[people/ms/u-boot.git] / include / configs / db-88f6820-gp.h

/*
 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DB_88F6820_GP_H
#define _CONFIG_DB_88F6820_GP_H

/*
 * High Level Configuration Options (easy to change)
 */

#define CONFIG_DISPLAY_BOARDINFO_LATE

/*
 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
 * for DDR ECC byte filling in the SPL before loading the main
 * U-Boot into it.
 */
#define	CONFIG_SYS_TEXT_BASE	0x00800000
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_PCI
#define CONFIG_SCSI

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE		0x0
#define CONFIG_SYS_I2C_SPEED		100000

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3

/*
 * SDIO/MMC Card Configuration
 */
#define CONFIG_MMC
#define CONFIG_MMC_SDMA
#define CONFIG_GENERIC_MMC
#define CONFIG_SDHCI
#define CONFIG_MV_SDHCI
#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

/* Partition support */
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/* Additional FS support/configuration */
#define CONFIG_SUPPORT_VFAT

/* USB/EHCI configuration */
#define CONFIG_EHCI_IS_TDI

/* Environment in SPI NOR flash */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */

#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

/* PCIe support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_PCI_MVEBU
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#endif

#define CONFIG_SYS_ALT_MEMTEST

/* Keep device tree and initrd in lower memory so the kernel can access them */
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"fdt_high=0x10000000\0"		\
	"initrd_high=0x10000000\0"

/* SPL */
/*
 * Select the boot device here
 *
 * Currently supported are:
 * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
 * SPL_BOOT_SDIO_MMC_CARD	- Booting via SDIO/MMC card (partition 1)
 */
#define SPL_BOOT_SPI_NOR_FLASH		1
#define SPL_BOOT_SDIO_MMC_CARD		2
#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SPI_NOR_FLASH

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_SIZE			(140 << 10)
#define CONFIG_SPL_TEXT_BASE		0x40000030
#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)

#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_SIMPLE
#endif

#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)

#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
/* SPL related SPI defines */
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
#endif

#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
/* SPL related MMC defines */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
#define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
#define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	(CONFIG_SYS_U_BOOT_OFFS / 512)
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	((512 << 10) / 512) /* 512KiB */
#ifdef CONFIG_SPL_BUILD
#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
#endif
#endif

