[people/ms/u-boot.git] / include / configs / grasshopper.h

/*
 * Copyright (C) 2011
 * Corscience GmbH & Co.KG, Andreas Bießmann <biessmann@corscience.de>
 *
 * Configuration settings for the grasshopper (ICnova AP7000) board
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#ifndef __GRASSHOPPER_CONFIG_H
#define __GRASSHOPPER_CONFIG_H

#include <asm/arch/hardware.h>

#define CONFIG_AVR32
#define CONFIG_AT32AP
#define CONFIG_AT32AP7000

/*
 * Timer clock frequency. We're using the CPU-internal COUNT register
 * for this, so this is equivalent to the CPU core clock frequency
 */
#define CONFIG_SYS_HZ			1000

/*
 * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
 * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
 * PLL frequency.
 * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
 */
#define CONFIG_PLL
#define CONFIG_SYS_POWER_MANAGER
#define CONFIG_SYS_OSC0_HZ		20000000
#define CONFIG_SYS_PLL0_DIV		1
#define CONFIG_SYS_PLL0_MUL		7
#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
/*
 * Set the CPU running at:
 * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
 */
#define CONFIG_SYS_CLKDIV_CPU		0
/*
 * Set the HSB running at:
 * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
 */
#define CONFIG_SYS_CLKDIV_HSB		1
/*
 * Set the PBA running at:
 * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
 */
#define CONFIG_SYS_CLKDIV_PBA		2
/*
 * Set the PBB running at:
 * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
 */
#define CONFIG_SYS_CLKDIV_PBB		1

/* Reserve VM regions for SDRAM and NOR flash */
#define CONFIG_SYS_NR_VM_REGIONS	2

/*
 * The PLLOPT register controls the PLL like this:
 *   icp = PLLOPT<2>
 *   ivco = PLLOPT<1:0>
 *
 * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
 */
#define CONFIG_SYS_PLL0_OPT		0x04

#define CONFIG_USART_BASE		ATMEL_BASE_USART1
#define CONFIG_USART_ID			1

/* User serviceable stuff */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

#define CONFIG_STACKSIZE		(2048)

#define CONFIG_BAUDRATE			115200

/*
 * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
 * data on the serial line may interrupt the boot sequence.
 */
#define CONFIG_BOOTDELAY		1
#define CONFIG_AUTOBOOT
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT		"Press SPACE to abort autoboot in %d" \
					" seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR	"d"
#define CONFIG_AUTOBOOT_STOP_STR	" "

/*
 * After booting the board for the first time, new ethernet addresses
 * should be generated and assigned to the environment variables
 * "ethaddr". This is normally done during production.
 */
#define CONFIG_OVERWRITE_ETHADDR_ONCE
#define CONFIG_NET_MULTI

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

/* remove unneeded commands */
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR

/* add useful commands */
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO

#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_PROMPT_HUSH_PS2	"~> "
#define CONFIG_CMDLINE_EDITING

#define CONFIG_ATMEL_USART
#define CONFIG_MACB
#define CONFIG_PORTMUX_PIO
#define CONFIG_SYS_NR_PIOS		5
#define CONFIG_SYS_HSDRAMC

#define CONFIG_SYS_DCACHE_LINESZ	32
#define CONFIG_SYS_ICACHE_LINESZ	32

#define CONFIG_NR_DRAM_BANKS		1

#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER

#define CONFIG_SYS_FLASH_BASE		0x00000000
#define CONFIG_SYS_FLASH_SIZE		0x800000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	135

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_TEXT_BASE		0x00000000

#define CONFIG_SYS_INTRAM_BASE		INTERNAL_SRAM_BASE
#define CONFIG_SYS_INTRAM_SIZE		INTERNAL_SRAM_SIZE
#define CONFIG_SYS_SDRAM_BASE		EBI_SDRAM_BASE

#define CONFIG_ENV_IS_IN_FLASH
/* place u-boot env in flash sector after u-boot */
#define CONFIG_ENV_SIZE			0x10000
#define CONFIG_ENV_ADDR			0x20000

