[people/ms/u-boot.git] / include / configs / sequoia.h

/*
 * (C) Copyright 2006-2007
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * (C) Copyright 2006
 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
 * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/************************************************************************
 * sequoia.h - configuration for Sequoia & Rainier boards
 ***********************************************************************/
#ifndef __CONFIG_H
#define __CONFIG_H

/*-----------------------------------------------------------------------
 * High Level Configuration Options
 *----------------------------------------------------------------------*/
/* This config file is used for Sequoia (440EPx) and Rainier (440GRx)	*/
#ifndef CONFIG_RAINIER
#define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
#else
#define CONFIG_440GRX		1		/* Specific PPC440GRx	*/
#endif
#define CONFIG_440		1		/* ... PPC440 family	*/
#define CONFIG_4xx		1		/* ... PPC4xx family	*/
/* Detect Sequoia PLL input clock automatically via CPLD bit		*/
#define CONFIG_SYS_CLK_FREQ    ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
				33333333 : 33000000)

#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/

/*-----------------------------------------------------------------------
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 *----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/

#define CFG_BOOT_BASE_ADDR	0xf0000000
#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
#define CFG_FLASH_BASE		0xfc000000	/* start of FLASH	*/
#define CFG_MONITOR_BASE	TEXT_BASE
#define CFG_NAND_ADDR		0xd0000000      /* NAND Flash		*/
#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000

/* Don't change either of these */
#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/

#define CFG_USB2D0_BASE		0xe0000100
#define CFG_USB_DEVICE		0xe0000000
#define CFG_USB_HOST		0xe0000400
#define CFG_BCSR_BASE		0xc0000000

/*-----------------------------------------------------------------------
 * Initial RAM & stack pointer
 *----------------------------------------------------------------------*/
/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
#define CFG_INIT_RAM_END	(4 << 10)
#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR

/*-----------------------------------------------------------------------
 * Serial Port
 *----------------------------------------------------------------------*/
#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
#define CONFIG_BAUDRATE		115200
#define CONFIG_SERIAL_MULTI     1
/* define this if you want console on UART1 */
#undef CONFIG_UART1_CONSOLE

#define CFG_BAUDRATE_TABLE						\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

/*-----------------------------------------------------------------------
 * Environment
 *----------------------------------------------------------------------*/
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
#else
#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
#define CFG_ENV_IS_EMBEDDED	1	/* use embedded environment */
#endif

/*-----------------------------------------------------------------------
 * FLASH related
 *----------------------------------------------------------------------*/
#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/

#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }

#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/

#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/

#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/

/* Address and size of Redundant Environment Sector	*/
#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
#endif

/*
 * IPL (Initial Program Loader, integrated inside CPU)
 * Will load first 4k from NAND (SPL) into cache and execute it from there.
 *
 * SPL (Secondary Program Loader)
 * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
 * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
 * controller and the NAND controller so that the special U-Boot image can be
 * loaded from NAND to SDRAM.
 *
 * NUB (NAND U-Boot)
 * This NAND U-Boot (NUB) is a special U-Boot version which can be started
 * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
 *
 * On 440EPx the SPL is copied to SDRAM before the NAND controller is
 * set up. While still running from cache, I experienced problems accessing
 * the NAND controller.	sr - 2006-08-25
 */
#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here	*/
#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)

/*
 * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
 */
#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/

/*
 * Now the NAND chip has to be defined (no autodetection used!)
 */
#define CFG_NAND_PAGE_SIZE	512		/* NAND chip page size		*/
#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
#define CFG_NAND_PAGE_COUNT	32		/* NAND chip page count		*/
#define CFG_NAND_BAD_BLOCK_POS	5		/* Location of bad block marker	*/
#undef CFG_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/

#define CFG_NAND_ECCSIZE	256
#define CFG_NAND_ECCBYTES	3
#define CFG_NAND_ECCSTEPS	(CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
#define CFG_NAND_OOBSIZE	16
#define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}

#ifdef CFG_ENV_IS_IN_NAND
/*
 * For NAND booting the environment is embedded in the U-Boot image. Please take
 * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
 */
#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
#endif

