[people/ms/u-boot.git] / include / configs / imx27lite-common.h

/*
 * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
 *
 * based on:
 * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __IMX27LITE_COMMON_CONFIG_H
#define __IMX27LITE_COMMON_CONFIG_H

/*
 * SoC Configuration
 */
#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
#define CONFIG_MX27
#define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */

#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_DISPLAY_CPUINFO

#define CONFIG_SYS_TEXT_BASE		0xc0000000

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1

/*
 * Lowlevel configuration
 */
#define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
		(ESDCFG_TRC(10) |	\
		ESDCFG_TRCD(3) |	\
		ESDCFG_TCAS(cas) |	\
		ESDCFG_TRRD(1) |	\
		ESDCFG_TRAS(5) |	\
		ESDCFG_TWR |		\
		ESDCFG_TMRD(2) |	\
		ESDCFG_TRP(2) |		\
		ESDCFG_TXP(3))

#define SDRAM_ESDCTL_REGISTER_VAL	\
		(ESDCTL_PRCT(0) |	\
		 ESDCTL_BL |		\
		 ESDCTL_PWDT(0) |	\
		 ESDCTL_SREFR(3) |	\
		 ESDCTL_DSIZ_32 |	\
		 ESDCTL_COL10 |		\
		 ESDCTL_ROW13 |		\
		 ESDCTL_SDE)

#define SDRAM_ALL_VAL		0xf00

#define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
#define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000

#define MPCTL0_VAL	0x1ef15d5

#define SPCTL0_VAL	0x043a1c09

#define CSCR_VAL	0x33f08107

#define PCDR0_VAL	0x120470c3
#define PCDR1_VAL	0x03030303
#define PCCR0_VAL	0xffffffff
#define PCCR1_VAL	0xfffffffc

#define AIPI1_PSR0_VAL	0x20040304
#define AIPI1_PSR1_VAL	0xdffbfcfb
#define AIPI2_PSR0_VAL	0x07ffc200
#define AIPI2_PSR1_VAL	0xffffffff

/*
 * Memory Info
 */
/* malloc() len */
#define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
/* memtest start address */
#define CONFIG_SYS_MEMTEST_START	0xA0000000
#define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
#define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */

/*
 * Serial Driver info
 */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART1_BASE
#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
#define CONFIG_BAUDRATE		115200		/* Default baud rate */

/*
 * Flash & Environment
 */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
/* Use buffered writes (~10x faster) */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
/* Use hardware sector protection */
#define CONFIG_SYS_FLASH_PROTECTION		1
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
/* CS2 Base address */
#define PHYS_FLASH_1			0xc0000000
/* Flash Base for U-Boot */
#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE / \
		CONFIG_SYS_FLASH_SECT_SZ)
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE

/*
 * Ethernet
 */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_MXC_PHYADDR		0x1f
#define CONFIG_MII

/*
 * MTD
 */
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_DEVICE

/*
 * NAND
 */
#define CONFIG_NAND_MXC
#define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0xd8000000
#define CONFIG_JFFS2_NAND
#define CONFIG_MXC_NAND_HWECC

/*
 * SD/MMC
 */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_MXC_MMC
#define CONFIG_DOS_PARTITION

/*
 * GPIO
 */
#define CONFIG_MXC_GPIO

/*
 * MTD partitions
 */
#define CONFIG_CMD_MTDPARTS

/*
 * U-Boot general configuration
 */
#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
/* Print buffer sz */
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
		sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_LONGHELP

/*
 * U-Boot commands
 */
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING

#define CONFIG_BOOTDELAY	5

#define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=ttymxc0,${baudrate}\0"			\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addmisc=setenv bootargs ${bootargs}\0"				\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
	"kernel_addr_r=a0800000\0"					\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
		"run nfsargs addip addtty addmtd addmisc;"		\
		"bootm\0"						\
	"bootcmd=run net_nfs\0"						\
	"load=tftp ${loadaddr} ${u-boot}\0"				\
	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)	\
		" +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
		" +${filesize};cp.b ${fileaddr} "			\
		__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"	\
	"upd=run load update\0"						\
	"mtdids=" MTDIDS_DEFAULT "\0"					\
	"mtdparts=" MTDPARTS_DEFAULT "\0"				\

