projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 6d1d5cf9 NI |
1 | /* |
| 2 | * Configuation settings for the Renesas Solutions ECOVEC board | |
| 3 | * | |
| 4 | * Copyright (C) 2009 - 2011 Renesas Solutions Corp. | |
| 5 | * Copyright (C) 2009 Kuninori Morimoto <morimoto.kuninori@renesas.com> | |
| 6 | * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> | |
| 7 | * | |
| 1a459660 | 8 | * SPDX-License-Identifier: GPL-2.0+ |
| 6d1d5cf9 NI |
9 | */ |
| 10 | ||
| 11 | #ifndef __ECOVEC_H | |
| 12 | #define __ECOVEC_H | |
| 13 | ||
| 14 | /* | |
| 15 | * Address Interface BusWidth | |
| 16 | *----------------------------------------- | |
| 17 | * 0x0000_0000 U-Boot 16bit | |
| 18 | * 0x0004_0000 Linux romImage 16bit | |
| 19 | * 0x0014_0000 MTD for Linux 16bit | |
| 20 | * 0x0400_0000 Internal I/O 16/32bit | |
| 21 | * 0x0800_0000 DRAM 32bit | |
| 22 | * 0x1800_0000 MFI 16bit | |
| 23 | */ | |
| 24 | ||
| 25 | #undef DEBUG | |
| 26 | #define CONFIG_SH 1 | |
| 27 | #define CONFIG_SH4 1 | |
| 28 | #define CONFIG_SH4A 1 | |
| 29 | #define CONFIG_CPU_SH7724 1 | |
| 77fe6e77 | 30 | #define CONFIG_BOARD_LATE_INIT 1 |
| 6d1d5cf9 NI |
31 | #define CONFIG_ECOVEC 1 |
| 32 | ||
| 33 | #define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000 | |
| 34 | #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 | |
| 35 | ||
| 36 | #define CONFIG_CMD_FLASH | |
| 37 | #define CONFIG_CMD_MEMORY | |
| 38 | #define CONFIG_CMD_NET | |
| 39 | #define CONFIG_CMD_PING | |
| 40 | #define CONFIG_CMD_MII | |
| 41 | #define CONFIG_CMD_NFS | |
| 42 | #define CONFIG_CMD_SDRAM | |
| 43 | #define CONFIG_CMD_ENV | |
| 44 | #define CONFIG_CMD_USB | |
| 45 | #define CONFIG_CMD_FAT | |
| 46 | #define CONFIG_CMD_EXT2 | |
| 47 | #define CONFIG_CMD_SAVEENV | |
| 48 | ||
| 49 | #define CONFIG_USB_STORAGE | |
| 50 | #define CONFIG_DOS_PARTITION | |
| 51 | ||
| 52 | #define CONFIG_BAUDRATE 115200 | |
| 53 | #define CONFIG_BOOTDELAY 3 | |
| 54 | #define CONFIG_BOOTARGS "console=ttySC0,115200" | |
| 55 | ||
| 56 | #define CONFIG_VERSION_VARIABLE | |
| 57 | #undef CONFIG_SHOW_BOOT_PROGRESS | |
| 58 | ||
| 59 | /* I2C */ | |
| 60 | #define CONFIG_CMD_I2C | |
| 61 | #define CONFIG_SH_I2C 1 | |
| 62 | #define CONFIG_HARD_I2C 1 | |
| 63 | #define CONFIG_I2C_MULTI_BUS 1 | |
| 64 | #define CONFIG_SYS_MAX_I2C_BUS 2 | |
| 65 | #define CONFIG_SYS_I2C_MODULE 1 | |
| 66 | #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ | |
| 67 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| 68 | #define CONFIG_SH_I2C_DATA_HIGH 4 | |
| 69 | #define CONFIG_SH_I2C_DATA_LOW 5 | |
| 70 | #define CONFIG_SH_I2C_CLOCK 41666666 | |
| 71 | #define CONFIG_SH_I2C_BASE0 0xA4470000 | |
| 72 | #define CONFIG_SH_I2C_BASE1 0xA4750000 | |
| 73 | ||
| 74 | /* Ether */ | |
| 6d1d5cf9 NI |
75 | #define CONFIG_SH_ETHER 1 |
| 76 | #define CONFIG_SH_ETHER_USE_PORT (0) | |
| 77 | #define CONFIG_SH_ETHER_PHY_ADDR (0x1f) | |
| e50edf90 | 78 | #define CONFIG_PHY_SMSC 1 |
| 6d1d5cf9 NI |
79 | #define CONFIG_PHYLIB |
| 80 | #define CONFIG_BITBANGMII | |
| 81 | #define CONFIG_BITBANGMII_MULTI | |
| a80a6619 | 82 | #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII |
| 6d1d5cf9 NI |
83 | |
| 84 | /* USB / R8A66597 */ | |
| 85 | #define CONFIG_USB_R8A66597_HCD | |
| 86 | #define CONFIG_R8A66597_BASE_ADDR 0xA4D80000 | |
| 87 | #define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */ | |
| 88 | #define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */ | |
| 89 | #define CONFIG_R8A66597_ENDIAN 0x0000 /* little */ | |
| 90 | #define CONFIG_SUPERH_ON_CHIP_R8A66597 | |
| 91 | ||
| 92 | /* undef to save memory */ | |
| 93 | #define CONFIG_SYS_LONGHELP | |
| 94 | /* Monitor Command Prompt */ | |
| 6d1d5cf9 NI |
95 | /* Buffer size for input from the Console */ |
| 96 | #define CONFIG_SYS_CBSIZE 256 | |
| 97 | /* Buffer size for Console output */ | |
| 98 | #define CONFIG_SYS_PBSIZE 256 | |
| 99 | /* max args accepted for monitor commands */ | |
| 100 | #define CONFIG_SYS_MAXARGS 16 | |
| 101 | /* Buffer size for Boot Arguments passed to kernel */ | |