/*-----------------------------------------------------------------------
 * DDR SDRAM
 *----------------------------------------------------------------------*/
#define CFG_MBYTES_SDRAM        (256)		/* 256MB			*/
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_DDR_DATA_EYE			/* use DDR2 optimization	*/
#endif

/*-----------------------------------------------------------------------
 * I2C
 *----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
#define CFG_I2C_SLAVE		0x7F

#define CFG_I2C_MULTI_EEPROMS
#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10

/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
#define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
#define CONFIG_DTT_AD7414	1		/* use AD7414		*/
#define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
#define CFG_DTT_MAX_TEMP	70
#define CFG_DTT_LOW_TEMP	-30
#define CFG_DTT_HYSTERESIS	3

#define CONFIG_PREBOOT	"echo;"						\
	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	"echo"

#undef	CONFIG_BOOTARGS

/* Setup some board specific values for the default environment variables */
#ifndef CONFIG_RAINIER
#define CONFIG_HOSTNAME		sequoia
#define CFG_BOOTFILE		"bootfile=/tftpboot/sequoia/uImage\0"
#define CFG_ROOTPATH		"rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_HOSTNAME		rainier
#define CFG_BOOTFILE		"bootfile=/tftpboot/rainier/uImage\0"
#define CFG_ROOTPATH		"rootpath=/opt/eldk/ppc_4xx\0"
#endif

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	CFG_BOOTFILE							\
	CFG_ROOTPATH							\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
	"flash_nfs=run nfsargs addip addtty;"				\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip addtty;"				\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
	        "bootm\0"						\
	"kernel_addr=FC000000\0"					\
	"ramdisk_addr=FC180000\0"					\
	"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0"		\
	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
		"cp.b 200000 FFFA0000 60000\0"			        \
	"upd=run load;run update\0"					\
	""
#define CONFIG_BOOTCOMMAND	"run flash_self"

#if 0
#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#endif

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define CONFIG_M88E1111_PHY	1
#define	CONFIG_IBM_EMAC4_V4	1
#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0	/* PHY address, See schematics	*/

#define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */

#define CONFIG_HAS_ETH0
#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */

#define CONFIG_NET_MULTI	1
#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
#define CONFIG_PHY1_ADDR	1

/* USB */
#ifdef CONFIG_440EPX
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE

/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE

#endif /* CONFIG_440EPX */

/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_ISO_PARTITION


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DTT
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM

#ifdef CONFIG_440EPX
#define CONFIG_CMD_USB
#endif


/* POST support */
#define CONFIG_POST		(CFG_POST_MEMORY   | \
				 CFG_POST_CPU	   | \
				 CFG_POST_UART	   | \
				 CFG_POST_I2C	   | \
				 CFG_POST_SPR)

#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
#define CONFIG_LOGBUFFER

#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */

#define CONFIG_SUPPORT_VFAT

/*-----------------------------------------------------------------------
 * Miscellaneous configurable options
 *----------------------------------------------------------------------*/
#define CFG_LONGHELP			/* undef to save memory		*/
#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
#else
#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
#endif
#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	        16	/* max number of command args	*/
#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/

#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */

#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CONFIG_LOOPW            1       /* enable loopw command         */
#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */

/*-----------------------------------------------------------------------
 * PCI stuff
 *----------------------------------------------------------------------*/
/* General PCI */
#define CONFIG_PCI			/* include pci support	        */
#undef CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/

/* Board-specific PCI */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT

#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 *----------------------------------------------------------------------*/

/*
 * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
 */
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_NAND_CS		3		/* NAND chip connected to CSx	*/
/* Memory Bank 0 (NOR-FLASH) initialization					*/
#define CFG_EBC_PB0AP		0x03017200
#define CFG_EBC_PB0CR		(CFG_FLASH_BASE | 0xda000)

/* Memory Bank 3 (NAND-FLASH) initialization					*/
#define CFG_EBC_PB3AP		0x018003c0
#define CFG_EBC_PB3CR		(CFG_NAND_ADDR | 0x1c000)
#else
#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
/* Memory Bank 3 (NOR-FLASH) initialization					*/
#define CFG_EBC_PB3AP		0x03017200
#define CFG_EBC_PB3CR		(CFG_FLASH_BASE | 0xda000)

