[people/ms/u-boot.git] / include / configs / omap3_pandora.h

/*
 * (C) Copyright 2008-2010
 * Gražvydas Ignotas <notasas@gmail.com>
 *
 * Configuration settings for the OMAP3 Pandora.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define CONFIG_NAND

/* override base for compatibility with MLO the device ships with */
#define CONFIG_SYS_TEXT_BASE		0x80008000

#include <configs/ti_omap3_common.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO		1
#define CONFIG_DISPLAY_BOARDINFO	1

#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG		1

#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */

#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
#define CONFIG_SYS_DEVICE_NULLDEV	1

/*
 * Hardware drivers
 */

/* I2C Support */
#define CONFIG_SYS_I2C_OMAP34XX

/* TWL4030 LED */
#define CONFIG_TWL4030_LED

/* Initialize GPIOs by default */
#define CONFIG_OMAP3_GPIO_4	/* GPIO96..127 is in GPIO Bank 4 */
#define CONFIG_OMAP3_GPIO_6	/* GPIO160..191 is in GPIO Bank 6 */

/*
 * NS16550 Configuration
 */
#undef CONFIG_SYS_NS16550_CLK
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3

/* commands to include */

/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64

#ifdef CONFIG_NAND
#define CONFIG_CMD_UBI		/* UBI-formated MTD partition support */
#define CONFIG_CMD_UBIFS	/* Read-only UBI volume operations */

#define CONFIG_RBTREE		/* required by CONFIG_CMD_UBI */
#define CONFIG_LZO		/* required by CONFIG_CMD_UBIFS */

#define CONFIG_MTD_PARTITIONS	/* required for UBI partition support */

#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(xloader),"\
					"1920k(uboot),128k(uboot-env),"\
					"10m(boot),-(rootfs)"
#else
#define MTDPARTS_DEFAULT
#endif

#define CONFIG_EXTRA_ENV_SETTINGS \
	DEFAULT_LINUX_BOOT_ENV \
	"usbtty=cdc_acm\0" \
	"bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
		"rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \

#define CONFIG_BOOTCOMMAND \
	"if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
			"ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
		"source ${loadaddr}; " \
	"fi; " \
	"ubi part boot && ubifsmount ubi:boot && " \
		"ubifsload ${loadaddr} uImage && bootm ${loadaddr}"

/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

#if defined(CONFIG_NAND)
#define CONFIG_SYS_FLASH_BASE		NAND_BASE
#endif

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE

#define CONFIG_ENV_IS_IN_NAND		1
#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

#define CONFIG_SYS_CACHELINE_SIZE	64

#endif				/* __CONFIG_H */
Commit	Line	Data
2be2c6cc	1	/*
73225245 GI	2	* (C) Copyright 2008-2010
73225245 GI	3	* Gražvydas Ignotas <notasas@gmail.com>
2be2c6cc DB	4	*
	5	* Configuration settings for the OMAP3 Pandora.
	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
2be2c6cc DB	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
2be2c6cc	12
76375454 GI	13	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
76375454 GI	14	#define CONFIG_NAND
2be2c6cc	15
76375454 GI	16	/* override base for compatibility with MLO the device ships with */
76375454 GI	17	#define CONFIG_SYS_TEXT_BASE 0x80008000
cae377b5	18
76375454	19	#include <configs/ti_omap3_common.h>
2be2c6cc	20
6a6b62e3 SP	21	/*
	22	* Display CPU and Board information
	23	*/
	24	#define CONFIG_DISPLAY_CPUINFO 1
	25	#define CONFIG_DISPLAY_BOARDINFO 1
	26
2be2c6cc	27	#define CONFIG_MISC_INIT_R
2be2c6cc DB	28	#define CONFIG_REVISION_TAG 1
2be2c6cc DB	29
9c44ddcc	30	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
76375454 GI	31
	32	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	33	#define CONFIG_SYS_DEVICE_NULLDEV 1
2be2c6cc DB	34
	35	/*
	36	* Hardware drivers
	37	*/
	38
76375454 GI	39	/* I2C Support */
76375454 GI	40	#define CONFIG_SYS_I2C_OMAP34XX
73225245	41
76375454 GI	42	/* TWL4030 LED */
76375454 GI	43	#define CONFIG_TWL4030_LED
73225245	44
76375454 GI	45	/* Initialize GPIOs by default */
	46	#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */
	47	#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */
73225245	48
2be2c6cc DB	49	/*
	50	* NS16550 Configuration
	51	*/
c7b9686d	52	#undef CONFIG_SYS_NS16550_CLK
2be2c6cc DB	53	#define CONFIG_SYS_NS16550_SERIAL
	54	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	55	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
2be2c6cc DB	56	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	57	#define CONFIG_SERIAL3 3
	58
2be2c6cc	59	/* commands to include */
2be2c6cc	60
2be2c6cc DB	61	/*
	62	* Board NAND Info.
	63	*/
2be2c6cc DB	64	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
2be2c6cc DB	65	/* to access nand */
55f1b39f	66	#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
76375454 GI	67	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
	68	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	69	#define CONFIG_SYS_NAND_OOBSIZE 64
	70
	71	#ifdef CONFIG_NAND
	72	#define CONFIG_CMD_UBI /* UBI-formated MTD partition support */
	73	#define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */
	74
	75	#define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */
	76	#define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */
	77
	78	#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
	79
	80	#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
	81	#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader),"\
73225245 GI	82	"1920k(uboot),128k(uboot-env),"\
	83	"10m(boot),-(rootfs)"
	84	#else
	85	#define MTDPARTS_DEFAULT
	86	#endif
2be2c6cc	87
2be2c6cc	88	#define CONFIG_EXTRA_ENV_SETTINGS \
76375454	89	DEFAULT_LINUX_BOOT_ENV \
73225245	90	"usbtty=cdc_acm\0" \
73225245	91	"bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
9baa37b1	92	"rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
73225245	93	"mtdparts=" MTDPARTS_DEFAULT "\0" \
2be2c6cc DB	94
2be2c6cc DB	95	#define CONFIG_BOOTCOMMAND \
86c5c544	96	"if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr \|\| " \
73225245 GI	97	"ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
	98	"source ${loadaddr}; " \
	99	"fi; " \
949a7710 JH	100	"ubi part boot && ubifsmount ubi:boot && " \
949a7710 JH	101	"ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
2be2c6cc	102
2be2c6cc DB	103	/* memtest works on */
	104	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	105	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	106	0x01F00000) /* 31MB */
	107
76375454	108	#if defined(CONFIG_NAND)
222a3113	109	#define CONFIG_SYS_FLASH_BASE NAND_BASE
6cbec7b3	110	#endif
2be2c6cc DB	111
	112	/* Monitor at start of flash */
	113	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
2be2c6cc DB	114
2be2c6cc DB	115	#define CONFIG_ENV_IS_IN_NAND 1
73225245	116	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
2be2c6cc	117
6cbec7b3 LC	118	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
6cbec7b3 LC	119	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
2be2c6cc DB	120	#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
2be2c6cc DB	121
8e40852f A	122	#define CONFIG_SYS_CACHELINE_SIZE 64
8e40852f A	123
2be2c6cc	124	#endif /* __CONFIG_H */