[people/ms/u-boot.git] / include / configs / s5pc210_universal.h

/*
 * Copyright (C) 2010 Samsung Electronics
 * Minkyu Kang <mk7.kang@samsung.com>
 *
 * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_UNIVERSAL_H
#define __CONFIG_UNIVERSAL_H

#include <configs/exynos4-dt.h>

#define CONFIG_SYS_PROMPT	"Universal # "	/* Monitor Command Prompt */

#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE	exynos4210-universal_c210

#define CONFIG_TIZEN			/* TIZEN lib */

/* Keep L2 Cache Disabled */
#define CONFIG_SYS_L2CACHE_OFF		1

/* Universal has 2 banks of DRAM */
#define CONFIG_NR_DRAM_BANKS		2
#define CONFIG_SYS_SDRAM_BASE		0x40000000
#define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE

#define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))

/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE			115200

/* Console configuration */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

#define CONFIG_BOOTARGS			"Please use defined boot"
#define CONFIG_BOOTCOMMAND		"run mmcboot"
#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"

#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
					- GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */

#define CONFIG_SYS_MONITOR_BASE	0x00000000

/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)

#define CONFIG_SYS_TEXT_BASE		0x44800000

#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
#define MTDIDS_DEFAULT		"onenand0=samsung-onenand"

#define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
				"128k(s-boot)"\
				",896k(bootloader)"\
				",256k(params)"\
				",2816k(config)"\
				",8m(csa)"\
				",7m(kernel)"\
				",1m(log)"\
				",12m(modem)"\
				",60m(qboot)"\
				",-(UBI)\0"

#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT

#define MBRPARTS_DEFAULT	"20M(permanent)"\
				",20M(boot)"\
				",1G(system)"\
				",100M(swap)"\
				",-(UMS)\0"

#define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
#define CONFIG_BOOTBLOCK	"10"
#define CONFIG_UBIBLOCK		"9"

#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
#define CONFIG_ENV_SIZE			4096
#define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */

#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
#define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
				"${mtdparts}"

#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"

#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"updateb=" \
		"onenand erase 0x0 0x100000;" \
		"onenand write 0x42008000 0x0 0x100000\0" \
	"updatek=" \
		"onenand erase 0xc00000 0x500000;" \
		"onenand write 0x41008000 0xc00000 0x500000\0" \
	"bootk=" \
		"run loaduimage; bootm 0x40007FC0\0" \
	"updatebackup=" \
		"mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
		"mmc dev 0 0\0" \
	"updatebootb=" \
		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
	"lpj=lpj=3981312\0" \
	"ubifsboot=" \
		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
	"tftpboot=" \
		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
		CONFIG_ENV_COMMON_BOOT \
		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
	"nfsboot=" \
		"set bootargs root=/dev/nfs rw " \
		"nfsroot=${nfsroot},nolock,tcp " \
		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
		"; run bootk\0" \
	"ramfsboot=" \
		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
		"${console} ${meminfo} " \
		"initrd=0x43000000,8M ramdisk=8192\0" \
	"mmcboot=" \
		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
		"run loaduimage; bootm 0x40007FC0\0" \
	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
	"verify=n\0" \
	"rootfstype=ext4\0" \
	"console=" CONFIG_DEFAULT_CONSOLE \
	"mtdparts=" MTDPARTS_DEFAULT \
	"mbrparts=" MBRPARTS_DEFAULT \
	"meminfo=crashkernel=32M@0x50000000\0" \
	"nfsroot=/nfsroot/arm\0" \
	"bootblock=" CONFIG_BOOTBLOCK "\0" \
	"ubiblock=" CONFIG_UBIBLOCK" \0" \
	"ubi=enabled\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
	"mmcdev=0\0" \
	"mmcbootpart=2\0" \
	"mmcrootpart=3\0" \
	"opts=always_resume=1"

#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SAMSUNG_ONENAND
#define CONFIG_SYS_ONENAND_BASE		0x0C000000

