[people/ms/u-boot.git] / include / configs / cm_t35.h

/*
 * (C) Copyright 2011 CompuLab, Ltd.
 * Mike Rapoport <mike@compulab.co.il>
 * Igor Grinberg <grinberg@compulab.co.il>
 *
 * Based on omap3_beagle.h
 * (C) Copyright 2006-2008
 * Texas Instruments.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Syed Mohammed Khasim <x0khasim@ti.com>
 *
 * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_OMAP	/* in a TI OMAP core */
#define CONFIG_OMAP34XX	/* which is a 34XX */
#define CONFIG_OMAP_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_CM_T3X	/* working with CM-T35 and CM-T3730 */
#define CONFIG_OMAP_COMMON

#define CONFIG_SYS_TEXT_BASE	0x80008000

#define CONFIG_SDRC	/* The chip has SDRC controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap3.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_OF_LIBFDT		1
/*
 * The early kernel mapping on ARM currently only maps from the base of DRAM
 * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
 * so that leaves DRAM base to DRAM base + 0x4000 available.
 */
#define CONFIG_SYS_BOOTMAPSZ	        0x4000

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SERIAL_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KiB */
					/* Sector */
#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + (128 << 10))

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3	/* UART3 */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}

#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION

/* USB */
#define CONFIG_USB_OMAP3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_USB_ULPI
#define CONFIG_USB_ULPI_VIEWPORT_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_MUSB_UDC
#define CONFIG_TWL4030_USB
#define CONFIG_CMD_USB

/* USB device configuration */
#define CONFIG_USB_DEVICE
#define CONFIG_USB_TTY
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/* commands to include */
#include <config_cmd_default.h>

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT		"nand0=nand"
#define MTDPARTS_DEFAULT	"mtdparts=nand:512k(x-loader),"\
				"1920k(u-boot),256k(u-boot-env),"\
				"4m(kernel),-(fs)"

#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_NAND		/* NAND support			*/
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING

#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
#undef CONFIG_CMD_IMLS		/* List all found images	*/

#define CONFIG_SYS_NO_FLASH
#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		1
#define CONFIG_DRIVER_OMAP34XX_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_I2C_MULTI_BUS

/*
 * TWL4030
 */
#define CONFIG_TWL4030_POWER
#define CONFIG_TWL4030_LED

/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_QUIET_TEST
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access nand at */
							/* CS0 */
#define GPMC_NAND_ECC_LP_x8_LAYOUT

#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
							/* devices */
/* Environment information */
#define CONFIG_BOOTDELAY		3
#define CONFIG_ZERO_BOOTDELAY_CHECK

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"usbtty=cdc_acm\0" \
	"console=ttyS2,115200n8\0" \
	"mpurate=500\0" \
	"vram=12M\0" \
	"dvimode=1024x768MR-16@60\0" \
	"defaultdisplay=dvi\0" \
	"mmcdev=0\0" \
	"mmcroot=/dev/mmcblk0p2 rw\0" \
	"mmcrootfstype=ext4 rootwait\0" \
	"nandroot=/dev/mtdblock4 rw\0" \
	"nandrootfstype=ubifs\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype}\0" \
	"nandargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype}\0" \
	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} 2a0000 400000; " \
		"bootm ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run nandboot; " \
			"fi; " \
		"fi; " \
	"else run nandboot; fi"

/*
 * Miscellaneous configurable options
 */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_TIMESTAMP
#define CONFIG_SYS_AUTOLOAD		"no"
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT		"CM-T3x # "
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
								/* works on */
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
							/* load address */

/*
 * OMAP3 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	/* CS1 is never populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */
/* Configure the PISMO */
#define PISMO1_NAND_SIZE		GPMC_SIZE_128M

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

#define CONFIG_ENV_IS_IN_NAND
#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CM_T3X_SMC911X_BASE	0x2C000000
#define SB_T35_SMC911X_BASE	(CM_T3X_SMC911X_BASE + (16 << 20))
#define CONFIG_SMC911X_BASE	CM_T3X_SMC911X_BASE
#endif /* (CONFIG_CMD_NET) */

/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR +	\
					 CONFIG_SYS_INIT_RAM_SIZE -	\
					 GENERATED_GBL_DATA_SIZE)

/* Status LED */
#define CONFIG_STATUS_LED		/* Status LED enabled */
#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_GREEN		0
#define STATUS_LED_BIT			STATUS_LED_GREEN
#define STATUS_LED_STATE		STATUS_LED_ON
#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT			STATUS_LED_BIT
#define GREEN_LED_GPIO			186 /* CM-T35 Green LED is GPIO186 */

#define CONFIG_SPLASHIMAGE_GUARD

/* GPIO banks */
#ifdef CONFIG_STATUS_LED
#define CONFIG_OMAP3_GPIO_6	/* GPIO186 is in GPIO bank 6  */
#endif

