[people/ms/u-boot.git] / include / configs / ls1021atwr.h

/*
 * Copyright 2014 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_LS102XA

#define CONFIG_ARMV7_PSCI
#define CONFIG_ARMV7_PSCI_NR_CPUS	CONFIG_MAX_CPUS

#define CONFIG_SYS_FSL_CLK

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DEEP_SLEEP
#ifdef CONFIG_DEEP_SLEEP
#define CONFIG_SILENT_CONSOLE
#endif

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 16 * 1024 * 1024)

#define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE

/*
 * USB
 */

/*
 * EHCI Support - disbaled by default as
 * there is no signal coming out of soc on
 * this board for this controller. However,
 * the silicon still has this controller,
 * and anyone can use this controller by
 * taking signals out on their board.
 */

/*#define CONFIG_HAS_FSL_DR_USB*/

#ifdef CONFIG_HAS_FSL_DR_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#endif

/* XHCI Support - enabled by default */
#define CONFIG_HAS_FSL_XHCI_USB

#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
#endif

#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
#define CONFIG_USB_STORAGE
#endif

/*
 * Generic Timer Definitions
 */
#define GENERIC_TIMER_CLK		12500000

#define CONFIG_SYS_CLK_FREQ		100000000
#define CONFIG_DDR_CLK_FREQ		100000000

#define DDR_SDRAM_CFG			0x470c0008
#define DDR_CS0_BNDS			0x008000bf
#define DDR_CS0_CONFIG			0x80014302
#define DDR_TIMING_CFG_0		0x50550004
#define DDR_TIMING_CFG_1		0xbcb38c56
#define DDR_TIMING_CFG_2		0x0040d120
#define DDR_TIMING_CFG_3		0x010e1000
#define DDR_TIMING_CFG_4		0x00000001
#define DDR_TIMING_CFG_5		0x03401400
#define DDR_SDRAM_CFG_2			0x00401010
#define DDR_SDRAM_MODE			0x00061c60
#define DDR_SDRAM_MODE_2		0x00180000
#define DDR_SDRAM_INTERVAL		0x18600618
#define DDR_DDR_WRLVL_CNTL		0x8655f605
#define DDR_DDR_WRLVL_CNTL_2		0x05060607
#define DDR_DDR_WRLVL_CNTL_3		0x05050505
#define DDR_DDR_CDR1			0x80040000
#define DDR_DDR_CDR2			0x00000001
#define DDR_SDRAM_CLK_CNTL		0x02000000
#define DDR_DDR_ZQ_CNTL			0x89080600
#define DDR_CS0_CONFIG_2		0
#define DDR_SDRAM_CFG_MEM_EN		0x80000000
#define SDRAM_CFG2_D_INIT		0x00000010
#define DDR_CDR2_VREF_TRAIN_EN		0x00000080
#define SDRAM_CFG2_FRC_SR		0x80000000
#define SDRAM_CFG_BI			0x00000001

#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021atwr/ls102xa_pbi.cfg
#endif

#ifdef CONFIG_SD_BOOT
#ifdef CONFIG_SD_BOOT_QSPI
#define CONFIG_SYS_FSL_PBL_RCW	\
	board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
#else
#define CONFIG_SYS_FSL_PBL_RCW	\
	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
#endif
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8

#ifdef CONFIG_SECURE_BOOT
#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
/*
 * HDR would be appended at end of image and copied to DDR along
 * with U-Boot image.
 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		(0x400 + \
		(CONFIG_U_BOOT_HDR_SIZE / 512)
#else
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
#endif /* ifdef CONFIG_SECURE_BOOT */

#define CONFIG_SPL_TEXT_BASE		0x10000000
#define CONFIG_SPL_MAX_SIZE		0x1a000
#define CONFIG_SPL_STACK		0x1001d000
#define CONFIG_SPL_PAD_TO		0x1c000
#define CONFIG_SYS_TEXT_BASE		0x82000000

#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
		CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
#define CONFIG_SPL_BSS_START_ADDR	0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000