| 102 | #define CONFIG_SYS_BARGSIZE 512 | |
| 103 | /* List of legal baudrate settings for this board */ | |
| 104 | #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } | |
| 105 | ||
| 106 | /* SCIF */ | |
| 107 | #define CONFIG_SCIF_CONSOLE 1 | |
| 108 | #define CONFIG_SCIF 1 | |
| 109 | #define CONFIG_CONS_SCIF0 1 | |
| 110 | ||
| 111 | /* Suppress display of console information at boot */ | |
| 112 | #undef CONFIG_SYS_CONSOLE_INFO_QUIET | |
| 113 | #undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE | |
| 114 | #undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE | |
| 115 | ||
| 116 | /* SDRAM */ | |
| 117 | #define CONFIG_SYS_SDRAM_BASE (0x88000000) | |
| 118 | #define CONFIG_SYS_SDRAM_SIZE (256 * 1024 * 1024) | |
| 119 | #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) | |
| 120 | ||
| 121 | #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) | |
| 122 | #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 200 * 1024 * 1024) | |
| 123 | /* Enable alternate, more extensive, memory test */ | |
| 124 | #undef CONFIG_SYS_ALT_MEMTEST | |
| 125 | /* Scratch address used by the alternate memory test */ | |
| 126 | #undef CONFIG_SYS_MEMTEST_SCRATCH | |
| 127 | ||
| 128 | /* Enable temporary baudrate change while serial download */ | |
| 129 | #undef CONFIG_SYS_LOADS_BAUD_CHANGE | |
| 130 | ||
| 131 | /* FLASH */ | |
| 132 | #define CONFIG_FLASH_CFI_DRIVER 1 | |
| 133 | #define CONFIG_SYS_FLASH_CFI | |
| 134 | #undef CONFIG_SYS_FLASH_QUIET_TEST | |
| 135 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 136 | #define CONFIG_SYS_FLASH_BASE (0xA0000000) | |
| 137 | #define CONFIG_SYS_MAX_FLASH_SECT 512 | |
| 138 | ||
| 139 | /* if you use all NOR Flash , you change dip-switch. Please see Manual. */ | |
| 140 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
| 141 | #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } | |
| 142 | ||
| 143 | /* Timeout for Flash erase operations (in ms) */ | |
| 144 | #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) | |
| 145 | /* Timeout for Flash write operations (in ms) */ | |
| 146 | #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) | |
| 147 | /* Timeout for Flash set sector lock bit operations (in ms) */ | |
| 148 | #define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) | |
| 149 | /* Timeout for Flash clear lock bit operations (in ms) */ | |
| 150 | #define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) | |
| 151 | ||
| 152 | /* | |
| 153 | * Use hardware flash sectors protection instead | |
| 154 | * of U-Boot software protection | |
| 155 | */ | |
| 156 | #undef CONFIG_SYS_FLASH_PROTECTION | |
| 157 | #undef CONFIG_SYS_DIRECT_FLASH_TFTP | |
| 158 | ||
| 159 | /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ | |
| 160 | #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) | |
| 161 | /* Monitor size */ | |
| 162 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) | |
| 163 | /* Size of DRAM reserved for malloc() use */ | |
| 164 | #define CONFIG_SYS_MALLOC_LEN (256 * 1024) | |
| 165 | /* size in bytes reserved for initial data */ | |
| 166 | #define CONFIG_SYS_GBL_DATA_SIZE (256) | |
| 167 | #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) | |
| 168 | ||
| 169 | /* ENV setting */ | |
| 170 | #define CONFIG_ENV_IS_IN_FLASH | |
| 171 | #define CONFIG_ENV_OVERWRITE 1 | |
| 172 | #define CONFIG_ENV_SECT_SIZE (128 * 1024) | |
| 173 | #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) | |
| 174 | #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) | |
| 175 | /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ | |
| 176 | #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) | |
| 177 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) | |
| 178 | ||
| 179 | /* Board Clock */ | |
| 180 | #define CONFIG_SYS_CLK_FREQ 41666666 | |
| 684a501e NI |
181 | #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ |
| 182 | #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ | |
| 6d1d5cf9 | 183 | #define CONFIG_SYS_TMU_CLK_DIV 4 |
| 6d1d5cf9 NI |
184 | |
| 185 | #endif /* __ECOVEC_H */ |