[people/ms/u-boot.git] / include / configs / hmi1001.h

/*
 * (C) Copyright 2003-2005
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
#define CONFIG_HMI1001		1	/* HMI1001 board			*/

#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/

#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM		0x02	/* Software reboot			*/

#define CONFIG_BOARD_EARLY_INIT_R

#define CONFIG_HIGH_BATS	1	/* High BATs supported			*/

/*
 * Serial console configuration
 */
#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/* Partitions */
#define CONFIG_DOS_PARTITION


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DATE
#define CONFIG_CMD_DISPLAY
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SNTP


#define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */

#if (TEXT_BASE == 0xFFF00000) /* Boot low */
#   define CONFIG_SYS_LOWBOOT		1
#endif

/*
 * Autobooting
 */
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */

#define CONFIG_PREBOOT	"echo;" \
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

#undef	CONFIG_BOOTARGS

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"flash_nfs=run nfsargs addip;"					\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
	"rootpath=/opt/eldk/ppc_82xx\0"					\
	""

#define CONFIG_BOOTCOMMAND	"run net_nfs"

#define CONFIG_MISC_INIT_R	1

/*
 * IPB Bus clocking configuration.
 */
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */

/*
 * I2C configuration
 */
#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */

#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
#define CONFIG_SYS_I2C_SLAVE		0x7F

/*
 * EEPROM configuration
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10

/*
 * RTC configuration
 */
#define CONFIG_RTC_PCF8563
#define CONFIG_SYS_I2C_RTC_ADDR		0x51

/*
 * Flash configuration
 */
#define CONFIG_SYS_FLASH_BASE		0xFF800000

#define CONFIG_SYS_FLASH_SIZE		0x00800000 /* 8 MByte */
#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip */

#define CONFIG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
					   (= chip selects) */
#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_CFI_AMD_RESET

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_SIZE		0x4000
#define CONFIG_ENV_SECT_SIZE	0x20000
#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)

/*
 * Memory map
 */
#define CONFIG_SYS_MBAR		0xF0000000
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
#define CONFIG_SYS_DISPLAY_BASE	0x80600000
#define CONFIG_SYS_STATUS1_BASE	0x80600200
#define CONFIG_SYS_STATUS2_BASE	0x80600300

/* Settings for XLB = 132 MHz */
#define SDRAM_DDR	 1
#define SDRAM_MODE      0x018D0000
#define SDRAM_EMODE     0x40090000
#define SDRAM_CONTROL   0x714f0f00
#define SDRAM_CONFIG1   0x73722930
#define SDRAM_CONFIG2   0x47770000
#define SDRAM_TAPDELAY  0x10000000

/* Use ON-Chip SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
#ifdef CONFIG_POST
/* preserve space for the post_word at end of on-chip SRAM */
#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
#else
#define CONFIG_SYS_INIT_RAM_END	MPC5XXX_SRAM_SIZE
#endif


#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#   define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*
 * Ethernet configuration
 */
#define CONFIG_MPC5xxx_FEC	1
#define CONFIG_PHY_ADDR		0x00
#define CONFIG_MII		1		/* MII PHY management		*/

/*
 * GPIO configuration
 */
#define CONFIG_SYS_GPS_PORT_CONFIG	0x01051004

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
#endif

/* Enable an alternate, more extensive memory test */
#define CONFIG_SYS_ALT_MEMTEST

#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */

#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */

/*
 * Enable loopw command.
 */
#define CONFIG_LOOPW

/*
 * Various low-level settings
 */
#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL		HID0_ICE
#else
#define CONFIG_SYS_HID0_INIT		0
#define CONFIG_SYS_HID0_FINAL		0
#endif

#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_BOOTCS_CFG		0x0004FB00
#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE

/* 8Mbit SRAM @0x80100000 */
#define CONFIG_SYS_CS1_START		0x80100000
#define CONFIG_SYS_CS1_SIZE		0x00100000
#define CONFIG_SYS_CS1_CFG		0x19B00