/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
					GENERATED_GBL_DATA_SIZE)
#endif /* __IMX27LITE_COMMON_CONFIG_H */
Commit	Line	Data
bbe31092 HS	1	/*
	2	* Copyright (C) 2010 Heiko Schocher <hs@denx.de>
	3	*
	4	* based on:
	5	* Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
bbe31092 HS	8	*/
	9
	10	#ifndef __IMX27LITE_COMMON_CONFIG_H
	11	#define __IMX27LITE_COMMON_CONFIG_H
	12
	13	/*
	14	* SoC Configuration
	15	*/
	16	#define CONFIG_ARM926EJS /* arm926ejs CPU core */
	17	#define CONFIG_MX27
	18	#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
bbe31092 HS	19
	20	#define CONFIG_DISPLAY_BOARDINFO
	21	#define CONFIG_DISPLAY_CPUINFO
	22
43f13e4a FE	23	#define CONFIG_SYS_TEXT_BASE 0xc0000000
43f13e4a FE	24
bbe31092 HS	25	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	26	#define CONFIG_SETUP_MEMORY_TAGS 1
	27	#define CONFIG_INITRD_TAG 1
	28
	29	/*
	30	* Lowlevel configuration
	31	*/
	32	#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
	33	(ESDCFG_TRC(10) \| \
	34	ESDCFG_TRCD(3) \| \
	35	ESDCFG_TCAS(cas) \| \
	36	ESDCFG_TRRD(1) \| \
	37	ESDCFG_TRAS(5) \| \
	38	ESDCFG_TWR \| \
	39	ESDCFG_TMRD(2) \| \
	40	ESDCFG_TRP(2) \| \
	41	ESDCFG_TXP(3))
	42
	43	#define SDRAM_ESDCTL_REGISTER_VAL \
	44	(ESDCTL_PRCT(0) \| \
	45	ESDCTL_BL \| \
	46	ESDCTL_PWDT(0) \| \
	47	ESDCTL_SREFR(3) \| \
	48	ESDCTL_DSIZ_32 \| \
	49	ESDCTL_COL10 \| \
	50	ESDCTL_ROW13 \| \
	51	ESDCTL_SDE)
	52
	53	#define SDRAM_ALL_VAL 0xf00
	54
	55	#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */
	56	#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000
	57
	58	#define MPCTL0_VAL 0x1ef15d5
	59
	60	#define SPCTL0_VAL 0x043a1c09
	61
	62	#define CSCR_VAL 0x33f08107
	63
	64	#define PCDR0_VAL 0x120470c3
	65	#define PCDR1_VAL 0x03030303
	66	#define PCCR0_VAL 0xffffffff
	67	#define PCCR1_VAL 0xfffffffc
	68
	69	#define AIPI1_PSR0_VAL 0x20040304
	70	#define AIPI1_PSR1_VAL 0xdffbfcfb
	71	#define AIPI2_PSR0_VAL 0x07ffc200
	72	#define AIPI2_PSR1_VAL 0xffffffff
	73
	74	/*
	75	* Memory Info
	76	*/
	77	/* malloc() len */
	78	#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024)
bbe31092 HS	79	/* memtest start address */
	80	#define CONFIG_SYS_MEMTEST_START 0xA0000000
	81	#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */
	82	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
bbe31092 HS	83	#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */
	84	#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
	85
	86	/*
	87	* Serial Driver info
	88	*/
	89	#define CONFIG_MXC_UART
40f6fffe	90	#define CONFIG_MXC_UART_BASE UART1_BASE
bbe31092 HS	91	#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
bbe31092 HS	92	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
bbe31092 HS	93
	94	/*
	95	* Flash & Environment
	96	*/
	97	#define CONFIG_ENV_IS_IN_FLASH
	98	#define CONFIG_FLASH_CFI_DRIVER
	99	#define CONFIG_SYS_FLASH_CFI
	100	/* Use buffered writes (~10x faster) */
	101	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
	102	/* Use hardware sector protection */
	103	#define CONFIG_SYS_FLASH_PROTECTION 1
	104	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
	105	/* CS2 Base address */
	106	#define PHYS_FLASH_1 0xc0000000
	107	/* Flash Base for U-Boot */
	108	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	109	#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \
	110	CONFIG_SYS_FLASH_SECT_SZ)
	111	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	112	#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */
	113	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	114	/* Address and size of Redundant Environment Sector */
	115	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	116	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	117
