projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| c2e49f70 RA |
1 | /* |
| 2 | * esd vme8349 U-Boot configuration file | |
| 3 | * Copyright (c) 2008, 2009 esd gmbh Hannover Germany | |
| 4 | * | |
| 5 | * (C) Copyright 2006 | |
| 6 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| 7 | * | |
| 8 | * reinhard.arlt@esd-electronics.de | |
| 9 | * Based on the MPC8349EMDS config. | |
| 10 | * | |
| 11 | * See file CREDITS for list of people who contributed to this | |
| 12 | * project. | |
| 13 | * | |
| 14 | * This program is free software; you can redistribute it and/or | |
| 15 | * modify it under the terms of the GNU General Public License as | |
| 16 | * published by the Free Software Foundation; either version 2 of | |
| 17 | * the License, or (at your option) any later version. | |
| 18 | * | |
| 19 | * This program is distributed in the hope that it will be useful, | |
| 20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 22 | * GNU General Public License for more details. | |
| 23 | * | |
| 24 | * You should have received a copy of the GNU General Public License | |
| 25 | * along with this program; if not, write to the Free Software | |
| 26 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 27 | * MA 02111-1307 USA | |
| 28 | */ | |
| 29 | ||
| 30 | /* | |
| 31 | * vme8349 board configuration file. | |
| 32 | */ | |
| 33 | ||
| 34 | #ifndef __CONFIG_H | |
| 35 | #define __CONFIG_H | |
| 36 | ||
| 1dee9be6 RA |
37 | /* |
| 38 | * Top level Makefile configuration choices | |
| 39 | */ | |
| 40 | #ifdef CONFIG_MK_caddy2 | |
| 41 | #define VME_CADDY2 | |
| 42 | #endif | |
| 43 | ||
| c2e49f70 RA |
44 | /* |
| 45 | * High Level Configuration Options | |
| 46 | */ | |
| 47 | #define CONFIG_E300 1 /* E300 Family */ | |
| 48 | #define CONFIG_MPC83xx 1 /* MPC83xx family */ | |
| 49 | #define CONFIG_MPC834x 1 /* MPC834x family */ | |
| 50 | #define CONFIG_MPC8349 1 /* MPC8349 specific */ | |
| 51 | #define CONFIG_VME8349 1 /* ESD VME8349 board specific */ | |
| 52 | ||
| 1dee9be6 RA |
53 | #define CONFIG_MISC_INIT_R |
| 54 | ||
| c2e49f70 RA |
55 | #define CONFIG_PCI |
| 56 | /* Don't enable PCI2 on vme834x - it doesn't exist physically. */ | |
| 57 | #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ | |
| 58 | ||
| 59 | #define PCI_66M | |
| 60 | #ifdef PCI_66M | |
| 61 | #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ | |
| 62 | #else | |
| 63 | #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ | |
| 64 | #endif | |
| 65 | ||
| 66 | #ifndef CONFIG_SYS_CLK_FREQ | |
| 67 | #ifdef PCI_66M | |
| 68 | #define CONFIG_SYS_CLK_FREQ 66000000 | |
| 69 | #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 | |
| 70 | #else | |
| 71 | #define CONFIG_SYS_CLK_FREQ 33000000 | |
| 72 | #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 | |
| 73 | #endif | |
| 74 | #endif | |
| 75 | ||
| 76 | #define CONFIG_SYS_IMMR 0xE0000000 | |
| 77 | ||
| 78 | #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ | |
| 79 | #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ | |
| 80 | #define CONFIG_SYS_MEMTEST_END 0x00100000 | |
| 81 | ||
| 82 | /* | |
| 83 | * DDR Setup | |
| 84 | */ | |
| 85 | #define CONFIG_DDR_ECC /* only for ECC DDR module */ | |
| 86 | #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ | |
| 1dee9be6 RA |
87 | #define CONFIG_SPD_EEPROM |
| 88 | #define SPD_EEPROM_ADDRESS 0x54 | |
| 89 | #define CONFIG_SYS_READ_SPD vme8349_read_spd | |
| c2e49f70 RA |
90 | #define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */ |
| 91 | ||
| 92 | /* | |
| 93 | * 32-bit data path mode. | |
| 94 | * | |
| 95 | * Please note that using this mode for devices with the real density of 64-bit | |
| 96 | * effectively reduces the amount of available memory due to the effect of | |