/* FRAM 32Kbyte @0x80700000 */
#define CONFIG_SYS_CS2_START		0x80700000
#define CONFIG_SYS_CS2_SIZE		0x00008000
#define CONFIG_SYS_CS2_CFG		0x19800

/* Display H1, Status Inputs, EPLD @0x80600000 */
#define CONFIG_SYS_CS3_START		0x80600000
#define CONFIG_SYS_CS3_SIZE		0x00100000
#define CONFIG_SYS_CS3_CFG		0x00019800

#define CONFIG_SYS_CS_BURST		0x00000000
#define CONFIG_SYS_CS_DEADCYCLE	0x33333333

/*-----------------------------------------------------------------------
 * IDE/ATA stuff Supports IDE harddisk
 *-----------------------------------------------------------------------
 */

#undef  CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/

#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/

#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/

#define CONFIG_IDE_PREINIT	1

#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000

#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA

/* Offset for data I/O			*/
#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)

/* Offset for normal register accesses	*/
#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)

/* Offset for alternate registers	*/
#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)

/* Interval between registers                                                */
#define CONFIG_SYS_ATA_STRIDE          4

#define CONFIG_ATAPI            1

#define CONFIG_VIDEO_SMI_LYNXEM
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_LOGO

/*
 * PCI Mapping:
 * 0x40000000 - 0x4fffffff - PCI Memory
 * 0x50000000 - 0x50ffffff - PCI IO Space
 */
#define CONFIG_PCI		1
#define CONFIG_PCI_PNP		1
#define CONFIG_PCI_SCAN_SHOW	1
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1

#define CONFIG_PCI_MEM_BUS	0x40000000
#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE	0x10000000

#define CONFIG_PCI_IO_BUS	0x50000000
#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE	0x01000000

#define CONFIG_SYS_ISA_IO		CONFIG_PCI_IO_BUS

/*---------------------------------------------------------------------*/
/* Display addresses						       */
/*---------------------------------------------------------------------*/

#define CONFIG_SYS_DISP_CHR_RAM	(CONFIG_SYS_DISPLAY_BASE + 0x38)
#define CONFIG_SYS_DISP_CWORD		(CONFIG_SYS_DISPLAY_BASE + 0x30)

