[people/ms/u-boot.git] / include / configs / socrates.h

/*
 * (C) Copyright 2008
 * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
 *
 * Wolfgang Denk <wd@denx.de>
 * Copyright 2004 Freescale Semiconductor.
 * (C) Copyright 2002,2003 Motorola,Inc.
 * Xianghua Xiao <X.Xiao@motorola.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * Socrates
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* new uImage format support */
#define CONFIG_FIT		1
#define CONFIG_OF_LIBFDT	1
#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE			*/
#define CONFIG_E500		1	/* BOOKE e500 family		*/
#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41		*/
#define CONFIG_MPC8544		1
#define CONFIG_SOCRATES		1

#define CONFIG_PCI

#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/

#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
#define CONFIG_BOARD_EARLY_INIT_R 1	/* Call board_early_init_r	*/

#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

/*
 * Only possible on E500 Version 2 or newer cores.
 */
#define CONFIG_ENABLE_36BIT_PHYS	1

/*
 * sysclk for MPC85xx
 *
 * Two valid values are:
 *    33000000
 *    66000000
 *
 * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
 * is likely the desired value here, so that is now the default.
 * The board, however, can run at 66MHz.  In any event, this value
 * must match the settings of some switches.  Details can be found
 * in the README.mpc85xxads.
 */

#ifndef CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_CLK_FREQ	66666666
#endif

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache		*/
#define CONFIG_BTB			/* toggle branch predition	*/

#define CONFIG_SYS_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions	*/

#undef	CONFIG_SYS_DRAM_TEST			/* memory test, takes time	*/
#define CONFIG_SYS_MEMTEST_START	0x00400000
#define CONFIG_SYS_MEMTEST_END		0x00C00000

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CONFIG_SYS_CCSRBAR_DEFAULT	0xFF700000	/* CCSRBAR Default	*/
#define CONFIG_SYS_CCSRBAR		0xE0000000	/* relocated CCSRBAR	*/
#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/

/* DDR Setup */
#define CONFIG_FSL_DDR2
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
#define CONFIG_DDR_SPD

#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE	0xDeadBeef

#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_VERY_BIG_RAM

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	2

/* I2C addresses of SPD EEPROMs */
#define SPD_EEPROM_ADDRESS	0x50	/* CTLR 0 DIMM 0 */

#define CONFIG_DDR_DEFAULT_CL	30		/* CAS latency 3	*/

/* Hardcoded values, to use instead of SPD */
#define CONFIG_SYS_DDR_CS0_BNDS		0x0000000f
#define CONFIG_SYS_DDR_CS0_CONFIG		0x80010102
#define CONFIG_SYS_DDR_TIMING_0		0x00260802
#define CONFIG_SYS_DDR_TIMING_1		0x3935D322
#define CONFIG_SYS_DDR_TIMING_2		0x14904CC8
#define CONFIG_SYS_DDR_MODE			0x00480432
#define CONFIG_SYS_DDR_INTERVAL		0x030C0100
#define CONFIG_SYS_DDR_CONFIG_2		0x04400000
#define CONFIG_SYS_DDR_CONFIG			0xC3008000
#define CONFIG_SYS_DDR_CLK_CONTROL		0x03800000
#define CONFIG_SYS_SDRAM_SIZE			256 /* in Megs */

/*
 * Flash on the LocalBus
 */
#define CONFIG_SYS_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */

#define CONFIG_SYS_FLASH0		0xFE000000
#define CONFIG_SYS_FLASH1		0xFC000000
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }

#define CONFIG_SYS_LBC_FLASH_BASE	CONFIG_SYS_FLASH1	/* Localbus flash start	*/
#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH	*/

#define CONFIG_SYS_BR0_PRELIM		0xfe001001	/* port size 16bit	*/
#define CONFIG_SYS_OR0_PRELIM		0xfe000030	/* 32MB Flash		*/
#define CONFIG_SYS_BR1_PRELIM		0xfc001001	/* port size 16bit	*/
#define CONFIG_SYS_OR1_PRELIM		0xfe000030	/* 32MB Flash		*/

#define CONFIG_SYS_FLASH_CFI				/* flash is CFI compat.	*/
#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver*/

#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks	*/
#define CONFIG_SYS_MAX_FLASH_SECT	256		/* sectors per device	*/
#undef	CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/

