[people/ms/u-boot.git] / include / configs / am3517_crane.h

/*
 * am3517_crane.h - Default configuration for AM3517 CraneBoard.
 *
 * Author: Srinath.R <srinath@mistralsolutions.com>
 *
 * Based on include/configs/am3517evm.h
 *
 * Copyright (C) 2011 Mistral Solutions pvt Ltd
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_OMAP		1	/* in a TI OMAP core */
#define CONFIG_OMAP34XX		1	/* which is a 34XX */
#define CONFIG_OMAP3_AM3517CRANE	1	/* working with CRANEBOARD */
#define CONFIG_OMAP_COMMON

#define CONFIG_EMIF4	/* The chip has EMIF4 controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap3.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO		1
#define CONFIG_DISPLAY_BOARDINFO	1

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1
#define CONFIG_REVISION_TAG		1

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB sector */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
						/* initial data */
/*
 * DDR related
 */
#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3	/* UART3 on CRANEBOARD */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}
#define CONFIG_GENERIC_MMC		1
#define CONFIG_MMC			1
#define CONFIG_OMAP_HSMMC		1
#define CONFIG_DOS_PARTITION		1

/*
 * USB configuration
 * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
 * Enable CONFIG_MUSB_UDC for Device functionalities.
 */
#define CONFIG_USB_AM35X		1
#define CONFIG_MUSB_HCD			1

#ifdef CONFIG_USB_AM35X

#ifdef CONFIG_MUSB_HCD
#define CONFIG_CMD_USB

#define CONFIG_USB_STORAGE
#define CONGIG_CMD_STORAGE
#define CONFIG_CMD_FAT

#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_PREBOOT "usb start"
#endif /* CONFIG_USB_KEYBOARD */

#endif /* CONFIG_MUSB_HCD */

#ifdef CONFIG_MUSB_UDC
/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID		0x0451
#define CONFIG_USBD_PRODUCTID		0x5678
#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME	"AM3517CRANE"
#endif /* CONFIG_MUSB_UDC */

#endif /* CONFIG_USB_AM35X */

/* commands to include */
#include <config_cmd_default.h>

#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/

#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_NAND		/* NAND support			*/
#define CONFIG_CMD_DHCP
#undef CONFIG_CMD_PING

#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
#undef CONFIG_CMD_IMI		/* iminfo			*/
#undef CONFIG_CMD_IMLS		/* List all found images	*/

#define CONFIG_SYS_NO_FLASH
#define CONFIG_HARD_I2C			1
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		1
#define CONFIG_DRIVER_OMAP34XX_I2C	1

#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access */
							/* nand at CS0 */

#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
							/* NAND devices */

#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV		"nand0"
/* start of jffs2 partition */
#define CONFIG_JFFS2_PART_OFFSET	0x680000
#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* sz of jffs2 part */

/* Environment information */
#define CONFIG_BOOTDELAY	10

#define CONFIG_BOOTFILE		"uImage"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"console=ttyS2,115200n8\0" \
	"mmcdev=0\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"root=/dev/mmcblk0p2 rw " \
		"rootfstype=ext3 rootwait\0" \
	"nandargs=setenv bootargs console=${console} " \
		"root=/dev/mtdblock4 rw " \
		"rootfstype=jffs2\0" \
	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} 280000 400000; " \
		"bootm ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run nandboot; " \
			"fi; " \
		"fi; " \
	"else run nandboot; fi"

#define CONFIG_AUTO_COMPLETE	1
/*
 * Miscellaneous configurable options
 */
#define V_PROMPT			"AM3517_CRANE # "

#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT		V_PROMPT
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		32	/* max number of command */
						/* args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
								/* address */

/*
 * AM3517 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */

/* Configure the PISMO */
#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M

#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors */
						/* on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

#define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE

#define CONFIG_NAND_OMAP_GPMC
#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
#define CONFIG_ENV_IS_IN_NAND		1
#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB sector */
#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

/*-----------------------------------------------------------------------
 * CFI FLASH driver setup
 */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)

/* Flash banks JFFS2 should use */
#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
					CONFIG_SYS_MAX_NAND_DEVICE)
#define CONFIG_SYS_JFFS2_MEM_NAND
/* use flash_info[2] */
#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
#define CONFIG_SYS_JFFS2_NUM_BANKS	1

