[people/ms/u-boot.git] / include / configs / colibri_vf.h

/*
 * Copyright 2015 Toradex, Inc.
 *
 * Configuration settings for the Toradex VF50/VF61 module.
 *
 * Based on vf610twr.h:
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

#define CONFIG_VF610
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_FSL_CLK

#define CONFIG_ARCH_MISC_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_FSL_LPUART
#define LPUART_BASE			UART0_BASE

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_VERSION_VARIABLE
#define CONFIG_SYS_UART_PORT		(0)
#define CONFIG_BAUDRATE			115200
#define CONFIG_CMD_ASKENV

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* GPIO support */
#define CONFIG_DM_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_VYBRID_GPIO

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nand0=vf610_nfc"
#define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
				"128k(vf-bcb)ro,"		\
				"1408k(u-boot)ro,"		\
				"512k(u-boot-env),"		\
				"-(ubi)"

#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_SYS_FSL_ERRATUM_ESDHC111

#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT3
#define CONFIG_CMD_EXT4
#define CONFIG_DOS_PARTITION

#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_UBI
#define CONFIG_MTD_UBI_FASTMAP
#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET1_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_IPADDR		192.168.10.2
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_SERVERIP		192.168.10.1

#define CONFIG_BOOTDELAY		1
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_LOADADDR			0x80008000
#define CONFIG_FDTADDR			0x84000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	"dhcp ${kernel_addr_r} && "	\
	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define UBI_BOOTCMD	\
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"kernel_file=zImage\0" \
	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	"fdt_board=eval-v3\0" \
	"defargs=\0" \
	"console=ttyLP0\0" \
	"setup=setenv setupargs " \
	"console=tty1 console=${console}" \
	",${baudrate}n8 ${memargs}\0" \
	"setsdupdate=mmc rescan && set interface mmc && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setusbupdate=usb start && set interface usb && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setupdate=run setsdupdate || run setusbupdate\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
	SD_BOOTCMD \
	NFS_BOOTCMD \
	UBI_BOOTCMD

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_SYS_NO_FLASH

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_RANGE		(4 * 64 * 2048)
#define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
#endif

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#define CONFIG_SYS_NO_FLASH

#define CONFIG_SYS_CACHELINE_SIZE 32

/* USB Host Support */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

/* USB Client Support */
#define CONFIG_USB_GADGET
#define CONFIG_CI_UDC
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW      2
#define CONFIG_TRDX_VID                  0x1B67
#define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
#define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
#define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
#define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
#define CONFIG_G_DNL_MANUFACTURER        "Toradex"
#define CONFIG_G_DNL_VENDOR_NUM          CONFIG_TRDX_VID
#define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50

/* USB DFU */
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_CMD_DFU
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_NAND
#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)

/* USB Storage */
#define CONFIG_USB_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE

/* Enable SPI support */
#ifdef CONFIG_OF_CONTROL
#define CONFIG_DM_SPI
#define CONFIG_CMD_SPI
#define CONFIG_FSL_DSPI
#endif

