]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/omap5_uevm.h
Merge git://www.denx.de/git/u-boot-marvell
[people/ms/u-boot.git] / include / configs / omap5_uevm.h
CommitLineData
a9c1c042 1/*
3ef5ebeb 2 * (C) Copyright 2013
a9c1c042
S
3 * Texas Instruments Incorporated.
4 * Sricharan R <r.sricharan@ti.com>
5 *
a9c1c042 6 * Configuration settings for the TI EVM5430 board.
3d657a05 7 * See ti_omap5_common.h for omap5 common settings.
a9c1c042 8 *
3765b3e7 9 * SPDX-License-Identifier: GPL-2.0+
a9c1c042
S
10 */
11
3ef5ebeb
LV
12#ifndef __CONFIG_OMAP5_EVM_H
13#define __CONFIG_OMAP5_EVM_H
a9c1c042 14
f843770a
SN
15#include <environment/ti/dfu.h>
16
08520bf5 17#ifndef CONFIG_SPL_BUILD
9552ee3e
TR
18/* Define the default GPT table for eMMC */
19#define PARTS_DEFAULT \
20 "uuid_disk=${uuid_gpt_disk};" \
a519602d 21 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
08520bf5 22#endif
9552ee3e 23
bcd62e72
KVA
24#define DFUARGS \
25 "dfu_bufsiz=0x10000\0" \
26 DFU_ALT_INFO_MMC \
27 DFU_ALT_INFO_EMMC \
28 DFU_ALT_INFO_RAM
29
3d657a05 30#include <configs/ti_omap5_common.h>
a228296c 31
378bd1fb
S
32#define CONFIG_CONS_INDEX 3
33#define CONFIG_SYS_NS16550_COM3 UART3_BASE
34#define CONFIG_BAUDRATE 115200
35
ba2e01c7 36#define CONFIG_MISC_INIT_R
9552ee3e
TR
37/* MMC ENV related defines */
38#define CONFIG_ENV_IS_IN_MMC
39#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
2737f011 40#define CONFIG_ENV_SIZE (128 << 10)
9552ee3e 41#define CONFIG_ENV_OFFSET 0xE0000
63216de1
TR
42#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
43#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
9552ee3e
TR
44
45/* Enhance our eMMC support / experience. */
46#define CONFIG_CMD_GPT
47#define CONFIG_EFI_PARTITION
f931483e 48#define CONFIG_HSMMC2_8BIT
378ec0f8 49#define CONFIG_SUPPORT_EMMC_BOOT
9552ee3e 50
318aeb46 51/* Required support for the TCA642X GPIO we have on the uEVM */
fdce7b63
DM
52#define CONFIG_TCA642X
53#define CONFIG_CMD_TCA642X
54#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
55#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
56
5e5cfaf9 57/* USB UHH support options */
5e5cfaf9
DM
58#define CONFIG_USB_EHCI
59#define CONFIG_USB_EHCI_OMAP
5e5cfaf9
DM
60#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
61#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
62
63#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
64#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
65
66/* Enabled commands */
5e5cfaf9
DM
67
68/* USB Networking options */
69#define CONFIG_USB_HOST_ETHER
70#define CONFIG_USB_ETHER_SMSC95XX
71
45dbbf29 72#define CONSOLEDEV "ttyO2"
318aeb46
TR
73
74/* Max time to hold reset on this board, see doc/README.omap-reset-time */
0b1b60c7 75#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
a8017574 76
c649e3c9 77#define CONFIG_SCSI
afdc6321
RQ
78#define CONFIG_LIBATA
79#define CONFIG_SCSI_AHCI
80#define CONFIG_SCSI_AHCI_PLAT
81#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
82#define CONFIG_SYS_SCSI_MAX_LUN 1
83#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
84 CONFIG_SYS_SCSI_MAX_LUN)
85
3ef5ebeb 86#endif /* __CONFIG_OMAP5_EVM_H */