CHANGELOG

   1 commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
   2 Author: Mike Frysinger <vapier@gentoo.org>
   3 Date:   Thu Dec 11 18:39:08 2008 -0500
   4
   5     spi/stmicro: fix debug() display of cmd
   6
   7     The stmicro_wait_ready() func tries to show the actual opcode that was sent
   8     to the device, but instead it displays the array pointer.  Fix it to pull
   9     out the opcode from the start of the array.
  10
  11     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
  12
  13 commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
  14 Author: Mike Frysinger <vapier@gentoo.org>
  15 Date:   Thu Dec 11 06:23:37 2008 -0500
  16
  17     env_sf: support embedded environments
  18
  19     If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
  20     size is larger than the env size, then it means the env is embedded in a
  21     block.  So we have to save/restore the part of the sector which is not the
  22     environment.  Previously, saving the environment in SPI flash in this
  23     setup would probably brick the board as the rest of the sector tends to
  24     contain actual U-Boot data/code.
  25
  26     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
  27     Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
  28
  29 commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
  30 Author: Timur Tabi <timur@freescale.com>
  31 Date:   Wed Dec 3 11:28:30 2008 -0600
  32
  33     i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
  34
  35     All implementations of the functions i2c_reg_read() and
  36     i2c_reg_write() are identical. We can save space and simplify the
  37     code by converting these functions into inlines and putting them in
  38     i2c.h.
  39
  40     Signed-off-by: Timur Tabi <timur@freescale.com>
  41     Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  42
  43 commit e39cd81c44740d7355d277ed3d38536cbe1e003d
  44 Author: Dave Liu <daveliu@freescale.com>
  45 Date:   Fri Dec 5 15:36:14 2008 +0800
  46
  47     lib_ppc: rework the flush_cache
  48
  49     - It is possible to miss flush/invalidate the last
  50       cache line, we fix it at here.
  51     - add the volatile and memory clobber.
  52
  53     They are pointed by Scott Wood.
  54
  55     Signed-off-by: Dave Liu <daveliu@freescale.com>
  56
  57 commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
  58 Author: Kumar Gala <galak@kernel.crashing.org>
  59 Date:   Sat Dec 13 17:20:28 2008 -0600
  60
  61     Introduce addr_map library
  62
  63     Add a library that helps in translating between virtual and physical
  64     addresses.  This library can be useful as a simple means to implement
  65     map_physmem() and virt_to_phys() for platforms that need functionality
  66     beyond the simple 1:1 mapping.
  67
  68     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
  69
  70 commit 65e43a10631537dcb92c302d36301a12308216c3
  71 Author: Kumar Gala <galak@kernel.crashing.org>
  72 Date:   Sat Dec 13 17:20:27 2008 -0600
  73
  74     Introduce virt_to_phys()
  75
  76     virt_to_phys() returns the physical address given a virtual. In most
  77     cases this will be just the input value as the vast majority of
  78     systems run in a 1:1 mode.
  79
  80     However in systems that are not running this way it should report the
  81     physical address or ~0 if no mapping exists for the given virtual
  82     address.
  83
  84     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
  85
  86 commit 45845301af3de8675c1f7bbc815c6de35452605a
  87 Author: Yuri Tikhonov <yur@emcraft.com>
  88 Date:   Sun Dec 7 22:12:50 2008 +0100
  89
  90     POST Make: fix the sub-dir dependencies missing.
  91
  92     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
  93
  94 commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
  95 Author: Martin Michlmayr <tbm@cyrius.com>
  96 Date:   Wed Aug 6 14:44:05 2008 +0300
  97
  98     Fix a typo in fw_env.config
  99
 100     Reported-by: Martin Michlmayr <tbm@cyrius.com>
 101     Signed-off-by: Wolfgang Denk <wd@denx.de>
 102
 103 commit ba490b7761c62b549c222a9723e532dc801a3899
 104 Author: Peter Tyser <ptyser@xes-inc.com>
 105 Date:   Mon Dec 1 16:22:45 2008 -0600
 106
 107     Remove unused CONFIG_ADDR_STREAMING defines
 108
 109     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
 110
 111 commit d16da93430520d3e46c1ab52eedacf36ab7a2311
 112 Author: Peter Tyser <ptyser@xes-inc.com>
 113 Date:   Mon Nov 24 11:54:47 2008 -0600
 114
 115     cmd_mem: Remove unused variable
 116
 117     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
 118
 119 commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
 120 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 121 Date:   Sun Dec 14 10:29:39 2008 +0100
 122
 123     Fix new found CFG_
 124
 125     Also fix some minor typos.
 126
 127     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 128     Signed-off-by: Wolfgang Denk <wd@denx.de>
 129
 130 commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
 131 Author: Sergei Poselenov <sposelenov@emcraft.com>
 132 Date:   Fri Sep 19 12:07:34 2008 +0200
 133
 134     Remove compiler warning: target CPU does not support interworking
 135
 136     This warning is issued by modern ARM-EABI GCC on non-thumb targets.
 137
 138     Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
 139     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
 140
 141 commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
 142 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 143 Date:   Mon Nov 24 13:33:51 2008 +0100
 144
 145     Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
 146
 147     FDT support is used for both FIT style images and for architectures
 148     that can pass a fdt blob to an OS (ppc, m68k, sparc).
 149
 150     For other architectures and boards which do not pass a fdt blob to an
 151     OS but want to use the new uImage format, we just need FIT support.
 152
 153     Now we can have the 4 following configurations :
 154
 155     1) FIT only             CONFIG_FIT
 156     2) fdt blob only        CONFIG_OF_LIBFDT
 157     3) both                 CONFIG_OF_LIBFDT & CONFIG_FIT
 158     4) none                 none
 159
 160     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 161
 162 commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
 163 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 164 Date:   Wed Dec 10 15:13:32 2008 +0100
 165
 166     ppc4xx: Disable EEPROM write access on PMC440 boards
 167
 168     This patch disables EEPROM wrtie access by default on PMC440 board.
 169
 170     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 171
 172 commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
 173 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 174 Date:   Wed Dec 10 15:12:56 2008 +0100
 175
 176     ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
 177
 178     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 179
 180 commit 71fa0714fe5134bc8718c38d5261d267e88582ba
 181 Author: Stefan Roese <sr@denx.de>
 182 Date:   Tue Nov 18 16:36:12 2008 +0100
 183
 184     MIPS: Flush data cache upon relocation
 185
 186     This patch now adds a flush to the data cache upon relocation. The
 187     current implementation is missing this. Only a comment states that it
 188     should be done. So let's really do it now.
 189
 190     Signed-off-by: Stefan Roese <sr@denx.de>
 191     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
 192
 193 commit 44174343688dba32571a34550dba08971c65fef1
 194 Author: Stefan Roese <sr@denx.de>
 195 Date:   Tue Nov 18 16:36:22 2008 +0100
 196
 197     MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
 198
 199     This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
 200     enables support for boards where the lowlevel initialization is
 201     already done when U-Boot runs (e.g. via OnChip ROM).
 202
 203     This will be used in the upcoming VCTH board support.
 204
 205     Signed-off-by: Stefan Roese <sr@denx.de>
 206     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
 207
 208 commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
 209 Author: Stefan Roese <sr@denx.de>
 210 Date:   Wed Nov 12 13:18:02 2008 +0100
 211
 212     MIPS: Add board_early_init_f() to init_sequence
 213
 214     This patch adds the board_early_init_f() call to the MIPS init
 215     sequence. A weak dummy implementation is also added which can be
 216     overridden by a board specific version.
 217
 218     This will be used by the upcoming VCTH board support.
 219
 220     Signed-off-by: Stefan Roese <sr@denx.de>
 221     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
 222
 223 commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
 224 Author: Stefan Roese <sr@denx.de>
 225 Date:   Wed Nov 12 13:18:19 2008 +0100
 226
 227     MIPS: Add onenand_init() to board.c and move nand_init()
 228
 229     This patch adds a call to onenand_init() for OneNAND support and moves
 230     the nand_init() call to an earlier place, so that the environment can
 231     be used from NAND and OneNAND.
 232
 233     Signed-off-by: Stefan Roese <sr@denx.de>
 234     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
 235
 236 commit d8bbc51c7ba9b737a20984333d19fe28a3526431
 237 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 238 Date:   Tue Dec 9 11:32:46 2008 +0900
 239
 240     sh: Update sh2/sh2a timer
 241
 242     Renesas SH2/SH2A timer broken.
 243     This patch fix timer function.
 244
 245     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 246     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 247
 248 commit a319f1496210117b73198e3d889ffffaf6825d00
 249 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 250 Date:   Fri Dec 5 07:27:37 2008 +0100
 251
 252     sh: r2dplus fix register access
 253
 254     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 255     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 256
 257 commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
 258 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 259 Date:   Tue Dec 2 07:40:03 2008 +0100
 260
 261     sh: r2dplus/lowlevel_init: coding style fix
 262
 263     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 264     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 265
 266 commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
 267 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 268 Date:   Tue Nov 25 11:05:19 2008 +0900
 269
 270     sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
 271
 272     SH4 is different a value of CACHE_OC_NUM_ENTRIES and
 273     CACHE_OC_WAY_SHIFT every CPU.
 274     This patch corrects these values.
 275
 276     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 277     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 278
 279 commit e9d5f35497885b3c65d494d09a525d443dcccd3b
 280 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 281 Date:   Thu Nov 20 16:44:42 2008 +0900
 282
 283     sh: Update sh timer function
 284
 285     Change to write/readX function and fix timer problem.
 286
 287     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 288     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 289
 290 commit b81786cff476c41e332eaeb679158f6527cd67d4
 291 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 292 Date:   Tue Nov 4 11:58:58 2008 +0900
 293
 294     sh: Migo-R: Update BSC value
 295
 296     A value of BSC CS4 was wrong, Fixed it.
 297
 298     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 299     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 300
 301 commit 5783758fd260a02f44566ad8f29f899565cd0403
 302 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 303 Date:   Mon Nov 17 16:52:09 2008 +0900
 304
 305     sh: Update ms7722se board config
 306
 307     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 308     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 309
 310 commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
 311 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 312 Date:   Mon Nov 17 16:53:09 2008 +0900
 313
 314     sh: Update SuperH serial driver
 315
 316     The address of SCFSR register is wrong at SH7720/SH7721.
 317     This patch fix this.
 318
 319     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
 320     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 321
 322 commit 9a1d3557dcd47365c12eeab584b822e57d994352
 323 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 324 Date:   Tue Nov 11 22:20:15 2008 +0100
 325
 326     sh: fix rsk7203 and MigoR out of tree build
 327
 328     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 329     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 330
 331 commit 1951f847f0a851853871b613ad7cf21a5242226c
 332 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 333 Date:   Wed Dec 10 14:41:25 2008 +0100
 334
 335     ppc4xx: Update TEXT_BASE for CPCI405 boards
 336
 337     This patch fixes building U-Boot for CPCI405 boards.
 338
 339     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 340     Signed-off-by: Stefan Roese <sr@denx.de>
 341
 342 commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
 343 Author: Stefan Roese <sr@denx.de>
 344 Date:   Tue Dec 9 20:08:01 2008 +0100
 345
 346     ppc4xx: Remove some features from ALPR to fit into 256k again
 347
 348     Signed-off-by: Stefan Roese <sr@denx.de>
 349
 350 commit 3b089e4f889a2902449d55e081c886ae607cae89
 351 Author: Stefan Roese <sr@denx.de>
 352 Date:   Wed Dec 10 10:32:59 2008 +0100
 353
 354     UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
 355
 356     With this patch we set the type back to NONE upon failing UBI partition
 357     initialization. Otherwise further calls to the UBI subsystem would try
 358     to really access the non-existing UBI partition.
 359
 360     Thanks to Michael Lawnick for pointing this out.
 361
 362     Signed-off-by: Stefan Roese <sr@denx.de>
 363
 364 commit 817329351639a8895cd9b87b33aeff043f3d5a44
 365 Author: Stefan Roese <sr@denx.de>
 366 Date:   Wed Dec 10 10:28:33 2008 +0100
 367
 368     UBI: Return -ENOMEM upon failing malloc
 369
 370     Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
 371     failing malloc().
 372
 373     Signed-off-by: Stefan Roese <sr@denx.de>
 374
 375 commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
 376 Author: Ben Warren <biggerbadderben@gmail.com>
 377 Date:   Tue Dec 9 23:34:15 2008 -0800
 378
 379     Fix compile error in building MBX860T.
 380
 381     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
 382
 383 commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
 384 Author: Michal Simek <monstr@monstr.eu>
 385 Date:   Tue Nov 25 11:42:20 2008 +0100
 386
 387     microblaze: Remove XUPV2P board
 388
 389     ---
 390
 391     Microblaze platforms use generic settings and to have
 392     many platforms is confusing that's why I decided to remove this
 393     platform from U-BOOT. ml401 tree is sufficient for covering
 394     all Microblaze platforms.
 395
 396     This change will go through microblaze custodian tree.
 397
 398 commit 99ba6f353582720defff6e6e6761dc455a207d31
 399 Author: Michal Simek <monstr@monstr.eu>
 400 Date:   Mon Nov 24 18:25:41 2008 +0100
 401
 402     microblaze: Remove CONFIG_LIBFDT due to error in common files
 403
 404 commit e7d591e823a991513833af7030468409e25a3b13
 405 Author: Michal Simek <monstr@monstr.eu>
 406 Date:   Mon Nov 24 11:43:00 2008 +0100
 407
 408     microblaze: Fix ml401 uart16550 setting
 409
 410     Signed-off-by: Michal Simek <monstr@monstr.eu>
 411
 412 commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
 413 Author: Michal Simek <monstr@monstr.eu>
 414 Date:   Mon Nov 24 11:38:22 2008 +0100
 415
 416     microblaze: Set up relocation is done
 417
 418 commit bcb6dd9187d4b23c748704767bd12d20c829e996
 419 Author: Mike Frysinger <vapier@gentoo.org>
 420 Date:   Tue Dec 9 23:20:31 2008 -0500
 421
 422     tools/netconsole: new script for working with netconsole over UDP
 423
 424     While the doc/README.NetConsole does have a snippet for people to
 425     create their own netcat script, it's a lot easier to make a simple
 426     dedicated script and tell people to use it.
 427
 428     Also spruce it up a bit to make it user friendly.
 429
 430     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
 431
 432 commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
 433 Author: Sonic Zhang <Sonic.Zhang@analog.com>
 434 Date:   Tue Dec 9 23:20:18 2008 -0500
 435
 436     fs/fat: handle FAT on SATA
 437
 438     The FAT file system driver should also handle FAT on SATA devices.
 439
 440     Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
 441     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
 442
 443 commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
 444 Author: Jerry Van Baren <gvb.uboot@gmail.com>
 445 Date:   Mon Nov 24 08:15:02 2008 -0500
 446
 447     libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
 448
 449     Compiling U-Boot in an old OS environment (RedHat-7.3  :-)  gives the
 450     following warnings from FDT:
 451
 452     include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
 453     /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
 454
 455     Fix: Protect the definition of uintptr_t when compiling on the host
 456     system.
 457
 458     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
 459
 460 commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
 461 Author: Graeme Russ <graeme.russ@gmail.com>
 462 Date:   Sat Nov 22 08:43:29 2008 +1100
 463
 464     Moved sc520 PCI definitions to stand-alone file
 465
 466     Signed Off By: Graeme Russ <graeme.russ@gmail.com>
 467
 468 commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
 469 Author: Graeme Russ <graeme.russ@gmail.com>
 470 Date:   Sat Nov 22 08:43:21 2008 +1100
 471
 472     Fixed path to sc520 SSI include file
 473
 474     Signed Off By: Graeme Russ <graeme.russ@gmail.com>
 475
 476 commit d4f70da544c33db3e4fce6473dea4ecca4322545
 477 Author: Graeme Russ <graeme.russ@gmail.com>
 478 Date:   Fri Nov 21 06:28:05 2008 +1100
 479
 480     Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
 481
 482     Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
 483
 484 commit c034075a713b60e654c64e88e87da29440f31bb4
 485 Author: Stefan Roese <sr@denx.de>
 486 Date:   Wed Nov 12 13:30:10 2008 +0100
 487
 488     serial: Add vcth UART driver
 489
 490     This patch adds the UART driver for the upcoming VCTH board support.
 491
 492     Signed-off-by: Stefan Roese <sr@denx.de>
 493
 494 commit 142a80ffc3b537a9c45acd2444a42a77f147c602
 495 Author: Ilya Yanok <yanok@emcraft.com>
 496 Date:   Thu Nov 13 19:49:36 2008 +0300
 497
 498     jffs2: cache data_crc results
 499
 500     As we moved data_crc() invocation from jffs2_1pass_build_lists() to
 501     jffs2_1pass_read_inode() data_crc is going to be calculated on each
 502     inode access. This patch adds caching of data_crc() results. There
 503     is no significant improvement in speed (because of flash access
 504     caching added in previous patch I think, crc in RAM is really fast)
 505     but this patch impacts memory usage -- every b_node structure uses
 506     12 bytes instead of 8.
 507
 508     Signed-off-by: Alexey Neyman <avn@emcraft.com>
 509     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
 510
 511 commit 9b7076229ec6a958bd835ab70745f7676297ce82
 512 Author: Ilya Yanok <yanok@emcraft.com>
 513 Date:   Thu Nov 13 19:49:35 2008 +0300
 514
 515     jffs2: summary support
 516
 517     This patch adds support for reading fs information from summary
 518     node instead of scanning full eraseblock.
 519
 520     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
 521
 522 commit 70741004dc28946cd82c7af6789c4ddb3fc94526
 523 Author: Ilya Yanok <yanok@emcraft.com>
 524 Date:   Thu Nov 13 19:49:34 2008 +0300
 525
 526     jffs2: add buffer to cache flash accesses
 527
 528     With this patch JFFS2 code allocates memory buffer of max_totlen size
 529     (size of the largest node, calculated during scan time) and uses it to
 530     store entire node. Speeds up loading. If malloc fails we use old ways
 531     to do things.
 532
 533     Signed-off-by: Alexey Neyman <avn@emcraft.com>
 534     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
 535
 536 commit 8a36d31f72411144ac0412ee7e1880e801acd754
 537 Author: Ilya Yanok <yanok@emcraft.com>
 538 Date:   Thu Nov 13 19:49:33 2008 +0300
 539
 540     jffs2: rewrite jffs2 scanning code based on Linux one
 541
 542     Rewrites jffs2_1pass_build_lists() function in style of Linux's
 543     jffs2_scan_medium() and jffs2_scan_eraseblock().
 544     This includes:
 545      - Caching flash acceses
 546      - Smart dealing with free space
 547
 548     Signed-off-by: Alexey Neyman <avn@emcraft.com>
 549     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
 550
 551 commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
 552 Author: Ilya Yanok <yanok@emcraft.com>
 553 Date:   Thu Nov 13 19:49:32 2008 +0300
 554
 555     jffs2: add sector_size field to part_info structure
 556
 557     This patch adds sector_size field to part_info structure (used
 558     by new JFFS2 code).
 559
 560     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
 561
 562 commit f73846956778a7dfee83403ef9747aff77198848
 563 Author: Ilya Yanok <yanok@emcraft.com>
 564 Date:   Thu Nov 13 19:49:31 2008 +0300
 565
 566     jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
 567
 568     We need to update i_version inside cycle to find really latest version
 569     inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
 570     dump_inode() instead of calling expensive jffs2_1pass_read_inode().
 571
 572     Signed-off-by: Alexey Neyman <avn@emcraft.com>
 573     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
 574
 575 commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
 576 Author: Wolfgang Denk <wd@denx.de>
 577 Date:   Tue Dec 9 23:13:51 2008 +0100
 578
 579     evb64260: fix "cast to pointer from integer of different size" warnings
 580
 581     Signed-off-by: Wolfgang Denk <wd@denx.de>
 582
 583 commit d2776827315c3d469b8cb4cec14d58877798daa2
 584 Author: Stefan Althoefer <stefan.althoefer@web.de>
 585 Date:   Sun Dec 7 19:39:11 2008 +0100
 586
 587     USB: descriptor handling
 588
 589     Hi,
 590
 591     I found a bug when working with the u-boot USB subsystem on IXP425 processor
 592     (big endian Xscale aka ARMv5).
 593     I recognized that the second usb_endpoint_descriptor of the attached memory
 594     stick was corrupted.
 595
 596     The reason for this are the packed structures below (either u-boot and
 597     u-boot-usb):
 598
 599     --------------
 600     /* Endpoint descriptor */
 601     struct usb_endpoint_descriptor {
 602         unsigned char  bLength;
 603         unsigned char  bDescriptorType;
 604         unsigned char  bEndpointAddress;
 605         unsigned char  bmAttributes;
 606         unsigned short wMaxPacketSize;
 607         unsigned char  bInterval;
 608         unsigned char  bRefresh;
 609         unsigned char  bSynchAddress;
 610
 611     } __attribute__ ((packed));
 612     /* Interface descriptor */
 613     struct usb_interface_descriptor {
 614         unsigned char  bLength;
 615         unsigned char  bDescriptorType;
 616         unsigned char  bInterfaceNumber;
 617         unsigned char  bAlternateSetting;
 618         unsigned char  bNumEndpoints;
 619         unsigned char  bInterfaceClass;
 620         unsigned char  bInterfaceSubClass;
 621         unsigned char  bInterfaceProtocol;
 622         unsigned char  iInterface;
 623
 624         unsigned char  no_of_ep;
 625         unsigned char  num_altsetting;
 626         unsigned char  act_altsetting;
 627         struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
 628     } __attribute__ ((packed));
 629     ------------
 630
 631     As usb_endpoint_descriptor is only 7byte in length, the start of all
 632     odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
 633     of these structures also not word aligned.
 634
 635     ARMv5 Architecture however does not support non-aligned multibyte
 636     data type (see A2.8 of ARM Architecture Reference Manual).
 637
 638     Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
 639     Signed-off-by: Remy Böhmer <linux@bohmer.net>
 640
 641 commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
 642 Author: Kumar Gala <galak@kernel.crashing.org>
 643 Date:   Tue Dec 9 10:27:33 2008 -0600
 644
 645     drivers/fsl_pci_init: Fix compile warning
 646
 647     fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
 648     fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
 649
 650     The check only makes sense if we are CONFIG_PHYS_64BIT
 651
 652     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
 653
 654 commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
 655 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 656 Date:   Sun Dec 7 09:45:35 2008 +0100
 657
 658     usbtty/omap: update to current API
 659
 660     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 661     Signed-off-by: Remy Böhmer <linux@bohmer.net>
 662
 663 commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
 664 Author: Anatolij Gustschin <agust@denx.de>
 665 Date:   Tue Dec 9 17:52:05 2008 +0100
 666
 667     video: fix FADS823 and RRvision compiling issues
 668
 669     Since commit 561858ee building for FADS823 and RRvision
 670     doesn't work. Let's include version.h and timestamp.h
 671     unconditionally to fix the problem.
 672
 673     Signed-off-by: Anatolij Gustschin <agust@denx.de>
 674
 675 commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
 676 Author: Stefan Roese <sr@denx.de>
 677 Date:   Tue Dec 2 10:53:47 2008 +0100
 678
 679     UBI: Fix size parsing in "ubi create"
 680
 681     Signed-off-by: Stefan Roese <sr@denx.de>
 682
 683 commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
 684 Author: Stefan Roese <sr@denx.de>
 685 Date:   Thu Nov 27 14:07:09 2008 +0100
 686
 687     UBI: Enable re-initializing of the "ubi part" command
 688
 689     With this patch now, the user can call "ubi part" multiple times to
 690     re-connect the UBI device to another MTD partition.
 691
 692     Signed-off-by: Stefan Roese <sr@denx.de>
 693
 694 commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
 695 Author: Stefan Roese <sr@denx.de>
 696 Date:   Thu Nov 27 14:05:15 2008 +0100
 697
 698     MTD: Fix problem based on non-working relocation (list head mtd_partitions)
 699
 700     Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
 701     first call of add_mtd_partitions(). Otherwise this won't work on platforms
 702     where the relocation is broken (like MIPS or PPC).
 703
 704     Signed-off-by: Stefan Roese <sr@denx.de>
 705
 706 commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
 707 Author: Trent Piepho <tpiepho@freescale.com>
 708 Date:   Wed Nov 12 17:29:48 2008 -0800
 709
 710     Section name should be ".data", not "data"
 711
 712     Signed-off-by: Trent Piepho <tpiepho@freescale.com>
 713     Signed-off-by: Wolfgang Denk <wd@denx.de>
 714
 715 commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
 716 Author: Wolfgang Denk <wd@denx.de>
 717 Date:   Tue Dec 9 00:39:08 2008 +0100
 718
 719     MAKEALL: Automatically use parallel builds
 720
 721     Add logic to the MAKEALL script to determine the number of CPU cores
 722     on the system, and run a parallel build if there is more than one.
 723     Usually this significantrly accelerates builds.
 724
 725     Allow to manually adjust the number of parallel make jobs by using
 726     the "BUILD_NCPUS" environment variable.
 727
 728     Signed-off-by: Wolfgang Denk <wd@denx.de>
 729
 730 commit 268405fa7c44156c5192a70779920c70906af8d6
 731 Author: Wolfgang Denk <wd@denx.de>
 732 Date:   Tue Dec 9 00:24:30 2008 +0100
 733
 734     vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
 735
 736     Signed-off-by: Wolfgang Denk <wd@denx.de>
 737
 738 commit 153176a9414120ca1736f3cc4951623d6e14e6af
 739 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 740 Date:   Tue Nov 11 06:08:59 2008 +0100
 741
 742     avr32/bootm: remove unused variable 'ret'
 743
 744     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 745     Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
 746
 747 commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
 748 Author: Peter Tyser <ptyser@xes-inc.com>
 749 Date:   Wed Nov 12 13:06:48 2008 -0600
 750
 751     Remove unneeded CONFIG_SHELL references
 752
 753     Make should be using the bash shell by default which makes
 754     CONFIG_SHELL unnecessary
 755
 756     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
 757
 758 commit cf7a7b99794bac936899819b95539be1dbd71708
 759 Author: Peter Tyser <ptyser@xes-inc.com>
 760 Date:   Wed Nov 12 12:33:20 2008 -0600
 761
 762     Use bash for default GNU Make shell application
 763
 764     Some Make script commands rely on bash-specific features like brace
 765     expansion, so default to bash for the SHELL variable with a fallback
 766     to the standard sh shell
 767
 768     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
 769
 770 commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
 771 Author: Heiko Schocher <hs@denx.de>
 772 Date:   Wed Nov 12 09:50:45 2008 +0100
 773
 774     jffs2: rename devices_init () in common/jffs2.c
 775
 776     rename devices_init () in common/jffs2.c to
 777     jffs2_devices_init (), because there is also a
 778     devices_init () in common/devices.c.
 779
 780     Signed-off-by: Heiko Schocher <hs@denx.de>
 781
 782 commit af5eb847a10f1037590001355d88bab3fe7be48b
 783 Author: Daniel Hellstrom <daniel@gaisler.com>
 784 Date:   Mon Nov 10 12:46:20 2008 +0000
 785
 786     SPARC: Fixed compiler error introduced by commit c160a9544743
 787
 788     This patch fixes a build error for the SPARC platform. It was
 789     introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
 790
 791     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
 792
 793 commit 4c60259899aa00f59db0d936b8807f9a26411c0f
 794 Author: Gary Jennejohn <garyj@denx.de>
 795 Date:   Sun Nov 9 12:50:59 2008 +0100
 796
 797     mgsuvd add the board-specific part of the HDLC driver
 798
 799     Signed-off-by: Gary Jennejohn <garyj@denx.de>
 800
 801 commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
 802 Author: Gary Jennejohn <garyj@denx.de>
 803 Date:   Sun Nov 9 12:45:03 2008 +0100
 804
 805     mgcoge add the board-specific part of the HDLC driver
 806
 807     Signed-off-by: Gary Jennejohn <garyj@denx.de>
 808
 809 commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
 810 Author: Gary Jennejohn <garyj@denx.de>
 811 Date:   Sun Nov 9 12:36:15 2008 +0100
 812
 813     keymile add the common parts of the HDLC driver
 814
 815     This implements the ICN protocol used across the backplane and is
 816     needed by all the keymile boards.
 817
 818     Signed-off-by: Gary Jennejohn <garyj@denx.de>
 819
 820 commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
 821 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 822 Date:   Fri Nov 7 22:46:22 2008 +0100
 823
 824     drivers/bios_emulator: Move conditional compilation to Makefile
 825
 826     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 827
 828 commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
 829 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
 830 Date:   Thu Nov 6 14:01:51 2008 -0500
 831
 832     common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
 833
 834     Corrected endian order printing for compact flash serial number.
 835
 836     Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
 837
 838 commit 16a28ef219c27423a1ef502f19070c4d375079b8
 839 Author: Gary Jennejohn <garyj@denx.de>
 840 Date:   Thu Nov 6 15:04:23 2008 +0100
 841
 842     IOMUX: Add console multiplexing support.
 843
 844     Modifications to support console multiplexing.  This is controlled using
 845     CONFIG_SYS_CONSOLE_MUX in the board configuration file.
 846
 847     This allows a user to specify multiple console devices in the environment
 848     with a command like this: setenv stdin serial,nc.  As a result, the user can
 849     enter text on both the serial and netconsole interfaces.
 850
 851     All devices - stdin, stdout and stderr - can be set in this manner.
 852
 853     1) common/iomux.c and include/iomux.h contain the environment setting
 854     implementation.
 855     2) doc/README.iomux contains a somewhat more detailed description.
 856     3) The implementation in (1) is called from common/cmd_nvedit.c to
 857     handle setenv and from common/console.c to handle initialization of
 858     input/output devices at boot time.
 859     4) common/console.c also contains the code needed to poll multiple console
 860     devices for input and send output to all devices registered for output.
 861     5) include/common.h includes iomux.h and common/Makefile generates iomux.o
 862     when CONFIG_SYS_CONSOLE_MUX is set.
 863
 864     Signed-off-by: Gary Jennejohn <garyj@denx.de>
 865
 866 commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
 867 Author: Mike Frysinger <vapier@gentoo.org>
 868 Date:   Tue Nov 4 16:03:46 2008 -0500
 869
 870     strings: use puts() rather than printf()
 871
 872     When running `strings` on really long strings, the stack tends to get
 873     smashed due to printf().  Switch to puts() instead since we're only passing
 874     the data through.
 875
 876     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
 877
 878 commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
 879 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
 880 Date:   Mon Nov 3 22:16:18 2008 +0100
 881
 882     Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
 883
 884     Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
 885
 886 commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
 887 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
 888 Date:   Mon Nov 3 22:15:34 2008 +0100
 889
 890     cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
 891
 892     - fix size too small by one in sprintf
 893     - changed old (pre 2004) device name ibmEmac to emac
 894     - boot device may be overriden in board config
 895     - servername may be defined in board config
 896     - additional parameters may be defined in board config
 897     - fixed some line wrappings
 898     - replaced  redundant MAX define by max
 899
 900     Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
 901
 902 commit e9084b23d16102f44ace24379a1c0c352497ef80
 903 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
 904 Date:   Mon Nov 3 22:14:36 2008 +0100
 905
 906     Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
 907
 908     Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
 909
 910 commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
 911 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
 912 Date:   Mon Nov 3 22:13:47 2008 +0100
 913
 914     README: Document CONFIG_SYS parameters for vxworks
 915
 916     Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
 917
 918 commit ace514837cac656e29c37a19569cb8ea83071126
 919 Author: Peter Tyser <ptyser@xes-inc.com>
 920 Date:   Fri Oct 31 11:12:38 2008 -0500
 921
 922     lcd: Let the board code show board-specific info cleanup
 923
 924     remove unneeded version.h from lcd.c
 925
 926     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
 927     Signed-off-by: Wolfgang Denk <wd@denx.de>
 928
 929 commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
 930 Author: Peter Tyser <ptyser@xes-inc.com>
 931 Date:   Mon Nov 3 09:30:59 2008 -0600
 932
 933     Update U-Boot's build timestamp on every compile
 934
 935     Use the GNU 'date' command to auto-generate a new U-Boot
 936     timestamp on every compile.
 937
 938     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
 939
 940 commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
 941 Author: Remy Bohmer <linux@bohmer.net>
 942 Date:   Thu Dec 4 22:25:57 2008 +0100
 943
 944     Remove redundant armv4 flag from arm926ejs compile flags
 945
 946     Currently the arm926ejs tree has the armv4 option set during compilation.
 947     This flag does not belong here because a arm926 CPU is always a armv5 CPU.
 948
 949     Signed-off-by: Remy Bohmer <linux@bohmer.net>
 950
 951 commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
 952 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
 953 Date:   Sat Dec 6 13:11:14 2008 +0100
 954
 955     at91: Choose environment variables location within make config target
 956
 957     This patch adds the possiblity to choose the media where the environment will
 958     be located. This allow to choose this fundamental configuration without editing
 959     config files.
 960
 961     Documentation file added.
 962
 963     Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
 964     Acked-by: Stelian Pop <stelian@popies.net>
 965     Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 966
 967 commit 1450c4a6682378567030414a9f1198c39b7730c7
 968 Author: Anatolij Gustschin <agust@denx.de>
 969 Date:   Mon Nov 3 15:30:34 2008 +0100
 970
 971     lwmon, tqm8xx: Fix build errors
 972
 973     Commit 6b59e03e0237a40a2305ea385defdfd92000978b
 974     lcd: Let the board code show board-specific info
 975
 976     introduced some bugs which prevent U-Boot building
 977     for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
 978     be defined in the board configuration.
 979
 980     Also "LCD enabled" building for TQM823L doesn't work
 981     since this commit.
 982
 983     This patch fixes above-mentioned issues.
 984
 985     Signed-off-by: Anatolij Gustschin <agust@denx.de>
 986
 987 commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
 988 Author: Mike Frysinger <vapier@gentoo.org>
 989 Date:   Sun Nov 2 01:18:18 2008 -0400
 990
 991     ignore .gdb_history files
 992
 993     When using gdb, history files will often get generated.  So ignore them.
 994
 995     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
 996
 997 commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
 998 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 999 Date:   Fri Oct 31 12:26:55 2008 +0100
1000
1001     FPGA: move fpga drivers to drivers/fpga
1002
1003     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1004
1005 commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
1006 Author: Peter Tyser <ptyser@xes-inc.com>
1007 Date:   Mon Dec 1 16:29:38 2008 -0600
1008
1009     net: Fix TftpStart() ip:filename bug
1010
1011     The TftpStart() function modifies the 'BootFile'
1012     string when 'BootFile' contains both an IP address
1013     and filename (eg 1.2.3.4:/path/file). This causes
1014     subsequent calls to TftpStart to incorrectly parse
1015     the TFTP filename and server IP address to use.
1016     For example:
1017
1018     => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
1019     Speed: 100, half duplex
1020     Using eTSEC1 device
1021     TFTP from server 10.52.0.62; our IP address is 10.52.253.79
1022                      ^^^^^^^^^^ CORRECT
1023     Filename '/home/ptyser/non_existant'.
1024               ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
1025     Load address: 0x100000
1026     Loading: *
1027     TFTP error: 'File not found' (1)
1028     Starting again
1029
1030     eTSEC2: No link.
1031     Speed: 100, half duplex
1032     Using eTSEC1 device
1033     TFTP from server 10.52.0.33; our IP address is 10.52.253.79
1034                      ^^^^^^^^^^ WRONG
1035     Filename '10.52.0.62'.
1036               ^^^^^^^^^^ WRONG
1037     Load address: 0x100000
1038     Loading: *
1039     TFTP error: 'File not found' (1)
1040     Starting again
1041
1042     TftpStart() was modified to not modify the 'BootFile' string.
1043
1044     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1045     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1046
1047 commit d32c5be50bf0600bfdc54223ef341ee9c63db445
1048 Author: Peter Tyser <ptyser@xes-inc.com>
1049 Date:   Mon Dec 1 16:26:21 2008 -0600
1050
1051     net: Add additional IP fragmentation check
1052
1053     Ignore IP packets which have the "more fragments" flag bit
1054     set.  This flag indicates the IP packet is fragmented and
1055     must be ignored by U-Boot.
1056
1057     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1058     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1059
1060 commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
1061 Author: Peter Tyser <ptyser@xes-inc.com>
1062 Date:   Mon Dec 1 16:26:20 2008 -0600
1063
1064     net: Define IP flag field values
1065
1066     These defines were pulled from the "Add simple
1067     IP/UDP fragmentation support" patch from Frank
1068     Haverkamp <haver@vnet.ibm.com>.
1069
1070     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1071     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1072
1073 commit 23afaba65ec5206757e589ef334a8b38168c045f
1074 Author: Anatolij Gustschin <agust@denx.de>
1075 Date:   Tue Dec 2 10:31:04 2008 +0100
1076
1077     net: tsec: Fix Marvell 88E1121R phy init
1078
1079     This patch tries to ensure that phy interrupt pin
1080     won't be asserted after booting. We experienced
1081     following issues with current 88E1121R phy init:
1082
1083     Marvell 88E1121R phy can be hardware-configured
1084     to share MDC/MDIO and interrupt pins for both ports
1085     P0 and P1 (e.g. as configured on socrates board).
1086     Port 0 interrupt pin will be shared by both ports
1087     in such configuration. After booting Linux and
1088     configuring eth0 interface, port 0 phy interrupts
1089     are enabled. After rebooting without proper eth0
1090     interface shutdown port 0 phy interrupts remain
1091     enabled so any change on port 0 (link status, etc.)
1092     cause assertion of the interrupt. Now booting Linux
1093     and configuring eth1 interface will cause permanent
1094     phy interrupt storm as the registered phy 1 interrupt
1095     handler doesn't acknowledge phy 0 interrupts. This
1096     of course should be fixed in Linux driver too.
1097
1098     Signed-off-by: Anatolij Gustschin <agust@denx.de>
1099     Acked-by: Andy Fleming <afleming@freescale.com>
1100     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1101
1102 commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
1103 Author: Peter Tyser <ptyser@xes-inc.com>
1104 Date:   Tue Dec 2 12:59:51 2008 -0600
1105
1106     net: Fix download command parsing
1107
1108     When CONFIG_SYS_HUSH_PARSER is defined network download
1109     commands with 1 argument in the format 'tftp "/path/file"'
1110     do not work as expected. The hush command parser strips
1111     the quotes from "/path/file" which causes the network
1112     commands to interpret "/path/file" as an address
1113     instead of the intended filename.
1114
1115     The previous check for a leading quote in netboot_common()
1116     was replaced with a check which ensures only valid
1117     numbers are treated as addresses.
1118
1119     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1120     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1121
1122 commit 3c2c2f427905040c1513d0c51d637689cba48346
1123 Author: Remy Bohmer <linux@bohmer.net>
1124 Date:   Thu Nov 27 22:30:27 2008 +0100
1125
1126     Remove non-ascii characters from fat code
1127
1128     This code contains some non-ascii characters in comment lines and code.
1129     Most editors do not display those characters properly and editing those
1130     files results always in diffs at these places which are usually not required
1131     to be changed at all. This is error prone.
1132
1133     So, remove those weird characters and replace them by normal C-style
1134     equivalents for which the proper defines were already in the header.
1135
1136     Signed-off-by: Remy Bohmer <linux@bohmer.net>
1137
1138 commit dc889e865356497d3e495570118c2245ebce2631
1139 Author: Dave Liu <daveliu@freescale.com>
1140 Date:   Fri Nov 28 20:16:58 2008 +0800
1141
1142     85xx: fix the wrong DDR settings for MPC8572DS
1143
1144     The default DDR freq is 400MHz or 800M data rate,
1145     the old settings is pure wrong for the default case.
1146
1147     Signed-off-by: Dave Liu <daveliu@freescale.com>
1148     Acked-by: Andy Fleming <afleming@freescale.com>
1149
1150 commit 9df59533f77de2829b4b66e5b7620e04edaa391c
1151 Author: Kumar Gala <galak@kernel.crashing.org>
1152 Date:   Mon Nov 24 10:29:26 2008 -0600
1153
1154     85xx: init gd as early as possible
1155
1156     Moved up the initialization of GD so C code like set_tlb() can use
1157     gd->flags to determine if we've relocated or not in the future.
1158
1159     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1160     Acked-by: Andy Fleming <afleming@freescale.com>
1161
1162 commit aed461af81012a398a205e9be67ab37667491838
1163 Author: Kumar Gala <galak@kernel.crashing.org>
1164 Date:   Mon Nov 24 10:29:25 2008 -0600
1165
1166     85xx: Fix relocation of CCSRBAR
1167
1168     If the virtual address for CCSRBAR is the same after relocation but
1169     the physical address is changing we'd end up having two TLB entries with
1170     the same VA.  Instead we new us the new CCSRBAR virt address + 4k as a
1171     temp virt address to access the old CCSRBAR to relocate it.
1172
1173     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1174     Acked-by: Andy Fleming <afleming@freescale.com>
1175
1176 commit ea154a1781135d822eedee7567cc156089eae93c
1177 Author: Kumar Gala <galak@kernel.crashing.org>
1178 Date:   Mon Nov 24 10:25:14 2008 -0600
1179
1180     FSL: Moved BR_PHYS_ADDR for localbus to common header
1181
1182     The BR_PHYS_ADDR macro is useful on all machines that have local bus
1183     which is pretty much all 83xx/85xx/86xx chips.
1184
1185     Additionally most 85xx & 86xx will need it if they want to support
1186     36-bit physical addresses.
1187
1188     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1189     Acked-by: Andy Fleming <afleming@freescale.com>
1190
1191 commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
1192 Author: Peter Tyser <ptyser@xes-inc.com>
1193 Date:   Mon Dec 1 13:47:12 2008 -0600
1194
1195     85xx: Add PORDEVSR_PCI1 define
1196
1197     Add define used to determine if PCI1 interface is in PCI or PCIX mode.
1198
1199     Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
1200
1201     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1202     Signed-off-by: Andy Fleming <afleming@freescale.com>
1203
1204 commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
1205 Author: Becky Bruce <becky.bruce@freescale.com>
1206 Date:   Fri Nov 21 19:24:22 2008 -0600
1207
1208     drivers/fsl_pci_init: Fix inbound window mapping bug
1209
1210     The current code will cause the creation of a 4GB window
1211     starting at 0 if we have more than 4GB of RAM installed,
1212     which overlaps with PCI_MEM space and causes pci_bus_to_phys()
1213     to return erroneous information. Limit the size to 4GB - 1;
1214     which causes the code to create one 2GB and one 1GB window
1215     instead.
1216
1217     Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
1218     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1219     Acked-by: Andy Fleming <afleming@freescale.com>
1220
1221 commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
1222 Author: Jon Loeliger <jdl@freescale.com>
1223 Date:   Thu Nov 20 15:36:48 2008 -0600
1224
1225     Removed unused CONFIG_L1_INIT_RAM symbol.
1226
1227     Prevent further viral propogation of the unused
1228     symbol CONFIG_L1_INIT_RAM by just removing it.
1229
1230     Signed-off-by: Jon Loeliger <jdl@freescale.com>
1231     Acked-by: Andy Fleming <afleming@freescale.com>
1232
1233 commit 7008d26a40a76f90cae5824c812cfed449fb97b8
1234 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1235 Date:   Wed Oct 29 09:21:44 2008 -0500
1236
1237     fsl ddr skip interleaving if not supported.
1238
1239     Removed while(1) hang if memctl_intlv_ctl is set wrong.
1240     Remove embedded tabs from strings.
1241
1242     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1243     Acked-by: Kumar Gala <galak@kernel.crashing.org>
1244     Acked-by: Andy Fleming <afleming@freescale.com>
1245
1246 commit dd332e18d082de75eca3fc2c7c778f5d4571a096
1247 Author: Anatolij Gustschin <agust@denx.de>
1248 Date:   Thu Nov 13 18:08:57 2008 +0100
1249
1250     85xx: socrates: fix DDR SDRAM tlb entry configuration
1251
1252     since commit be0bd8234b9777ecd63c4c686f72af070d886517
1253     tlb entry for socrates DDR SDRAM will be reconfigured
1254     by setup_ddr_tlbs() from initdram() causing an
1255     inconsistency with previously configured DDR SDRAM tlb
1256     entry from tlb_table:
1257
1258     socrates>l2cam 7 9
1259     IDX  PID      EPN  SIZE V TS           RPN U0-U3 WIMGE UUUSSS
1260       7 : 00 00000000 256MB V  0 -> 0_00000000  0000 -I-G- ---RWX
1261       8 : 00 00000000 256MB V  0 -> 0_00000000  0000 ----- ---RWX
1262       9 : 00 10000000 256MB V  0 -> 0_10000000  0000 ----- ---RWX
1263
1264     This patch makes the presence of the DDR SDRAM tlb entry in
1265     the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
1266     inconsistency.
1267
1268     Signed-off-by: Anatolij Gustschin <agust@denx.de>
1269     Acked-by: Andy Fleming <afleming@freescale.com>
1270
1271 commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
1272 Author: Peter Tyser <ptyser@xes-inc.com>
1273 Date:   Tue Nov 11 10:17:10 2008 -0600
1274
1275     85xx: Add CPU 2 errata workaround to all 8548 boards
1276
1277     All mpc8548-based boards should implement the suggested workaround
1278     to CPU 2 errata. Without the workaround, its possible for the
1279     8548's core to hang while executing a msync or mbar 0 instruction
1280     and a snoopable transaction from an I/O master tagged to make
1281     quick forward progress is present.
1282
1283     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1284     Acked-by: Andy Fleming <afleming@freescale.com>
1285
1286 commit e57f0fa1333cdf3ca36110aac2900712a5f82976
1287 Author: Dave Liu <daveliu@freescale.com>
1288 Date:   Tue Oct 28 17:53:45 2008 +0800
1289
1290     85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
1291
1292     we need TLB entry for DDR at !SPD case.
1293
1294     Signed-off-by: Dave Liu <daveliu@freescale.com>
1295     Acked-by: Andy Fleming <afleming@freescale.com>
1296
1297 commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
1298 Author: Dave Liu <daveliu@freescale.com>
1299 Date:   Tue Oct 28 17:53:38 2008 +0800
1300
1301     85xx: remove the unused ddr_enable_ecc in the board file
1302
1303     The DDR controller of 8548/8544/8568/8572/8536 processors
1304     have the ECC data init feature, and the new DDR code is
1305     using the feature, and we don't need the way with DMA to
1306     init memory any more.
1307
1308     Signed-off-by: Dave Liu <daveliu@freescale.com>
1309     Acked-by: Andy Fleming <afleming@freescale.com>
1310
1311 commit 4a129a57d923f7c15aa1f567028a80a32d66a100
1312 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1313 Date:   Sun Nov 30 19:36:53 2008 +0100
1314
1315     at91rm9200dk: Fix typo
1316
1317     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1318
1319 commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
1320 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1321 Date:   Sun Nov 30 19:36:50 2008 +0100
1322
1323     AT91: remove non supported board AT91RM9200DF macro
1324
1325     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1326
1327 commit bd876772ee04095e5dd943d97515a1f14bad4b1c
1328 Author: Ilko Iliev <iliev@ronetix.at>
1329 Date:   Tue Dec 2 17:27:54 2008 +0100
1330
1331     mtd/dataflash.c: fix a problem with the last partition
1332
1333     This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
1334     partition can be defined to use the area to the end of dataflash size.
1335     Now it is possible to have only one dataflash partition from 0 to the end
1336     of of dataflash size.
1337
1338     Signed-off-by: Ilko Iliev <iliev@ronetix.at>
1339
1340 commit 03f797793b124dccaae145b977d15d6cb9e74504
1341 Author: Ilko Iliev <iliev@ronetix.at>
1342 Date:   Tue Dec 2 17:20:17 2008 +0100
1343
1344     fix some coding style violations.
1345
1346     This patch fix some coding style violations.
1347
1348     Signed-off-by: Ilko Iliev <iliev@ronetix.at>
1349
1350 commit 5e46b1e54112f4b7fd5185665e571510132c12a7
1351 Author: Stefan Roese <sr@denx.de>
1352 Date:   Thu Nov 27 14:11:37 2008 +0100
1353
1354     OneNAND: Add missing mtd info struct before calling onenand_erase()
1355
1356     Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
1357     for use in UBI) via CONFIG_MTD_PARTITIONS.
1358
1359     Signed-off-by: Stefan Roese <sr@denx.de>
1360     Signed-off-by: Scott Wood <scottwood@freescale.com>
1361
1362 commit 29382d4064fbaff5daacff4c3209370fa5713966
1363 Author: Becky Bruce <becky.bruce@freescale.com>
1364 Date:   Thu Nov 20 16:43:52 2008 -0600
1365
1366     mpc8641: Fix error in README
1367
1368     I made some updates to the code that didn't make it into the
1369     README - fix this
1370
1371     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1372
1373 commit 801a194616d95e6fc426a176d9615ccbf9876c7f
1374 Author: Jon Loeliger <jdl@freescale.com>
1375 Date:   Thu Nov 20 12:01:02 2008 -0600
1376
1377     Removed unused CONFIG_L1_INIT_RAM symbol.
1378
1379     Prevent further viral propogation of the unused
1380     symbol CONFIG_L1_INIT_RAM by just removing it.
1381
1382     Signed-off-by: Jon Loeliger <jdl@freescale.com>
1383
1384 commit f698738e46cb461e28c2d58228bb34a2fcf5a475
1385 Author: Jon Loeliger <jdl@freescale.com>
1386 Date:   Thu Nov 20 14:02:56 2008 -0600
1387
1388     86xx: Fix non-64-bit compilation problems.
1389
1390     Introducing 64-bit (36-bit) support for the MPC8641HPCN
1391     failed to accomodate the other two 86xx boards.
1392     Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
1393     CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
1394     with nominal 32-bit values.
1395
1396     Signed-off-by: Jon Loeliger <jdl@freescale.com>
1397     Acked-by: Becky Bruce <becky.bruce@freescale.com>
1398
1399 commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
1400 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
1401 Date:   Wed Nov 26 17:40:37 2008 +0100
1402
1403     Remove obsolete command (apply afte USB style patch, 80 chars strict)
1404
1405     Remove USB obsolete commmand
1406
1407     Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
1408     Signed-off-by: Remy Böhmer <linux@bohmer.net>
1409
1410 commit de39f8c19d7c12017248c49d432dcb81db68f724
1411 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
1412 Date:   Wed Nov 26 17:41:34 2008 +0100
1413
1414     USB style patch, 80 chars strict
1415
1416     USB Code style patch
1417
1418     Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
1419     Signed-off-by: Remy Böhmer <linux@bohmer.net>
1420
1421 commit d10c5a87cb8affbb4d35a311370316d4383d598e
1422 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1423 Date:   Fri Nov 7 22:46:21 2008 +0100
1424
1425     drivers/usb: Move conditional compilation to Makefile
1426
1427     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1428     Signed-off-by: Remy Böhmer <linux@bohmer.net>
1429
1430 commit 2077e348c2a84901022ad95311b47b70361e6daa
1431 Author: Scott Wood <scottwood@freescale.com>
1432 Date:   Tue Nov 25 10:47:02 2008 -0600
1433
1434     NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
1435
1436     This caused the operation to be needlessly repeated if there were
1437     no bad blocks and no errors.
1438
1439     Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
1440     Signed-off-by: Scott Wood <scottwood@freescale.com>
1441
1442 commit 89295028e7d8f7a524f485328279d72fdb102385
1443 Author: Michal Simek <monstr@monstr.eu>
1444 Date:   Mon Nov 24 12:09:50 2008 +0100
1445
1446     ppc4xx: ml300 remove Xilinx BSP from ml300 folder
1447
1448     This BSP should be outside u-boot source tree.
1449     The second reason is that xilinx ppc405 was moved to generic platform.
1450
1451     Signed-off-by: Michal Simek <monstr@monstr.eu>
1452     Signed-off-by: Stefan Roese <sr@denx.de>
1453
1454 commit 24eea623d4974a169026a975ba12fb23d48154b1
1455 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1456 Date:   Mon Nov 24 15:11:10 2008 +0100
1457
1458     ppc4xx: Remove unused features
1459
1460     This patch disables some unused features from the PCI405 configuration
1461     to keep U-Boot image size below 192k.
1462
1463     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1464     Signed-off-by: Stefan Roese <sr@denx.de>
1465
1466 commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
1467 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1468 Date:   Mon Nov 24 15:11:09 2008 +0100
1469
1470     ppc4xx: Use correct io accessors for PCI405
1471
1472     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1473     Signed-off-by: Stefan Roese <sr@denx.de>
1474
1475 commit 348c849d86a6f0785752b9bc497a34658713d1d1
1476 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1477 Date:   Mon Nov 24 15:11:08 2008 +0100
1478
1479     ppc4xx: Remove unused code from PCI405 code
1480
1481     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1482     Signed-off-by: Stefan Roese <sr@denx.de>
1483
1484 commit 58c696eed839af894e0265064669c402dc28b371
1485 Author: Wolfgang Denk <wd@xpert.denx.de>
1486 Date:   Mon Nov 24 21:50:59 2008 +0100
1487
1488     AT91RM9200DK: fix broken boot from NOR flash
1489
1490     Signed-off-by: Wolfgang Denk <wd@denx.de>
1491
1492 commit 8052352f20b33bef8f9872fc983eac73d4693c38
1493 Author: Jens Scharsig <esw@bus-elektronik.de>
1494 Date:   Tue Nov 18 10:48:46 2008 +0100
1495
1496     at91rm9200: fix broken boot from nor flash
1497
1498     This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
1499     CONFIG_AT91RM9200 is defined and nor preloader is used.
1500
1501     Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
1502
1503 commit 25ea652e907516a283b38237e83712a918f125d7
1504 Author: Piotr Ziecik <kosmo@semihalf.com>
1505 Date:   Mon Nov 17 15:58:00 2008 +0100
1506
1507     UBI: Add proof-of-concept CFI flash support
1508
1509     With this patch UBI can be used on CFI flash chips.
1510
1511     Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
1512     Signed-off-by: Stefan Roese <sr@denx.de>
1513
1514 commit e6a7edbc1778d27431ac663b40a71dafa5d20578
1515 Author: Piotr Ziecik <kosmo@semihalf.com>
1516 Date:   Mon Nov 17 15:57:59 2008 +0100
1517
1518     mtd: Remove a printf() from add_mtd_device().
1519
1520     Remove a printf() from add_mtd_device(), which produces spurious output.
1521
1522     Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
1523     Signed-off-by: Stefan Roese <sr@denx.de>
1524
1525 commit 91809ed51d8327a8dbbf29aa98a091154c282171
1526 Author: Piotr Ziecik <kosmo@semihalf.com>
1527 Date:   Mon Nov 17 15:57:58 2008 +0100
1528
1529     cfi-mtd: Add cfi-mtd driver.
1530
1531     Add cfi-mtd driver, which exports CFI flash to MTD layer.
1532     This allows CFI flash devices to be used from MTD layer.
1533
1534     Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
1535     option. Initialization is done by calling cfi_mtd_init() from
1536     flash_init().
1537
1538     Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
1539     Signed-off-by: Stefan Roese <sr@denx.de>
1540
1541 commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
1542 Author: Piotr Ziecik <kosmo@semihalf.com>
1543 Date:   Mon Nov 17 15:49:32 2008 +0100
1544
1545     cfi_flash: Add interface for flash verbosity control
1546
1547     Add interface for flash verbosity control. It allows
1548     to disable output from low-level flash API. It is useful
1549     when calling these low-level functions from context other
1550     than flash commands (for example the MTD/CFI interface
1551     implmentation).
1552
1553     Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
1554     Signed-off-by: Stefan Roese <sr@denx.de>
1555
1556 commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
1557 Author: Piotr Ziecik <kosmo@semihalf.com>
1558 Date:   Thu Nov 20 15:17:38 2008 +0100
1559
1560     cfi_flash: Export flash_sector_size() function.
1561
1562     Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
1563     so that it can be used in the upcoming cfi-mtd driver.
1564
1565     Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
1566     Signed-off-by: Stefan Roese <sr@denx.de>
1567
1568 commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
1569 Author: Stefan Roese <sr@denx.de>
1570 Date:   Mon Nov 17 14:45:22 2008 +0100
1571
1572     cfi_flash: Make all flash access functions weak
1573
1574     This patch defines all flash access functions as weak so that
1575     they can be overridden by board specific versions.
1576
1577     This will be used by the upcoming VCTH board support where the NOR
1578     FLASH unfortunately can't be accessed memory-mapped. Special
1579     accessor functions are needed here.
1580
1581     To enable this weak functions you need to define
1582     CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
1583     Otherwise the "old" default functions will be used resulting
1584     in smaller code.
1585
1586     Signed-off-by: Stefan Roese <sr@denx.de>
1587     Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1588
1589 commit a5c4067017631d903e1afa6ad615f0ce19fea517
1590 Author: Stefan Roese <sr@denx.de>
1591 Date:   Mon Nov 24 08:31:16 2008 +0100
1592
1593     UBI: Change parsing of size in commands to default to hex
1594
1595     Currently the size parameters of the UBI commands (e.g. "ubi write") are
1596     decoded as decimal instead of hex as default. This patch now interprets
1597     all these values consistantly as hex, as all other standard U-Boot commands
1598     do.
1599
1600     Signed-off-by: Stefan Roese <sr@denx.de>
1601
1602 commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
1603 Author: Stefan Roese <sr@denx.de>
1604 Date:   Fri Nov 21 13:06:06 2008 +0100
1605
1606     ppc4xx: ML2 shouldn't include the 4xx EMAC driver
1607
1608     Signed-off-by: Stefan Roese <sr@denx.de>
1609
1610 commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
1611 Author: Yuri Tikhonov <yur@emcraft.com>
1612 Date:   Fri Nov 14 16:19:19 2008 +0300
1613
1614     ppc4xx: katmai: Change default config
1615
1616      This patch enables support for EXT2, and increases the
1617     CONFIG_SYS_BOOTMAPSZ size for the default configuration
1618     of the katmai boards to use them as the RAID-reference
1619     AMCC setups.
1620
1621      EXT2 enabling allows one to boot kernels from the EXT2
1622     formatted Compact Flash cards.
1623
1624      CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
1625     Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
1626     the memory area with DTB file (which is placed at the
1627     end of the bootmap area) will turn out to be overlapped
1628     with the BSS segment of the 256KB kernel, and zeroed
1629     in early_init() of Linux.
1630
1631      Actually, increasing of the bootmap size could be done
1632     via setting of the bootm_size U-Boot variable, but it looks
1633     like the current U-Boot implementation have some bootm_size-
1634     related functionality lost. In many places through the U-Boot
1635     code the CONFIG_SYS_BOOTMAPSZ definition is used directly
1636     (instead of trying to read the corresponding value from the
1637     environment). The same is truth for the boot_jump_linux()
1638     function in lib_ppc/bootm.c, where U-Boot transfers control
1639     to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
1640     value to the booting kernel.
1641
1642     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
1643     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
1644     Signed-off-by: Stefan Roese <sr@denx.de>
1645
1646 commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
1647 Author: Dave Mitchell <dmitch71@gmail.com>
1648 Date:   Thu Nov 20 14:09:50 2008 -0600
1649
1650     ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
1651
1652     Expanded OCM TLB to allow access to 64K OCM as well as 256K of
1653     internal SRAM.
1654
1655     Adjusted internal SRAM initialization to match updated user
1656     manual recommendation.
1657
1658     OCM & ISRAM are now mapped as follows:
1659             physical        virtual         size
1660     ISRAM   0x4_0000_0000   0xE300_0000     256k
1661     OCM     0x4_0004_0000   0xE304_0000     64k
1662
1663     A single TLB was used for this mapping.
1664
1665     Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
1666     Signed-off-by: Stefan Roese <sr@denx.de>
1667
1668 commit b14ca4b61a681f75f3125676e09d7ce6af66e927
1669 Author: Dave Mitchell <dmitch71@gmail.com>
1670 Date:   Thu Nov 20 14:00:49 2008 -0600
1671
1672     ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
1673
1674     Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
1675     L2 cache DCRs from ppc440.h to this new header.
1676
1677     Also converted these DCR defines from lowercase to uppercase and
1678     modified referencing modules to use them.
1679
1680     Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
1681     Signed-off-by: Stefan Roese <sr@denx.de>
1682
1683 commit 711e2b2af820d21d9931d4cf8057d3894600fd54
1684 Author: Steven A. Falco <sfalco@harris.com>
1685 Date:   Thu Nov 20 14:37:57 2008 -0500
1686
1687     ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
1688
1689     The definitions of bits in SDR_CFG are incorrect, and not used within
1690     U-Boot.  Therefore, they can be removed.
1691
1692     The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
1693     and are unused, so they can be removed too.
1694
1695     A definition for SDR0_DDRCFG is added.
1696
1697     Signed-off-by: Steven A. Falco <sfalco@harris.com>
1698     Signed-off-by: Stefan Roese <sr@denx.de>
1699
1700 commit e23c7c95a96eb0f068efe5c532215a10a1512a95
1701 Author: Dirk Behme <dirk.behme@gmail.com>
1702 Date:   Mon Nov 10 20:15:25 2008 +0100
1703
1704     ARM: OMAP: Convert IO macros
1705
1706     Convert IO macros to readx/writex.
1707
1708     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
1709
1710 commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
1711 Author: Ilko Iliev <iliev@ronetix.at>
1712 Date:   Sun Nov 9 15:53:14 2008 +0100
1713
1714     lib_arm: do_bootm_linux() - correct a small mistake
1715
1716     This patch corrects a small bug in the "if" condition:
1717     the parameter "flag" is 0 and the "if" condition is always true.
1718     The result is - the boom command doesn't start the kernel.
1719     Affected targets: all arm based.
1720
1721     Signed-off-by: Ilko Iliev <iliev@ronetix.at>
1722
1723 commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
1724 Author: Stelian Pop <stelian@popies.net>
1725 Date:   Sun Nov 9 00:14:46 2008 +0100
1726
1727     AT91: Enable PLLB for USB
1728
1729     At least some (old ?) versions of the AT91Bootstrap do not set up the
1730     PLLB correctly to 48 MHz in order to make USB host function correctly.
1731
1732     This patch sets up the PLLB to the same values Linux uses, and makes USB
1733     work ok on the following CPUs:
1734         - AT91CAP9
1735         - AT91SAM9260
1736         - AT91SAM9263
1737
1738     This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
1739     the relevant AT91CAP9/AT91SAM9 atmel boards.
1740
1741     Signed-off-by: Stelian Pop <stelian@popies.net>
1742     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1743
1744 commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
1745 Author: Stelian Pop <stelian@popies.net>
1746 Date:   Fri Nov 7 13:55:14 2008 +0100
1747
1748     AT91: Use AT91_CPU_CLOCK in displays
1749
1750     Introduce AT91_CPU_CLOCK and use it for displaying the CPU
1751     speed in the LCD driver.
1752
1753     Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
1754     corresponding board clocks.
1755
1756     Signed-off-by: Stelian Pop <stelian@popies.net>
1757
1758 commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
1759 Author: Stefan Roese <sr@denx.de>
1760 Date:   Thu Nov 20 11:46:20 2008 +0100
1761
1762     ppc4xx: Clear all potentially pending exceptions in MCSR
1763
1764     This is needed on Canyonlands which still has an exception pending
1765     while running relocate_code(). This leads to a failure after trap_init()
1766     is moved to the top of board_init_r().
1767
1768     Signed-off-by: Stefan Roese <sr@denx.de>
1769
1770 commit facdad5f2602e899a01746916beddbf9e856b5ee
1771 Author: Heiko Schocher <hs@denx.de>
1772 Date:   Wed Nov 19 10:10:30 2008 +0100
1773
1774     powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
1775
1776     Signed-off-by: Heiko Schocher <hs@denx.de>
1777     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1778
1779 commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
1780 Author: Howard Gregory <Greg.Howard@freescale.com>
1781 Date:   Tue Nov 4 14:55:33 2008 +0800
1782
1783     mpc83xx: Improve the performance of DDR memory
1784
1785     modify the CAS timings. my understanding is that these
1786     settings decrease various wait times in the DDR interface.
1787     Because these wait times are in clock cycles, and the DDR
1788     clock on the 8315 RDB runs slower than on some other 83xx
1789     platforms, we can dial down these values without a problem,
1790     thereby decreasing the latency of memory a little.
1791
1792     Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
1793     Signed-off-by: Dave Liu <daveliu@freescale.com>
1794     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1795
1796 commit 8000b086b33a5a81f3f390f37e178db7956dc08b
1797 Author: Kyungmin Park <kyungmin.park@samsung.com>
1798 Date:   Fri Oct 24 14:55:33 2008 +0200
1799
1800     ARM: Add Apollon UBI support
1801
1802     To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
1803     macro.
1804
1805     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1806     Signed-off-by: Stefan Roese <sr@denx.de>
1807
1808 commit 694a0b3f1c0accd0de94b89555155d69f8022824
1809 Author: Kyungmin Park <kyungmin.park@samsung.com>
1810 Date:   Wed Nov 19 11:47:05 2008 +0100
1811
1812     UBI: Add UBI command support
1813
1814     This patch adds these UBI commands:
1815
1816     ubi part [nand|onenand] [part] - Show or set current partition
1817     ubi info [l[ayout]] -Display volume and UBI layout information
1818     ubi create[vol] volume [size] [type] - Create volume name with size
1819     ubi write[vol] address volume size - Write volume from address with size
1820     ubi read[vol] address volume [size] - Read volume to address with size
1821     ubi remove[vol] volume - Remove volume
1822
1823     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1824     Signed-off-by: Stefan Roese <sr@denx.de>
1825
1826 commit 58be3a1056d88c6d05f3e914389282807e69923a
1827 Author: Kyungmin Park <kyungmin.park@samsung.com>
1828 Date:   Wed Nov 19 16:38:24 2008 +0100
1829
1830     UBI: Add basic UBI support to U-Boot (Part 8/8)
1831
1832     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1833     It's based on the Linux UBI version and basically has a "OS"
1834     translation wrapper that defines most Linux specific calls
1835     (spin_lock() etc.) into no-ops. Some source code parts have been
1836     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1837     this version with the Linux version and simplifies future UBI
1838     ports/bug-fixes from the Linux version.
1839
1840     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1841     Signed-off-by: Stefan Roese <sr@denx.de>
1842
1843 commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
1844 Author: Kyungmin Park <kyungmin.park@samsung.com>
1845 Date:   Wed Nov 19 16:36:36 2008 +0100
1846
1847     UBI: Add basic UBI support to U-Boot (Part 7/8)
1848
1849     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1850     It's based on the Linux UBI version and basically has a "OS"
1851     translation wrapper that defines most Linux specific calls
1852     (spin_lock() etc.) into no-ops. Some source code parts have been
1853     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1854     this version with the Linux version and simplifies future UBI
1855     ports/bug-fixes from the Linux version.
1856
1857     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1858     Signed-off-by: Stefan Roese <sr@denx.de>
1859
1860 commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
1861 Author: Kyungmin Park <kyungmin.park@samsung.com>
1862 Date:   Wed Nov 19 16:32:36 2008 +0100
1863
1864     UBI: Add basic UBI support to U-Boot (Part 6/8)
1865
1866     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1867     It's based on the Linux UBI version and basically has a "OS"
1868     translation wrapper that defines most Linux specific calls
1869     (spin_lock() etc.) into no-ops. Some source code parts have been
1870     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1871     this version with the Linux version and simplifies future UBI
1872     ports/bug-fixes from the Linux version.
1873
1874     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1875     Signed-off-by: Stefan Roese <sr@denx.de>
1876
1877 commit c91a719daa331b5856109313371e4ece5ec06d96
1878 Author: Kyungmin Park <kyungmin.park@samsung.com>
1879 Date:   Wed Nov 19 16:28:06 2008 +0100
1880
1881     UBI: Add basic UBI support to U-Boot (Part 5/8)
1882
1883     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1884     It's based on the Linux UBI version and basically has a "OS"
1885     translation wrapper that defines most Linux specific calls
1886     (spin_lock() etc.) into no-ops. Some source code parts have been
1887     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1888     this version with the Linux version and simplifies future UBI
1889     ports/bug-fixes from the Linux version.
1890
1891     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1892     Signed-off-by: Stefan Roese <sr@denx.de>
1893
1894 commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
1895 Author: Kyungmin Park <kyungmin.park@samsung.com>
1896 Date:   Wed Nov 19 16:27:23 2008 +0100
1897
1898     UBI: Add basic UBI support to U-Boot (Part 4/8)
1899
1900     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1901     It's based on the Linux UBI version and basically has a "OS"
1902     translation wrapper that defines most Linux specific calls
1903     (spin_lock() etc.) into no-ops. Some source code parts have been
1904     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1905     this version with the Linux version and simplifies future UBI
1906     ports/bug-fixes from the Linux version.
1907
1908     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1909     Signed-off-by: Stefan Roese <sr@denx.de>
1910
1911 commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
1912 Author: Kyungmin Park <kyungmin.park@samsung.com>
1913 Date:   Wed Nov 19 16:26:54 2008 +0100
1914
1915     UBI: Add basic UBI support to U-Boot (Part 3/8)
1916
1917     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1918     It's based on the Linux UBI version and basically has a "OS"
1919     translation wrapper that defines most Linux specific calls
1920     (spin_lock() etc.) into no-ops. Some source code parts have been
1921     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1922     this version with the Linux version and simplifies future UBI
1923     ports/bug-fixes from the Linux version.
1924
1925     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1926     Signed-off-by: Stefan Roese <sr@denx.de>
1927
1928 commit 961df83361aff9a14f226214224eb8a06e05ba24
1929 Author: Kyungmin Park <kyungmin.park@samsung.com>
1930 Date:   Wed Nov 19 16:25:44 2008 +0100
1931
1932     UBI: Add basic UBI support to U-Boot (Part 2/8)
1933
1934     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1935     It's based on the Linux UBI version and basically has a "OS"
1936     translation wrapper that defines most Linux specific calls
1937     (spin_lock() etc.) into no-ops. Some source code parts have been
1938     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1939     this version with the Linux version and simplifies future UBI
1940     ports/bug-fixes from the Linux version.
1941
1942     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1943     Signed-off-by: Stefan Roese <sr@denx.de>
1944
1945 commit f399d4a281713d5ef2d764f05d545fe61e3bd569
1946 Author: Kyungmin Park <kyungmin.park@samsung.com>
1947 Date:   Wed Nov 19 16:23:06 2008 +0100
1948
1949     UBI: Add basic UBI support to U-Boot (Part 1/8)
1950
1951     This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
1952     It's based on the Linux UBI version and basically has a "OS"
1953     translation wrapper that defines most Linux specific calls
1954     (spin_lock() etc.) into no-ops. Some source code parts have been
1955     uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
1956     this version with the Linux version and simplifies future UBI
1957     ports/bug-fixes from the Linux version.
1958
1959     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1960     Signed-off-by: Stefan Roese <sr@denx.de>
1961
1962 commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
1963 Author: Kyungmin Park <kyungmin.park@samsung.com>
1964 Date:   Wed Nov 19 16:20:36 2008 +0100
1965
1966     MTD: Add MTD paritioning infrastructure
1967
1968     This MTD part infrastructure will be used by the upcoming
1969     UBI support.
1970
1971     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1972     Signed-off-by: Stefan Roese <sr@denx.de>
1973
1974 commit 9b827cf1720acda2473afa516956eab6f7cca9a1
1975 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
1976 Date:   Thu Oct 16 22:54:03 2008 +0530
1977
1978     Align end of bss by 4 bytes
1979
1980     Most of the bss initialization loop increments 4 bytes
1981     at a time. And the loop end is checked for an 'equal'
1982     condition. Make the bss end address aligned by 4, so
1983     that the loop will end as expected.
1984
1985     Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
1986     Signed-off-by: Wolfgang Denk <wd@denx.de>
1987
1988 commit 3f510db522d160179dff3ddcce9b18f6241c2c24
1989 Author: Becky Bruce <becky.bruce@freescale.com>
1990 Date:   Mon Nov 10 19:45:35 2008 -0600
1991
1992     mpc8641: fix address-cells default in old .dts detection
1993
1994     address-cells defaults to 2, not 1; so in the unlikely
1995     event that it isn't specified, this patch is required
1996     for correct operation.
1997
1998     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1999
2000 commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
2001 Author: Becky Bruce <becky.bruce@freescale.com>
2002 Date:   Fri Oct 31 17:14:39 2008 -0500
2003
2004     lib_ppc: Move trap_init to occur earlier
2005
2006     Doing trap_init immediately once we're running from RAM
2007     means we're no longer dependent on the physical location of
2008     the flash on non-BookE platforms. Before trap_init, those
2009     platforms switch to real mode and go to 0xfff00100 on exception.
2010     After the switch, they go to 0x00000100  This makes it easier to
2011     move the flash location.
2012
2013     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2014
2015 commit d52082b12c6e545705a19433a2f4142526536189
2016 Author: Becky Bruce <becky.bruce@freescale.com>
2017 Date:   Fri Nov 7 13:46:19 2008 -0600
2018
2019     mpc8641: Try to detect old .dts files
2020
2021     Since we've changed the memory map of the board, be nice and
2022     add some checking to try to catch out-of-date .dts files.  We do
2023     this by checking the CCSRBAR location in the .dts and comparing
2024     it to the CCSRBAR location in u-boot.  If they don't match, a
2025     warning msg is printed.  This isn't foolproof, but it's simple and
2026     will catch most of the cases where an out-of-date .dts is present,
2027     including all of the cases where a new u-boot is used with an old
2028     standard MPC8641 .dts file as supplied with Linux.
2029
2030     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2031
2032 commit 8db0400a27839f91c047dcb83f4a0f09e054a180
2033 Author: Becky Bruce <becky.bruce@freescale.com>
2034 Date:   Thu Nov 6 13:04:09 2008 -0600
2035
2036     toplevel Makefile: Add MPC8641HPCN_36BIT target
2037
2038     This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
2039
2040     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2041
2042 commit 3111d32c494e8251b90917447796a7206b757e1e
2043 Author: Becky Bruce <becky.bruce@freescale.com>
2044 Date:   Thu Nov 6 17:37:35 2008 -0600
2045
2046     mpc8641: Support 36-bit physical addressing
2047
2048     This patch creates a memory map with all the devices
2049     in 36-bit physical space, in addition to the 32-bit map.
2050     The CCSR relocation is moved (again, sorry) to
2051     allow for the physical address to be 36 bits - this
2052     requires translation to be enabled.  With 36-bit physical
2053     addressing enabled, we are no longer running with VA=PA
2054     translations.  This means we have to distinguish between
2055     the two in the config file.  The existing region name is
2056     used to indicate the virtual address, and a _PHYS variety
2057     is created to represent the physical address.
2058
2059     Large physical addressing is not enabled by default.
2060     Set CONFIG_PHYS_64BIT in the config file to turn this on.
2061
2062     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2063
2064 commit c759a01a0022de9378a3a761f49786f87684c916
2065 Author: Becky Bruce <becky.bruce@freescale.com>
2066 Date:   Thu Nov 6 17:36:04 2008 -0600
2067
2068     mpc8641: Change 32-bit memory map
2069
2070     The memory map on the 8641hpcn is modified to look more like
2071     the 85xx boards; this is a step towards a more standardized
2072     layout going forward. As part of this change, we now relocate
2073     the flash.
2074
2075     The regions for some of the mappings were far larger than they
2076     needed to be.  I have reduced the mappings to match the
2077     actual sizes supported by the hardware.
2078
2079     In addition I have removed the comments at the head
2080     of the BAT blocks in the config file, rather than updating
2081     them.  These get horribly out of date, and it's a simple
2082     matter to look at the defines to see what they are set to
2083     since everything is right here in the same file.
2084
2085     Documentation has been changed to reflect the new map, as this
2086     change is user visible, and affects the OS which runs post-uboot.
2087
2088     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2089
2090 commit bf9a8c34309ed9276258295db9e9212aabb2531a
2091 Author: Becky Bruce <becky.bruce@freescale.com>
2092 Date:   Wed Nov 5 14:55:35 2008 -0600
2093
2094     mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
2095
2096     We define CONFIG_MONITOR_BASE_EARLY to define the initial location
2097     of the bootpage in flash.   Use this to create an early mapping
2098     definition for the FLASH, and change the early_bats code to use this.
2099
2100     This  change facilitates the relocation of the flash since the early
2101     mappings are no longer tied to the final location of the flash.
2102
2103     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2104
2105 commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
2106 Author: Becky Bruce <becky.bruce@freescale.com>
2107 Date:   Wed Nov 5 14:55:34 2008 -0600
2108
2109     mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
2110
2111     Using a mtmsr/blr means that you have to be executing at the
2112     same virtual address once you enable translation.  This is
2113     unnecessarily restrictive, and is not really how this is
2114     usually done.  Change it to use the more common mtspr SRR0/SRR1
2115     and rfi method.
2116
2117     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2118
2119 commit 6bf98b1362f0cb237620355ed3e6762fff82388d
2120 Author: Becky Bruce <becky.bruce@freescale.com>
2121 Date:   Wed Nov 5 14:55:33 2008 -0600
2122
2123     mpc8641: make DIAG_ADDR == FLASH_BASE
2124
2125     Currently, that's what it is, but it's hardcoded.
2126
2127     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2128
2129 commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
2130 Author: Becky Bruce <becky.bruce@freescale.com>
2131 Date:   Wed Nov 5 14:55:32 2008 -0600
2132
2133     mpc8641: Drop imaginary second flash bank, map 8MB
2134
2135     There's a lot of setup and foo for the second flash
2136     bank.  The problem is, this board doesn't actually have one.
2137     Clean this up.  Also, the flash is 8M in size.  Get rid
2138     of the confusing aliased overmapping, and just map 8M.
2139
2140     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2141
2142 commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
2143 Author: Becky Bruce <becky.bruce@freescale.com>
2144 Date:   Wed Nov 5 14:55:31 2008 -0600
2145
2146     mpc8641: only define CONFIG_ENV_SIZE once
2147
2148     It's currently defined twice inside in an if/else block, but
2149     both halves set the same value.  Move the define outside
2150     the if.
2151
2152     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2153
2154 commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
2155 Author: Becky Bruce <becky.bruce@freescale.com>
2156 Date:   Wed Nov 5 14:55:30 2008 -0600
2157
2158     mpc86xx: Move setup_bats into cpu_init_f
2159
2160     In order to later allow for a physical relocation of the
2161     flash, setup_bats, which sets up the final BAT mapping
2162     for the board, needs to happen *after* init_laws().
2163     Otherwise, there will be no window programmed for the flash
2164     at the new physical location at the point when we change
2165     the mmu translation.
2166
2167     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2168
2169 commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
2170 Author: Becky Bruce <becky.bruce@freescale.com>
2171 Date:   Wed Nov 5 14:55:29 2008 -0600
2172
2173     mpc8641: Remove extra "0" from BR2 define
2174
2175     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2176
2177 commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
2178 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2179 Date:   Thu Oct 23 09:08:18 2008 -0400
2180
2181     drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
2182
2183     Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
2184     This adds support for PHY-less MAC connections to the UEC.
2185
2186     Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
2187     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2188
2189 commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
2190 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2191 Date:   Thu Oct 23 16:27:24 2008 +0000
2192
2193     ColdFire: Add mii driver in drivers/net
2194
2195     All CF platforms' mii.c are consolidated into one
2196
2197     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2198     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2199
2200 commit 25a859066b3af1070eb69f12022113c0a91bd813
2201 Author: Ben Warren <biggerbadderben@gmail.com>
2202 Date:   Mon Oct 27 23:53:17 2008 -0700
2203
2204     Moved initialization of PPC4xx EMAC to cpu_eth_init()
2205
2206     Removed initialization of the driver from net/eth.c
2207
2208     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2209     Acked-by: Stefan Roese <sr@denx.de>
2210
2211 commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
2212 Author: Ben Warren <biggerbadderben@gmail.com>
2213 Date:   Sun Nov 9 21:29:23 2008 -0800
2214
2215     Moved PPC4xx EMAC driver to drivers/net
2216
2217     Also changed path in all linker scripts that reference this driver
2218
2219     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2220     Acked-by: Stefan Roese <sr@denx.de>
2221
2222 commit 96e21f86e8266ed40759e5495ee461265d7f6d28
2223 Author: Ben Warren <biggerbadderben@gmail.com>
2224 Date:   Mon Oct 27 23:50:15 2008 -0700
2225
2226     Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2227
2228     All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
2229
2230     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2231     Acked-by: Stefan Roese <sr@denx.de>
2232
2233 commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
2234 Author: Ben Warren <biggerbadderben@gmail.com>
2235 Date:   Thu Oct 23 22:02:49 2008 -0700
2236
2237     Moved initialization of MPC8XX SCC to cpu_eth_init()
2238
2239     Removed initialization of the driver from net/eth.c
2240
2241     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2242
2243 commit a9bec96d6359ac9f90a852962bf3040cad9e0256
2244 Author: Ben Warren <biggerbadderben@gmail.com>
2245 Date:   Wed Oct 22 23:47:51 2008 -0700
2246
2247     Moved initialization of MPC8220 FEC to cpu_eth_init()
2248
2249     Removed initialization of the driver from net/eth.c
2250
2251     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2252
2253 commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
2254 Author: Ben Warren <biggerbadderben@gmail.com>
2255 Date:   Wed Oct 22 23:32:48 2008 -0700
2256
2257     Moved initialization of QE Ethernet controller to cpu_eth_init()
2258
2259     Removed initialization of the driver from net/eth.c
2260
2261     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2262
2263 commit 3456a148276d5494b53ee40242efb6462d163504
2264 Author: Ben Warren <biggerbadderben@gmail.com>
2265 Date:   Wed Oct 22 23:20:29 2008 -0700
2266
2267     Moved initialization of FCC Ethernet controller to cpu_eth_init
2268
2269     Affected boards:
2270         Several MPC8xx boards
2271         Several MPC8260/MPC8272 boards
2272         Several MPC85xx boards
2273
2274     Removed initialization of the driver from net/eth.c
2275
2276     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2277
2278 commit 62e15b497f5c6334c059512678c8db7940ae4c61
2279 Author: Ben Warren <biggerbadderben@gmail.com>
2280 Date:   Thu Oct 30 22:15:35 2008 -0700
2281
2282     Fix typo in cpu/mpc85xx/cpu.c
2283
2284     CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
2285
2286     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2287
2288 commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
2289 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2290 Date:   Sun Oct 19 12:08:50 2008 +0900
2291
2292     net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
2293
2294     This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
2295     as a part of ongoing eth_initialize cleanup work.  The function ret value
2296     is also fixed as it should be negative on fail.
2297
2298     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2299     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2300
2301 commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
2302 Author: Ben Warren <biggerbadderben@gmail.com>
2303 Date:   Fri Sep 5 01:55:22 2008 -0400
2304
2305     Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
2306
2307     Also, removed the driver initialization from net/eth.c
2308
2309     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2310
2311 commit f2a7806fc23e82d30c8548911369e0c530607354
2312 Author: Clive Stubbings <uboot@xentech.co.uk>
2313 Date:   Mon Oct 27 15:05:00 2008 +0000
2314
2315     xilinx_emaclite buffer overrun
2316
2317     Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
2318     PKTSIZE_ALIGN bytes long.
2319
2320     Acked-by: Michal Simek <monstr@monstr.eu>
2321
2322     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2323
2324 commit 0115b1953718a2969f6469d3d5da51ba11e12d42
2325 Author: richardretanubun <richardretanubun@ruggedcom.com>
2326 Date:   Fri Sep 26 08:59:12 2008 -0400
2327
2328     NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
2329
2330     The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
2331     This patch makes these function use the devname argument that is passed in to
2332     allow access to the phy registers of other devices in devlist[].
2333
2334     Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
2335
2336     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2337
2338 commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
2339 Author: richardretanubun <richardretanubun@ruggedcom.com>
2340 Date:   Mon Oct 6 15:31:43 2008 -0400
2341
2342     Adds two more ethernet interface to 83xx
2343
2344     Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
2345     Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
2346     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2347
2348 commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
2349 Author: Stelian Pop <stelian@popies.net>
2350 Date:   Fri Nov 7 13:54:31 2008 +0100
2351
2352     AT91: Replace AT91_BASE_EMAC by the board specific values.
2353
2354     AT91_BASE_EMAC is never used outside the board specific files,
2355     so replace its usage by the board specific AT91xxx_BASE_EMAC.
2356
2357     Signed-off-by: Stelian Pop <stelian@popies.net>
2358     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2359
2360 commit c91e17affa175ce06afa89b04752301eb4a61666
2361 Author: Stelian Pop <stelian@popies.net>
2362 Date:   Fri Nov 7 12:09:21 2008 +0100
2363
2364     AT91: Replace (undefined) AT91_ID_US* by the board specific values.
2365
2366     AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
2367     Since they are never used outside the board specific files, they can
2368     be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
2369     AT91xxx_ID_US2.
2370
2371     Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
2372
2373     Signed-off-by: Stelian Pop <stelian@popies.net>
2374     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2375
2376 commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
2377 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2378 Date:   Sat Nov 1 10:47:59 2008 +0100
2379
2380     Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
2381
2382     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2383
2384 commit 1079432e04ccf71aa3684181186182cd63512f19
2385 Author: Sergey Lapin <slapin@ossfans.org>
2386 Date:   Fri Oct 31 12:28:43 2008 +0100
2387
2388     Custom AFEB9260 board support
2389
2390     This patch provides support for AFEB9260 board, a product of
2391     OpenSource hardware and software. Some commertial projects
2392     are made with this design. A board is basically AT91SAM9260-EK
2393     with some modifications and different peripherals and different
2394     parts used. Main purpose of this project is to gain experience in
2395     hardware design.
2396     More info: http://groups.google.com/group/arm9fpga-evolution-board
2397     (In Russian only, sorry).
2398     Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
2399
2400     Signed-off-by: Sergey Lapin <slapin@ossfans.org>
2401
2402 commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
2403 Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
2404 Date:   Tue Oct 21 13:17:16 2008 +0900
2405
2406     Change to use "do_div" macro
2407
2408     Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
2409
2410 commit e352495318d8056a00faa21b633b3e4374bfbf52
2411 Author: Roman Mashak <romez777@gmail.com>
2412 Date:   Wed Oct 22 16:00:26 2008 -0400
2413
2414     ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
2415
2416     OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
2417     It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
2418
2419     Signed-off-by: Roman Mashak <romez777@gmail.com>
2420
2421 commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
2422 Author: Roman Mashak <romez777@gmail.com>
2423 Date:   Tue Oct 21 03:01:41 2008 -0700
2424
2425     ARM/Versatile port: Removed unused functions
2426
2427     Removal of never used functions.
2428
2429     Signed-off-by: Roman Mashak <romez777@gmail.com>
2430
2431 commit 1266df887781c779deaf6d05eea2ef90a470cb34
2432 Author: Becky Bruce <becky.bruce@freescale.com>
2433 Date:   Mon Nov 3 15:44:01 2008 -0600
2434
2435     powerpc: change 86xx SMP boot method
2436
2437     We put the bootpg for the secondary cpus into memory and use
2438     BPTR to get to it.  This is a step towards converting to the
2439     ePAPR boot methodology.  Also, the code is written to
2440     deal properly with more than 4GB of RAM.
2441
2442     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2443
2444 commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
2445 Author: Becky Bruce <becky.bruce@freescale.com>
2446 Date:   Fri Oct 31 17:13:49 2008 -0500
2447
2448     8641HPCN: Config file cleanup
2449
2450     There are several items in the config file that were hardcoded
2451     but that should really be based on other config options, since
2452     the regions are contiguous and depend on being so.  This cleans
2453     that up a bit.  Also, add BR_PHYS_ADDR() macro to convert
2454     addresses into the proper format for BR registers.
2455
2456     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2457
2458 commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
2459 Author: Becky Bruce <becky.bruce@freescale.com>
2460 Date:   Fri Oct 31 17:13:32 2008 -0500
2461
2462     86xx: Make dram_size a phys_size_t
2463
2464     It's currently a long and should be phys_size_t.
2465
2466     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2467
2468 commit 104992fc541302a6bac74448e01e7fdad20abca0
2469 Author: Becky Bruce <becky.bruce@freescale.com>
2470 Date:   Sun Nov 2 18:19:32 2008 -0600
2471
2472     powerpc 86xx: Handle CCSR relocation earlier
2473
2474     Currently, the CCSR gets relocated while translation is
2475     enabled, meaning we need 2 BAT translations to get to both the
2476     old location and the new location.  Also, the DEFAULT
2477     CCSR location has a dependency on the BAT that maps the
2478     FLASH region.  Moving the relocation removes this unnecessary
2479     dependency. This makes it easier and more intutive to
2480     modify the board's memory map.
2481
2482     Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
2483     BAT for CCSR space.
2484
2485     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2486
2487 commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
2488 Author: Becky Bruce <becky.bruce@freescale.com>
2489 Date:   Fri Oct 31 17:14:14 2008 -0500
2490
2491     mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
2492
2493     You can't actually have both, and with some coming changes to
2494     change the memory map for the board and support 36-bit physical,
2495     we need the extra BAT that is being consumed by having both.
2496
2497     I also make non-PCI configs build cleanly, for the sake of sanity.
2498
2499     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2500
2501 commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
2502 Author: Becky Bruce <becky.bruce@freescale.com>
2503 Date:   Fri Oct 31 17:14:00 2008 -0500
2504
2505     mpc8641: Stop supporting non-PCI_PNP configs
2506
2507     We don't actually ever do this, remove the code so we
2508     can stop maintaining it.
2509
2510     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2511
2512 commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
2513 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2514 Date:   Fri Oct 24 12:59:12 2008 +0000
2515
2516     ColdFire: Fix M5329EVB and M5373EVB nand issue
2517
2518     Fix compilation issue caused by a few mismatches.
2519     Provide proper nand chip select enable/disable in
2520     nand_hwcontrol() rather than in board_nand_init()
2521     just enable once. Remove redundant local nand driver
2522     functions - nand_read_byte(), nand_write_byte() and
2523     nand_dev_ready() to use common nand driver.
2524
2525     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2526
2527 commit 1b2708442224a551a0b865b52710306333888932
2528 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2529 Date:   Wed Oct 22 11:55:30 2008 +0000
2530
2531     ColdFire: Fix compilation error
2532
2533     The error was caused by the change for strmhz() in cpu.c.
2534     A few of them were one extra close parenthesis.
2535
2536     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2537
2538 commit 536e7dac16769954915a484e682a2efb28699133
2539 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2540 Date:   Wed Oct 22 11:38:21 2008 +0000
2541
2542     ColdFire: Add MCF5301x CPU and M53017EVB support
2543
2544     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2545
2546 commit a21d0c2cc9add8894d971ab791f4032f077db817
2547 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2548 Date:   Tue Oct 21 15:37:02 2008 +0000
2549
2550     ColdFire: Add SBF support for M52277EVB
2551
2552     Add serial boot support
2553
2554     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2555
2556 commit b202816c61042c183fe67d097a5893b0f2dafba0
2557 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2558 Date:   Tue Oct 21 14:19:26 2008 +0000
2559
2560     ColdFire: Use CFI driver for M5272C3
2561
2562     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2563
2564 commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
2565 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2566 Date:   Tue Oct 21 13:47:54 2008 +0000
2567
2568     ColdFire: Relocate FEC's GPIO and mii functions protocols
2569
2570     Place FEC pin assignments in cpu_init.c from platform's
2571     mii.c
2572
2573     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2574
2575 commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
2576 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2577 Date:   Tue Oct 21 12:15:44 2008 +0000
2578
2579     ColdFire: Remove platforms mii.c file
2580
2581     Will use mcfmii.c driver in drivers/net rather than
2582     keep creating new mii.c for each future platform.
2583     Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
2584     M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
2585     M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
2586     mii.c
2587
2588     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2589
2590 commit 012522fef3b382469125beb46a315ab4dee02fb0
2591 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2592 Date:   Tue Oct 21 10:03:07 2008 +0000
2593
2594     ColdFire: Modules header files cleanup
2595
2596     Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
2597     MDHA, SKHA, INTC, and FlexBus structures and
2598     definitions in immap_5xxx.h to more unify modules
2599     header files. Append DSPI support for m547x_8x.
2600     SSI cleanup. Remove USB Host structure from immap_539.h.
2601     Apply changes to use FlexBus structures in mcf52x2's
2602     cpu_init.c and platform configuration files.
2603
2604     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2605
2606 commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
2607 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2608 Date:   Tue Oct 21 08:52:36 2008 +0000
2609
2610     ColdFire: Remove linker file
2611
2612     Each different build for M54455EVB and M5235EVB will
2613     create a u-boot.lds linker file. It is redundant to
2614     keep the u-boot.lds
2615
2616     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2617
2618 commit 0829323073c505556ed5f5073f91adb504584d45
2619 Author: Peter Tyser <ptyser@xes-inc.com>
2620 Date:   Fri Oct 31 11:26:44 2008 -0500
2621
2622     ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
2623
2624     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2625
2626 commit a80b21d5127583171d6e9bc7f722947641898012
2627 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2628 Date:   Fri Oct 31 12:12:12 2008 +0100
2629
2630     common/Makefile: create others group for non core, environment and command files
2631
2632     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2633
2634 commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
2635 Author: Wolfgang Denk <wd@denx.de>
2636 Date:   Fri Oct 31 01:13:37 2008 +0100
2637
2638     TQM8260: use CFI flash driver instead of custom driver.
2639
2640     Signed-off-by: Wolfgang Denk <wd@denx.de>
2641
2642 commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
2643 Author: Andy Fleming <afleming@freescale.com>
2644 Date:   Thu Oct 30 17:35:30 2008 -0500
2645
2646     Consolidate MAX/MIN definitions
2647
2648     There were several, now there is one (two if you count the lower-case
2649     versions).
2650
2651     Signed-off-by: Andy Fleming <afleming@freescale.com>
2652
2653 commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
2654 Author: Heiko Schocher <hs@denx.de>
2655 Date:   Thu Oct 30 09:23:09 2008 +0100
2656
2657     mgsuvd: remove unused defines in config file.
2658
2659     Signed-off-by: Heiko Schocher <hs@denx.de>
2660
2661 commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
2662 Author: Wolfgang Denk <wd@denx.de>
2663 Date:   Sun Nov 2 16:14:22 2008 +0100
2664
2665     Coding Style cleanup, update CHANGELOG
2666
2667     Signed-off-by: Wolfgang Denk <wd@denx.de>
2668
2669 commit a47f957ab523019992fdef857af01bd71c58a4da
2670 Author: Alessandro Rubini <rubini-list@gnudd.com>
2671 Date:   Fri Oct 31 22:33:21 2008 +0100
2672
2673     NAND: Allow NAND and OneNAND to coexist
2674
2675     This removes in nand.h code that is verbatim duplicated from bbm.h,
2676     including directly bbm.h in nand.h. The previous state of affairs
2677     prevented compiling code for a board hosting both NAND and OneNAND chips.
2678
2679     Reported-by: Scott Wood <scottwood@freescale.com>
2680     Signed-off-by: Alessandro Rubini <rubini@unipv.it>
2681     Signed-off-by: Scott Wood <scottwood@freescale.com>
2682
2683 commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
2684 Author: Scott Wood <scottwood@freescale.com>
2685 Date:   Fri Oct 31 13:51:12 2008 -0500
2686
2687     JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
2688
2689     Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
2690     Signed-off-by: Scott Wood <scottwood@freescale.com>
2691
2692 commit c57fc28947e248fb03c49a28b467686299895055
2693 Author: Jason Jin <Jason.Jin@freescale.com>
2694 Date:   Fri Oct 31 05:07:04 2008 -0500
2695
2696     NAND: Add NAND support for MPC8536DS board
2697
2698     This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
2699     for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
2700     It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.
2701
2702     Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
2703     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2704     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2705
2706 commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
2707 Author: Haiying Wang <Haiying.Wang@freescale.com>
2708 Date:   Fri Oct 31 05:06:14 2008 -0500
2709
2710     NAND: Fix CONFIG_ENV_ADDR for MPC8572DS
2711
2712     CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).
2713
2714     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2715     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2716
2717 commit 51b572a801be57790fe26adaa530210e7fba59cc
2718 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2719 Date:   Fri Oct 24 10:49:48 2008 +0900
2720
2721     sh: rsk7203: Moved rsk7203 board to board/renesas
2722
2723     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2724
2725 commit 58453b00b3ebb26aaa901210023f99504a90bb00
2726 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2727 Date:   Fri Oct 24 10:48:31 2008 +0900
2728
2729     sh: MigoR: Moved MigoR board to board/renesas
2730
2731     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2732
2733 commit c1da2a22817ba85b437afa2f4e715e658b219fd1
2734 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2735 Date:   Fri Oct 24 10:39:44 2008 +0900
2736
2737     sh: r2dplus: Moved r2dplus board to board/renesas
2738
2739     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2740
2741 commit 78385bf2359d828184d0b3649f7ae6b933420000
2742 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2743 Date:   Fri Oct 24 10:36:13 2008 +0900
2744
2745     sh: sh7763rdp: Moved sh7763rdp board to board/renesas
2746
2747     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2748
2749 commit c6525d459c350bfc246ea7826456af77e1e314eb
2750 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2751 Date:   Fri Oct 24 10:35:19 2008 +0900
2752
2753     sh: sh7785lcr: Moved sh7785lcr board to board/renesas
2754
2755     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2756
2757 commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
2758 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2759 Date:   Fri Oct 24 10:34:21 2008 +0900
2760
2761     sh: r7780mp: Moved r7780mp board to board/renesas
2762
2763     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2764
2765 commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
2766 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2767 Date:   Fri Oct 24 10:32:14 2008 +0900
2768
2769     sh: ap325rxa: Moved ap325rxa board to board/renesas
2770
2771     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2772
2773 commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
2774 Author: Wolfgang Denk <wd@xpert.denx.de>
2775 Date:   Fri Oct 31 01:12:28 2008 +0100
2776
2777     CFI Driver: Fix "flash not ready" problem
2778
2779     This patch fixes a problem on systems where the NOR flash is attached
2780     to a 64 bit bus.  The toggle bit detection in flash_toggle() is based
2781     on the assumption that the same flash address is read twice without
2782     any other interjacent flash accesses.  However, on 32 bit systems the
2783     function flash_read64() [as currently implemented] does not perform
2784     an atomic 64 bit read - instead, this is broken down into two 32 bit
2785     read accesses on addresses "addr" and "addr + 4".  So instead of
2786     reading a 64 bit value twice from "addr", we see a sequence of 4 32
2787     bit reads from "addr", "addr + 4", "addr", and "addr + 4".  The
2788     consequence is that flash_toggle() fails to work.
2789
2790     This patch implements a simple, but somewhat ugly solution, as it
2791     avoids the use of flash_read64() in this critical place (by breaking
2792     it down manually into 32 bit read operations) instead of rewriting
2793     flash_read64() such to perform atomic 64 bit reads as one could
2794     expect.  However, such a rewrite would require the use of floating
2795     point load operations, which becomes pretty complex:
2796
2797         save MSR;
2798         set Floating Point Enable bit in MSR;
2799         use "lfd" instruction to perform atomic 64 bit read;
2800         use "stfd" to store value to temporary variable on stack;
2801         load u64 value from temporary variable;
2802         restore saved MSR;
2803         return u64 value;
2804
2805     The benefit-cost ratio of such an implementation was considered too
2806     bad to actually attempt this, especially as we can expect that such
2807     an implementation would not only have a bigger memory footprint but
2808     also cause a performance degradation.
2809
2810     Signed-off-by: Wolfgang Denk <wd@denx.de>
2811     Signed-off-by: Stefan Roese <sr@denx.de>
2812
2813 commit cdd4fe63b094d4b767f12ff241d72566b461ee61
2814 Author: Stefan Roese <sr@denx.de>
2815 Date:   Fri Oct 31 10:48:08 2008 +0100
2816
2817     ppc4xx: Fix spelling error in MAINTAINERS file
2818
2819     Signed-off-by: Stefan Roese <sr@denx.de>
2820
2821 commit be270798900b75ad9c47c7b79c72f70441196c56
2822 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2823 Date:   Tue Oct 28 13:37:00 2008 +0100
2824
2825     ppc4xx: Update PMC440 board support
2826
2827     This patch brings PMC440 board support up to date:
2828
2829     - fix GPIO configuration
2830     - add misc_init_f()
2831     - use better values for usbact variable
2832     - fix USB 2.0 phy reset sequence
2833     - shrink BAR2 to save PCI address space
2834     - add FDT support
2835
2836     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2837     Signed-off-by: Stefan Roese <sr@denx.de>
2838
2839 commit 75183b1a7fc04206d9779d13f16e03853d7e965d
2840 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2841 Date:   Tue Oct 28 13:36:59 2008 +0100
2842
2843     ppc4xx: Fix PMC440 BSP commands
2844
2845     This patch fixes the PMC440 BSP commands painit and selfreset
2846
2847     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2848     Signed-off-by: Stefan Roese <sr@denx.de>
2849
2850 commit 76b565b69f886d5ae748db65e44f464b0e70d41a
2851 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2852 Date:   Tue Oct 28 13:36:58 2008 +0100
2853
2854     ppc4xx: Update PMC440 board configuration
2855
2856     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2857     Signed-off-by: Stefan Roese <sr@denx.de>
2858
2859 commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
2860 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2861 Date:   Tue Oct 28 13:36:57 2008 +0100
2862
2863     ppc4xx: Fix esd loadpci command
2864
2865     This patch fixes esd's loadpci command when not all
2866     memory on adapter boards is accessable via PCI.
2867
2868     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2869     Signed-off-by: Stefan Roese <sr@denx.de>
2870
2871 commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
2872 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2873 Date:   Tue Oct 28 13:36:56 2008 +0100
2874
2875     ppc4xx: Clean up PMC440 header
2876
2877     -Codingstyle cleanup
2878     -Remove unused GPIO define
2879
2880     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2881     Signed-off-by: Stefan Roese <sr@denx.de>
2882
2883 commit 295133258a44f97a57fb2ec339aecfda11f4db95
2884 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2885 Date:   Tue Oct 28 13:36:55 2008 +0100
2886
2887     ppc4xx: Handle other board variant in PMC440 FPGA code
2888
2889     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2890     Signed-off-by: Stefan Roese <sr@denx.de>
2891
2892 commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
2893 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2894 Date:   Mon Oct 27 12:35:59 2008 +0100
2895
2896     ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2897
2898     Xilinx ppc440 and ppc405 have many similarities. This patch merge the
2899     config files of both infrastuctures
2900
2901     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2902     Signed-off-by: Stefan Roese <sr@denx.de>
2903
2904 commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
2905 Author: Stefan Roese <sr@denx.de>
2906 Date:   Sat Oct 25 06:45:31 2008 +0200
2907
2908     ppc4xx: Correctly configure the GPIO pin muxing on Arches
2909
2910     Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
2911     pin multiplexing correctly
2912
2913     Signed-off-by: Stefan Roese <sr@denx.de>
2914
2915 commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
2916 Author: Bartlomiej Sieka <tur@semihalf.com>
2917 Date:   Thu Oct 30 23:22:04 2008 +0100
2918
2919     Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)
2920
2921     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2922
2923 commit 4bc7deee9095f21e243b724ca3d634251c1d5432
2924 Author: David Gibson <david@gibson.dropbear.id.au>
2925 Date:   Wed Oct 29 23:27:45 2008 -0500
2926
2927     libfdt: Fix bug in fdt_subnode_offset_namelen()
2928
2929     There's currently an off-by-one bug in fdt_subnode_offset_namelen()
2930     which causes it to keep searching after it's finished the subnodes of
2931     the given parent, and into the subnodes of siblings of the original
2932     node which come after it in the tree.
2933
2934     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2935     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2936
2937 commit f242a08871839eac081ba5b599af979f3a148a0d
2938 Author: Peter Korsgaard <jacmet@sunsite.dk>
2939 Date:   Tue Oct 28 08:26:52 2008 +0100
2940
2941     fdt_resize(): ensure minimum padding
2942
2943     fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
2944     (16 bytes), so make sure that fdt_resize at least adds that much
2945     padding, no matter what the location or size of the fdt is.
2946
2947     Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2948     Acked-by: Andy Fleming <afleming@freescale.com>
2949
2950 commit d685b74c64a38849f1a129b3ab846fbf67dd937e
2951 Author: Dave Liu <daveliu@freescale.com>
2952 Date:   Thu Oct 23 21:59:35 2008 +0800
2953
2954     74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
2955
2956     The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
2957
2958     mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
2959
2960     This is needed in unlock_ram_in_cache() because it is called from C and
2961     will corrupt the small data area anchor that is kept in R2.
2962
2963     lock_ram_in_cache() is modified similarly as good coding practice, but
2964     is not called from C.
2965
2966     Signed-off-by: Nick Spence <nick.spence@freescale.com>
2967
2968     also, the r2 is used as global data pointer.
2969
2970     Signed-off-by: Dave Liu <daveliu@freescale.com>
2971
2972 commit e053ab1903ccae6048ef759025b9f675bba91450
2973 Author: Scott Wood <scottwood@freescale.com>
2974 Date:   Tue Oct 28 11:45:04 2008 -0500
2975
2976     mpc83xx pci: Round up memory size in inbound window.
2977
2978     The current calculation will fail to cover all memory if
2979     its size is not a power of two.
2980
2981     Signed-off-by: Scott Wood <scottwood@freescale.com>
2982     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2983
2984 commit 1c671977dc81359628be27ac99c174e76e8069ba
2985 Author: Dave Liu <daveliu@freescale.com>
2986 Date:   Thu Oct 23 21:19:13 2008 +0800
2987
2988     86xx: remove the unused definition
2989
2990     Signed-off-by: Dave Liu <daveliu@freescale.com>
2991
2992 commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
2993 Author: Dave Liu <daveliu@freescale.com>
2994 Date:   Tue Oct 28 17:47:49 2008 +0800
2995
2996     86xx: remove the redundant r2 global data pointer save
2997
2998     The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
2999     the another global data pointer save, but in fact the
3000     global data pointer will be initialized in the board_init_r,
3001     so remove it such as the 85xx/83xx family.
3002
3003     Signed-off-by: Dave Liu <daveliu@freescale.com>
3004     Acked-by: Kumar Gala <kumar.gala@freescale.com>
3005
3006 commit bd888e9544419665334a6f47f81f34011cea38f3
3007 Author: Dave Liu <daveliu@freescale.com>
3008 Date:   Tue Oct 28 17:47:41 2008 +0800
3009
3010     86xx: remove the unused code for 86xx family
3011
3012     I believe these code was copied from 74xx family, but for
3013     86xx, it is unused.
3014
3015     Signed-off-by: Dave Liu <daveliu@freescale.com>
3016     Acked-by: Kumar Gala <kumar.gala@freescale.com>
3017
3018 commit 5ba1ef507402bc5e344dc374203792a40f222e8a
3019 Author: Dave Liu <daveliu@freescale.com>
3020 Date:   Tue Oct 28 17:46:35 2008 +0800
3021
3022     86xx: remove the second DDR LAW setting for mpc8641hpcn
3023
3024     The DDR1 LAW will precedence the DDR2 LAW, so remove
3025     the second DDR LAW.
3026
3027     Signed-off-by: Dave Liu <daveliu@freescale.com>
3028     Acked-by: Becky Bruce <becky.bruce@freescale.com>
3029
3030 commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
3031 Author: Dave Liu <daveliu@freescale.com>
3032 Date:   Tue Oct 28 17:46:23 2008 +0800
3033
3034     86xx: remove the unused ddr_enable_ecc in the board file
3035
3036     The DDR controller of 86xx processors have the ECC data init
3037     feature, and the new DDR code is using the feature, we don't
3038     need the way with DMA to init memory again.
3039
3040     Signed-off-by: Dave Liu <daveliu@freescale.com>
3041     Acked-by: Kumar Gala <kumar.gala@freescale.com>
3042
3043 commit dc2adad85bf580d65916c940683f6e9671e8a5dd
3044 Author: Dave Liu <daveliu@freescale.com>
3045 Date:   Tue Oct 28 17:46:12 2008 +0800
3046
3047     86xx: Move the clear_tlbs before MMU turn on
3048
3049     We must invalidate TLBs before MMU turn on, but
3050     currently the code is not, if there are some stale
3051     TLB entry valid in the TLBs, it will cause strange
3052     issue.
3053
3054     Signed-off-by: Dave Liu <daveliu@freescale.com>
3055     Acked-by: Becky Bruce <becky.bruce@freescale.com>
3056
3057 commit 5cdade07b118d07154cb882650f9778cecc8a87c
3058 Author: Scott Wood <scottwood@freescale.com>
3059 Date:   Mon Oct 27 15:57:08 2008 -0500
3060
3061     mpc8313erdb: Document NAND boot.
3062
3063     Previously, the documentation claimed that NAND boot is not supported.
3064     This is no longer true.
3065
3066     Signed-off-by: Scott Wood <scottwood@freescale.com>
3067
3068 commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
3069 Author: Scott Wood <scottwood@freescale.com>
3070 Date:   Wed Oct 29 14:20:26 2008 -0500
3071
3072     NAND: Properly create JFFS2 cleanmarkers.
3073
3074     As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
3075     command is currently broken, and among other things causes all blocks
3076     to be marked bad.
3077
3078     This implements it properly using MTD_OOB_AUTO, along with some
3079     indentation fixes.
3080
3081     Signed-off-by: Scott Wood <scottwood@freescale.com>
3082
3083 commit f7fe57c09866b44692d18c8cf22828bd137ec58d
3084 Author: Scott Wood <scottwood@freescale.com>
3085 Date:   Wed Oct 29 13:42:41 2008 -0500
3086
3087     NAND fsl elbc: Set FMR[ECCM] based on page size.
3088
3089     Hardware expects ECCM 0 for small page and ECCM 1 for large page
3090     when booting from NAND, so use those defaults.
3091
3092     Signed-off-by: Scott Wood <scottwood@freescale.com>
3093
3094 commit c013b74975dab0805ef6d369b013230c4e8a660d
3095 Author: Haiying Wang <Haiying.Wang@freescale.com>
3096 Date:   Wed Oct 29 13:32:59 2008 -0400
3097
3098     NAND: Add support for MPC8572DS board
3099
3100     This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
3101     0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
3102     config file.
3103
3104     It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
3105     make room for the increased code size with NAND enabled.
3106
3107     Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
3108     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
3109     Signed-off-by: Scott Wood <scottwood@freescale.com>
3110
3111 commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
3112 Author: Haiying Wang <Haiying.Wang@freescale.com>
3113 Date:   Wed Oct 29 11:05:55 2008 -0400
3114
3115     Make Freescale local bus registers available for both 83xx and 85xx.
3116
3117     - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
3118       can be shared by both 83xx and 85xx
3119     - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
3120       files which use lbus83xx_t.
3121     - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
3122       85xx can share them.
3123
3124     Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
3125     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
3126     Signed-off-by: Scott Wood <scottwood@freescale.com>
3127
3128 commit 695c130e4bf75b444720ddfd83aca88f41c046cf
3129 Author: Scott Wood <scottwood@freescale.com>
3130 Date:   Mon Oct 27 15:38:30 2008 -0500
3131
3132     NAND: Align right column of the shorthelp with other commands.
3133
3134     I accidentally broke this in when making consistent the partial
3135     alignment of the longhelp.
3136
3137     Signed-off-by: Scott Wood <scottwood@freescale.com>
3138
3139 commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
3140 Author: Karl Beldan <karl.beldan@gmail.com>
3141 Date:   Mon Sep 15 16:08:03 2008 +0200
3142
3143     NAND: Reset chip on power-up
3144
3145     Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
3146     The first command sent is NAND_CMD_READID.
3147     Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
3148     Tested with an MT29F4G08AAC.
3149
3150     Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
3151     Signed-off-by: Scott Wood <scottwood@freescale.com>
3152
3153 commit c45912d8abc52de796b9059a58faf7c4166eab58
3154 Author: Scott Wood <scottwood@freescale.com>
3155 Date:   Fri Oct 24 16:20:43 2008 -0500
3156
3157     NAND: sync with 2.6.27
3158
3159     This brings the core NAND code up to date with the Linux kernel.
3160
3161     Since there were several drivers in Linux as of the last update that are
3162     not in u-boot, I'm not bringing over new drivers that have been added
3163     since in the absence of an interested party.
3164
3165     I did not update OneNAND since it was recently synced by Kyungmin Park,
3166     and I'm not sure exactly what the common ancestor is.
3167
3168     Signed-off-by: Scott Wood <scottwood@freescale.com>
3169
3170 commit b1d0db1805c3395149777e507b6da53410abac4e
3171 Author: Kumar Gala <galak@kernel.crashing.org>
3172 Date:   Tue Oct 21 17:25:47 2008 -0500
3173
3174     bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
3175
3176     Added the ability to config out bootm support for Linux, NetBSD, RTEMS
3177
3178     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3179
3180 commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
3181 Author: Kumar Gala <galak@kernel.crashing.org>
3182 Date:   Tue Oct 21 17:25:46 2008 -0500
3183
3184     bootm: support subcommands in linux ppc bootm
3185
3186     Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.
3187
3188     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3189
3190 commit 49c3a861d11735838f1f1b11999ce433006dc919
3191 Author: Kumar Gala <galak@kernel.crashing.org>
3192 Date:   Tue Oct 21 17:25:45 2008 -0500
3193
3194     bootm: Add subcommands
3195
3196     Add the ability to break the steps of the bootm command into several
3197     subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
3198
3199     This allows us to do things like manipulate device trees before
3200     they are passed to a booting kernel or setup memory for a secondary
3201     core in multicore situations.
3202
3203     Not all OS types support all subcommands (currently only start, loados,
3204     ramdisk, fdt, and go are supported).
3205
3206     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3207
3208 commit be08315933537f061bc1ce61f33a29c56458bbad
3209 Author: Kumar Gala <galak@kernel.crashing.org>
3210 Date:   Tue Oct 21 17:25:44 2008 -0500
3211
3212     bootm: Move to using a function pointer table for the boot os function
3213
3214     This removes a bit of code and makes it easier for the upcoming sub bootm
3215     command support to call into the proper OS specific handler.
3216
3217     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3218     Signed-off-by: Wolfgang Denk <wd@denx.de>
3219
3220 commit a369f4a492fa2805d87775d27380f0eeaca35aa6
3221 Author: Graeme Russ <graeme.russ@gmail.com>
3222 Date:   Mon Sep 29 23:03:14 2008 +1000
3223
3224     i386: Renamed show_boot_progress in assembler code
3225
3226     Renamed show_boot_progress in assembler init phase to
3227     show_boot_progress_asm to avoid link conflicts with C version
3228
3229     Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
3230
3231 commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
3232 Author: Peter Tyser <ptyser@xes-inc.com>
3233 Date:   Mon Oct 27 16:42:00 2008 -0500
3234
3235     85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
3236
3237     The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
3238     processors have a 3-bit wide IO_SEL field but have the most
3239     significant bit is wired to 0 so this change should not affect
3240     them.
3241
3242     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
3243
3244 commit cd4251624205cb97104f6e32679dc7754934f711
3245 Author: Becky Bruce <becky.bruce@freescale.com>
3246 Date:   Mon Oct 27 16:09:42 2008 -0500
3247
3248     powerpc: fix pci window initialization to work with > 4GB DRAM
3249
3250     The existing code has a few errors that need to be fixed in
3251     order to support large RAM sizes.  Fix those, and add a
3252     comment to make it clearer.
3253
3254     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
3255     Acked-by: Kumar Gala <galak@kernel.crashing.org>
3256
3257 commit 219542a1a66ca017b12860920714a9859b18a5d7
3258 Author: Kumar Gala <galak@kernel.crashing.org>
3259 Date:   Mon Oct 27 13:16:20 2008 -0500
3260
3261     pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
3262
3263     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3264
3265 commit 6b59e03e0237a40a2305ea385defdfd92000978b
3266 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3267 Date:   Mon Sep 1 16:21:22 2008 +0200
3268
3269     lcd: Let the board code show board-specific info
3270
3271     The information displayed when CONFIG_LCD_INFO is set is inherently
3272     board-specific, so it should be done by the board code. The current code
3273     dealing with this only handles two cases, and is already a horrible mess
3274     of #ifdeffery.
3275
3276     Yes, this duplicates some code, but it also allows boards to print more
3277     board-specific information; this used to be very difficult.
3278
3279     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3280     Signed-off-by: Anatolij Gustschin <agust@denx.de>
3281
3282 commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
3283 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3284 Date:   Mon Sep 1 16:21:21 2008 +0200
3285
3286     lcd: Set lcd_is_enabled before clearing the screen
3287
3288     This allows the logo/info rendering routines to use the regular
3289     lcd_putc/lcd_puts/lcd_printf calls.
3290
3291     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3292     Signed-off-by: Anatolij Gustschin <agust@denx.de>
3293
3294 commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
3295 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3296 Date:   Mon Sep 1 16:21:20 2008 +0200
3297
3298     lcd: Implement lcd_printf()
3299
3300     lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
3301     this by borrowing the lcd_printf() implementation from the cogent board
3302     code (which appears to use its own LCD framework.)
3303
3304     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3305     Signed-off-by: Anatolij Gustschin <agust@denx.de>
3306
3307 commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
3308 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3309 Date:   Mon Sep 1 16:21:19 2008 +0200
3310
3311     atmel_lcdfb: Straighten out funky vl_sync logic
3312
3313     If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
3314     otherwise we don't. WTF?
3315
3316     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3317     Signed-off-by: Anatolij Gustschin <agust@denx.de>
3318
3319 commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
3320 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3321 Date:   Mon Sep 1 16:21:18 2008 +0200
3322
3323     atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>
3324
3325     atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
3326     includes a file that does, asm/arch/gpio.h, but this file doesn't
3327     include <asm/arch/hardware.h> like it's supposed to.
3328
3329     Add the missing include to asm/arch/gpio.h and remove the workaround
3330     from the atmel_lcdfb driver. This makes the driver compile on avr32.
3331
3332     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
3333     Signed-off-by: Anatolij Gustschin <agust@denx.de>
3334
3335 commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
3336 Author: Kumar Gala <galak@kernel.crashing.org>
3337 Date:   Wed Oct 22 14:38:55 2008 -0500
3338
3339     86xx: Convert all fsl_pci_init users to new APIs
3340
3341     Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
3342     fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().
3343
3344     With these changes the board code is a bit smaller and we get dma-ranges
3345     set in the device tree for these boards.
3346
3347     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3348     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3349     Acked-by: Jon Loeliger <jdl@freescale.com>
3350
3351 commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
3352 Author: Kumar Gala <galak@kernel.crashing.org>
3353 Date:   Tue Oct 21 08:28:33 2008 -0500
3354
3355     85xx: Convert all fsl_pci_init users to new APIs
3356
3357     Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
3358     MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
3359     and ft_fsl_pci_setup().
3360
3361     With these changes the board code is a bit smaller and we get dma-ranges
3362     set in the device tree for these boards.
3363
3364     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3365     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3366
3367 commit a2aab460727e5f674353a83a81000ef794bffcae
3368 Author: Kumar Gala <galak@kernel.crashing.org>
3369 Date:   Thu Oct 23 00:01:06 2008 -0500
3370
3371     pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
3372
3373     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3374     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3375
3376 commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
3377 Author: Kumar Gala <galak@kernel.crashing.org>
3378 Date:   Wed Oct 22 14:06:24 2008 -0500
3379
3380     pci/fsl_pci_init: Add a common PCI inbound setup function
3381
3382     Add a common setup function that determines the pci_region(s) based
3383     on how much memory we have in the system.
3384
3385     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3386     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3387
3388 commit 612ea01018a459234d54ed57ec6a5a244ce75678
3389 Author: Kumar Gala <galak@kernel.crashing.org>
3390 Date:   Tue Oct 21 10:13:14 2008 -0500
3391
3392     pci/fsl_pci_init: Enable larger address and setting inbound windows properly
3393
3394     * PCI Inbound window was setup incorrectly.  The PCI address and system
3395       address were swapped.  The PCI address should be setting piwar/piwbear
3396       and the system address should be setting pitar.
3397
3398     * Removed masking of addresses to allow for system address to support
3399       system address & PCI address >32-bits
3400
3401     * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses
3402
3403     * Respect the PCI_REGION_PREFETCH for inbound windows
3404
3405     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3406     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3407
3408 commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
3409 Author: Kumar Gala <galak@kernel.crashing.org>
3410 Date:   Wed Oct 22 23:33:56 2008 -0500
3411
3412     fdt: Added helper to set PCI dma-ranges property
3413
3414     Added fdt_pci_dma_ranges() that parses the pci_region info from the
3415     struct pci_controller and populates the dma-ranges based on it.
3416
3417     The max # of windws/dma-ranges we support is 3 since on embedded
3418     PowerPC based systems this is the max number of windows.
3419
3420     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3421     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3422
3423 commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
3424 Author: Kumar Gala <galak@kernel.crashing.org>
3425 Date:   Thu Oct 23 00:05:47 2008 -0500
3426
3427     fdt: Add fdt_getprop_u32_default helpers
3428
3429     Add helper functions to return find a node and return it's property
3430     or a default value.
3431
3432     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3433     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3434     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
3435
3436 commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
3437 Author: Kumar Gala <galak@kernel.crashing.org>
3438 Date:   Tue Oct 21 18:06:15 2008 -0500
3439
3440     86xx: Enable 64-bit PCI resources on all Freescale boards
3441
3442     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3443     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3444
3445 commit 0151cbaccf4504821ecfde0217299bd740086bb6
3446 Author: Kumar Gala <galak@kernel.crashing.org>
3447 Date:   Tue Oct 21 11:33:58 2008 -0500
3448
3449     85xx: Enable 64-bit PCI resources on all Freescale boards
3450
3451     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3452     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3453
3454 commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
3455 Author: Kumar Gala <galak@kernel.crashing.org>
3456 Date:   Tue Oct 21 08:36:08 2008 -0500
3457
3458     pci: Allow for PCI addresses to be 64-bit
3459
3460     PCI bus is inherently 64-bit.  While not all system require access to
3461     the full 64-bit PCI address range some do.  This allows those systems
3462     to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.
3463
3464     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3465     Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
3466     Acked-by: Wolfgang Denk <wd@denx.de>
3467
3468 commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
3469 Author: Dave Liu <daveliu@freescale.com>
3470 Date:   Thu Oct 23 21:18:53 2008 +0800
3471
3472     85xx: Fix the incorrect register used for DDR erratum1
3473
3474     The 8572 DDR erratum1:
3475     DDR controller may enter an illegal state when operating
3476     in 32-bit bus mode with 4-beat bursts.
3477
3478     Description:
3479     When operating with a 32-bit bus, it is recommended that
3480     DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
3481     This forces the DDR controller to use 4-beat bursts when
3482     communicating to the DRAMs. However, an issue exists that
3483     could lead to data corruption when the DDR controller is
3484     in 32-bit bus mode while using 4-beat bursts.
3485
3486     Projected Impact:
3487     If the DDR controller is operating in 32-bit bus mode with
3488     4-beat bursts, then the controller may enter into a bad state.
3489     All subsequent reads from memory is corrupted.
3490     Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
3491     Therefore, this erratum does not affect DDR3 mode.
3492
3493     Work Arounds:
3494     To work around this issue, software must set DEBUG_1[31] in
3495     DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
3496     and CCSRBAR offset + 0x6f00 for DDR_2).
3497
3498     Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
3499     as condition, but it should be DDR_SDRAM_CFG register.
3500
3501     Signed-off-by: Dave Liu <daveliu@freescale.com>
3502
3503 commit d5b693090ed08d24c18491df9d8fc7387b2906f3
3504 Author: Dave Liu <daveliu@freescale.com>
3505 Date:   Thu Oct 23 21:17:19 2008 +0800
3506
3507     85xx: remove unused config definition
3508
3509     Signed-off-by: Dave Liu <daveliu@freescale.com>
3510
3511 commit 0f060c3bf82832331a509f2e5d2442539e7aad09
3512 Author: Kumar Gala <galak@kernel.crashing.org>
3513 Date:   Thu Oct 23 01:47:38 2008 -0500
3514
3515     85xx: Add basic e500mc core support
3516
3517     Introduce CONFIG_E500MC to deal with the minor differences between
3518     e500v2 and e500mc.
3519
3520     * Certain fields of HID0/1 don't exist anymore on e500mc
3521     * Cache line size is 64-bytes on e500mc
3522     * reset value of PIR is different
3523
3524     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3525
3526 commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
3527 Author: Kumar Gala <galak@kernel.crashing.org>
3528 Date:   Thu Oct 23 01:47:37 2008 -0500
3529
3530     85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
3531
3532     Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
3533     e500mc's 64-byte cacheline properly when it gets added.
3534
3535     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3536
3537 commit 5deb8022c3749faac30e9ad9694691e2442b5c93
3538 Author: Georg Schardt <schardt@team-ctech.de>
3539 Date:   Fri Oct 24 13:51:52 2008 +0200
3540
3541     ppc4xx: New board avnet fx12 minimodul
3542
3543     This patch adds support for the avnet fx12 minimodul.
3544     It needs the "ppc4xx: Generic architecture for xilinx ppc405"
3545     patch from Ricardo.
3546
3547     Signed-off-by: Georg Schardt <schardt@team-ctech.de>
3548     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
3549     Signed-off-by: Stefan Roese <sr@denx.de>
3550
3551 commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
3552 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
3553 Date:   Tue Oct 21 18:29:46 2008 +0200
3554
3555     ppc4xx: Generic architecture for xilinx ppc405(v3)
3556
3557     As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
3558     ppc440 boards, this patch presents a common architecture for all the
3559     xilinx ppc405 boards.
3560
3561     Any custom xilinx ppc405 board can be added very easily with no code
3562     duplicity.
3563
3564     This patch also adds a simple generic board, that can be used on almost
3565     any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h
3566
3567     This patch is prepared to work with the latest version of EDK (10.1)
3568
3569     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
3570     Signed-off-by: Stefan Roese <sr@denx.de>
3571
3572 commit 485c00a57fab86f72a3769480c66bf1ca22e1459
3573 Author: Stefan Roese <sr@denx.de>
3574 Date:   Fri Oct 24 08:56:09 2008 +0200
3575
3576     ppc4xx: Disable DDR2 autocalibration on Kilauea for now
3577
3578     Since the new autocalibration still has some problems on some Kilauea
3579     boards with 200MHz DDR2 frequency we disable the autocalibration and
3580     use the hardcoded values as done before. This seems to work reliably
3581     on all known DDR2 frequencies.
3582
3583     After the autocalibration issue is fixed we will enable it again.
3584
3585     Signed-off-by: Stefan Roese <sr@denx.de>
3586
3587 commit f177f4250c729727b1629fa8d8d6556c999e9b8c
3588 Author: Mike Frysinger <vapier@gentoo.org>
3589 Date:   Wed Apr 9 02:02:07 2008 -0400
3590
3591     Blackfin: fix up UART status bit handling
3592
3593     Some Blackfin UARTs are read-to-clear while others are write-to-clear.
3594     This can cause problems when we poll the LSR and then later try and handle
3595     any errors detected.
3596
3597     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3598
3599 commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
3600 Author: Mike Frysinger <vapier@gentoo.org>
3601 Date:   Sat Oct 11 20:42:17 2008 -0400
3602
3603     Blackfin: bf561-ezkit: drop redundant code
3604
3605     Common Blackfin code already announces CPU information.
3606
3607     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3608
3609 commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
3610 Author: Mike Frysinger <vapier@gentoo.org>
3611 Date:   Sat Oct 11 20:43:10 2008 -0400
3612
3613     Blackfin: bf561-ezkit: drop pointless USB code
3614
3615     The USB/LAN register settings are not actually used/needed in order to
3616     drive things from U-Boot, so drop the code.
3617
3618     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3619
3620 commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
3621 Author: Mike Frysinger <vapier@gentoo.org>
3622 Date:   Sat Oct 11 20:47:58 2008 -0400
3623
3624     Blackfin: linker scripts: force start.o and set initcode boundaries
3625
3626     Make sure that the start.o object is always the first object in our linker
3627     script regardless of configuration settings, and add some linker symbols
3628     so the ldr utility can properly locate the initcode when generating a LDR.
3629
3630     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3631
3632 commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
3633 Author: Mike Frysinger <vapier@gentoo.org>
3634 Date:   Sat Oct 11 21:19:39 2008 -0400
3635
3636     Blackfin: small cpu init optimization while setting interrupt mask
3637
3638     Use the sti instruction to set the initial interrupt mask rather than
3639     banging on the core IMASK MMR to save both space and time.
3640
3641     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3642
3643 commit 960922291c9594acb575cec7e47d7bed9b58182c
3644 Author: Mike Frysinger <vapier@gentoo.org>
3645 Date:   Sat Oct 11 21:18:10 2008 -0400
3646
3647     Blackfin: set initial stack correctly according to Blackfin ABI
3648
3649     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3650
3651 commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
3652 Author: Mike Frysinger <vapier@gentoo.org>
3653 Date:   Sun Apr 20 03:11:53 2008 -0400
3654
3655     Blackfin: make baud calculation more accurate
3656
3657     We should use the algorithm in the Linux kernel so that the UART divisor
3658     calculation is more accurate.  It also fixes problems on some picky UARTs
3659     that have sampling anomalies.
3660
3661     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3662
3663 commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
3664 Author: Mike Frysinger <vapier@gentoo.org>
3665 Date:   Mon Oct 6 04:21:41 2008 -0400
3666
3667     Blackfin: decode hwerrcause/excause when crashing
3668
3669     Having to decode hwerrcause/excause values is a pain, so automate it.
3670
3671     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3672
3673 commit 2de95bb20c488f20298df6881b700a5a757ee780
3674 Author: Mike Frysinger <vapier@gentoo.org>
3675 Date:   Mon Oct 6 04:20:54 2008 -0400
3676
3677     Blackfin: fix register dump messages
3678
3679     Make sure we report RETI/IPEND correctly.
3680
3681     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3682
3683 commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
3684 Author: Mike Frysinger <vapier@gentoo.org>
3685 Date:   Mon Oct 6 04:19:34 2008 -0400
3686
3687     Blackfin: don't bother displaying reboot msg when crashing
3688
3689     The hang function already tells you to reboot, so no point in showing it
3690     twice.
3691
3692     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3693
3694 commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
3695 Author: Mike Frysinger <vapier@gentoo.org>
3696 Date:   Sun Jun 1 01:23:48 2008 -0400
3697
3698     Blackfin: enable support for nested interrupts
3699
3700     During cpu init, make sure we initialize the CEC properly so that
3701     interrupts can fire and be handled while U-Boot is running.
3702
3703     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3704
3705 commit 39782727e185860faa4884c2b04e84cb33d1c6cf
3706 Author: Mike Frysinger <vapier@gentoo.org>
3707 Date:   Mon Oct 6 03:55:25 2008 -0400
3708
3709     Blackfin: init NAND before relocating env
3710
3711     If booting out of NAND, we need to make sure we initialize it properly
3712     before attempting to relocate the environment.
3713
3714     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3715
3716 commit 0f9a8819416ba40a53de50af148847a0e508f84d
3717 Author: Mike Frysinger <vapier@gentoo.org>
3718 Date:   Thu Aug 7 18:40:13 2008 -0400
3719
3720     Blackfin: check cache bits, not cplb bits
3721
3722     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3723
3724 commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
3725 Author: Mike Frysinger <vapier@gentoo.org>
3726 Date:   Thu Aug 7 17:52:59 2008 -0400
3727
3728     Blackfin: drop unused cache flush code
3729
3730     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3731
3732 commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
3733 Author: Mike Frysinger <vapier@gentoo.org>
3734 Date:   Thu Aug 7 15:21:47 2008 -0400
3735
3736     Blackfin: unify cache handling code
3737
3738     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3739
3740 commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
3741 Author: Mike Frysinger <vapier@gentoo.org>
3742 Date:   Mon Oct 6 03:39:07 2008 -0400
3743
3744     Blackfin: only initialize the RTC when actually used
3745
3746     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3747
3748 commit 621e579b812dd1a2e6777f7cbf6e55e736505823
3749 Author: Mike Frysinger <vapier@gentoo.org>
3750 Date:   Mon Oct 6 03:44:33 2008 -0400
3751
3752     Blackfin: fix SWRST register definition
3753
3754     The SWRST register is a 16bit, not 32bit, register.
3755
3756     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3757
3758 commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
3759 Author: Mike Frysinger <vapier@gentoo.org>
3760 Date:   Thu Aug 7 18:54:57 2008 -0400
3761
3762     Blackfin: build with -fomit-frame-pointer
3763
3764     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3765
3766 commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
3767 Author: Mike Frysinger <vapier@gentoo.org>
3768 Date:   Thu Aug 7 17:50:26 2008 -0400
3769
3770     Blackfin: document some of the blackfin directories
3771
3772     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3773
3774 commit e4337968e43698a68ba608369f46d4a4114111ca
3775 Author: Mike Frysinger <vapier@gentoo.org>
3776 Date:   Thu Aug 7 15:16:56 2008 -0400
3777
3778     Blackfin: only enable hardware error irq by default
3779
3780     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3781
3782 commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
3783 Author: Mike Frysinger <vapier@gentoo.org>
3784 Date:   Thu Aug 7 13:36:43 2008 -0400
3785
3786     Blackfin: punt old unused mem_init.h header
3787
3788     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3789
3790 commit bcc121a01608042066a19ab5bff5bcfb805bf406
3791 Author: Mike Frysinger <vapier@gentoo.org>
3792 Date:   Thu Aug 7 13:18:55 2008 -0400
3793
3794     Blackfin: delete unused page_descriptor_table_size define
3795
3796     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3797
3798 commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
3799 Author: Mike Frysinger <vapier@gentoo.org>
3800 Date:   Thu Aug 7 13:17:03 2008 -0400
3801
3802     Blackfin: fix typo in boot mode comment and add NAND define
3803
3804     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3805
3806 commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
3807 Author: Ben Maan <moo@cow>
3808 Date:   Thu Aug 7 13:14:21 2008 -0400
3809
3810     Blackfin: fix port mux defines for BF54x
3811
3812     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3813
3814 commit 0656ef2ba274910d31364fe022f6c7db0051660d
3815 Author: Mike Frysinger <vapier@gentoo.org>
3816 Date:   Thu Aug 7 13:09:50 2008 -0400
3817
3818     Blackfin: update anomaly lists
3819
3820     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3821
3822 commit 50ca95402876cf7bac4e2d4f7855f616a038763f
3823 Author: Mike Frysinger <vapier@gentoo.org>
3824 Date:   Thu Aug 7 13:08:54 2008 -0400
3825
3826     Blackfin: unify DSPID/DBGSTAT MMR definitions
3827
3828     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3829
3830 commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
3831 Author: Wolfgang Denk <wd@denx.de>
3832 Date:   Tue Oct 21 15:53:51 2008 +0200
3833
3834     Fix strmhz(): avoid printing negative fractions
3835
3836     Signed-off-by: Wolfgang Denk <wd@denx.de>
3837
3838 commit 4a7f6b750d8de543fdf8e58acd86745010054571
3839 Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
3840 Date:   Fri Oct 17 08:55:51 2008 -0400
3841
3842     mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function
3843
3844     This is done to allow other 83XX based platforms which also have UPM
3845     (e.g. 8360) to configure and use their UPM in u-boot.
3846
3847     Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
3848     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3849
3850 commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
3851 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3852 Date:   Tue Oct 14 22:58:53 2008 +0400
3853
3854     mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
3855
3856     With this patch u-boot can fixup the dr_mode and phy_type properties
3857     for the Dual-Role USB controller.
3858
3859     While at it, also remove #ifdefs around includes, they are not needed.
3860
3861     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3862     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3863
3864 commit b3379f3fd13969934c00097c05754e7a8990fd39
3865 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3866 Date:   Wed Oct 8 20:52:54 2008 +0400
3867
3868     mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
3869
3870     Though NAND chip is replaceable on the MPC837XE-MDS boards, the
3871     current settings don't work with the default chip on the board.
3872     Nevertheless Freescale's U-Boot sets the option register correctly,
3873     so I just dumped the register from the working u-boot. My guess is
3874     that the old settings were applicable for some pilot boards, not
3875     found in the production.
3876
3877     This patch also enables FSL ELBC driver so that we could access
3878     the NAND storage in the u-boot.
3879
3880     The NAND support costs about 45KB, so the u-boot no longer fits
3881     into two 128KB NOR flash sectors, thus we also have to adjust
3882     environment location: add another 128KB to the monitor length.
3883
3884     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3885
3886     It is due to hardware design and logic defect, that is the
3887     I/O[0:7] of NAND chip is connected to LAD[7:0], so when
3888     the NAND chip connected to nLCS3,  you have to set up the
3889     OR3[BCTLD] = '1' for normal operation, otherwise it will have
3890     bus contention due to the pin 48/25 of U60 is enabled.
3891
3892     Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
3893     asserted upon access to the NAND chip, keep the default state.
3894
3895     Acked-by: Dave Liu <daveliu@freescale.com>
3896     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3897
3898 commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
3899 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3900 Date:   Thu Oct 2 19:17:33 2008 +0400
3901
3902     mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
3903
3904     The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
3905     standalone or acting as a PCI agent. User's Guide says:
3906
3907     - When the CPLD recognizes its location on the PIB it automatically
3908       configures RCW to the PCI Host.
3909     - If the CPLD fails to recognize its location then it is automatically
3910       configured as an Agent and the PCI is configured to an external arbiter.
3911
3912     This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
3913     flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
3914     PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
3915     any arbiter bad things will happen (here the board hangs during any config
3916     space reads).
3917
3918     In this situation we must disable the PCI. And in case of anybody really
3919     want to use an external arbiter, we provide "pci_external_aribter"
3920     environment variable.
3921
3922     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3923     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3924
3925 commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
3926 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3927 Date:   Thu Oct 2 18:32:25 2008 +0400
3928
3929     mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
3930
3931     This involves configuring the SerDes and fixing up the flags and
3932     PHY addresses for the TSECs.
3933
3934     For Linux we also fix up the device tree.
3935
3936     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3937     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3938
3939 commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
3940 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3941 Date:   Thu Oct 2 18:31:59 2008 +0400
3942
3943     mpc83xx: add TSECs' HRCWH masks for MPC837x processors
3944
3945     We'll use these masks to parse TSEC modes out of HRCWH.
3946
3947     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3948     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3949
3950 commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
3951 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3952 Date:   Thu Oct 2 18:31:56 2008 +0400
3953
3954     mpc83xx: serdes: add forgotten shifts for rfcks
3955
3956     The rfcks should be shifted by 28 bits left. We didn't notice the bug
3957     because we were using only 100MHz clocks (for which rfcks == 0).
3958
3959     Though, for SGMII we'll need 125MHz clocks.
3960
3961     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3962     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3963
3964 commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
3965 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3966 Date:   Thu Oct 2 18:31:53 2008 +0400
3967
3968     mpc83xx: fix serdes setup for the MPC8378E boards
3969
3970     MPC837xE specs says that SerDes1 has:
3971
3972     — Two lanes running x1 SGMII at 1.25 Gbps;
3973     — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
3974
3975     And for SerDes2:
3976
3977     — Two lanes running x1 PCI Express at 2.5 Gbps;
3978     — One lane running x2 PCI Express at 2.5 Gbps;
3979     — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
3980
3981     The spec also explicitly states that PEX options are not valid for
3982     the SD1.
3983
3984     Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
3985     which is wrong to do.
3986
3987     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3988     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3989
3990 commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
3991 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3992 Date:   Wed Sep 10 18:12:37 2008 +0400
3993
3994     mpc83xx: mpc8360emds: rework LBC SDRAM setup
3995
3996     Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
3997     it difficult to use (b/c then the memory is discontinuous and
3998     there is quite big memory hole between the DDR/SDRAM regions).
3999
4000     This patch reworks LBC SDRAM setup so that now we dynamically
4001     place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
4002     DDR memory).
4003
4004     With this patch we're able to:
4005
4006     - Boot without external DDR memory;
4007     - Use most "DDR + SDRAM" setups without need to support for
4008       sparse/discontinuous memory model in the software.
4009
4010     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4011     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4012
4013 commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
4014 Author: Wolfgang Denk <wd@xpert.denx.de>
4015 Date:   Tue Oct 21 11:23:56 2008 +0200
4016
4017     FDT: don't use private kernel header files
4018
4019     On some systems (for example Fedora Core 4) U-Boot builds with the
4020     following wanrings only:
4021
4022     ...
4023     In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
4024                      from fdt.c:51:
4025                  /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!
4026
4027     This patch fixes this problem.
4028
4029     Signed-off-by: Wolfgang Denk <wd@denx.de>
4030
4031 commit f4d14c55504ce40287321bd63ee269e3233ee4ae
4032 Author: Stefan Roese <sr@denx.de>
4033 Date:   Mon Oct 13 15:15:31 2008 +0200
4034
4035     ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup
4036
4037     Signed-off-by: Stefan Roese <sr@denx.de>
4038
4039 commit 43cbce69d48d052574d71f50724be546d90a46a4
4040 Author: Stefan Roese <sr@denx.de>
4041 Date:   Mon Oct 13 10:45:14 2008 +0200
4042
4043     ppc4xx: Correctly setup ranges property in ebc node
4044
4045     Previously only the NOR flash mapping was written into the ranges
4046     property of the ebc node. This patch now writes all enabled chip
4047     select areas into the ranges property.
4048
4049     Signed-off-by: Stefan Roese <sr@denx.de>
4050
4051 commit d7b26d58328f137471ea97de382bfa63f7239931
4052 Author: Dirk Eibach <eibach@gdsys.de>
4053 Date:   Wed Oct 8 15:37:50 2008 +0200
4054
4055     ppc4xx: Add GDSys neo 405EP board support
4056
4057     Signed-off-by: Dirk Eibach <eibach@gdsys.de>
4058     Signed-off-by: Stefan Roese <sr@denx.de>
4059
4060 commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
4061 Author: Niklaus Giger <niklaus.giger@netstal.com>
4062 Date:   Wed Oct 1 14:46:13 2008 +0200
4063
4064     ppc4xx: Update configs for Netstal boards
4065
4066     I reorganized my config files, putting the common stuff into netstal-common.h
4067     (got the idea by looking a amcc-common.h from Stefan).
