[people/ms/u-boot.git] / include / configs / rsdproto.h

/*
 * (C) Copyright 2000
 * Murray Jensen <Murray.Jensen@cmst.csiro.au>
 *
 * (C) Copyright 2000
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * Configuation settings for the R&S Protocol Board board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU	*/
#define CONFIG_RSD_PROTO	1	/* on a R&S Protocol Board      */

/*
 * select serial console configuration
 *
 * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
 * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
 * for SCC).
 *
 * if CONFIG_CONS_NONE is defined, then the serial console routines must
 * defined elsewhere.
 */
#undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
#define	CONFIG_CONS_ON_SCC		/* define if console on SCC */
#undef 	CONFIG_CONS_NONE		/* define if console on neither */
#define CONFIG_CONS_INDEX	1	/* which SMC/SCC channel for console */

/*
 * select ethernet configuration
 *
 * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
 * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
 * for FCC)
 *
 * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
 * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
 * from CONFIG_COMMANDS to remove support for networking.
 */
#undef	CONFIG_ETHER_ON_SCC		/* define if ethernet on SCC	*/
#define	CONFIG_ETHER_ON_FCC		/* define if ethernet on FCC	*/
#undef	CONFIG_ETHER_NONE		/* define if ethernet on neither */
#define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */

#if (CONFIG_ETHER_INDEX == 2)

/*
 * - Rx-CLK is CLK13
 * - Tx-CLK is CLK14
 * - Select bus for bd/buffers (see 28-13)
 * - Enable Full Duplex in FSMR
 */
# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
# define CFG_CPMFCR_RAMTYPE	(0)
# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)

#endif /* CONFIG_ETHER_INDEX */


/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* enable I2C */
#define CONFIG_HARD_I2C        	1	/* I2C with hardware support */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE		0x7F


/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
#define CONFIG_8260_CLKIN	50000000	/* in Hz */

#define CONFIG_BAUDRATE		115200

#define CONFIG_COMMANDS		(CONFIG_CMD_DFL & ~CFG_CMD_KGDB)

/* Define this if you want to boot from 0x00000100. If you don't define
 * this, you will need to program the bootloader to 0xfff00000, and
 * get the hardware reset config words at 0xfe000000. The simplest
 * way to do that is to program the bootloader at both addresses.
 * It is suggested that you just let U-Boot live at 0x00000000.
 */
#define CFG_RSD_BOOT_LOW 1

/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

#define CONFIG_BOOTDELAY	5
#define CONFIG_BOOTARGS    	"devfs=mount root=ramfs"
#define CONFIG_ETHADDR		08:00:3e:26:0a:5a
#define CONFIG_NETMASK          255.255.0.0

#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
#endif

/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP				/* undef to save memory		*/
#define	CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
#else
#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
#endif
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS		16		/* max number of command args	*/
#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x01c00000	/* 4 ... 28 MB in DRAM	*/

#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/

#define	CFG_HZ			1000		/* decrementer freq: 1 ms ticks	*/

						/* valid baudrates */
#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define PHYS_SDRAM_60X		0x00000000 /* SDRAM (60x Bus) */
#define PHYS_SDRAM_60X_SIZE	0x08000000 /* 128 MB */

#define PHYS_SDRAM_LOCAL	0x40000000 /* SDRAM (Local Bus) */
#define PHYS_SDRAM_LOCAL_SIZE	0x04000000 /* 64 MB */

#define PHYS_DPRAM_PCI       	0xE8000000 /* DPRAM PPC/PCI */
#define PHYS_DPRAM_PCI_SIZE   	0x00020000 /* 128 KB */

/*#define PHYS_DPRAM_PCI_SEM	0x04020000 / * DPRAM PPC/PCI Semaphore */
/*#define PHYS_DPRAM_PCI_SEM_SIZE	0x00000001 / * 1 Byte */

#define PHYS_DPRAM_SHARC       	0xE8100000 /* DPRAM PPC/Sharc */
#define PHYS_DPRAM_SHARC_SIZE 	0x00040000 /* 256 KB */

/*#define PHYS_DPRAM_SHARC_SEM	0x04140000 / * DPRAM PPC/Sharc Semaphore */
/*#define PHYS_DPRAM_SHARC_SEM_SIZE 0x00000001 / * 1 Byte */