#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/

#define CONFIG_SYS_LBC_LCRR		0x00030004    /* LB clock ratio reg	*/
#define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg		*/
#define CONFIG_SYS_LBC_LSRT		0x20000000    /* LB sdram refresh timer	*/
#define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer presc.*/

#define CONFIG_SYS_INIT_RAM_LOCK	1
#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address	*/
#define CONFIG_SYS_INIT_RAM_END	0x4000		/* End used area in RAM	*/

#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data*/
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384KiB for Mon */
#define CONFIG_SYS_MALLOC_LEN		(4 << 20)	/* Reserve 4 MB for malloc */

/* FPGA and NAND */
#define CONFIG_SYS_FPGA_BASE		0xc0000000
#define CONFIG_SYS_FPGA_SIZE		0x00100000	/* 1 MB		*/
#define CONFIG_SYS_HMI_BASE		0xc0010000
#define CONFIG_SYS_BR3_PRELIM		0xc0001881	/* UPMA, 32-bit */
#define CONFIG_SYS_OR3_PRELIM		0xfff00000	/* 1 MB 	*/

#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_FPGA_BASE + 0x70)
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_CMD_NAND

/* LIME GDC */
#define CONFIG_SYS_LIME_BASE		0xc8000000
#define CONFIG_SYS_LIME_SIZE		0x04000000	/* 64 MB	*/
#define CONFIG_SYS_BR2_PRELIM		0xc80018a1	/* UPMB, 32-bit	*/
#define CONFIG_SYS_OR2_PRELIM		0xfc000000	/* 64 MB	*/

#define CONFIG_VIDEO
#define CONFIG_VIDEO_MB862xx
#define CONFIG_VIDEO_MB862xx_ACCEL
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define VIDEO_FB_16BPP_WORD_SWAP
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)	/* decompressed img */

/* SDRAM Clock frequency, 100MHz (0x0000) or 133MHz (0x10000) */
#define CONFIG_SYS_MB862xx_CCF		0x10000
/* SDRAM parameter */
#define CONFIG_SYS_MB862xx_MMR		0x4157BA63

/* Serial Port */

#define CONFIG_CONS_INDEX     1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)

#define CONFIG_BAUDRATE         115200

#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support */
#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
#ifdef	CONFIG_SYS_HUSH_PARSER
#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#endif


/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C			/* I2C with hardware support	*/
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
#define CONFIG_SYS_I2C_SPEED		102124	/* I2C speed and slave address	*/
#define CONFIG_SYS_I2C_SLAVE		0x7F
#define CONFIG_SYS_I2C_OFFSET		0x3000

#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C2_OFFSET		0x3100

/* I2C RTC */
#define CONFIG_RTC_RX8025		/* Use Epson rx8025 rtc via i2c	*/
#define CONFIG_SYS_I2C_RTC_ADDR	0x32	/* at address 0x32		*/

/* I2C W83782G HW-Monitoring IC */
#define CONFIG_SYS_I2C_W83782G_ADDR	0x28	/* W83782G address 		*/

/* I2C temp sensor */
/* Socrates uses Maxim's	DS75, which is compatible with LM75 */
#define CONFIG_DTT_LM75		1
#define CONFIG_DTT_SENSORS	{4}		/* Sensor addresses	*/
#define CONFIG_SYS_DTT_MAX_TEMP	125
#define CONFIG_SYS_DTT_LOW_TEMP	-55
#define CONFIG_SYS_DTT_HYSTERESIS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4

/*
 * General PCI
 * Memory space is mapped 1-1.
 */
#define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */

/* PCI is clocked by the external source at 33 MHz */
#define CONFIG_PCI_CLK_FREQ	33000000
#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M			*/
#define CONFIG_SYS_PCI1_IO_BASE	0xE2000000
#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000	/* 16M			*/

#if defined(CONFIG_PCI)
#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
#endif	/* CONFIG_PCI */


#define CONFIG_NET_MULTI	1
#define CONFIG_MII		1	/* MII PHY management */
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"TSEC0"
#define CONFIG_TSEC3	1
#define CONFIG_TSEC3_NAME	"TSEC1"
#undef CONFIG_MPC85XX_FEC

#define TSEC1_PHY_ADDR		0
#define TSEC3_PHY_ADDR		1

#define TSEC1_PHYIDX		0
#define TSEC3_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC3_FLAGS		TSEC_GIGABIT

/* Options are: TSEC[0,1] */
#define CONFIG_ETHPRIME		"TSEC0"
#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */

#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1

/*
 * Environment
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env	*/
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE		0x4000
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define	CONFIG_TIMESTAMP		/* Print image info with ts	*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_BMP
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DTT
#undef CONFIG_CMD_EEPROM
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_I2C
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_MII
#undef CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_USB
#define CONFIG_CMD_REGINFO

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif

#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/

#if defined(CONFIG_CMD_KGDB)
    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif

#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size	*/
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot		*/

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
#endif


#define CONFIG_LOADADDR	 200000		/* default addr for tftp & bootm*/

#define CONFIG_BOOTDELAY 1		/* -1 disables auto-boot	*/

#define CONFIG_PREBOOT	"echo;"	\
	"echo Welcome on the ABB Socrates Board;" \
	"echo"

#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"consdev=ttyS0\0"						\
	"uboot_file=/home/tftp/syscon3/u-boot.bin\0"			\
	"bootfile=/home/tftp/syscon3/uImage\0"				\
	"fdt_file=/home/tftp/syscon3/socrates.dtb\0"			\
	"initrd_file=/home/tftp/syscon3/uinitrd.gz\0"			\
	"uboot_addr=FFFA0000\0"						\
	"kernel_addr=FE000000\0"					\
	"fdt_addr=FE1E0000\0"						\
	"ramdisk_addr=FE200000\0"					\
	"fdt_addr_r=B00000\0"						\
	"kernel_addr_r=200000\0"					\
	"ramdisk_addr_r=400000\0"					\
	"rootpath=/opt/eldk/ppc_85xxDP\0"				\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=$serverip:$rootpath\0"				\
	"addcons=setenv bootargs $bootargs "				\
		"console=$consdev,$baudrate\0"				\
	"addip=setenv bootargs $bootargs "				\
		"ip=$ipaddr:$serverip:$gatewayip:$netmask"		\
		":$hostname:$netdev:off panic=1\0"			\
	"boot_nor=run ramargs addcons;"					\
		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"tftp ${fdt_addr_r} ${fdt_file}; "			\
		"run nfsargs addip addcons;"				\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"update_uboot=tftp 100000 ${uboot_file};"			\
		"protect off fffa0000 ffffffff;"			\
		"era fffa0000 ffffffff;"				\
		"cp.b 100000 fffa0000 ${filesize};"			\
		"setenv filesize;saveenv\0"				\
	"update_kernel=tftp 100000 ${bootfile};"			\
		"era fe000000 fe1dffff;"				\
		"cp.b 100000 fe000000 ${filesize};"			\
		"setenv filesize;saveenv\0"				\
	"update_fdt=tftp 100000 ${fdt_file};" 				\
		"era fe1e0000 fe1fffff;"				\
		"cp.b 100000 fe1e0000 ${filesize};"			\
		"setenv filesize;saveenv\0"				\
	"update_initrd=tftp 100000 ${initrd_file};" 			\
		"era fe200000 fe9fffff;"				\
		"cp.b 100000 fe200000 ${filesize};"			\
		"setenv filesize;saveenv\0"				\
	"clean_data=era fea00000 fff5ffff\0"				\
	"usbargs=setenv bootargs root=/dev/sda1 rw\0" 			\
	"load_usb=usb start;" 						\
		"ext2load usb 0:1 ${kernel_addr_r} /boot/uImage\0"	\
	"boot_usb=run load_usb usbargs addcons;"			\
		"bootm ${kernel_addr_r} - ${fdt_addr};"			\
		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
	""
#define CONFIG_BOOTCOMMAND	"run boot_nor"

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT	1
#define CONFIG_OF_BOARD_SETUP	1

/* USB support */
#define CONFIG_USB_OHCI_NEW		1
#define CONFIG_PCI_OHCI			1
#define CONFIG_PCI_OHCI_DEVNO		3 /* Number in PCI list */
#define CONFIG_PCI_EHCI_DEVNO		(CONFIG_PCI_OHCI_DEVNO / 2)
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ohci_pci"
#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	1
#define CONFIG_DOS_PARTITION		1
#define CONFIG_USB_STORAGE		1