4068
4069     Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).
4070
4071     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4072     Signed-off-by: Stefan Roese <sr@denx.de>
4073
4074 commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
4075 Author: Adam Graham <agraham@amcc.com>
4076 Date:   Wed Oct 8 10:13:19 2008 -0700
4077
4078     ppc4xx: Add routine to retrieve CPU number
4079
4080     Provide a weak defined routine to retrieve the CPU number for
4081     reference boards that have multiple CPU's.  Default behavior
4082     is the existing single CPU print output.  Reference boards with
4083     multiple CPU's need to provide a board specific routine.
4084     See board/amcc/arches/arches.c for an example.
4085
4086     Signed-off-by: Adam Graham <agraham@amcc.com>
4087     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
4088     Signed-off-by: Stefan Roese <sr@denx.de>
4089
4090 commit 59217bae40e90982ab5400d849c08af683ace036
4091 Author: Adam Graham <agraham@amcc.com>
4092 Date:   Wed Oct 8 10:13:14 2008 -0700
4093
4094     ppc4xx: Add static support for 44x IBM SDRAM Controller
4095
4096     This patch add the capability to configure a PPC440 based IBM SDRAM
4097     Controller with static, compiled-in, values. PPC440 memory subsystem
4098     includes a Memory Queue core.
4099
4100     Signed-off-by: Adam Graham <agraham@amcc.com>
4101     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
4102     Signed-off-by: Stefan Roese <sr@denx.de>
4103
4104 commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
4105 Author: Adam Graham <agraham@amcc.com>
4106 Date:   Wed Oct 8 10:12:53 2008 -0700
4107
4108     ppc4xx: Add AMCC Arches board support (dual 460GT)
4109
4110     The Arches Evaluation board is based on the AMCC 460GT SoC chip.
4111     This board is a dual processor board with each processor providing
4112     independent resources for Rapid IO, Gigabit Ethernet, and serial
4113     communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
4114     FLASH, UART, EEPROM and temperature sensor, along with a shared debug
4115     port. The two 460GT's will communicate with each other via shared
4116     memory, Gigabit Ethernet and x1 PCI-Express.
4117
4118     Signed-off-by: Adam Graham <agraham@amcc.com>
4119     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
4120     Signed-off-by: Stefan Roese <sr@denx.de>
4121
4122 commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
4123 Author: Wolfgang Denk <wd@xpert.denx.de>
4124 Date:   Sun Oct 19 21:54:30 2008 +0200
4125
4126     TQM8260: environment in flash instead EEPROM, baudrate 115k
4127
4128     Several customers have reported problems with the environment in
4129     EEPROM, including corrupted content after board reset. Probably the
4130     code to prevent I2C Enge Conditions is not working sufficiently.
4131
4132     We move the environment to flash now, which allows to have a backup
4133     copy plus gives much faster boot times.
4134
4135     Also, change the default console initialization to 115200 bps as used
4136     on most other boards.
4137
4138     Signed-off-by: Wolfgang Denk <wd@denx.de>
4139
4140 commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
4141 Author: Kumar Gala <galak@kernel.crashing.org>
4142 Date:   Sun Oct 19 12:49:19 2008 -0500
4143
4144     85xx: Fix compile warning in mpc8536ds.c
4145
4146     mpc8536ds.c: In function 'is_sata_supported':
4147     mpc8536ds.c:615: warning: unused variable 'devdisr'
4148
4149     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4150
4151 commit 8ed44d91c8122d00368523b0b746691c895d3b3c
4152 Author: Wolfgang Denk <wd@denx.de>
4153 Date:   Sun Oct 19 02:35:50 2008 +0200
4154
4155     Cleanup: fix "MHz" spelling
4156
4157     Signed-off-by: Wolfgang Denk <wd@denx.de>
4158
4159 commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
4160 Author: Wolfgang Denk <wd@denx.de>
4161 Date:   Sun Oct 19 02:35:49 2008 +0200
4162
4163     Use strmhz() to format clock frequencies
4164
4165     Signed-off-by: Wolfgang Denk <wd@denx.de>
4166
4167 commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
4168 Author: Wolfgang Denk <wd@denx.de>
4169 Date:   Sun Oct 19 02:35:48 2008 +0200
4170
4171     strmhz(): Round numbers when printing clock frequencies
4172
4173     Round clock frequencies for printing.
4174
4175     Many boards printed off clock frequencies like 399 MHz instead of the
4176     exact 400 MHz because numberes were not rounded. This is fixed now.
4177
4178     Signed-off-by: Wolfgang Denk <wd@denx.de>
4179
4180 commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
4181 Author: Timur Tabi <timur@freescale.com>
4182 Date:   Mon Oct 20 15:16:47 2008 -0500
4183
4184     85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
4185
4186     Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
4187     to add a comment that the correct value disagrees with the 8544 reference
4188     manual.  The changelog for that commit is also wrong, as it says "bit 28"
4189     when it should be "bit 24".
4190
4191     Signed-off-by: Timur Tabi <timur@freescale.com>
4192
4193 commit 360fe71e82b83e264c964c9447c537e9a1f643c8
4194 Author: Heiko Schocher <hs@denx.de>
4195 Date:   Fri Oct 17 18:24:06 2008 +0200
4196
4197     mgcoge: add redundant environment sector
4198
4199     Signed-off-by: Heiko Schocher <hs@denx.de>
4200
4201 commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
4202 Author: Heiko Schocher <hs@denx.de>
4203 Date:   Fri Oct 17 18:23:27 2008 +0200
4204
4205     mgsuvd: update size of environment
4206
4207     Signed-off-by: Heiko Schocher <hs@denx.de>
4208
4209 commit 2e26d837f11460c0e6dede7d65424a31e0183d09
4210 Author: Jason Jin <Jason.jin@freescale.com>
4211 Date:   Fri Oct 10 11:41:00 2008 +0800
4212
4213     Enabled the Freescale SGMII riser card on 8536DS
4214
4215     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
4216
4217 commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
4218 Author: Liu Yu <yu.liu@freescale.com>
4219 Date:   Fri Oct 10 11:40:59 2008 +0800
4220
4221     Enabled the Freescale SGMII riser card on 8572DS
4222
4223     This patch based on Andy's work.
4224     Including command 'pixis_set_sgmii' support.
4225
4226     Signed-off-by: Liu Yu <yu.liu@freescale.com>
4227
4228 commit bff188baf9427c35745356439435acf3864d4c65
4229 Author: Liu Yu <yu.liu@freescale.com>
4230 Date:   Fri Oct 10 11:40:58 2008 +0800
4231
4232     Make pixis_set_sgmii more general to support MPC85xx boards.
4233
4234     The pixis sgmii command depend on the FPGA support on the board, some 85xx
4235     boards support SGMII riser card but did not support this command, define
4236     CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
4237
4238     Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
4239     are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
4240     PIXIS_VCFGEN1_MASK in header file for both boards.
4241
4242     Signed-off-by: Liu Yu <yu.liu@freescale.com>
4243
4244 commit 5e981d683d2363204c76773941c2e9c2044c808f
4245 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4246 Date:   Wed Oct 8 23:38:02 2008 -0500
4247
4248     Add cpu/8xxx to TAGS_SUBDIRS
4249
4250     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4251
4252 commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
4253 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4254 Date:   Thu Oct 9 01:25:55 2008 -0500
4255
4256     fsl_law clear enable before changing.
4257
4258     Debug sessions may have left enabled laws.
4259     Changing lawbar with an unkown enabled tgtid could cause problems.
4260
4261     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4262
4263 commit 86be510f7b5443e7e937f696bfbe037fdc740b15
4264 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4265 Date:   Thu Oct 9 00:29:27 2008 -0500
4266
4267     mpc8572 additional end-point mode
4268
4269     mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
4270     Include host_agent == 0 decode for end-point determination.
4271
4272     This is not needed for the ds reference board since pcie3 will be a host
4273     in order to connect to the uli chip.  Include it here as a reference for
4274     other mpc8572 boards.
4275
4276     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4277
4278 commit 6856b3d0221a838580e6bb06f61425fd7529ba93
4279 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4280 Date:   Wed Oct 8 23:37:59 2008 -0500
4281
4282     85xx if NUM_CPUS>1, print cpu number
4283
4284     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4285
4286 commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
4287 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4288 Date:   Wed Oct 8 23:38:01 2008 -0500
4289
4290     pixis do not print long help if not configured
4291
4292     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4293
4294 commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
4295 Author: Andy Fleming <afleming@freescale.com>
4296 Date:   Tue Oct 7 08:09:50 2008 -0500
4297
4298     Have u-boot pass stashing parameters into device tree
4299
4300     Some cores don't support ethernet stashing at all, and some
4301     instances have errata.  Adds 3 properties to gianfar nodes
4302     which support stashing.  For now, just add this support to
4303     85xx SoCs.
4304
4305     Signed-off-by: Andy Fleming <afleming@freescale.com>
4306
4307 commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
4308 Author: Haiying Wang <Haiying.Wang@freescale.com>
4309 Date:   Fri Oct 3 12:37:57 2008 -0400
4310
4311     Add DDR options setting on MPC8641HPCN board
4312
4313     * Add board specific parameter table to choose correct cpo, clk_adjust,
4314     write_data_delay based on board ddr frequency and n_ranks.
4315
4316     * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
4317
4318     Signed-off-by: James Yang <James.Yang@freescale.com>
4319     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4320
4321 commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
4322 Author: Haiying Wang <Haiying.Wang@freescale.com>
4323 Date:   Fri Oct 3 12:37:41 2008 -0400
4324
4325     Add ddr interleaving suppport for MPC8572DS board
4326
4327     * Add board specific parameter table to choose correct cpo, clk_adjust,
4328     write_data_delay, 2T based on board ddr frequency and n_ranks.
4329
4330     * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
4331
4332     * Set memory controller interleaving mode to bank interleaving, and disable
4333     bank(chip select) interleaving mode by default, because the default on-board
4334     DDR DIMMs are 2x512MB single-rank.
4335
4336     * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.
4337
4338     Signed-off-by: James Yang <James.Yang@freescale.com>
4339     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4340
4341 commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
4342 Author: Haiying Wang <Haiying.Wang@freescale.com>
4343 Date:   Fri Oct 3 12:37:26 2008 -0400
4344
4345     Add debug information for DDR controller registers
4346
4347     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4348
4349 commit c9ffd839b1ada502c86f88edaf1534426b6688ce
4350 Author: Haiying Wang <Haiying.Wang@freescale.com>
4351 Date:   Fri Oct 3 12:37:10 2008 -0400
4352
4353     Check DDR interleaving mode
4354
4355     * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
4356     ba_intlv_ctl.
4357     * Print DDR interleaving mode information
4358     * Add doc/README.fsl-ddr to describe the interleaving setting
4359
4360     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4361
4362 commit dfb49108e4f86c2224e1f30124328b0de66ef72e
4363 Author: Haiying Wang <Haiying.Wang@freescale.com>
4364 Date:   Fri Oct 3 12:36:55 2008 -0400
4365
4366     Pass dimm parameters to populate populate controller options
4367
4368     Because some dimm parameters like n_ranks needs to be used with the board
4369     frequency to choose the board parameters like clk_adjust etc. in the
4370     board_specific_paramesters table of the board ddr file, we need to pass
4371     the dimm parameters to the board file.
4372
4373     * move ddr dimm parameters header file from /cpu to /include directory.
4374     * add ddr dimm parameters to populate board specific options.
4375     * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.
4376
4377     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4378
4379 commit dbbbb3abeff325855cae76e33d69d5665631443f
4380 Author: Haiying Wang <Haiying.Wang@freescale.com>
4381 Date:   Fri Oct 3 12:36:39 2008 -0400
4382
4383     Make DDR interleaving mode work correctly
4384
4385     Fix some bugs:
4386       1. Correctly set intlv_ctl in cs_config.
4387       2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
4388       3. Set base_address and total memory for each ddr controller in memory
4389          controller interleaving mode.
4390
4391     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4392
4393 commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
4394 Author: Kumar Gala <galak@kernel.crashing.org>
4395 Date:   Mon Sep 22 23:40:42 2008 -0500
4396
4397     85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
4398
4399     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4400
4401 commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
4402 Author: Kumar Gala <galak@kernel.crashing.org>
4403 Date:   Mon Sep 22 14:11:11 2008 -0500
4404
4405     85xx: Improve flash remapping on MPC8572DS & MPC8536DS
4406
4407     Changing the flash from cacheable to cache-inhibited was taking a significant
4408     amount of time due to the fact that we were iterating over the full 256M of
4409     flash.  Instead we can just flush the L1 d-cache and invalidate the i-cache.
4410
4411     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4412
4413 commit 54e091d3b603a3332c619199ca83a07e95960da4
4414 Author: Kumar Gala <galak@kernel.crashing.org>
4415 Date:   Mon Sep 22 14:11:10 2008 -0500
4416
4417     85xx: Export invalidate_{i,d}cache and add flush_dcache
4418
4419     Added the ability for C code to invalidate the i/d-cache's and
4420     to flush the d-cache.  This allows us to more efficient change mappings
4421     from cache-able to cache-inhibited.
4422
4423     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4424
4425 commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
4426 Author: Heiko Schocher <hs@denx.de>
4427 Date:   Fri Oct 17 16:11:52 2008 +0200
4428
4429     mgcoge, mgsuvd: extract more common code
4430
4431     in ft_blob_update () for both boards was an unneccessary
4432     repetition of code, which this patch moves in a common
4433     function for this boards.
4434
4435     Signed-off-by: Heiko Schocher <hs@denx.de>
4436
4437 commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
4438 Author: Heiko Schocher <hs@denx.de>
4439 Date:   Fri Oct 17 12:15:55 2008 +0200
4440
4441     mgcoge, mgsuvd: use in_*/out_* accesors
4442
4443     Signed-off-by: Heiko Schocher <hs@denx.de>
4444
4445 commit a21ca95f8b9dca22714952b348e4905ac157b5cd
4446 Author: Heiko Schocher <hs@denx.de>
4447 Date:   Fri Oct 17 13:52:51 2008 +0200
4448
4449     mgsuvd: fix compiler warning when using soft_i2c driver
4450
4451     Signed-off-by: Heiko Schocher <hs@denx.de>
4452
4453 commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
4454 Author: Heiko Schocher <hs@denx.de>
4455 Date:   Fri Oct 17 12:15:05 2008 +0200
4456
4457     mgsuvd: fix coding style
4458
4459     Signed-off-by: Heiko Schocher <hs@denx.de>
4460
4461 commit 5f4c3137f4f051787707c548133823f1656eb508
4462 Author: Heiko Schocher <hs@denx.de>
4463 Date:   Fri Oct 17 12:13:30 2008 +0200
4464
4465     mgcoge: Second Flash on CS5 not on CS1
4466
4467     Signed-off-by: Heiko Schocher <hs@denx.de>
4468
4469 commit 76da19df5b8e186d269f29190696bd31fb6c836b
4470 Author: Kumar Gala <galak@kernel.crashing.org>
4471 Date:   Thu Oct 16 21:52:08 2008 -0500
4472
4473     Added arch_lmb_reserve to allow arch specific memory regions protection
4474
4475     Each architecture has different ways of determine what regions of memory
4476     might not be valid to get overwritten when we boot.  This provides a
4477     hook to allow them to reserve any regions they care about.  Currently
4478     only ppc, m68k and sparc need/use this.
4479
4480     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4481
4482 commit e02d4a9904c8f36395994c0c81469d552b82f5ea
4483 Author: Heiko Schocher <hs@denx.de>
4484 Date:   Thu Oct 16 16:32:35 2008 +0200
4485
4486     mgcoge: added CONFIG_FIT to support the new u-boot image format
4487
4488     Signed-off-by: Heiko Schocher <hs@denx.de>
4489
4490 commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
4491 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4492 Date:   Thu Oct 16 15:01:15 2008 +0200
4493
4494     rename CFG_ macros to CONFIG_SYS
4495
4496     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4497
4498 commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
4499 Author: Kumar Gala <galak@kernel.crashing.org>
4500 Date:   Mon Oct 13 14:12:55 2008 -0500
4501
4502     74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version
4503
4504     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4505
4506 commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
4507 Author: Kumar Gala <galak@kernel.crashing.org>
4508 Date:   Tue Sep 23 10:05:02 2008 -0500
4509
4510     Expose command table search for sub-commands
4511
4512     Sub-command can benefit from using the same table and search functions
4513     that top level commands have.  Expose this functionality by refactoring
4514     find_cmd() and introducing find_cmd_tbl() that sub-command processing
4515     can call.
4516
4517     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4518
4519 commit f7e51b27508446f8cae3927975817137979ad5e8
4520 Author: Heiko Schocher <hs@denx.de>
4521 Date:   Wed Oct 15 09:41:33 2008 +0200
4522
4523     mgsuvd, mgcoge: added BOOTCOUNT feature.
4524
4525     Signed-off-by: Heiko Schocher <hs@denx.de>
4526
4527 commit 8f64da7f83b553889bc08400c97047998382e9d2
4528 Author: Heiko Schocher <hs@denx.de>
4529 Date:   Wed Oct 15 09:41:00 2008 +0200
4530
4531     mgcoge, mgsuvd: added support for the IVM EEprom.
4532
4533     The EEprom contains some Manufacturerinformation,
4534     which are read from u-boot at boot time, and saved
4535     in same hush shell variables.
4536
4537     Signed-off-by: Heiko Schocher <hs@denx.de>
4538
4539 commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
4540 Author: Heiko Schocher <hs@denx.de>
4541 Date:   Wed Oct 15 09:40:28 2008 +0200
4542
4543     hush: add showvar command for hush shell.
4544
4545     This new command shows the local variables defined in
4546     the hush shell:
4547
4548     => help showvar
4549     showvar
4550         - print values of all hushshell variables
4551     showvar name ...
4552         - print value of hushshell variable 'name'
4553
4554     Also make the set_local_var() and unset_local_var ()
4555     no longer static, so it is possible to define local
4556     hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
4557     is defined, u-boot calls hush_init_var (), where
4558     boardspecific code can define local hush shell
4559     variables at boottime.
4560
4561     Signed-off-by: Heiko Schocher <hs@denx.de>
4562
4563 commit 67b23a322848d828a5e45c0567b72762bfde7abf
4564 Author: Heiko Schocher <hs@denx.de>
4565 Date:   Wed Oct 15 09:39:47 2008 +0200
4566
4567     I2C: adding new "i2c bus" Command to the I2C Subsystem.
4568
4569     With this Command it is possible to add new I2C Busses,
4570     which are behind 1 .. n I2C Muxes. Details see README.
4571
4572     Signed-off-by: Heiko Schocher <hs@denx.de>
4573
4574 commit c24853644ddd2dd2e4246b5854a93e6254a14092
4575 Author: Heiko Schocher <hs@denx.de>
4576 Date:   Wed Oct 15 09:39:08 2008 +0200
4577
4578     mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
4579
4580     As documented in doc/I2C_Edge_Conditions, adding a
4581     board specific deblocking mechanism via CFG_I2C_INIT_BOARD
4582     for the mgcoge and mgsuvd board.
4583
4584     This code was originally written by Keymile in association
4585     with Anatech and Atmel in 1998. The Code toggels the SCL
4586     until the SCA line goes to HIGH (max. 16 times).
4587     And after this, a start condition is sent.
4588
4589     This is another approach to deblock the I2C Bus. The
4590     soft I2C driver actually sends 9 clocks with SDA High,
4591     and then a stop at the end, to deblock the I2C Bus.
4592
4593     Maybe we should use the approach from Keymile as
4594     the new standard?
4595
4596     Signed-off-by: Heiko Schocher <hs@denx.de>
4597
4598 commit 4ca107effebfbabac1057c39632105dacef95957
4599 Author: Heiko Schocher <hs@denx.de>
4600 Date:   Wed Oct 15 09:38:38 2008 +0200
4601
4602     soft_i2c: Add CFG_I2C_INIT_BOARD option
4603
4604     This patch adds the option for a boardspecific
4605     I2C deblocking mechanism for the soft i2c driver.
4606
4607     Signed-off-by: Heiko Schocher <hs@denx.de>
4608
4609 commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
4610 Author: Heiko Schocher <hs@denx.de>
4611 Date:   Wed Oct 15 09:38:07 2008 +0200
4612
4613     mgcoge, mgsuvd: add DTT (LM75) support.
4614
4615     Signed-off-by: Heiko Schocher <hs@denx.de>
4616
4617 commit 8e442df438ab677057571e3ac01846bff7719bce
4618 Author: Heiko Schocher <hs@denx.de>
4619 Date:   Wed Oct 15 09:37:34 2008 +0200
4620
4621     lm75: Make the LM75 MULTI_BUS compatible.
4622
4623     Signed-off-by: Heiko Schocher <hs@denx.de>
4624
4625 commit 12f1678127c1df2b2878ba93c88948bedc060775
4626 Author: Heiko Schocher <hs@denx.de>
4627 Date:   Wed Oct 15 09:37:04 2008 +0200
4628
4629     lm75: fix Codingstyle issues.
4630
4631     Signed-off-by: Heiko Schocher <hs@denx.de>
4632
4633 commit f2202450c75ba6934b356024101500ddcde6e2a6
4634 Author: Heiko Schocher <hs@denx.de>
4635 Date:   Wed Oct 15 09:36:33 2008 +0200
4636
4637     mgcoge, mgsuvd: added EEprom support.
4638
4639     Signed-off-by: Heiko Schocher <hs@denx.de>
4640
4641 commit 9661bf9d120f760238b2a073b84f2baf05010057
4642 Author: Heiko Schocher <hs@denx.de>
4643 Date:   Wed Oct 15 09:36:03 2008 +0200
4644
4645     mgcoge, mgsuvd: add I2C support.
4646
4647     Signed-off-by: Heiko Schocher <hs@denx.de>
4648
4649 commit 98aed379586a155292efbf3209356836584b601c
4650 Author: Heiko Schocher <hs@denx.de>
4651 Date:   Wed Oct 15 09:35:26 2008 +0200
4652
4653     soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
4654
4655     This patch fixes the following warnings, when using
4656     the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
4657     systems:
4658
4659     soft_i2c.c: In function 'send_reset':
4660     soft_i2c.c:93: warning: unused variable 'immr'
4661     soft_i2c.c: In function 'send_start':
4662     soft_i2c.c:124: warning: unused variable 'immr'
4663     soft_i2c.c: In function 'send_stop':
4664     soft_i2c.c:146: warning: unused variable 'immr'
4665     soft_i2c.c: In function 'send_ack':
4666     soft_i2c.c:171: warning: unused variable 'immr'
4667     soft_i2c.c: In function 'write_byte':
4668     soft_i2c.c:196: warning: unused variable 'immr'
4669     soft_i2c.c: In function 'read_byte':
4670     soft_i2c.c:244: warning: unused variable 'immr'
4671
4672     Signed-off-by: Heiko Schocher <hs@denx.de>
4673
4674 commit 799b784aa00cb03a352847ab9f9acdde79b72d21
4675 Author: Heiko Schocher <hs@denx.de>
4676 Date:   Wed Oct 15 09:34:45 2008 +0200
4677
4678     i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.
4679
4680     Signed-off-by: Heiko Schocher <hs@denx.de>
4681
4682 commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
4683 Author: Heiko Schocher <hs@denx.de>
4684 Date:   Wed Oct 15 09:34:05 2008 +0200
4685
4686     mgcoge: fix Coding Style issues.
4687
4688     Signed-off-by: Heiko Schocher <hs@denx.de>
4689
4690 commit e43a27c49712203fe8848a17714330623edfb2eb
4691 Author: Heiko Schocher <hs@denx.de>
4692 Date:   Wed Oct 15 09:33:30 2008 +0200
4693
4694     I2C: add new command i2c reset.
4695
4696     If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
4697     it is not possible to get out of this, until the
4698     complete Hardware gets a reset. This new commando
4699     calls again i2c_init (and that calls i2c_init_board
4700     if defined), which will deblock the I2C Bus.
4701
4702     Signed-off-by: Heiko Schocher <hs@denx.de>
4703     Signed-off-by: Wolfgang Denk <wd@denx.de>
4704
4705 commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
4706 Author: Heiko Schocher <hs@denx.de>
4707 Date:   Wed Oct 15 09:32:25 2008 +0200
4708
4709     mgsuvd, mgcoge: move this 2 boards in one dir.
4710
4711     There are some more extensions, which are for both boards
4712     and some more boards from this manufacturer will follow soon.
4713
4714     Signed-off-by: Heiko Schocher <hs@denx.de>
4715     Signed-off-by: Wolfgang Denk <wd@denx.de>
4716
4717 commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
4718 Author: Dirk Eibach <eibach@gdsys.de>
4719 Date:   Wed Oct 8 13:44:27 2008 +0200
4720
4721     hwmon: Add LM63 support
4722
4723     This patch adds support for the National LM63 temperature
4724     sensor with integrated fan control. It's used on the GDSys
4725     Neo board (405EP) which will be submitted later.
4726
4727     Signed-off-by: Dirk Eibach <eibach@gdsys.de>
4728     Acked-by: Stefan Roese <sr@denx.de>
4729
4730 commit 7ba890bf2f2b92831420243c058951aa831119fd
4731 Author: Kyungmin Park <kmpark@infradead.org>
4732 Date:   Wed Oct 8 11:01:17 2008 +0900
4733
4734     Add Red Black Tree support
4735
4736     Now it's used at UBI module. Of course other modules can use it.
4737     If you want to use it, please define CONFIG_RBTREE
4738
4739     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
4740
4741 commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
4742 Author: richardretanubun <richardretanubun@ruggedcom.com>
4743 Date:   Mon Oct 6 16:10:53 2008 -0400
4744
4745     CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c
4746
4747     Added support for CONFIG_EFI_PARTITION to ext2 commands.
4748     Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
4749
4750 commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
4751 Author: richardretanubun <richardretanubun@ruggedcom.com>
4752 Date:   Fri Sep 26 11:13:22 2008 -0400
4753
4754     Add support for CONFIG_EFI_PARTITION (GUID Partition Table)
4755
4756     The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
4757     of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table
4758
4759     Based on linux/fs/partitions/efi.[ch]
4760
4761     Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
4762
4763 commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
4764 Author: Bartlomiej Sieka <tur@semihalf.com>
4765 Date:   Wed Oct 1 15:26:32 2008 +0200
4766
4767     FIT: output image load address for type 'firmware', fix message while there
4768
4769     Now that the auto-update feature uses the 'firmware' type for updates, it is
4770     useful to inspect the load address of such images.
4771
4772     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4773
4774 commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
4775 Author: Bartlomiej Sieka <tur@semihalf.com>
4776 Date:   Wed Oct 1 15:26:31 2008 +0200
4777
4778     Automatic software update from TFTP server
4779
4780     The auto-update feature allows to automatically download software updates
4781     from a TFTP server and store them in Flash memory during boot. Updates are
4782     contained in a FIT file and protected with SHA-1 checksum.
4783
4784     More detailed description can be found in doc/README.update.
4785
4786     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
4787     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4788
4789 commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
4790 Author: Bartlomiej Sieka <tur@semihalf.com>
4791 Date:   Wed Oct 1 15:26:27 2008 +0200
4792
4793     flash: factor out adjusting of Flash address to the end of sector
4794
4795     The upcoming automatic update feature needs the ability to adjust an
4796     address within Flash to the end of its respective sector. Factor out
4797     this functionality to a new function flash_sect_roundb().
4798
4799     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
4800     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4801     Signed-off-by: Stefan Roese <sr@denx.de>
4802
4803 commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
4804 Author: Bartlomiej Sieka <tur@semihalf.com>
4805 Date:   Wed Oct 1 15:26:29 2008 +0200
4806
4807     net: Make TFTP server timeout configurable
4808
4809     There are two aspects of a TFTP transfer involving timeouts:
4810     1. timeout waiting for initial server reply after sending RRQ
4811     2. timeouts while transferring actual data from the server
4812
4813     Since the upcoming auto-update feature attempts a TFTP download during each
4814     boot, it is undesirable to have a long delay when the TFTP server is not
4815     available. Thus, this commit makes the server timeout (1.) configurable by two
4816     global variables:
4817
4818     TftpRRQTimeoutMSecs
4819     TftpRRQTimeoutCountMax
4820
4821     TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
4822     server, TftpRRQTimeoutCountMax overrides default number of connection retries.
4823     The total delay when trying to download a file from a non-existing TFTP server
4824     is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.
4825
4826     Timeouts during file transfers (2.) are unaffected.
4827
4828     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
4829     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4830     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4831
4832 commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
4833 Author: Bartlomiej Sieka <tur@semihalf.com>
4834 Date:   Wed Oct 1 15:26:28 2008 +0200
4835
4836     net: express the first argument to NetSetTimeout() in milliseconds
4837
4838     Enforce millisecond semantics of the first argument to NetSetTimeout() --
4839     the change is transparent for well-behaving boards (CFG_HZ == 1000 and
4840     get_timer() countiing in milliseconds).
4841
4842     Rationale for this patch is to enable millisecond granularity for
4843     network-related timeouts, which is needed for the upcoming automatic
4844     software update feature.
4845
4846     Summary of changes:
4847     - do not scale the first argument to NetSetTimeout() by CFG_HZ
4848     - change timeout values used in the networking code to milliseconds
4849
4850     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
4851     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4852     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4853
4854 commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
4855 Author: richardretanubun <richardretanubun@ruggedcom.com>
4856 Date:   Mon Sep 29 18:28:23 2008 -0400
4857
4858     Adds two more ethernet interface to 83xx
4859
4860     Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
4861     Six eth interface is chosen because the platform I am using combines
4862     UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
4863
4864     Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
4865     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4866
4867 commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
4868 Author: Haiying Wang <Haiying.Wang@freescale.com>
4869 Date:   Wed Sep 24 11:42:12 2008 -0500
4870
4871     Change UEC PHY interface to RGMII on MPC8568MDS
4872
4873     Change UEC phy interface from GMII to RGMII on MPC8568MDS board
4874
4875     Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
4876     but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
4877
4878     Now both UEC1 and UEC2 can work properly under u-boot.
4879
4880     It is also in consistent with the kernel setting for 8568 UEC phy interface.
4881
4882     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4883     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4884
4885 commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
4886 Author: Wolfgang Denk <wd@denx.de>
4887 Date:   Sat Oct 18 21:30:31 2008 +0200
4888
4889     Prepare v2008.10 release: update CHANGELOG & Makefile
4890
4891     Signed-off-by: Wolfgang Denk <wd@denx.de>
4892
4893 commit f7a35a60cf45491871a5c28e9ad24db005487857
4894 Author: Heiko Schocher <hs@denx.de>
4895 Date:   Fri Oct 17 18:24:06 2008 +0200
4896
4897     mgcoge: add redundant environment sector
4898
4899     Signed-off-by: Heiko Schocher <hs@denx.de>
4900     Signed-off-by: Wolfgang Denk <wd@denx.de>
4901
4902 commit c2537ee85954af9d036b18b644f3e18d837bf4a5
4903 Author: Heiko Schocher <hs@denx.de>
4904 Date:   Fri Oct 17 18:23:27 2008 +0200
4905
4906     mgsuvd: update size of environment
4907
4908     Signed-off-by: Heiko Schocher <hs@denx.de>
4909
4910 commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
4911 Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
4912 Date:   Thu Oct 16 13:38:00 2008 -0500
4913
4914     83xx NAND boot: wait for LTESR[CC]
4915
4916     At least some revisions of the 8313, and possibly other chips, do not
4917     wait for all pages of the initial 4K NAND region to be loaded before
4918     beginning execution; thus, we wait for it before branching out of the
4919     first NAND page.
4920
4921     This fixes warm reset problems when booting from NAND on 8313erdb.
4922
4923     Signed-off-by: Scott Wood <scottwood@freescale.com>
4924     Acked-by: Kim Phillips <kim.phillips@freescale.com>
4925
4926 commit bf29e0ea0af03d593c64614136acc723a7a022a2
4927 Author: Yuri Tikhonov <yur@emcraft.com>
4928 Date:   Fri Oct 17 12:54:18 2008 +0200
4929
4930     ppc4xx: PPC44x MQ initialization
4931
4932     Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
4933     values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
4934     dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
4935
4936     Previously the appropriate initialization had been made in Linux, by the
4937     ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
4938     registers after normal operation has begun is not supported and could
4939     have unpredictable results.
4940
4941     Comment from Stefan: This patch doesn't change the resulting value of the
4942     MQ registers. It explicitly sets/clears all bits to the desired state which
4943     better documents the resulting register value instead of relying on pre-set
4944     default values.
4945
4946     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4947     Signed-off-by: Stefan Roese <sr@denx.de>
4948
4949 commit ec081c2c190148b374e86a795fb6b1c49caeb549
4950 Author: Stefan Roese <sr@denx.de>
4951 Date:   Fri Oct 17 12:51:46 2008 +0200
4952
4953     ppc4xx: PPC44x MQ initialization
4954
4955     Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
4956     values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
4957     dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
4958
4959     Previously the appropriate initialization had been made in Linux, by the
4960     ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
4961     registers after normal operation has begun is not supported and could
4962     have unpredictable results.
4963
4964     Comment from Stefan: This patch doesn't change the resulting value of the
4965     MQ registers. It explicitly sets/clears all bits to the desired state which
4966     better documents the resulting register value instead of relying on pre-set
4967     default values.
4968
4969     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4970     Signed-off-by: Stefan Roese <sr@denx.de>
4971
4972 commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
4973 Author: Kumar Gala <galak@kernel.crashing.org>
4974 Date:   Thu Oct 16 21:58:50 2008 -0500
4975
4976     85xx: Using proper I2C source clock divider for MPC8544
4977
4978     The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
4979     bit 26, instead it should be bit 28.  This caused in incorrect
4980     interpretation of the i2c_clk which is the same as the SEC clk on
4981     MPC8544.  The SEC clk is controlled by cfg_sec_freq that is reported
4982     in PORDEVSR2.
4983
4984     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4985
4986 commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
4987 Author: Kumar Gala <galak@kernel.crashing.org>
4988 Date:   Thu Oct 16 21:58:49 2008 -0500
4989
4990     Revert "85xx: Using proper I2C source clock divider for MPC8544"
4991
4992     This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
4993
4994     The fix introduced by this patch is not correct.  The problem is
4995     that the documentation is not correct for the MPC8544 with regards
4996     to which bit in PORDEVSR2 is for the SEC_CFG.
4997
4998     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4999
5000 commit 2179c4766bffeece98e5e92040629a96c97e230c
5001 Author: Kumar Gala <galak@kernel.crashing.org>
5002 Date:   Wed Oct 15 10:19:41 2008 -0500
5003
5004     85xx: Fix compile warning
5005
5006     mpc8536ds.c: In function 'is_sata_supported':
5007     mpc8536ds.c:614: warning: unused variable 'devdisr'
5008
5009     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5010
5011 commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
5012 Author: Jason Jin <Jason.jin@freescale.com>
5013 Date:   Wed Oct 15 10:40:24 2008 +0800
5014
5015     Fix the function conflict in x86emu when DEBUG is on
5016
5017     The function parse_line() in common/main.c was exposed globally by commit
5018     6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
5019     name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
5020     This patch fix this by renaming the function in the debug.c file.
5021
5022     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
5023
5024 commit b4dbacf69a669a17487054552fc2761149dd6767
5025 Author: Wolfgang Denk <wd@denx.de>
5026 Date:   Wed Oct 15 15:50:45 2008 +0200
5027
5028     Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
5029
5030     Signed-off-by: Wolfgang Denk <wd@denx.de>
5031
5032 commit 374b9038293d01d8744a46af9b7854a6fd99b228
5033 Author: Heiko Schocher <hs@denx.de>
5034 Date:   Wed Oct 15 09:51:19 2008 +0200
5035
5036     Fix compiler warning in lib_ppc/board.c
5037
5038     Fix compiler warning introduced by commit 0f8cbc18
5039
5040     Signed-off-by: Heiko Schocher <hs@denx.de>
5041     Signed-off-by: Wolfgang Denk <wd@denx.de>
5042
5043 commit 9724555755a6f1066636481b41f7094e0ce93a69
5044 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
5045 Date:   Thu Oct 9 10:29:14 2008 +0530
5046
5047     mpc83xx: wait till UPM completes the write to array
5048
5049     Reference manual states that MxMR[MAD] increment is the indication
5050     of write to UPM array is complete. Honour that. Also, make the dummy
5051     write explicit.
5052
5053     also fix the comment.
5054
5055     Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
5056     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5057
5058 commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
5059 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
5060 Date:   Wed Oct 8 18:12:20 2008 -0500
5061
5062     Remove unwanted ';' at end of define.
5063
5064     Currently this is not creating any problem. But it will result
5065     in compilation error when used as below.
5066
5067     printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
5068
5069     Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
5070
5071     continuation of the theme based on git grep "^#define CFG_.*;$" include/
5072
5073     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5074
5075 commit b2934a56650e9a6c54432f9ce6dc36757967385e
5076 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5077 Date:   Mon Oct 6 10:53:59 2008 -0400
5078
5079     ARM DaVinci: Add maintainer information for SFFSDR board.
5080
5081     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5082
5083 commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
5084 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5085 Date:   Sat Oct 4 19:26:16 2008 +0200
5086
5087     api: fix type mismatch
5088
5089     This patch fixes a type mismatch and thus removes a compiler
5090     warning when compiling with CONFIG_API on powerpc.
5091
5092     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5093
5094 commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
5095 Author: Peter Tyser <ptyser@xes-inc.com>
5096 Date:   Wed Oct 1 12:25:04 2008 -0500
5097
5098     cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
5099
5100     Original code displayed:
5101      => help i2c
5102      i2c i2c speed [speed] - show or set I2C bus speed
5103      i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
5104      ...
5105
5106     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
5107
5108 commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
5109 Author: Wolfgang Denk <wd@denx.de>
5110 Date:   Tue Oct 14 22:13:41 2008 +0200
5111
5112     Update CHANGELOG
5113
5114     Signed-off-by: Wolfgang Denk <wd@denx.de>
5115
5116 commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
5117 Author: Jason Jin <Jason.jin@freescale.com>
5118 Date:   Fri Oct 10 11:41:01 2008 +0800
5119
5120     Do not init SATA when disabled on 8536DS.
5121
5122     SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
5123     driver still try to access the SATA registers, the cpu will hangup.
5124     This patch try to fix this by reading the serdes status before the SATA
5125     initialize.
5126
5127     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
5128     Acked-by: Andy Fleming <afleming@freescale.com>
5129
5130 commit 9dbc366744960013965fce8851035b6141f3b3ae
5131 Author: Remy Bohmer <linux@bohmer.net>
5132 Date:   Fri Oct 10 10:23:22 2008 +0200
5133
5134     The PIPE_INTERRUPT flag is used wrong
5135
5136     At a lot of places in the code the PIPE_INTERRUPT flags and friends
5137     are used wrong. The wrong bits are compared to this flag resulting
5138     in wrong conditions. Also there are macros that should be used for
5139     PIPE_* flags.
5140     This patch tries to fix them all, however, I was not able to test the
5141     changes, because I do not have any of these boards.
5142
5143     Review required!
5144
5145     Signed-off-by: Remy Bohmer <linux@bohmer.net>
5146     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5147
5148 commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
5149 Author: Remy Bohmer <linux@bohmer.net>
5150 Date:   Fri Oct 10 10:23:21 2008 +0200
5151
5152     fix USB initialisation procedure
5153
5154     The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
5155     At some places directly 8,16,32,64 was used instead of the encoded
5156     value. Made a enum for the options to make this more clear and to help
5157     preventing similar errors in the future.
5158
5159     After fixing this bug it became clear that another bug existed where
5160     the 'pipe' is and-ed with PIPE_* flags, where it should have been
5161     'usb_pipetype(pipe)', or even better usb_pipeint(pipe).
5162
5163     Also removed the triple 'get_device_descriptor' sequence, it has no use,
5164     and Windows nor Linux behaves that way.
5165     There is also a poll going on with a timeout when usb_control_msg() fails.
5166     However, the poll is useless, because the flag will never be set on a error,
5167     because there is no code that runs in a parallel that can set this flag.
5168     Changed this to something more logical.
5169
5170     Tested on AT91SAM9261ek and compared the flow on the USB bus to what
5171     Linux is doing. There is no difference anymore in the early initialisation
5172     sequence.
5173
5174     Signed-off-by: Remy Bohmer <linux@bohmer.net>
5175     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5176
5177 commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
5178 Author: Nikita V. Youshchenko <yoush@cs.msu.su>
5179 Date:   Fri Oct 3 00:03:55 2008 +0400
5180
5181     fsl_diu: fix alignment error that caused malloc corruption
5182
5183     When aligning malloc()ed screen_base, invalid offset was added.
5184     This not only caused misaligned result (which did not cause hardware
5185     misbehaviour), but - worse - caused screen_base + smem_len to
5186     be out of malloc()ed space, which in turn caused breakage of
5187     futher malloc()/free() operation.
5188
5189     This patch fixes screen_base alignment.
5190
5191     Also this patch makes memset() that cleans framebuffer to be executed
5192     on first initialization of diu, not only on re-initialization. It looks
5193     correct to clean the framebuffer instead of displaying random garbage;
5194     I believe that was disabled only because that memset caused breakage
5195     of malloc/free described above - which no longer happens with the fix
5196     described above.
5197
5198     Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
5199
5200 commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
5201 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5202 Date:   Wed Sep 24 10:29:37 2008 +0200
5203
5204     api: Fix building with CONFIG_API
5205
5206     This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
5207
5208     USB_MAX_STOR_DEV is defined in include/usb.h, but
5209     needed in api/api_storage.c.
5210
5211     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5212
5213 commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
5214 Author: Peter Tyser <ptyser@xes-inc.com>
5215 Date:   Tue Sep 23 12:39:40 2008 -0500
5216
5217     Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
5218
5219     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
5220
5221 commit 81e612014c40c922ec35488d17c504d4e9286f06
5222 Author: Peter Tyser <ptyser@xes-inc.com>
5223 Date:   Tue Sep 23 12:38:42 2008 -0500
5224
5225     Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
5226
5227     The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
5228     CFG_EEPROM_PAGE_WRITE_BITS in various temperature
5229     sensor drivers are not necessary
5230
5231     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
5232
5233 commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
5234 Author: Mike Frysinger <vapier@gentoo.org>
5235 Date:   Tue Oct 14 07:04:38 2008 -0400
5236
5237     cmd_spi: remove broken signed casting for display
5238
5239     Since we're working with unsigned data, you can't apply a signed pointer
5240     cast and then attempt to print the result.  Otherwise you get wrong output
5241     when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
5242
5243     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5244
5245 commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
5246 Author: Mike Frysinger <vapier@gentoo.org>
5247 Date:   Tue Oct 14 07:05:24 2008 -0400
5248
5249     strings cmd: drop old CONFIG_CFG_STRINGS define
5250
5251     We don't need CONFIG_CFG_STRINGS anymore now that we have the define
5252     CONFIG_CMD_STRINGS and Makefile control.
5253
5254     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5255
5256 commit fecb5ade3b37f62981f2b05b621005850173aaa9
5257 Author: Jason Jin <Jason.jin@freescale.com>
5258 Date:   Fri Sep 19 17:32:49 2008 +0800
5259
5260     Fix the NAND size overflow issue.
5261
5262     When the total size of all NAND devices exceeds 4 GiB, the size  will
5263     overflow. This patch tries to fix this.
5264
5265     Note that we still have a problem when a single NAND device is bigger
5266     than 4 GiB: then the overflow would actually happen earlier, i. e.
5267     when storing the size in nand_info[].size, as nand_info[].size is an
5268     "u_int32_t".
5269
5270     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
5271     Signed-off-by: Wolfgang Denk <wd@denx.de>
5272
5273 commit 30f574717277238b9014b8136c90eea77196490f
5274 Author: Louis Su <louis@asix.com.tw>
5275 Date:   Wed Jul 9 11:01:37 2008 +0800
5276
5277     AX88180: new gigabit network driver
5278
5279     Signed-off-by: Louis Su <louis@asix.com.tw>
5280     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5281
5282 commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
5283 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
5284 Date:   Tue Aug 19 16:07:03 2008 +0200
5285
5286     enable 10/100M at VSC8601 at tsec driver
5287
5288     Currently VSC8601 doesn't link with 10/100M partners if the
5289     EEPROM/Strapping is not set up.
5290     Setting the auto-neg register fixes this.
5291
5292     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
5293     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5294
5295 commit 702c85b0e876d587c11acdbb55738ee52acd54f4
5296 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5297 Date:   Tue Sep 30 15:02:53 2008 +0900
5298
5299     net: ne2000: Divided a function of NE2000 driver
5300
5301     get_prom function was used __attriute__ , but it is not enable.
5302     ax88796.o does not do link besides ne2000.o. When ld is carried
5303     out, get_prom function of ax88796.c is ignored.
5304     This problem is a thing by specifications of ld.
5305     I checked and test this patch on SuperH and MIPS.
5306
5307     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5308     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5309
5310 commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
5311 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5312 Date:   Tue Oct 14 11:10:59 2008 +0900
5313
5314     sh: rsk7203: Add smc911x driver support to board config file
5315
5316     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5317     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5318
5319 commit cae6f909baf86357b3c0bd01acfc414348c4d175
5320 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5321 Date:   Thu Oct 9 13:54:33 2008 +0900
5322
5323     sh: Fix cannot execute a stand-alone application
5324
5325     Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
5326
5327     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5328     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5329
5330 commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
5331 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
5332 Date:   Wed Oct 8 23:38:00 2008 -0500
5333
5334     fsl_pci_init do not scan bus when configured as an end-point
5335
5336     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
5337     Acked-by: Andy Fleming <afleming@freescale.com>
5338
5339 commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
5340 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5341 Date:   Tue Sep 16 17:07:53 2008 -0400
5342
5343     ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
5344
5345     This is no longer necessary now that the GD_FLG_RELOC flag is set for
5346     all ARM boards.
5347
5348     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5349
5350 commit d977a57356657ba241256231efca32828a5822f9
5351 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
5352 Date:   Sat Sep 13 10:04:32 2008 +0200
5353
5354     Fix lzma uncompress call (image_start wrongly used instead image_len)
5355
5356     Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
5357
5358 commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
5359 Author: Nick Spence <nick.spence@freescale.com>
5360 Date:   Thu Aug 28 14:09:15 2008 -0700
5361
5362     mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
5363
5364     This is needed in unlock_ram_in_cache() because it is called from C and
5365     will corrupt the small data area anchor that is kept in R2.
5366
5367     lock_ram_in_cache() is modified similarly as good coding practice, but
5368     is not called from C.
5369
5370     Signed-off-by: Nick Spence <nick.spence@freescale.com>
5371
5372 commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
5373 Author: Kumar Gala <galak@kernel.crashing.org>
5374 Date:   Tue Aug 19 15:05:34 2008 -0500
5375
5376     86xx: remove redudant code with lib_ppc/interrupts.c
5377
5378     For some reason we duplicated the majority of code in lib_ppc/interrupts.c
5379     Not know how that happened, but there is no good reason for it.
5380
5381     Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
5382     they exist.
5383
5384     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5385
5386 commit 0d01f66d235118515b5086b88f82498bc0695d6a
5387 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
5388 Date:   Thu Oct 9 01:26:36 2008 -0500
5389
5390     CFI: cfi_flash write fix for AMD legacy
5391
5392     The flash_unlock_seq requires a sector for AMD_LEGACY.
5393     Fix a retcode check typeo.
5394
5395     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
5396     Signed-off-by: Stefan Roese <sr@denx.de>
5397
5398 commit 542b385a620a1783454a00424930e51895f45073
5399 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5400 Date:   Tue Oct 7 13:13:10 2008 +0200
5401
5402     ppc4xx: Fix USB 2.0 phy reset sequence
5403
5404     This patch fixes USB 2.0 communication issues on some DU440 boards.
5405
5406     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5407     Signed-off-by: Stefan Roese <sr@denx.de>
5408
5409 commit df8c1ce11114c2260dedb5547281945f7db8fa5c
5410 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5411 Date:   Tue Oct 7 13:13:09 2008 +0200
5412
5413     ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
5414
5415     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5416     Signed-off-by: Stefan Roese <sr@denx.de>
5417
5418 commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
5419 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5420 Date:   Tue Oct 7 13:13:08 2008 +0200
5421
5422     ppc4xx: Fix DU440 GPIO configuration
5423
5424     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5425     Signed-off-by: Stefan Roese <sr@denx.de>
5426
5427 commit 35dd025c70fcc4389317db2f2a9d14795172137d
5428 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5429 Date:   Tue Oct 7 13:13:07 2008 +0200
5430
5431     ppc4xx: Update DU440 config
5432
5433     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5434     Signed-off-by: Stefan Roese <sr@denx.de>
5435
5436 commit f3bf9273939ffe1a60a32a2eef909097f15df56b
5437 Author: Kumar Gala <galak@kernel.crashing.org>
5438 Date:   Wed Oct 8 15:36:39 2008 -0500
5439
5440     MPC8572DS: Fix compile warnings
5441
5442     Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
5443     compile warnings:
5444
5445     cmd_i2c.c:112: warning: missing braces around initializer
5446     cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
5447
5448     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5449
5450 commit dffd2446fb041f38ef034b0fcf41e51e5e489159
5451 Author: Wolfgang Grandegger <wg@grandegger.com>
5452 Date:   Tue Sep 30 10:55:57 2008 +0200
5453
5454     85xx: Using proper I2C source clock divider for MPC8544
5455
5456     Measurements with our MPC8544 board showed that the I2C bus frequency
5457     is wrong by a factor of 1.5. Obviously, the interpretation of the
5458     MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
5459     correct. There seems to be an error in the 8544 RM.
5460
5461     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5462
5463 commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
5464 Author: Rafal Czubak <rcz@semihalf.com>
5465 Date:   Wed Oct 8 13:41:30 2008 +0200
5466
5467     FSL: Fix get_cpu_board_revision() return value.
5468
5469     get_cpu_board_revision() returned board revision based on information stored
5470     in global static struct eeprom. It should instead use one from local struct
5471     board_eeprom, to which the data is actually read from EEPROM. The bug led to
5472     system hang after printing L1 cache information on U-Boot startup. The problem
5473     was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
5474     boards using CFG_I2C_EEPROM_CCID.
5475
5476     The change has been successfully tested on MPC8555CDS system.
5477
5478     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
5479
5480 commit 747f316cca484ed627a97dd3391febabce384186
5481 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5482 Date:   Tue Sep 30 20:08:49 2008 +0200
5483
5484     update uImage FIT multi documentation
5485
5486     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5487
5488 commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
5489 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5490 Date:   Tue Sep 30 20:08:36 2008 +0200
5491
5492     move README.imx31 to doc/ and merge with README.mx31
5493
5494     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5495
5496 commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
5497 Author: Guennadi Liakhovetski <lg@denx.de>
5498 Date:   Thu Sep 25 20:54:37 2008 +0200
5499
5500     i.MX31: switch to CFG_HZ=1000
5501
5502     Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
5503     cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
5504     provides 2% or 0.4% precision depending on the
5505     CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
5506     boot-delay.
5507
5508     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5509
5510 commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
5511 Author: gnusercn <gnusercn@gmail.com>
5512 Date:   Wed Oct 8 18:58:58 2008 +0200
5513
5514     Fix bug: in arch-arm, env_get_char dose not work fine
5515
5516     due to the arm implementation which supposed that U-Boot is in RAM
5517     when we jump to start_armboot
5518
5519     Signed-off-by: gnusercn <gnusercn@gmail.com>
5520     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5521
5522 commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
5523 Author: Adam Graham <agraham@amcc.com>
5524 Date:   Mon Oct 6 10:16:13 2008 -0700
5525
5526     ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
5527
5528     After changing SDRAM_CLKTR phase value rerun the memory preload
5529     initialization sequence (INITPLR) to reset and relock the memory
5530     DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
5531     adjustment effects the phase relationship of the internal, to the
5532     PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
5533
5534     Signed-off-by: Adam Graham <agraham@amcc.com>
5535     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
5536     Signed-off-by: Stefan Roese <sr@denx.de>
5537
5538 commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
5539 Author: Haiying Wang <Haiying.Wang@freescale.com>
5540 Date:   Fri Oct 3 11:48:03 2008 -0400
5541
5542     Remove redundant #define for MPC8536DS
5543
5544     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5545
5546 commit 445a7b38308eb05b41de74165b20855db58c7ee5
5547 Author: Haiying Wang <Haiying.Wang@freescale.com>
5548 Date:   Fri Oct 3 11:47:30 2008 -0400
5549
5550     Add ID EEPROM support for MPC8572DS
5551
5552     The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
5553     system information like mac addresses etc. This patch enables it.
5554
5555     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5556
5557 commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
5558 Author: Haiying Wang <Haiying.Wang@freescale.com>
5559 Date:   Fri Oct 3 11:46:59 2008 -0400
5560
5561     Minor fixes for I2C address on MPC8572DS
5562
5563     MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
5564     according to the board spec, and adds the 2nd i2c bus offset.
5565
5566     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5567
5568 commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
5569 Author: Jason Jin <Jason.jin@freescale.com>
5570 Date:   Sat Sep 27 14:40:57 2008 +0800
5571
5572     Fix the incorrect DDR clk freq reporting on 8536DS
5573
5574     On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
5575     The display is still sync mode DDR freq. This patch try to fix
5576     this. The display DDR freq is now the actual freq in both
5577     sync and async mode.
5578
5579     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
5580
5581 commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
5582 Author: Kumar Gala <galak@kernel.crashing.org>
5583 Date:   Tue Oct 7 10:28:46 2008 -0500
5584
5585     85xx: Remove setting of *cache-line-size in device trees
5586
5587     ePAPR says if the *cache-block-size is the same as *cache-line-size
5588     than we don't need the *cache-line-size property.
5589
5590     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5591
5592 commit cd3cb0d9269d155276b00207e3816a9347fd1c92
5593 Author: Gerald Van Baren <vanbaren@cideas.com>
5594 Date:   Sat Oct 4 07:56:06 2008 -0400
5595
5596     libfdt: Fix error in documentation for fdt_get_alias_namelen()
5597
5598     Oops, screwed up the function name in the documenting comment for this
5599     function.  Trivial correction in this patch.
5600
5601     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5602     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
5603
5604 commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
5605 Author: David Gibson <david@gibson.dropbear.id.au>
5606 Date:   Wed Aug 20 16:55:14 2008 +1000
5607
5608     libfdt: Add function to explicitly expand aliases
5609
5610     Kumar has already added alias expansion to fdt_path_offset().
5611     However, in some circumstances it may be convenient for the user of
5612     libfdt to explicitly get the string expansion of an alias.  This patch
5613     adds a function to do this, fdt_get_alias(), and uses it to implement
5614     fdt_path_offset().
5615
5616     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5617
5618 commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
5619 Author: Mike Frysinger <vapier@gentoo.org>
5620 Date:   Thu Oct 2 01:55:38 2008 -0400
5621
5622     cfi_flash: do not reset flash when probe fails
5623
5624     The CFI flash driver starts at flash_init() which calls down into
5625     flash_get_size().  This starts by calling flash_detect_cfi().  If said
5626     function fails, flash_get_size() finishes by attempting to reset the
5627     flash.  Unfortunately, it does this with an info->portwidth set to 0x10
5628     which filters down into flash_make_cmd() and that happily smashes the
5629     stack by sticking info->portwidth bytes into a cfiword_t variable that
5630     lives on the stack.  On a 64bit system you probably won't notice, but
5631     killing the last 8 bytes on a 32bit system usually leads to a corrupt
5632     return address.  Which is what happens on a Blackfin system.
5633
5634     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5635     Signed-off-by: Stefan Roese <sr@denx.de>
5636
5637 commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
5638 Author: Stefan Roese <sr@denx.de>
5639 Date:   Fri Sep 26 17:03:26 2008 +0200
5640
5641     fdt: Overwrite /chosen node in bootm if it already exists in the dtb
5642
5643     Set force parameter in fdt_chosen() call in do_bootm_linux() call.
5644     Without this, the chosen node is not overwritten if it already
5645     exists.
5646
5647     Signed-off-by: Stefan Roese <sr@denx.de>
5648
5649 commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
5650 Author: Jon Loeliger <jdl@freescale.com>
5651 Date:   Thu Sep 25 11:02:17 2008 -0500
5652
5653     Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
5654
5655     Using Gcc 4.3 detected this problem:
5656
5657         ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
5658         ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
5659         occur when assuming that (X + c) < X is always false
5660
5661     To fix the problem, treat the offset as an unsigned int.
5662
5663     The problem report and proposed fix were provided
5664     by Steve Papacharalambous <stevep@freescale.com>.
5665
5666     Signed-off-by: Jon Loeliger <jdl@freescale.com>
5667
5668 commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
5669 Author: David Gibson <david@gibson.dropbear.id.au>
5670 Date:   Fri Aug 29 14:19:13 2008 +1000
5671
5672     libfdt: Fix bugs in fdt_get_path()
5673
5674     The current implementation of fdt_get_path() has a couple of bugs,
5675     fixed by this patch.
5676
5677     First, contrary to its documentation, on success it returns the length
5678     of the node's path, rather than 0.  The testcase is correspondingly
5679     wrong, and the patch fixes this as well.
5680
5681     Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
5682     instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
5683     Specifically this happens when there is insufficient space even to
5684     hold the path's second last component.  This behaviour is corrected,
5685     and the testcase updated to check it.
5686
5687     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5688
5689 commit 33af3e6656e84660d397b5dd95abab2dccc36f83
5690 Author: Wolfgang Denk <wd@denx.de>
5691 Date:   Wed Oct 1 12:34:58 2008 +0200
5692
5693     TQM5200: enable support for ATAPI devices
5694
5695     Signed-off-by: Wolfgang Denk <wd@denx.de>
5696
5697 commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
5698 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5699 Date:   Mon Sep 15 05:48:25 2008 +0200
5700
5701     Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
5702
5703     we need this due to the arm implementation which supposed that U-Boot
5704     is in RAM when we jump to start_armboot
5705
5706     This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
5707     in order to do it for all arm board
5708
5709     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5710
5711 commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
5712 Author: Kim Phillips <kim.phillips@freescale.com>
5713 Date:   Wed Sep 24 08:46:25 2008 -0500
5714
5715     mpc83xx: don't disable autoboot
5716
5717     bootdelay set to -1 'permanently' disables autobooting, even if
5718     bootcmd is specified.  Change to a positive value to allow
5719     autobooting when a bootcmd is set.
5720
5721     Reported-by: Coray Tate <Coray.Tate@freescale.com>
5722     Cc: Scott Wood <scottwood@freescale.com>
5723     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5724
5725 commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
5726 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5727 Date:   Wed Sep 24 10:42:15 2008 +0900
5728
5729     mpc83xx: Fix typo in include/mpc83xx.h
5730
5731     Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
5732
5733     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5734     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5735
5736 commit 162c41c03179727a1d14262f703c9a8bc40231fa
5737 Author: Kim Phillips <kim.phillips@freescale.com>
5738 Date:   Tue Sep 23 09:38:49 2008 -0500
5739
5740     mpc83xx: add h/w flash protection to board configs
5741
5742     the operating system may leave flash in a h/w locked state after writing.
5743     This allows u-boot to continue to write flash by enabling h/w unlocking
5744     by default.
5745
5746     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5747
5748 commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
5749 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5750 Date:   Thu Sep 11 21:35:36 2008 +0400
5751
5752     mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
5753
5754     The spd_dram code shifts the base address, then masks 20 bits, but
5755     forgets to shift the base address back. Fix this by just masking the
5756     base address correctly.
5757
5758     Found this bug while trying to relocate a DDR memory at the base != 0.
5759
5760     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5761     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5762
5763 commit 8fd4166c467a46773f80208bda1ec3b4757747bc
5764 Author: Stefan Roese <sr@denx.de>
5765 Date:   Mon Sep 22 16:10:43 2008 +0200
5766
5767     ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
5768
5769     Depending on the configuration jumper "SATA SELECT", U-Boot disabled
5770     either one PCIe node or the SATA node in the device tree blob. This
5771     patch removes the unnecessary and even confusing warning, when the node
5772     is not found at all.
5773
5774     Signed-off-by: Stefan Roese <sr@denx.de>
5775
5776 commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
5777 Author: Remy Bohmer <linux@bohmer.net>
5778 Date:   Fri Sep 19 13:30:06 2008 +0200
5779
5780     Add missing device types to dev_print() in part.c
5781
5782     Signed-off-by: Remy Bohmer <linux@bohmer.net>
5783
5784 commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
5785 Author: Wolfgang Denk <wd@denx.de>
5786 Date:   Mon Sep 22 22:23:06 2008 +0200
5787
5788     Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
5789     eventually leads to a machine check. This change assures that DPRAM
5790     is allocated only once in that case.
5791
5792     Signed-off-by: Gary Jennejohn <garyj@denx.de>
5793     Signed-off-by: Wolfgang Denk <wd@denx.de>
5794
5795 commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
5796 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
5797 Date:   Wed Sep 17 17:57:34 2008 +0200
5798
5799     Fix Spartan-3 definitions.
5800
5801     A few Spartan-3 definitions erroneously use Spartan-3E size
5802     constants. This patch fixes them.
5803
5804     Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
5805
5806 commit 28113e1f0da4146b823ffce37680d31d5685a60b
5807 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
5808 Date:   Wed Sep 17 17:41:58 2008 +0200
5809
5810     Remove duplicate Spartan-3E definition.
5811
5812     Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
5813     Signed-off-by: Wolfgang Denk <wd@denx.de>
5814
5815 commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
5816 Author: Anatolij Gustschin <agust@denx.de>
5817 Date:   Wed Sep 17 13:46:17 2008 +0200
5818
5819     socrates: change default mtest address range
5820
5821     Running mtest command on socrates without specifying
5822     an address range crashes the board. This patch changes
5823     default mtest address range to prevent this behavior.
5824
5825     Signed-off-by: Anatolij Gustschin <agust@denx.de>
5826
5827 commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
5828 Author: Anatolij Gustschin <agust@denx.de>
5829 Date:   Wed Sep 17 12:34:45 2008 +0200
5830
5831     socrates: fix crash after relocation
5832
5833     Currently U-Boot crashes after relocation to RAM.
5834     Changing the CPO value of the DDR SDRAM TIMING_CFG_2
5835     register to READ_LAT + 1 (to the value it was before
5836     conversion of socrates to new DDR code) fixes the
5837     problem.
5838
5839     Signed-off-by: Anatolij Gustschin <agust@denx.de>
5840
5841 commit 562788b0a303f3528b920d81f547f5ca77ba528e
5842 Author: Anatolij Gustschin <agust@denx.de>
5843 Date:   Wed Sep 17 11:45:51 2008 +0200
5844
5845     socrates: fix SPD EEPROM address
5846
5847     Commit be0bd8234b9777ecd63c4c686f72af070d886517
5848     changed SPD EEPROM address to 0x51 and DDR SDRAM
5849     detection stopped working. Change this address
5850     back to 0x50.
5851
5852     Signed-off-by: Anatolij Gustschin <agust@denx.de>
5853
5854 commit 023824549a370bd185d7129d9a6c86f9be7b86a8
5855 Author: Stefan Roese <sr@denx.de>
5856 Date:   Mon Sep 22 11:06:50 2008 +0200
5857
5858     Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
5859
5860     This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
5861
5862     Signed-off-by: Stefan Roese <sr@denx.de>
5863
5864 commit e58c41e26cf3c8accd60311be579f452e368e97e
5865 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5866 Date:   Thu Sep 18 20:13:08 2008 +0900
5867
5868     usb: Fix compile warning of r8a66597-hcd
5869
5870     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5871     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5872
5873 commit b5d10a13525c07ec6374adf840d7c87553b5f189
5874 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5875 Date:   Thu Sep 18 19:34:36 2008 +0900
5876
5877     sh: Fix compile warning
5878
5879     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5880
5881 commit 4a065abf926f128beb36d93449defa0d690e7fef
5882 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5883 Date:   Thu Sep 18 19:04:26 2008 +0900
5884
5885     sh: Add support watchdog for SH4A core
5886
5887     Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
5888     And fix some compile warning.
5889
5890     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5891
5892 commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
5893 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5894 Date:   Wed Sep 17 11:45:26 2008 +0900
5895
5896     sh: Fix typo in SH serial driver
5897
5898     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5899     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5900
5901 commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
5902 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5903 Date:   Wed Sep 17 11:08:36 2008 +0900
5904
5905     sh: Add support any page size and empty_zero_page to SH Linux uImage
5906
5907     Old U-Boot supported 4KB page size only. If this version, Linux
5908     kernel can not get command line from U-Boot.
5909     SH Linux kernel can change page size and empty_zero_page.
5910     This patch support this function and fix promlem.
5911
5912     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5913     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5914
5915 commit ce9f99ddb59628f41dc534e892368a7d66dfc774
5916 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5917 Date:   Thu Aug 28 13:40:52 2008 +0900
5918
5919     sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
5920
5921     Add function of smc911x, pkt_data_pull and pkt_data_push.
5922
5923     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
5924     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5925
5926 commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
5927 Author: Wolfgang Denk <wd@denx.de>
5928 Date:   Thu Sep 18 13:57:32 2008 +0200
5929
5930     ADS5121: fix typo in "rootpath" default setting
5931
5932     Signed-off-by: Wolfgang Denk <wd@denx.de>
5933
5934 commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
5935 Author: Remy Bohmer <linux@bohmer.net>
5936 Date:   Tue Sep 16 14:55:44 2008 +0200
5937
5938     USB layer of U-Boot causes USB protocol errors while using USB memory sticks
5939
5940     There are several differences between Linux, Windows and U-boot for initialising the
5941     USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
5942     things really different, and some are wrong (compared to the USB standard).
5943
5944     This patch fixes some errors:
5945     * The NEW_init procedure that was already in the code is good, while the old procedure
5946       is wrong. See code comments for more info.
5947     * On a Control request the data returned by the device can be more than 8 bytes, while
5948       the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
5949       This results in a lot of USB sticks not being recognised, and the transmission ended
5950       frequently with a CTL:TIMEOUT Error.
5951     * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.
5952
5953     Signed-off-by: Remy Bohmer <linux@bohmer.net>
5954     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5955
5956 commit 6f5794a6f78b313231256958fd73673c6aacc116
5957 Author: Remy Bohmer <linux@bohmer.net>
5958 Date:   Tue Sep 16 14:55:43 2008 +0200
5959
5960     Refactoring parts of the common USB OHCI code
5961
5962     This patch refactors some large routines of the USB OHCI code by
5963     making some routines smaller and more readable which helps
5964     debugging and understanding the code. (Makes the code looks
5965     somewhat more like the Linux implementation.)
5966
5967     Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)
5968
5969     Signed-off-by: Remy Bohmer <linux@bohmer.net>
5970     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5971
5972 commit be19d324edc1a1d7f393d24e10d164cd94c91a00
5973 Author: Remy Bohmer <linux@bohmer.net>
5974 Date:   Tue Sep 16 14:55:42 2008 +0200
5975
5976     Fix for USB sticks not working on ARM while using GCC 4.x compilers
5977
5978     The GCC-compiler makes an optimisation error while optimising the routine
5979     usb_set_maxpacket(). This should be fixed in the compiler in the first place,
5980     but there lots of compilers out there that makes this error, that it is
5981     probably wiser to workaround it in U-boot itself.
5982
5983     What happens is that the register r3 is used as loop-counter 'i', but gets
5984     overwritten later on. From there it starts using register r3 for several other
5985     things and the assembler code is becoming a big mess. This is clearly a compiler bug.
5986
5987     This error occurs on at least several versions of Code Sourcery Lite compilers
5988     for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
5989     compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.
5990
5991     We work around it by splitting up this routine in 2 parts, and making sure that
5992     the split out part is NOT inlined any longer. This will make GCC spit out assembler
5993     that do not show this problem. Another possibility is to adapt the Makefile to stop
5994     optimisation for the complete file. I think this solution is nicer.
5995
5996     Signed-off-by: Remy Bohmer <linux@bohmer.net>
5997     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5998
5999 commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
6000 Author: Wolfgang Denk <wd@denx.de>
6001 Date:   Wed Sep 17 10:17:55 2008 +0200
6002
6003     Coding style cleanup; update CHANEGLOG
6004
6005     Signed-off-by: Wolfgang Denk <wd@denx.de>
6006
6007 commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
6008 Author: Victor Gallardo <vgallardo@amcc.com>
6009 Date:   Tue Sep 16 06:59:13 2008 -0700
6010
6011     ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
6012
6013     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
6014     Signed-off-by: Adam Graham <agraham@amcc.com>
6015     Signed-off-by: Stefan Roese <sr@denx.de>
6016
6017 commit ce47eb402c5e29a025399dc282246414fc492940
6018 Author: Peter Tyser <ptyser@xes-inc.com>
6019 Date:   Tue Sep 16 10:04:47 2008 -0500
6020
6021     Support for multiple SGMII/TBI interfaces for TSEC ethernet
6022
6023     Fix TBI PHY accesses to use the proper offset in CPU register space. The
6024     previous code would incorrectly access the TBI PHY by reading/writing to CPU
6025     register space at the same location as would be used to access external PHYs.
6026
6027     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6028     Acked-by: Andy Fleming <afleming@freescale.com>
6029
6030 commit 7c803be2eb3cae245dedda438776e08fb122250f
6031 Author: Wolfgang Denk <wd@denx.de>
6032 Date:   Tue Sep 16 18:02:19 2008 +0200
6033
6034     TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
6035
6036     After switching to using the CFI flash driver, the correct remapping
6037     of the flash banks was forgotten.
6038
6039     Also, some boards were not adapted, and the old legacy flash driver
6040     was not removed yet.
6041
6042     Signed-off-by: Wolfgang Denk <wd@denx.de>
6043
6044 commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
6045 Author: Wolfgang Denk <wd@denx.de>
6046 Date:   Sun Sep 14 00:59:35 2008 +0200
6047
6048     Prepare v2008.10-rc2
6049
6050     Signed-off-by: Wolfgang Denk <wd@denx.de>
6051
6052 commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
6053 Author: Wolfgang Denk <wd@denx.de>
6054 Date:   Sat Sep 13 02:23:05 2008 +0200
6055
6056     Coding style cleanup, update CHANGELOG
6057
6058     Signed-off-by: Wolfgang Denk <wd@denx.de>
6059
6060 commit 0c32565f536609d78feef35c88bbc39d3ac53a73
6061 Author: Peter Tyser <ptyser@xes-inc.com>
6062 Date:   Wed Sep 10 09:18:34 2008 -0500
6063
6064     Update mailing list email and archive addresses
6065
6066     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6067
6068 commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
6069 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
6070 Date:   Thu Sep 11 15:40:01 2008 +0200
6071
6072     85xx: socrates: autoprobe Lime chip
6073
6074     This patch is an attempt to implement autoprobing for the Lime
6075     presence on the bus.
6076     Configure GPCM for Lime CS2 and try to access chip ID registers.
6077     Second read atempt delivers register values if the chip is present.
6078
6079     Signed-off-by: Anatolij Gustschin <agust@denx.de>
6080
6081 commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
6082 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
6083 Date:   Thu Sep 11 15:40:01 2008 +0200
6084
6085     85xx: socrates: Add support for new image format.
6086
6087     Signed-off-by: Detlev Zundel <dzu@denx.de>
6088
6089 commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
6090 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6091 Date:   Thu Sep 11 17:28:18 2008 +0900
6092
6093     sh: Fix compile error for r2dplus
6094
6095     netdev.h was not include by r2dplus.
6096
6097     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6098
6099 commit 56844a22b76c719e600047e23b80465a44d76abd
6100 Author: Heiko Schocher <hs@denx.de>
6101 Date:   Thu Sep 11 08:11:23 2008 +0200
6102
6103     powerpc: Fix bootm to boot up again with a Ramdisk
6104
6105     Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
6106     and this stopped Linux from booting with a Ramdisk. This patch fixes
6107     this, by deleting the useless dummy mem reservation.
6108
6109     When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
6110     added to of_size, so we dont need anymore a dummy mem reservation.
6111
6112     I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
6113     system (=0x44 bytes) and rounded it up to 0x80).
6114
6115     Signed-off-by: Heiko Schocher <hs@denx.de>
6116     Acked-by: Kumar Gala <galak@kernel.crashing.org>
6117
6118 commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
6119 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
6120 Date:   Mon Sep 8 02:46:13 2008 +0200
6121
6122     Add support for LZMA uncompression algorithm.
6123
6124     Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
6125     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6126
6127 commit 0008b6d968160abe2bfd936493f3a516a7c8da20
6128 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
6129 Date:   Fri Jun 27 23:04:20 2008 +0400
6130
6131     fsl_elbc_nand: ecclayout cleanups
6132
6133     This patch deletes oobavail assignments, they're calculated by the nand
6134     core code in nand_scan_tail, plus current oobavail values are wrong for
6135     the LP NANDs.
6136
6137     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
6138     Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
6139     Signed-off-by: Scott Wood <scottwood@freescale.com>
6140
6141 commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
6142 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
6143 Date:   Fri Jun 27 23:04:13 2008 +0400
6144
6145     fsl_elbc_nand: implement support for flash-based BBT
6146
6147     This patch implements support for flash-based BBT for chips working
6148     through ELBC NAND controller, so that NAND core will not have to re-scan
6149     for bad blocks on every boot.
6150
6151     Because ELBC controller may provide HW-generated ECCs we should adjust
6152     bbt pattern and bbt version positions in the OOB free area.
6153
6154     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
6155     Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
6156     Signed-off-by: Scott Wood <scottwood@freescale.com>
6157
6158 commit 97ae023648e764f794ffb9c52da109d6caf09c47
6159 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
6160 Date:   Fri Jun 27 23:04:04 2008 +0400
6161
6162     fsl_elbc_nand: fix OOB workability for large page NAND chips
6163
6164     For large page chips, nand_bbt is looking into OOB area, and checking
6165     for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
6166     reserved for bbt means.
6167
6168     But ELBC driver is specifying ecclayout so that oobfree area starts at
6169     offset 1, so only one byte left for the bbt purposes.
6170
6171     This causes problems with any OOB users, namely JFFS2: after first mount
6172     JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
6173
6174       OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
6175       OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
6176       OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
6177       OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
6178
6179     And on the next boot, NAND core will rescan for bad blocks, then will
6180     see "0xff 0x19" pattern, and will mark all blocks as bad ones.
6181
6182     To fix the issue we should implement our own bad block pattern: just one
6183     byte at OOB start. Though, this will work only for x8 chips. For x16
6184     chips two bytes must be checked. Since ELBC driver does not support x16
6185     NANDs (yet), we're safe for now.
6186
6187     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
6188     Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
6189     Signed-off-by: Scott Wood <scottwood@freescale.com>
6190
6191 commit 7238ada313057a85409485b8ee21515dc10c07a5
6192 Author: Wolfgang Denk <wd@denx.de>
6193 Date:   Fri Sep 12 13:52:21 2008 +0200
6194
6195     MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
6196
6197     Signed-off-by: Wolfgang Denk <wd@denx.de>
6198
6199 commit b18410e508a12ba0a177dfc2a386857c806fa96d
6200 Author: Stefan Roese <sr@denx.de>
6201 Date:   Thu Sep 11 13:05:56 2008 +0200
6202
6203     ppc4xx: Enable device tree (FDT) support in zeus board port
6204
6205     Signed-off-by: Stefan Roese <sr@denx.de>
6206
6207 commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
6208 Author: Stefan Roese <sr@denx.de>
6209 Date:   Wed Sep 10 16:53:47 2008 +0200
6210
6211     ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
6212
6213     This patch fixes a problem introdiced with patch
6214     bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
6215     initdram()].
6216
6217     The boards affected are:
6218     - PCI405
6219     - PPChameleonEVB
6220     - quad100hd
6221     - taihu
6222     - zeus
6223
6224     Signed-off-by: Stefan Roese <sr@denx.de>
6225
6226 commit 61737c59a3285f6fadf96a5836879898c04ec28d
6227 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6228 Date:   Thu Sep 11 19:41:26 2008 -0400
6229
6230     ppc4xx: Add .gitignore file to xilinx-ppc440 boards
6231
6232     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6233     Signed-off-by: Stefan Roese <sr@denx.de>
6234
6235 commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
6236 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6237 Date:   Thu Sep 11 19:41:25 2008 -0400
6238
6239     ppc4xx: Fix compilation of v5fx30teval_flash
6240
6241     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6242     Signed-off-by: Stefan Roese <sr@denx.de>
6243
6244 commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
6245 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6246 Date:   Wed Sep 10 17:44:30 2008 -0400
6247
6248     ppc4xx: Fix in-tree build for ppc440-generic boards
6249
6250     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6251     Signed-off-by: Stefan Roese <sr@denx.de>
6252
6253 commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
6254 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6255 Date:   Fri Sep 12 02:20:47 2008 +0200
6256
6257     ARM: synchronize mach-types.h with linux 2.6.27-rc6
6258
6259     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6260
6261 commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
6262 Author: Jens Scharsig <esw@bus-elektronik.de>
6263 Date:   Fri Sep 12 02:20:47 2008 +0200
6264
6265     at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
6266
6267     This patch prevents linker error on AT91RM9200 boards, if
6268     CONFIG_CMD_I2_TREE is set.
6269     It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
6270
6271     Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
6272
6273 commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
6274 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
6275 Date:   Fri Sep 12 02:20:47 2008 +0200
6276
6277     ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
6278
6279     ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
6280
6281     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
6282
6283 commit 03db53335c8eba656a7c44d1555b1a4514383e33
6284 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6285 Date:   Fri Sep 12 02:20:46 2008 +0200
6286
6287     make: Remove redundant __ARM__ addition when cross-compiling on *BSD
6288
6289     __ARM__ is given by arm_config.mk automatically.
6290
6291     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6292
6293 commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
6294 Author: Claudio Scordino <claudio@evidence.eu.com>
6295 Date:   Fri Sep 12 02:20:46 2008 +0200
6296
6297     Fix MACH_TYPE for the AT91RM9200DK board.
6298
6299     Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
6300
6301 commit 274737e5eb25b2bcd3af3a96da923effd543284f
6302 Author: Andrew Dyer <adyer@righthandtech.com>
6303 Date:   Fri Sep 12 02:20:46 2008 +0200
6304
6305     i.mx change get_timer(base) to return time since base
6306
6307     This patch changes get_timer() for i.MX to return the time since
6308     'base' instead of the time since the counter was at zero.
6309
6310     Symptom seen is flash timeout errors when erasing or programming a
6311     sector using the common cfi flash code.
6312
6313     Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
6314
6315 commit 48fed40575b3e8eae960eb0141509ddd9a73012a
6316 Author: Andrew Dyer <adyer@righthandtech.com>
6317 Date:   Fri Sep 12 02:20:46 2008 +0200
6318
6319     i.MX use u-boot baud rate and don't assume UART master clock
6320
6321     1) Change the i.MX serial driver to use the baud rate set in the
6322      u-boot environment
6323
6324     2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
6325
6326     3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
6327      one to clear" like other status bits in the reg.)
6328
6329     Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
6330
6331 commit 6e1551a870d360805b9d172dc56d935064abe71d
6332 Author: Andrew Dyer <adyer@righthandtech.com>
6333 Date:   Fri Sep 12 02:20:46 2008 +0200
6334
6335     arm920t fix constant error in start.S
6336
6337     Code in cpu/arm920t/start.S will die with a compilation error if
6338     CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
6339     the ARM sub instruction.  Change the code so that each is subtracted
6340     independently to avoid the error.
6341
6342     Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
6343
6344 commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
6345 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
6346 Date:   Fri Sep 12 02:20:40 2008 +0200
6347
6348     ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
6349
6350     - Correct Invalid #define of MPUTIM_PTV_MASK for
6351        omap1510 & omap730 register definition
6352
6353      MPUTIM_PTV_MASK is defined as
6354      #define MPUTIM_PTV_MASK            (0x7<<PTV_BIT)
6355
6356      while it should have been
6357      #define MPUTIM_PTV_MASK            (0x7<<MPUTIM_PTV_BIT)
6358
6359     - Below Patch corrects the same
6360
6361     Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
6362
6363 commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
6364 Author: Adrian Filipi <adrian.filipi@eurotech.com>
6365 Date:   Fri Jul 18 11:52:02 2008 -0400
6366
6367     Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
6368
6369     Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
6370
6371 commit eb16135df20535b0d19969f50fb5bd17f95e9c25
6372 Author: Guennadi Liakhovetski <lg@denx.de>
6373 Date:   Thu Aug 28 12:25:11 2008 +0200
6374
6375     i.MX31: document timer precision option
6376
6377     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6378
6379 commit 1a6337b01351b82a45b0defa76f08744511c580b
6380 Author: Magnus Lilja <lilja.magnus@gmail.com>
6381 Date:   Fri Aug 29 10:36:18 2008 +0200
6382
6383     i.MX31: Make the SPI bus and chip select configurable for MC13783
6384
6385     The i.MX31 has three SPI buses and each bus has several chip selects
6386     and the MC13783 chip can be connected to any of these. The current
6387     RTC driver for MC13783 is hardcoded for CSPI2/SS2.
6388
6389     This patch makes make MC13783 SPI bus and chip select configurable
6390     via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
6391
6392     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
6393
6394 commit 8c4ebec25b21e355b8488698ec1594da9701fff4
6395 Author: Magnus Lilja <lilja.magnus@gmail.com>
6396 Date:   Fri Aug 29 10:36:17 2008 +0200
6397
6398     i.MX31: Add reset_timer() and modify get_timer_masked().
6399
6400     This patch adds the reset_timer() function (needed by nand_base.c) and
6401     modifies the get_timer_masked() to work in the same way as the omap24xx
6402     function.
6403
6404     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
6405
6406 commit deeec4991a55de243787002ede24d2331d234fc8
6407 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6408 Date:   Wed Sep 10 22:48:09 2008 +0200
6409
6410     ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
6411
6412     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6413
6414 commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
6415 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6416 Date:   Wed Sep 10 22:48:09 2008 +0200
6417
6418     bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
6419
6420     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6421
6422 commit 0e8d158664a913392cb01fb11a948d83f72e105e
6423 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6424 Date:   Wed Sep 10 22:48:06 2008 +0200
6425
6426     rename CFG_ENV macros to CONFIG_ENV
6427
6428     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6429
6430 commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
6431 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6432 Date:   Wed Sep 10 22:48:05 2008 +0200
6433
6434     nvedit: rename error comment to CONFIG_ENV_IS_IN_
6435
6436     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6437
6438 commit b64b775e7546ed138df360ceb3a71ee358cb9a01
6439 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6440 Date:   Wed Sep 10 22:48:05 2008 +0200
6441
6442     cmd_mem: Move conditional compilation to Makefile
6443
6444     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6445
6446 commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
6447 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6448 Date:   Wed Sep 10 22:48:05 2008 +0200
6449
6450     move cmd_get_data_size to command.c
6451
6452     add CMD_DATA_SIZE macro to enable it
6453
6454     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6455
6456 commit 507641d2491980531932b9f25dab37fe5e6c3a1a
6457 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6458 Date:   Wed Sep 10 22:48:04 2008 +0200
6459
6460     env_flash: Move conditional compilation to Makefile
6461
6462     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6463
6464 commit 5a1aceb0689e2f731491838970884a673ef7e7d3
6465 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6466 Date:   Wed Sep 10 22:48:04 2008 +0200
6467
6468     rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
6469
6470     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6471
6472 commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
6473 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6474 Date:   Wed Sep 10 22:48:03 2008 +0200
6475
6476     cleanup use of CFG_ENV_IS_IN_FLASH
6477
6478     - #if CFG_ENV_IS_IN_FLASH
6479     - #if (CFG_ENV_IS_IN_FLASH == 1)
6480     - #define CFG_ENV_IS_IN_FLASH 0
6481
6482     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6483
6484 commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
6485 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6486 Date:   Wed Sep 10 22:48:01 2008 +0200
6487
6488     rename environment.c in env_embedded.c to reflect is functionality
6489
6490     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6491
6492 commit c0878af6e32f0fd8e13a6ca315b9add64441115a
6493 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6494 Date:   Wed Sep 10 22:48:01 2008 +0200
6495
6496     env_nowhere: Move conditional compilation to Makefile
6497
6498     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6499
6500 commit 93f6d72544da4510a146bc4c93d609b0116cde37
6501 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6502 Date:   Wed Sep 10 22:48:00 2008 +0200
6503
6504     rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
6505
6506     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6507
6508 commit 2556ef78113b5f089dfcac5da90bf31dd568397b
6509 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6510 Date:   Wed Sep 10 22:48:00 2008 +0200
6511
6512     env_sf: Move conditional compilation to Makefile
6513
6514     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6515
6516 commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
6517 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6518 Date:   Wed Sep 10 22:48:00 2008 +0200
6519
6520     rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
6521
6522     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6523
6524 commit 55c5f49910ec8225347aa1d211352a84de6649b4
6525 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6526 Date:   Wed Sep 10 22:48:00 2008 +0200
6527
6528     env_onenand: Move conditional compilation to Makefile
6529
6530     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6531
6532 commit 9656138ff1a34d4c4768db6b490deffc40ee674b
6533 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6534 Date:   Wed Sep 10 22:47:59 2008 +0200
6535
6536     rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
6537
6538     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6539
6540 commit 957a0e69575683efd70ace147746bbb3d8e7c501
6541 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6542 Date:   Wed Sep 10 22:47:59 2008 +0200
6543
6544     env_nvram: Move conditional compilation to Makefile
6545
6546     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6547
6548 commit 9314cee6917444ab88bd4e758da7a30975120187
6549 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6550 Date:   Wed Sep 10 22:47:59 2008 +0200
6551
6552     rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
6553
6554     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6555
6556 commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
6557 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6558 Date:   Wed Sep 10 22:47:59 2008 +0200
6559
6560     env_nand: Move conditional compilation to Makefile
6561
6562     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6563
6564 commit 51bfee192099206a4397f15f3b93516e01f58ab0
6565 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6566 Date:   Wed Sep 10 22:47:58 2008 +0200
6567
6568     rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
6569
6570     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6571
6572 commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
6573 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6574 Date:   Wed Sep 10 22:47:58 2008 +0200
6575
6576     env_dataflash: Move conditional compilation to Makefile
6577
6578     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6579
6580 commit 057c849c45b9ee19df8ff3acdeee66be52819962
6581 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6582 Date:   Wed Sep 10 22:47:58 2008 +0200
6583
6584     rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
6585
6586     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6587
6588 commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
6589 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6590 Date:   Wed Sep 10 22:47:52 2008 +0200
6591
6592     cmd_eeprom: Move conditional compilation to Makefile
6593
6594     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6595
6596 commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
6597 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6598 Date:   Fri Sep 5 09:19:54 2008 +0200
6599
6600     env_eeprom: Move conditional compilation to Makefile
6601
6602     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6603
6604 commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
6605 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6606 Date:   Fri Sep 5 09:19:30 2008 +0200
6607
6608     rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
6609
6610     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6611
6612 commit 32628c5008105a732212003d83b75f05e5243bb2
6613 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6614 Date:   Sat Aug 30 23:54:58 2008 +0200
6615
6616     cmd_mac: Move conditional compilation to Makefile
6617
6618     finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
6619     start in commit ad8f8687b78c3e917b173f038926695383c55555
6620
6621     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6622
6623 commit e5648acab153f0f429bfc714902c5aaa7879f71b
6624 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6625 Date:   Sat Aug 30 23:47:41 2008 +0200
6626
6627     cmd_fdc: Move conditional compilation to Makefile
6628
6629     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6630
6631 commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
6632 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6633 Date:   Sat Aug 30 23:47:38 2008 +0200
6634
6635     common/Makefile: add core command section
6636
6637     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6638
6639 commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
6640 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6641 Date:   Sat Aug 30 23:29:57 2008 +0200
6642
6643     cmd_vfd: Move conditional compilation to Makefile
6644
6645     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6646
6647 commit 6644641d072aee3087da129d8443187196a4d8a9
6648 Author: Scott Wood <scottwood@freescale.com>
6649 Date:   Wed Sep 10 11:48:49 2008 -0500
6650
6651     delta, zylonite: Update nand_oobinfo to nand_ecclayout.
6652
6653     This is part of the switch to newer upstream MTD code.
6654
6655     Signed-off-by: Scott Wood <scottwood@freescale.com>
6656
6657 commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
6658 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
6659 Date:   Sat Aug 30 17:06:55 2008 -0400
6660
6661     ARM DaVinci: Fix broken HW ECC for large page NAND.
6662
6663     Based on original patch by Bernard Blackham <bernard@largestprime.net>
6664
6665     U-boot's HW ECC support for large page NAND on Davinci is completely
6666     broken.  Some kernels, such as the 2.6.10 one supported by
6667     MontaVista for DaVinci, rely upon this broken behaviour as they
6668     share the same code for ECCs. In the existing scheme, error
6669     detection *might* work on large page, but error correction
6670     definitely does not.  Small page ECC correction works, but the
6671     format is not compatible with the mainline git kernel.
6672
6673     This patch adds ECC code that matches what is currently in the
6674     Davinci git repository (since NAND support was added in 2.6.24).
6675     This makes the ECC and OOB layout written by u-boot compatible with
6676     Linux for both small page and large page devices and fixes ECC
6677     correction for large page devices.
6678
6679     The old behaviour can be restored by defining the macro
6680     CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
6681
6682     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
6683     Acked-by: Sergey Kubushyn <ksi@koi8.net>
6684     Signed-off-by: Scott Wood <scottwood@freescale.com>
6685
6686 commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
6687 Author: Heiko Schocher <hs@denx.de>
6688 Date:   Wed Sep 10 11:15:28 2008 +0200
6689
6690     muas3001: update BR4 settings
6691
6692     Also set up the port pins for using I2C.
6693
6694     Signed-off-by: Heiko Schocher <hs@denx.de>
6695
6696 commit 3591293509e0c0bcf244b0f974775bff2e25697e
6697 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
6698 Date:   Wed Sep 10 09:43:49 2008 +0300
6699
6700     autoscr: Fix one-character lines and non-newline terminated scripts
6701
6702     When not using hush, the autoscr command now executes lines that are
6703     only one character long. It also runs the last line of scripts even if
6704     it does not end in a newline.
6705
6706     Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
6707
6708 commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
6709 Author: Victor Gallardo <vgallardo@amcc.com>
6710 Date:   Tue Sep 9 15:13:29 2008 -0700
6711
6712     ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
6713
6714     On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
6715     and glacier.
6716
6717     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
6718
6719 commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
6720 Author: Heiko Schocher <hs@denx.de>
6721 Date:   Mon Sep 8 10:21:11 2008 +0200
6722
6723     muas3001: added support for the LM75 sensor.
6724
6725     Signed-off-by: Heiko Schocher <hs@denx.de>
6726
6727 commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
6728 Author: Heiko Schocher <hs@denx.de>
6729 Date:   Mon Sep 8 10:20:19 2008 +0200
6730
6731     muas3001: activate WDT for the muas3001 board.
6732
6733     Signed-off-by: Heiko Schocher <hs@denx.de>
6734
6735 commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
6736 Author: Heiko Schocher <hs@denx.de>
6737 Date:   Mon Sep 8 10:19:36 2008 +0200
6738
6739     muas3001: added 64MB SDRAM autodetection.
6740
6741     Signed-off-by: Heiko Schocher <hs@denx.de>
6742
6743 commit 5251469943895de4bb9a04d5053352cc22acb7d5
6744 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
6745 Date:   Thu Aug 21 07:12:26 2008 -0700
6746
6747     Fix printf errors under -DDEBUG
6748
6749     Fix printf format-string/arg mismatches under -DDEBUG.
6750
6751     These warnings occur with DEBUG defined for a platform using
6752     cpu/mpc85xx.  Users of other architectures can unearth similar
6753     problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
6754     after "CFLAGS += $(call cc-option,-fno-stack-protector)".
6755
6756     Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
6757     Signed-off-by: Andy Fleming <afleming@freescale.com>
6758
6759 commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
6760 Author: Wolfgang Denk <wd@denx.de>
6761 Date:   Tue Sep 9 23:55:18 2008 +0200
6762
6763     Update CHANGELOG, prepare 2008-10-rc1 release
6764
6765     Signed-off-by: Wolfgang Denk <wd@denx.de>
6766
6767 commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
6768 Author: Kumar Gala <galak@kernel.crashing.org>
6769 Date:   Mon Sep 8 08:51:29 2008 -0500
6770
6771     85xx: Ensure timebase is zero on secondary cores
6772
6773     The e500um says the timebase is volatile out of reset.  To ensure
6774     TB sync works we need to make sure its zero.
6775
6776     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6777
6778 commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
6779 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6780 Date:   Tue Sep 9 22:18:24 2008 +0200
6781
6782     bootm_load_os: fix load_end debug message
6783
6784     print load_end value not pointer
6785
6786     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6787
6788 commit 1d9af0be764960e6cc1c093e97176c3542796820
6789 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6790 Date:   Tue Sep 9 22:18:23 2008 +0200
6791
6792     bootm: enable fdt support only on ppc, m68k and sparc
6793
6794     ...as done in image.c
6795
6796     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6797
6798 commit 748b5274e76f81df85cfcffaffedc323678d0623
6799 Author: Markus Heidelberg <markus.heidelberg@web.de>
6800 Date:   Tue Sep 9 18:51:05 2008 +0200
6801
6802     common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
6803
6804     Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
6805
6806 commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
6807 Author: Markus Heidelberg <markus.heidelberg@web.de>
6808 Date:   Tue Sep 9 17:31:46 2008 +0200
6809
6810     gitignore: add tags files and Vim swap file
6811
6812     Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
6813
6814 commit 1d9b67b23fca6a25154333733204339802510720
6815 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
6816 Date:   Tue Sep 9 17:52:47 2008 +0900
6817
6818     add board_eth_init() for sh7785lcr board
6819
6820     Fix the problem that cannot work RTL8169 on sh7785lcr board.
6821
6822     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
6823
6824 commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
6825 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6826 Date:   Wed Aug 6 16:08:41 2008 -0500
6827
6828     mtd: SPI Flash: Support the STMicro Flash
6829
6830     Add MTD SPI Flash support for M25P16, M25P20, M25P32,
6831     M25P40, M25P64, M25P80, M25P128.
6832
6833     Signed-off-by: Jason McMullan <mcmullan@netapp.com>
6834     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6835
6836 commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
6837 Author: Wolfgang Denk <wd@denx.de>
6838 Date:   Tue Sep 9 17:55:31 2008 +0200
6839
6840     trab: fix build problem after change to use do_div()
6841
6842     We must link with libgeneric now.
6843
6844     Signed-off-by: Wolfgang Denk <wd@denx.de>
6845
6846 commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
6847 Author: Ryan CHEN <ryan.chen@st.com>
6848 Date:   Wed Aug 20 13:00:17 2008 -0400
6849
6850     Correct drv_usb_kbd_init function
6851
6852     The patch is that check if usb_get_dev_index() function return valid
6853     pointer. If valid, continue. Otherwise return -1.
6854
6855     Signed-off-by: Ryan Chen <ryan.chen@st.com>
6856     Acked-by: Markus Klotzbuecher <mk@denx.de>
6857
6858 commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
6859 Author: Remy Bohmer <linux@bohmer.net>
6860 Date:   Wed Aug 20 11:22:02 2008 +0200
6861
6862     Make usb-stop() safe to call multiple times in a row.
6863
6864     A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
6865     enabled the usb_stop() command in common/cmd_bootm.c which was
6866     not enabled for some time, because no board did actually set the
6867     CFG_CMD_USB flag. So, now the usb_stop() is executed before
6868     loading the linux kernel.
6869
6870     However, the usb_ohci driver hangs up (at least on AT91SAM) if the
6871     driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
6872     If some other piece of code calls usb_stop() before the bootm command,
6873     this command will hangup the system during boot.
6874     (usb start and stop is typically used while booting from usb memory stick)
6875
6876     But, stopping the usb stack twice is useless anyway, and a flag already
6877     existed that kept track on the usb_init()/usb_stop() calls.
6878     So, we now check if the usb stack is really started before we stop it.
6879
6880     This problem is now fixed in both the upper as low-level layer.
6881
6882     Signed-off-by: Remy Bohmer <linux@bohmer.net>
6883     Acked-by: Markus Klotzbuecher <mk@denx.de>
6884
6885 commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
6886 Author: Wolfgang Denk <wd@denx.de>
6887 Date:   Tue Sep 9 16:55:47 2008 +0200
6888
6889     Makefile: fix bug introduced by commit 47ffd6c2
6890
6891 commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
6892 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6893 Date:   Tue Sep 9 10:00:33 2008 -0400
6894
6895     ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
6896
6897     This patch solves the problems compiling ml507, v5fx30teval and
6898     ppc440-generic out of tree.
6899
6900     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6901
6902 commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
6903 Author: Nícolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
6904 Date:   Thu Sep 4 15:35:46 2008 -0300
6905
6906     Fix dev_print when called from usb_stor_info (usb storage command)
6907
6908     Fix output of the usb storage command. It was printing "Device 0: not
6909     available" because IF_TYPE_USB was not included into the switch
6910     statement.
6911
6912     Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
6913
6914 commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
6915 Author: Bartlomiej Sieka <tur@semihalf.com>
6916 Date:   Tue Sep 9 12:58:16 2008 +0200
6917
6918     FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
6919
6920     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
6921
6922 commit 919f550dc11a13abf01c6bc713c968de790b8d7c
6923 Author: Bartlomiej Sieka <tur@semihalf.com>
6924 Date:   Tue Sep 9 12:58:15 2008 +0200
6925
6926     FIT: add ability to check hashes of all images in FIT, improve output
6927
6928     - add function fit_all_image_check_hashes() that verifies if all
6929       hashes of all images in the FIT are valid
6930     - improve output of fit_image_check_hashes() when the hash check fails
6931
6932     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
6933
6934 commit 1de1fa408967cef6804bb046b904114519bb36f0
6935 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6936 Date:   Mon Sep 8 20:54:39 2008 +0200
6937
6938     qemu_mips: Update linux bootm to support dynamic cmdline
6939
6940     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6941
6942 commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
6943 Author: Peter Tyser <ptyser@xes-inc.com>
6944 Date:   Mon Sep 8 14:56:49 2008 -0500
6945
6946     Add support for booting of INTEGRITY operating system uImages
6947
6948     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6949
6950 commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
6951 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6952 Date:   Mon Sep 8 21:01:29 2008 +0200
6953
6954     mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
6955
6956     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6957
6958 commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
6959 Author: Kumar Gala <galak@kernel.crashing.org>
6960 Date:   Mon Sep 8 13:57:12 2008 -0500
6961
6962     Remove support for booting ARTOS images
6963
6964     Pantelis Antoniou stated:
6965         AFAIK, it is still used but the products using PPC are long gone.
6966         Nuke it plz (from orbit).
6967
6968     So remove it since it cleans up a usage of env_get_char outside of
6969     the environment code.
6970
6971     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6972
6973 commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
6974 Author: Wolfgang Denk <wd@denx.de>
6975 Date:   Tue Sep 9 15:45:18 2008 +0200
6976
6977     Makefile: compile and link each module just once
6978
6979     Several source files need to be compiled and linked when one or more
6980     config options are selected. To allow for easy selection in the
6981     Makefiles yet to avoild multiple compilation (which costs build time)
6982     and especially multiple linking (which causes errors), we use
6983     "COBJS = $(sort COBJS-y)" which eliminates duplicates.
6984
6985     By courtesy of Detlev Zundel who suggested this approach.
6986
6987     Signed-off-by: Wolfgang Denk <wd@denx.de>
6988
6989 commit 48d0192fe869948fef14b460b5f0c85bca933693
6990 Author: Andreas Engel <andreas.engel@ericsson.com>
6991 Date:   Mon Sep 8 14:30:53 2008 +0200
6992
6993     Moved conditional compile into Makefile
6994
6995     Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
6996
6997 commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
6998 Author: Andreas Engel <andreas.engel@ericsson.com>
6999 Date:   Mon Sep 8 10:17:31 2008 +0200
7000
7001     Merged serial_pl010.c and serial_pl011.c.
7002
7003     They only differ in the init function.
7004     This also adds the missing watchdog support for the PL011.
7005
7006     Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
7007
7008 commit 0817d688f307ee2c0598e79175c94a40ce90337b
7009 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7010 Date:   Sun Sep 7 17:10:27 2008 -0400
7011
7012     Remove gap fill in srec object v2
7013
7014     SREC files do not need gap fill: The load address is specified in the
7015     file. On the other hand, it can't be avoided in a .bin object. It has
7016     no information about memory location.
7017
7018     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7019
7020 commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
7021 Author: Markus Heidelberg <markus.heidelberg@web.de>
7022 Date:   Sun Sep 7 20:18:27 2008 +0200
7023
7024     README: fix missing subdirectory in the documentation
7025
7026     Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
7027
7028 commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
7029 Author: Graeme Russ <graeme.russ@gmail.com>
7030 Date:   Sun Sep 7 07:08:42 2008 +1000
7031
7032     Update i386 code (sc520_cdp)
7033
7034     Attempt to bring i386 / sc520 inline with master
7035
7036     Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
7037
7038 commit 5608692104efa8d56df803dc79ea41ac3607eee5
7039 Author: Guennadi Liakhovetski <lg@denx.de>
7040 Date:   Thu Sep 4 13:01:49 2008 +0200
7041
7042     fw_env: add NAND support
7043
7044     Add support for environment in NAND with automatic NOR / NAND recognition,
7045     including unaligned environment, bad-block skipping, redundant environment
7046     copy.
7047
7048     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7049
7050 commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
7051 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7052 Date:   Tue Sep 9 09:50:24 2008 +0200
7053
7054     ppc4xx: Fix out-of-tree building of CPCI405 variants
7055
7056     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7057     Acked-by: Stefan Roese <sr@denx.de>
7058
7059 commit 59f630588e3fdbd698a0a2798e52a8924e899563
7060 Author: Sergei Poselenov <sposelenov@emcraft.com>
7061 Date:   Fri Aug 15 15:42:11 2008 +0200
7062
7063     Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
7064
7065     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7066
7067 commit e64987a892353f3d49eb242d997820ef8f538912
7068 Author: Anatolij Gustschin <agust@denx.de>
7069 Date:   Fri Aug 15 15:42:13 2008 +0200
7070
7071     85xx: socrates: Enable Lime support.
7072
7073     This patch adds Lime GDC support together with support for the PWM
7074     backlight control through the w83782d chip.  The reset pin of the
7075     latter is attached to GPIO, so we need to reset it in
7076     early_board_init_r.
7077
7078     Signed-off-by: Anatolij Gustschin <agust@denx.de>
7079
7080 commit 3e79b588b5199f35016f178fc0d5d1266382097f
7081 Author: Detlev Zundel <dzu@denx.de>
7082 Date:   Fri Aug 15 15:42:12 2008 +0200
7083
7084     85xx: Socrates: Major code update.
7085
7086     - Update the local bus ranges in the FDT for Linux for the various
7087       devices connected to the local bus via chip-select.
7088
7089     - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
7090       lower than 66 MHz and uses I/O accessor functions consequently.
7091
7092     - UPM data update.
7093
7094     - Update of default environment and configuration.  Use I2C multibus
7095       as we do have two I2C buses.  Also enable sdram and ext2 commands.
7096
7097     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
7098     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7099     Signed-off-by: Detlev Zundel <dzu@denx.de>
7100
7101 commit e8d18541c6ceab821f75faab031740b33fdbfa4b
7102 Author: Timur Tabi <timur@freescale.com>
7103 Date:   Fri Jul 18 16:52:23 2008 +0200
7104
7105     Update Freescale 85xx boards to sys_eeprom.c
7106
7107     The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
7108     format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
7109     86xx boards already use sys_eeprom.c, so this patch migrates the remaining
7110     Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.
7111
7112     Signed-off-by: Timur Tabi <timur@freescale.com>
7113
7114 commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
7115 Author: Wolfgang Denk <wd@denx.de>
7116 Date:   Tue Sep 9 10:08:02 2008 +0200
7117
7118     lib_ppc/interrupts.c: make board_show_activity() a weak function
7119
7120     This allows to use show_activity() without having to
7121     define an empty board_show_activity() function.
7122
7123     Signed-off-by: Wolfgang Denk <wd@denx.de>
7124
7125 commit fe876787f8743883ce58fed61525eaa2f34da4c5
7126 Author: Wolfgang Denk <wd@denx.de>
7127 Date:   Tue Sep 9 10:06:44 2008 +0200
7128
7129     stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
7130
7131     Signed-off-by: Wolfgang Denk <wd@denx.de>
7132
7133 commit 965de106ba8900372c8b16dc60d5acab7f925e38
7134 Author: Wolfgang Denk <wd@denx.de>
7135 Date:   Tue Sep 9 10:03:47 2008 +0200
7136
7137     NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
7138
7139     Signed-off-by: Wolfgang Denk <wd@denx.de>
7140
7141 commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
7142 Author: Sergei Poselenov <sposelenov@emcraft.com>
7143 Date:   Fri Aug 15 15:42:11 2008 +0200
7144
7145     Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
7146
7147     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7148
7149 commit 36241ca29d4804a1006fb3f26069effda5202581
7150 Author: Anatolij Gustschin <agust@denx.de>
7151 Date:   Fri Aug 15 15:42:13 2008 +0200
7152
7153     85xx: socrates: Enable Lime support.
7154
7155     This patch adds Lime GDC support together with support for the PWM
7156     backlight control through the w83782d chip.  The reset pin of the
7157     latter is attached to GPIO, so we need to reset it in
7158     early_board_init_r.
7159
7160     Signed-off-by: Anatolij Gustschin <agust@denx.de>
7161
7162 commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
7163 Author: Detlev Zundel <dzu@denx.de>
7164 Date:   Fri Aug 15 15:42:12 2008 +0200
7165
7166     85xx: Socrates: Major code update.
7167
7168     - Update the local bus ranges in the FDT for Linux for the various
7169       devices connected to the local bus via chip-select.
7170
7171     - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
7172       lower than 66 MHz and uses I/O accessor functions consequently.
7173
7174     - UPM data update.
7175
7176     - Update of default environment and configuration.  Use I2C multibus
7177       as we do have two I2C buses.  Also enable sdram and ext2 commands.
7178
7179     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
7180     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7181     Signed-off-by: Detlev Zundel <dzu@denx.de>
7182
7183 commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
7184 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7185 Date:   Tue Sep 9 01:22:39 2008 +0200
7186
7187     disk-on-chip: remove duplicate doc_probe declaration
7188
7189     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7190
7191 commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
7192 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7193 Date:   Tue Sep 9 00:59:40 2008 +0200
7194
7195     onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
7196
7197     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7198
7199 commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
7200 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7201 Date:   Tue Sep 9 00:59:39 2008 +0200
7202
7203     rs5c372: fix rtc_set prototype
7204
7205     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7206
7207 commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
7208 Author: Sergei Poselenov <sposelenov@emcraft.com>
7209 Date:   Thu Aug 14 14:08:28 2008 +0200
7210
7211     ARM: fix warning: target CPU does not support interworking
7212
7213     This patch fixes warnings like this:
7214
7215     start.S:0: warning: target CPU does not support interworking
7216
7217     which come from some ARM cross compilers and are caused by hard-coded
7218     (with "--with-cpu=arm9" configuration option) ARM targets (which
7219     support ARM Thumb instructions), while the ARM target selected from
7220     the command line (with "-march=armv4") doesn't support Thumb
7221     instructions.
7222
7223     This warning is issued by the compiler regardless of the real use of
7224     the Thumb instructions in code.
7225
7226     To fix this problem, we use options according to compiler version
7227     being used.
7228
7229     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7230     Signed-off-by: Wolfgang Denk <wd@denx.de>
7231
7232 commit 4265c35fbcb248e58179007621d61d32d0b3b82a
7233 Author: Sergei Poselenov <sposelenov@emcraft.com>
7234 Date:   Thu Aug 14 14:08:28 2008 +0200
7235
7236     ARM: Use do_div() instead of division for "long long".
7237
7238     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
7239     Signed-off-by: Wolfgang Denk <wd@denx.de>
7240
7241 commit 8febd13c69cb68652577d1a9fcbde954bf784155
7242 Author: Timur Tabi <timur@freescale.com>
7243 Date:   Fri Jul 18 16:52:23 2008 +0200
7244
7245     Update Freescale 85xx boards to sys_eeprom.c
7246
7247     The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
7248     format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
7249     86xx boards already use sys_eeprom.c, so this patch migrates the remaining
7250     Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.
7251
7252     Signed-off-by: Timur Tabi <timur@freescale.com>
7253
7254 commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
7255 Author: Wolfgang Denk <wd@denx.de>
7256 Date:   Mon Sep 8 23:26:22 2008 +0200
7257
7258     lib_arm/bootm.c: fix compile warnings
7259
7260     bootm.c:128: warning: label 'error' defined but not used
7261     bootm.c:65: warning: unused variable 'ret'
7262
7263     Signed-off-by: Wolfgang Denk <wd@denx.de>
7264
7265 commit 2e3c867d0a63c563a51e65b776973b008f16cec5
7266 Author: Wolfgang Denk <wd@denx.de>
7267 Date:   Mon Sep 8 22:46:42 2008 +0200
7268
7269     ml507: fix out of tree build problem
7270
7271     Signed-off-by: Wolfgang Denk <wd@denx.de>
7272
7273 commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
7274 Author: Wolfgang Denk <wd@denx.de>
7275 Date:   Mon Sep 8 22:10:28 2008 +0200
7276
7277     common/cmd_bootm.c: fix printf() format warnings
7278
7279     Signed-off-by: Wolfgang Denk <wd@denx.de>
7280
7281 commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
7282 Author: Wolfgang Denk <wd@denx.de>
7283 Date:   Mon Sep 8 22:37:45 2008 +0200
7284
7285     BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
7286
7287     missing doc_probe() prototype.
7288
7289     Signed-off-by: Wolfgang Denk <wd@denx.de>
7290
7291 commit 2c5e3cc4994897d364b148942ff23e47783198f6
7292 Author: Wolfgang Denk <wd@denx.de>
7293 Date:   Mon Sep 8 21:28:14 2008 +0200
7294
7295     mk48t59: fix compile problem introduced by commit d1e23194
7296
7297     Signed-off-by: Wolfgang Denk <wd@denx.de>
7298
7299 commit 5ff889349d2ace13f10c9335e09365fcec8247cc
7300 Author: Stefan Roese <sr@denx.de>
7301 Date:   Mon Sep 8 14:11:12 2008 +0200
7302
7303     ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
7304
7305     This patch moves some 4xx specific prototypes out of include common.h
7306     to a ppc4xx specific header.
7307
7308     Signed-off-by: Stefan Roese <sr@denx.de>
7309
7310 commit ac53ee8318678190bf3c68da477a84a657d86fb0
7311 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7312 Date:   Fri Sep 5 15:34:04 2008 +0200
7313
7314     ppc4xx: Update CPCI405(AB) configuration
7315
7316     This patch add FDT support and command line editing capabilities
7317     for CPCI405 and CPCI405AB boards.
7318
7319     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7320     Signed-off-by: Stefan Roese <sr@denx.de>
7321
7322 commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
7323 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7324 Date:   Fri Sep 5 15:34:03 2008 +0200
7325
7326     ppc4xx: Cleanup CPCI405 linker script
7327
7328     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7329     Signed-off-by: Stefan Roese <sr@denx.de>
7330
7331 commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
7332 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7333 Date:   Fri Sep 5 15:34:02 2008 +0200
7334
7335     ppc4xx: Update CPCI405 variants handling
7336
7337     This patch replaces the BOARD_REVISION variable in include/config.mk
7338     by a using a temporary include file in the platform directory.
7339
7340     The former way does not work anymore and the latter is also used by
7341     some other boards.
7342
7343     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7344     Signed-off-by: Stefan Roese <sr@denx.de>
7345
7346 commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
7347 Author: Stefan Roese <sr@denx.de>
7348 Date:   Mon Sep 8 10:01:48 2008 +0200
7349
7350     ppc4xx: Remove CONFIG_CS8952_PHY define
7351
7352     Since this define is only used on one board that was never really in
7353     production, removing this compile time option doesn't hurt and makes
7354     the code more readable.
7355
7356     Signed-off-by: Stefan Roese <sr@denx.de>
7357
7358 commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
7359 Author: Stefan Roese <sr@denx.de>
7360 Date:   Fri Sep 5 14:11:40 2008 +0200
7361
7362     ppc4xx: Fix compilation warning for PIP405
7363
7364     This patch fixes a compilation warning for the PIP405 board. It moves the
7365     #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
7366     occur anymore. I am a little unsure if this #ifdef is at the correct
7367     place now or if it could be removed completely. This needs to get
7368     tested on the PIP405 board.
7369
7370     Signed-off-by: Stefan Roese <sr@denx.de>
7371
7372 commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
7373 Author: Stefan Roese <sr@denx.de>
7374 Date:   Fri Sep 5 14:09:09 2008 +0200
7375
7376     ppc4xx: Fix compilation warning for canyonlands & glacier
7377
7378     Signed-off-by: Stefan Roese <sr@denx.de>
7379
7380 commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
7381 Author: Kumar Gala <galak@kernel.crashing.org>
7382 Date:   Fri Sep 5 14:40:29 2008 -0500
7383
7384     Fix compiler warning in mpc8xxx ddr code
7385
7386     ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
7387     ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
7388     ctrl_regs.c:523: note: 'caslat' was declared here
7389
7390     Add a warning in DDR1 case if cas_latency isn't a value we know about.
7391
7392     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7393     Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7394
7395 commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
7396 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7397 Date:   Mon Sep 1 23:06:23 2008 +0200
7398
7399     rtc: allow rtc_set to return an error and use it in cmd_date
7400
7401     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7402
7403 commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
7404 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7405 Date:   Mon Sep 1 01:16:33 2008 +0200
7406
7407     ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
7408
7409     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7410
7411 commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
7412 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7413 Date:   Sun Aug 31 05:37:04 2008 +0900
7414
7415     config.mk: Move arch-specific condition to $(ARCH)_config.mk
7416
7417     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7418
7419 commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
7420 Author: Kumar Gala <galak@kernel.crashing.org>
7421 Date:   Fri Aug 29 19:08:29 2008 -0500
7422
7423     Prevent crash if random/invalid ramdisks are passed to bootm
7424
7425     Adds returning an error from the ramdisk detection code if
7426     its not a real ramdisk (invalid).  There is no reason we can't
7427     just return back to the console if we detect an invalid
7428     ramdisk or CRC error.
7429
7430     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7431
7432 commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
7433 Author: Anatolij Gustschin <agust@denx.de>
7434 Date:   Fri Aug 29 21:04:45 2008 +0200
7435
7436     Prevent crash if random DTB address is passed to bootm
7437
7438     This patch adds bootm_start() return value check. If
7439     error status is returned, we do not proceed further to
7440     prevent board reset or crash as we still can recover
7441     at this point.
7442
7443     Signed-off-by: Anatolij Gustschin <agust@denx.de>
7444
7445 commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
7446 Author: Andrew Dyer <adyer@righthandtech.com>
7447 Date:   Fri Aug 29 12:30:39 2008 -0500
7448
7449     clean up some #if !defined() in drivers/video/cfb_console.c
7450
7451     rearrange some #if !defined() / #else / #endif statements to remove
7452     the negative logic.
7453
7454     Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
7455
7456 commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
7457 Author: Kyungmin Park <kmpark@infradead.org>
7458 Date:   Fri Aug 29 09:02:20 2008 +0900
7459
7460     apollon: use the last memory area for u-boot
7461
7462     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
7463
7464 commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
7465 Author: Heiko Schocher <hs@denx.de>
7466 Date:   Thu Aug 28 13:50:42 2008 +0200
7467
7468     TQM8272: move NAND part in seperate File
7469
7470     I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
7471     because I have no longer access to the hardware.
7472
7473     Signed-off-by: Heiko Schocher <hs@denx.de>
7474
7475 commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
7476 Author: Heiko Schocher <hs@denx.de>
7477 Date:   Thu Aug 28 13:48:36 2008 +0200
7478
7479     TQM8272: Fix compiling error for the TQM8272 board.
7480
7481     Fix compile problems caused by
7482     commit  cfa460adfdefcc30d104e1a9ee44994ee349bb7b
7483
7484     Signed-off-by: Heiko Schocher <hs@denx.de>
7485
7486 commit 1a7f8ccec981648ccd38fca2535490582eee08e6
7487 Author: Kyungmin Park <kmpark@infradead.org>
7488 Date:   Wed Aug 27 14:45:20 2008 +0900
7489
7490     Add JFFS2 command support on OneNAND
7491
7492     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
7493
7494 commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
7495 Author: Mark Jackson <mpfj@mimc.co.uk>
7496 Date:   Mon Aug 25 19:21:30 2008 +0100
7497
7498     Allow console input to be disabled
7499
7500     Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
7501
7502     When CONFIG_DISABLE_CONSOLE is defined, setting
7503     GD_FLG_DISABLE_CONSOLE disables all console input and output.
7504
7505     Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
7506
7507 commit 2b22d608f370565c87f55928b524207031419c11
7508 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7509 Date:   Wed Jul 30 12:39:29 2008 +0200
7510
7511     loads: allow negative offsets
7512
7513     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7514
7515 commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
7516 Author: Yuri Tikhonov <yur@emcraft.com>
7517 Date:   Thu Sep 4 11:19:05 2008 +0200
7518
7519     USB EHCI: reset root hub
7520
7521     Some of multi-function USB controllers (e.g. ISP1562) allow root hub
7522     resetting only via EHCI registers. So, this patch adds the
7523     corresponding kind of reset to OHCI's hc_reset() if the newly
7524     introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
7525     board).
7526
7527     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
7528     Acked-by: Markus Klotzbuecher <mk@denx.de>
7529
7530 commit 5875d358f025c1b042d8a0f08384b756de7256c9
7531 Author: Yuri Tikhonov <yur@emcraft.com>
7532 Date:   Fri Aug 15 15:42:09 2008 +0200
7533
7534     RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
7535
7536     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
7537
7538 commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
7539 Author: Stefan Roese <sr@denx.de>
7540 Date:   Fri Sep 5 10:47:46 2008 +0200
7541
7542     devices: Use list_add_tail() instead of list_add() to register a device
7543
7544     This patch fixes a problem spotted on Glacier/Canyonlands (and most
7545     likely lots of other board ports), that no serial output was seen
7546     after console initialization in console_init_r(). This is because the
7547     last added console device was used instead of the first added.
7548
7549     This patch fixes this problem by using list_add_tail() instead of
7550     list_add() to register a device. This way the first added console
7551     is used again.
7552
7553     Signed-off-by: Stefan Roese <sr@denx.de>
7554
7555 commit 78d78236896d62bb8ca7302af38d8f1493eb2651
7556 Author: Victor Gallardo <vgallardo@amcc.com>
7557 Date:   Thu Sep 4 23:49:36 2008 -0700
7558
7559     ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
7560
7561     This patch adds GPCS, SGMII and M88E1112 PHY support
7562     for the AMCC PPC460GT/EX processors.
7563
7564     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
7565     Signed-off-by: Stefan Roese <sr@denx.de>
7566
7567 commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
7568 Author: Adam Graham <agraham@amcc.com>
7569 Date:   Wed Sep 3 12:26:59 2008 -0700
7570
7571     ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
7572
7573     Signed-off-by: Adam Graham <agraham@amcc.com>
7574     Signed-off-by: Stefan Roese <sr@denx.de>
7575
7576 commit 075d0b81e896e8735ae26372cd384f87cbd24e41
7577 Author: Adam Graham <agraham@amcc.com>
7578 Date:   Wed Sep 3 12:26:28 2008 -0700
7579
7580     ppc4xx: IBM Memory Controller DDR autocalibration routines
7581
7582     Alternate SDRAM DDR autocalibration routine that can be generically used
7583     for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
7584     support of more DIMM/memory chip vendors and gets the DDR autocalibration
7585     values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
7586
7587     Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
7588     "Method_A" and "Method_B".  DDR autocalibration Method_A scans the full range
7589     of possible PPC4xx  SDRAM Controller DDR autocalibration values and takes a
7590     lot longer to run than Method_B.  Method_B executes in the same amount of time
7591     as the currently existing DDR autocalibration routine, i.e. 1 second or so.
7592     Normally Method_B is used and it is set as the default method.
7593
7594     The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
7595     Controller registers.[bit-field]:
7596     1)  SDRAM0_RQDC.[RQFD]
7597     2)  SDRAM0_RFDC.[RFFD]
7598
7599     This alternate PPC4xx DDR autocalibration code calibrates the following
7600     IBM SDRAM Controller registers.[bit-field]:
7601
7602     1)  SDRAM0_WRDTR.[WDTR]
7603     2)  SDRAM0_CLKTR.[CKTR]
7604     3)  SDRAM0_RQDC.[RQFD]
7605     4)  SDRAM0_RFDC.[RFFD]
7606
7607     and will also use the calibrated settings of the above four registers that
7608     produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
7609     register.[bit-field].
7610
7611     Signed-off-by: Adam Graham <agraham@amcc.com>
7612     Signed-off-by: Stefan Roese <sr@denx.de>
7613
7614 commit e07f4a8033b6270b8103049adb6456f660ff4a89
7615 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7616 Date:   Mon Sep 1 13:09:39 2008 -0400
7617
7618     ppc44x: Unification of virtex5 pp440 boards
7619
7620     This patch provides an unificated way of handling xilinx v5 ppc440 boards.
7621
7622     It unificates 3 different things:
7623
7624     1) Source code
7625     A new board called ppc440-generic has been created. This board includes
7626     a generic tlb initialization (Maps the whole memory into virtual) and
7627     defines board_pre_init, checkboard, initdram and get_sys_info weakly,
7628     so, they can be replaced by specific functions.
7629
7630     If a new board needs to redefine any of the previous functions
7631     (specific initialization) it can create a new directory with the
7632     specific initializations needed. (see the example ml507 board).
7633
7634     2) Configuration file
7635     Common configurations are located under configs/xilinx-ppc440.h, this
7636     header file interpretes the xparameters file generated by EDK and
7637     configurates u-boot in correspondence. Example: if there is a Temac,
7638     allows CMD_CONFIG_NET
7639     Specific configuration are located under specific configuration file.
7640     (see the example ml507 board)
7641
7642     3) Makefile
7643     Some work has been done in order to not duplicate work in the Main
7644     Makefile. Please see the attached code.
7645
7646     In order to support new boards they can be implemented in the next way:
7647
7648     a) Simple Generic Board  (90% of the time)
7649     Using EDK generates a new xparameters.h file, replace
7650     ppc440-generic/xparameters.h  and run make xilinx-ppc440-generic_config
7651     && make
7652
7653     b) Simple Boards with special u-boot parameters (9 % of the time)
7654     Create a new file under configs for it (use ml507.h as example) and
7655     change your paramaters. Create a new Makefile paragraph and compile
7656
7657     c) Complex boards (1% of the time)
7658     Create a new folder for the board, like the ml507
7659
7660     Finally, it adds support for the Avnet FX30T Evaluation board, following
7661     the new generic structure:
7662
7663     Cheap board by Avnet for evaluating the Virtex5 FX technology.
7664
7665     This patch adds support for:
7666      - UartLite
7667      - 16MB Flash
7668      - 64MB RAM
7669
7670     Prior using U-boot in this board, read carefully the ERRATA by Avnet
7671     to solve some memory initialization issues.
7672
7673     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7674     Signed-off-by: Stefan Roese <sr@denx.de>
7675
7676 commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
7677 Author: Nick Spence <nick.spence@freescale.com>
7678 Date:   Tue Sep 2 15:21:16 2008 -0500
7679
7680     mpc83xx: fix mpc8313 in-tree building with NAND
7681
7682     and add mpc8313 NAND build to MAKEALL
7683
7684     Signed-off-by: Nick Spence <nick.spence@freescale.com>
7685     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7686
7687 commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
7688 Author: Nick Spence <nick.spence@freescale.com>
7689 Date:   Thu Aug 28 14:09:25 2008 -0700
7690
7691     mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
7692
7693     Cleans up some latent issues with the data cache control so that
7694     dcache_enable() and dcache_disable() will work reliably (after
7695     unlock_ram_in_cache() has been called)
7696
7697     Signed-off-by: Nick Spence <nick.spence@freescale.com>
7698     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7699
7700 commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
7701 Author: Nick Spence <nick.spence@freescale.com>
7702 Date:   Thu Aug 28 14:09:19 2008 -0700
7703
7704     mpc83xx: Store and display Arbiter Event Register values
7705
7706     Record the Arbiter Event Register values and optionally display them.
7707
7708     The Arbiter Event Register can record the type and effective address of
7709     an arbiter error, even through an HRESET. This patch stores the values in
7710     the global data structure.
7711
7712     Display of the Arbiter Event registers immediately after the RSR value
7713     can be enabled with defines. The Arbiter values will only be displayed
7714     if an arbiter event has occured since the last Power On Reset, and either
7715     of the following defines exist:
7716      #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
7717                                         and type register values
7718      #define CONFIG_DISPLAY_AER_FULL  - display and interpret the arbiter
7719                                         event register values
7720
7721     Address Only transactions are one of the trapped events that can register
7722     as an arbiter event. They occur with some cache manipulation instructions
7723     if the HID0_ABE (Address Broadcast Enable) is set and the memory region
7724     has the MEMORY_COHERENCE WIMG bit set. Setting:
7725      #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
7726                                   only events, so that it can still capture
7727                                   other real problems.
7728
7729     Signed-off-by: Nick Spence <nick.spence@freescale.com>
7730     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7731
7732 commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
7733 Author: Nick Spence <nick.spence@freescale.com>
7734 Date:   Thu Aug 28 14:09:11 2008 -0700
7735
7736     mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
7737
7738     This is needed in unlock_ram_in_cache() because it is called from C and
7739     will corrupt the small data area anchor that is kept in R2.
7740
7741     lock_ram_in_cache() is modified similarly as good coding practice, but
7742     is not called from C.
7743
7744     Signed-off-by: Nick Spence <nick.spence@freescale.com>
7745     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7746
7747 commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
7748 Author: Nick Spence <nick.spence@freescale.com>
7749 Date:   Fri Aug 22 23:52:50 2008 -0700
7750
7751     MPC83XX: Fix GPIO configuration - set gpio level before direction
7752
7753     Set DAT value before DIR values to avoid creating glitches on the
7754     GPIO signals.
7755
7756     Set gpio level register before direction register to inhibit
7757     glitches on high level output pins.
7758
7759     Dir and data gets cleared at powerup, so high level output lines see
7760     a short low pulse between setting the direction and level registers.
7761
7762     Issue was seen on a new board with the nReset line of the NOR flash
7763     connected to a GPIO. Setting the direction register puts the NOR flash
7764     in reset so the next instruction to set the level cannot get executed.
7765
7766     Signed-off-by: Nick Spence <nick.spence@freescale.com>
7767     Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
7768     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7769
7770 commit 7007c5975ee900ad70983b0681d3251e221f8321
7771 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7772 Date:   Tue Sep 2 02:58:32 2008 +0200
7773
7774     doc/qemu_mips: add doc howto debug u-boot with gdb
7775
7776     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7777
7778 commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
7779 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7780 Date:   Wed Sep 3 17:15:45 2008 +0200
7781
7782     ppx4xx: Fix broken DASA_SIM board
7783
7784     This patch adds initdram() to DASA_SIM boards that has been
7785     removed accidentally by a previous commit.
7786
7787     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7788     Signed-off-by: Stefan Roese <sr@denx.de>
7789
7790 commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
7791 Author: Stefan Roese <sr@denx.de>
7792 Date:   Mon Sep 1 08:35:37 2008 +0200
7793
7794     ppc4xx: Remove reference to common/lists.o from some esd linker scripts
7795
7796     This patch removes some direct references to common/lists.o from some
7797     esd linker scripts. This is necessary because the lists source was moved
7798     and is not in the "common" directory anymore.
7799
7800     Signed-off-by: Stefan Roese <sr@denx.de>
7801
7802 commit 97b0734d65f8a0b03df0a335a2addc759da56107
7803 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7804 Date:   Tue Sep 2 16:33:05 2008 +0200
7805
7806     ppc4xx: Remove obsolete or unused functions from some esd boards
7807
7808     This patch removes initdram() and testdram() from most esd 405 platforms.
7809     Some boards also have an empty dummy implementation of
7810     misc_init_f(). This is also removed.
7811
7812     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7813     Signed-off-by: Stefan Roese <sr@denx.de>
7814
7815 commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
7816 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7817 Date:   Tue Sep 2 15:07:54 2008 +0200
7818
7819     ppc4xx: Update VOM405 board configuration
7820
7821     - remove PCI code
7822     - add command line editing
7823     - minor cleanup
7824
7825     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7826     Signed-off-by: Stefan Roese <sr@denx.de>
7827
7828 commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
7829 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7830 Date:   Tue Sep 2 15:07:53 2008 +0200
7831
7832     ppc4xx: Remove obsolete initdram() function from VOM405 board
7833
7834     This patch removed the obsolete initdram() function from
7835     VOM405 platform file.
7836
7837     Some minor cleanup.
7838
7839     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7840     Signed-off-by: Stefan Roese <sr@denx.de>
7841
7842 commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
7843 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7844 Date:   Tue Sep 2 15:07:52 2008 +0200
7845
7846     ppc4xx: Cleanup VOM405 linker script
7847
7848     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7849     Signed-off-by: Stefan Roese <sr@denx.de>
7850
7851 commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
7852 Author: Matthias Fuchs <mf@esd.eu>
7853 Date:   Tue Sep 2 15:07:51 2008 +0200
7854
7855     ppc4xx: Add fdt support for VOM405 boards
7856
7857     Signed-off-by: Matthias Fuchs <mf@esd.eu>
7858     Signed-off-by: Stefan Roese <sr@denx.de>
7859
7860 commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
7861 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7862 Date:   Tue Sep 2 11:36:14 2008 +0200
7863
7864     ppc4xx: Coding style cleanup
7865
7866     Wrap long lines etc.
7867
7868     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7869     Signed-off-by: Stefan Roese <sr@denx.de>
7870
7871 commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
7872 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7873 Date:   Tue Sep 2 11:35:56 2008 +0200
7874
7875     ppc4xx: Enable USB on PLU405 boards
7876
7877     This patch enables the PCI-OHCI controller on PLU405 board.
7878
7879     Also the default CPU frequency is updated to 266 MHz and
7880     command line editing is enabled.
7881
7882     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7883     Signed-off-by: Stefan Roese <sr@denx.de>
7884
7885 commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
7886 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7887 Date:   Tue Sep 2 11:35:35 2008 +0200
7888
7889     ppc4xx: Cleanup PLU405 platform file
7890
7891     This patch
7892     - wraps some long lines
7893     - removes unused/obsolete functions: misc_init_f() and initdram()
7894
7895     Signed-off-by: Matthias Fuchs <mf@esd.eu>
7896     Signed-off-by: Stefan Roese <sr@denx.de>
7897
7898 commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
7899 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7900 Date:   Tue Sep 2 11:35:04 2008 +0200
7901
7902     ppc4xx: Cleanup PLU405 linker script
7903
7904     Signed-off-by: Matthias Fuchs <mf@esd.eu>
7905     Signed-off-by: Stefan Roese <sr@denx.de>
7906
7907 commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
7908 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7909 Date:   Tue Sep 2 11:34:36 2008 +0200
7910
7911     ppc4xx: Add fdt support for PLU405 boards
7912
7913     Signed-off-by: Matthias Fuchs <mf@esd.eu>
7914     Signed-off-by: Stefan Roese <sr@denx.de>
7915
7916 commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
7917 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
7918 Date:   Tue Sep 2 11:34:08 2008 +0200
7919
7920     ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
7921
7922     Signed-off-by: Matthias Fuchs <mf@esd.eu>
7923     Signed-off-by: Stefan Roese <sr@denx.de>
7924
7925 commit be1b0d2777e179191a57b138b660547a17e55aad
7926 Author: Jochen Friedrich <jochen@scram.de>
7927 Date:   Tue Sep 2 11:24:59 2008 +0200
7928
7929     Don't tftp to unknown flash
7930
7931     If a board has a variable number of flash banks, there are empty entries
7932     in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
7933     "Outside available Flash". This patch skips flash banks with unknown
7934     flash ids.
7935
7936     Signed-off-by: Jochen Friedrich <jochen@scram.de>
7937     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7938
7939 commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
7940 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
7941 Date:   Thu Aug 28 13:40:44 2008 +0900
7942
7943     net: smc911x: Add pkt_data_pull and pkt_data_push function
7944
7945     The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
7946     Byte-swapping is necessary, and so poor performance is inevitable.
7947     This problem cannot evade by the swap function of CHIP, this can
7948     evade by software Byte-swapping.
7949     And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
7950     functions necessary to solve this problem.
7951
7952     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
7953     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7954
7955 commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
7956 Author: Ben Warren <biggerbadderben@gmail.com>
7957 Date:   Sun Aug 31 20:37:00 2008 -0700
7958
7959     Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
7960
7961     Affected boards:
7962         db64360
7963         db64460
7964         katmai
7965         taihu
7966         taishan
7967         yucca
7968         cpc45
7969         cpu87
7970         eXalion
7971         elppc
7972         debris
7973         kvme080
7974         mpc8315erdb
7975         integratorap
7976         ixdp425
7977         oxc
7978         pm826
7979         pm828
7980         pm854
7981         pm856
7982         ppmc7xx
7983         sc3
7984         sc520_spunk
7985         sorcery
7986         tqm8272
7987         tqm85xx
7988         utx8245
7989
7990     Removed initialization of the driver from net/eth.c
7991     Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
7992
7993     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7994
7995 commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
7996 Author: Ben Warren <biggerbadderben@gmail.com>
7997 Date:   Sun Aug 31 10:45:44 2008 -0700
7998
7999     Moved initialization of TULIP Ethernet controller to board_eth_init()
8000
8001     Affected boards:
8002         cu824
8003         bab7xx
8004         adciop
8005         dasa_sim
8006         mousse
8007         mpc8540eval
8008         musenki
8009         mvblue
8010         pcippc2/pcippc6
8011         sbc8240
8012         stxssa
8013
8014     Removed initialization of the driver from net/eth.c
8015
8016     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8017
8018 commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
8019 Author: Ben Warren <biggerbadderben@gmail.com>
8020 Date:   Sun Aug 31 10:44:19 2008 -0700
8021
8022     Moved initialization of E1000 Ethernet controller to board_eth_init()
8023
8024     Affected boards:
8025         ap1000
8026         mvbc_p
8027         PM854
8028
8029     Removed initialization of the driver from net/eth.c
8030
8031     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8032
8033 commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
8034 Author: Ben Warren <biggerbadderben@gmail.com>
8035 Date:   Sun Aug 31 10:40:51 2008 -0700
8036
8037     Moved initialization of plb2800 Ethernet driver to board_eth_init
8038
8039     Affected boards:
8040         purple
8041
8042     Removed initialization of controller from net/eth.c
8043
8044     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8045
8046 commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
8047 Author: Ben Warren <biggerbadderben@gmail.com>
8048 Date:   Sun Aug 31 10:39:12 2008 -0700
8049
8050     Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
8051
8052     Modified board_eth_init() functions of boards that have this FEC in addition
8053     to other Ethernet controllers.
8054
8055     Affected boards:
8056         bc3450
8057         icecube
8058         mvbc_p
8059         o2dnt
8060         pm520
8061         total5200
8062         tq5200
8063
8064     Removed initialization of controller from net/eth.c
8065
8066     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8067
8068 commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
8069 Author: Ben Warren <biggerbadderben@gmail.com>
8070 Date:   Sun Aug 31 10:36:38 2008 -0700
8071
8072     Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
8073
8074     Added a cpu_eth_init() function to MPC512x CPU directory and
8075     removed code from net/eth.c
8076
8077     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8078
8079 commit 8218bd2aa68820b878a8413493ae17fd8d21f944
8080 Author: Ben Warren <biggerbadderben@gmail.com>
8081 Date:   Sun Aug 31 10:16:59 2008 -0700
8082
8083     Moved initialization of IncaIP Ethernet controller to board_eth_init
8084
8085     Affected boards:
8086         IncaIP
8087
8088     Removed initialization of the driver from net/eth.c
8089
8090     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8091
8092 commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
8093 Author: Ben Warren <biggerbadderben@gmail.com>
8094 Date:   Sun Aug 31 10:15:26 2008 -0700
8095
8096     Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
8097
8098         Affected boards:
8099             AmigaOneG3SE
8100
8101         Removed initialization of the driver from net/eth.c
8102
8103     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8104
8105 commit 6aca145e067efe75398e9fac97822bd3700de0b2
8106 Author: Ben Warren <biggerbadderben@gmail.com>
8107 Date:   Sun Aug 31 10:13:34 2008 -0700
8108
8109     Moved initialization of GT6426x Ethernet controller to board_eth_init()
8110
8111     Affected boards:
8112         EVB64260
8113         P3G4
8114         ZUMA
8115
8116     Removed initialization of the driver from net/eth.c
8117
8118     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8119
8120 commit e3090534d62045dcb73f5392bacc64a4e8e443dc
8121 Author: Ben Warren <biggerbadderben@gmail.com>
8122 Date:   Sun Aug 31 10:08:43 2008 -0700
8123
8124     Moved initialization of PCNET Ethernet controller to board_eth_init()
8125
8126     Affected boards:
8127         PN62
8128         sc520_cdp
8129
8130     Removed initialization of the driver from net/eth.c
8131
8132     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8133
8134 commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
8135 Author: Ben Warren <biggerbadderben@gmail.com>
8136 Date:   Sun Aug 31 10:07:16 2008 -0700
8137
8138     Moved initialization of NATSEMI Ethernet controller to board_eth_init()
8139
8140     Affected boards:
8141         a3000
8142
8143     Removed initialization of the driver from net/eth.c
8144
8145     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8146
8147 commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
8148 Author: Ben Warren <biggerbadderben@gmail.com>
8149 Date:   Sun Aug 31 10:03:22 2008 -0700
8150
8151     Moved initialization of NS8382X Ethernet controller to board_eth_init()
8152
8153     Affected boards:
8154         bc3450
8155         cpci5200
8156         mecp5200
8157         pf2000
8158         icecube
8159         o2dnt
8160         pm520
8161         sandpoint8245
8162         total5200
8163         tqm5200
8164
8165     Removed initialization of the driver from net/eth.c
8166
8167     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8168
8169 commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
8170 Author: Ben Warren <biggerbadderben@gmail.com>
8171 Date:   Sun Aug 31 09:59:33 2008 -0700
8172
8173     Moved initialization of TSI108 Ethernet controller to board_eth_init()
8174
8175     Affected boards:
8176         mpc7448hpc2
8177
8178     Removed initialization of the driver from net/eth.c
8179
8180     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8181
8182 commit 0b252f50ae218ae15bfb63af44227972686ebc56
8183 Author: Ben Warren <biggerbadderben@gmail.com>
8184 Date:   Sun Aug 31 21:41:08 2008 -0700
8185
8186     Moved initialization of RTL8139 Ethernet controller to board_eth_init()
8187
8188     Affected boards:
8189         hidden_dragon
8190         MPC8544DS
8191         MPC8610HPCN
8192         R2DPLUS
8193         TB0229
8194
8195     Removed initialization of the driver from net/eth.c
8196
8197     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8198
8199 commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
8200 Author: Ben Warren <biggerbadderben@gmail.com>
8201 Date:   Sun Aug 31 09:49:42 2008 -0700
8202
8203     Moved initialization of RTL8169 Ethernet controller to board_eth_init()
8204
8205     Affected boards:
8206         linkstation
8207         r7780mp
8208
8209     Removed initialization of the driver from net/eth.c
8210
8211     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8212
8213 commit 3ae071e44256144d6c1e3febb65f6c56bd433769
8214 Author: Ben Warren <biggerbadderben@gmail.com>
8215 Date:   Tue Aug 12 22:11:53 2008 -0700
8216
8217     Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
8218
8219     Removed at91sam9_eth_initialize() from net/eth.c
8220
8221     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8222
8223 commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
8224 Author: Ben Warren <biggerbadderben@gmail.com>
8225 Date:   Sun Aug 31 22:22:04 2008 -0700
8226
8227     Introduce netdev.h header file and remove externs
8228
8229     This addresses all drivers whose initializers have already
8230     been moved to board_eth_init()/cpu_eth_init().
8231
8232     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8233
8234 commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
8235 Author: Andy Fleming <afleming@freescale.com>
8236 Date:   Sun Aug 31 16:33:30 2008 -0500
8237
8238     Add pixis_set_sgmii command
8239
8240     The 8544DS and 8572DS platforms support an optional SGMII riser card to
8241     expose ethernet over an SGMII interface.  Once the card is in, it is also
8242     necessary to configure the board such that it uses the card, rather than
8243     the on-board ethernet ports.  This can either be done by flipping dip switches
8244     on the motherboard, or by modifying registers in the pixis.  Either way
8245     requires a reboot.
8246
8247     This adds a command to allow users to choose which ports are routed through
8248     the SGMII card, and which through the onboard ports.  It also allows users
8249     to revert to the current switch settings.
8250
8251     This code does not work on the 8572, as the PIXIS is different.
8252
8253     Signed-off-by: Andy Fleming <afleming@freescale.com>
8254     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8255
8256 commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
8257 Author: Andy Fleming <afleming@freescale.com>
8258 Date:   Sun Aug 31 16:33:29 2008 -0500
8259
8260     Add SGMII support for the 8544 DS
8261
8262     The 8544 DS has an optional SGMII Riser card, which uses different PHY
8263     addresses.  Check if we are in SGMII mode, and invoke the SGMII Riser
8264     setup code if so.