#define PHYS_VIRTEX_REGISTER    0xE8300000 /* FPGA implemented register */
#define PHYS_VIRTEX_REGISTER_SIZE 0x00000100

#define PHYS_USB		0x04200000 /* USB Controller (60x Bus) */
#define PHYS_USB_SIZE		0x00000002 /* 2 Bytes */

#define PHYS_IMMR		0xF0000000 /* Internal Memory Mapped Reg. */

#define PHYS_FLASH		0xFF000000 /* Flash (60x Bus) */
#define PHYS_FLASH_SIZE		0x01000000 /* 16 MB */

#define CFG_IMMR		PHYS_IMMR

/*-----------------------------------------------------------------------
 * Reset Address
 *
 * In order to reset the CPU, U-Boot jumps to a special address which
 * causes a machine check exception. The default address for this is
 * CFG_MONITOR_BASE - sizeof (ulong), which might not always work, eg. when
 * testing the monitor in RAM using a JTAG debugger.
 *
 * Just set CFG_RESET_ADDRESS to an address that you know is sure to
 * cause a bus error on your hardware.
 */
#define CFG_RESET_ADDRESS	0x20000000

/*-----------------------------------------------------------------------
 * Hard Reset Configuration Words
 */

#if defined(CFG_RSD_BOOT_LOW)
#  define  CFG_RSD_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
#else
#  define  CFG_RSD_HRCW_BOOT_FLAGS  (0)
#endif /* defined(CFG_RSD_BOOT_LOW) */

/* get the HRCW ISB field from CFG_IMMR */
#define CFG_RSD_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\
			    ((CFG_IMMR & 0x01000000) >> 7)  |\
			    ((CFG_IMMR & 0x00100000) >> 4) )

#define CFG_HRCW_MASTER	(HRCW_L2CPC10 | \
			 HRCW_DPPC11 | \
			 CFG_RSD_HRCW_IMMR |\
			 HRCW_MMR00 | \
			 HRCW_APPC10 | \
			 HRCW_CS10PC00 | \
			 HRCW_MODCK_H0000 |\
			 CFG_RSD_HRCW_BOOT_FLAGS)

/* no slaves */
#define CFG_HRCW_SLAVE1	0
#define CFG_HRCW_SLAVE2	0
#define CFG_HRCW_SLAVE3	0
#define CFG_HRCW_SLAVE4	0
#define CFG_HRCW_SLAVE5	0
#define CFG_HRCW_SLAVE6	0
#define CFG_HRCW_SLAVE7	0

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define	CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
#define	CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 * Note also that the logic that sets CFG_RAMBOOT is platform dependend.
 */
#define	CFG_SDRAM_BASE		PHYS_SDRAM_60X
#define CFG_FLASH_BASE		PHYS_FLASH
/*#define	CFG_MONITOR_BASE	0x200000 */
#define	CFG_MONITOR_BASE	CFG_FLASH_BASE
#if CFG_MONITOR_BASE < CFG_FLASH_BASE
#define CFG_RAMBOOT
#endif
#define	CFG_MONITOR_LEN		(160 << 10)	/* Reserve 160 kB for Monitor	*/
#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	63	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	12000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	3000	/* Timeout for Flash Write (in ms)	*/

/* turn off NVRAM env feature */
#undef CONFIG_NVRAM_ENV

#define	CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_ADDR	(PHYS_FLASH + 0x28000)	/* Addr of Environment Sector	*/
#define CFG_ENV_SECT_SIZE	0x8000	/* Total Size of Environment Sector	*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * HIDx - Hardware Implementation-dependent Registers			 2-11
 *-----------------------------------------------------------------------
 * HID0 also contains cache control - initially enable both caches and
 * invalidate contents, then the final state leaves only the instruction
 * cache enabled. Note that Power-On and Hard reset invalidate the caches,
 * but Soft reset does not.
 *
 * HID1 has only read-only information - nothing to set.
 */
#define CFG_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
#define CFG_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE|HID0_EMCP)
#define CFG_HID2	0

/*-----------------------------------------------------------------------
 * RMR - Reset Mode Register
 *-----------------------------------------------------------------------
 */
#define CFG_RMR		0