| 97 | * wrapping around while translating address to row/columns, for example in the | |
| 98 | * 256MB module the upper 128MB get aliased with contents of the lower | |
| 99 | * 128MB); normally this define should be used for devices with real 32-bit | |
| 100 | * data path. | |
| 101 | */ | |
| 102 | #undef CONFIG_DDR_32BIT | |
| 103 | ||
| 104 | #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/ | |
| 105 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE | |
| 106 | #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE | |
| 107 | #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ | |
| 108 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) | |
| 109 | #define CONFIG_DDR_2T_TIMING | |
| 1dee9be6 | 110 | #define CONFIG_SYS_DDRCDR 0x80080001 |
| c2e49f70 RA |
111 | |
| 112 | /* | |
| 113 | * FLASH on the Local Bus | |
| 114 | */ | |
| 115 | #define CONFIG_SYS_FLASH_CFI | |
| 116 | #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ | |
| 1dee9be6 RA |
117 | #ifdef VME_CADDY2 |
| 118 | #define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ | |
| 119 | #define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ | |
| 120 | #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ | |
| 4e7e12df | 121 | (2 << BR_PS_SHIFT) | /* 16bit */ \ |
| 1dee9be6 | 122 | BR_V) /* valid */ |
| c2e49f70 | 123 | |
| 1dee9be6 RA |
124 | #define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */ |
| 125 | #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE | |
| 126 | #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */ | |
| 127 | #else | |
| 128 | #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ | |
| 129 | #define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ | |
| c2e49f70 | 130 | #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ |
| 4e7e12df | 131 | (2 << BR_PS_SHIFT) | /* 16bit */ \ |
| c2e49f70 RA |
132 | BR_V) /* valid */ |
| 133 | ||
| 1dee9be6 | 134 | #define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */ |
| c2e49f70 | 135 | #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE |
| 1dee9be6 RA |
136 | #define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */ |
| 137 | #endif | |
| 138 | /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ | |
| c2e49f70 RA |
139 | |
| 140 | #define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801) | |
| 1dee9be6 | 141 | #define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200) |
| c2e49f70 | 142 | #define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000 |
| 1dee9be6 | 143 | #define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011) |
| c2e49f70 RA |
144 | |
| 145 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
| 146 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ | |
| 147 | ||
| 148 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
| 149 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */ | |
| 150 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */ | |
| 151 | ||
| c2e49f70 RA |
152 | #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ |
| 153 | ||
| 154 | #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) | |
| 155 | #define CONFIG_SYS_RAMBOOT | |
| 156 | #else | |
| 1dee9be6 | 157 | #undef CONFIG_SYS_RAMBOOT |
| c2e49f70 RA |
158 | #endif |
| 159 | ||
| 160 | #define CONFIG_SYS_INIT_RAM_LOCK 1 | |
| 161 | #define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */ | |
| 162 | #define CONFIG_SYS_INIT_RAM_END 0x1000 /* size */ | |
| 163 | ||
| 164 | #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* size init data */ | |
| 165 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ | |
| 166 | CONFIG_SYS_GBL_DATA_SIZE) | |
| 167 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 168 | ||
