[people/ms/u-boot.git] / include / configs / gw_ventana.h

/*
 * Copyright (C) 2013 Gateworks Corporation
 *
 * SPDX-License-Identifier: GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SPL */
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
/*
#define CONFIG_SPL_SATA_SUPPORT
*/
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
#define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */

#define CONFIG_MACH_TYPE	4520   /* Gateworks Ventana Platform */

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

/* ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SERIAL_TAG
#define CONFIG_REVISION_TAG

#define CONFIG_SYS_GENERIC_BOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

/* Init Functions */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R

/* GPIO */
#define CONFIG_MXC_GPIO
#define CONFIG_CMD_GPIO

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#ifdef CONFIG_SPI_FLASH

/* SPI */
#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
  #define CONFIG_MXC_SPI
  #define CONFIG_SPI_FLASH_MTD
  #define CONFIG_SPI_FLASH_BAR
  #define CONFIG_SPI_FLASH_WINBOND
  #define CONFIG_SF_DEFAULT_BUS              0
  #define CONFIG_SF_DEFAULT_CS               0
					     /* GPIO 3-19 (21248) */
  #define CONFIG_SF_DEFAULT_SPEED            30000000
  #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
#endif

#else
/* Enable NAND support */
#define CONFIG_CMD_TIME
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#ifdef CONFIG_CMD_NAND
  #define CONFIG_NAND_MXS
  #define CONFIG_SYS_MAX_NAND_DEVICE	1
  #define CONFIG_SYS_NAND_BASE		0x40000000
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_ONFI_DETECTION

  /* DMA stuff, needed for GPMI/MXS NAND support */
  #define CONFIG_APBH_DMA
  #define CONFIG_APBH_DMA_BURST
  #define CONFIG_APBH_DMA_BURST8
#endif

#endif /* CONFIG_SPI_FLASH */

/* Flattened Image Tree Suport */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_GSC			0
#define CONFIG_I2C_PMIC			1
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       1
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER

/* Filesystem support */
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_UBIFS
#define CONFIG_DOS_PARTITION

/*
 * SATA Configs
 */
#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
  #define CONFIG_DWC_AHSATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48
  #define CONFIG_LIBATA
#endif

/*
 * PCI express
 */
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#endif

/*
 * PMIC
 */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
#define CONFIG_POWER_LTC3676
#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c

/* Various command support */
#include <config_cmd_default.h>
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
#define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GSC
#define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_FUSE          /* eFUSE read/write support */
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif


/* Ethernet support */
#define CONFIG_FEC_MXC
#define CONFIG_E1000
#define CONFIG_MII
#define IMX_FEC_BASE             ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE      RGMII
#define CONFIG_FEC_MXC_PHYADDR   0
#define CONFIG_PHYLIB
#define CONFIG_ARP_TIMEOUT       200UL

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
#define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS      0
#define CONFIG_USB_KEYBOARD
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

/* USB Mass Storage Gadget */
#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_VBUS_DRAW    2

/* Netchip IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Gateworks"

/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK          260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* serial console (ttymxc1,115200) */
#define CONFIG_CONS_INDEX              1
#define CONFIG_BAUDRATE                115200

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT	             "Ventana > "
#define CONFIG_SYS_CBSIZE	             1024
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_HWCONFIG

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	           16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
#define CONFIG_SYS_TEXT_BASE	         0x17800000
#define CONFIG_SYS_LOAD_ADDR           0x12000000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH  /* no NOR flash */

/*
 * MTD Command for mtdparts
 */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#ifdef CONFIG_SPI_FLASH
#define MTDIDS_DEFAULT    "nor0=nor"
#define MTDPARTS_DEFAULT  \
	"mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
#else
#define MTDIDS_DEFAULT    "nand0=nand"
#define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
#endif