/* Memory Bank 0 (NAND-FLASH) initialization					*/
#define CFG_EBC_PB0AP		0x018003c0
#define CFG_EBC_PB0CR		(CFG_NAND_ADDR | 0x1c000)
#endif

/* Memory Bank 2 (CPLD) initialization						*/
#define CFG_EBC_PB2AP		0x24814580
#define CFG_EBC_PB2CR		(CFG_BCSR_BASE | 0x38000)

/*-----------------------------------------------------------------------
 * NAND FLASH
 *----------------------------------------------------------------------*/
#define CFG_MAX_NAND_DEVICE	1
#define NAND_MAX_CHIPS		1
#define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 *----------------------------------------------------------------------*/
#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
#define CFG_CACHELINE_SIZE	32	      /* ...			            */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
#endif

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
#endif
#endif	/* __CONFIG_H */
Commit	Line	Data
887e2ec9	1	/*
e802594b	2	* (C) Copyright 2006-2007
887e2ec9 SR	3	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	4	*
	5	* (C) Copyright 2006
	6	* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
	7	* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of
	12	* the License, or (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	22	* MA 02111-1307 USA
	23	*/
	24
	25	/************************************************************************
e802594b	26	* sequoia.h - configuration for Sequoia & Rainier boards
887e2ec9 SR	27	***********************************************************************/
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*-----------------------------------------------------------------------
	32	* High Level Configuration Options
	33	----------------------------------------------------------------------/
e802594b	34	/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
854bc8da	35	#ifndef CONFIG_RAINIER
887e2ec9	36	#define CONFIG_440EPX 1 /* Specific PPC440EPx */
854bc8da SR	37	#else
	38	#define CONFIG_440GRX 1 /* Specific PPC440GRx */
	39	#endif
efa35cf1	40	#define CONFIG_440 1 /* ... PPC440 family */
887e2ec9	41	#define CONFIG_4xx 1 /* ... PPC4xx family */
e3b8c78b JM	42	/* Detect Sequoia PLL input clock automatically via CPLD bit */
e3b8c78b JM	43	#define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \
193b4a3b	44	33333333 : 33000000)
887e2ec9 SR	45
	46	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
	47	#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
	48
	49	/*-----------------------------------------------------------------------
	50	* Base addresses -- Note these are effective addresses where the
	51	* actual resources get mapped (not physical addresses)
	52	----------------------------------------------------------------------/
	53	#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
	54	#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
	55
	56	#define CFG_BOOT_BASE_ADDR 0xf0000000
	57	#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
4ef62514	58	#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
887e2ec9 SR	59	#define CFG_MONITOR_BASE TEXT_BASE
	60	#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
	61	#define CFG_OCM_BASE 0xe0010000 /* ocm */
a11e0696	62	#define CFG_OCM_DATA_ADDR CFG_OCM_BASE
887e2ec9 SR	63	#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
	64	#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
	65	#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
	66	#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
	67	#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
	68
	69	/* Don't change either of these */
	70	#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
	71
	72	#define CFG_USB2D0_BASE 0xe0000100
	73	#define CFG_USB_DEVICE 0xe0000000
	74	#define CFG_USB_HOST 0xe0000400
	75	#define CFG_BCSR_BASE 0xc0000000
	76
	77	/*-----------------------------------------------------------------------
	78	* Initial RAM & stack pointer
	79	----------------------------------------------------------------------/
887e2ec9	80	/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
887e2ec9	81	#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
887e2ec9 SR	82	#define CFG_INIT_RAM_END (4 << 10)
	83	#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
	84	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
a11e0696	85	#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
887e2ec9 SR	86
	87	/*-----------------------------------------------------------------------
	88	* Serial Port
	89	----------------------------------------------------------------------/
	90	#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
	91	#define CONFIG_BAUDRATE 115200
	92	#define CONFIG_SERIAL_MULTI 1
	93	/* define this if you want console on UART1 */
	94	#undef CONFIG_UART1_CONSOLE
	95
	96	#define CFG_BAUDRATE_TABLE \
	97	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	98