| 169 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */ | |
| 170 | #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Malloc size */ | |
| 171 | ||
| 172 | /* | |
| 173 | * Local Bus LCRR and LBCR regs | |
| 1dee9be6 | 174 | * LCRR: no DLL bypass, Clock divider is 4 |
| c2e49f70 RA |
175 | * External Local Bus rate is |
| 176 | * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV | |
| 177 | */ | |
| c7190f02 | 178 | #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 |
| c2e49f70 RA |
179 | #define CONFIG_SYS_LBC_LBCR 0x00000000 |
| 180 | ||
| 181 | #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ | |
| 182 | ||
| 183 | /* | |
| 184 | * Serial Port | |
| 185 | */ | |
| 186 | #define CONFIG_CONS_INDEX 1 | |
| 187 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
| 188 | #define CONFIG_SYS_NS16550 | |
| 189 | #define CONFIG_SYS_NS16550_SERIAL | |
| 190 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 191 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| 192 | ||
| 193 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 194 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} | |
| 195 | ||
| 196 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) | |
| 197 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) | |
| 198 | ||
| 199 | #define CONFIG_CMDLINE_EDITING /* add command line history */ | |
| 200 | /* Use the HUSH parser */ | |
| 201 | #define CONFIG_SYS_HUSH_PARSER | |
| 202 | #ifdef CONFIG_SYS_HUSH_PARSER | |
| 203 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 204 | #endif | |
| 205 | ||
| 206 | /* pass open firmware flat tree */ | |
| 207 | #define CONFIG_OF_LIBFDT | |
| 208 | #define CONFIG_OF_BOARD_SETUP | |
| 209 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
| 210 | ||
| 211 | /* I2C */ | |
| 212 | #define CONFIG_I2C_MULTI_BUS | |
| 213 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
| 214 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
| 215 | #define CONFIG_FSL_I2C | |
| 216 | #define CONFIG_I2C_CMD_TREE | |
| 217 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ | |
| 218 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| 219 | #define CONFIG_SYS_I2C_NOPROBES {{0, 0x69}} /* Don't probe these addrs */ | |
| 220 | #define CONFIG_SYS_I2C1_OFFSET 0x3000 | |
| 221 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
| 222 | #define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C1_OFFSET | |
| efaf6f1b | 223 | /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */ |
| c2e49f70 RA |
224 | |
| 225 | #define CONFIG_SYS_I2C_8574_ADDR2 0x20 /* I2C1, PCF8574 */ | |
| 226 | ||
| 227 | /* TSEC */ | |
| 228 | #define CONFIG_SYS_TSEC1_OFFSET 0x24000 | |
| 229 | #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) | |
| 230 | #define CONFIG_SYS_TSEC2_OFFSET 0x25000 | |
| 231 | #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET) | |
| 232 | ||
| 233 | /* | |
| 234 | * General PCI | |
| 235 | * Addresses are mapped 1-1. | |
| 236 | */ | |
| 237 | #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 | |
| 238 | #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE | |
| 239 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ | |
| 240 | #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 | |
| 241 | #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE | |
| 242 | #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ | |
| 243 | #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 | |
| 244 | #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 | |
| 245 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ | |
| 246 | ||
| 247 | #define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 | |
| 248 | #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE | |
| 249 | #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ | |
| 250 | #define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 | |
| 251 | #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE | |
| 252 | #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ | |
| 253 | #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 | |
| 254 | #define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 | |
| 255 | #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ | |
| 256 | ||
| 257 | #if defined(CONFIG_PCI) | |
| 258 | ||
| 259 | #define PCI_64BIT | |
| 260 | #define PCI_ONE_PCI1 | |
| 261 | #if defined(PCI_64BIT) | |
| 262 | #undef PCI_ALL_PCI1 | |
| 263 | #undef PCI_TWO_PCI1 | |
| 264 | #undef PCI_ONE_PCI1 | |
| 265 | #endif | |
| 266 | ||
| 1dee9be6 | 267 | #ifndef VME_CADDY2 |
| c2e49f70 | 268 | #define CONFIG_NET_MULTI |
| 1dee9be6 RA |
269 | #endif |
| 270 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| c2e49f70 RA |
271 | |
| 272 | #undef CONFIG_EEPRO100 | |
| 273 | #undef CONFIG_TULIP | |
| 274 | ||
| 275 | #if !defined(CONFIG_PCI_PNP) | |
| 276 | #define PCI_ENET0_IOADDR 0xFIXME | |
| 277 | #define PCI_ENET0_MEMADDR 0xFIXME | |
| 278 | #define PCI_IDSEL_NUMBER 0xFIXME | |
| 279 | #endif | |
| 280 | ||
| 1dee9be6 RA |
281 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| 282 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ | |
| 283 | ||
| c2e49f70 RA |
284 | #endif /* CONFIG_PCI */ |
| 285 | ||
| 286 | /* | |
| 287 | * TSEC configuration | |
| 288 | */ | |
| 1dee9be6 RA |
289 | #ifdef VME_CADDY2 |
| 290 | #define CONFIG_E1000 | |
| 291 | #else | |
| c2e49f70 | 292 | #define CONFIG_TSEC_ENET /* TSEC ethernet support */ |
| 1dee9be6 | 293 | #endif |
| c2e49f70 RA |
294 | |
| 295 | #if defined(CONFIG_TSEC_ENET) | |
| 296 | #ifndef CONFIG_NET_MULTI | |
| 297 | #define CONFIG_NET_MULTI | |
| 298 | #endif | |
| 299 | ||
| 1dee9be6 | 300 | #define CONFIG_GMII /* MII PHY management */ |
| c2e49f70 RA |
301 | #define CONFIG_TSEC1 |
| 302 | #define CONFIG_TSEC1_NAME "TSEC0" | |
| 303 | #define CONFIG_TSEC2 | |
| 304 | #define CONFIG_TSEC2_NAME "TSEC1" | |
| 305 | #define CONFIG_PHY_M88E1111 | |
| 306 | #define TSEC1_PHY_ADDR 0x08 | |
| 307 | #define TSEC2_PHY_ADDR 0x10 | |
| 308 | #define TSEC1_PHYIDX 0 | |
| 309 | #define TSEC2_PHYIDX 0 | |
| 310 | #define TSEC1_FLAGS TSEC_GIGABIT | |
| 311 | #define TSEC2_FLAGS TSEC_GIGABIT | |
| 312 | ||
| 313 | /* Options are: TSEC[0-1] */ | |
| 314 | #define CONFIG_ETHPRIME "TSEC0" | |
| 315 | ||
| 316 | #endif /* CONFIG_TSEC_ENET */ | |
| 317 | ||
| 1dee9be6 RA |
318 | #if defined(CONFIG_E1000) |
| 319 | #ifndef CONFIG_NET_MULTI | |
| 320 | #define CONFIG_NET_MULTI | |
| 321 | #endif | |
| 322 | #endif | |
| 323 | ||
| c2e49f70 RA |
324 | /* |
| 325 | * Environment | |
| 326 | */ | |
| 327 | #ifndef CONFIG_SYS_RAMBOOT | |
| 328 | #define CONFIG_ENV_IS_IN_FLASH | |
| 329 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0xc0000) | |
| 330 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ | |
| 331 | #define CONFIG_ENV_SIZE 0x2000 | |
| 332 | ||
| 333 | /* Address and size of Redundant Environment Sector */ | |
| 334 | #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) | |
| 335 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
| 336 | ||
| 337 | #else | |
| 338 | #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ | |
| 339 | #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ | |
| 340 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) | |
| 341 | #define CONFIG_ENV_SIZE 0x2000 | |
| 342 | #endif | |
| 343 | ||
| 344 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 345 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 346 | ||
| 347 | /* | |
| 348 | * BOOTP options | |
| 349 | */ | |