/* Persistent Environment Config */
#define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_IS_IN_SPI_FLASH
#else
#define CONFIG_ENV_IS_IN_NAND
#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
  #define CONFIG_ENV_SIZE                (8 * 1024)
  #define CONFIG_SYS_MMC_ENV_DEV         0
#elif defined(CONFIG_ENV_IS_IN_NAND)
  #define CONFIG_ENV_OFFSET              (16 << 20)
  #define CONFIG_ENV_SECT_SIZE           (128 << 10)
  #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
  #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET              (512 * 1024)
  #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
  #define CONFIG_ENV_SIZE                (8 * 1024)
  #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
  #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
  #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
  #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
#endif

/* Environment */
#define CONFIG_BOOTDELAY          3
#define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
#define CONFIG_IPADDR             192.168.1.1
#define CONFIG_SERVERIP           192.168.1.146
#define HWCONFIG_DEFAULT \
	"hwconfig=rs232;" \
	"dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \

#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"usb_pgood_delay=2000\0" \
	"console=ttymxc1\0" \
	"bootdevs=usb mmc sata flash\0" \
	HWCONFIG_DEFAULT \
	"video=\0" \
	\
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	\
	"fdt_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"initrd_high=0xffffffff\0" \
	"bootdir=boot\0" \
	"loadfdt=" \
		"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
		"fi\0" \
	\
	"script=6x_bootscript-ventana\0" \
	"loadscript=" \
		"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
			"source; " \
		"fi\0" \
	\
	"uimage=uImage\0" \
	"mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
	"mmc_boot=" \
		"setenv fsload 'ext2load mmc 0:1'; " \
		"mmc dev 0 && mmc rescan && " \
		"setenv dtype mmc; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mmcblk0p1 rootfstype=ext4 " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	\
	"sata_boot=" \
		"setenv fsload 'ext2load sata 0:1'; sata init && " \
		"setenv dtype sata; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=ext4 " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	"usb_boot=" \
		"setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
		"setenv dtype usb; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=ext4 " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0"

#ifdef CONFIG_SPI_FLASH
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	"image_uboot=ventana/u-boot_spi.imx\0" \
	\
	"spi_koffset=0x90000\0" \
	"spi_klen=0x200000\0" \
	\
	"spi_updateuboot=echo Updating uboot from " \
		"${serverip}:${image_uboot}...; " \
		"tftpboot ${loadaddr} ${image_uboot} && " \
		"sf probe && sf erase 0 80000 && " \
			"sf write ${loadaddr} 400 ${filesize}\0" \
	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
		"to ${spi_koffset} ...; " \
		"tftp ${loadaddr} ${image_os} && " \
		"sf probe && " \
		"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	\
	"flash_boot=" \
		"if sf probe && " \
		"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mtdblock3 " \
				"rootfstype=squashfs,jffs2 " \
				"${video} ${extra}; " \
			"bootm; " \
		"fi\0"
#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	\
	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
		"tftp ${loadaddr} ${image_rootfs} && " \
		"nand erase.part rootfs && " \
		"nand write ${loadaddr} rootfs ${filesize}\0" \
	\
	"flash_boot=" \
		"setenv fsload 'ubifsload'; " \
		"ubi part rootfs; " \
		"if ubi check boot; then " \
			"ubifsmount ubi0:boot; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=squashfs,ubifs; " \
			"setenv bootdir; " \
		"elif ubi check rootfs; then " \
			"ubifsmount ubi0:rootfs; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=ubifs; " \
		"fi; " \
		"setenv dtype nand; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=${root} ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"ubifsumount; " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"ubifsumount; bootm; " \
			"fi; " \
		"fi\0"
#endif

#define CONFIG_BOOTCOMMAND \
	"for btype in ${bootdevs}; do " \
		"echo; echo Attempting ${btype} boot...; " \
		"if run ${btype}_boot; then; fi; " \
	"done"

/* Device Tree Support */
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_LIBFDT
#define CONFIG_FDT_FIXUP_PARTITIONS

