[people/ms/u-boot.git] / include / configs / mx31pdk.h

/*
 * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
 *
 * (C) Copyright 2004
 * Texas Instruments.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Kshitij Gupta <kshitij@ti.com>
 *
 * Configuration settings for the Freescale i.MX31 PDK board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/mx31-regs.h>

/* High Level Configuration Options */
#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
#define CONFIG_MX31		1	/* in a mx31 */
#define CONFIG_MX31_HCLK_FREQ	26000000
#define CONFIG_MX31_CLK32	32768

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1

#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SKIP_RELOCATE_UBOOT
#endif

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
/* Bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_SIZE	128

/*
 * Hardware drivers
 */

#define CONFIG_MXC_UART		1
#define CONFIG_SYS_MX31_UART1	1

#define CONFIG_HARD_SPI		1
#define CONFIG_MXC_SPI		1
#define CONFIG_DEFAULT_SPI_BUS	1
#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)

#define CONFIG_RTC_MC13783	1

/* MC13783 connected to CSPI2 and SS2 */
#define CONFIG_MC13783_SPI_BUS	1
#define CONFIG_MC13783_SPI_CS	2

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}

/***********************************************************
 * Command definition
 ***********************************************************/

#include <config_cmd_default.h>

#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_SPI
#define CONFIG_CMD_DATE
#define CONFIG_CMD_NAND

/*
 * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require
 * that CFG_NO_FLASH is undefined).
 */
#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY	3

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"bootargs_base=setenv bootargs console=ttymxc0,115200\0"	\
	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
	"bootcmd=run bootcmd_net\0"					\
	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
		"tftpboot 0x81000000 uImage-mx31; bootm\0"		\
	"prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; "		\
		"nand erase 0x0 0x40000; "				\
		"nand write 0x81000000 0x0 0x40000\0"

#define CONFIG_NET_MULTI
#define CONFIG_SMC911X		1
#define CONFIG_SMC911X_BASE	0xB6000000
#define CONFIG_SMC911X_32_BIT	1

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP	/* undef to save memory */
#define CONFIG_SYS_PROMPT	"uboot> "
#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
				sizeof(CONFIG_SYS_PROMPT)+16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS	16
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE

/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x10000

/* default load address */
#define CONFIG_SYS_LOAD_ADDR		0x81000000

#define CONFIG_SYS_HZ			1000

#define CONFIG_CMDLINE_EDITING	1

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM_1		CSD0_BASE
#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
/* No NOR flash present */
#define CONFIG_SYS_NO_FLASH	1

#define CONFIG_ENV_IS_IN_NAND		1
#define CONFIG_ENV_OFFSET		0x40000
#define CONFIG_ENV_OFFSET_REDUND	0x60000
#define CONFIG_ENV_SIZE			(128 * 1024)

/*
 * NAND driver
 */
#define CONFIG_NAND_MXC
#define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
#define CONFIG_SYS_MAX_NAND_DEVICE     1
#define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE

/* NAND configuration for the NAND_SPL */

/* Start copying real U-boot from the second page */
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x30000
/* Load U-Boot to this address */
#define CONFIG_SYS_NAND_U_BOOT_DST	0x87f00000
#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST

#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0


/* Configuration of lowlevel_init.S (clocks and SDRAM) */
#define CCM_CCMR_SETUP		0x074B0BF5
#define CCM_PDR0_SETUP_532MHZ	(PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
				 PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) |     \
				 PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) |     \
				 PDR0_MCU_PODF(0))
#define CCM_MPCTL_SETUP_532MHZ	(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) |   \
				 PLL_MFN(12))

#define ESDMISC_MDDR_SETUP	0x00000004
#define ESDMISC_MDDR_RESET_DL	0x0000000c
#define ESDCFG0_MDDR_SETUP	0x006ac73a

#define ESDCTL_ROW_COL		(ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
#define ESDCTL_SETTINGS		(ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
				 ESDCTL_DSIZ(2) | ESDCTL_BL(1))
#define ESDCTL_PRECHARGE	(ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
#define ESDCTL_AUTOREFRESH	(ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
#define ESDCTL_LOADMODEREG	(ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
#define ESDCTL_RW		ESDCTL_SETTINGS