	99	/*-----------------------------------------------------------------------
	100	* Environment
	101	----------------------------------------------------------------------/
d12ae808	102	#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
887e2ec9 SR	103	#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
	104	#else
	105	#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
d1a72545	106	#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
887e2ec9	107	#endif
887e2ec9 SR	108
	109	/*-----------------------------------------------------------------------
	110	* FLASH related
	111	----------------------------------------------------------------------/
	112	#define CFG_FLASH_CFI /* The flash is CFI compatible */
	113	#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
	114
	115	#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
	116
	117	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	118	#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
	119
	120	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	121	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
	122
	123	#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
	124	#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
	125
	126	#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
	127	#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
	128
	129	#ifdef CFG_ENV_IS_IN_FLASH
1636d1c8	130	#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
887e2ec9 SR	131	#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
	132	#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
	133
	134	/* Address and size of Redundant Environment Sector */
	135	#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
	136	#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
	137	#endif
	138
887e2ec9 SR	139	/*
	140	* IPL (Initial Program Loader, integrated inside CPU)
	141	* Will load first 4k from NAND (SPL) into cache and execute it from there.
	142	*
	143	* SPL (Secondary Program Loader)
	144	* Will load special U-Boot version (NUB) from NAND and execute it. This SPL
	145	* has to fit into 4kByte. It sets up the CPU and configures the SDRAM
	146	* controller and the NAND controller so that the special U-Boot image can be
	147	* loaded from NAND to SDRAM.
	148	*
	149	* NUB (NAND U-Boot)
	150	* This NAND U-Boot (NUB) is a special U-Boot version which can be started
	151	* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
	152	*
	153	* On 440EPx the SPL is copied to SDRAM before the NAND controller is
	154	* set up. While still running from cache, I experienced problems accessing
	155	* the NAND controller. sr - 2006-08-25
	156	*/
	157	#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
	158	#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
	159	#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */
	160	#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
	161	#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
	162	#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
	163
	164	/*
	165	* Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
	166	*/
	167	#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
	168	#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
	169
	170	/*
	171	* Now the NAND chip has to be defined (no autodetection used!)
	172	*/
9d909604	173	#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */
887e2ec9	174	#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
9d909604 SR	175	#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */
9d909604 SR	176	#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
887e2ec9 SR	177	#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
887e2ec9 SR	178
9d909604 SR	179	#define CFG_NAND_ECCSIZE 256
	180	#define CFG_NAND_ECCBYTES 3
	181	#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
	182	#define CFG_NAND_OOBSIZE 16
	183	#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
	184	#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
	185
887e2ec9	186	#ifdef CFG_ENV_IS_IN_NAND
d12ae808 SR	187	/*
	188	* For NAND booting the environment is embedded in the U-Boot image. Please take
	189	* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
	190	*/
	191	#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE
	192	#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
887e2ec9 SR	193	#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
	194	#endif
	195
	196	/*-----------------------------------------------------------------------
	197	* DDR SDRAM
	198	----------------------------------------------------------------------/
02388983 SR	199	#define CFG_MBYTES_SDRAM (256) /* 256MB */
	200	#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
	201	#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
	202	#endif
887e2ec9 SR	203
	204	/*-----------------------------------------------------------------------
	205	* I2C
	206	----------------------------------------------------------------------/