#endif	/* __CONFIG_H */
Commit	Line	Data
5d108ac8 SP	1	/*
	2	* (C) Copyright 2008
	3	* Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
	4	*
	5	* Wolfgang Denk <wd@denx.de>
	6	* Copyright 2004 Freescale Semiconductor.
	7	* (C) Copyright 2002,2003 Motorola,Inc.
	8	* Xianghua Xiao <X.Xiao@motorola.com>
	9	*
	10	* See file CREDITS for list of people who contributed to this
	11	* project.
	12	*
	13	* This program is free software; you can redistribute it and/or
	14	* modify it under the terms of the GNU General Public License as
	15	* published by the Free Software Foundation; either version 2 of
	16	* the License, or (at your option) any later version.
	17	*
	18	* This program is distributed in the hope that it will be useful,
	19	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	20	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	21	* GNU General Public License for more details.
	22	*
	23	* You should have received a copy of the GNU General Public License
	24	* along with this program; if not, write to the Free Software
	25	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	26	* MA 02111-1307 USA
	27	*/
	28
	29	/*
	30	* Socrates
	31	*/
	32
	33	#ifndef __CONFIG_H
	34	#define __CONFIG_H
	35
e99b607a	36	/* new uImage format support */
	37	#define CONFIG_FIT 1
	38	#define CONFIG_OF_LIBFDT 1
	39	#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
	40
5d108ac8 SP	41	/* High Level Configuration Options */
	42	#define CONFIG_BOOKE 1 /* BOOKE */
	43	#define CONFIG_E500 1 /* BOOKE e500 family */
	44	#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
	45	#define CONFIG_MPC8544 1
	46	#define CONFIG_SOCRATES 1
	47
	48	#define CONFIG_PCI
	49
	50	#define CONFIG_TSEC_ENET /* tsec ethernet support */
	51
	52	#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
3e79b588	53	#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
5d108ac8 SP	54
	55	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
	56
	57	/*
	58	* Only possible on E500 Version 2 or newer cores.
	59	*/
	60	#define CONFIG_ENABLE_36BIT_PHYS 1
	61
	62	/*
	63	* sysclk for MPC85xx
	64	*
	65	* Two valid values are:
	66	* 33000000
	67	* 66000000
	68	*
	69	* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
	70	* is likely the desired value here, so that is now the default.
	71	* The board, however, can run at 66MHz. In any event, this value
	72	* must match the settings of some switches. Details can be found
	73	* in the README.mpc85xxads.
	74	*/
	75
	76	#ifndef CONFIG_SYS_CLK_FREQ
	77	#define CONFIG_SYS_CLK_FREQ 66666666
	78	#endif
	79
	80	/*
	81	* These can be toggled for performance analysis, otherwise use default.
	82	*/
	83	#define CONFIG_L2_CACHE /* toggle L2 cache */
	84	#define CONFIG_BTB /* toggle branch predition */
5d108ac8	85
6d0f6bcf	86	#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
5d108ac8	87
6d0f6bcf JCPV	88	#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
	89	#define CONFIG_SYS_MEMTEST_START 0x00400000
	90	#define CONFIG_SYS_MEMTEST_END 0x00C00000
5d108ac8 SP	91
	92	/*
	93	* Base addresses -- Note these are effective addresses where the
	94	* actual resources get mapped (not physical addresses)
	95	*/
6d0f6bcf JCPV	96	#define CONFIG_SYS_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */
	97	#define CONFIG_SYS_CCSRBAR 0xE0000000 /* relocated CCSRBAR */
	98	#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
	99	#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
5d108ac8	100
be0bd823 KG	101	/* DDR Setup */
	102	#define CONFIG_FSL_DDR2
	103	#undef CONFIG_FSL_DDR_INTERACTIVE
	104	#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
	105	#define CONFIG_DDR_SPD
	106
	107	#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
	108	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	109
6d0f6bcf JCPV	110	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