#ifdef CONFIG_U_BOOT_HDR_SIZE
/*
 * HDR would be appended at end of image and copied to DDR along
 * with U-Boot image. Here u-boot max. size is 512K. So if binary
 * size increases then increase this size in case of secure boot as
 * it uses raw u-boot image instead of fit image.
 */
#define CONFIG_SYS_MONITOR_LEN		(0x80000 + CONFIG_U_BOOT_HDR_SIZE)
#else
#define CONFIG_SYS_MONITOR_LEN		0x80000
#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
#endif

#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE		0x40010000
#endif

#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_NO_FLASH
#endif

#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE		0x60100000
#endif

#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			0x80000000
#define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)

#define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_SYS_HAS_SERDES

#define CONFIG_FSL_CAAM			/* Enable CAAM */

#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
	!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif

/*
 * IFC Definitions
 */
#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE		0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE

#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
				CSPR_PORT_SIZE_16 | \
				CSPR_MSEL_NOR | \
				CSPR_V)
#define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)

/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
					CSOR_NOR_TRHZ_80)
#define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
					FTIM0_NOR_TEADC(0x5) | \
					FTIM0_NOR_TAVDS(0x0) | \
					FTIM0_NOR_TEAHC(0x5))
#define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
					FTIM1_NOR_TRAD_NOR(0x1A) | \
					FTIM1_NOR_TSEQRAD_NOR(0x13))
#define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
					FTIM2_NOR_TCH(0x4) | \
					FTIM2_NOR_TWP(0x1c) | \
					FTIM2_NOR_TWPH(0x0e))
#define CONFIG_SYS_NOR_FTIM3		0

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }

#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_SYS_WRITE_SWAPPED_DATA
#endif

/* CPLD */

#define CONFIG_SYS_CPLD_BASE	0x7fb00000
#define CPLD_BASE_PHYS		CONFIG_SYS_CPLD_BASE

#define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
#define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
					CSPR_PORT_SIZE_8 | \
					CSPR_MSEL_GPCM | \
					CSPR_V)
#define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
#define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
					CSOR_NOR_NOR_MODE_AVD_NOR | \
					CSOR_NOR_TRHZ_80)

/* CPLD Timing parameters for IFC GPCM */
#define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xf) | \
					FTIM0_GPCM_TEADC(0xf) | \
					FTIM0_GPCM_TEAHC(0xf))
#define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
					FTIM1_GPCM_TRAD(0x3f))
#define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
					FTIM2_GPCM_TCH(0xf) | \
					FTIM2_GPCM_TWP(0xff))
#define CONFIG_SYS_FPGA_FTIM3           0x0
#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_FPGA_CSPR_EXT
#define CONFIG_SYS_CSPR1		CONFIG_SYS_FPGA_CSPR
#define CONFIG_SYS_AMASK1		CONFIG_SYS_FPGA_AMASK
#define CONFIG_SYS_CSOR1		CONFIG_SYS_FPGA_CSOR
#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_FPGA_FTIM0
#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_FPGA_FTIM1
#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_FPGA_FTIM2
#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_FPGA_FTIM3

/*
 * Serial Port
 */
#ifdef CONFIG_LPUART
#define CONFIG_LPUART_32B_REG
#else
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_SERIAL
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#endif
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
#endif

#define CONFIG_BAUDRATE			115200

/*
 * I2C
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */

/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM		1
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5

/*
 * MMC
 */
#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC

#define CONFIG_DOS_PARTITION

/* SPI */
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
/* QSPI */
#define QSPI0_AMBA_BASE			0x40000000
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2

/* DSPI */
#endif

/* DM SPI */
#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
#define CONFIG_DM_SPI_FLASH
#endif

/*
 * Video
 */
#define CONFIG_FSL_DCU_FB

#ifdef CONFIG_FSL_DCU_FB
#define CONFIG_VIDEO
#define CONFIG_CMD_BMP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

#define CONFIG_FSL_DCU_SII9022A
#define CONFIG_SYS_I2C_DVI_BUS_NUM	1
#define CONFIG_SYS_I2C_DVI_ADDR		0x39
#endif