#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + \
					 CONFIG_SYS_INTRAM_SIZE)

#define CONFIG_SYS_MALLOC_LEN		(256*1024)
#define CONFIG_SYS_DMA_ALLOC_LEN	(16384)

/* Allow 4MB for the kernel run-time image */
#define CONFIG_SYS_LOAD_ADDR		(EBI_SDRAM_BASE + 0x00400000)
#define CONFIG_SYS_BOOTPARAMS_LEN	(16 * 1024)

/* Other configuration settings that shouldn't have to change all that often */
#define CONFIG_SYS_PROMPT		"U-Boot> "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					 sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP

#define CONFIG_SYS_MEMTEST_START	EBI_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x700000)
#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 38400, 19200, 9600, 2400 }

#endif /* __GRASSHOPPER_CONFIG_H */
/* vim: set ts=8 noet: */
Commit	Line	Data
ad7a1785 AB	1	/*
	2	* Copyright (C) 2011
	3	* Corscience GmbH & Co.KG, Andreas Bießmann <biessmann@corscience.de>
	4	*
	5	* Configuration settings for the grasshopper (ICnova AP7000) board
	6	*
	7	* See file CREDITS for list of people who contributed to this
	8	* project.
	9	*
	10	* This program is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License as
	12	* published by the Free Software Foundation; either version 2 of
	13	* the License, or (at your option) any later version.
	14	*
	15	* This program is distributed in the hope that it will be useful,
	16	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	18	* GNU General Public License for more details.
	19	*
	20	* You should have received a copy of the GNU General Public License
	21	* along with this program; if not, write to the Free Software
	22	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	23	* MA 02111-1307 USA
	24	*/
	25	#ifndef __GRASSHOPPER_CONFIG_H
	26	#define __GRASSHOPPER_CONFIG_H
	27
	28	#include <asm/arch/hardware.h>
	29
	30	#define CONFIG_AVR32
	31	#define CONFIG_AT32AP
	32	#define CONFIG_AT32AP7000
	33
	34	/*
	35	* Timer clock frequency. We're using the CPU-internal COUNT register
	36	* for this, so this is equivalent to the CPU core clock frequency
	37	*/
	38	#define CONFIG_SYS_HZ 1000
	39
	40	/*
	41	* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
	42	* frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
	43	* PLL frequency.
	44	* (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
	45	*/
	46	#define CONFIG_PLL
	47	#define CONFIG_SYS_POWER_MANAGER
	48	#define CONFIG_SYS_OSC0_HZ 20000000
	49	#define CONFIG_SYS_PLL0_DIV 1
	50	#define CONFIG_SYS_PLL0_MUL 7
	51	#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
	52	/*
	53	* Set the CPU running at:
	54	* PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
	55	*/
	56	#define CONFIG_SYS_CLKDIV_CPU 0
	57	/*
	58	* Set the HSB running at:
	59	* PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
	60	*/
	61	#define CONFIG_SYS_CLKDIV_HSB 1
	62	/*
	63	* Set the PBA running at:
	64	* PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
65	*/
66	#define CONFIG_SYS_CLKDIV_PBA 2
67	/*
68	* Set the PBB running at:
69	* PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
70	*/
71	#define CONFIG_SYS_CLKDIV_PBB 1
72
73	/* Reserve VM regions for SDRAM and NOR flash */
74	#define CONFIG_SYS_NR_VM_REGIONS 2
75
76	/*
77	* The PLLOPT register controls the PLL like this:
78	* icp = PLLOPT<2>
79	* ivco = PLLOPT<1:0>
80	*
81	* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
82	*/
83	#define CONFIG_SYS_PLL0_OPT 0x04
84
85	#define CONFIG_USART_BASE ATMEL_BASE_USART1