#endif /* __CONFIG_H */
Commit	Line	Data
e7b860fa SM	1	/*
	2	* Copyright 2015 Toradex, Inc.
	3	*
	4	* Configuration settings for the Toradex VF50/VF61 module.
	5	*
	6	* Based on vf610twr.h:
	7	* Copyright 2013 Freescale Semiconductor, Inc.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	#include <asm/arch/imx-regs.h>
e7b860fa SM	16
	17	#define CONFIG_VF610
	18	#define CONFIG_SYS_THUMB_BUILD
	19	#define CONFIG_USE_ARCH_MEMCPY
	20	#define CONFIG_USE_ARCH_MEMSET
677f970b	21	#define CONFIG_FSL_CLK
e7b860fa	22
e7b860fa SM	23	#define CONFIG_ARCH_MISC_INIT
	24	#define CONFIG_DISPLAY_CPUINFO
	25	#define CONFIG_DISPLAY_BOARDINFO
	26
	27	#define CONFIG_SKIP_LOWLEVEL_INIT
	28
	29	#define CONFIG_CMD_FUSE
	30	#ifdef CONFIG_CMD_FUSE
	31	#define CONFIG_MXC_OCOTP
	32	#endif
	33
	34	/* Size of malloc() pool */
	35	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	36
	37	#define CONFIG_BOARD_EARLY_INIT_F
	38
	39	#define CONFIG_FSL_LPUART
	40	#define LPUART_BASE UART0_BASE
	41
	42	/* Allow to overwrite serial and ethaddr */
	43	#define CONFIG_ENV_OVERWRITE
	44	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	45	#define CONFIG_VERSION_VARIABLE
	46	#define CONFIG_SYS_UART_PORT (0)
	47	#define CONFIG_BAUDRATE 115200
	48	#define CONFIG_CMD_ASKENV
	49
	50	/* NAND support */
	51	#define CONFIG_CMD_NAND
8fca2d8c	52	#define CONFIG_SYS_NAND_ONFI_DETECTION
e7b860fa SM	53	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	54	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	55
30748d81 BD	56	/* GPIO support */
	57	#define CONFIG_DM_GPIO
	58	#define CONFIG_CMD_GPIO
	59	#define CONFIG_VYBRID_GPIO
	60
e7b860fa SM	61	/* Dynamic MTD partition support */
	62	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	63	#define CONFIG_MTD_PARTITIONS
	64	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	65	#define MTDIDS_DEFAULT "nand0=vf610_nfc"
	66	#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
	67	"128k(vf-bcb)ro," \
	68	"1408k(u-boot)ro," \
	69	"512k(u-boot-env)," \
	70	"-(ubi)"
	71
e7b860fa SM	72	#define CONFIG_MMC
	73	#define CONFIG_FSL_ESDHC
	74	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	75	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	76
	77	#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
	78
	79	#define CONFIG_CMD_MMC
	80	#define CONFIG_GENERIC_MMC
	81	#define CONFIG_CMD_FAT
	82	#define CONFIG_CMD_EXT3
	83	#define CONFIG_CMD_EXT4
	84	#define CONFIG_DOS_PARTITION
	85
	86	#define CONFIG_RBTREE
	87	#define CONFIG_LZO
	88	#define CONFIG_CMD_FS_GENERIC
	89	#define CONFIG_CMD_BOOTZ
	90	#define CONFIG_CMD_UBI
	91	#define CONFIG_MTD_UBI_FASTMAP
	92	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
	93
	94	#define CONFIG_CMD_PING
	95	#define CONFIG_CMD_DHCP
	96	#define CONFIG_CMD_MII
e7b860fa SM	97	#define CONFIG_FEC_MXC
	98	#define CONFIG_MII
	99	#define IMX_FEC_BASE ENET1_BASE_ADDR
	100	#define CONFIG_FEC_XCV_TYPE RMII
	101	#define CONFIG_FEC_MXC_PHYADDR 0
	102	#define CONFIG_PHYLIB
	103	#define CONFIG_PHY_MICREL
	104
	105	#define CONFIG_IPADDR 192.168.10.2
	106	#define CONFIG_NETMASK 255.255.255.0
	107	#define CONFIG_SERVERIP 192.168.10.1
	108
	109	#define CONFIG_BOOTDELAY 1
	110	#define CONFIG_BOARD_LATE_INIT
	111
	112	#define CONFIG_LOADADDR 0x80008000
	113	#define CONFIG_FDTADDR 0x84000000
	114
	115	/* We boot from the gfxRAM area of the OCRAM. */
	116	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	117	#define CONFIG_BOARD_SIZE_LIMIT 524288
	118
	119	#define SD_BOOTCMD \
	120	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	121	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	122	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	123	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	124	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	125	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	126
	127	#define NFS_BOOTCMD \
	128	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	129	"nfsboot=run setup; " \
	130	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	131	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	132	"dhcp ${kernel_addr_r} && " \
	133	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	134	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	135
	136	#define UBI_BOOTCMD \
	137	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	138	"ubi.fm_autoconvert=1\0" \
	139	"ubiboot=run setup; " \
	140	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
	141	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	142	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	143	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	144	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	145	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	146
	147	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