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

#endif /* _CONFIG_DB_88F6820_GP_H */
Commit	Line	Data
2bae75a4 SR	1	/*
	2	* Copyright (C) 2014 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_DB_88F6820_GP_H
	8	#define _CONFIG_DB_88F6820_GP_H
	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
2bae75a4	13
2bae75a4 SR	14	#define CONFIG_DISPLAY_BOARDINFO_LATE
2bae75a4 SR	15
2923c2d2 SR	16	/*
	17	* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
	18	* for DDR ECC byte filling in the SPL before loading the main
	19	* U-Boot into it.
	20	*/
	21	#define CONFIG_SYS_TEXT_BASE 0x00800000
2bae75a4 SR	22	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	23
	24	/*
	25	* Commands configuration
	26	*/
	27	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
2bae75a4	28	#define CONFIG_CMD_ENV
ce2cb1d3	29	#define CONFIG_CMD_PCI
c649e3c9	30	#define CONFIG_SCSI
2bae75a4 SR	31
	32	/* I2C */
	33	#define CONFIG_SYS_I2C
	34	#define CONFIG_SYS_I2C_MVTWSI
	35	#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
	36	#define CONFIG_SYS_I2C_SLAVE 0x0
	37	#define CONFIG_SYS_I2C_SPEED 100000
	38
	39	/* SPI NOR flash default params, used by sf commands */
	40	#define CONFIG_SF_DEFAULT_SPEED 1000000
	41	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
2bae75a4	42
e80f1e85 SR	43	/*
	44	* SDIO/MMC Card Configuration
	45	*/
	46	#define CONFIG_MMC
	47	#define CONFIG_MMC_SDMA
	48	#define CONFIG_GENERIC_MMC
	49	#define CONFIG_SDHCI
	50	#define CONFIG_MV_SDHCI
	51	#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
	52
7cbaff95 SR	53	/*
	54	* SATA/SCSI/AHCI configuration
	55	*/
	56	#define CONFIG_LIBATA
	57	#define CONFIG_SCSI_AHCI
	58	#define CONFIG_SCSI_AHCI_PLAT
	59	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	60	#define CONFIG_SYS_SCSI_MAX_LUN 1
	61	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	62	CONFIG_SYS_SCSI_MAX_LUN)
	63
e80f1e85 SR	64	/* Partition support */
	65	#define CONFIG_DOS_PARTITION
	66	#define CONFIG_EFI_PARTITION
	67
	68	/* Additional FS support/configuration */
	69	#define CONFIG_SUPPORT_VFAT
	70
59565736	71	/* USB/EHCI configuration */
59565736 SR	72	#define CONFIG_EHCI_IS_TDI
59565736 SR	73
2bae75a4 SR	74	/* Environment in SPI NOR flash */
	75	#define CONFIG_ENV_IS_IN_SPI_FLASH
	76	#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
	77	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	78	#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
	79
	80	#define CONFIG_PHY_MARVELL /* there is a marvell phy */
2bae75a4 SR	81	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
2bae75a4 SR	82
ce2cb1d3	83	/* PCIe support */
6451223a	84	#ifndef CONFIG_SPL_BUILD
ce2cb1d3 SR	85	#define CONFIG_PCI_MVEBU
	86	#define CONFIG_PCI_PNP
	87	#define CONFIG_PCI_SCAN_SHOW
6451223a	88	#endif
ce2cb1d3	89
2bae75a4 SR	90	#define CONFIG_SYS_ALT_MEMTEST
2bae75a4 SR	91
3fd38af7 KS	92	/* Keep device tree and initrd in lower memory so the kernel can access them */
	93	#define CONFIG_EXTRA_ENV_SETTINGS \
	94	"fdt_high=0x10000000\0" \
	95	"initrd_high=0x10000000\0"
	96
9e30b31d	97	/* SPL */
7853c508 SR	98	/*
	99	* Select the boot device here
	100	*
	101	* Currently supported are:
	102	* SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
	103	* SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
	104	*/
	105	#define SPL_BOOT_SPI_NOR_FLASH 1
	106	#define SPL_BOOT_SDIO_MMC_CARD 2
	107	#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
	108
9e30b31d SR	109	/* Defines for SPL */
	110	#define CONFIG_SPL_FRAMEWORK
	111	#define CONFIG_SPL_SIZE (140 << 10)
	112	#define CONFIG_SPL_TEXT_BASE 0x40000030
	113	#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
	114
	115	#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
	116	#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
	117
6451223a SR	118	#ifdef CONFIG_SPL_BUILD
	119	#define CONFIG_SYS_MALLOC_SIMPLE
	120	#endif
9e30b31d SR	121
	122	#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
	123	#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
	124
7853c508	125	#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
9e30b31d	126	/* SPL related SPI defines */
9e30b31d	127	#define CONFIG_SPL_SPI_LOAD
09a54c00	128	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
7853c508 SR	129	#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
	130	#endif
	131
	132	#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
	133	/* SPL related MMC defines */
7853c508 SR	134	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
	135	#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
	136	#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
	137	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
	138	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */
	139	#ifdef CONFIG_SPL_BUILD
	140	#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
	141	#endif
	142	#endif
9e30b31d	143
2bae75a4 SR	144	/*
	145	* mv-common.h should be defined after CMD configs since it used them
	146	* to enable certain macros
	147	*/
	148	#include "mv-common.h"
	149
	150	#endif /* _CONFIG_DB_88F6820_GP_H */