[people/ms/u-boot.git] / include / configs / xilinx-ppc.h

/*
 * (C) Copyright 2008
 *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
 *  This work has been supported by: QTechnology  http://qtec.com/
 *
 *  (C) Copyright 2008
 *  Georg Schardt <schardt@team-ctech.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
*/

#ifndef __CONFIG_XLX_H
#define __CONFIG_XLX_H


/*
#define DEBUG
#define ET_DEBUG
*/

/*Mem Map*/
#define CONFIG_SYS_SDRAM_BASE		0x0
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)

/*Cmd*/
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_MTDPARTS
#undef CONFIG_CMD_SPI
#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_DTT
#undef CONFIG_CMD_PING
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_EEPROM

/*Misc*/
#define CONFIG_BOOTDELAY		5/* autoboot after 5 seconds     */
#define CONFIG_SYS_LONGHELP		/* undef to save memory         */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024/* Console I/O Buffer Size      */
#else
#define CONFIG_SYS_CBSIZE		256/* Console I/O Buffer Size      */
#endif
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +\
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16
					/* max number of command args   */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
					/* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START	0x00400000
					/* memtest works on           */
#define CONFIG_SYS_MEMTEST_END		0x00C00000
					/* 4 ... 12 MB in DRAM        */
#define CONFIG_SYS_LOAD_ADDR		0x00400000
					/* default load address       */
#define CONFIG_SYS_EXTBDINFO		1
					/* Extended board_into (bd_t) */
					/* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING		/* add command line history     */
#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
#define CONFIG_LOOPW			/* enable loopw command         */
#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE		/* include version env variable */
#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
#define CONFIG_LOADS_ECHO		/* echo on for serial download  */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change        */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
				/* Initial Memory map for Linux */

/*Stack*/
#define CONFIG_SYS_INIT_RAM_ADDR	0x800000/* Initial RAM address    */
#define CONFIG_SYS_INIT_RAM_SIZE		0x2000	/* Size of used area in RAM  */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
				- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
/*Speed*/
#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ

/*Flash*/
#ifdef XPAR_FLASH_MEM0_BASEADDR
#define	CONFIG_SYS_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
#define	CONFIG_SYS_FLASH_CFI		1
#define	CONFIG_FLASH_CFI_DRIVER	1
#define	CONFIG_SYS_FLASH_EMPTY_INFO	1
#define	CONFIG_SYS_MAX_FLASH_BANKS	1
#define	CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
#else
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_NO_FLASH
#endif

#define CONFIG_BAUDRATE			115200
/* The following table includes the supported baudrates */
# define CONFIG_SYS_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

#endif						/* __CONFIG_H */
Commit	Line	Data
cc2dc9b0 RR	1	/*
cc2dc9b0 RR	2	* (C) Copyright 2008
5b218ae1	3	* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
cc2dc9b0 RR	4	* This work has been supported by: QTechnology http://qtec.com/
	5	*
	6	* (C) Copyright 2008
	7	* Georg Schardt <schardt@team-ctech.de>
	8	*
1a459660	9	* SPDX-License-Identifier: GPL-2.0+
cc2dc9b0 RR	10	*/
	11
	12	#ifndef __CONFIG_XLX_H
	13	#define __CONFIG_XLX_H
d67b72d5	14
d67b72d5	15
cc2dc9b0 RR	16	/*
	17	#define DEBUG
	18	#define ET_DEBUG
	19	*/
	20
	21	/Mem Map/
	22	#define CONFIG_SYS_SDRAM_BASE 0x0
14d0a02a	23	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
cc2dc9b0 RR	24	#define CONFIG_SYS_MONITOR_LEN (192 * 1024)
	25	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
	26
	27	/Cmd/
cc2dc9b0 RR	28	#define CONFIG_CMD_ASKENV
	29	#define CONFIG_CMD_CACHE
	30	#define CONFIG_CMD_DIAG
cc2dc9b0 RR	31	#define CONFIG_CMD_IRQ
	32	#define CONFIG_CMD_REGINFO
	33	#undef CONFIG_CMD_JFFS2
68d7d651	34	#undef CONFIG_CMD_MTDPARTS
cc2dc9b0 RR	35	#undef CONFIG_CMD_SPI
	36	#undef CONFIG_CMD_I2C
	37	#undef CONFIG_CMD_DTT
cc2dc9b0 RR	38	#undef CONFIG_CMD_PING
	39	#undef CONFIG_CMD_DHCP
	40	#undef CONFIG_CMD_EEPROM
cc2dc9b0 RR	41
	42	/Misc/
	43	#define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */
	44	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	45	#if defined(CONFIG_CMD_KGDB)
	46	#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
	47	#else
	48	#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
	49	#endif
	50	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
	51	sizeof(CONFIG_SYS_PROMPT) + 16)
	52	#define CONFIG_SYS_MAXARGS 16
	53	/* max number of command args */
	54	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	55	/* Boot Argument Buffer Size */
	56	#define CONFIG_SYS_MEMTEST_START 0x00400000
	57	/* memtest works on */
	58	#define CONFIG_SYS_MEMTEST_END 0x00C00000
	59	/* 4 ... 12 MB in DRAM */
	60	#define CONFIG_SYS_LOAD_ADDR 0x00400000
	61	/* default load address */
	62	#define CONFIG_SYS_EXTBDINFO 1
	63	/* Extended board_into (bd_t) */
cc2dc9b0 RR	64	/* decrementer freq: 1 ms ticks */
	65	#define CONFIG_CMDLINE_EDITING /* add command line history */
	66	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	67	#define CONFIG_LOOPW /* enable loopw command */
	68	#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
	69	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	70	#define CONFIG_VERSION_VARIABLE /* include version env variable */
	71	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
cc2dc9b0 RR	72	#define CONFIG_LOADS_ECHO /* echo on for serial download */
	73	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
	74	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
	75	/* Initial Memory map for Linux */
	76
	77	/Stack/
	78	#define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */
553f0982	79	#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
553f0982	80	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
25ddd1fb	81	- GENERATED_GBL_DATA_SIZE)
cc2dc9b0 RR	82	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	83	/Speed/
	84	#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
	85
	86	/Flash/
	87	#ifdef XPAR_FLASH_MEM0_BASEADDR
	88	#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
	89	#define CONFIG_SYS_FLASH_CFI 1
	90	#define CONFIG_FLASH_CFI_DRIVER 1
	91	#define CONFIG_SYS_FLASH_EMPTY_INFO 1
	92	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	93	#define CONFIG_SYS_FLASH_PROTECTION
	94	#define CONFIG_CMD_JFFS2
68d7d651	95	#define CONFIG_CMD_MTDPARTS
942556a9 SR	96	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
942556a9 SR	97	#define CONFIG_FLASH_CFI_MTD
cc2dc9b0 RR	98	#else
	99	#define CONFIG_ENV_IS_NOWHERE
	100	#define CONFIG_SYS_NO_FLASH
	101	#endif
	102
cc2dc9b0	103	#define CONFIG_BAUDRATE 115200
80cce262 RR	104	/* The following table includes the supported baudrates */
	105	# define CONFIG_SYS_BAUDRATE_TABLE \
	106	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
cc2dc9b0 RR	107
cc2dc9b0 RR	108	#endif /* __CONFIG_H */