projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 03efcb05 HS |
1 | /* |
| 2 | * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. | |
| 3 | * Based on: | |
| 4 | * U-Boot:include/configs/da850evm.h | |
| 5 | * | |
| 6 | * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ | |
| 7 | * | |
| 8 | * Based on davinci_dvevm.h. Original Copyrights follow: | |
| 9 | * | |
| 10 | * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> | |
| 11 | * | |
| 12 | * SPDX-License-Identifier: GPL-2.0+ | |
| 13 | */ | |
| 14 | ||
| 15 | #ifndef __CONFIG_H | |
| 16 | #define __CONFIG_H | |
| 17 | ||
| 18 | /* | |
| 19 | * Board | |
| 20 | */ | |
| 21 | #define CONFIG_DRIVER_TI_EMAC | |
| 22 | #define CONFIG_BARIX_IPAM390 | |
| 23 | ||
| 24 | /* | |
| 25 | * SoC Configuration | |
| 26 | */ | |
| 27 | #define CONFIG_MACH_DAVINCI_DA850_EVM | |
| 28 | #define CONFIG_ARM926EJS /* arm926ejs CPU core */ | |
| 29 | #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ | |
| 30 | #define CONFIG_SOC_DA850 /* TI DA850 SoC */ | |
| 31 | #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH | |
| 32 | #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) | |
| 33 | #define CONFIG_SYS_OSCIN_FREQ 24000000 | |
| 34 | #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE | |
| 35 | #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) | |
| 03efcb05 HS |
36 | #define CONFIG_SYS_DA850_PLL_INIT |
| 37 | #define CONFIG_SYS_DA850_DDR_INIT | |
| 38 | #define CONFIG_SYS_TEXT_BASE 0xc1080000 | |
| 39 | ||
| 40 | /* | |
| 41 | * Memory Info | |
| 42 | */ | |
| 43 | #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ | |
| 44 | #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ | |
| 45 | #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ | |
| 46 | #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ | |
| 47 | ||
| 48 | /* memtest start addr */ | |
| 49 | #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) | |
| 50 | ||
| 51 | /* memtest will be run on 16MB */ | |
| 52 | #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024) | |
| 53 | ||
| 54 | #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ | |
| 55 | ||
| 56 | #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ | |
| 57 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ | |
| 58 | DAVINCI_SYSCFG_SUSPSRC_UART2 | \ | |
| 59 | DAVINCI_SYSCFG_SUSPSRC_UART0 | \ | |
| 60 | DAVINCI_SYSCFG_SUSPSRC_EMAC) | |
| 61 | ||
| 62 | /* | |
| 63 | * PLL configuration | |
| 64 | */ | |
| 65 | #define CONFIG_SYS_DV_CLKMODE 0 | |
| 66 | #define CONFIG_SYS_DA850_PLL0_POSTDIV 1 | |
| 67 | #define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 | |
| 68 | #define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 | |
| 69 | #define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 | |
| 70 | #define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 | |
| 71 | #define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 | |
| 72 | #define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 | |
| 73 | #define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 | |
| 74 | ||
| 75 | #define CONFIG_SYS_DA850_PLL1_POSTDIV 1 | |
| 76 | #define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 | |
| 77 | #define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 | |
| 78 | #define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002 | |
| 79 | ||
| 80 | #define CONFIG_SYS_DA850_PLL0_PLLM 24 | |
| 81 | #define CONFIG_SYS_DA850_PLL1_PLLM 24 | |
| 82 | ||
| 83 | /* | |
| 84 | * DDR2 memory configuration | |
| 85 | */ | |
| 86 | #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ | |
| 87 | DV_DDR_PHY_EXT_STRBEN | \ | |
| 88 | (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT)) | |
| 89 | #define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000498 | |
| 90 | ||
| 91 | #define CONFIG_SYS_DA850_DDR2_SDBCR2 0x00000004 | |
| 92 | #define CONFIG_SYS_DA850_DDR2_PBBPR 0x00000020 | |
| 93 | ||
| 94 | ||
| 95 | #define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ | |
| 96 | (13 << DV_DDR_SDTMR1_RFC_SHIFT) | \ | |
| 97 | (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ | |
| 98 | (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ | |
| 99 | (2 << DV_DDR_SDTMR1_WR_SHIFT) | \ | |
| 100 | (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ | |
| 101 | (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ | |
| 102 | (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ | |
| 103 | (1 << DV_DDR_SDTMR1_WTR_SHIFT)) | |
| 104 | ||
| 105 | #define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ | |
| 106 | (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ | |
| 107 | (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ | |
| 108 | (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ | |
| 109 | (14 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ | |
| 110 | (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ | |
| 111 | (1 << DV_DDR_SDTMR2_RTP_SHIFT) | \ | |
| 112 | (2 << DV_DDR_SDTMR2_CKE_SHIFT)) | |
| 113 | ||
| 114 | #define CONFIG_SYS_DA850_DDR2_SDBCR ( \ | |
| 115 | (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ | |
| 116 | (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) | \ | |
| 117 | (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ | |
| 118 | (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ | |
| 119 | (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ | |
| 120 | (2 << DV_DDR_SDCR_CL_SHIFT) | \ | |
| 121 | (3 << DV_DDR_SDCR_IBANK_SHIFT) | \ | |
| 122 | (2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) | |
| 123 | ||
| 124 | #define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(2) | \ | |
| 125 | DAVINCI_ABCR_WSTROBE(2) | \ | |
| 126 | DAVINCI_ABCR_WHOLD(1) | \ | |
| 127 | DAVINCI_ABCR_RSETUP(1) | \ | |
| 128 | DAVINCI_ABCR_RSTROBE(4) | \ | |
| 129 | DAVINCI_ABCR_RHOLD(0) | \ | |
| 130 | DAVINCI_ABCR_TA(1) | \ | |
| 131 | DAVINCI_ABCR_ASIZE_8BIT) | |
| 132 | ||
| 133 | ||
| 134 | /* | |
| 135 | * Serial Driver info | |
| 136 | */ | |
| 137 | #define CONFIG_SYS_NS16550 | |
| 138 | #define CONFIG_SYS_NS16550_SERIAL | |
| 139 | #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ | |
| 140 | #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ | |
| 141 | #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) | |
| 142 | #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ | |
| 143 | #define CONFIG_BAUDRATE 115200 /* Default baud rate */ | |
| 144 | ||
| 145 | /* | |
| 146 | * Flash & Environment | |
| 147 | */ | |
| 148 | #define CONFIG_NAND_DAVINCI | |
| 149 | #define CONFIG_SYS_NO_FLASH | |
| 150 | #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ | |
| 151 | #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ | |
| 152 | #define CONFIG_ENV_SIZE (128 << 10) | |
| 153 | #define CONFIG_SYS_NAND_USE_FLASH_BBT | |
| 154 | #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST | |
| 155 | #define CONFIG_SYS_NAND_PAGE_2K | |
| 156 | #define CONFIG_SYS_NAND_CS 3 | |
| 157 | #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE | |
| 158 | #define CONFIG_SYS_NAND_MASK_CLE 0x10 | |
| 159 | #define CONFIG_SYS_NAND_MASK_ALE 0x8 | |
| 160 | #undef CONFIG_SYS_NAND_HW_ECC | |