/* Display Configuration */
#define CONFIG_OMAP3_GPIO_2
#define CONFIG_VIDEO_OMAP3
#define LCD_BPP		LCD_COLOR16

#define CONFIG_LCD
#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP

#endif /* __CONFIG_H */
Commit	Line	Data
36b4e2dd	1	/*
9fc376be	2	* (C) Copyright 2011 CompuLab, Ltd.
36b4e2dd	3	* Mike Rapoport <mike@compulab.co.il>
dccd9a0b	4	* Igor Grinberg <grinberg@compulab.co.il>
36b4e2dd MR	5	*
	6	* Based on omap3_beagle.h
	7	* (C) Copyright 2006-2008
	8	* Texas Instruments.
	9	* Richard Woodruff <r-woodruff2@ti.com>
	10	* Syed Mohammed Khasim <x0khasim@ti.com>
	11	*
b65a77a8	12	* Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
36b4e2dd	13	*
1a459660	14	* SPDX-License-Identifier: GPL-2.0+
36b4e2dd MR	15	*/
	16
	17	#ifndef __CONFIG_H
	18	#define __CONFIG_H
	19
	20	/*
	21	* High Level Configuration Options
	22	*/
9fc376be NK	23	#define CONFIG_OMAP /* in a TI OMAP core */
9fc376be NK	24	#define CONFIG_OMAP34XX /* which is a 34XX */
308252ad	25	#define CONFIG_OMAP_GPIO
5b28f204	26	#define CONFIG_CMD_GPIO
9fc376be	27	#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
806d2792	28	#define CONFIG_OMAP_COMMON
36b4e2dd MR	29
	30	#define CONFIG_SYS_TEXT_BASE 0x80008000
	31
	32	#define CONFIG_SDRC /* The chip has SDRC controller */
	33
	34	#include <asm/arch/cpu.h> /* get chip and board defs */
	35	#include <asm/arch/omap3.h>
	36
	37	/*
	38	* Display CPU and Board information
	39	*/
9fc376be NK	40	#define CONFIG_DISPLAY_CPUINFO
9fc376be NK	41	#define CONFIG_DISPLAY_BOARDINFO
36b4e2dd MR	42
	43	/* Clock Defines */
	44	#define V_OSCK 26000000 /* Clock output from T2 */
	45	#define V_SCLK (V_OSCK >> 1)
	46
36b4e2dd MR	47	#define CONFIG_MISC_INIT_R
	48
	49	#define CONFIG_OF_LIBFDT 1
	50	/*
	51	* The early kernel mapping on ARM currently only maps from the base of DRAM
	52	* to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
	53	* The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
	54	* so that leaves DRAM base to DRAM base + 0x4000 available.
	55	*/
	56	#define CONFIG_SYS_BOOTMAPSZ 0x4000
	57
9fc376be NK	58	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	59	#define CONFIG_SETUP_MEMORY_TAGS
	60	#define CONFIG_INITRD_TAG
	61	#define CONFIG_REVISION_TAG
82309250	62	#define CONFIG_SERIAL_TAG
36b4e2dd MR	63
	64	/*
	65	* Size of malloc() pool
	66	*/
390cdcda	67	#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
9fc376be NK	68	/* Sector */
9fc376be NK	69	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
36b4e2dd MR	70
	71	/*
	72	* Hardware drivers
	73	*/
	74
	75	/*
	76	* NS16550 Configuration
	77	*/
	78	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	79
	80	#define CONFIG_SYS_NS16550
	81	#define CONFIG_SYS_NS16550_SERIAL
	82	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	83	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	84
	85	/*
	86	* select serial console configuration
	87	*/
	88	#define CONFIG_CONS_INDEX 3
	89	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	90	#define CONFIG_SERIAL3 3 /* UART3 */
	91
	92	/* allow to overwrite serial and ethaddr */
	93	#define CONFIG_ENV_OVERWRITE
	94	#define CONFIG_BAUDRATE 115200
	95	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	96	115200}
9fc376be NK	97
	98	#define CONFIG_GENERIC_MMC
	99	#define CONFIG_MMC
	100	#define CONFIG_OMAP_HSMMC
	101	#define CONFIG_DOS_PARTITION
36b4e2dd	102
36b4e2dd	103	/* USB */
9fc376be	104	#define CONFIG_USB_OMAP3
854a7836 NK	105	#define CONFIG_USB_EHCI
	106	#define CONFIG_USB_EHCI_OMAP
	107	#define CONFIG_USB_ULPI
	108	#define CONFIG_USB_ULPI_VIEWPORT_OMAP
	109	#define CONFIG_USB_STORAGE
	110	#define CONFIG_MUSB_UDC
9fc376be	111	#define CONFIG_TWL4030_USB
854a7836	112	#define CONFIG_CMD_USB
36b4e2dd MR	113
36b4e2dd MR	114	/* USB device configuration */
9fc376be NK	115	#define CONFIG_USB_DEVICE
	116	#define CONFIG_USB_TTY
	117	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
36b4e2dd MR	118
	119	/* commands to include */
	120	#include <config_cmd_default.h>
	121
	122	#define CONFIG_CMD_CACHE
