[people/ms/u-boot.git] / include / configs / pxa255_idp.h

/*
 * (C) Copyright 2002
 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
 *
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * Copied from lubbock.h
 *
 * (C) Copyright 2004
 * BEC Systems <http://bec-systems.com>
 * Cliff Brake <cliff.brake@gmail.com>
 * Configuation settings for the Accelent/Vibren PXA255 IDP
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/pxa-regs.h>

/*
 * If we are developing, we might want to start U-Boot from RAM
 * so we MUST NOT initialize critical regs like mem-timing ...
 */
#undef CONFIG_SKIP_LOWLEVEL_INIT			/* define for developing */
#define	CONFIG_SYS_TEXT_BASE	0x0

/*
 * define the following to enable debug blinks.  A debug blink function
 * must be defined in memsetup.S
 */
#undef DEBUG_BLINK_ENABLE
#undef DEBUG_BLINKC_ENABLE

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_CPU_PXA25X		1	/* This is an PXA250 CPU    */

#undef CONFIG_LCD
#ifdef CONFIG_LCD
#define CONFIG_PXA_LCD
#define CONFIG_SHARP_LM8V31
#endif

#define CONFIG_MMC		1
#define CONFIG_DOS_PARTITION	1
#define CONFIG_BOARD_LATE_INIT

/* we will never enable dcache, because we have to setup MMU first */
#define CONFIG_SYS_DCACHE_OFF

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)

/*
 * PXA250 IDP memory map information
 */

#define IDP_CS5_ETH_OFFSET	0x03400000


/*
 * Hardware drivers
 */
#define CONFIG_SMC91111
#define CONFIG_SMC91111_BASE	(PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
#define CONFIG_SMC_USE_32_BIT	1
/* #define CONFIG_SMC_USE_IOFUNCS */

/* the following has to be set high -- suspect something is wrong with
 * with the tftp timeout routines. FIXME!!!
 */
#define CONFIG_NET_RETRY_COUNT	100

/*
 * select serial console configuration
 */
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART	       1       /* we use FFUART on LUBBOCK */
#define CONFIG_CONS_INDEX	3

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_BAUDRATE		115200


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_FAT
#define CONFIG_CMD_DHCP

#define CONFIG_BOOTDELAY	3
#define CONFIG_BOOTCOMMAND	"bootm 40000"
#define CONFIG_BOOTARGS		"root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
/* #define CONFIG_INITRD_TAG		1 */

/*
 * Current memory map for Vibren supplied Linux images:
 *
 * Flash:
 * 0 - 0x3ffff (size = 0x40000): bootloader
 * 0x40000 - 0x13ffff (size = 0x100000): kernel
 * 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs
 *
 * RAM:
 * 0xa0008000 - kernel is loaded
 * 0xa3000000 - Uboot runs (48MB into RAM)
 *
 */

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"prog_boot_mmc="						\
			"mw.b 0xa0000000 0xff 0x40000; "		\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa0000000 u-boot.bin; "	\
			"then "						\
				"protect off 0x0 0x3ffff; "		\
				"erase 0x0 0x3ffff; "			\
				"cp.b 0xa0000000 0x0 0x40000; "		\
				"reset;"				\
			"fi\0"						\
	"prog_uzImage_mmc="						\
			"mw.b 0xa0000000 0xff 0x100000; "		\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa0000000 uzImage; "	\
			"then "						\
				"protect off 0x40000 0xfffff; "		\
				"erase 0x40000 0xfffff; "		\
				"cp.b 0xa0000000 0x40000 0x100000; "	\
			"fi\0"						\
	"prog_jffs_mmc="						\
			"mw.b 0xa0000000 0xff 0x1e00000; "		\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa0000000 root.jffs; "	\
			"then "						\
				"protect off 0x140000 0x1f3ffff; "	\
				"erase 0x140000 0x1f3ffff; "		\
				"cp.b 0xa0000000 0x140000 0x1e00000; "	\
			"fi\0"						\
	"boot_mmc="							\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa1000000 uzImage && "	\
			"then "						\
				"bootm 0xa1000000; "			\
			"fi\0"						\
	"prog_boot_net="						\
			"mw.b 0xa0000000 0xff 0x100000; "		\
			"if	 bootp 0xa0000000 u-boot.bin; "		\
			"then "						\
				"protect off 0x0 0x3ffff; "		\
				"erase 0x0 0x3ffff; "			\
				"cp.b 0xa0000000 0x0 0x40000; "		\
				"reset; "				\
			"fi\0"						\
	"prog_uzImage_net="						\
			"mw.b 0xa0000000 0xff 0x100000; "		\
			"if	 bootp 0xa0000000 uzImage; "		\
			"then "						\
				"protect off 0x40000 0xfffff; "		\
				"erase 0x40000 0xfffff; "		\
				"cp.b 0xa0000000 0x40000 0x100000; "	\
			"fi\0"						\
	"prog_jffs_net="						\
			"mw.b 0xa0000000 0xff 0x1e00000; "		\
			"if	 bootp 0xa0000000 root.jffs; "		\
			"then "						\
				"protect off 0x140000 0x1f3ffff; "	\
				"erase 0x140000 0x1f3ffff; "		\
				"cp.b 0xa0000000 0x140000 0x1e00000; "	\
			"fi\0"