#ifndef CONFIG_SYS_DCACHE_OFF
  #define CONFIG_CMD_CACHE
#endif

#endif			       /* __CONFIG_H */
Commit	Line	Data
59189a8b TH	1	/*
	2	* Copyright (C) 2013 Gateworks Corporation
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
0cc11dea	10	/* SPL */
06c3564d	11	#define CONFIG_SPL_BOARD_INIT
0cc11dea TH	12	#define CONFIG_SPL_NAND_SUPPORT
	13	#define CONFIG_SPL_MMC_SUPPORT
	14	#define CONFIG_SPL_FAT_SUPPORT
	15	/*
	16	#define CONFIG_SPL_SATA_SUPPORT
	17	*/
	18	/* Location in NAND to read U-Boot from */
	19	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
	20
	21	#include "imx6_spl.h" /* common IMX6 SPL configuration */
59189a8b TH	22	#include "mx6_common.h"
	23	#define CONFIG_MX6
	24	#define CONFIG_DISPLAY_CPUINFO /* display cpu info */
	25	#define CONFIG_DISPLAY_BOARDINFO_LATE /* display board info (after reloc) */
	26
	27	#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
	28
	29	#include <asm/arch/imx-regs.h>
	30	#include <asm/imx-common/gpio.h>
	31
	32	/* ATAGs */
	33	#define CONFIG_CMDLINE_TAG
	34	#define CONFIG_SETUP_MEMORY_TAGS
	35	#define CONFIG_INITRD_TAG
	36	#define CONFIG_SERIAL_TAG
	37	#define CONFIG_REVISION_TAG
	38
effb7dc6 TH	39	#define CONFIG_SYS_GENERIC_BOARD
effb7dc6 TH	40
59189a8b TH	41	/* Size of malloc() pool */
	42	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	43
	44	/* Init Functions */
	45	#define CONFIG_BOARD_EARLY_INIT_F
	46	#define CONFIG_MISC_INIT_R
	47
	48	/* GPIO */
	49	#define CONFIG_MXC_GPIO
32a6eaea	50	#define CONFIG_CMD_GPIO
59189a8b TH	51
	52	/* Serial */
	53	#define CONFIG_MXC_UART
	54	#define CONFIG_MXC_UART_BASE UART2_BASE
	55
	56	#ifdef CONFIG_SPI_FLASH
	57
	58	/* SPI */
	59	#define CONFIG_CMD_SF
	60	#ifdef CONFIG_CMD_SF
	61	#define CONFIG_MXC_SPI
	62	#define CONFIG_SPI_FLASH_MTD
	63	#define CONFIG_SPI_FLASH_BAR
	64	#define CONFIG_SPI_FLASH_WINBOND
	65	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	66	#define CONFIG_SF_DEFAULT_CS 0
59189a8b TH	67	/* GPIO 3-19 (21248) */
	68	#define CONFIG_SF_DEFAULT_SPEED 30000000
	69	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	70	#endif
	71
	72	#else
	73	/* Enable NAND support */
	74	#define CONFIG_CMD_TIME
	75	#define CONFIG_CMD_NAND
	76	#define CONFIG_CMD_NAND_TRIMFFS
	77	#ifdef CONFIG_CMD_NAND
	78	#define CONFIG_NAND_MXS
	79	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	80	#define CONFIG_SYS_NAND_BASE 0x40000000
	81	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	82	#define CONFIG_SYS_NAND_ONFI_DETECTION
	83
	84	/* DMA stuff, needed for GPMI/MXS NAND support */
	85	#define CONFIG_APBH_DMA
	86	#define CONFIG_APBH_DMA_BURST
	87	#define CONFIG_APBH_DMA_BURST8
	88	#endif
	89
	90	#endif /* CONFIG_SPI_FLASH */
	91
	92	/* Flattened Image Tree Suport */
	93	#define CONFIG_FIT
	94	#define CONFIG_FIT_VERBOSE
	95
	96	/* I2C Configs */
	97	#define CONFIG_CMD_I2C
	98	#define CONFIG_SYS_I2C
	99	#define CONFIG_SYS_I2C_MXC
f8cb101e	100	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
9c0fe83e TH	101	#define CONFIG_SYS_I2C_SPEED 100000
	102	#define CONFIG_I2C_GSC 0
	103	#define CONFIG_I2C_PMIC 1
f6747cda	104	#define CONFIG_I2C_EDID
59189a8b TH	105
	106	/* MMC Configs */
	107	#define CONFIG_FSL_ESDHC
	108	#define CONFIG_FSL_USDHC
	109	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	110	#define CONFIG_SYS_FSL_USDHC_NUM 1