8265
8266     Signed-off-by: Andy Fleming <afleming@freescale.com>
8267     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8268
8269 commit 652f7c2eef76a1340928bd660845441e932d86a2
8270 Author: Andy Fleming <afleming@freescale.com>
8271 Date:   Sun Aug 31 16:33:28 2008 -0500
8272
8273     Add support for Freescale SGMII Riser Card
8274
8275     The 8544DS and 8572DS systems have an optional SGMII riser card which
8276     exposes new ethernet ports which are connected to the eTSECs via an
8277     SGMII interface.  The SGMII PHYs for this board are offset from the standard
8278     PHY addresses, so this code modifies the passed in tsec_info structure to
8279     use the SGMII PHYs on the card, instead.
8280
8281     Signed-off-by: Andy Fleming <afleming@freescale.com>
8282     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8283
8284 commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
8285 Author: Andy Fleming <afleming@freescale.com>
8286 Date:   Sun Aug 31 16:33:27 2008 -0500
8287
8288     Add SGMII support to the tsec
8289
8290     Adds support for configuring the TBI to talk properly with the SerDes.
8291
8292     Signed-off-by: Andy Fleming <afleming@freescale.com>
8293     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8294
8295 commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
8296 Author: Andy Fleming <afleming@freescale.com>
8297 Date:   Sun Aug 31 16:33:26 2008 -0500
8298
8299     Pass in tsec_info struct through tsec_initialize
8300
8301     The tsec driver contains a hard-coded array of configuration information
8302     for the tsec ethernet controllers.  We create a default function that works
8303     for most tsecs, and allow that to be overridden by board code.  It creates
8304     an array of tsec_info structures, which are then parsed by the corresponding
8305     driver instance to determine configuration.  Also, add regs, miiregs, and
8306     devname fields to the tsec_info structure, so that we don't need the kludgy
8307     "index" parameter.
8308
8309     Signed-off-by: Andy Fleming <afleming@freescale.com>
8310     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8311
8312 commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
8313 Author: Andy Fleming <afleming@freescale.com>
8314 Date:   Sun Aug 31 16:33:25 2008 -0500
8315
8316     tsec: Move tsec.h to include/
8317
8318     This is to prepare the way for board code passing in the tsec_info structure
8319
8320     Signed-off-by: Andy Fleming <afleming@freescale.com>
8321     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8322
8323 commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
8324 Author: Sergei Poselenov <sposelenov@emcraft.com>
8325 Date:   Fri Jun 6 15:52:44 2008 +0200
8326
8327     PHY: Add support for the M88E1121R Marvell chip.
8328
8329     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
8330     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
8331     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8332
8333 commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
8334 Author: Wolfgang Denk <wd@denx.de>
8335 Date:   Tue Sep 2 21:17:36 2008 +0200
8336
8337     fw_env.c: fix build problems with MTD_VERSION=old
8338
8339     (as needed to support old 2.4 Linux kernel based releases)
8340
8341     Signed-off-by: Wolfgang Denk <wd@denx.de>
8342
8343 commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
8344 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8345 Date:   Mon Sep 1 17:11:26 2008 +0200
8346
8347     device: make device_register() clone the device
8348
8349     This is expected by the callers, but this fact was hidden well within
8350     the old list implementation.
8351
8352     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8353
8354 commit c75e772a2f061a508bba28ded1b5bea91f0442b0
8355 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8356 Date:   Sun Aug 31 23:28:15 2008 +0900
8357
8358     sh: Remove CC line from board's Makefile
8359
8360     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8361
8362 commit 468eae0660de6fdfd9999944c536ecc4797bd944
8363 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8364 Date:   Sun Aug 31 23:25:57 2008 +0900
8365
8366     sh: Replaced "@./mkconfig" for @$(MKCONFIG)
8367
8368     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8369
8370 commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
8371 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8372 Date:   Thu Aug 28 14:50:52 2008 +0900
8373
8374     sh: Add support sh2 to MAKEALL
8375
8376     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8377     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8378
8379 commit 6f3d8bb5faa12dbf3031382286784c978df038ee
8380 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8381 Date:   Thu Aug 28 14:52:23 2008 +0900
8382
8383     sh: Fix compile error rsk7203 board
8384
8385     This boards used old type preprocessor.
8386     This patch fix compile error.
8387
8388     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8389     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8390
8391 commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
8392 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8393 Date:   Thu Aug 28 14:53:31 2008 +0900
8394
8395     sh: Fix compile error sh7785lcr board
8396
8397     This boards used old type preprocessor.
8398     This patch fix compile error.
8399
8400     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8401     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8402
8403 commit 6f0da4972e48f99d37bc522814940a6022cd3084
8404 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8405 Date:   Fri Aug 22 17:39:09 2008 +0900
8406
8407     sh: Renesas Solutions AP325RXA board support
8408
8409     AP325RXA is SH7723's reference board.
8410     This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
8411     In this patch, support SCIF, NOR Flash, and Ethernet.
8412
8413     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8414     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8415
8416 commit ab09f433b50bb83b5e440c335bc3839ee069e534
8417 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8418 Date:   Fri Aug 22 17:48:51 2008 +0900
8419
8420     sh: add support Renesas SH7723
8421
8422     Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
8423     This patch supports CPU register's header file and SCIF serial driver.
8424
8425     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8426     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8427
8428 commit c655fad06ba3fb042dbc667724a40e1a9a091248
8429 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8430 Date:   Sun Aug 31 23:02:04 2008 +0900
8431
8432     sh: Renesas RSK+ 7203 board support
8433
8434     This adds initial support for the RTE RSK+ SH7203 board.
8435
8436     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8437     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8438
8439 commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
8440 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8441 Date:   Thu Jul 3 23:11:02 2008 +0900
8442
8443     sh: Add support Renesas SH7203 processor
8444
8445     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8446     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8447
8448 commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
8449 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8450 Date:   Sun Aug 31 22:48:33 2008 +0900
8451
8452     sh: Add support SH2/SH2A which is CPU of Renesas Technology
8453
8454     Add support SH2/SH2A basic function.
8455
8456     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8457     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8458
8459 commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
8460 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8461 Date:   Sun Aug 31 22:45:08 2008 +0900
8462
8463     sh: Renesas R0P7785LC0011RL board support
8464
8465     This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
8466     Graphic, Ethernet, USB, SD, RTC, and I2C controller.
8467
8468     This patch supports the following functions:
8469      - 128MB DDR2-SDRAM (29-bit address mode only)
8470      - NOR Flash
8471      - USB host
8472      - Ethernet
8473
8474     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8475     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8476
8477 commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
8478 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8479 Date:   Thu Jul 10 19:32:53 2008 +0900
8480
8481     sh: add support for SH7785
8482
8483     Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
8484     This patch supports CPU register's header file.
8485
8486     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
8487     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8488
8489 commit d6e04258be8f2408845468d3cf722a4cf0433445
8490 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8491 Date:   Sun Aug 31 04:45:42 2008 +0200
8492
8493     davinci: fix remaining dm644x_eth
8494
8495     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8496
8497 commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
8498 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8499 Date:   Sun Aug 31 04:24:56 2008 +0200
8500
8501     fs: Move conditional compilation to Makefile
8502
8503     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8504
8505 commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
8506 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8507 Date:   Sun Aug 31 04:24:55 2008 +0200
8508
8509     devices: merge to list_head
8510
8511     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8512
8513 commit ef0255fc75f28655f9681422079287d68a14dbaa
8514 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8515 Date:   Sun Aug 31 04:24:51 2008 +0200
8516
8517     update linux/list
8518
8519     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8520
8521 commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
8522 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8523 Date:   Sun Aug 31 00:39:48 2008 +0200
8524
8525     smdk6400: add gitignore
8526
8527     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8528
8529 commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
8530 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8531 Date:   Sun Aug 31 00:39:48 2008 +0200
8532
8533     smdk6400: Use CONFIG_FLASH_CFI_DRIVER
8534
8535     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8536
8537 commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
8538 Author: Guennadi Liakhovetski <lg@denx.de>
8539 Date:   Sun Aug 31 00:39:47 2008 +0200
8540
8541     smdk6400: remove redundant bootargs definition
8542
8543     Double bootargs setting leads to a duplicated environmant entry.
8544
8545     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8546
8547 commit 11edcfe260f20dcea79284a3e95270989d433854
8548 Author: Guennadi Liakhovetski <lg@denx.de>
8549 Date:   Sun Aug 31 00:39:47 2008 +0200
8550
8551     ARM: Add support for S3C6400 based SMDK6400 board
8552
8553     SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
8554     driver for it too. The board can also boot from the NOR flash, but due to
8555     hardware limitations it can only address 64KiB on it, which is not enough
8556     for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
8557
8558     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8559
8560 commit e0056b341069796eaea11eae0fc8eb93a3dceaac
8561 Author: Guennadi Liakhovetski <lg@denx.de>
8562 Date:   Sun Aug 31 00:39:47 2008 +0200
8563
8564     NAND: add NAND driver for S3C64XX
8565
8566     Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
8567
8568     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8569
8570 commit 3fe7b589f9c7463df39056f8872006a67f56a91c
8571 Author: Guennadi Liakhovetski <lg@denx.de>
8572 Date:   Sun Aug 31 00:39:47 2008 +0200
8573
8574     S3C64XX: remove broken HWFLOW support from the serial driver
8575
8576     As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
8577     broken and currently unused. Remove it.
8578
8579     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8580
8581 commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
8582 Author: Guennadi Liakhovetski <lg@denx.de>
8583 Date:   Sun Aug 31 00:39:47 2008 +0200
8584
8585     serial: add S3C64XX serial driver
8586
8587     Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
8588
8589     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8590
8591 commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
8592 Author: Guennadi Liakhovetski <lg@denx.de>
8593 Date:   Sun Aug 31 00:39:46 2008 +0200
8594
8595     USB: Add support for OHCI controller on S3C6400
8596
8597     Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
8598     try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
8599     it should work too and we could still profit from instruction cache.
8600
8601     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8602
8603 commit 9b07773f8883665b002500c190507e9fd99b7181
8604 Author: Guennadi Liakhovetski <lg@denx.de>
8605 Date:   Sun Aug 31 00:39:46 2008 +0200
8606
8607     ARM: Add arm1176 core with S3C6400 SoC
8608
8609     Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
8610
8611     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
8612
8613 commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
8614 Author: Sandeep Paulraj <s-paulraj@ti.com>
8615 Date:   Sun Aug 31 00:39:46 2008 +0200
8616
8617     ARM DaVinci: Changing function names for EMAC driver
8618
8619     DM644x is just one of a series of DaVinci chips that use the EMAC driver.
8620     By replacing all the function names that start with dm644x_* to davinci_*
8621     we make these function more portable. I have tested this change on my EVM.
8622     DM6467 is another DaVinci SOC which uses the EMAC driver and i will
8623     be sending patches that add DaVinci DM6467 support to the list soon.
8624
8625     Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
8626
8627 commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
8628 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
8629 Date:   Sat Aug 30 23:21:30 2008 +0200
8630
8631     Integrator[AP/CP] - Remove unused file memsetup.S
8632
8633     - memsetup.s is changed/merged to lowlevel_init.S
8634       memsetup.S has a global label memsetup that just returns back to caller
8635     - memsetup global label is changed/merged to lowlevel_init
8636       This label is not called from anywhere.
8637
8638     Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
8639
8640 commit 89d51d022a63be1a851eda983c8cbce1a044f65f
8641 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8642 Date:   Wed Aug 27 21:35:52 2008 +0200
8643
8644     ARM DaVinci: Standardize names of directories/files
8645
8646     ARM DaVinci: Standardize names of directories/files.
8647
8648     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8649     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8650
8651 commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
8652 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8653 Date:   Fri Jul 11 15:10:13 2008 -0400
8654
8655     ARM DaVinci: Move common functions to board/davinci/common
8656
8657     ARM DaVinci: Move common functions to board/davinci/common.
8658
8659     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8660
8661 commit c2b4b2e4814f4ace9015fdb64132894327400bf0
8662 Author: Stefan Roese <sr@denx.de>
8663 Date:   Fri Aug 29 11:56:49 2008 +0200
8664
8665     ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
8666
8667     This function is needed for the new NAND infrastructure. We only need
8668     a dummy implementation though for the NDFC.
8669
8670     Signed-off-by: Stefan Roese <sr@denx.de>
8671
8672 commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
8673 Author: Stefan Roese <sr@denx.de>
8674 Date:   Fri Aug 29 12:06:27 2008 +0200
8675
8676     ppc4xx: Increase image size for NAND boot target
8677
8678     This is needed since now with HUSH enabled (amcc-common.h) the image
8679     read from NAND exceeds the previous limit.
8680
8681     Signed-off-by: Stefan Roese <sr@denx.de>
8682
8683 commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
8684 Author: Ben Warren <biggerbadderben@gmail.com>
8685 Date:   Thu Aug 28 23:58:30 2008 -0700
8686
8687     Move MPC512x_FEC driver to drivers/net
8688
8689     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8690
8691 commit 80b00af01b3c9154774de2936f05a051e92f6a03
8692 Author: Ben Warren <biggerbadderben@gmail.com>
8693 Date:   Thu Aug 28 23:58:29 2008 -0700
8694
8695     Move MPC5xxx_FEC driver to drivers/net
8696
8697     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8698
8699 commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
8700 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8701 Date:   Fri Aug 29 21:53:57 2008 +0200
8702
8703     cmd_terminal: remove no need ifdef
8704
8705     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8706
8707 commit 578118bdf122877ae769776be002255be447b4fa
8708 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8709 Date:   Fri Aug 29 21:53:57 2008 +0200
8710
8711     common/Makefile: order by functionality
8712
8713     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8714
8715 commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
8716 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8717 Date:   Fri Aug 29 21:53:56 2008 +0200
8718
8719     miiphyutil: Move conditional compilation to Makefile
8720
8721     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8722
8723 commit 81789c39db3f0f6b621df8c0ec66014d701f368e
8724 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8725 Date:   Fri Aug 29 21:53:37 2008 +0200
8726
8727     autoscript: Move conditional compilation to Makefile
8728
8729     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8730
8731 commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
8732 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8733 Date:   Fri Aug 29 01:18:11 2008 +0200
8734
8735     crc16: move to lib_generic
8736
8737     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8738
8739 commit 55195773eacefb22dd483a3c560ea30a14263ce1
8740 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8741 Date:   Fri Aug 29 01:18:01 2008 +0200
8742
8743     miiphybb: move to drivers/net/phy
8744
8745     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8746
8747 commit e8314035996a9118ac5948df2ff8a2f2161ed67a
8748 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8749 Date:   Thu Aug 28 12:31:51 2008 +0200
8750
8751     soft_spi: move to drivers/spi
8752
8753     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8754
8755 commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
8756 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8757 Date:   Thu Aug 28 12:31:51 2008 +0200
8758
8759     soft_i2c: move to drivers/i2c
8760
8761     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8762
8763 commit 717a222229fdb77703e9174d0eb08a4b41febf49
8764 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8765 Date:   Thu Aug 28 12:31:48 2008 +0200
8766
8767     gunzip: move to lib_generic
8768
8769     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8770
8771 commit 52aef8f9ba28b747973bf76741c23db658d5773c
8772 Author: Wolfgang Ocker <weo@reccoware.de>
8773 Date:   Tue Aug 26 19:55:23 2008 +0200
8774
8775     ppc4xx: NAND configuration
8776
8777     Made NAND bank configuration setting a config variable.
8778
8779     Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
8780     Signed-off-by: Stefan Roese <sr@denx.de>
8781
8782 commit 5bc542a593abc9e974fbd34704af85c37c366c60
8783 Author: Victor Gallardo <vgallardo@amcc.com>
8784 Date:   Thu Aug 28 16:03:28 2008 -0700
8785
8786     ppc4xx: fix UIC external_interrupt hang on UIC0
8787
8788     This patch fixes a UIC external_interrupt hang if critical or non-critical
8789     interrupt is set at the same time as a normal interrupt is set on UIC0.
8790
8791     Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
8792     Signed-off-by: Stefan Roese <sr@denx.de>
8793
8794 commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
8795 Author: Prodyut  Hazarika <phazarika@amcc.com>
8796 Date:   Wed Aug 27 16:39:00 2008 -0700
8797
8798     ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
8799
8800     Removed Magic numbers from Initialization preload registers
8801     Tested with Kilauea, Glacier, Canyonlands and Katmai boards
8802     About 5-7% improvement seen for LMBench memtests
8803
8804     Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
8805     Signed-off-by: Stefan Roese <sr@denx.de>
8806
8807 commit 8a490422bed685c9491274ec997f62061d88620b
8808 Author: John Rigby <jrigby@freescale.com>
8809 Date:   Thu Aug 28 13:17:07 2008 -0600
8810
8811     ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
8812
8813     MPC5121 rev 2 silicon has a new register for controlling how long
8814     CS is asserted after deassertion of ALE in multiplexed mode.
8815
8816     The default is to assert CS together with ALE.  The alternative
8817     is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
8818
8819     The default is wrong for the NOR flash and CPLD on the ADS5121.
8820
8821     This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
8822     it does so conditionally based on silicon rev 2.0 or greater.
8823
8824     Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
8825     Signed-off-by: John Rigby <jrigby@freescale.com>
8826
8827 commit 5d9a5efa4b332f442b54a755d49969123c3a8742
8828 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8829 Date:   Tue Aug 19 00:56:46 2008 +0600
8830
8831     Add I2C frequency dividers for ColdFire
8832
8833     The existing I2C freqency dividers for FDR does not apply
8834     to ColdFire platforms; thus, a seperate table is added
8835     based on MCF5xxx Reference Manual
8836
8837     Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
8838     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8839     Acked-by: Tabi Timur <timur@freescale.com>
8840
8841 commit eec567a67e00d1ed8d941e9098b7d421f4091abf
8842 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8843 Date:   Tue Aug 19 03:01:19 2008 +0600
8844
8845     ColdFire: I2C fix for multiple platforms
8846
8847     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8848
8849 commit d53cf6a9c7423cba668b867978648645f71c3090
8850 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8851 Date:   Tue Aug 19 00:37:13 2008 +0600
8852
8853     ColdFire: Add CONFIG_MII_INIT for M5272C3
8854
8855     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8856
8857 commit f78ced3028d4130b24a318943a70cf5584ab16f4
8858 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8859 Date:   Tue Aug 19 00:26:25 2008 +0600
8860
8861     ColdFire: Multiple fixes for MCF5445x platforms
8862
8863     Add FEC pin set and mii reset in __mii_init(). Change
8864     legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
8865     change cfi_offset to 0, and change CFG_FLASH_CFI to
8866     CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
8867     M54455EVB env settings in configuration file.
8868
8869     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8870
8871 commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
8872 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8873 Date:   Fri Aug 15 18:24:25 2008 +0000
8874
8875     ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
8876
8877     The user manuals recommend 7.
8878
8879     Signed-off-by: Kurt Mahan <kmahan@freescale.com>
8880     Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8881
8882 commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
8883 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8884 Date:   Fri Aug 15 16:50:07 2008 +0000
8885
8886     ColdFire: Raise uart baudrate to 115200 bps
8887
8888     M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
8889     uart baudrate increase from 19200 to 115200 bps
8890
8891     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8892
8893 commit ab6ba842682552ccf071d0034da0a20633d1d1ac
8894 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8895 Date:   Wed Aug 13 12:07:03 2008 +0000
8896
8897     ColdFire: Fix board.c warning message
8898
8899     Implicit declaration of nand_init() warning message
8900
8901     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8902
8903 commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
8904 Author: Kumar Gala <galak@kernel.crashing.org>
8905 Date:   Wed Aug 27 01:10:34 2008 -0500
8906
8907     FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
8908
8909     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8910
8911 commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
8912 Author: Heiko Schocher <hs@denx.de>
8913 Date:   Thu Aug 21 20:44:49 2008 +0200
8914
8915     mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
8916
8917     Signed-off-by: Heiko Schocher <hs@denx.de>
8918
8919 commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
8920 Author: Kumar Gala <galak@kernel.crashing.org>
8921 Date:   Tue Aug 19 14:46:36 2008 -0500
8922
8923     mpc85xx: remove redudant code with lib_ppc/interrupts.c
8924
8925     For some reason we duplicated the majority of code in lib_ppc/interrupts.c
8926     not show how that happened, but there is no good reason for it.
8927
8928     Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
8929     they exist.
8930
8931     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8932
8933 commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
8934 Author: Kumar Gala <galak@kernel.crashing.org>
8935 Date:   Fri Jul 25 13:31:05 2008 -0500
8936
8937     mpc85xx: Add support for the MPC8536DS reference board
8938
8939     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8940     Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
8941     Signed-off-by: Dejan Minic <minic@freescale.com>
8942     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8943     Signed-off-by: Dave Liu <daveliu@freescale.com>
8944     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8945
8946 commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
8947 Author: Kumar Gala <galak@kernel.crashing.org>
8948 Date:   Tue Aug 12 11:14:19 2008 -0500
8949
8950     mpc85xx: Add support for the MPC8536
8951
8952     The MPC8536 Adds SDHC and SATA controllers to the PQ3 family.  We
8953     also have SERDES init code for the 8536.
8954
8955     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8956     Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
8957     Signed-off-by: Dejan Minic <minic@freescale.com>
8958     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8959     Signed-off-by: Dave Liu <daveliu@freescale.com>
8960
8961 commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
8962 Author: Kumar Gala <galak@kernel.crashing.org>
8963 Date:   Tue Aug 12 11:13:08 2008 -0500
8964
8965     mpc85xx: Add support for the MPC8572DS reference board
8966
8967     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8968
8969 commit 457caecdbca3df21a93abff19eab12dbc61b7897
8970 Author: Kumar Gala <galak@kernel.crashing.org>
8971 Date:   Wed Aug 27 01:05:35 2008 -0500
8972
8973     FSL DDR: Remove old SPD support from cpu/mpc85xx
8974
8975     All 85xx boards have been converted to the new code so we can
8976     remove the old SPD DDR setup code.
8977
8978     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8979
8980 commit 0e7927db138976469e7257e29c1338050a50fcd9
8981 Author: Kumar Gala <galak@kernel.crashing.org>
8982 Date:   Wed Aug 27 01:04:07 2008 -0500
8983
8984     FSL DDR: Convert STXSSA to new DDR code.
8985
8986     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8987
8988 commit c360d9b970fbb9c13744c355879671165bbb9b9e
8989 Author: Kumar Gala <galak@kernel.crashing.org>
8990 Date:   Wed Aug 27 01:03:42 2008 -0500
8991
8992     FSL DDR: Convert STXGP3 to new DDR code.
8993
8994     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8995
8996 commit 8e55313b7ae12352a343f9b9962e662dbd897187
8997 Author: Kumar Gala <galak@kernel.crashing.org>
8998 Date:   Tue Aug 26 23:52:58 2008 -0500
8999
9000     FSL DDR: Convert SBC8560 to new DDR code.
9001
9002     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9003
9004 commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
9005 Author: Kumar Gala <galak@kernel.crashing.org>
9006 Date:   Tue Aug 26 23:52:32 2008 -0500
9007
9008     FSL DDR: Convert MPC8540EVAL to new DDR code.
9009
9010     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9011
9012 commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
9013 Author: Kumar Gala <galak@kernel.crashing.org>
9014 Date:   Tue Aug 26 23:52:07 2008 -0500
9015
9016     FSL DDR: Convert PM856 to new DDR code.
9017
9018     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9019
9020 commit d53bd3e17bd4f460257c19255569ea6dcfaae817
9021 Author: Kumar Gala <galak@kernel.crashing.org>
9022 Date:   Tue Aug 26 23:51:49 2008 -0500
9023
9024     FSL DDR: Convert PM854 to new DDR code.
9025
9026     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9027
9028 commit 33b9079ba20926f14238fff863b68a98e938948e
9029 Author: Kumar Gala <galak@kernel.crashing.org>
9030 Date:   Tue Aug 26 23:15:28 2008 -0500
9031
9032     FSL DDR: Convert sbc8548 to new DDR code.
9033
9034     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9035
9036 commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
9037 Author: Kumar Gala <galak@kernel.crashing.org>
9038 Date:   Tue Aug 26 23:14:14 2008 -0500
9039
9040     FSL DDR: Convert atum8548 to new DDR code.
9041
9042     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9043
9044 commit be0bd8234b9777ecd63c4c686f72af070d886517
9045 Author: Kumar Gala <galak@kernel.crashing.org>
9046 Date:   Tue Aug 26 22:56:56 2008 -0500
9047
9048     FSL DDR: Convert socrates to new DDR code.
9049
9050     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9051
9052 commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
9053 Author: Kumar Gala <galak@kernel.crashing.org>
9054 Date:   Tue Aug 26 08:02:30 2008 -0500
9055
9056     FSL DDR: Convert MPC8544DS to new DDR code.
9057
9058     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9059
9060 commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
9061 Author: Jon Loeliger <jdl@freescale.com>
9062 Date:   Tue Mar 18 13:51:05 2008 -0500
9063
9064     FSL DDR: Convert MPC8568MDS to new DDR code.
9065
9066     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9067     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9068
9069 commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
9070 Author: Jon Loeliger <jdl@freescale.com>
9071 Date:   Tue Mar 18 13:51:06 2008 -0500
9072
9073     FSL DDR: Convert MPC8548CDS to new DDR code.
9074
9075     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9076     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9077
9078 commit aa11d85cf318b961e029fe50d68ca47d004bce93
9079 Author: Jon Loeliger <jdl@freescale.com>
9080 Date:   Mon Mar 17 15:48:18 2008 -0500
9081
9082     FSL DDR: Convert MPC8541CDS to new DDR code.
9083
9084     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9085     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9086
9087 commit 2b40edb10d81da7bba724edbccd7f53777112579
9088 Author: Jon Loeliger <jdl@freescale.com>
9089 Date:   Tue Mar 18 11:12:42 2008 -0500
9090
9091     FSL DDR: Convert MPC8555ADS to new DDR code.
9092
9093     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9094     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9095
9096 commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
9097 Author: Jon Loeliger <jdl@freescale.com>
9098 Date:   Tue Mar 18 11:12:44 2008 -0500
9099
9100     FSL DDR: Convert MPC8560ADS to new DDR code.
9101
9102     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9103     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9104
9105 commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
9106 Author: Kumar Gala <galak@kernel.crashing.org>
9107 Date:   Fri Jun 6 13:12:18 2008 -0500
9108
9109     FSL DDR: Convert MPC8540ADS to new DDR code.
9110
9111     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9112
9113 commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
9114 Author: Kumar Gala <galak@kernel.crashing.org>
9115 Date:   Tue Aug 26 21:34:55 2008 -0500
9116
9117     FSL DDR: Add 85xx specific register setting
9118
9119     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9120
9121 commit 6fb1b7346849ccd0c20306143e334f5b76143070
9122 Author: Kumar Gala <galak@kernel.crashing.org>
9123 Date:   Mon Jun 9 11:07:46 2008 -0500
9124
9125     FSL DDR: Add e500 TLB helper for DDR code
9126
9127     Provide a helper function that board code can call to map TLBs when
9128     setting up DDR.
9129
9130     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9131
9132 commit d26b739afe5a6760bd345743188759cd9d0f3b47
9133 Author: Andrew Dyer <adyer@righthandtech.com>
9134 Date:   Tue Aug 26 17:03:38 2008 -0500
9135
9136     dm9000 remove dead external phy support, gpio fix
9137
9138     dm9000 has code to detect and initialize external phy parts, but later
9139     on in the code the part is forced to use the internal phy
9140     unconditionally.  Remove the unused/untested code.
9141
9142     change the GPIO initialization so that only the GPIO used as an
9143     internal phy reset (hardwired in the chip) is set as an output.  The
9144     remaining GPIO need to be handled by board specific code to prevent
9145     possible drive conflicts.  Set as inputs for safety.
9146
9147     replace a few magic numbers with defines
9148
9149     Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
9150     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9151
9152 commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
9153 Author: Peter Tyser <ptyser@xes-inc.com>
9154 Date:   Tue Aug 26 11:17:48 2008 -0500
9155
9156     Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
9157
9158     cmd_net.c command descriptions were updated to describe the optional
9159     hostIPaddr argument.  The dhcp command help message was also updated
9160     to more closely reflect the other commands in cmd_net.c
9161
9162     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9163     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9164
9165 commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
9166 Author: Remy Bohmer <linux@bohmer.net>
9167 Date:   Wed Aug 20 11:30:28 2008 +0200
9168
9169     Fix bogus error message in the DHCP handler
9170
9171     The DHCP handler has 1 state that is not listed in this case, causing a
9172     failure message when there is actually no failure.
9173
9174     Signed-off-by: Remy Bohmer <linux@bohmer.net>
9175     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9176
9177 commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
9178 Author: Remy Bohmer <linux@bohmer.net>
9179 Date:   Wed Aug 20 11:30:27 2008 +0200
9180
9181     Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
9182
9183     The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
9184     missing extern inside the net/bootp.h header
9185
9186     Signed-off-by: Remy Bohmer <linux@bohmer.net>
9187     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9188
9189 commit 1803f7f91ff35ca402259065df7557107dcf28a2
9190 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9191 Date:   Tue Aug 19 21:26:32 2008 +0000
9192
9193     ColdFire: Add FEC Buffer descriptors in SRAM
9194
9195     Add FEC Buffer descriptors and data buffer in SRAM for
9196     faster execution and access.
9197
9198     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9199     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9200
9201 commit 429be27ce195210d4b9decf9e867b9ca6155a87d
9202 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9203 Date:   Thu Aug 21 23:55:11 2008 +0000
9204
9205     Fix ColdFire FEC warning messages
9206
9207     Types mismatch and implicit declaration of icache_invalid()
9208     warning messages
9209
9210     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
9211     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9212
9213 commit 6a002171098e968bd5b362347d2831224fab6048
9214 Author: Ben Warren <biggerbadderben@gmail.com>
9215 Date:   Sat Jul 12 00:17:50 2008 -0700
9216
9217     Moved initialization of SKGE Ethernet driver to board code.
9218
9219     The only board using this driver is the SL8245 board.
9220     Removed initialization for the driver from net/eth.c
9221
9222     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9223
9224 commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
9225 Author: Ben Warren <biggerbadderben@gmail.com>
9226 Date:   Sat Jul 12 00:08:45 2008 -0700
9227
9228     Moved conditional compilation to Makefile for SK98 Ethernet driver
9229
9230     Brute-force removal of #ifdefs.  Didn't touch the code.
9231     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9232
9233 commit 65d3d99c28dc363d15eaee78225ff643df499b97
9234 Author: Ben Warren <biggerbadderben@gmail.com>
9235 Date:   Fri Jul 11 23:42:19 2008 -0700
9236
9237     Moved initialization of ULI526X Ethernet driver to board code.
9238
9239     The only board using this driver is the Freescale MPC8610HPCD board.
9240     Removed initialization for the driver from net/eth.c
9241
9242     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9243
9244 commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
9245 Author: Ben Warren <biggerbadderben@gmail.com>
9246 Date:   Fri Jul 11 23:15:28 2008 -0700
9247
9248     Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
9249
9250     Added board_eth_init() function to bf537-stamp board.
9251     Removed initialization for the Blackin EMAC driver from net/eth.c
9252
9253     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9254
9255 commit fc363ce35408f348cacced68505f3747a53e3d7c
9256 Author: Ben Warren <biggerbadderben@gmail.com>
9257 Date:   Wed Jul 9 01:04:19 2008 -0700
9258
9259     Moved initialization of GRETH Ethernet driver to CPU directory
9260
9261     Added a cpu_eth_init() function to leon2/leon3 CPU directories and
9262     removed code from net/eth.c
9263
9264     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9265
9266 commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
9267 Author: Ben Warren <biggerbadderben@gmail.com>
9268 Date:   Tue Aug 26 22:16:25 2008 -0700
9269
9270     Moved initialization of MCFFEC Ethernet driver to CPU directory
9271
9272     Added a cpu_eth_init() function to coldfire CPU directories and
9273     removed code from net/eth.c
9274
9275     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9276
9277 commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
9278 Author: Ben Warren <biggerbadderben@gmail.com>
9279 Date:   Tue Aug 26 22:12:36 2008 -0700
9280
9281     Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
9282
9283     Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
9284     removed code from net/eth.c
9285
9286     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9287
9288 commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
9289 Author: Kumar Gala <galak@kernel.crashing.org>
9290 Date:   Tue Aug 26 15:01:38 2008 -0500
9291
9292     FSL DDR: Remove old SPD support from cpu/mpc86xx
9293
9294     All 86xx boards have been converted to the new code so we can
9295     remove the old SPD DDR setup code.
9296
9297     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9298
9299 commit 9bd4e5911b750837515466bc7449087698b88e0e
9300 Author: Kumar Gala <galak@kernel.crashing.org>
9301 Date:   Tue Aug 26 15:01:37 2008 -0500
9302
9303     FSL DDR: Convert SBC8641D to new DDR code.
9304
9305     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9306
9307 commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
9308 Author: Jon Loeliger <jdl@freescale.com>
9309 Date:   Tue Aug 26 15:01:36 2008 -0500
9310
9311     FSL DDR: Convert MPC8610HPCD to new DDR code.
9312
9313     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9314     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9315
9316 commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
9317 Author: Kumar Gala <galak@kernel.crashing.org>
9318 Date:   Tue Aug 26 15:01:35 2008 -0500
9319
9320     FSL DDR: Convert MPC8641HPCN to new DDR code.
9321
9322     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9323     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9324
9325 commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
9326 Author: Kumar Gala <galak@kernel.crashing.org>
9327 Date:   Tue Aug 26 15:01:34 2008 -0500
9328
9329     FSL DDR: Add 86xx specific register setting
9330
9331     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9332
9333 commit 233fdd502a6c227f476212b3097653ad48d7e254
9334 Author: Kumar Gala <galak@kernel.crashing.org>
9335 Date:   Tue Aug 26 15:01:32 2008 -0500
9336
9337     FSL DDR: Add DDR2 DIMM paramter support
9338
9339     Compute DIMM parameters based upon the SPD information.
9340
9341     Signed-off-by: James Yang <James.Yang@freescale.com>
9342     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9343     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9344
9345 commit 05c05a2363a6ac11e0e405926034546ffad71fad
9346 Author: Kumar Gala <galak@kernel.crashing.org>
9347 Date:   Tue Aug 26 15:01:30 2008 -0500
9348
9349     FSL DDR: Add DDR1 DIMM paramter support
9350
9351     Compute DIMM parameters based upon the SPD information in spd.
9352
9353     Signed-off-by: James Yang <James.Yang@freescale.com>
9354     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9355     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9356
9357 commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
9358 Author: Kumar Gala <galak@kernel.crashing.org>
9359 Date:   Tue Aug 26 15:01:29 2008 -0500
9360
9361     FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
9362
9363     The main purpose of this rewrite it to be able to share the same
9364     initialization code on all FSL PowerPC products that have DDR
9365     controllers.  (83xx, 85xx, 86xx).
9366
9367     The code is broken up into the following steps:
9368         GET_SPD
9369         COMPUTE_DIMM_PARMS
9370         COMPUTE_COMMON_PARMS
9371         GATHER_OPTS
9372         ASSIGN_ADDRESSES
9373         COMPUTE_REGS
9374         PROGRAM_REGS
9375
9376     This allows us to share more code an easily allow for board specific code
9377     overrides.
9378
9379     Additionally this code base adds support for >4G of DDR and provides a
9380     foundation for supporting interleaving on processors with more than one
9381     controller.
9382
9383     Signed-off-by: James Yang <James.Yang@freescale.com>
9384     Signed-off-by: Jon Loeliger <jdl@freescale.com>
9385     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9386     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9387     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9388
9389 commit f784e32b4bce0013983506b11af4b85b8ca3d36e
9390 Author: Kumar Gala <galak@kernel.crashing.org>
9391 Date:   Tue Aug 26 15:01:28 2008 -0500
9392
9393     FSL DDR: Provide a generic set_ddr_laws()
9394
9395     Provide a helper function that will setup the last available
9396     LAWs (upto 2) for DDR.  Useful for SPD/dyanmic DDR setting code.
9397
9398     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9399
9400 commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
9401 Author: James Yang <James.Yang@freescale.com>
9402 Date:   Tue Aug 26 15:01:27 2008 -0500
9403
9404     Add proper SPD definitions for DDR1/2/3
9405
9406     Also adds helper functions for DDR1/2 to verify the checksum.
9407
9408     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9409
9410 commit 285db74716c724ae8a0ff177878fd09a74428c7b
9411 Author: Wolfgang Denk <wd@denx.de>
9412 Date:   Wed Aug 27 01:02:48 2008 +0200
9413
9414     Update CHANGELOG
9415
9416     Signed-off-by: Wolfgang Denk <wd@denx.de>
9417
9418 commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
9419 Author: Heiko Schocher <hs@denx.de>
9420 Date:   Tue Aug 19 10:08:49 2008 +0200
9421
9422     Add support for muas3001 board (MPC8270)
9423
9424     Signed-off-by: Heiko Schocher <hs@denx.de>
9425
9426 commit 322098bff32410d2a00031649b47c4ec90a66d9a
9427 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
9428 Date:   Tue Aug 19 08:31:18 2008 +0530
9429
9430     common/cmd_load.c cleanup - remove unused variables
9431
9432     - Remove unused global variable os_data_count.
9433     - Remove unused variable z.
9434
9435     Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
9436
9437 commit 306620b762a4f9fa6678568ad2e8772dec145208
9438 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9439 Date:   Mon Aug 18 13:35:27 2008 +0200
9440
9441     remove MVS1 board
9442
9443     MVS1 board has reached end-of-life and can be removed completely.
9444
9445     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9446
9447 commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
9448 Author: Kumar Gala <galak@kernel.crashing.org>
9449 Date:   Fri Aug 15 08:24:45 2008 -0500
9450
9451     bootm: refactor do_reset and os boot function args
9452
9453     There is no need for each OS specific function to call do_reset() we
9454     can just do it once in bootm. This means its feasible on an error for
9455     the OS boot function to return.
9456
9457     Also, remove passing in cmd_tbl_t as its not needed by the OS boot
9458     functions.  flag isn't currently used but might be in the future so
9459     we left it alone.
9460
9461     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9462
9463 commit 40afac22a9c602e55c501c800f1c064324711b56
9464 Author: Kumar Gala <galak@kernel.crashing.org>
9465 Date:   Fri Aug 15 08:24:44 2008 -0500
9466
9467     fdt: Added resize command
9468
9469     Resize the fdt to size + padding to 4k boundary
9470
9471     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9472
9473 commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
9474 Author: Kumar Gala <galak@kernel.crashing.org>
9475 Date:   Fri Aug 15 08:24:43 2008 -0500
9476
9477     fdt: refactor initrd related code
9478
9479     Created a new fdt_initrd() to deal with setting the initrd properties
9480     in the device tree and fixing up the mem reserve.  We can use this
9481     both in the choosen node handling and lets us remove some duplicated
9482     code when we fixup the initrd info in bootm on PPC.
9483
9484     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9485
9486 commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
9487 Author: Kumar Gala <galak@kernel.crashing.org>
9488 Date:   Fri Aug 15 08:24:42 2008 -0500
9489
9490     fdt: refactor fdt resize code
9491
9492     Move the fdt resizing code out of ppc specific boot code and into
9493     common fdt support code.
9494
9495     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9496
9497 commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
9498 Author: Kumar Gala <galak@kernel.crashing.org>
9499 Date:   Fri Aug 15 08:24:41 2008 -0500
9500
9501     bootm: refactor image detection and os load steps
9502
9503     Created a bootm_start() that handles the parsing and detection of all
9504     the images that will be used by the bootm command (OS, ramdisk, fdt).
9505     As part of this we now tract all the relevant image offsets in the
9506     bootm_headers_t struct. This will allow us to have all the needed
9507     state for future sub-commands and lets us reduce a bit of arch
9508     specific code on SPARC.
9509
9510     Created a bootm_load_os() that deals with decompression and loading
9511     the OS image.
9512
9513     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9514
9515 commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
9516 Author: Kumar Gala <galak@kernel.crashing.org>
9517 Date:   Fri Aug 15 08:24:40 2008 -0500
9518
9519     bootm: move lmb into the bootm_headers_t structure
9520
9521     To allow for persistent state between future bootm subcommands we
9522     need the lmb to exist in a global state.
9523     Moving it into the bootm_headers_t allows us to do that.
9524
9525     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9526
9527 commit 54f9c86691309b2f919f567f9255b8bcad2c7651
9528 Author: Kumar Gala <galak@kernel.crashing.org>
9529 Date:   Fri Aug 15 08:24:39 2008 -0500
9530
9531     bootm: Set working fdt address as part of the bootm flow
9532
9533     Set the fdt working address so "fdt FOO" commands can be used as part
9534     of the bootm flow.  Also set an the environment variable "fdtaddr"
9535     with the value.
9536
9537     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9538
9539 commit 06a09918f3903450313e2047a9cc258bf5872f46
9540 Author: Kumar Gala <galak@kernel.crashing.org>
9541 Date:   Fri Aug 15 08:24:38 2008 -0500
9542
9543     bootm: refactor fdt locating and relocation code
9544
9545     Move the code that handles finding a device tree blob and relocating
9546     it (if needed) into common code so all arch's have access to it.
9547
9548     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9549
9550 commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
9551 Author: Kumar Gala <galak@kernel.crashing.org>
9552 Date:   Fri Aug 15 08:24:37 2008 -0500
9553
9554     bootm: refactor ramdisk locating code
9555
9556     Move determing if we have a ramdisk and where its located into the
9557     common code. Keep track of the ramdisk start and end in the
9558     bootm_headers_t image struct.
9559
9560     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9561
9562 commit c160a9544743e80e8889edb2275538e7764ce334
9563 Author: Kumar Gala <galak@kernel.crashing.org>
9564 Date:   Fri Aug 15 08:24:36 2008 -0500
9565
9566     bootm: refactor entry point code
9567
9568     Move entry point code out of each arch and into common code.
9569     Keep the entry point in the bootm_headers_t images struct.
9570
9571     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9572
9573 commit 20220d22b9f41446288588cd2e457e0077a18bed
9574 Author: Randy Vinson <rvinson@mvista.com>
9575 Date:   Wed Aug 13 11:44:57 2008 -0700
9576
9577     mpc7448hpc2: Fix PCI I/O space mapping.
9578
9579     PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
9580     PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
9581     space such that 0xFA000000 in the processor's address space maps to 0
9582     on the PCI I/O bus.
9583
9584     Signed-off-by Randy Vinson <rvinson@mvista.com>
9585     Acked-by: Roy Zang <tie-fei.zang@freescale.com>
9586
9587 commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
9588 Author: Guennadi Liakhovetski <lg@denx.de>
9589 Date:   Wed Aug 13 18:10:26 2008 +0200
9590
9591     i.MX31: Specify maintainers for i.MX31-based boards
9592
9593     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
9594     Signed-off-by: Wolfgang Denk <wd@denx.de>
9595
9596 commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
9597 Author: Wolfgang Denk <wd@denx.de>
9598 Date:   Tue Aug 26 15:01:28 2008 +0200
9599
9600     ADS5121: adjust image addresses in RAM and flash
9601
9602     Use the same mapping in flash as used by Linux
9603
9604     Signed-off-by: Wolfgang Denk <wd@denx.de>
9605
9606 commit 19f101412c16edee9fd55db4039e1d68a833b28b
9607 Author: Wolfgang Denk <wd@denx.de>
9608 Date:   Tue Aug 26 13:14:34 2008 +0200
9609
9610     cmd_mem.c: Fix help message alignment
9611
9612     Bug was introced by "Big white-space cleanup" (53677ef1)
9613
9614     Signed-off-by: Wolfgang Denk <wd@denx.de>
9615
9616 commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
9617 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9618 Date:   Wed Aug 20 11:11:52 2008 +0200
9619
9620     change mvBL-M7 default env and move to vendor subdir
9621
9622     fix mvBL-M7 config and move to matrix_vision subdir
9623
9624     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9625     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9626
9627 commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
9628 Author: Nick Spence <nick.spence@freescale.com>
9629 Date:   Fri Aug 22 23:52:40 2008 -0700
9630
9631     MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
9632
9633     This patch adds elements to the 83xx sysconf structure and #define values that are used
9634     by mpc83xx family devices.
9635
9636     Signed-off-by: Nick Spence <nick.spence@freescale.com>
9637     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9638
9639 commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
9640 Author: Ira W. Snyder <iws@ovro.caltech.edu>
9641 Date:   Fri Aug 22 11:00:15 2008 -0700
9642
9643     MPC8349EMDS: Add PCI Agent (PCISLAVE) support
9644
9645     Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
9646     PCI card rather than a host computer.
9647
9648     Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
9649     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9650
9651 commit 4ff9aea9d6b5602683a920951ef896996438af62
9652 Author: Ira W. Snyder <iws@ovro.caltech.edu>
9653 Date:   Fri Aug 22 11:00:14 2008 -0700
9654
9655     mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
9656
9657     This adds a helper function to unlock the PCI configuration bit, so that
9658     any extra PCI setup (such as outbound windows, etc.) can be done after
9659     using the 83XX_GENERIC_PCI code to set up the PCI bus.
9660
9661     Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
9662     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9663
9664 commit 162338e1fcde231ca4d562e5ebd7859456731691
9665 Author: Ira W. Snyder <iws@ovro.caltech.edu>
9666 Date:   Fri Aug 22 11:00:13 2008 -0700
9667
9668     MPC8349EMDS: use 83XX_GENERIC_PCI setup code
9669
9670     Change the MPC8349EMDS board to use the generic PCI initialization code
9671     for the mpc83xx cpu.
9672
9673     Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
9674     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9675
9676 commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
9677 Author: Kim Phillips <kim.phillips@freescale.com>
9678 Date:   Mon Aug 25 14:53:09 2008 -0500
9679
9680     fix out of tree building
9681
9682     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9683
9684 commit a49d10cf027d059ee15c262010a05cdaec0961e1
9685 Author: Wolfgang Denk <wd@denx.de>
9686 Date:   Mon Aug 25 23:45:41 2008 +0200
9687
9688     Minor coding style cleanup, updte CHANGELOG
9689
9690     Signed-off-by: Wolfgang Denk <wd@denx.de>
9691
9692 commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
9693 Author: Stefan Roese <sr@denx.de>
9694 Date:   Wed Aug 20 20:29:38 2008 +0200
9695
9696     RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
9697
9698     This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
9699     to combine both config options into one line. This even allows defining
9700     both options and not generating the target object twice.
9701
9702     Signed-off-by: Stefan Roese <sr@denx.de>
9703
9704 commit 079edb913dbae147b50a488cf02e03f473fc5f28
9705 Author: Jens Gehrlein <sew_s@tqs.de>
9706 Date:   Fri Jul 4 16:50:05 2008 +0200
9707
9708     MX31: fix bit masks in function mx31_decode_pll()
9709
9710     Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
9711
9712     Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
9713
9714 commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
9715 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
9716 Date:   Mon Aug 25 11:11:34 2008 +0200
9717
9718     Correct ARM Versatile Timer Initialization
9719
9720      - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
9721        -- Timer Value Register @ TIMER Base + 4 is Read-only.
9722        -- Prescale Value (Bits 3-2 of TIMER Control register)
9723         can only be one of 00,01,10. 11 is undefined.
9724        -- CFG_HZ for Versatile board is set to
9725         #define CFG_HZ          (1000000 / 256)
9726         So Prescale bits is set to indicate
9727         - 8 Stages of Prescale, Clock divided by 256
9728      - The Timer Control Register has one Undefined/Shouldn't Use Bit
9729        So we should do read/modify/write Operation
9730
9731     Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
9732
9733 commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
9734 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
9735 Date:   Mon Aug 25 11:30:29 2008 +0200
9736
9737     Add ARM AMBA PL031 RTC Support
9738
9739     Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
9740
9741 commit e39411674669cc880e1ec4a8ca4794fb15c33a45
9742 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9743 Date:   Tue Aug 19 16:21:03 2008 -0400
9744
9745     ARM DaVinci: Removed redundant NAND initialization code.
9746
9747     ARM DaVinci: Removed redundant NAND initialization code.
9748
9749     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9750
9751 commit b3fb663b20d995ca41327db877ddb168279b3f62
9752 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9753 Date:   Tue Aug 19 16:21:00 2008 -0400
9754
9755     ARM DaVinci: Fix compilation error with new MTD code.
9756
9757     ARM DaVinci: Fix compilation error with new MTD code.
9758
9759     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9760
9761 commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
9762 Author: Gerald Van Baren <vanbaren@cideas.com>
9763 Date:   Fri Aug 22 14:37:05 2008 -0400
9764
9765     Add note on dereferencing /aliases pointers
9766
9767     Replace the "must quote special characters" note with a hint on
9768     how to dereference /aliases pointers by omitting the leading "/".
9769     This feature was introduced by Kumar Gala as a libfdt enhancement
9770     in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
9771
9772     Example:
9773
9774     => fdt print /aliases
9775     aliases {
9776             ethernet0 = "/qe@e0100000/ucc@2000";
9777             ethernet1 = "/qe@e0100000/ucc@3000";
9778             serial0 = "/soc8360@e0000000/serial@4500";
9779             serial1 = "/soc8360@e0000000/serial@4600";
9780             pci0 = "/pci@e0008500";
9781     };
9782     => fdt print ethernet0
9783     ucc@2000 {
9784             device_type = "network";
9785             compatible = "ucc_geth";
9786             cell-index = <0x1>;
9787             reg = <0x2000 0x200>;
9788             interrupts = <0x20>;
9789             interrupt-parent = <0x2>;
9790             local-mac-address = [00 00 00 00 00 00];
9791             rx-clock-name = "none";
9792             tx-clock-name = "clk9";
9793             phy-handle = <0x3>;
9794             phy-connection-type = "rgmii-id";
9795             pio-handle = <0x4>;
9796     };
9797
9798     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9799
9800 commit feeca3f578b7f53c032ba203698751c982f8bf5a
9801 Author: Kumar Gala <galak@kernel.crashing.org>
9802 Date:   Thu Aug 14 08:28:19 2008 -0500
9803
9804     libfdt: Add support for using aliases in fdt_path_offset()
9805
9806     If the path doesn't start with '/' check to see if it matches some alias
9807     under "/aliases" and substitute the matching alias value in the path
9808     and retry the lookup.
9809
9810     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9811     Acked-by: David Gibson <david@gibson.dropbear.id.au>
9812     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
9813
9814 commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
9815 Author: David Gibson <david@gibson.dropbear.id.au>
9816 Date:   Wed Aug 6 14:50:49 2008 +1000
9817
9818     libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
9819
9820     As well as fdt_subnode_offset(), libfdt includes an
9821     fdt_subnode_offset_namelen() function that takes the subnode name to
9822     look up not as a NUL-terminated string, but as a string with an
9823     explicit length.  This can be useful when the caller has the name as
9824     part of a longer string, such as a full path.
9825
9826     However, we don't have corresponding 'namelen' versions for
9827     fdt_get_property() and fdt_getprop().  There are less obvious use
9828     cases for these variants on property names, but there are
9829     circumstances where they can be useful e.g. looking up property names
9830     which need to be parsed from a longer string buffer such as user input
9831     or a configuration file, or looking up an alias in a path with
9832     IEEE1275 style aliases.
9833
9834     So, since it's very easy to implement such variants, this patch does
9835     so.  The original NUL-terminated variants are, of course, implemented
9836     in terms of the namelen versions.
9837
9838     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9839
9840 commit f171746f701ea58bf6a53e835b53d2aaebee0d81
9841 Author: David Gibson <david@gibson.dropbear.id.au>
9842 Date:   Tue Jul 29 14:51:22 2008 +1000
9843
9844     libfdt: Forgot one function when cleaning the namespace
9845
9846     In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
9847     libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
9848     chance of collisions with things from whatever package libfdt is
9849     embedded in, pulled into the libfdt build via that environment's
9850     libfdt_env.h.
9851
9852     Except... I missed one.  This patch applies the same treatment to
9853     _stringlist_contains().  While we're at it, also make it static since
9854     it's only used in the same file.
9855
9856     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9857
9858 commit 46390da15411351fc3b498bd8c1615f78fe80df0
9859 Author: Wolfram Sang <w.sang@pengutronix.de>
9860 Date:   Wed Jul 9 11:22:44 2008 +0200
9861
9862     libfdt: Improve documentation in libfdt.h
9863
9864     Fix a few typos and mistakes.
9865
9866     Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
9867     Acked-by: David Gibson <david@gibson.dropbear.id.au>
9868
9869 commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
9870 Author: David Gibson <david@gibson.dropbear.id.au>
9871 Date:   Wed Jul 9 14:10:24 2008 +1000
9872
9873     libfdt: Increase namespace-pollution paranoia
9874
9875     libfdt is supposed to easy to embed in projects all and sundry.
9876     Often, it won't be practical to separate the embedded libfdt's
9877     namespace from that of the surrounding project.  Which means there can
9878     be namespace conflicts between even libfdt's internal/static functions
9879     and functions or macros coming from the surrounding project's headers
9880     via libfdt_env.h.
9881
9882     This patch, therefore, renames a bunch of libfdt internal functions
9883     and macros and makes a few other chances to reduce the chances of
9884     namespace collisions with embedding projects.  Specifically:
9885         - Internal functions (even static ones) are now named _fdt_*()
9886
9887         - The type and (static) global for the error table in
9888               fdt_strerror() gain an fdt_ prefix
9889
9890         - The unused macro PALIGN is removed
9891
9892         - The memeq and streq macros are removed and open-coded in the
9893               users (they were only used once each)
9894
9895         - Other macros gain an FDT_ prefix
9896
9897         - To save some of the bulk from the previous change, an
9898               FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
9899               FDT_ALIGN(x, FDT_TAGSIZE)
9900
9901     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9902
9903 commit c66830263af19831f2b7db307f79d1943febf7f9
9904 Author: David Gibson <david@gibson.dropbear.id.au>
9905 Date:   Mon Jul 7 10:14:15 2008 +1000
9906
9907     dtc: Enable and fix -Wcast-qual warnings
9908
9909     Enabling -Wcast-qual warnings in dtc shows up a number of places where
9910     we are incorrectly discarding a const qualification.  There are also
9911     some places where we are intentionally discarding the 'const', and we
9912     need an ugly cast through uintptr_t to suppress the warning.  However,
9913     most of these are pretty well isolated with the *_w() functions.  So
9914     in the interests of maximum safety with const qualifications, this
9915     patch enables the warnings and fixes the existing complaints.
9916
9917     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9918     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
9919
9920 commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
9921 Author: David Gibson <david@gibson.dropbear.id.au>
9922 Date:   Mon Jul 7 10:10:48 2008 +1000
9923
9924     dtc: Enable and fix -Wpointer-arith warnings
9925
9926     This patch turns on the -Wpointer-arith option in the dtc Makefile,
9927     and fixes the resulting warnings due to using (void *) in pointer
9928     arithmetic.  While convenient, pointer arithmetic on void * is not
9929     portable, so it's better that we avoid it, particularly in libfdt.
9930
9931     Also add necessary definition of uintptr_t needed by David Gibson's
9932     changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
9933     comes from stdint.h, which u-boot doesn't have). -- gvb
9934
9935     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9936     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9937
9938 commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
9939 Author: Tirumala R Marri <tmarri@amcc.com>
9940 Date:   Thu Aug 21 21:54:53 2008 -0700
9941
9942     ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
9943
9944     During recent PCI-E tests it has been found that current
9945     driverl level and de-emphasis values are not set correctly.
9946     After sweeping throgh all de-ephasis values, it was found that
9947     0x130 is a right value. Where 0x13 is driver level and 0 is
9948     de-emphasis.
9949
9950     Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
9951     Signed-off-by: Stefan Roese <sr@denx.de>
9952
9953 commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
9954 Author: Remy Bohmer <linux@bohmer.net>
9955 Date:   Wed Aug 20 20:46:56 2008 +0200
9956
9957     Make the YAFFS filesystem work
9958
9959     Recently the YAFFS filesystem support has been added to U-boot.
9960     However, just enabling CONFIG_YAFFS2 is not enough to get it working.
9961
9962     ymount will generate an exception (when dereferencing mtd->readoob()), because
9963     the genericDevice is a null pointer. Further, a lot of logging is produced
9964     while using YAFFS fs, so logging should also be disabled.
9965     Both issues are solved by this patch.
9966
9967     With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
9968     in U-boot, as well as in Linux.
9969
9970     Tested on a Atmel AT91SAM9261EK board.
9971
9972     Signed-off-by: Remy Bohmer <linux@bohmer.net>
9973     Acked-by: William Juul <william.juul@tandberg.com>
9974     Signed-off-by: Scott Wood <scottwood@freescale.com>
9975
9976 commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
9977 Author: Kyungmin Park <kmpark@infradead.org>
9978 Date:   Tue Aug 19 08:42:53 2008 +0900
9979
9980     Fix OneNAND read_oob/write_oob functions compatability
9981
9982     Also sync with kernel OneNAND codes
9983
9984     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9985     Signed-off-by: Scott Wood <scottwood@freescale.com>
9986
9987 commit 8d765456c1d33f2010d2717ee58de7647fdc6346
9988 Author: Scott Wood <scottwood@freescale.com>
9989 Date:   Mon Aug 18 17:11:20 2008 -0500
9990
9991     NAND: Remove delay from nand_boot_fsl_elbc.c.
9992
9993     It was for debugging purposes, and shouldn't have been left in.
9994
9995     Signed-off-by: Scott Wood <scottwood@freescale.com>
9996
9997 commit f556483734126793522fb7a8cf36af90da78f084
9998 Author: Stefan Roese <sr@denx.de>
9999 Date:   Thu Aug 21 11:05:03 2008 +0200
10000
10001     ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
10002
10003     This patch fixes some minor issues introduced with the patch:
10004     ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
10005
10006     - Rework memory-queue and PLB arbiter optimization code, that the
10007       local variable is not needed anymore. This removes one #ifdef.
10008     - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
10009       of XXX+ 0x01). This was not introduced by Prodyut, just a
10010       copy-paste problem.
10011
10012     Signed-off-by: Stefan Roese <sr@denx.de>
10013
10014 commit 079589bcfb24ba11068460276a3cc9549ab5346f
10015 Author: Prodyut  Hazarika <phazarika@amcc.com>
10016 Date:   Wed Aug 20 09:38:51 2008 -0700
10017
10018     ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
10019         PPC405EX and PPC460EX/GT/SX
10020
10021     - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
10022       processors
10023     - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
10024       across processors (405 and 440/460)
10025     - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
10026       processors
10027     - Add register bit definitions for Memory Queue Configuration registers
10028
10029     Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
10030     Signed-off-by: Stefan Roese <sr@denx.de>
10031
10032 commit ba37aa03287c5483c61c0a3e320c8888bee0143a
10033 Author: Kumar Gala <galak@kernel.crashing.org>
10034 Date:   Tue Aug 19 15:41:18 2008 -0500
10035
10036     fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
10037
10038     Move to using the environment variables 'ethaddr', 'eth1addr', etc..
10039     instead of bd->bi_enetaddr, bi_enet1addr, etc.
10040
10041     This makes the code a bit more flexible to the number of ethernet
10042     interfaces.
10043
10044     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10045
10046 commit 4cacf7c64609839f809e2f9c45873f1d65861703
10047 Author: Stefan Roese <sr@denx.de>
10048 Date:   Tue Aug 19 14:57:55 2008 +0200
10049
10050     hush: Fix printf debug macro in hush.c so that it usable in U-Boot
10051
10052     This patch changes the debug_printf() marco for U-Boot in hush.c and
10053     moves the definition of DEBUG_SHELL to a place that is actually compiled
10054     under U-Boot.
10055
10056     Signed-off-by: Stefan Roese <sr@denx.de>
10057
10058 commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
10059 Author: Heiko Schocher <hs@denx.de>
10060 Date:   Tue Aug 19 09:57:41 2008 +0200
10061
10062     cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
10063
10064     Commit      00b1883a4cac59d97cd297b1a3a398db85982865
10065     missed a few boards:
10066         include/configs/M5253DEMO.h
10067         include/configs/ml507.h
10068         include/configs/redwood.h
10069
10070     This patch fixes this.
10071
10072     Signed-off-by: Heiko Schocher <hs@denx.de>
10073
10074 commit 0768b7a872964085eece8d5e9fec9175e9deb161
10075 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10076 Date:   Mon Aug 18 13:41:27 2008 +0200
10077
10078     Consolidate strmhz() implementation
10079
10080     ARM, i386, m68k and ppc all have identical implementations of strmhz().
10081     Other architectures don't provide this function at all.
10082
10083     This patch moves strmhz() into lib_generic, reducing code duplication
10084     and providing a more unified API across architectures.
10085
10086     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10087
10088 commit a928d0df211f1d829308d335d19be3ca42558dfc
10089 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
10090 Date:   Mon Aug 18 12:02:51 2008 +0200
10091
10092     fix mvbc_p board build warnings
10093
10094     fix build warnings @ mvBC-P board by using correct types, i.e. change
10095     out_be32 to out_be16 and out_8 accordingly.
10096
10097     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
10098
10099 commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
10100 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10101 Date:   Sat Aug 16 18:54:27 2008 +0200
10102
10103     Makefile: fix posix support on find
10104
10105     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10106
10107 commit bef92e215d945cc574399c1a1b00a3a76d35aa03
10108 Author: Axel Beierlein <belatronix@web.de>
10109 Date:   Sat Aug 16 00:30:48 2008 +0200
10110
10111     Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
10112
10113     Tested with TQM5200S on STK52XX.200 Board
10114
10115     Signed-off-by: Axel Beierlein <belatronix@web.de>
10116
10117 commit 0800707b6d5041a840a65d556032c15c584b55f8
10118 Author: Peter Tyser <ptyser@xes-inc.com>
10119 Date:   Fri Aug 15 14:36:32 2008 -0500
10120
10121     mod_i2c_mem() bugfix
10122
10123     The last used chip, address, and address length were not being
10124     stored for the imm and imn commands.
10125
10126     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10127
10128 commit 4afbef967275b2f636abae86f91b81becee7ad03
10129 Author: Steven A. Falco <sfalco@harris.com>
10130 Date:   Fri Aug 15 15:37:31 2008 -0400
10131
10132     Fix typo in spelling of ATAPI.
10133
10134     Correct a small spelling mistake.
10135
10136     Signed-off-by: Steven A. Falco <sfalco@harris.com>
10137
10138 commit 36c2d3062ecc6ab85f8e237180eb134464c48418
10139 Author: Steven A. Falco <sfalco@harris.com>
10140 Date:   Fri Aug 15 15:34:10 2008 -0400
10141
10142     Add a hook to allow board-specific PIO mode setting.
10143
10144     This patch adds a hook whereby a board-specific routine can be called to
10145     configure hardware for a PIO mode.  The prototype for the board-specific
10146     routine is:
10147
10148         int inline ide_set_piomode(int pio_mode)
10149
10150     ide_set_piomode should be prepared to configure hardware for a pio_mode
10151     between 0 and 6, inclusive.  It should return 0 on success or 1 on failure.
10152
10153     Signed-off-by: Steven A. Falco <sfalco@harris.com>
10154
10155 commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
10156 Author: Steven A. Falco <sfalco@harris.com>
10157 Date:   Fri Aug 15 15:29:12 2008 -0400
10158
10159     Replace enums in ata.h with an include of libata.h
10160
10161     This patch removes some enums from ata.h and replaces them with an
10162     include of libata.h.  This way, we eliminate duplicated code, and
10163     prevent errors whereby the different versions could be out of sync.
10164
10165     Signed-off-by: Steven A. Falco <sfalco@harris.com>
10166
10167 commit 0de0afbca865ecf482b4d2b635236746def8518f
10168 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10169 Date:   Fri Aug 15 18:32:41 2008 +0200
10170
10171     coldfire: fix CFI drivers activation with new macro
10172
10173     rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
10174
10175     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10176
10177 commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
10178 Author: Kumar Gala <galak@kernel.crashing.org>
10179 Date:   Fri Aug 15 08:24:35 2008 -0500
10180
10181     fdt: fdt addr w/o any args reports back the current working address
10182
10183     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10184
10185 commit f953d99fd528a496b400a706b511eaf8e3ea66af
10186 Author: Kumar Gala <galak@kernel.crashing.org>
10187 Date:   Fri Aug 15 08:24:34 2008 -0500
10188
10189     fdt: added the ability to set initrd start/end via chosen command
10190
10191     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10192
10193 commit ffa4bafacaef67058463b3d7d0099ced57569dd2
10194 Author: Kumar Gala <galak@kernel.crashing.org>
10195 Date:   Fri Aug 15 08:24:33 2008 -0500
10196
10197     Add command to enable/disable interrupts
10198
10199     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10200
10201 commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
10202 Author: Nick Spence <nick.spence@freescale.com>
10203 Date:   Tue Aug 19 22:21:16 2008 -0700
10204
10205     CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
10206
10207     This patch fixes a missing vendor code in the flash_real_protect() function.
10208
10209     Signed-off-by: Nick Spence <nick.spence@freescale.com>
10210     Signed-off-by: Stefan Roese <sr@denx.de>
10211
10212 commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
10213 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10214 Date:   Tue Aug 19 16:53:39 2008 +0000
10215
10216     CFI: Fix AMD Legacy sector protect
10217
10218     New implement sector lock and unlock or softlock commands
10219     do not exist in AMD legacy flash. Thus, causing issue
10220     when erasing AMD legacy flash (such as lv040)
10221
10222     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10223     Signed-off-by: Stefan Roese <sr@denx.de>
10224
10225 commit 492671404140f09d5b21b3d2ce4e362c0692c069
10226 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10227 Date:   Wed Aug 20 09:40:16 2008 +0200
10228
10229     hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
10230
10231     CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
10232
10233     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10234
10235 commit 33eac2b3d946fc998a09245dfe54d017079b9056
10236 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10237 Date:   Wed Aug 20 09:28:36 2008 +0200
10238
10239     hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
10240
10241     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10242
10243 commit 25da0b84195fdda89a943b2d25757db5afeef5b8
10244 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10245 Date:   Wed Aug 20 09:27:37 2008 +0200
10246
10247     favr-32-ezkit: Fix printf format warnings
10248
10249     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10250
10251 commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
10252 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10253 Date:   Fri Aug 15 12:04:25 2008 +0200
10254
10255     MAINTAINERS: Sort avr32 section alphabetically
10256
10257     The rest of the MAINTAINERS file appears to be sorted
10258     almost-alphabetically, but entries for the newly added AVR32 boards were
10259     added somewhat randomly. This patch sorts the list alphabetically again.
10260
10261     Also update my e-mail address. The old one still works, but it may not
10262     work forever.
10263
10264     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10265
10266 commit 13b50fe3bc065c48911fa373231421280855a9d6
10267 Author: Mark Jackson <mpfj@mimc.co.uk>
10268 Date:   Wed Jul 30 13:07:27 2008 +0100
10269
10270     avr32: Add MIMC200 board
10271
10272     The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
10273     8MByte FLASH and 128KByte FRAM.
10274
10275     Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
10276     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10277
10278 commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
10279 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
10280 Date:   Wed Jul 9 21:07:34 2008 +0900
10281
10282     rtl8169: add support for RTL8110SCL
10283
10284     This patch fixes a problem that RTL8110SCL started transfer
10285     with an incorrect memory address.
10286
10287     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
10288     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10289
10290 commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
10291 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10292 Date:   Wed Jun 25 15:48:52 2008 -0500
10293
10294     Fix dm9000 receive status and len little endian issue
10295
10296     The received status and len was in little endian
10297     format and caused the ethernet unable to proceed
10298     further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
10299
10300     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10301     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10302
10303 commit fcd69a1a57fb2af4d26201422095a4be9f36963e
10304 Author: Kumar Gala <galak@kernel.crashing.org>
10305 Date:   Fri Aug 15 08:24:32 2008 -0500
10306
10307     Clean up usage of icache_disable/dcache_disable
10308
10309     There is no point in disabling the icache on 7xx/74xx/86xx parts and not
10310     also flushing the icache.  All callers of invalidate_l1_instruction_cache()
10311     call icache_disable() right after.  Make it so icache_disable() calls
10312     invalidate_l1_instruction_cache() for us.
10313
10314     Also, dcache_disable() already calls dcache_flush() so there is no point
10315     in the explicit calls of dcache_flush().
10316
10317     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10318
10319 commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
10320 Author: Kumar Gala <galak@kernel.crashing.org>
10321 Date:   Fri Aug 15 08:24:31 2008 -0500
10322
10323     Update linux bootm to support ePAPR client interface
10324
10325     The ePAPR spec has some subtle differences from the current device
10326     tree based boot interface to the powerpc linux kernel. The powerpc
10327     linux kernel currently ignores the differences that ePAPR specifies.
10328
10329     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10330
10331 commit b734e5556a239b3be5f9693b2f4b4b739683ec16
10332 Author: Wolfgang Denk <wd@denx.de>
10333 Date:   Mon Aug 18 23:50:20 2008 +0200
10334
10335     Minor code cleanup: keep lists sorted.
10336
10337     Signed-off-by: Wolfgang Denk <wd@denx.de>
10338
10339 commit d0039d4ed275e6ca09fb417895024ad02be118c4
10340 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
10341 Date:   Wed Jul 23 19:10:14 2008 +0200
10342
10343     Add support for ADT7460 I2C monitor chip
10344
10345     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
10346
10347 commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
10348 Author: Michal Simek <monstr@monstr.eu>
10349 Date:   Mon Jul 14 19:45:45 2008 +0200
10350
10351     video: Clean drivers/video/Makefile
10352
10353     Signed-off-by: Michal Simek <monstr@monstr.eu>
10354
10355 commit 871c18dd301752270e1f74328c846c3104be1e2e
10356 Author: Michal Simek <monstr@monstr.eu>
10357 Date:   Mon Jul 14 19:45:37 2008 +0200
10358
10359     rtc: Clean drivers/rtc/Makefile
10360
10361     Signed-off-by: Michal Simek <monstr@monstr.eu>
10362
10363 commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
10364 Author: Michal Simek <monstr@monstr.eu>
10365 Date:   Mon Jul 14 19:45:35 2008 +0200
10366
10367     i2c: Clean drivers/i2c/ Makefile
10368
10369     Signed-off-by: Michal Simek <monstr@monstr.eu>
10370
10371 commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
10372 Author: Harald Welte <laforge@openmoko.org>
10373 Date:   Wed Jul 9 22:30:30 2008 +0800
10374
10375     Add 'license' command to U-Boot command line
10376
10377     The 'license' command includes the U-Boot license (GPLv2) into the
10378     actual bootloader binary. The license text can be shown interactively
10379     at the U-Boot commandline.
10380
10381     For products where the commandline can actually be accessed by the
10382     end user, this helps to prevent inadvertent GPL violations, since the
10383     GPLv2 license text can no longer be 'forgotten' to be included into
10384     the product.
10385
10386     The 'license' command can be enabled by CONFIG_CMD_LICENSE.
10387
10388     Signed-off-by: Harald Welte <laforge@openmoko.org>
10389
10390 commit fe2ce5500ebf43d79d227190bd2370232d5b113d
10391 Author: Harald Welte <laforge@gnumonks.org>
10392 Date:   Sun Jul 6 15:56:38 2008 +0800
10393
10394     add 'unzip' command to u-boot commandline
10395
10396     [PATCH] add new 'unzip' command to u-boot commandline
10397
10398     common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
10399     memory to memory, and option CONFIG_CMD_UNZIP to enable it
10400
10401     Signed-off-by: Werner Almesberger <werner@openmoko.org>
10402     Signed-off-by: Harald Welte <laforge@openmoko.org>
10403
10404 commit 07efc9e321619c3dec213310c32e011aa6f02783
10405 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10406 Date:   Wed Aug 6 19:37:17 2008 -0500
10407
10408     Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
10409
10410     The CFG_ENV_SIZE is not suitable used for SPI flash erase
10411     sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
10412     Add condition check if CFG_ENV_SIZE is larger than
10413     CFG_ENV_SECT_SIZE, calculate the right number of sectors for
10414     erasing.
10415
10416     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10417
10418 commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
10419 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10420 Date:   Mon Aug 11 15:54:25 2008 +0000
10421
10422     ColdFire: Multiple fixes for M5282EVB
10423
10424     Incorrect CFG_HZ value, change 1000000 to 1000.
10425     Rename #waring to #warning. RAMBAR1 uses twice
10426     in start.S, rename the later to FLASHBAR. Insert
10427     nop for DRAM setup. And, env_offset in linker file.
10428
10429     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10430
10431 commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
10432 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10433 Date:   Mon Aug 11 15:26:43 2008 +0000
10434
10435     ColdFire: Move m5282evb from board to board/freescale
10436
10437     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10438
10439 commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
10440 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10441 Date:   Mon Aug 11 15:25:07 2008 +0000
10442
10443     ColdFire: Move m5272c3 from board to board/freescale
10444
10445     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10446
10447 commit 659e9bad629a480f606b286d5703aef7159edf98
10448 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10449 Date:   Mon Aug 11 15:23:16 2008 +0000
10450
10451     ColdFire: Move m5271evb from board to board/freescale
10452
10453     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10454
10455 commit 05316f8ece8206339a208ec052f039cd0f7ca922
10456 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10457 Date:   Mon Aug 11 13:41:49 2008 +0000
10458
10459     ColdFire: Add M54451EVB platform support for MCF5445x
10460
10461     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10462
10463 commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
10464 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10465 Date:   Wed Aug 6 19:14:08 2008 -0500
10466
10467     ColdFire: Add Serial Flash support for M54455EVB
10468
10469     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10470
10471 commit 9f751551456828b2d0ff417f10959fb0c7110bd0
10472 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10473 Date:   Wed Jul 23 20:38:53 2008 -0500
10474
10475     ColdFire: Implement SBF feature for M5445EVB
10476
10477     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10478
10479 commit a7323bba229203aae2604afde131ab47bad4eadc
10480 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10481 Date:   Wed Jul 23 17:53:36 2008 -0500
10482
10483     ColdFire: Add SSPI feature for MCF5445x
10484
10485     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10486
10487 commit b2d022d1ac3f59bffa9cec249341e77aea168abc
10488 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10489 Date:   Wed Jul 23 17:37:10 2008 -0500
10490
10491     ColdFire: Use CFI Flash driver for M54455EVB
10492
10493     Remove non-common flash driver in
10494     board/freescale/m54455evb/flash.c. The non-cfi flash will
10495     use CONFIG_FLASH_CFI_LEGACY to configure the flash
10496     attribute.
10497
10498     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10499
10500 commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
10501 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10502 Date:   Wed Jul 23 17:11:47 2008 -0500
10503
10504     ColdFire: Add M5253DEMO platform support for MCF5253
10505
10506     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10507
10508 commit 80ba61fd82569af40e04d4a089257b81881884f2
10509 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10510 Date:   Wed Aug 6 14:17:09 2008 -0500
10511
10512     ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
10513
10514     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10515
10516 commit d361307e73ce1f6fc68760123f37d4876f851f3e
10517 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10518 Date:   Wed Aug 6 14:11:36 2008 -0500
10519
10520     ColdFire: Fix M5253EVB dram bring up issue
10521
10522     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10523
10524 commit 4b0708093e15b412296328bf81325cf9b69fe512
10525 Author: Wolfgang Denk <wd@denx.de>
10526 Date:   Thu Aug 14 14:41:06 2008 +0200
10527
10528     Coding Style cleanup, update CHANGELOG
10529
10530     Signed-off-by: Wolfgang Denk <wd@denx.de>
10531
10532 commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
10533 Author: Scott Wood <scottwood@freescale.com>
10534 Date:   Wed Aug 13 18:24:05 2008 -0500
10535
10536     socrates: Update NAND driver to new API.
10537
10538     Also, fix some minor formatting issues, and simplify the handling of
10539     "state" for writes.
10540
10541     Signed-off-by: Scott Wood <scottwood@freescale.com>
10542
10543 commit ba22d10f39eaeedd035e8265616e31ff88e314d5
10544 Author: Scott Wood <scottwood@freescale.com>
10545 Date:   Wed Aug 13 18:03:40 2008 -0500
10546
10547     quad100hd: Update NAND driver to new API.
10548
10549     Signed-off-by: Scott Wood <scottwood@freescale.com>
10550
10551 commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
10552 Author: Scott Wood <scottwood@freescale.com>
10553 Date:   Wed Aug 13 17:53:48 2008 -0500
10554
10555     m5373evb: Update NAND driver to new API.
10556
10557     Signed-off-by: Scott Wood <scottwood@freescale.com>
10558
10559 commit 1a23a197c8722b805f40895544bbdb1a648c1c82
10560 Author: Scott Wood <scottwood@freescale.com>
10561 Date:   Wed Aug 13 17:04:30 2008 -0500
10562
10563     s3c24x0: Update NAND driver to new API.
10564
10565     Signed-off-by: Scott Wood <scottwood@freescale.com>
10566
10567 commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
10568 Author: Scott Wood <scottwood@freescale.com>
10569 Date:   Wed Aug 13 15:56:00 2008 -0500
10570
10571     at91: Update board NAND drivers to current API.
10572
10573     Signed-off-by: Scott Wood <scottwood@freescale.com>
10574
10575 commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
10576 Author: Kyungmin Park <kmpark@infradead.org>
10577 Date:   Wed Aug 13 09:11:02 2008 +0900
10578
10579     Fix OneNAND build break
10580
10581     Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
10582     - fix bufferram management at erase operation
10583     This patch includes the NAND/OneNAND state filed too.
10584
10585     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
10586     Signed-off-by: Scott Wood <scottwood@freescale.com>
10587
10588 commit 9483df6408c25f16060432de3868901e352e23bc
10589 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10590 Date:   Wed Aug 13 01:40:43 2008 +0200
10591
10592     drivers/mtd/nand_legacy: Move conditional compilation to Makefile
10593
10594     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10595
10596 commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
10597 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10598 Date:   Wed Aug 13 01:40:43 2008 +0200
10599
10600     drivers/mtd/nand: Move conditional compilation to Makefile
10601
10602     rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
10603
10604     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10605
10606 commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
10607 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10608 Date:   Wed Aug 13 01:40:42 2008 +0200
10609
10610     drivers/mtd/onenand: Move conditional compilation to Makefile
10611
10612     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10613
10614 commit 00b1883a4cac59d97cd297b1a3a398db85982865
10615 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10616 Date:   Wed Aug 13 01:40:42 2008 +0200
10617
10618     drivers/mtd: Move conditional compilation to Makefile
10619
10620     rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
10621
10622     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10623
10624 commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
10625 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10626 Date:   Wed Aug 13 01:40:41 2008 +0200
10627
10628     drivers/qe: Move conditional compilation to Makefile
10629
10630     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10631
10632 commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
10633 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10634 Date:   Wed Aug 13 01:40:40 2008 +0200
10635
10636     drivers/pci: Move conditional compilation to Makefile
10637
10638     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10639
10640 commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
10641 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10642 Date:   Wed Aug 13 01:40:40 2008 +0200
10643
10644     drivers/misc: Move conditional compilation to Makefile
10645
10646     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10647
10648 commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
10649 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10650 Date:   Wed Aug 13 01:40:40 2008 +0200
10651
10652     drivers/input: Move conditional compilation to Makefile
10653
10654     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10655
10656 commit 88f57e093114a44aa9a858d52b099bcc52034a8c
10657 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10658 Date:   Wed Aug 13 01:40:39 2008 +0200
10659
10660     drivers/dma: Move conditional compilation to Makefile
10661
10662     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10663
10664 commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
10665 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10666 Date:   Wed Aug 13 01:40:39 2008 +0200
10667
10668     drivers/block: Move conditional compilation to Makefile
10669
10670     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10671
10672 commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
10673 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10674 Date:   Wed Aug 13 01:40:39 2008 +0200
10675
10676     serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
10677
10678     move also conditional compilation to Makefile
10679
10680     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10681
10682 commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
10683 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10684 Date:   Wed Aug 13 01:40:38 2008 +0200
10685
10686     serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
10687
10688     move also conditional compilation to Makefile
10689
10690     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10691
10692 commit d6e9ee92e890f67594ab150689510df361133ead
10693 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10694 Date:   Wed Aug 13 01:40:38 2008 +0200
10695
10696     common: Move conditional compilation to Makefile
10697
10698     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10699
10700 commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
10701 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10702 Date:   Wed Aug 13 01:40:09 2008 +0200
10703
10704     mx31: move freescale's mx31 boards to vendor board dir
10705
10706     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10707
10708 commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
10709 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10710 Date:   Sat Jul 5 23:11:11 2008 +0200
10711
10712     at91: move arch-at91sam9 to arch-at91
10713
10714     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10715
10716 commit 195ccfc5991d48764b2519941e3507f693851d5d
10717 Author: Fathi BOUDRA <fabo@debian.org>
10718 Date:   Wed Aug 6 10:06:20 2008 +0200
10719
10720     OneNAND: Fill in MTD function pointers for OneNAND.
10721
10722     onenand_print_device_info():
10723      - Now returns a string to be placed in mtd->name,
10724        rather than calling printf.
10725      - Remove verbose parameter as it becomes useless.
10726
10727     Signed-off-by: Fathi Boudra <fabo@debian.org>
10728     Signed-off-by: Scott Wood <scottwood@freescale.com>
10729
10730 commit aa646643b6bc250cb3a4966bf728876e0c10d329
10731 Author: Guennadi Liakhovetski <lg@denx.de>
10732 Date:   Wed Aug 6 21:42:07 2008 +0200
10733
10734     nand_spl: Support page-aligned read in nand_load, use chipselect
10735
10736     Supporting page-aligned reads doesn't incure any sinificant overhead, just
10737     a small change in the algorithm. Also replace in_8 with readb, since there
10738     is no in_8 on ARM.
10739
10740     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
10741     Signed-off-by: Scott Wood <scottwood@freescale.com>
10742
10743 commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
10744 Author: Scott Wood <scottwood@freescale.com>
10745 Date:   Tue Aug 5 11:15:59 2008 -0500
10746
10747     NAND boot: Update large page support for current API.
10748
10749     Also, remove the ctrl variable in favor of passing the constants
10750     directly, and remove redundant (u8) casts.
10751
10752     Signed-off-by: Scott Wood <scottwood@freescale.com>
10753
10754 commit e4c09508545d1c45617ba45391c03c03cbc360b9
10755 Author: Scott Wood <scottwood@freescale.com>
10756 Date:   Mon Jun 30 14:13:28 2008 -0500
10757
10758     NAND boot: MPC8313ERDB support
10759
10760     Note that with older board revisions, NAND boot may only work after a
10761     power-on reset, and not after a warm reset.  I don't have a newer board
10762     to test on; if you have a board with a 33MHz crystal, please let me know
10763     if it works after a warm reset.
10764
10765     Signed-off-by: Scott Wood <scottwood@freescale.com>
10766
10767 commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
10768 Author: Scott Wood <scottwood@freescale.com>
10769 Date:   Thu Jun 26 14:06:52 2008 -0500
10770
10771     mpc8313erdb: Enable NAND in config.
10772
10773     Signed-off-by: Scott Wood <scottwood@freescale.com>
10774
10775 commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
10776 Author: Guennadi Liakhovetski <lg@denx.de>
10777 Date:   Thu Jul 31 12:38:26 2008 +0200
10778
10779     NAND: Do not write or read a whole block if it is larger than the environment
10780
10781     Environment can be smaller than NAND block size, do not need to read a whole
10782     block and minimum for writing is one page. Also remove an unused variable.
10783
10784     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
10785     Signed-off-by: Scott Wood <scottwood@freescale.com>
10786
10787 commit eafcabd15f00c142156235c519fcc55b10993241
10788 Author: Marcel Ziswiler <marcel@ziswiler.com>
10789 Date:   Sun Jun 22 16:30:06 2008 +0200
10790
10791     NAND: chip->state does not always get set.
10792
10793     Fixes an issue with chip->state not always being set causing troubles.
10794
10795     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
10796     Signed-off-by: Scott Wood <scottwood@freescale.com>
10797
10798 commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
10799 Author: Ilya Yanok <yanok@emcraft.com>
10800 Date:   Mon Jun 30 15:34:40 2008 +0200
10801
10802     NAND: Scan bad blocks lazily.
10803
10804     Rather than scanning on boot, scan upon the first attempt to check the
10805     badness of a block.  This speeds up boot when not using NAND, and reduces
10806     the likelihood of needing to reflash via JTAG if NAND becomes
10807     nonfunctional.
10808
10809     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
10810     Signed-off-by: Scott Wood <scottwood@freescale.com>
10811
10812 commit dfbf617ff055e4216f78d358b0867c548916d14b
10813 Author: Scott Wood <scottwood@freescale.com>
10814 Date:   Thu Jun 12 13:20:16 2008 -0500
10815
10816     NAND read/write fix
10817
10818     Implement block-skipping read/write, based on a patch from
10819     Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
10820
10821     Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
10822     Signed-off-by: Scott Wood <scottwood@freescale.com>
10823
10824 commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
10825 Author: Scott Wood <scottwood@freescale.com>
10826 Date:   Thu Jun 12 13:13:23 2008 -0500
10827
10828     NAND: Always skip blocks on read/write/boot.
10829
10830     Use of the non-skipping versions was almost always (if not always)
10831     an error, and no valid use case has been identified.
10832
10833     Signed-off-by: Scott Wood <scottwood@freescale.com>
10834
10835 commit e1c3dbada349992875934575c97b328ab2cb33ca
10836 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10837 Date:   Thu Jun 12 11:10:21 2008 -0500
10838
10839     nand: fsl_upm: convert to updated MTD NAND infrastructure
10840
10841     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10842     Signed-off-by: Scott Wood <scottwood@freescale.com>
10843
10844 commit 300253306acc72b1b2e9faf0987f86551151d7cf
10845 Author: Scott Wood <scottwood@freescale.com>
10846 Date:   Thu May 22 15:02:46 2008 -0500
10847
10848     fsl_elbc_nand: Hard-code the FBAR/FPAR split.
10849
10850     The hardware has separate registers for block and page-within-block,
10851     but the division between the two has no apparent relation to the
10852     actual erase block size of the NAND chip.
10853
10854     Signed-off-by: Scott Wood <scottwood@freescale.com>
10855
10856 commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
10857 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10858 Date:   Fri Mar 28 22:10:54 2008 +0300
10859
10860     fsl_elbc_nand: workaround for hangs during nand write
10861
10862     Using current driver elbc sometimes hangs during nand write. Reading back
10863     last byte helps though (thanks to Scott Wood for the idea).
10864
10865     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10866     Signed-off-by: Scott Wood <scottwood@freescale.com>
10867
10868 commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
10869 Author: Scott Wood <scottwood@freescale.com>
10870 Date:   Fri Mar 21 16:12:51 2008 -0500
10871
10872     Freescale eLBC FCM NAND driver
10873
10874     This is a driver for the Flash Control Machine of the enhanched Local Bus
10875     Controller found on some Freescale chips (such as the mpc8313 and the
10876     mpc8379).
10877
10878     Signed-off-by: Scott Wood <scottwood@freescale.com>
10879
10880 commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
10881 Author: Scott Wood <scottwood@freescale.com>
10882 Date:   Tue Mar 18 15:29:14 2008 -0500
10883
10884     Don't panic if a controller driver does ecc its own way.
10885
10886     Some hardware, such as the enhanced local bus controller used on some
10887     mpc83xx chips, does ecc transparently when reading and writing data, rather
10888     than providing a generic calculate/correct mechanism that can be exported to
10889     the nand subsystem.
10890
10891     The subsystem should not BUG() when calculate, correct, or hwctl are
10892     missing, if the methods that call them have been overridden.
10893
10894     Signed-off-by: Scott Wood <scottwood@freescale.com>
10895
10896 commit e52b34d40a8a646e3d11638ea8797e96398dba13
10897 Author: Stefan Roese <sr@denx.de>
10898 Date:   Thu Jan 10 18:47:33 2008 +0100
10899
10900     NAND: Make NAND driver less verbose per default
10901
10902     This patch turns off printing of bad blocks per default upon bootup.
10903     This can always be shown via the "nand bad" command later.
10904
10905     Signed-off-by: Stefan Roese <sr@denx.de>
10906
10907 commit fe56a2772e5c59577df906163d0d4b29b056140e
10908 Author: Sergey Kubushyn <ksi@koi8.net>
10909 Date:   Wed Jan 9 15:36:20 2008 +0100
10910
10911     NAND: Davinci driver updates
10912
10913     Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
10914     don't have hardware handy so I can not test it at the moment but changes are
10915     rather trivial so it should work. It would be nice if somebody with a
10916     hardware checked it anyways.
10917
10918     Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
10919
10920 commit deac913effd8d80535c9ff4687b6fcdff540c554
10921 Author: Stefan Roese <sr@denx.de>
10922 Date:   Sat Jan 5 16:50:32 2008 +0100
10923
10924     NAND: Fix compilation warning and small coding style issue
10925
10926     Signed-off-by: Stefan Roese <sr@denx.de>
10927
10928 commit c568f77acdf896fc3dd6413ce53205b17ba809a3
10929 Author: Stefan Roese <sr@denx.de>
10930 Date:   Sat Jan 5 16:49:37 2008 +0100
10931
10932     NAND: Update nand_spl driver to match updated nand subsystem
10933
10934     This patch changes the NAND booting driver nand_spl/nand_boot.c to match
10935     the new infrastructure from the updated NAND subsystem. This NAND
10936     subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
10937     subsystem.
10938
10939     Signed-off-by: Stefan Roese <sr@denx.de>
10940
10941 commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
10942 Author: Stefan Roese <sr@denx.de>
10943 Date:   Sat Jan 5 16:47:58 2008 +0100
10944
10945     NAND: Update 4xx NDFC driver to match updated nand subsystem
10946
10947     This patch changes the 4xx NAND driver ndfc.c to match the new
10948     infrastructure from the updated NAND subsystem. This NAND
10949     subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
10950     subsystem.
10951
10952     Tested successfully on AMCC Sequoia and Bamboo.
10953
10954     Signed-off-by: Stefan Roese <sr@denx.de>
10955
10956 commit 12072264528eba33737bc9674e19f0e925ffda23
10957 Author: Stefan Roese <sr@denx.de>
10958 Date:   Sat Jan 5 16:43:25 2008 +0100
10959
10960     NAND: Change nand_wait_ready() to not call nand_wait()
10961
10962     This patch changes nand_wait_ready() to not just call nand_wait(),
10963     since this will send a new command to the NAND chip. We just want to
10964     wait for the chip to become ready here.
10965
10966     Signed-off-by: Stefan Roese <sr@denx.de>
10967
10968 commit 9ad754fef5053144daed3b007adaf1c9bec654c9
10969 Author: William Juul <william.juul@datarespons.no>
10970 Date:   Fri Dec 14 16:33:45 2007 +0100
10971
10972     make nand dump and nand dump.oob work
10973
10974     Signed-off-by: William Juul <william.juul@tandberg.com>
10975     Signed-off-by: Scott Wood <scottwood@freescale.com>
10976
10977 commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
10978 Author: William Juul <william.juul@datarespons.no>
10979 Date:   Mon Nov 19 14:46:00 2007 +0100
10980
10981     moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
10982
10983     Signed-off-by: William Juul <william.juul@tandberg.com>
10984
10985 commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
10986 Author: William Juul <william.juul@tandberg.com>
10987 Date:   Tue Jun 10 16:18:13 2008 -0500
10988
10989     Clean out unneeded files
10990
10991     Signed-off-by: William Juul <william.juul@tandberg.com>
10992
10993 commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
10994 Author: William Juul <william.juul@datarespons.no>
10995 Date:   Fri Nov 16 08:44:27 2007 +0100
10996
10997     Create symlinks from yaffs2/direct to yaffs2
10998
10999     Signed-off-by: William Juul <william.juul@tandberg.com>
11000
11001 commit 90ef117b68387d66763291af0117677644166611
11002 Author: William Juul <william.juul@datarespons.no>
11003 Date:   Thu Nov 15 12:23:57 2007 +0100
11004
11005     Incorporate yaffs2 into U-boot
11006
11007     To use YAFFS2 define CONFIG_YAFFS2
11008
11009     Signed-off-by: William Juul <william.juul@tandberg.com>
11010     Signed-off-by: Scott Wood <scottwood@freescale.com>
11011
11012 commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
11013 Author: William Juul <william.juul@datarespons.no>
11014 Date:   Thu Nov 15 11:13:05 2007 +0100
11015
11016     YAFFS2 import
11017
11018     Direct import of yaffs as a tarball as of 20071113 from their public
11019     CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
11020
11021     The code can also be imported on the command line with:
11022     export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
11023     (Hit return when asked for a password)
11024     cvs checkout yaffs2
11025
11026     Signed-off-by: William Juul <william.juul@tandberg.com>
11027     Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
11028
11029 commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
11030 Author: William Juul <william.juul@datarespons.no>
11031 Date:   Wed Nov 14 14:28:11 2007 +0100
11032
11033     Whitespace cleanup and marking broken code.
11034
11035     Changes requested by maintainer Stefan Roese after
11036     posting patch to U-boot mailing list.
11037
11038     Signed-off-by: William Juul <william.juul@tandberg.com>
11039     Signed-off-by: Scott Wood <scottwood@freescale.com>
11040
11041 commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
11042 Author: William Juul <william.juul@datarespons.no>
11043 Date:   Fri Nov 9 13:32:30 2007 +0100
11044
11045     Fixing coding style issues
11046
11047      - Fixing leading white spaces
11048      - Fixing indentation where 4 spaces are used instead of tab
11049      - Removing C++ comments (//), wherever I introduced them
11050
11051     Signed-off-by: William Juul <william.juul@tandberg.com>
11052     Signed-off-by: Scott Wood <scottwood@freescale.com>
11053
11054 commit 4cbb651b29cb64d378a06729970e1e153bb605b1
11055 Author: William Juul <william.juul@datarespons.no>
11056 Date:   Thu Nov 8 10:39:53 2007 +0100
11057
11058     Remove white space at end.
11059
11060     Signed-off-by: William Juul <william.juul@tandberg.com>
11061     Signed-off-by: Scott Wood <scottwood@freescale.com>
11062
11063 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
11064 Author: William Juul <william.juul@datarespons.no>
11065 Date:   Wed Oct 31 13:53:06 2007 +0100
11066
11067     Update MTD to that of Linux 2.6.22.1
11068
11069     A lot changed in the Linux MTD code, since it was last ported from
11070     Linux to U-Boot. This patch takes U-Boot NAND support to the level
11071     of Linux 2.6.22.1 and will enable support for very large NAND devices
11072     (4KB pages) and ease the compatibility between U-Boot and Linux
11073     filesystems.
11074
11075     This patch is tested on two custom boards with PPC and ARM
11076     processors running YAFFS in U-Boot and Linux using gcc-4.1.2
11077     cross compilers.
11078
11079     MAKEALL ppc/arm has some issues:
11080      * DOC/OneNand/nand_spl is not building (I have not tried porting
11081        these parts, and since I do not have any HW and I am not familiar
11082        with this code/HW I think its best left to someone else.)
11083
11084     Except for the issues mentioned above, I have ported all drivers
11085     necessary to run MAKEALL ppc/arm without errors and warnings. Many
11086     drivers were trivial to port, but some were not so trivial. The
11087     following drivers must be examined carefully and maybe rewritten to
11088     some degree:
11089      cpu/ppc4xx/ndfc.c
11090      cpu/arm926ejs/davinci/nand.c
11091      board/delta/nand.c
11092      board/zylonite/nand.c
11093
11094     Signed-off-by: William Juul <william.juul@tandberg.com>
11095     Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
11096     Signed-off-by: Scott Wood <scottwood@freescale.com>
11097
11098 commit cd82919e6c8a73b363a26f34b734923844e52d1c
11099 Author: Wolfgang Denk <wd@denx.de>
11100 Date:   Tue Aug 12 16:08:38 2008 +0200
11101
11102     Coding style cleanup, update CHANGELOG, prepare release
11103
11104     Signed-off-by: Wolfgang Denk <wd@denx.de>
11105
11106 commit 17e900b8c0f38d922da47073246219dce2a847f2
11107 Author: Wolfgang Denk <wd@denx.de>
11108 Date:   Tue Aug 12 14:54:04 2008 +0200
11109
11110     MVBC_P: fix compile problem
11111
11112     Signed-off-by: Wolfgang Denk <wd@denx.de>
11113
11114 commit 52b047ae48219b59bebe37ba743ab103fd4f8316
11115 Author: Wolfgang Denk <wd@denx.de>
11116 Date:   Tue Aug 12 12:10:11 2008 +0200
11117
11118     MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
11119
11120     Signed-off-by: Wolfgang Denk <wd@denx.de>
11121
11122 commit c9c101c660b3d1995045c61c7c6041f52b6cf335
11123 Author: Wolfgang Denk <wd@denx.de>
11124 Date:   Tue Aug 12 00:36:53 2008 +0200
11125
11126     ads5121: fix compiler warnings (unused variables)
11127
11128     Signed-off-by: Wolfgang Denk <wd@denx.de>
11129
11130 commit 902ca09246039964d59bbcb519b1e1b5aed01308
11131 Author: Kumar Gala <galak@kernel.crashing.org>
11132 Date:   Mon Aug 11 11:29:28 2008 -0500
11133
11134     85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
11135
11136     Use CONFIG_NUM_CPUS to match existing define used by 86xx.
11137
11138     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11139     Acked-by: Jon Loeliger <jdl@freescale.com>
11140
11141 commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
11142 Author: Kumar Gala <galak@kernel.crashing.org>
11143 Date:   Mon Aug 11 09:20:53 2008 -0500
11144
11145     Fix fallout from autostart revert
11146
11147     The autostart revert caused a bit of duplicated code as well as
11148     code that was using images->autostart that needs to get removed so
11149     we can build again.
11150
11151     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11152
11153 commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
11154 Author: Kumar Gala <galak@kernel.crashing.org>
11155 Date:   Mon Aug 11 09:16:25 2008 -0500
11156
11157     Fix compile error related to r8a66597-hcd & usb
11158
11159     When building the 8544DS board we get this error:
11160
11161     In file included from r8a66597-hcd.c:22:
11162     u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
11163     make[1]: *** [r8a66597-hcd.o] Error 1
11164
11165     The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
11166     is set.
11167
11168     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11169
11170 commit 2d0daa03612338a813e3c9d22680e54eabfea378
11171 Author: Becky Bruce <becky.bruce@freescale.com>
11172 Date:   Mon Aug 4 14:02:26 2008 -0500
11173
11174     POWERPC 86xx: Move BAT setup code to C
11175
11176     This is needed because we will be possibly be locating
11177     devices at physical addresses above 32bits, and the asm
11178     preprocessing does not appear to deal with ULL constants
11179     properly. We now call write_bat in lib_ppc/bat_rw.c.
11180
11181     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11182     Acked-by: Jon Loeliger <jdl@freescale.com>
11183
11184 commit 9de67149db576c91b9c2a0a182652331e7e44211
11185 Author: Becky Bruce <becky.bruce@freescale.com>
11186 Date:   Mon Aug 4 14:01:53 2008 -0500
11187
11188     POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
11189
11190     Perform sync/isync as required by the architecture.
11191
11192     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11193     Acked-by: Jon Loeliger <jdl@freescale.com>
11194
11195 commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
11196 Author: Becky Bruce <becky.bruce@freescale.com>
11197 Date:   Mon Aug 4 14:01:16 2008 -0500
11198
11199     POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
11200
11201     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11202     Acked-by: Jon Loeliger <jdl@freescale.com>
11203
11204 commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
11205 Author: Magnus Lilja <lilja.magnus@gmail.com>
11206 Date:   Sun Aug 3 21:44:10 2008 +0200
11207
11208     i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
11209
11210     Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
11211     contacts instead of only the first 256 ones as is the case prior to
11212     this patch.
11213
11214     Add missing MUX_* macros and update board files to use the new macros.
11215
11216     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
11217
11218 commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
11219 Author: Magnus Lilja <lilja.magnus@gmail.com>
11220 Date:   Sun Aug 3 21:43:37 2008 +0200
11221
11222     i.MX31: Fix IOMUX related typos
11223
11224     Correct the names of some IOMUX macros.
11225
11226     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
11227
11228 commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
11229 Author: Steve Sakoman <steve@sakoman.com>
11230 Date:   Mon Aug 11 20:26:16 2008 +0200
11231
11232     OneNAND: Remove unused parameters to onenand_verify_page
11233
11234     The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
11235
11236     Signed-off-by: Steve Sakoman <steve@sakoman.com>
11237     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
11238
11239 commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
11240 Author: Anatolij Gustschin <agust@denx.de>
11241 Date:   Fri Aug 8 18:00:40 2008 +0200
11242
11243     video: fix bug in cfb_console code
11244
11245     FILL_15BIT_555RGB macro extension for pixel swapping
11246     by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
11247     introduced a bug in cfb_console:
11248
11249     Bitmaps with odd-numbered width won't be rendered
11250     correctly and even U-Boot crashes are observed on
11251     some platforms while repeated rendering of such
11252     bitmaps with "bmp display". Also if a bitmap is
11253     rendered to an odd-numbered x starting position,
11254     the same problem occurs. This patch is an attempt
11255     to fix it.
11256
11257     Signed-off-by: Anatolij Gustschin <agust@denx.de>
11258
11259 commit d9015f6a50d7258125349ef5c2af836458a0029a
11260 Author: Anatolij Gustschin <agust@denx.de>
11261 Date:   Fri Aug 8 18:00:39 2008 +0200
11262
11263     video: fix bug in logo_plot
11264
11265     If logo_plot() should ever be called with x starting
11266     position other than zero and for pixel depths greater
11267     than 8bpp, logo colors distortion will be observed.
11268     This patch fixes the issue.
11269
11270     Signed-off-by: Anatolij Gustschin <agust@denx.de>
11271
11272 commit 406819ae94f79f5b59e01d163380ca7d83709251
11273 Author: Wolfgang Denk <wd@denx.de>
11274 Date:   Mon Aug 11 00:17:52 2008 +0200
11275
11276     MAINTAINERS: sort entries
11277
11278     Signed-off-by: Wolfgang Denk <wd@denx.de>
11279
11280 commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
11281 Author: Roy Zang <tie-fei.zang@freescale.com>
11282 Date:   Thu Aug 7 18:19:28 2008 +0800
11283
11284     Add mpc7448hpc2 maintainer information
11285
11286     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
11287
11288 commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
11289 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
11290 Date:   Thu Aug 7 13:13:27 2008 +0530
11291
11292     common/cmd_load.c - Minor code & Coding Style cleanup
11293
11294     - os_data_header Variable is a carry over feature
11295        & unused. So removed all instance of this variable
11296      - Minor Code Style Update
11297
11298     Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
11299     Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11300
11301 commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
11302 Author: Magnus Lilja <lilja.magnus@gmail.com>
11303 Date:   Wed Aug 6 19:32:33 2008 +0200
11304
11305     Update the U-Boot wiki URL.
11306
11307     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
11308
11309 commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
11310 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
11311 Date:   Sun Aug 10 17:56:36 2008 +0200
11312
11313     OneNAND: Remove base address offset usage
11314
11315     While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
11316     using OneNAND and some using NAND, we found some differences in OneNAND and
11317     NAND command address handling.
11318
11319     As this might confuse users (it already confused us), we like to align OneNAND
11320     and NAND address handling.
11321
11322     The issue is that cmd_onenand.c subtracts the onenand base address from the
11323     addresses you type into the u-boot command line so, unlike nand, you can't
11324     use addresses relative to the start of the onenand part e.g. this won't work:
11325
11326     onenand read 82000000 280000 400000
11327
11328     you have to use:
11329
11330     onenand read 82000000 20280000 400000
11331
11332     Looking at recent git, the only board currently using OneNAND is Apollon, and
11333     for this the OneNAND base address is 0 (apollon.h)
11334
11335     #define     CFG_ONENAND_BASE        0x00000000
11336
11337     so patch below won't break any existing boards and will align OneNAND and NAND
11338     handling on boards where OneNAND base address is != 0.
11339
11340     Signed-off-by: Steve Sakoman <sakoman@gmail.com>
11341     Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
11342     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
11343
11344 commit c11528083ef6e55e76df742228c26e39d151813d
11345 Author: Kumar Gala <galak@kernel.crashing.org>
11346 Date:   Thu Aug 7 09:28:20 2008 -0500
11347
11348     mpc85xx: workaround old binutils bug
11349
11350     The recent change to move the .bss outside of the image gives older
11351     binutils (ld from eldk4.1/binutils-2.16) some headache:
11352
11353     ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
11354     ppc_85xx-ld: final link failed: Bad value
11355
11356     We workaround it by being explicit about the program headers and not
11357     assigning the .bss to a program header.
11358
11359     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11360
11361 commit 0bf202ec586d4466c900e987720fa635c594d689
11362 Author: Wolfgang Denk <wd@denx.de>
11363 Date:   Sun Aug 10 01:26:26 2008 +0200
11364
11365     Revert "[new uImage] Add autostart flag to bootm_headers structure"
11366
11367     This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
11368
11369     The commit was based on a misunderstanding of the (documented)
11370     meaning of the 'autostart' environment variable. It might cause
11371     boards to hang if 'autostart' was used, with the potential to brick
11372     them. Go back to the documented behaviour.
11373
11374     Conflicts:
11375
11376         common/cmd_bootm.c
11377         common/image.c
11378         include/image.h
11379
11380     Signed-off-by: Wolfgang Denk <wd@denx.de>
11381
11382 commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
11383 Author: Wolfgang Denk <wd@denx.de>
11384 Date:   Sat Aug 9 23:17:32 2008 +0200
11385
11386     TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
11387
11388     - enable CFI driver where this was forgotten
11389     - enable mtdparts support
11390     - adjust default environment
11391     etc.
11392
11393     Signed-off-by: Wolfgang Denk <wd@denx.de>
11394
11395 commit 41266c9b5a5f873df3ec891bb0907616958b5602
11396 Author: Peter Tyser <ptyser@xes-inc.com>
11397 Date:   Tue Aug 5 10:51:57 2008 -0500
11398
11399     FIT: Fix handling of images without ramdisks
11400
11401     boot_get_ramdisk() should not treat the case when a FIT image does
11402     not contain a ramdisk as an error.
11403
11404     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11405     Acked-by: Michal Simek <monstr@monstr.eu>
11406
11407 commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
11408 Author: Sergey Lapin <slapin@ossfans.org>
11409 Date:   Sat Aug 9 01:39:09 2008 +0400
11410
11411     DataFlash: AT45DB021 fix and AT45DB081 support
11412
11413     Fix for page size of AT45DB021. Also adding bigger AT45DB081
11414     which comes with some newer boards.
11415
11416     Signed-off-by: Sergey Lapin <slapin@ossfans.org>
11417
11418 commit ba9324451b662dd393afa53e5cc36fc5d3d10966
11419 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11420 Date:   Fri Aug 8 16:30:23 2008 +0900
11421
11422     sh: Update sh7763rdp config
11423
11424     Add sh_eth support to sh7763rdp.
11425
11426     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11427
11428 commit 21f971ec265f6042ec21636d55d06a6bc0751077
11429 Author: Wolfgang Denk <wd@denx.de>
11430 Date:   Mon Jul 7 01:22:29 2008 +0200
11431
11432     TQM823L: re-enable logo support; update LCD_INFO text
11433
11434     Signed-off-by: Wolfgang Denk <wd@denx.de>
11435
11436 commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
11437 Author: Wolfgang Denk <wd@denx.de>
11438 Date:   Fri Aug 8 16:41:56 2008 +0200
11439
11440     TQM8xxL: fix support for second flash bank
11441
11442     When switching the TQM8xxL modules to use the CFI flash driver,
11443     support for the second flash bank was broken because the CFI driver
11444     did not support dynamically sized banks. This gets fixed now.
11445
11446     Signed-off-by: Wolfgang Denk <wd@denx.de>
11447
11448 commit 2a112b234d879f6390503a5f4e38246acce9d0b0
11449 Author: Wolfgang Denk <wd@denx.de>
11450 Date:   Fri Aug 8 16:39:54 2008 +0200
11451
11452     CFI: allow for dynamically determined flash sizes and addresses
11453
11454     The CFI driver allowed only for static initializers in the
11455     CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
11456     several flash banks contiguously if the bank sizes were not known in
11457     advance, which kind of violates U-Boot's design philosophy.
11458
11459     (will be used for example by the TQM8xxL boards)
11460
11461     Signed-off-by: Wolfgang Denk <wd@denx.de>
11462
11463 commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
11464 Author: Ben Warren <biggerbadderben@gmail.com>
11465 Date:   Thu Aug 7 23:26:35 2008 -0700
11466
11467     QE UEC: Fix compiler warnings
11468
11469     Moved static functions earlier in file so forward declarations are not needed.
11470
11471     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11472
11473 commit d5d28fe4aad5f4535400647a5617c11039506467
11474 Author: David Saada <David.Saada@ecitele.com>
11475 Date:   Mon Mar 31 02:37:38 2008 -0700
11476
11477     QE UEC: Add MII Commands
11478
11479     Add MII commands to the UEC driver. Note that once a UEC device is selected,
11480     any device on its MDIO bus can be addressed.
11481
11482     Signed-off-by: David Saada <david.saada@ecitele.com>
11483     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11484
11485 commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
11486 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
11487 Date:   Wed Jul 9 21:07:38 2008 +0900
11488
11489     usb: add support for R8A66597 usb controller
11490
11491     add support for Renesas R8A66597 usb controller.
11492     This patch supports USB Host mode.
11493
11494     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
11495     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11496
11497 commit 1d10dcd041aaeae9fd7c821005692898a0303382
11498 Author: Hunter, Jon <jon-hunter@ti.com>
11499 Date:   Sat Jul 26 18:59:16 2008 -0500
11500
11501     Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
11502
11503     Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
11504
11505     Signed-off-by: Jon Hunter <jon-hunter@ti.com>
11506     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11507
11508 commit eab1007334b93a6209f1ec33615e26ef5311ede7
11509 Author: Steven A. Falco <sfalco@harris.com>
11510 Date:   Wed Aug 6 15:42:52 2008 -0400
11511
11512     ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
11513
11514     The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
11515     configuration to match the schematic, and also sets the SDR0_PFC1 register to
11516     select the corresponding mode for the UARTs.
11517
11518     Signed-off-by: Steven A. Falco <sfalco@harris.com>
11519     Signed-off-by: Stefan Roese <sr@denx.de>
11520
11521 commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
11522 Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
11523 Date:   Wed Aug 6 14:42:13 2008 +0200
11524
11525     avr32: add support for EarthLCD Favr-32 board
11526
11527     This patch adds support for the Favr-32 board made by EarthLCD.
11528
11529     This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
11530     has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
11531     Ethernet, audio out, USB device, SD-card slot, USART and various other
11532     connectors for cennecting stuff to SPI, I2C, GPIO, etc.
11533
11534     Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
11535     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11536
11537 commit bc9019e19758a19a388fb20ef18dc771cd39fdda
11538 Author: Rafael Campos <rafael.campos@hanscan.com>
11539 Date:   Thu Jul 31 10:22:20 2008 +0200
11540
11541     cfi-flash: Added support to flash_real_protect for Atmel flash devices
11542
11543     Some of the flash memories produced by ATMEL start in read-only mode.
11544     We need to unprotect it. This patch allows the AT49BV6416 to work with
11545     cfi_flash memories. Tested in the at91rm9200ek board.
11546
11547     Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
11548     Signed-off-by: Stefan Roese <sr@denx.de>
11549
11550 commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
11551 Author: Guennadi Liakhovetski <lg@denx.de>
11552 Date:   Tue Aug 5 15:36:39 2008 +0200
11553
11554     cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
11555
11556     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
11557     Signed-off-by: Stefan Roese <sr@denx.de>
11558
11559 commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
11560 Author: Stefan Roese <sr@denx.de>
11561 Date:   Wed Aug 6 14:06:03 2008 +0200
11562
11563     Fix merge problems
11564
11565     Signed-off-by: Stefan Roese <sr@denx.de>
11566
11567 commit f2302d4430e7f3f48308d6a585320fe96af8afbd
11568 Author: Stefan Roese <sr@denx.de>
11569 Date:   Wed Aug 6 14:05:38 2008 +0200
11570
11571     Fix merge problems
11572
11573     Signed-off-by: Stefan Roese <sr@denx.de>
11574
11575 commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
11576 Author: Kenneth Johansson <kenneth@southpole.se>
11577 Date:   Tue Jul 15 12:13:38 2008 +0200
11578
11579     mpc5121: Move iopin features from board specific to common files.
11580
11581     And in the process eliminate some duplicate register defines.
11582
11583     Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
11584
11585 commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
11586 Author: John Rigby <jrigby@freescale.com>
11587 Date:   Tue Aug 5 17:38:57 2008 -0600
11588
11589     mpc5121: squash some fdt fixup errors
11590
11591     On ADS5121 when booting linux the following errors are seen:
11592         Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
11593         Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
11594         Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
11595
11596     This is caused by ft_cpu_setup trying to deal with
11597     both old and new soc node naming.  This patch
11598     fixes this by being smarter about what to
11599     fixup.
11600
11601     Also do soc node fixups by compatible instead of by path.
11602     A new board config called OF_SOC_COMPAT defined
11603     to be "fsl,mpc5121-immr" replaces the old
11604     OF_SOC node path that was defined to be "soc@80000000".
11605
11606     Old device trees still work, but the compatiblity
11607     is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
11608     which is on by default in include/configs/ads5121.h.
11609
11610     Signed-off-by: John Rigby <jrigby@freescale.com>
11611
11612 commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
11613 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11614 Date:   Sat Aug 2 23:48:30 2008 +0200
11615
11616     drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
11617
11618     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11619
11620 commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
11621 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11622 Date:   Sat Aug 2 23:48:32 2008 +0200
11623
11624     nios2/sysid: fix printf warning
11625
11626     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11627
11628 commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
11629 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11630 Date:   Sat Aug 2 23:48:33 2008 +0200
11631
11632     Fix remaining build issues with MPC8xx FADS boards.
11633
11634     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11635
11636 commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
11637 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11638 Date:   Sat Aug 2 23:48:31 2008 +0200
11639
11640     nios2: fix phys_addr_t and phys_size_t support
11641
11642     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11643
11644 commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
11645 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11646 Date:   Sat Aug 2 23:48:34 2008 +0200
11647
11648     mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
11649
11650     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11651
11652 commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
11653 Author: Mark Jackson <mpfj@mimc.co.uk>
11654 Date:   Fri Aug 1 09:48:29 2008 +0100
11655
11656     Fix bitmap display for atmel lcd controller
11657
11658     The current lcd_display_bitmap() function does not work properly
11659     for the Atmel LCD controller.
11660
11661     2 fixes need to be done:-
11662
11663     (a) when setting the colour map, use the lcd_setcolreg() function
11664         as provided by the Atmel driver
11665     (b) the data is never actually written to the lcd framebuffer !!
11666
11667     Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
11668
11669 commit 2a433c66b1e2770349fe4911be23c375f053ebd8
11670 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11671 Date:   Fri Aug 1 08:40:34 2008 +0200
11672
11673     qemu_mips: update README to follow qemu update about default machine
11674
11675     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11676
11677 commit ac169d645f5f0e0b9a232563099209e92a355d8e
11678 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11679 Date:   Thu Jul 31 19:53:21 2008 -0500
11680
11681     ColdFire: Fix compilation issue caused by a missing function
11682
11683     Implement usec2ticks() which is used by fsl_i2c.c in
11684     lib_m68k/time.c
11685
11686     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11687
11688 commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
11689 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11690 Date:   Thu Jul 31 19:53:06 2008 -0500
11691
11692     Fix compilation error for TASREG
11693
11694     TASREG is ColdFire platform, the include ppc4xx.h in
11695     board/esd/common/flash.c causes conflict.
11696
11697     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11698
11699 commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
11700 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11701 Date:   Thu Jul 31 19:52:36 2008 -0500
11702
11703     Fix compilation error for MCF5275
11704
11705     Rename OBJ to COBJ in board/platform/Makefile
11706
11707     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11708
11709 commit 5c40548f01218360a1f1395198c50ff45f3035b5
11710 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11711 Date:   Thu Jul 31 19:52:28 2008 -0500
11712
11713     Fix compile error caused by incorrect function return type
11714
11715     Rename int mii_init(void) to void mii_init(void) for idmr
11716     ColdFire platform
11717
11718     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11719
11720 commit a58c78067c928976c082c758d3987e89ead5b191
11721 Author: Wolfgang Denk <wd@denx.de>
11722 Date:   Fri Aug 1 12:06:22 2008 +0200
11723
11724     Fix build issues with MPC8xx FADS boards.
11725
11726     Signed-off-by: Wolfgang Denk <wd@denx.de>
11727
11728 commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
11729 Author: Wolfgang Denk <wd@denx.de>
11730 Date:   Thu Jul 31 17:54:03 2008 +0200
11731
11732     Prepare v1.3.4-rc2: update CHANGELOG
11733
11734     Signed-off-by: Wolfgang Denk <wd@denx.de>
11735
11736 commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
11737 Author: Mark Jackson <mpfj@mimc.co.uk>
11738 Date:   Thu Jul 31 16:09:00 2008 +0100
11739
11740     Add gzipped logo support
11741
11742     The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
11743
11744       If this option is set, additionally to standard BMP
11745       images, gzipped BMP images can be displayed via the
11746       splashscreen support or the bmp command.
11747
11748     However, the splashscreen function *only* supports standard BMP images.
11749
11750     This patch adds the documented gzip support.
11751
11752     Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
11753
11754 commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
11755 Author: Mark Jackson <mpfj@mimc.co.uk>
11756 Date:   Thu Jul 31 15:56:48 2008 +0100
11757
11758     Fix Atmel LCD controller endianess for AVR32 processors
11759
11760     The Atmel lcd controller is used on Atmel's AT91 (little endian) and
11761     AVR32 (big endian) platforms.
11762
11763     As such, the controller can handle both big and little endian memory.
11764
11765     This patch fixes the driver for the AVR32 platform.
11766
11767     Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
11768
11769 commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
11770 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11771 Date:   Thu Jul 31 15:56:01 2008 +0200
11772
11773     apollon: fix build out of tree
11774
11775     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11776
11777 commit 2e752be39d3e398d4ab89ffa6634c397df298297
11778 Author: Guennadi Liakhovetski <lg@denx.de>
11779 Date:   Thu Jul 31 12:35:04 2008 +0200
11780
11781     Uncompressed images loaded to their start address shall set load_end too
11782
11783     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
11784     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
11785
11786 commit c37207d7f51e19c17f859966f314e27cc1231801
11787 Author: Wolfgang Denk <wd@denx.de>
11788 Date:   Wed Jul 16 16:38:59 2008 +0200
11789
11790     Fix printf() format problems with configurable prompts
11791
11792     U-Boot allows for configurable prompt strings using the
11793     CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
11794     the assumption was that any such user defined problts would contain
11795     exactly one "%d" format specifier. But some boards did not.
11796
11797     To allow for flexible boot prompts without adding too complex code we
11798     now allow to specify the whole list of printf() arguments in the user
11799     definition. This is powerful, but requires a responsible user who
11800     really understands what he is doing, as he needs to know for exanple
11801     which variables are available in the respective context.
11802
11803     Signed-off-by: Wolfgang Denk <wd@denx.de>
11804
11805 commit 54754120637b6a7f4ff774fb199fc550bcfea1da
11806 Author: Wolfgang Denk <wd@denx.de>
11807 Date:   Thu Jul 31 17:02:14 2008 +0200
11808
11809     TQM85xx: fix typo introduce by commit ffbb5cb9
11810
11811     Signed-off-by: Wolfgang Denk <wd@denx.de>
11812
11813 commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
11814 Author: Wolfgang Denk <wd@denx.de>
11815 Date:   Thu Jul 31 15:27:01 2008 +0200
11816
11817     mvbc_p board: fix most build warnings.
11818
11819     Signed-off-by: Wolfgang Denk <wd@denx.de>
11820
11821 commit c4ec6db074051d2f6fc76a66411c60621b22bc02
11822 Author: Wolfgang Denk <wd@denx.de>
11823 Date:   Thu Jul 31 13:57:20 2008 +0200
11824
11825     E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
11826
11827     Avoid "integer constant is too large for 'long' type" warnings.
11828     And simplify the code.
11829
11830     Signed-off-by: Wolfgang Denk <wd@denx.de>
11831
11832 commit 9196b44334c330cc13de2464c59181e4db71f549
11833 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
11834 Date:   Wed Jul 30 23:21:19 2008 +0400
11835
11836     8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
11837
11838     Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
11839
11840 commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
11841 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
11842 Date:   Wed Jul 30 23:20:32 2008 +0400
11843
11844     PPC: Add pci_clk in the global_data for CPM2 processors
11845
11846     This patch adds pci_clk field to the global_data structure for the
11847     processors which have CPM2 module in case the CONFIG_PCI is defined.
11848
11849     Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
11850
11851 commit f0ff885ca64655bee6540eb8a25eed90b1152686
11852 Author: Kumar Gala <galak@kernel.crashing.org>
11853 Date:   Wed Jul 30 14:13:30 2008 -0500
11854
11855     mpc85xx: Update linker scripts for Freescale boards
11856
11857     * Move to using absolute addressing always.  Makes the scripts a bit more
11858       portable and common
11859     * Moved .bss after the end of the image.  These allows us to have more
11860       room in the resulting binary image for code and data.
11861     * Removed .text object files that aren't really needed
11862     * Make sure _end is 4-byte aligned as the .bss init code expects this.
11863       (Its possible that the end of .bss isn't 4-byte aligned)
11864
11865     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11866
11867 commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
11868 Author: Kumar Gala <galak@kernel.crashing.org>
11869 Date:   Wed Jul 30 08:01:15 2008 -0500
11870
11871     Fix compile warnings in dlmalloc
11872
11873     The origional code was using on odd reference to get to the first
11874     real element in av_[].  The first two elements of the array are
11875     not used for actual bins, but for house keeping.  If we are more
11876     explicit about how use the first few elements we can get rid of the
11877     warnings:
11878
11879     dlmalloc.c: In function 'malloc_extend_top':
11880     dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
11881     dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
11882     dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
11883     ...
11884
11885     The logic of how this code came to be is:
11886         bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
11887
11888     SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
11889         bin_at(0) = &(av_[0])
11890
11891     Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
11892
11893     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11894
11895 commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
11896 Author: Stefan Roese <sr@denx.de>
11897 Date:   Wed Jul 30 10:21:01 2008 +0200
11898
11899     ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
11900
11901     Signed-off-by: Stefan Roese <sr@denx.de>
11902
11903 commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
11904 Author: Stefan Roese <sr@denx.de>
11905 Date:   Wed Jul 30 09:59:51 2008 +0200
11906
11907     cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
11908
11909     A recent patch used '#if (CONFIG_CMD_USB)' instead of
11910     '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
11911     common/bootm.c compile again.
11912
11913     Signed-off-by: Stefan Roese <sr@denx.de>
11914     Acked-by: Markus Klotzbuecher <mk@denx.de>
11915
11916 commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
11917 Author: Kyungmin Park <kmpark@infradead.org>
11918 Date:   Tue Jul 22 08:01:43 2008 +0900
11919
11920     Remove unused I2C at apollon board
11921
11922     There are no I2C devices on this board.
11923
11924     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
11925
11926 commit 3c95960e526b3b026da20201db64526f46faf14b
11927 Author: Wolfgang Denk <wd@denx.de>
11928 Date:   Thu Jul 31 10:12:09 2008 +0200
11929
11930     at91rm9200dk, csb637: fix NAND related build problems
11931
11932     Tried fixing NAND support for the at91rm9200dk board; untested.
11933     Disabled NAND support in the csb637 board config file.
11934
11935     Signed-off-by: Wolfgang Denk <wd@denx.de>
11936
11937 commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
11938 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
11939 Date:   Wed Jul 30 12:39:28 2008 +0200
11940
11941     ppc4xx: ML507: Environment in flash and MTD Support
11942
11943     - Relocate the location of U-Boot in the flash
11944     - Save the environment in one sector of the flash memory
11945     - MTD Support
11946
11947     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
11948     Signed-off-by: Stefan Roese <sr@denx.de>
11949
11950 commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
11951 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
11952 Date:   Tue Jul 29 17:16:10 2008 +0200
11953
11954     ppc4xx: ML507: Use of get_ram_size in board ml507
11955
11956     - Change suggested by WD
11957
11958     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
11959     Signed-off-by: Stefan Roese <sr@denx.de>
11960
11961 commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
11962 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
11963 Date:   Mon Jul 21 20:30:07 2008 +0200
11964
11965     ppc4xx: ML507: U-Boot in flash and System ACE
11966
11967     This patch allows booting from FLASH the ML507 board by Xilinx.
11968     Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
11969
11970     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
11971     Signed-off-by: Stefan Roese <sr@denx.de>
11972
11973 commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
11974 Author: Julien May <mailinglist@miromico.ch>
11975 Date:   Mon Jun 23 13:57:52 2008 +0200
11976
11977     Add support for the hammerhead (AVR32) board
11978
11979     The Hammerhead platform is built around a AVR32 32-bit microcontroller
11980     from Atmel.  It offers versatile peripherals, such as ethernet, usb
11981     device, usb host etc.
11982
11983     The board also incooperates a power supply and is a Power over Ethernet
11984     (PoE) Powered Device (PD).
11985
11986     Additonally, a Cyclone III FPGA from Altera is integrated on the board.
11987     The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
11988     DDR2 SDRAM interfaces, which will cover even the most exceptional need
11989     of memory bandwidth. Together with the onboard video decoder the board
11990     is ready for video processing.
11991
11992     For more information see: http:///www.miromico.com/hammerhead
11993
11994     Signed-off-by: Julien May <mailinglist@miromico.ch>
11995     [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
11996     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11997
11998 commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
11999 Author: Kumar Gala <galak@kernel.crashing.org>
12000 Date:   Tue Jul 29 12:23:49 2008 -0500
12001
12002     fsl_i2c: Use timebase timer functions instead of get_timer()
12003
12004     The current implementation of get_timer() is only really useful after we
12005     have relocated u-boot to memory.  The i2c code is used before that as part
12006     of the SPD DDR setup.
12007
12008     We actually have a bug when using the get_timer() code before relocation
12009     because the .bss hasn't been setup and thus we could be reading/writing
12010     a random location (probably in flash).
12011
12012     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12013
12014 commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
12015 Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
12016 Date:   Tue Jul 29 14:49:31 2008 +0200
12017
12018     Adder8xx: Fix CFG_MONITOR_LEN
12019
12020     Due to increased space usage, U-Boot can no longer be stored in three sectors.
12021     The current U-Boot use just over three flash sectors (197k), and U-Boot will
12022     become corrupt after saving environment variables. This patch adds another 64k
12023     to CFG_MONITOR_LEN.
12024
12025     Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
12026
12027 commit a4c59ad4a21140550ada6f97690d2527c4146ce5
12028 Author: Kyungmin Park <kmpark@infradead.org>
12029 Date:   Tue Jul 29 08:47:57 2008 +0900
12030
12031     Add OneNAND IPL related files to gitignore
12032
12033     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12034
12035 commit 8d87589e8e874df7120a3d9667f051bc33bac250
12036 Author: Rafal Jaworowski <raj@semihalf.com>
12037 Date:   Mon Jul 28 20:38:25 2008 +0200
12038
12039     API: Teach the storage layer about SATA and MMC options.
12040
12041     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
12042     Acked-by: Rafal Jaworowski <raj@semihalf.com>
12043
12044 commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
12045 Author: Rafal Jaworowski <raj@semihalf.com>
12046 Date:   Mon Jul 28 20:37:48 2008 +0200
12047
12048     API: Dump contents of sector 0 in the demo application.
12049
12050     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
12051     Acked-by: Rafal Jaworowski <raj@semihalf.com>
12052
12053 commit 13ca6305f2eba49c175f6370c35286141059c789
12054 Author: Rafal Jaworowski <raj@semihalf.com>
12055 Date:   Mon Jul 28 20:37:10 2008 +0200
12056
12057     API: Correct storage enumeration routine, other minor fixes in API storage area.
12058
12059     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
12060     Acked-by: Rafal Jaworowski <raj@semihalf.com>
12061
12062 commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
12063 Author: Rafal Jaworowski <raj@semihalf.com>
12064 Date:   Mon Jul 28 20:36:19 2008 +0200
12065
12066     API: Fix compilation warnings in api_examples/demo.c.
12067
12068     Signed-off-by: Rafal Czubak <rcz@semihalf.com>
12069
12070 commit c14eefcc48212af2f3314809605698dd8393a90a
12071 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12072 Date:   Sun Jul 27 17:09:43 2008 +0200
12073
12074     Fix more printf() format warnings
12075
12076     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12077
12078 commit 936897d4d1365452bbbdf8430db5e7769ef08d38
12079 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12080 Date:   Fri Jul 25 15:18:16 2008 +0200
12081
12082     Fix remaining CFG_CMD_ define, ifdef and comments
12083
12084     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12085
12086 commit 5d1d00fb36005482e1803a00ddc46efa11d719af
12087 Author: Stefano Babic <sbabic@denx.de>
12088 Date:   Fri Jul 25 08:57:40 2008 +0200
12089
12090     Add include for config.h in command.h.
12091
12092     Because the cmd_tbl_s structure depends on the configuration file, it
12093     must be assured that config.h is included before the structure is
12094     evaluated by the compiler. If this is not certain, it could happen
12095     that the compiler generates structures of different size, depending
12096     on the fact if the source file includes <config.h> before or after
12097     <command.h>.
12098
12099     The effect is that u-boot crashes when tries to relocate the command
12100     table (for ppc) or try to access to the command table for other
12101     architectures.
12102
12103     The problem can happen on board-depending commands. All general
12104     commands under /common are unaffected, because they include already
12105     config.h before command.h.
12106
12107     Signed-off-by: Stefano Babic <sbabic@denx.de>
12108
12109 commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
12110 Author: Scott Wood <scottwood@freescale.com>
12111 Date:   Wed Jul 23 13:16:06 2008 -0500
12112
12113     NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
12114
12115     This fixes building out-of-tree.
12116
12117     Signed-off-by: Scott Wood <scottwood@freescale.com>
12118
12119 commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
12120 Author: Heiko Schocher <hs@denx.de>
12121 Date:   Wed Jul 23 07:30:46 2008 +0200
12122
12123     Fix warnings if compiling with IDE support.
12124
12125     cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
12126     cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
12127
12128     Signed-off-by: Heiko Schocher <hs@denx.de>
12129
12130 commit 7610db17fd4d59c51d825488526d85ede2f06767
12131 Author: Adrian Filipi <adrian.filipi@eurotech.com>
12132 Date:   Tue Jul 22 14:28:11 2008 -0400
12133
12134     Removed support for the adsvix board.
12135
12136     Support for the adsvix was originally provided by Applied Data
12137     Systems (ADS), inc., now EuroTech, Inc.
12138     The board never shipped aside from some sample boards.
12139
12140     Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
12141
12142 commit f96b44cef897bd372beb86dde1b33637c119d84d
12143 Author: Remy Bohmer <linux@bohmer.net>
12144 Date:   Tue Jul 22 16:22:11 2008 +0200
12145
12146     ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
12147
12148     If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
12149     never set, because relocation to RAM is actually never done by U-boot
12150     itself. However, several pieces of code check if this flag is set at
12151     some time.
12152
12153     So, to make sure this flag is set on boards skipping relocation, this
12154     is added to the initialisation of U-boot at a moment where it is safe
12155     to do so.
12156
12157     Signed-off-by: Remy Bohmer <linux@bohmer.net>
12158
12159 commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
12160 Author: Timur Tabi <timur@freescale.com>
12161 Date:   Mon Jul 21 14:26:23 2008 -0500
12162
12163     fsl-i2c: fix writes to data segment before relocation
12164
12165     Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
12166     relocation.  Commit d8c82db4 added the ability for i2c_init() to program the
12167     I2C bus speed and save the value in i2c_bus_speed[], which is a global
12168     variable.  It is an error to write to the data segment before relocation,
12169     which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
12170
12171     Signed-off-by: Timur Tabi <timur@freescale.com>
12172
12173 commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
12174 Author: Wolfgang Ocker <weo@reccoware.de>
12175 Date:   Mon Jul 28 16:56:51 2008 +0200
12176
12177     mips: Fix baudrate divisor computation on alchemy cpus
12178
12179     Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
12180     on alchemy cpus.
12181
12182     Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
12183     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
12184
12185 commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
12186 Author: Ben Warren <biggerbadderben@gmail.com>
12187 Date:   Sat Jul 5 00:08:48 2008 -0700
12188
12189     Moved initialization of AVR32 Ethernet controllers to board_eth_init()
12190
12191     Renamed initialization functions for atngw100 and atstk1000.
12192     Removed initializations for these boards from net/eth.c
12193
12194     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12195     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12196
12197 commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
12198 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12199 Date:   Wed Jul 23 10:55:46 2008 +0200
12200
12201     spi flash: Fix printf() format warnings
12202
12203     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12204
12205 commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
12206 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12207 Date:   Wed Jul 23 10:55:31 2008 +0200
12208
12209     atmel_mci: Fix printf() format warnings
12210
12211     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12212
12213 commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
12214 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12215 Date:   Wed Jul 23 10:55:15 2008 +0200
12216
12217     avr32: Fix printf() format warnings
12218
12219     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12220
12221 commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
12222 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12223 Date:   Wed Jul 23 10:52:19 2008 +0200
12224
12225     avr32: asm/io.h needs asm/types.h
12226
12227     map_physmem() takes a phys_addr_t as parameter. This type is defined in
12228     asm/types.h, so we need to include that file.
12229
12230     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12231
12232 commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
12233 Author: Michal Simek <monstr@monstr.eu>
12234 Date:   Thu Jul 17 12:25:46 2008 +0200
12235
12236     microblaze: Fix printf() format issues
12237
12238     Signed-off-by: Michal Simek <monstr@monstr.eu>
12239
12240 commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
12241 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
12242 Date:   Thu Jul 17 07:27:51 2008 +0530
12243
12244     Remove unused code from lib_arm/bootm.c
12245
12246     Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
12247
12248 commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
12249 Author: Detlev Zundel <dzu@denx.de>
12250 Date:   Wed Jul 16 18:56:45 2008 +0200
12251
12252     tqm85xx: Demystify 'DK: !!!' comment
12253
12254     Signed-off-by: Detlev Zundel <dzu@denx.de>
12255
12256 commit b2f44ba570f3a01113bbb745daf46f3858d22f53
12257 Author: Detlev Zundel <dzu@denx.de>
12258 Date:   Wed Jul 16 18:56:44 2008 +0200
12259
12260     83xx/85xx/86xx: Add LTEDR local bus definitions
12261
12262     Signed-off-by: Detlev Zundel <dzu@denx.de>
12263
12264 commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
12265 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12266 Date:   Wed Jul 16 16:22:32 2008 +0200
12267
12268     serial_xuartlite.c: fix compiler warnings
12269
12270     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12271     Acked-by: Grant Likely <grant.likely@secretlab.ca>
12272
12273 commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
12274 Author: Stefan Roese <sr@denx.de>
12275 Date:   Fri Jul 18 11:03:35 2008 +0200
12276
12277     POST: Add disable interrupts in some of the missing CPU POST tests
12278
12279     Some CPU POST tests did not disable the interrupts while running. This
12280     seems to be necessary to protect this self modifying code.
12281
12282     Signed-off-by: Stefan Roese <sr@denx.de>
12283
12284 commit 97a3bf268d096e0e97e54048448c35114edcf557
12285 Author: Stefan Roese <sr@denx.de>
12286 Date:   Fri Jul 18 10:43:24 2008 +0200
12287
12288     ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
12289
12290     This is needed for boards that define CFG_64BIT_STRTOUL but don't define
12291     CFG_64BIT_LBA.
12292
12293     Signed-off-by: Stefan Roese <sr@denx.de>
12294
12295 commit 0043ac55024963295fc79b39af85b6dc3b261e17
12296 Author: Niklaus Giger <niklaus.giger@netstal.com>
12297 Date:   Fri Jul 18 11:22:23 2008 +0200
12298
12299     POST PPC4xx/spr IVPR only if PPC440
12300
12301     The SPR IVPR register is only present (as far as I know) for
12302     processors with a PPC440 core.
12303
12304     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12305     Acked-by: Stefan Roese <sr@denx.de>
12306
12307 commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
12308 Author: Stefan Roese <sr@denx.de>
12309 Date:   Fri Jul 18 10:42:29 2008 +0200
12310
12311     ppc4xx: Enable 64bit printf format on 440/460 platforms
12312
12313     This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
12314     440/460 platforms. This may be needed since those platforms support
12315     36bit physical address space.
12316
12317     Signed-off-by: Stefan Roese <sr@denx.de>
12318
12319 commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
12320 Author: Stefan Roese <sr@denx.de>
12321 Date:   Fri Jul 18 15:57:23 2008 +0200
12322
12323     ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
12324
12325     This patch fixes a problem with incorrect MODTx (On Die Termination)
12326     setup for a configuration with multiple DIMM's and multiple ranks.
12327     Without this change Katmai was unable to boot Linux with DDR2 frequency
12328     >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
12329     with DDR2 frequency = 640MHz and mem=4GB.
12330
12331     Signed-off-by: Stefan Roese <sr@denx.de>
12332
12333 commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
12334 Author: Stefan Roese <sr@denx.de>
12335 Date:   Fri Jul 18 12:24:41 2008 +0200
12336
12337     ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
12338
12339     Signed-off-by: Stefan Roese <sr@denx.de>
12340
12341 commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
12342 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12343 Date:   Thu Jul 17 12:47:09 2008 +0200
12344
12345     ppc4xx: ML507 Board Support
12346
12347     The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
12348         among others:
12349         -Virtex 5 FX FPGA (With a ppc440x5 in it)
12350         -256MB of SDRAM2
12351         -32MB of Flash
12352         -I2C Eeprom
12353         -System ACE chip
12354         -Serial ATA connectors
12355         -RS232 Level Conversors
12356         -Ethernet Transceiver
12357
12358     This patch gives support to a standard design produced by EDK for this
12359     board: ppc440, uartlite, xilinx_int and flash
12360
12361     - Includes Changes propossed by Stefan Roese and Michal Simek
12362
12363     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12364     Acked-by: Stefan Roese <sr@denx.de>
12365
12366 commit d865fd09809a3a18669f35f970781820af40e4de
12367 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12368 Date:   Thu Jul 17 11:44:12 2008 +0200
12369
12370     ppc4xx: CPU PPC440x5 on Virtex5 FX
12371
12372     -This patchs gives support for the embbedded ppc440
12373      on the Virtex5 FPGAs
12374     -interrupts.c divided in uic.c and interrupts.c
12375     -xilinx_irq.c for xilinx interrupt controller
12376     -Include modifications propossed by  Stefan Roese
12377
12378     Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
12379     Acked-by: Stefan Roese <sr@denx.de>
12380
12381 commit 340ccb260f21516be360745d5c5e3bd0657698df
12382 Author: Sebastian Siewior <bigeasy@linutronix.de>
12383 Date:   Wed Jul 16 20:04:49 2008 +0200
12384
12385     cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
12386
12387     This got broken by commits 93c56f212c
12388      [cfi_flash: support of long cmd in U-boot.]
12389
12390     That command needs to be in little endian format on BE machines
12391     with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
12392     gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
12393     the cmdbuf in case portwidth = chipwidth = 8bit.
12394
12395     Cc: Alexey Korolev <akorolev@infradead.org>
12396     Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
12397     Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
12398
12399 commit 11188d55bc16dd907451c00282e00a038f73dd62
12400 Author: Stefan Roese <sr@denx.de>
12401 Date:   Thu Jul 17 10:40:51 2008 +0200
12402
12403     ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
12404
12405     Signed-off-by: Stefan Roese <sr@denx.de>
12406
12407 commit 021f6df6e96af5b387810cf96d24848da1faa55c
12408 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
12409 Date:   Thu Jul 10 17:20:51 2008 +0400
12410
12411     83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
12412
12413     The thinko was quite silly indeed, I messed with !ptr. Normally this
12414     would trigger some fault, but in U-Boot NULL pointer is equal to phys
12415     0, so the code was working still, just didn't actually test mpc8315erdb
12416     environment variable value. Heh.
12417
12418     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
12419     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12420
12421 commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
12422 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
12423 Date:   Tue Jul 8 21:00:04 2008 +0400
12424
12425     83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
12426
12427     Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
12428     support, or without TSEC1 but with USB ULPI PHY support in addition.
12429     With this patch user can specify desired USB PHY.
12430
12431     Also, it seems that we can't distinguish the two boards in software, so
12432     user have to set `mpc8315erdb' environment variable to either 'tsec1'
12433     (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
12434     Linux will not probe for TSEC1.
12435
12436     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
12437     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12438
12439 commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
12440 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
12441 Date:   Tue Jul 8 20:59:43 2008 +0400
12442
12443     fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
12444
12445     Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
12446     MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
12447     (connected to the four-ports hub, usb host only).
12448
12449     This patch implements support for passing Dual-Role USB controller's
12450     device tree property phy_type through the usb_phy_type environment
12451     variable.
12452
12453     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
12454     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12455     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12456
12457 commit 699f05125509249072a0b865c8d35520d97cd501
12458 Author: Wolfgang Denk <wd@denx.de>
12459 Date:   Tue Jul 15 22:22:44 2008 +0200
12460
12461     Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
12462
12463     Signed-off-by: Wolfgang Denk <wd@denx.de>
12464
12465 commit bcab74baa6b1b1c969038ab6f64a186239180405
12466 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12467 Date:   Tue Jul 15 11:23:02 2008 -0400
12468
12469     Round the serial port clock divisor value returned by calc_divisor()
12470
12471     Round the serial port clock divisor value returned by
12472     calc_divisor()
12473
12474     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12475     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12476
12477 commit 0328ef0edfe950f0b7b8b368dae482531506b74a
12478 Author: Robin Getz <rgetz@blackfin.uclinux.org>
12479 Date:   Tue Jul 15 21:44:46 2008 +0200
12480
12481     Fix DHCP protocol so U-Boot does not respond too early
12482     on the network with it's offered IP number; it should not reply until
12483     after it has received a DHCP ACK message. Also ensures that U-Boot
12484     does it's DHCPREQUEST as broadcast (per RFC 2131).