/*-----------------------------------------------------------------------
 * BCR - Bus Configuration					 4-25
 *-----------------------------------------------------------------------
 */
#define CFG_BCR		0x100c0000

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				 4-31
 *-----------------------------------------------------------------------
 */

#define CFG_SIUMCR	(SIUMCR_DPPC11 | SIUMCR_L2CPC10 | SIUMCR_APPC10 | \
					 SIUMCR_CS10PC01 | SIUMCR_BCTLC01)

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
 */
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_PBME | SYPCR_LBME | \
			 SYPCR_SWRI | SYPCR_SWP)

/*-----------------------------------------------------------------------
 * TMCNTSC - Time Counter Status and Control			 4-40
 *-----------------------------------------------------------------------
 * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
 * and enable Time Counter
 */
#define CFG_TMCNTSC	(TMCNTSC_SEC | TMCNTSC_ALR | TMCNTSC_TCF | TMCNTSC_TCE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		 4-42
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
 * Periodic timer
 */
#define CFG_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)

/*-----------------------------------------------------------------------
 * SCCR - System Clock Control					 9-8
 *-----------------------------------------------------------------------
 */
#define CFG_SCCR	0x00000000

/*-----------------------------------------------------------------------
 * RCCR - RISC Controller Configuration				13-7
 *-----------------------------------------------------------------------
 */
#define CFG_RCCR	0

/*
 * Init Memory Controller:
 */

#define CFG_PSDMR	0x494D2452
#define CFG_LSDMR	0x49492552

/* Flash */
#define CFG_BR0_PRELIM	(PHYS_FLASH | BRx_V)
#define CFG_OR0_PRELIM	(P2SZ_TO_AM(PHYS_FLASH_SIZE) | \
			 ORxG_BCTLD | \
			 ORxG_SCY_5_CLK)

/* DPRAM to the PCI BUS on the protocol board */
#define CFG_BR1_PRELIM	(PHYS_DPRAM_PCI | BRx_V)
#define CFG_OR1_PRELIM	(P2SZ_TO_AM(PHYS_DPRAM_PCI_SIZE) | \
			 ORxG_ACS_DIV4)

/* 60x Bus SDRAM */
#define CFG_BR2_PRELIM	(PHYS_SDRAM_60X | BRx_MS_SDRAM_P | BRx_V)
#define CFG_OR2_PRELIM	(ORxS_SIZE_TO_AM(PHYS_SDRAM_60X_SIZE) | \
			 ORxS_BPD_4 | \
			 ORxS_ROWST_PBI1_A2 | \
			 ORxS_NUMR_13 | \
			 ORxS_IBID)

/* Virtex-FPGA - Register */
#define CFG_BR3_PRELIM  (PHYS_VIRTEX_REGISTER | BRx_V)
#define CFG_OR3_PRELIM  (ORxS_SIZE_TO_AM(PHYS_VIRTEX_REGISTER_SIZE) | \
			 ORxG_SCY_1_CLK | \
			 ORxG_ACS_DIV2 | \
			 ORxG_CSNT )

/* local bus SDRAM */
#define CFG_BR4_PRELIM	(PHYS_SDRAM_LOCAL | BRx_PS_32 | BRx_MS_SDRAM_L | BRx_V)
#define CFG_OR4_PRELIM	(ORxS_SIZE_TO_AM(PHYS_SDRAM_LOCAL_SIZE) | \
			 ORxS_BPD_4 | \
			 ORxS_ROWST_PBI1_A4 | \
			 ORxS_NUMR_13)

/* DPRAM to the Sharc-Bus on the protocol board */
#define CFG_BR5_PRELIM	(PHYS_DPRAM_SHARC | BRx_V)
#define CFG_OR5_PRELIM	(P2SZ_TO_AM(PHYS_DPRAM_SHARC_SIZE) | \
			 ORxG_ACS_DIV4)