#include <asm/arch/gpio.h>
/*
 * I2C Settings
 */
#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)

#define CONFIG_CMD_I2C

#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
#define CONFIG_SYS_I2C_SOFT_SPEED	50000
#define CONFIG_SYS_I2C_SOFT_SLAVE	0
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS	7

#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_MAX8998

#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED

/*
 * SPI Settings
 */
#define CONFIG_SOFT_SPI
#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)

#define SPI_DELAY udelay(1)
#undef SPI_INIT
#define SPI_SCL(bit) universal_spi_scl(bit)
#define SPI_SDA(bit) universal_spi_sda(bit)
#define SPI_READ universal_spi_read()
#ifndef	__ASSEMBLY__
void universal_spi_scl(int bit);
void universal_spi_sda(int bit);
int universal_spi_read(void);
#endif

/* Common misc for Samsung */
#define CONFIG_MISC_COMMON

#define CONFIG_MISC_INIT_R

/* Download menu - Samsung common */
#define CONFIG_LCD_MENU
#define CONFIG_LCD_MENU_BOARD

/* Download menu - definitions for check keys */
#ifndef __ASSEMBLY__
#include <power/max8998_pmic.h>

#define KEY_PWR_PMIC_NAME		"MAX8998_PMIC"
#define KEY_PWR_STATUS_REG		MAX8998_REG_STATUS1
#define KEY_PWR_STATUS_MASK		(1 << 7)
#define KEY_PWR_INTERRUPT_REG		MAX8998_REG_IRQ1
#define KEY_PWR_INTERRUPT_MASK		(1 << 7)

#define KEY_VOL_UP_GPIO			exynos4_gpio_get(2, x2, 0)
#define KEY_VOL_DOWN_GPIO		exynos4_gpio_get(2, x2, 1)
#endif /* __ASSEMBLY__ */

/* LCD console */
#define LCD_BPP			LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK

/*
 * LCD Settings
 */
#define CONFIG_EXYNOS_FB
#define CONFIG_LCD
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_LD9040
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)