	111	#define CONFIG_MMC
	112	#define CONFIG_CMD_MMC
	113	#define CONFIG_GENERIC_MMC
	114	#define CONFIG_BOUNCE_BUFFER
	115
	116	/* Filesystem support */
	117	#define CONFIG_CMD_EXT2
30dc880a TH	118	#define CONFIG_CMD_EXT4
30dc880a TH	119	#define CONFIG_CMD_EXT4_WRITE
59189a8b TH	120	#define CONFIG_CMD_FAT
	121	#define CONFIG_CMD_UBIFS
	122	#define CONFIG_DOS_PARTITION
	123
59189a8b TH	124	/*
	125	* SATA Configs
	126	*/
	127	#define CONFIG_CMD_SATA
	128	#ifdef CONFIG_CMD_SATA
	129	#define CONFIG_DWC_AHSATA
	130	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	131	#define CONFIG_DWC_AHSATA_PORT_ID 0
	132	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	133	#define CONFIG_LBA48
	134	#define CONFIG_LIBATA
	135	#endif
	136
	137	/*
	138	* PCI express
	139	*/
	140	#define CONFIG_CMD_PCI
	141	#ifdef CONFIG_CMD_PCI
	142	#define CONFIG_PCI
	143	#define CONFIG_PCI_PNP
	144	#define CONFIG_PCI_SCAN_SHOW
dad08286	145	#define CONFIG_PCI_FIXUP_DEV
59189a8b TH	146	#define CONFIG_PCIE_IMX
	147	#endif
	148
	149	/*
	150	* PMIC
	151	*/
	152	#define CONFIG_POWER
	153	#define CONFIG_POWER_I2C
	154	#define CONFIG_POWER_PFUZE100
	155	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
234d89da TH	156	#define CONFIG_POWER_LTC3676
234d89da TH	157	#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
59189a8b TH	158
	159	/* Various command support */
	160	#include <config_cmd_default.h>
	161	#undef CONFIG_CMD_IMLS
	162	#define CONFIG_CMD_PING
	163	#define CONFIG_CMD_DHCP
	164	#define CONFIG_CMD_MII
	165	#define CONFIG_CMD_NET
	166	#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
	167	#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
	168	#define CONFIG_CMD_SETEXPR
	169	#define CONFIG_CMD_BOOTZ
	170	#define CONFIG_CMD_GSC
9c0fe83e	171	#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
59189a8b TH	172	#define CONFIG_CMD_UBI
	173	#define CONFIG_RBTREE
	174	#define CONFIG_LZO
	175	#define CONFIG_CMD_FUSE /* eFUSE read/write support */
	176	#ifdef CONFIG_CMD_FUSE
	177	#define CONFIG_MXC_OCOTP
	178	#endif
	179
	180
	181	/* Ethernet support */
	182	#define CONFIG_FEC_MXC
0a6ee033	183	#define CONFIG_E1000
59189a8b TH	184	#define CONFIG_MII
	185	#define IMX_FEC_BASE ENET_BASE_ADDR
	186	#define CONFIG_FEC_XCV_TYPE RGMII
59189a8b TH	187	#define CONFIG_FEC_MXC_PHYADDR 0
	188	#define CONFIG_PHYLIB
	189	#define CONFIG_ARP_TIMEOUT 200UL
	190
	191	/* USB Configs */
	192	#define CONFIG_CMD_USB
	193	#define CONFIG_USB_EHCI
	194	#define CONFIG_USB_EHCI_MX6
	195	#define CONFIG_USB_STORAGE
	196	#define CONFIG_USB_HOST_ETHER
	197	#define CONFIG_USB_ETHER_ASIX
	198	#define CONFIG_USB_ETHER_SMSC95XX
	199	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	200	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	201	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	202	#define CONFIG_MXC_USB_FLAGS 0
	203	#define CONFIG_USB_KEYBOARD
	204	#define CONFIG_CI_UDC
	205	#define CONFIG_USBD_HS
	206	#define CONFIG_USB_GADGET_DUALSPEED
	207	#define CONFIG_USB_ETHER
	208	#define CONFIG_USB_ETH_CDC
	209	#define CONFIG_NETCONSOLE
	210	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
59189a8b	211
9543e954 TH	212	/* USB Mass Storage Gadget */
	213	#define CONFIG_USB_GADGET
	214	#define CONFIG_CMD_USB_MASS_STORAGE