	123	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	124	#define CONFIG_CMD_FAT /* FAT support */
36b4e2dd MR	125	#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
36b4e2dd MR	126	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
0b800a6b	127	#define CONFIG_MTD_PARTITIONS
9fc376be NK	128	#define MTDIDS_DEFAULT "nand0=nand"
9fc376be NK	129	#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
0b800a6b	130	"1920k(u-boot),256k(u-boot-env),"\
9fc376be	131	"4m(kernel),-(fs)"
36b4e2dd MR	132
	133	#define CONFIG_CMD_I2C /* I2C serial bus support */
	134	#define CONFIG_CMD_MMC /* MMC support */
	135	#define CONFIG_CMD_NAND /* NAND support */
	136	#define CONFIG_CMD_DHCP
	137	#define CONFIG_CMD_PING
	138
	139	#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
	140	#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
	141	#undef CONFIG_CMD_IMLS /* List all found images */
	142
	143	#define CONFIG_SYS_NO_FLASH
9fc376be	144	#define CONFIG_HARD_I2C
36b4e2dd MR	145	#define CONFIG_SYS_I2C_SPEED 100000
36b4e2dd MR	146	#define CONFIG_SYS_I2C_SLAVE 1
9fc376be	147	#define CONFIG_DRIVER_OMAP34XX_I2C
82309250 NK	148	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
82309250 NK	149	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
79874ae9	150	#define CONFIG_I2C_MULTI_BUS
36b4e2dd MR	151
	152	/*
	153	* TWL4030
	154	*/
9fc376be NK	155	#define CONFIG_TWL4030_POWER
9fc376be NK	156	#define CONFIG_TWL4030_LED
36b4e2dd MR	157
	158	/*
	159	* Board NAND Info.
	160	*/
9fc376be	161	#define CONFIG_SYS_NAND_QUIET_TEST
36b4e2dd MR	162	#define CONFIG_NAND_OMAP_GPMC
	163	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	164	/* to access nand */
	165	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	166	/* to access nand at */
	167	/* CS0 */
816e3921	168	#define GPMC_NAND_ECC_LP_x8_LAYOUT
36b4e2dd MR	169
	170	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
	171	/* devices */
36b4e2dd	172	/* Environment information */
a431be4c	173	#define CONFIG_BOOTDELAY 3
9bd5c1ad	174	#define CONFIG_ZERO_BOOTDELAY_CHECK
36b4e2dd MR	175
	176	#define CONFIG_EXTRA_ENV_SETTINGS \
	177	"loadaddr=0x82000000\0" \
	178	"usbtty=cdc_acm\0" \
	179	"console=ttyS2,115200n8\0" \
	180	"mpurate=500\0" \
	181	"vram=12M\0" \
	182	"dvimode=1024x768MR-16@60\0" \
	183	"defaultdisplay=dvi\0" \
	184	"mmcdev=0\0" \
	185	"mmcroot=/dev/mmcblk0p2 rw\0" \
0b800a6b	186	"mmcrootfstype=ext4 rootwait\0" \
36b4e2dd	187	"nandroot=/dev/mtdblock4 rw\0" \
0b800a6b	188	"nandrootfstype=ubifs\0" \
36b4e2dd MR	189	"mmcargs=setenv bootargs console=${console} " \
	190	"mpurate=${mpurate} " \
	191	"vram=${vram} " \
	192	"omapfb.mode=dvi:${dvimode} " \
	193	"omapfb.debug=y " \
	194	"omapdss.def_disp=${defaultdisplay} " \
	195	"root=${mmcroot} " \
	196	"rootfstype=${mmcrootfstype}\0" \
	197	"nandargs=setenv bootargs console=${console} " \
	198	"mpurate=${mpurate} " \
	199	"vram=${vram} " \
	200	"omapfb.mode=dvi:${dvimode} " \
	201	"omapfb.debug=y " \
	202	"omapdss.def_disp=${defaultdisplay} " \
	203	"root=${nandroot} " \
	204	"rootfstype=${nandrootfstype}\0" \
	205	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	206	"bootscript=echo Running bootscript from mmc ...; " \
	207	"source ${loadaddr}\0" \
	208	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	209	"mmcboot=echo Booting from mmc ...; " \
	210	"run mmcargs; " \
	211	"bootm ${loadaddr}\0" \
	212	"nandboot=echo Booting from nand ...; " \
	213	"run nandargs; " \
0b800a6b	214	"nand read ${loadaddr} 2a0000 400000; " \
36b4e2dd MR	215	"bootm ${loadaddr}\0" \
	216
	217	#define CONFIG_BOOTCOMMAND \
66968110	218	"mmc dev ${mmcdev}; if mmc rescan; then " \
36b4e2dd MR	219	"if run loadbootscript; then " \
	220	"run bootscript; " \
	221	"else " \
	222	"if run loaduimage; then " \
	223	"run mmcboot; " \
	224	"else run nandboot; " \
	225	"fi; " \
	226	"fi; " \
	227	"else run nandboot; fi"
	228
36b4e2dd MR	229	/*
	230	* Miscellaneous configurable options
	231	*/
41d7e702 IG	232	#define CONFIG_AUTO_COMPLETE
