[people/ms/u-boot.git] / include / configs / aristainetos-common.h

/*
 * (C) Copyright 2015
 * (C) Copyright 2014
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6Q SabreSD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __ARISTAINETOS_COMMON_CONFIG_H
#define __ARISTAINETOS_COMMON_CONFIG_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4501
#define CONFIG_MMCROOT		"/dev/mmcblk0p1"
#define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(64 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_MXC_UART

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0

#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_MTD
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

/* Command definition */
#define CONFIG_CMD_BMODE

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=u-boot.scr\0" \
	"fit_file=/boot/system.itb\0" \
	"loadaddr=0x12000000\0" \
	"fit_addr_r=0x14000000\0" \
	"uboot=/boot/u-boot.imx\0" \
	"uboot_sz=d0000\0" \
	"rescue_sys_addr=f0000\0" \
	"rescue_sys_length=f10000\0" \
	"panel=lb07wv8\0" \
	"splashpos=m,m\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
		"default ${board_type}\0" \
	"get_env=mw ${loadaddr} 0 0x20000;" \
		"mmc rescan;" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
		"env import -t ${loadaddr}\0" \
	"default_env=mw ${loadaddr} 0 0x20000;" \
		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
		"board_type panel;" \
		"env default -a;" \
		"env import -t ${loadaddr}\0" \
	"loadbootscript=" \
		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"mmcpart=1\0" \
	"mmcdev=0\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
		"${fit_file}\0" \
	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
		"${uboot}\0" \
	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
		"sf write ${loadaddr} 400 ${filesize};" \
		"sf read ${cmp_buf} 400 ${uboot_sz};" \
		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	"ubiboot=echo Booting from ubi ...; " \
		"run ubiargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"rescueargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/ram rw\0 " \
	"rescueboot=echo Booting rescue system from NOR ...; " \
		"run rescueargs addmtd addmisc set_fit_default;" \
		"bootm ${fit_addr_r}\0" \
	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
		"${rescue_sys_length}; imi ${fit_addr_r}\0" \
	CONFIG_EXTRA_ENV_BOARD_SETTINGS

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run mmc_load_fit; then " \
				"run mmcboot; " \
			"else " \
				"if run ubifs_load_fit; then " \
					"run ubiboot; " \
				"else " \
					"if run rescue_load_fit; then " \
						"run rescueboot; " \
					"else " \
						"echo RESCUE SYSTEM BOOT " \
							"FAILURE;" \
					"fi; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"else " \
		"if run ubifs_load_fit; then " \
			"run ubiboot; " \
		"else " \
			"if run rescue_load_fit; then " \
				"run rescueboot; " \
			"else " \
				"echo RESCUE SYSTEM BOOT FAILURE;" \
			"fi; " \
		"fi; " \
	"fi"

#define CONFIG_ARP_TIMEOUT		200UL

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)

#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

#define CONFIG_STACKSIZE		(128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(12 * 1024)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SECT_SIZE		(0x010000)
#define CONFIG_ENV_OFFSET		(0x0d0000)
#define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)

#define CONFIG_SYS_FSL_USDHC_NUM	2

/* I2C */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		0x7f
#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }

/* NAND stuff */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* RTC */
#define CONFIG_SYS_I2C_RTC_ADDR	0x68
#define CONFIG_SYS_RTC_BUS_NUM	2
#define CONFIG_RTC_M41T11
#define CONFIG_CMD_DATE

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* UBI support */
#define CONFIG_LZO
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_RBTREE
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS

#define CONFIG_MTD_UBI_FASTMAP
#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT	1

#define CONFIG_HW_WATCHDOG
#define CONFIG_IMX_WATCHDOG

#define CONFIG_FIT

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
/* check this console not needed, after test remove it */
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 198000000
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_CMD_BMP

