[people/ms/u-boot.git] / include / configs / at91sam9260ek.h

/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * SoC must be defined first, before hardware.h is included.
 * In this case SoC is defined in boards.cfg.
 */
#include <asm/hardware.h>

/*
 * Warning: changing CONFIG_SYS_TEXT_BASE requires
 * adapting the initial boot program.
 * Since the linker has to swallow that define, we must use a pure
 * hex number here!
 */
#define CONFIG_SYS_TEXT_BASE		0x21f00000

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* main clock xtal */

/* Define actual evaluation board type from used processor type */
#ifdef CONFIG_AT91SAM9G20
# define CONFIG_AT91SAM9G20EK	/* It's an Atmel AT91SAM9G20 EK */
#else
# define CONFIG_AT91SAM9260EK	/* It's an Atmel AT91SAM9260 EK */
#endif

/* Misc CPU related */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO

#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT

#define CONFIG_SYS_GENERIC_BOARD

/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */

/* serial console */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
#define	CONFIG_USART_ID			ATMEL_ID_SYS
#define CONFIG_BAUDRATE			115200

/* LED */
#define CONFIG_AT91_LED
#define	CONFIG_RED_LED		AT91_PIN_PA9	/* this is the power led */
#define	CONFIG_GREEN_LED	AT91_PIN_PA6	/* this is the user led */

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE	1
#define CONFIG_BOOTP_BOOTPATH		1
#define CONFIG_BOOTP_GATEWAY		1
#define CONFIG_BOOTP_HOSTNAME		1

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_SOURCE

#define CONFIG_CMD_PING		1
#define CONFIG_CMD_DHCP		1
#define CONFIG_CMD_NAND		1
#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB		1

/*
 * SDRAM: 1 bank, min 32, max 128 MB
 * Initialized before u-boot gets started.
 */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
#define CONFIG_SYS_SDRAM_SIZE		0x04000000

/*
 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
 * leaving the correct space for initial global data structure above
 * that address while providing maximum stack area below.
 */
#ifdef CONFIG_AT91SAM9XE
# define CONFIG_SYS_INIT_SP_ADDR \
	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
#else
# define CONFIG_SYS_INIT_SP_ADDR \
	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
#endif

/*
 * The (arm)linux board id set by generic code depending on configured board
 * (see boards.cfg for different boards)
 */
#ifdef CONFIG_AT91SAM9G20
	/* the sam9g20 variants have two different board ids */
# ifdef CONFIG_AT91SAM9G20EK_2MMC
	/* we may be setup for the 2MMC variant of at91sam9g20ek */
#  define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC
# else
	/* or the normal at91sam9g20ek */
#  define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK
# endif
#else
	/* otherwise default to good old at91sam9260ek */
# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
#endif

/* DataFlash */
#ifndef CONFIG_AT91SAM9G20EK_2MMC
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH		1
#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
#define AT91_SPI_CLK			15000000
#endif

#ifdef CONFIG_AT91SAM9G20EK
#define DATAFLASH_TCSS			(0x22 << 16)
#else
#define DATAFLASH_TCSS			(0x1a << 16)
#endif
#define DATAFLASH_TCHS			(0x1 << 24)

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8
#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
#endif

/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

/* FAT */
#ifdef CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif

/* NOR flash - no real flash on this board */
#define CONFIG_SYS_NO_FLASH			1

/* Ethernet */
#define CONFIG_MACB			1
#define CONFIG_RMII			1
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_RESET_PHY_R		1
#define CONFIG_AT91_WANTS_COMMON_PHY

/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW		1
#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
#define CONFIG_USB_STORAGE		1

#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */

#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END			0x23e00000

#ifdef CONFIG_SYS_USE_DATAFLASH_CS0

/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_ENV_IS_IN_DATAFLASH	1
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
#define CONFIG_ENV_OFFSET		0x4200
#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x4200
#define CONFIG_BOOTCOMMAND	"cp.b 0xC0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
				"root=/dev/mtdblock0 "			\
				"mtdparts=atmel_nand:-(root) "		\
				"rw rootfstype=jffs2"

#elif CONFIG_SYS_USE_DATAFLASH_CS1

/* bootstrap + u-boot + env + linux in dataflash on CS1 */
#define CONFIG_ENV_IS_IN_DATAFLASH	1
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
#define CONFIG_ENV_OFFSET		0x4200
#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x4200
#define CONFIG_BOOTCOMMAND	"cp.b 0xD0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
				"root=/dev/mtdblock0 "			\
				"mtdparts=atmel_nand:-(root) "		\
				"rw rootfstype=jffs2"

