[people/ms/u-boot.git] / include / configs / warp7.h

/*
 * Copyright (C) 2016 NXP Semiconductors
 *
 * Configuration settings for the i.MX7S Warp board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __WARP7_CONFIG_H
#define __WARP7_CONFIG_H

#include "mx7_common.h"

#define PHYS_SDRAM_SIZE			SZ_512M

#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)

/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART

#define CONFIG_DFU_ENV_SETTINGS \
	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \

#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_DFU_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"ethact=usb_ether\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx7s-warp.dtb\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"finduuid=part uuid mmc 0:2 uuid\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=PARTUUID=${uuid} rootwait rw\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run finduuid; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "fi; " \
		   "fi; " \
	   "fi"

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_SPEED		100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_IS_IN_MMC

#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_SYS_FSL_USDHC_NUM	1

#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		0

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */

#define CONFIG_IMX_THERMAL

#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* USB Device Firmware Update support */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT	300

#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR		"de:ad:be:af:00:00"
#define CONFIG_USBNET_DEV_ADDR		"de:ad:be:af:00:01"

#endif
Commit	Line	Data
47173483 FE	1	/*
	2	* Copyright (C) 2016 NXP Semiconductors
	3	*
	4	* Configuration settings for the i.MX7S Warp board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __WARP7_CONFIG_H
	10	#define __WARP7_CONFIG_H
	11
47173483 FE	12	#include "mx7_common.h"
	13
	14	#define PHYS_SDRAM_SIZE SZ_512M
	15
01f512bc FE	16	#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
01f512bc FE	17
6baa2616	18	/* Size of malloc() pool */
67ef2c13	19	#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
6baa2616	20
47173483 FE	21	/* MMC Config*/
	22	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
	23	#define CONFIG_SUPPORT_EMMC_BOOT
	24	#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
	25	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	26
ca4f338e FE	27	#define CONFIG_PARTITION_UUIDS
	28	#define CONFIG_CMD_PART
	29
47173483	30	#define CONFIG_DFU_ENV_SETTINGS \
67ef2c13	31	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
47173483 FE	32
	33	#define CONFIG_EXTRA_ENV_SETTINGS \
	34	CONFIG_DFU_ENV_SETTINGS \
	35	"script=boot.scr\0" \
	36	"image=zImage\0" \
	37	"console=ttymxc0\0" \
25aaebdb	38	"ethact=usb_ether\0" \
47173483 FE	39	"fdt_high=0xffffffff\0" \
47173483 FE	40	"initrd_high=0xffffffff\0" \
ed395226	41	"fdt_file=imx7s-warp.dtb\0" \
47173483 FE	42	"fdt_addr=0x83000000\0" \
	43	"boot_fdt=try\0" \
	44	"ip_dyn=yes\0" \
	45	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	46	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
ca4f338e	47	"finduuid=part uuid mmc 0:2 uuid\0" \
47173483	48	"mmcargs=setenv bootargs console=${console},${baudrate} " \
ca4f338e	49	"root=PARTUUID=${uuid} rootwait rw\0" \
47173483 FE	50	"loadbootscript=" \
	51	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	52	"bootscript=echo Running bootscript from mmc ...; " \
	53	"source\0" \
	54	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	55	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	56	"mmcboot=echo Booting from mmc ...; " \
ca4f338e	57	"run finduuid; " \
47173483 FE	58	"run mmcargs; " \
	59	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	60	"if run loadfdt; then " \
	61	"bootz ${loadaddr} - ${fdt_addr}; " \
	62	"else " \
	63	"if test ${boot_fdt} = try; then " \
	64	"bootz; " \
	65	"else " \
	66	"echo WARN: Cannot load the DT; " \
	67	"fi; " \
	68	"fi; " \
	69	"else " \
	70	"bootz; " \
	71	"fi;\0" \
	72
	73	#define CONFIG_BOOTCOMMAND \
	74	"mmc dev ${mmcdev};" \
	75	"mmc dev ${mmcdev}; if mmc rescan; then " \
	76	"if run loadbootscript; then " \
	77	"run bootscript; " \
	78	"else " \
	79	"if run loadimage; then " \
	80	"run mmcboot; " \
	81	"fi; " \
	82	"fi; " \
	83	"fi"
	84
47173483 FE	85	#define CONFIG_SYS_MEMTEST_START 0x80000000
	86	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
	87
	88	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	89	#define CONFIG_SYS_HZ 1000
	90
	91	#define CONFIG_STACKSIZE SZ_128K
	92
	93	/* Physical Memory Map */
	94	#define CONFIG_NR_DRAM_BANKS 1
	95	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	96
	97	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	98	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	99	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	100
	101	#define CONFIG_SYS_INIT_SP_OFFSET \
	102	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	103	#define CONFIG_SYS_INIT_SP_ADDR \
	104	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	105
7d301a59 VM	106	/* I2C configs */
	107	#define CONFIG_SYS_I2C
	108	#define CONFIG_SYS_I2C_MXC
	109	#define CONFIG_SYS_I2C_MXC_I2C1
	110	#define CONFIG_SYS_I2C_SPEED 100000
	111
	112	/* PMIC */
	113	#define CONFIG_POWER
	114	#define CONFIG_POWER_I2C
	115	#define CONFIG_POWER_PFUZE3000
	116	#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
	117
47173483 FE	118	/* FLASH and environment organization */
	119	#define CONFIG_SYS_NO_FLASH
	120	#define CONFIG_ENV_SIZE SZ_8K
	121	#define CONFIG_ENV_IS_IN_MMC
	122
	123	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	124	#define CONFIG_SYS_FSL_USDHC_NUM 1
	125
	126	#define CONFIG_SYS_MMC_ENV_DEV 0
	127	#define CONFIG_SYS_MMC_ENV_PART 0
47173483 FE	128
47173483 FE	129	/* USB Configs */
47173483 FE	130	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	131
	132	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	133	#define CONFIG_MXC_USB_FLAGS 0
	134	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
	135
	136	#define CONFIG_IMX_THERMAL
	137
47173483	138	#define CONFIG_USBD_HS
47173483	139
47173483	140	#define CONFIG_USB_FUNCTION_MASS_STORAGE
47173483 FE	141
47173483 FE	142	/* USB Device Firmware Update support */
47173483 FE	143	#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
	144	#define DFU_DEFAULT_POLL_TIMEOUT 300
	145
25aaebdb KH	146	#define CONFIG_USB_ETHER
	147	#define CONFIG_USB_ETH_CDC
	148	#define CONFIG_USB_ETH_RNDIS
	149	#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
	150	#define CONFIG_USBNET_DEV_ADDR "de:ad:be:af:00:01"
	151
47173483	152	#endif