12485
12486     Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
12487     Acked-by: Ben Warren <biggerbadderben@gmail.com>
12488     Signed-off-by: Wolfgang Denk <wd@denx.de>
12489
12490 commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
12491 Author: Sebastian Siewior <bigeasy@linutronix.de>
12492 Date:   Tue Jul 15 13:35:23 2008 +0200
12493
12494     cfi_flash: make the command u32 only
12495
12496     This got changed by commit 93c56f212c
12497     [cfi_flash: support of long cmd in U-boot.]
12498
12499     Long is the wrong type because it will behave differently on 64bit
12500     machines in a way that is probably not expected. u32 should be
12501     enough.
12502
12503     Cc: Alexey Korolev <akorolev@infradead.org>
12504     Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
12505     Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
12506
12507 commit 31cfe57491b183acae575d486729e158f016c27b
12508 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12509 Date:   Mon Jul 14 23:48:41 2008 +0200
12510
12511     tools/gitignore: update to all generated files
12512
12513     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12514
12515 commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
12516 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
12517 Date:   Wed Jul 9 18:30:44 2008 +0200
12518
12519     mpc5xxx: Add MVBC_P board support
12520
12521     The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
12522     controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
12523
12524     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
12525     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
12526
12527 commit e2d31fb3450653115452144363d5bde4e5e3e693
12528 Author: Timur Tabi <timur@freescale.com>
12529 Date:   Thu Jun 19 17:56:11 2008 -0500
12530
12531     Update Freescale sys_eeprom.c to handle CCID formats
12532
12533     Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats.  The
12534     NXID format replaces the older CCID format, but it's important to support both
12535     since most boards out there still use the CCID format.  This change is in
12536     preparation for using one file to handle both formats.  This will also unify
12537     EEPROM support for all Freescale 85xx and 86xx boards.
12538
12539     Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
12540     instead of ID_EEPROM_ADDR.
12541
12542     Signed-off-by: Timur Tabi <timur@freescale.com>
12543
12544 commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
12545 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12546 Date:   Fri Jul 11 17:22:43 2008 +0900
12547
12548     pci: sh: Add pci_skip_dev and pci_print_dev function
12549
12550     Add function of new PCI, pci_skip_dev and pci_print_dev.
12551
12552     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
12553     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12554
12555 commit 1107014e835ec9d46c0333f4211d104f77442db0
12556 Author: Andy Fleming <afleming@freescale.com>
12557 Date:   Mon Jul 14 20:29:07 2008 -0500
12558
12559     Clean up INIT_RAM options
12560
12561     The L2_INIT_RAM option was unused, and recent changes to the TLB code
12562     meant that the INIT_RAM TLBs weren't being cleared out.  In order to reduce
12563     the amount of mapped space attached to nothing, we change things so the TLBs
12564     get cleared.
12565
12566     Signed-off-by: Andy Fleming <afleming@freescale.com>
12567
12568 commit 4524561820a9327e89107854b3a7187800ccf719
12569 Author: Andy Fleming <afleming@freescale.com>
12570 Date:   Mon Jul 14 20:26:57 2008 -0500
12571
12572     Remove fake flash bank from 8544 DS
12573
12574     The fake flash bank was generating errors for anyone who didn't have a
12575     PromJET hooked up to the board.  As that constitutes the vast majority of
12576     users, we remove it.
12577
12578     Signed-off-by: Andy Fleming <afleming@freescale.com>
12579
12580 commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
12581 Author: Kumar Gala <galak@kernel.crashing.org>
12582 Date:   Mon Jul 14 14:07:03 2008 -0500
12583
12584     MPC8544DS: Add ATI Video card support
12585
12586     Add support for using a PCIe ATI Video card on PCIe2.
12587
12588     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12589
12590 commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
12591 Author: Kumar Gala <galak@kernel.crashing.org>
12592 Date:   Mon Jul 14 14:07:02 2008 -0500
12593
12594     85xx: Add some L1/L2 SPR register definitions
12595
12596     Add new L1/L2 SPRs related to e500mc cache config and control.
12597
12598     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12599
12600 commit e5852787f0c3c442a276262f13d91ca450605ac0
12601 Author: Kumar Gala <galak@kernel.crashing.org>
12602 Date:   Mon Jul 14 14:07:01 2008 -0500
12603
12604     MPC8544DS: Report board id, board version and fpga version.
12605
12606     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12607
12608 commit 73f15a060f67a2462551c334215bd20fac6b81d1
12609 Author: Kumar Gala <galak@kernel.crashing.org>
12610 Date:   Mon Jul 14 14:07:00 2008 -0500
12611
12612     85xx: Cleanup L2 cache size detection
12613
12614     The L2 size detection code was a bit confusing and we kept having to add
12615     code to it to handle new processors.  Change the sense of detection so we
12616     look for the older processors that aren't changing.
12617
12618     Also added support for 1M cache size on 8572.
12619
12620     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12621
12622 commit c3ca7e5e00a24451f20df3bded9a61ba541921df
12623 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
12624 Date:   Fri Jul 11 15:33:08 2008 -0400
12625
12626     sbc8560: enable CONFIG_OF_LIBFDT by default
12627
12628     Make the default build for the sbc8560 board be powerpc
12629     capable with libfdt support.
12630
12631     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12632
12633 commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
12634 Author: Andy Fleming <afleming@freescale.com>
12635 Date:   Mon Jul 14 20:04:40 2008 -0500
12636
12637     Fix indentation for default boot environment variables
12638
12639     This was proposed by Paul Gortmaker in response to Wolfgang's comments on
12640     similar #defines in sbc8560.h.
12641
12642     Signed-off-by: Andy Fleming <afleming@freescale.com>
12643
12644 commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
12645 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
12646 Date:   Fri Jul 11 15:33:07 2008 -0400
12647
12648     sbc8560: add default fdt values
12649
12650     Add in the default fdt settings and the typical EXTRA_ENV
12651     settings as borrowed from the mpc8560ads.  Fix a couple
12652     of stale references to the mpc8560ads dating back to the
12653     original clone/fork.
12654
12655     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12656     Signed-off-by: Andy Fleming <afleming@freescale.com>
12657
12658 commit d04e76edf92f7f89696989e8702b97e020455af3
12659 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
12660 Date:   Fri Jul 11 15:33:06 2008 -0400
12661
12662     sbc8560: add in ft_board_setup()
12663
12664     Add in for the sbc8560, the ft_board_setup() routine, based on what is
12665     in use for the Freescale MPC8560ADS board.
12666
12667     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12668
12669 commit c158bcaca3b31cbe38c4143812e6170e38a57393
12670 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
12671 Date:   Fri Jul 11 15:33:05 2008 -0400
12672
12673     sbc8560: define eth0 and eth1 instead of eth1 and eth2
12674
12675     The existing config doesn't define CONFIG_HAS_ETH0, and so the
12676     fdt support doesn't update the zeros in the dtb local-mac with
12677     real data from the u-boot env.  Since the existing config is
12678     tailored to just two interfaces, get rid of the ETH2 definitions
12679     at the same time.
12680
12681     Also don't include any end user specific data into the environment
12682     by default -- things like MAC address, network parameters etc. need
12683     to come from the end user.
12684
12685     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12686     Signed-off-by: Andy Fleming <afleming@freescale.com>
12687
12688 commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
12689 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
12690 Date:   Fri Jul 11 15:33:04 2008 -0400
12691
12692     sbc8560: properly set cs0_bnds for 512MB
12693
12694     The sbc8560 board ships with 512MB of memory installed,
12695     but the current cs0_bnds is hard coded for 256MB.  Set the
12696     value based on CFG_SDRAM_SIZE.
12697
12698     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12699
12700 commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
12701 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
12702 Date:   Fri Jul 11 15:33:03 2008 -0400
12703
12704     sbc8560: proper definitions for TSEC.
12705
12706     The definitions for the TSEC have become out of date.  There is no
12707     longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
12708     Update to match those of other boards, like the MPC8560ADS.
12709
12710     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12711     Acked-by: Ben Warren <biggerbadderben@gmail.com>
12712
12713 commit 71074abbe0c76429577aff58aeff0a24ad210b23
12714 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
12715 Date:   Wed Jul 9 13:23:05 2008 -0400
12716
12717     8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
12718
12719     Some boards that have external 16550 UARTs don't have a direct
12720     tie between bi_busfreq and the clock used for the UARTs.  Boards
12721     that do have such a tie should set CFG_NS16550_CLK to be
12722     get_bus_freq(0) -- which most of them do already.
12723
12724     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12725     Acked-by: Kim Phillips <kim.phillips@freescale.com>
12726
12727 commit 24ef76f320fbadf074105229826514db140f939f
12728 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
12729 Date:   Wed Jul 2 07:03:53 2008 -0700
12730
12731     Change the temp map to ROM to align addresses to page size.
12732
12733     With a page size of BOOKE_PAGESZ_16M, both the real and effective
12734     addresses must be multiples of 16MB.  The hardware silently truncates
12735     them so the code happens to work.  This patch clarifies the situation
12736     by establishing addresses that the hardware doesn't need to truncate.
12737
12738     Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
12739     Signed-off-by: Andy Fleming <afleming@freescale.com>
12740
12741 commit 06b4186c10204b6683edb047ac5f506fb0ce0937
12742 Author: Kim Phillips <kim.phillips@freescale.com>
12743 Date:   Tue Jun 17 17:45:22 2008 -0500
12744
12745     mpc85xx: use IS_E_PROCESSOR macro
12746
12747     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12748
12749 commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
12750 Author: Kim Phillips <kim.phillips@freescale.com>
12751 Date:   Mon Jun 16 15:55:53 2008 -0500
12752
12753     fdt: add crypto node handling for MPC8{3, 5}xxE processors
12754
12755     Delete the crypto node if not on an E-processor.  If on 8360 or 834x family,
12756     check rev and up-rev crypto node (to SEC rev. 2.4 property values)
12757     if on an 'EA' processor, e.g. MPC8349EA.
12758
12759     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12760
12761 commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
12762 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12763 Date:   Fri Jul 11 15:10:11 2008 -0400
12764
12765     ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
12766
12767     ARM DaVinci: Remove extern phy_t declaration by moving
12768     code to proper place.
12769
12770     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12771
12772 commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
12773 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12774 Date:   Fri Jul 11 15:10:10 2008 -0400
12775
12776     ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
12777
12778     ARM DaVinci: Remove duplicate definitions of MACH_TYPE
12779     and prototype of i2c_init().
12780
12781     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
12782
12783 commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
12784 Author: Kumar Gala <galak@kernel.crashing.org>
12785 Date:   Mon Jul 14 14:03:02 2008 -0500
12786
12787     Fix some more printf() format problems.
12788
12789     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12790
12791 commit 45b16d22c64674ccd8c4637456a987463609141c
12792 Author: Wolfgang Denk <wd@denx.de>
12793 Date:   Mon Jul 14 22:38:42 2008 +0200
12794
12795     Fix coding style; make code better parsable by external tools
12796
12797     Signed-off-by: Wolfgang Denk <wd@denx.de>
12798
12799 commit b880cbf207b1c109d3a661417a8feddcbd729a9d
12800 Author: Wolfgang Denk <wd@denx.de>
12801 Date:   Mon Jul 14 21:19:08 2008 +0200
12802
12803     cpu/i386/serial.c: Fix syntax errors
12804
12805     Signed-off-by: Wolfgang Denk <wd@denx.de>
12806
12807 commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
12808 Author: Wolfgang Denk <wd@denx.de>
12809 Date:   Mon Jul 14 20:41:35 2008 +0200
12810
12811     elppc board: Coding style cleanup.
12812
12813     Signed-off-by: Wolfgang Denk <wd@denx.de>
12814
12815 commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
12816 Author: Wolfgang Denk <wd@denx.de>
12817 Date:   Mon Jul 14 20:40:22 2008 +0200
12818
12819     elppc board: fix syntax error.
12820
12821     Signed-off-by: Wolfgang Denk <wd@denx.de>
12822
12823 commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
12824 Author: Wolfgang Denk <wd@denx.de>
12825 Date:   Mon Jul 14 20:38:26 2008 +0200
12826
12827     EB+MCF-EV123 board: fix coding style (alingment)
12828
12829     Signed-off-by: Wolfgang Denk <wd@denx.de>
12830
12831 commit 6841785a0bb0f38175456a923edd634fb7dd6947
12832 Author: Wolfgang Denk <wd@denx.de>
12833 Date:   Mon Jul 14 20:36:44 2008 +0200
12834
12835     EB+MCF-EV123 board: fix syntx error
12836
12837     Signed-off-by: Wolfgang Denk <wd@denx.de>
12838
12839 commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
12840 Author: Andy Fleming <afleming@freescale.com>
12841 Date:   Mon Jul 7 18:02:08 2008 -0500
12842
12843     Remove LBC_CACHE_BASE from 8544 DS
12844
12845     The 8544 DS doesn't have any cacheable Local Bus memories set up.  By mapping
12846     space for some anyway, we were allowing speculative loads into unmapped space,
12847     which would cause an exception (annoying, even if ultimately harmless).
12848     Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
12849     problem.
12850
12851     Signed-off-by: Andy Fleming <afleming@freescale.com>
12852
12853 commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
12854 Author: Wolfgang Denk <wd@denx.de>
12855 Date:   Mon Jul 14 15:19:07 2008 +0200
12856
12857     Code cleanup: fix old style assignment ambiguities like "=-" etc.
12858
12859     Signed-off-by: Wolfgang Denk <wd@denx.de>
12860
12861 commit d7854223c5c85b5849fbf422cc8ac0efef461c37
12862 Author: Wolfgang Denk <wd@denx.de>
12863 Date:   Mon Jul 14 15:10:53 2008 +0200
12864
12865     AmigaOneG3SE: remove dead and incomplete files
12866
12867     Signed-off-by: Wolfgang Denk <wd@denx.de>
12868
12869 commit b64f190b7a34224df09b559ca111eb1b733f00ad
12870 Author: Wolfgang Denk <wd@denx.de>
12871 Date:   Mon Jul 14 15:06:35 2008 +0200
12872
12873     Fix printf() format issues with sizeof_t types by using %zu
12874
12875     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12876     Signed-off-by: Wolfgang Denk <wd@denx.de>
12877
12878 commit f354b73e16a86f9e9085471a830605f74f84ea5d
12879 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12880 Date:   Mon Jul 14 14:11:45 2008 +0200
12881
12882     vsprintf: add z and t options
12883
12884     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12885
12886 commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
12887 Author: Wolfgang Denk <wd@denx.de>
12888 Date:   Sun Jul 13 23:07:35 2008 +0200
12889
12890     Fix some more printf() format issues.
12891
12892     Signed-off-by: Wolfgang Denk <wd@denx.de>
12893
12894 commit d5996dd555edf52721b7691a4c59de016251ed39
12895 Author: Wolfgang Denk <wd@denx.de>
12896 Date:   Sun Jul 13 19:51:00 2008 +0200
12897
12898     Fix some more printf() format problems.
12899
12900     Signed-off-by: Wolfgang Denk <wd@denx.de>
12901
12902 commit 0f9d5f6d6e814907794995c6a22af752040c35d9
12903 Author: Wolfgang Denk <wd@denx.de>
12904 Date:   Sun Jul 13 19:48:26 2008 +0200
12905
12906     ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
12907
12908     Signed-off-by: Wolfgang Denk <wd@denx.de>
12909
12910 commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
12911 Author: Anatolij Gustschin <agust@denx.de>
12912 Date:   Sat Jul 12 17:31:36 2008 +0200
12913
12914     Fix bug in Lime video driver
12915
12916     We need to wait while drawing engine clears frame
12917     buffer before any further software accesses to frame
12918     buffer will be initiated. Otherwise software drawn
12919     parts could be partially destroyed by the drawing
12920     engine or even GDC chip freeze could occur (as
12921     observed on socrates board).
12922
12923     Signed-off-by: Anatolij Gustschin <agust@denx.de>
12924
12925 commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
12926 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12927 Date:   Sat Jul 12 14:36:34 2008 +0200
12928
12929     Fix some more printf() format issues.
12930
12931     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12932
12933 commit 18c8a28aad49803780bd8d52432ded528e37e701
12934 Author: Michal Simek <monstr@monstr.eu>
12935 Date:   Fri Jul 11 15:11:57 2008 +0200
12936
12937     hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
12938
12939     Signed-off-by: Michal Simek <monstr@monstr.eu>
12940     Acked-by: Stefan Roese <sr@denx.de>
12941
12942 commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
12943 Author: Michal Simek <monstr@monstr.eu>
12944 Date:   Fri Jul 11 11:50:53 2008 +0200
12945
12946     hwmon: Cleaning hwmon devices
12947
12948     Clean Makefile
12949     Move device specific values to driver for better reading
12950
12951     Signed-off-by: Michal Simek <monstr@monstr.eu>
12952     Acked-by: Stefan Roese <sr@denx.de>
12953
12954 commit c78fce699c7ff467ecd841da6a79f065180bf578
12955 Author: Michal Simek <monstr@monstr.eu>
12956 Date:   Fri Jul 11 10:43:13 2008 +0200
12957
12958     FIS: repare incorrect return value with ramdisk handling
12959
12960     Microblaze and PowerPC use boot_get_ramdisk for loading
12961     ramdisk to memory with checking return value.
12962     Return 0 means success. Return 1 means failed.
12963     Here is correspond part of code from bootm.c which check
12964     return code.
12965
12966     ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
12967                 &rd_data_start, &rd_data_end);
12968     if (ret)
12969         goto error;
12970
12971     Signed-off-by: Michal Simek <monstr@monstr.eu>
12972
12973 commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
12974 Author: Michal Simek <monstr@monstr.eu>
12975 Date:   Fri Jul 11 10:10:32 2008 +0200
12976
12977     microblaze: Remove useless ancient headers
12978
12979     Signed-off-by: Michal Simek <monstr@monstr.eu>
12980
12981 commit 53ea981c3124b13c137c2d10e975b7c6672266e0
12982 Author: Michal Simek <monstr@monstr.eu>
12983 Date:   Fri Jul 11 10:10:31 2008 +0200
12984
12985     microblaze: Clean uartlite driver
12986
12987     Redesign uartlite driver to in_be32 and out_be32 macros
12988     Fix missing header in io.h
12989
12990     Signed-off-by: Michal Simek <monstr@monstr.eu>
12991     Acked-by: Grant Likely <grant.likely@secretlab.ca>
12992
12993 commit dbf3dfb386a2d5d2381814e39985ab2e21894550
12994 Author: Marcel Ziswiler <marcel@ziswiler.com>
12995 Date:   Fri Jul 11 02:39:14 2008 +0200
12996
12997     Enable passing of ATAGs required by latest Linux kernel.
12998
12999 commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
13000 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13001 Date:   Fri Jul 11 10:24:15 2008 -0400
13002
13003     Fix integer overflow warning in calc_divisor()
13004
13005     which happened when rounding the serial port clock divisor
13006
13007     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13008
13009 commit 6b760189d77f001684e3160b355c185ca3804961
13010 Author: Marcel Ziswiler <marcel@ziswiler.com>
13011 Date:   Fri Jul 11 01:09:59 2008 +0200
13012
13013     Fix build time warnings in function mmc_decode_csd()
13014
13015     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13016
13017 commit c15947d6ce0d59925c97fdfac692476af6e262d0
13018 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13019 Date:   Thu Jul 10 10:46:33 2008 -0400
13020
13021     ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
13022
13023     caused by missing dcache status/enable/disable functions.
13024
13025     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13026
13027 commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
13028 Author: Stefan Roese <sr@denx.de>
13029 Date:   Thu Jul 10 13:53:31 2008 +0200
13030
13031     ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
13032
13033     This patch removes some ft_board_setup() functions from some 4xx boards.
13034     This can be done since we now have a default weak implementation for this
13035     in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
13036     implementation like canyonlands need their own version.
13037
13038     Signed-off-by: Stefan Roese <sr@denx.de>
13039
13040 commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
13041 Author: Wolfgang Denk <wd@denx.de>
13042 Date:   Sun Jul 13 14:58:16 2008 +0200
13043
13044     Add last known maintainer for orphaned boards; reformat.
13045
13046     Signed-off-by: Wolfgang Denk <wd@denx.de>
13047
13048 commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
13049 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13050 Date:   Thu Jul 10 13:16:04 2008 +0200
13051
13052     Remove kharris@nexus-tech.net from MAINTAINERS
13053
13054     Mail to kharris@nexus-tech.net bounces because the user doesn't exist
13055     anymore. You can't be a maintainer without a valid e-mail address, so
13056     move all boards that used to be maintained by Kyle Harris to the
13057     "orphaned" list.
13058
13059     Currently, only PowerPC has a list of orphaned boards, so this patch
13060     creates one for ARM as well.
13061
13062     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13063
13064 commit 17bd17071463b0cde391ac4a0863d600474b4ea1
13065 Author: Anatolij Gustschin <agust@denx.de>
13066 Date:   Thu Jul 10 01:15:10 2008 +0200
13067
13068     at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
13069
13070     On the at91sam9260ep development board there is an EEPROM
13071     connected to the TWI interface (PA23, PA24 Peripheral A
13072     multiplexing), so we cannot use these pins as ETX2, ETX3.
13073     This patch configures PA10, PA11 pins for ETX2, ETX3
13074     instead of PA23, PA24 pins.
13075
13076     Signed-off-by: Anatolij Gustschin <agust@denx.de>
13077     Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
13078
13079 commit f889265753ddf4465d9d580827bb9289bfac55d6
13080 Author: Kenneth Johansson <kenneth@southpole.se>
13081 Date:   Sat Jul 12 13:18:34 2008 -0600
13082
13083     fix DIU for small screens
13084
13085     The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
13086     so it was not possible to set a slow pixel clock and thus prevented
13087     display on small screens.
13088
13089     Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
13090     Acked-by: John Rigby <jrigby@freescale.com>
13091
13092 commit b60b8573875e650e4c69be667bfc88d3ed474a7c
13093 Author: John Rigby <jrigby@freescale.com>
13094 Date:   Fri Jul 11 14:44:09 2008 -0600
13095
13096     ADS5121 cleanup compile warnings
13097
13098     board/ads5121/iopin.c
13099         Replace bit fields in struct iopin_t with a single
13100         field and intialize it via plain old macros.
13101         This fixes the type pun warnings and makes the code
13102         more readable.
13103
13104     board/ads5121/ads5121.c
13105         Add include iopin.h to ads5121.c for the iopin_initialize
13106         prototype.
13107
13108         Add an extern void ads5121_diu_init(void)
13109
13110     Signed-off-by: John Rigby <jrigby@freescale.com>
13111
13112 commit bde63587622c4b830a27d1ddf7265843de9e994f
13113 Author: Wolfgang Denk <wd@denx.de>
13114 Date:   Fri Jul 11 22:56:11 2008 +0200
13115
13116     Fix some more printf() format issues.
13117
13118     Signed-off-by: Wolfgang Denk <wd@denx.de>
13119
13120 commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
13121 Author: Wolfgang Denk <wd@denx.de>
13122 Date:   Fri Jul 11 22:55:31 2008 +0200
13123
13124     Fixed some out-of-tree build issues
13125
13126     Signed-off-by: Wolfgang Denk <wd@denx.de>
13127
13128 commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
13129 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13130 Date:   Wed Jul 9 16:20:23 2008 -0500
13131
13132     ColdFire: Fix FB CS not setup properly for Mcf5282
13133
13134     Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
13135     CFG_CSn_RO is defined as 0, the chipselect will not
13136     be assigned.
13137
13138     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13139
13140 commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
13141 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13142 Date:   Wed Jul 9 15:47:27 2008 -0500
13143
13144     ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
13145
13146     Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
13147     clock module in cpu/<cf arch>/cpu_init.c
13148
13149     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13150
13151 commit f94945b517f10e01927101679c62361e03d4e837
13152 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13153 Date:   Wed Jul 9 15:25:01 2008 -0500
13154
13155     ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
13156
13157     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13158
13159 commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
13160 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13161 Date:   Wed Jul 9 15:21:44 2008 -0500
13162
13163     Fix compile error caused by missing timer function
13164
13165     Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
13166
13167     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13168
13169 commit c37ea031175b807c54e6bad9b270e9bede6c0078
13170 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13171 Date:   Wed Jul 9 15:14:25 2008 -0500
13172
13173     Fix compile error caused by incorrect function return type
13174
13175     Rename int mii_init(void) to void mii_init(void)
13176
13177     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13178
13179 commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
13180 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13181 Date:   Wed Jun 18 19:27:23 2008 -0500
13182
13183     ColdFire: Fix power up issue for MCF5235
13184
13185     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13186
13187 commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
13188 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13189 Date:   Wed Jun 18 19:19:07 2008 -0500
13190
13191     ColdFire: Fix compiling error for MCF5275
13192
13193     The compiling error was caused by missing a closed parentheses
13194     in speed.c
13195
13196     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13197
13198 commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
13199 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13200 Date:   Wed Jun 18 19:14:01 2008 -0500
13201
13202     ColdFire: Fix timer issue for MCF5272
13203
13204     The timer was assigned to wrong timer memory mapped which
13205     caused udelay() and timer() not working properly.
13206
13207     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13208
13209 commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
13210 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13211 Date:   Wed Jun 18 19:12:13 2008 -0500
13212
13213     ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
13214
13215     Signed-off-by: Kurt Mahan <kmahan@freescale.com>
13216
13217 commit 8371dc2066136be21e10b7b9293e469297d77298
13218 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13219 Date:   Wed Jun 18 19:05:23 2008 -0500
13220
13221     ColdFire: Add -got=single param for new linux v4e toolchains
13222
13223     Signed-off-by: Kurt Mahan <kmahan@freescale.com>
13224
13225 commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
13226 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13227 Date:   Wed Jun 18 13:21:19 2008 -0500
13228
13229     ColdFire: Fix code flash configuration for M547x/M548x boards
13230
13231     Signed-off-by: Kurt Mahan <kmahan@freescale.com>
13232
13233 commit 6e37091afc07fdcc15590093fd066b0cb7399f85
13234 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13235 Date:   Tue Jun 24 12:12:16 2008 -0500
13236
13237     ColdFire: Fix warning messages by passing correct data type in board.c
13238
13239     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13240
13241 commit 81cc32322acb1b3225ee45606ced48e2a14824dc
13242 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13243 Date:   Thu May 29 12:21:54 2008 -0500
13244
13245     ColdFire: Fix UART baudrate formula
13246
13247     The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
13248     can generate the wrong divisor due to integer division truncation.
13249     Round the calculated divisor value by adding 1/2 the baudrate
13250     before dividing by the baudrate.
13251
13252     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13253     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
13254
13255 commit b578fb471444cbd7db1285701ba51343baaf73fb
13256 Author: Stefan Roese <sr@denx.de>
13257 Date:   Thu Jul 10 11:38:26 2008 +0200
13258
13259     ppc4xx: Fix include sequence in 4xx_pcie.c
13260
13261     This patch now moves common.h to the top of the inlcude list. This
13262     is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
13263     the phys_size_t/phys_addr_t are defined to the correct size in this
13264     driver.
13265
13266     Signed-off-by: Stefan Roese <sr@denx.de>
13267
13268 commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
13269 Author: Stefan Roese <sr@denx.de>
13270 Date:   Fri Jul 11 13:10:56 2008 +0200
13271
13272     ppc4xx: Fix compile warning in 44x_spd_ddr2.c
13273
13274     Signed-off-by: Stefan Roese <sr@denx.de>
13275
13276 commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
13277 Author: Stefan Roese <sr@denx.de>
13278 Date:   Fri Jul 11 11:40:13 2008 +0200
13279
13280     ppc4xx: Fix small korat merge problem
13281
13282     Signed-off-by: Stefan Roese <sr@denx.de>
13283
13284 commit 1d0554736a0a1dd59718acda660871ce56b69e18
13285 Author: Stefan Roese <sr@denx.de>
13286 Date:   Fri Jul 11 11:34:52 2008 +0200
13287
13288     ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
13289
13290     Signed-off-by: Stefan Roese <sr@denx.de>
13291
13292 commit 3a82113ed5934d498f25080441a8261fc9454b15
13293 Author: Stefan Roese <sr@denx.de>
13294 Date:   Thu Jul 10 16:37:09 2008 +0200
13295
13296     ppc4xx: Add 460SX UIC defines
13297
13298     Only the really needed ones are added (cascading and EMAC/MAL).
13299
13300     Signed-off-by: Stefan Roese <sr@denx.de>
13301
13302 commit 26173fc6f60521c2a8072f652f863617fc11ba9a
13303 Author: Stefan Roese <sr@denx.de>
13304 Date:   Mon Jun 30 14:11:07 2008 +0200
13305
13306     ppc4xx: Continue cleanup of ppc440.h
13307
13308     This patch continues the ppc440.h cleanup by removing some of the unused
13309     defines.
13310
13311     Signed-off-by: Stefan Roese <sr@denx.de>
13312
13313 commit d9056b7913ed6a228d2f33671d916efedee541dd
13314 Author: Stefan Roese <sr@denx.de>
13315 Date:   Mon Jun 30 14:05:05 2008 +0200
13316
13317     ppc4xx: Cleanup Katmai & Yucca PCIe register usage
13318
13319     This patch cleans up the 440SPe PCIe register usage. Now only defines
13320     from the include/asm-ppc/4xx_pcie.h are used.
13321
13322     Signed-off-by: Stefan Roese <sr@denx.de>
13323
13324 commit 5de851403b01489b493fa83137ad990b8ce60d1c
13325 Author: Stefan Roese <sr@denx.de>
13326 Date:   Thu Jun 26 17:36:39 2008 +0200
13327
13328     ppc4xx: Rework 440GX UIC handling
13329
13330     This patch reworks the 440GX interrupt handling so that the common 4xx
13331     code can be used. The 440GX is an exception to all other 4xx variants
13332     by having the cascading interrupt vectors not on UIC0 but on a special
13333     UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
13334     the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
13335     handling is simpler without any 440GX special cases.
13336
13337     Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
13338
13339     Signed-off-by: Stefan Roese <sr@denx.de>
13340
13341 commit d1631fe1a05b063ccaf62ea892a8887b829847d1
13342 Author: Stefan Roese <sr@denx.de>
13343 Date:   Thu Jun 26 13:40:57 2008 +0200
13344
13345     ppc4xx: Consolidate PPC4xx UIC defines
13346
13347     This 2nd patch now removes all UIC mask bit definition. They should be
13348     generated from the vectors by using the UIC_MASK() macro from now on.
13349     This way only the vectors need to get defined for new PPC's.
13350
13351     Also only the really used interrupt vectors are now defined. This makes
13352     definitions for new PPC versions easier and less error prone.
13353
13354     Another part of this patch is that the 4xx emac driver got a little
13355     cleanup, since now the usage of the interrupts is clearer.
13356
13357     Signed-off-by: Stefan Roese <sr@denx.de>
13358
13359 commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
13360 Author: Stefan Roese <sr@denx.de>
13361 Date:   Wed Jun 25 10:59:22 2008 +0200
13362
13363     ppc4xx: Consolidate PPC4xx UIC defines
13364
13365     This patch is the first step to consolidate the UIC related defines in the
13366     4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
13367     asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
13368     steps.
13369
13370     Signed-off-by: Stefan Roese <sr@denx.de>
13371
13372 commit 7ee2619c20ccecd57966d74d844e6329e141261c
13373 Author: Stefan Roese <sr@denx.de>
13374 Date:   Tue Jun 24 17:18:50 2008 +0200
13375
13376     ppc4xx: Consolidate PPC4xx EBC defines
13377
13378     This patch removes all EBC related defines from the PPC4xx headers
13379     ppc405.h and ppc440.h and introduces a new header
13380
13381     include/asm-ppc/ppc4xx-ebc.h
13382
13383     with all those defines.
13384
13385     Signed-off-by: Stefan Roese <sr@denx.de>
13386
13387 commit e321801bed5a6d896d298c00fd20046f039d5d66
13388 Author: Stefan Roese <sr@denx.de>
13389 Date:   Thu Jul 10 13:52:44 2008 +0200
13390
13391     ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
13392
13393     This patch removes some ft_board_setup() functions from some 4xx boards.
13394     This can be done since we now have a default weak implementation for this
13395     in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
13396     implementation like canyonlands need their own version.
13397
13398     Signed-off-by: Stefan Roese <sr@denx.de>
13399
13400 commit 08250eb2edbd96514d049602d9e134110ac3185f
13401 Author: Stefan Roese <sr@denx.de>
13402 Date:   Thu Jul 10 15:32:32 2008 +0200
13403
13404     ppc4xx: Fix merge problems in 44x_spd_ddr2.c
13405
13406     Signed-off-by: Stefan Roese <sr@denx.de>
13407
13408 commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
13409 Author: Grant Erickson <gerickson@nuovations.com>
13410 Date:   Tue Jul 8 08:35:00 2008 -0700
13411
13412     ppc4xx: Add MII mode support to the EMAC RGMII Bridge
13413
13414     This patch adds support for placing the RGMII bridge on the
13415     PPC405EX(r) into MII/GMII mode and allows a board-specific
13416     configuration to specify the bridge mode at compile-time.
13417
13418     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13419     Signed-off-by: Stefan Roese <sr@denx.de>
13420
13421 commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
13422 Author: Grant Erickson <gerickson@nuovations.com>
13423 Date:   Wed Jul 9 16:46:35 2008 -0700
13424
13425     ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
13426
13427     This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
13428     controller registers (MODT and INITPLR) used by the
13429     PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
13430     peer values used for the INITPLR MR and EMR registers,
13431     respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
13432
13433     With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
13434     Kilauea are replaced by equivalent mnemonics to make it easier to
13435     compare and contrast other 405EX(r)-based boards (e.g. during board
13436     bring-up).
13437
13438     Finally, unified the SDRAM controller register dump routine such that
13439     it can be used across all processor variants that utilize the IBM DDR2
13440     SDRAM controller core. It produces output of the form:
13441
13442         PPC4xx IBM DDR2 Register Dump:
13443                 ...
13444                 SDRAM_MB0CF[40] = 0x00006701
13445                 ...
13446
13447     which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
13448     since it is not uncommon that the DCR values in header files get mixed
13449     up and it helps to validate, at a glance, they match what is printed
13450     in the user manual.
13451
13452     Tested on:
13453       AMCC Kilauea/Haleakala:
13454       - NFS Linux Boot: PASSED
13455       - NAND Linux Boot: PASSED
13456
13457     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13458     Signed-off-by: Stefan Roese <sr@denx.de>
13459
13460 commit ad7382d828982e9c1bafc4313ef1b666f6145f58
13461 Author: Grant Erickson <gerickson@nuovations.com>
13462 Date:   Wed Jul 9 16:31:59 2008 -0700
13463
13464     ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
13465
13466     Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
13467     revision ID DCR based on 405EX, and add field mnemonics for bus error
13468     status and ECC error status registers.
13469
13470     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13471     Signed-off-by: Stefan Roese <sr@denx.de>
13472
13473 commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
13474 Author: Grant Erickson <gerickson@nuovations.com>
13475 Date:   Wed Jul 9 16:31:36 2008 -0700
13476
13477     ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
13478
13479     This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
13480
13481     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13482     Signed-off-by: Stefan Roese <sr@denx.de>
13483
13484 commit 5b457d00730d4aa0c6450d21a9104723e606fb98
13485 Author: Grant Erickson <gerickson@nuovations.com>
13486 Date:   Wed Jul 9 11:55:46 2008 -0700
13487
13488     PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
13489
13490     While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
13491     controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
13492     the 405EX(r), SDRAM_MCSTAT has a different DCR value.
13493
13494     Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
13495     which causes SDRAM initialization to periodically fail since it can
13496     prematurely indicate SDRAM ready status.
13497
13498     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13499     Signed-off-by: Stefan Roese <sr@denx.de>
13500
13501 commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
13502 Author: Feng Kan <fkan@amcc.com>
13503 Date:   Tue Jul 8 22:48:42 2008 -0700
13504
13505     ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
13506
13507     Add AMCC Redwood reference board that uses the latest
13508     PPC 464 CPU processor combined with a rich mix of peripheral
13509     controllers. The board will support PCIe, mutiple Gig ethernet
13510     ports, advanced hardware RAID assistance and IEEE 1588.
13511
13512     Signed-off-by: Feng Kan <fkan@amcc.com>
13513     Signed-off-by: Stefan Roese <sr@denx.de>
13514
13515 commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
13516 Author: Feng Kan <fkan@amcc.com>
13517 Date:   Tue Jul 8 22:48:07 2008 -0700
13518
13519     ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
13520
13521     Signed-off-by: Feng Kan <fkan@amcc.com>
13522     Signed-off-by: Stefan Roese <sr@denx.de>
13523
13524 commit 7d30793685efcada183891c78fc892e6c9ba50c7
13525 Author: Feng Kan <fkan@amcc.com>
13526 Date:   Tue Jul 8 22:47:31 2008 -0700
13527
13528     ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
13529
13530     Signed-off-by: Feng Kan <fkan@amcc.com>
13531     Signed-off-by: Stefan Roese <sr@denx.de>
13532
13533 commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
13534 Author: Wolfgang Denk <wd@denx.de>
13535 Date:   Fri Jul 11 01:16:00 2008 +0200
13536
13537     Fix some more print() format errors.
13538
13539     Signed-off-by: Wolfgang Denk <wd@denx.de>
13540
13541 commit fdd70d1921b87287d9a99d1be99bc35226c2b412
13542 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13543 Date:   Thu Jul 10 20:57:54 2008 +0200
13544
13545     MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
13546
13547     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13548
13549 commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
13550 Author: Sergey Lapin <slapin@ossfans.org>
13551 Date:   Thu Jun 5 11:06:29 2008 +0400
13552
13553     DataFlash AT45DB021 support
13554
13555     Some boards based on AT91SAM926X-EK use smaller DF chips to keep
13556     bootstrap, u-boot and its environment, using NAND or other external
13557     storage for kernel and rootfs. This patch adds support for
13558     small 1024x263 chip.
13559
13560     Signed-off-by: Sergey Lapin <slapin@ossfans.org>
13561
13562 commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
13563 Author: Kim Phillips <kim.phillips@freescale.com>
13564 Date:   Thu Jul 10 14:00:15 2008 -0500
13565
13566     silence misc printf formatting compiler warnings
13567
13568     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13569
13570 commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
13571 Author: Markus Klotzbücher <mk@denx.de>
13572 Date:   Thu Jul 10 14:47:09 2008 +0200
13573
13574     USB: shutdown USB before booting
13575
13576     This patch fixes a potentially serious issue related to USB which was
13577     discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
13578     ARM920T. Martin wrote:
13579
13580       Turn off USB to prevent the host controller from writing to the
13581       SDRAM while Linux is booting. This could happen, because the HCCA
13582       (Host Controller Communication Area) lies within the SDRAM and the
13583       host controller writes continously to this area (as busmaster!), for
13584       example to increase the HccaFrameNumber variable, which happens
13585       every 1 ms.
13586
13587     This is a slightly modified version of the patch in order to shutdown
13588     USB when booting on all architectures.
13589
13590     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
13591
13592 commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
13593 Author: Martha Marx <mmarx@silicontkx.com>
13594 Date:   Thu May 29 14:23:25 2008 -0400
13595
13596     Configuration changes for ADS5121 Rev 3
13597
13598     ADS5121 Rev 3 board is now the default config
13599
13600     config targets are now
13601
13602     ads5121_config
13603         Rev 3 board with
13604         PCI
13605         M41T62 on board RTC
13606         512MB DRAM
13607
13608     ads5121_rev2_config
13609         Rev 2 board with
13610         No PCI
13611         256MB DRAM
13612
13613     Signed-off-by: Martha Marx <mmarx@silicontkx.com>
13614     Acked-by: Grant Likely <grant.likely@secretlab.ca>
13615     Acked-by: John Rigby <jrigby@freescale.com>
13616
13617 commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
13618 Author: Martha Marx <mmarx@silicontkx.com>
13619 Date:   Thu May 29 15:37:21 2008 -0400
13620
13621     Consolidate ADS5121 IO Pin configuration
13622
13623     Consolidate ADS5121 IO Pin configuration to one file
13624     board/ads5121/iopin.c.
13625
13626     Remove pin config from cpu/mpc512x/fec.c
13627
13628     Signed-off-by: Martha Marx <mmarx@silicontkx.com>
13629     Acked-by: Grant Likely <grant.likely@secretlab.ca>
13630     Acked-by: John Rigby <jrigby@freescale.com>
13631
13632 commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
13633 Author: Christian Eggers <christian@p2400.wgnetz.xx>
13634 Date:   Fri Jun 27 19:46:51 2008 +0200
13635
13636     Fix "usb part" command
13637
13638     Only print partition for selected device if user supplied the <dev>
13639     arg with the "usb part [dev]" command.
13640
13641     Signed-off-by: Christian Eggers <ceggers@gmx.de>
13642     Acked-by: Markus Klotzbuecher <mk@denx.de>
13643
13644 commit cc83b27217f7380041fea386ddb6d6d9b261617d
13645 Author: Harald Welte <laforge@gnumonks.org>
13646 Date:   Mon Jul 7 00:58:05 2008 +0800
13647
13648     fix USB devices with multiple configurations
13649
13650     This patch fixes bugs in usbdcore*.c related to the use of devices
13651     with multiple configurations.
13652
13653     The original code made mistakes about the meaning of configuration value and
13654     configuration index, and the resulting off-by-one errors resulted in:
13655
13656     * SET_CONFIGURATION always selected the first configuration, no matter what
13657       wValue is being passed.
13658     * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
13659       configuration (index 0).
13660
13661     Signed-off-by: Harald Welte <laforge@openmoko.org>
13662     Acked-by: Markus Klotzbuecher <mk@denx.de>
13663
13664 commit 06c53beae1a726e707971c555613f09b270a2461
13665 Author: Wolfgang Denk <wd@denx.de>
13666 Date:   Thu Jul 10 13:16:09 2008 +0200
13667
13668     Fix some more print() format errors.
13669
13670     Signed-off-by: Wolfgang Denk <wd@denx.de>
13671
13672 commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
13673 Author: Christian Eggers <christian@p2400.wgnetz.xx>
13674 Date:   Fri Jun 27 19:46:51 2008 +0200
13675
13676     Fix "usb part" command
13677
13678     Only print partition for selected device if user supplied the <dev>
13679     arg with the "usb part [dev]" command.
13680
13681     Signed-off-by: Christian Eggers <ceggers@gmx.de>
13682     Acked-by: Markus Klotzbuecher <mk@denx.de>
13683
13684 commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
13685 Author: Harald Welte <laforge@gnumonks.org>
13686 Date:   Mon Jul 7 00:58:05 2008 +0800
13687
13688     fix USB devices with multiple configurations
13689
13690     This patch fixes bugs in usbdcore*.c related to the use of devices
13691     with multiple configurations.
13692
13693     The original code made mistakes about the meaning of configuration value and
13694     configuration index, and the resulting off-by-one errors resulted in:
13695
13696     * SET_CONFIGURATION always selected the first configuration, no matter what
13697       wValue is being passed.
13698     * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
13699       configuration (index 0).
13700
13701     Signed-off-by: Harald Welte <laforge@openmoko.org>
13702     Acked-by: Markus Klotzbuecher <mk@denx.de>
13703
13704 commit e870690bdca154943ecadd5212d2d59c1b9d391b
13705 Author: Stefan Roese <sr@denx.de>
13706 Date:   Thu Jul 10 10:10:54 2008 +0200
13707
13708     MTD/NAND: Fix printf format warning in nand code
13709
13710     This patch fixes NAND related printf format warning. Those warnings are
13711     now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
13712     [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
13713     really helpful.
13714
13715     Signed-off-by: Stefan Roese <sr@denx.de>
13716
13717 commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
13718 Author: Stefan Roese <sr@denx.de>
13719 Date:   Thu Jul 10 10:00:45 2008 +0200
13720
13721     rtc: Fix printf format warning in m41t60.c
13722
13723     Signed-off-by: Stefan Roese <sr@denx.de>
13724
13725 commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
13726 Author: Stefan Roese <sr@denx.de>
13727 Date:   Tue Jul 8 12:01:47 2008 +0200
13728
13729     pci: Move PCI device configuration check into a separate weak function
13730
13731     This patch moves the check, if a device should be skipped in PCI PNP
13732     configuration into the function pci_skip_dev(). This function is defined
13733     as weak so that it can be overwritten by a platform specific one if
13734     needed. The check if the device should get printed in the PCI summary upon
13735     bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
13736     pci_print_dev() which is also defined as weak too.
13737
13738     Signed-off-by: Stefan Roese <sr@denx.de>
13739
13740 commit b002144e1dc21374b1ef5281fe6b5d014af96650
13741 Author: Stefan Roese <sr@denx.de>
13742 Date:   Thu Jul 10 09:58:06 2008 +0200
13743
13744     ppc4xx: Fix printf format warnings now visible with the updated format check
13745
13746     This patch fixes ppc4xx related printf format warning. Those warnings are
13747     now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
13748     [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
13749     really helpful.
13750
13751     Signed-off-by: Stefan Roese <sr@denx.de>
13752
13753 commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
13754 Author: Stefan Roese <sr@denx.de>
13755 Date:   Wed Jul 9 17:33:57 2008 +0200
13756
13757     ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
13758
13759     Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
13760     To support such configurations, we "only" map the first 2GB via the TLB's. We
13761     need some free virtual address space for the remaining peripherals like, SoC
13762     devices, FLASH etc.
13763
13764     Note that ECC is currently not supported on configurations with more than 2GB
13765     SDRAM. This is because we only map the first 2GB on such systems, and therefore
13766     the ECC parity byte of the remaining area can't be written.
13767
13768     Signed-off-by: Stefan Roese <sr@denx.de>
13769
13770 commit cf1c2ed91df26903b956948f37f82de9e1158a89
13771 Author: Larry Johnson <lrj@acm.org>
13772 Date:   Sat Jun 14 17:02:49 2008 -0400
13773
13774     ppc4xx: Remove implementation of testdram() from Korat board support
13775
13776     Signed-off-by: Larry Johnson <lrj@acm.org>
13777     Signed-off-by: Stefan Roese <sr@denx.de>
13778
13779 commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
13780 Author: Larry Johnson <lrj@acm.org>
13781 Date:   Sat Jun 14 16:53:02 2008 -0400
13782
13783     ppc4xx: Update and add FDT to Korat board support
13784
13785     Signed-off-by: Larry Johnson <lrj@acm.org>
13786     Signed-off-by: Stefan Roese <sr@denx.de>
13787
13788 commit 4188f0491886b3b486164e819c0a83fdb97efd7d
13789 Author: Wolfgang Denk <wd@denx.de>
13790 Date:   Thu Jul 10 01:13:30 2008 +0200
13791
13792     Minor coding style cleanup; update CHANGELOG
13793
13794     Signed-off-by: Wolfgang Denk <wd@denx.de>
13795
13796 commit 8915f1189c1d29d8be7f4de325702d90a8988219
13797 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
13798 Date:   Wed Jul 9 17:50:45 2008 -0400
13799
13800     e1000: add support for 82545GM 64bit PCI-X copper variant
13801
13802     This PCI-X e1000 variant works by just adding in the correct
13803     PCI IDs in the appropriate places.
13804
13805     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
13806
13807 commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
13808 Author: Daniel Hellstrom <daniel@gaisler.com>
13809 Date:   Wed Jul 9 12:34:11 2008 +0000
13810
13811     SPARC: Build error fix
13812
13813     (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
13814
13815     This patch makes SPARC targets build again. It is caused by
13816     phys_addr_t and phys_size_t being defined in the wrong header
13817     file. include/lmb.h need those typedefs to build.
13818
13819     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
13820
13821 commit 11ccc33fa21acce108f6b4a6936e3271af904c64
13822 Author: Marcel Ziswiler <marcel@ziswiler.com>
13823 Date:   Wed Jul 9 08:17:15 2008 +0200
13824
13825     Many spelling fixes in README.
13826
13827     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13828
13829 commit dbab0691d2533560f7e91b92ae844046a9ad1df3
13830 Author: Marcel Ziswiler <marcel@ziswiler.com>
13831 Date:   Wed Jul 9 08:17:06 2008 +0200
13832
13833     Minor spelling fix in comment.
13834
13835     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13836
13837 commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
13838 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13839 Date:   Tue Jul 8 14:54:58 2008 -0400
13840
13841     Round the serial port clock divisor value returned by calc_divisor()
13842
13843     Round the serial port clock divisor value returned by
13844     calc_divisor().
13845
13846     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13847     Signed-off-by: John Roberts <john.roberts@pwav.com>
13848
13849 commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
13850 Author: Scott Wood <scottwood@freescale.com>
13851 Date:   Wed Jul 9 17:47:52 2008 -0500
13852
13853     NAND: ifdef-protect most of nand.h when using legacy NAND.
13854
13855     Some macros such as NAND_CTL_SETALE conflict between current and legacy
13856     NAND, being defined by the subsystem in the former case and the board
13857     config file in the latter.
13858
13859     Signed-off-by: Scott Wood <scottwood@freescale.com>
13860
13861 commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
13862 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13863 Date:   Tue Jul 8 11:02:05 2008 -0400
13864
13865     ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
13866
13867     ARM: Fix for incorrect version of patch applied when
13868     adding support for the Lyrtech SFF-SDR board.
13869
13870     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
13871     Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
13872
13873 commit 47042b363ee5022b8180c65d3f4558e7972c79cd
13874 Author: Kyungmin Park <kmpark@infradead.org>
13875 Date:   Tue Jul 8 09:08:40 2008 +0900
13876
13877     Remove useless print message at apollon
13878
13879     Remove useless print message at apollon
13880
13881     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
13882
13883 commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
13884 Author: Andy Fleming <afleming@freescale.com>
13885 Date:   Mon Jul 7 14:24:39 2008 -0500
13886
13887     Fix LMB type issues
13888
13889     The LMB code now uses phys_addr_t and phys_size_t.  Also, there were a couple
13890     of casting problems in the bootm code that called the LMB functions.
13891
13892     Signed-off-by: Andy Fleming <afleming@freescale.com>
13893
13894 commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
13895 Author: Kumar Gala <galak@kernel.crashing.org>
13896 Date:   Mon Jul 7 09:39:06 2008 -0500
13897
13898     Fix compiler warnings
13899
13900     gcc-4.3.x generates the following:
13901
13902     bootm.c: In function 'do_bootm_linux':
13903     bootm.c:208: warning: cast from pointer to integer of different size
13904     bootm.c:215: warning: cast from pointer to integer of different size
13905
13906     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13907
13908 commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
13909 Author: Harald Welte <laforge@gnumonks.org>
13910 Date:   Mon Jul 7 15:40:39 2008 +0800
13911
13912     Remove code duplication for setting the default environment
13913
13914     common/env_common.c (default_env): new function that resets the environment to
13915                     the default value
13916     common/env_common.c (env_relocate): use default_env instead of own copy
13917     common/env_nand.c (env_relocate_spec): use default_env instead of own copy
13918     include/environment.h: added default_env prototype
13919
13920     Signed-off-by: Werner Almesberger <werner@openmoko.org>
13921     Signed-off-by: Harald Welte <laforge@openmoko.org>
13922
13923 commit 99c2b434d37863df5dda5207a53760c6506fc2be
13924 Author: Marcel Ziswiler <marcel@ziswiler.com>
13925 Date:   Sun Jun 22 16:13:46 2008 +0200
13926
13927     NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
13928
13929     The writeenv() and readenv() calls introduced by the recently added bad block
13930     management for environment variables were missing casts therefore producing
13931     compile time warnings.
13932     While at it fixing some typo in a comment and indentation.
13933
13934     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13935     Signed-off-by: Scott Wood <scottwood@freescale.com>
13936
13937 commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
13938 Author: Scott Wood <scottwood@freescale.com>
13939 Date:   Fri Jun 20 12:38:57 2008 -0500
13940
13941     NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
13942
13943     This is particularly problematic now that non-NAND-specific code is
13944     including <nand.h>, and thus all debugging code is being compiled
13945     regardless of whether it was requested, as reported by Scott McNutt
13946     <smcnutt@psyent.com>.
13947
13948     Signed-off-by: Scott Wood <scottwood@freescale.com>
13949
13950 commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
13951 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13952 Date:   Thu Jun 12 19:27:58 2008 +0200
13953
13954     mmc: Move atmel_mci driver into drivers/mmc
13955
13956     This makes it easier to use the driver on other platforms.
13957
13958     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13959     Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13960
13961 commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
13962 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13963 Date:   Thu Jun 12 19:27:57 2008 +0200
13964
13965     avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
13966
13967     After we move the atmel_mci driver into drivers/mmc, we can't select
13968     it with CONFIG_MMC anymore. Introduce a new symbol specifically for
13969     this driver so that there's no ambiguity.
13970
13971     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13972     Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13973
13974 commit 5ce13051a48c62bda9723df3b4778c492fb47f36
13975 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13976 Date:   Thu Jun 12 19:27:56 2008 +0200
13977
13978     Create drivers/mmc subdirectory
13979
13980     In order to consolidate more of the various MMC drivers around the
13981     tree, we must first have a common place to put them.
13982
13983     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
13984     Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13985
13986 commit b502611b51f02718c2d1117d4981dabceb5af6de
13987 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
13988 Date:   Sun Jul 6 12:30:09 2008 +0200
13989
13990     Change env_get_char from a global function ptr to a function
13991
13992     This avoids an early global data reference.
13993
13994     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
13995
13996 commit 27269417ade432189b234d9fbac98b54e37b978c
13997 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
13998 Date:   Sun Jul 6 13:57:58 2008 +0400
13999
14000     Some copy-n-paste fixes in printf usage
14001
14002     Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
14003
14004 commit 0e6989b9faf1588e8723535539e88a0df3c71356
14005 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
14006 Date:   Sun Jul 6 13:57:00 2008 +0400
14007
14008     FDT memory and pci node fixes for MPC8260ADS
14009
14010     Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
14011
14012 commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
14013 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
14014 Date:   Mon Jul 7 06:41:14 2008 -0700
14015
14016     Fix printf errors.
14017
14018     The compiler will help find mismatches between printf formats and
14019     arguments if you let it.  This patch adds the necessary attributes to
14020     declarations in include/common.h, then begins to correct the resulting
14021     compiler warnings.  Some of these were bugs, e.g., "$d" instead of
14022     "%d" and incorrect arguments.  Others were just annoying, like
14023     int-long mismatches on a system where both are 32 bits.  It's worth
14024     fixing the annoying errors to catch the real ones.
14025
14026     Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
14027
14028 commit 417faf285b2527acb2de24c5cd3e2621d385408c
14029 Author: Becky Bruce <becky.bruce@freescale.com>
14030 Date:   Wed Jul 9 11:09:41 2008 -0500
14031
14032     Allow print_size to print in GB
14033
14034     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14035
14036 commit e7c374529c87525c9aa463e0557c287887ae4e9e
14037 Author: Jason McMullan <mcmullan@netapp.com>
14038 Date:   Sun Jun 8 23:56:00 2008 -0400
14039
14040     mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
14041
14042     Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
14043     they are set in the U-Boot environment.
14044
14045     Signed-off-by: Jason McMullan <mcmullan@netapp.com>
14046     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14047
14048 commit 0192d7d56e9320819dea262f49789ae18fdd2c72
14049 Author: Stefan Roese <sr@denx.de>
14050 Date:   Tue Jul 8 12:57:14 2008 +0200
14051
14052     jedec_flash: Fix AM29DL800BB device ID
14053
14054     As pointed out by Jerry Hicks, this patch corrects the device ID of
14055     the Spansion AM29DL800BB NOR device. Verified against latest Spansion
14056     datasheet (rev C4 from Dezember 2006).
14057
14058     Signed-off-by: Stefan Roese <sr@denx.de>
14059
14060 commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
14061 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14062 Date:   Mon Jul 7 11:22:37 2008 +0900
14063
14064     sh: Fix compile error sh7763rdp board
14065
14066     Disable SH ether driver.
14067
14068     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14069
14070 commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
14071 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14072 Date:   Tue Jul 8 12:03:24 2008 +0900
14073
14074     sh: Fix SH-boards compile error
14075
14076     By Cleanup out-or-tree building for some boards (.depend)
14077     (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
14078     because filse ware changed, some SH-boards have compile error.
14079     I revised this problem.
14080
14081     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14082
14083 commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
14084 Author: Jason Jin <Jason.jin@freescale.com>
14085 Date:   Tue May 13 11:50:36 2008 +0800
14086
14087     Feed the watchdog in u-boot for 8610 board.
14088
14089     The watchdog on 8610 board is enabled by setting sw[6]
14090     to on. Once enabled, the watchdog can not be disabled
14091     by software. So feed the dog in u-boot is necessary for
14092     normal operation.
14093
14094     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14095
14096 commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
14097 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
14098 Date:   Wed Jun 18 12:10:33 2008 -0400
14099
14100     Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
14101
14102     Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
14103
14104     Remove duplicate code in a if/else block in
14105     cpu/arm926ejs/davinci/lxt972.c.
14106     Fixed style issues.
14107
14108     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
14109     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14110
14111 commit fec61431a003f5778bafa2624073a571af8bec9f
14112 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
14113 Date:   Wed Jun 18 12:10:31 2008 -0400
14114
14115     Remove duplicate definitions in include/lxt971a.h.
14116
14117     Remove duplicate definitions in include/lxt971a.h.
14118
14119     Remove duplicate registers and bits definitions in
14120     include/lxt971a.h for standard MII registers, and
14121     use values in include/miiphy.h instead.
14122
14123     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
14124     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14125
14126 commit 9751ee0990f467941da0b095a4e995f863672d7a
14127 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14128 Date:   Wed Jun 11 21:05:00 2008 +0900
14129
14130     net: sh: Renesas SH7763 Ethernet device support
14131
14132     Renesas SH7763 has 2 channel Ethernet device.
14133     This is 10/100/1000 Base support.
14134     But this patch check 10/100 Base only.
14135
14136     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14137     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14138
14139 commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
14140 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14141 Date:   Tue Jun 17 16:28:05 2008 +0900
14142
14143     sh: Update Renesas R2DPlus board
14144
14145     New NOR Flash board support and remove old type flash board config.
14146     And Remove network setting from config file.
14147
14148     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14149     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14150
14151 commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
14152 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14153 Date:   Tue Jun 17 16:28:01 2008 +0900
14154
14155     sh: Update Renesas R7780MP board
14156
14157     New NOR Flash board support and remove network setting from config file.
14158
14159     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14160     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14161
14162 commit c001cd604e9f133743effbddb1c215b48e761c5a
14163 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14164 Date:   Tue Jun 17 16:27:56 2008 +0900
14165
14166     sh: Update Renesas Migo-R board
14167
14168     Remove network setting from config file.
14169
14170     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14171     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14172
14173 commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
14174 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14175 Date:   Tue Jun 17 16:27:52 2008 +0900
14176
14177     sh: Update Hitachi MS7722SE board
14178
14179     Remove network setting from config file.
14180
14181     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14182     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14183
14184 commit 26209e48e8791670c93108029a5c31a30016c6df
14185 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14186 Date:   Tue Jun 17 16:27:48 2008 +0900
14187
14188     sh: Cleanup source code of SH7763RDP
14189
14190     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14191     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14192
14193 commit 5cd5b2c96ef0025762931349d350287aec03ab47
14194 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14195 Date:   Tue Jun 17 16:27:44 2008 +0900
14196
14197     sh: Cleanup source code of R2DPlus
14198
14199     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14200     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14201
14202 commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
14203 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14204 Date:   Tue Jun 17 16:27:41 2008 +0900
14205
14206     sh: Cleanup source code of R7780MP
14207
14208     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14209     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14210
14211 commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
14212 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14213 Date:   Tue Jun 17 16:27:38 2008 +0900
14214
14215     sh: Cleanup source code of MS7722SE
14216
14217     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14218     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14219
14220 commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
14221 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14222 Date:   Tue Jun 17 16:27:34 2008 +0900
14223
14224     sh: Cleanup source code of MS7720SE
14225
14226     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14227     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14228
14229 commit 3ab4827cbe409488ebea1a2ee5094783f2672214
14230 Author: Wolfgang Denk <wd@denx.de>
14231 Date:   Mon Jul 7 00:45:03 2008 +0200
14232
14233     SH: fix out of tree building
14234
14235     Signed-off-by: Wolfgang Denk <wd@denx.de>
14236
14237 commit 9047bfa1e737d787be460387dd6f45737eeceb10
14238 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14239 Date:   Thu Jul 3 23:16:06 2008 +0900
14240
14241     net: smc911x: Fix typo
14242
14243     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
14244
14245 commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
14246 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
14247 Date:   Wed Jul 2 18:54:08 2008 +0200
14248
14249     update mvBL-M7 board config
14250
14251     update mvBL-M7 config file to use UBOOT_VERSION and define
14252     CONFIG_HIGH_BATS.
14253
14254     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
14255
14256 commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
14257 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14258 Date:   Mon Jun 30 17:45:01 2008 +0900
14259
14260     net: fix compile problem in smc911x driver.
14261
14262     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14263     Acked-by: Ben Warren <biggerbadderben@gmail.com>
14264
14265 commit 9fea65a6c469b1b474b27446feb58738baba2d31
14266 Author: Michal Simek <monstr@monstr.eu>
14267 Date:   Tue Jun 24 09:54:09 2008 +0200
14268
14269     ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
14270
14271     This change helps with better handling with others
14272     Xilinx based platform.
14273
14274     Signed-off-by: Michal Simek <monstr@monstr.eu>
14275     Acked-by: Stefan Roese <sr@denx.de>
14276
14277 commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
14278 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14279 Date:   Tue Jun 17 13:07:11 2008 +0900
14280
14281     net: ne2000: Move dev_addr variable from grobal to local.
14282
14283     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14284     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14285
14286 commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
14287 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14288 Date:   Tue Jun 17 13:07:15 2008 +0900
14289
14290     net: ne2000: Fix compile error of NE2000
14291
14292     If enable DEBUG, can not compile ne2000 driver.
14293
14294     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14295     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14296
14297 commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
14298 Author: Ben Warren <biggerbadderben@gmail.com>
14299 Date:   Mon Jun 23 22:57:27 2008 -0700
14300
14301     Add mechanisms for CPU and board-specific Ethernet initialization
14302
14303     This patch is the first step in cleaning up net/eth.c, by moving Ethernet
14304     initialization to CPU or board-specific code.  Initial implementation is
14305     only on the Freescale TSEC controller, but others will be added soon.
14306
14307     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14308
14309 commit 7754f2be5d1835d263aad21b5a629526f3e680b0
14310 Author: Wolfgang Denk <wd@denx.de>
14311 Date:   Sun Jul 6 01:21:46 2008 +0200
14312
14313     include/sha256.h: fix file permissions.
14314
14315     Signed-off-by: Wolfgang Denk <wd@denx.de>
14316
14317 commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
14318 Author: Patrice Vilchez <patrice.vilchez@atmel.com>
14319 Date:   Tue May 27 11:15:29 2008 +0200
14320
14321     [AT91SAM9] Fix NAND FLASH timings
14322
14323     Fix NAND FLASH timings for at91sam9x evaluation kits.
14324
14325     New timings are based on application note
14326     "NAND Flash Support on AT91SAM9 Microcontrollers" available at
14327     http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
14328
14329     Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
14330     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14331     Acked-by: Stelian Pop <stelian@popies.net>
14332
14333 commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
14334 Author: Stelian Pop <stelian@popies.net>
14335 Date:   Thu May 22 00:15:40 2008 +0200
14336
14337     Fix boot from NOR due to incorrect reset delay.
14338
14339     AT91 RSTC registers are battery-backuped, so their values
14340     are not reset across power cycles. One of those registers,
14341     the AT91_RSTC_MR register, is being modified by U-Boot, in
14342     the ethernet initialisation routine, to generate a 500ms
14343     user reset.
14344
14345     Unfortunately, this value is not being restored afterwards,
14346     causing subsequent resets to also last for 500ms.
14347
14348     This long reset sequence causes problems (at least) in the
14349     boot sequence from NOR: by the time the CPU tries to load
14350     a program from the NOR flash, the latter is still in reset
14351     and not yet available.
14352
14353     Additionaly, this patch fixes a bug in the original code which
14354     caused the reset delay to last for 2s instead of 500ms.
14355
14356     Signed-off-by: Stelian Pop <stelian@popies.net>
14357     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14358
14359 commit f492dd636fbbae529e17533995bc6e5813c007f6
14360 Author: Wolfgang Denk <wd@denx.de>
14361 Date:   Fri Jul 4 20:11:49 2008 +0200
14362
14363     Update CHANGELOG
14364
14365     Signed-off-by: Wolfgang Denk <wd@denx.de>
14366
14367 commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
14368 Author: Wolfgang Denk <wd@denx.de>
14369 Date:   Fri Jul 4 20:07:35 2008 +0200
14370
14371     CCM/SCM boards: fix out of tree building
14372
14373     Signed-off-by: Wolfgang Denk <wd@denx.de>
14374
14375 commit ab4c3a490df9a964711556d2a05b0c787db45fde
14376 Author: Wolfgang Denk <wd@denx.de>
14377 Date:   Thu Jul 3 23:22:27 2008 +0200
14378
14379     SCM board: fix build errors.
14380
14381     Signed-off-by: Wolfgang Denk <wd@denx.de>
14382
14383 commit a566466f17ba0e2d2b6c250e77da678fb932470d
14384 Author: Wolfgang Denk <wd@denx.de>
14385 Date:   Thu Jul 3 23:06:36 2008 +0200
14386
14387     IAD210 board: fix ``"ALIGN" redefined'' warning.
14388
14389     Signed-off-by: Wolfgang Denk <wd@denx.de>
14390
14391 commit ad756314797c16fa5dca23e115aab881011f164f
14392 Author: Wolfgang Denk <wd@denx.de>
14393 Date:   Thu Jul 3 23:00:24 2008 +0200
14394
14395     CCM board: fix build errors.
14396
14397     Signed-off-by: Wolfgang Denk <wd@denx.de>
14398
14399 commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
14400 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
14401 Date:   Wed Jul 2 18:54:08 2008 +0200
14402
14403     update mvBL-M7 board config
14404
14405     update mvBL-M7 config file to use UBOOT_VERSION.
14406
14407     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
14408     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14409
14410 commit ced209c50e80c25f13c083099b05044048d21f4f
14411 Author: Wolfgang Denk <wd@denx.de>
14412 Date:   Thu Jul 3 22:39:21 2008 +0200
14413
14414     sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
14415
14416     Signed-off-by: Wolfgang Denk <wd@denx.de>
14417
14418 commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
14419 Author: Wolfgang Denk <wd@denx.de>
14420 Date:   Thu Jul 3 22:34:08 2008 +0200
14421
14422     Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
14423
14424     Signed-off-by: Wolfgang Denk <wd@denx.de>
14425
14426 commit 730f298485984b011b6ee8f4acb511cb45a843dd
14427 Author: Wolfgang Denk <wd@denx.de>
14428 Date:   Thu Jul 3 22:04:17 2008 +0200
14429
14430     lmb: fix "implicit declaration of function 'lmb_free'" warning
14431
14432     Signed-off-by: Wolfgang Denk <wd@denx.de>
14433
14434 commit 322ef5e28d2dc62571afc699b00add22a8e006e4
14435 Author: Wolfgang Denk <wd@denx.de>
14436 Date:   Wed Jul 2 23:53:23 2008 +0200
14437
14438     Cleanup: remove redundant deleting on *~ files
14439
14440     Signed-off-by: Wolfgang Denk <wd@denx.de>
14441
14442 commit c8a3b109f07f02342d097b30908965f7261d9f15
14443 Author: Wolfgang Denk <wd@denx.de>
14444 Date:   Wed Jul 2 23:49:18 2008 +0200
14445
14446     Cleanup out-or-tree building for some boards (.depend)
14447
14448     Signed-off-by: Wolfgang Denk <wd@denx.de>
14449
14450 commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
14451 Author: Wolfgang Denk <wd@denx.de>
14452 Date:   Wed Jul 2 23:38:50 2008 +0200
14453
14454     Cleanup: fix out-of-tree building for some boards
14455
14456     Signed-off-by: Wolfgang Denk <wd@denx.de>
14457
14458 commit 461fa68d20861811487944d22291db5a13410e20
14459 Author: Wolfgang Denk <wd@denx.de>
14460 Date:   Wed Jul 2 23:00:14 2008 +0200
14461
14462     Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
14463
14464     Signed-off-by: Wolfgang Denk <wd@denx.de>
14465
14466 commit 5981ebd32017e062b08aa6747cf591276f2db779
14467 Author: Detlev Zundel <dzu@denx.de>
14468 Date:   Fri Jun 20 22:26:24 2008 +0200
14469
14470     fdt: Fix typo in variable name.
14471
14472     Signed-off-by: Detlev Zundel <dzu@denx.de>
14473
14474 commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
14475 Author: Gary Jennejohn <garyj@denx.de>
14476 Date:   Thu Jun 19 11:11:19 2008 +0200
14477
14478     Add logos for RRvision board
14479
14480     Signed-off-by: Gary Jennejohn <garyj@denx.de>
14481
14482 commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
14483 Author: Esben Haabendal <EsbenHaabendal@gmail.com>
14484 Date:   Wed Jun 18 11:03:57 2008 +0200
14485
14486     mpc8260: add fdt_fixup_ethernet support
14487
14488     Add support for updating mac-address and local-mac-address in fdt for
14489     all MPC8260 targets.
14490
14491     Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
14492
14493 commit f6a69559d64498a04e1e0b087a9b920e5775f866
14494 Author: Steven A. Falco <sfalco@harris.com>
14495 Date:   Thu Jun 12 13:24:42 2008 -0400
14496
14497     cmd_nvedit.c: clean up syntax highlighting
14498
14499     My text-editor (vim) has a bit of trouble syntax-highlighting the
14500     cmd_nvedit.c file, because it apparently does not parse C
14501     ifdef/else/endif. The following patch does not change the behavior of
14502     the code at all, but does allow the editor to properly
14503     syntax-highlight the file.
14504
14505     Signed-off-by: Steve Falco <sfalco@harris.com>
14506
14507 commit 75678c807a6272ecc5541eb32898c93887f08400
14508 Author: Steven A. Falco <sfalco@harris.com>
14509 Date:   Thu Jun 12 13:22:12 2008 -0400
14510
14511     Make setenv() return status
14512
14513     Currently, the setenv function does not return an error code.
14514     This patch allows to test for errors.
14515
14516     Signed-off-by: Steve Falco <sfalco@harris.com>
14517
14518 commit 4928e97c8531283ca9b368b7c29a8a12e726562a
14519 Author: Kumar Gala <galak@kernel.crashing.org>
14520 Date:   Wed Jun 11 10:14:06 2008 -0500
14521
14522     PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
14523
14524     fls64, __ilog2_u64, ffs64 are variants that work on an u64,
14525     and fls is used to implement them.
14526
14527     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14528
14529 commit 83002a77cbdf383015ca384eff5fa31722d8e571
14530 Author: Magnus Lilja <lilja.magnus@gmail.com>
14531 Date:   Mon Jun 9 22:58:48 2008 +0200
14532
14533     i.MX31: Cleanup comments in lowlevel_init.S.
14534
14535     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14536
14537 commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
14538 Author: Ben Warren <biggerbadderben@gmail.com>
14539 Date:   Sun Jun 8 23:28:33 2008 -0700
14540
14541     Move conditional compilation of MPC8XXX SPI driver to Makefile
14542
14543     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14544
14545 commit d92ea21bafb674ee2bf27447970b047845e7b0a2
14546 Author: Juergen Kilb <J.Kilb@gmx.de>
14547 Date:   Sun Jun 8 17:59:53 2008 +0200
14548
14549     i.MX31: fixed CTRL-C detection
14550
14551     The Register URXD contains status information in bits [15..8].
14552     With status bit 15 set, CTRL-C was reported as 0x8003 instead
14553     of 0x03. Therefore CTRL-C was not detected.
14554     To solve this, bits [15..8] were masked out now.
14555
14556     Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
14557     Acked-by: Felix Radensky <felix@embedded-sol.com>
14558
14559 commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
14560 Author: Stefan Roese <sr@denx.de>
14561 Date:   Tue Jul 1 17:03:19 2008 +0200
14562
14563     ppc4xx: Fix 460EX/GT PCIe port initialization
14564
14565     This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
14566     configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
14567     this out.
14568
14569     Signed-off-by: Stefan Roese <sr@denx.de>
14570
14571 commit b571afde0295b007a45055ee49f8822c753a5651
14572 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14573 Date:   Sat Jun 7 12:29:52 2008 +0200
14574
14575     add SHA256 support
14576
14577     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14578     Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
14579
14580 commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
14581 Author: Marian Balakowicz <m8@semihalf.com>
14582 Date:   Fri Jun 6 23:07:40 2008 +0200
14583
14584     Delay FIT format check on sector based devices
14585
14586     Global FIT image operations like format check cannot be performed on
14587     a first sector data, defer them to the point when whole FIT image was
14588     uploaded to a system RAM.
14589
14590     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
14591     Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
14592     NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
14593
14594 commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
14595 Author: Dave Liu <r63238@freescale.com>
14596 Date:   Tue Jun 3 17:38:19 2008 +0800
14597
14598     sata: wait for device updating signature to host
14599
14600     The driver need wait for the device updating signature to host.
14601     If we don't wait for it, the driver can not detect the device(disk)
14602     when the system powers up.
14603
14604     Signed-off-by: Dave Liu <daveliu@freescale.com>
14605
14606 commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
14607 Author: Stefan Roese <sr@denx.de>
14608 Date:   Sat Jun 28 14:56:17 2008 +0200
14609
14610     ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
14611
14612     This patch implements a fix provided by AMCC so that the lockup upon
14613     simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
14614     anymore:
14615
14616     Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
14617     (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
14618     USB 2.0 host and SATA.
14619
14620     This errata is not officially available yet. I'll update the comment
14621     to add the errata number later.
14622
14623     Signed-off-by: Stefan Roese <sr@denx.de>
14624
14625 commit 8b616edb118e37d05f6401389eaee1c636b22828
14626 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
14627 Date:   Mon Jun 2 16:42:19 2008 -0400
14628
14629     serial_pl010.c: add watchdog support
14630
14631     Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
14632
14633 commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
14634 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
14635 Date:   Mon Jun 2 16:40:08 2008 -0400
14636
14637     jffs2_1pass.c: add watchdog support
14638
14639     Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
14640
14641 commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
14642 Author: Sascha Laue <sascha.laue@liebherr.com>
14643 Date:   Fri May 30 09:48:14 2008 +0200
14644
14645     Configure DSP POST; add watchdog reset to diag command
14646
14647     Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
14648
14649 commit f13526517859bf6b573e23ff47199e107d1009b5
14650 Author: Tor Krill <tor@excito.com>
14651 Date:   Thu May 29 10:40:17 2008 +0200
14652
14653     Add sata sil3114 support
14654
14655     Signed-off-by: Tor Krill <tor@excito.com>
14656
14657 commit e093a247628228100f405b6d7f6b1bfc16141938
14658 Author: Wolfgang Denk <wd@denx.de>
14659 Date:   Sat Jun 28 23:34:37 2008 +0200
14660
14661     Coding Style Cleanup
14662
14663     Signed-off-by: Wolfgang Denk <wd@denx.de>
14664
14665 commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
14666 Author: Wolfgang Denk <wd@denx.de>
14667 Date:   Sat Jun 28 23:16:01 2008 +0200
14668
14669     Update CHANGELOG
14670
14671     Signed-off-by: Wolfgang Denk <wd@denx.de>
14672
14673 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
14674 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
14675 Date:   Wed May 21 13:58:41 2008 -0400
14676
14677     ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
14678
14679     This patch adds support for the Lyrtech SFF-SDR board,
14680     based on the TI DaVinci architecture (ARM926EJS).
14681
14682     Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
14683     Signed-off-by: Philip Balister <philip@balister.org>
14684     Signed-off-by: Wolfgang Denk <wd@denx.de>
14685
14686 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
14687 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14688 Date:   Thu May 22 11:09:59 2008 +0200
14689
14690     MMC: Consolidate MMC/SD command definitions
14691
14692     This moves the MMC and SD Card command definitions from
14693     include/asm/arch/mmc.h into include/mmc.h. These definitions are
14694     given by the MMC and SD Card standards, not by any particular
14695     architecture.
14696
14697     There's a lot more room for consolidation in the MMC drivers which
14698     I'm hoping to get done eventually, but this patch is a start.
14699
14700     Compile-tested for all avr32 boards as well as lpc2292sodimm and
14701     lubbock. This should cover all three mmc drivers in the tree.
14702
14703     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14704
14705 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
14706 Author: Kyungmin Park <kmpark@infradead.org>
14707 Date:   Wed May 21 14:38:08 2008 +0900
14708
14709     Use better Ethernet timings for apollon board
14710
14711     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14712
14713 commit 41c5eaa7253ed82bbae1eda5667755872c615164
14714 Author: Andy Fleming <afleming@freescale.com>
14715 Date:   Mon Jun 16 13:58:56 2008 -0500
14716
14717     Resize device tree to allow space for board changes and the chosen node
14718
14719     Current code requires that a compiled device tree have space added to the end to
14720     leave room for extra nodes added by board code (and the chosen node).  This
14721     requires that device tree creators anticipate how much space U-Boot will add to
14722     the tree, which is absurd.  Ideally, the code would resize and/or relocate the
14723     tree when it needed more space, but this would require a systemic change to the
14724     fdt code, which is non-trivial.  Instead, we resize the tree inside
14725     boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
14726     where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
14727
14728     Signed-off-by: Andy Fleming <afleming@freescale.com>
14729
14730 commit 7570a9941fc565922078679a72d246fe208d696d
14731 Author: Andy Fleming <afleming@freescale.com>
14732 Date:   Mon Jun 16 13:58:55 2008 -0500
14733
14734     Fix an underflow bug in __lmb_alloc_base
14735
14736     __lmb_alloc_base can underflow if it fails to find free space.  This was fixed
14737     in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc.  This patch
14738     merely updates __lmb_alloc_base to resemble the current version in Linux.
14739
14740     Signed-off-by: Andy Fleming <afleming@freescale.com>
14741
14742 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
14743 Author: Andy Fleming <afleming@freescale.com>
14744 Date:   Mon Jun 16 13:58:54 2008 -0500
14745
14746     Add lmb_free
14747
14748     lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
14749     lmb_reserve to temporarily reserve some memory.
14750
14751     Signed-off-by: Andy Fleming <afleming@freescale.com>
14752
14753 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
14754 Author: Andy Fleming <afleming@freescale.com>
14755 Date:   Mon Jun 16 13:58:53 2008 -0500
14756
14757     Add ALIGN() macro
14758
14759     ALIGN() returns the smallest aligned value greater than the passed
14760     in address or size.  Taken from Linux.
14761
14762     Signed-off-by: Andy Fleming <afleming@freescale.com>
14763
14764 commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
14765 Author: Stefan Roese <sr@denx.de>
14766 Date:   Tue Jun 24 17:15:22 2008 +0200
14767
14768     ppc4xx: Fix compilation problems with phys_size_t
14769
14770     This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
14771     board specific files where it has been missing.
14772
14773     Signed-off-by: Stefan Roese <sr@denx.de>
14774
14775 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
14776 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
14777 Date:   Mon May 19 12:26:38 2008 +0200
14778
14779     Conditionally add -fno-stack-protector to CFLAGS
14780
14781     When compile-testing on powerpc, I get errors like this:
14782
14783     net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
14784
14785     This seems to be because -fstack-protector is on by default, so
14786     let's explicitly disable it on all architectures that support the
14787     option.
14788
14789     The Ubuntu toolchain is affected by this problem, and according to
14790     Mike Frysinger, Gentoo has been running with SSP enabled for years.
14791     More and more distros are turning SSP on by default, so this problem
14792     is likely to get worse in the future.
14793
14794     Also, powerpc just happens to be one of the arches I do
14795     compile-testing on. There may be other arches affected by this too.
14796
14797     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
14798
14799 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
14800 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14801 Date:   Sun May 18 19:09:52 2008 +0200
14802
14803     pcmcia/ti_pci1410a: Move compile condition to the Makefile
14804
14805     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14806
14807 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
14808 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14809 Date:   Sun May 18 19:09:51 2008 +0200
14810
14811     pxa_pcmcia: Move compile condition to the Makefile
14812
14813     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14814
14815 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
14816 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14817 Date:   Sun May 18 19:09:50 2008 +0200
14818
14819     marabun_pcmcia: Move compile condition to the Makefile
14820
14821     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14822
14823 commit 6a19c46cae43c16c528eddefae3db97134f1915d
14824 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
14825 Date:   Mon Jun 23 13:25:34 2008 +0200
14826
14827     fix non-working mvBL-M7
14828
14829     Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
14830
14831     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
14832     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14833
14834 commit 846f1574ddddeda2bc227655e687308695f41cdc
14835 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
14836 Date:   Mon Jun 23 11:40:56 2008 +0200
14837
14838     fix system config overwrite @ MPC834x and MPC8313
14839
14840     During 83xx setup the "System I/O configuration register high" gets
14841     overwritten with user defined value if CFG_SICRH is defined.
14842
14843     Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
14844     must keep their reset value regardless of configuration.
14845
14846     On my board (using RGMII) those bits are set after reset - yet it's
14847     unclear where they come from.
14848
14849     The patch keeps both bits on MPC834x and MPC8313.
14850
14851     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
14852     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14853
14854 commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
14855 Author: Kim Phillips <kim.phillips@freescale.com>
14856 Date:   Tue Jun 17 17:45:27 2008 -0500
14857
14858     mpc83xx: move CPU_TYPE_ENTRY over to processor.h
14859
14860     to avoid this:
14861
14862     cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
14863     In file included from cpu.c:33:
14864     /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
14865
14866     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14867
14868 commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
14869 Author: Stefan Roese <sr@denx.de>
14870 Date:   Mon Jun 23 11:15:09 2008 +0200
14871
14872     ppc4xx: Fix problem in gpio_config()
14873
14874     As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
14875     left by one. So the additional shift is bogus.
14876
14877     Signed-off-by: Stefan Roese <sr@denx.de>
14878
14879 commit 40777812316fc252c941665c0f60c148fd79d50f
14880 Author: Detlev Zundel <dzu@denx.de>
14881 Date:   Fri Jun 20 22:24:05 2008 +0200
14882
14883     fdt: Fix typo in variable name.
14884
14885     Signed-off-by: Detlev Zundel <dzu@denx.de>
14886
14887 commit 5f723a3b98c630bde33de74351f2121691fdef14
14888 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14889 Date:   Fri Jun 20 10:41:05 2008 +0200
14890
14891     avr32: Enable SPI flash support on ATNGW100
14892
14893     The ATNGW100 has 8MB DataFlash on board. Give users access to it through
14894     the new SPI flash framework.
14895
14896     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14897
14898 commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
14899 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14900 Date:   Fri Jun 20 12:44:28 2008 +0200
14901
14902     avr32: Fix SPI portmux initialization
14903
14904     Use the new GPIO manipulation functions to set up the chip select lines,
14905     and make sure both busses use GPIO for chip select control.
14906
14907     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14908
14909 commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
14910 Author: Peter Ma <pma@mediamatech.com>
14911 Date:   Sun Jun 1 22:59:24 2008 -0700
14912
14913     avr32: Add GPIO manipulation functions
14914
14915     Adds GPIO manipulation functions for AVR32 AP7 platform.
14916
14917     Signed-off-by: Peter Ma <pma@mediamatech.com>
14918     [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
14919     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14920
14921 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
14922 Author: Wolfgang Grandegger <wg@grandegger.com>
14923 Date:   Thu Jun 5 13:02:30 2008 +0200
14924
14925     MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
14926
14927     This patch is based on the following patch sent a few minutes ago:
14928     "NAND FSL UPM: driver re-write using the hwcontrol callback"
14929     It is untested, of course. Anton, could you please give it a try.
14930
14931     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
14932     Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14933
14934 commit 96026d42fa4e646d28318c0a1438aac4b2017909
14935 Author: Anatolij Gustschin <agust@denx.de>
14936 Date:   Thu Jun 12 12:40:11 2008 +0200
14937
14938     Fix 4xx build issue
14939
14940     Building for 4xx doesn't work since commit 4dbdb768:
14941
14942     In file included from 4xx_pcie.c:28:
14943     include/asm/processor.h:971: error: expected ')' before 'ver'
14944     make[1]: *** [4xx_pcie.o] Error 1
14945
14946     This patch fixes the problem.
14947
14948     Signed-off-by: Anatolij Gustschin <agust@denx.de>
14949     Acked-by: Stefan Roese <sr@denx.de>
14950     Acked-by: Kumar Gala <galak@kernel.crashing.org>
14951
14952 commit a036b0443657fe0f4773786de9092251869f08ac
14953 Author: Kumar Gala <galak@kernel.crashing.org>
14954 Date:   Thu Jun 19 01:45:50 2008 -0500
14955
14956     MPC8610HPCD: Report board id, board version and fpga version.
14957
14958     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14959
14960 commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
14961 Author: Kumar Gala <galak@kernel.crashing.org>
14962 Date:   Thu Jun 19 01:45:27 2008 -0500
14963
14964     MPC8641HPCN: Report board id, board version and fpga version.
14965
14966     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14967
14968 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
14969 Author: Stefan Roese <sr@denx.de>
14970 Date:   Mon Jun 16 10:40:02 2008 +0200
14971
14972     cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
14973
14974     This patch simplifies flash_toggle() (AMD commandset), which is used to
14975     detect if a FLASH device is still busy with erase/program operations. On
14976     800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
14977     did not detect the busy state reliably, resulting in non erased sectors
14978     etc. This patch now simplifies this function by "just" comparing the
14979     complete data-word instead of ANDing it with the command-word (0x40)
14980     before the compatison. It is done the same way in the Linux implementation
14981     chip_ready() in cfi_cmdset_0002.c.
14982
14983     Signed-off-by: Stefan Roese <sr@denx.de>
14984
14985 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
14986 Author: Philip Balister <philip@balister.org>
14987 Date:   Mon Jun 16 08:58:07 2008 -0400
14988
14989     NAND: Add missing declaration to non-redundant saveenv().
14990
14991     Signed-off-by: Scott Wood <scottwood@freescale.com>
14992
14993 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
14994 Author: Wolfgang Grandegger <wg@grandegger.com>
14995 Date:   Mon Jun 2 15:09:55 2008 +0200
14996
14997     MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
14998
14999     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15000     Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15001     Signed-off-by: Scott Wood <scottwood@freescale.com>
15002
15003 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
15004 Author: Stefan Roese <sr@denx.de>
15005 Date:   Tue Jun 10 15:34:11 2008 +0200
15006
15007     ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
15008
15009     This patch disables the square wave output of the M41T62 RTC used on
15010     Canyonlands & Glacier. Here the explanation:
15011
15012     The serial real-time clock part used in the design is an
15013     STMicro M41T62. This part has a full-time 32KHz square wave
15014     output that is connected to the TmrClk input to the
15015     processor. The default state for this square wave output is
15016     enabled so the output runs continuously when the board is
15017     powered normally and also from the battery. The TmrClk input
15018     to the processor goes to ground when the power is removed
15019     from the board/processor, and therefore the running square
15020     wave output is driving ground which drains the battery quickly.
15021
15022     Signed-off-by: Stefan Roese <sr@denx.de>
15023
15024 commit a94f22f08f280905926219e568568964cb9eeb9d
15025 Author: Andy Fleming <afleming@freescale.com>
15026 Date:   Wed Jun 11 18:10:20 2008 -0500
15027
15028     Fix build issue with string.h and linux/string.h
15029
15030     This commit:
15031     commit 338cc038461a6c7709c5b86fd9a240209338a1ae
15032     Author: Wolfgang Denk <wd@denx.de>
15033     Date:   Fri Jun 6 14:28:14 2008 +0200
15034
15035         tools/mkimage: fix compiler warnings on some systems.
15036
15037     Broke building on some systems, because the host's string.h was interfering
15038     with u-boot's linux/string.h.  It doesn't look like we need the u-boot one if
15039     we're building for the host, so now we only include when building inside
15040     u-boot.
15041
15042     Signed-off-by: Andy Fleming <afleming@freescale.com>
15043
15044 commit 9973e3c614721bbf169882ffc3be266a6611cd60
15045 Author: Becky Bruce <becky.bruce@freescale.com>
15046 Date:   Mon Jun 9 16:03:40 2008 -0500
15047
15048     Change initdram() return type to phys_size_t
15049
15050     This patch changes the return type of initdram() from long int to phys_size_t.
15051     This is required for a couple of reasons: long int limits the amount of dram
15052     to 2GB, and u-boot in general is moving over to phys_size_t to represent the
15053     size of physical memory.  phys_size_t is defined as an unsigned long on almost
15054     all current platforms.
15055
15056     This patch *only* changes the return type of the initdram function (in
15057     include/common.h, as well as in each board's implementation of initdram).  It
15058     does not actually modify the code inside the function on any of the platforms;
15059     platforms which wish to support more than 2GB of DRAM will need to modify
15060     their initdram() function code.
15061
15062     Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
15063     MPC8641HPCN.
15064
15065     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
15066
15067 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
15068 Author: Becky Bruce <becky.bruce@freescale.com>
15069 Date:   Mon Jun 9 20:37:18 2008 -0500
15070
15071     Change lmb to use phys_size_t/phys_addr_t
15072
15073     This updates the lmb code to use phys_size_t
15074     and phys_addr_t instead of unsigned long.  Other code
15075     which interacts with this code, like getenv_bootm_size()
15076     is also updated.
15077
15078     Booted on MPC8641HPCN, build-tested ppc, arm, mips.
15079
15080     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
15081
15082 commit 61b09fc2952dc636017df4e7970e3de132276ba1
15083 Author: Becky Bruce <becky.bruce@freescale.com>
15084 Date:   Mon Jun 9 20:37:17 2008 -0500
15085
15086     Change print_size to take phys_size_t
15087
15088     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
15089
15090 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
15091 Author: Becky Bruce <becky.bruce@freescale.com>
15092 Date:   Mon Jun 9 20:37:16 2008 -0500
15093
15094     Change bd/gd memsize/ram_size to be phys_size_t.
15095
15096     Currently, both are defined as an unsigned long, but
15097     should be phys_size_t. This should result in no real change,
15098     since phys_size_t is currently an unsigned long for all the
15099     default configs.  Also add print_lnum to cmd_bdinfo to deal
15100     with the potentially wider memsize.
15101
15102     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
15103
15104 commit ba04f7010958e88a8910f2a123fee53fdc72e013
15105 Author: Kumar Gala <galak@kernel.crashing.org>
15106 Date:   Tue Jun 10 16:16:02 2008 -0500
15107
15108     FSL LAW: Add new interface to use the last free LAW
15109
15110     LAWs have the concept of priority so its useful to be able to allocate
15111     the lowest (highest number) priority.  We will end up using this with the
15112     new DDR code.
15113
15114     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15115
15116 commit 859a86a25c569d3665ff413d1d923394b8a961f3
15117 Author: Kumar Gala <galak@kernel.crashing.org>
15118 Date:   Wed Jun 11 00:51:45 2008 -0500
15119
15120     85xx/86xx: Move to dynamic mgmt of LAWs
15121
15122     With the new LAW interface (set_next_law) we can move to letting the
15123     system allocate which LAWs are used for what purpose.  This makes life
15124     a bit easier going forward with the new DDR code.
15125
15126     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15127     Signed-off-by: Andy Fleming <afleming@freescale.com>
15128     Acked-by: Jon Loeliger <jdl@freescale.com>
15129     Acked-by: Becky Bruce <becky.bruce@freescale.com>
15130
15131 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
15132 Author: Kumar Gala <galak@kernel.crashing.org>
15133 Date:   Wed Jun 11 00:44:10 2008 -0500
15134
15135     FSL LAW: Keep track of LAW allocations
15136
15137     Make it so we keep track of which LAWs have allocated and provide
15138     a function (set_next_law) which can allocate a LAW for us if one is
15139     free.
15140
15141     In the future we will move to doing more "dynamic" LAW allocation
15142     since the majority of users dont really care about what LAW number
15143     they are at.
15144
15145     Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
15146
15147     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15148     Signed-off-by: Andy Fleming <afleming@freescale.com>
15149
15150 commit ddde74a159caa6e18b481fec01d40b885aebb566
15151 Author: Kumar Gala <galak@kernel.crashing.org>
15152 Date:   Mon Jun 9 22:31:57 2008 -0500
15153
15154     85xx: remove dummy board_early_init_f
15155
15156     A number of board ports have empty version of board_early_init_f
15157     for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
15158
15159     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15160
15161 commit 81e56e9af0d43712db8efb843606a8d62eab454f
15162 Author: Kumar Gala <galak@kernel.crashing.org>
15163 Date:   Mon Jun 9 18:55:38 2008 -0500
15164
15165     MPC8544DS: Update config.h
15166
15167     * Enable flash progress
15168     * remove CLEAR_LAW0 since we dont really use it
15169
15170     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15171
15172 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
15173 Author: Kumar Gala <galak@kernel.crashing.org>
15174 Date:   Mon Jun 9 13:37:24 2008 -0500
15175
15176     85xx: Remove unused and unconfigured memory test code.
15177
15178     Remove unused and unconfigured DDR test code from FSL 85xx boards.
15179     Besides, other common code exists.
15180
15181     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15182
15183 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
15184 Author: Sergei Poselenov <sposelenov@emcraft.com>
15185 Date:   Fri Jun 6 15:42:45 2008 +0200
15186
15187     Socrates: Added FPGA base address update in FDT.
15188
15189     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15190
15191 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
15192 Author: Sergei Poselenov <sposelenov@emcraft.com>
15193 Date:   Fri Jun 6 15:42:44 2008 +0200
15194
15195     Socrates: NAND support added. Changed the U-Boot base address and
15196
15197     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15198
15199 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
15200 Author: Sergei Poselenov <sposelenov@emcraft.com>
15201 Date:   Fri Jun 6 15:42:43 2008 +0200
15202
15203     NAND: Added support for 128-bit OOB, adapted
15204
15205     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15206
15207 commit 31ca0208612f2eb57690110d7c2815953650e47b
15208 Author: Sergei Poselenov <sposelenov@emcraft.com>
15209 Date:   Fri Jun 6 15:42:42 2008 +0200
15210
15211     Socrates: added missed file with UPMA configuration data.
15212
15213     Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
15214
15215 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
15216 Author: Sergei Poselenov <sposelenov@emcraft.com>
15217 Date:   Fri Jun 6 15:42:41 2008 +0200
15218
15219     Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
15220
15221     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15222
15223 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
15224 Author: Sergei Poselenov <sposelenov@emcraft.com>
15225 Date:   Fri Jun 6 15:42:40 2008 +0200
15226
15227     Added the upmconfig() function for 85xx.
15228
15229     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15230     Signed-off-by: Andy Fleming <afleming@freescale.com>
15231
15232 commit d39e68514ff943930ee692cff3fde03532eb7fec
15233 Author: Sergei Poselenov <sposelenov@emcraft.com>
15234 Date:   Fri Jun 6 15:42:39 2008 +0200
15235
15236     Socrates: config file cleanup.
15237
15238     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
15239
15240 commit e8cc3f04b124f757af4528206e60d8eb715ae083
15241 Author: Wolfgang Grandegger <wg@grandegger.com>
15242 Date:   Thu Jun 5 13:12:10 2008 +0200
15243
15244     TQM85xx: Change memory map to support Flash memory > 128 MiB
15245
15246     Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
15247     memory. The current memory map only supports up to 128 MiB Flash.
15248     This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
15249     set, up to 1 GiB flash is supported. To achieve this, the memory
15250     map has to be adjusted in great parts (for example the CCSRBAR is
15251     moved from 0xE0000000 to 0xA0000000).
15252
15253     If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
15254     memory map also has to be considered in the kernel (changed
15255     CCSRBAR address, changed PCI IO base address, ...). Please use
15256     an appropriate Flat Device Tree blob (tqm8548.dtb).
15257
15258     Signed-off-by: Martin Krause <martin.krause@tqs.de>
15259     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15260
15261 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
15262 Author: Wolfgang Grandegger <wg@grandegger.com>
15263 Date:   Thu Jun 5 13:12:09 2008 +0200
15264
15265     TQM85xx: NAND support via local bus UPMB
15266
15267     This patch adds support for NAND FLASH on the TQM8548. It is disabled by
15268     default and can be enabled for the TQM8548 modules. It is now based on
15269     the re-written FSL NAND UPM driver. A patch has been posted earlier today
15270     with the subject:
15271
15272     "NAND FSL UPM: driver re-write using the hwcontrol callback"
15273
15274     Note that the R/B pin is not supported by that module requiring to use
15275     the specified maximum delay time.
15276
15277     Note: With NAND support enabled the size of the U-Boot image exceeds
15278     256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
15279     doubling the image size :-(.
15280
15281     Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
15282     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15283
15284 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
15285 Author: Wolfgang Grandegger <wg@grandegger.com>
15286 Date:   Thu Jun 5 13:12:08 2008 +0200
15287
15288     TQM8548: PCI express support
15289
15290     This patch adds support for PCI express cards. The board support
15291     now uses common FSL PCI init code, for both, PCI and PCIe on all
15292     TQM85xx modules.
15293
15294     Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
15295     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15296
15297 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
15298 Author: Wolfgang Grandegger <wg@grandegger.com>
15299 Date:   Thu Jun 5 13:12:07 2008 +0200
15300
15301     TQM8548: Basic support for the TQM8548 modules
15302
15303     This patch adds basic support for the TQM8548 module from TQ-Components
15304     (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
15305     eTSEC 3 and 4
15306
15307     Furthermore Flash buffer write has been enabled to speed up output to
15308     the Flash by approx. a factor of 10.
15309
15310     Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
15311     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15312
15313 commit 25991353204c78b094c3c1fec90182dcd607ab8f
15314 Author: Wolfgang Grandegger <wg@grandegger.com>
15315 Date:   Thu Jun 5 13:12:06 2008 +0200
15316
15317     TQM85xx: Support for Flat Device Tree
15318
15319     This patch adds support for Linux kernels using the Flat Device Tree.
15320     It also re-defines the default environment settings for booting Linux
15321     with the FDT blob.
15322
15323     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15324
15325 commit d9ee843d54c54776e1fdb86336ce554906a87331
15326 Author: Wolfgang Grandegger <wg@grandegger.com>
15327 Date:   Thu Jun 5 13:12:05 2008 +0200
15328
15329     TQM85xx: Support for Intel 82527 compatible CAN controller
15330
15331     This patch adds initialization of the UPMC RAM to support up to two
15332     Intel 82527 compatible CAN controller on the TQM85xx modules.
15333
15334     Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
15335     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15336
15337 commit 518d5cfe72916323c746af1647764459914f555f
15338 Author: Wolfgang Grandegger <wg@grandegger.com>
15339 Date:   Thu Jun 5 13:12:04 2008 +0200
15340
15341     TQM85xx: Bugfix in the SDRAM initialisation
15342
15343     The CS0_BNDS register is now set according to the detected
15344     memory size.
15345
15346     Signed-off-by Martin Krause <martin.krause@tqs.de>
15347
15348 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
15349 Author: Wolfgang Grandegger <wg@grandegger.com>
15350 Date:   Thu Jun 5 13:12:03 2008 +0200
15351
15352     TQM85xx: Fix chip select configuration for second FLASH bank
15353
15354     This patch fixes the re-calculation of the automatic chip select
15355     configuration for boards with two populated FLASH banks.
15356
15357     Signed-off-by: Martin Krause <martin.krause@tqs.de>
15358
15359 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
15360 Author: Wolfgang Grandegger <wg@grandegger.com>
15361 Date:   Thu Jun 5 13:12:02 2008 +0200
15362
15363     TQM85xx: Support for Spansion 'N' type flashes added
15364
15365     The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
15366     than the formerly used 'M' types (S29GLxxxM series), so the flash layout
15367     needs to be changed -> new start address of the environment. The macro
15368     definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
15369     defined for boards with 'N' type flashes.
15370
15371     Signed-off-by: Martin Krause <martin.krause@tqs.de>
15372     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15373
15374 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
15375 Author: Wolfgang Grandegger <wg@grandegger.com>
15376 Date:   Thu Jun 5 13:12:01 2008 +0200
15377
15378     TQM85xx: Fix CPM port pin configuration
15379
15380     Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
15381     board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
15382     as serial interface anyway. Worse, on some board variants configuring the
15383     pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
15384
15385     Signed-off-by: Martin Krause <martin.krause@tqs.de>
15386
15387 commit b99ba1679e8cd51b023e67098c89e606e47137d2
15388 Author: Wolfgang Grandegger <wg@grandegger.com>
15389 Date:   Thu Jun 5 13:12:00 2008 +0200
15390
15391     TQM85xx: Various coding style fixes
15392
15393     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15394
15395 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
15396 Author: Gerald Van Baren <vanbaren@cideas.com>
15397 Date:   Tue Jun 10 22:15:58 2008 -0400
15398
15399     libfdt: Move the working_fdt pointer to cmd_fdt.c
15400
15401     The working_fdt pointer was declared in common/fdt_support.c but was
15402     not used there.  Move it to common/cmd_fdt.c where it is used (it is
15403     also used in lib_ppc/bootm.c).
15404
15405     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15406
15407 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
15408 Author: Kim Phillips <kim.phillips@freescale.com>
15409 Date:   Tue Jun 10 11:06:17 2008 -0500
15410
15411     fdt: unshadow global working fdt variable
15412
15413     differentiate with local variables of the same name by renaming the
15414     global 'fdt' variable 'working_fdt'.
15415
15416     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15417
15418 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
15419 Author: Andy Fleming <afleming@freescale.com>
15420 Date:   Tue Jun 10 18:49:34 2008 -0500
15421
15422     socrates: Fix PCI clk fix patch
15423
15424     The submitted patch seems to have been more up-to-date, but an older patch was
15425     already in the repository.  This patch encompasses the differences
15426
15427     Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
15428
15429     Signed-off-by: Andy Fleming <afleming@freescale.com>
15430
15431 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
15432 Author: Wolfgang Grandegger <wg@grandegger.com>
15433 Date:   Thu Jun 5 13:02:29 2008 +0200
15434
15435     NAND FSL UPM: driver re-write using the hwcontrol callback
15436
15437     This is a re-write of the NAND FSL UPM driver using the more universal
15438     hwcontrol callback (instead of the cmdfunc callback). Here is a brief
15439     list of furher modifications:
15440
15441     - For the time being, the UPM setup writing the UPM array has been
15442       removed from the driver and must now be done by the board specific
15443       code.
15444
15445     - The bus width definition in "struct fsl_upm_nand" is now in bits to
15446       comply with the corresponding Linux driver and 8, 16 and 32 bit
15447       accesses are supported.
15448
15449     - chip->dev_read is only set if fun->dev_ready != NULL, which is
15450       required for boards not connecting the R/B pin.
15451
15452     - A few issue have been fixed with MxMR bit manipulation like in the
15453       corresponding Linux driver.
15454
15455     Note: I think the "io_addr" field of "struct fsl_upm" could be removed
15456           as well, because the address is already determined by
15457           "nand->IO_ADDR_[RW]", but I'm not 100% sure.
15458
15459     This patch has been tested on a TQM8548 modules with the NAND chip
15460     Micron MT29F8G08FABWP.
15461
15462     This patch is based on the following patches posted to this list a few
15463     minutes ago:
15464
15465       PPC: add accessor macros to clear and set bits in one shot
15466       83xx/85xx/86xx: add more MxMR local bus definitions
15467
15468     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15469     Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15470
15471 commit 6beecfbb542992eede5831240cd58678274683a9
15472 Author: Wolfgang Grandegger <wg@grandegger.com>
15473 Date:   Thu Jun 5 13:11:59 2008 +0200
15474
15475     MPC85xx: Beautify boot output of L2 cache configuration
15476
15477     The boot output is now aligned poperly with other boot output
15478     lines, e.g.:
15479
15480       FLASH: 128 MB
15481       L2:    512 KB enabled
15482
15483     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15484
15485 commit 398415114f0a705163a14543e9fef03f734b1ffa
15486 Author: Wolfgang Grandegger <wg@grandegger.com>
15487 Date:   Wed Jun 4 12:45:22 2008 +0200
15488
15489     PPC: add accessor macros to clear and set bits in one shot
15490
15491     PPC: add accessor macros to clear and set bits in one shot
15492
15493     This patch adds macros from linux/include/asm-powerpc/io.h to clear and
15494     set bits in one shot using the in_be32, out_be32, etc. accessor functions.
15495     They are very handy to manipulate bits it I/O registers.
15496
15497     This patch is required for my forthcoming FSL NAND UPM driver re-write and
15498     the support for the TQM8548 module.
15499
15500     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15501
15502 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
15503 Author: Wolfgang Grandegger <wg@grandegger.com>
15504 Date:   Wed Jun 4 13:52:17 2008 +0200
15505
15506     TQM: move TQM boards to board/tqc
15507
15508     Move all TQM board directories to the vendor specific directory "tqc"
15509     for modules from TQ-Components GmbH (http://www.tqc.de).
15510
15511     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15512
15513 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
15514 Author: Wolfgang Grandegger <wg@grandegger.com>
15515 Date:   Mon Jun 2 12:09:30 2008 +0200
15516
15517     83xx/85xx/86xx: add more MxMR local bus definitions
15518
15519     83xx/85xx/86xx: add more MxMR local bus definitions
15520
15521     This patch adds more macro definitions for the UPM Machine Mode Registers
15522     They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
15523     common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
15524     required for my forthcoming FSL NAND UPM driver re-write and the support
15525     for the TQM8548 module.
15526
15527     This patch is based on the following two patches from Anton Vorontsov:
15528
15529     http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
15530     http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
15531
15532     I leave coding style violation fixes, code beautification and name
15533     corrections to somebody else ;-(.
15534
15535     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
15536
15537 commit c8c5fc266e4499e283c293ccb972863156aa4134
15538 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15539 Date:   Thu May 29 18:14:56 2008 +0400
15540
15541     83xx/85xx: further localbus cleanups
15542
15543     Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
15544     from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
15545
15546     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15547
15548 commit 42dbd667c88d496882d53e22656e89b654205492
15549 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15550 Date:   Wed May 28 18:20:15 2008 +0400
15551
15552     83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
15553
15554     This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
15555     use it on MPC85xx and MPC86xx processors.
15556
15557     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15558
15559 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
15560 Author: Kumar Gala <galak@kernel.crashing.org>
15561 Date:   Thu May 29 11:22:06 2008 -0500
15562
15563     85xx: Add setting of cache props in the device tree.
15564
15565     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15566
15567 commit 4dbdb7681e243431530df0725627192a0c4aefda
15568 Author: Kumar Gala <galak@kernel.crashing.org>
15569 Date:   Tue Jun 10 16:53:46 2008 -0500
15570
15571     85xx: expose cpu identification
15572
15573     The current cpu identification code is used just to return the name
15574     of the processor at boot.  There are some other locations that the name
15575     is useful (device tree setup).  Expose the functionality to other bits
15576     of code.
15577
15578     Also, drop the 'E' suffix and add it on by looking at the SVR version
15579     when we print this out.  This is mainly to allow the most flexible use
15580     of the name.  The device tree code tends to not care about the 'E' suffix.
15581
15582     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15583
15584 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
15585 Author: Kim Phillips <kim.phillips@freescale.com>
15586 Date:   Tue Jun 10 13:25:24 2008 -0500
15587
15588     mpc83xx: MVBLM7: minor build fixups
15589
15590     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15591
15592 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
15593 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
15594 Date:   Tue Jun 10 09:14:05 2008 +0200
15595
15596     add MPC8343 based board mvBlueLYNX-M7 (board+make files)
15597
15598     Add MPC8343 based board mvBlueLYNX-M7.
15599     It's a single board stereo camera system.
15600     Please read doc/README.mvblm7 for details.
15601
15602     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
15603     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15604
15605 commit c005b93925ba49f07da2aa748527996d927e172f
15606 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
15607 Date:   Tue Jun 10 09:13:16 2008 +0200
15608
15609     add MPC8343 based board mvBlueLYNX-M7 (doc+config)
15610
15611     Add MPC8343 based board mvBlueLYNX-M7.
15612     It's a single board stereo camera system.
15613     Please read doc/README.mvblm7 for details.
15614
15615     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
15616     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15617
15618 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
15619 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15620 Date:   Thu May 29 18:14:56 2008 +0400
15621
15622     83xx/85xx: further localbus cleanups
15623
15624     move the BRx_* and ORx_* left behind in mpc85xx.h
15625
15626     The same is needed for mpc8xx.h and mpc8260.h (defines are almost
15627     the same, just few differences which needs some attention though).
15628
15629     But the bad news for mpc8xx and mpc8260 is that there are a lot of users
15630     of these defines. So this cleanup I'll leave for the "better times".
15631
15632     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15633     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15634
15635 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
15636 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15637 Date:   Wed May 28 18:20:15 2008 +0400
15638
15639     83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
15640
15641     This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
15642     use it on MPC85xx and MPC86xx processors.
15643
15644     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15645     Acked-by: Andy Fleming <afleming@freescale.com>
15646     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15647
15648 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
15649 Author: Tor Krill <tor@excito.com>
15650 Date:   Mon Jun 2 15:09:30 2008 +0200
15651
15652     Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
15653
15654     Signed-off-by: Tor Krill <tor@excito.com>
15655     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15656
15657 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
15658 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15659 Date:   Mon Jun 9 23:37:44 2008 +0900
15660
15661     net: Conditional COBJS inclusion of network drivers
15662
15663     Replace COBJS-y with appropriate driver config names.
15664
15665     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15666     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15667
15668 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
15669 Author: Gerald Van Baren <vanbaren@cideas.com>
15670 Date:   Mon Jun 9 21:02:17 2008 -0400
15671
15672     Use strncmp() for the fdt command
15673
15674     Cleaner than doing multiple conditionals on characters.
15675
15676     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15677
15678 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
15679 Author: Gerald Van Baren <vanbaren@cideas.com>
15680 Date:   Sat Jun 7 12:25:05 2008 -0400
15681
15682     The fdt boardsetup command criteria was not unique
15683
15684     It was checking just for "b", which is not unique with respect to the
15685     "boot" command.  Change to check for "boa"[rdsetup].
15686
15687     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15688
15689 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
15690 Author: David Gibson <david@gibson.dropbear.id.au>
15691 Date:   Tue May 20 17:19:11 2008 +1000
15692
15693     libfdt: Several cleanups to parameter checking
15694
15695     This patch makes a couple of small cleanups to parameter checking of
15696     libfdt functions.
15697
15698         - In several functions which take a node offset, we use an
15699     idiom involving fdt_next_tag() first to check that we have indeed been
15700     given a node offset.  This patch adds a helper function
15701     _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
15702
15703         - In fdt_rw.c in several places we have the expanded version
15704     of the RW_CHECK_HEADER() macro for no particular reason.  This patch
15705     replaces those instances with an invocation of the macro; that's what
15706     it's for.
15707
15708         - In fdt_sw.c we rename the check_header_sw() function to
15709     sw_check_header() to match the analgous function in fdt_rw.c, and we
15710     provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
15711     functions in fdt_rw.c
15712
15713     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
15714
15715 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
15716 Author: Gerald Van Baren <vanbaren@cideas.com>
15717 Date:   Tue Jun 3 20:34:45 2008 -0400
15718
15719     Remove the deprecated CONFIG_OF_FLAT_TREE
15720
15721     Use CONFIG_OF_LIBFDT instead to support flattened device trees.  It is
15722     cleaner, has better functionality, and is better supported.
15723
15724     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15725
15726 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
15727 Author: Gerald Van Baren <vanbaren@cideas.com>
15728 Date:   Tue Jun 3 20:26:29 2008 -0400
15729
15730     Change the stxxst to CONFIG_OF_LIBFDT
15731
15732     This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
15733     to CONFIG_OF_LIBFDT.
15734
15735     WARNING: It appears that this board lost its ability to boot via a
15736     flattened device tree prior to this changeset.
15737
15738     WARNING: This conversion was untested because I do not have a board to
15739     test it on.
15740
15741     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15742
15743 commit 589c04271d129729a8b01391453851ab9cc4069c
15744 Author: Gerald Van Baren <vanbaren@cideas.com>
15745 Date:   Tue Jun 3 20:24:58 2008 -0400
15746
15747     Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
15748
15749     This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
15750     to CONFIG_OF_LIBFDT.
15751
15752     WARNING: This conversion is untested because I do not have a board to
15753     test it on.
15754
15755     NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
15756     /aliases/ethernet1 property for the ethernet to work.
15757
15758     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15759
15760 commit ee1e35bede91debc8bff9b02f75574486033b652
15761 Author: Kumar Gala <galak@kernel.crashing.org>
15762 Date:   Thu May 29 01:21:24 2008 -0500
15763
15764     85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
15765
15766     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15767
15768 commit 3b9519fc50802436e417c839e69df7b2016cade5
15769 Author: Becky Bruce <becky.bruce@freescale.com>
15770 Date:   Wed May 14 13:10:04 2008 -0500
15771
15772     MPC85xx: Change traps.c to not reference non-addressable memory
15773
15774     Currently, END_OF_RAM is used by the trap code to determine if
15775     we should attempt to access the stack pointer or not. However,
15776     on systems with a lot of RAM, only a subset of the RAM is
15777     guaranteed to be mapped in and accessible.  Change END_OF_RAM
15778     to use get_effective_memsize() instead of using the raw ram
15779     size out of the bd.
15780
15781     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
15782
15783 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
15784 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15785 Date:   Mon Jun 9 13:39:57 2008 +0900
15786
15787     sh: Renesas Solutions SH7763RDP board support
15788
15789     SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
15790     In this patch, support SCIF, NOR Flash, and Ethernet.
15791
15792     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15793     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15794
15795 commit 60179098a95eaa972007d7ec58e4c1588029720f
15796 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15797 Date:   Fri Jun 6 16:24:13 2008 +0900
15798
15799     sh: Add support Renesas SH7763
15800
15801     Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
15802     This patch supprts CPU register's header file.
15803
15804     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15805     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15806
15807 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
15808 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15809 Date:   Fri Jun 6 16:16:08 2008 +0900
15810
15811     sh: SH7763 SCIF support
15812
15813     SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
15814     but only SCIF2 is different. This patch work all SCIF channel.
15815
15816     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
15817     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15818
15819 commit 79b51ff8205f0354d5300570614c1d2db499679c
15820 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15821 Date:   Sat Jun 7 20:51:59 2008 +0900
15822
15823     [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
15824
15825     Also get rid of some #ifdefs in *.c files.
15826
15827     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15828
15829 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
15830 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15831 Date:   Sat Jun 7 20:51:56 2008 +0900
15832
15833     [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
15834
15835     CONFIG_SOC_AU1X00
15836
15837       Common Alchemy Au1x00 stuff. All Alchemy processor based machines
15838       need to have this config as a system type specifier.
15839
15840     CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
15841     CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
15842
15843       Machine type specifiers. Each port should have one of aboves.
15844
15845     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15846
15847 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
15848 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
15849 Date:   Fri May 30 16:05:28 2008 -0400
15850
15851     env_nand.c: Added bad block management for environment variables
15852
15853     Modified to check for bad blocks and to skipping over them when
15854     CFG_ENV_RANGE has been defined.
15855     CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
15856     flash block size.
15857
15858     Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
15859     Signed-off-by: Scott Wood <scottwood@freescale.com>
15860
15861 commit 279726bd00558e80263d44581c44167625b7fb9a
15862 Author: Becky Bruce <becky.bruce@freescale.com>
15863 Date:   Wed May 14 13:09:58 2008 -0500
15864
15865     MPC86xx: Change traps.c to not reference non-addressable memory
15866
15867     Currently, END_OF_RAM is used by the trap code to determine if
15868     we should attempt to access the stack pointer or not. However,
15869     on systems with a lot of RAM, only a subset of the RAM is
15870     guaranteed to be mapped in and accessible.  Change END_OF_RAM
15871     to use get_effective_memsize() instead of using the raw ram
15872     size out of the bd to prevent us from trying to access
15873     non-mapped memory.
15874
15875     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
15876
15877 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
15878 Author: Wolfgang Denk <wd@denx.de>
15879 Date:   Fri Jun 6 14:28:14 2008 +0200
15880
15881     tools/mkimage: fix compiler warnings on some systems.
15882
15883     Signed-off-by: Wolfgang Denk <wd@denx.de>
15884
15885 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
15886 Author: Stefan Roese <sr@denx.de>
15887 Date:   Fri Jun 6 16:10:41 2008 +0200
15888
15889     ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
15890
15891     We use upper case letters for the AMCC processor defines (like
15892     CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
15893     not CONFIG_440SPe. This patch fixes the last misspelled config options.
15894
15895     Signed-off-by: Stefan Roese <sr@denx.de>
15896
15897 commit 72675dc6c06a48846d180106161d49dd714383cc
15898 Author: Stefan Roese <sr@denx.de>
15899 Date:   Fri Jun 6 15:55:21 2008 +0200
15900
15901     ppc4xx: Unify AMCC's board config files (part 3/3)
15902
15903     This patch series unifies the AMCC eval board ports by introducing
15904     a common include header for all AMCC eval boards:
15905
15906     include/configs/amcc-common.h
15907
15908     This header now includes all common configuration options/defines which
15909     are removed from the board specific headers.
15910
15911     The reason for this is ease of maintenance and unified look and feel
15912     of all AMCC boards.
15913
15914     Signed-off-by: Stefan Roese <sr@denx.de>
15915
15916 commit 490f204096d6e2c9940f67816f154a8125bab116
15917 Author: Stefan Roese <sr@denx.de>
15918 Date:   Fri Jun 6 15:55:03 2008 +0200
15919
15920     ppc4xx: Unify AMCC's board config files (part 2/3)
15921
15922     This patch series unifies the AMCC eval board ports by introducing
15923     a common include header for all AMCC eval boards:
15924
15925     include/configs/amcc-common.h
15926
15927     This header now includes all common configuration options/defines which
15928     are removed from the board specific headers.
15929
15930     The reason for this is ease of maintenance and unified look and feel
15931     of all AMCC boards.
15932
15933     Signed-off-by: Stefan Roese <sr@denx.de>
15934
15935 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
15936 Author: Stefan Roese <sr@denx.de>
15937 Date:   Fri Jun 6 15:54:31 2008 +0200
15938
15939     ppc4xx: Unify AMCC's board config files (part 1/3)
15940
15941     This patch series unifies the AMCC eval board ports by introducing
15942     a common include header for all AMCC eval boards:
15943
15944     include/configs/amcc-common.h
15945
15946     This header now includes all common configuration options/defines which
15947     are removed from the board specific headers.
15948
15949     The reason for this is ease of maintenance and unified look and feel
15950     of all AMCC boards.
15951
15952     Signed-off-by: Stefan Roese <sr@denx.de>
15953
15954 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
15955 Author: Remy Bohmer <linux@bohmer.net>
15956 Date:   Thu Jun 5 13:03:36 2008 +0200
15957
15958     DM9000 fix status check fail 0x6d error for trizeps board
15959
15960     According to the Application Notes of the DM9000, only the 2 bits 0:1 of
15961     the status byte need to be checked to identify a valid packet in the fifo
15962
15963     But, The several different Application Notes do not all speak the same
15964     language on these bits. They do not disagree, but only 1 Application Note
15965     noted explicitly that only these 2 bits need to be checked.
15966     Even the datasheets do not mention anything about these 2 bits.
15967
15968     Because the old code, and the kernel check the whole byte, I left this piece
15969     untouched.
15970
15971     However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
15972     it should work.
15973
15974     Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
15975     in the fifo) is much shorter now, compared to the older U-boot driver code,
15976     so that we can maybe run into a hardware condition now that was never seen
15977     before, or maybe was seen very unfrequently.
15978
15979     Additionaly added a cleanup of a stack variable.
15980
15981     Signed-off-by: Remy Bohmer <linux@bohmer.net>
15982     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15983
15984 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
15985 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15986 Date:   Thu Jun 5 22:29:00 2008 +0900
15987
15988     [MIPS] Update <asm/addrspace.h> header
15989
15990     - Fix traditional KSEG names
15991     - Replace PHYSADDR with CPHYSADDR
15992
15993     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15994
15995 commit f0d5a6f060d00358b85c62a921a423ea8df71184
15996 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15997 Date:   Thu Jun 5 22:29:00 2008 +0900
15998
15999     [MIPS] mips_config.mk: Misc fixes
16000
16001     - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
16002     - Modify comments
16003
16004     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16005
16006 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
16007 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16008 Date:   Thu Jun 5 22:29:00 2008 +0900
16009
16010     [MIPS] Kill unused <version.h> inclusions
16011
16012     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16013
16014 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
16015 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16016 Date:   Thu Jun 5 22:29:00 2008 +0900
16017
16018     [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
16019
16020     MIPS port has two problems in timer routines. One is now we assume CFG_HZ
16021     equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
16022     in the U-Boot system.
16023
16024     The other is we don't have a proper time management counter like timestamp
16025     other ARCHs have. We need the 32-bit millisecond clock counter.
16026
16027     This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
16028     32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
16029     of calculated CP0 counter cycles in a CFG_HZ.
16030
16031     STRATEGY:
16032
16033     * Fix improper CFG_HZ value to have 1000
16034
16035     * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
16036
16037     * timer_init: initialize timestamp and set up the first timer expiration.
16038       Note that we don't need to initialize CP0 count/compare registers here
16039       as they have been already zeroed out on the system reset. Leave them as
16040       they are.
16041
16042     * get_timer: calculate how many timestamps have been passed, then return
16043       base-relative timestamp. Make sure we can easily count missed timestamps
16044       regardless of CP0 count/compare value.
16045
16046     * get_ticks: return the current timestamp, that is get_timer(0).
16047
16048     Most parts are from good old Linux v2.6.16 kernel.
16049
16050     v2:
16051     - Remove FIXME comments as they turned out to be trivial.
16052     - Use CP0 compare register as a global variable for expirelo.
16053     - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
16054       instead.
16055
16056     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16057
16058 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
16059 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16060 Date:   Thu Jun 5 22:29:00 2008 +0900
16061
16062     [MIPS] lib_mips/time.c: Fix udelay
16063
16064     What we have to do is just to wait for given micro-seconds. No need to
16065     take into account current time, get_timer and CFG_HZ.
16066
16067     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16068
16069 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
16070 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16071 Date:   Thu Jun 5 22:28:59 2008 +0900
16072
16073     [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
16074
16075     We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
16076     This patch replaces mips_{compare,count}_set and mips_count_get with
16077     existing macros.
16078
16079     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16080
16081 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
16082 Author: Remy Bohmer <linux@bohmer.net>
16083 Date:   Tue Jun 3 15:48:17 2008 +0200
16084
16085     Get rid of annoying/superfluous bad-checksum warning message
16086
16087     U-boot can complain a lot about 'checksum bad' when it is attached to the network.
16088     It is annoying for ordinary users who start to doubt the network connection
16089     in general when they see messages like this.
16090
16091     This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
16092     than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
16093     now before checking the checksum.
16094
16095     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16096     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16097
16098 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
16099 Author: Remy Bohmer <linux@bohmer.net>
16100 Date:   Wed Jun 4 10:47:25 2008 +0200
16101
16102     Fix order for reading rx-status registers in 32bit mode of DM9000
16103
16104     A last minute cleanup before submitting the DM9000A patch series yesterday introduced
16105     a bug in reading the rx-status registers in 32bit mode only.
16106     This patch repairs this.
16107
16108     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16109     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16110
16111 commit 98291e2e689096420465074cce926b226d2e71b4
16112 Author: Remy Bohmer <linux@bohmer.net>
16113 Date:   Tue Jun 3 15:26:26 2008 +0200
16114
16115     DM9000: Some minor code cleanups
16116
16117     Some lines of the U-boot DM9000x driver are longer than 80 characters, or
16118     need some other minor cleanup.
16119
16120     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16121     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16122
16123 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
16124 Author: Remy Bohmer <linux@bohmer.net>
16125 Date:   Tue Jun 3 15:26:25 2008 +0200
16126
16127     DM9000: Make driver work properly for DM9000A
16128
16129     The DM9000A network controller does not work with the U-boot DM9000x driver.
16130     Analysis showed that many incoming packets are lost.
16131
16132     The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
16133     check for a valid rx packet be done on the interrupt status register, not
16134     directly by performing the dummy read and the rx status check as is currently
16135     the case in the u-boot driver.
16136
16137     When the recommended poll is done as suggested the driver starts working
16138     correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
16139     can be more than 1 package in the fifo at the same time.
16140
16141     The driver must perform the rx-status check in a loop and read and handle all
16142     packages until there is no more left _after_ the interrupt RX flag is set.
16143
16144     This change has been tested with DM9000A, DM9000E, DM9000EP.
16145
16146     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16147     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16148
16149 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
16150 Author: Remy Bohmer <linux@bohmer.net>
16151 Date:   Tue Jun 3 15:26:24 2008 +0200
16152
16153     DM9000: Improve eth_reset() routine
16154
16155     According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
16156     reset procedure must be done twice to properly reset the DM9000 by means of software.
16157     This errata is not needed anymore for the DM9000A, but it does not bother it.
16158
16159     This change has been tested with DM9000A, DM9000E, DM9000EP.
16160
16161     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16162     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16163
16164 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
16165 Author: Remy Bohmer <linux@bohmer.net>
16166 Date:   Tue Jun 3 15:26:23 2008 +0200
16167
16168     DM9000: improve eth_send() routine
16169
16170     The eth_send routine of the U-boot DM9000x driver does not match the
16171     DM9000 or DM9000A application notes/programming guides.
16172
16173     This change improves the stability of the DM9000A network controller.
16174
16175     This change has been tested with DM9000A, DM9000E, DM9000EP.
16176
16177     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16178     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16179
16180 commit 134e266253c02a7832560da59d394989c4f64453
16181 Author: Remy Bohmer <linux@bohmer.net>
16182 Date:   Tue Jun 3 15:26:22 2008 +0200
16183
16184     DM9000: repair debug logging
16185
16186     It seems that the debugging code of the DM9000x driver in U-boot has not been
16187     compiled for a long time, because it cannot compile...
16188
16189     Also rearranged some loglines to get more useful info while debugging.
16190
16191     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16192     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16193
16194 commit a101361bfe23c120321e45d114c0603b8e0763e9
16195 Author: Remy Bohmer <linux@bohmer.net>
16196 Date:   Tue Jun 3 15:26:21 2008 +0200
16197
16198     DM9000: Add data bus-width auto detection.
16199
16200     The U-boot DM9000x driver contains a compile time bus-width definition for
16201     the databus connected to the network controller.
16202
16203     This compile check makes the code unclear, inflexible and is unneccessary.
16204     It can be asked to the network controller what its bus-width is by reading bits
16205     6 and 7 of the interrupt status register.
16206
16207     The linux kernel already uses a runtime mechanism to determine this bus-width,
16208     so the implementation below looks somewhat like that implementation.
16209
16210     This change has been tested with DM9000A, DM9000E, DM9000EP.
16211
16212     Signed-off-by: Remy Bohmer <linux@bohmer.net>
16213     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16214
16215 commit 63a0afa0c32e5f4ea98a9439542870072437404d
16216 Author: Stefan Roese <sr@denx.de>
16217 Date:   Wed Jun 4 19:19:20 2008 +0200
16218
16219     ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
16220
16221     This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
16222     introduced by the commit:
16223
16224     ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
16225
16226     With this patch SDRAM will get initialized again and booting from NAND
16227     is working again.
16228
16229     Signed-off-by: Stefan Roese <sr@denx.de>
16230     Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
16231
16232 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
16233 Author: Wolfgang Denk <wd@denx.de>
16234 Date:   Tue May 27 14:19:30 2008 +0200
16235
16236     Socrates: Fix PCI bus frequency report
16237
16238     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
16239
16240 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
16241 Author: Tor Krill <tor@excito.com>
16242 Date:   Thu May 29 11:10:30 2008 +0200
16243
16244     Fix incorrect switch for IF_TYPE in part.c
16245
16246     Use correct field in block_dev_desc_t when writing interface type in
16247     dev_print. Error introduced in 574b3195.
16248
16249     Also added fix from Martin Krause
16250
16251     Signed-off-by: Tor Krill <tor@excito.com>
16252
16253 commit b64b8a0bd310935b70af69ac970952f2b364ae56
16254 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16255 Date:   Tue May 27 10:25:39 2008 +0200
16256
16257     Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
16258
16259     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16260
16261 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
16262 Author: Peter Tyser <ptyser@xes-inc.com>
16263 Date:   Thu May 22 18:56:52 2008 -0500
16264
16265     Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
16266
16267     Removed unneeded command line history initialization.  Also, the original
16268     code would access the 'initted' variable before relocation to SDRAM
16269     which resulted in erratic behavior since the bss is not initialized when
16270     executing from flash.
16271
16272     Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16273
16274 commit 22f371b63038a4ecab04068877c1089e51a01ba1
16275 Author: Grant Erickson <gerickson@nuovations.com>
16276 Date:   Wed May 21 13:28:30 2008 -0700
16277
16278     PPC4xx: Simplified post_word_{load, store}
16279
16280     This patch simplifies post_word_{load,store} by using the preprocessor
16281     to eliminate redundant, copy-and-pasted code.
16282
16283     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
16284
16285 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
16286 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
16287 Date:   Wed May 7 21:25:33 2008 +0400
16288
16289     cfi_flash: enable M18 flash chips family support.
16290
16291     Added new command set ID. Buffered write command processing is changed
16292     in order to support M18 flash chips family.
16293
16294     Signed-off-by: Alexey Korolev <akorolev@infradead.org>
16295     Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
16296
16297 commit 93c56f212ccdadc182018f0769cb284426b88f1d
16298 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
16299 Date:   Wed May 7 21:24:44 2008 +0400
16300
16301     cfi_flash: support of long cmd in U-boot.
16302
16303     Some NOR flash chips needs support of commands with length grether than max
16304     value size of uchar. For example all M18 family chips use 0x1ff command in
16305     buffered write mode as value of program loops count.
16306
16307     Signed-off-by: Alexey Korolev <akorolev@infradead.org>
16308     Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
16309
16310 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
16311 Author: Stefan Roese <sr@denx.de>
16312 Date:   Fri May 16 11:06:06 2008 +0200
16313
16314     DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
16315
16316     On AD7414 the first value upon bootup is not read correctly.
16317     This is most likely because of the 800ms update time of the
16318     temp register in normal update mode. To get current values
16319     each time we issue the "dtt" command including upon powerup
16320     we switch into one-short mode.
16321
16322     This patch fixes the problem on AD7414 equipped boards (Sequoia,
16323     Canyonlands etc), that temp value printed in the bootup log was
16324     incorrect.
16325
16326     Signed-off-by: Stefan Roese <sr@denx.de>
16327
16328 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
16329 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16330 Date:   Fri May 30 16:55:06 2008 +0200
16331
16332     ppc4xx: Cleanup CPCI405 variant's config file
16333
16334     This patch removes some dead code from CPCI405 board's
16335     config files. JFFS2 support is also removed. It's not used and
16336     CPCI4052 does not build anymore without some size reduction.
16337
16338     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16339
16340 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
16341 Author: Kenneth Johansson <kenneth@southpole.se>
16342 Date:   Thu May 29 16:32:33 2008 +0200
16343
16344     Remove shell variable UNDEF_SYM.
16345
16346     UNDEF_SYM is a shell variable in the main Makefile used to force the
16347     linker to add all u-boot commands to the final image. It has no use here.
16348
16349     Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
16350
16351 commit 8c66497e06bf803489c589df58ee591d71033274
16352 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16353 Date:   Fri May 16 11:10:35 2008 +0200
16354
16355     Add support for environment in SPI flash
16356
16357     This is pretty incomplete...it doesn't handle reading the environment
16358     before relocation, it doesn't support redundant environment, and it
16359     doesn't support embedded environment. But apart from that, it does
16360     seem to work.
16361
16362     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16363
16364 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
16365 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16366 Date:   Fri May 16 11:10:34 2008 +0200
16367
16368     SPI Flash: Add "sf" command
16369
16370     This adds a new command, "sf" which can be used to manipulate SPI
16371     flash. Currently, initialization, reading, writing and erasing is
16372     supported.
16373
16374     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16375
16376 commit d25ce7d24cc0f93881559f4009175ea305af65e8
16377 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16378 Date:   Fri May 16 11:10:33 2008 +0200
16379
16380     SPI Flash subsystem
16381
16382     This adds a new SPI flash subsystem.
16383
16384     Currently, only AT45 DataFlash in non-power-of-two mode is supported,
16385     but some preliminary support for other flash types is in place as
16386     well.
16387
16388     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16389
16390 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
16391 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
16392 Date:   Fri May 16 11:10:32 2008 +0200
16393
16394     atmel_spi: Driver for the Atmel SPI controller
16395
16396     This adds a driver for the SPI controller found on most AT91 and AVR32
16397     chips, implementing the new SPI API.
16398
16399     Changed in v4:
16400       - Update to new API
16401       - Handle zero-length transfers appropriately. The user may send a
16402         zero-length SPI transfer with SPI_XFER_END set in order to
16403         deactivate the chip select after a series of transfers with chip
16404         select active. This is useful e.g. when polling the status
16405         register of DataFlash.
16406
16407     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16408
16409 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
16410 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16411 Date:   Fri May 16 11:10:31 2008 +0200
16412
16413     SPI API improvements
16414
16415     This patch gets rid of the spi_chipsel table and adds a handful of new
16416     functions that makes the SPI layer cleaner and more flexible.
16417
16418     Instead of the spi_chipsel table, each board that wants to use SPI
16419     gets to implement three hooks:
16420       * spi_cs_activate(): Activates the chipselect for a given slave
16421       * spi_cs_deactivate(): Deactivates the chipselect for a given slave
16422       * spi_cs_is_valid(): Determines if the given bus/chipselect
16423         combination can be activated.
16424
16425     Not all drivers may need those extra functions however. If that's the
16426     case, the board code may just leave them out (assuming they know what
16427     the driver needs) or rely on the linker to strip them out (assuming
16428     --gc-sections is being used.)
16429
16430     To set up communication parameters for a given slave, the driver needs
16431     to call spi_setup_slave(). This returns a pointer to an opaque
16432     spi_slave struct which must be passed as a parameter to subsequent SPI
16433     calls. This struct can be freed by calling spi_free_slave(), but most
16434     driver probably don't want to do this.
16435
16436     Before starting one or more SPI transfers, the driver must call
16437     spi_claim_bus() to gain exclusive access to the SPI bus and initialize
16438     the hardware. When all transfers are done, the driver must call
16439     spi_release_bus() to make the bus available to others, and possibly
16440     shut down the SPI controller hardware.
16441
16442     spi_xfer() behaves mostly the same as before, but it now takes a
16443     spi_slave parameter instead of a spi_chipsel function pointer. It also
16444     got a new parameter, flags, which is used to specify chip select
16445     behaviour. This may be extended with other flags in the future.
16446
16447     This patch has been build-tested on all powerpc and arm boards
16448     involved. I have not tested NIOS since I don't have a toolchain for it
16449     installed, so I expect some breakage there even though I've tried
16450     fixing up everything I could find by visual inspection.
16451
16452     I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
16453     DataFlash drivers posted as a follow-up. I'd like some help testing
16454     other boards that use the existing SPI API.
16455
16456     But most of all, I'd like some comments on the new API. Is this stuff
16457     usable for everyone? If not, why?
16458
16459     Changed in v4:
16460       - Build fixes for various boards, drivers and commands
16461       - Provide common struct spi_slave definition that can be extended by
16462         drivers
16463       - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
16464       - Make default bus and mode build-time configurable
16465       - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
16466
16467     Changed in v3:
16468       - Add opaque struct spi_slave for controller-specific data associated
16469         with a slave.
16470       - Add spi_claim_bus() and spi_release_bus()
16471       - Add spi_free_slave()
16472       - spi_setup() is now called spi_setup_slave() and returns a
16473         struct spi_slave
16474       - soft_spi now supports four SPI modes (CPOL|CPHA)
16475       - Add bus parameter to spi_setup_slave()
16476       - Convert the new i.MX32 SPI driver
16477       - Convert the new MC13783 RTC driver
16478
16479     Changed in v2:
16480       - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
16481         new API.
16482
16483     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16484     Tested-by: Guennadi Liakhovetski <lg@denx.de>
16485
16486 commit 289011207d999b2e4085150d2aa30d547ad9b800
16487 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16488 Date:   Fri May 16 11:10:30 2008 +0200
16489
16490     Move definition of container_of() to common.h
16491
16492     AVR32 and AT91SAM9 both have their own identical definitions of
16493     container_of() taken from the Linux kernel. Move it to common.h so
16494     that all architectures can use it.
16495
16496     container_of() is already used by some drivers, and will be used
16497     extensively by the new and improved SPI API.
16498
16499     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16500
16501 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
16502 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16503 Date:   Fri May 16 11:08:11 2008 +0200
16504
16505     soft_i2c: Pull SDA high before reading
16506
16507     Spotted by Dean Capindale.
16508
16509     Systems that support open-drain GPIO properly are allowed provide an
16510     empty I2C_TRISTATE define. However, this means that we need to be
16511     careful not to drive SDA low when the slave is expected to respond.
16512
16513     This patch adds a missing I2C_SDA(1) to read_byte() required to
16514     tristate the SDA line on systems that support open-drain GPIO.
16515
16516     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16517
16518 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
16519 Author: Stefan Roese <sr@denx.de>
16520 Date:   Mon May 19 11:34:53 2008 +0200
16521
16522     ppc4xx: Remove implementations of testdram()
16523
16524     This patch removes the used testdram() implementations of the board
16525     that are maintained by myself.
16526
16527     Signed-off-by: Stefan Roese <sr@denx.de>
16528
16529 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
16530 Author: Stefan Roese <sr@denx.de>
16531 Date:   Mon Jun 2 17:37:28 2008 +0200
16532
16533     ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
16534
16535     Historically the 405 U-Boot port had a dram_init() call in early init
16536     stage. This function was still called from start.S and most of the time
16537     coded in assembler. This is not needed anymore (since a long time) and
16538     boards should implement the common initdram() function in C instead.
16539
16540     This patch now removed the dram_init() call from start.S and removes the
16541     empty implementations that are scattered through most of the 405 board
16542     ports. Some older board ports really implement this dram_init() though.
16543     These are:
16544
16545     csb272
16546     csb472
16547     ERIC
16548     EXBITGEN
16549     W7OLMC
16550     W7OLMG
16551
16552     I changed those boards to call this assembler dram_init() function now
16553     from their board specific initdram() instead. This *should* work, but please
16554     test again on those platforms. And it is perhaps a good idea that those
16555     boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
16556     some time. So further patches welcome here.
16557
16558     Signed-off-by: Stefan Roese <sr@denx.de>
16559
16560 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
16561 Author: Stefan Roese <sr@denx.de>
16562 Date:   Mon Jun 2 17:22:11 2008 +0200
16563
16564     ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
16565
16566     Signed-off-by: Stefan Roese <sr@denx.de>
16567
16568 commit 39b32be18cd33b53a84065edcd4e465165cc5564
16569 Author: Stefan Roese <sr@denx.de>
16570 Date:   Mon Jun 2 17:20:03 2008 +0200
16571
16572     ppc4xx: Fix common ECC generation code for 440GP style platforms
16573
16574     This patch makes the common 4xx ECC code really usable on 440GP style
16575     platforms.
16576
16577     Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
16578     compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
16579     we need to make some processor dependant defines used later on by the
16580     driver.
16581
16582     Signed-off-by: Stefan Roese <sr@denx.de>
16583
16584 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
16585 Author: Stefan Roese <sr@denx.de>
16586 Date:   Mon Jun 2 17:13:55 2008 +0200
16587
16588     ppc4xx: Change Kilauea to use the common DDR2 init function
16589
16590     This patch changes the kilauea and kilauea_nand (for NAND booting)
16591     board port to not use a board specific DDR2 init routine anymore. Now
16592     the common code from cpu/ppc4xx is used.
16593
16594     Thanks to Grant Erickson for all his basic work on this 405EX early
16595     bootup.
16596
16597     Signed-off-by: Stefan Roese <sr@denx.de>
16598
16599 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
16600 Author: Stefan Roese <sr@denx.de>
16601 Date:   Mon Jun 2 14:59:21 2008 +0200
16602
16603     ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
16604
16605     This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
16606     ppc4xx related SDRAM/DDR/DDR2 controller defines.
16607
16608     Signed-off-by: Stefan Roese <sr@denx.de>
16609
16610 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
16611 Author: Stefan Roese <sr@denx.de>
16612 Date:   Mon Jun 2 14:57:41 2008 +0200
16613
16614     ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
16615
16616     This patch removes all SDRAM related defines from the PPC4xx headers
16617     ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
16618     the same SDRAM controller as 440 systems do (like 405EX and 440SP).
16619
16620     It also introduces new defines for the equipped SDRAM controller based on
16621     which PPC variant is used. There new defines are:
16622
16623     used on 405GR/CR/EP and some Xilinx Virtex boards.
16624
16625     used on 440GP/GX/EP/GR.
16626
16627     used on 440EPx/GRx.
16628
16629     used on 405EX/r/440SP/SPe/460EX/GT.
16630
16631     Signed-off-by: Stefan Roese <sr@denx.de>
16632
16633 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
16634 Author: Stefan Roese <sr@denx.de>
16635 Date:   Mon Jun 2 14:35:44 2008 +0200
16636
16637     ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
16638
16639     This patch consolidates the 405 and 440 parts of the NAND booting code
16640     selected via CONFIG_NAND_SPL. Now common code is used to initialize the
16641     SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
16642     Only *after* running from this location, nand_boot() is called.
16643
16644     Please note that the initsdram() call is now moved from nand_boot.c
16645     to start.S. I experienced problems with some boards like Kilauea
16646     (405EX), which don't have internal SRAM (OCM) and relocation needs to
16647     be done to SDRAM before the NAND controller can get accessed. When
16648     initdram() is called later on in nand_boot(), this can lead to problems
16649     with variables in the bss sections like nand_ecc_pos[].