6d0f6bcf JCPV	111	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
be0bd823 KG	112	#define CONFIG_VERY_BIG_RAM
	113
	114	#define CONFIG_NUM_DDR_CONTROLLERS 1
	115	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	116	#define CONFIG_CHIP_SELECTS_PER_CTRL 2
	117
	118	/* I2C addresses of SPD EEPROMs */
562788b0	119	#define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */
5d108ac8 SP	120
	121	#define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */
	122
	123	/* Hardcoded values, to use instead of SPD */
6d0f6bcf JCPV	124	#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f
	125	#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102
	126	#define CONFIG_SYS_DDR_TIMING_0 0x00260802
	127	#define CONFIG_SYS_DDR_TIMING_1 0x3935D322
	128	#define CONFIG_SYS_DDR_TIMING_2 0x14904CC8
	129	#define CONFIG_SYS_DDR_MODE 0x00480432
	130	#define CONFIG_SYS_DDR_INTERVAL 0x030C0100
	131	#define CONFIG_SYS_DDR_CONFIG_2 0x04400000
	132	#define CONFIG_SYS_DDR_CONFIG 0xC3008000
	133	#define CONFIG_SYS_DDR_CLK_CONTROL 0x03800000
	134	#define CONFIG_SYS_SDRAM_SIZE 256 /* in Megs */
5d108ac8	135
5d108ac8 SP	136	/*
	137	* Flash on the LocalBus
	138	*/
6d0f6bcf	139	#define CONFIG_SYS_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
5d108ac8	140
6d0f6bcf JCPV	141	#define CONFIG_SYS_FLASH0 0xFE000000
	142	#define CONFIG_SYS_FLASH1 0xFC000000
	143	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
5d108ac8	144
6d0f6bcf JCPV	145	#define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */
6d0f6bcf JCPV	146	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */
5d108ac8	147
6d0f6bcf JCPV	148	#define CONFIG_SYS_BR0_PRELIM 0xfe001001 /* port size 16bit */
	149	#define CONFIG_SYS_OR0_PRELIM 0xfe000030 /* 32MB Flash */
	150	#define CONFIG_SYS_BR1_PRELIM 0xfc001001 /* port size 16bit */
	151	#define CONFIG_SYS_OR1_PRELIM 0xfe000030 /* 32MB Flash */
5d108ac8	152
6d0f6bcf	153	#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */
00b1883a	154	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver*/
5d108ac8	155
6d0f6bcf JCPV	156	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
	157	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */
	158	#undef CONFIG_SYS_FLASH_CHECKSUM
	159	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	160	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
5d108ac8	161
6d0f6bcf	162	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
5d108ac8	163
6d0f6bcf JCPV	164	#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
	165	#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
	166	#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
	167	#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/
5d108ac8	168
6d0f6bcf JCPV	169	#define CONFIG_SYS_INIT_RAM_LOCK 1
	170	#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
	171	#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End used area in RAM */
5d108ac8	172
6d0f6bcf JCPV	173	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data*/
	174	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	175	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
5d108ac8	176
47106ce1	177	#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384KiB for Mon */
6d0f6bcf	178	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4 MB for malloc */
3e79b588 DZ	179
3e79b588 DZ	180	/* FPGA and NAND */
6d0f6bcf JCPV	181	#define CONFIG_SYS_FPGA_BASE 0xc0000000
	182	#define CONFIG_SYS_FPGA_SIZE 0x00100000 /* 1 MB */
	183	#define CONFIG_SYS_HMI_BASE 0xc0010000
	184	#define CONFIG_SYS_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */
	185	#define CONFIG_SYS_OR3_PRELIM 0xfff00000 /* 1 MB */
	186
	187	#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_FPGA_BASE + 0x70)
	188	#define CONFIG_SYS_MAX_NAND_DEVICE 1
3e79b588	189	#define CONFIG_CMD_NAND
5d108ac8	190
e64987a8	191	/* LIME GDC */