| 350 | #define CONFIG_BOOTP_BOOTFILESIZE | |
| 351 | #define CONFIG_BOOTP_BOOTPATH | |
| 352 | #define CONFIG_BOOTP_GATEWAY | |
| 353 | #define CONFIG_BOOTP_HOSTNAME | |
| 354 | ||
| 355 | /* | |
| 356 | * Command line configuration. | |
| 357 | */ | |
| 358 | #include <config_cmd_default.h> | |
| 359 | ||
| 360 | #define CONFIG_CMD_I2C | |
| 361 | #define CONFIG_CMD_MII | |
| 362 | #define CONFIG_CMD_PING | |
| 363 | #define CONFIG_CMD_DATE | |
| 364 | #define CONFIG_SYS_RTC_BUS_NUM 0x01 | |
| 365 | #define CONFIG_SYS_I2C_RTC_ADDR 0x32 | |
| 366 | #define CONFIG_RTC_RX8025 | |
| 367 | #define CONFIG_CMD_TSI148 | |
| 368 | ||
| 369 | #if defined(CONFIG_PCI) | |
| 370 | #define CONFIG_CMD_PCI | |
| 371 | #endif | |
| 372 | ||
| 373 | #if defined(CONFIG_SYS_RAMBOOT) | |
| 374 | #undef CONFIG_CMD_ENV | |
| 375 | #undef CONFIG_CMD_LOADS | |
| 376 | #endif | |
| 377 | ||
| 378 | #define CONFIG_CMD_ELF | |
| 379 | /* Pass Ethernet MAC to VxWorks */ | |
| 380 | #define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0 | |
| 381 | ||
| 382 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
| 383 | ||
| 384 | /* | |
| 385 | * Miscellaneous configurable options | |
| 386 | */ | |
| 387 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 388 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 389 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 390 | ||
| 391 | #if defined(CONFIG_CMD_KGDB) | |
| 392 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 393 | #else | |
| 394 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 395 | #endif | |
| 396 | ||
| 397 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
| 398 | #define CONFIG_SYS_MAXARGS 16 /* max num of command args */ | |
| 399 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */ | |
| 400 | #define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ | |
| 401 | ||
| 402 | /* | |
| 403 | * For booting Linux, the board info and command line data | |
| 404 | * have to be in the first 8 MB of memory, since this is | |
| 405 | * the maximum mapped by the Linux kernel during initialization. | |
| 406 | */ | |
| 407 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Init Memory map for Linux*/ | |
| 408 | ||
| 409 | #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ | |
| 410 | ||
| 411 | #define CONFIG_SYS_HRCW_LOW (\ | |
| 412 | HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ | |
| 413 | HRCWL_DDR_TO_SCB_CLK_1X1 |\ | |
| 414 | HRCWL_CSB_TO_CLKIN |\ | |
| 415 | HRCWL_VCO_1X2 |\ | |
| 416 | HRCWL_CORE_TO_CSB_2X1) | |
| 417 | ||
| 418 | #if defined(PCI_64BIT) | |
| 419 | #define CONFIG_SYS_HRCW_HIGH (\ | |
| 420 | HRCWH_PCI_HOST |\ | |
| 421 | HRCWH_64_BIT_PCI |\ | |
| 422 | HRCWH_PCI1_ARBITER_ENABLE |\ | |
| 423 | HRCWH_PCI2_ARBITER_DISABLE |\ | |
| 424 | HRCWH_CORE_ENABLE |\ | |
| 425 | HRCWH_FROM_0X00000100 |\ | |
| 426 | HRCWH_BOOTSEQ_DISABLE |\ | |
| 427 | HRCWH_SW_WATCHDOG_DISABLE |\ | |
| 428 | HRCWH_ROM_LOC_LOCAL_16BIT |\ | |
| 429 | HRCWH_TSEC1M_IN_GMII |\ | |
| 430 | HRCWH_TSEC2M_IN_GMII) | |
| 431 | #else | |
| 432 | #define CONFIG_SYS_HRCW_HIGH (\ | |
| 433 | HRCWH_PCI_HOST |\ | |
| 434 | HRCWH_32_BIT_PCI |\ | |
| 435 | HRCWH_PCI1_ARBITER_ENABLE |\ | |
| 436 | HRCWH_PCI2_ARBITER_ENABLE |\ | |
| 437 | HRCWH_CORE_ENABLE |\ | |
| 438 | HRCWH_FROM_0X00000100 |\ | |
| 439 | HRCWH_BOOTSEQ_DISABLE |\ | |
| 440 | HRCWH_SW_WATCHDOG_DISABLE |\ | |
| 441 | HRCWH_ROM_LOC_LOCAL_16BIT |\ | |
| 442 | HRCWH_TSEC1M_IN_GMII |\ | |
| 443 | HRCWH_TSEC2M_IN_GMII) | |
| 444 | #endif | |
| 445 | ||
| 446 | /* System IO Config */ | |
| 447 | #define CONFIG_SYS_SICRH 0 | |
| 448 | #define CONFIG_SYS_SICRL SICRL_LDP_A | |
| 449 | ||
| 450 | #define CONFIG_SYS_HID0_INIT 0x000000000 | |
| 451 | #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK | |
| 452 | ||
| 453 | #define CONFIG_SYS_HID2 HID2_HBE | |
| 454 | ||
| 455 | #define CONFIG_SYS_GPIO1_PRELIM | |
| 456 | #define CONFIG_SYS_GPIO1_DIR 0x00100000 | |
| 457 | #define CONFIG_SYS_GPIO1_DAT 0x00100000 | |
| 458 | ||
| 459 | #define CONFIG_SYS_GPIO2_PRELIM | |
| 460 | #define CONFIG_SYS_GPIO2_DIR 0x78900000 | |
| 461 | #define CONFIG_SYS_GPIO2_DAT 0x70100000 | |
| 462 | ||
| 463 | #define CONFIG_HIGH_BATS /* High BATs supported */ | |
| 464 | ||
| 465 | /* DDR @ 0x00000000 */ | |
| 466 | #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ | |
| 467 | BATL_MEMCOHERENCE) | |
| 468 | #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ | |
| 469 | BATU_VS | BATU_VP) | |
| 470 | ||
| 471 | /* PCI @ 0x80000000 */ | |
| 472 | #ifdef CONFIG_PCI | |
| 473 | #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | \ | |
| 474 | BATL_MEMCOHERENCE) | |
| 475 | #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ | |
| 476 | BATU_VS | BATU_VP) | |
| 477 | #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \ | |
| 478 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) | |
| 479 | #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ | |
| 480 | BATU_VS | BATU_VP) | |
| 481 | #else | |
| 482 | #define CONFIG_SYS_IBAT1L (0) | |
| 483 | #define CONFIG_SYS_IBAT1U (0) | |
| 484 | #define CONFIG_SYS_IBAT2L (0) | |
| 485 | #define CONFIG_SYS_IBAT2U (0) | |
| 486 | #endif | |
| 487 | ||
| 488 | #ifdef CONFIG_MPC83XX_PCI2 | |
| 489 | #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | \ | |
| 490 | BATL_MEMCOHERENCE) | |
| 491 | #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \ | |
| 492 | BATU_VS | BATU_VP) | |
| 493 | #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | \ | |
| 494 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) | |
| 495 | #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \ | |
| 496 | BATU_VS | BATU_VP) | |
| 497 | #else | |
| 498 | #define CONFIG_SYS_IBAT3L (0) | |
| 499 | #define CONFIG_SYS_IBAT3U (0) | |
| 500 | #define CONFIG_SYS_IBAT4L (0) | |
| 501 | #define CONFIG_SYS_IBAT4U (0) | |
| 502 | #endif | |
| 503 | ||
| 504 | /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ | |
| 505 | #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \ | |
| 506 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) | |
| 507 | #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | \ | |
| 508 | BATU_VS | BATU_VP) | |
| 509 | ||
| 510 | #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) | |
| 511 | #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) | |
| 512 | ||
| 513 | #if (CONFIG_SYS_DDR_SIZE == 512) | |
| 514 | #define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ | |
| 515 | BATL_PP_10 | BATL_MEMCOHERENCE) | |
| 516 | #define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ | |
| 517 | BATU_BL_256M | BATU_VS | BATU_VP) | |
| 518 | #else | |
| 519 | #define CONFIG_SYS_IBAT7L (0) | |
| 520 | #define CONFIG_SYS_IBAT7U (0) | |
| 521 | #endif | |
| 522 | ||
| 523 | #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L | |
| 524 | #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U | |
| 525 | #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L | |
| 526 | #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U | |
| 527 | #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L | |
| 528 | #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U | |
| 529 | #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L | |
| 530 | #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U | |
| 531 | #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L | |
| 532 | #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U | |
| 533 | #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L | |