	207	#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
	208	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	209	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	210	#define CFG_I2C_SLAVE 0x7F
	211
	212	#define CFG_I2C_MULTI_EEPROMS
	213	#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
	214	#define CFG_I2C_EEPROM_ADDR_LEN 1
	215	#define CFG_EEPROM_PAGE_WRITE_ENABLE
	216	#define CFG_EEPROM_PAGE_WRITE_BITS 3
	217	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
	218
887e2ec9 SR	219	/* I2C SYSMON (LM75, AD7414 is almost compatible) */
	220	#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
	221	#define CONFIG_DTT_AD7414 1 /* use AD7414 */
	222	#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
	223	#define CFG_DTT_MAX_TEMP 70
	224	#define CFG_DTT_LOW_TEMP -30
	225	#define CFG_DTT_HYSTERESIS 3
	226
	227	#define CONFIG_PREBOOT "echo;" \
	228	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	229	"echo"
	230
	231	#undef CONFIG_BOOTARGS
	232
e802594b SR	233	/* Setup some board specific values for the default environment variables */
	234	#ifndef CONFIG_RAINIER
	235	#define CONFIG_HOSTNAME sequoia
	236	#define CFG_BOOTFILE "bootfile=/tftpboot/sequoia/uImage\0"
	237	#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
	238	#else
	239	#define CONFIG_HOSTNAME rainier
	240	#define CFG_BOOTFILE "bootfile=/tftpboot/rainier/uImage\0"
	241	#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
	242	#endif
	243
887e2ec9	244	#define CONFIG_EXTRA_ENV_SETTINGS \
e802594b SR	245	CFG_BOOTFILE \
e802594b SR	246	CFG_ROOTPATH \
887e2ec9	247	"netdev=eth0\0" \
887e2ec9 SR	248	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	249	"nfsroot=${serverip}:${rootpath}\0" \
	250	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	251	"addip=setenv bootargs ${bootargs} " \
	252	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	253	":${hostname}:${netdev}:off panic=1\0" \
	254	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
	255	"flash_nfs=run nfsargs addip addtty;" \
	256	"bootm ${kernel_addr}\0" \
	257	"flash_self=run ramargs addip addtty;" \
	258	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	259	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
	260	"bootm\0" \
4ef62514 SR	261	"kernel_addr=FC000000\0" \
4ef62514 SR	262	"ramdisk_addr=FC180000\0" \
e802594b	263	"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
887e2ec9	264	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
e802594b	265	"cp.b 200000 FFFA0000 60000\0" \
887e2ec9 SR	266	"upd=run load;run update\0" \
	267	""
	268	#define CONFIG_BOOTCOMMAND "run flash_self"
	269
	270	#if 0
	271	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	272	#else
	273	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	274	#endif
	275
	276	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	277	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	278
	279	#define CONFIG_M88E1111_PHY 1
	280	#define CONFIG_IBM_EMAC4_V4 1
	281	#define CONFIG_MII 1 /* MII PHY management */
	282	#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
	283
	284	#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
	285	#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
	286
	287	#define CONFIG_HAS_ETH0
	288	#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
	289
	290	#define CONFIG_NET_MULTI 1
	291	#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
	292	#define CONFIG_PHY1_ADDR 1
	293
	294	/* USB */
854bc8da	295	#ifdef CONFIG_440EPX
887e2ec9 SR	296	#define CONFIG_USB_OHCI
	297	#define CONFIG_USB_STORAGE
	298
	299	/* Comment this out to enable USB 1.1 device */
	300	#define USB_2_0_DEVICE
	301
854bc8da SR	302	#endif /* CONFIG_440EPX */
854bc8da SR	303
887e2ec9 SR	304	/* Partitions */
	305	#define CONFIG_MAC_PARTITION
	306	#define CONFIG_DOS_PARTITION
	307	#define CONFIG_ISO_PARTITION
	308
46da1e96 JL	309
	310	/*
	311	* Command line configuration.
	312	*/
	313	#include <config_cmd_default.h>
	314
	315	#define CONFIG_CMD_ASKENV
	316	#define CONFIG_CMD_DHCP
	317	#define CONFIG_CMD_DTT
	318	#define CONFIG_CMD_DIAG
	319	#define CONFIG_CMD_EEPROM
	320	#define CONFIG_CMD_ELF
	321	#define CONFIG_CMD_FAT
	322	#define CONFIG_CMD_I2C
	323	#define CONFIG_CMD_IRQ
	324	#define CONFIG_CMD_MII
	325	#define CONFIG_CMD_NAND
	326	#define CONFIG_CMD_NET
	327	#define CONFIG_CMD_NFS
	328	#define CONFIG_CMD_PCI
	329	#define CONFIG_CMD_PING
	330	#define CONFIG_CMD_REGINFO
	331	#define CONFIG_CMD_SDRAM
	332
	333	#ifdef CONFIG_440EPX
	334	#define CONFIG_CMD_USB
	335	#endif
	336
887e2ec9	337
a11e0696 IL	338	/* POST support */
	339	#define CONFIG_POST (CFG_POST_MEMORY \| \
	340	CFG_POST_CPU \| \
	341	CFG_POST_UART \| \
	342	CFG_POST_I2C \| \
	343	CFG_POST_SPR)
	344
	345	#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
	346	#define CONFIG_LOGBUFFER
	347
	348	#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
	349