#endif /* __CONFIG_H */
Commit	Line	Data
8449f287 ML	1	/*
	2	* (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
	3	*
	4	* (C) Copyright 2004
	5	* Texas Instruments.
	6	* Richard Woodruff <r-woodruff2@ti.com>
	7	* Kshitij Gupta <kshitij@ti.com>
	8	*
	9	* Configuration settings for the Freescale i.MX31 PDK board.
	10	*
	11	* See file CREDITS for list of people who contributed to this
	12	* project.
	13	*
	14	* This program is free software; you can redistribute it and/or
	15	* modify it under the terms of the GNU General Public License as
	16	* published by the Free Software Foundation; either version 2 of
	17	* the License, or (at your option) any later version.
	18	*
	19	* This program is distributed in the hope that it will be useful,
	20	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	21	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	22	* GNU General Public License for more details.
	23	*
	24	* You should have received a copy of the GNU General Public License
	25	* along with this program; if not, write to the Free Software
	26	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	27	* MA 02111-1307 USA
	28	*/
	29
	30	#ifndef __CONFIG_H
	31	#define __CONFIG_H
	32
38a8b3ea ML	33	#include <asm/arch/mx31-regs.h>
38a8b3ea ML	34
8449f287 ML	35	/* High Level Configuration Options */
	36	#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
	37	#define CONFIG_MX31 1 /* in a mx31 */
	38	#define CONFIG_MX31_HCLK_FREQ 26000000
	39	#define CONFIG_MX31_CLK32 32768
	40
	41	#define CONFIG_DISPLAY_CPUINFO
	42	#define CONFIG_DISPLAY_BOARDINFO
	43
	44	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	45	#define CONFIG_SETUP_MEMORY_TAGS 1
	46	#define CONFIG_INITRD_TAG 1
	47
d08e5ca3	48	#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
8449f287	49	#define CONFIG_SKIP_LOWLEVEL_INIT
d08e5ca3 ML	50	#define CONFIG_SKIP_RELOCATE_UBOOT
d08e5ca3 ML	51	#endif
8449f287 ML	52
	53	/*
	54	* Size of malloc() pool
	55	*/
38a8b3ea	56	#define CONFIG_SYS_MALLOC_LEN (2CONFIG_ENV_SIZE + 2 128 * 1024)
8449f287 ML	57	/* Bytes reserved for initial data */
	58	#define CONFIG_SYS_GBL_DATA_SIZE 128
	59
	60	/*
	61	* Hardware drivers
	62	*/
	63
	64	#define CONFIG_MXC_UART 1
	65	#define CONFIG_SYS_MX31_UART1 1
	66
	67	#define CONFIG_HARD_SPI 1
	68	#define CONFIG_MXC_SPI 1
	69	#define CONFIG_DEFAULT_SPI_BUS 1
	70	#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 \| SPI_CS_HIGH)
	71
	72	#define CONFIG_RTC_MC13783 1
	73
	74	/* MC13783 connected to CSPI2 and SS2 */
	75	#define CONFIG_MC13783_SPI_BUS 1
	76	#define CONFIG_MC13783_SPI_CS 2
	77
	78	/* allow to overwrite serial and ethaddr */
	79	#define CONFIG_ENV_OVERWRITE
	80	#define CONFIG_CONS_INDEX 1
	81	#define CONFIG_BAUDRATE 115200
	82	#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
	83
	84	/***********************************************************
	85	* Command definition
	86	***********************************************************/
	87
	88	#include <config_cmd_default.h>
	89
	90	#define CONFIG_CMD_MII
	91	#define CONFIG_CMD_PING
	92	#define CONFIG_CMD_SPI
	93	#define CONFIG_CMD_DATE
38a8b3ea	94	#define CONFIG_CMD_NAND
8449f287 ML	95
	96	/*
	97	* Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require
	98	* that CFG_NO_FLASH is undefined).
	99	*/
	100	#undef CONFIG_CMD_IMLS
	101
	102	#define CONFIG_BOOTDELAY 3
	103
	104	#define CONFIG_EXTRA_ENV_SETTINGS \
	105	"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
	106	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
	107	"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
	108	"bootcmd=run bootcmd_net\0" \
	109	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
38a8b3ea ML	110	"tftpboot 0x81000000 uImage-mx31; bootm\0" \
	111	"prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; " \
	112	"nand erase 0x0 0x40000; " \
	113	"nand write 0x81000000 0x0 0x40000\0"
8449f287	114
736fead8 BW	115	#define CONFIG_NET_MULTI
	116	#define CONFIG_SMC911X 1