| 534 | #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U | |
| 535 | #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L | |
| 536 | #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U | |
| 537 | #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L | |
| 538 | #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U | |
| 539 | ||
| 540 | /* | |
| 541 | * Internal Definitions | |
| 542 | * | |
| 543 | * Boot Flags | |
| 544 | */ | |
| 545 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| 546 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| 547 | ||
| 548 | #if defined(CONFIG_CMD_KGDB) | |
| 549 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ | |
| 550 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| 551 | #endif | |
| 552 | ||
| 553 | /* | |
| 554 | * Environment Configuration | |
| 555 | */ | |
| 556 | #define CONFIG_ENV_OVERWRITE | |
| 557 | ||
| 558 | #if defined(CONFIG_TSEC_ENET) | |
| 559 | #define CONFIG_HAS_ETH0 | |
| 560 | #define CONFIG_HAS_ETH1 | |
| 561 | #endif | |
| 562 | ||
| 563 | #define CONFIG_HOSTNAME VME8349 | |
| 564 | #define CONFIG_ROOTPATH /tftpboot/rootfs | |
| 565 | #define CONFIG_BOOTFILE uImage | |
| 566 | ||
| 79f516bc | 567 | #define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */ |
| c2e49f70 RA |
568 | |
| 569 | #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ | |
| 570 | #undef CONFIG_BOOTARGS /* boot command will set bootargs */ | |
| 571 | ||
| 1dee9be6 | 572 | #define CONFIG_BAUDRATE 9600 |
| c2e49f70 RA |
573 | |
| 574 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 575 | "netdev=eth0\0" \ | |
| 576 | "hostname=vme8349\0" \ | |
| 577 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
| 578 | "nfsroot=${serverip}:${rootpath}\0" \ | |
| 579 | "ramargs=setenv bootargs root=/dev/ram rw\0" \ | |
| 580 | "addip=setenv bootargs ${bootargs} " \ | |
| 581 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ | |
| 582 | ":${hostname}:${netdev}:off panic=1\0" \ | |
| 583 | "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ | |
| 584 | "flash_nfs=run nfsargs addip addtty;" \ | |
| 585 | "bootm ${kernel_addr}\0" \ | |
| 586 | "flash_self=run ramargs addip addtty;" \ | |
| 587 | "bootm ${kernel_addr} ${ramdisk_addr}\0" \ | |
| 588 | "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ | |
| 589 | "bootm\0" \ | |
| 590 | "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0" \ | |
| 591 | "update=protect off fff00000 fff3ffff; " \ | |
| 592 | "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ | |
| 593 | "upd=run load update\0" \ | |
| 79f516bc | 594 | "fdtaddr=780000\0" \ |
| c2e49f70 RA |
595 | "fdtfile=vme8349.dtb\0" \ |
| 596 | "" | |
| 597 | ||
| 598 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 599 | "setenv bootargs root=/dev/nfs rw " \ | |
| 600 | "nfsroot=$serverip:$rootpath " \ | |
| 601 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 602 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 603 | "tftp $loadaddr $bootfile;" \ | |
| 604 | "tftp $fdtaddr $fdtfile;" \ | |
| 605 | "bootm $loadaddr - $fdtaddr" | |
| 606 | ||
| 607 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 608 | "setenv bootargs root=/dev/ram rw " \ | |
| 609 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 610 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 611 | "tftp $loadaddr $bootfile;" \ | |
| 612 | "tftp $fdtaddr $fdtfile;" \ | |
| 613 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 614 | ||
| 615 | #define CONFIG_BOOTCOMMAND "run flash_self" | |
| 616 | ||
| 1dee9be6 RA |
617 | #ifndef __ASSEMBLY__ |
| 618 | int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen, | |
| 619 | unsigned char *buffer, int len); | |
| 620 | #endif | |
| 621 | ||
| c2e49f70 | 622 | #endif /* __CONFIG_H */ |