#elif defined(CONFIG_SYS_USE_NANDFLASH)

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND	1
#define CONFIG_ENV_OFFSET		0xc0000
#define CONFIG_ENV_OFFSET_REDUND	0x100000
#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
#define CONFIG_BOOTARGS							\
	"console=ttyS0,115200 earlyprintk "				\
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
	"256k(env),256k(env_redundant),256k(spare),"			\
	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
	"root=/dev/mtdblock7 rw rootfstype=jffs2"

#else	/* CONFIG_SYS_USE_MMC */
/* bootstrap + u-boot + env + linux in mmc */
#define CONFIG_ENV_IS_IN_MMC
/* For FAT system, most cases it should be in the reserved sector */
#define CONFIG_ENV_OFFSET		0x2000
#define CONFIG_ENV_SIZE			0x1000
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_BOOTCOMMAND						\
	"fatload mmc 0:1 0x22000000 uImage; bootm"
#define CONFIG_BOOTARGS							\
	"console=ttyS0,115200 earlyprintk "				\
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
	"256k(env),256k(env_redundant),256k(spare),"			\
	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
	"root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
#endif

#define CONFIG_SYS_PROMPT		"U-Boot> "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP		1
#define CONFIG_CMDLINE_EDITING	1
#define CONFIG_AUTO_COMPLETE

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)