16650
16651     Signed-off-by: Stefan Roese <sr@denx.de>
16652     Acked-by: Scott Wood <scottwood@freescale.com>
16653
16654 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
16655 Author: Grant Erickson <gerickson@nuovations.com>
16656 Date:   Thu May 22 14:44:24 2008 -0700
16657
16658     ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
16659
16660     This patch (Part 2 of 2):
16661
16662     * Rolls up a suite of changes to enable correct primordial stack and
16663       global data handling when the data cache is used for such a purpose
16664       for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
16665
16666     * Related to the first, unifies DDR2 SDRAM and ECC initialization by
16667       eliminating redundant ECC initialization implementations and moving
16668       redundant SDRAM initialization out of board code into shared 4xx
16669       code.
16670
16671     * Enables MCSR visibility on the 405EX(r).
16672
16673     * Enables the use of the data cache for initial RAM on
16674       both AMCC's Kilauea and Makalu and removes a redundant
16675       CFG_POST_MEMORY flag from each board's CONFIG_POST value.
16676
16677       - Removed, per Stefan Roese's request, defunct memory.c file for
16678         Makalu and rolled sdram_init from it into makalu.c.
16679
16680     With respect to the 4xx DDR initialization and ECC unification, there
16681     is certainly more work that can and should be done (file renaming,
16682     etc.). However, that can be handled at a later date on a second or
16683     third pass. As it stands, this patch moves things forward in an
16684     incremental yet positive way for those platforms that utilize this
16685     code and the features associated with it.
16686
16687     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
16688     Signed-off-by: Stefan Roese <sr@denx.de>
16689
16690 commit c821b5f120bedf73867513466412587c6912a8f8
16691 Author: Grant Erickson <gerickson@nuovations.com>
16692 Date:   Thu May 22 14:44:14 2008 -0700
16693
16694     ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
16695
16696     This patch (Part 1 of 2):
16697
16698     * Rolls up a suite of changes to enable correct primordial stack and
16699       global data handling when the data cache is used for such a purpose
16700       for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
16701
16702     * Related to the first, unifies DDR2 SDRAM and ECC initialization by
16703       eliminating redundant ECC initialization implementations and moving
16704       redundant SDRAM initialization out of board code into shared 4xx
16705       code.
16706
16707     * Enables MCSR visibility on the 405EX(r).
16708
16709     * Enables the use of the data cache for initial RAM on
16710       both AMCC's Kilauea and Makalu and removes a redundant
16711       CFG_POST_MEMORY flag from each board's CONFIG_POST value.
16712
16713       - Removed, per Stefan Roese's request, defunct memory.c file for
16714         Makalu and rolled sdram_init from it into makalu.c.
16715
16716     With respect to the 4xx DDR initialization and ECC unification, there
16717     is certainly more work that can and should be done (file renaming,
16718     etc.). However, that can be handled at a later date on a second or
16719     third pass. As it stands, this patch moves things forward in an
16720     incremental yet positive way for those platforms that utilize this
16721     code and the features associated with it.
16722
16723     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
16724     Signed-off-by: Stefan Roese <sr@denx.de>
16725
16726 commit a439680019e06171d4a5694b7992accce87f590e
16727 Author: Grant Erickson <gerickson@nuovations.com>
16728 Date:   Wed May 21 13:28:30 2008 -0700
16729
16730     PPC4xx: Simplified post_word_{load, store}
16731
16732     This patch simplifies post_word_{load,store} by using the preprocessor
16733     to eliminate redundant, copy-and-pasted code.
16734
16735     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
16736
16737 commit f979690ee337450b2030aba128f95b7a8d9881c0
16738 Author: Kumar Gala <galak@kernel.crashing.org>
16739 Date:   Thu May 15 15:13:08 2008 -0500
16740
16741     Fix warnings from gcc-4.3.0 build on a ppc host
16742
16743     * The cfi_flash.c memset fix actual allows the board to boot so there is
16744       a bit more going on here than just resolving warnings associated with
16745       uninitialized variables.
16746
16747     * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
16748       inline function 'ext2_find_next_zero_bit' which is not static
16749
16750     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16751
16752 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
16753 Author: Becky Bruce <becky.bruce@freescale.com>
16754 Date:   Wed May 14 13:09:51 2008 -0500
16755
16756     MPC512x: Change traps.c to not reference non-addressable memory
16757
16758     Currently, END_OF_RAM is used by the trap code to determine if
16759     we should attempt to access the stack pointer or not. However,
16760     on systems with a lot of RAM, only a subset of the RAM is
16761     guaranteed to be mapped in and accessible.  Change END_OF_RAM
16762     to use get_effective_memsize() instead of using the raw ram
16763     size out of the bd.
16764
16765     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
16766
16767 commit 81673e9ae14b771cd13faf19947192599cae3959
16768 Author: Kumar Gala <galak@kernel.crashing.org>
16769 Date:   Tue May 13 19:01:54 2008 -0500
16770
16771     Make sure common.h is the first include.
16772
16773     If common.h isn't first we can get CONFIG_ options defined in the
16774     board config file ignored.  This can cause an issue if any of those
16775     config options impact the size of types of data structures
16776     (eg CONFIG_PHYS_64BIT).
16777
16778     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16779
16780 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
16781 Author: Marian Balakowicz <m8@semihalf.com>
16782 Date:   Tue May 13 15:53:29 2008 +0200
16783
16784     Avoid initrd and logbuffer area overlaps
16785
16786     Add logbuffer to reserved LMB areas to prevent initrd allocation
16787     from overlaping with it.
16788
16789     Make sure to use correct logbuffer base address.
16790
16791     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
16792
16793 commit 6956d53d9934862507f83f0e3255dfd4662e7482
16794 Author: Sascha Laue <sascha.laue@liebherr.com>
16795 Date:   Tue May 13 13:29:54 2008 +0200
16796
16797     lwmon5: add memory-pattern-test to FPGA POST.
16798
16799 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
16800 Author: Becky Bruce <becky.bruce@freescale.com>
16801 Date:   Thu May 8 19:02:51 2008 -0500
16802
16803     PPC: 86xx Add bat registers to reginfo command
16804
16805     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
16806
16807 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
16808 Author: Becky Bruce <becky.bruce@freescale.com>
16809 Date:   Fri May 9 15:41:35 2008 -0500
16810
16811     PPC: Add print_bats() to lib_ppc/bat_rw.c
16812
16813     This function prints the values of all the BAT register
16814     pairs - I needed this for debug earlier this week; adding it to
16815     lib_ppc so others can use it (and add it to reginfo commands
16816     if so desired).
16817
16818     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
16819
16820 commit c148f24c15743a02e855636e6bed013bd121f7f2
16821 Author: Becky Bruce <becky.bruce@freescale.com>
16822 Date:   Thu May 15 21:29:04 2008 -0500
16823
16824     PPC: Change lib_ppc/bat_rw.c to use high bats
16825
16826     Currently, this code only deals with BATs 0-3, which makes
16827     it useless on systems that support BATs 4-7.  Add the
16828     support for these registers.
16829
16830     Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
16831
16832 commit 31d826722434931e1152a09d140187dcf72f8aac
16833 Author: Becky Bruce <becky.bruce@freescale.com>
16834 Date:   Thu May 8 19:02:12 2008 -0500
16835
16836     PPC: Create and use CONFIG_HIGH_BATS
16837
16838     Change all code that conditionally operates on high bat
16839     registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
16840     instead of the myriad ways this is done now.  Define the option
16841     for every config for which high bats are supported (and
16842     enabled by early boot, on parts where they're not always
16843     enabled)
16844
16845     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
16846
16847 commit aa3b8bf9c30065bb2ea852799d32db5020598495
16848 Author: Wolfgang Grandegger <wg@grandegger.com>
16849 Date:   Wed May 28 19:55:19 2008 +0200
16850
16851     E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
16852
16853     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
16854     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16855
16856 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
16857 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16858 Date:   Wed May 28 13:06:25 2008 -0500
16859
16860     ColdFire: Add 10 base ethernet support for mcf5445x
16861
16862     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16863     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16864
16865 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
16866 Author: Jason McMullan <mcmullan@netapp.com>
16867 Date:   Fri May 30 00:53:38 2008 +0900
16868
16869     mips: Add an 'include/asm/errno.h', like all other architectures
16870
16871     All other u-boot architectures have an include/asm/errno.h, so
16872     this change adds it to the mips include/asm-mips headers also.
16873
16874     Stolen from Linux 2.6.25.
16875
16876     Signed-off-by: Jason McMullan <mcmullan@netapp.com>
16877
16878 commit e2ad8426624bac457acc6925b6ff408e9bf20466
16879 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16880 Date:   Fri May 30 00:53:38 2008 +0900
16881
16882     [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
16883
16884     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16885
16886 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
16887 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16888 Date:   Fri May 30 00:53:38 2008 +0900
16889
16890     [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
16891
16892     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16893
16894 commit bf462ae450a7f2eeeddc699ed345b391e3263540
16895 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16896 Date:   Fri May 30 00:53:37 2008 +0900
16897
16898     [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
16899
16900     No functional changes.
16901
16902     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16903
16904 commit 89a1550ec6b74452274a7a23127936e2c7eec711
16905 Author: Jason McMullan <mcmullan@netapp.com>
16906 Date:   Fri May 30 00:53:37 2008 +0900
16907
16908     mips: If CONFIG_CMD_SPI is defined, call spi_init()
16909
16910     The mips architecture currently does not call 'spi_init()' in the generic
16911     board initialization routine is CONFIG_CMD_SPI is defined.
16912
16913     This patch rectifies that problem.
16914
16915     Signed-off-by: Jason McMullan <mcmullan@netapp.com>
16916     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16917
16918 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
16919 Author: Jason McMullan <mcmullan@netapp.com>
16920 Date:   Fri May 30 00:53:37 2008 +0900
16921
16922     [MIPS] lib_mips/board.c: Add nand_init
16923
16924     This patch adds the standard 'nand_init()' call to the mips generic
16925     'board_init_r()' call, bringing MIPS in line with the other architectures.
16926
16927     Signed-off-by: Jason McMullan <mcmullan@netapp.com>
16928     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
16929
16930 commit d6ac2ed893c2168738aee01579d6283af8d37045
16931 Author: Scott Wood <scottwood@freescale.com>
16932 Date:   Thu May 22 10:49:46 2008 -0500
16933
16934     Remove prototypes of nand_init() in favor of including nand.h.
16935
16936     Likewise with onenand_init().
16937
16938     Signed-off-by: Scott Wood <scottwood@freescale.com>
16939
16940 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
16941 Author: Scott Wood <scottwood@freescale.com>
16942 Date:   Thu May 22 10:49:00 2008 -0500
16943
16944     Make onenand_uboot.h self-sufficient.
16945
16946     Don't assume types are provided by previously included headers.
16947
16948     Signed-off-by: Scott Wood <scottwood@freescale.com>
16949
16950 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
16951 Author: Dirk Behme <dirk.behme@gmail.com>
16952 Date:   Wed Jan 16 14:26:59 2008 +0100
16953
16954     nand: Correct NAND erase percentage output
16955
16956     For NAND erase sizes smaller than one NAND erase block, erase
16957     percentage output becomes grater than 100% e.g.
16958
16959     -- cut --
16960       > nand info
16961     Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
16962       > nand erase 0x100000 0x2000
16963     NAND erase: device 0 offset 0x100000, size 0x2000
16964     Erasing at 0x100000 -- 200% complete.
16965     OK
16966       >
16967     -- cut --
16968
16969     Correct this and give user a warning that more is erased than specified:
16970
16971     -- cut --
16972       > nand erase 0x100000 0x2000
16973     NAND erase: device 0 offset 0x100000, size 0x2000
16974     Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
16975                Erasing 0x00004000 instead
16976     Erasing at 0x100000 -- 100% complete.
16977     OK
16978       >
16979     -- cut --
16980
16981     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
16982
16983 commit 5922db6c0948506be91e0de44e7a6863a18a417f
16984 Author: Stelian Pop <stelian@popies.net>
16985 Date:   Tue May 13 17:31:24 2008 +0200
16986
16987     Cleanup nand_info[] declaration.
16988
16989     The nand_info array is declared as extern in several .c files.
16990     Those days, nand.h contains a reference to the array, so there is
16991     no need to declare it elsewhere.
16992
16993     Signed-off-by: Stelian Pop <stelian@popies.net>
16994     Signed-off-by: Scott Wood <scottwood@freescale.com>
16995
16996 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
16997 Author: Scott Wood <scottwood@freescale.com>
16998 Date:   Mon May 19 09:30:43 2008 -0500
16999
17000     NAND: Provide a sane default for NAND_MAX_CHIPS.
17001
17002     This allows the header to be included regardless of whether a board's
17003     config file provides NAND-related defininitions.
17004
17005     Signed-off-by: Scott Wood <scottwood@freescale.com>
17006
17007 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
17008 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17009 Date:   Mon May 26 12:19:10 2008 +0200
17010
17011     avr32: Fix theoretical race in udelay()
17012
17013     If the specified delay is very short, the cycle counter may go past the
17014     "end" time we are waiting for before we get around to reading it.
17015
17016     Fix it by checking the different between the cycle count "now" and the
17017     cycle count at the beginning. This will work as long as the delay
17018     measured in number of cycles is below 2^31.
17019
17020     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17021
17022 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
17023 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17024 Date:   Wed May 21 13:01:09 2008 +0200
17025
17026     avr32: Compile atmel_mci.o conditionally
17027
17028     Remove #ifdef CONFIG_MMC from the source file and use conditional
17029     compilation in the Makefile instead.
17030
17031     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17032
17033 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
17034 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17035 Date:   Thu May 22 12:28:25 2008 +0200
17036
17037     avr32: Fix wrong error flags in atmel_mci driver
17038
17039     Make sure we check for CRC errors when sending commands that use CRC
17040     checking.
17041
17042     Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
17043     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17044
17045 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
17046 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17047 Date:   Wed May 21 11:10:59 2008 +0200
17048
17049     avr32: Fix two warnings in atmel_mci.c
17050
17051     The warnings are harmless but annoying. Let's fix them.
17052
17053     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17054
17055 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
17056 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17057 Date:   Mon May 19 11:36:28 2008 +0200
17058
17059     avr32: Rework SDRAM initialization code
17060
17061     This cleans up the SDRAM initialization and related code a bit, and
17062     allows faster booting.
17063
17064       * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
17065       * Remove memory test from sdram_init() and make caller responsible
17066         for verifying the SDRAM and determining its size.
17067       * Remove base_address member from struct sdram_config (was sdram_info)
17068       * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
17069       * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
17070
17071     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17072
17073 commit 95107b7c028806919630bf02c653aa8f4f867c94
17074 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17075 Date:   Mon May 19 11:27:37 2008 +0200
17076
17077     avr32: Do stricter stack checking in the exception handler
17078
17079     Don't do a stack dump if the stack pointer is outside the memory area
17080     reserved for stack.
17081
17082     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17083
17084 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
17085 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17086 Date:   Fri May 2 15:32:57 2008 +0200
17087
17088     avr32: Use the same entry point for reset and exception handling
17089
17090     Since the reset vector is always aligned to a very large boundary, we
17091     can save a couple of KB worth of alignment padding by placing the
17092     exception vectors at the same address.
17093
17094     Deciding which one it is is easy: If we're handling an exception, the
17095     CPU is in Exception mode. If we're starting up after reset, the CPU is
17096     in Supervisor mode. So this adds a very minimal overhead to the reset
17097     path (only executed once) and the exception handling path (normally
17098     never executed at all.)
17099
17100     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17101
17102 commit 0c16eed2189a190bd5655b33c029f809a9b31128
17103 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17104 Date:   Fri May 2 15:24:22 2008 +0200
17105
17106     avr32: Put memset in its own section
17107
17108     All C code is compiled with -ffunction-sections -fdata-sections.
17109     Assembly functions should get their own sections as well so that
17110     everything looks consistent.
17111
17112     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17113
17114 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
17115 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17116 Date:   Fri May 2 15:21:40 2008 +0200
17117
17118     avr32: Rename pm_init() as clk_init() and make SoC-specific
17119
17120     pm_init() was always more about clock initialization than anything
17121     else. Dealing with PLLs, clock gating and such is also inherently
17122     SoC-specific, so move it into a SoC-specific directory.
17123
17124     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17125
17126 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
17127 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17128 Date:   Wed Apr 30 16:15:57 2008 +0200
17129
17130     avr32: Use new-style Makefile for the at32ap platform
17131
17132     This makes it easier to avoid compiling certain files later.
17133
17134     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17135
17136 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
17137 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17138 Date:   Wed Apr 30 14:36:47 2008 +0200
17139
17140     avr32: Remove unused file cpu/at32ap/pm.c
17141
17142     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17143
17144 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
17145 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17146 Date:   Wed Apr 30 14:19:28 2008 +0200
17147
17148     avr32: Clean up the HMATRIX code
17149
17150     Rework the HMATRIX configuration interface so that it becomes easier
17151     to configure the HMATRIX for boards with special needs, and add new
17152     parts.
17153
17154     The HMATRIX header file has been split into a general,
17155     chip-independent part with register definitions, etc. and a
17156     chip-specific part with SFR bitfield definitions and master/slave
17157     identifiers.
17158
17159     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17160
17161 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
17162 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17163 Date:   Thu Nov 22 12:14:11 2007 +0100
17164
17165     avr32: Add support for the ATSTK1006 board
17166
17167     This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
17168     board. It's currently in production and will be available soon.
17169
17170     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17171
17172 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
17173 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17174 Date:   Tue Apr 29 12:53:05 2008 +0200
17175
17176     avr32: Get rid of the .flashprog section
17177
17178     The .flashprog section was only needed back when we were running
17179     directly from flash, and it's even more useless on NGW100 since it
17180     uses the CFI flash driver which never used this workaround in the
17181     first place.
17182
17183     Remove it on STK1000 as well, and get rid of all the associated code and
17184     annotations.
17185
17186     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17187
17188 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
17189 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17190 Date:   Wed Apr 30 13:09:56 2008 +0200
17191
17192     avr32: Use correct condition around macb clock accessors
17193
17194     get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
17195     the chip has a MACB controller, not when it has a USART.
17196
17197     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17198
17199 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
17200 Author: David Brownell <david-b@pacbell.net>
17201 Date:   Wed Apr 16 22:57:58 2008 -0700
17202
17203     avr32: Disable the AP7000 internal watchdog on startup
17204
17205     This patch forces the watchdog off in all cases.  That will at least
17206     get rid of the constant reboot cycle, though it won't let the watchdog
17207     actually run in the new kernels:  its probe() comes up with a polite
17208     warning.
17209
17210     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17211
17212 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
17213 Author: David Brownell <david-b@pacbell.net>
17214 Date:   Fri Feb 22 12:54:39 2008 -0800
17215
17216     avr32: stk1002 and ngw100 convergence
17217
17218     Make STK1002 and NGW100 boards act more alike:
17219       - STK boards can use as many arguments as NGW
17220       - STK boards don't need to manage FPGAs either
17221       - NGW commands should match STK ones
17222
17223     Also spell U-Boot right in prompts for STK1002 and NGW100.
17224
17225     Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
17226     [haavard.skinnemoen@atmel.com: update STK100[34] as well]
17227     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17228
17229 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
17230 Author: Sergei Poselenov <sposelenov@emcraft.com>
17231 Date:   Tue May 27 13:47:00 2008 +0200
17232
17233     Socrates: Fix PCI bus frequency report
17234
17235     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17236
17237 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
17238 Author: Sergei Poselenov <sposelenov@emcraft.com>
17239 Date:   Tue May 27 11:49:13 2008 +0200
17240
17241     Socrates: Added USB support.
17242
17243     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17244
17245 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
17246 Author: Sergei Poselenov <sposelenov@emcraft.com>
17247 Date:   Tue May 27 11:35:02 2008 +0200
17248
17249     USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
17250
17251     In case of several PCI USB controllers on a board this variable
17252     specifys which controller to use.
17253     See doc/README.generic_usb_ohci for details.
17254
17255     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17256
17257 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
17258 Author: Sergei Poselenov <sposelenov@emcraft.com>
17259 Date:   Tue May 27 10:36:07 2008 +0200
17260
17261     Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
17262
17263     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17264
17265 commit 83e9d7a2614d4006b92690afa3390c291734267e
17266 Author: Sergei Poselenov <sposelenov@emcraft.com>
17267 Date:   Mon May 26 18:16:04 2008 +0200
17268
17269     Socrates: Config file cleanup.
17270
17271     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17272
17273 commit 602cac1389b755b223272f2328a47e6f8c240848
17274 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17275 Date:   Sat May 24 12:47:46 2008 +0200
17276
17277     MAKEALL: add at91 list
17278
17279     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17280
17281 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
17282 Author: Ron Madrid <ron_madrid@sbcglobal.net>
17283 Date:   Fri May 23 15:37:05 2008 -0700
17284
17285     Add Marvell 88E1118 support for TSEC
17286
17287     Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
17288     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
17289
17290 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
17291 Author: Jens Gehrlein <sew_s@tqs.de>
17292 Date:   Mon May 5 14:06:11 2008 +0200
17293
17294     smc911x: add 16 bit support
17295
17296     Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
17297     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
17298
17299 commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
17300 Author: Christian Eggers <ceggers@gmx.de>
17301 Date:   Wed May 21 21:29:10 2008 +0200
17302
17303     Fix endianess conversion in usb_ohci.c
17304
17305     Sorry, I forgot this line:
17306
17307     Signed-off-by: Christian Eggers <ceggers@gmx.de>
17308
17309     I think this must be swapped (result may be equal).
17310
17311 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
17312 Author: Christian Eggers <ceggers@gmx.de>
17313 Date:   Wed May 21 22:12:00 2008 +0200
17314
17315     USB: replace old swap_ with proper endianess conversion macros
17316
17317     Signed-off-by: Christian Eggers <ceggers@gmx.de>
17318     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17319
17320 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
17321 Author: Christian Eggers <ceggers@gmx.de>
17322 Date:   Wed May 21 21:29:10 2008 +0200
17323
17324     Fix endianess conversion in usb_ohci.c
17325
17326     Signed-off-by: Christian Eggers <ceggers@gmx.de>
17327     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17328
17329 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
17330 Author: Sergei Poselenov <sposelenov@emcraft.com>
17331 Date:   Thu May 22 01:15:53 2008 +0200
17332
17333     USB: add support for multiple PCI OHCI controllers
17334
17335     Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
17336     In case of several PCI USB controllers on a board this variable
17337     specifys which controller to use.
17338
17339     Also add USB support for sokrates board.
17340
17341     See doc/README.generic_usb_ohci for details.
17342
17343     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17344     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17345
17346 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
17347 Author: Wolfgang Denk <wd@denx.de>
17348 Date:   Wed May 21 16:56:08 2008 +0200
17349
17350     Fix some whitespace issues
17351
17352     introduced by 53677ef18 "Big white-space cleanup."
17353
17354     Signed-off-by: Wolfgang Denk <wd@denx.de>
17355
17356 commit 4416603aeb06861b468b06a981e52c3ff805db7b
17357 Author: York Sun <yorksun@freescale.com>
17358 Date:   Mon May 12 14:36:39 2008 -0500
17359
17360     Make ads5121 out-of-tree compiling safe
17361
17362     Reuse the existing DIU driver in board/freescale/common.
17363
17364     Signed-off-by: York Sun <yorksun@freescale.com>
17365
17366 commit 0e1bad47cd345c76c91a64caf41011e431b62599
17367 Author: York Sun <yorksun@freescale.com>
17368 Date:   Mon May 5 10:20:01 2008 -0500
17369
17370     Adding DIU support for Freescale 5121ADS
17371
17372     Add DIU and cfb console support to FSL 5121ADS board.
17373
17374     Use #define CONFIG_VIDEO in config file to enable fb console.
17375
17376     Signed-off-by: York Sun <yorksun@freescale.com>
17377
17378 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
17379 Author: York Sun <yorksun@freescale.com>
17380 Date:   Mon May 5 10:20:00 2008 -0500
17381
17382     Replace DPRINTF with debug
17383
17384     Remove DPRINTF macro and replace it with generic debug macro.
17385
17386     Signed-off-by: York Sun <yorksun@freescale.com>
17387
17388 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
17389 Author: York Sun <yorksun@freescale.com>
17390 Date:   Mon May 5 10:19:59 2008 -0500
17391
17392     Move pixel clock setting to board file
17393
17394     The clock divider has different format in 5121 and 8610. This patch moves it to
17395     board specific code.
17396
17397     Signed-off-by: York Sun <yorksun@freescale.com>
17398
17399 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
17400 Author: Wolfgang Denk <wd@denx.de>
17401 Date:   Tue May 20 16:00:29 2008 +0200
17402
17403     Big white-space cleanup.
17404
17405     This commit gets rid of a huge amount of silly white-space issues.
17406     Especially, all sequences of SPACEs followed by TAB characters get
17407     removed (unless they appear in print statements).
17408
17409     Also remove all embedded "vim:" and "vi:" statements which hide
17410     indentation problems.
17411
17412     Signed-off-by: Wolfgang Denk <wd@denx.de>
17413
17414 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
17415 Author: Sergei Poselenov <sposelenov@emcraft.com>
17416 Date:   Thu May 8 17:46:23 2008 +0200
17417
17418     socrates: fix second TSEC configuration (it is actually TSEC3)
17419
17420     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17421
17422 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
17423 Author: Sergei Poselenov <sposelenov@emcraft.com>
17424 Date:   Thu May 8 14:17:08 2008 +0200
17425
17426     Fixed reset for socrates
17427
17428     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17429
17430 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
17431 Author: Sergei Poselenov <sposelenov@emcraft.com>
17432 Date:   Wed May 7 15:10:49 2008 +0200
17433
17434     socrates: changes to support FDT
17435
17436     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17437     Signed-off-by: Wolfgang Denk <wd@denx.de>
17438
17439 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
17440 Author: Sergei Poselenov <sposelenov@emcraft.com>
17441 Date:   Wed Apr 30 11:42:50 2008 +0200
17442
17443     Initial support for "Socrates" board
17444
17445     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17446
17447 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
17448 Author: Yuri Tikhonov <yur@emcraft.com>
17449 Date:   Thu May 8 15:46:42 2008 +0200
17450
17451     POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
17452
17453     This way we become able to utilize the full post_log_word for POST
17454     activities (overwise, POST ECC, which has 0x8000 ID, could be
17455     erroneously treated as started in post_output_backlog() even if there
17456     was actually no POST ECC run (because of OCM POST failure, for
17457     example).
17458
17459     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
17460
17461 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
17462 Author: Yuri Tikhonov <yur@emcraft.com>
17463 Date:   Thu May 8 15:46:02 2008 +0200
17464
17465     POST: mark OCM test as POST_STOP
17466
17467     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
17468
17469 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
17470 Author: Yuri Tikhonov <yur@emcraft.com>
17471 Date:   Thu May 8 15:45:26 2008 +0200
17472
17473     POST: add POST_STOP flag
17474
17475     Don't run futher tests in case of a test fails that is marked as
17476     POST_STOP.
17477
17478     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
17479     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
17480
17481 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
17482 Author: Yuri Tikhonov <yur@emcraft.com>
17483 Date:   Thu May 8 15:44:16 2008 +0200
17484
17485     POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
17486
17487     Switch the OCM testid with the codec one. The reason is that current
17488     implementation requires the POST_ROM testid to fit into lower 16
17489     bits, and the codec test will never run with POST_ROM hopefully.
17490
17491     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
17492
17493 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
17494 Author: Yuri Tikhonov <yur@emcraft.com>
17495 Date:   Thu May 8 15:43:28 2008 +0200
17496
17497     lwmon5: enable OCM post test on lwmon5 board
17498
17499     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
17500
17501 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
17502 Author: Yuri Tikhonov <yur@emcraft.com>
17503 Date:   Thu May 8 15:42:47 2008 +0200
17504
17505     POST: OCM test added.
17506
17507     Added OCM test to POST layer. This version runs before all other tests
17508     but doesn't yet interrupt post sequence on failure.
17509
17510     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
17511     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
17512
17513 commit 6891260bdd935a382c95d9fa333922b0dfded68a
17514 Author: Yuri Tikhonov <yur@emcraft.com>
17515 Date:   Thu May 8 15:40:39 2008 +0200
17516
17517     POST: typo fix
17518
17519     Signed-off-by: Ilya Yanok <yanok@emcraft.com>
17520
17521 commit 727f63334676e760877d43bfb8f0e9331ac8b101
17522 Author: Hebbar <gururajakr@sanyo.co.in>
17523 Date:   Tue May 20 02:16:36 2008 -0700
17524
17525     common/usb.c: fix incorrect escape sequence
17526
17527     Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
17528
17529 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
17530 Author: York Sun <yorksun@freescale.com>
17531 Date:   Thu May 15 15:26:27 2008 -0500
17532
17533     Fix 8313ERDB board configuration
17534
17535     Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
17536     Correct TSEC1 vs TSEC2 assignment.
17537     Define ETHADDR and ETH1ADDR always.
17538
17539     Signed-off-by: York Sun <yorksun@freescale.com>
17540     Signed-off-by: Timur Tabi <timur@freescale.com>
17541
17542 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
17543 Author: Jon Loeliger <jdl@freescale.com>
17544 Date:   Mon May 19 09:47:25 2008 -0500
17545
17546     mpc86xx: Removed unused and unconfigured memory test code.
17547
17548     Besides, other common code exists.
17549
17550     Signed-off-by: Jon Loeliger <jdl@freescale.com>
17551
17552 commit 180a90abdae72587c0f679edf8991455e559440d
17553 Author: Wolfgang Denk <wd@denx.de>
17554 Date:   Mon May 19 12:47:11 2008 +0200
17555
17556     Release v1.3.3
17557
17558     Update CHANGELOG for release.
17559
17560     Signed-off-by: Wolfgang Denk <wd@denx.de>
17561
17562 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
17563 Author: Stefan Roese <sr@denx.de>
17564 Date:   Mon May 19 07:14:38 2008 +0200
17565
17566     ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
17567
17568     When SATA is selected (via jumper J6) we need to disable the first PCIe
17569     node in the device tree, so that Linux doesn't initialize it. Otherwise
17570     the Linux SATA driver will fail to detect the devices.
17571
17572     The same goes the other way around too. So if PCIe is selected we need
17573     to disable the SATA node in the device tree.
17574
17575     This is because PCIe port 0 and SATA on 460EX share the same pins
17576     (multiplexed) and we have to configure in U-Boot which peripheral is
17577     enabled.
17578
17579     Signed-off-by: Stefan Roese <sr@denx.de>
17580
17581 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
17582 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17583 Date:   Sun May 18 19:09:58 2008 +0200
17584
17585     i386: Fix multiple definitions of __show_boot_progress
17586
17587     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17588
17589 commit 311f3446930c1e64c12026c1cfd00500b05be52d
17590 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17591 Date:   Sun May 18 19:09:57 2008 +0200
17592
17593     sc530_spunk: add missing SOBJS entry
17594
17595     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17596
17597 commit a559317143b4f95927b08cd388707e6f077e95fa
17598 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17599 Date:   Sun May 18 19:09:56 2008 +0200
17600
17601     sc520_spunk: Fix flash
17602
17603     flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
17604     flash.c:398: error: label at end of compound statement
17605
17606     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17607
17608 commit 91f221317af64191ee8caf303ea9305943158691
17609 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17610 Date:   Sun May 18 19:09:49 2008 +0200
17611
17612     drivers/pcmcia: add missing i82365
17613
17614     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17615
17616 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
17617 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17618 Date:   Sun May 18 19:09:47 2008 +0200
17619
17620     i386/bootm: remove unused var
17621
17622     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17623
17624 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
17625 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17626 Date:   Sun May 18 19:09:45 2008 +0200
17627
17628     example/gitignore: update with all generated examples
17629
17630     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17631
17632 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
17633 Author: Wolfgang Denk <wd@denx.de>
17634 Date:   Thu May 15 00:42:45 2008 +0200
17635
17636     TQM8272: fix out-of-tree building
17637
17638     ...and add to MAKEALL script
17639
17640     Signed-off-by: Wolfgang Denk <wd@denx.de>
17641
17642 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
17643 Author: Wolfgang Denk <wd@denx.de>
17644 Date:   Wed May 14 23:34:53 2008 +0200
17645
17646     environment: fix bug introduced by commit a8409f4f1ac8
17647
17648     env_get_char is not a function, but a pointer to one.
17649
17650     Signed-off-by: Wolfgang Denk <wd@denx.de>
17651
17652 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
17653 Author: Gary Jennejohn <garyj@denx.de>
17654 Date:   Wed May 14 13:39:22 2008 +0200
17655
17656     ppc4xx: QUAD100HD: Allow the environment to be put into flash.
17657
17658     After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect.  Also
17659     use a redundant environment.
17660
17661     Signed-off-by: Gary Jennejohn <garyj@denx.de>
17662
17663 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
17664 Author: Wolfgang Denk <wd@denx.de>
17665 Date:   Wed May 14 13:55:30 2008 +0200
17666
17667     Fix config files for out-of-tree building
17668
17669     Several board/<...>/config.mk files include dynamically built (by
17670     the Makefile) config files but used the wrong file name of
17671         $(TOPDIR)/board/$(BOARDDIR)/config.tmp
17672     instead if the correct
17673         $(OBJTREE)/board/$(BOARDDIR)/config.tmp
17674
17675     The bug is nasty because the build result is correct for the (normal)
17676     in-tree builds, and because 'sinclude' is used no errors get raised
17677     even for out-of-tree build tests. But out-of-tree builds use an
17678     incomplete and thus usually incorrect configuration...
17679
17680     Signed-off-by: Wolfgang Denk <wd@denx.de>
17681
17682 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
17683 Author: Stefan Roese <sr@denx.de>
17684 Date:   Wed May 14 13:40:03 2008 +0200
17685
17686     ppc4xx: Fix bogus Canyonlands config.mk
17687
17688     This patch fixes the canyonlands config.mk file to enable correct
17689     out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
17690
17691     Signed-off-by: Stefan Roese <sr@denx.de>
17692
17693 commit fdd1247a66d788a3446244f6fde9955a93c26322
17694 Author: Stefan Roese <sr@denx.de>
17695 Date:   Wed May 14 10:32:32 2008 +0200
17696
17697     ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
17698
17699     Canyonlands has a file ddr2_fixed.c which needs special treatment when
17700     building in separate directory. It has to be linked to build directory
17701     otherwise it is not seen.
17702
17703     Signed-off-by: Stefan Roese <sr@denx.de>
17704
17705 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
17706 Author: Wolfgang Denk <wd@denx.de>
17707 Date:   Wed May 14 12:22:49 2008 +0200
17708
17709     environment: cleanup prototype declarations of env functions.
17710
17711     Signed-off-by: Wolfgang Denk <wd@denx.de>
17712
17713 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
17714 Author: Wolfgang Denk <wd@denx.de>
17715 Date:   Wed May 14 12:21:48 2008 +0200
17716
17717     linkstation_HGLAN: Fix out of tree building.
17718
17719     Signed-off-by: Wolfgang Denk <wd@denx.de>
17720
17721 commit 085551c05ca09e6c491ea11a1c6727a36776a545
17722 Author: Stefan Roese <sr@denx.de>
17723 Date:   Wed May 14 10:32:32 2008 +0200
17724
17725     ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
17726
17727     Canyonlands has a file ddr2_fixed.c which needs special treatment when
17728     building in separate directory. It has to be linked to build directory
17729     otherwise it is not seen.
17730
17731     Signed-off-by: Stefan Roese <sr@denx.de>
17732
17733 commit 1510b82d50615f344e89d42533e8224cce067dc0
17734 Author: Wolfgang Denk <wd@denx.de>
17735 Date:   Tue May 13 23:15:52 2008 +0200
17736
17737     Makefile: fix "error: version_autogenerated.h: No such file or directory"
17738
17739     Signed-off-by: Wolfgang Denk <wd@denx.de>
17740
17741 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
17742 Author: Stelian Pop <stelian@popies.net>
17743 Date:   Tue May 13 17:31:24 2008 +0200
17744
17745     Cleanup nand_info[] declaration.
17746
17747     The nand_info array is declared as extern in several .c files.
17748     Those days, nand.h contains a reference to the array, so there is
17749     no need to declare it elsewhere.
17750
17751     Signed-off-by: Stelian Pop <stelian@popies.net>
17752     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17753
17754 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
17755 Author: Stefan Roese <sr@denx.de>
17756 Date:   Tue May 13 20:22:01 2008 +0200
17757
17758     ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
17759
17760     Signed-off-by: Stefan Roese <sr@denx.de>
17761
17762 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
17763 Author: Wolfgang Denk <wd@denx.de>
17764 Date:   Mon May 12 01:11:21 2008 +0200
17765
17766     Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
17767
17768     This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
17769     which broke many PowerPC boards.
17770
17771 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
17772 Author: Wolfgang Denk <wd@denx.de>
17773 Date:   Mon May 12 00:56:28 2008 +0200
17774
17775     Revert "Avoid initrd and logbuffer area overlaps"
17776
17777     This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
17778     which breaks building on all PPC boards that don't use a log buffer.
17779
17780 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
17781 Author: Nick Spence <nick.spence@freescale.com>
17782 Date:   Sat May 10 14:02:04 2008 -0700
17783
17784     Fix offset calculation for multi-type legacy images.
17785
17786     Calculation of tail was incorrect when size % 4 == 0.
17787
17788     New code removes the conditional and does the same thing but with arithmetic
17789
17790     Signed-off-by: Nick Spence <nick.spence@freescale.com>
17791
17792 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
17793 Author: Wolfgang Denk <wd@denx.de>
17794 Date:   Mon May 12 00:40:58 2008 +0200
17795
17796     Revert "Change env_get_char from a global function ptr to a function."
17797
17798     This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
17799     which is known to break booting from dataflash and NAND.
17800
17801 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
17802 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17803 Date:   Sun May 11 23:13:57 2008 +0200
17804
17805     API: remove duplicate syscall check
17806
17807     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17808
17809 commit 67e3beb52c320b0a31cf030716c99392cde2d532
17810 Author: Stelian Pop <stelian@popies.net>
17811 Date:   Fri May 9 21:46:51 2008 +0200
17812
17813     AT91: Cleanup unused config header file definitions.
17814
17815     CONFIG_ENV_OVERWRITE is commented out in the config header files,
17816     so let's cleanup the files by removing the whole definition.
17817
17818     Signed-off-by: Stelian Pop <stelian@popies.net>
17819     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17820
17821 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
17822 Author: Stelian Pop <stelian@popies.net>
17823 Date:   Thu May 8 14:52:34 2008 +0200
17824
17825     Support AT91CAP9 revC CPUs
17826
17827     The AT91CAP9 revC CPU has a few differences over the previous,
17828     revB CPU which was distributed in small quantities only (revA was
17829     an internal Atmel product only).
17830
17831     The revC silicon needs a special initialisation sequence to
17832     switch from the internal (imprecise) RC oscillator to the
17833     external 32k clock.
17834
17835     Signed-off-by: Stelian Pop <stelian@popies.net>
17836     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17837
17838 commit 098b7b4b441b12c2a64dd517930f43c793542759
17839 Author: Stelian Pop <stelian@popies.net>
17840 Date:   Thu May 8 14:52:33 2008 +0200
17841
17842     Use custom logo for Atmel boards
17843
17844     This patch adds a custom vendor logo for the Atmel AT91 boards.
17845
17846     Signed-off-by: Stelian Pop <stelian@popies.net>
17847     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17848
17849 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
17850 Author: Stelian Pop <stelian@popies.net>
17851 Date:   Thu May 8 14:52:32 2008 +0200
17852
17853     AT91SAM9RLEK: hook up the ATMEL LCD driver
17854
17855     This patch makes the necessary adaptations (PIO configurations and
17856     defines in config header file) to hook up the Atmel LCD driver to the
17857     AT91SAM9RLEK board.
17858
17859     Signed-off-by: Stelian Pop <stelian@popies.net>
17860     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17861
17862 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
17863 Author: Stelian Pop <stelian@popies.net>
17864 Date:   Thu May 8 14:52:31 2008 +0200
17865
17866     AT91SAM9263EK: hook up the ATMEL LCD driver
17867
17868     This patch makes the necessary adaptations (PIO configurations and
17869     defines in config header file) to hook up the Atmel LCD driver to the
17870     AT91SAM9263EK board.
17871
17872     Signed-off-by: Stelian Pop <stelian@popies.net>
17873     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17874
17875 commit 820f2a958325061a446115f3035e48e4726b3390
17876 Author: Stelian Pop <stelian@popies.net>
17877 Date:   Thu May 8 14:52:30 2008 +0200
17878
17879     AT91SAM9261EK: hook up the ATMEL LCD driver
17880
17881     This patch makes the necessary adaptations (PIO configurations and
17882     defines in config header file) to hook up the Atmel LCD driver to the
17883     AT91SAM9261EK board.
17884
17885     Signed-off-by: Stelian Pop <stelian@popies.net>
17886     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17887
17888 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
17889 Author: Stelian Pop <stelian@popies.net>
17890 Date:   Thu May 8 14:52:29 2008 +0200
17891
17892     AT91CAP9ADK: hook up the ATMEL LCD driver
17893
17894     This patch makes the necessary adaptations (PIO configurations and
17895     defines in config header file) to hook up the Atmel LCD driver to the
17896     AT91CAP9ADK board.
17897
17898     Signed-off-by: Stelian Pop <stelian@popies.net>
17899     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17900
17901 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
17902 Author: Stelian Pop <stelian@popies.net>
17903 Date:   Fri May 9 21:57:18 2008 +0200
17904
17905     Add ATMEL LCD driver
17906
17907     This patch adds support for the ATMEL LCDC driver which is used on some
17908     AT91 and AVR platforms.
17909
17910     Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
17911     AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
17912
17913     Signed-off-by: Stelian Pop <stelian@popies.net>
17914     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17915
17916 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
17917 Author: Stelian Pop <stelian@popies.net>
17918 Date:   Thu May 8 18:52:25 2008 +0200
17919
17920     AT91SAM9RLEK support
17921
17922     This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
17923     board.
17924
17925     Signed-off-by: Stelian Pop <stelian@popies.net>
17926     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17927
17928 commit 8e429b3eee23927c1222679f6b6f53667b21595c
17929 Author: Stelian Pop <stelian@popies.net>
17930 Date:   Thu May 8 18:52:23 2008 +0200
17931
17932     AT91SAM9263EK support
17933
17934     This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
17935     board.
17936
17937     Signed-off-by: Stelian Pop <stelian@popies.net>
17938     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17939
17940 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
17941 Author: Stelian Pop <stelian@popies.net>
17942 Date:   Thu May 8 20:52:22 2008 +0200
17943
17944     AT91SAM9261EK support
17945
17946     This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
17947     board.
17948
17949     Signed-off-by: Stelian Pop <stelian@popies.net>
17950     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17951
17952 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
17953 Author: Stelian Pop <stelian@popies.net>
17954 Date:   Thu May 8 20:52:21 2008 +0200
17955
17956     AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
17957
17958     This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
17959     in order to cope with the changes in DataFlash partitionning scheme
17960     (cset c3a60cb3).
17961
17962     Signed-off-by: Stelian Pop <stelian@popies.net>
17963     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17964
17965 commit 96996ac25d5222611a8888968db6e53a6d3726da
17966 Author: Stelian Pop <stelian@popies.net>
17967 Date:   Thu May 8 20:52:20 2008 +0200
17968
17969     AT91SAM9260EK: Normalize BOOTARGS
17970
17971     This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
17972     DataFlash or from NAND), and gives to Linux a fully specified mtdparts
17973     variable.
17974
17975     Signed-off-by: Stelian Pop <stelian@popies.net>
17976     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17977
17978 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
17979 Author: Stelian Pop <stelian@popies.net>
17980 Date:   Thu May 8 20:52:19 2008 +0200
17981
17982     AT91SAM9260EK: Normalize SPI timings
17983
17984     This patch changes the SPI timings to closely match the ones
17985     used by the Linux kernel and the Atmel's own bootstrap project.
17986
17987     Signed-off-by: Stelian Pop <stelian@popies.net>
17988     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17989
17990 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
17991 Author: Stelian Pop <stelian@popies.net>
17992 Date:   Thu May 8 20:52:18 2008 +0200
17993
17994     AT91SAM9260EK: Handle 8 or 16 bit NAND
17995
17996     The Atmel boards can handle 8 or 16 bit NAND memories. This patch
17997     makes the support configurable in the board config header file
17998     (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
17999
18000     Signed-off-by: Stelian Pop <stelian@popies.net>
18001     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18002
18003 commit ab52640fc01624e208424e527af0b7b3a5a65a12
18004 Author: Stelian Pop <stelian@popies.net>
18005 Date:   Thu May 8 20:52:17 2008 +0200
18006
18007     AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
18008
18009     This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
18010     in order to cope with the changes in DataFlash partitionning scheme
18011     (cset c3a60cb3).
18012
18013     Signed-off-by: Stelian Pop <stelian@popies.net>
18014     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18015
18016 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
18017 Author: Stelian Pop <stelian@popies.net>
18018 Date:   Thu May 8 20:52:16 2008 +0200
18019
18020     AT91CAP9ADK: Normalize BOOTARGS
18021
18022     This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
18023     DataFlash or from NAND), and gives to Linux a fully specified mtdparts
18024     variable.
18025
18026     Signed-off-by: Stelian Pop <stelian@popies.net>
18027     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18028
18029 commit 93da48b910511911ce110656e17ed733c8ac4c45
18030 Author: Stelian Pop <stelian@popies.net>
18031 Date:   Thu May 8 20:52:15 2008 +0200
18032
18033     AT91CAP9ADK: Normalize SPI timings
18034
18035     This patch changes the SPI timings to closely match the ones
18036     used by the Linux kernel and the Atmel's own bootstrap project.
18037
18038     Signed-off-by: Stelian Pop <stelian@popies.net>
18039     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18040
18041 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
18042 Author: Stelian Pop <stelian@popies.net>
18043 Date:   Thu May 8 20:52:14 2008 +0200
18044
18045     AT91CAP9ADK: Handle 8 or 16 bit NAND
18046
18047     The Atmel boards can handle 8 or 16 bit NAND memories. This patch
18048     makes the support configurable in the board config header file
18049     (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
18050
18051     Signed-off-by: Stelian Pop <stelian@popies.net>
18052     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18053
18054 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
18055 Author: Stelian Pop <stelian@popies.net>
18056 Date:   Thu May 8 20:52:13 2008 +0200
18057
18058     Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
18059
18060     All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
18061     below avoids the duplication of u-boot.lds by putting the file in the
18062     cpu directory instead of the board one.
18063
18064     Signed-off-by: Stelian Pop <stelian@popies.net>
18065     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18066
18067 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
18068 Author: Stelian Pop <stelian@popies.net>
18069 Date:   Thu May 8 20:52:12 2008 +0200
18070
18071     Add proper copyright notices in Atmel boards Makefiles
18072
18073     The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
18074     copyright notice. This patch adds the missing pieces.
18075
18076     Signed-off-by: Stelian Pop <stelian@popies.net>
18077     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18078
18079 commit e817a042cef6164bf26fee86f90326f2ec9e6745
18080 Author: Stelian Pop <stelian@popies.net>
18081 Date:   Thu May 8 20:52:11 2008 +0200
18082
18083     Add copyright information in Atmel boards partition.c
18084
18085     When Ulf did the dataflash.c cleanup, he didn't add his copyright on
18086     the new created files. This patch fixes the problem.
18087
18088     Signed-off-by: Stelian Pop <stelian@popies.net>
18089     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18090
18091 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
18092 Author: Stelian Pop <stelian@popies.net>
18093 Date:   Thu May 8 20:52:10 2008 +0200
18094
18095     Update origin and copyright information in arch-at91sam9 header files
18096
18097     When doing the AT91CAP9/AT91SAM9 port, a number of header files were
18098     copied from the Linux kernel sources. This patch explicitly specifies
18099     this origin for all the copied headers, and for those missing copyright
18100     information, adds it.
18101
18102     Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
18103     in the latest kernel sources by 'at91sam9_smc.h'.
18104
18105     The copyright information has been confirmed by the AT91 Linux kernel
18106     maintainer, Andrew Victor <avictor.za@gmail.com>.
18107
18108     Signed-off-by: Stelian Pop <stelian@popies.net>
18109     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18110
18111 commit 79dd1712689d6a5031d7cbff54957049680751c7
18112 Author: Markus Klotzbücher <mk@denx.de>
18113 Date:   Thu May 8 16:00:55 2008 +0200
18114
18115     ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
18116
18117     When using dhcp/bootp the "netmask" environment variable is not set
18118     because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
18119     desireable, so the following patch adds this this option to the board
18120     config.
18121
18122     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
18123     Signed-off-by: Stefan Roese <sr@denx.de>
18124
18125 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
18126 Author: Stefan Roese <sr@denx.de>
18127 Date:   Sat May 10 10:30:36 2008 +0200
18128
18129     ppc4xx: Update Makalu defconfig to use device-tree booting as default
18130
18131     This patch reworks the default environment on Makalu. Now "net_nfs" for
18132     example uses the device-tree style booting formerly know as "net_nfs_fdt".
18133     Also the addresses in RAM were changed because of the new image booting
18134     support, which check for image overwriting. So the addresses needed to
18135     get adjusted.
18136
18137     Signed-off-by: Stefan Roese <sr@denx.de>
18138
18139 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
18140 Author: Becky Bruce <bgill@freescale.com>
18141 Date:   Wed May 7 13:28:16 2008 -0500
18142
18143     PPC: fix map_physmem build warning
18144
18145     map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
18146     enabled.  This quiets the warning.
18147
18148     Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
18149
18150 commit 36f32675f40292002ee1fed252c180a43022d2d4
18151 Author: Becky Bruce <bgill@freescale.com>
18152 Date:   Wed May 7 13:24:57 2008 -0500
18153
18154     Update pci code to use phys_addr_t
18155
18156     Physical addrs need to be represented by phys_addr_t, not
18157     unsigned long.  Otherwise, systems that use CONFIG_PHYS_64BIT
18158     are going to fail mightily.
18159
18160     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
18161
18162 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
18163 Author: Nick Spence <nick.spence@freescale.com>
18164 Date:   Thu May 8 22:32:22 2008 -0700
18165
18166     Support legacy multi-type images without FDT section.
18167
18168     This patch enables legacy multi-type images containing only a Linux kernel
18169     and root file system to be loaded, maintaining compatibility with previous
18170     versions of u-boot.
18171
18172     This is required when using old image files such as a Linux 2.4 kernel /
18173     filesystem.
18174
18175     Signed-off-by: Nick Spence <nick.spence@freescale.com>
18176     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
18177
18178 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
18179 Author: Wolfgang Denk <wd@denx.de>
18180 Date:   Sat May 10 00:38:02 2008 +0200
18181
18182     Update CHANGELOG.
18183
18184     Signed-off-by: Wolfgang Denk <wd@denx.de>
18185
18186 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
18187 Author: Wolfgang Denk <wd@denx.de>
18188 Date:   Sat May 10 00:36:09 2008 +0200
18189
18190     post/cpu/ppc4xx/Makefile: line length cleanup
18191
18192     Signed-off-by: Wolfgang Denk <wd@denx.de>
18193
18194 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
18195 Author: Stelian Pop <stelian@popies.net>
18196 Date:   Thu May 8 22:52:09 2008 +0200
18197
18198     Fix @ -> <at> substitution
18199
18200     When applying the AT91CAP9 patches upstream, something transformed
18201     the '@' character into the ' <at> ' sequence.
18202
18203     The patch below restores the original form in all the places where
18204     it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
18205     were copied from AT91CAP9, and a couple of other files where the
18206     ' <at> ' sequence was present).
18207
18208     Signed-off-by: Stelian Pop <stelian@popies.net>
18209
18210 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
18211 Author: Stelian Pop <stelian@popies.net>
18212 Date:   Thu May 8 22:52:10 2008 +0200
18213
18214     Update origin and copyright information in arch-at91sam9 header files
18215
18216     When doing the AT91CAP9/AT91SAM9 port, a number of header files were
18217     copied from the Linux kernel sources. This patch explicitly specifies
18218     this origin for all the copied headers, and for those missing copyright
18219     information, adds it.
18220
18221     Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
18222     in the latest kernel sources by 'at91sam9_smc.h'.
18223
18224     The copyright information has been confirmed by the AT91 Linux kernel
18225     maintainer, Andrew Victor <avictor.za@gmail.com>.
18226
18227     Signed-off-by: Stelian Pop <stelian@popies.net>
18228
18229 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
18230 Author: Stelian Pop <stelian@popies.net>
18231 Date:   Thu May 8 22:52:11 2008 +0200
18232
18233     Add copyright information in Atmel boards partition.c
18234
18235     When Ulf did the dataflash.c cleanup, he didn't add his copyright on
18236     the new created files. This patch fixes the problem.
18237
18238     Signed-off-by: Stelian Pop <stelian@popies.net>
18239
18240 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
18241 Author: Guennadi Liakhovetski <lg@denx.de>
18242 Date:   Thu May 8 10:09:27 2008 +0200
18243
18244     mx31ads: fix 32kHz clock handling
18245
18246     According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
18247     oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
18248     Also fix a typo when verifying a jumper configuration. While at it, make
18249     two needlessly global functions static.
18250
18251     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
18252
18253 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
18254 Author: Marian Balakowicz <m8@semihalf.com>
18255 Date:   Wed May 7 13:10:04 2008 +0200
18256
18257     Avoid initrd and logbuffer area overlaps
18258
18259     Add logbuffer to reserved LMB areas to prevent initrd allocation
18260     from overlaping with it.
18261
18262     Make sure to use correct logbuffer base address.
18263
18264     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
18265
18266 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
18267 Author: Marian Balakowicz <m8@semihalf.com>
18268 Date:   Wed May 7 13:08:54 2008 +0200
18269
18270     ppc: Cleanup get_effective_memsize() use
18271
18272     Removed duplicated effective memory size calculation code.
18273
18274     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
18275
18276 commit 273c37d843d5b581090378016cd12dd9c586907b
18277 Author: Marian Balakowicz <m8@semihalf.com>
18278 Date:   Wed May 7 09:03:53 2008 +0200
18279
18280     Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
18281
18282     Recent modifcations to LOGBUFFER handling code were incorrecly
18283     introduced to fit_check_kernel() routine during
18284     "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
18285     commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
18286
18287     This patch cleans up this merge issue.
18288
18289     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
18290
18291 commit bc11756daff89a3de09ca80adac962b88cf06e6e
18292 Author: Grant Erickson <gerickson@nuovations.com>
18293 Date:   Tue May 6 20:16:15 2008 -0700
18294
18295     Propagate Error Status to the Shell on fw_printenv Errors
18296
18297     Changed implementation such that fw_printenv returns failure status
18298     when one or more specified variables do not exist or when incorrect
18299     command syntax is used.
18300
18301     This aids scripting fw_printenv such that the script can key of the
18302     return status rather than relying on standard error "scraping".
18303
18304     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
18305     Signed-off-by: Wolfgang Denk <wd@denx.de>
18306
18307 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
18308 Author: Grant Erickson <gerickson@nuovations.com>
18309 Date:   Tue May 6 16:18:00 2008 -0700
18310
18311     Fix Compilation Errors with 'tools/env/fw_printenv'
18312
18313     In the current top-of-tree, 1.3.3.-rc2, the optional tool
18314     'tools/env/fw_printenv' fails to compile for two reasons:
18315
18316     1) The header watchdog.h cannot be found.
18317     2) The header zlib.h is picked up from the tool chain rather than the
18318        project causing a prototype conflict for crc32.
18319
18320     This patch addresses both of these issues.
18321
18322     Platforms Tested On:
18323     - AMCC "Kilauea"
18324
18325     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
18326
18327 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
18328 Author: James Yang <James.Yang@freescale.com>
18329 Date:   Mon May 5 10:22:53 2008 -0500
18330
18331     Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
18332
18333     When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
18334     work before relocating to RAM because command history is written into
18335     a global array that is not writable before relocation.  This patch
18336     defers to the no-editing and no-history code in readline_into_buffer()
18337     if it is called before relocation.
18338
18339     Signed-off-by: James Yang <James.Yang@freescale.com>
18340     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18341
18342 commit 726c0f1e5f108dccea052965123b95837d2bd402
18343 Author: Detlev Zundel <dzu@denx.de>
18344 Date:   Mon May 5 16:11:22 2008 +0200
18345
18346     cosmetic: Adjust coding style for switch statements to be consistent
18347
18348     Signed-off-by: Detlev Zundel <dzu@denx.de>
18349
18350 commit 574b319512b13e10800f0045e39b993f4ca25e42
18351 Author: Detlev Zundel <dzu@denx.de>
18352 Date:   Mon May 5 16:11:21 2008 +0200
18353
18354     Fix disk type output in disk/part.c
18355
18356     Signed-off-by: Detlev Zundel <dzu@denx.de>
18357
18358 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
18359 Author: Vlad Lungu <vlad.lungu@windriver.com>
18360 Date:   Mon May 5 14:20:03 2008 +0300
18361
18362     Mail address change, documentation modified
18363
18364     Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
18365
18366 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
18367 Author: Michal Simek <monstr@monstr.eu>
18368 Date:   Sun May 4 15:42:41 2008 +0200
18369
18370     microblaze: Repare intc handling
18371
18372     Signed-off-by: Michal Simek <monstr@monstr.eu>
18373
18374 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
18375 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18376 Date:   Sun May 4 15:17:52 2008 +0200
18377
18378     include/gitignore: update to all architectures
18379
18380     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18381
18382 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
18383 Author: Marcel Ziswiler <marcel@ziswiler.com>
18384 Date:   Mon May 5 02:12:06 2008 +0200
18385
18386     ide: Remove spurious second include of io.h
18387
18388     Removed the second include, with all the #ifdef around as suggested by Wolfgang.
18389
18390     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
18391
18392 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
18393 Author: Adrian Filipi <adrian.filipi@eurotech.com>
18394 Date:   Tue May 6 16:46:37 2008 -0400
18395
18396     Fix some typos
18397
18398     This patch fixes three typos.
18399     The first is a repetition of CONFIG_CMD_BSP.
18400     The second makes the #endif comment match its #if.
18401     The third is a spelling error.
18402
18403     Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
18404
18405 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
18406 Author: Grant Erickson <gerickson@nuovations.com>
18407 Date:   Sun May 4 16:45:01 2008 -0700
18408
18409     Recognize 'powerpc' As an Alias for IH_ARCH_PPC
18410
18411     Add support for the recognition of 'powerpc' as an alias for the PowerPC
18412     architecture type since Linux is already trending in that direction,
18413     preferring 'powerpc' to 'ppc'.
18414
18415     Signed-off-by: Grant Erickson <gerickson@nuovations.com>
18416
18417 commit f5a24259190c388c2527bdc49fee34577d862cc7
18418 Author: Wheatley Travis <Travis.Wheatley@freescale.com>
18419 Date:   Fri May 2 13:35:15 2008 -0700
18420
18421     7450 and 86xx L2 cache invalidate bug corrections
18422
18423     The 7610 and related parts have an L2IP bit in the L2CR that is
18424     monitored to signal when the L2 cache invalidate is complete whereas the
18425     7450 and related parts utilize L2I for this purpose. However, the
18426     current code does not account for this difference. Additionally the 86xx
18427     L2 cache invalidate code used an "andi" instruction where an "andis"
18428     instruction should have been used.
18429
18430     This patch addresses both of these bugs.
18431
18432     Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
18433     Acked-By: Jon Loeliger <jdl@freescale.com>
18434
18435 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
18436 Author: Wolfgang Denk <wd@denx.de>
18437 Date:   Fri May 9 10:16:13 2008 +0200
18438
18439     Avoid infinite loop "Generating include/autoconf.mk"
18440
18441     Fix a bogus circular dependency that caused an infinite loop of
18442     "Generating include/autoconf.mk" again and again.
18443
18444     Signed-off-by: Wolfgang Denk <wd@denx.de>
18445
18446 commit 567fb852178dbf59529d7301620a3f3732a4b02d
18447 Author: Stelian Pop <stelian@popies.net>
18448 Date:   Thu May 8 22:52:09 2008 +0200
18449
18450     Fix @ -> <at> substitution
18451
18452     When applying the AT91CAP9 patches upstream, something transformed
18453     the '@' character into the ' <at> ' sequence.
18454
18455     The patch below restores the original form in all the places where
18456     it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
18457     were copied from AT91CAP9, and a couple of other files where the
18458     ' <at> ' sequence was present).
18459
18460     Signed-off-by: Stelian Pop <stelian@popies.net>
18461     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18462
18463 commit 73ccb3410a0785593cda7aee455dfc51f790e281
18464 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
18465 Date:   Mon Apr 28 14:04:32 2008 +0200
18466
18467     ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
18468
18469     Signed-off-by: Gary Jennejohn <garyj@denx.de>
18470     Signed-off-by: Stefan Roese <sr@denx.de>
18471
18472 commit ef2642625cbfb1c3695e3478d08ae515052a4950
18473 Author: Stefan Roese <sr@denx.de>
18474 Date:   Thu May 8 11:10:46 2008 +0200
18475
18476     ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
18477
18478     Signed-off-by: Stefan Roese <sr@denx.de>
18479
18480 commit a00eccfebc954ad9485161efeca7d9aaf626d530
18481 Author: Stefan Roese <sr@denx.de>
18482 Date:   Thu May 8 11:05:15 2008 +0200
18483
18484     ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
18485
18486     This patch adds fdt (flattened device tree) support to all remaining AMCC
18487     eval boards. Most newer boards already support device tree. With this patch,
18488     all AMCC boards now enable device tree passing from U-Boot to Linux
18489     arch/powerpc kernels.
18490
18491     Signed-off-by: Stefan Roese <sr@denx.de>
18492
18493 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
18494 Author: Stefan Roese <sr@denx.de>
18495 Date:   Thu May 8 11:01:09 2008 +0200
18496
18497     ppc4xx: Add weak default ft_board_setup() routine
18498
18499     This patch adds a default ft_board_setup() routine to the 4xx fdt code.
18500     This routine is defined as weak and can be overwritten by a board specific
18501     one if needed.
18502
18503     Signed-off-by: Stefan Roese <sr@denx.de>
18504
18505 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
18506 Author: Stefan Roese <sr@denx.de>
18507 Date:   Thu May 8 10:48:58 2008 +0200
18508
18509     ppc4xx: acadia: Add fdt support and fix section overlap problem
18510
18511     This patch adds fdt (flattened device tree) support to the AMCC
18512     Acadia eval board. This increases the image size and it doesn't
18513     fit anymore into 256kByte. Since we didn't want to remove features
18514     from the configuration, we decided to increase the U-Boot image size
18515     (add one flash sector).
18516
18517     Also changed the default environment definition to make it
18518     independent of such changes.
18519
18520     Signed-off-by: Stefan Roese <sr@denx.de>
18521
18522 commit 4adb3023de75bc150f088c8935db340930ad38c8
18523 Author: Ira Snyder <iws@ovro.caltech.edu>
18524 Date:   Tue Apr 29 11:18:54 2008 -0700
18525
18526     ppc4xx: Add device tree support to AMCC Yosemite
18527
18528     Add support for booting with a device tree blob. This is needed to boot
18529     ARCH=powerpc kernels. Also add support for setting the eth0 mac address
18530     via the ethaddr variable.
18531
18532     Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
18533     Signed-off-by: Stefan Roese <sr@denx.de>
18534
18535 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
18536 Author: Dave Mitchell <dmitchell@amcc.com>
18537 Date:   Wed May 7 09:00:23 2008 -0700
18538
18539     ppc4xx: Fix typos in 460GT/EX FBDV array
18540
18541     Corrected two typos in the 460GT/EX FBDV array.
18542
18543     Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
18544     Signed-off-by: Stefan Roese <sr@denx.de>
18545
18546 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
18547 Author: Andy Fleming <afleming@freescale.com>
18548 Date:   Wed May 7 16:54:31 2008 -0500
18549
18550     85xx: Limit CPU2 workaround to parts that have the errata
18551
18552     Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
18553     Signed-off-by: Andy Fleming <afleming@freescale.com>
18554
18555 commit a5fe514e8ace564300d2c1d73846ddff49654243
18556 Author: Lee Nipper <lee.nipper@freescale.com>
18557 Date:   Fri Apr 25 15:44:45 2008 -0500
18558
18559     mpc83xx: system performance settings for MPC8349EMDS.
18560
18561     These same settings are used on MPC8349ITX, and
18562     improve performance on MPC8349EMDS.
18563
18564     Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
18565     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18566
18567 commit 49387dba910e485640b575e920ee463b7e611dc3
18568 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18569 Date:   Tue May 6 13:22:52 2008 +0900
18570
18571     [MIPS] cpu/mips/cache.S: Fix build warning
18572
18573     Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
18574     warns illegal global symbol references by bal (and jal also) instruction.
18575     This does not happen with the latest binutils v2.18.
18576
18577     Here's an example on gth2_config:
18578
18579     mips_4KC-gcc  -D__ASSEMBLY__ -g  -Os   -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
18580     stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
18581     c -EB -c -o cache.o cache.S
18582     cache.S: Assembler messages:
18583     cache.S:243: Warning: Pretending global symbol used as branch target is local.
18584     cache.S:250: Warning: Pretending global symbol used as branch target is local.
18585
18586     In principle, gas might be sensitive to global symbol references in PIC
18587     code because they should be processed through GOT (global offset table).
18588     But if `bal' instruction is used, it results in PC-based offset jump.
18589     This is the cause of this warning.
18590
18591     In practice, we know it doesn't matter whether PC-based reference or GOT-
18592     based. As for this case, both will work before/after relocation. But let's
18593     fix the code.
18594
18595     This patch explicitly sets up a target address, then jump there.
18596     Here's an example of disassembled code with/without this patch.
18597
18598      90000668:       1485ffef        bne     a0,a1,90000628 <mips_cache_reset+0x20>
18599      9000066c:       ac80fffc        sw      zero,-4(a0)
18600      90000670:       01402821        move    a1,t2
18601     -90000674:       0411ffba        bal     90000560 <mips_init_icache>
18602     -90000678:       01803021        move    a2,t4
18603     -9000067c:       01602821        move    a1,t3
18604     -90000680:       0411ffcc        bal     900005b4 <mips_init_dcache>
18605     -90000684:       01a03021        move    a2,t5
18606     -90000688:       03000008        jr      t8
18607     -9000068c:       00000000        nop
18608     +90000674:       01803021        move    a2,t4
18609     +90000678:       8f8f83ec        lw      t7,-31764(gp)
18610     +9000067c:       01e0f809        jalr    t7
18611     +90000680:       00000000        nop
18612     +90000684:       01602821        move    a1,t3
18613     +90000688:       01a03021        move    a2,t5
18614     +9000068c:       8f8f81e0        lw      t7,-32288(gp)
18615     +90000690:       01e0f809        jalr    t7
18616     +90000694:       00000000        nop
18617     +90000698:       03000008        jr      t8
18618     +9000069c:       00000000        nop
18619
18620     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18621
18622 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
18623 Author: Vlad Lungu <vlad.lungu@windriver.com>
18624 Date:   Mon May 5 14:04:00 2008 +0300
18625
18626     Allow building mips versions with ELDK 3.1.1
18627
18628     .gpword works only with local symbols on certain binutils versions
18629
18630     Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
18631
18632 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
18633 Author: Wolfgang Denk <wd@denx.de>
18634 Date:   Mon May 5 12:52:36 2008 +0200
18635
18636     MAKEALL: add inka4x0 board
18637
18638     Signed-off-by: Wolfgang Denk <wd@denx.de>
18639
18640 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
18641 Author: Wolfgang Denk <wd@denx.de>
18642 Date:   Sun May 4 21:34:23 2008 +0200
18643
18644     kb9202 board: fix build problem.
18645
18646     Signed-off-by: Wolfgang Denk <wd@denx.de>
18647
18648 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
18649 Author: Wolfgang Denk <wd@denx.de>
18650 Date:   Sun May 4 12:10:33 2008 +0200
18651
18652     Prepare for v1.3.3-rc3
18653
18654     Update ChNAGELOG, minor white space cleanup.
18655
18656     Signed-off-by: Wolfgang Denk <wd@denx.de>
18657
18658 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
18659 Author: Wolfgang Denk <wd@denx.de>
18660 Date:   Sun May 4 00:35:15 2008 +0200
18661
18662     drivers/net/tsec.c: Fix typo.
18663
18664     Signed-off-by: Wolfgang Denk <wd@denx.de>
18665
18666 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
18667 Author: Mike Frysinger <vapier@gentoo.org>
18668 Date:   Fri May 2 21:45:12 2008 -0400
18669
18670     version_autogenerated.h: use printf rather than echo -n
18671
18672     Some systems are dumb and do not implement the -n flag to echo (like OS X).
18673     Convert the Makefile to use printf as this should work everywhere.
18674
18675     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18676     Signed-off-by: Wolfgang Denk <wd@denx.de>
18677
18678 commit 4acc2a108ad0a669165924704a6cb083f9138242
18679 Author: Mike Frysinger <vapier@gentoo.org>
18680 Date:   Fri May 2 18:17:50 2008 -0400
18681
18682     fix building when saveenv is disabled in some setups
18683
18684     If you enable environment in the flash, but disable the embedded
18685     option, and you disable the saveenv command, then the #if nested
18686     logic will trigger a compile failure:
18687     env_flash.c: In function 'env_relocate_spec':
18688     env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
18689     The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
18690
18691     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18692
18693 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
18694 Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
18695 Date:   Fri May 2 16:10:04 2008 -0400
18696
18697     SBC8548: fix address mask to allow 64M flash
18698
18699     Fix incorrect mask to enable all 64MB of onboard flash.
18700     Previously U-Boot incorrectly mapped only 8MB of flash, this
18701     patch correctly maps all the available flash.
18702
18703     Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
18704
18705 commit 3648085c464c8c22ef76fab006ca4344d3796124
18706 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18707 Date:   Fri May 2 19:48:56 2008 +0200
18708
18709     qemu_mips: add README
18710
18711     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18712
18713 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
18714 Author: Marcel Ziswiler <marcel@ziswiler.com>
18715 Date:   Fri May 2 02:35:59 2008 +0200
18716
18717     Fix misspelled comment
18718
18719     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
18720
18721 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
18722 Author: Mike Frysinger <vapier@gentoo.org>
18723 Date:   Thu May 1 04:13:05 2008 -0400
18724
18725     mkimage: make mmap() checks consistent
18726
18727     The mmap() related code is full of inconsistent casts/constants when
18728     it comes to error checking, and may break when building on some
18729     systems (like ones that do not implicitly define the caddr_t type).
18730     Let's just avoid the whole mess by writing the code nice and clean in
18731     the first place.
18732
18733     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18734
18735 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
18736 Author: Marcel Ziswiler <marcel@ziswiler.com>
18737 Date:   Thu May 1 09:05:34 2008 +0200
18738
18739     Fix defined but not used build warning
18740
18741     - warning: 'srom' defined but not used
18742
18743     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
18744
18745 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
18746 Author: Marcel Ziswiler <marcel@ziswiler.com>
18747 Date:   Thu May 1 09:05:26 2008 +0200
18748
18749     Fix implicit declaration build warnings
18750
18751     - warning: implicit declaration of function ‘serial_initialize’
18752
18753     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
18754
18755 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
18756 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
18757 Date:   Tue Apr 29 19:18:32 2008 +0200
18758
18759     TSEC: add config options for VSC8601 RGMII PHY
18760
18761     The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
18762     and Tx clock lines. They are configured using 2 bits in extended
18763     register 0x17.
18764     Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
18765     been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
18766
18767     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
18768     Acked-by: Andy Fleming <afleming@freescale.com>
18769     Acked-by: Ben Warren <biggerbadderben@gmail.com>
18770     --
18771
18772      drivers/net/tsec.c |    6 ++++++
18773      drivers/net/tsec.h |    3 +++
18774      2 files changed, 9 insertions(+), 0 deletions(-)
18775
18776 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
18777 Author: Wolfgang Denk <wd@denx.de>
18778 Date:   Sat May 3 23:07:15 2008 +0200
18779
18780     Revert "ColdFire: Get information from the correct GCC"
18781
18782     This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
18783     (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
18784
18785 commit c4e5f52a58d278eebb87f476e353972c5dacea40
18786 Author: Wolfgang Denk <wd@denx.de>
18787 Date:   Sat May 3 22:25:00 2008 +0200
18788
18789     config.mk: use correct (cross) compiler
18790
18791     Some config.mk files reference $(CC) to test for specific tool chain
18792     features, so make sure $(CC) gets set before including any such
18793     config files.
18794
18795     This patch replaces commit b7166e05a5 ("ColdFire: Get information from
18796     the correct GCC").
18797
18798     Signed-off-by: Wolfgang Denk <wd@denx.de>
18799
18800 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
18801 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18802 Date:   Thu May 1 02:13:44 2008 +0200
18803
18804     pxa: fix previous definition on cpu init
18805
18806     start.S:183:1: warning: "ICMR" redefined
18807     In file included from start.S:33:
18808     include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
18809     start.S:187:1: warning: "RCSR" redefined
18810     ...
18811
18812     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18813
18814 commit 6d12e697de794d700767f22f950e3026ccf4daf6
18815 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18816 Date:   Thu May 1 02:13:43 2008 +0200
18817
18818     pxa: fix pcmcia operation on 'i' may be undefined
18819
18820     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18821     Signed-off-by: Wolfgang Denk <wd@denx.de>
18822
18823 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
18824 Author: Kumar Gala <galak@kernel.crashing.org>
18825 Date:   Wed Apr 30 16:24:35 2008 -0500
18826
18827     MPC8610HPCD: Drop -O2 from the build flags
18828
18829     Make the flags use -Os like all other boards
18830
18831     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18832
18833 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
18834 Author: Stefan Roese <sr@denx.de>
18835 Date:   Wed Apr 30 15:50:39 2008 +0200
18836
18837     RTC: Fix month offset by one problem in M41T62 RTC driver
18838
18839     This patch fixes a problem with the month being read and written
18840     incorrectly (offset by one). This only gets visible by also using
18841     the Linux driver (rtc-m41t80).
18842
18843     Tested on AMCC Canyonlands.
18844
18845     Signed-off-by: Stefan Roese <sr@denx.de>
18846
18847 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
18848 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18849 Date:   Sat May 3 13:51:44 2008 +0900
18850
18851     [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
18852
18853     Current trick to pick up GNU assembler minor version uses a dot(.) as a
18854     delimiter, and take the second field to obtain minor version number. But
18855     as can be expected, this doesn't work with a version string which has
18856     dots more than needs.
18857
18858     Here's an example:
18859
18860     $ mips-linux-gnu-as --version | grep 'GNU assembler'
18861     GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
18862     $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
18863     2-129) 2
18864     $
18865
18866     This patch restricts the version format to 2.XX.XX... This will work
18867     in most cases.
18868
18869     $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
18870     2.18.50.20080215
18871     $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
18872     18
18873     $
18874
18875     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18876
18877 commit ea638951acead7f1086c908c0b9f086beab82a22
18878 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18879 Date:   Sat May 3 13:51:28 2008 +0900
18880
18881     [MIPS] cpu/mips/cache.S: Add dcache_enable
18882
18883     Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
18884     "allow ports to override bootelf behavior") requires ports to have this
18885     function.
18886
18887     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18888     Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18889
18890 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
18891 Author: Wolfgang Denk <wd@denx.de>
18892 Date:   Thu May 1 21:30:16 2008 +0200
18893
18894     onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
18895
18896     Onenand needs a version of memcpy() which performs 16 bit accesses
18897     only; make sure the name does not conflict with the standard
18898     function.
18899
18900     Signed-off-by: Wolfgang Denk <wd@denx.de>
18901
18902 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
18903 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18904 Date:   Wed Apr 30 22:38:17 2008 +0200
18905
18906     cmd_nand: fix warning: str2long ncompatible pointer type
18907
18908     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18909
18910 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
18911 Author: Timur Tabi <timur@freescale.com>
18912 Date:   Fri Apr 4 11:16:11 2008 -0500
18913
18914     Fix calculation of I2C clock for some 86xx chips
18915
18916     Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
18917     There is no pattern that can be used to determine which chips use which
18918     frequency, so the only way to determine is to look up the actual SOC
18919     designation and use the right value for that SOC.
18920
18921     Signed-off-by: Timur Tabi <timur@freescale.com>
18922
18923 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
18924 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18925 Date:   Wed Apr 30 12:11:19 2008 -0500
18926
18927     ColdFire: Fix ethernet hang issue for mcf547x_8x
18928
18929     The ethernet hang is caused by receiving buffer in DRAM is not
18930     yet ready due to access cycles require longer time in DRAM.
18931     Relocate DMA buffer descriptors from DRAM to internal SRAM.
18932
18933     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18934
18935 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
18936 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18937 Date:   Wed Apr 30 12:10:47 2008 -0500
18938
18939     ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
18940
18941     Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
18942     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18943
18944 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
18945 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18946 Date:   Wed Apr 30 12:10:23 2008 -0500
18947
18948     ColdFire: Get information from the correct GCC
18949
18950     Signed-off-by: Kurt Mahan <kmahan@freescale.com>
18951     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
18952
18953 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
18954 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
18955 Date:   Wed Apr 30 18:02:59 2008 +0200
18956
18957     Fix warning in env_nand.c if compiled for DaVinci Schmoogie
18958
18959     Fix warnings
18960
18961     nv_nand.c: In function 'saveenv':
18962     env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
18963     env_nand.c: In function 'env_relocate_spec':
18964     env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
18965
18966     if compiled for davinci_schmoogie_config.
18967
18968     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
18969     Ack by: Sergey Kubushyn <ksi@koi8.net>
18970
18971 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
18972 Author: Anatolij Gustschin <agust@denx.de>
18973 Date:   Wed Apr 30 13:34:40 2008 +0200
18974
18975     Fix warnings while compiling net/net.c for MPC8610HPCD board
18976
18977     MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
18978     causing overriding default -Os option. New gcc (ver. 4.2.2)
18979     produces warnings while compiling net/net.c file with -O2
18980     option. The patch is an attempt to fix this.
18981
18982     Signed-off-by: Anatolij Gustschin <agust@denx.de>
18983
18984 commit 58b575e575c25fdf8c88141e145db201f3092149
18985 Author: Sascha Laue <Sascha.Laue@gmx.biz>
18986 Date:   Wed Apr 30 15:23:38 2008 +0200
18987
18988     lwmon5: fix offset error in sysmon0 POST
18989
18990     Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
18991     Signed-off-by: Wolfgang Denk <wd@denx.de>
18992
18993 commit e7419b243a373de4ee042f7d4f45f66de787240d
18994 Author: Sascha Laue <Sascha.Laue@gmx.biz>
18995 Date:   Wed Apr 30 15:16:35 2008 +0200
18996
18997     lwmon5: fix manual merge error in POST
18998
18999     Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
19000
19001 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
19002 Author: Wolfgang Denk <wd@denx.de>
19003 Date:   Wed Apr 30 17:46:26 2008 +0200
19004
19005     cmd_nand.c: fix another 'incompatible pointer type' warning.
19006
19007     Signed-off-by: Wolfgang Denk <wd@denx.de>
19008
19009 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
19010 Author: Wolfgang Denk <wd@denx.de>
19011 Date:   Wed Apr 30 17:25:07 2008 +0200
19012
19013     Makefile: fix parallel builds
19014
19015     This problem shows up with parallel builds only; it results in
19016     somewhat cryptic error messages like
19017
19018         $ JOBS=-j6 MAKEALL netstar
19019         Configuring for netstar board...
19020         arm-linux-ld: cannot find -lgeneric
19021         make[1]: *** [eeprom.srec] Error 1
19022
19023     A few boards (like netstar and voiceblue) need some libraries for
19024     building; however, the board Makefile does not contain any such
19025     dependencies which may cause problems with parallel builds. Adding
19026     such dependencies is difficult as we would also have to provide build
19027     rules, which already exist in the respective library Makefiles.
19028
19029     To solve this, we make sure that all libraries get built before the
19030     board code.
19031
19032     Signed-off-by: Wolfgang Denk <wd@denx.de>
19033
19034 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
19035 Author: Stefan Roese <sr@denx.de>
19036 Date:   Wed Apr 30 14:51:36 2008 +0200
19037
19038     ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
19039
19040     This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
19041     used for NAND booting to match the values needed for the new 512MB
19042     DIMM modules shipped with the productions boards:
19043
19044     Crucial: CT6464AC667.8FB
19045
19046     Signed-off-by: Stefan Roese <sr@denx.de>
19047
19048 commit ea9202a659dc75996facf1475f1866a19a9d3129
19049 Author: Stefan Roese <sr@denx.de>
19050 Date:   Wed Apr 30 10:49:43 2008 +0200
19051
19052     ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
19053
19054     This patch fixes a problem with DIMMs that have 8 banks. Now the
19055     MCIF0_MBxCF register will be setup correctly for this setup too.
19056
19057     This was noticed with the 512MB DIMM on Canyonlands/Glacier.
19058
19059     Signed-off-by: Stefan Roese <sr@denx.de>
19060
19061 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
19062 Author: Wolfgang Denk <wd@denx.de>
19063 Date:   Tue Apr 29 23:41:06 2008 +0200
19064
19065     Prepare v1.3.3-rc2, again.
19066
19067     Signed-off-by: Wolfgang Denk <wd@denx.de>
19068
19069 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
19070 Author: Wolfgang Denk <wd@denx.de>
19071 Date:   Tue Apr 29 23:35:24 2008 +0200
19072
19073     Prepare v1.3.3-rc2
19074
19075     Signed-off-by: Wolfgang Denk <wd@denx.de>
19076
19077 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
19078 Author: Wolfgang Denk <wd@denx.de>
19079 Date:   Tue Apr 29 23:32:20 2008 +0200
19080
19081     common/env_nand.c: fix one more incompatible pointer type issue
19082
19083     Signed-off-by: Wolfgang Denk <wd@denx.de>
19084
19085 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
19086 Author: Wolfgang Denk <wd@denx.de>
19087 Date:   Tue Apr 29 21:33:08 2008 +0200
19088
19089     post/board/lwmon5/sysmon.c: fix manual merge error.
19090
19091     Signed-off-by: Wolfgang Denk <wd@denx.de>
19092
19093 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
19094 Author: Kumar Gala <galak@kernel.crashing.org>
19095 Date:   Tue Apr 29 12:54:59 2008 -0500
19096
19097     85xx: Add -mno-spe to e500/85xx builds
19098
19099     Newer gcc's might be configured to enable autovectorization by default.
19100     If we happen to build with one of those compilers we will get SPE
19101     instructions in random code.
19102
19103     -mno-spe disables the compiler for automatically generating SPE
19104     instructions without our knowledge.
19105
19106     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19107
19108 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
19109 Author: Kumar Gala <galak@kernel.crashing.org>
19110 Date:   Tue Apr 29 10:18:34 2008 -0500
19111
19112     Update .gitignore for zlib.h
19113
19114     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19115
19116 commit 45239cf4152109caa925145ccd433529902df887
19117 Author: Kumar Gala <galak@kernel.crashing.org>
19118 Date:   Tue Apr 29 10:27:08 2008 -0500
19119
19120     85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
19121
19122     All the 85xx and 86xx UM describe the register as timing_cfg_3
19123     not as ext_refrec.
19124
19125     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19126
19127 commit ef7d30b14394e4c4a153118f5845760cadada02a
19128 Author: Kumar Gala <galak@kernel.crashing.org>
19129 Date:   Tue Apr 29 10:28:34 2008 -0500
19130
19131     85xx/86xx: Rename DDR init address and init extended address register
19132
19133     Rename init_addr and init_ext_addr to match the docs between
19134     85xx and 86xx.  Both now use 'init_addr' and 'init_ext_addr'.
19135
19136     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19137
19138 commit cf6cc014270549684873a5972d2595052c468cb6
19139 Author: Kumar Gala <galak@kernel.crashing.org>
19140 Date:   Mon Apr 28 02:24:04 2008 -0500
19141
19142     85xx: Additional fixes and cleanup of MP code
19143
19144     * adjust __spin_table alignment to match ePAPR v0.94 spec
19145     * loop over all cpus when determing who is up.  This fixes an issue if
19146       the "boot cpu" isn't core0.  The "boot cpu" will already be in the
19147       cpu_up_mask so there is no harm
19148     * Added some protection in the code to ensure proper behavior.  These
19149       changes are explicitly needed but don't hurt:
19150       - Added eieio to ensure the "hot word" of the table is written after
19151         all other table updates have occurred.
19152       - Added isync to ensure we don't prefetch loading of table entries
19153         until we a released
19154
19155     These issues we raised by Dave Liu.
19156
19157     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19158
19159 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
19160 Author: Yuri Tikhonov <yur@emcraft.com>
19161 Date:   Tue Apr 29 15:06:41 2008 +0200
19162
19163     lwmon5: minor clean-up to include/configs/lwmon5.h
19164
19165     LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
19166     the CFG_DSPIC_TEST_ADDR definition more readable.
19167
19168     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19169
19170 commit f4c4d21a885ccc222fd0acdf653b683249e85117
19171 Author: Stefan Roese <sr@denx.de>
19172 Date:   Tue Apr 29 16:08:05 2008 +0200
19173
19174     ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
19175
19176     Signed-off-by: Stefan Roese <sr@denx.de>
19177
19178 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
19179 Author: Yuri Tikhonov <yur@emcraft.com>
19180 Date:   Tue Apr 29 13:32:45 2008 +0200
19181
19182     ppc flush_cache: add watch-dog triggering into the loops.
19183
19184     Some boards (e.g. lwmon5) need rather a frequent watch-dog
19185     kicking. Since the time it takes for the flush_cache() function
19186     to complete its job depends on the size of data being flushed, one
19187     may encounter watch-dog resets on such boards when, for example,
19188     download big files over ethernet.
19189
19190     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19191
19192 commit cab99d6f3281ab6784feccf98b9b425daa58418a
19193 Author: Stefan Roese <sr@denx.de>
19194 Date:   Tue Apr 29 14:44:54 2008 +0200
19195
19196     ppc4xx: Fix compilation warning in denali_spd_ddr2.c
19197
19198     Signed-off-by: Stefan Roese <sr@denx.de>
19199
19200 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
19201 Author: Stefan Roese <sr@denx.de>
19202 Date:   Tue Apr 29 14:12:07 2008 +0200
19203
19204     ppc4xx: Fix Katmai CFG_MONITOR_LEN
19205
19206     Signed-off-by: Stefan Roese <sr@denx.de>
19207
19208 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
19209 Author: Stefan Roese <sr@denx.de>
19210 Date:   Tue Apr 29 13:57:07 2008 +0200
19211
19212     ppc4xx: Complete remove bogus dflush()
19213
19214     Since the current dflush() implementation is know to have some problems
19215     (as seem on lwmon5 ECC init) this patch removes it completely and replaces
19216     it by using clean_dcache_range().
19217
19218     Tested on Katmai with ECC DIMM.
19219
19220     Signed-off-by: Stefan Roese <sr@denx.de>
19221
19222 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
19223 Author: Stefan Roese <sr@denx.de>
19224 Date:   Tue Apr 29 13:36:51 2008 +0200
19225
19226     ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
19227
19228     As it seems the "old" ECC initialization routine by using dflush() didn't
19229     write all lines in the dcache back to memory on lwmon5. This could lead
19230     to ECC error upon Linux booting. This patch changes the program_ecc()
19231     routine to now use clean_dcache_range() instead of dflush().
19232     clean_dcache_range() uses dcbst which is exactly what we want in this
19233     case.
19234
19235     Since dflush() is known is cause problems, this routine will be
19236     removed completely and replaced by clean_dcache_range() with an
19237     additional patch.
19238
19239     Signed-off-by: Stefan Roese <sr@denx.de>
19240
19241 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
19242 Author: Yuri Tikhonov <yur@emcraft.com>
19243 Date:   Mon Apr 28 18:19:34 2008 +0200
19244
19245     POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
19246
19247     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19248
19249 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
19250 Author: Markus Brunner <super.firetwister@googlemail.com>
19251 Date:   Mon Apr 28 08:47:47 2008 +0200
19252
19253     ppc4xx: Fixup ebc clock in FDT for 405GP/EP
19254
19255     On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
19256     and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
19257     doesn't exist.
19258
19259     Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
19260
19261 commit 2ef7503a593c77a80c2a054011970227c4b62774
19262 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19263 Date:   Thu Apr 24 07:57:17 2008 +0200
19264
19265     NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
19266
19267     Move non-inlied functions into specific drivers file
19268     Set get_prom as weak
19269
19270     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19271     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
19272     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19273
19274 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
19275 Author: Guennadi Liakhovetski <lg@denx.de>
19276 Date:   Thu Apr 3 17:04:19 2008 +0200
19277
19278     net: make ARP timeout configurable
19279
19280     Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
19281     On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
19282     to the boards get lost, which typically are ARP replies. By configuring
19283     the timeout to a lower value we significantly improve the first network
19284     transfer time on this board. The timeout is specified in milliseconds,
19285     later internally it is converted to deciseconds, because it has to be
19286     converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
19287     different boards.
19288
19289     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19290     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19291
19292 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
19293 Author: Guennadi Liakhovetski <lg@denx.de>
19294 Date:   Thu Apr 3 13:36:18 2008 +0200
19295
19296     minor cs8900 driver clean up
19297
19298     Remove a redundant register definition, clean up some coding style
19299     violations.
19300
19301     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19302     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19303
19304 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
19305 Author: Wolfgang Denk <wd@denx.de>
19306 Date:   Mon Apr 28 22:01:04 2008 +0200
19307
19308     jffs2_1pass.c: fix incompatible pointer type warning
19309
19310     Signed-off-by: Wolfgang Denk <wd@denx.de>
19311
19312 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
19313 Author: Sascha Laue <Sascha.Laue@gmx.biz>
19314 Date:   Tue Apr 1 10:10:18 2008 +0200
19315
19316     lwmon5: update dsPIC POST spezification
19317
19318     The specification for the lwmon5 board dsPIC POST got changed.
19319     Also add defines for the temperatures  and voltages.
19320
19321     Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
19322
19323 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
19324 Author: Sascha Laue <Sascha.Laue@gmx.biz>
19325 Date:   Tue Apr 1 15:13:03 2008 +0200
19326
19327     Fix watchdog POST for lwmon5
19328
19329     If the hardware watchdog detects a voltage error, the watchdog sets
19330     GPIO62 to low. The watchdog POST has to detect this low level.
19331
19332     Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
19333     Signed-off-by: Wolfgang Denk <wd@denx.de>
19334
19335 commit dd5748bcd669f46aeb6686c1b341323843738ccc
19336 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
19337 Date:   Mon Apr 28 14:37:14 2008 +0200
19338
19339     rtl8169: fix compiler warnings
19340
19341     Fix multiple compiler warnings related to argument type mismatch.
19342
19343     Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
19344
19345 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
19346 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
19347 Date:   Mon Apr 28 14:36:06 2008 +0200
19348
19349     IDE: fix compiler warnings
19350
19351     The IDE driver can use 32-bit addresses in LBA mode, in which case it
19352     spits multiple warnings during compilation. Fix them.
19353
19354     Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
19355
19356 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
19357 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
19358 Date:   Mon Apr 28 14:35:57 2008 +0200
19359
19360     LinkStation: fix compiler warning, add a maintainer
19361
19362     out_8 wants a pointer to an unsigned as the first argument. Add a
19363     maintainer for Linkstation boards.
19364
19365     Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
19366
19367 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
19368 Author: Wolfgang Denk <wd@denx.de>
19369 Date:   Mon Apr 28 14:55:12 2008 +0200
19370
19371     cmd_nand.c: fix "differ in signedness" problem
19372
19373     Signed-off-by: Wolfgang Denk <wd@denx.de>
19374
19375 commit f2c288a35341ad02ac03b1563d786763c9c8f159
19376 Author: Wolfgang Denk <wd@denx.de>
19377 Date:   Mon Apr 28 12:48:47 2008 +0200
19378
19379     pcnet.c: fix a merge issue
19380
19381     Signed-off-by: Wolfgang Denk <wd@denx.de>
19382
19383 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
19384 Author: Wolfgang Denk <wd@denx.de>
19385 Date:   Mon Apr 28 12:08:18 2008 +0200
19386
19387     NAND: fix some strict-aliasing compiler warnings
19388
19389     Signed-off-by: Wolfgang Denk <wd@denx.de>
19390
19391 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
19392 Author: Stefan Roese <sr@denx.de>
19393 Date:   Mon Apr 28 11:37:14 2008 +0200
19394
19395     ppc4xx: Fix compile warning of hcu4 board
19396
19397     Signed-off-by: Stefan Roese <sr@denx.de>
19398
19399 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
19400 Author: Wolfgang Denk <wd@denx.de>
19401 Date:   Mon Apr 28 11:31:23 2008 +0200
19402
19403     MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
19404
19405     Signed-off-by: Wolfgang Denk <wd@denx.de>
19406
19407 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
19408 Author: Guennadi Liakhovetski <lg@denx.de>
19409 Date:   Mon Apr 28 00:25:32 2008 +0200
19410
19411     mx31ads: fix loadaddr environment variable define
19412
19413     Arithmetic expressions do not get evaluated under stringification. Remove
19414     default network configuration, add DHCP command support. Thanks to Felix
19415     Radensky for reporting.
19416
19417     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19418
19419 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
19420 Author: Wolfgang Denk <wd@denx.de>
19421 Date:   Mon Apr 28 10:55:24 2008 +0200
19422
19423     katmai: fix section overlap problem
19424
19425     Since we didn't want to remove features from the configuration, we
19426     decided to increase the U-Boot image size (add one flash sector).
19427
19428     Also changed the default environment definition to make it
19429     independent of such changes.
19430
19431     Signed-off-by: Wolfgang Denk <wd@denx.de>
19432     Acked-by: Stefan Roese <sr@denx.de>
19433
19434 commit 941d696d25624e3cc65ebf924199541acf52d74e
19435 Author: Wolfgang Denk <wd@denx.de>
19436 Date:   Mon Apr 28 10:55:24 2008 +0200
19437
19438     katmai: fix section overlap problem
19439
19440     Since we didn't want to remove features from the configuration, we
19441     decided to increase the U-Boot image size (add one flash sector).
19442
19443     Also changed the default environment definition to make it
19444     independent of such changes.
19445
19446     Signed-off-by: Wolfgang Denk <wd@denx.de>
19447     Acked-by: Stefan Roese <sr@denx.de>
19448
19449 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
19450 Author: Kumar Gala <galak@kernel.crashing.org>
19451 Date:   Sat Apr 26 11:44:44 2008 -0500
19452
19453     post: Fix building with O=
19454
19455     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19456
19457 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
19458 Author: Wolfgang Denk <wd@denx.de>
19459 Date:   Sat Apr 26 01:55:00 2008 +0200
19460
19461     Prepare v1.3.3-rc1
19462
19463     Signed-off-by: Wolfgang Denk <wd@denx.de>
19464
19465 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
19466 Author: Wolfgang Denk <wd@denx.de>
19467 Date:   Sat Apr 26 01:25:39 2008 +0200
19468
19469     post/Makefile: make sure to use the correct flags
19470
19471     ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
19472     messages to be printed.
19473
19474     Signed-off-by: Wolfgang Denk <wd@denx.de>
19475
19476 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
19477 Author: Wolfgang Denk <wd@denx.de>
19478 Date:   Sat Apr 26 00:34:42 2008 +0200
19479
19480     Coding Style cleanup, update CHANGELOG
19481
19482     Signed-off-by: Wolfgang Denk <wd@denx.de>
19483
19484 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
19485 Author: Magnus Lilja <lilja.magnus@gmail.com>
19486 Date:   Sun Apr 20 10:38:12 2008 +0200
19487
19488     i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
19489
19490     This patch enables SPI and MC13783/RTC support for the Litekit board.
19491
19492     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
19493
19494 commit f97abbfb47d9e407354e157cae3f6369e460cd37
19495 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
19496 Date:   Fri Apr 25 01:08:32 2008 -0500
19497
19498     MPC8544DS: decode pcie3 end-point configuration correctly.
19499
19500     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
19501     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19502
19503 commit 292188e15523c165c4269403fdcd33c26d89176e
19504 Author: Roy Zang <tie-fei.zang@freescale.com>
19505 Date:   Fri Apr 25 00:55:09 2008 -0500
19506
19507     MPC8544DS: Removes the unknown flash message information
19508
19509     This patch removes the unknown flash message information:
19510     '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
19511     This unknown flash message is caused by PromJet.
19512     Some of the board user is unhappy with this information.
19513
19514     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
19515     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19516
19517 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
19518 Author: Kim Phillips <kim.phillips@freescale.com>
19519 Date:   Thu Apr 24 14:07:38 2008 -0500
19520
19521     mpc83xx: bump loadaddr over fdtaddr to 0x500000
19522
19523     this seems as a good compromise between human memory, typing,
19524     and last but not least, to accommodate for current and future kernel bloat.
19525
19526     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19527     Acked-by: Dave Liu <daveliu@freescale.com>
19528
19529 commit be5a7190265a34d968578ff266549c60f6f57654
19530 Author: Dave Liu <r63238@freescale.com>
19531 Date:   Tue Apr 15 13:12:23 2008 +0800
19532
19533     mpc83xx: clean up the readme for 83xx boards
19534
19535     1. correct the typo
19536     2. correct the memory map for 837xerdb board
19537
19538     Signed-off-by: Dave Liu <daveliu@freescale.com>
19539
19540 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
19541 Author: Dave Liu <r63238@freescale.com>
19542 Date:   Tue Apr 15 13:11:11 2008 +0800
19543
19544     mpc83xx: remove the unused CPM's stuff
19545
19546     The MPC83xx family never have CPM block, so remove it from 83xx.
19547
19548     Signed-off-by: Dave Liu <daveliu@freescale.com>
19549
19550 commit c63ad6325a8ac0097a54b418a3288926b0484b18
19551 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19552 Date:   Fri Apr 18 16:29:40 2008 +0200
19553
19554     cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
19555
19556     This patch adds a configurable flash auto protection list that can be used
19557     to make U-Boot protect flash regions in flash_init().
19558
19559     The idea has been discussed on the u-boot mailing list starting
19560     on Nov 18th, 2007.
19561
19562     Even this patch brings a new feature it is used as a bugfix for 4xx
19563     platforms where flash_init() does not completely protect the
19564     monitor's flash range in all situations.
19565
19566     U-Boot protects the flash range from CFG_MONITOR_BASE to
19567     (CFG_MONITOR_BASE + monitor_flash_len  - 1) by default. This does not
19568     include the reset vector at 0xfffffffc.
19569
19570     Example:
19571     #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
19572
19573     This config option will auto protect the last 512k of flash that
19574     contains the bootloader on board like APC405 and PMC405.
19575
19576     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19577
19578 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
19579 Author: Stefan Roese <sr@denx.de>
19580 Date:   Fri Apr 25 13:59:03 2008 +0200
19581
19582     ppc4xx: Remove double defines in lwmon5.h
19583
19584     introduced with latest lwmon5/POST merge
19585
19586     Signed-off-by: Stefan Roese <sr@denx.de>
19587
19588 commit 7590378fb9c686709492ceb142825cd058255956
19589 Author: Bartlomiej Sieka <tur@semihalf.com>
19590 Date:   Fri Apr 25 13:54:02 2008 +0200
19591
19592     Use watchdog-aware functions when calculating hashes of images - take two
19593
19594     Some files didn't get updated properly with the "Use watchdog-aware
19595     functions when calculating hashes of images" commit, this commit
19596     fixes this.
19597
19598     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19599     Signed-off-by: Wolfgang Denk <wd@denx.de>
19600
19601 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
19602 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19603 Date:   Fri Apr 25 12:01:39 2008 +0200
19604
19605     ppc4xx: Add bootcount limit handling for APC405 boards
19606
19607     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19608
19609 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
19610 Author: Bartlomiej Sieka <tur@semihalf.com>
19611 Date:   Fri Apr 25 12:10:09 2008 +0200
19612
19613     Use watchdog-aware functions when calculating hashes of images
19614
19615     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19616
19617 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
19618 Author: Wolfgang Denk <wd@denx.de>
19619 Date:   Fri Apr 25 12:44:08 2008 +0200
19620
19621     USB: fix more GCC 4.2.x aliasing warnings
19622
19623     Signed-off-by: Wolfgang Denk <wd@denx.de>
19624     Acked-by: Markus Klotzbuecher <mk@denx.de>
19625
19626 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
19627 Author: Wolfgang Denk <wd@denx.de>
19628 Date:   Fri Apr 25 12:41:53 2008 +0200
19629
19630     lib_generic/crc32.c: add missing #include <watchdog.h>
19631
19632     Signed-off-by: Wolfgang Denk <wd@denx.de>
19633
19634 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
19635 Author: Wolfgang Denk <wd@denx.de>
19636 Date:   Fri Apr 25 11:52:21 2008 +0200
19637
19638     lib_generic/crc32.c: fix compile problem
19639
19640     Signed-off-by: Wolfgang Denk <wd@denx.de>
19641
19642 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
19643 Author: Stefan Roese <sr@denx.de>
19644 Date:   Tue Apr 22 12:20:32 2008 +0200
19645
19646     ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
19647
19648     The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
19649     environment variable will now get passed to the Linux kernel by setting
19650     the device_type property of the PCIe device tree node. For normal root-
19651     complex configuration it will keep its defaults value of "pci" and for
19652     endpoint configuration it will get changed to "pci-endpoint".
19653
19654     Signed-off-by: Stefan Roese <sr@denx.de>
19655
19656 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
19657 Author: Yuri Tikhonov <yur@emcraft.com>
19658 Date:   Thu Apr 24 10:30:53 2008 +0200
19659
19660     lwmon5: watchdog POST fix
19661
19662     Use the GPT0_MASKx registers as the temporary storage for watch-dog
19663     timer POST test instead of GPT0_COMPx. The latter
19664     (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
19665
19666     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
19667     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19668
19669 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
19670 Author: Kim Phillips <kim.phillips@freescale.com>
19671 Date:   Mon Apr 21 18:10:14 2008 -0500
19672
19673     lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
19674
19675     This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
19676     proven problematic getting right from the start at least on 83xx and
19677     4xx.
19678
19679     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19680
19681 commit a99715b8ebfc500f3f40e01b36b64d473938443d
19682 Author: Detlev Zundel <dzu@denx.de>
19683 Date:   Fri Apr 18 14:50:01 2008 +0200
19684
19685     Realining some header definitions.
19686
19687     Signed-off-by: Detlev Zundel <dzu@denx.de>
19688
19689 commit 4acbc6c7f993cae409c424615415a3e76820f13d
19690 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19691 Date:   Thu Apr 24 07:57:16 2008 +0200
19692
19693     NE2000: coding style cleanup
19694
19695     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19696
19697 commit b4aff1ffaf7120032c653357c007faa14f74d29d
19698 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19699 Date:   Wed Apr 23 00:11:47 2008 +0900
19700
19701     qemu-mips.h: Add CFI support
19702
19703     CONFIG_ENV_OVERWRITE is also added.
19704
19705     This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
19706
19707     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19708     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19709
19710 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
19711 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19712 Date:   Tue Apr 22 22:47:27 2008 +0900
19713
19714     doc/README.mips: Add MIPS notes
19715
19716     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19717
19718 commit 215b01bba8bc662d35f72b084700b192d367dfb4
19719 Author: Bartlomiej Sieka <tur@semihalf.com>
19720 Date:   Tue Apr 22 12:27:56 2008 +0200
19721
19722     Add support for calculating hashes with watchdog triggering
19723
19724     Implement watchodg-aware variants of hash calculation functions:
19725     - crc32_wd()
19726     - md5_wd()
19727     - sha1_csum_wd()
19728     The above functions calculate the hash of the input buffer in chunks,
19729     triggering the watchdog after processing each chunk. The chunk size
19730     is given as a function call parameter.
19731
19732     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19733
19734 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
19735 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
19736 Date:   Wed Apr 23 11:02:12 2008 +0900
19737
19738     qemu-mips: Cleanup whitespace, indentation, etc.
19739
19740     No functional change.
19741
19742     This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
19743     Then I re-created from scratch, and changed more lines than the original.
19744
19745     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19746     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19747
19748 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
19749 Author: Vlad Lungu <vlad@comsys.ro>
19750 Date:   Wed Oct 10 23:02:09 2007 +0300
19751
19752     Fixed pcnet io_base
19753
19754     Bus and phys address are not always the same
19755
19756     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
19757
19758 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
19759 Author: Wolfgang Denk <wd@denx.de>
19760 Date:   Thu Apr 24 23:44:26 2008 +0200
19761
19762     drivers/net/pcnet.c: Coding Style cleanup.
19763
19764     Signed-off-by: Wolfgang Denk <wd@denx.de>
19765
19766 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
19767 Author: Vlad Lungu <vlad@comsys.ro>
19768 Date:   Wed Oct 10 23:04:23 2007 +0300
19769
19770     Added Am79C970A chip id to pcnet
19771
19772     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
19773
19774 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
19775 Author: Magnus Lilja <lilja.magnus@gmail.com>
19776 Date:   Sun Apr 20 10:35:03 2008 +0200
19777
19778     i.MX31: Fix architecture numbers for ADS and Litekit boards
19779
19780     Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
19781
19782     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
19783
19784 commit e7ae84d6c7288790e88639f57cb60daf89c11369
19785 Author: Magnus Lilja <lilja.magnus@gmail.com>
19786 Date:   Sun Apr 20 10:36:36 2008 +0200
19787
19788     i.MX31: Use symbolic names for Litekit membases.
19789
19790     Use symbolic names instead of hard coded addresses for Litekit membases.
19791
19792     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
19793
19794 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
19795 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19796 Date:   Sat Apr 19 17:59:20 2008 +0200
19797
19798     Fix show_boot_progress prototype
19799
19800     in commit fad634071 "make show_boot_progress () weak."
19801     show_boot_progress is supposed to be declared as weak but declared as
19802     inline instead.
19803
19804     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19805
19806 commit edbed247a14d70b94958010f736621212285de91
19807 Author: Bartlomiej Sieka <tur@semihalf.com>
19808 Date:   Fri Apr 18 12:39:23 2008 +0200
19809
19810     Memory footprint optimizations
19811
19812     As suggested by Wolfgang Denk:
19813     - image printing functions:
19814       - remove wrappers
19815       - remove indentation prefix from functions' signatures
19816     - merge getenv_verify and getenv_autostart into one parametrized function
19817
19818     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19819
19820 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
19821 Author: Guennadi Liakhovetski <lg@denx.de>
19822 Date:   Tue Apr 15 13:33:11 2008 +0200
19823
19824     MX31ADS environment variable update, spi and rtc support
19825
19826     Update MX31ADS default environment to better match the flash layout and
19827     the memory map, support SPI and RTC.
19828
19829     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19830
19831 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
19832 Author: Kumar Gala <galak@kernel.crashing.org>
19833 Date:   Mon Apr 21 09:28:36 2008 -0500
19834
19835     85xx: Round up frequency calculations to get reasonable output
19836
19837     eg. because of rounding error we can get 799Mhz instead of 800Mhz.
19838
19839     Introduced DIV_ROUND_UP and roundup taken from linux kernel.
19840
19841     Signed-off-by: Dejan Minic <minic@freescale.com>
19842     Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
19843     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19844     Acked-by: Andy Fleming <afleming@freescale.com>
19845
19846 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
19847 Author: Kumar Gala <galak@kernel.crashing.org>
19848 Date:   Wed Apr 23 16:58:04 2008 -0500
19849
19850     fsl_pci: Only modify registers if we have them
19851
19852     pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
19853
19854     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19855
19856 commit 83fe32334337def160b302aa9d152d808bfcc68e
19857 Author: Markus Klotzbücher <mk@denx.de>
19858 Date:   Wed Apr 23 10:57:33 2008 +0200
19859
19860     USB: remove a cpu bug workaround for an unsupported architecture.
19861
19862     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
19863
19864 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
19865 Author: Markus Klotzbücher <mk@denx.de>
19866 Date:   Wed Apr 23 10:53:23 2008 +0200
19867
19868     USB: fix those pesky aliasing warnings issued by gcc-4.2
19869
19870     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
19871     Signed-off-by: Detlev Zundel <dzu@denx.de>
19872
19873 commit 89cdab788f3716b335fefb60b836ebcf975aceab
19874 Author: Mike Frysinger <vapier@gentoo.org>
19875 Date:   Mon Mar 31 11:02:01 2008 -0400
19876
19877     crc32: use uint32_t rather than unsigned long
19878
19879     The envcrc.c does sizeof(unsigned long) when calculating the crc, but
19880     this is done with the build toolchain instead of the target tool
19881     chain, so if the build is a 64bit system but the target is 32bits,
19882     the size will obviously be wrong. This converts all unsigned long
19883     stuff related to crc32 to uint32_t types. Compile tested only: output
19884     of ./tools/envcrc when run on a 32bit build system matches that of a
19885     64bit build system.
19886
19887     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
19888     Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19889
19890 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
19891 Author: Dirk Behme <dirk.behme@googlemail.com>
19892 Date:   Wed Mar 26 09:53:29 2008 +0100
19893
19894     ARM: Davinci: Fix DM644x timer overflow handling and cleanup
19895
19896     Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
19897
19898     Changes:
19899
19900     - Remove *_masked() functions as noted by Wolfgang
19901
19902     - Adapt register naming to recent TI spec (sprue26, March 2007)
19903
19904     - Fix reset_timer() handling
19905
19906     - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
19907
19908     [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
19909
19910     - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
19911
19912     Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
19913
19914     Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
19915
19916     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
19917     Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
19918
19919 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
19920 Author: Sergei Poselenov <sposelenov@emcraft.com>
19921 Date:   Wed Apr 9 16:09:41 2008 +0200
19922
19923     Added watchdog triggering calls in the "mtest" test function.
19924
19925     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
19926
19927 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
19928 Author: Yuri Tikhonov <yur@emcraft.com>
19929 Date:   Sun Apr 6 19:19:14 2008 +0200
19930
19931     lwmon5 watchdog: limit trigger rate
19932
19933     Limit the rate of h/w watch-dog triggering on the LWMON5 board by
19934     the CONFIG_WD_MAX_RATE value.
19935
19936     Note that an earlier version of this patch which used microseconds
19937     instead of ticks dis not work. The problem was that we used
19938     usec2ticks() to convert microseconds into ticks. usec2ticks() uses
19939     get_tbclk(), which in turn calls get_sys_info(). It turns out that
19940     this function does a lot of prolonged operations (like divisions)
19941     which take too much time so we do not trigger the watchdog in time,
19942     and it resets the system.
19943
19944     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19945
19946 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
19947 Author: Yuri Tikhonov <yur@emcraft.com>
19948 Date:   Mon Mar 31 10:51:37 2008 +0200
19949
19950     POST: move CONFIG_POST to Makefiles
19951
19952     Introduce the new logical option CONFIG_HAS_POST which is set when the
19953     platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
19954     to determine should the POST libs be compiled for the selected target
19955     platform, or not.
19956
19957     To avoid breaking u-boot linking process, the empty post/libpost.a file is
19958     created for platforms which do not have POSTs.
19959
19960     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19961     Signed-off-by: Wolfgang Denk <wd@denx.de>
19962
19963 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
19964 Author: Yuri Tikhonov <yur@emcraft.com>
19965 Date:   Mon Mar 31 10:49:34 2008 +0200
19966
19967     POST: preparations for moving CONFIG_POST to Makefiles
19968
19969     Remove CONFIG_POST ifdefs from the post/ source files.
19970
19971     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19972     Signed-off-by: Wolfgang Denk <wd@denx.de>
19973
19974 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
19975 Author: Stefan Roese <sr@denx.de>
19976 Date:   Tue Apr 22 14:14:20 2008 +0200
19977
19978     ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
19979
19980     This patch fixes the Canyonlands and Glacier default environment to better
19981     fit to the arch/powerpc device-tree kernels. The variables dealing with
19982     arch/ppc booting are removed, since these boards are supported only in
19983     arch/powerpc. Glacier uses the same config file as Canyonlands.
19984
19985     Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
19986
19987     Signed-off-by: Stefan Roese <sr@denx.de>
19988
19989 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
19990 Author: Stefan Roese <sr@denx.de>
19991 Date:   Tue Apr 22 14:06:42 2008 +0200
19992
19993     ppc4xx: Small coding style cleanup for the latest esd patches
19994
19995     Signed-off-by: Stefan Roese <sr@denx.de>
19996
19997 commit 79941d63bc03aed8c48d7602f18217cc200ee931
19998 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19999 Date:   Mon Apr 21 18:01:07 2008 +0200
20000
20001     ppc4xx: Update CPU strapping for PMC440 boards
20002
20003     This patch removes the temporary 'test' strapping option
20004     of the sbe command. The '667' strapping option now uses
20005     a PLB/PCI divider of 3.
20006
20007     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20008
20009 commit f00cf3193a6635355b121e90debb2f54e777e7da
20010 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20011 Date:   Mon Apr 21 14:42:21 2008 +0200
20012
20013     ppc4xx: Remove unused APC405 strataflash driver
20014
20015     The APC405 board support has been migrated to use the common
20016     CFI flash driver.
20017
20018     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20019
20020 commit 1c686676a86473bbd92151f0544e109413f6ed06
20021 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20022 Date:   Mon Apr 21 14:42:17 2008 +0200
20023
20024     ppc4xx: Update APC405 configuration
20025
20026     - enable esd's auto_update mechanism
20027     - support alternative flash layout on rev. 1.8 boards
20028     - update default environment
20029     - use common CFI flash driver
20030     - coding style cleanup
20031
20032     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20033
20034 commit 0b9872515a521bf7866dc24b85ddce708e60d702
20035 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20036 Date:   Mon Apr 21 14:42:11 2008 +0200
20037
20038     ppc4xx: Update APC405 board support
20039
20040     - enable esd's auto_update mechanism
20041     - fix LCD support on latest hardware revision (uses other LCD controller)
20042     - support alternative flash layout on rev. 1.8 boards
20043     - coding style cleanup
20044
20045     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20046
20047 commit 83975d02e225e231960784972e7820a8b303756b
20048 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20049 Date:   Mon Apr 21 14:42:06 2008 +0200
20050
20051     ppc4xx: update esd's common auto_update code for 405 boards
20052
20053     - Coding style cleanup (long lines)
20054     - improve handling of protected flash regions
20055     - remove dead code
20056
20057     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20058
20059 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
20060 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20061 Date:   Mon Apr 21 14:41:59 2008 +0200
20062
20063     ppc4xx: Update esd's common LCD code for 405 boards
20064
20065     - Coding style cleanup (long lines)
20066     - Add s1d13505 support
20067     - Make some functions return a result code instead of void
20068
20069     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20070
20071 commit dea68189424c3f1242427a8146a3861bf093173c
20072 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20073 Date:   Mon Apr 21 11:36:55 2008 +0200
20074
20075     ppc4xx: Update FPGA image for APC405 boards
20076
20077     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20078
20079 commit 2a05b152924acfcec3b037693329e517e6d3578f
20080 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20081 Date:   Mon Apr 21 11:36:08 2008 +0200
20082
20083     ppc4xx: Update bootlogo for APC405 boards
20084
20085     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20086
20087 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
20088 Author: Stefan Roese <sr@denx.de>
20089 Date:   Fri Apr 18 16:41:31 2008 +0200
20090
20091     ppc4xx: Add dcache_enable() for 440
20092
20093     dcache_enable() was missing for 440 and the patch
20094     017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
20095     "] behavior uses this function.
20096
20097     Note: Currently the cache handling functions like
20098     d/icache_disable/enable() are NOP's on 440. This may be changed in the
20099     future.
20100
20101     Signed-off-by: Stefan Roese <sr@denx.de>
20102
20103 commit a49e0d177a0749614b316ec847fb623f09c82c07
20104 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20105 Date:   Mon Apr 21 11:19:04 2008 +0200
20106
20107     video: Add missing free for logo memory
20108
20109     This patch adds two missing free()s.
20110
20111     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20112
20113 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
20114 Author: Troy Kisky <troy.kisky@boundarydevices.com>
20115 Date:   Mon Sep 24 16:41:43 2007 -0700
20116
20117     PATCH - Fix oob data copied into supplied buffer
20118
20119     This patch correctly sets the oobavail variable
20120     and fixes a bug where the oob data was not valid when
20121     there where multiple groups in oobfree.
20122
20123     First segment fixes a typo
20124     Second segment fixes a bug where oob data may be copied incorrectly.
20125     Third segment adds an error message when exiting due to write protect.
20126     Forth segment fixes a bug where oobavail may be set incorrectly.
20127
20128     Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
20129
20130 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
20131 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20132 Date:   Fri Apr 18 17:24:32 2008 +0200
20133
20134     ppc4xx: Fix sys_get_info() for 405GP(r)
20135
20136     This patch assigns the correct EBC clock for 405GP(r) CPUs
20137     to PPC4xx_SYS_INFO structure. Without this patch U-Boot
20138     uses an uninitialized EBC clock in its startup message.
20139
20140     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20141
20142 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
20143 Author: Wolfgang Denk <wd@denx.de>
20144 Date:   Sun Apr 20 15:39:38 2008 -0700
20145
20146     Makefile: remove nand_spl/System.map when cleaning up.
20147
20148 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
20149 Author: Wolfgang Denk <wd@denx.de>
20150 Date:   Sun Apr 20 15:35:52 2008 -0700
20151
20152     MAKEALL: sort entries / lists.
20153
20154     Signed-off-by: Wolfgang Denk <wd@denx.de>
20155
20156 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
20157 Author: Kumar Gala <galak@kernel.crashing.org>
20158 Date:   Fri Apr 18 11:29:01 2008 -0500
20159
20160     85xx: Fix size of cpu-release-addr property
20161
20162     The cpu-release-addr is defined as always being a 64-bit quanity regardless
20163     if we are running on a 32-bit or 64-bit machine.
20164
20165 commit 88353a985109562a639b2f8a0c90d77011bfe374
20166 Author: Timur Tabi <timur@freescale.com>
20167 Date:   Fri Apr 4 11:15:58 2008 -0500
20168
20169     Fix calculation of I2C clock for some 85xx chips
20170
20171     Some 85xx chips use CCB as the base clock for the I2C.  Some use CCB/2, and
20172     some use CCB/3.  There is no pattern that can be used to determine which
20173     chips use which frequency, so the only way to determine is to look up the
20174     actual SOC designation and use the right value for that SOC.
20175
20176     Update immap_85xx.h to include the GUTS PORDEVSR2 register.
20177
20178     Signed-off-by: Timur Tabi <timur@freescale.com>
20179
20180 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
20181 Author: Wolfgang Denk <wd@denx.de>
20182 Date:   Fri Apr 18 11:44:27 2008 -0700
20183
20184     Fix build breakage casued by commit c0559be371b2
20185
20186         Change env_get_char from a global function ptr to a function.
20187
20188     Signed-off-by: Wolfgang Denk <wd@denx.de>
20189
20190 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
20191 Author: Wolfgang Denk <wd@denx.de>
20192 Date:   Fri Apr 18 10:53:41 2008 -0700
20193
20194     Coding Style cleanup, update CHANGELOG.
20195
20196     Signed-off-by: Wolfgang Denk <wd@denx.de>
20197
20198 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
20199 Author: Mike Frysinger <vapier@gentoo.org>
20200 Date:   Tue Apr 8 14:00:57 2008 -0400
20201
20202     Add support for u-boot in svn and localversion-* files
20203
20204     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20205
20206 commit d23ff6827decf121461fbc5622612fd7effe207e
20207 Author: Guennadi Liakhovetski <lg@denx.de>
20208 Date:   Thu Apr 3 17:04:22 2008 +0200
20209
20210     MX31ADS network and flash updates
20211
20212     This patch allows U-Boot to use buffered writes to the Spansion NOR
20213     flash installed on this board, and eliminates long delays in network
20214     transfers after the board startup.
20215
20216     Also modify flash layout to embed main and redundant environment
20217     blocks in the U-Boot image.
20218
20219     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20220
20221 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
20222 Author: Guennadi Liakhovetski <lg@denx.de>
20223 Date:   Mon Apr 14 10:53:12 2008 +0200
20224
20225     Support for the MX31ADS evaluation board from Freescale
20226
20227     This patch adds support for the MX31ADS evaluation board from Freescale,
20228     initialization code is copied from RedBoot sources, also provided by
20229     Freescale.
20230
20231     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20232
20233 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
20234 Author: Stefan Roese <sr@denx.de>
20235 Date:   Tue Apr 8 10:33:29 2008 +0200
20236
20237     ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
20238
20239     Signed-off-by: Stefan Roese <sr@denx.de>
20240
20241 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
20242 Author: Stefan Roese <sr@denx.de>
20243 Date:   Tue Apr 8 10:33:28 2008 +0200
20244
20245     ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
20246
20247     Signed-off-by: Stefan Roese <sr@denx.de>
20248
20249 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
20250 Author: Stefan Roese <sr@denx.de>
20251 Date:   Tue Apr 8 10:33:27 2008 +0200
20252
20253     ppc4xx: Add Glacier NAND booting target
20254
20255     Signed-off-by: Stefan Roese <sr@denx.de>
20256
20257 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
20258 Author: Stefan Roese <sr@denx.de>
20259 Date:   Tue Apr 8 10:31:00 2008 +0200
20260
20261     nand_spl: Update nand_spl to support 2k page size NAND devices
20262
20263     This patch adds support for booting from 2k page sized NAND device
20264     (e.g. Micron 29F2G08AAC).
20265
20266     Tested on AMCC Canyonlands.
20267
20268     Signed-off-by: Stefan Roese <sr@denx.de>
20269
20270 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
20271 Author: Anatolij Gustschin <agust@denx.de>
20272 Date:   Thu Apr 17 18:18:00 2008 +0200
20273
20274     Fix crash on sequoia in ppc_4xx_eth_init
20275
20276     Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
20277     with cache enabled (TLB Parity exeption). This patch
20278     fixes the problem.
20279
20280     Signed-off-by: Anatolij Gustschin <agust@denx.de>
20281
20282 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
20283 Author: Anatolij Gustschin <agust@denx.de>
20284 Date:   Thu Apr 17 18:15:27 2008 +0200
20285
20286     ppc4xx: Fix crash on sequoia with cache enabled
20287
20288     Currently U-Boot crashes on sequoia board in CPU POST if
20289     cache is enabled (CONFIG_4xx_DCACHE defined). The cache
20290     won't be disabled by change_tlb before CPU POST because
20291     there is an insufficient adress range check since
20292     CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
20293     this problem.
20294
20295     Signed-off-by: Anatolij Gustschin <agust@denx.de>
20296
20297 commit 43c509254fab375c49936498da944658117ed07c
20298 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20299 Date:   Thu Apr 17 23:35:13 2008 +0900
20300
20301     Use jr as register jump instruction
20302
20303     Current assembler codes are inconsistent in the way of register jump
20304     instruction usage; some use jr, some use j. Of course GNU as allows both
20305     usages, but as can be expected from `Jump Register' the mnemonic `jr' is
20306     more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
20307     at all.
20308
20309     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20310
20311 commit 7ce63709828d37b08866e537339a169bd0db2bd3
20312 Author: Guennadi Liakhovetski <lg@denx.de>
20313 Date:   Tue Apr 15 14:15:30 2008 +0200
20314
20315     RTC driver for MC13783
20316
20317     MC13783 is a multifunction IS with an SPI interface to the host. This
20318     driver handles the RTC controller in this chip.
20319
20320     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20321
20322 commit 38254f45b0b412332726c90d3184ad47479fcffb
20323 Author: Guennadi Liakhovetski <lg@denx.de>
20324 Date:   Tue Apr 15 14:14:25 2008 +0200
20325
20326     New i.MX31 SPI driver
20327
20328     This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
20329     only implemented and tested on i.MX31, can with a modified register layout
20330     and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
20331     controllers too.
20332
20333     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20334
20335 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
20336 Author: Magnus Lilja <lilja.magnus@gmail.com>
20337 Date:   Tue Apr 15 19:09:10 2008 +0200
20338
20339     Fix name of i.MX31 boards in config file header
20340
20341     Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
20342
20343     Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
20344
20345 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
20346 Author: Mike Frysinger <vapier@gentoo.org>
20347 Date:   Sun Apr 13 19:42:19 2008 -0400
20348
20349     allow ports to override go behavior
20350
20351     Split the arch-specific logic out of the common go code and into a dedicated
20352     weak function called do_go_exec() that lives in cpu directories.  This will
20353     need review from i386/nios people to make sure I didn't break them.
20354
20355 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
20356 Author: Mike Frysinger <vapier@gentoo.org>
20357 Date:   Sun Apr 13 19:42:18 2008 -0400
20358
20359     allow ports to override bootelf behavior
20360
20361     Change the bootelf setup function into a dedicated weak function called
20362     do_bootelf_exec.  This way ports can control the behavior however they
20363     like before/after calling the ELF entry point.
20364
20365 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
20366 Author: Ulf Samuelsson <ulf@atmel.com>
20367 Date:   Sat Apr 12 20:56:03 2008 +0200
20368
20369     Reorder ARM boards in Makefile
20370
20371     Rearrange ARM boards in Makefile so that ARM926EJ-S boards
20372     are no longer under ARM92xT header.
20373
20374     Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
20375     Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20376
20377 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
20378 Author: Ulf Samuelsson <ulf@atmel.com>
20379 Date:   Sat Apr 12 20:29:44 2008 +0200
20380
20381     Clean up dataflash partitioning
20382
20383     This patch removes the board dependent parts from
20384     "drivers/mtd/dataflash.c".
20385     Each board relying on this, will have the appropriate
20386     code in a new file, "partition.c" in the board directory.
20387     board Makefiles updated to use the file.
20388
20389     The dataflash partitions are aligned on sector/page boundaries.
20390
20391     The CONFIG_NEW_DF_PARTITION was used to create named partitions
20392     This is now the default operation, and the CONFIG variable is removed.
20393
20394     Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
20395
20396 commit 51ecde946fec511a16346e498204ca10ad71080d
20397 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20398 Date:   Sat Apr 12 14:08:45 2008 +0200
20399
20400     gitignore: udpate stgit generated and .patch file
20401
20402     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20403
20404 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
20405 Author: Wolfgang Denk <wd@denx.de>
20406 Date:   Fri Apr 18 00:15:36 2008 -0700
20407
20408     Get rid of redundant copy of renamed header file.
20409
20410     Signed-off-by: Wolfgang Denk <wd@denx.de>
20411
20412 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
20413 Author: Vlad Lungu <vlad@comsys.ro>
20414 Date:   Fri Apr 11 21:20:14 2008 +0300
20415
20416     Fix dependency generation for older gcc versions
20417
20418      With gcc 3.3.3 at least, compilation fails with
20419
20420     Generating include/autoconf.mk
20421     gcc: compilation of header file requested
20422     make: *** [include/autoconf.mk] Error 1
20423
20424     since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
20425
20426     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
20427
20428 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
20429 Author: Marian Balakowicz <m8@semihalf.com>
20430 Date:   Fri Apr 11 11:07:49 2008 +0200
20431
20432     Restore the ability to continue booting after legacy image overwrite
20433
20434     Before new uImage code was merged, bootm code allowed for the kernel image to
20435     get overwritten during decompresion. new uImage introduced a check for image
20436     overwrites and refused to boot the image that got overwritten. This patch
20437     restores the old behavior. It also adds a warning when the image overwriten is
20438     a multi-image file, because in such case accessing componentes other than the
20439     first one will fail.
20440
20441     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20442
20443 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
20444 Author: Marian Balakowicz <m8@semihalf.com>
20445 Date:   Fri Apr 11 11:07:43 2008 +0200
20446
20447     ppc: Fix ftd_blob variable init when processing raw blob
20448
20449     Set fdt_blob variable before its value is printed out.
20450
20451     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20452
20453 commit 3d36be030043cd841a2551d00a395135e363a64b
20454 Author: Jason Wessel <jason.wessel@windriver.com>
20455 Date:   Thu Apr 10 14:30:16 2008 -0500
20456
20457     Remove all the search paths from the .lds files.
20458
20459     The cross compiler is responsible for providing the correct libraries
20460     and the logic to find the linking libraries.
20461
20462     Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
20463
20464 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
20465 Author: Bartlomiej Sieka <tur@semihalf.com>
20466 Date:   Mon Apr 14 15:44:16 2008 +0200
20467
20468     Boot-related documentation update
20469
20470     - document 'bootm_low' and 'bootm_size' environment variables
20471     - update inaccurate CFG_BOOTMAPSZ entry
20472
20473     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20474
20475 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
20476 Author: Guennadi Liakhovetski <lg@denx.de>
20477 Date:   Wed Apr 9 17:34:08 2008 +0200
20478
20479     Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
20480
20481     Restore logic reverted by commit
20482
20483     commit 80767a6cead9990d9e77e62be947843c2c72f469
20484     Author: Peter Pearse <peter.pearse@arm.com>
20485     Date:   Wed Sep 5 16:04:41 2007 +0100
20486
20487         Changed API name to coloured_led.h
20488         Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
20489         Tidied other cpu/arm920t/start.S code
20490
20491     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20492
20493 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
20494 Author: Mike Frysinger <vapier@gentoo.org>
20495 Date:   Tue Apr 8 10:24:24 2008 -0400
20496
20497     Remove conflicting NAND ID
20498
20499     There are two NAND entries with ID 0xDC and this obviously causes problems.
20500     In the kernel, they punted the first entry, so we should do the same.
20501
20502     See this upstream e-mail for more info:
20503     http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
20504
20505     Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
20506     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20507
20508 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
20509 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20510 Date:   Tue Apr 8 16:20:35 2008 +0900
20511
20512     cpu/mips/cpu.c: Fix flush_cache bug
20513
20514     Cache operations have to take line address (addr), not start_addr.
20515     I noticed this bug when debugging ping failure.
20516
20517     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20518
20519 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
20520 Author: Martin Krause <martin.krause@tqs.de>
20521 Date:   Thu Apr 3 14:29:01 2008 +0200
20522
20523     TQM5200: fix default IDE reset level
20524
20525     Before the first call of ide_reset(), the level of the IDE reset
20526     signal on the TQM5200 is low (reset asserted). This patch sets the
20527     default value to high (reset not asserted).
20528
20529     Currently this patch fixes no real problem, but it is cleaner to
20530     assert the reset signal only on demand, and not permanently.
20531
20532     Signed-off-by: Martin Krause <martin.krause@tqs.de>
20533
20534 commit c61e033d6e8abb7b4060ee36060961e1399f6079
20535 Author: Detlev Zundel <dzu@denx.de>
20536 Date:   Thu Apr 3 14:18:48 2008 +0200
20537
20538     mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
20539
20540     Signed-off-by: Detlev Zundel <dzu@denx.de>
20541
20542 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
20543 Author: Detlev Zundel <dzu@denx.de>
20544 Date:   Thu Apr 3 14:18:47 2008 +0200
20545
20546     mgcoge, mgsuv: rename 'addcon' to 'addcons'
20547
20548     The latter name with 13 users is already established, so we will use
20549     that.
20550
20551     Signed-off-by: Detlev Zundel <dzu@denx.de>
20552
20553 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
20554 Author: Martin Krause <martin.krause@tqs.de>
20555 Date:   Thu Apr 3 13:37:56 2008 +0200
20556
20557     IDE: fix bug in reset sequence
20558
20559     According to the ata (ata5) specification the RESET- signal
20560     shall be asserted for at least 25 us. Without this patch,
20561     the RESET- signal is asserted on some boards for only < 1 us
20562     (e. g. on the TQM5200). This patch adds a general delay of
20563     25 us to the RESET- signal.
20564
20565     Without this patch a Platinum 4 GiB CF card is not recognised
20566     properly on boards with a TQM5200 (STK52xx, TB5200).
20567
20568     Signed-off-by: Martin Krause <martin.krause@tqs.de>
20569
20570 commit 813bea96a960916c72b4a3a7df840151529c26ce
20571 Author: Sascha Laue <Sascha.Laue@gmx.biz>
20572 Date:   Thu Apr 3 14:43:11 2008 +0200
20573
20574     lwmon5: disable CONFIG_ZERO_BOOTDELAY
20575
20576     Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
20577
20578 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
20579 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20580 Date:   Wed Apr 2 08:03:58 2008 +0200
20581
20582     ds174x: Fix warning on return in rtc_get and rtc_set functions
20583
20584     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20585
20586 commit a253b38bf50c85227c33ca0febc870ee49d1588e
20587 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20588 Date:   Wed Apr 2 08:03:57 2008 +0200
20589
20590     cmd_log.c: Fix assignment differ in signedness
20591
20592     In function 'logbuff_init_ptrs':
20593     cmd_log.c:79: warning: pointer targets in assignment differ in signedness
20594
20595     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20596
20597 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
20598 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
20599 Date:   Wed Apr 2 11:04:43 2008 +0530
20600
20601     Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
20602
20603     Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
20604
20605 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
20606 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20607 Date:   Tue Apr 1 14:07:10 2008 +0200
20608
20609     s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
20610
20611     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20612
20613 commit c08fb3ea36d19b1640b7906264581e9105534399
20614 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
20615 Date:   Tue Apr 15 10:24:14 2008 +0200
20616
20617     Additional PCI IDs for IDE and network controllers
20618
20619     These PCI IDs are required by the Linkstation platforms.
20620
20621     Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
20622
20623 commit c0559be371b2a64b1a817088c3308688e2182f93
20624 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
20625 Date:   Mon Apr 14 23:01:50 2008 +0200
20626
20627     Change env_get_char from a global function ptr to a function.
20628
20629     This avoids an early global data reference.
20630
20631     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
20632
20633 commit 3e0f331c05d72f140715c1e9fca991927e44d422
20634 Author: Guennadi Liakhovetski <lg@denx.de>
20635 Date:   Tue Apr 29 12:35:08 2008 +0000
20636
20637     Clean up smsc911x driver
20638
20639     Replace direct register address derefencing with accessor functions.
20640     Restrict explicitly 32-bit bus-width, extend affected configurations
20641     respectively.
20642
20643     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20644     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20645
20646 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
20647 Author: Sascha Hauer <s.hauer@pengutronix.de>
20648 Date:   Tue Apr 15 00:08:20 2008 -0400
20649
20650     This patch adds a driver for the following smsc network controllers:
20651     LAN9115
20652     LAN9116
20653     LAN9117
20654     LAN9215
20655     LAN9216
20656     LAN9217
20657
20658     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
20659     Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
20660     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20661
20662 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
20663 Author: Sascha Laue <Sascha.Laue@gmx.biz>
20664 Date:   Tue Apr 1 15:13:03 2008 +0200
20665
20666     Fix watchdog POST for lwmon5
20667
20668     If the hardware watchdog detects a voltage error, the watchdog sets
20669     GPIO62 to low. The watchdog POST has to detect this low level.
20670
20671     Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
20672
20673 commit 24b448448a917e52806f82660a5c9d47608894fb
20674 Author: Dave Liu <r63238@freescale.com>
20675 Date:   Tue Apr 1 15:22:11 2008 +0800
20676
20677     ata: update the libata.h from ata.h of linux kernel
20678
20679     Current libata.h of u-boot is out of sync from linux kernel,
20680     this patch make it be consistent with linux kernel.
20681
20682     Signed-off-by: Dave Liu <daveliu@freescale.com>
20683     Signed-off-by: Tor Krill <tor@excito.com>
20684
20685 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
20686 Author: Kumar Gala <galak@kernel.crashing.org>
20687 Date:   Mon Mar 31 11:59:27 2008 -0500
20688
20689     Allow use of ARCH=powerpc when building
20690
20691     The linux kernel is now mostly ARCH=powerpc, so to make life easier
20692     allow use to use ARCH=powerpc and convert it to ARCH=ppc.
20693
20694     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20695
20696 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
20697 Author: Kyungmin Park <kmpark@infradead.org>
20698 Date:   Mon Mar 31 10:40:54 2008 +0900
20699
20700     Add apollon board MAINTAINERS entry
20701
20702     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
20703
20704 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
20705 Author: Kyungmin Park <kmpark@infradead.org>
20706 Date:   Mon Mar 31 10:40:36 2008 +0900
20707
20708     Fix OneNAND read
20709
20710     It should access with 16-bit instead of 8-bit
20711
20712     Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
20713
20714     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
20715
20716 commit a9da2b41079d230db3a5641625311983f85ce1fb
20717 Author: Kyungmin Park <kmpark@infradead.org>
20718 Date:   Mon Mar 31 10:40:19 2008 +0900
20719
20720     Fix OneNAND erase command
20721
20722     It mis-calculates the block address.
20723     Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
20724
20725     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
20726
20727 commit 61525f2ffa156665a66908fda47dbf29d65ea579
20728 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
20729 Date:   Mon Mar 31 01:32:15 2008 +0200
20730
20731     Support for LinkStation / KuroBox HD and HG PPC models
20732
20733     This patch is based on the port by Mihai Georgian (see linkstation.c for
20734     Copyright information) and implements support for LinkStation / KuroBox HD
20735     and HG PPC models from Buffalo Technology, whereby HD is deactivated at
20736     the moment, pending network driver fixing.
20737
20738     Notice to users: this is pretty much a barebone port. Support for network
20739     on HG models is already in the U-Boot mainline, but you might also want
20740     patches to switch fan / phy modes depending on the negotiated ethernet
20741     parameters. This patch also doesn't support console switching, booting EM
20742     mode, Buffalo specific ext2 magic number. So, if you want to use any of
20743     those, you need additional patches. Otherwise this patche provides a fully
20744     functional u-boot with a network console on your system.
20745
20746     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20747
20748 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
20749 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20750 Date:   Sun Mar 30 01:22:13 2008 -0500
20751
20752     Add CONFIG_MII_INIT support to related boards
20753
20754     Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
20755     cmd_init.c. Add CONFIG_MII_INIT to board configuration files
20756     that use mii_init() in cmd_init.c.
20757
20758     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20759     Acked-by: Ben Warren <biggerbadderben@gmail.com>
20760
20761 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
20762 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20763 Date:   Sun Mar 30 01:19:06 2008 -0500
20764
20765     Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
20766
20767     Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
20768     CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
20769
20770     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20771
20772 commit e99ccb488181d012248c6be30b2093e950319fc5
20773 Author: Kumar Gala <galak@kernel.crashing.org>
20774 Date:   Thu Mar 27 11:46:38 2008 -0500
20775
20776     Introduce phys_size_t and move phys_addr_t into asm/types.h
20777
20778     Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
20779     that have larger physical addresses like 44x, 85xx, and 86xx.
20780
20781     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20782
20783 commit 20a14a42a25f72e379f38460b8a8484667536795
20784 Author: Andy Fleming <afleming@freescale.com>
20785 Date:   Wed Apr 2 16:19:07 2008 -0500
20786
20787     Rename include/md5.h to include/u-boot/md5.h
20788
20789     Some systems have md5.h installed in /usr/include/. This isn't the
20790     desired file (we want the one in include/md5.h). This will avoid the
20791     conflict. This fixes the host tools building problem by creating a new
20792     directory for U-Boot specific header files.
20793
20794     [Patch by Andy Fleming, modified to use separate directory by Wolfgang
20795     Denk]
20796
20797     Signed-off-by: Wolfgang Denk <wd@denx.de>
20798     Signed-off-by: Andy Fleming <afleming@freescale.com>
20799     Acked-by: Timur Tabi <timur@freescale.com>
20800
20801 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
20802 Author: Dave Liu <r63238@freescale.com>
20803 Date:   Thu Mar 27 18:51:17 2008 +0800
20804
20805     drivers: code clean up
20806
20807     Signed-off-by: Dave Liu <daveliu@freescale.com>
20808
20809 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
20810 Author: Dave Liu <r63238@freescale.com>
20811 Date:   Thu Mar 27 18:50:41 2008 +0800
20812
20813     drivers: clean up the ata_piix.h
20814
20815     Signed-off-by: Dave Liu <daveliu@freescale.com>
20816
20817 commit e8f7ba404f1409606962815ecc955a06984b08b3
20818 Author: Dave Liu <r63238@freescale.com>
20819 Date:   Thu Mar 27 18:49:56 2008 +0800
20820
20821     doc: english polishing for README.sata
20822
20823     according to gvb's suggestion, polishing for the doc.
20824
20825     Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
20826     Signed-off-by: Dave Liu <daveliu@freescale.com>
20827
20828 commit 3e3f766a5274d204780460e1879723b565296d34
20829 Author: Kumar Gala <galak@kernel.crashing.org>
20830 Date:   Wed Mar 26 18:53:28 2008 -0500
20831
20832     Fix warnings introduced by I2C bus speed setting patch
20833
20834     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20835
20836 commit 3c735e7437150e8615f26930c7819db85634276d
20837 Author: eran liberty <eran.liberty@gmail.com>
20838 Date:   Thu Mar 27 00:50:49 2008 +0100
20839
20840     Altera Stratix II support
20841
20842     Adds Support for Altera's Stratix II.
20843
20844     Within your board specific init file you will have to call
20845
20846     1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
20847     2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
20848
20849     Altera_desc* contines (for example):
20850         {
20851          Altera_StratixII,      /* part type */
20852          passive_serial,        /* interface type */
20853          1,                     /* bytes of data part can accept */
20854          (void *)(&funcs),      /* interface function table */
20855          0L,                    /* base interface address */
20856          0                      /* implementation specific cookie */
20857          }
20858
20859     funcs is the interface. It is of type altera_board_specific_func.
20860     It looks like this:
20861     altera_board_specific_func func = {
20862         pre_fn,
20863         config_fn,
20864         status_fn,
20865         done_fn,
20866         clk_fn,
20867         data_fn,
20868         abort_fn,
20869         post_fn,
20870     };
20871
20872     you will have to implement these functions, which is usually bit
20873     banging some gpio.