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
e2211743 WD	1	/*
	2	* (C) Copyright 2000
	3	* Murray Jensen <Murray.Jensen@cmst.csiro.au>
	4	*
	5	* (C) Copyright 2000
	6	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	7	* Marius Groeger <mgroeger@sysgo.de>
	8	*
	9	* Configuation settings for the R&S Protocol Board board.
	10	*
	11	* See file CREDITS for list of people who contributed to this
	12	* project.
	13	*
	14	* This program is free software; you can redistribute it and/or
	15	* modify it under the terms of the GNU General Public License as
	16	* published by the Free Software Foundation; either version 2 of
	17	* the License, or (at your option) any later version.
	18	*
	19	* This program is distributed in the hope that it will be useful,
	20	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	21	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	22	* GNU General Public License for more details.
	23	*
	24	* You should have received a copy of the GNU General Public License
	25	* along with this program; if not, write to the Free Software
	26	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	27	* MA 02111-1307 USA
	28	*/
	29
	30	#ifndef __CONFIG_H
	31	#define __CONFIG_H
	32
	33	/*
	34	* High Level Configuration Options
	35	* (easy to change)
	36	*/
	37
	38	#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
	39	#define CONFIG_RSD_PROTO 1 /* on a R&S Protocol Board */
	40
	41	/*
	42	* select serial console configuration
	43	*
	44	* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	45	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	46	* for SCC).
	47	*
	48	* if CONFIG_CONS_NONE is defined, then the serial console routines must
	49	* defined elsewhere.
	50	*/
	51	#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
	52	#define CONFIG_CONS_ON_SCC /* define if console on SCC */
	53	#undef CONFIG_CONS_NONE /* define if console on neither */
	54	#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */
	55
	56	/*
	57	* select ethernet configuration
	58	*
	59	* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
	60	* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
	61	* for FCC)
	62	*
	63	* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
	64	* defined elsewhere (as for the console), or CFG_CMD_NET must be removed
65	* from CONFIG_COMMANDS to remove support for networking.
66	*/
67	#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
68	#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
69	#undef CONFIG_ETHER_NONE /* define if ethernet on neither */
70	#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
71
72	#if (CONFIG_ETHER_INDEX == 2)
73
74	/*
75	* - Rx-CLK is CLK13
76	* - Tx-CLK is CLK14
77	* - Select bus for bd/buffers (see 28-13)
78	* - Enable Full Duplex in FSMR
79	*/
80	# define CFG_CMXFCR_MASK (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)
81	# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)
82	# define CFG_CPMFCR_RAMTYPE (0)
83	# define CFG_FCC_PSMR (FCC_PSMR_FDE \| FCC_PSMR_LPB)
84
85	#endif /* CONFIG_ETHER_INDEX */
86
87
88	/* allow to overwrite serial and ethaddr */
89	#define CONFIG_ENV_OVERWRITE
90
91	/* enable I2C */
92	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
93	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
94	#define CFG_I2C_SLAVE 0x7F
95
96
97	/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
98	#define CONFIG_8260_CLKIN 50000000 /* in Hz */
99
100	#define CONFIG_BAUDRATE 115200
101
102	#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_KGDB)
103
104	/* Define this if you want to boot from 0x00000100. If you don't define
105	* this, you will need to program the bootloader to 0xfff00000, and
106	* get the hardware reset config words at 0xfe000000. The simplest
107	* way to do that is to program the bootloader at both addresses.
108	* It is suggested that you just let U-Boot live at 0x00000000.
109	*/
110	#define CFG_RSD_BOOT_LOW 1