/*
 * eTSEC
 */
#define CONFIG_TSEC_ENET

#ifdef CONFIG_TSEC_ENET
#define CONFIG_MII
#define CONFIG_MII_DEFAULT_TSEC		1
#define CONFIG_TSEC1			1
#define CONFIG_TSEC1_NAME		"eTSEC1"
#define CONFIG_TSEC2			1
#define CONFIG_TSEC2_NAME		"eTSEC2"
#define CONFIG_TSEC3			1
#define CONFIG_TSEC3_NAME		"eTSEC3"

#define TSEC1_PHY_ADDR			2
#define TSEC2_PHY_ADDR			0
#define TSEC3_PHY_ADDR			1

#define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC3_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)

#define TSEC1_PHYIDX			0
#define TSEC2_PHYIDX			0
#define TSEC3_PHYIDX			0

#define CONFIG_ETHPRIME			"eTSEC1"

#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
#endif

/* PCIe */
#define CONFIG_PCI		/* Enable PCI/PCIE */
#define CONFIG_PCIE1		/* PCIE controller 1 */
#define CONFIG_PCIE2		/* PCIE controller 2 */
#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"

#define CONFIG_SYS_PCI_64BIT

#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */

#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */

#define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
#define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */

#ifdef CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_CMD_PCI
#endif

#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING

#define CONFIG_ARMV7_NONSEC
#define CONFIG_ARMV7_VIRT
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR		0x01ee0200
#define CONFIG_TIMER_CLK_FREQ		12500000

#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE		256

#define CONFIG_FSL_DEVICE_DISABLE


#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS       \
	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
	"initrd_high=0xffffffff\0"      \
	"fdt_high=0xffffffff\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
	"initrd_high=0xffffffff\0"      \
	"fdt_high=0xffffffff\0"
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff

#define CONFIG_SYS_LOAD_ADDR		0x82000000

#define CONFIG_LS102XA_STREAM_ID

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(30 * 1024)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
#endif

#define CONFIG_SYS_QE_FW_ADDR     0x600c0000

/*
 * Environment
 */
#define CONFIG_ENV_OVERWRITE

#if defined(CONFIG_SD_BOOT)
#define CONFIG_ENV_OFFSET		0x100000
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_SIZE			0x20000
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_OFFSET		0x100000
#define CONFIG_ENV_SECT_SIZE		0x10000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE			0x20000
#define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
#endif

#define CONFIG_MISC_INIT_R

/* Hash command with SHA acceleration supported in hardware */
#ifdef CONFIG_FSL_CAAM
#define CONFIG_CMD_HASH
#define CONFIG_SHA_HW_ACCEL
#endif

#include <asm/fsl_secure_boot.h>
#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */

#endif
Commit	Line	Data
c8a7d9da WH	1	/*
	2	* Copyright 2014 Freescale Semiconductor, Inc.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
c8a7d9da WH	10	#define CONFIG_LS102XA
c8a7d9da WH	11
340848b1	12	#define CONFIG_ARMV7_PSCI
dbf38aab	13	#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS
340848b1	14
18fb0e3c	15	#define CONFIG_SYS_FSL_CLK
c8a7d9da WH	16
	17	#define CONFIG_DISPLAY_CPUINFO
	18	#define CONFIG_DISPLAY_BOARDINFO
	19
	20	#define CONFIG_SKIP_LOWLEVEL_INIT
	21	#define CONFIG_BOARD_EARLY_INIT_F
99e1bd42 TY	22	#define CONFIG_DEEP_SLEEP
	23	#ifdef CONFIG_DEEP_SLEEP
	24	#define CONFIG_SILENT_CONSOLE
	25	#endif
c8a7d9da WH	26
	27	/*
	28	* Size of malloc() pool
	29	*/
	30	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
	31
	32	#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
	33	#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
	34
10a28644 RM	35	/*
	36	* USB
	37	*/
	38
	39	/*
	40	* EHCI Support - disbaled by default as
	41	* there is no signal coming out of soc on
	42	* this board for this controller. However,
	43	* the silicon still has this controller,
	44	* and anyone can use this controller by
	45	* taking signals out on their board.
	46	*/
	47
	48	/#define CONFIG_HAS_FSL_DR_USB/
	49
	50	#ifdef CONFIG_HAS_FSL_DR_USB
	51	#define CONFIG_USB_EHCI
	52	#define CONFIG_USB_EHCI_FSL
	53	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	54	#endif
	55
	56	/* XHCI Support - enabled by default */
	57	#define CONFIG_HAS_FSL_XHCI_USB
	58
	59	#ifdef CONFIG_HAS_FSL_XHCI_USB
	60	#define CONFIG_USB_XHCI_FSL
10a28644 RM	61	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
	62	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
	63	#endif
	64
	65	#if defined(CONFIG_HAS_FSL_DR_USB) \|\| defined(CONFIG_HAS_FSL_XHCI_USB)
10a28644	66	#define CONFIG_USB_STORAGE
10a28644 RM	67	#endif
10a28644 RM	68
c8a7d9da WH	69	/*
	70	* Generic Timer Definitions
	71	*/
	72	#define GENERIC_TIMER_CLK 12500000
	73
	74	#define CONFIG_SYS_CLK_FREQ 100000000
	75	#define CONFIG_DDR_CLK_FREQ 100000000
	76
a88cc3bd YS	77	#define DDR_SDRAM_CFG 0x470c0008
	78	#define DDR_CS0_BNDS 0x008000bf
	79	#define DDR_CS0_CONFIG 0x80014302
	80	#define DDR_TIMING_CFG_0 0x50550004
	81	#define DDR_TIMING_CFG_1 0xbcb38c56
	82	#define DDR_TIMING_CFG_2 0x0040d120
	83	#define DDR_TIMING_CFG_3 0x010e1000
	84	#define DDR_TIMING_CFG_4 0x00000001
	85	#define DDR_TIMING_CFG_5 0x03401400
	86	#define DDR_SDRAM_CFG_2 0x00401010
	87	#define DDR_SDRAM_MODE 0x00061c60
	88	#define DDR_SDRAM_MODE_2 0x00180000
	89	#define DDR_SDRAM_INTERVAL 0x18600618
	90	#define DDR_DDR_WRLVL_CNTL 0x8655f605
	91	#define DDR_DDR_WRLVL_CNTL_2 0x05060607
	92	#define DDR_DDR_WRLVL_CNTL_3 0x05050505
	93	#define DDR_DDR_CDR1 0x80040000
	94	#define DDR_DDR_CDR2 0x00000001
	95	#define DDR_SDRAM_CLK_CNTL 0x02000000
	96	#define DDR_DDR_ZQ_CNTL 0x89080600
	97	#define DDR_CS0_CONFIG_2 0
	98	#define DDR_SDRAM_CFG_MEM_EN 0x80000000
99e1bd42 TY	99	#define SDRAM_CFG2_D_INIT 0x00000010
	100	#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
	101	#define SDRAM_CFG2_FRC_SR 0x80000000
	102	#define SDRAM_CFG_BI 0x00000001
a88cc3bd	103
8415bb68 AW	104	#ifdef CONFIG_RAMBOOT_PBL
	105	#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
	106	#endif
	107
	108	#ifdef CONFIG_SD_BOOT
947cee11 AW	109	#ifdef CONFIG_SD_BOOT_QSPI
	110	#define CONFIG_SYS_FSL_PBL_RCW \
	111	board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
	112	#else
	113	#define CONFIG_SYS_FSL_PBL_RCW \
	114	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
	115	#endif
8415bb68 AW	116	#define CONFIG_SPL_FRAMEWORK
	117	#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