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)

/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE		0x40200800
#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK

#define CONFIG_SPL_BSS_START_ADDR	0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */

#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"

/* NAND boot config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
						10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	3
#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000

/*
 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 * 64 bytes before this address should be set aside for u-boot.img's
 * header. That is 0x800FFFC0--0x80100000 should not be used for any
 * other needs.
 */
#define CONFIG_SYS_TEXT_BASE		0x80100000
#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

#endif /* __CONFIG_H */
Commit	Line	Data
915162da S	1	/*
	2	* am3517_crane.h - Default configuration for AM3517 CraneBoard.
	3	*
	4	* Author: Srinath.R <srinath@mistralsolutions.com>
	5	*
	6	* Based on include/configs/am3517evm.h
	7	*
	8	* Copyright (C) 2011 Mistral Solutions pvt Ltd
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
915162da S	11	*/
	12
	13	#ifndef __CONFIG_H
	14	#define __CONFIG_H
	15
	16	/*
	17	* High Level Configuration Options
	18	*/
915162da S	19	#define CONFIG_OMAP 1 /* in a TI OMAP core */
	20	#define CONFIG_OMAP34XX 1 /* which is a 34XX */
	21	#define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */
806d2792	22	#define CONFIG_OMAP_COMMON
915162da S	23
	24	#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
	25
	26	#include <asm/arch/cpu.h> /* get chip and board defs */
	27	#include <asm/arch/omap3.h>
	28
	29	/*
	30	* Display CPU and Board information
	31	*/
	32	#define CONFIG_DISPLAY_CPUINFO 1
	33	#define CONFIG_DISPLAY_BOARDINFO 1
	34
	35	/* Clock Defines */
	36	#define V_OSCK 26000000 /* Clock output from T2 */
	37	#define V_SCLK (V_OSCK >> 1)
	38
915162da S	39	#define CONFIG_MISC_INIT_R
	40
	41	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	42	#define CONFIG_SETUP_MEMORY_TAGS 1
	43	#define CONFIG_INITRD_TAG 1
	44	#define CONFIG_REVISION_TAG 1
	45
	46	/*
	47	* Size of malloc() pool
	48	*/
	49	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
	50	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
	51	/* initial data */
	52	/*
	53	* DDR related
	54	*/
915162da S	55	#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
	56
	57	/*
	58	* Hardware drivers
	59	*/
	60
	61	/*
	62	* NS16550 Configuration
	63	*/
	64	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	65
	66	#define CONFIG_SYS_NS16550
	67	#define CONFIG_SYS_NS16550_SERIAL
	68	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	69	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	70
	71	/*
	72	* select serial console configuration
	73	*/
	74	#define CONFIG_CONS_INDEX 3
	75	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	76	#define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */
	77
	78	/* allow to overwrite serial and ethaddr */
	79	#define CONFIG_ENV_OVERWRITE
	80	#define CONFIG_BAUDRATE 115200
	81	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	82	115200}
a5a8821c	83	#define CONFIG_GENERIC_MMC 1
915162da	84	#define CONFIG_MMC 1
a5a8821c	85	#define CONFIG_OMAP_HSMMC 1
915162da S	86	#define CONFIG_DOS_PARTITION 1
	87
	88	/*
	89	* USB configuration
	90	* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
	91	* Enable CONFIG_MUSB_UDC for Device functionalities.
	92	*/
	93	#define CONFIG_USB_AM35X 1
	94	#define CONFIG_MUSB_HCD 1
	95
	96	#ifdef CONFIG_USB_AM35X
	97
	98	#ifdef CONFIG_MUSB_HCD
	99	#define CONFIG_CMD_USB
	100
	101	#define CONFIG_USB_STORAGE
	102	#define CONGIG_CMD_STORAGE
	103	#define CONFIG_CMD_FAT
	104
	105	#ifdef CONFIG_USB_KEYBOARD
	106	#define CONFIG_SYS_USB_EVENT_POLL
	107	#define CONFIG_PREBOOT "usb start"
	108	#endif /* CONFIG_USB_KEYBOARD */
	109
	110	#endif /* CONFIG_MUSB_HCD */
	111
	112	#ifdef CONFIG_MUSB_UDC
	113	/* USB device configuration */
	114	#define CONFIG_USB_DEVICE 1
	115	#define CONFIG_USB_TTY 1
	116	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	117	/* Change these to suit your needs */
	118	#define CONFIG_USBD_VENDORID 0x0451
	119	#define CONFIG_USBD_PRODUCTID 0x5678
	120	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	121	#define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE"
	122	#endif /* CONFIG_MUSB_UDC */
	123
	124	#endif /* CONFIG_USB_AM35X */