#endif /* __CONFIG_H */
Commit	Line	Data
a87589da WD	1	/*
	2	* (C) Copyright 2003-2005
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	#ifndef __CONFIG_H
	25	#define __CONFIG_H
	26
	27	/*
	28	* High Level Configuration Options
	29	* (easy to change)
	30	*/
	31
	32	#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
	33	#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
	34	#define CONFIG_HMI1001 1 /* HMI1001 board */
	35
6d0f6bcf	36	#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
a87589da WD	37
	38	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	39	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	40
a87589da WD	41	#define CONFIG_BOARD_EARLY_INIT_R
a87589da WD	42
31d82672 BB	43	#define CONFIG_HIGH_BATS 1 /* High BATs supported */
31d82672 BB	44
a87589da WD	45	/*
	46	* Serial console configuration
	47	*/
	48	#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
	49	#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
6d0f6bcf	50	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
a87589da	51
08abe158 WD	52	/* Partitions */
	53	#define CONFIG_DOS_PARTITION
	54
48d5d102	55
7f5c0157 JL	56	/*
	57	* BOOTP options
	58	*/
	59	#define CONFIG_BOOTP_BOOTFILESIZE
	60	#define CONFIG_BOOTP_BOOTPATH
	61	#define CONFIG_BOOTP_GATEWAY
	62	#define CONFIG_BOOTP_HOSTNAME
	63
	64
a87589da	65	/*
48d5d102	66	* Command line configuration.
a87589da	67	*/
48d5d102 JL	68	#include <config_cmd_default.h>
	69
	70	#define CONFIG_CMD_DATE
	71	#define CONFIG_CMD_DISPLAY
	72	#define CONFIG_CMD_DHCP
	73	#define CONFIG_CMD_EEPROM
	74	#define CONFIG_CMD_I2C
	75	#define CONFIG_CMD_IDE
	76	#define CONFIG_CMD_NFS
	77	#define CONFIG_CMD_PCI
	78	#define CONFIG_CMD_SNTP
	79
a87589da WD	80
	81	#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
	82
	83	#if (TEXT_BASE == 0xFFF00000) /* Boot low */
6d0f6bcf	84	# define CONFIG_SYS_LOWBOOT 1
a87589da WD	85	#endif
	86
	87	/*
	88	* Autobooting
	89	*/
	90	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	91
	92	#define CONFIG_PREBOOT "echo;" \
32bf3d14	93	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
a87589da WD	94	"echo"
	95
	96	#undef CONFIG_BOOTARGS
	97
	98	#define CONFIG_EXTRA_ENV_SETTINGS \
	99	"netdev=eth0\0" \
	100	"nfsargs=setenv bootargs root=/dev/nfs rw " \
fe126d8b	101	"nfsroot=${serverip}:${rootpath}\0" \
a87589da	102	"ramargs=setenv bootargs root=/dev/ram rw\0" \
fe126d8b WD	103	"addip=setenv bootargs ${bootargs} " \
	104	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	105	":${hostname}:${netdev}:off panic=1\0" \
a87589da	106	"flash_nfs=run nfsargs addip;" \
fe126d8b WD	107	"bootm ${kernel_addr}\0" \
fe126d8b WD	108	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
a87589da WD	109	"rootpath=/opt/eldk/ppc_82xx\0" \
	110	""
	111
	112	#define CONFIG_BOOTCOMMAND "run net_nfs"
	113
9f96ae44 WD	114	#define CONFIG_MISC_INIT_R 1
9f96ae44 WD	115
a87589da WD	116	/*
	117	* IPB Bus clocking configuration.
	118	*/
6d0f6bcf	119	#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
a87589da	120
342717f7 WD	121	/*
	122	* I2C configuration
	123	*/
	124	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
6d0f6bcf	125	#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
342717f7	126
6d0f6bcf JCPV	127	#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
6d0f6bcf JCPV	128	#define CONFIG_SYS_I2C_SLAVE 0x7F
342717f7 WD	129
	130	/*
	131	* EEPROM configuration
	132	*/
6d0f6bcf JCPV	133	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58
	134	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	135	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	136	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
342717f7 WD	137
	138	/*
	139	* RTC configuration
	140	*/
	141	#define CONFIG_RTC_PCF8563
6d0f6bcf	142	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
342717f7	143
a87589da WD	144	/*
	145	* Flash configuration
	146	*/
6d0f6bcf	147	#define CONFIG_SYS_FLASH_BASE 0xFF800000
a87589da	148
6d0f6bcf JCPV	149	#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
6d0f6bcf JCPV	150	#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */
a87589da	151
0e8d1586	152	#define CONFIG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */
6d0f6bcf	153	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
a87589da	154	(= chip selects) */
6d0f6bcf JCPV	155	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
6d0f6bcf JCPV	156	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
a87589da	157
00b1883a	158	#define CONFIG_FLASH_CFI_DRIVER
6d0f6bcf JCPV	159	#define CONFIG_SYS_FLASH_CFI
	160	#define CONFIG_SYS_FLASH_EMPTY_INFO
	161	#define CONFIG_SYS_FLASH_CFI_AMD_RESET
a87589da WD	162
	163	/*
	164	* Environment settings
	165	*/
5a1aceb0	166	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	167	#define CONFIG_ENV_SIZE 0x4000
	168	#define CONFIG_ENV_SECT_SIZE 0x20000
	169	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
	170	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
a87589da WD	171
	172	/*
	173	* Memory map
	174	*/
6d0f6bcf JCPV	175	#define CONFIG_SYS_MBAR 0xF0000000
	176	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	177	#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
	178	#define CONFIG_SYS_DISPLAY_BASE 0x80600000
	179	#define CONFIG_SYS_STATUS1_BASE 0x80600200
	180	#define CONFIG_SYS_STATUS2_BASE 0x80600300
a87589da WD	181
	182	/* Settings for XLB = 132 MHz */
	183	#define SDRAM_DDR 1
	184	#define SDRAM_MODE 0x018D0000
	185	#define SDRAM_EMODE 0x40090000
	186	#define SDRAM_CONTROL 0x714f0f00
	187	#define SDRAM_CONFIG1 0x73722930
	188	#define SDRAM_CONFIG2 0x47770000
	189	#define SDRAM_TAPDELAY 0x10000000
	190
	191	/* Use ON-Chip SRAM until RAM will be available */
6d0f6bcf	192	#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
a87589da WD	193	#ifdef CONFIG_POST
a87589da WD	194	/* preserve space for the post_word at end of on-chip SRAM */
6d0f6bcf	195	#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
a87589da	196	#else
6d0f6bcf	197	#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
a87589da WD	198	#endif
	199
	200
6d0f6bcf JCPV	201	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	202	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	203	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
a87589da	204
6d0f6bcf JCPV	205	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	206	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	207	# define CONFIG_SYS_RAMBOOT 1
a87589da WD	208	#endif
a87589da WD	209
6d0f6bcf JCPV	210	#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	211	#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 128 kB for malloc() */
	212	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
a87589da WD	213
	214	/*
	215	* Ethernet configuration
	216	*/
	217	#define CONFIG_MPC5xxx_FEC 1
	218	#define CONFIG_PHY_ADDR 0x00
8d7e2732	219	#define CONFIG_MII 1 /* MII PHY management */
a87589da WD	220
	221	/*
	222	* GPIO configuration
	223	*/
6d0f6bcf	224	#define CONFIG_SYS_GPS_PORT_CONFIG 0x01051004
a87589da	225
a87589da WD	226	/*
	227	* Miscellaneous configurable options
	228	*/
6d0f6bcf JCPV	229	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	230	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
48d5d102	231	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	232	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
a87589da	233	#else
6d0f6bcf	234	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
a87589da	235	#endif
6d0f6bcf JCPV	236	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	237	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	238	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
a87589da	239
6d0f6bcf	240	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
48d5d102	241	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	242	# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
48d5d102 JL	243	#endif
48d5d102 JL	244
a87589da	245	/* Enable an alternate, more extensive memory test */
6d0f6bcf	246	#define CONFIG_SYS_ALT_MEMTEST
a87589da	247
6d0f6bcf JCPV	248	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
6d0f6bcf JCPV	249	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
a87589da	250
6d0f6bcf	251	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
a87589da	252
6d0f6bcf	253	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
a87589da WD	254
a87589da WD	255	/*