	118	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	119	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	120	#define CONFIG_SPL_ENV_SUPPORT
	121	#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
	122	#define CONFIG_SPL_I2C_SUPPORT
	123	#define CONFIG_SPL_WATCHDOG_SUPPORT
	124	#define CONFIG_SPL_SERIAL_SUPPORT
	125	#define CONFIG_SPL_MMC_SUPPORT
	126	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
e7e720c2 SG	127
	128	#ifdef CONFIG_SECURE_BOOT
	129	#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
	130	/*
	131	* HDR would be appended at end of image and copied to DDR along
	132	* with U-Boot image.
	133	*/
	134	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (0x400 + \
	135	(CONFIG_U_BOOT_HDR_SIZE / 512)
	136	#else
8415bb68	137	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
e7e720c2	138	#endif /* ifdef CONFIG_SECURE_BOOT */
8415bb68 AW	139
	140	#define CONFIG_SPL_TEXT_BASE 0x10000000
	141	#define CONFIG_SPL_MAX_SIZE 0x1a000
	142	#define CONFIG_SPL_STACK 0x1001d000
	143	#define CONFIG_SPL_PAD_TO 0x1c000
	144	#define CONFIG_SYS_TEXT_BASE 0x82000000
	145
99e1bd42 TY	146	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
99e1bd42 TY	147	CONFIG_SYS_MONITOR_LEN)
8415bb68 AW	148	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	149	#define CONFIG_SPL_BSS_START_ADDR 0x80100000
	150	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
e7e720c2 SG	151
	152	#ifdef CONFIG_U_BOOT_HDR_SIZE
	153	/*
	154	* HDR would be appended at end of image and copied to DDR along
	155	* with U-Boot image. Here u-boot max. size is 512K. So if binary
	156	* size increases then increase this size in case of secure boot as
	157	* it uses raw u-boot image instead of fit image.
	158	*/
	159	#define CONFIG_SYS_MONITOR_LEN (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
	160	#else
8415bb68	161	#define CONFIG_SYS_MONITOR_LEN 0x80000
e7e720c2	162	#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
8415bb68 AW	163	#endif
8415bb68 AW	164
d612f0ab AW	165	#ifdef CONFIG_QSPI_BOOT
d612f0ab AW	166	#define CONFIG_SYS_TEXT_BASE 0x40010000
947cee11 AW	167	#endif
	168
	169	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
d612f0ab AW	170	#define CONFIG_SYS_NO_FLASH
	171	#endif
	172
c8a7d9da	173	#ifndef CONFIG_SYS_TEXT_BASE
1c69a51c	174	#define CONFIG_SYS_TEXT_BASE 0x60100000
c8a7d9da WH	175	#endif
	176
	177	#define CONFIG_NR_DRAM_BANKS 1
	178	#define PHYS_SDRAM 0x80000000
	179	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
	180
	181	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
	182	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	183
	184	#define CONFIG_SYS_HAS_SERDES
	185
4ba4a095 RG	186	#define CONFIG_FSL_CAAM /* Enable CAAM */
4ba4a095 RG	187
4c59ab9c AW	188	#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
4c59ab9c AW	189	!defined(CONFIG_QSPI_BOOT)
eaa859e7 ZQ	190	#define CONFIG_U_QE
	191	#endif
	192
c8a7d9da WH	193	/*
	194	* IFC Definitions
	195	*/
947cee11	196	#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
c8a7d9da WH	197	#define CONFIG_FSL_IFC
	198	#define CONFIG_SYS_FLASH_BASE 0x60000000
	199	#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
	200
	201	#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
	202	#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \| \
	203	CSPR_PORT_SIZE_16 \| \
	204	CSPR_MSEL_NOR \| \
	205	CSPR_V)
	206	#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
	207
	208	/* NOR Flash Timing Params */
	209	#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) \| \
	210	CSOR_NOR_TRHZ_80)
	211	#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) \| \
	212	FTIM0_NOR_TEADC(0x5) \| \
	213	FTIM0_NOR_TAVDS(0x0) \| \
	214	FTIM0_NOR_TEAHC(0x5))