6d0f6bcf JCPV	192	#define CONFIG_SYS_LIME_BASE 0xc8000000
	193	#define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */
	194	#define CONFIG_SYS_BR2_PRELIM 0xc80018a1 /* UPMB, 32-bit */
	195	#define CONFIG_SYS_OR2_PRELIM 0xfc000000 /* 64 MB */
e64987a8 AG	196
	197	#define CONFIG_VIDEO
	198	#define CONFIG_VIDEO_MB862xx
5d16ca87	199	#define CONFIG_VIDEO_MB862xx_ACCEL
e64987a8 AG	200	#define CONFIG_CFB_CONSOLE
	201	#define CONFIG_VIDEO_LOGO
	202	#define CONFIG_VIDEO_BMP_LOGO
	203	#define CONFIG_CONSOLE_EXTRA_INFO
	204	#define VIDEO_FB_16BPP_PIXEL_SWAP
229b6dce	205	#define VIDEO_FB_16BPP_WORD_SWAP
e64987a8	206	#define CONFIG_VGA_AS_SINGLE_DEVICE
6d0f6bcf	207	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
e64987a8 AG	208	#define CONFIG_VIDEO_SW_CURSOR
	209	#define CONFIG_SPLASH_SCREEN
	210	#define CONFIG_VIDEO_BMP_GZIP
6d0f6bcf	211	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
e64987a8	212
c28d3bbe WG	213	/* SDRAM Clock frequency, 100MHz (0x0000) or 133MHz (0x10000) */
	214	#define CONFIG_SYS_MB862xx_CCF 0x10000
	215	/* SDRAM parameter */
	216	#define CONFIG_SYS_MB862xx_MMR 0x4157BA63
	217
5d108ac8 SP	218	/* Serial Port */
	219
	220	#define CONFIG_CONS_INDEX 1
6d0f6bcf JCPV	221	#define CONFIG_SYS_NS16550
	222	#define CONFIG_SYS_NS16550_SERIAL
	223	#define CONFIG_SYS_NS16550_REG_SIZE 1
	224	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
5d108ac8	225
6d0f6bcf JCPV	226	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
6d0f6bcf JCPV	227	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
5d108ac8 SP	228
	229	#define CONFIG_BAUDRATE 115200
	230
6d0f6bcf	231	#define CONFIG_SYS_BAUDRATE_TABLE \
5d108ac8 SP	232	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
	233
	234	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
5be58f5f	235	#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
6d0f6bcf JCPV	236	#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
	237	#ifdef CONFIG_SYS_HUSH_PARSER
	238	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
5d108ac8 SP	239	#endif
	240
	241
	242	/*
	243	* I2C
	244	*/
	245	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	246	#define CONFIG_HARD_I2C /* I2C with hardware support */
	247	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
6d0f6bcf JCPV	248	#define CONFIG_SYS_I2C_SPEED 102124 /* I2C speed and slave address */
	249	#define CONFIG_SYS_I2C_SLAVE 0x7F
	250	#define CONFIG_SYS_I2C_OFFSET 0x3000
5d108ac8	251
3e79b588	252	#define CONFIG_I2C_MULTI_BUS
6d0f6bcf	253	#define CONFIG_SYS_I2C2_OFFSET 0x3100
3e79b588	254
5d108ac8	255	/* I2C RTC */
e18575d5	256	#define CONFIG_RTC_RX8025 /* Use Epson rx8025 rtc via i2c */
6d0f6bcf	257	#define CONFIG_SYS_I2C_RTC_ADDR 0x32 /* at address 0x32 */
5d108ac8	258
e64987a8	259	/* I2C W83782G HW-Monitoring IC */
6d0f6bcf	260	#define CONFIG_SYS_I2C_W83782G_ADDR 0x28 /* W83782G address */
e64987a8	261
2f7468ae SP	262	/* I2C temp sensor */
	263	/* Socrates uses Maxim's DS75, which is compatible with LM75 */
	264	#define CONFIG_DTT_LM75 1
	265	#define CONFIG_DTT_SENSORS {4} /* Sensor addresses */
6d0f6bcf JCPV	266	#define CONFIG_SYS_DTT_MAX_TEMP 125
	267	#define CONFIG_SYS_DTT_LOW_TEMP -55
	268	#define CONFIG_SYS_DTT_HYSTERESIS 3
	269	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
2f7468ae	270
5d108ac8 SP	271	/*
	272	* General PCI
	273	* Memory space is mapped 1-1.
	274	*/
6d0f6bcf	275	#define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */
5d108ac8	276
5e1882df SP	277	/* PCI is clocked by the external source at 33 MHz */
5e1882df SP	278	#define CONFIG_PCI_CLK_FREQ 33000000
6d0f6bcf JCPV	279	#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
	280	#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
	281	#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
	282	#define CONFIG_SYS_PCI1_IO_BASE 0xE2000000