#endif
Commit	Line	Data
0176d43e SP	1	/*
0176d43e SP	2	* (C) Copyright 2007-2008
c9e798d3	3	* Stelian Pop <stelian@popies.net>
0176d43e SP	4	* Lead Tech Design <www.leadtechdesign.com>
0176d43e SP	5	*
df486b1f	6	* Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards.
0176d43e	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
0176d43e SP	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
8c6407fc RM	14	/*
	15	* SoC must be defined first, before hardware.h is included.
	16	* In this case SoC is defined in boards.cfg.
	17	*/
	18	#include <asm/hardware.h>
425de62d	19
8c6407fc RM	20	/*
	21	* Warning: changing CONFIG_SYS_TEXT_BASE requires
	22	* adapting the initial boot program.
	23	* Since the linker has to swallow that define, we must use a pure
	24	* hex number here!
	25	*/
	26	#define CONFIG_SYS_TEXT_BASE 0x21f00000
0176d43e	27
8c6407fc RM	28	/* ARM asynchronous clock */
	29	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
	30	#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */
df486b1f	31
8c6407fc RM	32	/* Define actual evaluation board type from used processor type */
	33	#ifdef CONFIG_AT91SAM9G20
	34	# define CONFIG_AT91SAM9G20EK /* It's an Atmel AT91SAM9G20 EK */
df486b1f	35	#else
8c6407fc	36	# define CONFIG_AT91SAM9260EK /* It's an Atmel AT91SAM9260 EK */
df486b1f NF	37	#endif
df486b1f NF	38
8c6407fc	39	/* Misc CPU related */
dc39ae95	40	#define CONFIG_ARCH_CPU_INIT
8c6407fc RM	41	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	42	#define CONFIG_SETUP_MEMORY_TAGS
	43	#define CONFIG_INITRD_TAG
0176d43e	44	#define CONFIG_SKIP_LOWLEVEL_INIT
8c6407fc RM	45	#define CONFIG_BOARD_EARLY_INIT_F
	46	#define CONFIG_DISPLAY_CPUINFO
	47
f9129fe3	48	#define CONFIG_CMD_BOOTZ
36873e7d NF	49	#define CONFIG_OF_LIBFDT
36873e7d NF	50
59158ba3 BS	51	#define CONFIG_SYS_GENERIC_BOARD
59158ba3 BS	52
8c6407fc RM	53	/* general purpose I/O */
	54	#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
	55	#define CONFIG_AT91_GPIO
	56	#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
	57
	58	/* serial console */
	59	#define CONFIG_ATMEL_USART
	60	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	61	#define CONFIG_USART_ID ATMEL_ID_SYS
	62	#define CONFIG_BAUDRATE 115200
0176d43e	63
a484b00b JCPV	64	/* LED */
	65	#define CONFIG_AT91_LED
	66	#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */
	67	#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */
	68
0176d43e	69	#define CONFIG_BOOTDELAY 3
0176d43e	70
0176d43e SP	71	/*
	72	* BOOTP options
	73	*/
	74	#define CONFIG_BOOTP_BOOTFILESIZE 1
	75	#define CONFIG_BOOTP_BOOTPATH 1
	76	#define CONFIG_BOOTP_GATEWAY 1
	77	#define CONFIG_BOOTP_HOSTNAME 1
	78
	79	/*
	80	* Command line configuration.
	81	*/
	82	#include <config_cmd_default.h>
	83	#undef CONFIG_CMD_BDI
0176d43e	84	#undef CONFIG_CMD_FPGA
74de7aef	85	#undef CONFIG_CMD_IMI
0176d43e	86	#undef CONFIG_CMD_IMLS
74de7aef WD	87	#undef CONFIG_CMD_LOADS
74de7aef WD	88	#undef CONFIG_CMD_SOURCE
0176d43e SP	89
	90	#define CONFIG_CMD_PING 1
	91	#define CONFIG_CMD_DHCP 1
	92	#define CONFIG_CMD_NAND 1
a73267a7 WJ	93	#define CONFIG_CMD_MMC
a73267a7 WJ	94	#define CONFIG_CMD_FAT
0176d43e SP	95	#define CONFIG_CMD_USB 1
0176d43e SP	96
8c6407fc RM	97	/*
	98	* SDRAM: 1 bank, min 32, max 128 MB
	99	* Initialized before u-boot gets started.
	100	*/
0176d43e	101	#define CONFIG_NR_DRAM_BANKS 1
8c6407fc RM	102	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
	103	#define CONFIG_SYS_SDRAM_SIZE 0x04000000
	104
	105	/*
	106	* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
	107	* leaving the correct space for initial global data structure above
	108	* that address while providing maximum stack area below.
	109	*/
	110	#ifdef CONFIG_AT91SAM9XE
	111	# define CONFIG_SYS_INIT_SP_ADDR \
	112	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
	113	#else
	114	# define CONFIG_SYS_INIT_SP_ADDR \
	115	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
	116	#endif
0176d43e	117
d0a51373 AB	118	/*
	119	* The (arm)linux board id set by generic code depending on configured board
	120	* (see boards.cfg for different boards)
	121	*/
	122	#ifdef CONFIG_AT91SAM9G20
	123	/* the sam9g20 variants have two different board ids */
	124	# ifdef CONFIG_AT91SAM9G20EK_2MMC
	125	/* we may be setup for the 2MMC variant of at91sam9g20ek */
	126	# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC
	127	# else
	128	/* or the normal at91sam9g20ek */
	129	# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK
	130	# endif
	131	#else
	132	/* otherwise default to good old at91sam9260ek */
	133	# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
	134	#endif
	135
0176d43e	136	/* DataFlash */
8495faf5	137	#ifndef CONFIG_AT91SAM9G20EK_2MMC
4758ebdd	138	#define CONFIG_ATMEL_DATAFLASH_SPI
0176d43e	139	#define CONFIG_HAS_DATAFLASH 1
6d0f6bcf JCPV	140	#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
	141	#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
	142	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
	143	#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
79f0cb6e	144	#define AT91_SPI_CLK 15000000
8495faf5	145	#endif
df486b1f NF	146
	147	#ifdef CONFIG_AT91SAM9G20EK
	148	#define DATAFLASH_TCSS (0x22 << 16)
	149	#else
0176d43e	150	#define DATAFLASH_TCSS (0x1a << 16)