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK	66000000

#endif /* __ARISTAINETOS_COMMON_CONFIG_H */
Commit	Line	Data
7254d92e HS	1	/*
	2	* (C) Copyright 2015
	3	* (C) Copyright 2014
	4	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	5	*
	6	* Based on:
	7	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	8	*
	9	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13	#ifndef __ARISTAINETOS_COMMON_CONFIG_H
	14	#define __ARISTAINETOS_COMMON_CONFIG_H
	15
7254d92e	16	#include "mx6_common.h"
7254d92e	17
7254d92e HS	18	#define CONFIG_MACH_TYPE 4501
	19	#define CONFIG_MMCROOT "/dev/mmcblk0p1"
	20	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
	21
7254d92e HS	22	/* Size of malloc() pool */
	23	#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
	24
	25	#define CONFIG_BOARD_EARLY_INIT_F
7254d92e HS	26
	27	#define CONFIG_MXC_UART
	28
7254d92e	29	/* MMC Configs */
7254d92e HS	30	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
7254d92e HS	31
7254d92e HS	32	#define CONFIG_CMD_PING
	33	#define CONFIG_CMD_DHCP
	34	#define CONFIG_CMD_MII
7254d92e HS	35	#define CONFIG_FEC_MXC
	36	#define CONFIG_MII
	37	#define IMX_FEC_BASE ENET_BASE_ADDR
	38	#define CONFIG_ETHPRIME "FEC"
	39	#define CONFIG_FEC_MXC_PHYADDR 0
	40
	41	#define CONFIG_PHYLIB
	42	#define CONFIG_PHY_MICREL
	43
	44	#define CONFIG_CMD_SF
7254d92e HS	45	#define CONFIG_SPI_FLASH_MTD
	46	#define CONFIG_SPI_FLASH_STMICRO
	47	#define CONFIG_MXC_SPI
7254d92e HS	48	#define CONFIG_SF_DEFAULT_SPEED 20000000
	49	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	50	#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
	51
7254d92e	52	/* Command definition */
7254d92e	53	#define CONFIG_CMD_BMODE
7254d92e	54
7254d92e HS	55	#define CONFIG_EXTRA_ENV_SETTINGS \
	56	"script=u-boot.scr\0" \
	57	"fit_file=/boot/system.itb\0" \
	58	"loadaddr=0x12000000\0" \
	59	"fit_addr_r=0x14000000\0" \
	60	"uboot=/boot/u-boot.imx\0" \
	61	"uboot_sz=d0000\0" \
	62	"rescue_sys_addr=f0000\0" \
	63	"rescue_sys_length=f10000\0" \
	64	"panel=lb07wv8\0" \
	65	"splashpos=m,m\0" \
	66	"console=" CONFIG_CONSOLE_DEV "\0" \
	67	"fdt_high=0xffffffff\0" \
	68	"initrd_high=0xffffffff\0" \
	69	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	70	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
	71	"default ${board_type}\0" \
	72	"get_env=mw ${loadaddr} 0 0x20000;" \
	73	"mmc rescan;" \
	74	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
	75	"env import -t ${loadaddr}\0" \
	76	"default_env=mw ${loadaddr} 0 0x20000;" \
	77	"env export -t ${loadaddr} serial# ethaddr eth1addr " \
	78	"board_type panel;" \
	79	"env default -a;" \
	80	"env import -t ${loadaddr}\0" \
	81	"loadbootscript=" \
	82	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	83	"bootscript=echo Running bootscript from mmc ...; " \
	84	"source\0" \
	85	"mmcpart=1\0" \
	86	"mmcdev=0\0" \
	87	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	88	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	89	"root=${mmcroot}\0" \
	90	"mmcboot=echo Booting from mmc ...; " \
	91	"run mmcargs addmtd addmisc set_fit_default;" \
	92	"bootm ${fit_addr_r}\0" \
	93	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
	94	"${fit_file}\0" \
	95	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
	96	"${uboot}\0" \
	97	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
	98	"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
	99	"setexpr uboot_maxsize ${uboot_sz} - 400;" \
	100	"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
	101	"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
	102	"sf write ${loadaddr} 400 ${filesize};" \
	103	"sf read ${cmp_buf} 400 ${uboot_sz};" \
	104	"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	105	"ubiboot=echo Booting from ubi ...; " \
	106	"run ubiargs addmtd addmisc set_fit_default;" \
	107	"bootm ${fit_addr_r}\0" \
7254d92e HS	108	"rescueargs=setenv bootargs console=${console},${baudrate} " \
	109	"root=/dev/ram rw\0 " \
	110	"rescueboot=echo Booting rescue system from NOR ...; " \
	111	"run rescueargs addmtd addmisc set_fit_default;" \
	112	"bootm ${fit_addr_r}\0" \
	113	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
	114	"${rescue_sys_length}; imi ${fit_addr_r}\0" \
	115	CONFIG_EXTRA_ENV_BOARD_SETTINGS
	116
	117	#define CONFIG_BOOTCOMMAND \
	118	"mmc dev ${mmcdev};" \
	119	"if mmc rescan; then " \
	120	"if run loadbootscript; then " \
	121	"run bootscript; " \
	122	"else " \
	123	"if run mmc_load_fit; then " \
	124	"run mmcboot; " \
	125	"else " \
	126	"if run ubifs_load_fit; then " \
	127	"run ubiboot; " \
	128	"else " \