	283	#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
	284	#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */
5d108ac8 SP	285
5d108ac8 SP	286	#if defined(CONFIG_PCI)
5d108ac8	287	#define CONFIG_PCI_PNP /* do pci plug-and-play */
d39e6851	288	#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
5d108ac8 SP	289	#endif /* CONFIG_PCI */
	290
	291
	292	#define CONFIG_NET_MULTI 1
	293	#define CONFIG_MII 1 /* MII PHY management */
	294	#define CONFIG_TSEC1 1
	295	#define CONFIG_TSEC1_NAME "TSEC0"
2f845dc2 SP	296	#define CONFIG_TSEC3 1
2f845dc2 SP	297	#define CONFIG_TSEC3_NAME "TSEC1"
5d108ac8 SP	298	#undef CONFIG_MPC85XX_FEC
	299
	300	#define TSEC1_PHY_ADDR 0
2f845dc2	301	#define TSEC3_PHY_ADDR 1
5d108ac8 SP	302
5d108ac8 SP	303	#define TSEC1_PHYIDX 0
2f845dc2	304	#define TSEC3_PHYIDX 0
5d108ac8	305	#define TSEC1_FLAGS TSEC_GIGABIT
2f845dc2	306	#define TSEC3_FLAGS TSEC_GIGABIT
5d108ac8	307
2f845dc2	308	/* Options are: TSEC[0,1] */
5d108ac8 SP	309	#define CONFIG_ETHPRIME "TSEC0"
	310	#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
	311
e18575d5 SP	312	#define CONFIG_HAS_ETH0
	313	#define CONFIG_HAS_ETH1
	314
5d108ac8 SP	315	/*
	316	* Environment
	317	*/
5a1aceb0	318	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586	319	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
6d0f6bcf	320	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
0e8d1586 JCPV	321	#define CONFIG_ENV_SIZE 0x4000
	322	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
	323	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
5d108ac8 SP	324
5d108ac8 SP	325	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	326	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
5d108ac8 SP	327
	328	#define CONFIG_TIMESTAMP /* Print image info with ts */
	329
	330
	331	/*
	332	* BOOTP options
	333	*/
	334	#define CONFIG_BOOTP_BOOTFILESIZE
	335	#define CONFIG_BOOTP_BOOTPATH
	336	#define CONFIG_BOOTP_GATEWAY
	337	#define CONFIG_BOOTP_HOSTNAME
	338
	339
	340	/*
	341	* Command line configuration.
	342	*/
	343	#include <config_cmd_default.h>
	344
47106ce1	345	#define CONFIG_CMD_BMP
5d108ac8 SP	346	#define CONFIG_CMD_DATE
5d108ac8 SP	347	#define CONFIG_CMD_DHCP
2f7468ae	348	#define CONFIG_CMD_DTT
5d108ac8	349	#undef CONFIG_CMD_EEPROM
47106ce1	350	#define CONFIG_CMD_EXT2 /* EXT2 Support */
5d108ac8	351	#define CONFIG_CMD_I2C
3e79b588	352	#define CONFIG_CMD_SDRAM
5d108ac8	353	#define CONFIG_CMD_MII
47106ce1	354	#undef CONFIG_CMD_NFS
5d108ac8	355	#define CONFIG_CMD_PING
5d108ac8	356	#define CONFIG_CMD_SNTP
791e1dba	357	#define CONFIG_CMD_USB
199e262e	358	#define CONFIG_CMD_REGINFO
5d108ac8 SP	359
	360	#if defined(CONFIG_PCI)
	361	#define CONFIG_CMD_PCI
	362	#endif
	363
5d108ac8 SP	364	#undef CONFIG_WATCHDOG /* watchdog disabled */
	365
	366	/*
	367	* Miscellaneous configurable options
	368	*/
6d0f6bcf JCPV	369	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	370	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
	371	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
5d108ac8 SP	372
5d108ac8 SP	373	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	374	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
5d108ac8	375	#else
6d0f6bcf	376	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
5d108ac8 SP	377	#endif
5d108ac8 SP	378
6d0f6bcf JCPV	379	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size */
	380	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	381	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	382	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
5d108ac8 SP	383
	384	/*
	385	* For booting Linux, the board info and command line data
	386	* have to be in the first 8 MB of memory, since this is
	387	* the maximum mapped by the Linux kernel during initialization.
	388	*/
6d0f6bcf	389	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
5d108ac8 SP	390
	391	/*