	215	#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) \| \
	216	FTIM1_NOR_TRAD_NOR(0x1A) \| \
	217	FTIM1_NOR_TSEQRAD_NOR(0x13))
	218	#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) \| \
	219	FTIM2_NOR_TCH(0x4) \| \
	220	FTIM2_NOR_TWP(0x1c) \| \
	221	FTIM2_NOR_TWPH(0x0e))
	222	#define CONFIG_SYS_NOR_FTIM3 0
	223
	224	#define CONFIG_FLASH_CFI_DRIVER
	225	#define CONFIG_SYS_FLASH_CFI
	226	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	227	#define CONFIG_SYS_FLASH_QUIET_TEST
	228	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
	229
	230	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
	231	#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
	232	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	233	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
	234
	235	#define CONFIG_SYS_FLASH_EMPTY_INFO
	236	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
	237
	238	#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
272c5265	239	#define CONFIG_SYS_WRITE_SWAPPED_DATA
d612f0ab	240	#endif
c8a7d9da WH	241
	242	/* CPLD */
	243
	244	#define CONFIG_SYS_CPLD_BASE 0x7fb00000
	245	#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
	246
	247	#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
	248	#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) \| \
	249	CSPR_PORT_SIZE_8 \| \
	250	CSPR_MSEL_GPCM \| \
	251	CSPR_V)
	252	#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
	253	#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) \| \
	254	CSOR_NOR_NOR_MODE_AVD_NOR \| \
	255	CSOR_NOR_TRHZ_80)
	256
	257	/* CPLD Timing parameters for IFC GPCM */
	258	#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) \| \
	259	FTIM0_GPCM_TEADC(0xf) \| \
	260	FTIM0_GPCM_TEAHC(0xf))
	261	#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) \| \
	262	FTIM1_GPCM_TRAD(0x3f))
	263	#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) \| \
	264	FTIM2_GPCM_TCH(0xf) \| \
	265	FTIM2_GPCM_TWP(0xff))
	266	#define CONFIG_SYS_FPGA_FTIM3 0x0
	267	#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
	268	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
	269	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
	270	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
	271	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
	272	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
	273	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
	274	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
	275	#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
	276	#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
	277	#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
	278	#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
	279	#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
	280	#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
	281	#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
	282	#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
	283
	284	/*
	285	* Serial Port
	286	*/
55d53ab4	287	#ifdef CONFIG_LPUART
55d53ab4 AW	288	#define CONFIG_LPUART_32B_REG
55d53ab4 AW	289	#else
c8a7d9da	290	#define CONFIG_CONS_INDEX 1
c8a7d9da	291	#define CONFIG_SYS_NS16550_SERIAL
f833cd62	292	#ifndef CONFIG_DM_SERIAL
c8a7d9da	293	#define CONFIG_SYS_NS16550_REG_SIZE 1
f833cd62	294	#endif
c8a7d9da	295	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
55d53ab4	296	#endif
c8a7d9da WH	297
	298	#define CONFIG_BAUDRATE 115200
	299
	300	/*
	301	* I2C
	302	*/
c8a7d9da WH	303	#define CONFIG_SYS_I2C
c8a7d9da WH	304	#define CONFIG_SYS_I2C_MXC
03544c66 AA	305	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	306	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	307	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