/*	"erase_env="			*/
/*			"protect off"	*/


#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_HUSH_PARSER		1

#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
#else
#endif
#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
#define CONFIG_SYS_DEVICE_NULLDEV	1

#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0xa0800000	/* default load address */

#define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */

#define RTC	1				/* enable 32KHz osc */

#ifdef CONFIG_MMC
#define	CONFIG_GENERIC_MMC
#define	CONFIG_PXA_MMC_GENERIC
#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE		0xF0000000
#endif

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */

#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
#define PHYS_FLASH_SIZE		0x02000000 /* 32 MB */
#define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
#define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */

#define CONFIG_SYS_DRAM_BASE		0xa0000000
#define CONFIG_SYS_DRAM_SIZE		0x04000000

#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define	CONFIG_SYS_INIT_SP_ADDR		0xfffff800

/*
 * GPIO settings
 */

#define CONFIG_SYS_GAFR0_L_VAL	0x80001005
#define CONFIG_SYS_GAFR0_U_VAL	0xa5128012
#define CONFIG_SYS_GAFR1_L_VAL	0x699a9558
#define CONFIG_SYS_GAFR1_U_VAL	0xaaa5aa6a
#define CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL	0x2
#define CONFIG_SYS_GPCR0_VAL	0x1800400
#define CONFIG_SYS_GPCR1_VAL	0x0
#define CONFIG_SYS_GPCR2_VAL	0x0
#define CONFIG_SYS_GPDR0_VAL	0xc1818440
#define CONFIG_SYS_GPDR1_VAL	0xfcffab82
#define CONFIG_SYS_GPDR2_VAL	0x1ffff
#define CONFIG_SYS_GPSR0_VAL	0x8000
#define CONFIG_SYS_GPSR1_VAL	0x3f0002
#define CONFIG_SYS_GPSR2_VAL	0x1c000

#define CONFIG_SYS_PSSR_VAL		0x20

#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
#define	CONFIG_SYS_CKEN			0x0

/*
 * Memory settings
 */
#define CONFIG_SYS_MSC0_VAL		0x29DCA4D2
#define CONFIG_SYS_MSC1_VAL		0x43AC494C
#define CONFIG_SYS_MSC2_VAL		0x39D449D4
#define CONFIG_SYS_MDCNFG_VAL		0x090009C9
#define CONFIG_SYS_MDREFR_VAL		0x0085C017
#define CONFIG_SYS_MDMRS_VAL		0x00220022
#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
#define	CONFIG_SYS_SXCNFG_VAL		0x00000000

/*
 * PCMCIA and CF Interfaces
 */
#define CONFIG_SYS_MECR_VAL		0x00000003
#define CONFIG_SYS_MCMEM0_VAL		0x00014405
#define CONFIG_SYS_MCMEM1_VAL		0x00014405
#define CONFIG_SYS_MCATT0_VAL		0x00014405
#define CONFIG_SYS_MCATT1_VAL		0x00014405
#define CONFIG_SYS_MCIO0_VAL		0x00014405
#define CONFIG_SYS_MCIO1_VAL		0x00014405

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER	1

#define CONFIG_SYS_MONITOR_BASE	0
#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1

/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */

/* put cfg at end of flash for now */
#define CONFIG_ENV_IS_IN_FLASH	1
 /* Addr of Environment Sector	*/
#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
#define CONFIG_ENV_SIZE		PHYS_FLASH_SECT_SIZE	/* Total Size of Environment Sector	*/
#define	CONFIG_ENV_SECT_SIZE	(PHYS_FLASH_SECT_SIZE / 16)