86	#define CONFIG_USART_ID 1
87
88	/* User serviceable stuff */
89	#define CONFIG_CMDLINE_TAG
90	#define CONFIG_SETUP_MEMORY_TAGS
91	#define CONFIG_INITRD_TAG
92
93	#define CONFIG_STACKSIZE (2048)
94
95	#define CONFIG_BAUDRATE 115200
96
97	/*
98	* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
99	* data on the serial line may interrupt the boot sequence.
100	*/
101	#define CONFIG_BOOTDELAY 1
102	#define CONFIG_AUTOBOOT
103	#define CONFIG_AUTOBOOT_KEYED
104	#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d" \
105	" seconds\n", bootdelay
106	#define CONFIG_AUTOBOOT_DELAY_STR "d"
107	#define CONFIG_AUTOBOOT_STOP_STR " "
108
109	/*
110	* After booting the board for the first time, new ethernet addresses
111	* should be generated and assigned to the environment variables
112	* "ethaddr". This is normally done during production.
113	*/
114	#define CONFIG_OVERWRITE_ETHADDR_ONCE
115	#define CONFIG_NET_MULTI
116
117	/*
118	* BOOTP options
119	*/
120	#define CONFIG_BOOTP_SUBNETMASK
121	#define CONFIG_BOOTP_GATEWAY
122
123	/*
124	* Command line configuration.
125	*/
126	#include <config_cmd_default.h>
127
128	/* remove unneeded commands */
129	#undef CONFIG_CMD_FPGA
130	#undef CONFIG_CMD_SETGETDCR
131
132	/* add useful commands */
133	#define CONFIG_CMD_ASKENV
134	#define CONFIG_CMD_DHCP
135	#define CONFIG_CMD_JFFS2
136	#define CONFIG_CMD_PING
137	#define CONFIG_CMD_REGINFO
138
139	#define CONFIG_SYS_HUSH_PARSER
140	#define CONFIG_AUTO_COMPLETE
141	#define CONFIG_SYS_PROMPT_HUSH_PS2 "~> "
142	#define CONFIG_CMDLINE_EDITING
143
144	#define CONFIG_ATMEL_USART
145	#define CONFIG_MACB
146	#define CONFIG_PORTMUX_PIO
147	#define CONFIG_SYS_NR_PIOS 5
148	#define CONFIG_SYS_HSDRAMC
149
150	#define CONFIG_SYS_DCACHE_LINESZ 32
151	#define CONFIG_SYS_ICACHE_LINESZ 32
152
153	#define CONFIG_NR_DRAM_BANKS 1
154
155	#define CONFIG_SYS_FLASH_CFI
156	#define CONFIG_FLASH_CFI_DRIVER
157
158	#define CONFIG_SYS_FLASH_BASE 0x00000000
159	#define CONFIG_SYS_FLASH_SIZE 0x800000
160	#define CONFIG_SYS_MAX_FLASH_BANKS 1
161	#define CONFIG_SYS_MAX_FLASH_SECT 135
162
163	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
164	#define CONFIG_SYS_TEXT_BASE 0x00000000
165
166	#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
167	#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
168	#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
169
170	#define CONFIG_ENV_IS_IN_FLASH
171	/* place u-boot env in flash sector after u-boot */
172	#define CONFIG_ENV_SIZE 0x10000
173	#define CONFIG_ENV_ADDR 0x20000
174
175	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + \
176	CONFIG_SYS_INTRAM_SIZE)
177
178	#define CONFIG_SYS_MALLOC_LEN (256*1024)
179	#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
180
181	/* Allow 4MB for the kernel run-time image */
182	#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
183	#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
184
185	/* Other configuration settings that shouldn't have to change all that often */
186	#define CONFIG_SYS_PROMPT "U-Boot> "
187	#define CONFIG_SYS_CBSIZE 256
188	#define CONFIG_SYS_MAXARGS 16
189	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
190	sizeof(CONFIG_SYS_PROMPT) + 16)
191	#define CONFIG_SYS_LONGHELP
192
193	#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
194	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000)
195	#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
196
197	#endif /* __GRASSHOPPER_CONFIG_H */
198	/* vim: set ts=8 noet: */