111
112	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
113	#include <cmd_confdefs.h>
114
115	#define CONFIG_BOOTDELAY 5
116	#define CONFIG_BOOTARGS "devfs=mount root=ramfs"
117	#define CONFIG_ETHADDR 08:00:3e:26:0a:5a
118	#define CONFIG_NETMASK 255.255.0.0
119
120	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
121	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
122	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
123	#endif
124
125	/*
126	* Miscellaneous configurable options
127	*/
128	#define CFG_LONGHELP /* undef to save memory */
129	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
130	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
131	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
132	#else
133	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
134	#endif
135	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
136	#define CFG_MAXARGS 16 /* max number of command args */
137	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
138
139	#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
140	#define CFG_MEMTEST_END 0x01c00000 /* 4 ... 28 MB in DRAM */
141
142	#define CFG_LOAD_ADDR 0x100000 /* default load address */
143
144	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
145
146	/* valid baudrates */
147	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
148
149	/*
150	* Low Level Configuration Settings
151	* (address mappings, register initial values, etc.)
152	* You should know what you are doing if you make changes here.
153	*/
154
155	/*-----------------------------------------------------------------------
156	* Physical Memory Map
157	*/
158	#define PHYS_SDRAM_60X 0x00000000 /* SDRAM (60x Bus) */
159	#define PHYS_SDRAM_60X_SIZE 0x08000000 /* 128 MB */
160
161	#define PHYS_SDRAM_LOCAL 0x40000000 /* SDRAM (Local Bus) */
162	#define PHYS_SDRAM_LOCAL_SIZE 0x04000000 /* 64 MB */
163
164	#define PHYS_DPRAM_PCI 0xE8000000 /* DPRAM PPC/PCI */
165	#define PHYS_DPRAM_PCI_SIZE 0x00020000 /* 128 KB */
166
167	/#define PHYS_DPRAM_PCI_SEM 0x04020000 / DPRAM PPC/PCI Semaphore */
168	/#define PHYS_DPRAM_PCI_SEM_SIZE 0x00000001 / 1 Byte */
169
170	#define PHYS_DPRAM_SHARC 0xE8100000 /* DPRAM PPC/Sharc */
171	#define PHYS_DPRAM_SHARC_SIZE 0x00040000 /* 256 KB */
172
173	/#define PHYS_DPRAM_SHARC_SEM 0x04140000 / DPRAM PPC/Sharc Semaphore */
174	/#define PHYS_DPRAM_SHARC_SEM_SIZE 0x00000001 / 1 Byte */
175
176	#define PHYS_VIRTEX_REGISTER 0xE8300000 /* FPGA implemented register */
177	#define PHYS_VIRTEX_REGISTER_SIZE 0x00000100
178
179	#define PHYS_USB 0x04200000 /* USB Controller (60x Bus) */
180	#define PHYS_USB_SIZE 0x00000002 /* 2 Bytes */
181
182	#define PHYS_IMMR 0xF0000000 /* Internal Memory Mapped Reg. */
183
184	#define PHYS_FLASH 0xFF000000 /* Flash (60x Bus) */
185	#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
186
187	#define CFG_IMMR PHYS_IMMR
188
189	/*-----------------------------------------------------------------------
190	* Reset Address
191	*
192	* In order to reset the CPU, U-Boot jumps to a special address which
193	* causes a machine check exception. The default address for this is
194	* CFG_MONITOR_BASE - sizeof (ulong), which might not always work, eg. when
195	* testing the monitor in RAM using a JTAG debugger.
196	*
197	* Just set CFG_RESET_ADDRESS to an address that you know is sure to
198	* cause a bus error on your hardware.
199	*/
200	#define CFG_RESET_ADDRESS 0x20000000
201
202	/*-----------------------------------------------------------------------
203	* Hard Reset Configuration Words
204	*/
205
206	#if defined(CFG_RSD_BOOT_LOW)
207	# define CFG_RSD_HRCW_BOOT_FLAGS (HRCW_CIP \| HRCW_BMS)
208	#else
209	# define CFG_RSD_HRCW_BOOT_FLAGS (0)
210	#endif /* defined(CFG_RSD_BOOT_LOW) */
211
212	/* get the HRCW ISB field from CFG_IMMR */
213	#define CFG_RSD_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) \|\
8bde7f77 WD	214	((CFG_IMMR & 0x01000000) >> 7) \|\