#endif	/* __CONFIG_H */
Commit	Line	Data
70a2047f WD	1	/*
	2	* (C) Copyright 2002
	3	* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
	4	*
	5	* (C) Copyright 2002
	6	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	7	* Marius Groeger <mgroeger@sysgo.de>
	8	*
	9	* Copied from lubbock.h
	10	*
	11	* (C) Copyright 2004
	12	* BEC Systems <http://bec-systems.com>
	13	* Cliff Brake <cliff.brake@gmail.com>
	14	* Configuation settings for the Accelent/Vibren PXA255 IDP
	15	*
3765b3e7	16	* SPDX-License-Identifier: GPL-2.0+
70a2047f WD	17	*/
	18
	19	#ifndef __CONFIG_H
	20	#define __CONFIG_H
	21
	22	#include <asm/arch/pxa-regs.h>
	23
	24	/*
2a4741d9	25	* If we are developing, we might want to start U-Boot from RAM
70a2047f WD	26	* so we MUST NOT initialize critical regs like mem-timing ...
70a2047f WD	27	*/
2a4741d9	28	#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */
65bd6a90	29	#define CONFIG_SYS_TEXT_BASE 0x0
70a2047f WD	30
	31	/*
	32	* define the following to enable debug blinks. A debug blink function
	33	* must be defined in memsetup.S
	34	*/
	35	#undef DEBUG_BLINK_ENABLE
	36	#undef DEBUG_BLINKC_ENABLE
	37
	38	/*
	39	* High Level Configuration Options
	40	* (easy to change)
	41	*/
abc20aba	42	#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */
70a2047f WD	43
	44	#undef CONFIG_LCD
	45	#ifdef CONFIG_LCD
0698095a	46	#define CONFIG_PXA_LCD
70a2047f WD	47	#define CONFIG_SHARP_LM8V31
	48	#endif
	49
	50	#define CONFIG_MMC 1
2a4741d9	51	#define CONFIG_DOS_PARTITION 1
9660e442	52	#define CONFIG_BOARD_LATE_INIT
70a2047f	53
b3acb6cd	54	/* we will never enable dcache, because we have to setup MMU first */
e47f2db5	55	#define CONFIG_SYS_DCACHE_OFF
b3acb6cd	56
70a2047f WD	57	/*
	58	* Size of malloc() pool
	59	*/
6d0f6bcf	60	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
70a2047f WD	61
	62	/*
	63	* PXA250 IDP memory map information
	64	*/
	65
	66	#define IDP_CS5_ETH_OFFSET 0x03400000
	67
	68
	69	/*
	70	* Hardware drivers
	71	*/
7194ab80	72	#define CONFIG_SMC91111
70a2047f WD	73	#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
	74	#define CONFIG_SMC_USE_32_BIT 1
	75	/* #define CONFIG_SMC_USE_IOFUNCS */
	76
	77	/* the following has to be set high -- suspect something is wrong with
	78	* with the tftp timeout routines. FIXME!!!
	79	*/
	80	#define CONFIG_NET_RETRY_COUNT 100
	81
	82	/*
	83	* select serial console configuration
	84	*/
379be585	85	#define CONFIG_PXA_SERIAL
70a2047f	86	#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
ce6971cd	87	#define CONFIG_CONS_INDEX 3
70a2047f WD	88
	89	/* allow to overwrite serial and ethaddr */
	90	#define CONFIG_ENV_OVERWRITE
	91
	92	#define CONFIG_BAUDRATE 115200
	93
70a2047f	94
079a136c JL	95	/*
	96	* BOOTP options
	97	*/
	98	#define CONFIG_BOOTP_BOOTFILESIZE
	99	#define CONFIG_BOOTP_BOOTPATH
	100	#define CONFIG_BOOTP_GATEWAY
	101	#define CONFIG_BOOTP_HOSTNAME
	102
	103
26a34560 JL	104	/*
	105	* Command line configuration.
	106	*/
	107	#include <config_cmd_default.h>
	108
26a34560 JL	109	#define CONFIG_CMD_FAT
	110	#define CONFIG_CMD_DHCP
	111
70a2047f WD	112	#define CONFIG_BOOTDELAY 3
	113	#define CONFIG_BOOTCOMMAND "bootm 40000"
	114	#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
25dbe98a WD	115
	116	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	117	#define CONFIG_SETUP_MEMORY_TAGS 1
	118	/* #define CONFIG_INITRD_TAG 1 */
70a2047f WD	119
	120	/*
	121	* Current memory map for Vibren supplied Linux images:
	122	*
	123	* Flash:
	124	* 0 - 0x3ffff (size = 0x40000): bootloader
	125	* 0x40000 - 0x13ffff (size = 0x100000): kernel
	126	* 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs
	127	*
	128	* RAM:
	129	* 0xa0008000 - kernel is loaded
	130	* 0xa3000000 - Uboot runs (48MB into RAM)
	131	*
	132	*/
	133
	134	#define CONFIG_EXTRA_ENV_SETTINGS \
