]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/trimslice.h
tegra: Compulab TrimSlice board support
[people/ms/u-boot.git] / include / configs / trimslice.h
CommitLineData
39e37118
SW
1/*
2 * (C) Copyright 2010-2012
3 * NVIDIA Corporation <www.nvidia.com>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#ifndef __CONFIG_H
25#define __CONFIG_H
26
27#include <asm/sizes.h>
28#include "tegra2-common.h"
29
30/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */
31#define CONFIG_DEFAULT_DEVICE_TREE tegra2-trimslice
32#define CONFIG_OF_CONTROL
33#define CONFIG_OF_SEPARATE
34
35/* High-level configuration options */
36#define V_PROMPT "Tegra2 (TrimSlice) # "
37#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Trimslice"
38
39/* Board-specific serial config */
40#define CONFIG_SERIAL_MULTI
41#define CONFIG_TEGRA2_ENABLE_UARTA
42#define CONFIG_TEGRA2_UARTA_GPU
43#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
44
45#define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE
46#define CONFIG_SYS_BOARD_ODMDATA 0x300c0011 /* lp?, 1GB, UARTA */
47
48#define CONFIG_BOARD_EARLY_INIT_F
49
50/* I2C */
51#define CONFIG_TEGRA_I2C
52#define CONFIG_SYS_I2C_INIT_BOARD
53#define CONFIG_I2C_MULTI_BUS
54#define CONFIG_SYS_MAX_I2C_BUS 4
55#define CONFIG_SYS_I2C_SPEED 100000
56#define CONFIG_CMD_I2C
57
58/* SD/MMC */
59#define CONFIG_MMC
60#define CONFIG_GENERIC_MMC
61#define CONFIG_TEGRA2_MMC
62#define CONFIG_CMD_MMC
63
64#define CONFIG_DOS_PARTITION
65#define CONFIG_EFI_PARTITION
66#define CONFIG_CMD_EXT2
67#define CONFIG_CMD_FAT
68
69/* Environment not stored */
70#define CONFIG_ENV_IS_NOWHERE
71
72/* USB Host support */
73#define CONFIG_USB_EHCI
74#define CONFIG_USB_EHCI_TEGRA
75#define CONFIG_USB_STORAGE
76#define CONFIG_CMD_USB
77
78/* USB networking support */
79#define CONFIG_USB_HOST_ETHER
80#define CONFIG_USB_ETHER_SMSC95XX
81#define CONFIG_USB_ETHER_ASIX
82
83/* General networking support */
84#define CONFIG_CMD_NET
85#define CONFIG_CMD_DHCP
86
87#include "tegra2-common-post.h"
88
89#endif /* __CONFIG_H */