	129	"if run rescue_load_fit; then " \
	130	"run rescueboot; " \
	131	"else " \
	132	"echo RESCUE SYSTEM BOOT " \
	133	"FAILURE;" \
	134	"fi; " \
	135	"fi; " \
	136	"fi; " \
	137	"fi; " \
	138	"else " \
	139	"if run ubifs_load_fit; then " \
	140	"run ubiboot; " \
	141	"else " \
	142	"if run rescue_load_fit; then " \
	143	"run rescueboot; " \
	144	"else " \
	145	"echo RESCUE SYSTEM BOOT FAILURE;" \
	146	"fi; " \
	147	"fi; " \
	148	"fi"
	149
	150	#define CONFIG_ARP_TIMEOUT 200UL
	151
7254d92e HS	152	/* Print Buffer Size */
7254d92e HS	153	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
7254d92e HS	154
	155	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	156	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
	157	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	158
7254d92e HS	159	#define CONFIG_STACKSIZE (128 * 1024)
	160
	161	/* Physical Memory Map */
	162	#define CONFIG_NR_DRAM_BANKS 1
	163	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	164
	165	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	166	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	167	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	168
	169	#define CONFIG_SYS_INIT_SP_OFFSET \
	170	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	171	#define CONFIG_SYS_INIT_SP_ADDR \
	172	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	173
056845c2	174	/* Environment organization */
7254d92e HS	175	#define CONFIG_ENV_SIZE (12 * 1024)
	176	#define CONFIG_ENV_IS_IN_SPI_FLASH
	177	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	178	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	179	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	180	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	181	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	182	#define CONFIG_ENV_SECT_SIZE (0x010000)
	183	#define CONFIG_ENV_OFFSET (0x0d0000)
	184	#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
	185
7254d92e HS	186	#define CONFIG_SYS_FSL_USDHC_NUM 2
	187
	188	/* I2C */
	189	#define CONFIG_CMD_I2C
	190	#define CONFIG_SYS_I2C
	191	#define CONFIG_SYS_I2C_MXC
	192	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	193	#define CONFIG_SYS_I2C_SPEED 100000
	194	#define CONFIG_SYS_I2C_SLAVE 0x7f
	195	#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
	196
7254d92e HS	197	/* NAND stuff */
	198	#define CONFIG_CMD_NAND
	199	#define CONFIG_CMD_NAND_TRIMFFS
	200	#define CONFIG_NAND_MXS
	201	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	202	#define CONFIG_SYS_NAND_BASE 0x40000000
	203	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	204	#define CONFIG_SYS_NAND_ONFI_DETECTION
	205
	206	/* DMA stuff, needed for GPMI/MXS NAND support */
	207	#define CONFIG_APBH_DMA
	208	#define CONFIG_APBH_DMA_BURST
	209	#define CONFIG_APBH_DMA_BURST8
	210
	211	/* RTC */
	212	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	213	#define CONFIG_SYS_RTC_BUS_NUM 2
	214	#define CONFIG_RTC_M41T11
	215	#define CONFIG_CMD_DATE
	216
	217	/* USB Configs */
	218	#define CONFIG_CMD_USB
7254d92e HS	219	#define CONFIG_USB_EHCI
	220	#define CONFIG_USB_EHCI_MX6
	221	#define CONFIG_USB_STORAGE
	222	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	223	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	224	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	225	#define CONFIG_MXC_USB_FLAGS 0
	226
	227	/* UBI support */
a380ce6e	228	#define CONFIG_LZO
7254d92e HS	229	#define CONFIG_CMD_MTDPARTS
	230	#define CONFIG_MTD_PARTITIONS
	231	#define CONFIG_MTD_DEVICE
	232	#define CONFIG_RBTREE
7254d92e HS	233	#define CONFIG_CMD_UBI
	234	#define CONFIG_CMD_UBIFS
	235
	236	#define CONFIG_MTD_UBI_FASTMAP
	237	#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1
	238
	239	#define CONFIG_HW_WATCHDOG
	240	#define CONFIG_IMX_WATCHDOG
	241
	242	#define CONFIG_FIT
	243
	244	/* Framebuffer */
	245	#define CONFIG_VIDEO
	246	#define CONFIG_VIDEO_IPUV3
	247	/* check this console not needed, after test remove it */
	248	#define CONFIG_CFB_CONSOLE
	249	#define CONFIG_VGA_AS_SINGLE_DEVICE
	250	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	251	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	252	#define CONFIG_VIDEO_BMP_RLE8
	253	#define CONFIG_SPLASH_SCREEN
	254	#define CONFIG_SPLASH_SCREEN_ALIGN
	255	#define CONFIG_BMP_16BPP
	256	#define CONFIG_VIDEO_LOGO
	257	#define CONFIG_VIDEO_BMP_LOGO
	258	#define CONFIG_IPUV3_CLK 198000000
	259	#define CONFIG_IMX_VIDEO_SKIP
	260
	261	#define CONFIG_CMD_BMP
	262
	263	#define CONFIG_PWM_IMX
	264	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	265
	266	#endif /* __ARISTAINETOS_COMMON_CONFIG_H */