	135	"prog_boot_mmc=" \
	136	"mw.b 0xa0000000 0xff 0x40000; " \
	137	"if mmcinit && " \
	138	"fatload mmc 0 0xa0000000 u-boot.bin; " \
	139	"then " \
	140	"protect off 0x0 0x3ffff; " \
	141	"erase 0x0 0x3ffff; " \
	142	"cp.b 0xa0000000 0x0 0x40000; " \
	143	"reset;" \
	144	"fi\0" \
	145	"prog_uzImage_mmc=" \
	146	"mw.b 0xa0000000 0xff 0x100000; " \
	147	"if mmcinit && " \
	148	"fatload mmc 0 0xa0000000 uzImage; " \
	149	"then " \
	150	"protect off 0x40000 0xfffff; " \
	151	"erase 0x40000 0xfffff; " \
	152	"cp.b 0xa0000000 0x40000 0x100000; " \
	153	"fi\0" \
	154	"prog_jffs_mmc=" \
	155	"mw.b 0xa0000000 0xff 0x1e00000; " \
	156	"if mmcinit && " \
	157	"fatload mmc 0 0xa0000000 root.jffs; " \
	158	"then " \
	159	"protect off 0x140000 0x1f3ffff; " \
	160	"erase 0x140000 0x1f3ffff; " \
	161	"cp.b 0xa0000000 0x140000 0x1e00000; " \
	162	"fi\0" \
	163	"boot_mmc=" \
	164	"if mmcinit && " \
	165	"fatload mmc 0 0xa1000000 uzImage && " \
	166	"then " \
	167	"bootm 0xa1000000; " \
	168	"fi\0" \
	169	"prog_boot_net=" \
	170	"mw.b 0xa0000000 0xff 0x100000; " \
	171	"if bootp 0xa0000000 u-boot.bin; " \
	172	"then " \
	173	"protect off 0x0 0x3ffff; " \
	174	"erase 0x0 0x3ffff; " \
	175	"cp.b 0xa0000000 0x0 0x40000; " \
	176	"reset; " \
	177	"fi\0" \
	178	"prog_uzImage_net=" \
	179	"mw.b 0xa0000000 0xff 0x100000; " \
	180	"if bootp 0xa0000000 uzImage; " \
	181	"then " \
	182	"protect off 0x40000 0xfffff; " \
183	"erase 0x40000 0xfffff; " \
184	"cp.b 0xa0000000 0x40000 0x100000; " \
185	"fi\0" \
186	"prog_jffs_net=" \
187	"mw.b 0xa0000000 0xff 0x1e00000; " \
188	"if bootp 0xa0000000 root.jffs; " \
189	"then " \
190	"protect off 0x140000 0x1f3ffff; " \
191	"erase 0x140000 0x1f3ffff; " \
192	"cp.b 0xa0000000 0x140000 0x1e00000; " \
193	"fi\0"
194
195
196	/* "erase_env=" */
197	/* "protect off" */
198
199
26a34560	200	#if defined(CONFIG_CMD_KGDB)
70a2047f WD	201	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
	202	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	203	#endif
	204
	205	/*
	206	* Miscellaneous configurable options
	207	*/
6d0f6bcf	208	#define CONFIG_SYS_HUSH_PARSER 1
70a2047f	209
6d0f6bcf JCPV	210	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	211	#ifdef CONFIG_SYS_HUSH_PARSER
	212	#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
70a2047f	213	#else
70a2047f	214	#endif
6d0f6bcf JCPV	215	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	216	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	217	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	218	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	219	#define CONFIG_SYS_DEVICE_NULLDEV 1
70a2047f	220
6d0f6bcf JCPV	221	#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
6d0f6bcf JCPV	222	#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
70a2047f	223
6d0f6bcf	224	#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */
70a2047f	225
6d0f6bcf	226	#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
70a2047f WD	227
	228	#define RTC 1 /* enable 32KHz osc */
	229
b03d92e5	230	#ifdef CONFIG_MMC
831f849f MV	231	#define CONFIG_GENERIC_MMC
831f849f MV	232	#define CONFIG_PXA_MMC_GENERIC
b03d92e5	233	#define CONFIG_CMD_MMC
6d0f6bcf	234	#define CONFIG_SYS_MMC_BASE 0xF0000000
b03d92e5	235	#endif
70a2047f	236
70a2047f WD	237	/*
	238	* Physical Memory Map
	239	*/
65bd6a90	240	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
70a2047f WD	241	#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
	242	#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
	243	#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
	244	#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
	245	#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
	246	#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