20874
20875     Signed-off-by: Eran Liberty <liberty@extricom.com>
20876
20877 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
20878 Author: Wolfgang Denk <wd@denx.de>
20879 Date:   Sun Apr 13 14:32:54 2008 -0700
20880
20881     Update CHANGELOG
20882
20883     Signed-off-by: Wolfgang Denk <wd@denx.de>
20884
20885 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
20886 Author: Sascha Hauer <s.hauer@pengutronix.de>
20887 Date:   Wed Mar 26 20:41:17 2008 +0100
20888
20889     Phytec Phycore-i.MX31 support
20890
20891     This patch adds support for the Phytec Phycore-i.MX31 board
20892
20893     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
20894     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20895
20896 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
20897 Author: Sascha Hauer <s.hauer@pengutronix.de>
20898 Date:   Wed Mar 26 20:41:09 2008 +0100
20899
20900     mx31 litekit support
20901
20902     This patch adds support for the mx31 litekit board
20903
20904     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
20905     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20906
20907 commit cdace0661208754a53019ea0dc7b803a040e0939
20908 Author: Sascha Hauer <s.hauer@pengutronix.de>
20909 Date:   Wed Mar 26 20:40:49 2008 +0100
20910
20911     add an i2c driver for mx31
20912
20913     This patch adds an i2c driver for Freescale i.MX processors
20914
20915     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
20916     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20917
20918 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
20919 Author: Sascha Hauer <s.hauer@pengutronix.de>
20920 Date:   Wed Mar 26 20:40:42 2008 +0100
20921
20922     core support for Freescale mx31
20923
20924     This patch adds the core support for Freescale mx31
20925
20926     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
20927     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20928
20929 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
20930 Author: Wolfgang Denk <wd@denx.de>
20931 Date:   Sun Apr 13 14:19:23 2008 -0700
20932
20933     Fix compile error
20934
20935     ...as suggested by Peter Pearse
20936
20937     Signed-off-by: Wolfgang Denk <wd@denx.de>
20938
20939 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
20940 Author: Sascha Hauer <s.hauer@pengutronix.de>
20941 Date:   Wed Mar 26 20:40:36 2008 +0100
20942
20943     Separate omap24xx specific code from arm1136
20944
20945     Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
20946     to cpu/arm1136/omap24xx.
20947
20948     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
20949     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20950
20951 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
20952 Author: Mike Frysinger <vapier@gentoo.org>
20953 Date:   Tue Jan 29 18:21:05 2008 -0500
20954
20955     disable caches before booting an app for Blackfin apps
20956
20957     It isn't generally save to execute applications outside of U-Boot with caches
20958     enabled due to the way the Blackfin processor handles caches (requires
20959     software assistance).  This patch disables caches before booting an ELF or
20960     just booting raw code.  The previous discussion on the patch was that we
20961     wanted to use weaks instead, but that proved to not be feasible when multiple
20962     symbols are involved, which puts us back at the ifdef solution.  I've
20963     minimized the ugliness by moving the setup step outside of the main function.
20964
20965     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20966
20967 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
20968 Author: Wolfgang Denk <wd@denx.de>
20969 Date:   Sun Apr 13 10:03:54 2008 -0700
20970
20971     ppc: Get rid of unused machine type definitions
20972
20973     Signed-off-by: Wolfgang Denk <wd@denx.de>
20974
20975 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
20976 Author: Wolfgang Denk <wd@denx.de>
20977 Date:   Sun Apr 13 09:59:26 2008 -0700
20978
20979     Coding Style cleanup; update CHANGELOG
20980
20981     Signed-off-by: Wolfgang Denk <wd@denx.de>
20982
20983 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
20984 Author: Larry Johnson <lrj@acm.org>
20985 Date:   Thu Feb 21 13:58:11 2008 -0500
20986
20987     LM73 bug fix for negative temperatures and cleanup
20988
20989     When the LM73 temperature sensor measures a temperature below 0 C, the
20990     current driver does not perform sign extension, so the result returned is
20991     512 C too high.  This patch fixes the problem, and does general cleanup
20992     of the code.
20993
20994     Signed-off-by: Larry Johnson <lrj@acm.org>
20995
20996 commit 96ef831f713289afba19da0c8f905e99da2b23e0
20997 Author: Guennadi Liakhovetski <lg@denx.de>
20998 Date:   Thu Apr 3 13:36:02 2008 +0200
20999
21000     cfi_flash: Support buffered writes on non-standard Spansion NOR flash
21001
21002     Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
21003     series require different addresses for buffered write commands. Define a
21004     configuration option to support buffered writes on those chips. A more
21005     elegant solution would be to automatically detect those chips by parsing
21006     their CFI records, but that would require introduction of a fixup table
21007     into the cfi_flash driver.
21008
21009     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21010
21011 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
21012 Author: Lee Nipper <lee.nipper@freescale.com>
21013 Date:   Thu Apr 10 09:35:06 2008 -0500
21014
21015     mpc83xx: Update DIMM data bus width test to support 40-bit width
21016
21017     32-bit wide ECC memory modules report 40-bit width.
21018     Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
21019
21020     Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
21021     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21022
21023 commit 5fb5a689d822ca61e814bd523fc930af335242fa
21024 Author: Dave Liu <r63238@freescale.com>
21025 Date:   Mon Mar 31 17:05:12 2008 +0800
21026
21027     mpc83xx: Fix the bug of serdes initialization
21028
21029     Currently the serdes will not be initializated due to the
21030     partid's error.
21031
21032     Signed-off-by: Dave Liu <daveliu@freescale.com>
21033     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21034
21035 commit 2000784818f043db7ca60e2846a72d097766b894
21036 Author: Dave Liu <r63238@freescale.com>
21037 Date:   Thu Apr 3 16:28:29 2008 +0800
21038
21039     mpc83xx: Fix the SATA clock setting of 837x targets
21040
21041     Currently the SATA controller clock is configured as CSB clock,
21042     usually the CSB clock is 400/333/266MHz.
21043
21044     However, The SATA IP block is only guaranteed to operate up to
21045     200 MHz as stated in the HW spec.
21046
21047     The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
21048
21049     This patch makes the SATA clock as half of CSB clock.
21050
21051     Signed-off-by: Dave Liu <daveliu@freescale.com>
21052     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21053
21054 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
21055 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21056 Date:   Wed Apr 2 13:41:21 2008 +0200
21057
21058     mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
21059
21060     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21061     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21062
21063 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
21064 Author: Kumar Gala <galak@kernel.crashing.org>
21065 Date:   Wed Apr 9 04:20:57 2008 -0500
21066
21067     85xx: Fix detection of MP cpu spin up
21068
21069     We were looking at the wrong memory offset to determine of a secondary
21070     cpu had been spun up or not.  Also added a warning message if the
21071     all the secondary cpus we expect don't spin up.
21072
21073     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21074
21075 commit f3e04bdc3f360c66801a9048956e61e41a16edba
21076 Author: Kumar Gala <galak@kernel.crashing.org>
21077 Date:   Tue Apr 8 10:45:50 2008 -0500
21078
21079     85xx: Use SVR_SOC_VER instead of SVR_VER
21080
21081     The recent change introduced by 'Update SVR numbers to expand support'
21082     now requires that we use SVR_SOC_VER instead of SVR_VER if we want
21083     to compare against a particular processor id.
21084
21085     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21086
21087 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
21088 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
21089 Date:   Fri Apr 11 10:00:35 2008 -0400
21090
21091     ppc4xx: Fix power mgt definitions for PPC440
21092
21093     Corrected DCR addresses of PPC440EP power management registers.
21094
21095     Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
21096
21097 commit 950a392464e616b4590bc4501be46e2d7d162dea
21098 Author: Wolfgang Denk <wd@denx.de>
21099 Date:   Fri Apr 11 15:11:26 2008 +0200
21100
21101     Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
21102
21103     Reverting became necessary after it turned out that the patches in
21104     the u-boot-arm repo were modified, and in some cases corrupted.
21105
21106     This reverts the following commits:
21107
21108         066bebd6353e33af3adefc3404560871699e9961
21109         7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
21110         c88ae20580b2b01487b4cdcc8b2a113f551aee36
21111         a147e56f03871bba4f05058d5e04ce7deb010b04
21112         d6674e0e2a6a1f033945f78838566210d3f28c95
21113         8c8463cce44d849e37744749b32d38e1dfb12e50
21114         c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
21115         8bf69d81782619187933a605f1a95ee1d069478d
21116         8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
21117         a574a73852a527779234e73e17e7597fd8128882
21118         1377b5583a48021d983e1fd565f7d40c89e84d63
21119         1704dc20917b4f71e373e2c888497ee666d40380
21120
21121     Signed-off-by: Wolfgang Denk <wd@denx.de>
21122
21123 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
21124 Author: Stefan Roese <sr@denx.de>
21125 Date:   Fri Apr 11 07:02:29 2008 +0200
21126
21127     ppc4xx: Update Kilauea defconfig to use device-tree booting as default
21128
21129     This patch reworks the default environment on Kilauea/Haleakala. Now
21130     "net_nfs" for exmaple uses the device-tree style booting formerly know
21131     as "net_nfs_fdt". Also the addresses in RAM were changed because of the
21132     new image booting support, which check for image overwriting. So the
21133     addresses needed togeet adjusted.
21134
21135     Signed-off-by: Stefan Roese <sr@denx.de>
21136
21137 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
21138 Author: Stefan Roese <sr@denx.de>
21139 Date:   Wed Apr 9 11:58:02 2008 +0200
21140
21141     ppc4xx: Fix Canyonlands default environment to work with new image support
21142
21143     Since the new image support checks for image overwriting, the default
21144     environment needs to get adjusted to use correct addresses.
21145
21146     Signed-off-by: Stefan Roese <sr@denx.de>
21147
21148 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
21149 Author: Stefan Roese <sr@denx.de>
21150 Date:   Wed Apr 9 11:54:11 2008 +0200
21151
21152     ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
21153
21154     The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
21155     closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
21156     on 4xx systems _start currently cannot be used for this calculation.
21157     So revert back to the original version for now.
21158
21159     Signed-off-by: Stefan Roese <sr@denx.de>
21160
21161 commit f91374f65eae8b42cac329e06ba1c54728278efb
21162 Author: Michal Simek <monstr@monstr.eu>
21163 Date:   Fri Mar 28 12:49:52 2008 +0100
21164
21165     microblaze: Sort microblaze boards in MAKEALL script
21166
21167 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
21168 Author: Michal Simek <monstr@monstr.eu>
21169 Date:   Fri Mar 28 11:58:45 2008 +0100
21170
21171     microblaze: clean microblaze_config.mk
21172
21173     FLAGS are generated by U-BOOT generator.
21174     Board specific FLAGS are in board directory
21175
21176     Signed-off-by: Michal Simek <monstr@monstr.eu>
21177
21178 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
21179 Author: Michal Simek <monstr@monstr.eu>
21180 Date:   Fri Mar 28 12:47:19 2008 +0100
21181
21182     microblaze: xupv2p fix config file for supporting FDT
21183
21184 commit 188dc16b189143573b1ed90e584bf866d75cdd12
21185 Author: Michal Simek <monstr@monstr.eu>
21186 Date:   Fri Mar 28 11:53:02 2008 +0100
21187
21188     microblaze: ml401 fix config file for supporting FDT
21189
21190     Signed-off-by: Michal Simek <monstr@monstr.eu>
21191
21192 commit 4c6a6f02e239236261333759997eeaf86b30b54c
21193 Author: Michal Simek <monstr@monstr.eu>
21194 Date:   Fri Mar 28 11:22:48 2008 +0100
21195
21196     microblaze: ml401 - add ifdef for GPIO
21197
21198     Signed-off-by: Michal Simek <monstr@monstr.eu>
21199
21200 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
21201 Author: Michal Simek <monstr@monstr.eu>
21202 Date:   Fri Mar 28 12:13:03 2008 +0100
21203
21204     microblaze: clean uart16550 and uartlite handling
21205
21206     Signed-off-by: Michal Simek <monstr@monstr.eu>
21207
21208 commit 0b20f250877441460fb79d72192954abe8498834
21209 Author: Michal Simek <monstr@monstr.eu>
21210 Date:   Fri Mar 28 11:08:31 2008 +0100
21211
21212     microblaze: Add Emaclite driver to Makefile
21213
21214     Signed-off-by: Michal Simek <monstr@monstr.eu>
21215
21216 commit 868cde5310f88234b774878e4f06e79df10a88b3
21217 Author: Michal Simek <monstr@monstr.eu>
21218 Date:   Fri Mar 28 11:08:01 2008 +0100
21219
21220     microblaze: Add Emac driver to Makefile
21221
21222     Signed-off-by: Michal Simek <monstr@monstr.eu>
21223
21224 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
21225 Author: Michal Simek <monstr@monstr.eu>
21226 Date:   Fri Mar 28 12:42:29 2008 +0100
21227
21228     microblaze: add Emac ethernet driver
21229
21230 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
21231 Author: Michal Simek <monstr@monstr.eu>
21232 Date:   Fri Mar 28 12:41:56 2008 +0100
21233
21234     microblaze: add Emaclite ethernet driver
21235
21236 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
21237 Author: Michal Simek <monstr@monstr.eu>
21238 Date:   Fri Mar 28 11:04:01 2008 +0100
21239
21240     microblaze: ML401 and XUPV2P remove emac and emaclite reference
21241
21242     Signed-off-by: Michal Simek <monstr@monstr.eu>
21243
21244 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
21245 Author: Michal Simek <monstr@monstr.eu>
21246 Date:   Fri Mar 28 10:59:32 2008 +0100
21247
21248     microblaze: remove old setting for emac driver
21249
21250     Signed-off-by: Michal Simek <monstr@monstr.eu>
21251
21252 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
21253 Author: Michal Simek <monstr@monstr.eu>
21254 Date:   Fri Mar 28 10:58:15 2008 +0100
21255
21256     microblaze: Clean Makefile from ancient emac driver
21257
21258     Signed-off-by: Michal Simek <monstr@monstr.eu>
21259
21260 commit ab68f921d9c741830f721c3d879c13a0c5597183
21261 Author: Daniel Hellstrom <daniel@gaisler.com>
21262 Date:   Fri Mar 28 10:20:43 2008 +0100
21263
21264     SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
21265
21266     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21267
21268 commit 6ed8a43a19bb0275501bc286007daafa923552cf
21269 Author: Daniel Hellstrom <daniel@gaisler.com>
21270 Date:   Wed Mar 26 23:38:48 2008 +0100
21271
21272     SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
21273
21274     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21275
21276 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
21277 Author: Daniel Hellstrom <daniel@gaisler.com>
21278 Date:   Wed Mar 26 23:34:47 2008 +0100
21279
21280     SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
21281
21282     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21283
21284 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
21285 Author: Daniel Hellstrom <daniel@gaisler.com>
21286 Date:   Fri Mar 28 10:06:52 2008 +0100
21287
21288     SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
21289
21290     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21291
21292 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
21293 Author: Daniel Hellstrom <daniel@gaisler.com>
21294 Date:   Wed Mar 26 23:26:48 2008 +0100
21295
21296     SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
21297
21298     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21299
21300 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
21301 Author: Daniel Hellstrom <daniel@gaisler.com>
21302 Date:   Fri Mar 28 10:00:33 2008 +0100
21303
21304     SPARC: Added support for SPARC LEON2 SOC Processor.
21305
21306     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21307
21308 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
21309 Author: Daniel Hellstrom <daniel@gaisler.com>
21310 Date:   Wed Mar 26 23:00:38 2008 +0100
21311
21312     SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
21313
21314     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21315
21316 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
21317 Author: Daniel Hellstrom <daniel@gaisler.com>
21318 Date:   Wed Mar 26 22:51:29 2008 +0100
21319
21320     SPARC: Added support for SPARC LEON3 SOC processor.
21321
21322     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21323
21324 commit bf3d8b31169546fcddb4737391e1893fb12d033a
21325 Author: Daniel Hellstrom <daniel@gaisler.com>
21326 Date:   Fri Mar 28 08:29:26 2008 +0100
21327
21328     SPARC: added SPARC support for new uimage in common code.
21329
21330     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21331
21332 commit 00ab32c85405a4fe65fd4128243086210fc90a21
21333 Author: Daniel Hellstrom <daniel@gaisler.com>
21334 Date:   Wed Mar 26 22:36:03 2008 +0100
21335
21336     SPARC: added SPARC board information to the command bdinfo.
21337
21338     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21339
21340 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
21341 Author: Daniel Hellstrom <daniel@gaisler.com>
21342 Date:   Fri Mar 28 09:47:00 2008 +0100
21343
21344     SPARC: Added generic support for SPARC architecture.
21345
21346     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21347
21348 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
21349 Author: Stefan Roese <sr@denx.de>
21350 Date:   Thu Apr 3 14:50:34 2008 +0200
21351
21352     ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
21353
21354     This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
21355     has 2 RGMII instances and we need to configure the 2nd RGMII instance
21356     for the EMAC2+3 channels.
21357
21358     Signed-off-by: Stefan Roese <sr@denx.de>
21359
21360 commit c2a545ce33b26d80337f80b533828839249fb1c9
21361 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21362 Date:   Wed Apr 2 08:03:56 2008 +0200
21363
21364     MPC8xx: Fix libfdt support introduced in commit 77ff7b74
21365
21366     fdt.c: In function 'ft_cpu_setup':
21367     fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
21368     fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
21369     fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
21370     fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
21371
21372     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21373
21374 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
21375 Author: Andy Fleming <afleming@freescale.com>
21376 Date:   Mon Mar 31 20:45:56 2008 -0500
21377
21378     Fix fdt set command to conform to dts spec
21379
21380     The fdt set command was treating properties specified as <00> and <0011>
21381     as byte streams, rather than as an array of cells.  As we already have
21382     syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
21383     we should use the <> syntax to describe arrays of cells, which are always
21384     32-bits per element.  If we imagine this likely (IMHO) scenario:
21385
21386     > fdt set /ethernet-phy@1 reg <1>
21387
21388     With the old code, this would create a bad fdt, since the reg cell would be
21389     made to be one byte in length.  But the cell must be 4 bytes, so this would
21390     break mysteriously.
21391
21392     Also, the dts spec calls for constants inside the angle brackets (<>)
21393     to conform to C constant standards as they pertain to base.
21394     Take this scenario:
21395
21396     > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
21397
21398     The old fdt command would complain that it couldn't parse that.  Or, if you
21399     wanted to specify that a certain clock ran at 33 MHz, you'd be required to
21400     do this:
21401
21402     > fdt set /mydev clock <1f78a40>
21403
21404     Whereas the new code will accept decimal numbers.
21405
21406     While I was in there, I extended the fdt command parser to handle property
21407     strings which are split across multiple arguments:
21408
21409     > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
21410     > fdt p /ethernet@f00
21411     ethernet@f00 {
21412         interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
21413     };
21414
21415     Lastly, the fdt print code was rearranged slightly to print arrays of cells
21416     if the length of the property is a multiple of 4 bytes, and to not print
21417     leading zeros.
21418
21419     Signed-off-by: Andy Fleming <afleming@freescale.com>
21420
21421 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
21422 Author: Stefan Roese <sr@denx.de>
21423 Date:   Wed Apr 2 08:39:33 2008 +0200
21424
21425     ppc4xx: Canyonlands: Init SATA/PCIe port correctly
21426
21427     Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
21428     interface. This usage can be configured with the jumper J6. This patch
21429     correctly configures the SATA/PCIe PHY for SATA usage when this jumper
21430     is installed.
21431
21432     Signed-off-by: Stefan Roese <sr@denx.de>
21433
21434 commit 6fe2946f198481254a6ee9600d7456b8316a4083
21435 Author: Kim Phillips <kim.phillips@freescale.com>
21436 Date:   Fri Mar 28 17:37:49 2008 -0500
21437
21438     remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
21439
21440     finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
21441     "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
21442     started.
21443
21444     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21445
21446 commit b5873f1732b92a25690e1513b90dfb0d644f6697
21447 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21448 Date:   Tue Apr 1 07:30:51 2008 +0200
21449
21450     dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
21451
21452     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21453
21454 commit 2d934ea51f276522b532f870a820e844ff480b5b
21455 Author: Tor Krill <tor@excito.com>
21456 Date:   Fri Mar 28 15:29:45 2008 +0100
21457
21458     Add Vitesse 8601 support to TSEC driver
21459
21460     Add phy_info for Vitesse VSC8601.
21461     Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
21462
21463     Signed-off-by: Tor Krill <tor@excito.com>
21464     Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
21465     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21466
21467 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
21468 Author: Daniel Hellstrom <daniel@gaisler.com>
21469 Date:   Mon Mar 31 14:25:00 2008 +0000
21470
21471     SPARC: added SMC91111 driver in and out macros for LEON processors.
21472
21473     This patch makes SPARC/LEON processors able to read and write
21474     to the SMC91111 chip using the chip external I/O bus of the memory
21475     controller. This patchs defines the standard in and out macros
21476     expected by the SMC9111 driver.
21477
21478     To access that I/O bus one must set up the memory controller
21479     (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
21480     up this correctly when the other MCTRL parameters are set up. It
21481     can be set up from the board configuration header file.
21482
21483     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21484     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21485
21486 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
21487 Author: Stelian Pop <stelian@popies.net>
21488 Date:   Wed Mar 26 18:52:34 2008 +0100
21489
21490     Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
21491
21492     Signed-off-by: Stelian Pop <stelian@popies.net>
21493
21494 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
21495 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21496 Date:   Mon Mar 31 21:31:04 2008 +0200
21497
21498     AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
21499
21500     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21501
21502 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
21503 Author: Stelian Pop <stelian@popies.net>
21504 Date:   Wed Mar 26 18:52:33 2008 +0100
21505
21506     Add support for AT91SAM9260EK
21507
21508     Support for booting from internal DataFlash, external DataFlash card
21509     or NAND flash is available.
21510
21511     Signed-off-by: Stelian Pop <stelian@popies.net>
21512
21513 commit 1762f13b4aab88b685b1722f17dada247945624b
21514 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21515 Date:   Mon Mar 31 21:20:49 2008 +0200
21516
21517     AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
21518
21519     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21520
21521 commit 761712188b353494defb2b644491ff73d0daaa6f
21522 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21523 Date:   Mon Mar 31 21:12:17 2008 +0200
21524
21525     AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
21526
21527     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21528
21529 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
21530 Author: Stelian Pop <stelian@popies.net>
21531 Date:   Wed Mar 26 20:52:32 2008 +0100
21532
21533     Port AT91CAP9 to the new headers
21534
21535     Adapt the existing AT91CAP9 code to the new headers and APIs.
21536
21537     Signed-off-by: Stelian Pop <stelian@popies.net>
21538
21539 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
21540 Author: Stelian Pop <stelian@popies.net>
21541 Date:   Wed Mar 26 19:52:31 2008 +0100
21542
21543     Finish header files reworking
21544
21545     Replace AT91CAP9.h file with several splitted header files coming
21546     from the Linux kernel.
21547
21548     This is part 2 of the replacement: more header imports and edits.
21549
21550     Signed-off-by: Stelian Pop <stelian@popies.net>
21551
21552 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
21553 Author: Stelian Pop <stelian@popies.net>
21554 Date:   Wed Mar 26 19:52:30 2008 +0100
21555
21556     Import several header files from Linux
21557
21558     Replace AT91CAP9.h file with several splitted header files coming
21559     from the Linux kernel.
21560
21561     This is part 1 of the replacement: pristine header files import.
21562
21563     Signed-off-by: Stelian Pop <stelian@popies.net>
21564
21565 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
21566 Author: Stelian Pop <stelian@popies.net>
21567 Date:   Wed Mar 26 20:52:28 2008 +0100
21568
21569     Move at91cap9 specific files to at91sam9 directory
21570
21571     AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
21572     common infrastructure can be used. Let this infrastructure be
21573     named after the AT91SAM9 family, and move the existing AT91CAP9
21574     files to the new place.
21575
21576     Signed-off-by: Stelian Pop <stelian@popies.net>
21577
21578 commit 61106a565870ff503f92b251b94bd7afef889a04
21579 Author: Stelian Pop <stelian@popies.net>
21580 Date:   Wed Mar 26 21:52:27 2008 +0100
21581
21582     Use timer_init() instead of board supplied interrupt_init()
21583
21584     The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
21585     the board, so use timer_init() instead of interrupt_init().
21586
21587     Signed-off-by: Stelian Pop <stelian@popies.net>
21588
21589 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
21590 Author: Stelian Pop <stelian@popies.net>
21591 Date:   Wed Mar 26 21:52:36 2008 +0100
21592
21593     Cleanup DataFlash partition handling
21594
21595     DataFlash partition information has become a mess. This patch
21596     defines a single partition scheme for Atmel DataFlashes. This partition
21597     scheme will be used by all AT91CAP9 and AT91SAM9 boards.
21598
21599     Signed-off-by: Stelian Pop <stelian@popies.net>
21600
21601 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
21602 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21603 Date:   Fri Mar 28 08:47:45 2008 -0500
21604
21605     ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
21606
21607     When the version_string function in start.S is not 4-byte align,
21608     it will cause the compiler generates "unaligned opcodes detected
21609     in executable segment". This issue affects all ColdFire CPUs.
21610     By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
21611     it is not aligned.
21612
21613     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21614     Acked-by: John Rigby <jrigby@freescale.com>
21615
21616 commit bae61eefe15b4d454060a7140e49ae58322be803
21617 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21618 Date:   Tue Mar 25 15:41:15 2008 -0500
21619
21620     ColdFire: Add dspi and serial flash support for MCF5445x
21621
21622     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21623     Acked-by: John Rigby <jrigby@freescale.com>
21624
21625 commit 48ead7a7a922fceaf494e352abfab8216a41b417
21626 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21627 Date:   Tue Mar 18 17:37:01 2008 -0500
21628
21629     ColdFire: Remove R5200 board
21630
21631     This board never went into production
21632
21633     Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
21634     Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21635     Acked-by: John Rigby <jrigby@freescale.com>
21636
21637 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
21638 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
21639 Date:   Thu Jan 24 14:02:32 2008 -0600
21640
21641     ColdFire: Added M5275EVB support.
21642
21643     Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
21644     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21645     Acked-by: John Rigby <jrigby@freescale.com>
21646
21647 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
21648 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
21649 Date:   Mon Feb 4 15:38:20 2008 -0600
21650
21651     ColdFire: Added MCF5275 cpu support.
21652
21653     Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
21654     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21655     Acked-by: John Rigby <jrigby@freescale.com>
21656
21657 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
21658 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21659 Date:   Mon Mar 17 12:14:11 2008 -0500
21660
21661     ColdFire: Define bootdelay in configuration file for M52277EVB
21662
21663     Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
21664     Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21665     Acked-by: John Rigby <jrigby@freescale.com>
21666
21667 commit 77878f16cedee17161ff2336990970fffc6cea35
21668 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21669 Date:   Mon Mar 17 12:09:07 2008 -0500
21670
21671     ColdFire: Fix second memory Chipselect for M5475EVB
21672
21673     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21674     Acked-by: John Rigby <jrigby@freescale.com>
21675
21676 commit 43d60642395a550956cb21d287c8cfa563913d28
21677 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21678 Date:   Thu Mar 13 14:26:32 2008 -0500
21679
21680     ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
21681
21682     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21683     Acked-by: John Rigby <jrigby@freescale.com>
21684
21685 commit eb14ebe813a0cb5d47905228da446a5ad692473b
21686 Author: Larry Johnson <lrj@acm.org>
21687 Date:   Sun Mar 30 20:33:04 2008 -0500
21688
21689     ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
21690
21691     Signed-off-by: Larry Johnson <lrj@acm.org>
21692
21693 commit 02e3892021112f21067d9ed1d04ae4182725ba52
21694 Author: Stefan Roese <sr@denx.de>
21695 Date:   Mon Mar 31 12:20:48 2008 +0200
21696
21697     ppc4xx: Small whitespace fix of esd patches
21698
21699     Signed-off-by: Stefan Roese <sr@denx.de>
21700
21701 commit 034394abb524785047c815f00dde8cdbdc1593c5
21702 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21703 Date:   Sun Mar 30 18:52:44 2008 +0200
21704
21705     ppc4xx: Cleanup PMC440 board support
21706
21707     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21708
21709 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
21710 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21711 Date:   Sun Mar 30 18:52:06 2008 +0200
21712
21713     ppc4xx: Add ptm configuration variables for PMC440
21714
21715     Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
21716     environment variables.
21717
21718     Cleanup pci_target_init.
21719
21720     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21721
21722 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
21723 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21724 Date:   Sun Mar 30 18:01:15 2008 +0200
21725
21726     ppc4xx: Minor updates for DU440 boards
21727
21728     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21729
21730 commit d5bffeb868d6b4d462f558dac43011027b6644b7
21731 Author: Mike Frysinger <vapier@gentoo.org>
21732 Date:   Tue Feb 19 00:54:20 2008 -0500
21733
21734     Blackfin: cleanup and overhaul common board init functions
21735
21736     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21737
21738 commit b86b3416f874358acaf07519e7620cdb2145f75b
21739 Author: Mike Frysinger <vapier@gentoo.org>
21740 Date:   Tue Feb 19 00:50:58 2008 -0500
21741
21742     Blackfin: cleanup lib_blackfin/cache.c
21743
21744     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21745
21746 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
21747 Author: Mike Frysinger <vapier@gentoo.org>
21748 Date:   Sun Mar 30 15:46:13 2008 -0400
21749
21750     Blackfin: unify cpu and boot modes
21751
21752     All of the duplicated code for Blackfin processors and boot modes have been
21753     unified.  After all, the core is the same for all processors, just the
21754     peripheral set differs (which gets handled in the drivers).
21755
21756     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21757
21758 commit 880cc4381ea8360248cddcdf87a64566745a5724
21759 Author: Stelian Pop <stelian@popies.net>
21760 Date:   Wed Mar 26 22:52:35 2008 +0100
21761
21762     Fix CFG_NO_FLASH compilation.
21763
21764     Many Atmel boards have no "real" (NOR) flash on board, and rely only
21765     on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
21766     be present in a board configuration file, while still enabling flash
21767     commands like 'flinfo', 'protect', etc.
21768
21769     Signed-off-by: Stelian Pop <stelian@popies.net>
21770
21771 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
21772 Author: Mike Frysinger <vapier@gentoo.org>
21773 Date:   Tue Feb 19 00:58:13 2008 -0500
21774
21775     Blackfin: BF537-stamp: cleanup spi flash driver
21776
21777     This punts the old spi flash driver for a new/generalized one until the
21778     common one can be integrated.
21779
21780     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21781
21782 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
21783 Author: Ben Warren <biggerbadderben@gmail.com>
21784 Date:   Sun Mar 30 11:34:34 2008 -0400
21785
21786     Fix macro typo in common/cmd_mii.c
21787
21788     This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206.  I
21789     actually applied the wrong patch.
21790
21791     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21792
21793 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
21794 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21795 Date:   Sun Mar 30 16:39:53 2008 +0200
21796
21797     use correct at91rm9200 register name in m501sk board
21798
21799     This fixes a naming bug for at91rm9200 lowlevel init code:
21800     NOR boot flash is on chipselect 0, not chipselect 2.  This
21801     makes code use the register name from chip datasheets.
21802
21803     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21804
21805 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
21806 Author: David Brownell <david-b@pacbell.net>
21807 Date:   Fri Jan 18 12:55:00 2008 -0800
21808
21809     use correct at91rm9200 register name
21810
21811     This fixes a naming bug for at91rm9200 lowlevel init code:
21812     NOR boot flash is on chipselect 0, not chipselect 2.  This
21813     makes code use the register name from chip datasheets.
21814
21815     Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
21816
21817 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
21818 Author: David Brownell <david-b@pacbell.net>
21819 Date:   Fri Jan 18 12:45:45 2008 -0800
21820
21821     add missing ARM boards to MAKEALL
21822
21823     Add some missing ARM boards to MAKEALL.  These build correctly,
21824     unlike several of the boards already listed.
21825
21826     Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
21827
21828 commit 066bebd6353e33af3adefc3404560871699e9961
21829 Author: Peter Pearse <peter.pearse@arm.com>
21830 Date:   Sun Mar 30 11:34:09 2008 +0100
21831
21832     Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
21833     to prevent compilation error.
21834
21835     Signed-off-by: Peter Pearse <peter.pearse@arm.com>
21836
21837 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
21838 Author: Guennadi Liakhovetski <[lg@denx.de]>
21839 Date:   Sun Mar 30 11:32:30 2008 +0100
21840
21841     Support for the MX31ADS evaluation board from Freescale
21842
21843     This patch adds support for the MX31ADS evaluation board from Freescale,
21844     initialization code is copied from RedBoot sources, also provided by Freescale.
21845
21846     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21847
21848 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
21849 Author: Sascha Hauer <s.hauer@pengutronix.de>
21850 Date:   Sun Mar 30 11:32:27 2008 +0100
21851
21852     Phytec Phycore-i.MX31 support
21853
21854     This patch adds support for the Phytec Phycore-i.MX31 board
21855
21856     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
21857     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21858
21859 commit a147e56f03871bba4f05058d5e04ce7deb010b04
21860 Author: Sascha Hauer <s.hauer@pengutronix.de>
21861 Date:   Sun Mar 30 11:32:24 2008 +0100
21862
21863     mx31 litekit support
21864
21865     This patch adds support for the mx31 litekit board
21866
21867     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
21868     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21869
21870 commit d6674e0e2a6a1f033945f78838566210d3f28c95
21871 Author: Sascha Hauer <s.hauer@pengutronix.de>
21872 Date:   Sun Mar 30 11:32:21 2008 +0100
21873
21874     add SMSC LAN9x1x Network driver
21875
21876     This patch adds a driver for the following smsc network controllers:
21877     LAN9115
21878     LAN9116
21879     LAN9117
21880     LAN9215
21881     LAN9216
21882     LAN9217
21883
21884     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
21885     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21886
21887 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
21888 Author: Sascha Hauer <s.hauer@pengutronix.de>
21889 Date:   Sun Mar 30 11:32:16 2008 +0100
21890
21891     add an i2c driver for mx31
21892
21893     This patch adds an i2c driver for Freescale i.MX processors
21894
21895     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
21896     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21897
21898 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
21899 Author: Sascha Hauer <s.hauer@pengutronix.de>
21900 Date:   Sun Mar 30 11:30:43 2008 +0100
21901
21902     core support for Freescale mx31
21903
21904     This patch adds the core support for Freescale mx31
21905
21906     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
21907     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21908
21909 commit 8bf69d81782619187933a605f1a95ee1d069478d
21910 Author: Sascha Hauer <s.hauer@pengutronix.de>
21911 Date:   Sun Mar 30 11:28:46 2008 +0100
21912
21913     Separate omap24xx specific code from arm1136
21914
21915     Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
21916
21917     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
21918     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21919
21920 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
21921 Author: Peter Pearse <peter.pearse@arm.com>
21922 Date:   Sun Mar 30 11:23:05 2008 +0100
21923
21924     Add pmdra into MAKEALL
21925
21926     Signed-off-by: Peter Pearse <peter.pearse@arm.com>
21927
21928 commit a574a73852a527779234e73e17e7597fd8128882
21929 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
21930 Date:   Sun Mar 30 11:21:58 2008 +0100
21931
21932     Adds support for the Prodrive PMDRA board, based on a DM6441
21933
21934     Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
21935
21936 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
21937 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
21938 Date:   Sun Mar 30 11:11:34 2008 +0100
21939
21940     Removes all board specific code from the arch. part for DM644x (DaVinci) boards
21941
21942     Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
21943
21944 commit 1704dc20917b4f71e373e2c888497ee666d40380
21945 Author: Dirk Behme <dirk.behme@gmail.com>
21946 Date:   Sun Mar 30 11:09:01 2008 +0100
21947
21948     - Remove *_masked() functions as noted by Wolfgang
21949     - Adapt register naming to recent TI spec (sprue26, March 2007)
21950     - Fix reset_timer() handling
21951     - As reported by Pieter [1] the overflow fix introduced a
21952     delay of factor 16 (e.g 2 seconds became 32). While the
21953     overflow fix is basically okay, it missed to divide udelay by
21954     16, too. Fix this.
21955     [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
21956     - Remove software division of timer count value (DIV(x)
21957     macro) and do it in hardware (TIM_CLK_DIV).
21958     Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
21959     and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
21960     the hints & testing!
21961
21962     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
21963
21964     Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
21965
21966 commit ac3315c26e143c31680750c9c13f027efbcc887e
21967 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21968 Date:   Thu Mar 6 16:45:44 2008 +0100
21969
21970     new PHY @ e1000 - 2nd try
21971
21972     Add 82541ER device with latest integrated IGP2 PHY.
21973     Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
21974
21975     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21976     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21977
21978 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
21979 Author: Daniel Hellstrom <daniel@gaisler.com>
21980 Date:   Fri Mar 28 20:22:53 2008 +0100
21981
21982     SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
21983
21984     GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
21985     a debug link (EDCL). The GRETH core is documented in GRIP.pdf
21986     available at www.gaisler.com.
21987
21988     If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
21989     offloading etc.) can be determined by a bit in the control register.
21990     The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
21991
21992     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
21993     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21994
21995 commit 233a8bcd94997f3f345833a3b82e836222f2a206
21996 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
21997 Date:   Mon Mar 17 17:08:22 2008 -0500
21998
21999     Add CONFIG_MII_INIT in cmd_mii.c
22000
22001     Provide common configuration in do_mii() to execute mii_init()
22002     for all cpu architectures
22003
22004     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22005     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22006
22007 commit f605479de2deb11e834f31dfdb0af107c86aced6
22008 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
22009 Date:   Mon Mar 17 17:08:16 2008 -0500
22010
22011     ColdFire: Fix FEC transmit issue for MCF5275
22012
22013     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22014     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22015
22016 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
22017 Author: Aras Vaichas <arasv@magtech.com.au>
22018 Date:   Wed Mar 26 09:43:57 2008 +1100
22019
22020     DHCP request fix for Windows Server 2003
22021
22022     Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
22023     delay before sending "DHCP Request" in net/bootp.c. Required to overcome
22024     interoperability problems with Windows Server 200x DHCP server when U-Boot
22025     client responds too fast for server to handle.
22026
22027     Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
22028     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22029
22030 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
22031 Author: Daniel Hellstrom <daniel@gaisler.com>
22032 Date:   Fri Mar 28 20:40:19 2008 +0100
22033
22034     MTD/CFI: flash_read64 is defined a weak function (for SPARC)
22035
22036     SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
22037     SPARC CPUs implement flash_read64 which calls __raw_readq.
22038
22039     For current SPARC architectures (LEON2 and LEON3) each read from the
22040     FLASH must lead to a cache miss. This is because FLASH can not be set
22041     non-cacheable since program code resides there, and alternatively disabling
22042     cache is poor from performance view, or doing a cache flush between each
22043     read is even poorer.
22044
22045     Forcing a cache miss on a SPARC is done by a special instruction "lda" -
22046     load alternative space, the alternative space number (ASI) is processor
22047     implementation spcific and can be found by including <asm/processor.h>.
22048
22049     Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
22050
22051 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
22052 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
22053 Date:   Fri Mar 28 15:41:25 2008 +0100
22054
22055     Make MPC83xx one step closer to full relocation.
22056
22057     Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
22058     and use GOT relative reference.
22059
22060     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
22061     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22062
22063 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
22064 Author: Michael Barkowski <michael.barkowski@freescale.com>
22065 Date:   Thu Mar 27 14:34:43 2008 -0400
22066
22067     mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
22068
22069     This patch fixes eeprom page size so that you can now write more than
22070     64 bytes at a time.
22071
22072     It also makes the board take MAC addresses, if found, from EEPROM.
22073
22074     User should place up to 4 addresses at offset 0x7f00, for
22075     eth{,1,2,3}addr.  Any unused addresses should be zero.  This group of
22076     four six-byte values should have it's CRC at the end.  crc32 and
22077     eeprom commands can be used to accomplish this.
22078
22079     If CRC fails, MAC addresses come from the environment.  If CRC
22080     succeeds, the environment is overwritten at startup.
22081
22082     Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
22083     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22084
22085 commit 8f325cff31f6e745e6540014b131b9a97f61944c
22086 Author: Michael Barkowski <michael.barkowski@freescale.com>
22087 Date:   Fri Mar 28 15:15:38 2008 -0400
22088
22089     mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
22090
22091     Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
22092     controller on the PCI bus in Linux on the MPC8323ERDB.
22093
22094     This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
22095     config file.
22096
22097     Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
22098     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22099
22100 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
22101 Author: Kim Phillips <kim.phillips@freescale.com>
22102 Date:   Fri Mar 28 10:19:07 2008 -0500
22103
22104     mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
22105
22106     in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
22107     85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
22108     and processor ID display.  Add REVID_{MAJ,MIN}OR macros to make
22109     REVID dependent code simpler.  Also added PARTID_NO_E and IS_E_PROCESSOR
22110     convenience macros.
22111
22112     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22113
22114 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
22115 Author: Kim Phillips <kim.phillips@freescale.com>
22116 Date:   Fri Mar 28 10:18:53 2008 -0500
22117
22118     mpc83xx: display ddr frequency in board_add_ram_info banner
22119
22120     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22121
22122 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
22123 Author: Kim Phillips <kim.phillips@freescale.com>
22124 Date:   Fri Mar 28 10:18:40 2008 -0500
22125
22126     mpc83xx: unreinvent mem_clk
22127
22128     delete ddr_clk and use mem_clk instead.  Rename other ddr_*_clk to
22129     mem_*_clk for consistency's sake.
22130
22131     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22132
22133 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
22134 Author: Kim Phillips <kim.phillips@freescale.com>
22135 Date:   Fri Mar 28 14:31:23 2008 -0500
22136
22137     mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
22138
22139     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22140
22141 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
22142 Author: Dave Liu <r63238@freescale.com>
22143 Date:   Wed Mar 26 22:57:19 2008 +0800
22144
22145     mpc83xx: enable the SATA interface on mpc837xemds board
22146
22147     Enable the first two SATA interfaces on MPC837xEMDS board,
22148     The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
22149
22150     Signed-off-by: Dave Liu <daveliu@freescale.com>
22151     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22152
22153 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
22154 Author: Dave Liu <r63238@freescale.com>
22155 Date:   Wed Mar 26 22:56:36 2008 +0800
22156
22157     mpc83xx: initialize serdes for MPC837xEMDS boards
22158
22159     This patch is stolen from Anton Vorontsov's patch
22160     for mpc837xerdb boards.
22161
22162     The reference clk and xcorevdd voltage of serdes1/2
22163     is same between mpc837xemds and mpc837xerdb.
22164
22165     8377E: LYNX1- 2 SATA        LYNX2- 2 PCIE
22166     8378E: LYNX1- 2 SGMII       LYNX2- 2 PCIE
22167     8379E: LYNX1- 2 SATA        LYNX2- 2 SATA
22168
22169     Signed-off-by: Dave Liu <daveliu@freescale.com>
22170     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22171
22172 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
22173 Author: Stefan Roese <sr@denx.de>
22174 Date:   Fri Mar 28 14:09:04 2008 +0100
22175
22176     ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
22177
22178     Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
22179     interface. This usage can be configured with the jumper J6. This patch
22180     displays the current configuration upon bootup and changes the PCIe
22181     init loop, to only initialize the availabel PCIe slots.
22182
22183     Signed-off-by: Stefan Roese <sr@denx.de>
22184
22185 commit 90447ecbbac8572457b6d8903073ac3f120995ba
22186 Author: Tor Krill <tor@excito.com>
22187 Date:   Fri Mar 28 11:29:10 2008 +0100
22188
22189     MTD/CFI: Add support for 16bit legacy AMD flash
22190
22191     Add entry for 512Kx16 AMD flash to jedec_table.
22192     Read out 16bit device id if chipwidth is 16bit.
22193     Fixed coding style after Stefans feedback
22194
22195     Signed-off-by: Tor Krill <tor@excito.com>
22196
22197 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
22198 Author: Stefan Roese <sr@denx.de>
22199 Date:   Fri Mar 28 11:02:53 2008 +0100
22200
22201     ppc: Small change to CFG_MEM_TOP_HIDE description
22202
22203     Signed-off-by: Stefan Roese <sr@denx.de>
22204
22205 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
22206 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22207 Date:   Thu Mar 27 15:44:12 2008 +0900
22208
22209     sh: Add support stat structure and stat.h
22210
22211     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22212
22213 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
22214 Author: Mark Jonas <toertel@gmail.com>
22215 Date:   Sat Mar 22 19:27:52 2008 +0100
22216
22217     sh: Removed warning when compiling drivers/serial/serial_sh.c.
22218
22219     Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
22220     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22221
22222 commit f309fa38929ffba71230c02330ffa42f4bba6333
22223 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22224 Date:   Wed Mar 12 18:02:57 2008 +0900
22225
22226     sh: Remove disable_ctrlc function from R7780MP
22227
22228     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22229
22230 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
22231 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22232 Date:   Wed Mar 12 17:55:15 2008 +0900
22233
22234     sh: Add maintainer of R7780MP to MAINTAINER file
22235
22236     Update MAINTAINER entry for R7780MP. And fix maintainer's name.
22237
22238     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22239
22240 commit f5e2466f7baa887a7df0c536333eea8231333497
22241 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22242 Date:   Tue Mar 25 17:11:24 2008 +0900
22243
22244     sh: Add support Renesas Solutions R2D plus board
22245
22246     R2D plus is SH reference board used with SH7751R.
22247     This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
22248     one PCI bus, VGA, and two Ethernet controller.
22249
22250     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22251
22252 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
22253 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22254 Date:   Wed Mar 12 12:15:29 2008 +0900
22255
22256     sh: Add support SH4 cache control
22257
22258     Add support SH4 cache control and flash_cache function
22259
22260     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22261
22262 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
22263 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22264 Date:   Mon Mar 24 01:53:01 2008 +0900
22265
22266     sh: Add support PCI host driver for SH7751/SH7751R
22267
22268     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22269
22270 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
22271 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22272 Date:   Mon Mar 24 02:11:26 2008 +0900
22273
22274     sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
22275
22276     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22277
22278 commit 566933278101c144d75361ea682678a326c1290d
22279 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22280 Date:   Wed Mar 12 12:10:28 2008 +0900
22281
22282     sh: Add support SuperH SH7751/SH7751R
22283
22284     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22285
22286 commit 3313e0e26224fc9a0c445124f3455058c696df84
22287 Author: Mark Jonas <toertel@gmail.com>
22288 Date:   Mon Mar 10 11:37:10 2008 +0100
22289
22290     sh: Added support for SH7720 based board MPR2.
22291
22292     Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
22293     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22294
22295 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
22296 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22297 Date:   Thu Mar 6 14:05:53 2008 +0900
22298
22299     sh: Fix receive FIFO level register of SH4A
22300
22301     Receive FIFO level register is different in SH4A.
22302     Because register is different, cannot occasionally receive data.
22303
22304     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22305
22306 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
22307 Author: Yusuke Goda <goda.yusuke@renesas.com>
22308 Date:   Tue Mar 11 12:55:12 2008 +0900
22309
22310     sh: Add support Renesas Solutions R7780MP
22311
22312     Renesas Solutions R7780MP is a reference board on SH7780.
22313     This board has serial, 10/100 base Ethernet deivice, CF slot
22314     and VGA devices. This board can set extension board.
22315     Extension board has 10/100/1000 base Ethernet device, PCI slot,
22316     S-ATA, iDVR slot.
22317
22318     Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
22319     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22320
22321 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
22322 Author: Yusuke Goda <goda.yusuke@renesas.com>
22323 Date:   Wed Mar 5 14:30:02 2008 +0900
22324
22325     sh: Add support PCI of SuperH and SH7780
22326
22327     This patch add support PCI of SuperH base code and SH7780 specific code.
22328
22329     Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
22330     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22331
22332 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
22333 Author: Yusuke Goda <goda.yusuke@renesas.com>
22334 Date:   Wed Mar 5 14:23:26 2008 +0900
22335
22336     sh: Add support SH7780
22337
22338     SH7780 is CPU of Renesas Technology.
22339     This CPU has
22340      - CPU clock 400MHz
22341      - PCI support
22342      - DDR-SDRAM controller
22343      - etc ...
22344
22345     Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
22346     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22347
22348 commit c2042f5952a686c414031309b8f244513bf578f0
22349 Author: goda.yusuke <goda.yusuke@renesas.com>
22350 Date:   Fri Jan 25 20:46:36 2008 +0900
22351
22352     sh: Add support Renesas Solutions Migo-R board
22353
22354     Migo-R is a board based on SH7722 and has may devices.
22355     In this patch, supported SCIF, NOR flash and Ethernet.
22356
22357     Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
22358     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22359
22360 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
22361 Author: Bartlomiej Sieka <tur@semihalf.com>
22362 Date:   Thu Mar 27 15:06:40 2008 +0100
22363
22364     Fix host tool build breakage, take two
22365
22366     Revert commit 87c8431f and fix build breakage so that the build continues
22367     to work on FC systems.
22368
22369     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
22370
22371 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
22372 Author: Stefan Roese <sr@denx.de>
22373 Date:   Wed Mar 19 09:36:47 2008 +0100
22374
22375     ppc4xx: Enable ECC on LWMON5
22376
22377     Since all ECC related problems seem to be resolved on LWMON5, this patch
22378     now enables ECC support.
22379
22380     We have to write the ECC bytes by zeroing and flushing in smaller
22381     steps, since the whole 256MByte takes too long for the external
22382     watchdog.
22383
22384     Signed-off-by: Stefan Roese <sr@denx.de>
22385
22386 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
22387 Author: Larry Johnson <lrj@acm.org>
22388 Date:   Mon Mar 17 11:10:35 2008 -0500
22389
22390     ppc4xx: Updates to Korat-specific code
22391
22392     This patch contains updates for changes for the Korat PPC440EPx board.
22393     These changes include:
22394
22395     (1) Support for "permanent" and "upgradable" copies of U-Boot, as
22396     described in the new "doc/README.korat" file;
22397
22398     (2) a new memory map for the registers in the board's CPLD;
22399
22400     (3) a revised format for manufacturer's data in serial EEPROM; and
22401
22402     (4) changes to track updates to U-Boot for the Sequoia board.
22403
22404     Signed-off-by: Larry Johnson <lrj@acm.org>
22405
22406 commit f766cdf89b3a2a7634b8c5869f606150e332036c
22407 Author: Markus Brunner <super.firetwister@gmail.com>
22408 Date:   Thu Mar 27 10:46:25 2008 +0100
22409
22410     ppc4xx: PPC405EP Set EMAC noise filter bits
22411
22412     This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
22413     which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
22414     disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
22415
22416     Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
22417     Signed-off-by: Stefan Roese <sr@denx.de>
22418
22419 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
22420 Author: Mike Nuss <mike@terascala.com>
22421 Date:   Wed Feb 20 11:54:20 2008 -0500
22422
22423     ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
22424
22425     On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
22426     after startup to change the speed of the clocks. This patch adds the
22427     option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
22428     initialization code will reconfigure the PLL to run the system with a CPU
22429     frequency of 667MHz and PLB frequency of 166MHz, without the need for an
22430     external EEPROM.
22431
22432     Signed-off-by: Mike Nuss <mike@terascala.com>
22433     Acked-by: Stefan Roese <sr@denx.de>
22434
22435 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
22436 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22437 Date:   Thu Mar 27 09:12:40 2008 +0100
22438
22439     new-image: Fix host tool build breakage
22440
22441     Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22442
22443 commit 6fb4b640562a10daff0dbe537638d511b5b48650
22444 Author: Stefan Roese <sr@denx.de>
22445 Date:   Thu Mar 27 10:24:03 2008 +0100
22446
22447     ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
22448
22449     Signed-off-by: Stefan Roese <sr@denx.de>
22450
22451 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
22452 Author: Stefan Roese <sr@denx.de>
22453 Date:   Wed Mar 19 10:23:43 2008 +0100
22454
22455     ppc4xx: Add fdt support to Prodrive alpr
22456
22457     Since this board will probably be ported to arch/powerpc in the
22458     near future, we add device tree support now. This way we are
22459     "ready" for arch/powerpc from now on.
22460
22461     Signed-off-by: Stefan Roese <sr@denx.de>
22462
22463 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
22464 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
22465 Date:   Mon Mar 17 09:27:56 2008 +0100
22466
22467     ppc4xx: Enable cache support on the ALPR board
22468
22469     Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
22470
22471 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
22472 Author: Stefan Roese <sr@denx.de>
22473 Date:   Wed Mar 26 10:14:11 2008 +0100
22474
22475     ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
22476
22477     If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
22478     memory area will get subtracted from the top (end) of ram and won't get
22479     "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
22480     should gets passed the now "corrected" memory size and won't touch it
22481     either. This should work for arch/ppc and arch/powerpc. Only Linux board
22482     ports in arch/powerpc with bootwrapper support, which recalculate the
22483     memory size from the SDRAM controller setup, will have to get fixed
22484     in Linux additionally.
22485
22486     This patch enables this config option on some PPC440EPx boards as a workaround
22487     for the CHIP 11 errata. Here the description from the AMCC documentation:
22488
22489     CHIP_11: End of memory range area restricted access.
22490     Category: 3
22491
22492     Overview:
22493     The 440EPx DDR controller does not acknowledge any
22494     transaction which is determined to be crossing over the
22495     end-of-memory-range boundary, even if the starting address is
22496     within valid memory space. Any such transaction from any PLB4
22497     master will result in a PLB time-out on PLB4 bus.
22498
22499     Impact:
22500     In case of such misaligned bursts, PLB4 masters will not
22501     retrieve any data at all, just the available data up to the
22502     end of memory, especially the 440 CPU. For example, if a CPU
22503     instruction required an operand located in memory within the
22504     last 7 words of memory, the DCU master would burst read 8
22505     words to update the data cache and cross over the
22506     end-of-memory-range boundary. Such a DCU read would not be
22507     answered by the DDR controller, resulting in a PLB4 time-out
22508     and ultimately in a Machine Check interrupt. The data would
22509     be inaccessible to the CPU.
22510
22511     Workaround:
22512     Forbid any application to access the last 256 bytes of DDR
22513     memory. For example, make your operating system believe that
22514     the last 256 bytes of DDR memory are absent. AMCC has a patch
22515     that does this, available for Linux.
22516
22517     This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
22518     lwmon5, korat, sequoia
22519
22520     The other remaining 440EPx board were intentionally not included
22521     since it is not clear to me, if they use the end of ram for some
22522     other purpose. This is unclear, since these boards have CONFIG_PRAM
22523     defined and even comments like this:
22524
22525     PMC440.h:
22526     /* esd expects pram at end of physical memory.
22527      * So no logbuffer at the moment.
22528      */
22529
22530     It is strongly recommended to not use the last 256 bytes on those
22531     boards too. Patches from the board maintainers are welcome.
22532
22533     Signed-off-by: Stefan Roese <sr@denx.de>
22534
22535 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
22536 Author: Stefan Roese <sr@denx.de>
22537 Date:   Thu Mar 27 10:09:05 2008 +0100
22538
22539     ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
22540
22541     Signed-off-by: Stefan Roese <sr@denx.de>
22542
22543 commit d56a3ce179688cde61073a3690e21703d68fafd7
22544 Author: Stefan Roese <sr@denx.de>
22545 Date:   Tue Mar 25 17:51:13 2008 +0100
22546
22547     ppc4xx: Correctly pass phyiscal FLASH base address into dtb
22548
22549     The routine ft_board_setup() configures the EBC NOR mappings for the
22550     Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
22551     0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
22552     problem, we need to pass the corrected address here too.
22553
22554     Signed-off-by: Stefan Roese <sr@denx.de>
22555
22556 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
22557 Author: Stefan Roese <sr@denx.de>
22558 Date:   Wed Mar 19 16:35:12 2008 +0100
22559
22560     ppc4xx: Fix compilation warning in 4xx_enet.c
22561
22562     Signed-off-by: Stefan Roese <sr@denx.de>
22563
22564 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
22565 Author: Stefan Roese <sr@denx.de>
22566 Date:   Wed Mar 19 16:20:49 2008 +0100
22567
22568     ppc4xx: Add AMCC Glacier 406GT eval board support
22569
22570     This patch adds support for the AMCC Glacier 460GT eval board.
22571     The main difference to the Canyonlands board are listed here:
22572
22573     - 4 ethernet ports instead of 2
22574     - no SATA port
22575     - no USB port
22576
22577     Currently EMAC2+3 are not working. This will be fixed in a later
22578     release.
22579
22580     Signed-off-by: Stefan Roese <sr@denx.de>
22581
22582 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
22583 Author: Stefan Roese <sr@denx.de>
22584 Date:   Thu Mar 27 08:47:26 2008 +0100
22585
22586     ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
22587
22588     Signed-off-by: Stefan Roese <sr@denx.de>
22589
22590 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
22591 Author: Anatolij Gustschin <agust@denx.de>
22592 Date:   Wed Mar 26 21:05:43 2008 +0100
22593
22594     Fix out of tree building issue
22595
22596     Currently U-Boot building in some external directory
22597     doesn't work. This patch tries to fix the problem.
22598
22599     Signed-off-by: Anatolij Gustschin <agust@denx.de>
22600
22601 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
22602 Author: Anatolij Gustschin <agust@denx.de>
22603 Date:   Wed Mar 26 18:13:33 2008 +0100
22604
22605     README: update documentation (availability, links, etc.)
22606
22607     Fix typo in README
22608
22609     Signed-off-by: Anatolij Gustschin <agust@denx.de>
22610
22611 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
22612 Author: Anatolij Gustschin <agust@denx.de>
22613 Date:   Wed Mar 26 17:47:44 2008 +0100
22614
22615     Fix compilation error in cmd_usb.c
22616
22617     This patch fixes compilation error
22618     cmd_usb.c: In function 'do_usb':
22619     cmd_usb.c:552: error: void value not ignored as it ought to be
22620
22621     Signed-off-by: Anatolij Gustschin <agust@denx.de>
22622
22623 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
22624 Author: Timur Tabi <timur@freescale.com>
22625 Date:   Fri Mar 14 17:45:29 2008 -0500
22626
22627     Add support for setting the I2C bus speed in fsl_i2c.c
22628
22629     Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
22630     the I2C bus speed.  Current 8[356]xx boards define the CFG_I2C_SPEED macro,
22631     but fsl_i2c.c ignores it and uses conservative value when programming the
22632     I2C bus speed.
22633
22634     Signed-off-by: Timur Tabi <timur@freescale.com>
22635     Acked-by: Andy Fleming <afleming@freescale.com>
22636
22637 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
22638 Author: Wolfgang Denk <wd@denx.de>
22639 Date:   Thu Mar 27 00:03:57 2008 +0100
22640
22641     Coding style cleanup, update CHANGELOG
22642
22643     Signed-off-by: Wolfgang Denk <wd@denx.de>
22644
22645 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
22646 Author: Dave Liu <r63238@freescale.com>
22647 Date:   Wed Mar 26 22:55:32 2008 +0800
22648
22649     drivers: add the support for Freescale SATA controller
22650
22651     Add the Freescale on-chip SATA controller driver to u-boot,
22652     The SATA controller is used on the 837x and 8315 targets,
22653     The driver can be used to load kernel, fs and dtb.
22654
22655     The features list:
22656     - 1.5/3 Gbps link speed
22657     - LBA48, LBA28 support
22658     - DMA and FPDMA support
22659     - Two ports support
22660
22661     Signed-off-by: Dave Liu <daveliu@freescale.com>
22662
22663 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
22664 Author: Dave Liu <r63238@freescale.com>
22665 Date:   Wed Mar 26 22:54:44 2008 +0800
22666
22667     ata: add the readme for SATA command line
22668
22669     Signed-off-by: Dave Liu <daveliu@freescale.com>
22670
22671 commit cd54081cd479e542fc399b8a40651ff11a1ad849
22672 Author: Dave Liu <r63238@freescale.com>
22673 Date:   Wed Mar 26 22:53:24 2008 +0800
22674
22675     ata: enable the sata initialize on boot up
22676
22677     Signed-off-by: Dave Liu <daveliu@freescale.com>
22678
22679 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
22680 Author: Dave Liu <r63238@freescale.com>
22681 Date:   Wed Mar 26 22:52:36 2008 +0800
22682
22683     ata: add the fis struct for SATA
22684
22685     Signed-off-by: Dave Liu <daveliu@freescale.com>
22686
22687 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
22688 Author: Dave Liu <r63238@freescale.com>
22689 Date:   Wed Mar 26 22:51:44 2008 +0800
22690
22691     ata: add the libata support
22692
22693     add simple libata support in u-boot
22694
22695     Signed-off-by: Dave Liu <daveliu@freescale.com>
22696
22697 commit 8e9bb43429e50df55fa41932cbe65841ff579220
22698 Author: Dave Liu <r63238@freescale.com>
22699 Date:   Wed Mar 26 22:50:45 2008 +0800
22700
22701     ata: make the ata_piix driver using new SATA framework
22702
22703     original ata_piix driver is using IDE framework, not real
22704     SATA framework. For now, the ata_piix driver is only used
22705     by x86 sc520_cdp board. This patch makes the ata_piix driver
22706     use the new SATA framework, so
22707
22708     - remove the duplicated command stuff
22709     - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
22710     - add the CONFIG_CMD_SATA define to sc520_cdp.h
22711
22712     Signed-off-by: Dave Liu <daveliu@freescale.com>
22713
22714 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
22715 Author: Dave Liu <r63238@freescale.com>
22716 Date:   Wed Mar 26 22:49:44 2008 +0800
22717
22718     ata: add the support for SATA framework
22719
22720     - add the SATA framework
22721     - add the SATA command line
22722
22723     Signed-off-by: Dave Liu <daveliu@freescale.com>
22724
22725 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
22726 Author: Dave Liu <r63238@freescale.com>
22727 Date:   Wed Mar 26 22:48:18 2008 +0800
22728
22729     ata: merge the header of ata_piix driver
22730
22731     move the sata.h from include/ to drivers/block/ata_piix.h
22732
22733     Signed-off-by: Dave Liu <daveliu@freescale.com>
22734
22735 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
22736 Author: Dave Liu <r63238@freescale.com>
22737 Date:   Wed Mar 26 22:47:06 2008 +0800
22738
22739     ata: merge the ata_piix driver
22740
22741     move the cmd_sata.c from common/ to drivers/ata_piix.c,
22742     the cmd_sata.c have some part of ata_piix controller drivers.
22743     consolidate the driver to have better framework.
22744
22745     Signed-off-by: Dave Liu <daveliu@freescale.com>
22746
22747 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
22748 Author: Markus Klotzbuecher <mk@denx.de>
22749 Date:   Wed Mar 26 18:26:43 2008 +0100
22750
22751     USB, Storage: fix a bug introduced in commit
22752     f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
22753     to only print only information on one storage device, but not for
22754     multiple.
22755
22756     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
22757
22758 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
22759 Author: Anatolij Gustschin <agust@denx.de>
22760 Date:   Wed Mar 26 17:47:44 2008 +0100
22761
22762     Fix compilation error in cmd_usb.c
22763
22764     This patch fixes compilation error
22765     cmd_usb.c: In function 'do_usb':
22766     cmd_usb.c:552: error: void value not ignored as it ought to be
22767
22768     Signed-off-by: Anatolij Gustschin <agust@denx.de>
22769     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
22770
22771 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
22772 Author: Kumar Gala <galak@kernel.crashing.org>
22773 Date:   Wed Mar 26 08:53:53 2008 -0500
22774
22775     85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
22776
22777     Provide a board_lmb_reserve helper function to ensure we reserve
22778     the page of memory we are using for the boot page translation code.
22779
22780     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22781
22782 commit 79679d80021ab095e639e250ca472fe526da02e2
22783 Author: Kumar Gala <galak@kernel.crashing.org>
22784 Date:   Wed Mar 26 08:34:25 2008 -0500
22785
22786     85xx: Update multicore boot mechanism to ePAPR v0.81 spec
22787
22788     The following changes are needed to be inline with ePAPR v0.81:
22789
22790     * r4, r5 and now always set to 0 on boot release
22791     * r7 is used to pass the size of the initial map area (IMA)
22792     * EPAPR_MAGIC value changed for book-e processors
22793     * changes in the spin table layout
22794     * spin table supports a 64-bit physical release address
22795
22796     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22797
22798 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
22799 Author: Jon Loeliger <jdl@freescale.com>
22800 Date:   Wed Mar 19 15:02:07 2008 -0500
22801
22802     FSL: Clean up board/freescale/common/Makefile
22803
22804     Each file that can be built here now follows some
22805     CONFIG_ option so that they are appropriately built
22806     or not, as needed.  And CONFIG_ defines were added
22807     to various board config files to make sure that happens.
22808
22809     The other board/freescale/*/Makefiles no longer need
22810     to reach up and over into ../common to build their
22811     individually needed files any more.
22812
22813     Boards that are CDS specific were renamed with cds_ prefix.
22814
22815     Signed-off-by: Jon Loeliger <jdl@freescale.com>
22816
22817 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
22818 Author: Kumar Gala <galak@kernel.crashing.org>
22819 Date:   Wed Feb 27 22:00:27 2008 -0600
22820
22821     85xx: Fix merge duplication
22822
22823     ft_fixup_cpu() got duplicated in some merge snafu.  Remove the duplicate.
22824
22825     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22826
22827 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
22828 Author: James Yang <James.Yang@freescale.com>
22829 Date:   Tue Feb 12 16:35:07 2008 -0600
22830
22831     85xx: Expand CCSR space with more DDR controller registers.
22832
22833     Signed-off-by: James Yang <James.Yang@freescale.com>
22834     Signed-off-by: Jon Loeliger <jdl@freescale.com>
22835     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22836
22837 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
22838 Author: James Yang <James.Yang@freescale.com>
22839 Date:   Fri Feb 8 18:05:08 2008 -0600
22840
22841     85xx: Speed up get_ddr_freq() and get_bus_freq()
22842
22843     get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
22844     called.  However, get_sys_info() recalculates extraneous information when
22845     called each time.  Have get_ddr_freq() and get_bus_freq() return memoized
22846     values from global_data instead.
22847
22848     Signed-off-by: James Yang <James.Yang@freescale.com>
22849     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22850
22851 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
22852 Author: James Yang <James.Yang@freescale.com>
22853 Date:   Fri Feb 8 16:46:27 2008 -0600
22854
22855     85xx: Show DDR memory data rate in addition to the memory clock frequency.
22856
22857     Show the DDR memory data rate in addition to the memory clock
22858     frequency.  For DDR/DDR2 memories the memory data rate is 2x the
22859     memory clock.
22860
22861     Signed-off-by: James Yang <James.Yang@freescale.com>
22862     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22863
22864 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
22865 Author: James Yang <James.Yang@freescale.com>
22866 Date:   Fri Feb 8 16:44:53 2008 -0600
22867
22868     85xx: get_tbclk() speed up and rounding fix
22869
22870     Speed up get_tbclk() by referencing pre-computed bus clock
22871     frequency value from global data instead of sys_info_t.  Fix
22872     rounding of result to nearest; previously it was rounding
22873     upwards.
22874
22875     Signed-off-by: James Yang <James.Yang@freescale.com>
22876     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22877
22878 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
22879 Author: Andy Fleming <afleming@freescale.com>
22880 Date:   Wed Feb 6 01:19:40 2008 -0600
22881
22882     Update SVR numbers to expand support
22883
22884     FSL has taken to using SVR[16:23] as an SOC sub-version field.  This
22885     is used to distinguish certain variants within an SOC family.  To
22886     account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
22887     constants to reflect the larger value.  We also add SVR numbers for all
22888     of the current variants.  Finally, to make things neater, rather than
22889     use an enormous switch statement to print out the CPU type, we create
22890     and array of SVR/name pairs (using a macro), and print out the CPU name
22891     that matches the SVR SOC version.
22892
22893     Signed-off-by: Andy Fleming <afleming@freescale.com>
22894
22895 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
22896 Author: Andy Fleming <afleming@freescale.com>
22897 Date:   Wed Feb 6 01:12:57 2008 -0600
22898
22899     Add the Freescale PCI device IDs
22900
22901     Signed-off-by: Andy Fleming <afleming@freescale.com>
22902
22903 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
22904 Author: Kumar Gala <galak@kernel.crashing.org>
22905 Date:   Thu Feb 14 11:04:23 2008 -0600
22906
22907     85xx: Added support for multicore boot mechanism
22908
22909     Added the cpu command that provides a generic mechanism to get status,
22910     reset, and release secondary cores in multicore processors.
22911
22912     Added support for using the ePAPR defined spin-table mechanism on 85xx.
22913
22914     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22915     Signed-off-by: Andy Fleming <afleming@freescale.com>
22916
22917 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
22918 Author: Kumar Gala <galak@kernel.crashing.org>
22919 Date:   Thu Jan 17 16:48:33 2008 -0600
22920
22921     85xx: Added support for multicore boot mechanism
22922
22923     Added the cpu command that provides a generic mechanism to get status,
22924     reset, and release secondary cores in multicore processors.
22925
22926     Added support for using the ePAPR defined spin-table mechanism on 85xx.
22927
22928     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22929
22930 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
22931 Author: Kumar Gala <galak@kernel.crashing.org>
22932 Date:   Wed Jan 30 14:55:14 2008 -0600
22933
22934     85xx: Add the concept of CFG_CCSRBAR_PHYS
22935
22936     When we go to 36-bit physical addresses we need to keep the concept of
22937     the physical CCSRBAR address seperate from the virtual one.
22938
22939     For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
22940
22941     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22942
22943 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
22944 Author: Wolfgang Denk <wd@denx.de>
22945 Date:   Wed Mar 26 15:38:47 2008 +0100
22946
22947     Coding style cleanup.
22948
22949     Signed-off-by: Wolfgang Denk <wd@denx.de>
22950
22951 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
22952 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
22953 Date:   Wed Mar 26 13:02:13 2008 +0100
22954
22955     Add CFG_RTC_DS1337_NOOSC to turn off OSC output
22956
22957     The default settings for RTC DS1337 keeps the OSC
22958     output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
22959     turn it off.
22960
22961     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
22962
22963 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
22964 Author: Wolfgang Denk <wd@denx.de>
22965 Date:   Wed Mar 26 11:48:46 2008 +0100
22966
22967     Cleanup coding style, update CHANGELOG
22968
22969     Signed-off-by: Wolfgang Denk <wd@denx.de>
22970
22971 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
22972 Author: Wolfgang Denk <wd@denx.de>
22973 Date:   Wed Mar 26 10:40:12 2008 +0100
22974
22975     README: update documentation (availability, links, etc.)
22976
22977     Signed-off-by: Wolfgang Denk <wd@denx.de>
22978
22979 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
22980 Author: Aras Vaichas <arasv@magtech.com.au>
22981 Date:   Tue Mar 25 12:09:07 2008 +1100
22982
22983     USB Storage, add meaningful return value
22984
22985     This patch changes the "usb storage" command to return success if it
22986     finds a USB storage device, otherwise it returns error.
22987
22988     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
22989
22990 commit 18e69a35efbb078403db0c0063986470dad7d082
22991 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
22992 Date:   Fri Mar 14 23:20:18 2008 +0300
22993
22994     83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
22995
22996     Linux understands "host" (default), "peripheral" and "otg" (broken).
22997     Though, U-Boot doesn't restrict dr_mode variable to these values (think
22998     of renames in future).
22999
23000     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23001     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23002
23003 commit c7604783b236e368f225efb7b3efb418fe20b404
23004 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23005 Date:   Fri Mar 14 23:20:30 2008 +0300
23006
23007     tsec: fix link detection for the RTL8211B PHY
23008
23009     RTL8211B sets link state register after autonegotiation complete,
23010     so with bootdelay=0 RTL8211B will report lack of the link.
23011
23012     To fix this, we should wait for aneg to complete, even if the
23013     link is currently down.
23014
23015     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23016     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23017
23018 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
23019 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23020 Date:   Mon Mar 24 20:47:09 2008 +0300
23021
23022     mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
23023
23024     device_type = "soc" is being deprecated, newer device trees will use
23025     "fsl,soc" and/or "fsl,immr" for the soc nodes.
23026
23027     This patch also adds clock-frequency property for soc nodes (the same
23028     value as bus-frequency).
23029
23030     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23031
23032 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
23033 Author: Joe D'Abbraccio <ljd015@freescale.com>
23034 Date:   Mon Mar 24 13:00:59 2008 -0400
23035
23036     Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
23037
23038     With the original value of 1/2 clock cycle delay, the system ran relatively
23039     stable except when we run benchmarks that are intensive users of memory.
23040     When I run samba connected disk with a HDBENCH test, the system locks-up
23041     or reboots sporadically.
23042
23043     Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
23044
23045 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
23046 Author: Scott Wood <scottwood@freescale.com>
23047 Date:   Mon Mar 24 12:44:13 2008 -0500
23048
23049     mpc83xx: Set PCI I/O bus-address base to zero.
23050
23051     The device trees for these boards describe PCI I/O as starting from
23052     address zero from the device's perspective.
23053
23054     Placing I/O elsewhere may cause problems with certain PCI boards, and may
23055     cause problems with Linux.
23056
23057     Signed-off-by: Scott Wood <scottwood@freescale.com>
23058
23059 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
23060 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23061 Date:   Mon Mar 24 20:47:05 2008 +0300
23062
23063     mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
23064
23065     At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
23066     This patch fixes "system time drifting" problem.
23067
23068     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23069
23070 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
23071 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23072 Date:   Mon Mar 24 20:47:02 2008 +0300
23073
23074     mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
23075
23076     This is needed to update /choosen/linux,stdout-path properly.
23077
23078     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23079
23080 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
23081 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23082 Date:   Mon Mar 24 20:47:00 2008 +0300
23083
23084     mpc83xx: MPC8360E-RDK: add dhcp command
23085
23086     Plus modify environment to use it and remove bootfile env variable,
23087     it is internal and CONFIG_BOOTFILE is used for these purposes.
23088
23089     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23090
23091 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
23092 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23093 Date:   Mon Mar 24 20:46:57 2008 +0300
23094
23095     mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
23096
23097     Current DDR setup easily causes memory corruption, this patch fixes it.
23098
23099     Also fix TIMING_CFG0_MRS_CYC definition.
23100
23101     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23102
23103 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
23104 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23105 Date:   Mon Mar 24 20:46:53 2008 +0300
23106
23107     mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
23108
23109     This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
23110     controller and FHCI (QE USB).
23111
23112     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23113
23114 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
23115 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23116 Date:   Mon Mar 24 20:46:51 2008 +0300
23117
23118     mpc83xx: MPC8360E-RDK: add support for NAND
23119
23120     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23121
23122 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
23123 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23124 Date:   Mon Mar 24 20:46:46 2008 +0300
23125
23126     mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
23127
23128     This is needed for BCM PHYs to work on this board.
23129
23130     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23131
23132 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
23133 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23134 Date:   Mon Mar 24 20:46:34 2008 +0300
23135
23136     uec: add support for Broadcom BCM5481 Gigabit PHY
23137
23138     This patch adds basic support for Broadcom BCM5481 PHY.
23139
23140     RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
23141     Peter Barada <peterb@logicpd.com>.
23142
23143     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23144
23145 commit 6a600c3a1876bc203445df4f0fd6b12648259666
23146 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23147 Date:   Mon Mar 24 20:46:28 2008 +0300
23148
23149     uec: add support for RGMII_RXID interface mode
23150
23151     PHY drivers will use it to setup software delay between RXD and RXC
23152     signals.
23153
23154     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23155
23156 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
23157 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23158 Date:   Mon Mar 24 20:46:24 2008 +0300
23159
23160     uec: add support for gbit mii status readings
23161
23162     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23163
23164 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
23165 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23166 Date:   Mon Mar 24 17:40:47 2008 +0300
23167
23168     83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
23169
23170     This is primarily for the early console support.
23171
23172     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23173
23174 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
23175 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23176 Date:   Mon Mar 24 17:40:43 2008 +0300
23177
23178     83xx: initialize serdes for MPC837XRDB boards
23179
23180     On the MPC8377ERDB: 2 SATA and 2 PCI-E.
23181     On the MPC8378ERDB: 2 PCI-E
23182     On the MPC8379ERDB: 4 SATA
23183
23184     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23185
23186 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
23187 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23188 Date:   Mon Mar 24 17:40:32 2008 +0300
23189
23190     83xx: serdes setup routines
23191
23192     This patch adds few routines to configure serdes on 837x targets.
23193
23194     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23195
23196 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
23197 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23198 Date:   Mon Mar 24 17:40:27 2008 +0300
23199
23200     83xx: split COBJS onto separate lines
23201
23202     ..plus get rid of some #ifdefs in the .c files.
23203
23204     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23205
23206 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
23207 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23208 Date:   Mon Mar 24 17:40:23 2008 +0300
23209
23210     83xx: nand support for MPC837XRDB boards
23211
23212     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23213
23214 commit 82e45a204190593e8613145a928f998fb8c909c4
23215 Author: Jerry Van Baren <gvb.uboot@gmail.com>
23216 Date:   Tue Mar 18 21:44:41 2008 -0400
23217
23218     Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
23219
23220     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23221     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23222
23223 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
23224 Author: Michael Barkowski <michael.barkowski@freescale.com>
23225 Date:   Thu Mar 20 13:15:39 2008 -0400
23226
23227     mpc8323erdb: remove RTC and add EEPROM
23228
23229     There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
23230
23231     Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
23232     Acked-by: Kim Phillips <kim.phillips@freescale.com>
23233
23234 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
23235 Author: Michael Barkowski <michael.barkowski@freescale.com>
23236 Date:   Thu Mar 20 13:15:34 2008 -0400
23237
23238     mpc8323erdb: Improve the system performance
23239
23240     The following changes are based on kernel UCC ethernet performance:
23241
23242     1.  Make the CSB bus pipeline depth as 4, and enable the repeat mode
23243     2.  Optimize transactions between QE and CSB.  Added CFG_SPCR_OPT
23244         switch to enable this setting.
23245
23246     The following changes are based on the App Note AN3369 and
23247     verified to improve memory latency using LMbench:
23248
23249     3.  CS0_CONFIG[AP_n_EN] is changed from 1 to 0
23250     4.  CS0_CONFIG[ODT_WR_CONFIG] set to 1.  Was a reserved setting
23251         previously.
23252     5.  TIMING_CFG_1[WRREC] is changed from 3clks to 2clks  (based on
23253         Twr=15ns, and this was already the setting in DDR_MODE)
23254     6.  TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
23255         Trp=15ns)
23256     7.  TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
23257         Tras=40ns)
23258     8.  TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
23259         Trcd=15ns)
23260     9.  TIMING_CFG_1[REFREC] changed from 21 clks to 11clks.  (based on
23261         Trfc=75ns)
23262     10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks.  (based
23263         on Tfaw=50ns)
23264     11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
23265         on CL=3 and WL=2).
23266
23267     Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
23268     Acked-by: Kim Phillips <kim.phillips@freescale.com>
23269
23270 commit fc549c871f43933396a5b3e21d897023d4b31b8d
23271 Author: Michael Barkowski <michael.barkowski@freescale.com>
23272 Date:   Thu Mar 20 13:15:28 2008 -0400
23273
23274     mpc8323erdb: use readable DDR config macros
23275
23276     Use available shift/mask macros to define DDR configuration.
23277
23278     Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
23279     Acked-by: Kim Phillips <kim.phillips@freescale.com>
23280
23281 commit 89c7784ed90ba50301eec521144f95111e472906
23282 Author: Timur Tabi <timur@freescale.com>
23283 Date:   Fri Feb 8 13:15:55 2008 -0600
23284
23285     83xx: Add Vitesse VSC7385 firmware uploading
23286
23287     Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
23288     the Vitesse VSC7385 firmware.  Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
23289     Cleaned up the board header files to make selecting the VSC7385 easier to
23290     control.
23291
23292     Signed-off-by: Timur Tabi <timur@freescale.com>
23293     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23294
23295 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
23296 Author: Timur Tabi <timur@freescale.com>
23297 Date:   Fri Feb 8 13:15:54 2008 -0600
23298
23299     NET: Add Vitesse VSC7385 firmware uploading
23300
23301     The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
23302     and other boards.  A small firwmare must be uploaded to its on-board memory
23303     before it can be enabled.  This patch adds the code which uploads firmware
23304     (but not the firmware itself).
23305
23306     Previously, this feature was provided by a U-Boot application that was
23307     made available only on Freescale BSPs.  The VSC7385 firmware must still
23308     be obtained separately, but at least there is no longer a need for a separate
23309     application.
23310
23311     Signed-off-by: Timur Tabi <timur@freescale.com>
23312     Acked-by: Ben Warren <biggerbadderben@gmail.com>
23313
23314 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
23315 Author: Wolfgang Denk <wd@denx.de>
23316 Date:   Wed Mar 26 00:52:10 2008 +0100
23317
23318     Coding Style cleanyp; update CHANGELOG
23319
23320     Signed-off-by: Wolfgang Denk <wd@denx.de>
23321
23322 commit 43ddd9c820fec44816188f53346b464e20b3142d
23323 Author: Jerry Van Baren <gvb.uboot@gmail.com>
23324 Date:   Sat Mar 22 14:23:49 2008 -0400
23325
23326     Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
23327
23328     These defines embedded the u-boot env variables and/or the bd_t structure
23329     in the fdt blob.  The conclusion of discussion on the u-boot email list
23330     was that embedding these in the fdt blob is not useful: there are better
23331     ways of passing the data (in fact, the fdt blob itself replaces the
23332     bd_t struct).
23333
23334     The only board that enables these is the stxxtc and they don't appear
23335     to be used by linux.
23336
23337     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23338     Acked-by: Kim Phillips <kim.phillips@freescale.com>
23339
23340 commit 22ed2285743359fd1fe73e411dff914b2256e68f
23341 Author: Stefan Roese <sr@denx.de>
23342 Date:   Mon Mar 17 10:49:25 2008 +0100
23343
23344     rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
23345
23346     Signed-off-by: Stefan Roese <sr@denx.de>
23347
23348 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
23349 Author: Kyungmin Park <kmpark@infradead.org>
23350 Date:   Mon Mar 17 08:54:06 2008 +0900
23351
23352     Add Flex-OneNAND booting support
23353
23354     Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
23355     using a NOR Flash interface. This on-chip integration enables system designers
23356     to reduce external system logic and use high-density NAND Flash
23357     in applications that would otherwise have to use more NOR components.
23358
23359     Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
23360     in more flexible way. While MLC area of Flex-OneNAND can be used to store data
23361     that require low reliability and high density, SLC area of Flex-OneNAND
23362     to store data that need high reliability and high performance. Flex-OneNAND
23363     can let users take advantage of storing these two different types of data
23364     into one chip, which is making Flex-OneNAND more cost- and space-effective.
23365
23366     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
23367
23368 commit c512389cc4a10253249271ff6c887c6dab1f0db2
23369 Author: André Schwarz <andre.schwarz@matrix-vision.de>
23370 Date:   Thu Mar 13 13:50:52 2008 +0100
23371
23372     MPC5200: support setup without FEC
23373
23374     Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
23375     defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
23376
23377     Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
23378     Acked-by: Grant Likely <grant.likely@secretlab.ca>
23379
23380 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
23381 Author: Jon Loeliger <jdl@freescale.com>
23382 Date:   Wed Mar 5 18:05:46 2008 -0600
23383
23384     FSL: Move board/mpc8266ads under board/freescale
23385
23386     Signed-off-by: Jon Loeliger <jdl@freescale.com>
23387
23388 commit 7f1d846e5c5754449c286587d099d85246062772
23389 Author: Jon Loeliger <jdl@freescale.com>
23390 Date:   Wed Mar 5 18:05:47 2008 -0600
23391
23392     FSL: Move board/mpc7448hpc2 under board/freescale
23393
23394     Signed-off-by: Jon Loeliger <jdl@freescale.com>
23395
23396 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
23397 Author: Jon Loeliger <jdl@freescale.com>
23398 Date:   Wed Mar 5 18:05:45 2008 -0600
23399
23400     FSL: Move board/mpc8260ads under board/freescale
23401
23402     Signed-off-by: Jon Loeliger <jdl@freescale.com>
23403
23404 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
23405 Author: goda.yusuke <goda.yusuke@renesas.com>
23406 Date:   Wed Mar 5 17:08:33 2008 +0900
23407
23408     net: Add support AX88796L ethernet device
23409
23410     AX88796L is device of NE2000 compatible.
23411     This patch support AX88796L ethernet device.
23412
23413     Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
23414     Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23415
23416 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
23417 Author: Wolfgang Denk <wd@denx.de>
23418 Date:   Tue Mar 25 22:50:41 2008 +0100
23419
23420     ne2000 driver: change #ifdef to Makefile conditional compilation
23421
23422     Signed-off-by: Wolfgang Denk <wd@denx.de>
23423
23424 commit e710185aae90c64d39c2d453e40e58ceefe4f250
23425 Author: goda.yusuke <goda.yusuke@renesas.com>
23426 Date:   Wed Mar 5 17:08:20 2008 +0900
23427
23428     net: Divided code of NE2000 ethernet driver
23429
23430     There are more devices of the NE2000 base.
23431     A present code is difficult for us to support more devices.
23432     To support more NE2000 clone devices, separated the function.
23433
23434     Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
23435     Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23436
23437 commit 395bce4f59a507a60a475f7ee46bed47de9482df
23438 Author: Mike Frysinger <vapier@gentoo.org>
23439 Date:   Sun Feb 24 23:58:13 2008 -0500
23440
23441     net/Blackfin: move on-chip MAC driver into drivers/net/
23442
23443     The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
23444     directory, but it is not board specific, so relocate it to the drivers dir
23445     so that other Blackfin ports can utilize it.
23446
23447     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
23448
23449 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
23450 Author: Mike Frysinger <vapier@gentoo.org>
23451 Date:   Sun Feb 24 23:52:35 2008 -0500
23452
23453     smc91111: use SSYNC() rather than asm(ssync) for Blackfin
23454
23455     Since the "ssync" instruction may have hardware anomalies associated with
23456     it, have the smc91111 driver use the SSYNC macro rather than invoking it
23457     directly.  We workaround all the anomalies via this macro.
23458
23459     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
23460
23461 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
23462 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
23463 Date:   Sun Feb 17 22:57:47 2008 +0000
23464
23465     8xx: Update OF support on 8xx
23466
23467     This patch does some shifting around of OF support on 8xx.
23468
23469     Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
23470
23471 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
23472 Author: Kumar Gala <galak@kernel.crashing.org>
23473 Date:   Fri Feb 15 15:16:18 2008 -0600
23474
23475     ppc: Allow boards to specify how much memory they can map
23476
23477     For historical reasons we limited the stack to 256M because some boards
23478     could only map that much via BATS.  However newer boards are capable of
23479     mapping more memory (for example 85xx is capble of doing up to 2G).
23480
23481     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23482
23483 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
23484 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
23485 Date:   Fri Feb 15 01:05:58 2008 +0000
23486
23487     8xx : Add OF support to Adder875 board port - resubmit
23488
23489     Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
23490
23491 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
23492 Author: Kumar Gala <galak@kernel.crashing.org>
23493 Date:   Thu Feb 14 20:44:42 2008 -0600
23494
23495     Add setexpr command
23496
23497     Add a simple expr style command that will set an env variable as the result
23498     of the command.  This allows us to do simple math in shell.  The following
23499     operations are supported: &, |, ^, +, -, *, /.
23500
23501     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23502
23503 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
23504 Author: Jon Loeliger <jdl@freescale.com>
23505 Date:   Wed Mar 5 17:27:48 2008 -0600
23506
23507     FSL: Move board/mpc7448hpc2 under board/freescale
23508
23509     Signed-off-by: Jon Loeliger <jdl@freescale.com>
23510
23511 commit 449c703374a8868453425e15da7e2f76221b72e4
23512 Author: Jon Loeliger <jdl@freescale.com>
23513 Date:   Wed Mar 5 17:21:43 2008 -0600
23514
23515     FSL: Move board/mpc8266ads under board/freescale
23516
23517     Signed-off-by: Jon Loeliger <jdl@freescale.com>
23518
23519 commit 5863577989ad689427bb750107e9a75f1c1645d2
23520 Author: Jon Loeliger <jdl@freescale.com>
23521 Date:   Wed Mar 5 16:41:41 2008 -0600
23522
23523     FSL: Move board/mpc8260ads under board/freescale
23524
23525     Signed-off-by: Jon Loeliger <jdl@freescale.com>
23526
23527 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
23528 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23529 Date:   Tue Mar 25 21:30:08 2008 +0900
23530
23531     [MIPS] Move gth2_config from ARM section to MIPS
23532
23533     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23534
23535 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
23536 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23537 Date:   Tue Mar 25 21:30:07 2008 +0900
23538
23539     [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
23540
23541     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23542
23543 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
23544 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23545 Date:   Tue Mar 25 21:30:07 2008 +0900
23546
23547     [MIPS] Fix dcache_status()
23548
23549     You can't judge UNCACHED by Config.K0 LSB.
23550
23551     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23552
23553 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
23554 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23555 Date:   Tue Mar 25 21:30:07 2008 +0900
23556
23557     [MIPS] Introduce _machine_restart
23558
23559     Handles machine specific functions by using weak functions.
23560
23561     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23562
23563 commit decaba6f5cf386d569ac3997bebb871b966c6b18
23564 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23565 Date:   Tue Mar 25 21:30:07 2008 +0900
23566
23567     [MIPS] Cleanup CP0 Status initialization
23568
23569     Add setup_c0_status from Linux. For the moment we disable interrupts, set
23570     CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
23571     reset-time configuration and will work well across most processors.
23572
23573     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23574
23575 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
23576 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23577 Date:   Tue Mar 25 21:30:07 2008 +0900
23578
23579     [MIPS] Initialize CP0 Cause before setting up CP0 Status register
23580
23581     Without this change, we'll be suffering from deffered WATCH exception
23582     once Status.EXL is cleared. Make sure Cause.WP is cleared.
23583
23584     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23585
23586 commit 26138623230ca2bad3c78e05a65527ea70c8b688
23587 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23588 Date:   Tue Mar 25 21:30:07 2008 +0900
23589
23590     [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
23591
23592     Move things to appropriate place.
23593
23594     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23595
23596 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
23597 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23598 Date:   Tue Mar 25 21:30:06 2008 +0900
23599
23600     [MIPS] Implement flush_cache()
23601
23602     We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
23603     don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
23604     function is used not only in U-Boot specfic programs but also at loading
23605     target binaries.
23606
23607     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23608
23609 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
23610 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23611 Date:   Tue Mar 25 21:30:06 2008 +0900
23612
23613     [MIPS] Fix I-/D-cache initialization loops
23614
23615     Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
23616     again per a loop for I-cache initialization. But according to 'See MIPS
23617     Run', we're encouraged to use three separate loops rather than combining
23618     them *for both I- and D-cache*. This patch tries to fix this.
23619
23620     In accordance with fixing above, mips_init_[id]cache are separated from
23621     mips_cache_reset(), and rewrite cache loops are completely rewritten with
23622     useful macros.
23623
23624     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23625
23626 commit 1898840797c7f50799377bd5b285a8a93a82c419
23627 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23628 Date:   Tue Mar 25 21:30:06 2008 +0900
23629
23630     [MIPS] Replace memory clearance code with f_fill64
23631
23632     This routine fills memory with zero by 64 bytes, and is 64-bit capable.
23633
23634     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23635
23636 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
23637 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23638 Date:   Tue Mar 25 21:30:06 2008 +0900
23639
23640     [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
23641
23642     This patch replaces the current function definitions with NESTED, LEAF
23643     and END macro. They specify some more additional information about the
23644     function; an alignment of symbol, type of symbol, stack frame usage, etc.
23645     These information explicitly tells the assembler and the debugger about
23646     the types of code we want to generate.
23647
23648     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23649
23650 commit 282223a607c611425fa33f5428f8eae6636972bb
23651 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23652 Date:   Tue Mar 25 11:43:17 2008 +0900
23653
23654     [MIPS] asm headers' updates
23655
23656     Make some asm headers adjusted to the latest Linux kernel.
23657
23658     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23659
23660 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
23661 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23662 Date:   Tue Mar 25 11:39:29 2008 +0900
23663
23664     [MIPS] Request for the 'mips_cache_lock()' removal
23665
23666     The initial intension of having mips_cache_lock() was to use the cache
23667     as memory for temporary stack use so that a C environment can be set up
23668     as early as possible.
23669
23670     But now mips_cache_lock() follow lowlevel_init(). We've already have the
23671     real memory initilaized at this point, therefore we could/should use it.
23672     No reason to lock at all.
23673
23674     Other problems:
23675
23676     Cache locking is not consistent across MIPS implementaions. Some imple-
23677     mentations don't support locking at all. The style of locking varies -
23678     some support per line locking, others per way, etc. Some parts use bits
23679     in status registers instead of cache ops. Current mips_cache_lock() is
23680     not necessarily general-purpose.
23681
23682     And this is worthy of special mention; once U-Boot/MIPS locks the lines,
23683     they are never get unlocked, so the code relies on whatever gets loaded
23684     after U-Boot to re-initialize the cache and clear the locks. We're sup-
23685     posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
23686     but leave the situation as it is for a long time.
23687
23688     For these reasons, I proposed the removal of mips_cache_lock() from the
23689     global start-up code.
23690
23691     This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
23692     *things have changed*. If he wants the same behavior as before, he needs
23693     to have CFG_INIT_RAM_LOCK_MIPS in his config file.
23694
23695     If we don't have any regression report through several releases, then
23696     we'll remove codes entirely.
23697
23698     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23699     Acked-by: Andrew Dyer <amdyer@gmail.com>
23700
23701 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
23702 Author: Yuri Tikhonov <yur@emcraft.com>
23703 Date:   Mon Mar 24 11:30:54 2008 +0100
23704
23705     lwmon5 SYSMON POST: fix backlight control
23706
23707     If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
23708     run on the board, then the SYSMON POST controls the display backlight
23709     (doesn't switch backlight ON if POST FAILED, and does switch the
23710     backlight ON if PASSED).
23711
23712     If not, then the video driver controls the display backlight (just
23713     switch ON the backlight upon initialization).
23714
23715     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
23716
23717 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
23718 Author: Yuri Tikhonov <yur@emcraft.com>
23719 Date:   Mon Mar 24 11:29:14 2008 +0100
23720
23721     lwmon5 SYSMON POST: fix handling of negative temperatures
23722
23723     Fix errors in the LWMON5 Sysmon POST for negative temperatures.
23724
23725     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
23726
23727 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
23728 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23729 Date:   Fri Mar 7 16:04:25 2008 +0900
23730
23731     pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
23732
23733     In current source code, when the device number of PCI is 0, process PCI
23734     bridge without fail. However, when the device number is 0, it is not PCI
23735     always bridge. There are times when device of PCI allocates.
23736
23737     When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
23738     use this patch.
23739
23740     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23741     Acked-by: Stefan Roese <sr@denx.de>
23742
23743 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
23744 Author: Yuri Tikhonov <yur@emcraft.com>
23745 Date:   Fri Mar 21 09:18:40 2008 +0100
23746
23747     LWMON5: fix dsPIC POST
23748
23749     Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
23750
23751     Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
23752
23753 commit 388b82fddc7c05596f3f615f190da0448227dc82
23754 Author: Bartlomiej Sieka <tur@semihalf.com>
23755 Date:   Thu Mar 20 23:23:13 2008 +0100
23756
23757     [new uImage] Enable new uImage support for the pcs440ep board.
23758
23759     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23760
23761 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
23762 Author: Bartlomiej Sieka <tur@semihalf.com>
23763 Date:   Thu Mar 20 23:23:13 2008 +0100
23764
23765     [new uImage] Do not compile new uImage format support by default
23766
23767     Disable default building of new uImage format support in preparation
23768     for merge with the master. Support for new format can be enabled on
23769     a per-board basis, by defining the following in the board's config file:
23770
23771     #define CONFIG_FIT             1
23772     #define CONFIG_OF_LIBFDT       1
23773
23774     This can be optionally defined to give more verbose output:
23775
23776     #define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
23777
23778     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23779
23780 commit dafaede8a46c7159310239e036c93e31c6374487
23781 Author: Bartlomiej Sieka <tur@semihalf.com>
23782 Date:   Thu Mar 20 23:20:31 2008 +0100
23783
23784     [new uImage] Disable debuging output in preparation for merge with master
23785
23786     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23787
23788 commit fbe7a155027beacebaee9b32e1ada781fe924bca
23789 Author: Bartlomiej Sieka <tur@semihalf.com>
23790 Date:   Thu Mar 20 19:38:45 2008 +0100
23791
23792     [new uImage] Compilation and new uImage handling fixes for imxtract
23793
23794     Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
23795     include/config_cmd_default.h. Fix few warnings and handling of new format
23796     images.
23797
23798     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23799
23800 commit 36cc8cbb3379d5166f882641123521735c469f92
23801 Author: Bartlomiej Sieka <tur@semihalf.com>
23802 Date:   Thu Mar 20 23:10:19 2008 +0100
23803
23804     [new uImage] Fix autoscr command used with new uImage format
23805
23806     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23807
23808 commit 43142e817f0597be412e7cbe19413f5532eafa5d
23809 Author: Bartlomiej Sieka <tur@semihalf.com>
23810 Date:   Thu Mar 20 23:10:19 2008 +0100
23811
23812     [new uImage] Fix *.its files location in documentation
23813
23814     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23815
23816 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
23817 Author: Wolfgang Denk <wd@denx.de>
23818 Date:   Thu Mar 20 22:01:38 2008 +0100
23819
23820     lwmon5 POST: remove unreachable code
23821
23822     plus some coding style cleanup
23823
23824     Signed-off-by: Wolfgang Denk <wd@denx.de>
23825
23826 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
23827 Author: Yuri Tikhonov <yur@emcraft.com>
23828 Date:   Thu Mar 20 17:56:04 2008 +0300
23829
23830     LWMON5: POST RTC fix
23831
23832     Modify the RTC API to provide one a status for the time reported by
23833     the rtc_get() function:
23834       0 - a reliable time is guaranteed,
23835     < 0 - a reliable time isn't guaranteed (power fault, clock issues,
23836           and so on).
23837
23838     The RTC chip drivers are responsible for providing this info if the
23839     corresponding chip supports such functionality. If not - always
23840     report that the time is reliable.
23841
23842     The POST RTC test was modified to detect the RTC faults utilizing
23843     this new rtc_get() feature.
23844
23845     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
23846
23847 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
23848 Author: Martin Krause <martin.krause@tqs.de>
23849 Date:   Wed Mar 19 14:25:14 2008 +0100
23850
23851     TQM5200B: update MTD partition layout
23852
23853     - insert partition for dtb blob to TQM5200B MTD layout
23854     - set env variables dependent on the configured board
23855       (TQM5200 or TQM5200B)
23856
23857     Signed-off-by: Martin Krause <martin.krause@tqs.de>
23858
23859 commit f0105727d132f56a21fa3ed8b162309cca6cac44
23860 Author: Stefan Roese <sr@denx.de>
23861 Date:   Wed Mar 19 07:09:26 2008 +0100
23862
23863     CFI: Small cleanup for FLASH_SHOW_PROGRESS
23864
23865     With this patch we don't need that many #ifdef's in the code. It moves
23866     the subtraction into the macro and defines a NOP-macro when
23867     CONFIG_FLASH_SHOW_PROGRESS is not defined.
23868
23869     Signed-off-by: Stefan Roese <sr@denx.de>
23870     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
23871
23872 commit 9a042e9ca512beaaa2cb450274313fc477141241
23873 Author: Jerry Van Baren <gvb.uboot@gmail.com>
23874 Date:   Sat Mar 8 13:48:01 2008 -0500
23875
23876     Flash programming progress countdown.
23877
23878     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23879
23880 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
23881 Author: Bartlomiej Sieka <tur@semihalf.com>
23882 Date:   Wed Mar 19 10:00:06 2008 +0100
23883
23884     [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
23885
23886     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23887
23888 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
23889 Author: David Gibson <david@gibson.dropbear.id.au>
23890 Date:   Mon Feb 18 18:09:04 2008 +1100
23891
23892     libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
23893
23894     Since fdt_node_offset_by_compatible() was converted to the new
23895     fdt_next_node() iterator, a chunk of initialization code became
23896     redundant, but was not removed by oversight.  This patch cleans it up.
23897
23898     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
23899
23900 commit d0ccb9b140b472039732de102fc14597eedb14df
23901 Author: David Gibson <david@gibson.dropbear.id.au>
23902 Date:   Mon Feb 18 18:06:31 2008 +1100
23903
23904     libfdt: Trivial cleanup for CHECK_HEADER)
23905
23906     Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
23907     However, there are a handful of functions (fdt_move, rw_check_header,
23908     fdt_open_into) from other files which could also use it (currently
23909     they open-code something more-or-less identical).  Therefore, this
23910     patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
23911     places.
23912
23913     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
23914
23915 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
23916 Author: Kumar Gala <galak@kernel.crashing.org>
23917 Date:   Wed Feb 20 14:32:36 2008 -0600
23918
23919     Fix fdt boardsetup command parsing
23920
23921     The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
23922
23923     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23924
23925 commit 804887e6001e2f00bea11431bf34d6d472512cda
23926 Author: Kumar Gala <galak@kernel.crashing.org>
23927 Date:   Fri Feb 15 03:34:36 2008 -0600
23928
23929     Add sub-commands to fdt
23930
23931     fdt header                          - Display header info
23932     fdt bootcpu <id>                    - Set boot cpuid
23933     fdt memory <addr> <size>            - Add/Update memory node
23934     fdt rsvmem print                    - Show current mem reserves
23935     fdt rsvmem add <addr> <size>        - Add a mem reserve
23936     fdt rsvmem delete <index>           - Delete a mem reserves
23937
23938     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23939
23940 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
23941 Author: David Gibson <david@gibson.dropbear.id.au>
23942 Date:   Thu Feb 14 16:50:34 2008 +1100
23943
23944     libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
23945
23946     fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
23947     node which has NOP tags interspersed with its properties.  In this
23948     case fdt_add_subnode_namelen() will put the new subnode before the
23949     first NOP tag, even if there are properties after it, which will
23950     result in an invalid blob.
23951
23952     This patch fixes the bug, and adds a testcase for it.
23953
23954     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
23955
23956 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
23957 Author: David Gibson <david@gibson.dropbear.id.au>
23958 Date:   Tue Feb 12 11:58:31 2008 +1100
23959
23960     libfdt: Add and use a node iteration helper function.
23961
23962     This patch adds an fdt_next_node() function which can be used to
23963     iterate through nodes of the tree while keeping track of depth.  This
23964     function is used to simplify the iteration code in a lot of other
23965     functions, and is also exported for use by library users.
23966
23967     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
23968
23969 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
23970 Author: David Gibson <david@gibson.dropbear.id.au>
23971 Date:   Fri Jan 11 14:55:05 2008 +1100
23972
23973     libfdt: Add fdt_set_name() function
23974
23975     This patch adds an fdt_set_name() function to libfdt, mirroring
23976     fdt_get_name().  This is a r/w function which alters the name of a
23977     given device tree node.
23978
23979     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
23980
23981 commit 23e20aa6488e6c0622496549861bfdc74108debe
23982 Author: Yuri Tikhonov <yur@pollux.denx.de>
23983 Date:   Tue Mar 18 13:33:30 2008 +0100
23984
23985     lwmon5: Fix register test logic to match the specific GDC h/w.
23986
23987     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
23988     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
23989
23990 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
23991 Author: Yuri Tikhonov <yur@pollux.denx.de>
23992 Date:   Tue Mar 18 13:27:57 2008 +0100
23993
23994     Fix backlight in the lwmon5 POST.
23995
23996     Backlight was switched on even when temperature was too low.
23997
23998     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
23999     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24000
24001 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
24002 Author: Yuri Tikhonov <yur@pollux.denx.de>
24003 Date:   Wed Feb 6 18:48:36 2008 +0100
24004
24005     The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
24006
24007      To enable this, alternative, configuration the U-Boot board configuration
24008     file for lwmon5 includes the definitions of alternative addresses for header
24009     (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
24010
24011      The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
24012     and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
24013     lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
24014
24015     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24016
24017 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
24018 Author: Yuri Tikhonov <yur@pollux.denx.de>
24019 Date:   Mon Feb 4 17:11:53 2008 +0100
24020
24021     Add support for the lwmon5 board reset via GPIO58.
24022
24023     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24024     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24025
24026 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
24027 Author: Yuri Tikhonov <yur@pollux.denx.de>
24028 Date:   Mon Feb 4 17:09:55 2008 +0100
24029
24030     Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
24031
24032     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24033     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24034
24035 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
24036 Author: Yuri Tikhonov <yur@pollux.denx.de>
24037 Date:   Mon Feb 4 14:11:03 2008 +0100
24038
24039     The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
24040
24041     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24042     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24043
24044 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
24045 Author: Yuri Tikhonov <yur@pollux.denx.de>
24046 Date:   Mon Feb 4 14:10:42 2008 +0100
24047
24048     The patch adds new POST tests for the Lwmon5 board. These are:
24049
24050     * External Watchdog test;
24051     * dsPIC tests;
24052     * FPGA test;
24053     * GDC test;
24054     * Sysmon tests.
24055
24056     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24057     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24058
24059 commit c2ed33efbfff5767bca236828e021c55fd547b6c
24060 Author: Yuri Tikhonov <yur@pollux.denx.de>
24061 Date:   Mon Feb 4 14:10:01 2008 +0100
24062
24063     Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
24064
24065     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24066
24067 commit 3a5d1e7f1309998791702b2a559e3126781746b9
24068 Author: Yuri Tikhonov <yur@pollux.denx.de>
24069 Date:   Tue Mar 18 13:33:30 2008 +0100
24070
24071     lwmon5: Fix register test logic to match the specific GDC h/w.
24072
24073     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24074     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24075
24076 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
24077 Author: Yuri Tikhonov <yur@pollux.denx.de>
24078 Date:   Tue Mar 18 13:27:57 2008 +0100
24079
24080     Fix backlight in the lwmon5 POST.
24081
24082     Backlight was switcehd on even when temperature was too low.
24083
24084     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24085     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24086
24087 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
24088 Author: Yuri Tikhonov <yur@pollux.denx.de>
24089 Date:   Wed Feb 6 18:48:36 2008 +0100
24090
24091      The patch introduces the alternative configuration of the log buffer for
24092     the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
24093     the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
24094     PPC440EPX_GPT0_COMP5).
24095
24096      To enable this, alternative, configuration the U-Boot board configuration
24097     file for lwmon5 includes the definitions of alternative addresses for header
24098     (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
24099
24100      The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
24101     and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
24102     lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
24103
24104     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24105
24106 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
24107 Author: Yuri Tikhonov <yur@pollux.denx.de>
24108 Date:   Mon Feb 4 17:11:53 2008 +0100
24109
24110     Add support for the lwmon5 board reset via GPIO58.
24111
24112     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24113     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24114
24115 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
24116 Author: Yuri Tikhonov <yur@pollux.denx.de>
24117 Date:   Mon Feb 4 17:09:55 2008 +0100
24118
24119     Some fixes to dspic, fpga, and gdc post tests for lwmon5.
24120     Disable external watch-dog for now.
24121
24122     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24123     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24124
24125 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
24126 Author: Yuri Tikhonov <yur@pollux.denx.de>
24127 Date:   Mon Feb 4 14:11:03 2008 +0100
24128
24129     The patch introduces the CRITICAL feature of POST tests. If the test
24130     marked as POST_CRITICAL fails then the alternative, post_critical,
24131     boot-command is used. If this command is not defined then U-Boot
24132     enters into interactive mode.
24133
24134     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24135     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24136
24137 commit 65b20dcefc89618193fa51947968dada91e4c778
24138 Author: Yuri Tikhonov <yur@pollux.denx.de>
24139 Date:   Mon Feb 4 14:10:42 2008 +0100
24140
24141     The patch adds new POST tests for the Lwmon5 board.
24142     These are:
24143
24144     * External Watchdog test;
24145     * dsPIC tests;
24146     * FPGA test;
24147     * GDC test;
24148     * Sysmon tests.
24149
24150     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24151     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
24152
24153 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
24154 Author: Yuri Tikhonov <yur@pollux.denx.de>
24155 Date:   Mon Feb 4 14:10:01 2008 +0100
24156
24157     Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
24158
24159     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
24160
24161 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
24162 Author: Wolfgang Denk <wd@denx.de>
24163 Date:   Tue Mar 18 17:35:51 2008 +0100
24164
24165     HMI1001: fix compile problem.
24166
24167     Signed-off-by: Wolfgang Denk <wd@denx.de>
24168
24169 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
24170 Author: Mike Frysinger <vapier@gentoo.org>
24171 Date:   Mon Feb 18 05:32:30 2008 -0500
24172
24173     Blackfin: BF537-stamp: drop board-specific flash driver for CFI
24174
24175     The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
24176     for the board specific driver at all.  Just use the common CFI driver.
24177
24178     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
24179
24180 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
24181 Author: Mike Frysinger <vapier@gentoo.org>
24182 Date:   Tue Feb 19 00:36:14 2008 -0500
24183
24184     Blackfin: add proper ELF markings to some assembly functions
24185
24186     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
24187
24188 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
24189 Author: Mike Frysinger <vapier@gentoo.org>
24190 Date:   Tue Feb 19 00:35:17 2008 -0500
24191
24192     Blackfin: new cplbinfo command for viewing cplb tables
24193
24194     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
24195
24196 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
24197 Author: Mike Frysinger <vapier@gentoo.org>
24198 Date:   Mon Feb 18 05:37:51 2008 -0500
24199
24200     Blackfin: update MAINTAINERS list
24201
24202     Add maintainer information for the Blackfin boards.
24203
24204     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
24205
24206 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
24207 Author: Mike Frysinger <vapier@gentoo.org>
24208 Date:   Mon Feb 18 05:26:48 2008 -0500
24209
24210     Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
24211
24212     Stop tying things to the processor that should be tied to other defines and
24213     change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
24214     system to select the -mcpu option.
24215
24216     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
24217
24218 commit 86a20fb920bd198105acf7b1191117f566d637ed
24219 Author: Mike Frysinger <vapier@gentoo.org>
24220 Date:   Sat Feb 16 07:40:36 2008 -0500
24221
24222     Blackfin: move bootldr command to common code
24223
24224     This moves the Blackfin-common bootldr command out of the BF537-STAMP
24225     specific board directory and into the common directory so that all Blackfin
24226     boards may utilize it.
24227
24228     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
24229
24230 commit decbe029b2a9d3333d02c433389b1c821eea96d7
24231 Author: Heiko Schocher <hs@denx.de>
24232 Date:   Fri Mar 14 11:05:20 2008 +0100
24233
24234     mgcoge: update configuration
24235
24236     Fix configuration for mgcoge board
24237
24238     Signed-off-by: Heiko Schocher <hs@denx.de>
24239
24240 commit c136724cda0219c49f1d4b346f00da29b14fdf14
24241 Author: Wolfgang Denk <wd@denx.de>
24242 Date:   Sun Mar 16 01:22:59 2008 +0100
24243
24244     drivers/rtc/Makefile: keep list sorted
24245
24246     Signed-off-by: Wolfgang Denk <wd@denx.de>
24247
24248 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
24249 Author: Tor Krill <tor@excito.com>
24250 Date:   Sat Mar 15 15:40:26 2008 +0100
24251
24252     Add support for Intersil isl1208 RTC
24253
24254     Signed-off-by: Tor Krill <tor@excito.com>
24255
24256 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
24257 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24258 Date:   Sat Mar 15 17:36:41 2008 +0100
24259
24260     cramfs: Fix ifdef
24261
24262     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24263
24264 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
24265 Author: Wolfgang Denk <wd@denx.de>
24266 Date:   Sun Mar 16 01:12:58 2008 +0100
24267
24268     Conding style cleanup
24269
24270     Signed-off-by: Wolfgang Denk <wd@denx.de>
24271
24272 commit 41712b4e8c95dff23354bcd620e1f9477160c190
24273 Author: Stefan Roese <sr@denx.de>
24274 Date:   Wed Mar 5 12:31:53 2008 +0100
24275
24276     ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
24277
24278     This patch adds USB OHCI support to the Canyonlands board port. It also
24279     enables EXT2 support.
24280
24281     Signed-off-by: Stefan Roese <sr@denx.de>
24282
24283 commit 2596f5b9d353ff3e4387a3325d05740f16958038
24284 Author: Stefan Roese <sr@denx.de>
24285 Date:   Wed Mar 5 12:29:32 2008 +0100
24286
24287     usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
24288
24289     This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
24290     way a board just needs to define this new option to enable the "force
24291     NoPowerSwitching mode" instead of adding new CPU/architecture defines
24292     to the USB source itself.
24293
24294     This new option will be used first with the new AMCC 460EX Canyonlands
24295     board port, which will be posted in a few days.
24296
24297     This patch also fixes a small compilation problem when DEBUG is enabled.
24298
24299     Signed-off-by: Stefan Roese <sr@denx.de>
24300
24301 commit 71665ebf88408ff2acb762af47989fd4365b321a
24302 Author: Stefan Roese <sr@denx.de>
24303 Date:   Mon Mar 3 17:27:02 2008 +0100
24304
24305     ppc4xx: Add Canyonlands NAND booting support
24306
24307     460EX doesn't support a fixed bootstrap option to boot from 512 byte page
24308     NAND devices. The only bootstrap option for NAND booting is option F for
24309     2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
24310     EEPROM needs to be programmed accordingly.
24311
24312     This patch adds basic NAND booting support for the AMCC Canyonlands aval
24313     board and also adds support to the "bootstrap" command, to enable NAND
24314     booting I2C setting.
24315
24316     Tested with 512 byte page NAND device (32MByte) on Canyonlands.
24317
24318     Signed-off-by: Stefan Roese <sr@denx.de>
24319
24320 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
24321 Author: Stefan Roese <sr@denx.de>
24322 Date:   Tue Mar 11 16:53:00 2008 +0100
24323
24324     ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
24325
24326     This patch adds support for the AMCC Canyonlands 460EX evaluation
24327     board.
24328
24329     Signed-off-by: Stefan Roese <sr@denx.de>
24330
24331 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
24332 Author: Stefan Roese <sr@denx.de>
24333 Date:   Tue Mar 11 16:52:24 2008 +0100
24334
24335     ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
24336
24337     This patch adds support for the AMCC Canyonlands 460EX evaluation
24338     board.
24339
24340     Signed-off-by: Stefan Roese <sr@denx.de>
24341
24342 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
24343 Author: Stefan Roese <sr@denx.de>
24344 Date:   Tue Mar 11 16:51:17 2008 +0100
24345
24346     ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
24347
24348     This patch adds support for the AMCC Canyonlands 460EX evaluation
24349     board.
24350
24351     Signed-off-by: Stefan Roese <sr@denx.de>
24352
24353 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
24354 Author: Stefan Roese <sr@denx.de>
24355 Date:   Tue Mar 11 15:11:43 2008 +0100
24356
24357     ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
24358
24359     This patch adds basic support for the AMCC 460EX/460GT PPC's.
24360
24361     Signed-off-by: Stefan Roese <sr@denx.de>
24362
24363 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
24364 Author: Stefan Roese <sr@denx.de>
24365 Date:   Tue Mar 11 15:11:18 2008 +0100
24366
24367     ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
24368
24369     This patch adds basic support for the AMCC 460EX/460GT PPC's.
24370
24371     Signed-off-by: Stefan Roese <sr@denx.de>
24372
24373 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
24374 Author: Stefan Roese <sr@denx.de>
24375 Date:   Tue Mar 11 15:07:10 2008 +0100
24376
24377     ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
24378
24379     This patch adds basic support for the AMCC 460EX/460GT PPC's.
24380
24381     Signed-off-by: Stefan Roese <sr@denx.de>
24382
24383 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
24384 Author: Stefan Roese <sr@denx.de>
24385 Date:   Tue Mar 11 15:05:50 2008 +0100
24386
24387     ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
24388
24389     This patch adds basic support for the AMCC 460EX/460GT PPC's.
24390
24391     Signed-off-by: Stefan Roese <sr@denx.de>
24392
24393 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
24394 Author: Stefan Roese <sr@denx.de>
24395 Date:   Tue Mar 11 15:05:26 2008 +0100
24396
24397     ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
24398
24399     This patch adds basic support for the AMCC 460EX/460GT PPC's.
24400
24401     Signed-off-by: Stefan Roese <sr@denx.de>
24402
24403 commit 56e410178375d9f20be25fb24e180974f0ae120b
24404 Author: Stefan Roese <sr@denx.de>
24405 Date:   Tue Feb 19 22:07:57 2008 +0100
24406
24407     ppc4xx: interrupt.c reworked
24408
24409     This patch is a rework of the 4xx interrupt handling done while
24410     adding the 460EX/GT support. Interrupts are needed on 4xx for the
24411     EMAC driver.
24412
24413     Signed-off-by: Stefan Roese <sr@denx.de>
24414
24415 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
24416 Author: Stefan Roese <sr@denx.de>
24417 Date:   Tue Feb 19 22:01:57 2008 +0100
24418
24419     ppc4xx: program_tlb now uses 64bit physical addess
24420
24421     This patch changes the physical addess parameter from 32bit to 64bit.
24422     This is needed for 36bit 4xx platforms to access areas located
24423     beyond the 4GB border, like SoC peripherals (EBC etc.).
24424
24425     Signed-off-by: Stefan Roese <sr@denx.de>
24426
24427 commit c3307fa186af85771924c434997089b8104c0a46
24428 Author: Stefan Roese <sr@denx.de>
24429 Date:   Tue Feb 19 21:58:25 2008 +0100
24430
24431     ppc4xx: miiphy.c reworked
24432
24433     While adding the 460EX/GT support I reworked the 4xx miiphy code. It
24434     badly neede some cleanup.
24435
24436     Signed-off-by: Stefan Roese <sr@denx.de>
24437
24438 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
24439 Author: Stefan Roese <sr@denx.de>
24440 Date:   Tue Feb 19 16:21:49 2008 +0100
24441
24442     rtc: Add M41T62 support
24443
24444     This patch add support for the STM M41T62 RTC. It is used and tested
24445     on the AMCC Canyonlands 406EX platform.
24446
24447     Signed-off-by: Stefan Roese <sr@denx.de>
24448
24449 commit 217d383e201adc7f2271145ae345ea5eae2b7170
24450 Author: Niklaus Giger <niklaus.giger@netstal.com>
24451 Date:   Mon Feb 25 18:46:43 2008 +0100
24452
24453     ppc4xx: Add 405GPr based MCU25 board specific files
24454
24455     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24456
24457 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
24458 Author: Niklaus Giger <niklaus.giger@netstal.com>
24459 Date:   Mon Feb 25 18:46:42 2008 +0100
24460
24461     ppc4xx: Add 405GPr based MCU25 board config file
24462
24463     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24464
24465 commit b05f35436b733a240559e77e46bed8439665ecc5
24466 Author: Niklaus Giger <niklaus.giger@netstal.com>
24467 Date:   Mon Feb 25 18:46:41 2008 +0100
24468
24469     ppc4xx: Add 405GPr based MCU25 board. Global files
24470
24471     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24472
24473 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
24474 Author: Niklaus Giger <niklaus.giger@netstal.com>
24475 Date:   Mon Feb 25 18:37:02 2008 +0100
24476
24477     ppc4xx: HCU4/5. remove obsolete hcu_flash.c
24478
24479     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24480
24481 commit a079494853cc2bfeddb26673219db0b4b2b31566
24482 Author: Niklaus Giger <niklaus.giger@netstal.com>
24483 Date:   Mon Feb 25 18:37:01 2008 +0100
24484
24485     ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
24486
24487     Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
24488     the FLASH_CFI_LEGACY et al. config options.
24489
24490     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24491
24492 commit e4170e5a50c8110f792bc37472833ae669d69951
24493 Author: Stefan Roese <sr@denx.de>
24494 Date:   Tue Mar 11 13:52:25 2008 +0100
24495
24496     ppc4xx: Fix comment in 405EX DDR2 init code
24497
24498     Signed-off-by: Stefan Roese <sr@denx.de>
24499
24500 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
24501 Author: Bartlomiej Sieka <tur@semihalf.com>
24502 Date:   Fri Mar 14 16:22:34 2008 +0100
24503
24504     Add MD5 support to the new uImage format
24505
24506     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
24507
24508 commit 0ede0c383530a418cf98be9122371a86573cd0db
24509 Author: Bartlomiej Sieka <tur@semihalf.com>
24510 Date:   Fri Mar 14 16:22:34 2008 +0100
24511
24512     Add the MD5 algorithm
24513
24514     MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
24515     calculated using the md5() function -- see include/md5.h for details.
24516
24517     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
24518
24519 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
24520 Author: Wolfgang Denk <wd@denx.de>
24521 Date:   Fri Mar 14 16:04:54 2008 +0100
24522
24523     tools/setlocalversion: use a git-describe-ish format
24524
24525     Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
24526     where 'nnnnn' is the number of commits since the last tag (i.e.,
24527     1.3.2-rc3).  This makes it much easier to recognize "newer" versions
24528     and to see how much has been changed since the referenced tag.
24529
24530     Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
24531
24532     Signed-off-by: Wolfgang Denk <wd@denx.de>
24533
24534 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
24535 Author: Wolfgang Denk <wd@denx.de>
24536 Date:   Thu Mar 13 14:32:03 2008 +0100
24537
24538     HMI1001: add support for MPC5200 Rev. B processors.
24539
24540     Signed-off-by: Wolfgang Denk <wd@denx.de>
24541
24542 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
24543 Author: Wolfgang Denk <wd@denx.de>
24544 Date:   Thu Mar 13 14:29:49 2008 +0100
24545
24546     TQM5200: remove dead code
24547
24548     This board never used a MGT5100 processor.
24549
24550     Signed-off-by: Wolfgang Denk <wd@denx.de>
24551
24552 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
24553 Author: Marian Balakowicz <m8@semihalf.com>
24554 Date:   Wed Mar 12 12:14:15 2008 +0100
24555
24556     [new uImage] Fix build issue on ARM
24557
24558     ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
24559
24560     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24561
24562 commit 3310c549a73a949430bfda90876df7552a1dab0c
24563 Author: Marian Balakowicz <m8@semihalf.com>
24564 Date:   Wed Mar 12 12:13:13 2008 +0100
24565
24566     [new uImage] Add new uImage format documentation and examples
24567
24568     Create doc/uImage.FIT documentation directory with the following files:
24569     - command_syntax_extensions.txt : extended command syntax description
24570     - howto.txt                     : short usage howto
24571     - source_file_format.txt        : internal new uImage format description
24572
24573     Add example image source files:
24574     - kernel.its
24575     - kernel_fdt.its
24576     - multi.its
24577
24578     Update README appropriately.
24579
24580     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24581     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
24582
24583 commit 1ec73761d2e247078f4520a265d463e8b73391a2
24584 Author: Marian Balakowicz <m8@semihalf.com>
24585 Date:   Wed Mar 12 10:35:52 2008 +0100
24586
24587     [new uImage] Fix definition of common bootm_headers_t fields
24588
24589     verify, autostart and lmb fields are used regardless of CONFIG_FIT
24590     setting, move their definitions to common section.
24591
24592     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24593
24594 commit 1d1cb4270edc6a99276834064069717f9782c491
24595 Author: Marian Balakowicz <m8@semihalf.com>
24596 Date:   Wed Mar 12 10:35:51 2008 +0100
24597
24598     [new uImage] Fix build problems on trab board
24599
24600     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24601
24602 commit f773bea8e11f4a11c388dcee956b2444203e6b65
24603 Author: Marian Balakowicz <m8@semihalf.com>
24604 Date:   Wed Mar 12 10:35:46 2008 +0100
24605
24606     [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
24607
24608     Save FIT configuration provied in the first bootm argument and use it
24609     when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
24610     arguments are not specified.
24611
24612     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24613
24614 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
24615 Author: Marian Balakowicz <m8@semihalf.com>
24616 Date:   Wed Mar 12 10:33:01 2008 +0100
24617
24618     [new uImage] More verbose kernel image uncompress error message
24619
24620     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24621
24622 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
24623 Author: Marian Balakowicz <m8@semihalf.com>
24624 Date:   Wed Mar 12 10:33:01 2008 +0100
24625
24626     [new uImage] Use show_boot_progress() for new uImage format
24627
24628     This patch allocates a set of show_boot_progress() IDs for new uImage format
24629     and adds show_boot_progress() calls in new uImage format handling code.
24630
24631     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24632
24633 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
24634 Author: Marian Balakowicz <m8@semihalf.com>
24635 Date:   Wed Mar 12 10:33:01 2008 +0100
24636
24637     [new uImage] Add new uImage fromat support to fpga command
24638
24639     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24640
24641 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
24642 Author: Marian Balakowicz <m8@semihalf.com>
24643 Date:   Wed Mar 12 10:33:01 2008 +0100
24644
24645     [new uImage] Add new uImage format handling to other bootm related commands
24646
24647     Updated commands:
24648
24649     docboot  - cmd_doc.c
24650     fdcboot  - cmd_fdc.c
24651     diskboot - cmd_ide.c
24652     nboot    - cmd_nand.c
24653     scsiboot - cmd_scsi.c
24654     usbboot  - cmd_usb.c
24655
24656     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24657
24658 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
24659 Author: Marian Balakowicz <m8@semihalf.com>
24660 Date:   Wed Mar 12 10:33:00 2008 +0100
24661
24662     [new uImage] Add new uImage format support to imgextract command
24663
24664     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24665
24666 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
24667 Author: Marian Balakowicz <m8@semihalf.com>
24668 Date:   Wed Mar 12 10:33:00 2008 +0100
24669
24670     [new uImage] Add new uImage format support to autoscript routine
24671
24672     autoscript() routine is updated to accept second argument, which
24673     is only used for FIT images and provides a FIT subimage unit name.
24674
24675     autoscript() routine callers must now pass two arguments. For
24676     non-interactive use (like in cmd_load.c, cmd_net.c), new environment
24677     variable 'autoscript_uname' is introduced and used as a FIT
24678     subimage unit name source.
24679
24680     autoscript command accepts extended syntax of the addr argument:
24681     addr:<subimg_uname>
24682
24683     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24684
24685 commit cd7c596e9f561dbbc17b717277438aee78cde14f
24686 Author: Marian Balakowicz <m8@semihalf.com>
24687 Date:   Wed Mar 12 10:33:00 2008 +0100
24688
24689     [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
24690
24691     This patch updates architecture specific implementations of
24692     do_bootm_linux() adding new uImage format handling for
24693     operations like get kernel entry point address, get kernel
24694     image data start address.
24695
24696     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24697
24698 commit 3dfe110149311425919e6d6a14b561b4207498f1
24699 Author: Marian Balakowicz <m8@semihalf.com>
24700 Date:   Wed Mar 12 10:32:59 2008 +0100
24701
24702     [new uImage] Add node offsets for FIT images listed in struct bootm_headers
24703
24704     This patch adds new node offset fields to struct bootm_headers
24705     and updates bootm_headers processing code to make use of them.
24706     Saved node offsets allow to avoid repeating fit_image_get_node() calls.
24707
24708     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24709
24710 commit bc8ed486b125452ba3bd8344f052f437329150c5
24711 Author: Marian Balakowicz <m8@semihalf.com>
24712 Date:   Wed Mar 12 10:32:53 2008 +0100
24713
24714     [new uImage] ppc: Add new uImage format support to FDT handling routines
24715
24716     Support for new (FIT) format uImages is added to powerpc specific
24717     boot_get_fdt() routine which now recognizes, sanity checks FIT image
24718     and is able to access data sections of the requested component image.
24719
24720     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24721
24722 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
24723 Author: Marian Balakowicz <m8@semihalf.com>
24724 Date:   Wed Mar 12 10:14:57 2008 +0100
24725
24726     [new uImage] Re-enable interrupts for non automatic booting
24727
24728     Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
24729     environment variable is not set to 'yes'.
24730
24731     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24732
24733 commit d985c8498c4e47095820da97aa722381d39172c5
24734 Author: Marian Balakowicz <m8@semihalf.com>
24735 Date:   Wed Mar 12 10:14:38 2008 +0100
24736
24737     [new uImage] Remove unnecessary arguments passed to ramdisk routines
24738
24739     boot_get_ramdisk() and image_get_ramdisk() do not need all
24740     cmdtp, flag, argc and argv arguments. Simplify routines definition.
24741
24742     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24743
24744 commit c87796483bc7c2900470dc747c367f602577608d
24745 Author: Marian Balakowicz <m8@semihalf.com>
24746 Date:   Wed Mar 12 10:12:37 2008 +0100
24747
24748     [new uImage] Add new uImage format support for ramdisk handling
24749
24750     This patch updates boot_get_ramdisk() routine adding format
24751     verification and handling for new (FIT) uImages.
24752
24753     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24754
24755 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
24756 Author: Marian Balakowicz <m8@semihalf.com>
24757 Date:   Wed Mar 12 10:01:05 2008 +0100
24758
24759     [new uImage] Add new uImage format support for kernel booting
24760
24761     New format uImages are recognized by the bootm command,
24762     validity of specified kernel component image is checked and
24763     its data section located and used for further processing
24764     (uncompress, load, etc.)
24765
24766     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24767
24768 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
24769 Author: Marian Balakowicz <m8@semihalf.com>
24770 Date:   Tue Mar 11 12:35:20 2008 +0100
24771
24772     [new uImage] Add new uImage format support for imls and iminfo commands
24773
24774     imls and iminfo can now recognize nad print out contents of the new (FIT)
24775     format uImages.
24776
24777     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24778
24779 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
24780 Author: Bartlomiej Sieka <tur@semihalf.com>
24781 Date:   Tue Mar 11 12:34:47 2008 +0100
24782
24783     [new uImage] Add support for new uImage format to mkimage tool
24784
24785     Support for the new uImage format (FIT) is added to mkimage tool.
24786     Commandline syntax is appropriately extended:
24787
24788     mkimage [-D dtc_options] -f fit-image.its fit-image
24789
24790     mkimage (together with dtc) takes fit-image.its and referenced therein
24791     binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
24792     final image that can be transferred to the target (e.g., via tftp) and then
24793     booted using the bootm command in U-Boot.
24794
24795     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
24796
24797 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
24798 Author: Marian Balakowicz <m8@semihalf.com>
24799 Date:   Mon Mar 10 17:53:49 2008 +0100
24800
24801     [new uImage] Make node unit names const in struct bootm_headers
24802
24803     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24804
24805 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
24806 Author: Marian Balakowicz <m8@semihalf.com>
24807 Date:   Fri Feb 29 21:24:06 2008 +0100
24808
24809     [new uImage] New uImage low-level API
24810
24811     Add FDT-based functions for handling new format component images,
24812     configurations, node operations, property get/set, etc.
24813
24814     fit_        - routines handling global new format uImage operations
24815                   like get/set top level property, process all nodes, etc.
24816     fit_image_  - routines handling component images subnodes
24817     fit_conf_   - routines handling configurations node
24818
24819     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
24820     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
24821
24822 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
24823 Author: Wolfgang Denk <wd@denx.de>
24824 Date:   Sun Mar 9 16:20:02 2008 +0100
24825
24826     Release v1.3.2
24827
24828     Update CHANGELOG for release.
24829
24830     Signed-off-by: Wolfgang Denk <wd@denx.de>
24831
24832 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
24833 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24834 Date:   Sun Mar 9 14:52:11 2008 +0100
24835
24836     SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
24837
24838     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24839     Signed-off-by: Wolfgang Denk <wd@denx.de>
24840
24841 commit db695b78515ddb88a2d4f3357c120345efbf59ec
24842 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24843 Date:   Sun Mar 9 10:44:01 2008 +0100
24844
24845     scb9328: Fix flash warning: type qualifiers ignored on function return type
24846
24847     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24848
24849 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
24850 Author: Wolfgang Denk <wd@denx.de>
24851 Date:   Sun Mar 9 10:50:41 2008 +0100
24852
24853     esd/common/fpga.c: fix indentation.
24854
24855     Signed-off-by: Wolfgang Denk <wd@denx.de>
24856
24857 commit cc3843e36453e2b8db65d7e56de938ba045016a0
24858 Author: Wolfgang Denk <wd@denx.de>
24859 Date:   Sun Mar 9 10:33:31 2008 +0100
24860
24861     common/kgdb.c: fix 'dereferencing type-punned pointer' warning
24862
24863     and get rid of a couple of unneeded casts.
24864
24865     Signed-off-by: Wolfgang Denk <wd@denx.de>
24866
24867 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
24868 Author: Wolfgang Denk <wd@denx.de>
24869 Date:   Sun Mar 9 10:09:53 2008 +0100
24870
24871     esd/common/fpga.c: fix 'assignment of read-only location' error
24872
24873     Signed-off-by: Wolfgang Denk <wd@denx.de>
24874
24875 commit c6fe4dabac066e8758345d249032768496983a3e
24876 Author: Wolfgang Denk <wd@denx.de>
24877 Date:   Sun Mar 9 02:13:19 2008 +0100
24878
24879     Makefile: make build silently again.
24880
24881     Signed-off-by: Wolfgang Denk <wd@denx.de>
24882
24883 commit 76babc86576f092573599334c85ec543fdbc6015
24884 Author: Wolfgang Denk <wd@denx.de>
24885 Date:   Sun Mar 9 02:07:49 2008 +0100
24886
24887     m501sk: Fix out of tree building
24888
24889     Signed-off-by: Wolfgang Denk <wd@denx.de>
24890
24891 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
24892 Author: Wolfgang Denk <wd@denx.de>
24893 Date:   Sun Mar 9 00:06:09 2008 +0100
24894
24895     ADS5121: fix out of tree build
24896
24897     and simplify Makefile a bit.
24898
24899     Signed-off-by: Wolfgang Denk <wd@denx.de>
24900
24901 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
24902 Author: Wolfgang Denk <wd@denx.de>
24903 Date:   Sat Mar 8 22:35:31 2008 +0100
24904
24905     Release v1.3.2
24906
24907     Signed-off-by: Wolfgang Denk <wd@denx.de>
24908
24909 commit 78a90f827df74520e939c794fc7413dace21c4db
24910 Author: Wolfgang Denk <wd@denx.de>
24911 Date:   Sat Mar 8 22:35:04 2008 +0100
24912
24913     Update CHANGELOG
24914
24915     Signed-off-by: Wolfgang Denk <wd@denx.de>
24916
24917 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
24918 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24919 Date:   Sat Mar 8 21:30:04 2008 +0100
24920
24921     esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
24922
24923     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24924
24925 commit d75469d48c05795144f4b8ba76addbb4920a7bba
24926 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24927 Date:   Sat Mar 8 09:25:49 2008 +0900
24928
24929     net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
24930
24931     When rtl_recv() of rtl8169 is called, OWNbit of status register
24932     is not enable occasionally.
24933     rtl_recv() doesn't work normally when the driver doesn't do
24934     appropriate processing.
24935     This patch fix this problem.
24936
24937     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24938
24939 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
24940 Author: Heiko Schocher <hs@denx.de>
24941 Date:   Fri Mar 7 08:15:28 2008 +0100
24942
24943     mgsuvd: update board configuration
24944
24945     initialize the UPIOx controller.
24946
24947     Signed-off-by: Heiko Schocher <hs@denx.de>
24948
24949 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
24950 Author: Heiko Schocher <hs@denx.de>
24951 Date:   Fri Mar 7 08:13:41 2008 +0100
24952
24953     mgcoge: update board configuration
24954
24955     add support for the config Flash.
24956     initialize the UPIOx controller.
24957
24958     Signed-off-by: Heiko Schocher <hs@denx.de>
24959
24960 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
24961 Author: Kim Phillips <kim.phillips@freescale.com>
24962 Date:   Fri Mar 7 12:27:31 2008 -0600
24963
24964     mpc83xx: make dtb basename file references equal those of linux
24965
24966     the dts file basenames were updated in linux - this helps avoid
24967     inadvertently loading any old dtbs laying around.
24968
24969     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24970
24971 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
24972 Author: Kim Phillips <kim.phillips@freescale.com>
24973 Date:   Wed Feb 27 16:08:22 2008 -0600
24974
24975     net: uec_phy: actually increment the timeout counter
24976
24977     allow u-boot to recover (and, e.g., switch to another interface) in the
24978     case where a PHY does not report autonegotiation is complete within its
24979     two second timeout value.
24980
24981     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24982
24983 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
24984 Author: Markus Brunner <super.firetwister@googlemail.com>
24985 Date:   Wed Mar 5 21:38:12 2008 +0100
24986
24987     fix taihu soft spi_read
24988
24989     The taihu board used gpio_read_out_bit which reads the output register and not
24990     the pin state.
24991
24992     Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
24993
24994 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
24995 Author: Stefan Roese <sr@denx.de>
24996 Date:   Fri Mar 7 08:01:43 2008 +0100
24997
24998     ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
24999
25000     Signed-off-by: Stefan Roese <sr@denx.de>
25001
25002 commit bd4458cb47abecabd406b1210457be96c69fc49d
25003 Author: Dave Liu <r63238@freescale.com>
25004 Date:   Tue Mar 4 16:59:22 2008 +0800
25005
25006     837xEMDS: Improve the system performance
25007
25008     1. Make the CSB bus pipeline depth as 4, and enable
25009        the repeat mode;
25010     2. Raise the eTSEC emergency priority;
25011     3. Use the highest IP blocks clock.
25012
25013     Signed-off-by: Dave Liu <daveliu@freescale.com>
25014
25015 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
25016 Author: Detlev Zundel <dzu@denx.de>
25017 Date:   Thu Mar 6 16:45:53 2008 +0100
25018
25019     Replace "run load; run update" with conditionalized "run load update".
25020
25021     The latter version stops when "run load" fails for whatever reasons
25022     rendering the combination *a lot* more secure.
25023
25024     Signed-off-by: Detlev Zundel <dzu@denx.de>
25025
25026 commit 6bc113886d7d316df1a4e459bec8baf027518551
25027 Author: Stefan Roese <sr@denx.de>
25028 Date:   Tue Mar 4 17:40:41 2008 +0100
25029
25030     net: Print error message upon net usage when no ethernet-interface is found
25031
25032     This patch fixes a problem seen on PPC4xx boards, when no MAC address is
25033     defined. Then no ethernet interface is available but a simple "tftp"
25034     command will return without any error message which is quite confusing.
25035
25036     Signed-off-by: Stefan Roese <sr@denx.de>
25037
25038 commit a30a549a3553032d809e0356306b62de0b125901
25039 Author: Jon Loeliger <jdl@freescale.com>
25040 Date:   Tue Mar 4 10:03:03 2008 -0600
25041
25042     Remove erroneous or extra spd.h #includers.
25043
25044     Many of the spd.h #includers don't need it,
25045     and wanted to have spd_sdram() declared instead.
25046     Since they didn't get that, some also had open
25047     coded extern declarations of it instead or as well.
25048     Fix it all up by using spd_sdram.h where needed.
25049
25050     Signed-off-by: Jon Loeliger <jdl@freescale.com>
25051
25052 commit a4475386cef14af3fd88f0518b688e755669486d
25053 Author: Wolfgang Denk <wd@denx.de>
25054 Date:   Tue Mar 4 17:41:28 2008 +0100
25055
25056     PCS440EP: fix build problems (redundant #define)
25057
25058     Signed-off-by: Wolfgang Denk <wd@denx.de>
25059
25060 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
25061 Author: Stefan Roese <sr@denx.de>
25062 Date:   Tue Mar 4 17:39:25 2008 +0100
25063
25064     net: Print error message upon net usage when no ethernet-interface is found
25065
25066     This patch fixes a problem seen on PPC4xx boards, when no MAC address is
25067     defined. Then no ethernet interface is available but a simple "tftp"
25068     command will return without any error message which is quite confusing.
25069
25070     Signed-off-by: Stefan Roese <sr@denx.de>
25071
25072 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
25073 Author: Wolfgang Denk <wd@denx.de>
25074 Date:   Tue Mar 4 17:38:50 2008 +0100
25075
25076     W7OLMC/W7OLMG: fix build problems (redundant #define)
25077
25078     Signed-off-by: Wolfgang Denk <wd@denx.de>
25079
25080 commit f9301e1cda296245ba052d7b08321199c3d0af9d
25081 Author: Wolfgang Denk <wd@denx.de>
25082 Date:   Tue Mar 4 14:58:31 2008 +0100
25083
25084     Makefile: fix problem with out-of-tree builds introduced by 5013c09f
25085
25086     Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
25087     problem for out-of-tree builds which caused "make clean" to fail.
25088
25089     Signed-off-by: Wolfgang Denk <wd@denx.de>
25090
25091 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
25092 Author: Wolfgang Denk <wd@denx.de>
25093 Date:   Tue Mar 4 11:58:26 2008 +0100
25094
25095     examples/Makefile: build "hello_world" on 8xx, too.
25096
25097     Signed-off-by: Wolfgang Denk <wd@denx.de>
25098
25099 commit 74eb0222594fd23aafdf168e60e872814eea8b62
25100 Author: Mike Nuss <mike@terascala.com>
25101 Date:   Mon Mar 3 15:27:05 2008 -0500
25102
25103     PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
25104
25105     Every now and then a Sequoia board (or equivalent hardware) had
25106     problems connecting to a Gigabit capable network interface.
25107
25108     There were differences in the PHY setup between Linux and U-Boot.
25109
25110     This patch fixes the problem. Apparently "remote fault" is being set,
25111     which signals to some devices (on the other end of the cable) that a
25112     fault has occurred, while other devices ignore it. I believe the RF bit
25113     was causing the issue, but I removed T4 also, to match up with Linux.
25114
25115     Signed-off-by: Mike Nuss <mike@terascala.com>
25116
25117 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
25118 Author: Timur Tabi <timur@freescale.com>
25119 Date:   Mon Mar 3 09:58:52 2008 -0600
25120
25121     fix QE firmware uploading limit
25122
25123     Fix a typo in qe_upload_firmware() that prevented uploading firmware on
25124     systems with more than one RISC core.
25125
25126     Signed-off-by: Timur Tabi <timur@freescale.com>
25127
25128 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
25129 Author: Bernhard Nemec <bnemec@ganssloser.com>
25130 Date:   Mon Mar 3 11:57:23 2008 +0000
25131
25132     Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
25133
25134     Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
25135     see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
25136
25137     Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
25138
25139 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
25140 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
25141 Date:   Mon Mar 3 10:39:13 2008 +0200
25142
25143     fix copy from ram to dataflash
25144
25145     If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
25146     routines instead of dataflash. This is because it checks "if source
25147     address is not dataflash" instead of target address.
25148
25149     Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
25150
25151 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
25152 Author: Wolfgang Denk <wd@denx.de>
25153 Date:   Mon Mar 3 12:16:44 2008 +0100
25154
25155     Fix quoting problem (preboot setting) in many board config files.
25156
25157     Signed-off-by: Wolfgang Denk <wd@denx.de>
25158
25159 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
25160 Author: Wolfgang Denk <wd@denx.de>
25161 Date:   Mon Mar 3 12:36:49 2008 +0100
25162
25163     ADS5121: Fix default environment.
25164
25165     Signed-off-by: Wolfgang Denk <wd@denx.de>
25166
25167 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
25168 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25169 Date:   Sun Mar 2 16:12:31 2008 +0100
25170
25171     Makefile: Fix missing unconfig and mkconfig use
25172
25173     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25174
25175 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
25176 Author: michael <trimarchi@gandalf.sssup.it>
25177 Date:   Sun Mar 2 23:33:46 2008 +0100
25178
25179     Fix checking fat32 cluster size.
25180
25181     This fixes the cluster size tests in the FAT32 file system.
25182     The current implementation of VFAT support doesn't work if the
25183     referred cluster has an offset > 16bit representation, causing
25184     "fatload" and "fatls" commands etc. to fail.