	215	#define CONFIG_USB_GADGET_MASS_STORAGE
	216	#define CONFIG_USBDOWNLOAD_GADGET
	217	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	218
	219	/* Netchip IDs */
	220	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	221	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	222	#define CONFIG_G_DNL_MANUFACTURER "Gateworks"
	223
7a278f9f TH	224	/* Framebuffer and LCD */
	225	#define CONFIG_VIDEO
	226	#define CONFIG_VIDEO_IPUV3
	227	#define CONFIG_CFB_CONSOLE
	228	#define CONFIG_VGA_AS_SINGLE_DEVICE
	229	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	230	#define CONFIG_VIDEO_BMP_RLE8
	231	#define CONFIG_SPLASH_SCREEN
	232	#define CONFIG_BMP_16BPP
	233	#define CONFIG_VIDEO_LOGO
	234	#define CONFIG_IPUV3_CLK 260000000
	235	#define CONFIG_CMD_HDMIDETECT
	236	#define CONFIG_CONSOLE_MUX
	237	#define CONFIG_IMX_HDMI
	238	#define CONFIG_IMX_VIDEO_SKIP
	239
59189a8b TH	240	/* serial console (ttymxc1,115200) */
	241	#define CONFIG_CONS_INDEX 1
	242	#define CONFIG_BAUDRATE 115200
	243
	244	/* Miscellaneous configurable options */
	245	#define CONFIG_SYS_LONGHELP
	246	#define CONFIG_SYS_HUSH_PARSER
	247	#define CONFIG_SYS_PROMPT "Ventana > "
	248	#define CONFIG_SYS_CBSIZE 1024
	249	#define CONFIG_AUTO_COMPLETE
	250	#define CONFIG_CMDLINE_EDITING
	251	#define CONFIG_HWCONFIG
	252
	253	/* Print Buffer Size */
	254	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	255	#define CONFIG_SYS_MAXARGS 16
	256	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	257
	258	/* Memory configuration */
	259	#define CONFIG_SYS_MEMTEST_START 0x10000000
	260	#define CONFIG_SYS_MEMTEST_END 0x10010000
	261	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	262	#define CONFIG_SYS_TEXT_BASE 0x17800000
	263	#define CONFIG_SYS_LOAD_ADDR 0x12000000
	264
	265	/* Physical Memory Map */
	266	#define CONFIG_NR_DRAM_BANKS 1
	267	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	268	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	269	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	270	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	271
	272	#define CONFIG_SYS_INIT_SP_OFFSET \
	273	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	274	#define CONFIG_SYS_INIT_SP_ADDR \
	275	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	276
	277	/* FLASH and environment organization */
	278	#define CONFIG_SYS_NO_FLASH /* no NOR flash */
	279
	280	/*
	281	* MTD Command for mtdparts
	282	*/
	283	#define CONFIG_CMD_MTDPARTS
	284	#define CONFIG_MTD_DEVICE
	285	#define CONFIG_MTD_PARTITIONS
	286	#ifdef CONFIG_SPI_FLASH
	287	#define MTDIDS_DEFAULT "nor0=nor"
	288	#define MTDPARTS_DEFAULT \
	289	"mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
	290	#else
	291	#define MTDIDS_DEFAULT "nand0=nand"
	292	#define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
	293	#endif
	294
	295	/* Persistent Environment Config */
	296	#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
	297	#ifdef CONFIG_SPI_FLASH
	298	#define CONFIG_ENV_IS_IN_SPI_FLASH
	299	#else
	300	#define CONFIG_ENV_IS_IN_NAND
	301	#endif
	302	#if defined(CONFIG_ENV_IS_IN_MMC)
	303	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
304	#define CONFIG_ENV_SIZE (8 * 1024)
305	#define CONFIG_SYS_MMC_ENV_DEV 0
306	#elif defined(CONFIG_ENV_IS_IN_NAND)