	117	#define CONFIG_SMC911X_BASE 0xB6000000
	118	#define CONFIG_SMC911X_32_BIT 1
8449f287 ML	119
	120	/*
	121	* Miscellaneous configurable options
	122	*/
	123	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	124	#define CONFIG_SYS_PROMPT "uboot> "
	125	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	126	/* Print Buffer Size */
	127	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	128	sizeof(CONFIG_SYS_PROMPT)+16)
	129	/* max number of command args */
	130	#define CONFIG_SYS_MAXARGS 16
	131	/* Boot Argument Buffer Size */
	132	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	133
	134	/* memtest works on */
	135	#define CONFIG_SYS_MEMTEST_START 0x80000000
	136	#define CONFIG_SYS_MEMTEST_END 0x10000
	137
	138	/* default load address */
	139	#define CONFIG_SYS_LOAD_ADDR 0x81000000
	140
	141	#define CONFIG_SYS_HZ 1000
	142
	143	#define CONFIG_CMDLINE_EDITING 1
	144
	145	/*-----------------------------------------------------------------------
	146	* Stack sizes
	147	*
	148	* The stack sizes are set up in start.S using the settings below
	149	*/
	150	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	151
	152	/*-----------------------------------------------------------------------
	153	* Physical Memory Map
	154	*/
	155	#define CONFIG_NR_DRAM_BANKS 1
	156	#define PHYS_SDRAM_1 CSD0_BASE
	157	#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
	158
	159	/*-----------------------------------------------------------------------
	160	* FLASH and environment organization
	161	*/
	162	/* No NOR flash present */
	163	#define CONFIG_SYS_NO_FLASH 1
	164
38a8b3ea ML	165	#define CONFIG_ENV_IS_IN_NAND 1
	166	#define CONFIG_ENV_OFFSET 0x40000
	167	#define CONFIG_ENV_OFFSET_REDUND 0x60000
	168	#define CONFIG_ENV_SIZE (128 * 1024)
8449f287	169
38a8b3ea ML	170	/*
	171	* NAND driver
	172	*/
	173	#define CONFIG_NAND_MXC
	174	#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR
	175	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	176	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	177	#define CONFIG_MXC_NAND_HWECC
	178	#define CONFIG_SYS_NAND_LARGEPAGE
8449f287	179
d08e5ca3 ML	180	/* NAND configuration for the NAND_SPL */
	181
	182	/* Start copying real U-boot from the second page */
	183	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800
	184	#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000
	185	/* Load U-Boot to this address */
	186	#define CONFIG_SYS_NAND_U_BOOT_DST 0x87f00000
	187	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
	188
	189	#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
	190	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	191	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	192	#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
	193	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
	194
	195
	196	/* Configuration of lowlevel_init.S (clocks and SDRAM) */
	197	#define CCM_CCMR_SETUP 0x074B0BF5
	198	#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x1ff) \| PDR0_PER_PODF(7) \| \
	199	PDR0_HSP_PODF(3) \| PDR0_NFC_PODF(5) \| \
	200	PDR0_IPG_PODF(1) \| PDR0_MAX_PODF(3) \| \
	201	PDR0_MCU_PODF(0))
	202	#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) \| PLL_MFD(51) \| PLL_MFI(10) \| \
	203	PLL_MFN(12))
	204
	205	#define ESDMISC_MDDR_SETUP 0x00000004
	206	#define ESDMISC_MDDR_RESET_DL 0x0000000c
	207	#define ESDCFG0_MDDR_SETUP 0x006ac73a
	208
	209	#define ESDCTL_ROW_COL (ESDCTL_SDE \| ESDCTL_ROW(2) \| ESDCTL_COL(2))
	210	#define ESDCTL_SETTINGS (ESDCTL_ROW_COL \| ESDCTL_SREFR(3) \| \
	211	ESDCTL_DSIZ(2) \| ESDCTL_BL(1))
	212	#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL \| ESDCTL_CMD_PRECHARGE)
	213	#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL \| ESDCTL_CMD_AUTOREFRESH)
	214	#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL \| ESDCTL_CMD_LOADMODEREG)
	215	#define ESDCTL_RW ESDCTL_SETTINGS
	216
8449f287	217	#endif /* __CONFIG_H */