25185
25186     Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
25187
25188 commit 661bad63a076a96c39c64f136915f146725af92b
25189 Author: Wolfgang Denk <wd@denx.de>
25190 Date:   Sun Mar 2 22:57:23 2008 +0100
25191
25192     Prepare v1.3.2-rc2 release candidate
25193
25194     Signed-off-by: Wolfgang Denk <wd@denx.de>
25195
25196 commit 76957cb3d621bf664311908e5962e151c633c285
25197 Author: Stefan Roese <sr@denx.de>
25198 Date:   Sat Mar 1 12:11:40 2008 +0100
25199
25200     ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
25201
25202     The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
25203     currently 4k/2k is configured. This patch fixes this issue.
25204
25205     Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
25206
25207     Signed-off-by: Stefan Roese <sr@denx.de>
25208
25209 commit 118978c8eb43803e2794233922df4249fa278b83
25210 Author: Woodruff, Richard <r-woodruff2@ti.com>
25211 Date:   Fri Feb 29 17:34:35 2008 -0600
25212
25213     Fix alignment error on ARM for modules
25214
25215     Fix alignment fault on ARM when running modules.  With out an explicit
25216     linker file gcc4.2.1 will half word align __bss_start's value.  The word
25217     dereference will crash hello_world.
25218
25219     signed-off-by Richard Woodruff <r-woodruff2@ti.com>
25220
25221 commit ce1120dd703e6f12c59e4eba9962356a0300b832
25222 Author: Dave Liu <r63238@freescale.com>
25223 Date:   Fri Feb 29 17:45:31 2008 +0800
25224
25225     fs: Fix ext2 read issue
25226
25227     The ext2 aligned process will corrupt the key
25228     data struct, the patch fix this.
25229
25230     Signed-off-by: Dave Liu <daveliu@freescale.com>
25231
25232 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
25233 Author: Wolfgang Denk <wd@denx.de>
25234 Date:   Sun Mar 2 22:45:33 2008 +0100
25235
25236     Makefile: cleanup "clean" target
25237
25238     Make sure CDPATH settings cannot interfere.
25239     Update CHANGELOG.
25240
25241     Signed-off-by: Wolfgang Denk <wd@denx.de>
25242
25243 commit ffda586fc1373243c9794babde69500f6293a8d8
25244 Author: Li Yang <leoli@freescale.com>
25245 Date:   Fri Feb 29 11:46:05 2008 +0800
25246
25247     add cscope build target
25248
25249     Add cscope build target to generate cscope database for code browsing.
25250
25251     Signed-off-by: Li Yang <leoli@freescale.com>
25252
25253 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
25254 Author: Kim Phillips <kim.phillips@freescale.com>
25255 Date:   Wed Feb 27 15:06:39 2008 -0600
25256
25257     net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
25258
25259     erratum 5.6 states the autoneg completion bit is functional only if the
25260     autoneg bit is asserted.
25261
25262     This fixes any secondarily-issued networking commands on non-gigabit
25263     links on the mpc8360 mds board.
25264
25265     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25266
25267 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
25268 Author: John Rigby <jrigby@freescale.com>
25269 Date:   Tue Feb 26 09:38:14 2008 -0700
25270
25271     MPC5121e ADS PCI support take 3
25272
25273     Adds PCI support for MPC5121
25274
25275     Tested with drivers/net/rtl8139.c
25276
25277     Support is conditional since PCI on old silicon does not work.
25278
25279     ads5121_PCI_config turns on PCI
25280
25281     In this version, condition compilation of PCI code has been moved
25282     from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
25283     suggested by Jean-Christophe PLAGNIOL-VILLARD
25284
25285     Signed-off-by: John Rigby <jrigby@freescale.com>
25286
25287 commit 44b4dbed4133f657705b7c5193209da9978243a7
25288 Author: Anatolij Gustschin <agust@denx.de>
25289 Date:   Mon Feb 25 23:53:07 2008 +0100
25290
25291     Fix warnings while compilation of post/drivers/memory.c
25292
25293     Fix warnings while compilation with new gcc in eldk-4.2
25294
25295     Signed-off-by: Anatolij Gustschin <agust@denx.de>
25296
25297 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
25298 Author: Anatolij Gustschin <agust@denx.de>
25299 Date:   Mon Feb 25 20:54:04 2008 +0100
25300
25301     ppc4xx: Fix problem in 4xx_enet.c driver
25302
25303     U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
25304     enabled. To reproduce the problem ensure that 'ethrotate'
25305     environment variable isn't set to "no" and then run
25306     "tftp 200000 not_existent_file".
25307     This patch tries to fix the issue.
25308
25309     Signed-off-by: Anatolij Gustschin <agust@denx.de>
25310
25311 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
25312 Author: Anatolij Gustschin <agust@denx.de>
25313 Date:   Mon Feb 25 20:04:20 2008 +0100
25314
25315     POST: Disable cache while SPR POST
25316
25317     Currently (since commit b2e2142c) u-boot crashes on
25318     sequoia board while SPR test if CONFIG_4xx_DCACHE is
25319     enabled. This patch disables the cache while SPR test.
25320
25321     Signed-off-by: Anatolij Gustschin <agust@denx.de>
25322
25323 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
25324 Author: Martin Krause <martin.krause@tqs.de>
25325 Date:   Mon Feb 25 17:52:40 2008 +0100
25326
25327     TQM5200: use automatic fdt memory fixup (part 2)
25328
25329     Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
25330     TB5200 and TB5200_B to fixup the /memory node with the memory values
25331     detected by U-Boot.
25332
25333     Signed-off-by: Martin Krause <martin.krause@tqs.de>
25334
25335 commit 44ceec253ea941b301abf4b079d52324def69d92
25336 Author: Martin Krause <martin.krause@tqs.de>
25337 Date:   Mon Feb 25 15:17:05 2008 +0100
25338
25339     TQM5200: use automatic fdt memory fixup
25340
25341     Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
25342     TB5200 and TB5200_B to fixup the /memory node with the memory values
25343     detected by U-Boot.
25344
25345     Signed-off-by: Martin Krause <martin.krause@tqs.de>
25346
25347 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
25348 Author: Martin Krause <martin.krause@tqs.de>
25349 Date:   Mon Feb 25 13:27:52 2008 +0100
25350
25351     TQM5200: fix bug in SDRAM initialization code
25352
25353     This patch fixes a bug in the SDRAM initialization code for the
25354     TQM5200. The hi_addr bit is now set correctly. Without this patch
25355     the hi_addr bit is always set to 1, if the second SDRAM bank is
25356     not populated.
25357
25358     For other MPC5200 boards a correspondig patch has already been applied
25359     some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
25360
25361     Signed-off-by: Martin Krause <martin.krause@tqs.de>
25362     --
25363     Forget the first patch please. I confused flash with SDRAM in
25364     the comment ...
25365
25366 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
25367 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25368 Date:   Mon Feb 25 00:03:12 2008 +0100
25369
25370     mx1fs2/flash: Fix multiple compiler warnings
25371
25372     "pointer targets in assignment differ in signedness"
25373
25374     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25375
25376 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
25377 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25378 Date:   Mon Feb 25 00:03:11 2008 +0100
25379
25380     arm-imx: Fix register definitions
25381
25382     Sync register definitions with linux
25383
25384     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25385
25386 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
25387 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25388 Date:   Mon Feb 25 00:03:10 2008 +0100
25389
25390     actua1/actua2/actua3: Fix multiple unused variable warnings
25391
25392     - actua1:
25393         actux1.c: In function 'checkboard':
25394         actux1.c:92: warning: unused variable 'revision'
25395
25396     - actua2:
25397         actux2.c: In function 'checkboard':
25398         actux2.c:100: warning: unused variable 's'
25399         actux2.c:99: warning: unused variable 'revision'
25400         actux2.c: In function 'reset_phy':
25401         actux2.c:130: warning: unused variable 'i'
25402
25403     - actua3:
25404         actux3.c: In function 'checkboard':
25405         actux3.c:114: warning: unused variable 'revision'
25406
25407     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25408
25409 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
25410 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25411 Date:   Sun Feb 24 11:44:29 2008 +0900
25412
25413     Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
25414
25415     The previous patch was lacking of i386, microblaze, nios and nios2. This
25416     patch tries to fix them.
25417
25418     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25419
25420 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
25421 Author: Marian Balakowicz <m8@semihalf.com>
25422 Date:   Fri Feb 29 22:22:46 2008 +0100
25423
25424     [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
25425
25426     Do not use global fdt blob pointer, calculate blob size from routine
25427     argument blob pointer.
25428
25429     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25430
25431 commit d1cc52879c8966507dad9fb575481e6d3985e64e
25432 Author: David Gibson <david@gibson.dropbear.id.au>
25433 Date:   Tue Feb 12 00:58:31 2008 +1100
25434
25435     libfdt: Add and use a node iteration helper function.
25436
25437     This patch adds an fdt_next_node() function which can be used to
25438     iterate through nodes of the tree while keeping track of depth.  This
25439     function is used to simplify the iteration code in a lot of other
25440     functions, and is also exported for use by library users.
25441
25442     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
25443
25444 commit 8cf30809a82902a471866d2f07725ce3b8a22291
25445 Author: Bartlomiej Sieka <tur@semihalf.com>
25446 Date:   Fri Feb 29 16:00:24 2008 +0100
25447
25448     [new uImage] Add libfdt support to mkimage
25449
25450     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
25451
25452 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
25453 Author: Bartlomiej Sieka <tur@semihalf.com>
25454 Date:   Fri Feb 29 16:00:23 2008 +0100
25455
25456     [new uImage] Add sha1.o object to mkimage binary build
25457
25458     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
25459
25460 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
25461 Author: Marian Balakowicz <m8@semihalf.com>
25462 Date:   Fri Feb 29 16:00:06 2008 +0100
25463
25464     [new uImage] Fix component handling for legacy multi component images
25465
25466     Use uint32_t when accessing size table in image_multi_count() and
25467     image_multi_getimg() for multi component images.
25468
25469     Add missing uimage_to_cpu() endianness conversion.
25470
25471     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25472
25473 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
25474 Author: Marian Balakowicz <m8@semihalf.com>
25475 Date:   Fri Feb 29 15:59:59 2008 +0100
25476
25477     [new uImage] Share common uImage code between mkimage and U-boot
25478
25479     This patch adds the following common routines:
25480
25481     1) Dedicated mkimage print_header() is replaced with common
25482     image_print_contents()
25483     image_print_contents_noindent()
25484
25485     2) Common os/arch/type/comp fields name <--> id translation routines
25486     genimg_get_os_name()
25487     genimg_get_arch_name()
25488     genimg_get_type_name()
25489     genimg_get_comp_name()
25490     genimg_get_os_id()
25491     genimg_get_arch_id()
25492     genimg_get_type_id()
25493     genimg_get_comp_id()
25494
25495     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25496
25497 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
25498 Author: Marian Balakowicz <m8@semihalf.com>
25499 Date:   Fri Feb 29 14:58:34 2008 +0100
25500
25501     [new uImage] Update naming convention for bootm/uImage related code
25502
25503     This patch introduces the following prefix convention for the
25504     image format handling and bootm related code:
25505
25506     genimg_             - dual format shared code
25507     image_              - legacy uImage format specific code
25508     fit_                - new uImage format specific code
25509     boot_               - booting process related code
25510
25511     Related routines are renamed and a few pieces of code are moved around and
25512     re-grouped.
25513
25514     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25515
25516 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
25517 Author: Kumar Gala <galak@kernel.crashing.org>
25518 Date:   Wed Feb 27 21:51:51 2008 -0600
25519
25520     [new uImage] Respect autostart setting in linux bootm
25521
25522     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25523     Acked-by: Marian Balakowicz <m8@semihalf.com>
25524
25525 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
25526 Author: Kumar Gala <galak@kernel.crashing.org>
25527 Date:   Wed Feb 27 21:51:50 2008 -0600
25528
25529     [new uImage] Provide ability to restrict region used for boot images
25530
25531     Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
25532     to restrict what memory range is used for bootm.
25533
25534     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25535     Acked-by: Marian Balakowicz <m8@semihalf.com>
25536
25537 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
25538 Author: Kumar Gala <galak@kernel.crashing.org>
25539 Date:   Wed Feb 27 21:51:49 2008 -0600
25540
25541     [new uImage] Use lmb for bootm allocations
25542
25543     Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
25544     functions over to using lmb for allocation of the ramdisk, command line
25545     and kernel bd info.
25546
25547     Convert PPC specific fdt_relocate() to use lmb for allocation of the device
25548     tree.
25549
25550     Provided a weak function that board code can call to do additional
25551     lmb reserves if needed.
25552
25553     Also introduce the concept of bootmap_base to specify the offset in
25554     physical memory that the bootmap is located at.  This is used for
25555     allocations of the cmdline, kernel bd, and device tree as they should
25556     be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
25557
25558     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25559
25560 commit f5614e7926863bf0225ec860d9b319741a9c4004
25561 Author: Kumar Gala <galak@kernel.crashing.org>
25562 Date:   Wed Feb 27 21:51:48 2008 -0600
25563
25564     [new uImage] Add autostart flag to bootm_headers structure
25565
25566     The autostart env variable was dropped as part of the initial new uImage
25567     cleanup.  Add it back here so the arch specific code can decide if it
25568     wants to really boot or not.
25569
25570     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25571     Acked-by: Marian Balakowicz <m8@semihalf.com>
25572
25573 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
25574 Author: Kumar Gala <galak@kernel.crashing.org>
25575 Date:   Wed Feb 27 21:51:47 2008 -0600
25576
25577     [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
25578
25579     Introduce the LMB lib used on PPC in the kernel as a clean way to manage
25580     the memory spaces used by various boot images and structures.  This code
25581     will allow us to simplify the code in bootm and its support functions.
25582
25583     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25584
25585 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
25586 Author: Kumar Gala <galak@kernel.crashing.org>
25587 Date:   Tue Feb 19 22:03:47 2008 -0600
25588
25589     [new uImage] ppc: Allow boards to specify effective amount of memory
25590
25591     For historical reasons we limited the stack to 256M because some boards
25592     could only map that much via BATS.  However newer boards are capable of
25593     mapping more memory (for example 85xx is capable of doing up to 2G).
25594
25595     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25596     Acked-by: Marian Balakowicz <m8@semihalf.com>
25597
25598 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
25599 Author: Kumar Gala <galak@kernel.crashing.org>
25600 Date:   Wed Feb 27 21:51:46 2008 -0600
25601
25602     [new uImage] rework error handling so common functions don't reset
25603
25604     Changed image_get_ramdisk() to just return NULL on error and have
25605     get_ramdisk() propogate that error to the caller.  It's left to the
25606     caller to call do_reset() if it wants to.
25607
25608     Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
25609     to a common location.  In the future we will change get_fdt() and
25610     fdt_relocate() to return success/failure and not call do_reset() at all.
25611
25612     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25613     Acked-by: Marian Balakowicz <m8@semihalf.com>
25614
25615 commit d2bc095a639672def11d5d043b5688d0dbd692ec
25616 Author: Kumar Gala <galak@kernel.crashing.org>
25617 Date:   Wed Feb 27 21:51:45 2008 -0600
25618
25619     [new uImage] ppc: Re-order ramdisk/fdt handling sequence
25620
25621     Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
25622     however it does mean we have to go in and fixup the initrd info since
25623     we don't know where it will be.
25624
25625     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25626
25627 commit 27953493ef025fb698d68c5dee39b36f01f4d530
25628 Author: Kumar Gala <galak@kernel.crashing.org>
25629 Date:   Wed Feb 27 21:51:44 2008 -0600
25630
25631     [new uImage] ppc: Determine if we are booting an OF style
25632
25633     If we are bootin OF style than we can skip setting up some things
25634     that are used for the old boot method.
25635
25636     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25637     Acked-by: Marian Balakowicz <m8@semihalf.com>
25638
25639 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
25640 Author: Kumar Gala <galak@kernel.crashing.org>
25641 Date:   Wed Feb 27 21:51:43 2008 -0600
25642
25643     [new uImage] Don't pass kdb to ramdisk_high since we may not have one
25644
25645     We don't actually need the kdb param as we are just using it to get
25646     bd->bi_memsize which we can get from gd->bd->bi_memsize.  Also, if we
25647     boot via OF we might not actually fill out a kdb.
25648
25649     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25650     Acked-by: Marian Balakowicz <m8@semihalf.com>
25651
25652 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
25653 Author: Kumar Gala <galak@kernel.crashing.org>
25654 Date:   Wed Feb 27 16:30:47 2008 -0600
25655
25656     85xx: Don't icbi when unlocking the cache
25657
25658     There is no reason to icbi when invalidating the temporary stack in
25659     the d-cache.  Its impossible on e500 to have the i-cache contain
25660     any addresses in the temp stack and it can be problematic in generating
25661     transactions on the bus to non-valid addresses.
25662
25663     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25664
25665 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
25666 Author: Andy Fleming <afleming@freescale.com>
25667 Date:   Wed Feb 27 15:50:50 2008 -0600
25668
25669     Fix source for ECM error IVPR
25670
25671     The source vector for the ECM was being set to 2,
25672     but that's what the source vector for DDR was being
25673     set to.  Change it to 1.
25674
25675     Signed-off-by: Andy Fleming <afleming@freescale.com>
25676
25677 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
25678 Author: Andy Fleming <afleming@freescale.com>
25679 Date:   Wed Feb 27 14:29:58 2008 -0600
25680
25681     Invalidate INIT_RAM TLB mappings
25682
25683     Commit 0db37dc...  (and some others) changed the INIT_RAM TLB
25684     mappings to be unguarded.  This collided with an existing "bug"
25685     where the mappings for the INIT_RAM were being kept around.
25686     This meant that speculative loads to those addresses were
25687     succeeding in the TLB, and going out to the bus, where they
25688     were causing an exception (there's nothing at that address). The
25689     Flash code was coincidentally causing such a speculative load.
25690     Rather than go back to mapping the INIT RAM as guarded, we fix
25691     it so that the entries for the INIT_RAM are invalidated.  Thus
25692     the speculative loads will fail in the TLB, and have no effect.
25693
25694     Signed-off-by: Andy Fleming <afleming@freescale.com>
25695
25696 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
25697 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25698 Date:   Sun Feb 17 22:56:17 2008 +0100
25699
25700     sbc8548: Fix Revision reading and unused variable 'path'
25701
25702     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25703
25704 commit 495d162374c472f46454453553382ad0735dc725
25705 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25706 Date:   Sun Feb 17 22:56:16 2008 +0100
25707
25708     sbc8548: Fix cfi flash bank declaration
25709
25710     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25711
25712 commit 4efbe9dbb129f857f27856936112c8c02f016be6
25713 Author: Marian Balakowicz <m8@semihalf.com>
25714 Date:   Wed Feb 27 11:02:26 2008 +0100
25715
25716     [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
25717
25718     Dual format image code must properly handle all three FDT passing methods:
25719     - raw FDT blob passed
25720     - FDT blob embedded in the legacy uImage
25721     - FDT blob embedded in the new uImage
25722
25723     This patch enables proper raw FDT handling when no FIT imaeg support
25724     is compiled in. This is a bit tricky as we must dected FIT format even
25725     when FIT uImage handling is not enabled as both FIT uImages and raw FDT
25726     blobs use tha same low level format (libfdt).
25727
25728     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25729
25730 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
25731 Author: Marian Balakowicz <m8@semihalf.com>
25732 Date:   Wed Feb 27 11:02:26 2008 +0100
25733
25734     [new uImage] POWERPC: Add image_get_fdt() routine
25735
25736     FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
25737     (3) or embedded in the new uImage. For the (2) case embedding image must be
25738     verified before we get FDT from it. This patch factors out legacy image
25739     specific verification routine to the separate helper routine.
25740
25741     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25742     Acked-by: Kumar Gala <galak@kernel.crashing.org>
25743
25744 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
25745 Author: Marian Balakowicz <m8@semihalf.com>
25746 Date:   Wed Feb 27 11:02:07 2008 +0100
25747
25748     [new uImage] Add image_get_kernel() routine
25749
25750     Legacy image specific verification is factored out to a separate helper
25751     routine to keep get_kernel() generic and simple.
25752
25753     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25754     Acked-by: Kumar Gala <galak@kernel.crashing.org>
25755
25756 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
25757 Author: Marian Balakowicz <m8@semihalf.com>
25758 Date:   Wed Feb 27 11:01:04 2008 +0100
25759
25760     [new uImage] Move image verify flag to bootm_headers structure
25761
25762     Do not pass image verification flag directly to related routines.
25763     Simplify argument passing and move it to the bootm_header structure which
25764     contains curently processed image specific data and is already being passed
25765     on the argument list.
25766
25767     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25768     Acked-by: Kumar Gala <galak@kernel.crashing.org>
25769
25770 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
25771 Author: Marian Balakowicz <m8@semihalf.com>
25772 Date:   Wed Feb 27 11:00:47 2008 +0100
25773
25774     [Makefile] Sort COBJS in lib_<arch> Makefiles
25775
25776     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25777
25778 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
25779 Author: Marian Balakowicz <m8@semihalf.com>
25780 Date:   Wed Feb 27 11:00:47 2008 +0100
25781
25782     [new uImage] Optimize gen_get_image() flow control
25783
25784     When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
25785     to do, update its control flow to better reflect that simple case.
25786
25787     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25788     Acked-by: Kumar Gala <galak@kernel.crashing.org>
25789
25790 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
25791 Author: Marian Balakowicz <m8@semihalf.com>
25792 Date:   Mon Feb 4 08:28:17 2008 +0100
25793
25794     [new uImage] POWERPC: Split get_fdt() into get and relocate routines
25795
25796     PPC specific FDT blob handling code is divided into two separate routines:
25797
25798     get_fdt()   - find and verify a FDT blob (either raw or image embedded)
25799     fdt_relocate()      - move FDT blob to within BOOTMAP if needed
25800
25801     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25802     Acked-by: Kumar Gala <galak@kernel.crashing.org>
25803
25804 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
25805 Author: Jon Loeliger <jdl@freescale.com>
25806 Date:   Mon Feb 25 13:13:37 2008 -0600
25807
25808     86xx: Fix renamed GUR symbols in sbc8641d board.
25809
25810     Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
25811     (86xx: Fix GUR PCI config registers properly), we should have
25812     changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
25813     symbols in the sbc8641d board as well.  Fix this oversight.
25814
25815     Signed-off-by: Jon Loeliger <jdl@freescale.com>
25816
25817 commit 64cd594e623c39f73964d18787763e4533f791f7
25818 Author: Stefan Roese <sr@denx.de>
25819 Date:   Mon Feb 25 16:50:48 2008 +0100
25820
25821     ppc4xx: Fix acadia_nand build problem
25822
25823     Don't include testdram() on NAND-booting target acadia_nand. This saves
25824     a few bytes and makes the target build clean again.
25825
25826     Signed-off-by: Stefan Roese <sr@denx.de>
25827
25828 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
25829 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25830 Date:   Sun Feb 24 23:03:12 2008 +0000
25831
25832     mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
25833
25834     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25835
25836 commit 724902c8464e610642b3a170278b99710325888e
25837 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25838 Date:   Sun Feb 24 23:03:11 2008 +0000
25839
25840     arm-imx: Fix registers definition
25841
25842     Sync registers definition with linux
25843
25844     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25845
25846 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
25847 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25848 Date:   Sun Feb 24 23:03:10 2008 +0000
25849
25850     actua1/actua2/actua3: Fix multipleunused variable
25851
25852     - actua1:
25853         actux1.c: In function 'checkboard':
25854         actux1.c:92: warning: unused variable 'revision'
25855
25856     - actua2:
25857         actux2.c: In function 'checkboard':
25858         actux2.c:100: warning: unused variable 's'
25859         actux2.c:99: warning: unused variable 'revision'
25860         actux2.c: In function 'reset_phy':
25861         actux2.c:130: warning: unused variable 'i'
25862
25863     - actua3:
25864         actux3.c: In function 'checkboard':
25865         actux3.c:114: warning: unused variable 'revision'
25866
25867     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25868
25869 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
25870 Author: Marian Balakowicz <m8@semihalf.com>
25871 Date:   Mon Feb 4 08:28:09 2008 +0100
25872
25873     [new uImage] Add dual format uImage support framework
25874
25875     This patch adds framework for dual format images. Format detection is added
25876     and the bootm controll flow is updated to include cases for new FIT format
25877     uImages.
25878
25879     When the legacy (image_header based) format is detected appropriate
25880     legacy specific handling is invoked. For the new (FIT based) format uImages
25881     dual boot framework has a minial support, that will only print out a
25882     corresponding debug messages. Implementation of the FIT specific handling will
25883     be added in following patches.
25884
25885     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25886
25887 commit b29661fc1151077776454288051bc9a488351ce8
25888 Author: Wolfgang Denk <wd@denx.de>
25889 Date:   Sun Feb 24 15:21:36 2008 +0100
25890
25891     Coding style cleanup. Prepare v1.3.2-rc2 release candidate
25892
25893     Signed-off-by: Wolfgang Denk <wd@denx.de>
25894
25895 commit 00b48a48424894daa589d166d73277830b1c6ac4
25896 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25897 Date:   Sat Feb 23 12:15:56 2008 +0100
25898
25899     ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
25900
25901     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25902
25903 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
25904 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25905 Date:   Sat Feb 23 17:24:16 2008 +0900
25906
25907     Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
25908
25909     ----------------------------------------------------------------
25910     Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
25911
25912     Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
25913     32bit targets.
25914
25915     GCC can be made to warn about usage of long long types with ISO C90
25916     (-ansi), but only with -pedantic.  You can write this in a way that even
25917     then it doesn't cause warnings, namely by:
25918
25919     #ifdef __GNUC__
25920     __extension__ typedef __signed__ long long __s64;
25921     __extension__ typedef unsigned long long __u64;
25922     #endif
25923
25924     The __extension__ keyword in front of this switches off any pedantic
25925     warnings for this expression.
25926
25927     Signed-off-by: Olaf Hering <olh@suse.de>
25928     Cc: <linux-arch@vger.kernel.org>
25929     Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
25930     Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
25931     ----------------------------------------------------------------
25932
25933     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25934
25935 commit 208acd112e6517b21fc30c420396902b103563ac
25936 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25937 Date:   Sat Feb 23 17:07:57 2008 +0900
25938
25939     cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
25940
25941     This will reduce the build time.
25942
25943     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25944
25945 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
25946 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25947 Date:   Sat Feb 23 17:05:00 2008 +0900
25948
25949     cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
25950
25951     This will reduce the build time.
25952
25953     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25954
25955 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
25956 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25957 Date:   Sat Feb 23 16:58:41 2008 +0900
25958
25959     cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
25960
25961     This reduces the build time by ~10%. Here's the gth2_config example.
25962
25963             BEFORE       AFTER
25964     real    0m31.441s    0m27.833s
25965     user    0m24.766s    0m23.045s
25966     sys     0m10.425s    0m7.468s
25967
25968     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25969
25970 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
25971 Author: Marcel Moolenaar <marcelm@juniper.net>
25972 Date:   Fri Feb 22 10:48:07 2008 -0800
25973
25974     make define2mk.sed work on FreeBSD
25975
25976     In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
25977     the define2mk.sed script was identified as the source of the link
25978     failure on FreeBSD. The problem is that sed(1) does not always support
25979     the '+' operator. It isn't on FreeBSD. The attach patch implements the
25980     equivalent, using the '*' operator instead and should work everywhere.
25981
25982     Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
25983
25984 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
25985 Author: Detlev Zundel <dzu@denx.de>
25986 Date:   Fri Feb 22 17:21:32 2008 +0100
25987
25988     Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
25989
25990     The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
25991     final traces of long-deprecated "ramdisk" kernel parm") makes these
25992     changes neccessary.
25993
25994     Signed-off-by: Detlev Zundel <dzu@denx.de>
25995
25996 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
25997 Author: Larry Johnson <lrj@acm.org>
25998 Date:   Thu Feb 21 13:58:16 2008 -0500
25999
26000     LM75 bug fix for negative temperatures
26001
26002     When the LM75 temperature sensor measures a temperature below 0 C, the
26003     current driver does not perform sign extension, so the result returned is
26004     256 C too high.  This patch fixes the problem.
26005
26006     Signed-off-by: Larry Johnson <lrj@acm.org>
26007
26008 commit 5a910c224b13e413bda41922379add6d75c32da3
26009 Author: Heiko Schocher <hs@denx.de>
26010 Date:   Thu Feb 21 18:33:45 2008 +0100
26011
26012     IDS8247: update MAINTAINER entry.
26013
26014     Signed-off-by: Heiko Schocher <hs@denx.de>
26015
26016 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
26017 Author: Heiko Schocher <hs@denx.de>
26018 Date:   Thu Feb 21 18:31:15 2008 +0100
26019
26020     Fix device tree for mgsuvd board.
26021
26022     Rename the "scc" node in "ethernet" for the mgsuvd board.
26023
26024     Signed-off-by: Heiko Schocher <hs@denx.de>
26025
26026 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
26027 Author: Yuri Tikhonov <yur@emcraft.com>
26028 Date:   Thu Feb 21 14:23:42 2008 +0100
26029
26030     lwmon5: enable hardware watchdog
26031
26032     Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
26033     causing it to reboot the board if U-Boot does a long busy-wait with
26034     udelay(). Thus, for these boards we have to restart WD more
26035     frequently.
26036
26037     This patch splits the busy-wait udelay() into smaller, predefined,
26038     intervals, so that the watchdog timer may be resetted with the
26039     configurable (CONFIG_WD_PERIOD) interval.
26040
26041     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
26042
26043 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
26044 Author: Anatolij Gustschin <agust@denx.de>
26045 Date:   Thu Feb 21 12:52:29 2008 +0100
26046
26047     ppc4xx: Support for ATI Radeon 9200 card on sequoia
26048
26049     Adds configuration option for ATI Radeon 9200 card
26050     support to sequoia config file. If CONFIG_VIDEO
26051     is enabled, TEXT_BASE should be changed to 0xFFF80000.
26052
26053     Signed-off-by: Anatolij Gustschin <agust@denx.de>
26054
26055 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
26056 Author: Kumar Gala <galak@kernel.crashing.org>
26057 Date:   Mon Feb 18 08:18:07 2008 -0600
26058
26059     Remove duplicate defines for ARRAY_SIZE
26060
26061     A few duplicate of the ARRAY_SIZE macro sneaked in since we put
26062     the define in common.h.
26063
26064     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26065
26066 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
26067 Author: Kumar Gala <galak@kernel.crashing.org>
26068 Date:   Mon Feb 18 08:09:37 2008 -0600
26069
26070     ppc: Allow boards to specify effective amount of memory
26071
26072     For historical reasons we limited the stack to 256M because some boards
26073     could only map that much via BATS.  However newer boards are capable of
26074     mapping more memory (for example 85xx is capable of doing up to 2G).
26075
26076     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26077
26078 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
26079 Author: Mike Frysinger <vapier@gentoo.org>
26080 Date:   Mon Feb 18 05:24:13 2008 -0500
26081
26082     include autoconf.mk before any other .mk files
26083
26084     This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
26085     those .mk files can have make if statements based on the current config.
26086
26087     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26088
26089 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
26090 Author: Mike Frysinger <vapier@gentoo.org>
26091 Date:   Mon Feb 18 05:10:07 2008 -0500
26092
26093     error check autoconf.mk generation
26094
26095     If any of the steps for generating autoconf.mk fail currently, they go
26096     unnoticed.  To fix, we can simply add 'set -e' to the long list of commands.
26097     This is simpler and more robust than placing '|| exit $$?' after every line.
26098
26099     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26100
26101 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
26102 Author: Stefano Babic <sbabic@denx.de>
26103 Date:   Mon Feb 18 08:03:51 2008 +0100
26104
26105     Fix bug in dependency checking
26106
26107     By adding VERSION_FILE to the PHONY targets the script
26108     /tools/setlocalversion is always called and version_autogenerated.h
26109     is replaced only if the script find a modified source file.
26110
26111     Signed-off-by: Stefano Babic <sbabic@denx.de>
26112
26113 commit 98ba144ccc912eee90dd42699f023c497ce774c6
26114 Author: Kyungmin Park <kmpark@infradead.org>
26115 Date:   Mon Feb 18 14:35:43 2008 +0900
26116
26117     Fix GPMC CS2 memory setup at apollon
26118
26119     It disables the current map first
26120
26121     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
26122
26123 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
26124 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26125 Date:   Sun Feb 17 23:52:46 2008 +0100
26126
26127     uli526x: Fix multiple differ in signedness and parentheses around comparison
26128
26129     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26130
26131 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
26132 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26133 Date:   Sun Feb 17 16:58:04 2008 +0100
26134
26135     MIPS: Fix CFG_NO_FLASH support
26136
26137     - Fix flash_init call when CFG_NO_FLASH is used
26138     - Remove no more needed flash.c for qemu-mips
26139
26140     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26141
26142 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
26143 Author: Mike Frysinger <vapier@gentoo.org>
26144 Date:   Sat Feb 16 02:40:18 2008 -0500
26145
26146     easylogo: clean up some more and add -r (rgb) support
26147
26148     Michael Hennerich added support for outputting an image in RGB format rather
26149     than forcing YUYV all the time.  This makes obvious sense if the display you
26150     have takes RGB input rather than YUYV.
26151
26152     Rather than hack in support for options, I've converted it to use getopt and
26153     cleaned up the argument parsing in the process.
26154
26155     Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
26156     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26157
26158 commit f65c98129ccada3f7caf97d80395a95b84e911de
26159 Author: Mike Frysinger <vapier@gentoo.org>
26160 Date:   Sat Feb 16 02:12:37 2008 -0500
26161
26162     Makefile: add target for $(LDSCRIPT)
26163
26164     If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
26165     then change into the board directory and try and create it.  This allows you
26166     to generate the linker script on the fly based upon board defines (like the
26167     Blackfin boards do).
26168
26169     There should be no regressions due to this change as the normal case is to
26170     already have a u-boot.lds file.  If that's the case, then there's nothing to
26171     generate, and so make will always exit.  The fix here is that if the linker
26172     script does not exist, the implicit rules take over and attempt to guess how
26173     to generate the file.
26174
26175     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26176
26177 commit 5583cbf736474ef754e128a54fb78632f57b48fd
26178 Author: Marian Balakowicz <m8@semihalf.com>
26179 Date:   Thu Feb 21 17:27:49 2008 +0100
26180
26181     [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
26182
26183     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
26184
26185 commit 2242f5369822bc7780db95c47985bb408ea9157b
26186 Author: Marian Balakowicz <m8@semihalf.com>
26187 Date:   Thu Feb 21 17:27:41 2008 +0100
26188
26189     [new uImage] Rename and move print_image_hdr() routine
26190
26191     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
26192
26193 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
26194 Author: Marian Balakowicz <m8@semihalf.com>
26195 Date:   Thu Feb 21 17:20:20 2008 +0100
26196
26197     [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
26198
26199     Introducing routines for parsing new uImage format bootm arguments:
26200     [<addr>]#<conf>             - configuration specification
26201     [<addr>]:<subimg>   - subimage specification
26202
26203     New format images can contain multiple subimages of the same type. For example
26204     a single new format image file can contain three kernels, two ramdisks and a
26205     couple of FDT blobs. Subimage and configuration specifications are extensions
26206     to bootm (and other image-related commands) arguments' syntax that allow to
26207     specify which particular subimage should be operated on.
26208
26209     Subimage specification is used to denote a particular subimage. Configurations
26210     are a bit more complex -- they are used to define a particualr booting setup,
26211     for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
26212     etc.
26213
26214     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
26215
26216 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
26217 Author: Marian Balakowicz <m8@semihalf.com>
26218 Date:   Thu Feb 21 17:20:19 2008 +0100
26219
26220     [new uImage] Add gen_get_image() routine
26221
26222     This routine assures that image (whether legacy or FIT) is not
26223     in a special dataflash storage.
26224
26225     If image address is a dataflash address image is moved to system RAM.
26226
26227     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
26228
26229 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
26230 Author: Marian Balakowicz <m8@semihalf.com>
26231 Date:   Thu Feb 21 17:20:18 2008 +0100
26232
26233     [new uImage] Pull in libfdt if CONFIG_FIT is enabled
26234
26235     New uImage format (Flattened Image Tree) requires libfdt
26236     functionality, print out error message if CONFIG_OF_LIBFDT
26237     is not defined.
26238
26239     New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
26240     This commit turns it on by default.
26241
26242     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
26243
26244 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
26245 Author: Michael Schwingen <michael@schwingen.org>
26246 Date:   Mon Feb 18 23:16:35 2008 +0100
26247
26248     CFI: Do not use uninitialized cmd_reset
26249
26250     Do not use uninitialized cmd_reset; issue both AMD and Intel reset
26251     commands instead
26252
26253     From a short test, it looks like AMD-style flash roms treat *any* unknown
26254     command write as a reset, at least when in CFI Query mode, so issuing the
26255     Intel reset command to AMD-style flashs seems safe (from the small sample I
26256     have), plus the 3-cycle magic sequence should kick the state machine into
26257     the right state even without a reset command. Since the AMD-style flashs
26258     require the unlock sequence for real operation, I chose to try the AMD reset
26259     command first, so that Intel flashs do no see an invalid command prior to
26260     the CFI query.
26261
26262     I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
26263     plus Intel StrataFlash.
26264
26265     Signed-off-by: Michael Schwingen <michael@schwingen.org>
26266     Signed-off-by: Stefan Roese <sr@denx.de>
26267
26268 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
26269 Author: Rafal Jaworowski <raj@semihalf.com>
26270 Date:   Thu Feb 21 11:56:44 2008 +0100
26271
26272     API: Add (c) and licensing notice to the public API header.
26273
26274     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
26275
26276 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
26277 Author: Yuri Tikhonov <yur@emcraft.com>
26278 Date:   Thu Feb 21 11:06:07 2008 +0100
26279
26280     Fix CPU POST test failure
26281
26282     The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
26283     ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
26284     by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
26285     This patch just saves the CR value before running the test code, so allowing
26286     it to do anything it wants with CR.
26287
26288     Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
26289     Acked-by: Yuri Tikhonov <yur@emcraft.com>
26290     --
26291
26292 commit d5908b093955415f3d340706378b991f911af671
26293 Author: Jon Loeliger <jdl@freescale.com>
26294 Date:   Wed Feb 20 15:26:51 2008 -0600
26295
26296     8610HPCD: Document the flashbank selection switches.
26297
26298     Signed-off-by: Jon Loeliger <jdl@freescale.com>
26299
26300 commit a551cee99ad1d1da20fd23ad265de47448852f56
26301 Author: Jon Loeliger <jdl@freescale.com>
26302 Date:   Wed Feb 20 14:22:26 2008 -0600
26303
26304     86xx: Fix GUR PCI config registers properly.
26305
26306     Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
26307     I tried to "8610HPCD: Fix typos in two PCI setup registers", I
26308     botched it due to not realizing that 8610 and 8641 had different
26309     Global Utility Register defintions, one of which was like 85xx,
26310     and the other wasn't.  Correct this problem by introducing two
26311     symbols, one for each 86xx SoC, but neither of which is named
26312     anything like 85xx.
26313
26314     My bad.  Lovely Wednesday with git bisect.  You know.
26315
26316     Signed-off-by: Jon Loeliger <jdl@freescale.com>
26317
26318 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
26319 Author: Jon Loeliger <jdl@freescale.com>
26320 Date:   Wed Feb 20 12:24:11 2008 -0600
26321
26322     8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
26323
26324     Without an actual supported video card hooked up, enabling
26325     the CONFIG_VIDEO by default just makes it look broken by
26326     routing all console output to the video card.   Don't.
26327
26328     Signed-off-by: Jon Loeliger <jdl@freescale.com>
26329
26330 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
26331 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
26332 Date:   Wed Jan 30 15:08:15 2008 -0600
26333
26334     ColdFire: Fix missing code flash size for M5485EVB
26335
26336     Signed-off-by: James Mahan <kmahan@freescale.com>
26337     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
26338
26339 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
26340 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
26341 Date:   Wed Jan 30 15:04:42 2008 -0600
26342
26343     ColdFire: Fix 5282 and 5271 interrupt mask bit
26344
26345     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
26346
26347 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
26348 Author: Jon Loeliger <jdl@freescale.com>
26349 Date:   Tue Feb 19 12:31:08 2008 -0600
26350
26351     8610HPCD: Fix typos in two PCI setup registers.
26352
26353     The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
26354     were erroneously present as 85xx names and values, leftover from
26355     the clone wars.  Fix this by removing the 85xx cruft from the
26356     86xx codebase.
26357
26358     Signed-off-by: Jon Loeliger <jdl@freescale.com>
26359
26360 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
26361 Author: Jon Loeliger <jdl@freescale.com>
26362 Date:   Mon Feb 18 14:01:56 2008 -0600
26363
26364     86xx: Convert sbc8641d to use libfdt.
26365
26366     This is the proper fix for a missing closing brace in the function
26367     ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
26368     The ft_cpu_setup() function in mpc8641hpcn.c should have been
26369     removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
26370     but was missed.  Only, the sbc8641d was nominally still using it.
26371     It all got ripped out, and the funcality that was in ft_board_setup()
26372     was refactored to remove the CPU portions into the new file
26373     cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.
26374
26375     Based loosely on an original patch from joe.hamman@embeddedspecialties.com
26376
26377     Signed-off-by: Jon Loeliger <jdl@freescale.com>
26378
26379 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
26380 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26381 Date:   Sun Feb 17 23:35:31 2008 +0100
26382
26383     mpc86xx: Fix unused variable 'config' and 'immap'
26384
26385     and remove useless CONFIG_DDR_INTERLEAVE
26386
26387     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26388
26389 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
26390 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26391 Date:   Sun Feb 17 23:03:36 2008 +0100
26392
26393     mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
26394
26395     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26396
26397 commit b6f29c84c208a091f95a10cbc9852d729659ba20
26398 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26399 Date:   Sun Feb 17 14:15:31 2008 +0100
26400
26401     s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
26402
26403     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26404
26405 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
26406 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26407 Date:   Sun Feb 17 14:15:32 2008 +0100
26408
26409     pxa: fix assignment from incompatible pointer type
26410
26411     fix mmc_bread function prototype
26412
26413     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26414
26415 commit 64d792063fff90b8118179b092feee09fe5cae13
26416 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26417 Date:   Sun Feb 17 14:15:30 2008 +0100
26418
26419     at91cap9adk: fix implicit declaration of function 'eth_init'
26420
26421     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26422
26423 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
26424 Author: Wolfgang Denk <wd@denx.de>
26425 Date:   Sun Feb 17 15:43:44 2008 +0100
26426
26427     Remove files added by mistake, update CHANGELOG.
26428
26429     Signed-off-by: Wolfgang Denk <wd@denx.de>
26430
26431 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
26432 Author: Mike Nuss <mike@terascala.com>
26433 Date:   Wed Feb 6 11:10:11 2008 -0500
26434
26435     PPC440EPx: Optionally enable second I2C bus
26436
26437     The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
26438     PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
26439     code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
26440
26441     Signed-off-by: Mike Nuss <mike@terascala.com>
26442     Cc: Stefan Roese <sr@denx.de>
26443
26444 commit ef5b4f221c22d05770878513951745f236b5b43f
26445 Author: Niklaus Giger <niklaus.giger@netstal.com>
26446 Date:   Tue Feb 5 10:26:44 2008 +0100
26447
26448     ppc4xx: HCU4/5. Cleanup configs
26449
26450     - hcu4.h: Removed define of CONFIG_PPC405GPr
26451     - Corrected phy addresses
26452     - Fix boot variables
26453     - Respect line length of 80 chars
26454
26455     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
26456
26457 commit 74973126d1be63ac75bdc192f46234dca3a7c421
26458 Author: Niklaus Giger <niklaus.giger@netstal.com>
26459 Date:   Tue Feb 5 11:31:28 2008 +0100
26460
26461     ppc4xx: HCU4/5. Cleanups
26462
26463     - Fix some coding style violations.
26464     - Use in/out_u16/32 where appropriate.
26465     - Use register names from ppc405.h.
26466     - Fix trace useage for Lauterbach.
26467     - Remove obsolete generation HCU2.
26468     - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
26469
26470     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
26471
26472 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
26473 Author: Niklaus Giger <niklaus.giger@netstal.com>
26474 Date:   Tue Feb 5 10:26:41 2008 +0100
26475
26476     ppc4xx: PPC405GPr fix missing register definitions
26477
26478     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
26479
26480 commit 214398d9cb22268d9d4f7563359edca0f78297a2
26481 Author: Larry Johnson <lrj@acm.org>
26482 Date:   Fri Jan 18 21:49:05 2008 -0500
26483
26484     ppc4xx: Beautify configuration files for Sequoia and Korat boards
26485
26486     Signed-off-by: Larry Johnson <lrj@acm.org>
26487
26488 commit 30c6a241e88499f536e86d325759e29ba00ff67f
26489 Author: Anatolij Gustschin <agust@denx.de>
26490 Date:   Fri Feb 15 20:09:01 2008 +0100
26491
26492     Wipe out assembler warnings while compiling x86 biosemu
26493
26494     This patch tries to get rid of some assembler warnings about
26495     changed .got2 section type while compiling x86 bios emulator
26496     code.
26497
26498     Signed-off-by: Anatolij Gustschin <agust@denx.de>
26499
26500 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
26501 Author: Wolfgang Denk <wd@denx.de>
26502 Date:   Fri Feb 15 00:57:09 2008 +0100
26503
26504     Prepare v1.3.2-rc1 release candidate
26505
26506 commit f33e9653c9c09868995d788511d573771c209fe5
26507 Author: Anatolij Gustschin <agust@denx.de>
26508 Date:   Fri Feb 15 00:13:20 2008 +0100
26509
26510     Fix compile warning on lib_ppc/board.c
26511
26512     Signed-off-by: Anatolij Gustschin <agust@denx.de>
26513
26514 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
26515 Author: Anatolij Gustschin <agust@denx.de>
26516 Date:   Thu Feb 14 18:22:04 2008 +0100
26517
26518     Add Radeon Mobility 9200 pci device id to the radeon driver
26519
26520     This patch extends PCI device id table of the
26521     radeon driver so that the driver will also support
26522     Radeon Mobility 9200 (M9+) based boards.
26523
26524     Signed-off-by: Anatolij Gustschin <agust@denx.de>
26525
26526 commit 1b8607e1f7143548c6062c28371449ec69588c00
26527 Author: Anatolij Gustschin <agust@denx.de>
26528 Date:   Thu Feb 14 18:19:50 2008 +0100
26529
26530     Extend ATI Radeon driver to support more video modes
26531
26532     Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
26533     800x600, 640x480 at 24, 16 and 8 bpp.
26534
26535     Signed-off-by: Anatolij Gustschin <agust@denx.de>
26536
26537 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
26538 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26539 Date:   Sun Feb 10 17:05:20 2008 +0100
26540
26541     xsengine: fix typo and few coding style
26542
26543     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26544
26545 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
26546 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26547 Date:   Fri Feb 8 21:25:58 2008 +0100
26548
26549     Fix wrong memory limit calculation in memory-test
26550
26551     If the length of the memory address range passed to the "mtest" command is
26552     not of the form 2^x - 1, not all address lines are tested. This bug is
26553     inherited from the original software at
26554     http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
26555     this.
26556
26557     Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26558
26559 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
26560 Author: Wolfgang Denk <wd@denx.de>
26561 Date:   Fri Feb 15 00:11:39 2008 +0100
26562
26563     Coding STyle cleanup.
26564
26565     Signed-off-by: Wolfgang Denk <wd@denx.de>
26566
26567 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
26568 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26569 Date:   Tue Feb 5 13:30:43 2008 +0900
26570
26571     sh: Fix register address of SH7722
26572
26573     The address of SH7722 is wrong by old document.
26574     This patch fixes this problem.
26575
26576     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26577
26578 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
26579 Author: Mike Frysinger <vapier@gentoo.org>
26580 Date:   Mon Feb 4 17:44:23 2008 -0500
26581
26582     only update version header as needed
26583
26584     Constantly rebuilding the version header will force useless relinking, so we
26585     simply need to compare the new header with the existing one before updating
26586     it.
26587
26588     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26589
26590 commit 208447f8e953f347425eb92c8e28d59e6d911363
26591 Author: Mike Frysinger <vapier@gentoo.org>
26592 Date:   Mon Jan 28 05:56:19 2008 -0500
26593
26594     Do not specify a CROSS_COMPILE default when executing size
26595
26596     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26597
26598 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
26599 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26600 Date:   Wed Feb 13 11:19:19 2008 +0100
26601
26602     Fix return value of mtest when CFG_ALT_MEMTEST set
26603
26604     Fix a missing return statement from a non-void function.
26605
26606     Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
26607
26608 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
26609 Author: Timur Tabi <timur@freescale.com>
26610 Date:   Wed Jan 9 14:35:26 2008 -0600
26611
26612     85xx, 86xx: Determine I2C clock frequencies and store in global_data
26613
26614     Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
26615
26616     Update the get_clocks() function in 85xx and 86xx to determine the I2C
26617     clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
26618
26619     Signed-off-by: Timur Tabi <timur@freescale.com>
26620
26621 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
26622 Author: Wolfgang Denk <wd@denx.de>
26623 Date:   Thu Feb 14 23:18:01 2008 +0100
26624
26625     TQM834x: clean up configuration
26626
26627     Get board name consistent with Linux and elsewhere;
26628     get rid of local network definitions etc.
26629
26630     Signed-off-by: Wolfgang Denk <wd@denx.de>
26631
26632 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
26633 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26634 Date:   Thu Feb 14 08:02:12 2008 +0100
26635
26636     TFTP: fix search of ':' in BootFile
26637
26638     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26639
26640 commit 0bc9efada170096c6b273f19165e32936d330d80
26641 Author: Wolfgang Denk <wd@denx.de>
26642 Date:   Thu Feb 14 22:46:55 2008 +0100
26643
26644     Coding style cleanup; update CHANGELOG.
26645
26646     Signed-off-by: Wolfgang Denk <wd@denx.de>
26647
26648 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
26649 Author: Wolfgang Denk <wd@denx.de>
26650 Date:   Thu Feb 14 22:43:22 2008 +0100
26651
26652     PPC: Use r2 instead of r29 as global data pointer
26653
26654     R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
26655     will refuse to use load/store multiple insns; instead, it issues a
26656     list of simple load/store instructions upon function entry and exit,
26657     resulting in bigger code size, which in turn makes the build for a
26658     few boards fail.
26659
26660     Use r2 instead.
26661
26662     Signed-off-by: Wolfgang Denk <wd@denx.de>
26663
26664 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
26665 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
26666 Date:   Wed Jan 30 09:08:49 2008 +0100
26667
26668     ARM: make the machid configurable via the environment
26669
26670     If the variable "machid" exists, let do_bootm_linux use that instead
26671     of bd->bi_arch_number.
26672
26673     Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
26674
26675 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
26676 Author: Vlad Lungu <vlad@comsys.ro>
26677 Date:   Wed Jan 23 16:34:46 2008 +0200
26678
26679     Use #ifdef CONFIG_FSLDMAFEC
26680
26681     MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
26682     fails
26683
26684     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
26685
26686 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
26687 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26688 Date:   Sat Jan 19 10:25:59 2008 +0900
26689
26690     common/miiphyutil.c: Cleanup MII_DEBUG and debug()
26691
26692     Current MII_DEBUG is confusing in two ways. One is useless define-then-
26693     undef at the top of the file. The other is there is only one debug() in
26694     this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
26695     While there are many useful printf()/puts() debug codes, but they are for
26696     DEBUG, not for MII_DEBUG.
26697
26698     This patch tries to put them all together into MII_DEBUG and debug().
26699
26700     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26701
26702 commit 751b9b5189f3274b03c809172631316d6b002c82
26703 Author: Kyungmin Park <kmpark@infradead.org>
26704 Date:   Thu Jan 17 16:43:25 2008 +0900
26705
26706     OneNAND Initial Program Loader (IPL) support
26707
26708     This patch enables the OneNAND boot within U-Boot.
26709     Before this work, we used another OneNAND IPL called X-Loader based
26710     on open source. With this work, we can build the oneboot.bin image
26711     without other program.
26712
26713     The build sequence is simple.
26714     First, it compiles the u-boot.bin
26715     Second, it compiles OneNAND IPL
26716     Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
26717     The mechanism is similar with NAND boot except it boots from itself.
26718
26719     Another thing is that you can only use the OneNAND IPL only to work
26720     other bootloader such as RedBoot and so on.
26721
26722     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
26723
26724 commit 21f6f9636f0e978397548751347425fbf8d42bb3
26725 Author: Andy Fleming <afleming@freescale.com>
26726 Date:   Wed Jan 16 13:06:59 2008 -0600
26727
26728     Fix CONFIG_MMC usage in fat code
26729
26730     A #if statement in fat.c depended on CONFIG_MMC, instead of
26731     defined(CONFIG_MMC).  This meant CONFIG_MMC needed to be defined
26732     as "1" rather than just defined.  Now it's better.
26733
26734     Signed-off-by: Andy Fleming <afleming@freescale.com>
26735
26736 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
26737 Author: Rafal Jaworowski <raj@semihalf.com>
26738 Date:   Tue Jan 15 12:52:31 2008 +0100
26739
26740     ppc: Refactor cache routines, so there is only one common set.
26741
26742     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
26743
26744 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
26745 Author: Jon Loeliger <jdl@jdl.com>
26746 Date:   Wed Jan 23 15:55:02 2008 -0600
26747
26748     86xx: Fix compilation warning in sys_eprom.c
26749
26750     sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
26751
26752     Signed-off-by: Jon Loeliger <jdl@freescale.com>
26753
26754 commit 65230107025733e89e28fd5e5cfd916d4953c28a
26755 Author: Haavard Skinnemoen <hskinnemoen at>
26756 Date:   Fri Feb 22 11:40:50 2008 +0000
26757
26758     Move AT91RM9200DK board support under board/atmel
26759
26760     We already have a vendor subdir for Atmel, so we should use it.
26761
26762     Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
26763
26764 commit 6d0943a6be99977d6d853d51749e9963d68eb192
26765 Author: Andreas Engel <andreas.engel@ericsson.com>
26766 Date:   Mon Jan 14 09:06:52 2008 +0000
26767
26768     ARM: cleanup duplicated exception handlingcode
26769
26770     Move duplicated exception handling code into lib_arm.
26771
26772     Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
26773
26774 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
26775 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
26776 Date:   Fri Feb 1 10:09:03 2008 +0000
26777
26778     Support for Artila M-501 starter kit
26779
26780     Kimmo Leppala / Sysart and
26781     Timo Tuunainen / Sysart
26782
26783 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
26784 Author: Stelian Pop <stelian@popies.net>
26785 Date:   Mon Feb 11 10:50:19 2008 +0000
26786
26787     AT91CAP9 support
26788
26789     ---------------------------------
26790
26791     read_dataflash() takes a signed char pointer as a parameter. Silence a
26792     few warnings dues to incorrect parameter types in env_dataflash.c.
26793
26794     Signed-off-by: Stelian Pop <stelian@popies.net>
26795
26796 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
26797 Author: Stelian Pop <stelian@popies.net>
26798 Date:   Thu Feb 7 09:42:57 2008 +0000
26799
26800     AT91CAP9 support : move board files to Atmel vendor directory.
26801
26802     AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
26803
26804     Signed-off-by: Stelian Pop <stelian@popies.net>
26805
26806 commit 7263ef191b87da94768f762c7093bedeb70db98f
26807 Author: Stelian Pop <stelian at>
26808 Date:   Thu Jan 3 21:15:56 2008 +0000
26809
26810     AT91CAP9 support : MACB changes
26811
26812     Signed-off-by: Stelian Pop <stelian <at> popies.net>
26813     Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
26814
26815 commit 6afcabf11d7321850f4feaadfee841488ace54c5
26816 Author: Stelian Pop <stelian@popies.net>
26817 Date:   Thu Feb 7 16:37:54 2008 +0000
26818
26819     AT91CAP9 support : board/ files
26820
26821     Signed-off-by: Stelian Pop <stelian@popies.net>
26822
26823 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
26824 Author: Stelian Pop <stelian at>
26825 Date:   Wed Jan 30 21:15:54 2008 +0000
26826
26827     AT91CAP9 support : cpu/ files
26828
26829     Signed-off-by: Stelian Pop <stelian <at> popies.net>
26830
26831 commit fa506a926cec348805143576c941f8e61b333cc0
26832 Author: Stelian Pop <stelian@popies.net>
26833 Date:   Thu Jan 31 21:15:53 2008 +0000
26834
26835     AT91CAP9 support : include/ files
26836
26837     Signed-off-by: Stelian Pop <stelian@popies.net>
26838
26839 commit 20b197c6f2799af399a68f96a1aff543a75621b8
26840 Author: Stelian Pop <stelian@popies.net>
26841 Date:   Sun Jan 20 19:49:21 2008 +0000
26842
26843     AT91CAP9 support : build integration
26844
26845     Signed-off-by: Stelian Pop <stelian@popies.net>
26846
26847 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
26848 Author: Stelian Pop <stelian@popies.net>
26849 Date:   Sun Jan 20 21:07:00 2008 +0000
26850
26851     Improve DataFlash CS definition.
26852
26853     Use a structure instead of the error prone unnamed array to
26854     define the possible dataflash banks.
26855
26856     Signed-off-by: Stelian Pop <stelian@popies.net>
26857
26858 commit a6cdd21b56014208706238712a853a9e9a0a2290
26859 Author: Stelian Pop <stelian@popies.net>
26860 Date:   Sat Jan 19 21:09:35 2008 +0000
26861
26862     Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
26863
26864     Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
26865
26866     cpu/arm926ejs/start.o: In function `cpu_init_crit':
26867     .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
26868
26869     Signed-off-by: Stelian Pop <stelian@popies.net>
26870
26871 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
26872 Author: Peter Pearse <peter.pearse@arm.com>
26873 Date:   Fri Feb 1 16:50:24 2008 +0000
26874
26875     Fix timer overflow in DaVinci
26876     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
26877
26878 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
26879 Author: Peter Pearse <peter.pearse@arm.com>
26880 Date:   Fri Feb 1 16:49:08 2008 +0000
26881
26882     Update board NetStar
26883     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
26884
26885 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
26886 Author: Niklaus Giger <niklaus.giger@netstal.com>
26887 Date:   Tue Feb 5 10:26:42 2008 +0100
26888
26889     ppc4xx: HCU4/5. Fix make O=../xx
26890
26891     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
26892
26893 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
26894 Author: Larry Johnson <lrj@acm.org>
26895 Date:   Tue Jan 22 08:51:59 2008 -0500
26896
26897     ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
26898
26899     Signed-off-by: Larry Johnson <lrj@acm.org>
26900
26901 commit fe891ecf4d187e9d11dde869ed4623af52b54451
26902 Author: Hiroshi Ito <ito@mlb.co.jp>
26903 Date:   Thu Jan 31 18:35:04 2008 +0900
26904
26905     NFS Timeout with large files.
26906
26907     Retry to send NFS packet before reaching timeout.
26908
26909     Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
26910
26911 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
26912 Author: Johannes Stezenbach <js@sig21.net>
26913 Date:   Tue Jan 29 00:11:25 2008 +0100
26914
26915     Add dependencies to avoid race conditions with parallel make.
26916
26917     Signed-off-by: Johannes Stezenbach <js@sig21.net>
26918
26919 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
26920 Author: Mike Frysinger <vapier@gentoo.org>
26921 Date:   Mon Jan 28 05:46:01 2008 -0500
26922
26923     Mark board_init_[fr] as noreturn
26924
26925     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26926
26927 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
26928 Author: Mike Frysinger <vapier@gentoo.org>
26929 Date:   Mon Jan 28 05:28:50 2008 -0500
26930
26931     Only use TEXT_BASE if defined by the board
26932
26933     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26934
26935 commit 1b769881750030f10743808b9d6013e11f559350
26936 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26937 Date:   Fri Jan 25 07:54:47 2008 +0100
26938
26939     Fix remaining CONFIG_COMMANDS
26940
26941     update comments
26942     Fix coding style
26943
26944     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
26945
26946 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
26947 Author: Niklaus Giger <niklaus.giger@netstal.com>
26948 Date:   Mon Jan 21 16:46:00 2008 +0100
26949
26950     Add *~ to .gitignore
26951
26952     One should never add a backup file ending in with ~ to the git repository.
26953
26954     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
26955
26956 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
26957 Author: Kumar Gala <galak@kernel.crashing.org>
26958 Date:   Thu Jan 17 00:02:10 2008 -0600
26959
26960     Remove duplicate defines for ARRAY_SIZE
26961
26962     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26963
26964 commit c77ce474b1c57b13e9d36d9830f147966c143694
26965 Author: Stelian Pop <stelian@popies.net>
26966 Date:   Mon Jan 14 22:08:14 2008 +0100
26967
26968     Fix incorrect address test in AT91F_DataflashSelect().
26969
26970     Signed-off-by: Stelian Pop <stelian@popies.net>
26971
26972 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
26973 Author: Kumar Gala <galak@kernel.crashing.org>
26974 Date:   Wed Feb 13 15:09:58 2008 -0600
26975
26976     Fix building of fdt_support.c if DEBUG set
26977
26978     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26979
26980 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
26981 Author: Jon Loeliger <jdl@freescale.com>
26982 Date:   Tue Feb 12 14:53:28 2008 -0600
26983
26984     Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
26985
26986     These replace direct structure references for IMMR sections.
26987
26988     Signed-off-by: Jon Loeliger <jdl@freescale.com>
26989
26990 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
26991 Author: Wolfgang Denk <wd@denx.de>
26992 Date:   Tue Feb 12 00:45:06 2008 +0100
26993
26994     Get rid of "#undef DEBUG" from board config files.
26995
26996     Signed-off-by: Wolfgang Denk <wd@denx.de>
26997
26998 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
26999 Author: Timur Tabi <timur@freescale.com>
27000 Date:   Tue Jan 15 17:09:41 2008 -0600
27001
27002     Remove #undef DEBUG from MPC83xx board header files
27003
27004     Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
27005     The inclusion of this line makes it impossible to enable debug code in
27006     other source files, because "#define DEBUG" typically needs to be defined
27007     before any header files are included.
27008
27009     Signed-off-by: Timur Tabi <timur@freescale.com>
27010
27011 commit 69018ce2e086e9caf35b914d675b82bc4888f077
27012 Author: Kumar Gala <galak@kernel.crashing.org>
27013 Date:   Thu Jan 17 08:25:45 2008 -0600
27014
27015     QE: Move FDT support into a common file
27016
27017     Move the flat device tree setup for QE related devices into
27018     a common file shared between 83xx & 85xx platforms that have QE's.
27019
27020     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27021
27022 commit 5cf746c303710329f8040d9c62ee354313e3e91f
27023 Author: Marian Balakowicz <m8@semihalf.com>
27024 Date:   Thu Jan 31 13:59:09 2008 +0100
27025
27026     [new uImage] Move kernel data find code to get_kernel() routine
27027
27028     Verification of the kernel image (in old format) and finding kernel
27029     data is moved to a dedicated routine. The routine will also hold
27030     support for, to be added, new image format.
27031
27032     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27033
27034 commit 7b325454fd231d4273de3fe373850f777fb086bf
27035 Author: Marian Balakowicz <m8@semihalf.com>
27036 Date:   Thu Jan 31 13:58:20 2008 +0100
27037
27038     [new uImage] Cleanup FDT handling in PPC do_boot_linux()
27039
27040     Move FDT blob finding and relocation to a dedicated
27041     get_fdt() routine. It increases code readability and
27042     will make adding support for new uImage format easier.
27043
27044     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27045
27046 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
27047 Author: Marian Balakowicz <m8@semihalf.com>
27048 Date:   Thu Jan 31 13:58:13 2008 +0100
27049
27050     [new uImage] Cleanup do_botm_linux() boot allocations
27051
27052     This patch moves common pre-boot allocation steps shared between PPC
27053     and M68K to a helper routines:
27054
27055     common:
27056     - get_boot_sp_limit()
27057     - get_boot_cmline()
27058     - get_boot_kbd()
27059
27060     platform:
27061     - set_clocks_in_mhz()
27062
27063     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27064
27065 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
27066 Author: Marian Balakowicz <m8@semihalf.com>
27067 Date:   Thu Jan 31 13:57:17 2008 +0100
27068
27069     [new uImage] Move ramdisk loading to a common routine
27070
27071     Ramdisk loading code, including initrd_high variable handling,
27072     was duplicated for PPC and M68K platforms. This patch creates
27073     common helper routine that is being called from both platform
27074     do_bootm_linux() routines.
27075
27076     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27077
27078 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
27079 Author: Marian Balakowicz <m8@semihalf.com>
27080 Date:   Thu Jan 31 13:55:53 2008 +0100
27081
27082     [new uImage] Removed dead ramdisk code on microblaze architectures
27083
27084     Microblaze do_bootm_linux() includes ramdisk processing code but
27085     the ramdisk does not get used anywhere later on.
27086
27087     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27088
27089 commit 5ad03eb3854c162684222a718b44c0716ea0db03
27090 Author: Marian Balakowicz <m8@semihalf.com>
27091 Date:   Thu Jan 31 13:55:39 2008 +0100
27092
27093     [new uImage] Factor out common image_get_ramdisk() routine
27094
27095     Architecture specific do_bootm_linux() routines share common
27096     ramdisk image processing code. Move this code to a common
27097     helper routine.
27098
27099     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27100
27101 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
27102 Author: Marian Balakowicz <m8@semihalf.com>
27103 Date:   Thu Jan 31 13:20:08 2008 +0100
27104
27105     [new uImage] Move FDT error printing to common fdt_error() routine
27106
27107     FDT error handling in PPC do_bootm_linux() shares the same message format.
27108     This patch moves error message printing to a helper fdt_error() routine.
27109
27110     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27111     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
27112
27113 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
27114 Author: Marian Balakowicz <m8@semihalf.com>
27115 Date:   Thu Jan 31 13:20:07 2008 +0100
27116
27117     [new uImage] Factor out common routines for getting os/arch/type/comp names
27118
27119     Move numeric-id to name translation for image os/arch/type/comp header
27120     fields to a helper routines: image_get_os_name(), image_get_arch_name(),
27121     image_get_type_name(), image_get_comp_name().
27122
27123     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27124
27125 commit e99c26694a384221d336f6448c06a57479c0baa4
27126 Author: Marian Balakowicz <m8@semihalf.com>
27127 Date:   Thu Jan 31 13:20:07 2008 +0100
27128
27129     [new uImage] Remove standalone applications handling from boootm
27130
27131     Standalone applications are supposed to be run using the "go" command.
27132     This patch removes standalone images handling from the do_bootm().
27133
27134     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27135
27136 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
27137 Author: Marian Balakowicz <m8@semihalf.com>
27138 Date:   Thu Jan 31 13:20:07 2008 +0100
27139
27140     [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
27141
27142     Support for OF_FLAT_TREE is to be obsoleted in the near future,
27143     remove related code from the bootm routines.
27144
27145     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27146
27147 commit 82850f3d32a2661868ec6876bed7a22c55cef718
27148 Author: Marian Balakowicz <m8@semihalf.com>
27149 Date:   Thu Jan 31 13:20:06 2008 +0100
27150
27151     [new uImage] Use image API in SH do_bootm_linux() routine
27152
27153     Introduce image handling API for lately added Hitachi SH architecture.
27154
27155     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27156
27157 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
27158 Author: Marian Balakowicz <m8@semihalf.com>
27159 Date:   Thu Jan 31 13:20:06 2008 +0100
27160
27161     [new uImage] Rename architecture specific bootm code files
27162
27163     Implementation of the do_bootm_linux() and other bootm helper routines is
27164     architecture specific code. As such it resides in lib_<arch> directories
27165     in files named <arch>_linux.c
27166
27167     This patch renames those files to a more clear and accurate
27168     lib_<arch>/bootm.c form.
27169
27170     List of the renamed files:
27171        lib_arm/armlinux.c -> lib_arm/bootm.c
27172        lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
27173        lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
27174        lib_i386/i386_linux.c -> lib_i386/bootm.c
27175        lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
27176        lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
27177        lib_mips/mips_linux.c -> lib_mips/bootm.c
27178        lib_nios/nios_linux.c -> lib_nios/bootm.c
27179        lib_nios2/nios_linux.c -> lib_nios2/bootm.c
27180        lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
27181        lib_sh/sh_linux.c -> lib_sh/bootm.c
27182
27183     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27184
27185 commit 7582438c285bf0cef82909d0f232de64ec567a8a
27186 Author: Marian Balakowicz <m8@semihalf.com>
27187 Date:   Thu Jan 31 13:20:06 2008 +0100
27188
27189     [new uImage] Return error on image move/uncompress overwrites
27190
27191     Check for overwrites during image move/uncompress, return with error
27192     when the original image gets corrupted. Report clear message to the user
27193     and prevent further troubles when pointer to the corrupted images is passed
27194     to do_bootm_linux routine.
27195
27196     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27197
27198 commit f13e7b2e993c61fed1f607962501e051940d6e80
27199 Author: Marian Balakowicz <m8@semihalf.com>
27200 Date:   Tue Jan 8 18:12:17 2008 +0100
27201
27202     [new uImage] Cleanup image header pointer use in bootm code
27203
27204     - use single image header pointer instead of a set of auxilliary variables.
27205     - add multi component image helper routines: get component size/data address
27206
27207     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27208
27209 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
27210 Author: Marian Balakowicz <m8@semihalf.com>
27211 Date:   Tue Jan 8 18:17:10 2008 +0100
27212
27213     [new uImage] Cleanup cmd_bootm.c
27214
27215     - sort and cleanup headers, declarations, etc.
27216     - group related routines
27217     - cleanup indentation, white spaces
27218
27219     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27220
27221 commit af13cdbc01eaf88880978bfb4f603e012818ba24
27222 Author: Marian Balakowicz <m8@semihalf.com>
27223 Date:   Tue Jan 8 18:11:45 2008 +0100
27224
27225     [new uImage] Add memmove_wd() common routine
27226
27227     Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
27228
27229     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27230
27231 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
27232 Author: Marian Balakowicz <m8@semihalf.com>
27233 Date:   Tue Jan 8 18:11:44 2008 +0100
27234
27235     [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
27236
27237     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27238
27239 commit 15158971f49255ccef54f0979a942cfd3de2ae52
27240 Author: Marian Balakowicz <m8@semihalf.com>
27241 Date:   Tue Jan 8 18:11:44 2008 +0100
27242
27243     [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
27244
27245     Use image header copy instead of a (possibly corrupted) pointer to
27246     a initial image location.
27247
27248     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27249
27250 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
27251 Author: Marian Balakowicz <m8@semihalf.com>
27252 Date:   Tue Jan 8 18:11:44 2008 +0100
27253
27254     [new uImage] Remove I386 uImage fake_header() routine
27255
27256     I386 targets are not using a uImage format, instead fake header
27257     is added to ram image before it is further processed by bootm.
27258
27259     Remove this fixup and force proper uImage use for I386.
27260
27261     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27262
27263 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
27264 Author: Marian Balakowicz <m8@semihalf.com>
27265 Date:   Tue Jan 8 18:11:44 2008 +0100
27266
27267     [new uImage] Move CHUNKSZ definition to image.h
27268
27269     CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
27270     move this definition to a common header.
27271
27272     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27273
27274 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
27275 Author: Marian Balakowicz <m8@semihalf.com>
27276 Date:   Tue Jan 8 18:11:43 2008 +0100
27277
27278     [new uImage] Move gunzip() common code to common/gunzip.c
27279
27280     Move gunzip(), zalloc() and zfree() to a separate file.
27281     Share zalloc() and zfree() with cramfs uncompress routine.
27282
27283     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27284
27285 commit d45d5a18b6b36688f2365623f9d550566c664b5b
27286 Author: Marian Balakowicz <m8@semihalf.com>
27287 Date:   Tue Jan 8 18:11:43 2008 +0100
27288
27289     [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
27290
27291     Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
27292     readable in PPC variant of do_bootm_linux() routine.
27293
27294     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27295
27296 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
27297 Author: Marian Balakowicz <m8@semihalf.com>
27298 Date:   Tue Jan 8 18:11:43 2008 +0100
27299
27300     [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
27301
27302     PPC implementation of do_bootm_linux() routine is moved to
27303     a dedicated file lib_ppc/ppc_linux.c
27304
27305     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27306
27307 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
27308 Author: Marian Balakowicz <m8@semihalf.com>
27309 Date:   Tue Jan 8 18:14:09 2008 +0100
27310
27311     [new uImage] Define a API for image handling operations
27312
27313     - Add inline helper macros for basic header processing
27314     - Move common non inline code common/image.c
27315     - Replace direct header access with the API routines
27316     - Rename IH_CPU_* to IH_ARCH_*
27317
27318     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27319
27320 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
27321 Author: Marian Balakowicz <m8@semihalf.com>
27322 Date:   Thu Jan 31 13:19:58 2008 +0100
27323
27324     Add missing cmd_ximg.o to common/Makefile
27325
27326     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27327
27328 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
27329 Author: Grzegorz Bernacki <gjb@semihalf.com>
27330 Date:   Mon Jan 28 10:15:02 2008 +0100
27331
27332     ADS5121e: DDR2 init/timing update.
27333
27334     Signed-off-by: John Rigby <jrigby@freescale.com>
27335     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
27336
27337 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
27338 Author: John Rigby <jrigby@freescale.com>
27339 Date:   Wed Jan 30 13:36:57 2008 -0700
27340
27341     Device tree updates
27342
27343     Changes to match 5121 device tree going mainline in 2.6.25.
27344
27345     Change OF_SOC from "soc5121" to plain "soc".
27346     Remove unneeded "ref-frequency" fixups.
27347     Remove "address" enetaddr fixup.
27348
27349     Add bus-frequency fixup for old OF_SOC so old
27350     kernels with old device trees will work with new
27351     u-boot with 66MHz IPS clock
27352
27353     Signed-off-by: John Rigby <jrigby@freescale.com>
27354
27355 commit de55d18df3ff2ea614624e74793de7c43520e0e7
27356 Author: John Rigby <jrigby@freescale.com>
27357 Date:   Wed Jan 30 13:36:56 2008 -0700
27358
27359     Change IPS freq to 66MHz
27360
27361     Recommended frequency is 66MHz
27362     Change divider from 4 to 3.
27363
27364     Signed-off-by: John Rigby <jrigby@freescale.com>
27365
27366 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
27367 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27368 Date:   Mon Jan 14 22:38:55 2008 +0100
27369
27370     xsengine: rename board_post_init to board_late_init
27371
27372     missing migration from "Cleanup of some init functions"
27373     in c837dcb1a316745092567bfe4fb266d0941884ff
27374
27375     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27376
27377 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
27378 Author: Larry Johnson <lrj@acm.org>
27379 Date:   Sat Jan 12 23:35:33 2008 -0500
27380
27381     Add attribute POST_PREREL to ECC memory POST
27382
27383     Signed-off-by: Larry Johnson <lrj@acm.org>
27384
27385 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
27386 Author: Kumar Gala <galak@kernel.crashing.org>
27387 Date:   Thu Jan 17 08:25:45 2008 -0600
27388
27389     QE: Move FDT support into a common file
27390
27391     Move the flat device tree setup for QE related devices into
27392     a common file shared between 83xx & 85xx platforms that have QE's.
27393
27394     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27395
27396 commit d38da537943cd36356b9d3d9d9b60533554b81d8
27397 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27398 Date:   Wed Jan 23 17:20:14 2008 +0100
27399
27400     AVR32: Make SDRAM refresh rate configurable
27401
27402     The existing code assumes the SDRAM row refresh period should always
27403     be 15.6 us. This is not always true, and indeed on the ATNGW100, the
27404     refresh rate should really be 7.81 us.
27405
27406     Add a refresh_period member to struct sdram_info and initialize it
27407     properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
27408     panic() until the refresh_period member is updated properly.
27409
27410     Big thanks to Gerhard Berghofer for pointing out this issue.
27411
27412     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27413
27414 commit 61151cccb660cdb06a07fb283de6089913d7bde0
27415 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27416 Date:   Thu Apr 19 10:10:11 2007 +0200
27417
27418     ATSTK1000: Fix potential flash programming bug
27419
27420     The (now obsolete) atngw100 flash programming code was having problems
27421     programming the onboard at49bv642 chip. The atstk1000 flash
27422     programming code may have the same bug, so import fix for this problem
27423     from the AVR32 Linux BSP.
27424
27425     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27426
27427 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
27428 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27429 Date:   Thu Nov 22 17:04:13 2007 +0100
27430
27431     ATSTK1004: Fix comment about default load address
27432
27433     The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
27434     wouldn't have worked anyway since the board can only access 4MB of
27435     SDRAM.
27436
27437     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27438
27439 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
27440 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27441 Date:   Thu Nov 22 17:01:24 2007 +0100
27442
27443     ATSTK1002: Use SDRAM + 4MB as default load address
27444
27445     Many people run into problems when they compile a big kernel and load
27446     the uImage at the default SDRAM + 2MB address as the kernel will
27447     overwrite the uImage as it is being unpacked. Increase the default
27448     load address so that we can load a 4MB kernel image without any
27449     problems.
27450
27451     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27452
27453 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
27454 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27455 Date:   Thu Nov 22 16:51:39 2007 +0100
27456
27457     ATNGW100: Fix default mtest range
27458
27459     Let mtest cover the whole SDRAM except the last megabyte, which is
27460     where u-boot lives.
27461
27462     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27463
27464 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
27465 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27466 Date:   Tue Jan 22 15:31:56 2008 +0900
27467
27468     sh: Fix register address of SH7722.
27469
27470     The address of SH7722 is wrong by old document.
27471     This patch fixes this problem.
27472
27473     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27474
27475 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
27476 Author: Mike Frysinger <vapier@gentoo.org>
27477 Date:   Mon Feb 4 19:26:57 2008 -0500
27478
27479     new command for displaying strings at specified memory locations
27480
27481     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27482
27483 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
27484 Author: Mike Frysinger <vapier@gentoo.org>
27485 Date:   Mon Feb 4 19:26:57 2008 -0500
27486
27487     rewrite/cleanup Blackfin RTC driver
27488
27489     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27490
27491 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
27492 Author: Mike Frysinger <vapier@gentoo.org>
27493 Date:   Mon Feb 4 19:26:57 2008 -0500
27494
27495     generate u-boot.ldr for Blackfin targets
27496
27497     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27498
27499 commit b779f7a59530436040f157f7841db7ab796542df
27500 Author: Mike Frysinger <vapier@gentoo.org>
27501 Date:   Mon Feb 4 19:26:57 2008 -0500
27502
27503     scrub unused symbols
27504
27505     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27506
27507 commit cc2977acc3bbbb7850f16645dd1081f95335868d
27508 Author: Mike Frysinger <vapier@gentoo.org>
27509 Date:   Mon Feb 4 19:26:57 2008 -0500
27510
27511     move Blackfin cpu object list to respective cpu directories
27512
27513     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27514
27515 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
27516 Author: Mike Frysinger <vapier@gentoo.org>
27517 Date:   Mon Feb 4 19:26:57 2008 -0500
27518
27519     interface to Blackfin on-chip One-Time-Programmable memory
27520
27521     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27522
27523 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
27524 Author: Mike Frysinger <vapier@gentoo.org>
27525 Date:   Mon Feb 4 19:26:56 2008 -0500
27526
27527     add support for memory commands with Blackfin L1 instruction memory
27528
27529     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27530
27531 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
27532 Author: Mike Frysinger <vapier@gentoo.org>
27533 Date:   Mon Feb 4 19:26:56 2008 -0500
27534
27535     use C code rather than inline assembly
27536
27537     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27538
27539 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
27540 Author: Mike Frysinger <vapier@gentoo.org>
27541 Date:   Mon Feb 4 19:26:56 2008 -0500
27542
27543     add Blackfin-specific reginfo command
27544
27545     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27546
27547 commit 0858b835e7ea501ea084d34cef75932f098342bb
27548 Author: Mike Frysinger <vapier@gentoo.org>
27549 Date:   Mon Feb 4 19:26:55 2008 -0500
27550
27551     add support for Blackfin symbol prefixes to examples
27552
27553     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27554
27555 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
27556 Author: Mike Frysinger <vapier@gentoo.org>
27557 Date:   Mon Feb 4 19:26:55 2008 -0500
27558
27559     add Blackfin-specific bdinfo command
27560
27561     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27562
27563 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
27564 Author: Mike Frysinger <vapier@gentoo.org>
27565 Date:   Mon Feb 4 19:26:55 2008 -0500
27566
27567     move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
27568
27569     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27570
27571 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
27572 Author: Mike Frysinger <vapier@gentoo.org>
27573 Date:   Mon Feb 4 19:26:55 2008 -0500
27574
27575     unify the Blackfin board targets
27576
27577     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27578
27579 commit d4d7730853e5d675f76ec666807da3028c91d592
27580 Author: Mike Frysinger <vapier@gentoo.org>
27581 Date:   Mon Feb 4 19:26:55 2008 -0500
27582
27583     punt Blackfin VDSP headers and import sanitized/auto-generated ones
27584
27585     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27586
27587 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
27588 Author: Mike Frysinger <vapier@gentoo.org>
27589 Date:   Mon Feb 4 19:26:54 2008 -0500
27590
27591     always pull in asm/blackfin.h for Blackfin ports
27592
27593     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27594
27595 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
27596 Author: Mike Frysinger <vapier@gentoo.org>
27597 Date:   Mon Feb 4 19:26:54 2008 -0500
27598
27599     add missing __raw versions of Blackfin read/write io functions
27600
27601     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27602
27603 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
27604 Author: Mike Frysinger <vapier@gentoo.org>
27605 Date:   Mon Feb 4 19:26:54 2008 -0500
27606
27607     add the default Blackfin logo used by Blackfin boards with splash screens
27608
27609     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27610
27611 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
27612 Author: Mike Frysinger <vapier@gentoo.org>
27613 Date:   Mon Feb 4 19:26:54 2008 -0500
27614
27615     add some more Blackfin docs
27616
27617     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27618
27619 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
27620 Author: Mike Frysinger <vapier@gentoo.org>
27621 Date:   Mon Feb 4 19:26:54 2008 -0500
27622
27623     make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
27624
27625     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27626
27627 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
27628 Author: Mike Frysinger <vapier@gentoo.org>
27629 Date:   Mon Feb 4 19:26:54 2008 -0500
27630
27631     fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
27632
27633     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27634
27635 commit b45264ee85cbd92020640a32e02fb434fd557108
27636 Author: Mike Frysinger <vapier@gentoo.org>
27637 Date:   Mon Feb 4 19:26:53 2008 -0500
27638
27639     add gitignores for Blackfin pieces
27640
27641     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
27642
27643 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
27644 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27645 Date:   Fri Jan 18 01:14:03 2008 +0100
27646
27647     TFTP: add host ip addr support
27648
27649     allow to use a different server as set in serverip
27650     add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
27651     if not defined the max length will be at 128
27652
27653     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27654
27655 commit e56b4b494cd92def577969f9678395aa22d34c9f
27656 Author: Timur Tabi <timur@freescale.com>
27657 Date:   Wed Jan 9 14:35:26 2008 -0600
27658
27659     85xx,86xx: Determine I2C clock frequencies and store in global_data
27660
27661     Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
27662
27663     Update the get_clocks() function in 85xx and 86xx to determine the I2C
27664     clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
27665
27666     Signed-off-by: Timur Tabi <timur@freescale.com>
27667
27668 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
27669 Author: Wolfgang Denk <wd@denx.de>
27670 Date:   Thu Dec 27 10:56:54 2007 +0100
27671
27672     OMAP5912: fix FIFO handling in UART driver
27673
27674     According to the OMAP5912 Serial Interfaces Reference Guide (see
27675     http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
27676     FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
27677     changed when the baud clock is not running, i. e. when both DLL and
27678     DLH are set to 0.
27679
27680     Thus make sure that DLL and DLH are 0 when writing the FCR.
27681
27682     Signed-off-by: Wolfgang Denk <wd@denx.de>
27683
27684 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
27685 Author: Harald Welte <laforge@openmoko.org>
27686 Date:   Wed Dec 19 15:10:52 2007 +0100
27687
27688     ARM: S3C24x0 SoC NAND controller support
27689
27690     This patch adds NAND support to the S3C24x0 SoC code in u-boot
27691
27692     Signed-off-by: Harald Welte <laforge@openmoko.org>
27693
27694 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
27695 Author: Harald Welte <laforge@openmoko.org>
27696 Date:   Wed Dec 19 14:24:40 2007 +0100
27697
27698     ARM: s3c24xx: Multiple serial port support
27699
27700     This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
27701
27702     Signed-off-by: Harald Welte <laforge@openmoko.org>
27703
27704 commit a25f72f1f73a11de68251fb88c89991e202e68fa
27705 Author: Harald Welte <laforge@openmoko.org>
27706 Date:   Wed Dec 19 14:16:57 2007 +0100
27707
27708     ARM: arm920t: Allow use of 'gd' pointer from IRQ
27709
27710     This patch allows us to use the 'gd' pointer (and thus environment
27711     and everything else associated with it) from interrupt context on
27712     arm920t.
27713
27714     Signed-off-by: Harald Welte <laforge@openmoko.org>
27715
27716 commit be19bd5cd0f454b63298844a0b5377e029b2caad
27717 Author: Harald Welte <laforge@openmoko.org>
27718 Date:   Wed Dec 19 14:19:38 2007 +0100
27719
27720     ARM: arm920/s3c24xx: IRQ demulitplexer callback
27721
27722     This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
27723     plus a stub implementation of it for the S3C2410.
27724
27725     The purpose is to allow arm920t implementations such as the s3c24x0 to
27726     implement interrupt handlers in u-boot without having to touch core
27727     arm920t code.
27728
27729     Signed-off-by: Harald Welte <laforge@openmoko.org>
27730
27731 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
27732 Author: Hebbar <gururajakr@sanyo.co.in>
27733 Date:   Tue Dec 18 16:03:07 2007 -0800
27734
27735     ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
27736
27737     Add ifdef to bdinfo command to display ethernet information
27738     only if CONFIG_CMD_NET is defined for arm modules.
27739
27740     Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
27741
27742 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
27743 Author: Hebbar <gururajakr@sanyo.co.in>
27744 Date:   Tue Dec 18 16:00:54 2007 -0800
27745
27746     ARM: add I2C init function call in lib_arm/board.c
27747
27748     Adds I2C init func call to init sequence for ARM boards. This is
27749     present in ppc,blackfin and other processor init sequence.
27750
27751     Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
27752
27753 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
27754 Author: Stefan Roese <sr@denx.de>
27755 Date:   Fri Feb 1 09:38:29 2008 +0100
27756
27757     ppc4xx: Fix ndfc HW ECC byte order
27758
27759     The current ndfc HW ECC implementation swaps the first two ECC bytes.
27760     But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
27761     so this swapping in the HW ECC driver is bogus. This patch fixes this
27762     problem and now really uses the SMC ECC byte order.
27763
27764     Thanks to Sean MacLennan for pointing this out.
27765
27766     Signed-off-by: Stefan Roese <sr@denx.de>
27767
27768 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
27769 Author: Stefan Roese <sr@denx.de>
27770 Date:   Wed Jan 30 15:35:50 2008 +0100
27771
27772     ppc4xx: Fix GPIO configuration for pcs440ep
27773
27774     The SRD0_PFC0 register was not configured correctly to enable the GPIO's
27775     49-63 for GPIO. They have been configured as trace signals. This patch
27776     fixes this by clearing the corresponding bit.
27777
27778     Signed-off-by: Stefan Roese <sr@denx.de>
27779
27780 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
27781 Author: Stefan Roese <sr@denx.de>
27782 Date:   Wed Jan 30 14:48:28 2008 +0100
27783
27784     ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
27785
27786     Signed-off-by: Stefan Roese <sr@denx.de>
27787
27788 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
27789 Author: Ladislav Michl <ladis@linux-mips.org>
27790 Date:   Fri Dec 7 00:42:32 2007 +0100
27791
27792     ARM: Board voiceblue update
27793
27794     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
27795
27796 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
27797 Author: Ladislav Michl <ladis@linux-mips.org>
27798 Date:   Thu Dec 6 23:24:57 2007 +0100
27799
27800     ARM: AT91RM9200 based boards config cleanup
27801
27802     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
27803
27804     Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
27805     indentation.
27806
27807 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
27808 Author: Ladislav Michl <ladis@linux-mips.org>
27809 Date:   Thu Dec 6 22:59:16 2007 +0100
27810
27811     ARM: Fix at91rm9200dk base address
27812
27813     Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
27814     renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
27815     with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
27816     However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
27817     CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
27818     I'm sending this patch 4th (!) time in hope it produces at least some
27819     reaction.
27820
27821     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
27822
27823     Fix at91rm9200dk base and environment address.
27824
27825 commit c95219fae2a7add7daa2f91aedca65b1698465c7
27826 Author: stefano babic <sbabic@denx.de>
27827 Date:   Tue Nov 20 10:40:24 2007 +0100
27828
27829     MMC for PXA 27X (resubmit)
27830
27831     MMC support for X_Scale PXA is broken and does not work.
27832     Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
27833     There were already some patches around the world but none of them was
27834     merged into the official u-boot tree.
27835
27836     This patch makes order fixing this issue. Resubmit after code cleanup.
27837
27838     Applied and tested on PXA 270 (TrizepsIV module).
27839
27840     Signed-off-by: Stefano Babic <sbabic@denx.de>
27841
27842 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
27843 Author: stefano babic <sbabic@denx.de>
27844 Date:   Tue Nov 20 10:37:04 2007 +0100
27845
27846     Fix gcc issues in pxa-regs.h
27847
27848     Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
27849     issues generates wrong code.
27850     (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
27851     This patch fixes the problem and solves the gcc-4 issues as the linux
27852     kernel does.
27853
27854     Signed-off-by: Stefano Babic <sbabic@denx.de>
27855     Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
27856
27857 commit 7047b388876e7b905b2ec4edb8010543e3641b85
27858 Author: Jens Gehrlein <sew_s@tqs.de>
27859 Date:   Tue Jan 29 08:45:03 2008 +0100
27860
27861     TQM834x: enable DHCP
27862
27863     Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
27864     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27865
27866 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
27867 Author: Jens Gehrlein <sew_s@tqs.de>
27868 Date:   Tue Jan 29 08:45:02 2008 +0100
27869
27870     TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
27871
27872     Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
27873     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27874
27875 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
27876 Author: Ben Warren <biggerbadderben@gmail.com>
27877 Date:   Sat Jan 26 23:41:19 2008 -0500
27878
27879     Fix conditional compilation of mpx8xxx_spi driver
27880
27881     This driver should only compile if CONFIG_MPC8XXX_SPI is set
27882
27883     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27884     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27885
27886 commit 63f732d3d3880feb531f48af247c025bf01462b0
27887 Author: Rafal Jaworowski <raj@semihalf.com>
27888 Date:   Tue Jan 29 17:00:34 2008 +0100
27889
27890     API: Provide dummy halt() in the glue layer.
27891
27892     This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
27893
27894     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
27895
27896 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
27897 Author: Rafal Jaworowski <raj@semihalf.com>
27898 Date:   Tue Jan 29 16:57:38 2008 +0100
27899
27900     API: Convert conditional building to the new scheme.
27901
27902     This fixes a build breakage with CONFIG_API enabled, which appeared after
27903     the recent changes in the U-Boot build system.
27904
27905     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
27906
27907 commit 98b742489c09780be6a832eeaa4e5eff824792bb
27908 Author: Wolfgang Denk <wd@denx.de>
27909 Date:   Fri Jan 25 09:56:17 2008 +0100
27910
27911     inka4x0: remove dead code
27912
27913     Signed-off-by: Wolfgang Denk <wd@denx.de>
27914
27915 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
27916 Author: Becky Bruce <becky.bruce@freescale.com>
27917 Date:   Wed Jan 23 16:31:06 2008 -0600
27918
27919     86xx: Add reginfo command
27920
27921     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27922
27923 commit ddcebcb638715a6278da93b553d5016f99823816
27924 Author: Becky Bruce <becky.bruce@freescale.com>
27925 Date:   Wed Jan 23 16:31:05 2008 -0600
27926
27927     86xx: Add print_laws function to fsl_law.c
27928
27929     This can be used for debug, and will be used by board code
27930     to help implement reginfo.
27931
27932     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27933
27934 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
27935 Author: Becky Bruce <becky.bruce@freescale.com>
27936 Date:   Wed Jan 23 16:31:04 2008 -0600
27937
27938     86xx: Remove old-style law setup code
27939
27940     This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
27941
27942     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27943
27944 commit 713d8186649dae874613d495b0cecaa039a98b30
27945 Author: Becky Bruce <becky.bruce@freescale.com>
27946 Date:   Wed Jan 23 16:31:03 2008 -0600
27947
27948     86xx: Convert sbc8641d to use new law setup code.
27949
27950     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27951
27952 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
27953 Author: Becky Bruce <becky.bruce@freescale.com>
27954 Date:   Wed Jan 23 16:31:02 2008 -0600
27955
27956     86xx: Convert mpc8610hpcd to new law setup method.
27957
27958     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27959
27960 commit 4933b91f8a49e436681f163df3173beb91cac44a
27961 Author: Becky Bruce <becky.bruce@freescale.com>
27962 Date:   Wed Jan 23 16:31:01 2008 -0600
27963
27964     86xx: Support new law setup method and convert mpc8641
27965
27966     Adds the support code in cpu/mpc86xx for the new law setup code
27967     recently created fsl_law.c, and changes the MPC8641HPCN config
27968     to use this code.
27969
27970     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27971
27972 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
27973 Author: Becky Bruce <becky.bruce@freescale.com>
27974 Date:   Wed Jan 23 16:31:00 2008 -0600
27975
27976     86xx: Rearrange the sequence in start.S
27977
27978     * split the BAT initialization so that only 2 BATs (for the boot page
27979     and stack) are programmed very early on.  The rest are initialized later.
27980     * Move other BAT setup,  ccsrbar setup, and law setup later in the code
27981     after translation has been enabled.
27982
27983     These changes will facilitate the moving of law and BAT initialization
27984     to C code, and will aid with 36-bit physical addressing support.
27985
27986     Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27987
27988 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
27989 Author: Wolfgang Denk <wd@denx.de>
27990 Date:   Wed Jan 23 14:41:37 2008 +0100
27991
27992     Coding Style Cleanup; update CHANGELOG
27993
27994     Signed-off-by: Wolfgang Denk <wd@denx.de>
27995
27996 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
27997 Author: Wolfgang Denk <wd@denx.de>
27998 Date:   Wed Jan 23 14:31:17 2008 +0100
27999
28000     Coding Style Cleanup; update CHANGELOG
28001
28002     Signed-off-by: Wolfgang Denk <wd@denx.de>
28003
28004 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
28005 Author: Dave Liu <r63238@freescale.com>
28006 Date:   Fri Jan 18 10:07:04 2008 +0800
28007
28008     mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
28009
28010     The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
28011     cause the 83xx immap broken, so the DMA and PCI will
28012     be failed.
28013
28014     The patch fix the struct spi8xxx and rm struct spi83xx.
28015
28016     Signed-off-by: Dave Liu <daveliu@freescale.com>
28017     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28018
28019 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
28020 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
28021 Date:   Sat Apr 14 17:11:49 2007 +0200
28022
28023     AVR32: ATNGW100 board support
28024
28025     Add support for the ATNGW100 Network Gateway reference design,
28026     including flash, ethernet and MMC support.
28027
28028     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28029
28030 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
28031 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
28032 Date:   Sat Nov 24 18:15:31 2007 +0100
28033
28034     AVR32: Initialize ipaddr, loadaddr and bootfile at startup
28035
28036     I don't know why the relevant layers can't do this by itself, but this
28037     is what ppc does.
28038
28039     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28040
28041 commit 799891ef7b1b3432032ec23466df6b665a797fa4
28042 Author: Michael Schwingen <michael@schwingen.org>
28043 Date:   Fri Jan 18 00:04:28 2008 +0100
28044
28045     Add AcTux board support
28046
28047     Hi,
28048
28049     The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
28050     files that
28051     contain changes for multiple boards, the board-specific files follow as
28052     separate patches.
28053
28054     Signed-off-by: Michael Schwingen <michael@schwingen.org>
28055
28056 commit 66a4344a4d910a11125df7768899ad529719855e
28057 Author: Michael Schwingen <michael@schwingen.org>
28058 Date:   Wed Jan 16 19:53:23 2008 +0100
28059
28060     add AcTux-4 board support
28061
28062     Signed-off-by: Michael Schwingen <michael@schwingen.org>
28063
28064 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
28065 Author: Michael Schwingen <michael@schwingen.org>
28066 Date:   Wed Jan 16 19:51:55 2008 +0100
28067
28068     add AcTux-3 board support
28069
28070     Signed-off-by: Michael Schwingen <michael@schwingen.org>
28071
28072 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
28073 Author: Michael Schwingen <michael@schwingen.org>
28074 Date:   Wed Jan 16 19:51:14 2008 +0100
28075
28076     add AcTux-2 board support
28077
28078     Signed-off-by: Michael Schwingen <michael@schwingen.org>
28079
28080 commit ea99e8f05b7240fd657739e286664664ae160abe
28081 Author: Michael Schwingen <michael@schwingen.org>
28082 Date:   Wed Jan 16 19:50:37 2008 +0100
28083
28084     add AcTux-1 board support
28085
28086     Signed-off-by: Michael Schwingen <michael@schwingen.org>
28087
28088 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
28089 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28090 Date:   Mon Jan 14 19:20:08 2008 +0100
28091
28092     ARM: remove useless function board_post_init
28093
28094     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28095
28096 commit 96bd462942022e4569b582c072a0ed26de1cd19b
28097 Author: Michael Schwingen <michael@schwingen.org>
28098 Date:   Thu Jan 10 14:59:46 2008 +0100
28099
28100     IXP: enable RTS
28101
28102     enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
28103     No handshaking is done, but the active RTS signal allows to
28104     connect to the target using a PC which is using RTS/CTS
28105     handshake, and does no harm if the PC is set to ignore RTS.
28106
28107     Signed-off-by: Michael Schwingen <michael@schwingen.org>
28108
28109 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
28110 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28111 Date:   Mon Jan 7 08:41:34 2008 +0100
28112
28113     IXP: add dynamic microcode addr
28114
28115     allow to load the microde from flash or ram by download it through
28116     the serial or other.
28117
28118     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28119     Acked-by: Stefan Roese <sr@denx.de>
28120
28121 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
28122 Author: Michael Schwingen <michael@schwingen.org>
28123 Date:   Sat Nov 10 15:44:12 2007 +0100
28124
28125     load ixp42x NPE firmware from separate flash block, remove dead code
28126
28127     Hi,
28128
28129     the following patch adds support to move the IXP42X NPE firmware to a
28130     separate flash block, whose start address is defined in
28131     CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
28132     NPE-enabled u-boot without copyright problems due to the NPE firmware.
28133
28134     I hope the patch applies, I get whitespace-related differences in the NPE
28135     files due to trailing whitespace in the original versions.
28136
28137     Signed-off-by: Michael Schwingen <michael@schwingen.org>
28138     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28139
28140 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
28141 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28142 Date:   Tue Jan 15 14:15:46 2008 -0600
28143
28144     ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
28145
28146     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28147     Signed-off by: John Rigby <jrigby@freescale.com>
28148
28149 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
28150 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28151 Date:   Tue Jan 15 14:02:49 2008 -0600
28152
28153     ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
28154
28155     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28156     Signed-off by: John Rigby <jrigby@freescale.com>
28157
28158 commit 777d1abd9796f1c2e148417cc10657e847d318ce
28159 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28160 Date:   Tue Jan 15 14:00:25 2008 -0600
28161
28162     ColdFire: Add MCF547x_8x FEC driver
28163
28164     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28165     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28166     Signed-off by: John Rigby <jrigby@freescale.com>
28167
28168 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
28169 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28170 Date:   Tue Jan 15 13:54:09 2008 -0600
28171
28172     ColdFire: Add MCF547x_8x dma code and header files
28173
28174     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28175     Signed-off by: John Rigby <jrigby@freescale.com>
28176
28177 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
28178 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28179 Date:   Tue Jan 15 13:52:03 2008 -0600
28180
28181     ColdFire: Add MCF547x_8x dma code - 2
28182
28183     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28184     Signed-off by: John Rigby <jrigby@freescale.com>
28185
28186 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
28187 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28188 Date:   Tue Jan 15 13:48:52 2008 -0600
28189
28190     ColdFire: Add MCF547x_8x dma code - 1
28191
28192     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28193     Signed-off by: John Rigby <jrigby@freescale.com>
28194
28195 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
28196 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28197 Date:   Tue Jan 15 13:39:44 2008 -0600
28198
28199     ColdFire: Add MCF547x_8x related header files
28200
28201     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28202     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28203     Signed-off by: John Rigby <jrigby@freescale.com>
28204
28205 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
28206 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28207 Date:   Tue Jan 15 13:37:34 2008 -0600
28208
28209     ColdFire: Add MCF547x_8x cpu arch
28210
28211     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28212     Signed-off by: John Rigby <jrigby@freescale.com>
28213
28214 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
28215 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28216 Date:   Mon Jan 14 17:47:23 2008 -0600
28217
28218     ColdFire: Add MCF5227x cpu and M52277EVB support-3
28219
28220     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28221     Signed-off by: John Rigby <jrigby@freescale.com>
28222
28223 commit c87581027994c148131b2f11aa75501f782ec19a
28224 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28225 Date:   Mon Jan 14 17:46:19 2008 -0600
28226
28227     ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
28228
28229     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28230     Signed-off by: John Rigby <jrigby@freescale.com>
28231
28232 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
28233 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28234 Date:   Mon Jan 14 17:43:33 2008 -0600
28235
28236     ColdFire: Add MCF5227x cpu and M52277EVB support-1
28237
28238     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28239     Signed-off by: John Rigby <jrigby@freescale.com>
28240
28241 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
28242 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28243 Date:   Mon Jan 14 17:35:44 2008 -0600
28244
28245     ColdFire: Fix CFI Flash low level Read/Write macro
28246
28247     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28248     Signed-off by: John Rigby <jrigby@freescale.com>
28249
28250 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
28251 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28252 Date:   Mon Jan 14 17:23:08 2008 -0600
28253
28254     ColdFire: Add M5373EVB platform support - 2
28255
28256     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28257     Signed-off by: John Rigby <jrigby@freescale.com>
28258
28259 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
28260 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28261 Date:   Mon Jan 14 17:19:54 2008 -0600
28262
28263     ColdFire: Add M5373EVB platform support - 1
28264
28265     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28266     Signed-off by: John Rigby <jrigby@freescale.com>
28267
28268 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
28269 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28270 Date:   Mon Jan 14 17:17:03 2008 -0600
28271
28272     ColdFire: Update FlexBus CS for MCF532x
28273
28274     Definition update and change from 16bit to 32bit
28275
28276     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28277     Signed-off by: John Rigby <jrigby@freescale.com>
28278
28279 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
28280 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28281 Date:   Mon Jan 14 17:11:47 2008 -0600
28282
28283     ColdFire: PCI and misc updates for MCF5445x
28284
28285     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28286     Signed-off by: John Rigby <jrigby@freescale.com>
28287
28288 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
28289 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28290 Date:   Mon Jan 14 17:06:55 2008 -0600
28291
28292     ColdFire: MCF5445x header files cleanup
28293
28294     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28295     Signed-off by: John Rigby <jrigby@freescale.com>
28296
28297 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
28298 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28299 Date:   Mon Jan 14 16:59:42 2008 -0600
28300
28301     ColdFire: MCF532x header files cleanup
28302
28303     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28304     Signed-off by: John Rigby <jrigby@freescale.com>
28305
28306 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
28307 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28308 Date:   Mon Jan 14 15:30:15 2008 -0600
28309
28310     ColdFire: Add modules header files
28311
28312     Add CF specific modules header files
28313
28314     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
28315     Signed-off-by: John Rigby <jrigby@freescale.com>
28316
28317 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
28318 Author: Kim Phillips <kim.phillips@freescale.com>
28319 Date:   Thu Jan 17 12:48:00 2008 -0600
28320
28321     codingstyle cleanup for spi driver
28322
28323     ..and rm unused CONFIG_FSL_SPI define
28324
28325     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28326
28327 commit d59feffb42c9f174116db7a82a311df98983dfce
28328 Author: Haiying Wang <Haiying.Wang@freescale.com>
28329 Date:   Wed Jan 16 17:12:12 2008 -0500
28330
28331     FSL: Fix common EEPROM_data structure definition
28332
28333     - Fix EEPROM_data structure definition according to System EEPROM Data Format.
28334     - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
28335       bd->bi_ethaddr.
28336
28337     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
28338
28339 commit 6bee764bd6da510a4aad614880300c968bc7318d
28340 Author: Timur Tabi <timur@freescale.com>
28341 Date:   Wed Jan 16 15:48:12 2008 -0600
28342
28343     86xx: enable command-line editing
28344
28345     Enable command-line editing for all MPC86xx boards.
28346
28347     Signed-off-by: Timur Tabi <timur@freescale.com>
28348
28349 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
28350 Author: Ben Warren <biggerbadderben@gmail.com>
28351 Date:   Wed Jan 16 22:37:42 2008 -0500
28352
28353     Implement hard SPI driver on MPC8349EMDS
28354
28355     This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
28356     This board has an ST M25P40 4Mbit EEPROM on its SPI bus
28357
28358     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28359     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28360
28361 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
28362 Author: Ben Warren <biggerbadderben@gmail.com>
28363 Date:   Wed Jan 16 22:37:35 2008 -0500
28364
28365     Add support for a Freescale non-CPM SPI controller
28366
28367     This patch adds support for the SPI controller found on Freescale PowerPC
28368     processors such as the MCP834x family.  Additionally, a new config option,
28369     CONFIG_HARD_SPI, is added for general purpose SPI controller use.
28370
28371     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28372     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28373
28374 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
28375 Author: Dave Liu <r63238@freescale.com>
28376 Date:   Thu Jan 17 18:23:19 2008 +0800
28377
28378     mpc83xx: Fix the fatal conflict of merge
28379
28380     The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
28381     will cause the mpc8315erdb board can't boot up.
28382
28383     The patch fix that bug, and remove the duplicated #ifdef
28384     CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
28385     MPC8313E processor.
28386
28387     Signed-off-by: Dave Liu <daveliu@freescale.com>
28388     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28389
28390 commit 3259eeaa4148125a81417477f62c05bd67f60587
28391 Author: Larry Johnson <lrj@acm.org>
28392 Date:   Thu Jan 17 08:50:09 2008 -0500
28393
28394     Merge Sequoia beautification into Korat code
28395
28396     Signed-off-by: Larry Johnson <lrj@acm.org>
28397
28398 commit e16925773211291b562e77187061e9dd1d757217
28399 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28400 Date:   Thu Jan 17 07:45:05 2008 +0100
28401
28402     net: add 'ethrotate' environment variable
28403
28404     [PATCH] net: add 'ethrotate' environment variable
28405
28406     This patch replaces the buildtime configuration option
28407     CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
28408     configuration veriable. See README.
28409
28410     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28411     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28412
28413 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
28414 Author: Stefan Roese <sr@denx.de>
28415 Date:   Thu Jan 17 14:29:04 2008 +0100
28416
28417     ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
28418
28419     Signed-off-by: Stefan Roese <sr@denx.de>
28420
28421 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
28422 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28423 Date:   Thu Jan 17 18:07:32 2008 +0900
28424
28425     sh: Remove CONFIG_COMMANDS from MS7720SE config file
28426
28427     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28428
28429 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
28430 Author: Niklaus Giger <niklaus.giger@netstal.com>
28431 Date:   Wed Jan 16 18:39:20 2008 +0100
28432
28433     ppc4xx: Netstal HCU4 board: added various fixes and POST
28434
28435     - Moved some common code to netstal/common/nm_bsp.c.
28436     - sdram initialisation goes go netstal/common/fixed_sdram.c.
28437     - Added support for POST.
28438     - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
28439
28440     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
28441
28442 commit 69b0634a4ee98c9791815600d43b99f626a952f3
28443 Author: Niklaus Giger <niklaus.giger@netstal.com>
28444 Date:   Thu Jan 17 12:53:56 2008 +0100
28445
28446     ppc4xx: netstal/common define routines used by all boards
28447
28448     Added some routines used by all Netstal boards:
28449     - nm_bsp.c: - nm_show_print and
28450             -  common_misc_init_r
28451             - set_params_for_sw_install. Very specific code to handle our SW
28452               installation procedure
28453     - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
28454       to handle sdram initialization.
28455     - nm.h: Common header
28456
28457     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
28458
28459 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
28460 Author: Niklaus Giger <niklaus.giger@netstal.com>
28461 Date:   Wed Jan 16 18:39:18 2008 +0100
28462
28463     ppc4xx: Netstal HCU5 board: added various fixes and POST
28464
28465     - Moved some common code to nestal/common/nm_bsp.c.
28466     - Added support for the vxWorks EDR.
28467     - Enable trace for Lauterbach, if present.
28468     - Added support for POST.
28469     - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
28470
28471     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
28472
28473 commit 4371090e5da77edc7bf9f296364db4801639d9c4
28474 Author: Niklaus Giger <niklaus.giger@netstal.com>
28475 Date:   Wed Jan 16 18:39:08 2008 +0100
28476
28477     ppc4xx: Netstal HCU5 board. Added POST. Various fixes
28478
28479     - Various fixes
28480     - Reduced rom_size from 384 to 320 kB
28481     - Environment is now in flash
28482     - Added POST
28483     - Support for OF
28484
28485     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
28486
28487 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
28488 Author: Niklaus Giger <niklaus.giger@netstal.com>
28489 Date:   Wed Jan 16 18:37:50 2008 +0100
28490
28491     ppc4xx: Netstal HCU4 board. Added POST. Various fixes
28492
28493     - Various fixes
28494     - Reduced rom_size from 384 to 320 kB
28495     - Environment is now in flash
28496     - Added POST
28497     - Support for OF
28498
28499     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
28500
28501 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
28502 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28503 Date:   Thu Jan 17 10:53:08 2008 +0100
28504
28505     ppc4xx: Complete DU440 board support
28506
28507     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28508
28509 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
28510 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28511 Date:   Thu Jan 17 10:52:30 2008 +0100
28512
28513     ppc4xx: Add DU440 board support
28514
28515     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28516
28517 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
28518 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28519 Date:   Thu Jan 17 15:53:52 2008 +0900
28520
28521     sh: Update SuperH SCIF driver
28522
28523     This patch fixed wrong SH7720 CPU macro and changed macro that
28524     calculated value of SCBRR register.
28525
28526     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
28527
28528 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
28529 Author: Grzegorz Bernacki <gjb@semihalf.com>
28530 Date:   Wed Jan 16 15:12:47 2008 +0100
28531
28532     Set ips dividor to 1/4 of csb clock.
28533
28534     Previous setting cause ips clock to be out of spec. This bug was found by John
28535     Rigby from Freescale.
28536
28537     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
28538
28539 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
28540 Author: Kumar Gala <galak@kernel.crashing.org>
28541 Date:   Thu Jan 17 02:19:18 2008 -0600
28542
28543     85xx: Get ride of old TLB setup code
28544
28545     Now that all boards have been converted, remove old config code and the
28546     config option for the new style.
28547
28548     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28549
28550 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
28551 Author: Kumar Gala <galak@kernel.crashing.org>
28552 Date:   Thu Jan 17 02:02:10 2008 -0600
28553
28554     85xx: Convert TQM85xx to new TLB setup
28555
28556     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28557
28558 commit 74121b470c14f7eaf284ee838bffca6f9521069e
28559 Author: Kumar Gala <galak@kernel.crashing.org>
28560 Date:   Thu Jan 17 01:56:32 2008 -0600
28561
28562     85xx: Convert STXGP3 & STXSSA to new TLB setup
28563
28564     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28565
28566 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
28567 Author: Kumar Gala <galak@kernel.crashing.org>
28568 Date:   Thu Jan 17 01:44:34 2008 -0600
28569
28570     85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
28571
28572     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28573
28574 commit 818218bac6a11591e2542c344d2330e0f4e1968b
28575 Author: Kumar Gala <galak@kernel.crashing.org>
28576 Date:   Thu Jan 17 01:31:34 2008 -0600
28577
28578     85xx: Convert PM854/PM856 to new TLB setup
28579
28580     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28581
28582 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
28583 Author: Kumar Gala <galak@kernel.crashing.org>
28584 Date:   Thu Jan 17 01:25:33 2008 -0600
28585
28586     85xx: Convert MPC8540EVAL to new TLB setup
28587
28588     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28589
28590 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
28591 Author: Kumar Gala <galak@kernel.crashing.org>
28592 Date:   Thu Jan 17 01:12:22 2008 -0600
28593
28594     85xx: Convert MPC8568 MDS to new TLB setup
28595
28596     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28597
28598 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
28599 Author: Kumar Gala <galak@kernel.crashing.org>
28600 Date:   Thu Jan 17 01:01:09 2008 -0600
28601
28602     85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
28603
28604     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28605
28606 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
28607 Author: Kumar Gala <galak@kernel.crashing.org>
28608 Date:   Thu Jan 17 00:52:29 2008 -0600
28609
28610     85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
28611
28612     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28613
28614 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
28615 Author: Kumar Gala <galak@kernel.crashing.org>
28616 Date:   Thu Jan 17 00:32:17 2008 -0600
28617
28618     85xx: Convert ATUM8548 to new TLB setup
28619
28620     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28621
28622 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
28623 Author: Kumar Gala <galak@kernel.crashing.org>
28624 Date:   Wed Jan 16 23:11:57 2008 -0600
28625
28626     85xx: Convert MPC8544 DS to new TLB setup
28627
28628     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28629
28630 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
28631 Author: Kumar Gala <galak@kernel.crashing.org>
28632 Date:   Wed Jan 16 22:38:34 2008 -0600
28633
28634     85xx: Reworked initial processor init
28635
28636     Reworked the initial processor initialzation sequence:
28637     * introduced cpu_early_init_f that is run in address space 1 (AS=1)
28638     * Moved TLB/LAW and CCSR init into cpu_early_init_f()
28639     * Reworked initial asm code to do most of the core init before TLBs
28640
28641     The main reasons for these changes are to allow handling of 36-bit phys
28642     addresses in the future and some of the issues that will exist when we
28643     do that.
28644
28645     There are a few caveats on what can be initialized via the LAW and TLB
28646     static tables:
28647     * TLB entry 14/15 can't be initialized via the TLB table
28648     * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
28649       the code that is currently executing.
28650
28651     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28652
28653 commit 44a23cfd6360a68eaa41f945190618a55519eac3
28654 Author: Kumar Gala <galak@kernel.crashing.org>
28655 Date:   Wed Jan 16 22:33:22 2008 -0600
28656
28657     85xx: Introduce new tlb API
28658
28659     Add a set of functions to manipulate TLB entries:
28660      * set_tlb() - write a tlb entry
28661      * invalidate_tlb() - invalidate a tlb array
28662      * disable_tlb() - disable a variable size tlb entry
28663      * init_tlbs() - setup initial tlbs based on static table
28664
28665     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28666
28667 commit be88b1699863c262818f3af7f60173b4d48df8fc
28668 Author: Stefan Roese <sr@denx.de>
28669 Date:   Thu Jan 17 07:50:17 2008 +0100
28670
28671     ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
28672
28673     Signed-off-by: Stefan Roese <sr@denx.de>
28674
28675 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
28676 Author: Kumar Gala <galak@kernel.crashing.org>
28677 Date:   Wed Jan 16 10:04:42 2008 -0600
28678
28679     85xx: Use proper defines for PCI addresses
28680
28681     We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
28682     While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
28683     be used for configuring the PCI ATMU.
28684
28685     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28686
28687 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
28688 Author: Kumar Gala <galak@kernel.crashing.org>
28689 Date:   Wed Jan 16 09:22:29 2008 -0600
28690
28691     85xx: Remove old style of LAW init
28692
28693     All boards are now using the new fsl_law code so we can drop the old version.
28694
28695     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28696
28697 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
28698 Author: Kumar Gala <galak@kernel.crashing.org>
28699 Date:   Wed Jan 16 09:15:29 2008 -0600
28700
28701     85xx: convert remaining 85xx boards over to use new LAW init code
28702
28703     Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
28704     to use new LAW init code.
28705
28706     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28707
28708 commit 572b13afc42710f2957c382a710360429c0e099b
28709 Author: Kumar Gala <galak@kernel.crashing.org>
28710 Date:   Wed Jan 16 09:11:53 2008 -0600
28711
28712     85xx: convert STXGP3/STXSSA over to use new LAW init code
28713
28714     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28715
28716 commit 45f2166ac0233a9263058378f39612bd11f61196
28717 Author: Kumar Gala <galak@kernel.crashing.org>
28718 Date:   Wed Jan 16 09:06:48 2008 -0600
28719
28720     85xx: convert PM854/PM856 over to use new LAW init code
28721
28722     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28723
28724 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
28725 Author: Kumar Gala <galak@kernel.crashing.org>
28726 Date:   Wed Jan 16 09:05:27 2008 -0600
28727
28728     85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
28729
28730     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28731
28732 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
28733 Author: Kumar Gala <galak@kernel.crashing.org>
28734 Date:   Wed Jan 16 01:45:10 2008 -0600
28735
28736     85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
28737
28738     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28739
28740 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
28741 Author: Kumar Gala <galak@kernel.crashing.org>
28742 Date:   Wed Jan 16 01:32:06 2008 -0600
28743
28744     85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
28745
28746     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28747
28748 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
28749 Author: Kumar Gala <galak@kernel.crashing.org>
28750 Date:   Wed Jan 16 01:16:16 2008 -0600
28751
28752     85xx: convert MPC8544 DS over to use new LAW init code
28753
28754     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28755
28756 commit 83d40dfd79fe868796275802f60116d84b9e4395
28757 Author: Kumar Gala <galak@kernel.crashing.org>
28758 Date:   Wed Jan 16 01:13:58 2008 -0600
28759
28760     85xx: Move LAW init code into C
28761
28762     Move the initialization of the LAWs into C code and provide an API
28763     to allow modification of LAWs after init.
28764
28765     Board code is responsible to provide a law_table and num_law_entries.
28766
28767     We should be able to use the same code on 86xx as well.
28768
28769     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
28770
28771 commit bed8ce838a609aaab136d43b25e6df2a520bc854
28772 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28773 Date:   Sat Dec 22 15:03:12 2007 +0100
28774
28775     qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
28776
28777     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28778
28779 commit 0764c164fed6277d359cf132d55187ea34290114
28780 Author: Vlad Lungu <vlad@comsys.ro>
28781 Date:   Wed Jan 16 19:27:51 2008 +0200
28782
28783     MIPS:Target support for qemu -M mips
28784
28785     With serial, NE2000, IDE support. Tested in big-endian mode.
28786     Memory size hard-coded to 128M for now, so don't play with
28787     the -m option.
28788
28789     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
28790
28791 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
28792 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28793 Date:   Fri Jan 11 00:01:37 2008 +0100
28794
28795     Fix nfs command help to reflect that the serverip is optional
28796
28797     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28798     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28799
28800 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
28801 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28802 Date:   Mon Dec 10 22:32:14 2007 +0100
28803
28804     bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
28805
28806     and move is_valid_ether_addr board file
28807
28808     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28809     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28810
28811 commit c2f896b8fc4722e36915903e1942e138e68ce804
28812 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28813 Date:   Wed Jan 16 16:13:31 2008 +0900
28814
28815     drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
28816
28817     rx_status on the memory is basically in LE, but needs to be handled in CPU
28818     endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
28819     it'll work fine.
28820
28821     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28822     Cc: Masami Komiya <mkomiya@sonare.it>
28823     Cc: Lucas Jin <lucasjin@gmail.com>
28824     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28825
28826 commit 96a236746fe6a7b84802afb4ed31536696d34812
28827 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28828 Date:   Wed Jan 16 16:12:26 2008 +0900
28829
28830     drivers/net/rtl8139.c: Fix cache coherency issues
28831
28832     Current driver is meant for cache coherent systems. This patch adds
28833     flush_cache() routines to support cache non-coherent systems.
28834
28835     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28836     Cc: Masami Komiya <mkomiya@sonare.it>
28837     Cc: Lucas Jin <lucasjin@gmail.com>
28838     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28839
28840 commit d1276c76c1e2b5035296689280ba1acb2c425104
28841 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28842 Date:   Wed Jan 16 16:11:14 2008 +0900
28843
28844     drivers/net/rtl8139.c: Fix tx timeout
28845
28846     "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
28847     does, the condition "(currticks() < to)" becomes invalid and immediately
28848     leads to tx timeout error. This patch introduces the fine-graded udely(10)
28849     loops to ease the impact of wrapping around.
28850
28851     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
28852     Cc: Masami Komiya <mkomiya@sonare.it>
28853     Cc: Lucas Jin <lucasjin@gmail.com>
28854     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28855
28856 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
28857 Author: Dave Liu <r63238@freescale.com>
28858 Date:   Fri Jan 11 18:45:28 2008 +0800
28859
28860     TSEC: Add the support for RealTek RTL8211B PHY
28861
28862     Add the support of RealTek RTL8211B PHY, the RTL8211B
28863     PHY only supports RGMII and MII mode.
28864
28865     Signed-off-by: Dave Liu <daveliu@freescale.com>
28866     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28867
28868 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
28869 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
28870 Date:   Wed Jan 16 09:40:41 2008 +0100
28871
28872     Remove annoying debug printout for PHY less boards.
28873
28874     PHY less board prints out lots of "read wrong ...":
28875     read wrong value : mii_id 3,mii_reg 2, base e0102320
28876     read wrong value : mii_id 3,mii_reg 3, base e0102320
28877     UEC: PHY is Generic MII (ffffffff)
28878     read wrong value : mii_id 3,mii_reg 4, base e0102320
28879     read wrong value : mii_id 3,mii_reg 0, base e0102320
28880     read wrong value : mii_id 3,mii_reg 1, base e0102320
28881     read wrong value : mii_id 3,mii_reg 1, base e0102320
28882     read wrong value : mii_id 3,mii_reg 5, base e0102320
28883     read wrong value : mii_id 3,mii_reg 1, base e0102320
28884     read wrong value : mii_id 3,mii_reg 1, base e0102320
28885     read wrong value : mii_id 3,mii_reg 5, base e0102320
28886     FSL UEC0: Full Duplex
28887     FSL UEC0: Speed 100BT
28888     FSL UEC0: Link is up
28889     Using FSL UEC0 device
28890
28891     Make this printout depend on UEC_VERBOSE_DEBUG and
28892     remove its definition in uec_phy.c
28893
28894     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
28895     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28896
28897 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
28898 Author: Kim Phillips <kim.phillips@freescale.com>
28899 Date:   Tue Jan 15 14:11:00 2008 -0600
28900
28901     net: reduce boot latency on QE UEC based boards
28902
28903     actually polling for PHY autonegotiation to finish enables us to remove the
28904     5 second boot prompt latency present on QE based boards.
28905
28906     call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
28907     uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
28908     code shamelessly stolen from tsec driver.
28909
28910     also rm unused CONFIG_RMII_MODE code.
28911
28912     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28913     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
28914     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28915
28916 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
28917 Author: michael.firth@bt.com <michael.firth@bt.com>
28918 Date:   Wed Jan 16 11:40:51 2008 +0000
28919
28920     TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
28921
28922     The current TSEC driver limits MDIO access to the devices that have been configured as attached
28923     to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
28924
28925     Signed-off-by: Michael Firth <michael.firth@bt.com>
28926     Acked-by: Andy Fleming <afleming@freescale.com>
28927     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28928
28929 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
28930 Author: Kim Phillips <kim.phillips@freescale.com>
28931 Date:   Wed Jan 16 00:38:05 2008 -0600
28932
28933     Add support for the MPC837xERDB
28934
28935     MPC837xERDB board support includes:
28936     * DDR2 330MHz hardcoded (soldered on the board)
28937     * Local Bus NOR Flash
28938     * I2C, UART and RTC
28939     * eTSEC RGMII (TSEC0 - RTL8211B with MII;
28940     *          TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
28941     *                  load)
28942
28943     Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
28944     Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
28945     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28946
28947 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
28948 Author: Kim Phillips <kim.phillips@freescale.com>
28949 Date:   Wed Jan 16 12:06:16 2008 -0600
28950
28951     mpc83xx: add support for more system clock performance controls
28952
28953     System registers that are modified are the Arbiter Configuration
28954     Register (ACR), the System Priority Control Register (SPCR), and the
28955     System Clock Configuration Register (SCCR).
28956
28957     Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
28958     Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
28959     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28960
28961 commit 16c3cde050e2d243e62b37486f1558570787beb8
28962 Author: James Yang <james.yang@freescale.com>
28963 Date:   Wed Jan 16 11:58:08 2008 -0600
28964
28965     FSL: Generalize PIXIS reset command parsing.
28966
28967     Before, the order of arguments to the pixis_reset
28968     command needed to be supplied in a hard-coded order.
28969     Generalize the command parsing to allow any order.
28970
28971     Signed-off-by: James Yang <james.yang@freescale.com>
28972     Acked-by: Jon Loeliger <jdl@freescale.com>
28973
28974 commit ad8f8687b78c3e917b173f038926695383c55555
28975 Author: Jon Loeliger <jdl@freescale.com>
28976 Date:   Tue Jan 15 13:42:41 2008 -0600
28977
28978     FSL: Convert board/freescale/common/Makefile to use CONFIG_
28979
28980     Convert the board/freescale/common/Makefile to use
28981     CONFIG_* options to select which files to conditionally
28982     compile into the board/freescale/common library rather
28983     than conditionally compiling entire files.
28984
28985     Now handles::
28986         CONFIG_FSL_PIXIS
28987         CONFIG_FSL_DIU_FB
28988         CONFIG_PQ_MDS_PIB
28989
28990     CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
28991
28992     Signed-off-by: Jon Loeliger <jdl@freescale.com>
28993
28994 commit 7c2221eb230372a9e537c4f6636b147b0909325f
28995 Author: Roy Zang <tie-fei.zang@freescale.com>
28996 Date:   Tue Jan 15 16:38:38 2008 +0800
28997
28998     Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
28999
29000     Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
29001     Remove unused ethernet CONFIG_ options.
29002
29003     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
29004     Acked-by: Jon Loeliger <jdl@freescale.com>
29005
29006 commit 711a7946277d2e29af481011e8635e9975c54e45
29007 Author: Kim Phillips <kim.phillips@freescale.com>
29008 Date:   Tue Jan 15 14:05:14 2008 -0600
29009
29010     mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
29011
29012     continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
29013
29014     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29015
29016 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
29017 Author: Kim Phillips <kim.phillips@freescale.com>
29018 Date:   Tue Jan 15 09:51:12 2008 -0600
29019
29020     mpc83xx: clean up mpc8360emds.c warnings
29021
29022     mpc8360emds.c: In function 'ft_board_setup':
29023     mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
29024     mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
29025     mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
29026     mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
29027     mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
29028     mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
29029
29030     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29031
29032 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
29033 Author: Kim Phillips <kim.phillips@freescale.com>
29034 Date:   Mon Jan 14 16:14:46 2008 -0600
29035
29036     mpc83xx: fix phy-connection-type fixup code
29037
29038     use tree passed to us in local blob, not global fdt.
29039
29040     Also use fdt_path_offset to convert to relative offset, since absolute
29041     reference is needed to check for rgmii-id mode string value.
29042
29043     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29044
29045 commit 2b4c952be7c4357a13e839d48df80853820c33eb
29046 Author: Kumar Gala <galak@kernel.crashing.org>
29047 Date:   Mon Jan 14 09:01:40 2008 -0600
29048
29049     mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
29050
29051     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29052     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29053
29054 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
29055 Author: Poonam Aggrwal <b10812@freescale.com>
29056 Date:   Mon Jan 14 09:41:14 2008 +0530
29057
29058     Changes in uboot DDR configuration for MPC8313eRDB
29059
29060     These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
29061     DDR configuration in u-boot code. Some are related to performance, some
29062     affect stability and some correct few basic errors in the current
29063     configuration.
29064
29065     The changes have been tested and found to give better memory latency
29066     figures on MPC8313eRDB.LMBench figures prove it.
29067
29068     The changes are:
29069
29070     - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
29071       (this may improve performance for application with many read
29072       or write to open pages).
29073     - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
29074       001 (activating all the CS when only one is used may cause
29075       unwanted noise on the system)
29076
29077     - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
29078       Tras=45ns)
29079     - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
29080
29081     - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
29082       comply with the 3 ODT clk requirements)
29083     - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
29084     - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
29085
29086     - DDR_SDRAM_MODE[AL]changed from 0 to 1.
29087     - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
29088
29089     - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
29090     - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
29091
29092     The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
29093     The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
29094
29095     Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
29096     Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
29097     Cc: Razzaz Mazyar <MRazzaz@freescale.com>
29098     Cc: Josep P J <PJ.Joseph@freescale.com>
29099     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29100
29101 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
29102 Author: Jerry Van Baren <gvb.uboot@gmail.com>
29103 Date:   Sat Jan 12 13:24:14 2008 -0500
29104
29105     Enable the isdram command on the MPC8360EMDS board
29106
29107     The isdram command prints out decoded information the "serial presence
29108     detect" (SPD) chip on the SDRAM SIMMs.  This can be very helpful when
29109     debugging memory configuration problems.
29110
29111     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
29112     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29113
29114 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
29115 Author: Dave Liu <r63238@freescale.com>
29116 Date:   Fri Jan 11 18:48:24 2008 +0800
29117
29118     mpc83xx: Add the support for MPC8315ERDB board
29119
29120     The features list:
29121     - Boot from NOR Flash
29122     - DDR2 266MHz hardcoded configuration
29123     - Local bus NOR Flash R/W operation
29124     - I2C, UART, MII and RTC
29125     - eTSEC0/1 support
29126     - PCI host
29127
29128     Signed-off-by: Dave Liu <daveliu@freescale.com>
29129     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29130
29131 commit b05884efa614e4d8a9413158fc228e0dc02ab704
29132 Author: Dave Liu <r63238@freescale.com>
29133 Date:   Fri Jan 11 18:46:50 2008 +0800
29134
29135     mpc83xx: Add config of eTSEC emergency priority in SPCR
29136
29137     The TSEC emergency priority definition of 831x/837x
29138     is different than the definition of 834x in SPCR register.
29139
29140     Add the other config of TSEC emergency priority into
29141     cpu_init.c
29142
29143     Signed-off-by: Dave Liu <daveliu@freescale.com>
29144     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29145
29146 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
29147 Author: Dave Liu <r63238@freescale.com>
29148 Date:   Fri Jan 11 18:42:19 2008 +0800
29149
29150     mpc83xx: Remove cache config from MPC8360ERDK.h
29151
29152     The MPC8360ERDK board support patch is added before
29153     the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
29154     so, miss clean up it.
29155
29156     The patch clean up the miss cache config.
29157
29158     Signed-off-by: Dave Liu <daveliu@freescale.com>
29159     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29160
29161 commit cd9d23053d435c08fc8695017b5cb9003fcda786
29162 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29163 Date:   Mon Jan 14 23:09:32 2008 +0300
29164
29165     nand: FSL UPM NAND driver
29166
29167     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29168
29169 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
29170 Author: Kyungmin Park <kmpark@infradead.org>
29171 Date:   Tue Jan 15 08:59:44 2008 +0900
29172
29173     OneNAND: Separate U-Boot dependent code from OneNAND
29174
29175     OneNAND: Separate U-Boot dependent code from OneNAND
29176
29177     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
29178
29179 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
29180 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29181 Date:   Wed Jan 16 10:33:46 2008 +0100
29182
29183     ppc4xx: Sequoia coding style cleanup and beautification
29184
29185     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29186
29187 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
29188 Author: Larry Johnson <lrj@acm.org>
29189 Date:   Tue Jan 15 14:35:58 2008 -0500
29190
29191     ppc4xx: Refactor ECC POST for AMCC Denali core
29192
29193     The ECC POST reported intermittent failures running after power-up on
29194     the Korat PPC440EPx board.  Even when the test passed, the debugging
29195     output occasionally reported additional unexpected ECC errors.
29196
29197     This refactoring has three main objectives: (1) minimize the code
29198     executed with ECC enabled during the tests, (2) add more checking of the
29199     results so any unexpected ECC errors would cause the test to fail, and
29200     (3) use synchronization (only) where required by the processor.
29201
29202     Signed-off-by: Larry Johnson <lrj@acm.org>
29203
29204 commit 2465665b73ac2f688af945b1ed510752afa816a4
29205 Author: David Saada <David.Saada@ecitele.com>
29206 Date:   Tue Jan 15 10:40:24 2008 +0200
29207
29208     QE UEC: Extend number of supported UECs to 4
29209
29210     This patch extends the number of supported UECs to 4. Note that the
29211     problem of QE thread resources exhaustion is resolved by setting the
29212     correct number of QE threads according to Ethernet type (GBE or FE).
29213
29214     Signed-off-by: David Saada <david.saada@ecitele.com>
29215     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
29216
29217 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
29218 Author: Wolfgang Denk <wd@denx.de>
29219 Date:   Wed Jan 16 00:01:01 2008 +0100
29220
29221     LWMON5: enable hush shell as command line parser
29222
29223     Signed-off-by: Wolfgang Denk <wd@denx.de>
29224
29225 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
29226 Author: Wolfgang Denk <wd@denx.de>
29227 Date:   Tue Jan 15 17:22:28 2008 +0100
29228
29229     ADS5121: disable watchdog; enable image timestamps
29230
29231     Signed-off-by: Wolfgang Denk <wd@denx.de>
29232
29233 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
29234 Author: Wolfgang Denk <wd@denx.de>
29235 Date:   Tue Jan 15 17:21:28 2008 +0100
29236
29237     TK885D: fixes for bigger flash sector sizes on new modules;
29238     adjust default environment;
29239     disable SCC ethernet (not used on this board).
29240
29241     Signed-off-by: Wolfgang Denk <wd@denx.de>
29242
29243 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
29244 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29245 Date:   Tue Jan 15 17:48:13 2008 +0900
29246
29247     pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
29248
29249     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29250
29251 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
29252 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29253 Date:   Tue Jan 15 23:25:25 2008 +0900
29254
29255     sh: Add support SH7710/SH7712
29256
29257     SH7710/SH7712 of SH3 CPU are supported.
29258     SH771X is called SH-Ether, and has the Ether controller in CPU.
29259     The driver of Ether is not included in this patch.
29260
29261     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29262
29263 commit 63a11be68306870e04d3851ed9fa41955cdf4894
29264 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29265 Date:   Tue Jan 15 23:06:17 2008 +0900
29266
29267     sh: Add support of map_physmem() and unmap_physmem() to SuperH
29268
29269     This patch add the support of map_physmem() and unmap_physmem()
29270     used with Common Flash Interface(CFI) driver.
29271
29272     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29273
29274 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
29275 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29276 Date:   Wed Jan 9 14:42:27 2008 +0900
29277
29278     sh: Add maintainer of MS7720SE to the MAINTAINER file
29279
29280     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29281
29282 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
29283 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29284 Date:   Wed Jan 9 14:39:58 2008 +0900
29285
29286     sh: Fix board name in MS7720SE's config.mk
29287
29288     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29289
29290 commit c0a04d93734d768b39dbb72fb501b65614c8615d
29291 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29292 Date:   Wed Jan 9 14:37:36 2008 +0900
29293
29294     sh: Add MS7720SE to MAKEALL
29295
29296     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29297
29298 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
29299 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
29300 Date:   Mon Dec 3 22:58:50 2007 +0900
29301
29302     sh: Add support for MS7720RP02 board
29303
29304     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
29305     CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29306     Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29307
29308 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
29309 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
29310 Date:   Wed Jan 9 14:30:02 2008 +0900
29311
29312     sh: Add support for SH7720 in serial_sh driver.
29313
29314     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
29315     CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29316     Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29317
29318 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
29319 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
29320 Date:   Mon Dec 3 22:58:45 2007 +0900
29321
29322     sh: Add support SH3 and SH7720
29323
29324     Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
29325     CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29326     Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
29327
29328 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
29329 Author: Stefan Roese <sr@denx.de>
29330 Date:   Tue Jan 15 10:11:02 2008 +0100
29331
29332     ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
29333
29334     Signed-off-by: Stefan Roese <sr@denx.de>
29335
29336 commit 17bef68097ab3692500a36fb31115bff7910aa99
29337 Author: Niklaus Giger <niklausgiger@gmx.ch>
29338 Date:   Mon Jan 14 14:04:42 2008 +0100
29339
29340     ppc_4xx: Fix post spr.c for PPC405
29341
29342     post/cpu/ppc4xx/spr.c contained a few checks for registers only present
29343     for PPC440 and derivates processor.
29344
29345     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
29346
29347 commit 06c428bcd4413014b43236e77765022071424fa6
29348 Author: Dave Liu <r63238@freescale.com>
29349 Date:   Mon Jan 14 11:12:01 2008 +0800
29350
29351     QE: fix compile warning
29352
29353     qe.c: In function 'qe_upload_firmware':
29354     qe.c:390: warning: pointer targets in passing argument 2
29355     uec.c: In function 'uec_initialize':
29356     uec.c:1236: warning: 'uec_info' may be used uninitialized
29357
29358     Signed-off-by: Dave Liu <daveliu@freescale.com>
29359
29360 commit a0dd99d51efa55fe023e19c97ead92683725eb11
29361 Author: Stefan Roese <sr@denx.de>
29362 Date:   Mon Jan 14 10:05:05 2008 +0100
29363
29364     ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
29365
29366     Now that bit 29 is the USB PHY reset bit, update the Kilauea port
29367     to remove the USB PHY reset after powerup. The CPLD will keep the
29368     USB PHY in reset (active low) until the bit is set to 1 in
29369     board_early_init_f().
29370
29371     Signed-off-by: Stefan Roese <sr@denx.de>
29372
29373 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
29374 Author: Wolfgang Denk <wd@denx.de>
29375 Date:   Sun Jan 13 23:26:45 2008 +0100
29376
29377     ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
29378
29379     Signed-off-by: Wolfgang Denk <wd@denx.de>
29380
29381 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
29382 Author: Wolfgang Denk <wd@denx.de>
29383 Date:   Sun Jan 13 23:37:50 2008 +0100
29384
29385     ADS5121: Fix typo in ads5121.c, adjust default environment
29386
29387     Signed-off-by: Wolfgang Denk <wd@denx.de>
29388
29389 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
29390 Author: John Rigby <jrigby@freescale.com>
29391 Date:   Fri Aug 24 18:18:43 2007 -0600
29392
29393     ADS5121: MAX slew rate for PATA pins
29394
29395     Signed-off-by: John Rigby <jrigby@freescale.com>
29396
29397 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
29398 Author: Wolfgang Denk <wd@denx.de>
29399 Date:   Sun Jan 13 21:05:52 2008 +0100
29400
29401     Fix Makefile dependency problem with parallel builds.
29402
29403     Signed-off-by: Wolfgang Denk <wd@denx.de>
29404
29405 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
29406 Author: Wolfgang Denk <wd@denx.de>
29407 Date:   Sun Jan 13 19:51:39 2008 +0100
29408
29409     MPC8544DS: fix board Makefile for silent build (with -s)
29410
29411     Signed-off-by: Wolfgang Denk <wd@denx.de>
29412
29413 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
29414 Author: Wolfgang Denk <wd@denx.de>
29415 Date:   Sun Jan 13 16:44:08 2008 +0100
29416
29417     PMC440 board: fix board Makefile for out-of-tree building
29418
29419     Signed-off-by: Wolfgang Denk <wd@denx.de>
29420
29421 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
29422 Author: Wolfgang Denk <wd@denx.de>
29423 Date:   Sun Jan 13 16:07:44 2008 +0100
29424
29425     Makalu: fix compile warning
29426
29427     Signed-off-by: Wolfgang Denk <wd@denx.de>
29428
29429 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
29430 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29431 Date:   Sun Jan 13 12:36:12 2008 +0100
29432
29433     cmd_nand : fix compiler warning.
29434
29435     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29436
29437 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
29438 Author: Michael Schwingen <rincewind@discworld.dascon.de>
29439 Date:   Sat Jan 12 20:29:47 2008 +0100
29440
29441     CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
29442
29443     Signed-off-by: Michael Schwingen <michael@schwingen.org>
29444     Acked-by: Stefan Roese <sr@denx.de>
29445
29446 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
29447 Author: Wolfgang Denk <wd@denx.de>
29448 Date:   Sun Jan 13 02:19:44 2008 +0100
29449
29450     MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
29451
29452     Signed-off-by: Wolfgang Denk <wd@denx.de>
29453
29454 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
29455 Author: Wolfgang Denk <wd@denx.de>
29456 Date:   Sun Jan 13 02:19:13 2008 +0100
29457
29458     MPC8xx FEC driver: fix compiler warning.
29459
29460     Signed-off-by: Wolfgang Denk <wd@denx.de>
29461
29462 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
29463 Author: Wolfgang Denk <wd@denx.de>
29464 Date:   Sun Jan 13 00:59:21 2008 +0100
29465
29466     Fix Makefile dependencies issues; allow silent build
29467
29468     - get rid of "version" target whichdidn't really work
29469     - make autoconf.mk depend on version_autogenerated.h to make sure
29470       to rebuild files as needed
29471     - add XECHO macro to allow for silent build using "make -s"
29472
29473     Signed-off-by: Wolfgang Denk <wd@denx.de>
29474
29475 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
29476 Author: Wolfgang Denk <wd@denx.de>
29477 Date:   Sun Jan 13 00:55:47 2008 +0100
29478
29479     ADS5121e: fix compile warning
29480
29481     Signed-off-by: Wolfgang Denk <wd@denx.de>
29482
29483 commit f2b6f4610627fe3d607620e25082916a01538875
29484 Author: Wolfgang Denk <wd@denx.de>
29485 Date:   Sun Jan 13 00:55:18 2008 +0100
29486
29487     MUNICes: fix board Makefile for remote build directory
29488
29489     Signed-off-by: Wolfgang Denk <wd@denx.de>
29490
29491 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
29492 Author: Oliver Weber <almoeli@gmx.de>
29493 Date:   Wed Jan 9 17:04:38 2008 +0100
29494
29495     MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
29496
29497     Signed-off-by: Oliver Weber <almoeli@gmx.de>
29498
29499 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
29500 Author: Andreas Engel <andreas.engel@ericsson.com>
29501 Date:   Wed Jan 9 17:10:56 2008 +0100
29502
29503     Make bootretry work when command line editing is enabled
29504
29505     Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
29506     This patch fixes the problem.
29507
29508     Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
29509
29510 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
29511 Author: Larry Johnson <lrj@acm.org>
29512 Date:   Fri Jan 11 23:26:18 2008 -0500
29513
29514     Refactor code for "i2c sdram" command
29515
29516     Signed-off-by: Larry Johnson <lrj@acm.org>
29517
29518 commit 0df6b8446c4721b91ce311548114891130371083
29519 Author: Larry Johnson <lrj@acm.org>
29520 Date:   Thu Jan 10 22:23:39 2008 -0500
29521
29522     Fix "i2c sdram" command for DDR2 DIMMs
29523
29524     Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
29525     "i2c sdram" command.  This patch provides correct alternative
29526     interpretations when DDR2 memory is detected.