8bde7f77 WD	215	((CFG_IMMR & 0x00100000) >> 4) )
e2211743 WD	216
	217	#define CFG_HRCW_MASTER (HRCW_L2CPC10 \| \
	218	HRCW_DPPC11 \| \
8bde7f77 WD	219	CFG_RSD_HRCW_IMMR \|\
	220	HRCW_MMR00 \| \
	221	HRCW_APPC10 \| \
	222	HRCW_CS10PC00 \| \
	223	HRCW_MODCK_H0000 \|\
e2211743 WD	224	CFG_RSD_HRCW_BOOT_FLAGS)
	225
	226	/* no slaves */
	227	#define CFG_HRCW_SLAVE1 0
	228	#define CFG_HRCW_SLAVE2 0
	229	#define CFG_HRCW_SLAVE3 0
	230	#define CFG_HRCW_SLAVE4 0
	231	#define CFG_HRCW_SLAVE5 0
	232	#define CFG_HRCW_SLAVE6 0
	233	#define CFG_HRCW_SLAVE7 0
	234
	235	/*-----------------------------------------------------------------------
	236	* Definitions for initial stack pointer and data area (in DPRAM)
	237	*/
	238	#define CFG_INIT_RAM_ADDR CFG_IMMR
	239	#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
	240	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	241	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	242	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	243
	244	/*-----------------------------------------------------------------------
	245	* Start addresses for the final memory configuration
	246	* (Set up by the startup code)
	247	* Please note that CFG_SDRAM_BASE _must_ start at 0
	248	* Note also that the logic that sets CFG_RAMBOOT is platform dependend.
	249	*/
	250	#define CFG_SDRAM_BASE PHYS_SDRAM_60X
	251	#define CFG_FLASH_BASE PHYS_FLASH
	252	/#define CFG_MONITOR_BASE 0x200000 /
	253	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	254	#if CFG_MONITOR_BASE < CFG_FLASH_BASE
	255	#define CFG_RAMBOOT
	256	#endif
	257	#define CFG_MONITOR_LEN (160 << 10) /* Reserve 160 kB for Monitor */
	258	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	259
	260	/*
	261	* For booting Linux, the board info and command line data
	262	* have to be in the first 8 MB of memory, since this is
	263	* the maximum mapped by the Linux kernel during initialization.
	264	*/
	265	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	266
	267	/*-----------------------------------------------------------------------
	268	* FLASH and environment organization
	269	*/
	270	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
	271	#define CFG_MAX_FLASH_SECT 63 /* max number of sectors on one chip */
	272
	273	#define CFG_FLASH_ERASE_TOUT 12000 /* Timeout for Flash Erase (in ms) */
	274	#define CFG_FLASH_WRITE_TOUT 3000 /* Timeout for Flash Write (in ms) */
	275
	276	/* turn off NVRAM env feature */
	277	#undef CONFIG_NVRAM_ENV
	278
	279	#define CFG_ENV_IS_IN_FLASH 1
	280	#define CFG_ENV_ADDR (PHYS_FLASH + 0x28000) /* Addr of Environment Sector */
	281	#define CFG_ENV_SECT_SIZE 0x8000 /* Total Size of Environment Sector */
	282
	283	/*-----------------------------------------------------------------------
	284	* Cache Configuration
	285	*/
	286	#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
	287	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
288	#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
289	#endif
290
291	/*-----------------------------------------------------------------------
292	* HIDx - Hardware Implementation-dependent Registers 2-11
293	*-----------------------------------------------------------------------
294	* HID0 also contains cache control - initially enable both caches and
295	* invalidate contents, then the final state leaves only the instruction
296	* cache enabled. Note that Power-On and Hard reset invalidate the caches,
297	* but Soft reset does not.
298	*
299	* HID1 has only read-only information - nothing to set.
300	*/
301	#define CFG_HID0_INIT (HID0_ICE\|HID0_DCE\|HID0_ICFI\|HID0_DCI\|HID0_IFEM\|HID0_ABE)
302	#define CFG_HID0_FINAL (HID0_ICE\|HID0_IFEM\|HID0_ABE\|HID0_EMCP)
303	#define CFG_HID2 0
304
305	/*-----------------------------------------------------------------------
306	* RMR - Reset Mode Register
307	*-----------------------------------------------------------------------
308	*/