887e2ec9 SR	350	#define CONFIG_SUPPORT_VFAT
887e2ec9 SR	351
887e2ec9 SR	352	/*-----------------------------------------------------------------------
	353	* Miscellaneous configurable options
	354	----------------------------------------------------------------------/
	355	#define CFG_LONGHELP /* undef to save memory */
	356	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
46da1e96	357	#if defined(CONFIG_CMD_KGDB)
887e2ec9 SR	358	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	359	#else
	360	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	361	#endif
	362	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	363	#define CFG_MAXARGS 16 /* max number of command args */
	364	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	365
	366	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	367	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
	368
	369	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	370	#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
	371
	372	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	373
	374	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
	375	#define CONFIG_LOOPW 1 /* enable loopw command */
	376	#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
	377	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	378	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
	379
	380	/*-----------------------------------------------------------------------
	381	* PCI stuff
	382	----------------------------------------------------------------------/
	383	/* General PCI */
	384	#define CONFIG_PCI /* include pci support */
23744d6b	385	#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
887e2ec9 SR	386	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	387	#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
	388
	389	/* Board-specific PCI */
887e2ec9 SR	390	#define CFG_PCI_TARGET_INIT
	391	#define CFG_PCI_MASTER_INIT
	392
	393	#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
	394	#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
	395
	396	/*
	397	* For booting Linux, the board info and command line data
	398	* have to be in the first 8 MB of memory, since this is
	399	* the maximum mapped by the Linux kernel during initialization.
	400	*/
	401	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	402
	403	/*-----------------------------------------------------------------------
	404	* External Bus Controller (EBC) Setup
	405	----------------------------------------------------------------------/
887e2ec9 SR	406
	407	/*
	408	* On Sequoia CS0 and CS3 are switched when configuring for NAND booting
	409	*/
	410	#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
	411	#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
	412	/* Memory Bank 0 (NOR-FLASH) initialization */
4be23a12	413	#define CFG_EBC_PB0AP 0x03017200
2db63365	414	#define CFG_EBC_PB0CR (CFG_FLASH_BASE \| 0xda000)
887e2ec9 SR	415
	416	/* Memory Bank 3 (NAND-FLASH) initialization */
	417	#define CFG_EBC_PB3AP 0x018003c0
2db63365	418	#define CFG_EBC_PB3CR (CFG_NAND_ADDR \| 0x1c000)
887e2ec9 SR	419	#else
	420	#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
	421	/* Memory Bank 3 (NOR-FLASH) initialization */
4be23a12	422	#define CFG_EBC_PB3AP 0x03017200
2db63365	423	#define CFG_EBC_PB3CR (CFG_FLASH_BASE \| 0xda000)
887e2ec9 SR	424
	425	/* Memory Bank 0 (NAND-FLASH) initialization */
	426	#define CFG_EBC_PB0AP 0x018003c0
2db63365	427	#define CFG_EBC_PB0CR (CFG_NAND_ADDR \| 0x1c000)
887e2ec9 SR	428	#endif
	429
	430	/* Memory Bank 2 (CPLD) initialization */
	431	#define CFG_EBC_PB2AP 0x24814580
2db63365	432	#define CFG_EBC_PB2CR (CFG_BCSR_BASE \| 0x38000)
887e2ec9	433
43a2b0e7 SR	434	/*-----------------------------------------------------------------------
	435	* NAND FLASH
	436	----------------------------------------------------------------------/
	437	#define CFG_MAX_NAND_DEVICE 1
	438	#define NAND_MAX_CHIPS 1
	439	#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
	440	#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
	441
887e2ec9 SR	442	/*-----------------------------------------------------------------------
	443	* Cache Configuration
	444	----------------------------------------------------------------------/
	445	#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
	446	#define CFG_CACHELINE_SIZE 32 /* ... */
46da1e96	447	#if defined(CONFIG_CMD_KGDB)
887e2ec9 SR	448	#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	449	#endif
	450
	451	/*
	452	* Internal Definitions
	453	*
	454	* Boot Flags
	455	*/
	456	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	457	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	458
46da1e96	459	#if defined(CONFIG_CMD_KGDB)
887e2ec9 SR	460	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	461	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	462	#endif
	463	#endif /* __CONFIG_H */