* Boot Flags
	479	*/
	480	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	481	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	482
	483	#define CONFIG_NET_MULTI
	484	#define CONFIG_SCC1_ENET
	485	#define CONFIG_FEC_ENET
	486	#define CONFIG_ETHPRIME "SCC ETHERNET"
	487
	488	#endif /* __CONFIG_H */