	125
	126	/* commands to include */
	127	#include <config_cmd_default.h>
	128
	129	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	130	#define CONFIG_CMD_FAT /* FAT support */
	131	#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
	132
	133	#define CONFIG_CMD_I2C /* I2C serial bus support */
	134	#define CONFIG_CMD_MMC /* MMC support */
	135	#define CONFIG_CMD_NAND /* NAND support */
	136	#define CONFIG_CMD_DHCP
80615006	137	#undef CONFIG_CMD_PING
915162da S	138
	139	#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
	140	#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
	141	#undef CONFIG_CMD_IMI /* iminfo */
	142	#undef CONFIG_CMD_IMLS /* List all found images */
	143
	144	#define CONFIG_SYS_NO_FLASH
	145	#define CONFIG_HARD_I2C 1
	146	#define CONFIG_SYS_I2C_SPEED 100000
	147	#define CONFIG_SYS_I2C_SLAVE 1
915162da S	148	#define CONFIG_DRIVER_OMAP34XX_I2C 1
	149
	150	#undef CONFIG_CMD_NET
	151	#undef CONFIG_CMD_NFS
	152	/*
	153	* Board NAND Info.
	154	*/
	155	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	156	/* to access nand */
	157	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	158	/* to access */
	159	/* nand at CS0 */
	160
	161	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
	162	/* NAND devices */
915162da S	163
	164	#define CONFIG_JFFS2_NAND
	165	/* nand device jffs2 lives on */
	166	#define CONFIG_JFFS2_DEV "nand0"
	167	/* start of jffs2 partition */
	168	#define CONFIG_JFFS2_PART_OFFSET 0x680000
	169	#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
	170
	171	/* Environment information */
	172	#define CONFIG_BOOTDELAY 10
	173
b3f44c21	174	#define CONFIG_BOOTFILE "uImage"
915162da S	175
	176	#define CONFIG_EXTRA_ENV_SETTINGS \
	177	"loadaddr=0x82000000\0" \
	178	"console=ttyS2,115200n8\0" \
a5a8821c	179	"mmcdev=0\0" \
915162da S	180	"mmcargs=setenv bootargs console=${console} " \
	181	"root=/dev/mmcblk0p2 rw " \
	182	"rootfstype=ext3 rootwait\0" \
	183	"nandargs=setenv bootargs console=${console} " \
	184	"root=/dev/mtdblock4 rw " \
	185	"rootfstype=jffs2\0" \
a5a8821c	186	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
915162da S	187	"bootscript=echo Running bootscript from mmc ...; " \
915162da S	188	"source ${loadaddr}\0" \
a5a8821c	189	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
915162da S	190	"mmcboot=echo Booting from mmc ...; " \
	191	"run mmcargs; " \
	192	"bootm ${loadaddr}\0" \
	193	"nandboot=echo Booting from nand ...; " \
	194	"run nandargs; " \
	195	"nand read ${loadaddr} 280000 400000; " \
	196	"bootm ${loadaddr}\0" \
	197
	198	#define CONFIG_BOOTCOMMAND \
66968110	199	"mmc dev ${mmcdev}; if mmc rescan; then " \
915162da S	200	"if run loadbootscript; then " \
	201	"run bootscript; " \
	202	"else " \
	203	"if run loaduimage; then " \
	204	"run mmcboot; " \
	205	"else run nandboot; " \
	206	"fi; " \
	207	"fi; " \
	208	"else run nandboot; fi"
	209
	210	#define CONFIG_AUTO_COMPLETE 1
	211	/*
	212	* Miscellaneous configurable options
	213	*/
	214	#define V_PROMPT "AM3517_CRANE # "
	215
	216	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	217	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
915162da S	218	#define CONFIG_SYS_PROMPT V_PROMPT
	219	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	220	/* Print Buffer Size */
	221	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	222	sizeof(CONFIG_SYS_PROMPT) + 16)
	223	#define CONFIG_SYS_MAXARGS 32 /* max number of command */
	224	/* args */
	225	/* Boot Argument Buffer Size */
	226	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	227	/* memtest works on */
	228	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	229	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	230	0x01F00000) /* 31MB */
	231
	232	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
	233	/* address */
	234
	235	/*
	236	* AM3517 has 12 GP timers, they can be driven by the system clock
	237	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	238	* This rate is divided by a local divisor.
	239	*/
	240	#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
	241	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
915162da	242
915162da S	243	/*-----------------------------------------------------------------------
	244	* Physical Memory Map
	245	*/
	246	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	247	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
915162da S	248	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