	392	* Internal Definitions
	393	*
	394	* Boot Flags
	395	*/
	396	#define BOOTFLAG_COLD 0x01 /* Power-On: Boot from FLASH */
	397	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	398
	399	#if defined(CONFIG_CMD_KGDB)
	400	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
	401	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	402	#endif
	403
	404
	405	#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/
	406
3e79b588	407	#define CONFIG_BOOTDELAY 1 /* -1 disables auto-boot */
5d108ac8 SP	408
5d108ac8 SP	409	#define CONFIG_PREBOOT "echo;" \
3e79b588	410	"echo Welcome on the ABB Socrates Board;" \
5d108ac8 SP	411	"echo"
	412
	413	#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
	414
	415	#define CONFIG_EXTRA_ENV_SETTINGS \
5d108ac8 SP	416	"netdev=eth0\0" \
5d108ac8 SP	417	"consdev=ttyS0\0" \
3e79b588 DZ	418	"uboot_file=/home/tftp/syscon3/u-boot.bin\0" \
	419	"bootfile=/home/tftp/syscon3/uImage\0" \
	420	"fdt_file=/home/tftp/syscon3/socrates.dtb\0" \
	421	"initrd_file=/home/tftp/syscon3/uinitrd.gz\0" \
	422	"uboot_addr=FFFA0000\0" \
	423	"kernel_addr=FE000000\0" \
	424	"fdt_addr=FE1E0000\0" \
	425	"ramdisk_addr=FE200000\0" \
	426	"fdt_addr_r=B00000\0" \
	427	"kernel_addr_r=200000\0" \
	428	"ramdisk_addr_r=400000\0" \
	429	"rootpath=/opt/eldk/ppc_85xxDP\0" \
	430	"ramargs=setenv bootargs root=/dev/ram rw\0" \
5d108ac8 SP	431	"nfsargs=setenv bootargs root=/dev/nfs rw " \
5d108ac8 SP	432	"nfsroot=$serverip:$rootpath\0" \
3e79b588 DZ	433	"addcons=setenv bootargs $bootargs " \
3e79b588 DZ	434	"console=$consdev,$baudrate\0" \
5d108ac8 SP	435	"addip=setenv bootargs $bootargs " \
	436	"ip=$ipaddr:$serverip:$gatewayip:$netmask" \
	437	":$hostname:$netdev:off panic=1\0" \
3e79b588	438	"boot_nor=run ramargs addcons;" \
e18575d5	439	"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
e18575d5 SP	440	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	441	"tftp ${fdt_addr_r} ${fdt_file}; " \
	442	"run nfsargs addip addcons;" \
	443	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
3e79b588 DZ	444	"update_uboot=tftp 100000 ${uboot_file};" \
	445	"protect off fffa0000 ffffffff;" \
	446	"era fffa0000 ffffffff;" \
	447	"cp.b 100000 fffa0000 ${filesize};" \
	448	"setenv filesize;saveenv\0" \
	449	"update_kernel=tftp 100000 ${bootfile};" \
	450	"era fe000000 fe1dffff;" \
	451	"cp.b 100000 fe000000 ${filesize};" \
5d108ac8	452	"setenv filesize;saveenv\0" \
3e79b588 DZ	453	"update_fdt=tftp 100000 ${fdt_file};" \
	454	"era fe1e0000 fe1fffff;" \
	455	"cp.b 100000 fe1e0000 ${filesize};" \
	456	"setenv filesize;saveenv\0" \
	457	"update_initrd=tftp 100000 ${initrd_file};" \
	458	"era fe200000 fe9fffff;" \
	459	"cp.b 100000 fe200000 ${filesize};" \
	460	"setenv filesize;saveenv\0" \
	461	"clean_data=era fea00000 fff5ffff\0" \
	462	"usbargs=setenv bootargs root=/dev/sda1 rw\0" \
	463	"load_usb=usb start;" \
	464	"ext2load usb 0:1 ${kernel_addr_r} /boot/uImage\0" \
	465	"boot_usb=run load_usb usbargs addcons;" \
	466	"bootm ${kernel_addr_r} - ${fdt_addr};" \
	467	"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
5d108ac8	468	""
3e79b588	469	#define CONFIG_BOOTCOMMAND "run boot_nor"
5d108ac8	470
e18575d5 SP	471	/* pass open firmware flat tree */
	472	#define CONFIG_OF_LIBFDT 1
	473	#define CONFIG_OF_BOARD_SETUP 1
	474
791e1dba SP	475	/* USB support */
	476	#define CONFIG_USB_OHCI_NEW 1
	477	#define CONFIG_PCI_OHCI 1
	478	#define CONFIG_PCI_OHCI_DEVNO 3 /* Number in PCI list */
e90fb6af	479	#define CONFIG_PCI_EHCI_DEVNO (CONFIG_PCI_OHCI_DEVNO / 2)
6d0f6bcf JCPV	480	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
	481	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci"
	482	#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
791e1dba SP	483	#define CONFIG_DOS_PARTITION 1
	484	#define CONFIG_USB_STORAGE 1
	485
5d108ac8	486	#endif /* __CONFIG_H */