c8a7d9da	308
5175a288	309	/* EEPROM */
5175a288 AW	310	#define CONFIG_ID_EEPROM
	311	#define CONFIG_SYS_I2C_EEPROM_NXID
	312	#define CONFIG_SYS_EEPROM_BUS_NUM 1
	313	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
	314	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	315	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	316	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
5175a288	317
c8a7d9da WH	318	/*
	319	* MMC
	320	*/
	321	#define CONFIG_MMC
c8a7d9da WH	322	#define CONFIG_FSL_ESDHC
	323	#define CONFIG_GENERIC_MMC
	324
8251ed23 AW	325	#define CONFIG_DOS_PARTITION
8251ed23 AW	326
9dd3d3c0	327	/* SPI */
947cee11	328	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
9dd3d3c0	329	/* QSPI */
d612f0ab AW	330	#define QSPI0_AMBA_BASE 0x40000000
	331	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	332	#define FSL_QSPI_FLASH_NUM 2
	333
03d1d568	334	/* DSPI */
03d1d568 YY	335	#endif
03d1d568 YY	336
9dd3d3c0 HW	337	/* DM SPI */
9dd3d3c0 HW	338	#if defined(CONFIG_FSL_DSPI) \|\| defined(CONFIG_FSL_QSPI)
9dd3d3c0 HW	339	#define CONFIG_DM_SPI_FLASH
9dd3d3c0 HW	340	#endif
d612f0ab	341
b4ecc8c6 WH	342	/*
	343	* Video
	344	*/
	345	#define CONFIG_FSL_DCU_FB
	346
	347	#ifdef CONFIG_FSL_DCU_FB
	348	#define CONFIG_VIDEO
	349	#define CONFIG_CMD_BMP
	350	#define CONFIG_CFB_CONSOLE
	351	#define CONFIG_VGA_AS_SINGLE_DEVICE
	352	#define CONFIG_VIDEO_LOGO
	353	#define CONFIG_VIDEO_BMP_LOGO
f8008f14	354	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
b4ecc8c6 WH	355
	356	#define CONFIG_FSL_DCU_SII9022A
	357	#define CONFIG_SYS_I2C_DVI_BUS_NUM 1
	358	#define CONFIG_SYS_I2C_DVI_ADDR 0x39
	359	#endif
	360
c8a7d9da WH	361	/*
	362	* eTSEC
	363	*/
	364	#define CONFIG_TSEC_ENET
	365
	366	#ifdef CONFIG_TSEC_ENET
	367	#define CONFIG_MII
	368	#define CONFIG_MII_DEFAULT_TSEC 1
	369	#define CONFIG_TSEC1 1
	370	#define CONFIG_TSEC1_NAME "eTSEC1"
	371	#define CONFIG_TSEC2 1
	372	#define CONFIG_TSEC2_NAME "eTSEC2"
	373	#define CONFIG_TSEC3 1
	374	#define CONFIG_TSEC3_NAME "eTSEC3"
	375
	376	#define TSEC1_PHY_ADDR 2
	377	#define TSEC2_PHY_ADDR 0
	378	#define TSEC3_PHY_ADDR 1
	379
	380	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	381	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	382	#define TSEC3_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	383
	384	#define TSEC1_PHYIDX 0
	385	#define TSEC2_PHYIDX 0
	386	#define TSEC3_PHYIDX 0
	387
	388	#define CONFIG_ETHPRIME "eTSEC1"
	389
	390	#define CONFIG_PHY_GIGE
	391	#define CONFIG_PHYLIB
	392	#define CONFIG_PHY_ATHEROS
	393
	394	#define CONFIG_HAS_ETH0
	395	#define CONFIG_HAS_ETH1
	396	#define CONFIG_HAS_ETH2
	397	#endif
	398
da419027 ML	399	/* PCIe */
da419027 ML	400	#define CONFIG_PCI /* Enable PCI/PCIE */
b38eaec5 RD	401	#define CONFIG_PCIE1 /* PCIE controller 1 */
b38eaec5 RD	402	#define CONFIG_PCIE2 /* PCIE controller 2 */
da419027 ML	403	#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
	404	#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
	405
180b8688 ML	406	#define CONFIG_SYS_PCI_64BIT
	407
	408	#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
	409	#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
	410	#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
	411	#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
	412
	413	#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
	414	#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
	415	#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
	416
	417	#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
	418	#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
	419	#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */
	420
