]>
Commit | Line | Data |
---|---|---|
a0a868b2 WS |
1 | /* |
2 | * (C) Copyright 2011 | |
3 | * Jason Cooper <u-boot@lakedaemon.net> | |
4 | * | |
5 | * Based on work by: | |
6 | * Marvell Semiconductor <www.marvell.com> | |
7 | * Written-by: Siddarth Gore <gores@marvell.com> | |
8 | * | |
9 | * SPDX-License-Identifier: GPL-2.0+ | |
10 | */ | |
11 | ||
12 | #ifndef _CONFIG_DS109_H | |
13 | #define _CONFIG_DS109_H | |
14 | ||
15 | /* | |
16 | * FIXME: This belongs in mach-types.h. However, we only pull mach-types | |
17 | * from Linus' kernel.org tree. This hasn't been updated primarily due to | |
18 | * the recent arch/arm reshuffling. So, in the meantime, we'll place it | |
19 | * here. | |
20 | */ | |
21 | #include <asm/mach-types.h> | |
22 | #ifdef MACH_TYPE_SYNOLOGY | |
23 | #error "MACH_TYPE_SYNOLOGY has been defined properly, please remove this." | |
24 | #else | |
25 | #define MACH_TYPE_SYNOLOGY 527 | |
26 | #endif | |
27 | ||
28 | /* | |
29 | * High Level Configuration Options (easy to change) | |
30 | */ | |
31 | #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ | |
32 | #define CONFIG_MACH_TYPE MACH_TYPE_SYNOLOGY | |
33 | ||
34 | /* | |
35 | * Commands configuration | |
36 | */ | |
37 | #define CONFIG_CMD_EXT2 | |
38 | #define CONFIG_CMD_FAT | |
39 | ||
40 | /* | |
41 | * mv-plug-common.h should be defined after CMD configs since it used them | |
42 | * to enable certain macros | |
43 | */ | |
44 | #include "mv-plug-common.h" | |
45 | ||
46 | /* | |
47 | * Environment variables configurations | |
48 | */ | |
49 | #ifdef CONFIG_SPI_FLASH | |
50 | #define CONFIG_ENV_IS_IN_SPI_FLASH 1 | |
51 | #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ | |
52 | #else | |
53 | #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ | |
54 | #endif | |
55 | ||
56 | #ifdef CONFIG_CMD_SF | |
57 | #define CONFIG_HARD_SPI 1 | |
58 | #define CONFIG_KIRKWOOD_SPI 1 | |
59 | #define CONFIG_ENV_SPI_BUS 0 | |
60 | #define CONFIG_ENV_SPI_CS 0 | |
61 | #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ | |
62 | #endif | |
63 | ||
64 | /* | |
65 | * max 4k env size is enough, but in case of nand | |
66 | * it has to be rounded to sector size | |
67 | */ | |
68 | #define CONFIG_ENV_SIZE 0x10000 | |
69 | #define CONFIG_ENV_ADDR 0x3d0000 | |
70 | #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ | |
71 | ||
72 | /* | |
73 | * Default environment variables | |
74 | */ | |
75 | #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ | |
76 | "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ | |
77 | "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ | |
78 | "bootm 0x6400000;" | |
79 | ||
80 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
81 | "x_bootcmd_ethernet=ping 192.168.1.2\0" \ | |
82 | "x_bootcmd_usb=usb start\0" \ | |
83 | "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ | |
84 | "x_bootargs=console=ttyS0,115200\0" \ | |
85 | "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ | |
86 | "ipaddr=192.168.1.5\0" | |
87 | ||
88 | /* | |
89 | * Ethernet Driver configuration | |
90 | */ | |
91 | #ifdef CONFIG_CMD_NET | |
92 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ | |
93 | #define CONFIG_PHY_BASE_ADR 8 | |
94 | #endif /* CONFIG_CMD_NET */ | |
95 | ||
96 | /* | |
97 | * SATA Driver configuration | |
98 | */ | |
99 | #ifdef CONFIG_MVSATA_IDE | |
100 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET | |
101 | #endif /*CONFIG_MVSATA_IDE*/ | |
102 | ||
103 | #endif /* _CONFIG_DS109_H */ |