	148
bba97cd2 SM	149	#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
bba97cd2 SM	150
e7b860fa SM	151	#define CONFIG_EXTRA_ENV_SETTINGS \
	152	"kernel_addr_r=0x82000000\0" \
	153	"fdt_addr_r=0x84000000\0" \
	154	"kernel_file=zImage\0" \
	155	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	156	"fdt_board=eval-v3\0" \
	157	"defargs=\0" \
	158	"console=ttyLP0\0" \
	159	"setup=setenv setupargs " \
	160	"console=tty1 console=${console}" \
	161	",${baudrate}n8 ${memargs}\0" \
	162	"setsdupdate=mmc rescan && set interface mmc && " \
	163	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	164	"source ${loadaddr}\0" \
	165	"setusbupdate=usb start && set interface usb && " \
	166	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	167	"source ${loadaddr}\0" \
	168	"setupdate=run setsdupdate \|\| run setusbupdate\0" \
	169	"mtdparts=" MTDPARTS_DEFAULT "\0" \
bba97cd2	170	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
e7b860fa SM	171	SD_BOOTCMD \
	172	NFS_BOOTCMD \
	173	UBI_BOOTCMD
	174
	175	/* Miscellaneous configurable options */
	176	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	177	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	178	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
e7b860fa	179	#undef CONFIG_AUTO_COMPLETE
aa5a0d98	180	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
e7b860fa SM	181	#define CONFIG_SYS_PBSIZE \
	182	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	183	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	184	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	185
	186	#define CONFIG_CMD_MEMTEST
	187	#define CONFIG_SYS_MEMTEST_START 0x80010000
	188	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	189
	190	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	191	#define CONFIG_SYS_HZ 1000
	192	#define CONFIG_CMDLINE_EDITING
	193
	194	/*
	195	* Stack sizes
	196	* The stack sizes are set up in start.S using the settings below
	197	*/
	198	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	199
	200	/* Physical memory map */
	201	#define CONFIG_NR_DRAM_BANKS 1
	202	#define PHYS_SDRAM (0x80000000)
	203	#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
	204
	205	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	206	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	207	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	208
	209	#define CONFIG_SYS_INIT_SP_OFFSET \
	210	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	211	#define CONFIG_SYS_INIT_SP_ADDR \
	212	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	213
	214	/* Environment organization */
	215	#define CONFIG_SYS_NO_FLASH
	216
	217	#ifdef CONFIG_ENV_IS_IN_MMC
	218	#define CONFIG_SYS_MMC_ENV_DEV 0
	219	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	220	#define CONFIG_ENV_SIZE (8 * 1024)
	221	#endif
	222
	223	#ifdef CONFIG_ENV_IS_IN_NAND
	224	#define CONFIG_ENV_SIZE (64 * 2048)
	225	#define CONFIG_ENV_RANGE (4 * 64 * 2048)
	226	#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
	227	#endif
	228
	229	#define CONFIG_OF_LIBFDT
	230	#define CONFIG_CMD_BOOTZ
	231
	232	#define CONFIG_SYS_NO_FLASH
	233
	234	#define CONFIG_SYS_CACHELINE_SIZE 32
	235
bba97cd2 SM	236	/* USB Host Support */
	237	#define CONFIG_CMD_USB
	238	#define CONFIG_USB_EHCI
	239	#define CONFIG_USB_EHCI_VF
	240	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	241	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	242
	243	/* USB Client Support */
	244	#define CONFIG_USB_GADGET
	245	#define CONFIG_CI_UDC
	246	#define CONFIG_USB_GADGET_DUALSPEED
	247	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	248	#define CONFIG_TRDX_VID 0x1B67
	249	#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
	250	#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
	251	#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
	252	#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
	253	#define CONFIG_G_DNL_MANUFACTURER "Toradex"
	254	#define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID
	255	#define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50
	256
	257	/* USB DFU */
01acd6ab	258	#define CONFIG_USB_GADGET_DOWNLOAD
bba97cd2	259	#define CONFIG_CMD_DFU
01acd6ab	260	#define CONFIG_USB_FUNCTION_DFU
bba97cd2 SM	261	#define CONFIG_DFU_NAND
	262	#define CONFIG_DFU_MMC
	263	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
	264
	265	/* USB Storage */
	266	#define CONFIG_USB_STORAGE
01acd6ab	267	#define CONFIG_USB_FUNCTION_MASS_STORAGE
bba97cd2 SM	268	#define CONFIG_CMD_USB_MASS_STORAGE
bba97cd2 SM	269
98e3fd3d BD	270	/* Enable SPI support */
	271	#ifdef CONFIG_OF_CONTROL
	272	#define CONFIG_DM_SPI
	273	#define CONFIG_CMD_SPI
	274	#define CONFIG_FSL_DSPI
	275	#endif
	276
e7b860fa	277	#endif /* __CONFIG_H */