	118	/*
	119	* Ethernet
	120	*/
	121	#define CONFIG_FEC_MXC
	122	#define CONFIG_FEC_MXC_PHYADDR 0x1f
	123	#define CONFIG_MII
bbe31092 HS	124
	125	/*
	126	* MTD
	127	*/
	128	#define CONFIG_FLASH_CFI_MTD
	129	#define CONFIG_MTD_DEVICE
	130
	131	/*
	132	* NAND
	133	*/
	134	#define CONFIG_NAND_MXC
	135	#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000
	136	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	137	#define CONFIG_SYS_NAND_BASE 0xd8000000
	138	#define CONFIG_JFFS2_NAND
	139	#define CONFIG_MXC_NAND_HWECC
bbe31092 HS	140
	141	/*
	142	* SD/MMC
	143	*/
	144	#define CONFIG_MMC
	145	#define CONFIG_GENERIC_MMC
	146	#define CONFIG_MXC_MMC
	147	#define CONFIG_DOS_PARTITION
	148
953884c3	149	/*
	150	* GPIO
	151	*/
	152	#define CONFIG_MXC_GPIO
	153
bbe31092 HS	154	/*
	155	* MTD partitions
	156	*/
	157	#define CONFIG_CMD_MTDPARTS
	158
	159	/*
	160	* U-Boot general configuration
	161	*/
bbe31092 HS	162	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	163	/* Print buffer sz */
	164	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	165	sizeof(CONFIG_SYS_PROMPT) + 16)
	166	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	167	/* Boot Argument Buffer Size */
	168	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	169	#define CONFIG_CMDLINE_EDITING
	170	#define CONFIG_SYS_LONGHELP
	171
	172	/*
	173	* U-Boot commands
	174	*/
	175	#include <config_cmd_default.h>
	176	#define CONFIG_CMD_ASKENV
c3330e9d	177	#define CONFIG_CMD_CACHE
bbe31092 HS	178	#define CONFIG_CMD_DHCP
	179	#define CONFIG_CMD_DIAG
	180	#define CONFIG_CMD_FAT
	181	#define CONFIG_CMD_JFFS2
	182	#define CONFIG_CMD_MII
	183	#define CONFIG_CMD_MMC
	184	#define CONFIG_CMD_NAND
	185	#define CONFIG_CMD_PING
	186
	187	#define CONFIG_BOOTDELAY 5
	188
	189	#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */
	190	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	191
bbe31092 HS	192	#define CONFIG_EXTRA_ENV_SETTINGS \
	193	"netdev=eth0\0" \
	194	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	195	"nfsroot=${serverip}:${rootpath}\0" \
	196	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	197	"addip=setenv bootargs ${bootargs} " \
	198	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	199	":${hostname}:${netdev}:off panic=1\0" \
	200	"addtty=setenv bootargs ${bootargs}" \
	201	" console=ttymxc0,${baudrate}\0" \
	202	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	203	"addmisc=setenv bootargs ${bootargs}\0" \
93ea89f0	204	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
bbe31092	205	"kernel_addr_r=a0800000\0" \
93ea89f0	206	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
bbe31092 HS	207	"rootpath=/opt/eldk-4.2-arm/arm\0" \
	208	"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
	209	"run nfsargs addip addtty addmtd addmisc;" \
	210	"bootm\0" \
93ea89f0	211	"bootcmd=run net_nfs\0" \
bbe31092	212	"load=tftp ${loadaddr} ${u-boot}\0" \
93ea89f0 MV	213	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
93ea89f0 MV	214	" +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
bbe31092	215	" +${filesize};cp.b ${fileaddr} " \
93ea89f0	216	__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
bbe31092 HS	217	"upd=run load update\0" \
	218	"mtdids=" MTDIDS_DEFAULT "\0" \
	219	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	220
a784c01a	221	/* additions for new relocation code, must be added to all boards */
ab86f72c HS	222	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
ab86f72c HS	223	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
25ddd1fb	224	GENERATED_GBL_DATA_SIZE)
bbe31092	225	#endif /* __IMX27LITE_COMMON_CONFIG_H */