309	#define CFG_RMR 0
310
311	/*-----------------------------------------------------------------------
312	* BCR - Bus Configuration 4-25
313	*-----------------------------------------------------------------------
314	*/
315	#define CFG_BCR 0x100c0000
316
317	/*-----------------------------------------------------------------------
318	* SIUMCR - SIU Module Configuration 4-31
319	*-----------------------------------------------------------------------
320	*/
321
322	#define CFG_SIUMCR (SIUMCR_DPPC11 \| SIUMCR_L2CPC10 \| SIUMCR_APPC10 \| \
323	SIUMCR_CS10PC01 \| SIUMCR_BCTLC01)
324
325	/*-----------------------------------------------------------------------
326	* SYPCR - System Protection Control 11-9
327	* SYPCR can only be written once after reset!
328	*-----------------------------------------------------------------------
329	* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
330	*/
331	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_PBME \| SYPCR_LBME \| \
332	SYPCR_SWRI \| SYPCR_SWP)
333
334	/*-----------------------------------------------------------------------
335	* TMCNTSC - Time Counter Status and Control 4-40
336	*-----------------------------------------------------------------------
337	* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
338	* and enable Time Counter
339	*/
340	#define CFG_TMCNTSC (TMCNTSC_SEC \| TMCNTSC_ALR \| TMCNTSC_TCF \| TMCNTSC_TCE)
341
342	/*-----------------------------------------------------------------------
343	* PISCR - Periodic Interrupt Status and Control 4-42
344	*-----------------------------------------------------------------------
345	* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
346	* Periodic timer
347	*/
348	#define CFG_PISCR (PISCR_PS\|PISCR_PTF\|PISCR_PTE)
349
350	/*-----------------------------------------------------------------------
351	* SCCR - System Clock Control 9-8
352	*-----------------------------------------------------------------------
353	*/
354	#define CFG_SCCR 0x00000000
355
356	/*-----------------------------------------------------------------------
357	* RCCR - RISC Controller Configuration 13-7
358	*-----------------------------------------------------------------------
359	*/
360	#define CFG_RCCR 0
361
362	/*
363	* Init Memory Controller:
364	*/
365
366	#define CFG_PSDMR 0x494D2452
367	#define CFG_LSDMR 0x49492552
368
369	/* Flash */
370	#define CFG_BR0_PRELIM (PHYS_FLASH \| BRx_V)
371	#define CFG_OR0_PRELIM (P2SZ_TO_AM(PHYS_FLASH_SIZE) \| \
372	ORxG_BCTLD \| \
373	ORxG_SCY_5_CLK)
374
375	/* DPRAM to the PCI BUS on the protocol board */
376	#define CFG_BR1_PRELIM (PHYS_DPRAM_PCI \| BRx_V)
377	#define CFG_OR1_PRELIM (P2SZ_TO_AM(PHYS_DPRAM_PCI_SIZE) \| \
378	ORxG_ACS_DIV4)
379
380	/* 60x Bus SDRAM */
381	#define CFG_BR2_PRELIM (PHYS_SDRAM_60X \| BRx_MS_SDRAM_P \| BRx_V)
382	#define CFG_OR2_PRELIM (ORxS_SIZE_TO_AM(PHYS_SDRAM_60X_SIZE) \| \
383	ORxS_BPD_4 \| \
384	ORxS_ROWST_PBI1_A2 \| \
385	ORxS_NUMR_13 \| \
386	ORxS_IBID)
387
388	/* Virtex-FPGA - Register */
389	#define CFG_BR3_PRELIM (PHYS_VIRTEX_REGISTER \| BRx_V)
390	#define CFG_OR3_PRELIM (ORxS_SIZE_TO_AM(PHYS_VIRTEX_REGISTER_SIZE) \| \
8bde7f77 WD	391	ORxG_SCY_1_CLK \| \
	392	ORxG_ACS_DIV2 \| \
	393	ORxG_CSNT )
e2211743 WD	394
	395	/* local bus SDRAM */
	396	#define CFG_BR4_PRELIM (PHYS_SDRAM_LOCAL \| BRx_PS_32 \| BRx_MS_SDRAM_L \| BRx_V)
	397	#define CFG_OR4_PRELIM (ORxS_SIZE_TO_AM(PHYS_SDRAM_LOCAL_SIZE) \| \
	398	ORxS_BPD_4 \| \
	399	ORxS_ROWST_PBI1_A4 \| \
	400	ORxS_NUMR_13)
	401
	402	/* DPRAM to the Sharc-Bus on the protocol board */
	403	#define CFG_BR5_PRELIM (PHYS_DPRAM_SHARC \| BRx_V)
	404	#define CFG_OR5_PRELIM (P2SZ_TO_AM(PHYS_DPRAM_SHARC_SIZE) \| \
	405	ORxG_ACS_DIV4)
	406
	407	/*
	408	* Internal Definitions
	409	*
	410	* Boot Flags
	411	*/
	412	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	413	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	414
	415	#endif /* __CONFIG_H */