915162da S	249
915162da S	250	/*-----------------------------------------------------------------------
	251	* FLASH and environment organization
	252	*/
	253
	254	/* ** PISMO SUPPORT * */
	255
	256	/* Configure the PISMO */
	257	#define PISMO1_NAND_SIZE GPMC_SIZE_128M
	258	#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
	259
	260	#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
	261	/* on one chip */
	262	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
	263	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
	264
6cbec7b3	265	#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
915162da S	266
	267	/* Monitor at start of flash */
	268	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	269
	270	#define CONFIG_NAND_OMAP_GPMC
	271	#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
	272	#define CONFIG_ENV_IS_IN_NAND 1
	273	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
	274
6cbec7b3 LC	275	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */
	276	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
	277	#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
915162da S	278
	279	/*-----------------------------------------------------------------------
	280	* CFI FLASH driver setup
	281	*/
	282	/* timeout values are in ticks */
	283	#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
	284	#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
	285
	286	/* Flash banks JFFS2 should use */
	287	#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
	288	CONFIG_SYS_MAX_NAND_DEVICE)
	289	#define CONFIG_SYS_JFFS2_MEM_NAND
	290	/* use flash_info[2] */
	291	#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
	292	#define CONFIG_SYS_JFFS2_NUM_BANKS 1
	293
915162da S	294	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	295	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	296	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	297	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	298	CONFIG_SYS_INIT_RAM_SIZE - \
	299	GENERATED_GBL_DATA_SIZE)
d067cc46 TR	300
	301	/* Defines for SPL */
	302	#define CONFIG_SPL
47f7bcae	303	#define CONFIG_SPL_FRAMEWORK
d7cb93b2	304	#define CONFIG_SPL_BOARD_INIT
d067cc46 TR	305	#define CONFIG_SPL_NAND_SIMPLE
d067cc46 TR	306	#define CONFIG_SPL_TEXT_BASE 0x40200800
e0820ccc	307	#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
d067cc46 TR	308	#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
	309
	310	#define CONFIG_SPL_BSS_START_ADDR 0x80000000
	311	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
	312
	313	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
	314	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
	315	#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
	316	#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
	317
	318	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	319	#define CONFIG_SPL_LIBDISK_SUPPORT
	320	#define CONFIG_SPL_I2C_SUPPORT
	321	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	322	#define CONFIG_SPL_MMC_SUPPORT
	323	#define CONFIG_SPL_FAT_SUPPORT
	324	#define CONFIG_SPL_SERIAL_SUPPORT
	325	#define CONFIG_SPL_NAND_SUPPORT
6f2f01b9 SW	326	#define CONFIG_SPL_NAND_BASE
	327	#define CONFIG_SPL_NAND_DRIVERS
	328	#define CONFIG_SPL_NAND_ECC
d067cc46 TR	329	#define CONFIG_SPL_POWER_SUPPORT
	330	#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
	331
	332	/* NAND boot config */
	333	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	334	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	335	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	336	#define CONFIG_SYS_NAND_OOBSIZE 64
	337	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	338	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	339	#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
	340	10, 11, 12, 13}
	341	#define CONFIG_SYS_NAND_ECCSIZE 512
	342	#define CONFIG_SYS_NAND_ECCBYTES 3
d067cc46 TR	343	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	344	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	345
	346	/*
	347	* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
	348	* 64 bytes before this address should be set aside for u-boot.img's
	349	* header. That is 0x800FFFC0--0x80100000 should not be used for any
	350	* other needs.
	351	*/
	352	#define CONFIG_SYS_TEXT_BASE 0x80100000
	353	#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
	354	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	355
915162da	356	#endif /* __CONFIG_H */