include/configs/ds109.h

   1 /*
   2  * (C) Copyright 2011
   3  * Jason Cooper <u-boot@lakedaemon.net>
   4  *
   5  * Based on work by:
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Siddarth Gore <gores@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_DS109_H
  13 #define _CONFIG_DS109_H
  14
  15 /*
  16  * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
  17  * from Linus' kernel.org tree.  This hasn't been updated primarily due to
  18  * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
  19  * here.
  20  */
  21 #include <asm/mach-types.h>
  22 #ifdef MACH_TYPE_SYNOLOGY
  23 #error "MACH_TYPE_SYNOLOGY has been defined properly, please remove this."
  24 #else
  25 #define MACH_TYPE_SYNOLOGY             527
  26 #endif
  27
  28 /*
  29  * High Level Configuration Options (easy to change)
  30  */
  31 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  32 #define CONFIG_MACH_TYPE        MACH_TYPE_SYNOLOGY
  33
  34 /*
  35  * Commands configuration
  36  */
  37 #define CONFIG_CMD_EXT2
  38 #define CONFIG_CMD_FAT
  39
  40 /*
  41  * mv-plug-common.h should be defined after CMD configs since it used them
  42  * to enable certain macros
  43  */
  44 #include "mv-plug-common.h"
  45
  46 /*
  47  *  Environment variables configurations
  48  */
  49 #ifdef CONFIG_SPI_FLASH
  50 #define CONFIG_ENV_IS_IN_SPI_FLASH      1
  51 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  52 #else
  53 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  54 #endif
  55
  56 #ifdef CONFIG_CMD_SF
  57 #define CONFIG_HARD_SPI                 1
  58 #define CONFIG_KIRKWOOD_SPI             1
  59 #define CONFIG_ENV_SPI_BUS              0
  60 #define CONFIG_ENV_SPI_CS               0
  61 #define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  62 #endif
  63
  64 /*
  65  * max 4k env size is enough, but in case of nand
  66  * it has to be rounded to sector size
  67  */
  68 #define CONFIG_ENV_SIZE                 0x10000
  69 #define CONFIG_ENV_ADDR                 0x3d0000
  70 #define CONFIG_ENV_OFFSET               0x3d0000 /* env starts here */
  71
  72 /*
  73  * Default environment variables
  74  */
  75 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  76         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  77         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  78         "bootm 0x6400000;"
  79
  80 #define CONFIG_EXTRA_ENV_SETTINGS       \
  81         "x_bootcmd_ethernet=ping 192.168.1.2\0" \
  82         "x_bootcmd_usb=usb start\0"     \
  83         "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  84         "x_bootargs=console=ttyS0,115200\0"     \
  85         "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
  86         "ipaddr=192.168.1.5\0"
  87
  88 /*
  89  * Ethernet Driver configuration
  90  */
  91 #ifdef CONFIG_CMD_NET
  92 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable one port */
  93 #define CONFIG_PHY_BASE_ADR     8
  94 #endif /* CONFIG_CMD_NET */
  95
  96 /*
  97  * SATA Driver configuration
  98  */
  99 #ifdef CONFIG_MVSATA_IDE
 100 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 101 #endif /*CONFIG_MVSATA_IDE*/
 102
 103 #endif /* _CONFIG_DS109_H */