| 161 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ | |
| 162 | #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST | |
| 163 | #define CONFIG_SYS_NAND_5_ADDR_CYCLE | |
| 164 | #define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) | |
| 165 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) | |
| 166 | #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 | |
| 167 | #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x120000 | |
| 168 | #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 | |
| 169 | #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST | |
| 170 | #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ | |
| 171 | CONFIG_SYS_NAND_U_BOOT_SIZE - \ | |
| 172 | CONFIG_SYS_MALLOC_LEN - \ | |
| 173 | GENERATED_GBL_DATA_SIZE) | |
| 174 | #define CONFIG_SYS_NAND_ECCPOS { \ | |
| 175 | 24, 25, 26, 27, 28, \ | |
| 176 | 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ | |
| 177 | 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ | |
| 178 | 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ | |
| 179 | 59, 60, 61, 62, 63 } | |
| 180 | #define CONFIG_SYS_NAND_PAGE_COUNT 64 | |
| 181 | #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 | |
| 182 | #define CONFIG_SYS_NAND_ECCSIZE 512 | |
| 183 | #define CONFIG_SYS_NAND_ECCBYTES 10 | |
| 184 | #define CONFIG_SYS_NAND_OOBSIZE 64 | |
| 185 | #define CONFIG_SPL_NAND_SUPPORT | |
| 186 | #define CONFIG_SPL_NAND_BASE | |
| 187 | #define CONFIG_SPL_NAND_DRIVERS | |
| 188 | #define CONFIG_SPL_NAND_ECC | |
| 189 | #define CONFIG_SPL_NAND_SIMPLE | |
| 190 | #define CONFIG_SPL_NAND_LOAD | |
| 191 | ||
| 192 | /* | |
| 193 | * Network & Ethernet Configuration | |
| 194 | */ | |
| 195 | #ifdef CONFIG_DRIVER_TI_EMAC | |
| 196 | #define CONFIG_DRIVER_TI_EMAC_USE_RMII | |
| 197 | #define CONFIG_BOOTP_DEFAULT | |
| 198 | #define CONFIG_BOOTP_DNS | |
| 199 | #define CONFIG_BOOTP_DNS2 | |
| 200 | #define CONFIG_BOOTP_SEND_HOSTNAME | |
| 201 | #define CONFIG_NET_RETRY_COUNT 10 | |
| 202 | #endif | |
| 203 | ||
| 204 | /* | |
| 205 | * U-Boot general configuration | |
| 206 | */ | |
| 207 | #define CONFIG_MISC_INIT_R | |
| 208 | #define CONFIG_BOARD_EARLY_INIT_F | |
| 209 | #define CONFIG_BOOTFILE "uImage" /* Boot file name */ | |
| 210 | #define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */ | |
| 211 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 212 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 213 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 214 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ | |
| 215 | #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) | |
| 216 | #define CONFIG_VERSION_VARIABLE | |
| 217 | #define CONFIG_AUTO_COMPLETE | |
| 218 | #define CONFIG_SYS_HUSH_PARSER | |
| 219 | #define CONFIG_CMDLINE_EDITING | |
| 220 | #define CONFIG_SYS_LONGHELP | |
| 221 | #define CONFIG_CRC32_VERIFY | |
| 222 | #define CONFIG_MX_CYCLIC | |
| 223 | ||
| 224 | /* | |
| 225 | * Linux Information | |
| 226 | */ | |
| 227 | #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) | |
| 228 | #define CONFIG_HWCONFIG /* enable hwconfig */ | |
| 229 | #define CONFIG_CMDLINE_TAG | |
| 230 | #define CONFIG_REVISION_TAG | |
| 231 | #define CONFIG_SETUP_MEMORY_TAGS | |
| 232 | #define CONFIG_BOOTARGS \ | |
| 233 | "mem=128M console=ttyS0,115200n8 root=/dev/mtdblock0p4 rw noinitrd ip=dhcp" | |
| 234 | #define CONFIG_BOOTDELAY 3 | |
| 235 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 236 | "hwconfig=dsp:wake=yes\0" \ | |
| 237 | "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ | |
| 238 | "mtdids=" MTDIDS_DEFAULT "\0" \ | |
| 239 | "mtdparts=" MTDPARTS_DEFAULT "\0" \ | |
| 240 | "setbootparms=nand read c0100000 200000 400000;" \ | |
| 241 | "spl export atags c0100000;" \ | |
| 242 | "nand erase.part bootparms;" \ | |
| 243 | "nand write c0000100 180000 20000\0" \ | |
| 244 | "\0" | |
| 245 | ||
| 246 | /* | |
| 247 | * U-Boot commands | |
| 248 | */ | |
| 249 | #include <config_cmd_default.h> | |
| 250 | #define CONFIG_CMD_ENV | |
| 251 | #define CONFIG_CMD_ASKENV | |
| 252 | #define CONFIG_CMD_DHCP | |
| 253 | #define CONFIG_CMD_DIAG | |
| 254 | #define CONFIG_CMD_MII | |
| 255 | #define CONFIG_CMD_PING | |
| 256 | #define CONFIG_CMD_SAVES | |
| 257 | #define CONFIG_CMD_MEMORY | |
| 258 | ||
| 259 | #ifdef CONFIG_CMD_BDI | |
| 260 | #define CONFIG_CLOCKS | |
| 261 | #endif | |
| 262 | ||
| 263 | #ifndef CONFIG_DRIVER_TI_EMAC | |
| 264 | #undef CONFIG_CMD_NET | |
| 265 | #undef CONFIG_CMD_DHCP | |
| 266 | #undef CONFIG_CMD_MII | |
| 267 | #undef CONFIG_CMD_PING | |
| 268 | #endif | |
| 269 | ||
| 270 | #define CONFIG_CMD_NAND | |
| 271 | #define CONFIG_CMD_NAND_TRIMFFS | |
| 272 | ||
| 273 | #define CONFIG_CMD_MTDPARTS | |
| 274 | #define CONFIG_MTD_DEVICE | |
| 275 | #define CONFIG_MTD_PARTITIONS | |
| 276 | #define CONFIG_LZO | |
| 277 | #define CONFIG_RBTREE | |
| 278 | #define CONFIG_CMD_UBI | |
| 279 | #define CONFIG_CMD_UBIFS | |
| 280 | ||
| 281 | #define MTDIDS_NAME_STR "davinci_nand.0" | |
| 282 | #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR | |
| 283 | #define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \ | |
| 284 | "128k(u-boot-env)," \ | |
| 285 | "1408k(u-boot)," \ | |
| 286 | "128k(bootparms)," \ | |
| 287 | "384k(factory-info)," \ | |
| 288 | "4M(kernel)," \ | |
| 289 | "-(rootfs)" | |
| 290 | ||
| 291 | /* defines for SPL */ | |
| 292 | #define CONFIG_SPL | |
| 293 | #define CONFIG_SPL_FRAMEWORK | |
| 294 | #define CONFIG_SPL_BOARD_INIT | |
| 295 | #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ | |
| 296 | CONFIG_SYS_MALLOC_LEN) | |
| 297 | #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN | |
| 298 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 299 | #define CONFIG_SPL_LIBCOMMON_SUPPORT | |
| 300 | #define CONFIG_SPL_LIBGENERIC_SUPPORT | |
| 301 | #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" | |
| 302 | #define CONFIG_SPL_STACK 0x8001ff00 | |
| 303 | #define CONFIG_SPL_TEXT_BASE 0x80000000 | |
| 304 | #define CONFIG_SPL_MAX_SIZE 0x20000 | |
| 305 | #define CONFIG_SPL_MAX_FOOTPRINT 32768 | |
| 306 | ||
| 307 | /* additions for new relocation code, must added to all boards */ | |
| 308 | #define CONFIG_SYS_SDRAM_BASE 0xc0000000 | |
| 309 | ||
| 310 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ | |
| 311 | GENERATED_GBL_DATA_SIZE) | |
| 312 | ||
| 313 | /* add FALCON boot mode */ | |
| 314 | #define CONFIG_CMD_SPL | |
| 315 | #define CONFIG_SPL_OS_BOOT | |
| 316 | #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 | |
| 317 | #define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR | |
| 318 | #define CONFIG_CMD_SPL_NAND_OFS 0x00180000 | |
| 319 | #define CONFIG_CMD_SPL_WRITE_SIZE 0x400 | |
| 320 | ||
| 321 | /* GPIO support */ | |
| 322 | #define CONFIG_SPL_GPIO_SUPPORT | |
| 323 | #define CONFIG_DA8XX_GPIO | |
| 324 | #define CONFIG_IPAM390_GPIO_BOOTMODE ((16 * 7) + 14) | |
| 325 | ||
| 326 | #define CONFIG_SHOW_BOOT_PROGRESS | |
| 327 | #define CONFIG_IPAM390_GPIO_LED_RED ((16 * 7) + 11) | |
| 328 | #define CONFIG_IPAM390_GPIO_LED_GREEN ((16 * 7) + 12) | |
| 329 | ||
| 330 | #endif /* __CONFIG_H */ |