307	#define CONFIG_ENV_OFFSET (16 << 20)
308	#define CONFIG_ENV_SECT_SIZE (128 << 10)
309	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
310	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
311	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
312	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
313	#define CONFIG_ENV_OFFSET (512 * 1024)
314	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
315	#define CONFIG_ENV_SIZE (8 * 1024)
316	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
317	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
318	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
319	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
320	#endif
321
322	/* Environment */
323	#define CONFIG_BOOTDELAY 3
324	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
325	#define CONFIG_IPADDR 192.168.1.1
326	#define CONFIG_SERVERIP 192.168.1.146
327	#define HWCONFIG_DEFAULT \
328	"hwconfig=rs232;" \
329	"dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
330
331	#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
04171690	332	"usb_pgood_delay=2000\0" \
59189a8b TH	333	"console=ttymxc1\0" \
	334	"bootdevs=usb mmc sata flash\0" \
	335	HWCONFIG_DEFAULT \
	336	"video=\0" \
	337	\
	338	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	339	"mtdids=" MTDIDS_DEFAULT "\0" \
	340	\
	341	"fdt_high=0xffffffff\0" \
	342	"fdt_addr=0x18000000\0" \
8cc25eb8	343	"initrd_high=0xffffffff\0" \
e2801a96	344	"bootdir=boot\0" \
59189a8b	345	"loadfdt=" \
e2801a96 TH	346	"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
	347	"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
	348	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
	349	"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
	350	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
	351	"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
59189a8b TH	352	"fi\0" \
59189a8b TH	353	\
e2801a96	354	"script=6x_bootscript-ventana\0" \
59189a8b	355	"loadscript=" \
e2801a96	356	"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
59189a8b TH	357	"source; " \
	358	"fi\0" \
	359	\
e2801a96	360	"uimage=uImage\0" \
59189a8b TH	361	"mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
	362	"mmc_boot=" \
	363	"setenv fsload 'ext2load mmc 0:1'; " \
	364	"mmc dev 0 && mmc rescan && " \
560e8b3f	365	"setenv dtype mmc; run loadscript; " \
e2801a96	366	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b TH	367	"setenv bootargs console=${console},${baudrate} " \
	368	"root=/dev/mmcblk0p1 rootfstype=ext4 " \
	369	"rootwait rw ${video} ${extra}; " \
	370	"if run loadfdt && fdt addr ${fdt_addr}; then " \
	371	"bootm ${loadaddr} - ${fdt_addr}; " \
	372	"else " \
	373	"bootm; " \
	374	"fi; " \
	375	"fi\0" \
	376	\
	377	"sata_boot=" \
	378	"setenv fsload 'ext2load sata 0:1'; sata init && " \
560e8b3f	379	"setenv dtype sata; run loadscript; " \
e2801a96	380	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b TH	381	"setenv bootargs console=${console},${baudrate} " \
	382	"root=/dev/sda1 rootfstype=ext4 " \
	383	"rootwait rw ${video} ${extra}; " \
	384	"if run loadfdt && fdt addr ${fdt_addr}; then " \
	385	"bootm ${loadaddr} - ${fdt_addr}; " \
	386	"else " \
	387	"bootm; " \
	388	"fi; " \
	389	"fi\0" \