	421	#ifdef CONFIG_PCI
180b8688	422	#define CONFIG_PCI_PNP
180b8688 ML	423	#define CONFIG_PCI_SCAN_SHOW
180b8688 ML	424	#define CONFIG_CMD_PCI
180b8688 ML	425	#endif
180b8688 ML	426
c8a7d9da WH	427	#define CONFIG_CMDLINE_TAG
c8a7d9da WH	428	#define CONFIG_CMDLINE_EDITING
8415bb68	429
1a2826f6 XL	430	#define CONFIG_ARMV7_NONSEC
	431	#define CONFIG_ARMV7_VIRT
	432	#define CONFIG_PEN_ADDR_BIG_ENDIAN
435acd83	433	#define CONFIG_LAYERSCAPE_NS_ACCESS
1a2826f6 XL	434	#define CONFIG_SMP_PEN_ADDR 0x01ee0200
1a2826f6 XL	435	#define CONFIG_TIMER_CLK_FREQ 12500000
1a2826f6	436
c8a7d9da	437	#define CONFIG_HWCONFIG
03c22449 ZZ	438	#define HWCONFIG_BUFFER_SIZE 256
	439
	440	#define CONFIG_FSL_DEVICE_DISABLE
c8a7d9da	441
c8a7d9da	442
55d53ab4 AW	443	#ifdef CONFIG_LPUART
	444	#define CONFIG_EXTRA_ENV_SETTINGS \
	445	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
7ff7166c AW	446	"initrd_high=0xffffffff\0" \
7ff7166c AW	447	"fdt_high=0xffffffff\0"
55d53ab4	448	#else
c8a7d9da WH	449	#define CONFIG_EXTRA_ENV_SETTINGS \
c8a7d9da WH	450	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
7ff7166c AW	451	"initrd_high=0xffffffff\0" \
7ff7166c AW	452	"fdt_high=0xffffffff\0"
55d53ab4	453	#endif
c8a7d9da WH	454
	455	/*
	456	* Miscellaneous configurable options
	457	*/
	458	#define CONFIG_SYS_LONGHELP /* undef to save memory */
c8a7d9da WH	459	#define CONFIG_AUTO_COMPLETE
	460	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	461	#define CONFIG_SYS_PBSIZE \
	462	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	463	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	464	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	465
c8a7d9da WH	466	#define CONFIG_SYS_MEMTEST_START 0x80000000
	467	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	468
	469	#define CONFIG_SYS_LOAD_ADDR 0x82000000
c8a7d9da	470
660673af XL	471	#define CONFIG_LS102XA_STREAM_ID
660673af XL	472
c8a7d9da WH	473	/*
	474	* Stack sizes
	475	* The stack sizes are set up in start.S using the settings below
	476	*/
	477	#define CONFIG_STACKSIZE (30 * 1024)
	478
	479	#define CONFIG_SYS_INIT_SP_OFFSET \
	480	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	481	#define CONFIG_SYS_INIT_SP_ADDR \
	482	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	483
8415bb68 AW	484	#ifdef CONFIG_SPL_BUILD
	485	#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
	486	#else
c8a7d9da	487	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
8415bb68	488	#endif
c8a7d9da	489
713bf94f	490	#define CONFIG_SYS_QE_FW_ADDR 0x600c0000
eaa859e7	491
c8a7d9da WH	492	/*
	493	* Environment
	494	*/
	495	#define CONFIG_ENV_OVERWRITE
	496
8415bb68 AW	497	#if defined(CONFIG_SD_BOOT)
	498	#define CONFIG_ENV_OFFSET 0x100000
	499	#define CONFIG_ENV_IS_IN_MMC
	500	#define CONFIG_SYS_MMC_ENV_DEV 0
	501	#define CONFIG_ENV_SIZE 0x20000
d612f0ab AW	502	#elif defined(CONFIG_QSPI_BOOT)
	503	#define CONFIG_ENV_IS_IN_SPI_FLASH
	504	#define CONFIG_ENV_SIZE 0x2000
	505	#define CONFIG_ENV_OFFSET 0x100000
	506	#define CONFIG_ENV_SECT_SIZE 0x10000
8415bb68	507	#else
c8a7d9da WH	508	#define CONFIG_ENV_IS_IN_FLASH
	509	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
	510	#define CONFIG_ENV_SIZE 0x20000
	511	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
8415bb68	512	#endif
c8a7d9da	513
4ba4a095 RG	514	#define CONFIG_MISC_INIT_R
	515
	516	/* Hash command with SHA acceleration supported in hardware */
ef6c55a2	517	#ifdef CONFIG_FSL_CAAM
4ba4a095 RG	518	#define CONFIG_CMD_HASH
4ba4a095 RG	519	#define CONFIG_SHA_HW_ACCEL
ef6c55a2 AB	520	#endif
	521
	522	#include <asm/fsl_secure_boot.h>
cc7b8b9a	523	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
4ba4a095	524
c8a7d9da	525	#endif