7f5c0157	256	* Enable loopw command.
a87589da WD	257	*/
	258	#define CONFIG_LOOPW
	259
	260	/*
	261	* Various low-level settings
	262	*/
	263	#if defined(CONFIG_MPC5200)
6d0f6bcf JCPV	264	#define CONFIG_SYS_HID0_INIT HID0_ICE \| HID0_ICFI
6d0f6bcf JCPV	265	#define CONFIG_SYS_HID0_FINAL HID0_ICE
a87589da	266	#else
6d0f6bcf JCPV	267	#define CONFIG_SYS_HID0_INIT 0
6d0f6bcf JCPV	268	#define CONFIG_SYS_HID0_FINAL 0
a87589da WD	269	#endif
a87589da WD	270
6d0f6bcf JCPV	271	#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
	272	#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
	273	#define CONFIG_SYS_BOOTCS_CFG 0x0004FB00
	274	#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
	275	#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
a87589da WD	276
a87589da WD	277	/* 8Mbit SRAM @0x80100000 */
6d0f6bcf JCPV	278	#define CONFIG_SYS_CS1_START 0x80100000
	279	#define CONFIG_SYS_CS1_SIZE 0x00100000
	280	#define CONFIG_SYS_CS1_CFG 0x19B00
a87589da WD	281
a87589da WD	282	/* FRAM 32Kbyte @0x80700000 */
6d0f6bcf JCPV	283	#define CONFIG_SYS_CS2_START 0x80700000
	284	#define CONFIG_SYS_CS2_SIZE 0x00008000
	285	#define CONFIG_SYS_CS2_CFG 0x19800
a87589da WD	286
a87589da WD	287	/* Display H1, Status Inputs, EPLD @0x80600000 */
6d0f6bcf JCPV	288	#define CONFIG_SYS_CS3_START 0x80600000
	289	#define CONFIG_SYS_CS3_SIZE 0x00100000
	290	#define CONFIG_SYS_CS3_CFG 0x00019800
a87589da	291
6d0f6bcf JCPV	292	#define CONFIG_SYS_CS_BURST 0x00000000
6d0f6bcf JCPV	293	#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
a87589da	294
08abe158 WD	295	/*-----------------------------------------------------------------------
	296	* IDE/ATA stuff Supports IDE harddisk
	297	*-----------------------------------------------------------------------
	298	*/
	299
	300	#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
	301
	302	#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
	303	#undef CONFIG_IDE_LED /* LED for ide not supported */
	304
6d0f6bcf JCPV	305	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
6d0f6bcf JCPV	306	#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
08abe158	307
9d3338d2 WD	308	#define CONFIG_IDE_PREINIT 1
9d3338d2 WD	309
6d0f6bcf	310	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
08abe158	311
6d0f6bcf	312	#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
08abe158 WD	313
08abe158 WD	314	/* Offset for data I/O */
6d0f6bcf	315	#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
08abe158 WD	316
08abe158 WD	317	/* Offset for normal register accesses */
6d0f6bcf	318	#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
08abe158 WD	319
08abe158 WD	320	/* Offset for alternate registers */
6d0f6bcf	321	#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
08abe158 WD	322
08abe158 WD	323	/* Interval between registers */
6d0f6bcf	324	#define CONFIG_SYS_ATA_STRIDE 4
08abe158 WD	325
	326	#define CONFIG_ATAPI 1
	327
ccd9d3d6 WD	328	#define CONFIG_VIDEO_SMI_LYNXEM
	329	#define CONFIG_CFB_CONSOLE
	330	#define CONFIG_VGA_AS_SINGLE_DEVICE
	331	#define CONFIG_VIDEO_LOGO
	332
98128f38 WD	333	/*
	334	* PCI Mapping:
	335	* 0x40000000 - 0x4fffffff - PCI Memory
	336	* 0x50000000 - 0x50ffffff - PCI IO Space
	337	*/
	338	#define CONFIG_PCI 1
	339	#define CONFIG_PCI_PNP 1
	340	#define CONFIG_PCI_SCAN_SHOW 1
f33fca22	341	#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
98128f38 WD	342
	343	#define CONFIG_PCI_MEM_BUS 0x40000000
	344	#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
	345	#define CONFIG_PCI_MEM_SIZE 0x10000000
	346
	347	#define CONFIG_PCI_IO_BUS 0x50000000
	348	#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
	349	#define CONFIG_PCI_IO_SIZE 0x01000000
	350
6d0f6bcf	351	#define CONFIG_SYS_ISA_IO CONFIG_PCI_IO_BUS
ccd9d3d6	352
9f96ae44 WD	353	/---------------------------------------------------------------------/
	354	/* Display addresses */
	355	/---------------------------------------------------------------------/
	356
6d0f6bcf JCPV	357	#define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38)
6d0f6bcf JCPV	358	#define CONFIG_SYS_DISP_CWORD (CONFIG_SYS_DISPLAY_BASE + 0x30)
9f96ae44	359
a87589da	360	#endif /* __CONFIG_H */