	390	"usb_boot=" \
	391	"setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
560e8b3f	392	"setenv dtype usb; run loadscript; " \
e2801a96	393	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b TH	394	"setenv bootargs console=${console},${baudrate} " \
	395	"root=/dev/sda1 rootfstype=ext4 " \
	396	"rootwait rw ${video} ${extra}; " \
	397	"if run loadfdt && fdt addr ${fdt_addr}; then " \
	398	"bootm ${loadaddr} - ${fdt_addr}; " \
	399	"else " \
	400	"bootm; " \
	401	"fi; " \
	402	"fi\0"
	403
	404	#ifdef CONFIG_SPI_FLASH
	405	#define CONFIG_EXTRA_ENV_SETTINGS \
	406	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	407	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	408	"image_uboot=ventana/u-boot_spi.imx\0" \
	409	\
	410	"spi_koffset=0x90000\0" \
	411	"spi_klen=0x200000\0" \
	412	\
	413	"spi_updateuboot=echo Updating uboot from " \
	414	"${serverip}:${image_uboot}...; " \
	415	"tftpboot ${loadaddr} ${image_uboot} && " \
	416	"sf probe && sf erase 0 80000 && " \
	417	"sf write ${loadaddr} 400 ${filesize}\0" \
	418	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
	419	"to ${spi_koffset} ...; " \
	420	"tftp ${loadaddr} ${image_os} && " \
	421	"sf probe && " \
	422	"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	423	\
	424	"flash_boot=" \
	425	"if sf probe && " \
	426	"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
	427	"setenv bootargs console=${console},${baudrate} " \
	428	"root=/dev/mtdblock3 " \
	429	"rootfstype=squashfs,jffs2 " \
	430	"${video} ${extra}; " \
	431	"bootm; " \
	432	"fi\0"
	433	#else
	434	#define CONFIG_EXTRA_ENV_SETTINGS \
	435	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
59189a8b	436	\
e2801a96	437	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
59189a8b TH	438	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
	439	"tftp ${loadaddr} ${image_rootfs} && " \
	440	"nand erase.part rootfs && " \
	441	"nand write ${loadaddr} rootfs ${filesize}\0" \
	442	\
	443	"flash_boot=" \
	444	"setenv fsload 'ubifsload'; " \
e2801a96 TH	445	"ubi part rootfs; " \
	446	"if ubi check boot; then " \
	447	"ubifsmount ubi0:boot; " \
	448	"setenv root ubi0:rootfs ubi.mtd=2 " \
	449	"rootfstype=squashfs,ubifs; " \
	450	"setenv bootdir; " \
	451	"elif ubi check rootfs; then " \
	452	"ubifsmount ubi0:rootfs; " \
	453	"setenv root ubi0:rootfs ubi.mtd=2 " \
	454	"rootfstype=ubifs; " \
	455	"fi; " \
560e8b3f	456	"setenv dtype nand; run loadscript; " \
e2801a96	457	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	458	"setenv bootargs console=${console},${baudrate} " \
e2801a96	459	"root=${root} ${video} ${extra}; " \
59189a8b TH	460	"if run loadfdt && fdt addr ${fdt_addr}; then " \
	461	"ubifsumount; " \
	462	"bootm ${loadaddr} - ${fdt_addr}; " \
	463	"else " \
	464	"ubifsumount; bootm; " \
	465	"fi; " \
	466	"fi\0"
	467	#endif
	468
	469	#define CONFIG_BOOTCOMMAND \
	470	"for btype in ${bootdevs}; do " \
	471	"echo; echo Attempting ${btype} boot...; " \
	472	"if run ${btype}_boot; then; fi; " \
	473	"done"
	474
	475	/* Device Tree Support */
	476	#define CONFIG_OF_BOARD_SETUP
	477	#define CONFIG_OF_LIBFDT
	478	#define CONFIG_FDT_FIXUP_PARTITIONS
	479
	480	#ifndef CONFIG_SYS_DCACHE_OFF
	481	#define CONFIG_CMD_CACHE
	482	#endif
	483
	484	#endif /* __CONFIG_H */