	233	#define CONFIG_CMDLINE_EDITING
	234	#define CONFIG_TIMESTAMP
9fc376be	235	#define CONFIG_SYS_AUTOLOAD "no"
36b4e2dd MR	236	#define CONFIG_SYS_LONGHELP /* undef to save memory */
36b4e2dd MR	237	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
b65a77a8	238	#define CONFIG_SYS_PROMPT "CM-T3x # "
36b4e2dd MR	239	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	240	/* Print Buffer Size */
	241	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	242	sizeof(CONFIG_SYS_PROMPT) + 16)
	243	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	244	/* Boot Argument Buffer Size */
	245	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	246
	247	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
	248	/* works on */
	249	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	250	0x01F00000) /* 31MB */
	251
	252	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
	253	/* load address */
	254
	255	/*
	256	* OMAP3 has 12 GP timers, they can be driven by the system clock
	257	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	258	* This rate is divided by a local divisor.
	259	*/
	260	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
	261	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
36b4e2dd	262
36b4e2dd MR	263	/*-----------------------------------------------------------------------
	264	* Physical Memory Map
	265	*/
	266	#define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */
	267	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
36b4e2dd	268
36b4e2dd MR	269	/*-----------------------------------------------------------------------
	270	* FLASH and environment organization
	271	*/
	272
	273	/* ** PISMO SUPPORT * */
36b4e2dd MR	274	/* Configure the PISMO */
36b4e2dd MR	275	#define PISMO1_NAND_SIZE GPMC_SIZE_128M
36b4e2dd MR	276
	277	/* Monitor at start of flash */
	278	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
3530a35d	279	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
36b4e2dd	280
9fc376be	281	#define CONFIG_ENV_IS_IN_NAND
36b4e2dd	282	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
6cbec7b3	283	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
36b4e2dd MR	284	#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
36b4e2dd MR	285
36b4e2dd	286	#if defined(CONFIG_CMD_NET)
36b4e2dd MR	287	#define CONFIG_SMC911X
36b4e2dd MR	288	#define CONFIG_SMC911X_32_BIT
b65a77a8 IG	289	#define CM_T3X_SMC911X_BASE 0x2C000000
	290	#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20))
	291	#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE
36b4e2dd MR	292	#endif /* (CONFIG_CMD_NET) */
	293
	294	/* additions for new relocation code, must be added to all boards */
	295	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	296	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	297	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	298	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	299	CONFIG_SYS_INIT_RAM_SIZE - \
	300	GENERATED_GBL_DATA_SIZE)
	301
2b8754b2	302	/* Status LED */
9fc376be NK	303	#define CONFIG_STATUS_LED /* Status LED enabled */
9fc376be NK	304	#define CONFIG_BOARD_SPECIFIC_LED
2b8754b2 IG	305	#define STATUS_LED_GREEN 0
	306	#define STATUS_LED_BIT STATUS_LED_GREEN
	307	#define STATUS_LED_STATE STATUS_LED_ON
	308	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
	309	#define STATUS_LED_BOOT STATUS_LED_BIT
	310	#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
	311
60e6bdcc NK	312	#define CONFIG_SPLASHIMAGE_GUARD
60e6bdcc NK	313
2b8754b2 IG	314	/* GPIO banks */
2b8754b2 IG	315	#ifdef CONFIG_STATUS_LED
9fc376be	316	#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
2b8754b2 IG	317	#endif
2b8754b2 IG	318
7878ca51 NK	319	/* Display Configuration */
	320	#define CONFIG_OMAP3_GPIO_2
	321	#define CONFIG_VIDEO_OMAP3
	322	#define LCD_BPP LCD_COLOR16
	323
	324	#define CONFIG_LCD
f35034fe NK	325	#define CONFIG_SPLASH_SCREEN
	326	#define CONFIG_CMD_BMP
	327	#define CONFIG_BMP_16BPP
7878ca51	328
36b4e2dd	329	#endif /* __CONFIG_H */