	247	#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
	248	#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
	249
	250	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	251	#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
	252	#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
	253	#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
	254	#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
	255
6d0f6bcf JCPV	256	#define CONFIG_SYS_DRAM_BASE 0xa0000000
6d0f6bcf JCPV	257	#define CONFIG_SYS_DRAM_SIZE 0x04000000
70a2047f	258
6d0f6bcf	259	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
70a2047f	260
6ef6eb91	261	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
00d5ec93	262	#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
6ef6eb91	263
70a2047f WD	264	/*
	265	* GPIO settings
	266	*/
	267
6d0f6bcf JCPV	268	#define CONFIG_SYS_GAFR0_L_VAL 0x80001005
	269	#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012
	270	#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558
	271	#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a
	272	#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
	273	#define CONFIG_SYS_GAFR2_U_VAL 0x2
	274	#define CONFIG_SYS_GPCR0_VAL 0x1800400
	275	#define CONFIG_SYS_GPCR1_VAL 0x0
	276	#define CONFIG_SYS_GPCR2_VAL 0x0
	277	#define CONFIG_SYS_GPDR0_VAL 0xc1818440
	278	#define CONFIG_SYS_GPDR1_VAL 0xfcffab82
	279	#define CONFIG_SYS_GPDR2_VAL 0x1ffff
	280	#define CONFIG_SYS_GPSR0_VAL 0x8000
	281	#define CONFIG_SYS_GPSR1_VAL 0x3f0002
	282	#define CONFIG_SYS_GPSR2_VAL 0x1c000
	283
	284	#define CONFIG_SYS_PSSR_VAL 0x20
70a2047f	285
65bd6a90 MV	286	#define CONFIG_SYS_CCCR CCCR_L27\|CCCR_M2\|CCCR_N10
	287	#define CONFIG_SYS_CKEN 0x0
	288
70a2047f WD	289	/*
	290	* Memory settings
	291	*/
6d0f6bcf JCPV	292	#define CONFIG_SYS_MSC0_VAL 0x29DCA4D2
	293	#define CONFIG_SYS_MSC1_VAL 0x43AC494C
	294	#define CONFIG_SYS_MSC2_VAL 0x39D449D4
	295	#define CONFIG_SYS_MDCNFG_VAL 0x090009C9
	296	#define CONFIG_SYS_MDREFR_VAL 0x0085C017
	297	#define CONFIG_SYS_MDMRS_VAL 0x00220022
65bd6a90 MV	298	#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
65bd6a90 MV	299	#define CONFIG_SYS_SXCNFG_VAL 0x00000000
70a2047f WD	300
	301	/*
	302	* PCMCIA and CF Interfaces
	303	*/
6d0f6bcf JCPV	304	#define CONFIG_SYS_MECR_VAL 0x00000003
	305	#define CONFIG_SYS_MCMEM0_VAL 0x00014405
	306	#define CONFIG_SYS_MCMEM1_VAL 0x00014405
	307	#define CONFIG_SYS_MCATT0_VAL 0x00014405
	308	#define CONFIG_SYS_MCATT1_VAL 0x00014405
	309	#define CONFIG_SYS_MCIO0_VAL 0x00014405
	310	#define CONFIG_SYS_MCIO1_VAL 0x00014405
70a2047f WD	311
	312	/*
	313	* FLASH and environment organization
	314	*/
6d0f6bcf	315	#define CONFIG_SYS_FLASH_CFI
00b1883a	316	#define CONFIG_FLASH_CFI_DRIVER 1
70a2047f	317
6d0f6bcf JCPV	318	#define CONFIG_SYS_MONITOR_BASE 0
6d0f6bcf JCPV	319	#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
70a2047f	320
6d0f6bcf JCPV	321	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	322	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
70a2047f	323
6d0f6bcf	324	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
70a2047f WD	325
70a2047f WD	326	/* timeout values are in ticks */
6d0f6bcf JCPV	327	#define CONFIG_SYS_FLASH_ERASE_TOUT (25CONFIG_SYS_HZ) / Timeout for Flash Erase */
6d0f6bcf JCPV	328	#define CONFIG_SYS_FLASH_WRITE_TOUT (25CONFIG_SYS_HZ) / Timeout for Flash Write */
70a2047f WD	329
70a2047f WD	330	/* put cfg at end of flash for now */
5a1aceb0	331	#define CONFIG_ENV_IS_IN_FLASH 1
70a2047f	332	/* Addr of Environment Sector */
0e8d1586 JCPV	333	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
	334	#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
	335	#define CONFIG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16)
70a2047f WD	336
70a2047f WD	337	#endif /* __CONFIG_H */