#define LCD_XRES	480
#define LCD_YRES	800

#endif	/* __CONFIG_H */
Commit	Line	Data
9e40808c MK	1	/*
	2	* Copyright (C) 2010 Samsung Electronics
	3	* Minkyu Kang <mk7.kang@samsung.com>
	4	*
393cb361	5	* Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
9e40808c	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
9e40808c MK	8	*/
9e40808c MK	9
3f41ffe4 PW	10	#ifndef __CONFIG_UNIVERSAL_H
3f41ffe4 PW	11	#define __CONFIG_UNIVERSAL_H
9e40808c	12
3f41ffe4 PW	13	#include <configs/exynos4-dt.h>
	14
	15	#define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */
9e40808c	16
3f41ffe4 PW	17	#undef CONFIG_DEFAULT_DEVICE_TREE
3f41ffe4 PW	18	#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-universal_c210
9e40808c	19
3f41ffe4	20	#define CONFIG_TIZEN /* TIZEN lib */
9e40808c MK	21
9e40808c MK	22	/* Keep L2 Cache Disabled */
e47f2db5	23	#define CONFIG_SYS_L2CACHE_OFF 1
9e40808c	24
3f41ffe4 PW	25	/* Universal has 2 banks of DRAM */
3f41ffe4 PW	26	#define CONFIG_NR_DRAM_BANKS 2
9e40808c	27	#define CONFIG_SYS_SDRAM_BASE 0x40000000
3f41ffe4	28	#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
9e40808c	29
3f41ffe4	30	#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
9e40808c MK	31
9e40808c MK	32	/* Size of malloc() pool */
3f41ffe4	33	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
9e40808c MK	34
9e40808c MK	35	/* select serial console configuration */
3f41ffe4 PW	36	#define CONFIG_SERIAL2
	37	#define CONFIG_BAUDRATE 115200
	38
	39	/* Console configuration */
	40	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	41	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	42
	43	#define CONFIG_BOOTARGS "Please use defined boot"
	44	#define CONFIG_BOOTCOMMAND "run mmcboot"
	45	#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
	46
	47	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
	48	- GENERATED_GBL_DATA_SIZE)
	49
	50	#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
	51
	52	#define CONFIG_SYS_MONITOR_BASE 0x00000000
	53
	54	/* memtest works on */
	55	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	56	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
	57	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
	58
	59	#define CONFIG_SYS_TEXT_BASE 0x44800000
9e40808c MK	60
	61	#define CONFIG_MTD_DEVICE
	62	#define CONFIG_MTD_PARTITIONS
	63
	64	/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
	65	#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
	66
	67	#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\
	68	"128k(s-boot)"\
	69	",896k(bootloader)"\
	70	",256k(params)"\
	71	",2816k(config)"\
	72	",8m(csa)"\
	73	",7m(kernel)"\
	74	",1m(log)"\
	75	",12m(modem)"\
	76	",60m(qboot)"\
	77	",-(UBI)\0"
	78
	79	#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
	80
	81	#define MBRPARTS_DEFAULT "20M(permanent)"\
	82	",20M(boot)"\
	83	",1G(system)"\
	84	",100M(swap)"\
	85	",-(UMS)\0"
	86
9e40808c MK	87	#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
	88	#define CONFIG_BOOTBLOCK "10"
	89	#define CONFIG_UBIBLOCK "9"
	90
3f41ffe4 PW	91	#define CONFIG_ENV_IS_IN_MMC
	92	#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
	93	#define CONFIG_ENV_SIZE 4096
	94	#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
	95
9e40808c MK	96	#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
	97	#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
	98	"${mtdparts}"
	99
	100	#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
	101
815a6072 PW	102	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	103	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	104
9e40808c MK	105	#define CONFIG_EXTRA_ENV_SETTINGS \
	106	"updateb=" \
	107	"onenand erase 0x0 0x100000;" \
	108	"onenand write 0x42008000 0x0 0x100000\0" \
	109	"updatek=" \
	110	"onenand erase 0xc00000 0x500000;" \
	111	"onenand write 0x41008000 0xc00000 0x500000\0" \
	112	"bootk=" \
	113	"run loaduimage; bootm 0x40007FC0\0" \
9e40808c	114	"updatebackup=" \
188c42b3 JC	115	"mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
188c42b3 JC	116	"mmc dev 0 0\0" \
9e40808c MK	117	"updatebootb=" \
	118	"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
	119	"lpj=lpj=3981312\0" \
	120	"ubifsboot=" \
	121	"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
	122	CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
	123	CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
	124	"tftpboot=" \
	125	"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
	126	CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