df486b1f	151	#endif
0176d43e SP	152	#define DATAFLASH_TCHS (0x1 << 24)
	153
	154	/* NAND flash */
74c076d6 JCPV	155	#ifdef CONFIG_CMD_NAND
74c076d6 JCPV	156	#define CONFIG_NAND_ATMEL
8c6407fc RM	157	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	158	#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
	159	#define CONFIG_SYS_NAND_DBW_8
	160	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	161	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
	162	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
	163	#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
74c076d6	164	#endif
0176d43e	165
a73267a7 WJ	166	/* MMC */
	167	#ifdef CONFIG_CMD_MMC
	168	#define CONFIG_MMC
	169	#define CONFIG_GENERIC_MMC
	170	#define CONFIG_GENERIC_ATMEL_MCI
	171	#endif
	172
	173	/* FAT */
	174	#ifdef CONFIG_CMD_FAT
	175	#define CONFIG_DOS_PARTITION
	176	#endif
	177
0176d43e	178	/* NOR flash - no real flash on this board */
6d0f6bcf	179	#define CONFIG_SYS_NO_FLASH 1
0176d43e SP	180
	181	/* Ethernet */
	182	#define CONFIG_MACB 1
	183	#define CONFIG_RMII 1
0176d43e SP	184	#define CONFIG_NET_RETRY_COUNT 20
0176d43e SP	185	#define CONFIG_RESET_PHY_R 1
4535a24c	186	#define CONFIG_AT91_WANTS_COMMON_PHY
0176d43e SP	187
0176d43e SP	188	/* USB */
2b7178af	189	#define CONFIG_USB_ATMEL
dcd2f1a0	190	#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
0176d43e	191	#define CONFIG_USB_OHCI_NEW 1
6d0f6bcf JCPV	192	#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
	193	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
	194	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
	195	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
0176d43e SP	196	#define CONFIG_USB_STORAGE 1
0176d43e SP	197
6d0f6bcf	198	#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
0176d43e	199
8c6407fc	200	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
6d0f6bcf	201	#define CONFIG_SYS_MEMTEST_END 0x23e00000
0176d43e	202
6d0f6bcf	203	#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
0176d43e SP	204
0176d43e SP	205	/* bootstrap + u-boot + env + linux in dataflash on CS0 */
057c849c	206	#define CONFIG_ENV_IS_IN_DATAFLASH 1
6d0f6bcf	207	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
0e8d1586	208	#define CONFIG_ENV_OFFSET 0x4200
6d0f6bcf	209	#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
0e8d1586	210	#define CONFIG_ENV_SIZE 0x4200
e139cb31	211	#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
96996ac2 SP	212	#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
96996ac2 SP	213	"root=/dev/mtdblock0 " \
918319c7	214	"mtdparts=atmel_nand:-(root) " \
96996ac2	215	"rw rootfstype=jffs2"
0176d43e	216
6d0f6bcf	217	#elif CONFIG_SYS_USE_DATAFLASH_CS1
0176d43e SP	218
0176d43e SP	219	/* bootstrap + u-boot + env + linux in dataflash on CS1 */
057c849c	220	#define CONFIG_ENV_IS_IN_DATAFLASH 1
6d0f6bcf	221	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
0e8d1586	222	#define CONFIG_ENV_OFFSET 0x4200
6d0f6bcf	223	#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
0e8d1586	224	#define CONFIG_ENV_SIZE 0x4200
e139cb31	225	#define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm"
96996ac2 SP	226	#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
96996ac2 SP	227	"root=/dev/mtdblock0 " \
918319c7	228	"mtdparts=atmel_nand:-(root) " \
96996ac2	229	"rw rootfstype=jffs2"
0176d43e	230
24802073	231	#elif defined(CONFIG_SYS_USE_NANDFLASH)
0176d43e SP	232
0176d43e SP	233	/* bootstrap + u-boot + env + linux in nandflash */
51bfee19	234	#define CONFIG_ENV_IS_IN_NAND 1
0c58cfa9 BS	235	#define CONFIG_ENV_OFFSET 0xc0000
0c58cfa9 BS	236	#define CONFIG_ENV_OFFSET_REDUND 0x100000
0e8d1586	237	#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
0c58cfa9 BS	238	#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
	239	#define CONFIG_BOOTARGS \
	240	"console=ttyS0,115200 earlyprintk " \
	241	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	242	"256k(env),256k(env_redundant),256k(spare)," \
	243	"512k(dtb),6M(kernel)ro,-(rootfs) " \
	244	"root=/dev/mtdblock7 rw rootfstype=jffs2"
0176d43e	245
24802073 WJ	246	#else /* CONFIG_SYS_USE_MMC */
	247	/* bootstrap + u-boot + env + linux in mmc */
	248	#define CONFIG_ENV_IS_IN_MMC
	249	/* For FAT system, most cases it should be in the reserved sector */
	250	#define CONFIG_ENV_OFFSET 0x2000
	251	#define CONFIG_ENV_SIZE 0x1000
	252	#define CONFIG_SYS_MMC_ENV_DEV 0
	253
	254	#define CONFIG_BOOTCOMMAND \
	255	"fatload mmc 0:1 0x22000000 uImage; bootm"
	256	#define CONFIG_BOOTARGS \
	257	"console=ttyS0,115200 earlyprintk " \
	258	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	259	"256k(env),256k(env_redundant),256k(spare)," \
	260	"512k(dtb),6M(kernel)ro,-(rootfs) " \
	261	"root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
0176d43e SP	262	#endif
0176d43e SP	263
6d0f6bcf JCPV	264	#define CONFIG_SYS_PROMPT "U-Boot> "
	265	#define CONFIG_SYS_CBSIZE 256
	266	#define CONFIG_SYS_MAXARGS 16
	267	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	268	#define CONFIG_SYS_LONGHELP 1
0176d43e	269	#define CONFIG_CMDLINE_EDITING 1
e139cb31	270	#define CONFIG_AUTO_COMPLETE
0176d43e	271
0176d43e SP	272	/*
	273	* Size of malloc() pool
	274	*/
6d0f6bcf	275	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
0176d43e	276
0176d43e	277	#endif