	127	CONFIG_ENV_COMMON_BOOT \
	128	"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
	129	"nfsboot=" \
	130	"set bootargs root=/dev/nfs rw " \
	131	"nfsroot=${nfsroot},nolock,tcp " \
	132	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	133	"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
	134	"; run bootk\0" \
	135	"ramfsboot=" \
	136	"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
	137	"${console} ${meminfo} " \
	138	"initrd=0x43000000,8M ramdisk=8192\0" \
	139	"mmcboot=" \
	140	"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
	141	"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
	142	"run loaduimage; bootm 0x40007FC0\0" \
	143	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
	144	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
	145	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
	146	"verify=n\0" \
	147	"rootfstype=ext4\0" \
	148	"console=" CONFIG_DEFAULT_CONSOLE \
	149	"mtdparts=" MTDPARTS_DEFAULT \
	150	"mbrparts=" MBRPARTS_DEFAULT \
	151	"meminfo=crashkernel=32M@0x50000000\0" \
	152	"nfsroot=/nfsroot/arm\0" \
	153	"bootblock=" CONFIG_BOOTBLOCK "\0" \
	154	"ubiblock=" CONFIG_UBIBLOCK" \0" \
	155	"ubi=enabled\0" \
	156	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
	157	"mmcdev=0\0" \
	158	"mmcbootpart=2\0" \
	159	"mmcrootpart=3\0" \
	160	"opts=always_resume=1"
	161
9e40808c	162	#define CONFIG_USE_ONENAND_BOARD_INIT
a08a649d	163	#define CONFIG_SAMSUNG_ONENAND
9e40808c MK	164	#define CONFIG_SYS_ONENAND_BASE 0x0C000000
9e40808c MK	165
2427f5d5 ŁM	166	#include <asm/arch/gpio.h>
	167	/*
	168	* I2C Settings
	169	*/
8475c869 PM	170	#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
8475c869 PM	171	#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
2427f5d5	172
3f41ffe4 PW	173	#define CONFIG_CMD_I2C
3f41ffe4 PW	174
ea818dbb HS	175	#define CONFIG_SYS_I2C
	176	#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
	177	#define CONFIG_SYS_I2C_SOFT_SPEED 50000
	178	#define CONFIG_SYS_I2C_SOFT_SLAVE 0
2427f5d5	179	#define CONFIG_SOFT_I2C_READ_REPEATED_START
2427f5d5 ŁM	180	#define CONFIG_I2C_MULTI_BUS
	181	#define CONFIG_SYS_MAX_I2C_BUS 7
	182
be3b51aa ŁM	183	#define CONFIG_POWER
	184	#define CONFIG_POWER_I2C
	185	#define CONFIG_POWER_MAX8998
2427f5d5	186
ddc7e541 ŁM	187	#define CONFIG_USB_GADGET
	188	#define CONFIG_USB_GADGET_S3C_UDC_OTG
	189	#define CONFIG_USB_GADGET_DUALSPEED
	190
ff0fedd5 PW	191	/*
	192	* SPI Settings
	193	*/
	194	#define CONFIG_SOFT_SPI
	195	#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
8475c869 PM	196	#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
	197	#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
	198	#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
	199	#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
ff0fedd5 PW	200
	201	#define SPI_DELAY udelay(1)
	202	#undef SPI_INIT
	203	#define SPI_SCL(bit) universal_spi_scl(bit)
	204	#define SPI_SDA(bit) universal_spi_sda(bit)
	205	#define SPI_READ universal_spi_read()
	206	#ifndef __ASSEMBLY__
	207	void universal_spi_scl(int bit);
	208	void universal_spi_sda(int bit);
	209	int universal_spi_read(void);
	210	#endif
	211
679549d1 PM	212	/* Common misc for Samsung */
	213	#define CONFIG_MISC_COMMON
	214
	215	#define CONFIG_MISC_INIT_R
	216
82b0a055 PM	217	/* Download menu - Samsung common */
	218	#define CONFIG_LCD_MENU
	219	#define CONFIG_LCD_MENU_BOARD
	220
	221	/* Download menu - definitions for check keys */
	222	#ifndef __ASSEMBLY__
	223	#include <power/max8998_pmic.h>
	224
	225	#define KEY_PWR_PMIC_NAME "MAX8998_PMIC"
	226	#define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1
	227	#define KEY_PWR_STATUS_MASK (1 << 7)
	228	#define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1
	229	#define KEY_PWR_INTERRUPT_MASK (1 << 7)
	230
	231	#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0)
	232	#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1)
	233	#endif /* __ASSEMBLY__ */
	234
	235	/* LCD console */
	236	#define LCD_BPP LCD_COLOR16
	237	#define CONFIG_SYS_WHITE_ON_BLACK
	238
d984b9f8 PW	239	/*
	240	* LCD Settings
	241	*/
	242	#define CONFIG_EXYNOS_FB
	243	#define CONFIG_LCD
	244	#define CONFIG_CMD_BMP
2df21cb3	245	#define CONFIG_BMP_16BPP
d984b9f8	246	#define CONFIG_LD9040
d984b9f8	247	#define CONFIG_VIDEO_BMP_GZIP
903afe18	248	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
d984b9f8	249
3f41ffe4 PW	250	#define LCD_XRES 480
	251	#define LCD_YRES 800
	252
9e40808c	253	#endif /* __CONFIG_H */