29527
29528     Signed-off-by: Larry Johnson <lrj@acm.org>
29529
29530 commit 64134f011254123618798ff77c42ba196b2ec485
29531 Author: Wolfgang Denk <wd@denx.de>
29532 Date:   Sat Jan 12 20:31:39 2008 +0100
29533
29534     Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
29535
29536     With recent toolchain versions, some boards would not build because
29537     or errors like this one (here for ocotea board when building with
29538     ELDK 4.2 beta):
29539     ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
29540
29541     For many boards, the .bss section is big enough that it wraps around
29542     at the end of the address space (0xFFFFFFFF), so the problem will not
29543     be visible unless you use a 64 bit tool chain for development. On
29544     some boards however, changes to the code size (due to different
29545     optimizations) we bail out with section overlaps like above.
29546
29547     The fix is to add the NOLOAD attribute to the .bss and .sbss
29548     sections, telling the linker that .bss does not consume any space in
29549     the image.
29550
29551     Signed-off-by: Wolfgang Denk <wd@denx.de>
29552
29553 commit 3afac79ec27b91df185f090b31dad9620779f440
29554 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
29555 Date:   Fri Jan 11 20:42:58 2008 -0600
29556
29557     USB: Add Philips 1561 PCI-OHCI ids
29558     (needed for M5475EVB)
29559
29560     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29561
29562 commit 5e8def6731cd7bec74bff42a16b139de04010353
29563 Author: Wolfgang Denk <wd@denx.de>
29564 Date:   Sat Jan 12 15:51:34 2008 +0100
29565
29566     Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
29567     boards.
29568
29569     Signed-off-by: Heiko Schocher <hs@denx.de>
29570     Signed-off-by: Wolfgang Denk <wd@denx.de>
29571
29572 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
29573 Author: Grzegorz Bernacki <gjb@semihalf.com>
29574 Date:   Fri Jan 11 12:03:43 2008 +0100
29575
29576     MPC512X: Cleanup bus clock names.
29577
29578     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
29579
29580 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
29581 Author: Grzegorz Bernacki <gjb@semihalf.com>
29582 Date:   Tue Jan 8 17:16:59 2008 +0100
29583
29584     MPC512X: Fixed typo in macro name.
29585
29586     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
29587
29588 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
29589 Author: Grzegorz Bernacki <gjb@semihalf.com>
29590 Date:   Tue Jan 8 17:16:15 2008 +0100
29591
29592     ads5121: Added support for FDT.
29593
29594     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
29595
29596 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
29597 Author: Wolfgang Denk <wd@denx.de>
29598 Date:   Sat Jan 12 01:05:50 2008 +0100
29599
29600     Coding Style cleanup; update CHANGELOG.
29601
29602     Signed-off-by: Wolfgang Denk <wd@denx.de>
29603
29604 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
29605 Author: Heiko Schocher <hs@denx.de>
29606 Date:   Fri Jan 11 15:15:17 2008 +0100
29607
29608     Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
29609
29610     Signed-off-by: Timur Tabi <timur@freescale.com>
29611     Signed-off-by: Heiko Schocher <hs@denx.de>
29612
29613 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
29614 Author: Heiko Schocher <hs@denx.de>
29615 Date:   Fri Jan 11 15:15:16 2008 +0100
29616
29617     MUNICes: Set the right CFG_DEFAULT_MBAR value.
29618
29619     Signed-off-by: Heiko Schocher <hs@denx.de>
29620
29621 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
29622 Author: Heiko Schocher <hs@denx.de>
29623 Date:   Fri Jan 11 15:15:15 2008 +0100
29624
29625     added the config File for the MUNICes board.
29626
29627     Signed-off-by: Heiko Schocher <hs@denx.de>
29628
29629 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
29630 Author: Heiko Schocher <hs@denx.de>
29631 Date:   Fri Jan 11 15:15:14 2008 +0100
29632
29633     added basic support for the MUNICes board.
29634
29635     Signed-off-by: Heiko Schocher <hs@denx.de>
29636
29637 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
29638 Author: Wolfgang Denk <wd@denx.de>
29639 Date:   Sat Jan 12 00:39:37 2008 +0100
29640
29641     Update CHANGELOG and MAINTAINERS files.
29642
29643     Signed-off-by: Wolfgang Denk <wd@denx.de>
29644
29645 commit 5ba7390c3cb579172be66888a371707b47b5be4e
29646 Author: Anatolij Gustschin <agust@denx.de>
29647 Date:   Fri Jan 11 02:15:02 2008 +0100
29648
29649     Fix compilation problem in common/cmd_bmp.c
29650
29651     common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
29652     isn't defined. This patch fix this.
29653
29654     Signed-off-by: Anatolij Gustschin <agust@denx.de>
29655
29656 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
29657 Author: Heiko Schocher <hs@denx.de>
29658 Date:   Fri Jan 11 01:12:09 2008 +0100
29659
29660     Fix defaultconfig for the mgcoge board.
29661
29662     Signed-off-by: Heiko Schocher <hs@denx.de>
29663
29664 commit ac9db066b26935f31bff15c98168b19faeb603f3
29665 Author: Heiko Schocher <hs@denx.de>
29666 Date:   Fri Jan 11 01:12:08 2008 +0100
29667
29668     Added support for the mgcoge board from keymile.
29669
29670     Signed-off-by: Heiko Schocher <hs@denx.de>
29671
29672 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
29673 Author: Heiko Schocher <hs@denx.de>
29674 Date:   Fri Jan 11 01:12:07 2008 +0100
29675
29676     Enable SMC microcode relocation patch for SMC1.
29677
29678     Signed-off-by: Heiko Schocher <hs@denx.de>
29679
29680 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
29681 Author: Heiko Schocher <hs@denx.de>
29682 Date:   Fri Jan 11 01:12:06 2008 +0100
29683
29684     Added support for the mgsuvd board from keymile.
29685
29686     Signed-off-by: Heiko Schocher <hs@denx.de>
29687
29688 commit bf05293973b348f6946c9df92cd3c65ece42d0be
29689 Author: James Yang <james.yang@freescale.com>
29690 Date:   Thu Jan 10 16:02:07 2008 -0600
29691
29692     Fix 64-bit vsprintf.
29693
29694     There were some size and unsigned problems.
29695     Also add support for "ll" size modifier in format string like glibc
29696
29697     Signed-off-by: James Yang <James.Yang@freescale.com>
29698     Acked-by: Jon Loeliger <jdl@freescale.com>
29699
29700 commit 92fa37eac530860643afa26ae347af3d23d67309
29701 Author: Larry Johnson <lrj@acm.org>
29702 Date:   Wed Jan 9 12:42:35 2008 -0500
29703
29704     Remove superfluous preprocessor conditionals from LM73 driver
29705
29706     (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
29707
29708     (2) Use conditional Makefile.o.
29709
29710     Signed-off-by: Larry Johnson <lrj@acm.org>
29711
29712 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
29713 Author: Guennadi Liakhovetski <lg@denx.de>
29714 Date:   Thu Jan 10 17:59:07 2008 +0100
29715
29716     Add support for the TK885D baseboard from TELE-DATA
29717
29718     The TK885D board uses a TQM885D module from TQ, this port adds an
29719     own configuration file and adds a last_stage_init() method to
29720     configure the two PHYs, depending on the phy_auto_nego environment
29721     variable.
29722
29723     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
29724
29725 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
29726 Author: Kumar Gala <galak@kernel.crashing.org>
29727 Date:   Thu Jan 10 02:22:05 2008 -0600
29728
29729     Fix compiler warning
29730
29731     main.c: In function 'readline_into_buffer':
29732     main.c:927: warning: unused variable 'p_buf'
29733
29734     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29735
29736 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
29737 Author: Anatolij Gustschin <agust@denx.de>
29738 Date:   Fri Jan 11 14:30:01 2008 +0100
29739
29740     Add Fujitsu CoralP/Lime video driver
29741
29742     Signed-off-by: Anatolij Gustschin <agust@denx.de>
29743     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
29744
29745 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
29746 Author: Anatolij Gustschin <agust@denx.de>
29747 Date:   Fri Jan 11 02:39:47 2008 +0100
29748
29749     Fix video console newline and carriage return handling
29750
29751     Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
29752     are not displayed correctly. This is an attempt to fix
29753     this issue. Also add carriage return handling.
29754
29755     Signed-off-by: Anatolij Gustschin <agust@denx.de>
29756     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
29757
29758 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
29759 Author: Stefan Roese <sr@denx.de>
29760 Date:   Fri Jan 11 15:53:58 2008 +0100
29761
29762     ppc4xx: Fix sdram init on Sequoia boards
29763
29764     Clear possible errors in MCSR resulting from data-eye-search.
29765     If not done, then we could get an interrupt later on when
29766     exceptions are enabled.
29767
29768     Signed-off-by: Stefan Roese <sr@denx.de>
29769
29770 commit d610a60730b7464f6f659db49d264d89a7c71061
29771 Author: Anatolij Gustschin <agust@denx.de>
29772 Date:   Fri Jan 11 15:31:09 2008 +0100
29773
29774     ppc4xx: Rework Lime support for lwmon5
29775
29776     Rework Lime support for lwmon5 using new video driver
29777
29778     Signed-off-by: Anatolij Gustschin <agust@denx.de>
29779
29780 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
29781 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29782 Date:   Fri Jan 11 14:55:16 2008 +0100
29783
29784     ppc4xx: Update PMC440 config file
29785
29786     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29787
29788 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
29789 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29790 Date:   Fri Jan 11 14:55:08 2008 +0100
29791
29792     ppx4xx: Fix sdram init on PMC440 boards
29793
29794     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29795
29796 commit 061aad4d320dddce26247699dcf2875ee2ea1366
29797 Author: Dave Liu <r63238@freescale.com>
29798 Date:   Thu Jan 10 23:09:33 2008 +0800
29799
29800     mpc83xx: Fix the bug of 266MHz data rate DDR
29801
29802     The DDR doesn't work on the 266MHz data rate,
29803     the patch fix the bug.
29804
29805     Signed-off-by: Dave Liu <daveliu@freescale.com>
29806     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29807
29808 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
29809 Author: Dave Liu <r63238@freescale.com>
29810 Date:   Thu Jan 10 23:08:26 2008 +0800
29811
29812     mpc83xx: Make the code more readable
29813
29814     Format the code, make it more readable
29815
29816     Signed-off-by: Dave Liu <daveliu@freescale.com>
29817     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29818
29819 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
29820 Author: Dave Liu <r63238@freescale.com>
29821 Date:   Thu Jan 10 23:07:23 2008 +0800
29822
29823     mpc83xx: Reduce the latency of DDR
29824
29825     Reduce the AL from 2 to 1 clock to improve the performance.
29826
29827     Signed-off-by: Dave Liu <daveliu@freescale.com>
29828     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29829
29830 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
29831 Author: Dave Liu <r63238@freescale.com>
29832 Date:   Thu Jan 10 23:06:05 2008 +0800
29833
29834     mpc83xx: Fix the wrong definition of MPC8315E
29835
29836     According to the latest user manual of MPC8315E,
29837     1) The SVCOD of HRCWL is different than 837x
29838     2) The SCCR has changes
29839
29840     Signed-off-by: Dave Liu <daveliu@freescale.com>
29841     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29842
29843 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
29844 Author: Dave Liu <r63238@freescale.com>
29845 Date:   Thu Jan 10 23:05:00 2008 +0800
29846
29847     mpc83xx: Fix the typo in mpc83xx.h
29848
29849     The SPCR about TSEC priority is wrong.
29850
29851     Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
29852     Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
29853     Signed-off-by: Dave Liu <daveliu@freescale.com>
29854     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29855
29856 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
29857 Author: Dave Liu <r63238@freescale.com>
29858 Date:   Thu Jan 10 23:04:13 2008 +0800
29859
29860     mpc83xx: Fix the typo in global data struct
29861
29862     Fix the typo in global_data.h
29863
29864     Signed-off-by: Dave Liu <daveliu@freescale.com>
29865     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29866
29867 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
29868 Author: Dave Liu <r63238@freescale.com>
29869 Date:   Thu Jan 10 23:03:03 2008 +0800
29870
29871     mpc83xx: Remove cache config from config.h
29872
29873     clean up the cache config from configs.h of board
29874
29875     Signed-off-by: Dave Liu <daveliu@freescale.com>
29876     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29877
29878 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
29879 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29880 Date:   Wed Jan 9 20:57:47 2008 +0300
29881
29882     mpc83xx: add support for the MPC8360E-RDK
29883
29884     This is MPC8360E based board with:
29885     - 256MB fixed SDRAM;
29886     - 8MB Intel Strata NOR flash;
29887     - StMICRO 64MiB NAND flash;
29888     - two 10/100/1000 ethernet ports connected via Broadcom
29889       BCM5481 PHYs;
29890     - two 10/100 ethernet ports connected via National
29891       DP83848 PHYs;
29892     - one PCI and one miniPCI slots;
29893     - four serial ports (two NS16550-compatible, two UCCs);
29894     - four USB ports working through MPC8360E "FHCI" USB controller;
29895     - Fujitsu MB86277 graphics controller;
29896     - Analog to Digital Converter/Touchscreen controller, AD7843
29897       connected to SPI.
29898
29899     Features not supported in this patch are:
29900     - StMICRO 64MiB NAND flash (patch sent);
29901     - MINT framebuffer initialization (patch is pending);
29902     - Fetching production information from the EEPROM via I2C;
29903     - FHCI USB;
29904     - Two slow UCCs used as RS-485 UARTs.
29905
29906     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29907     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29908
29909 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
29910 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
29911 Date:   Wed Jan 9 20:57:40 2008 +0300
29912
29913     mpc83xx: add "fsl, qe" compatible fixups
29914
29915     New device trees will use "fsl,qe" compatible properties.
29916
29917     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
29918     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29919
29920 commit 977b57583a7c34010e566a09a679ec3c1836f996
29921 Author: Kim Phillips <kim.phillips@freescale.com>
29922 Date:   Wed Jan 9 15:24:06 2008 -0600
29923
29924     mpc83xx: add missing CONFIG_HAS_ETH0 defines
29925
29926     the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
29927     is defined; add the define to the missing board configs.
29928
29929     Thanks to Emilian Medve for finding this.
29930
29931     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29932
29933 commit b830b7f1635984ba607219fcbd78597c28eeb529
29934 Author: Becky Bruce <bgill@freescale.com>
29935 Date:   Thu Jan 10 14:00:28 2008 -0600
29936
29937     86xx: Support 2GB DIMMs
29938
29939     Configure the number of bits used to address the banks inside the SDRAM
29940     device.  The default register value of 0 means 2 bits to address 4 banks.
29941     Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
29942
29943     Signed-off-by: Becky Bruce <bgill@freescale.com>
29944
29945 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
29946 Author: Niklaus Giger <niklausgiger@gmx.ch>
29947 Date:   Thu Jan 10 18:50:33 2008 +0100
29948
29949     ppc4xx: Make Sequoia boot vxWorks
29950
29951     vxWorks expects in
29952     TLB 0 a entry for the Machine Check interrupt
29953     TLB 1 a entry for the RAM
29954     TLB 2 a entry for the EBC
29955     TLB 3 a entry for the boot flash
29956
29957     After changing the baudrate to 9600 I had no problems to boot the
29958     vxWorks image as distributed by WindRiver (Revision 2.0/1 from
29959     June 18, 2007)
29960
29961     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
29962
29963 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
29964 Author: Larry Johnson <lrj@arlinx.com>
29965 Date:   Wed Jan 9 23:10:27 2008 -0500
29966
29967     ppc4xx: Fix dflush() to restore DVLIM register
29968
29969     Signed-off-by: Larry Johnson <lrj@acm.org>
29970
29971 commit 252f60b068d1f94190b5bcfda169db582387e15e
29972 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29973 Date:   Thu Jan 10 03:52:44 2008 -0500
29974
29975     Nios2: remove common/cmd_bdinfo.c unused variable.
29976
29977     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29978     Signed-off-by: Scott McNutt <smcnutt@psyent.com>
29979
29980 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
29981 Author: Ben Warren <biggerbadderben@gmail.com>
29982 Date:   Wed Jan 9 18:15:53 2008 -0500
29983
29984     Fix Ethernet init() return codes
29985
29986     Change return values of init() functions in all Ethernet drivers to conform
29987     to the following:
29988
29989         >=0: Success
29990         <0:  Failure
29991
29992     All drivers going forward should return 0 on success.  Current drivers that
29993     return 1 on success were left as-is to minimize changes.
29994
29995     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
29996     Acked-by: Stefan Roese <sr@denx.de>
29997     Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29998     Acked-by: Kim Phillips <kim.phillips@freescale.com>
29999     Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30000     Acked-By: Timur Tabi <timur@freescale.com>
30001
30002 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
30003 Author: Wolfgang Denk <wd@denx.de>
30004 Date:   Thu Jan 10 00:55:14 2008 +0100
30005
30006     Coding Style cleanup; update CHANGELOG
30007
30008     Signed-off-by: Wolfgang Denk <wd@denx.de>
30009
30010 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
30011 Author: Kim Phillips <kim.phillips@freescale.com>
30012 Date:   Wed Jan 9 16:56:54 2008 -0600
30013
30014     Add QE brg freq and correct qe bus freq fdt update code
30015
30016     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30017     Signed-off-by: Andy Fleming <afleming@freescale.com>
30018
30019 commit 890dfef06c2d169a3356359596890754dfb8ee1c
30020 Author: Andy Fleming <afleming@freescale.com>
30021 Date:   Wed Jan 9 16:34:51 2008 -0600
30022
30023     Remove cache config from ATUM8548 and sbc8548 configs
30024
30025     These boards weren't updated by Kumar's config patch because they
30026     weren't in the tree, yet.
30027
30028     Signed-off-by: Andy Fleming <afleming@freescale.com>
30029
30030 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
30031 Author: Timur Tabi <timur@freescale.com>
30032 Date:   Mon Jan 7 13:31:19 2008 -0600
30033
30034     85xx: add ability to upload QE firmware
30035
30036     Define the layout of a binary blob that contains a QE firmware and instructions
30037     on how to upload it.  Add function qe_upload_firmware() to parse the blob and
30038     perform the actual upload.  Add command-line command "qe fw" to take a firmware
30039     blob in memory and upload it.  Update ft_cpu_setup() on 85xx to create the
30040     'firmware' device tree node if U-Boot has uploaded a firmware.  Fully define
30041     'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
30042
30043     Signed-off-by: Timur Tabi <timur@freescale.com>
30044
30045 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
30046 Author: Kumar Gala <galak@kernel.crashing.org>
30047 Date:   Tue Jan 8 01:22:21 2008 -0600
30048
30049     85xx: Remove cache config from configs.h
30050
30051     Either use the standard defines in asm/cache.h or grab the information
30052     at runtime from the L1CFG SPR.
30053
30054     Also, minor cleanup in cache.h to make the code a bit more readable.
30055
30056     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30057
30058 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
30059 Author: robert lazarski <robertlazarski@gmail.com>
30060 Date:   Fri Dec 21 10:39:27 2007 -0500
30061
30062     mpc85xx: Add support for ATUM8548 (updated)
30063
30064     Add support for Instituto Atlantico's ATUM8548 board
30065
30066     Signed-off-by: robert lazarski <robertlazarski@gmail.com>
30067     Signed-off-by: Andy Fleming <afleming@freescale.com>
30068
30069 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
30070 Author: robert lazarski <robertlazarski@gmail.com>
30071 Date:   Fri Dec 21 10:36:37 2007 -0500
30072
30073     mpc85xx: Add support for ATUM8548 (updated)
30074
30075     Add support for Instituto Atlantico's ATUM8548 board
30076
30077     Signed-off-by: robert lazarski <robertlazarski@gmail.com>
30078
30079 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
30080 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
30081 Date:   Thu Dec 13 06:45:14 2007 -0600
30082
30083     mpc85xx: Add support for SBC8548 (updated)
30084
30085     Add support for Wind River's SBC8548 reference board.
30086
30087     Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
30088
30089 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
30090 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
30091 Date:   Thu Dec 13 06:45:08 2007 -0600
30092
30093     mpc85xx: Add support for SBC8548 (updated)
30094
30095     Add support for Wind River's SBC8548 reference board.
30096
30097     Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
30098     Signed-off by: Andy Fleming <afleming@freescale.com>
30099
30100 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
30101 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
30102 Date:   Mon Oct 22 19:58:19 2007 +0400
30103
30104     MPC8568E-MDS: set up QE pario for UART1
30105
30106     To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
30107     be set up appropriately.
30108
30109     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
30110
30111 commit ad162249cb371e9e38971676f09be791e5f3cf4a
30112 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
30113 Date:   Mon Oct 22 18:12:46 2007 +0400
30114
30115     MPC8568E-MDS: reset UCCs to use them reliably
30116
30117     In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
30118     UCCs.
30119
30120     p.s Similar code exists in the Linux kernel board file (for capability
30121     reasons with older U-Boots), but should be removed some day.
30122
30123     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
30124
30125 commit 2146cf56821c3364786ca94a7306008c5824b238
30126 Author: Kumar Gala <galak@kernel.crashing.org>
30127 Date:   Wed Dec 19 01:18:15 2007 -0600
30128
30129     Reworked FSL Book-E TLB macros to be more readable
30130
30131     The old macros made it difficult to know what WIMGE and perm bits
30132     were set for a TLB entry.  Actually use the bit masks for these items
30133     since they are only a single bit.
30134
30135     Also moved the macros into mmu.h out of e500.h since they aren't specific
30136     to e500.
30137
30138     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30139
30140 commit 1d47273d46925929f8f2c1913cd96d7257aade88
30141 Author: Kumar Gala <galak@kernel.crashing.org>
30142 Date:   Tue Dec 18 23:21:51 2007 -0600
30143
30144     Use FSL Book-E MMU macros from Linux Kernel
30145
30146     Grab the FSL Book-E MAS register macros from Linux.  Also added
30147     defines for page sizes up to 4TB and removed SHAREN since it doesnt
30148     really exist.
30149
30150     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30151
30152 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
30153 Author: Andy Fleming <afleming@freescale.com>
30154 Date:   Wed Jan 9 13:51:32 2008 -0600
30155
30156     Fix my own merge stupidity
30157
30158     Way back in August I merged Heiko's patch:
30159     566a494f592: [PCS440EP] upgrade the PCS440EP board
30160
30161     with Jon's CONFIG_COMMANDS patches.
30162
30163     This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
30164
30165     However, in the process, I left out some of Heiko's good changes.
30166
30167     Now Heiko's and Jon's patches are properly merged in fat_register_device()
30168
30169     Signed-off-by: Andy Fleming <afleming@freescale.com>
30170
30171 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
30172 Author: James Yang <James.Yang@freescale.com>
30173 Date:   Wed Jan 9 11:17:49 2008 -0600
30174
30175     Expose parse_line() globally.
30176
30177     Add new function readline_into_buffer() that allows the
30178     output of readline to be put into a pointer to char buffer.
30179
30180     This refactoring allows other functions besides the
30181     main command loop to also use the same input mechanism.
30182
30183     Signed-off-by: James Yang <James.Yang@freescale.com>
30184     Acked-by: Jon Loeliger <jdl@freescale.com>
30185
30186 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
30187 Author: Guennadi Liakhovetski <lg@denx.de>
30188 Date:   Wed Jan 9 01:15:25 2008 +0100
30189
30190     trivial: fix consequences of a bad merge
30191
30192     Fix what looks like a merge artifact.
30193
30194     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30195
30196 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
30197 Author: Zhang Wei <wei.zhang@freescale.com>
30198 Date:   Thu Jan 3 10:51:15 2008 +0800
30199
30200     Add Ctrl combo key support to usb keyboard driver.
30201
30202     Ctrl combo key support is added, which is very useful to input Ctrl-C
30203     for interrupt current job.
30204     Also add usb_event_poll() calling to usb_kbd_testc(), which can get
30205     key input when tstc() is called.
30206
30207     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
30208
30209 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
30210 Author: Marcel Ziswiler <marcel@ziswiler.com>
30211 Date:   Sun Dec 30 03:30:56 2007 +0100
30212
30213     fix various comments
30214
30215     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
30216
30217 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
30218 Author: Marcel Ziswiler <marcel@ziswiler.com>
30219 Date:   Sun Dec 30 03:30:46 2007 +0100
30220
30221     fix comments with new drivers organization
30222
30223     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
30224
30225 commit a9b410dc7d2a4721c408b13abfc037988150f145
30226 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30227 Date:   Fri Dec 28 12:50:59 2007 +0900
30228
30229     Remove the obsolete terse version of do_mii()
30230
30231     We now have more useful version of do_mii() and everybody use it.
30232     Gerald Van Baren says:
30233
30234     > When I originally wrote the mii command 6(!) years ago, I wrote a
30235     > verbose version that printed human readable decomposition of the flags,
30236     > etc., and a terse one that didn't print as much stuff and thus had a
30237     > smaller memory footprint.
30238     >
30239     > It sounds like the terse version has withered and died, apparently
30240     > people are only using the verbose version (which is very understandable,
30241     > I do myself).
30242
30243     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30244     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
30245
30246 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
30247 Author: Mike Frysinger <vapier@gentoo.org>
30248 Date:   Thu Dec 27 13:42:56 2007 -0500
30249
30250     Do not reference sha1.c when building mkimage.
30251
30252     remove sha1.o from mkimage linking since it isn't actually used.
30253
30254     Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
30255
30256 commit b9173af73e524d37c812f210173cf83385c5171a
30257 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30258 Date:   Thu Dec 27 15:39:54 2007 +0900
30259
30260     common/cmd_mii.c: Add sanity argc check
30261
30262     If type mii command without arguments, we suffer from uninitialized argv[]
30263     entries; for example we MIPS get stuck by TLB error.
30264
30265     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30266
30267 commit 500856eb1707ed17d9204baa61dd59948d3b2899
30268 Author: Rafal Jaworowski <raj@semihalf.com>
30269 Date:   Wed Jan 9 19:39:36 2008 +0100
30270
30271     API for external applications.
30272
30273     This is an API for external (standalone) applications running on top of
30274     U-Boot, and is meant to be more extensible and robust than the existing
30275     jumptable mechanism. It is similar to UNIX syscall approach. See api/README
30276     for more details.
30277
30278     Included is the demo application using this new framework (api_examples).
30279
30280     Please note this is still an experimental feature, and is turned off by
30281     default.
30282
30283     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
30284
30285 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
30286 Author: Jon Loeliger <jdl@freescale.com>
30287 Date:   Wed Jan 9 12:14:55 2008 -0600
30288
30289     86xx: Remove cache config from configs.h
30290
30291     Just use the standard defines in asm/cache.h.
30292
30293     Signed-off-by: Jon Loeliger <jdl@freescale.com>
30294
30295 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
30296 Author: Rafal Jaworowski <raj@semihalf.com>
30297 Date:   Wed Jan 9 18:05:27 2008 +0100
30298
30299     Globalize envmatch()
30300
30301     The newly introduced API (routines related to env vars) will need to call
30302     it.
30303
30304     Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
30305
30306 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
30307 Author: Jon Loeliger <jdl@freescale.com>
30308 Date:   Fri Jan 4 12:07:27 2008 -0600
30309
30310     Convert MPC8610HPCD to use libfdt.
30311
30312     Assumes the presence of the aliases node in the DTS to
30313     locate the pci and serial nodes for fixups.
30314
30315     Use consistent fdtaddr and fdtfile in environment variables.
30316
30317     Signed-off-by: Jon Loeliger <jdl@freescale.com>
30318
30319 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
30320 Author: Jon Loeliger <jdl@freescale.com>
30321 Date:   Fri Jan 4 11:58:23 2008 -0600
30322
30323     8610: Fix lingering compile warnings.
30324
30325     Turn off DEBUG.
30326
30327     Signed-off-by: Jon Loeliger <jdl@freescale.com>
30328
30329 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
30330 Author: Wolfgang Denk <wd@denx.de>
30331 Date:   Wed Jan 9 15:14:46 2008 +0100
30332
30333     Coding Style cleanup, update CHANGELOG
30334
30335     Signed-off-by: Wolfgang Denk <wd@denx.de>
30336
30337 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
30338 Author: Mike Frysinger <vapier@gentoo.org>
30339 Date:   Tue Dec 18 04:29:55 2007 -0500
30340
30341     fix easylogo on big endian dev systems
30342
30343     didnt realize how out of shape easylogo actually was until i tried using it.
30344     this patch does byte swapping as need be on the input tga header since the tga
30345     is in little endian but the host could just as well be big endian.  i didnt
30346     bother using bswap macros or such stuff from system headers as nothing in
30347     POSIX dictates byte swapping functionality.
30348
30349     Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
30350
30351 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
30352 Author: Mike Frysinger <vapier@gentoo.org>
30353 Date:   Tue Dec 18 03:23:25 2007 -0500
30354
30355     cleanup easylogo
30356
30357     - make the Makefile not suck
30358     - include proper headers for prototypes
30359     - fix obvious broken handling of strchr() when handling '.' in filenames
30360
30361     Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
30362
30363 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
30364 Author: raptorbrino@aim.com <raptorbrino@aim.com>
30365 Date:   Thu Dec 13 21:23:28 2007 -0500
30366
30367     Fix build problems under Cygwin
30368
30369     This patch allows u-boot to build without error in a cygwin
30370     environment.  Cygwin does not define __u64 in it's
30371     include/asm/types.h file.  The -idirafter flag in the u-boot
30372     build causes the inclusion of the cygwin types.h file as opposed
30373     to u-bot/include/asm/types.h file which does define __u64.
30374     Subsequently, sha1.c compile fails due to unknown symbol.
30375
30376     Signed-off-by: Brian Miller <raptorbrino@netscape.net>
30377
30378 commit 43ef1c381f9195504a2488f5cb909227eb97d475
30379 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
30380 Date:   Fri Nov 30 17:29:59 2007 +0100
30381
30382     cmd_bmp: Add support for displaying gzip compressed bmps
30383
30384     The existing code can show information about a gzip compressed BMP
30385     image, but can't actually display it.
30386
30387     Therefore, move the decompression code out of bmp_info() and use it in
30388     bmp_display() as well in order to display a compressed BMP image.
30389
30390     Also, clean things up a bit and fix a memory leak while we're at it.
30391
30392     [hskinnemoen@atmel.com: a bit of refactoring]
30393     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30394
30395 commit d197ffd8172c6fdef38733424640a9a47295d6e9
30396 Author: Guennadi Liakhovetski <lg@denx.de>
30397 Date:   Thu Nov 29 21:15:56 2007 +0100
30398
30399     Fix and optimize MII operations on FEC (MPC8xx) controllers
30400
30401     This patch fixes several issues at least on a MPC885 based system with two
30402     FEC interfaces used in MII mode.
30403
30404     1. PHY discovery should first read PHY_PHYIDR2 register and only then
30405        PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
30406        otherwise the values read are wrong. Also notice, that PHY discovery
30407        cannot work on MPC88x / MPC87x in setups with both FECs active at all
30408        in its present form, because for both interfaces the registers from FEC
30409        1 are used to communicate over MII.
30410
30411     2. Remove code duplication for resetting the FEC by isolating it into a
30412        separate function.
30413
30414     3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
30415
30416     4. Optimize mii_init() to only reset the FEC 1 controller once.
30417
30418     5. Fix a typo in mii_init() using index i instead of j thus potentially
30419        leading to unpredictable results.
30420
30421     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30422
30423 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
30424 Author: Guennadi Liakhovetski <lg@denx.de>
30425 Date:   Tue Nov 20 13:14:20 2007 +0100
30426
30427     Fix endianness conversions in rtl8169 driver
30428
30429     It is unclear on what platforms this driver has been tested, since
30430     noone up to now defines CONFIG_RTL8169 in the board configuration
30431     header. Now it has been fixed for a big-endian mpc8241 based
30432     linkstation platform. This patch presents the necessary endianness
30433     conversion fixes.
30434
30435     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30436
30437 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
30438 Author: Zhang Wei <wei.zhang@freescale.com>
30439 Date:   Thu Jan 3 10:51:15 2008 +0800
30440
30441     Add Ctrl combo key support to usb keyboard driver.
30442
30443     Ctrl combo key support is added, which is very useful to input Ctrl-C
30444     for interrupt current job.
30445     Also add usb_event_poll() calling to usb_kbd_testc(), which can get
30446     key input when tstc() is called.
30447
30448     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
30449     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30450
30451 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
30452 Author: Wolfgang Denk <wd@denx.de>
30453 Date:   Wed Jan 9 13:43:38 2008 +0100
30454
30455     Coding Style clenaup; update CHANGELOG
30456
30457     Signed-off-by: Wolfgang Denk <wd@denx.de>
30458
30459 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
30460 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30461 Date:   Thu Dec 27 17:13:11 2007 +0100
30462
30463     Remove bit swapping in Xilinx Spartan bitfile loading
30464
30465     This patch removes the unnecessary bit swapping when
30466     booting .bit files with the 'fpga loadb' command.
30467
30468     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30469
30470 commit 437fc7327f0611f82937858f2d80e4cd61b40984
30471 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30472 Date:   Thu Dec 27 17:13:05 2007 +0100
30473
30474     Fix MSB check in Xilinx Spartan slave serial mode
30475
30476     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30477
30478 commit 3bff4ffa33729a42645e328a21e8d16488872958
30479 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30480 Date:   Thu Dec 27 17:12:56 2007 +0100
30481
30482     Add new Xilinx Spartan FPGA types
30483
30484     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30485
30486 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
30487 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30488 Date:   Thu Dec 27 17:12:43 2007 +0100
30489
30490     Add pre and post configuration callbacks for Spartan FPGAs
30491
30492     This patch adds a post configuration callback for Spartan2/3 FPGAs.
30493     pre and post configuration callback are now optional and
30494     not called when the function pointer is set to NULL.
30495
30496     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30497
30498 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
30499 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30500 Date:   Thu Dec 27 17:12:34 2007 +0100
30501
30502     Improve configuration of FPGA subsystem
30503
30504     This patch removes the FPGA subsystem configuration through
30505     the CONFIG_FPGA bitmask configuration option.
30506
30507     See README for the new options:
30508
30509         CONFIG_FPGA,
30510         CONFIG_FPGA_<vendor>,
30511         CONFIG_FPGA_<family>
30512
30513     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30514
30515 commit 95c6bc7d4a3588b452baca610f8c795a83630477
30516 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30517 Date:   Thu Dec 27 16:55:17 2007 +0100
30518
30519     Add Epson RX8025 RTC support
30520
30521     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30522
30523 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
30524 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30525 Date:   Thu Dec 27 16:57:23 2007 +0100
30526
30527     serial: Make default_serial_console() a weak function
30528
30529     With this patch it is possible to reimplement default_serial_console()
30530     in board specific code. This will be done in the upcomming PMC440
30531     U-Boot port. This also allows the lwmon board maintainer to
30532     remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
30533
30534     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30535
30536 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
30537 Author: Harald Welte <laforge@openmoko.org>
30538 Date:   Wed Dec 19 14:14:47 2007 +0100
30539
30540     add 'terminal program' functionality
30541
30542     This patch adds a 'cu' like serial terminal command to u-boot
30543     using which you can access other serial ports from the system console.
30544
30545     OpenMoko uses this in their Neo1973 phones to get access to the GSM
30546     Modem and GPS chip from the bootloader.
30547
30548     Signed-off-by: Harald Welte <laforge@openmoko.org>
30549
30550 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
30551 Author: Harald Welte <laforge@openmoko.org>
30552 Date:   Wed Dec 19 14:12:53 2007 +0100
30553
30554     Re-introduce the 'nand read.oob' and 'nand write.oob' commands
30555     that used to exist with the legacy NAND code
30556
30557     Signed-off-by: Harald Welte <laforge@openmoko.org>
30558
30559 commit f540c42d9564854b19ce9bbb70affe172529fe70
30560 Author: Harald Welte <laforge@openmoko.org>
30561 Date:   Wed Dec 19 14:09:58 2007 +0100
30562
30563     Fix building with CRAMFS but not JFFS2 support
30564
30565     Signed-off-by: Harald Welte <laforge@openmoko.org>
30566
30567 commit 23d0baf967fecdaf1804f045f6339337c5607eec
30568 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30569 Date:   Sat Dec 22 15:52:58 2007 +0100
30570
30571     Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
30572
30573     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30574     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30575
30576 commit 23776ff292966a85d811126933830bed48211826
30577 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30578 Date:   Tue Dec 11 10:53:12 2007 +0100
30579
30580     ARM: support board-specific ethernet PHY init
30581
30582     Add until the new phylib will be arrived
30583
30584     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30585
30586 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
30587 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30588 Date:   Sat Dec 8 16:34:08 2007 +0100
30589
30590     IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
30591
30592     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30593
30594 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
30595 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30596 Date:   Sun Dec 9 11:01:10 2007 +0100
30597
30598     Add missing file in gitignore and comments
30599
30600     based on Linux source tree's .gitignore files
30601
30602     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30603
30604 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
30605 Author: Wolfgang Denk <wd@denx.de>
30606 Date:   Wed Jan 9 11:36:21 2008 +0100
30607
30608     Coding Style cleanup, update CHANGELOG
30609
30610     Signed-off-by: Wolfgang Denk <wd@denx.de>
30611
30612 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
30613 Author: Stefan Roese <sr@denx.de>
30614 Date:   Wed Jan 9 10:38:58 2008 +0100
30615
30616     POST: Execute SPR test after relocation
30617
30618     On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
30619     self modifying code and this doesn't work with stack in d-cache, since
30620     I can't move the code from d-cache to i-cache. We move the SPR test to
30621     be executed a little later, after relocation. Then stack is located in
30622     SDRAM and this self-modifying code is no problem anymore.
30623
30624     Signed-off-by: Stefan Roese <sr@denx.de>
30625
30626 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
30627 Author: Stefan Roese <sr@denx.de>
30628 Date:   Wed Jan 9 10:28:20 2008 +0100
30629
30630     ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
30631
30632     This patch configures the LWMON5 port to use d-cache as init-ram and
30633     the unused GPT0_COMP6 as POST WORD storage.
30634
30635     Signed-off-by: Stefan Roese <sr@denx.de>
30636
30637 commit 1754f50b710194f886b6f2831803d8960171a14d
30638 Author: Stefan Roese <sr@denx.de>
30639 Date:   Wed Jan 9 10:25:46 2008 +0100
30640
30641     ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
30642
30643     The privious 4xx POST implementation only supported storing the POST
30644     WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
30645     we need to store the POST WORD in some other non volatile location.
30646     This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
30647     a location.
30648
30649     Signed-off-by: Stefan Roese <sr@denx.de>
30650
30651 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
30652 Author: Stefan Roese <sr@denx.de>
30653 Date:   Wed Jan 9 10:23:16 2008 +0100
30654
30655     ppc4xx: Add 44x cache locking to better support init-ram in d-cache
30656
30657     This patch adds support for locking the init-ram/stack in d-cache,
30658     so that other regions may use d-cache as well
30659
30660     Note, that this current implementation locks exactly 4k of d-cache,
30661     so please make sure that you don't define a bigger init-ram area. Take
30662     a look at the lwmon5 440EPx implementation as a reference.
30663
30664     Signed-off-by: Stefan Roese <sr@denx.de>
30665
30666 commit 0ddb89601a8d29e808db450366752ffdc6267c53
30667 Author: Wolfgang Denk <wd@denx.de>
30668 Date:   Wed Jan 9 10:16:33 2008 +0100
30669
30670     Fix memset bug in ext2fs_read_file()
30671
30672     ext2fs_read_file() had the function arguments swapped.
30673
30674     Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
30675
30676     Signed-off-by: Wolfgang Denk <wd@denx.de>
30677
30678 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
30679 Author: Markus Klotzbücher <mk@denx.de>
30680 Date:   Tue Jan 5 08:17:15 1988 +0100
30681
30682     Fix problems with usb storage devices on MPC5200 /TQM5200
30683
30684     The MPC5200 OHCI controller operates in big endian, so
30685     CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
30686
30687     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30688
30689 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
30690 Author: Wolfgang Denk <wd@denx.de>
30691 Date:   Tue Jan 8 22:58:27 2008 +0100
30692
30693     Fix compile problem with new env code.
30694
30695     Signed-off-by: Wolfgang Denk <wd@denx.de>
30696
30697 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
30698 Author: Markus Klotzbücher <mk@denx.de>
30699 Date:   Tue Nov 27 10:23:20 2007 +0100
30700
30701     tools: fix fw_printenv tool to compile again
30702
30703     This patch updates the fw_printenv/fw_setenv userspace tool to include
30704     the correct MTD header in order to compile against current kernel
30705     headers. Backward compatibility is preserved by introducing an option
30706     MTD_VERSION which can be set to "old" for compilation using the old MTD
30707     headers. Along with this a number of warnings are fixed.
30708
30709     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30710
30711 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
30712 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30713 Date:   Tue Jan 8 15:40:09 2008 +0100
30714
30715     ppc4xx: assign PCI interrupts on seuqoia boards
30716
30717     Some operating systems rely on assigned PCI interrupts.
30718
30719     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30720
30721 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
30722 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30723 Date:   Tue Jan 8 15:50:49 2008 +0100
30724
30725     ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
30726
30727     This patch allows the use of 4xx interrupt vector number defines
30728     in board specific code outside cpu/ppc4xx.
30729
30730     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30731
30732 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
30733 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30734 Date:   Tue Jan 8 15:39:01 2008 +0100
30735
30736     ppc4xx: Fix UIC2 vector number base
30737
30738     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30739
30740 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
30741 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30742 Date:   Tue Jan 8 12:49:58 2008 +0100
30743
30744     ppc4xx: Update PLB/PCI divider for PMC440 board
30745
30746     This patch updates the PLB/PCI divider when running at
30747     400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
30748
30749     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30750
30751 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
30752 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30753 Date:   Tue Jan 8 11:13:09 2008 +0100
30754
30755     ppc4xx: Disable error message when no NAND chip is installed on PMC440
30756
30757     Add CFG_NAND_QUIET_TEST option to disable error message when
30758     no NAND chip is installed on PMC440 boards.
30759
30760     Disable a couple of config defines that are only used for NAND_U_BOOT.
30761
30762     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30763
30764 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
30765 Author: Wolfgang Denk <wd@denx.de>
30766 Date:   Tue Jan 8 22:58:27 2008 +0100
30767
30768     Fix compile problem with new env code.
30769
30770     Signed-off-by: Wolfgang Denk <wd@denx.de>
30771
30772 commit 6de66b35426312a21174a9bf0576a094e2904bea
30773 Author: Markus Klotzbücher <mk@denx.de>
30774 Date:   Tue Nov 27 10:23:20 2007 +0100
30775
30776     tools: fix fw_printenv tool to compile again
30777
30778     This patch updates the fw_printenv/fw_setenv userspace tool to include
30779     the correct MTD header in order to compile against current kernel
30780     headers. Backward compatibility is preserved by introducing an option
30781     MTD_VERSION which can be set to "old" for compilation using the old MTD
30782     headers. Along with this a number of warnings are fixed.
30783
30784     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30785
30786 commit ad3006fe7e84667021753b74247b0bafd97ba35f
30787 Author: Gerald Van Baren <vanbaren@cideas.com>
30788 Date:   Mon Jan 7 23:47:32 2008 -0500
30789
30790     LIBFDT: use memmove() instead of memcpy()
30791
30792     This is partial patch from the DTC/libfdt
30793     commit  67b6b33b9b413a450a72135b5dc59c0a1e33e647
30794     Author: David Gibson <david@gibson.dropbear.id.au>
30795     Date:   Wed Nov 21 11:56:14 2007 +1100
30796
30797         The patch also fixes one genuine bug caught by valgrind -
30798         _packblocks() in fdt_rw.c was using memcpy() where it should have been
30799         using memmove().
30800
30801     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
30802
30803 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
30804 Author: David Gibson <david@gibson.dropbear.id.au>
30805 Date:   Mon Dec 17 14:42:07 2007 +1100
30806
30807     libfdt: Add more documentation (patch the seventh)
30808
30809     This patch adds more documenting comments to libfdt.h.  Specifically,
30810     these document the read/write functions (not including fdt_open_into()
30811     and fdt_pack(), for now).
30812
30813     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
30814
30815 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
30816 Author: David Gibson <david@gibson.dropbear.id.au>
30817 Date:   Mon Dec 17 14:41:52 2007 +1100
30818
30819     libfdt: Add more documentation (patch the sixth)
30820
30821     This patch adds some more documenting comments to libfdt.h.
30822     Specifically this documents all the write-in-place functions.
30823
30824     Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
30825
30826 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
30827 Author: Gerald Van Baren <vanbaren@cideas.com>
30828 Date:   Sat Dec 29 22:45:27 2007 -0500
30829
30830     Fine grained per property /chosen updating.
30831
30832     Implement a suggestion by Scott Wood to make the /chosen handling fine
30833     grained.  Don't overwrite pre-existing properties on a per-property basis,
30834     so if /chosen exists but a necessary /chosen/property doesn't, it gets
30835     created.  If a /chosen property exists, it is NOT overwritten unless the
30836     "force" flag is true.
30837
30838     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
30839
30840 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
30841 Author: Gerald Van Baren <vanbaren@cideas.com>
30842 Date:   Sat Jan 5 15:33:29 2008 -0500
30843
30844     Improve the FDT help message.
30845
30846     Add a note that "fdt copy" makes the new address active.
30847     Remove most of the extra hints at the end of the fdt help.
30848
30849     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
30850
30851 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
30852 Author: Gerald Van Baren <vanbaren@cideas.com>
30853 Date:   Sat Jan 5 14:52:04 2008 -0500
30854
30855     Support setting FDT properties with optional values.
30856
30857     Fix a bug found and documented by Bartlomiej Sieka where the optional
30858     value on "fdt set <path> <prop> [<val>]" wasn't optional.
30859
30860     => fdt mknode / testnode
30861     => fdt print /testnode
30862     testnode {
30863     };
30864     => fdt set /testnode testprop
30865     => fdt print /testnode
30866     testnode {
30867             testprop;
30868     };
30869
30870     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
30871
30872 commit 22fb2246df91bfc840d87f0c5910818bad55577a
30873 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30874 Date:   Fri Dec 28 11:56:30 2007 +0100
30875
30876     Add fdt_find_and_setprop() to fdt_support.h
30877
30878     fdt_find_and_setprop() is used by several 4xx boards and it's
30879     missing in the appropriate header. This patch eliminates a
30880     warning when building U-Boot for such boards.
30881
30882     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30883     Acked-by: Stefan Roese <sr@denx.de>
30884
30885 commit 802b769bac17b0560d3535a42c502469ee190cd1
30886 Author: Stefan Roese <sr@denx.de>
30887 Date:   Tue Jan 8 18:39:30 2008 +0100
30888
30889     ppc4xx: Return 0 on success in 4xx ethernet driver
30890
30891     Signed-off-by: Stefan Roese <sr@denx.de>
30892
30893 commit 6775c68683a53c7abc778774641aac6f833a2cbf
30894 Author: Kim Phillips <kim.phillips@freescale.com>
30895 Date:   Tue Jan 8 09:59:49 2008 -0600
30896
30897     mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
30898
30899     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30900
30901 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
30902 Author: Kim Phillips <kim.phillips@freescale.com>
30903 Date:   Thu Dec 20 16:28:34 2007 -0600
30904
30905     mpc83xx: rm remaining FLAT_TREE code
30906
30907     ..in board pci.c files
30908
30909     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30910
30911 commit b3458d2cd55d01732e30a76d898afd99e871cd67
30912 Author: Kim Phillips <kim.phillips@freescale.com>
30913 Date:   Thu Dec 20 15:57:28 2007 -0600
30914
30915     mpc83xx: remove FLAT_TREE code
30916
30917     need to rm it from pci code, too!
30918
30919     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30920
30921 commit 5b8bc606c61456566af6912f818a153b6b06f242
30922 Author: Kim Phillips <kim.phillips@freescale.com>
30923 Date:   Thu Dec 20 14:09:22 2007 -0600
30924
30925     mpc83xx: convert to using do_fixup_*()
30926
30927     convert to using simpler mpc85xx style fdt update code; streamline by
30928     eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
30929     the old school FLAT_TREE code from 83xx (since the sbc8349 was just
30930     converted over to using libfdt).
30931
30932     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30933
30934 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
30935 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
30936 Date:   Thu Dec 20 12:58:51 2007 -0500
30937
30938     sbc8349: enable libfdt by default on WRS SBC8349 board.
30939
30940     Make libfdt the default for the WRS SBC8349 board.
30941     Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
30942     done for the other 83xx based boards.  Also fix a typo in CONFIG_PCI.
30943
30944     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
30945
30946 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
30947 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
30948 Date:   Thu Dec 20 12:58:16 2007 -0500
30949
30950     sbc8349: migrate board to libfdt
30951
30952     This adds libfdt support code for the Wind River sbc8349 board.
30953
30954     Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
30955     the other Freescale 83xx boards.
30956
30957     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
30958
30959 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
30960 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
30961 Date:   Thu Dec 20 12:56:19 2007 -0500
30962
30963     sbc8349: Remove board specific ECC code
30964
30965     ECC code is now shared for all 83xx boards, so remove board specific one.
30966     See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
30967
30968     Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
30969
30970 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
30971 Author: Kim Phillips <kim.phillips@freescale.com>
30972 Date:   Thu Dec 20 01:30:48 2007 -0600
30973
30974     mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
30975
30976     continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
30977
30978     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30979
30980 commit ccf21c311e68d48399eff1e72936052885f6e3f7
30981 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
30982 Date:   Thu Dec 6 16:43:40 2007 +0100
30983
30984     Add support CONFIG_UEC_ETH3 in MPC83xx
30985
30986     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
30987
30988 commit e6af9932d31171e35db880e7b2f29f903b1b7660
30989 Author: Kumar Gala <galak@kernel.crashing.org>
30990 Date:   Mon Nov 26 11:00:54 2007 -0600
30991
30992     Remove CONFIG options related to OF that we dont use
30993
30994     The MPC8360E MDS config defined:
30995         CONFIG_OF_HAS_BD_T
30996         CONFIG_OF_HAS_UBOOT_ENV
30997
30998     Which we don't use or ever needed.  This seems like copy-paste feature creep.
30999
31000     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31001
31002 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
31003 Author: Kim Phillips <kim.phillips@freescale.com>
31004 Date:   Mon Dec 10 14:16:22 2007 -0600
31005
31006     mpc83xx: supress compiler warning
31007
31008     mpc8360emds.c: In function ‘ft_board_setup’:
31009     mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
31010     mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
31011
31012     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31013
31014 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
31015 Author: Kim Phillips <kim.phillips@freescale.com>
31016 Date:   Tue Nov 27 14:17:29 2007 -0600
31017
31018     mpc83xx: fix remaining fdt_find_node_by_path references
31019
31020     rename to fdt_path_offset
31021
31022     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31023
31024 commit 921d4b19ad1be704df58725485d9292dc0414adf
31025 Author: Kim Phillips <kim.phillips@freescale.com>
31026 Date:   Mon Nov 19 12:30:09 2007 -0600
31027
31028     mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
31029
31030     Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
31031     This change guarantees that the environment will be located on the
31032     first flash sector after the U-Boot image.
31033
31034     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31035
31036 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
31037 Author: Kim Phillips <kim.phillips@freescale.com>
31038 Date:   Fri Nov 9 14:28:08 2007 -0600
31039
31040     mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
31041
31042     u-boot itself uses GMII mode on the 8360.  Fix up UCC phy-connection-type
31043     properties in the device tree so the PHY gets configured for internal delay on
31044     RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
31045
31046     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31047
31048 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
31049 Author: Dave Liu <r63238@freescale.com>
31050 Date:   Tue Sep 18 12:41:15 2007 +0800
31051
31052     mpc83xx: update the CREDITS and MAINTAINERS
31053
31054     update the CREDITS and MAINTAINERS.
31055
31056     Signed-off-by: Dave Liu <daveliu@freescale.com>
31057
31058 commit b21add4b42af7b767448251b599b91066a160e0d
31059 Author: Dave Liu <r63238@freescale.com>
31060 Date:   Tue Sep 18 12:40:21 2007 +0800
31061
31062     mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
31063
31064     Add the MAINTAINER and MAKEALL entries for mpc837xemds
31065
31066     Signed-off-by: Dave Liu <daveliu@freescale.com>
31067
31068 commit f8900ce9094c462355eb792eea264ff16ac8fd16
31069 Author: Dave Liu <r63238@freescale.com>
31070 Date:   Tue Sep 18 12:38:53 2007 +0800
31071
31072     mpc83xx: Add the MPC837xEMDS board readme
31073
31074     Add the README.mpc837xemds to /doc
31075
31076     Signed-off-by: Dave Liu <daveliu@freescale.com>
31077
31078 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
31079 Author: Dave Liu <r63238@freescale.com>
31080 Date:   Tue Sep 18 12:37:57 2007 +0800
31081
31082     mpc83xx: Add the support of MPC837xEMDS board
31083
31084     The MPC837xEMDS board support:
31085     * DDR2 400MHz hardcoded and SPD init
31086     * Local bus NOR Flash
31087     * I2C, UART, MII and RTC
31088     * eTSEC RGMII
31089     * PCI host
31090
31091     Signed-off-by: Dave Liu <daveliu@freescale.com>
31092
31093 commit 555da61702771fe0f76f3de23b4e7590f3704161
31094 Author: Dave Liu <r63238@freescale.com>
31095 Date:   Tue Sep 18 12:36:58 2007 +0800
31096
31097     mpc83xx: Add the support of MPC8315E SoC
31098
31099     The MPC8315E SoC including e300c3 core and new IP blocks,
31100     such as TDM, PCI Express and SATA controller.
31101
31102     Signed-off-by: Dave Liu <daveliu@freescale.com>
31103
31104 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
31105 Author: Dave Liu <r63238@freescale.com>
31106 Date:   Tue Sep 18 12:36:11 2007 +0800
31107
31108     mpc83xx: Add the support of MPC837x SoC
31109
31110     The MPC837x SoC including e300c4 core and new IP blocks,
31111     such as SDHC, PCI Express and SATA controller.
31112
31113     Signed-off-by: Dave Liu <daveliu@freescale.com>
31114
31115 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
31116 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
31117 Date:   Wed Nov 14 18:54:53 2007 +0300
31118
31119     MPC8360E-MDS: configure and enable second UART
31120
31121     Despite user manual, BCSR9.7 is negated (high) on HRST, so
31122     UART2 is disabled. Fix that and configure QE pins properly.
31123
31124     Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
31125
31126 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
31127 Author: Timur Tabi <timur@freescale.com>
31128 Date:   Mon Nov 5 09:34:06 2007 -0600
31129
31130     83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
31131
31132     Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
31133     currently-defined 83xx boards.  This change guarantees that the environment
31134     will be located on the first flash sector after the U-Boot image.
31135
31136     Signed-off-by: Timur Tabi <timur@freescale.com>
31137     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31138
31139 commit e05329516a13616b53240cd85b739217c2bf87f1
31140 Author: Larry Johnson <lrj@acm.org>
31141 Date:   Fri Jan 4 13:27:02 2008 -0500
31142
31143     ppc4xx: Remove weak binding from common Denali data-eye search code
31144
31145     Now that there are no board-specific versions of
31146     "denali_core_search_data_eye()", the weak binding on the common version
31147     can be removed.
31148
31149     Signed-off-by: Larry Johnson <lrj@acm.org>
31150
31151 commit 5ba576c01602fd328800a427964c36a0a05c5dce
31152 Author: Stefan Roese <sr@denx.de>
31153 Date:   Sat Jan 5 09:13:46 2008 +0100
31154
31155     ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
31156
31157     Signed-off-by: Stefan Roese <sr@denx.de>
31158
31159 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
31160 Author: Stefan Roese <sr@denx.de>
31161 Date:   Sat Jan 5 09:12:41 2008 +0100
31162
31163     ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
31164
31165     On Katmai the complete auto-calibration somehow doesn't seem to
31166     produce the best results, meaning optimal values for RQFD/RFFD.
31167     This was discovered by GDA using a high bandwidth scope,
31168     analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
31169     so now on Katmai "only" RFFD is auto-calibrated.
31170
31171     This patch also adds RDCC calibration as mentioned on page 7 of
31172     the AMCC PowerPC440SP/SPe DDR2 application note:
31173     "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
31174
31175     Signed-off-by: Stefan Roese <sr@denx.de>
31176
31177 commit 49db47b8ae6afff2b898be312948ff501357dc80
31178 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31179 Date:   Wed Jan 2 16:48:42 2008 +0100
31180
31181     ppc4xx: Remove sdram.h from PMC440 board
31182
31183     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31184
31185 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
31186 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31187 Date:   Wed Jan 2 16:48:34 2008 +0100
31188
31189     ppc4xx: use common denali core defines and data eye search code for PMC440
31190
31191     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31192
31193 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
31194 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31195 Date:   Wed Jan 2 12:05:14 2008 +0100
31196
31197     ppc4xx: More cleanup for esd's LCD code
31198
31199     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31200
31201 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
31202 Author: Stefan Roese <sr@denx.de>
31203 Date:   Fri Jan 4 12:00:01 2008 +0100
31204
31205     ppc4xx: Fix Sequoia NAND booting target
31206
31207     The Sequoia NAND booting target now uses the recently extracted
31208     cpu/ppc4xx/denali_data_eye.c file too.
31209
31210     Signed-off-by: Stefan Roese <sr@denx.de>
31211
31212 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
31213 Author: Lawrence R. Johnson <lrj@acm.org>
31214 Date:   Thu Jan 3 15:02:02 2008 -0500
31215
31216     ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
31217
31218     Signed-off-by: Larry Johnson <lrj@acm.org>
31219
31220 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
31221 Author: Lawrence R. Johnson <lrj@acm.org>
31222 Date:   Fri Jan 4 02:11:56 2008 -0500
31223
31224     ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
31225
31226     Note: this patch changes the configuration of some GPIO registers:
31227
31228        Register      Old Value   New Value
31229     ---------------  ----------  ----------
31230     DCR GPIO0_TCR    0x0000000F  0x0000F0CF
31231     DCR GPIO0_TSRH   0x55005000  0x00000000
31232     DCR GPIO1_TCR    0xC2000000  0xE2000000
31233     DCR GPIO1_TSRL   0x0C000000  0x00200000
31234     DCR GPIO1_ISR2L  0x00050000  0x00110000
31235
31236     Signed-off-by: Larry Johnson <lrj@acm.org>
31237
31238 commit 5ab884b254ca2e707ab50545cd705f30108cf491
31239 Author: Lawrence R. Johnson <lrj@acm.org>
31240 Date:   Thu Jan 3 18:54:00 2008 -0500
31241
31242     ppc4xx: Add functionality to GPIO support
31243
31244     This patch makes two additions to GPIO support:
31245
31246     First, it adds function gpio_read_in_bit() to read the a bit from the
31247     GPIO Input Register (GPIOx_IR) in the same way that function
31248     gpio_read_out_bit() reads a bit from the GPIO Output Register
31249     (GPIOx_OR).
31250
31251     Second, it modifies function gpio_set_chip_configuration() to provide
31252     an additional option for configuring the GPIO from the
31253     "CFG_4xx_GPIO_TABLE".
31254
31255     According to the 440EPx User's Manual, when an alternate output is used,
31256     the three-state control is configured in one of two ways, depending on
31257     the particular output.  The first option is to select the corresponding
31258     alternate three-state control in the GPIOx_TRSH/L registers.  The second
31259     option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
31260     the GPIOx_TRSH/L registers, and set the corresponding bit in the
31261     GPIOx_TCR register to enable the output.  For example, the Manual
31262     specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
31263     the alternate three-state control (first option), and specifies
31264     configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
31265     enabled in the GPIOx_TCR register (second option).
31266
31267     Currently, gpio_set_chip_configuration() configures all alternate signal
31268     outputs to use the first option.  This patch allow the second option to
31269     be selected by setting the "out_val" element in the table entry to
31270     "GPIO_OUT_1".  The first option is used when the "out_val" element is
31271     set to "GPIO_OUT_0".  Because "out_val" is not currently used when an
31272     alternate signal is selected, and because all current GPIO tables set
31273     "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
31274     not change any existing configurations.
31275
31276     Signed-off-by: Larry Johnson <lrj@acm.org>
31277
31278 commit 196404cdc1de495d6182e84731c200fc5748df15
31279 Author: Larry Johnson <lrj@arlinx.com>
31280 Date:   Sun Dec 30 01:01:54 2007 -0500
31281
31282     PPC4xx: Remove sdram.h from board/lwmon5
31283
31284     These definitions are now in "include/ppc440.h".
31285
31286     Signed-off-by: Larry Johnson <lrj@acm.org>
31287
31288 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
31289 Author: Larry Johnson <lrj@arlinx.com>
31290 Date:   Sun Dec 30 01:01:32 2007 -0500
31291
31292     PPC4xx: Use common code for LWMON5 board SDRAM support
31293
31294     This patch also modifies the functionality of the code so that the data-eye
31295     search is now done with with the cache disabled.
31296
31297     Signed-off-by: Larry Johnson <lrj@acm.org>
31298
31299 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
31300 Author: Larry Johnson <lrj@arlinx.com>
31301 Date:   Sun Dec 30 01:01:14 2007 -0500
31302
31303     PPC4xx: Remove sdram.h from board/amcc/sequoia
31304
31305     These definitions are now in "include/ppc440.h".
31306
31307     Signed-off-by: Larry Johnson <lrj@acm.org>
31308
31309 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
31310 Author: Larry Johnson <lrj@arlinx.com>
31311 Date:   Sun Dec 30 01:00:50 2007 -0500
31312
31313     PPC4xx: Use common code for Sequoia board SDRAM support
31314
31315     Signed-off-by: Larry Johnson <lrj@acm.org>
31316
31317 commit 8b0c5c127690335758100c25eaec2b84db97c101
31318 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31319 Date:   Thu Dec 27 16:58:41 2007 +0100
31320
31321     net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
31322
31323     When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
31324     networking stack does not automatically switch to
31325     another interface. This patch does not touch the default
31326     behavior.
31327
31328     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31329     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31330
31331 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
31332 Author: Upakul Barkakaty <upakul@gmail.com>
31333 Date:   Thu Nov 29 12:16:13 2007 +0530
31334
31335     NET: Proper return code handling in eth_init() function in file eth.c
31336
31337     This patch modifies the return code handling in the eth_init()
31338     function, to be compatible with the handling of the return codes in
31339     the other network stack files. It now returns a 0 on Success and -1 on
31340     error.
31341
31342     Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
31343     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31344
31345 commit 5ca2d0953e4579a80810966cca2077e20d912c97
31346 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31347 Date:   Mon Nov 19 20:27:04 2007 +0900
31348
31349     net/eth.c: Fix env_enetaddr signed overflow
31350
31351     Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
31352     warned as below:
31353
31354       U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
31355
31356       DRAM:  256 MB
31357       Flash: 32 MB
31358       In:    serial
31359       Out:   serial
31360       Err:   serial
31361       Net:   NEC-Candy
31362       Warning: NEC-Candy MAC addresses don't match:
31363       Address in SROM is         00:00:4C:80:92:A2
31364       Address in environment is  FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
31365
31366     This patch changes env_enetaddr type from `char' to `unsigned char'.
31367
31368     Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
31369     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31370     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31371
31372 commit f85b60710571b37293d2233933b76e2aa3db5635
31373 Author: Rafal Jaworowski <raj@semihalf.com>
31374 Date:   Thu Dec 27 18:19:02 2007 +0100
31375
31376     Introduce new eth_receive routine
31377
31378     The purpose of this routine is receiving a single network frame, outside of
31379     U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
31380     U-Boot will let them utilise networking facilities. For sending a raw frame
31381     the already existing eth_send() can be used.
31382
31383     The direct consumer of this routine is the newly introduced API layer for
31384     external applications (enabled with CONFIG_API).
31385
31386     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
31387     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
31388     Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31389
31390 commit 5c740711f0ea5b51414b341b71597c4a0751be74
31391 Author: Jon Loeliger <jdl@freescale.com>
31392 Date:   Thu Jan 3 10:41:04 2008 -0600
31393
31394     8610: Move include of config.h earlier.
31395
31396     Include config.h earlier in the set of #includes
31397     so as to avoid a incidental and duplicate definition
31398     of CFG_CACHELINE_SIZE.
31399
31400     Signed-off-by: Jon Loeliger
31401
31402 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
31403 Author: Jon Loeliger <jdl@freescale.com>
31404 Date:   Tue Dec 4 10:53:34 2007 -0600
31405
31406     Don't slam #undef DEBUG in the 8641HPCN config file.
31407
31408     Doing so prevents it from being individually set
31409     and useful in other files.
31410
31411     Signed-off-by: Jon Loeliger <jdl@freescale.com>
31412
31413 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
31414 Author: Jon Loeliger <jdl@freescale.com>
31415 Date:   Wed Nov 28 14:47:18 2007 -0600
31416
31417     Convert MPC8641HPCN to use libfdt.
31418
31419     Assumes the presence of the aliases node in the DTS to
31420     locate the ethernet, pci and serial nodes for fixups.
31421
31422     Use consistent fdtaddr and fdtfile in environment variables.
31423
31424     Signed-off-by: Jon Loeliger <jdl@freescale.com>
31425
31426 commit ce37422d0002e10490e268392e0c4e3028e52cec
31427 Author: Stefan Roese <sr@denx.de>
31428 Date:   Wed Jan 2 14:06:26 2008 +0100
31429
31430     cfi_flash: Fix bug in flash_isset() to use correct 32bit function
31431
31432     This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
31433     flash chips connected to a 32bit wide port.
31434
31435     Signed-off-by: Stefan Roese <sr@denx.de>
31436
31437 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
31438 Author: Wolfgang Denk <wd@denx.de>
31439 Date:   Wed Jan 2 15:58:44 2008 +0100
31440
31441     Fix compile problem introduced by "cleanup" commit 3dfd708c
31442
31443     Signed-off-by: Wolfgang Denk <wd@denx.de>
31444
31445 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
31446 Author: Wolfgang Denk <wd@denx.de>
31447 Date:   Wed Jan 2 15:54:45 2008 +0100
31448
31449     Make scripts and Makefiles POSIX compliant
31450
31451     The bash builtin versions of the "test" (resp. "[") command allow
31452     using "==" for string comparisons, but POSIX compatible implemen-
31453     tations (like /usr/bin/test) insist on using "=" only. On such systems
31454     you will see:
31455
31456         $ /usr/bin/test a == a && echo OK
31457         /usr/bin/test: ==: binary operator expected
31458
31459     This patch fixes Makefiles and scripts to use POSIX style.
31460
31461     Signed-off-by: Wolfgang Denk <wd@denx.de>
31462
31463 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
31464 Author: Stefan Roese <sr@denx.de>
31465 Date:   Wed Jan 2 14:05:37 2008 +0100
31466
31467     cfi_flash: Fix bug in flash_isset() to use correct 32bit function
31468
31469     This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
31470     flash chips connected to a 32bit wide port.
31471
31472     Signed-off-by: Stefan Roese <sr@denx.de>
31473
31474 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
31475 Author: Wolfgang Denk <wd@denx.de>
31476 Date:   Wed Jan 2 12:38:43 2008 +0100
31477
31478     Minor coding style cleanup.
31479
31480     Signed-off-by: Wolfgang Denk <wd@denx.de>
31481
31482 commit e174ac34adf5d5653df12bc3cf19c52063a71269
31483 Author: Stefan Roese <sr@denx.de>
31484 Date:   Fri Dec 28 17:29:56 2007 +0100
31485
31486     ppc4xx: Coding style cleanup
31487
31488     Signed-off-by: Stefan Roese <sr@denx.de>
31489
31490 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
31491 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31492 Date:   Fri Dec 28 17:07:24 2007 +0100
31493
31494     ppc4xx: Complete PMC440 board support
31495
31496     This patch brings the PMC440 board configuration file.
31497     Finally it enables the PMC440 board support.
31498
31499     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31500
31501 commit 407843a582560fc5231299561ab3c2b6b6cd3397
31502 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31503 Date:   Fri Dec 28 17:07:18 2007 +0100
31504
31505     ppc4xx: Add FPGA support and BSP commands for PMC440 boards
31506
31507     This patch adds some BSP commands and FPGA booting support
31508     for esd's PMC440 boards.
31509
31510     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31511
31512 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
31513 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31514 Date:   Fri Dec 28 17:07:14 2007 +0100
31515
31516     ppc4xx: Add initial esd PMC440 board files
31517
31518     This patch adds the first files for the new esd PMC440 boards.
31519     The next two patches will complete the PMC440 board support.
31520
31521     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31522
31523 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
31524 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31525 Date:   Fri Dec 28 17:10:36 2007 +0100
31526
31527     ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
31528
31529     - add EEPROM write protection for esd PLU405 boards.
31530     - initialize NAND GPIOs
31531     - use correct io accessors
31532     - cleanup
31533
31534     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31535
31536 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
31537 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31538 Date:   Fri Dec 28 17:10:44 2007 +0100
31539
31540     ppc4xx: use correct io accessors for esd's LCD code
31541
31542     This patch fixes esd's LCD dectection code to work correctly with
31543     newer gcc versions.
31544
31545     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31546
31547 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
31548 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31549 Date:   Fri Dec 28 17:10:42 2007 +0100
31550
31551     ppc4xx: Maintenance patch for VOH405 boards
31552
31553     - add EEPROM write protection
31554     - initialize NAND GPIOs
31555     - use correct io accessors
31556     - slow down I2C clock to 100kHz
31557     - enable ext. I2C bus
31558     - cleanup
31559
31560     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31561
31562 commit c05569066dbcba3fdf36d4d1943df265dc316a86
31563 Author: Stefan Roese <sr@denx.de>
31564 Date:   Fri Dec 28 16:08:08 2007 +0100
31565
31566     ppc4xx: Enable 405EP PCI arbiter per default on all boards
31567
31568     In an attmemt to clean up the 4xx start.S file, I removed the enabling
31569     of the internal 405EP PCI arbiter. This is needed for multiple other
31570     405EP platforms, like most of the esd 405EP. Now the internal PCI
31571     arbiter is enabled again per default as it has been before.
31572
31573     Signed-off-by: Stefan Roese <sr@denx.de>
31574     Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31575
31576 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
31577 Author: Stefan Roese <sr@denx.de>
31578 Date:   Fri Dec 28 15:53:46 2007 +0100
31579
31580     ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
31581
31582     Signed-off-by: Stefan Roese <sr@denx.de>
31583     Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31584
31585 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
31586 Author: Stefan Roese <sr@denx.de>
31587 Date:   Fri Dec 28 06:06:04 2007 +0100
31588
31589     ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
31590
31591     Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
31592     platforms mentioned above.
31593
31594     Signed-off-by: Stefan Roese <sr@denx.de>
31595
31596 commit b568fd25574181a3b12ae3d66b2913903442cb83
31597 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31598 Date:   Thu Dec 27 17:03:46 2007 +0100
31599
31600     Remove CPCI440 board
31601
31602     This board never left prototyping state and it
31603     became a millstone round my neck. So remove it.
31604
31605     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31606
31607 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
31608 Author: Larry Johnson <lrj@arlinx.com>
31609 Date:   Thu Dec 27 11:28:51 2007 -0500
31610
31611     Add support for Korat PPC440EPx board
31612
31613     These patches add support for the PPC440EPx-based "Korat" board to
31614     U-Boot.  They are based primarily on support for the Sequoia board.
31615
31616     Signed-off-by: Larry Johnson <lrj@acm.org>
31617
31618 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
31619 Author: Larry Johnson <lrj@arlinx.com>
31620 Date:   Sat Dec 22 15:16:25 2007 -0500
31621
31622     Add configuration file for Korat board
31623
31624     This patch supplies the configuration file for the Korat PPC440EPx-
31625     processor board.
31626
31627     Signed-off-by: Larry Johnson <lrj@acm.org>
31628
31629 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
31630 Author: Larry Johnson <lrj@arlinx.com>
31631 Date:   Sat Dec 22 15:16:11 2007 -0500
31632
31633     Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
31634
31635     Signed-off-by: Larry Johnson <lrj@acm.org>
31636
31637 commit aba19604d848b2838cfb9ebe818909e6a216058e
31638 Author: Larry Johnson <lrj@arlinx.com>
31639 Date:   Thu Dec 27 10:54:48 2007 -0500
31640
31641     Add 440EPx DDR2 SPD DIMM support
31642
31643     This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
31644     controller.  It should also work on the 440GRx.  It is based on the DDR2
31645     SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
31646
31647     This code has been tested on prototype Korat boards with three Kingston
31648     DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
31649     (two ranks).  The Korat board has a single DIMM socket, but support has
31650     been provided (though not tested) for boards with two DIMM sockets.
31651
31652     Signed-off-by: Larry Johnson <lrj@acm.org>
31653
31654 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
31655 Author: Larry Johnson <lrj@arlinx.com>
31656 Date:   Sat Dec 22 15:15:30 2007 -0500
31657
31658     Copy 440EPx/GRx SDRAM data-eye search to common directory
31659
31660     This patch creates a non-board-specific file for performing the SDRAM
31661     data-eye search.  It also adds ECC error checking to the test of valid
31662     data on readback when ECC is enabled.
31663
31664     Signed-off-by: Larry Johnson <lrj@acm.org>
31665
31666 commit c46f53333b22b1f9098676bea8884fc7db820cf3
31667 Author: Larry Johnson <lrj@arlinx.com>
31668 Date:   Sat Dec 22 15:15:13 2007 -0500
31669
31670     Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
31671
31672     This patch adds the Denali SDRAM controller definitions to "ppc440.h".
31673     It also fixes two typos in the definitions, so the board-specific
31674     "sdram.h" files containing these definitions are also fixed to avoid
31675     compiler warnings.
31676
31677     Signed-off-by: Larry Johnson <lrj@acm.org>
31678
31679 commit c348578bf612d0c56d8d376d23cae16defbd86af
31680 Author: Larry Johnson <lrj@arlinx.com>
31681 Date:   Thu Dec 27 10:50:55 2007 -0500
31682
31683     Add Ethernet 1000BASE-X support for PPC4xx
31684
31685     This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG".  When this symbol
31686     is defined, the PHY will advertise it's capabilities for autonegotiation
31687     based on the capabilities shown in the PHY's status registers, including
31688     1000BASE-X.  When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
31689     advertise hard-coded capabilities, as before.
31690
31691     Signed-off-by: Larry Johnson <lrj@acm.org>
31692
31693 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
31694 Author: Larry Johnson <lrj@arlinx.com>
31695 Date:   Thu Dec 27 09:52:17 2007 -0500
31696
31697     Add driver for National Semiconductor LM73 temperature sensor
31698
31699     This driver is based on the driver for the LM75.
31700
31701     Signed-off-by: Larry Johnson <lrj@acm.org>
31702
31703 commit 12618278688ea9b3d76536960a5ad2e3790fac40
31704 Author: Larry Johnson <lrj@arlinx.com>
31705 Date:   Sat Dec 22 15:14:00 2007 -0500
31706
31707     Add driver for STMicroelectronics M41T60 RTC
31708
31709     This driver is based on the driver for the M41T11.  In the intended
31710     application, the RTC will be powered by a large capacitor, rather than a
31711     battery.  The driver therefore checks to see whether the RTC has lost
31712     power.  The chip's OUT bit is normally reset from its power-up state.  If
31713     the OUT bit is read as set, or if the date and time are not valid, then the
31714     RTC is assumed to have lost power, and its date and time are reset to
31715     1900-01-01 00:00:00.
31716
31717     Support for adjusting the speed of the clock to improve accuracy is
31718     provided through an environment variable.
31719
31720     Signed-off-by: Larry Johnson <lrj@acm.org>
31721
31722 commit d3471173e14b7544bb60339eda8d3d3906694b0a
31723 Author: Larry Johnson <lrj@arlinx.com>
31724 Date:   Sat Dec 22 15:34:39 2007 -0500
31725
31726     Use out_be32() and friends to access memory-mapped registers in sequoia.c
31727
31728     Signed-off-by: Larry Johnson <lrj@acm.org>
31729
31730 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
31731 Author: Larry Johnson <lrj@arlinx.com>
31732 Date:   Sat Dec 22 15:34:20 2007 -0500
31733
31734     Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
31735
31736     Signed-off-by: Larry Johnson <lrj@acm.org>
31737
31738 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
31739 Author: Larry Johnson <lrj@arlinx.com>
31740 Date:   Sat Dec 22 15:23:50 2007 -0500
31741
31742     Cosmetic changes to ECC POST for AMCC Denali core
31743
31744     Signed-off-by: Larry Johnson <lrj@acm.org>
31745
31746 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
31747 Author: Stefan Roese <sr@denx.de>
31748 Date:   Wed Dec 26 20:20:19 2007 +0100
31749
31750     ppc4xx: Fix compilation problem in 405 cache POST test
31751
31752     Signed-off-by: Stefan Roese <sr@denx.de>
31753
31754 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
31755 Author: Stefan Roese <sr@denx.de>
31756 Date:   Sat Dec 22 12:20:09 2007 +0100
31757
31758     ppc4xx: Move virtual address of POST cache test to bigger address
31759
31760     On Sequoia & LWMON5 the virtual address of the POST cache test is now
31761     moved to a bigger address. This enables usage of more memory on those
31762     boards.
31763
31764     Signed-off-by: Stefan Roese <sr@denx.de>
31765
31766 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
31767 Author: Stefan Roese <sr@denx.de>
31768 Date:   Sat Dec 22 12:18:26 2007 +0100
31769
31770     ppc4xx: Fix problem in 44x cache POST routine
31771
31772     As repoted by Larry Johnson, running "diag run cache" caused a crash
31773     in U-Boot. This problem was introduced by a patch that removed the
31774     TLB entry for the cache test after the test has completed. Since this
31775     TLB was only setup once, a 2nd attempt to run this cache test
31776     failed with a crash. Now this TLB entry is created every time the
31777     routine is called.
31778
31779     Signed-off-by: Stefan Roese <sr@denx.de>
31780
31781 commit b0265b576bb8fa9465f99e99c323768b562fadc2
31782 Author: Stefan Roese <sr@denx.de>
31783 Date:   Fri Dec 21 07:51:29 2007 +0100
31784
31785     ppc4xx: Update Makalu fdt support
31786
31787     Signed-off-by: Stefan Roese <sr@denx.de>
31788
31789 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
31790 Author: Stefan Roese <sr@denx.de>
31791 Date:   Wed Dec 19 09:05:40 2007 +0100
31792
31793     ppc4xx: Add fdt support to AMCC Katmai eval board
31794
31795     Signed-off-by: Stefan Roese <sr@denx.de>
31796
31797 commit 328a340392a5df9aaf00792be989df73e750859e
31798 Author: Stefan Roese <sr@denx.de>
31799 Date:   Tue Dec 18 08:44:51 2007 +0100
31800
31801     ppc4xx: fdt: Cleanup setup of cpu node setup
31802
31803     Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
31804     without using the absolute path to the cpu node. This makes it possible
31805     to use this U-Boot version with both versions of cpu-node naming
31806     "cpu@0" and the former "PowerPC,440EPx@0".
31807
31808     Signed-off-by: Stefan Roese <sr@denx.de>
31809
31810 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
31811 Author: Stefan Roese <sr@denx.de>
31812 Date:   Mon Dec 17 17:26:21 2007 +0100
31813
31814     ppc4xx: Fix lwmon5 compilation problem
31815
31816     Now that the 440EPx ECC test is not board specific anymore
31817     remove this Makefile.
31818
31819     Signed-off-by: Stefan Roese <sr@denx.de>
31820
31821 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
31822 Author: Anatolij Gustschin <agustschin@t-online.de>
31823 Date:   Wed Dec 5 17:43:20 2007 +0100
31824
31825     Fix ppc4xx clear_bss() code
31826
31827     ppc4xx clear_bss() fails if BSS segment size is not
31828     divisible by 4 without remainder. This patch provides
31829     fix for this problem.
31830
31831     Signed-off-by: Anatolij Gustschin <agust@denx.de>
31832
31833 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
31834 Author: Niklaus Giger <niklausgiger@gmx.ch>
31835 Date:   Fri Nov 30 18:35:11 2007 +0100
31836
31837     PPC4xx: Minimal changes to add vxWorks support
31838
31839     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
31840
31841 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
31842 Author: Markus Klotzbücher <mk@denx.de>
31843 Date:   Fri Nov 23 13:09:18 2007 +0100
31844
31845     ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
31846
31847     When using dhcp/bootp the "netmask" environment variable is not
31848     set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
31849     desireable, so the following patch adds this this option to the board
31850     config.
31851
31852     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
31853     Signed-off-by: Stefan Roese <sr@denx.de>
31854
31855 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
31856 Author: Larry Johnson <lrj@arlinx.com>
31857 Date:   Sat Oct 27 12:48:15 2007 -0400
31858
31859     Fix/enhance ECC POST for 440EPx/GRx
31860
31861     This patch allows the ECC POST to be used for different boards with the
31862     PPC440 Denali SDRAM controller.  Modifications include skipping the test
31863     if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
31864     to prevent timing errors.
31865
31866     Signed-off-by: Larry Johnson <lrj@acm.org>
31867
31868 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
31869 Author: Larry Johnson <lrj@arlinx.com>
31870 Date:   Sat Oct 27 12:48:05 2007 -0400
31871
31872     PPC4xx: Move/rename ECC POST for 440EPx/GRx
31873
31874     Signed-off-by: Larry Johnson <lrj@acm.org>
31875
31876 commit c29d2d3680046d430022c55e50fcb27f5866517e
31877 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31878 Date:   Fri Dec 14 11:20:33 2007 +0100
31879
31880     ppc4xx: use correct io accessors for 4xx ethernet POST
31881
31882     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31883
31884 commit ba79fde58a48c0a6ff8e2a96caba951594142203
31885 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31886 Date:   Fri Dec 14 11:19:56 2007 +0100
31887
31888     ppc4xx: fix flush + invalidate_dcache_range arguments
31889
31890     flush + invalidate_dcache_range() expect the start and stop+1 address.
31891     So the stop address is the first address behind (!) the range.
31892
31893     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31894
31895 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
31896 Author: Stefan Roese <sr@denx.de>
31897 Date:   Fri Dec 14 08:41:29 2007 +0100
31898
31899     ppc4xx: fdt: use fdt_fixup_ethernet()
31900
31901     By using aliases in the dts file, the ethernet node fixup is
31902     much easier with the recently added functions.
31903
31904     Please note that the dts file needs the aliases for this to work.
31905
31906     Signed-off-by: Stefan Roese <sr@denx.de>
31907
31908 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
31909 Author: Stefan Roese <sr@denx.de>
31910 Date:   Thu Dec 13 14:52:53 2007 +0100
31911
31912     ppc4xx: Bring 4xx fdt support up-to-date
31913
31914     This patch update the 4xx fdt support. It enabled fdt booting
31915     on the AMCC Kilauea and Sequoia for now. More can follow later
31916     quite easily.
31917
31918     Signed-off-by: Stefan Roese <sr@denx.de>
31919
31920 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
31921 Author: Stefan Roese <sr@denx.de>
31922 Date:   Thu Dec 27 07:50:54 2007 +0100
31923
31924     cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
31925
31926     The check for an sufficiently erased destination was missing in the
31927     buffered write function of the cfi flash driver (when
31928     CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
31929     writing to such a region will fail with the currect error message.
31930
31931     Signed-off-by: Stefan Roese <sr@denx.de>
31932
31933 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
31934 Author: Martin Krause <martin.krause@tqs.de>
31935 Date:   Mon Nov 12 10:56:17 2007 +0100
31936
31937     Some configuration updates for the TQM5200 based TB5200 board:
31938
31939     - enable command line history
31940     - increase malloc space (because of bigger flash sectors)
31941
31942     Signed-off-by: Martin Krause <martin.krause@tqs.de>
31943
31944 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
31945 Author: Martin Krause <martin.krause@tqs.de>
31946 Date:   Thu Sep 27 11:10:08 2007 +0200
31947
31948     TQM8xx: use the CFI flash driver on all TQM8xx boards
31949
31950     Signed-off-by: Martin Krause <martin.krause@tqs.de>
31951
31952 commit 11d9eec479b470eab9242ab937fca70a876d9376
31953 Author: Martin Krause <martin.krause@tqs.de>
31954 Date:   Wed Sep 26 17:55:56 2007 +0200
31955
31956     TQM885D: adjust for doubled flash sector size + some minor fixes
31957
31958     Signed-off-by: Martin Krause <martin.krause@tqs.de>
31959
31960 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
31961 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
31962 Date:   Wed Sep 26 17:55:54 2007 +0200
31963
31964     TQM885D: Exchanged SDRAM timing by a more relaxed timing.
31965
31966     CAS-Latency=2, Write Recovery Time tWR=2
31967     The max. supported bus frequency is 66 MHz. Therefore, changed
31968     threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
31969
31970     Signed-off-by: Martin Krause <martin.krause@tqs.de>
31971
31972 commit b988b8cd443989be65161888eea0127ad03f846f
31973 Author: Martin Krause <martin.krause@tqs.de>
31974 Date:   Wed Sep 26 17:55:56 2007 +0200
31975
31976     TQM885D: use calculated cpuclk instead of measuring it
31977
31978     On the TQM885D the measurement of cpuclk with the PIT reference
31979     timer ist not necessary. Since all module variants use the same
31980     external 10 MHz oscillator, the cpuclk only depends on the PLL
31981     configuration - which is readable by software.
31982
31983     Signed-off-by: Martin Krause <martin.krause@tqs.de>
31984
31985 commit 492c7049869348d31168de8dad89651315e468e0
31986 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
31987 Date:   Thu Sep 27 14:54:46 2007 +0200
31988
31989     TQM885D: fix SDRAM refresh
31990
31991     At 133 MHz the current SDRAM refresh rate is too fast
31992     (measured 4 * 1.17 us).
31993     CFG_MAMR_PTA changes from 39 to 128. This result
31994     in a refresh rate of 4 * 7.8 us at the default clock
31995     66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
31996     This is a compromise until a new method is found to
31997     adjust the refresh rate.
31998
31999     Signed-off-by: Martin Krause <martin.krause@tqs.de>
32000
32001 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
32002 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
32003 Date:   Thu Sep 27 14:54:46 2007 +0200
32004
32005     TQM860M: Support for 10col SDRAMs, max. 128 MiB
32006
32007     Signed-off-by: Martin Krause <martin.krause@tqs.de>
32008
32009 commit 61fb15c516fef5631e305f1976d7b3a679725856
32010 Author: Wolfgang Denk <wd@denx.de>
32011 Date:   Thu Dec 27 01:52:50 2007 +0100
32012
32013     Fix coding style issues; update CHANGELOG.
32014
32015     Signed-off-by: Wolfgang Denk <wd@denx.de>
32016
32017 commit 467bcee11fe26ad422f2de971aa70866079870f2
32018 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32019 Date:   Fri Dec 14 15:36:18 2007 +0100
32020
32021     cfi_flash: Add manufacturer-specific fixups
32022
32023     Run fixups based on the JEDEC manufacturer ID independent of the
32024     command set ID.
32025
32026     This changes current behaviour: Previously, geometry reversal for AMD
32027     chips were done based on the command set ID, while they are now done
32028     based on the JEDEC manufacturer and device ID.
32029
32030     Also add fixup for top-boot Atmel chips. A fixup is needed for
32031     AT49BV6416(T) too, but since u-boot currently only reads the low byte
32032     of the device ID, there's no way to tell it apart from AT49BV642D,
32033     which should not have this fixup. Since AT49BV642D support is
32034     necessary to get ATNGW100 board support into mainline, I've commented
32035     out the fixup for now.
32036
32037     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32038
32039 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
32040 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32041 Date:   Fri Dec 14 15:36:17 2007 +0100
32042
32043     cfi_flash: Add cmdset-specific init functions
32044
32045     Move things like reading JEDEC IDs and fixing up geometry reversal
32046     into separate functions. The geometry reversal fixup is now performed
32047     by altering the qry structure directly, which makes the sector init
32048     code slightly cleaner.
32049
32050     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32051
32052 commit e23741f4a6d8047520ef0d4971762749b3587d32
32053 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32054 Date:   Fri Dec 14 15:36:16 2007 +0100
32055
32056     cfi_flash: Read whole QRY structure in one go
32057
32058     Read out the whole CFI Standard Query structure after successful cfi
32059     identification. This allows subsequent code to access this information
32060     directly without having to go through flash_read_uchar() and friends.
32061
32062     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32063
32064 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
32065 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32066 Date:   Mon Dec 17 11:02:44 2007 +0100
32067
32068     AVR32: Fix logic inversion in disable_interrupts()
32069
32070     disable_interrupts() should return nonzero if interrupts were
32071     _enabled_ before, not disabled.
32072
32073     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32074
32075 commit acac475212cbedb17b321a363a1c878e2b47b37f
32076 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32077 Date:   Fri Dec 14 16:51:22 2007 +0100
32078
32079     AVR32: Enable interrupts at bootup
32080
32081     The timer code depends on the timer interrupt to keep track of the
32082     upper 32 bits of the cycle counter. This obviously doesn't work when
32083     interrupts are disabled the whole time.
32084
32085     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32086
32087 commit 9570bcd87f4db255514f43b6701746c412f8fef0
32088 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32089 Date:   Thu Nov 15 10:03:45 2007 +0100
32090
32091     AVR32: Fix wrong pin setup for USART3
32092
32093     As reported by Gerhard Berghofer:
32094
32095     in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
32096     instead of PB18 and PB19.
32097
32098     which is obviously correct. There's currently no code that uses
32099     USART3, but custom boards may run into problems.
32100
32101     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32102
32103 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
32104 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32105 Date:   Thu Nov 1 12:44:20 2007 +0100
32106
32107     README: Remove ATSTK1000 daughterboard list
32108
32109     As noted by Kim Phillips, these lists tend to become out of date.
32110
32111     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32112
32113 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
32114 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32115 Date:   Tue Oct 30 14:56:36 2007 +0100
32116
32117     Add ATSTK100[234] to MAINTAINERS
32118
32119     Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
32120     "mother". Also update the entry for ATSTK1000 to be not only about the
32121     AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
32122
32123     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32124
32125 commit 64ff2357b1727213803591813dbc779c924bf772
32126 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32127 Date:   Mon Oct 29 13:02:54 2007 +0100
32128
32129     AVR32: Add support for the ATSTK1004 board
32130
32131     ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
32132     which is a derivative of AT32AP7000.
32133
32134     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32135
32136 commit 667568db157f374b85abd7e03596ddd1f0b25681
32137 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32138 Date:   Mon Oct 29 13:02:54 2007 +0100
32139
32140     AVR32: Add support for the ATSTK1003 board
32141
32142     ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
32143     which is a derivative of AT32AP7000.
32144
32145     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32146
32147 commit 5fee84a794a51ec830548cda485a770efb018b92
32148 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32149 Date:   Mon Oct 29 13:23:33 2007 +0100
32150
32151     AVR32: Make some AT32AP700x peripherals optional
32152
32153     Add a chip-features file providing definitions of the form
32154
32155     AT32AP700x_CHIP_HAS_<peripheral>
32156
32157     to indicate the availability of the given peripheral on the currently
32158     selected chip.
32159
32160     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32161
32162 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
32163 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32164 Date:   Mon Oct 29 13:09:56 2007 +0100
32165
32166     AVR32: Rename at32ap7000 -> at32ap700x
32167
32168     The SoC-specific code for all the AT32AP700x CPUs is practically
32169     identical; the only difference is that some chips have less features
32170     than others. By doing this rename, we can add support for the AP7000
32171     derivatives simply by making some features conditional.
32172
32173     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32174
32175 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
32176 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32177 Date:   Fri Jun 29 18:22:34 2007 +0200
32178
32179     atmel_mci: Show SR when block read fails
32180
32181     Show controller status as well as card status when an error occurs
32182     during block read.
32183
32184     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32185
32186 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
32187 Author: Stefan Roese <sr@denx.de>
32188 Date:   Thu Dec 13 14:52:53 2007 +0100
32189
32190     ppc4xx: Bring 4xx fdt support up-to-date
32191
32192     This patch update the 4xx fdt support. It enabled fdt booting
32193     on the AMCC Kilauea and Sequoia for now. More can follow later
32194     quite easily.
32195
32196     Signed-off-by: Stefan Roese <sr@denx.de>
32197
32198 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
32199 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32200 Date:   Thu Dec 13 12:56:34 2007 +0100
32201
32202     cfi_flash: Use map_physmem() and unmap_physmem()
32203
32204     Use map_physmem() and unmap_physmem() to convert from physical to
32205     virtual addresses. This gives the arch a chance to provide an uncached
32206     mapping for flash accesses.
32207
32208     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32209
32210 commit 4d7d6936eb29af7cca330937808312aa5f61454d
32211 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32212 Date:   Thu Dec 13 12:56:33 2007 +0100
32213
32214     Introduce map_physmem() and unmap_physmem()
32215
32216     map_physmem() returns a virtual address which can be used to access a
32217     given physical address without involving the cache. unmap_physmem()
32218     should be called when the virtual address returned by map_physmem() is
32219     no longer needed.
32220
32221     This patch adds a stub implementation which simply returns the
32222     physical address cast to a uchar * for all architectures except AVR32,
32223     which converts the physical address to an uncached virtual mapping.
32224     unmap_physmem() is a no-op on all architectures, but if any
32225     architecture needs to do such mappings through the TLB, this is the
32226     hook where those TLB entries can be invalidated.
32227
32228     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32229
32230 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
32231 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32232 Date:   Thu Dec 13 12:56:32 2007 +0100
32233
32234     cfi_flash: Introduce read and write accessors
32235
32236     Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
32237     them to access the flash memory. This makes it clearer when the flash
32238     is actually being accessed; merely dereferencing a volatile pointer
32239     looks just like any other kind of access.
32240
32241     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32242
32243 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
32244 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32245 Date:   Thu Dec 13 12:56:31 2007 +0100
32246
32247     Implement __raw_{read,write}[bwl] on all architectures
32248
32249     This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
32250     m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
32251     from Linux.
32252
32253     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32254
32255 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
32256 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32257 Date:   Sat Oct 6 18:55:36 2007 +0200
32258
32259     cfi_flash: Reorder functions and eliminate extra prototypes
32260
32261     Reorder the functions in cfi_flash.c so that each function only uses
32262     functions that have been defined before it. This allows the static
32263     prototype declarations near the top to be eliminated and might allow
32264     gcc to do a better job inlining functions.
32265
32266     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32267
32268 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
32269 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32270 Date:   Thu Dec 13 12:56:29 2007 +0100
32271
32272     cfi_flash: Make some needlessly global functions static
32273
32274     Make functions not declared in any header file static.
32275
32276     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32277
32278 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
32279 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32280 Date:   Thu Dec 13 12:56:28 2007 +0100
32281
32282     cfi_flash: Break long lines
32283
32284     This patch tries to keep all lines in the cfi_flash driver below 80
32285     columns. There are a few lines left which don't fit this requirement
32286     because I couldn't find any trivial way to break them (i.e. it would
32287     take some restructuring, which I intend to do in a later patch.)
32288
32289     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32290
32291 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
32292 Author: Bartlomiej Sieka <tur@semihalf.com>
32293 Date:   Tue Dec 11 13:59:57 2007 +0100
32294
32295     CFI: synchronize command offsets with Linux CFI driver
32296
32297     Fixes non-working CFI Flash on the Inka4x0 board.
32298
32299     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
32300
32301 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
32302 Author: Kumar Gala <galak@kernel.crashing.org>
32303 Date:   Fri Dec 7 12:17:34 2007 -0600
32304
32305     Handle MPC85xx PCIe reset errata (PCI-Ex 38)
32306
32307     On the MPC85xx boards that have PCIe enable the PCIe errata fix.
32308     (MPC8544DS, MPC8548CDS, MPC8568MDS).
32309
32310     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32311
32312 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
32313 Author: Kumar Gala <galak@kernel.crashing.org>
32314 Date:   Fri Dec 7 12:04:30 2007 -0600
32315
32316     Update Freescale MPC85xx ADS/CDS/MDS board config
32317
32318     * Enabled CONFIG_CMD_ELF
32319
32320     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32321
32322 commit d435793229ce29a42797c1edc39f5b34f987f91a
32323 Author: Kumar Gala <galak@kernel.crashing.org>
32324 Date:   Fri Dec 7 04:59:26 2007 -0600
32325
32326     Handle Asynchronous DDR clock on 85xx
32327
32328     The MPC8572 introduces the concept of an asynchronous DDR clock with
32329     regards to the platform clock.
32330
32331     Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
32332     mode.
32333
32334     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32335
32336 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
32337 Author: Kumar Gala <galak@kernel.crashing.org>
32338 Date:   Thu Nov 29 10:34:28 2007 -0600
32339
32340     Update Freescale MPC85xx ADS/CDS/MDS board config
32341
32342     * Removed some misc environment setup
32343     * Enabled CONFIG_CMDLINE_EDITING
32344
32345     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32346
32347 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
32348 Author: Kumar Gala <galak@kernel.crashing.org>
32349 Date:   Thu Nov 29 10:47:44 2007 -0600
32350
32351     Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
32352
32353     Minor path corrections needed to ensure buildability.
32354
32355     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32356
32357 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
32358 Author: Kumar Gala <galak@kernel.crashing.org>
32359 Date:   Thu Nov 29 10:16:18 2007 -0600
32360
32361     Move the MPC8540 ADS board under board/freescale.
32362
32363     Minor path corrections needed to ensure buildability.
32364
32365     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32366
32367 commit 870ceac5b3a3486c109396e005af81ae762b5710
32368 Author: Kumar Gala <galak@kernel.crashing.org>
32369 Date:   Thu Nov 29 10:14:50 2007 -0600
32370
32371     Move the MPC8560 ADS board under board/freescale.
32372
32373     Minor path corrections needed to ensure buildability.
32374
32375     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32376
32377 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
32378 Author: Kumar Gala <galak@kernel.crashing.org>
32379 Date:   Thu Nov 29 10:13:47 2007 -0600
32380
32381     Move the MPC8568 MDS board under board/freescale.
32382
32383     Minor path corrections needed to ensure buildability.
32384
32385     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32386
32387 commit a853d56c59b33415304531443633808736acfc6e
32388 Author: Kumar Gala <galak@kernel.crashing.org>
32389 Date:   Thu Nov 29 02:18:59 2007 -0600
32390
32391     Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
32392
32393     We already had defines for LAWAR_TRGT_IF_* that we should use
32394     rather than creating new ones.  Also, added some missing defines for
32395     PCIE targets.
32396
32397     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32398
32399 commit 04db400892da37b76a585e332a0c137954ad2015
32400 Author: Kumar Gala <galak@kernel.crashing.org>
32401 Date:   Thu Nov 29 02:10:09 2007 -0600
32402
32403     Stop using immap_t on 85xx
32404
32405     In the future the offsets to various blocks may not be in same location.
32406     Move to using CFG_MPC85xx_*_ADDR as the base of the registers
32407     instead of getting it via &immap.
32408
32409     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32410
32411 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
32412 Author: Kumar Gala <galak@kernel.crashing.org>
32413 Date:   Thu Nov 29 01:23:09 2007 -0600
32414
32415     Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
32416
32417     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32418
32419 commit c480861bf000156e6a3e932c258db59ff2212dd3
32420 Author: Kumar Gala <galak@kernel.crashing.org>
32421 Date:   Thu Nov 29 01:06:19 2007 -0600
32422
32423     Update MPC8568 MDS to use libfdt
32424
32425     Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
32426     ethernet, pci, and serial for the various fixups that are done.
32427
32428     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32429
32430 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
32431 Author: Haiying Wang <Haiying.Wang@freescale.com>
32432 Date:   Wed Nov 14 15:52:06 2007 -0500
32433
32434     Add PCI Express support on MPC8568MDS
32435
32436     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
32437     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32438
32439 commit b90d25497625b90ffa3f2911a0895ca237556ff5
32440 Author: Kumar Gala <galak@kernel.crashing.org>
32441 Date:   Thu Nov 29 00:11:44 2007 -0600
32442
32443     Update MPC85xx CDS to use libfdt
32444
32445     Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
32446     ethernet, pci, and serial for the various fixups that are done.
32447
32448     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32449
32450 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
32451 Author: Kumar Gala <galak@kernel.crashing.org>
32452 Date:   Wed Nov 28 22:54:27 2007 -0600
32453
32454     Update MPC8540 ADS to use libfdt
32455
32456     Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
32457     ethernet, pci, and serial for the various fixups that are done.
32458
32459     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32460
32461 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
32462 Author: Kumar Gala <galak@kernel.crashing.org>
32463 Date:   Wed Nov 28 22:40:31 2007 -0600
32464
32465     Update MPC8560 ADS to use libfdt
32466
32467     Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
32468     ethernet, pci, and serial for the various fixups that are done.
32469
32470     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32471
32472 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
32473 Author: Kumar Gala <galak@kernel.crashing.org>
32474 Date:   Wed Nov 28 00:36:33 2007 -0600
32475
32476     Stop using immap_t for cpm offset on 85xx
32477
32478     In the future the offsets to various blocks may not be in same location.
32479     Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
32480     instead of getting it via &immap->im_cpm.
32481
32482     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32483
32484 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
32485 Author: Kumar Gala <galak@kernel.crashing.org>
32486 Date:   Tue Nov 27 23:25:02 2007 -0600
32487
32488     Stop using immap_t for guts offset on 85xx
32489
32490     In the future the offsets to various blocks may not be in same location.
32491     Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
32492     instead of getting it via &immap->im_gur.
32493
32494     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32495
32496 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
32497 Author: Kumar Gala <galak@kernel.crashing.org>
32498 Date:   Tue Nov 27 22:42:34 2007 -0600
32499
32500     Update MPC8544 DS config
32501
32502     * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
32503     * Removed some misc environment setup
32504     * Moved to using fdtfile & fdtaddr as fdt env var names
32505     * Enabled CONFIG_CMDLINE_EDITING
32506
32507     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32508
32509 commit addce57e2e4c49e77ffb2020a84690713bb18b47
32510 Author: Kumar Gala <galak@kernel.crashing.org>
32511 Date:   Mon Nov 26 17:12:24 2007 -0600
32512
32513     Update MPC8544DS to use libfdt
32514
32515     Updated the MPC8544DS config to use libfdt and assume use of aliases for
32516     ethernet, pci, and serial for the various fixups that are done.
32517
32518     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32519
32520 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
32521 Author: Kumar Gala <galak@kernel.crashing.org>
32522 Date:   Thu Nov 29 00:15:30 2007 -0600
32523
32524     Add libfdt based ft_cpu_setup for mpc85xx
32525
32526     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32527
32528 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
32529 Author: Stefan Roese <sr@denx.de>
32530 Date:   Tue Dec 11 13:38:19 2007 +0100
32531
32532     ppc4xx: Correct GPIO offset in gpio_config()
32533
32534     Thanks to Gary Jennejohn for pointing this out.
32535
32536     Signed-off-by: Stefan Roese <sr@denx.de>
32537
32538 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
32539 Author: Stefan Roese <sr@denx.de>
32540 Date:   Tue Dec 11 11:46:01 2007 +0100
32541
32542     rtc: Fix merging problem
32543
32544     Signed-off-by: Stefan Roese <sr@denx.de>
32545
32546 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
32547 Author: Stefan Roese <sr@denx.de>
32548 Date:   Sat Dec 8 14:47:34 2007 +0100
32549
32550     ppc4xx: 405EX: Correctly enable USB pins
32551
32552     This patch selects the USB data pins in the 405EX GPIO and MFC (multi
32553     function control) registers. This is done for the AMCC Kilauea and
32554     Makalu eval boards.
32555
32556     Signed-off-by: Stefan Roese <sr@denx.de>
32557
32558 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
32559 Author: Stefan Roese <sr@denx.de>
32560 Date:   Sat Dec 8 08:25:09 2007 +0100
32561
32562     CFI: Coding style cleanup
32563
32564     Signed-off-by: Stefan Roese <sr@denx.de>
32565
32566 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
32567 Author: Michael Schwingen <michael@schwingen.org>
32568 Date:   Fri Dec 7 23:35:02 2007 +0100
32569
32570     CFI: support JEDEC flash roms in CFI-flash framework
32571
32572     The following patch adds support for non-CFI flash ROMS, by hooking into the
32573     CFI flash code and using most of its code, as recently discussed here in the
32574     thread "Mixing CFI and non-CFI flashs".
32575
32576     Signed-off-by: Michael Schwingen <michael@schwingen.org>
32577     Signed-off-by: Stefan Roese <sr@denx.de>
32578
32579 commit c01b17dd856fa120b2970f50d9598546a4927ec3
32580 Author: Gerald Van Baren <vanbaren@cideas.com>
32581 Date:   Wed Nov 28 21:24:50 2007 -0500
32582
32583     Conditionally compile fdt_fixup_ethernet()
32584
32585     Fix compiler warnings: On boards that don't have ethernets defined,
32586     don't compile fdt_fixup_ethernet().
32587
32588 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
32589 Author: Kumar Gala <galak@kernel.crashing.org>
32590 Date:   Tue Nov 27 21:59:46 2007 -0600
32591
32592     Convert boards that set memory node to use fdt_fixup_memory()
32593
32594     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32595
32596 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
32597 Author: Kumar Gala <galak@kernel.crashing.org>
32598 Date:   Mon Nov 26 17:06:15 2007 -0600
32599
32600     Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
32601
32602     We use a combination of the serialN alias and CONFIG_CONS_INDEX to
32603     determine which serial alias we should set linux,stdout-path to.
32604
32605     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32606
32607 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
32608 Author: Kumar Gala <galak@kernel.crashing.org>
32609 Date:   Mon Nov 26 14:57:45 2007 -0600
32610
32611     Add common memory fixup function
32612
32613     Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
32614
32615     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32616
32617 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
32618 Author: Kumar Gala <galak@kernel.crashing.org>
32619 Date:   Mon Nov 26 11:19:12 2007 -0600
32620
32621     Conditionally compile fdt_support.c
32622
32623     Modify common/Makefile to conditionally compile fdt_support.c based
32624     on CONFIG_OF_LIBFDT.
32625
32626     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32627
32628 commit d88e7ba0980773479e1a64badb293116071b7ef0
32629 Author: Kumar Gala <galak@kernel.crashing.org>
32630 Date:   Mon Nov 26 10:41:40 2007 -0600
32631
32632     Fix build breakage due to libfdt import
32633
32634     The IDS8247 got lost in the update and need an API update
32635     do to rename of functions in libfdt.
32636
32637     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32638
32639 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
32640 Author: Gerald Van Baren <vanbaren@cideas.com>
32641 Date:   Fri Nov 23 19:43:20 2007 -0500
32642
32643     Add spaces around the = in the fdt print format.
32644
32645     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
32646
32647 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
32648 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32649 Date:   Fri Dec 7 01:25:38 2007 +0900
32650
32651     sh: Moved driver of the SuperH dependence
32652
32653     The composition of the directory in the drivers/ changed.
32654     I moved SuperH serial driver and marubun PCMCIA driver.
32655
32656     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32657
32658 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
32659 Author: Wolfgang Denk <wd@denx.de>
32660 Date:   Thu Dec 6 10:21:19 2007 +0100
32661
32662     Release v1.3.1
32663
32664     Signed-off-by: Wolfgang Denk <wd@denx.de>
32665
32666 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
32667 Author: Wolfgang Denk <wd@denx.de>
32668 Date:   Thu Dec 6 10:21:03 2007 +0100
32669
32670     ADS5121 Board: fix compile problem.
32671
32672     Signed-off-by: Wolfgang Denk <wd@denx.de>
32673
32674 commit a27044b14a9e93678a82d7b35f202b93e7687abc
32675 Author: Stefan Roese <sr@denx.de>
32676 Date:   Thu Dec 6 05:58:43 2007 +0100
32677
32678     ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
32679
32680     This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
32681     setting the FIXD bit in the SDR0_MFR register. Here a description of the
32682     symptoms:
32683
32684     Problem Description
32685     ------------------------------
32686     If a DMA is performed between memory and PCI with the DMA 1 Controller
32687     using prefetch, and as a result uses a special purpose buffer selected by
32688     the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
32689     the first part of the transfer sequence is performed twice. The
32690     PPC440SPe PCI Controller requests more data than was needed such that in
32691     the case of enforce memory protection, a host CPU  exception can occur.
32692     No data is corrupted, because data transfer is stopped in the PCI
32693     Controller. Prefetch enable is specified by setting DMA Configuration
32694     Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
32695
32696     Behavior that may be observed in a running system
32697     ---------------------------------------------------------------------------
32698
32699     1. DMA performance is decreased because of the double access on the PCI bus
32700     interface.
32701     2. If an illegal access to some address on the PCI bus is detected at the
32702     system level, a machine check or similar system error may occur.
32703
32704     Workarounds Available
32705     ----------------------------------
32706
32707     1. Do not program prefetch. Note that a prefetch command cannot be programmed
32708     without selecting a special purpose buffer.
32709     2. To avoid crossing a physical boundary of the PCI slave device, add 512
32710     bytes of address to the PCI address range.
32711
32712     This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
32713     from AMCC and slighly changed.
32714
32715     Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
32716     Signed-off-by: Stefan Roese <sr@denx.de>
32717
32718 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
32719 Author: Stefan Roese <sr@denx.de>
32720 Date:   Tue Dec 4 16:29:48 2007 +0100
32721
32722     ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
32723
32724     Signed-off-by: Stefan Roese <sr@denx.de>
32725
32726 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
32727 Author: Wolfgang Denk <wd@denx.de>
32728 Date:   Mon Dec 3 00:15:28 2007 +0100
32729
32730     Prepare for 1.3.1-rc1
32731
32732     Signed-off-by: Wolfgang Denk <wd@denx.de>
32733
32734 commit e15e33433e7c05111968dc9b434a52fd42cbd221
32735 Author: Stefan Roese <sr@denx.de>
32736 Date:   Fri Nov 30 07:15:41 2007 +0100
32737
32738     ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
32739
32740     This manual PCIe reset triggering solves the problem seen with the
32741     Intel EPRO/1000 card, which was not detected (link not established)
32742     upon power-up reset.
32743
32744     Signed-off-by: Stefan Roese <sr@denx.de>
32745
32746 commit 260eea5676ca46903a335686cc020b29c4ca46fe
32747 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32748 Date:   Thu Nov 29 01:21:54 2007 +0900
32749
32750     sh: Add SuperH boards maintainer to MAINTAINERS file
32751
32752     Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
32753
32754     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32755
32756 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
32757 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32758 Date:   Thu Nov 29 00:13:04 2007 +0900
32759
32760     sh: Add ms7750se support in MAKEALL
32761
32762     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32763
32764 commit c7144373427a178332bf9754131c8c34c52c200a
32765 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32766 Date:   Tue Nov 27 09:44:53 2007 +0100
32767
32768     sh: Add sh3 and sh4 support in MAKEALL
32769
32770     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32771     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32772
32773 commit 130080874a3d28450098481a262c5f7c855e908d
32774 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32775 Date:   Sun Nov 25 02:51:17 2007 +0900
32776
32777     sh: Add document for SuperH.
32778
32779     This document is a summary of information concerning SuperH of U-Boot.
32780
32781     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32782
32783 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
32784 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32785 Date:   Sun Nov 25 02:39:31 2007 +0900
32786
32787     sh: Add marubun's pcmcia driver
32788
32789     Marubun pcmcia is a chip for PCMCIA used with SuperH.
32790     Of course, this can be used even by other architectures.
32791     When use this driver, came to be able to use CompactFlash
32792     and Ethernet.
32793
32794     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32795
32796 commit febd86b969b975289ed948f1ac0eb9722da41ced
32797 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32798 Date:   Sun Nov 25 02:32:13 2007 +0900
32799
32800     sh: Update SuperH SCIF driver
32801
32802     - Changed volatile unsigned to vu_.
32803     - Changed Makefile for kconfig.
32804
32805     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
32806
32807 commit 8be760903645af09871be50ad0a6f9ebb62b311d
32808 Author: Stefan Roese <sr@denx.de>
32809 Date:   Tue Nov 27 11:57:35 2007 +0100
32810
32811     ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
32812
32813     After an error in the AMCC 405EX users manual now correctly configure
32814     IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
32815     usage.
32816
32817     Signed-off-by: Stefan Roese <sr@denx.de>
32818
32819 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
32820 Author: Wolfgang Denk <wd@denx.de>
32821 Date:   Mon Nov 26 19:18:21 2007 +0100
32822
32823     Cleanup coding style; update CHANGELOG
32824
32825     Signed-off-by: Wolfgang Denk <wd@denx.de>
32826
32827 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
32828 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32829 Date:   Sun Nov 25 22:39:25 2007 +0100
32830
32831     MAKEALL: add missing 512x boards in ppc
32832
32833     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32834
32835 commit a340c325e668ca7386c2276387681720be9c3757
32836 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32837 Date:   Sun Nov 25 18:45:47 2007 +0100
32838
32839     Makefile : fix tags ctags etags with new drivers organization
32840
32841     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32842
32843 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
32844 Author: Stefan Roese <sr@denx.de>
32845 Date:   Mon Nov 26 15:06:14 2007 +0100
32846
32847     ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
32848
32849     As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
32850     operation.
32851
32852     Signed-off-by: Stefan Roese <sr@denx.de>
32853
32854 commit ca1ce226287270bb01e25b8e3674c701f12edf19
32855 Author: Stefan Roese <sr@denx.de>
32856 Date:   Mon Nov 26 15:01:45 2007 +0100
32857
32858     ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
32859
32860     Signed-off-by: Stefan Roese <sr@denx.de>
32861
32862 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
32863 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32864 Date:   Sun Nov 25 18:45:47 2007 +0100
32865
32866     Makefile : fix tags ctags etags with new drivers organization
32867
32868     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32869
32870 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
32871 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32872 Date:   Sat Nov 24 21:26:56 2007 +0100
32873
32874     drivers/mtd : move mtd drivers to drivers/mtd
32875
32876     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32877
32878 commit 318c0b90431f2648552e5ade78833f42652ce859
32879 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32880 Date:   Sat Nov 24 21:17:55 2007 +0100
32881
32882     drivers/misc : move misc drivers to drivers/misc
32883
32884     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32885
32886 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
32887 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32888 Date:   Sat Nov 24 21:13:59 2007 +0100
32889
32890     drivers/block : move block drivers to drivers/block
32891
32892     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32893
32894 commit 0c698dcaa70275eb8814f665b545547cee013892
32895 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32896 Date:   Sat Nov 24 20:59:50 2007 +0100
32897
32898     drivers/rtc : move rtc drivers to drivers/rtc
32899
32900     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32901
32902 commit f868cc5a50757d94f36c312395481cb0f187d9e6
32903 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32904 Date:   Sat Nov 24 20:14:44 2007 +0100
32905
32906     drivers/hwmon : move hardware monitor drviers to drivers/hwmon
32907
32908     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32909
32910 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
32911 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32912 Date:   Sat Nov 24 19:46:45 2007 +0100
32913
32914     drivers/input : move input drivers to drivers/input
32915
32916     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32917
32918 commit e4558666293364fc3af1c1d9381ca933fa0f1275
32919 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32920 Date:   Sat Nov 24 19:40:11 2007 +0100
32921
32922     drivers/usb : move usb drivers to drivers/usb
32923
32924     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32925
32926 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
32927 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32928 Date:   Sat Nov 24 19:33:38 2007 +0100
32929
32930     drivers/serial : move serial drivers to drivers/serial
32931
32932     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32933
32934 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
32935 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32936 Date:   Wed Nov 21 21:19:24 2007 +0100
32937
32938     drivers/net : move net drivers to drivers/net
32939
32940     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32941
32942 commit 352d259130b349fe9593b8dada641bd78a9659e5
32943 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32944 Date:   Tue Nov 20 20:41:48 2007 +0100
32945
32946     drivers/video : move video drivers to drivers/video
32947
32948     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32949
32950 commit 73646217186aa17afc8e305c5f06f06dd335eaad
32951 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32952 Date:   Tue Nov 20 20:33:09 2007 +0100
32953
32954     drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
32955
32956     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32957
32958 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
32959 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32960 Date:   Tue Nov 20 20:28:09 2007 +0100
32961
32962     drivers/pci : move pci drivers to drivers/pci
32963
32964     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32965
32966 commit 9162352817579840d7802da6d85872b3ca003c97
32967 Author: Gerald Van Baren <vanbaren@cideas.com>
32968 Date:   Thu Nov 22 17:23:23 2007 -0500
32969
32970     Fix fdt printing for updated libfdt
32971
32972     Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
32973
32974     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
32975
32976 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
32977 Author: Kumar Gala <galak@kernel.crashing.org>
32978 Date:   Wed Nov 21 13:30:15 2007 -0600
32979
32980     Add additional fdt fixup helper functions
32981
32982     Added the following fdt fixup helpers:
32983      * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
32984      * do_fixup_by_compat{_u32} - Find matching nodes by compat
32985
32986     The _u32 variants work the same only the property they are setting
32987     is know to be a 32-bit integer instead of a byte buffer.
32988
32989     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32990
32991 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
32992 Author: Kumar Gala <galak@kernel.crashing.org>
32993 Date:   Wed Nov 21 11:11:03 2007 -0600
32994
32995     Add fdt_fixup_ethernet helper to set mac addresses
32996
32997     Added a fixup helper that uses aliases to set mac addresses
32998     in the device tree based on the bd_t
32999
33000     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33001
33002 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
33003 Author: Kumar Gala <galak@kernel.crashing.org>
33004 Date:   Wed Nov 21 14:07:46 2007 -0600
33005
33006     Fix warnings from import of libfdt
33007
33008     cmd_fdt.c: In function fdt_print:
33009     cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
33010     cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
33011     cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
33012     cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
33013
33014     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33015
33016 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
33017 Author: Kumar Gala <galak@kernel.crashing.org>
33018 Date:   Wed Oct 24 11:04:22 2007 -0500
33019
33020     Update libfdt from device tree compiler (dtc)
33021
33022     Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
33023     the device tree compiler (dtc) project.
33024
33025     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33026
33027 commit e93becf80d732b64aef81b23e8b6ece02c40533d
33028 Author: Kumar Gala <galak@kernel.crashing.org>
33029 Date:   Sat Nov 3 19:46:28 2007 -0500
33030
33031     Move do_fixup* for libfdt into common code
33032
33033     Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
33034     into common/fdt_support.c and renamed:
33035
33036     do_fixup()  -> do_fixup_by_path()
33037     do_fixup_u32()      -> do_fixup_by_path_u32()
33038
33039     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33040
33041 commit f738b4a75998f42a7408defadc9baac7a31c92db
33042 Author: Kumar Gala <galak@kernel.crashing.org>
33043 Date:   Thu Oct 25 16:15:07 2007 -0500
33044
33045     Make no options to fdt print default to '/'
33046
33047     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33048
33049 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
33050 Author: Kumar Gala <galak@kernel.crashing.org>
33051 Date:   Wed Oct 24 10:21:57 2007 -0500
33052
33053     Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
33054
33055     Removed:
33056         fdt_node_is_compatible
33057         fdt_find_node_by_type
33058         fdt_find_compatible_node
33059
33060     To ease merge of newer libfdt as we aren't using them anywhere at this time.
33061
33062     Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
33063     reason.
33064
33065     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33066
33067 commit 98e2867cc85409b919f862e6c16026461ec955df
33068 Author: Grant Likely <grant.likely@secretlab.ca>
33069 Date:   Wed Nov 21 09:19:37 2007 -0700
33070
33071     [BUILD] Remove libraries when updating autoconf.mk
33072
33073     Fix library problems caused by conditional compilation.  Using
33074     autoconf.mk to decide which files to compile has caused a problem when
33075     changing configuration from one board to another without clearing out
33076     the library (*.a) files.
33077
33078     It used to be that the linker was always passed the same list of .o
33079     files when building the .a files.  However, that is not longer true
33080     with conditional compilation.  Now, a different board config will have
33081     a different file list passed to the linker.  The problem occurs when
33082     a library has already been built and the board config is changed.
33083
33084     Since the linker will update instead of replace a preexisting library,
33085     then if the file list changes to remove some object files the old
33086     objects will still exist in the library.
33087
33088     The solution is to remove all old library files when autoconf.mk is
33089     made.
33090
33091     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33092
33093 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
33094 Author: Kumar Gala <galak@kernel.crashing.org>
33095 Date:   Wed Nov 21 08:49:50 2007 -0600
33096
33097     [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
33098
33099     Modify libfdt/Makefile to conditionally compile the *.c files based
33100     on the board config.
33101
33102     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33103
33104 commit 4a43719a7738712811d822ca8125427b27a55cdc
33105 Author: Grant Likely <grant.likely@secretlab.ca>
33106 Date:   Mon Sep 24 09:05:31 2007 -0600
33107
33108     [BUILD] conditionally compile common/cmd_*.c in common/Makefile
33109
33110     Modify common/Makefile to conditionally compile the cmd_*.c files based
33111     on the board config.
33112
33113     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33114
33115 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
33116 Author: Grant Likely <grant.likely@secretlab.ca>
33117 Date:   Mon Sep 24 09:05:31 2007 -0600
33118
33119     [BUILD] Generate include/autoconf.mk from board config files
33120
33121     Use cpp and sed to postprocess config.h and import the defined values
33122     into include/autoconf.mk.  autoconf.mk is then included by config.mk to
33123     give 'make' access to the board configuration.
33124
33125     Doing this enables conditional compilation at the Makefile level instead
33126     of by wrapping every .c file with #ifdef/#endif wrappers.
33127
33128     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33129
33130 commit 68b88999da87ab88e71e1306192905be3450198e
33131 Author: Jon Loeliger <jdl@freescale.com>
33132 Date:   Tue Nov 20 15:02:26 2007 -0600
33133
33134     8610HPCD: Enable the 8610 Display Interface Unit
33135
33136     Signed-off-by: Jon Loeliger <jdl@freescale.com>
33137
33138 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
33139 Author: Jon Loeliger <jdl@freescale.com>
33140 Date:   Tue Nov 20 15:00:53 2007 -0600
33141
33142     Move 8610 DIU interface structure definitions to header file.
33143
33144     These two structures are still needed during the
33145     initialization and setup of the DIU hardware.
33146     So move them to the fsl_diu_fb.h file for now.
33147     Official "blah".
33148
33149     Noticed-by: York Sun <yorksun@freescale.com>
33150     Signed-off-by: Jon Loeliger <jdl@freescale.com>
33151
33152 commit 080c646dbf474a109c3f85718fb01ce042a38c45
33153 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33154 Date:   Tue Nov 20 20:14:18 2007 +0100
33155
33156     drivers/i2c : move i2c drivers to drivers/i2c
33157
33158     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33159
33160 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
33161 Author: Wolfgang Denk <wd@denx.de>
33162 Date:   Mon Nov 19 22:20:24 2007 +0100
33163
33164     Prepare for 1.3.0 release.
33165
33166     Signed-off-by: Wolfgang Denk <wd@denx.de>
33167
33168 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
33169 Author: Haiying Wang <Haiying.Wang@freescale.com>
33170 Date:   Mon Nov 19 10:02:13 2007 -0500
33171
33172     Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
33173
33174     CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
33175
33176     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
33177
33178 commit f8c320609366176b31104d9bf5e295232e1c7f1d
33179 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
33180 Date:   Mon Nov 19 11:14:16 2007 +0900
33181
33182     [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
33183
33184     lowlevel_init.S: Assembler messages:
33185     lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
33186
33187     Looking at codes, the `memtest' and `clearmem' are intentional mixed
33188     use of `global symbols' and `label' for debugging purpose. To make it
33189     build, just disable global-symbols-use for now. As a result `memtest'
33190     still remains as unused, but leave it be...
33191
33192     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
33193
33194 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
33195 Author: Wolfgang Denk <wd@denx.de>
33196 Date:   Mon Nov 19 12:59:14 2007 +0100
33197
33198     Fix build problems with mp2usb board
33199
33200     Signed-off-by: Wolfgang Denk <wd@denx.de>
33201
33202 commit 6bf4c686afca1e86e1c384d59218f914605713bf
33203 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33204 Date:   Sun Nov 18 18:36:11 2007 +0100
33205
33206     s3c24x0: Fix usb_ohci.c missing in Makefile
33207     and usb_ohci.c warning differ in signedness
33208
33209     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33210
33211 commit 6073f61e078da5ddb521b56256bcc36508589883
33212 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33213 Date:   Sun Nov 18 12:55:02 2007 +0100
33214
33215     pb1x00 board: Fix u16 status declaration when PCMCIA is defined
33216
33217     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33218
33219 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
33220 Author: Wolfgang Denk <wd@denx.de>
33221 Date:   Sun Nov 18 17:11:09 2007 +0100
33222
33223     Fix compiler warnings for ARM systems.
33224
33225     Signed-off-by: Wolfgang Denk <wd@denx.de>
33226
33227 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
33228 Author: Wolfgang Denk <wd@denx.de>
33229 Date:   Sun Nov 18 16:36:27 2007 +0100
33230
33231     Fix compiler warnings for PPC systems. Update CHANGELOG.
33232
33233     Signed-off-by: Wolfgang Denk <wd@denx.de>
33234
33235 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
33236 Author: Stefan Roese <sr@denx.de>
33237 Date:   Sun Nov 18 14:44:44 2007 +0100
33238
33239     ppc4xx: Correct 405EX PCIe UTL register mapping
33240
33241     Map 4k mem space for UTL registers for each port.
33242
33243     Signed-off-by: Stefan Roese <sr@denx.de>
33244
33245 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
33246 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33247 Date:   Sat Nov 17 11:31:10 2007 +0100
33248
33249     Fix warning differ in signedness in net/net.c and net/nfs.c
33250
33251 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
33252 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33253 Date:   Sat Nov 17 20:42:45 2007 +0900
33254
33255     gth2.c: Fix a warning on gth2 build.
33256
33257     gth2.c: In function 'misc_init_r':
33258     gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
33259
33260     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33261
33262 commit 2309c130aa4c84b91bd874a41269c923eb61b555
33263 Author: Stefan Roese <sr@denx.de>
33264 Date:   Sat Nov 17 07:58:25 2007 +0100
33265
33266     Fix warning differ in signedness in common/cmd_scsi.c
33267
33268     Signed-off-by: Stefan Roese <sr@denx.de>
33269
33270 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
33271 Author: Stefan Roese <sr@denx.de>
33272 Date:   Sat Nov 17 14:52:29 2007 +0100
33273
33274     ppc4xx: Update AMCC Kilauea config file
33275
33276     - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
33277
33278     Signed-off-by: Stefan Roese <sr@denx.de>
33279
33280 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
33281 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33282 Date:   Sat Nov 17 20:05:26 2007 +0900
33283
33284     [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
33285
33286     Current trick to pick up GNU assembler minor version does not work with the
33287     latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
33288     "(GNU Binutils) ".
33289
33290       $ sde-as --version |grep "GNU assembler"
33291       GNU assembler 2.15.94 mipssde-6.02.02-20050602
33292       $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
33293       2.15.94
33294       $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
33295       15
33296       $
33297
33298       $ mips-linux-as --version |grep "GNU assembler"
33299       GNU assembler (GNU Binutils) 2.18
33300       $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
33301       (GNU
33302       $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
33303       (no output)
33304       $
33305
33306     As a result of above, you'll see many noises with such binutils:
33307
33308       make -C cpu/mips/
33309       /bin/sh: line 0: [: : integer expression expected
33310       /bin/sh: line 0: [: : integer expression expected
33311       make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
33312       mips-linux-gcc  -D__ASSEMBLY__ -g  -Os   -D__KERNEL__ -DTEXT_BASE=0xB0000000  -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
33313       /bin/sh: line 0: [: : integer expression expected
33314       mips-linux-gcc  -D__ASSEMBLY__ -g  -Os   -D__KERNEL__ -DTEXT_BASE=0xB0000000  -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
33315       /bin/sh: line 0: [: : integer expression expected
33316       mips-linux-gcc -g  -Os   -D__KERNEL__ -DTEXT_BASE=0xB0000000  -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
33317       /bin/sh: line 0: [: : integer expression expected
33318
33319     This patch simplifies the trick and makes it work with both versions of gas.
33320     I also replace an expensive `awk (or gawk)' with `cut'.
33321
33322     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33323
33324 commit 16664f72850846e645616da1c0fa5afcd6d15f15
33325 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33326 Date:   Sat Nov 17 20:05:26 2007 +0900
33327
33328     [MIPS] Remove useless instructions for initializing $gp.
33329
33330     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33331
33332 commit 03c031d5660ea946c39af6e2e16267da857c609f
33333 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33334 Date:   Sat Oct 27 15:27:06 2007 +0900
33335
33336     [MIPS] MIPS 4K core: Coding style cleanups
33337
33338     No logical changes.
33339
33340     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33341
33342 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
33343 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33344 Date:   Sat Nov 17 20:05:20 2007 +0900
33345
33346     [MIPS] gth2.c: Fix a warning on gth2 build.
33347
33348     gth2.c: In function 'misc_init_r':
33349     gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
33350
33351     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33352
33353 commit 4fbd0741b2b6441da10be93e10267122581b7079
33354 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33355 Date:   Sat Oct 27 15:22:33 2007 +0900
33356
33357     [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
33358
33359     au1x00_eth.c: In function 'au1x00_miiphy_write':
33360     au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
33361
33362     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33363
33364 commit f01320459736f156707425cf8112f98606301aa4
33365 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33366 Date:   Sat Oct 27 15:00:25 2007 +0900
33367
33368     [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
33369
33370     au1x00_eth.c: In function 'au1x00_enet_initialize':
33371     au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
33372     au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
33373     au1x00_eth.c:246: error: for each function it appears in.)
33374     au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
33375     au1x00_eth.c: In function 'au1x00_miiphy_write':
33376     au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
33377     make[1]: *** [au1x00_eth.o] Error 1
33378
33379     Fixed by moving these two functions forward.
33380
33381     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33382
33383 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
33384 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33385 Date:   Sat Oct 27 15:00:25 2007 +0900
33386
33387     MAKEALL: Added missing pb1000 board
33388
33389     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33390
33391 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
33392 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33393 Date:   Sat Oct 27 15:00:24 2007 +0900
33394
33395     [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
33396
33397     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33398
33399 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
33400 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33401 Date:   Sat Oct 27 15:00:24 2007 +0900
33402
33403     [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
33404
33405     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33406
33407 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
33408 Author: Wolfgang Denk <wd@denx.de>
33409 Date:   Sat Nov 17 02:34:38 2007 +0100
33410
33411     Update CHANGELOIG, prepare for -rc4
33412
33413     Signed-off-by: Wolfgang Denk <wd@denx.de>
33414
33415 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
33416 Author: Luotao Fu <l.fu@pengutronix.de>
33417 Date:   Wed Nov 14 18:58:33 2007 +0100
33418
33419     Fix the i2c frequency and default address in rsdproto board
33420
33421     rsdproto board support has wrong I2C frequency and wrong return value
33422     handling.
33423
33424     Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
33425
33426 commit 429c180edad038f91c989cb14b478228092e7054
33427 Author: Wolfgang Denk <wd@denx.de>
33428 Date:   Sat Nov 17 01:45:38 2007 +0100
33429
33430     powerpc: Backout relocation changes for MPC5121, too.
33431
33432     Apply Grant Likely's backout to MPC5121 code, too.
33433
33434     Pointed out by Rafal Jaworowski <raj@semihalf.com>
33435
33436     Signed-off-by: Wolfgang Denk <wd@denx.de>
33437
33438 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
33439 Author: Grant Likely <grant.likely@secretlab.ca>
33440 Date:   Tue Nov 13 22:18:33 2007 -0700
33441
33442     powerpc: Backout relocation changes.
33443
33444     Ugh.  I *hate* to back this change out, but these compiler flags don't
33445     work for relocation on all versions of GCC.  I've not been able to
33446     reproduce the environment in my setup (and hence, not been able to
33447     find a combination that *does* work), so I've got no choice but to go
33448     back to the old gcc flags and linker script.
33449
33450     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33451
33452 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
33453 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33454 Date:   Tue Nov 13 09:11:05 2007 +0100
33455
33456     Fixed mips_io_port_base build errors.
33457
33458     This patch has been sent on:
33459     - 29 Sep 2007
33460
33461     Although mips_io_port_base is currently a part of IDE command, it is quite
33462     fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
33463     it to MIPS general part, and introduce `set_io_port_base()' from Linux.
33464
33465     This patch is triggered by multiple definition of `mips_io_port_base' build
33466     error on gth2 (and tb0229 also needs this fix.)
33467
33468     board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
33469     /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
33470     common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
33471     make: *** [u-boot] Error 1
33472
33473     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
33474     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33475
33476 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
33477 Author: Wolfgang Denk <wd@denx.de>
33478 Date:   Sat Nov 17 01:30:40 2007 +0100
33479
33480     Fix a bug in the slave serial programming mode for the Xilinx
33481     Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
33482     the most significant bit was set, which did not work on any
33483     architecture where "char" defaulted to be an unsigned type.
33484
33485     Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
33486
33487     Signed-off-by: Wolfgang Denk <wd@denx.de>
33488
33489 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
33490 Author: Jon Loeliger <jdl@freescale.com>
33491 Date:   Thu Nov 1 12:23:29 2007 -0500
33492
33493     86xx: Fix broken variable reference when #def DEBUGing.
33494
33495     Sometimes you can't reference the DDR2 controller variables.
33496
33497     Signed-off-by: Jon Loeliger <jdl@freescale.com>
33498
33499 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
33500 Author: Jason Jin <Jason.jin@freescale.com>
33501 Date:   Fri Oct 26 18:32:00 2007 +0800
33502
33503     make 8610 board use pixis reset
33504
33505     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33506
33507 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
33508 Author: Jason Jin <Jason.jin@freescale.com>
33509 Date:   Mon Oct 29 19:26:21 2007 +0800
33510
33511     Unify pixis_reset altbank across board families
33512
33513     Basically, refactor the CFG_PIXIS_VBOOT_MASK values
33514     into the separate board config files.
33515
33516     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33517     Signed-off-by: Jon Loeliger <jdl@freescale.com>
33518
33519 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
33520 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33521 Date:   Wed Nov 7 08:19:21 2007 +0100
33522
33523     Fix warning: pointer targets in assignment differ in signedness
33524
33525     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33526
33527 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
33528 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33529 Date:   Wed Nov 7 08:19:19 2007 +0100
33530
33531     Fix warning differ in signedness in common/cmd_ide.c
33532
33533     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
33534
33535 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
33536 Author: Stefan Roese <sr@denx.de>
33537 Date:   Fri Nov 16 14:16:54 2007 +0100
33538
33539     ppc4xx: Enable 405EX PCIe UTL register configuration
33540
33541     Till now the UTL registers on 405EX were not initialized but left with
33542     their default values. This patch new initializes some of the UTL
33543     registers on 405EX.
33544
33545     Signed-off-by: Stefan Roese <sr@denx.de>
33546
33547 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
33548 Author: Stefan Roese <sr@denx.de>
33549 Date:   Fri Nov 16 14:00:59 2007 +0100
33550
33551     ppc4xx: Update AMCC Makalu for board rev 1.1
33552
33553     This patch adds changes needed for Makalu rev 1.1:
33554
33555     - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
33556     - Enable 2nd ethernet port EMAC1
33557     - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
33558     - Reset PCIe ports via GPIO upon bootup
33559
33560     Signed-off-by: Stefan Roese <sr@denx.de>
33561
33562 commit 4d4faae65e115e327425cd514c1a35146a85166b
33563 Author: Grant Likely <grant.likely@secretlab.ca>
33564 Date:   Mon Sep 24 09:05:31 2007 -0600
33565
33566     Group PCI and PCMCIA drivers in drivers/Makefile
33567
33568     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33569
33570 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
33571 Author: Grant Likely <grant.likely@secretlab.ca>
33572 Date:   Mon Sep 24 09:05:31 2007 -0600
33573
33574     Group block/flash drivers in drivers/Makefile
33575
33576     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33577
33578 commit df58c81551700f058b44cacf55a7997fa63bfe0a
33579 Author: Grant Likely <grant.likely@secretlab.ca>
33580 Date:   Mon Sep 24 09:05:31 2007 -0600
33581
33582     Group USB drivers in drivers/Makefile
33583
33584     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33585
33586 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
33587 Author: Grant Likely <grant.likely@secretlab.ca>
33588 Date:   Mon Sep 24 09:05:30 2007 -0600
33589
33590     Group i2c drivers in drivers/Makefile
33591
33592     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33593
33594 commit ec00c76de0e5971273905998d62d6bb119324218
33595 Author: Grant Likely <grant.likely@secretlab.ca>
33596 Date:   Mon Sep 24 09:05:30 2007 -0600
33597
33598     Group console drivers in drivers/Makefile
33599
33600     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33601
33602 commit 754f230aa01b8c789fc31f8013c2487954073300
33603 Author: Grant Likely <grant.likely@secretlab.ca>
33604 Date:   Mon Sep 24 09:05:30 2007 -0600
33605
33606     Group network drivers in drivers/Makefile
33607
33608     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33609
33610 commit f0037c56b0d12cd46215124667b9f83d60ef9391
33611 Author: Grant Likely <grant.likely@secretlab.ca>
33612 Date:   Mon Sep 24 09:05:30 2007 -0600
33613
33614     Build: split COBJS value into multiple lines
33615
33616     This change is in preparation for condtitionial compile support in the
33617     build system.  By spliting them all into seperate lines now, subsequent
33618     patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
33619     be less invasive and easier to review
33620
33621     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33622
33623 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
33624 Author: Grant Likely <grant.likely@secretlab.ca>
33625 Date:   Mon Sep 24 09:05:30 2007 -0600
33626
33627     Add .gitignore files
33628
33629     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33630     Acked-by: Kim Phillips <kim.phillips@freescale.com>
33631
33632 commit 955413f35f054a82e40042f1dbcf501c6a05719b
33633 Author: Grant Likely <grant.likely@secretlab.ca>
33634 Date:   Thu Nov 15 08:27:52 2007 -0700
33635
33636     Revert "Correct relocation fixup for mpc5xx"
33637
33638     This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
33639     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33640
33641 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
33642 Author: Grant Likely <grant.likely@secretlab.ca>
33643 Date:   Thu Nov 15 08:24:32 2007 -0700
33644
33645     Revert "Correct fixup relocation for MPC5xxx"
33646
33647     This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
33648     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33649
33650 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
33651 Author: Grant Likely <grant.likely@secretlab.ca>
33652 Date:   Thu Nov 15 08:21:04 2007 -0700
33653
33654     Revert "Correct fixup relocation for mpc8220"
33655
33656     This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
33657     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33658
33659 commit 70922342369e5e39b286fe21e768a239ca07a514
33660 Author: Grant Likely <grant.likely@secretlab.ca>
33661 Date:   Thu Nov 15 08:20:57 2007 -0700
33662
33663     Revert "Correct fixup relocation for mpc824x"
33664
33665     This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
33666     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33667
33668 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
33669 Author: Grant Likely <grant.likely@secretlab.ca>
33670 Date:   Thu Nov 15 08:20:50 2007 -0700
33671
33672     Revert "Correct fixup relocation for mpc8260"
33673
33674     This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
33675     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33676
33677 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
33678 Author: Grant Likely <grant.likely@secretlab.ca>
33679 Date:   Thu Nov 15 08:20:43 2007 -0700
33680
33681     Revert "Correct fixup relocation for mpc83xx"
33682
33683     This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
33684     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33685
33686 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
33687 Author: Grant Likely <grant.likely@secretlab.ca>
33688 Date:   Thu Nov 15 08:20:25 2007 -0700
33689
33690     Revert "[MPC512x] Correct fixup relocation"
33691
33692     This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
33693     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
33694
33695 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
33696 Author: Stefan Roese <sr@denx.de>
33697 Date:   Thu Nov 15 14:25:09 2007 +0100
33698
33699     ppc4xx: Small AMCC Kilauea cleanup
33700
33701     Remove not needed pci_target_init() function.
33702
33703     Signed-off-by: Stefan Roese <sr@denx.de>
33704
33705 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
33706 Author: Stefan Roese <sr@denx.de>
33707 Date:   Thu Nov 15 14:23:55 2007 +0100
33708
33709     ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
33710
33711     - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
33712     - Cleanup of the 4xx GPIO functions
33713     - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
33714
33715     Signed-off-by: Stefan Roese <sr@denx.de>
33716
33717 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
33718 Author: Stefan Roese <sr@denx.de>
33719 Date:   Thu Nov 15 14:20:08 2007 +0100
33720
33721     ppc4xx: AMCC Taihu board config file cleanup
33722
33723     This patch makes the AMCC Taihu a little more compatible to the other
33724     AMCC eval boards.
33725
33726     Signed-off-by: Stefan Roese <sr@denx.de>
33727
33728 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
33729 Author: Marian Balakowicz <m8@semihalf.com>
33730 Date:   Thu Nov 15 13:37:28 2007 +0100
33731
33732     [INKA4x0] NG hardware: flash support
33733
33734     Disabled and remove inka4x0 custom flash driver, use CFI flash
33735     driver instead.
33736
33737     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33738
33739 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
33740 Author: Marian Balakowicz <m8@semihalf.com>
33741 Date:   Thu Nov 15 13:29:55 2007 +0100
33742
33743     [INKA4x0] NG hardware: SDRAM support
33744
33745     Add support for three new DDR chips that may  be present on a NG
33746     INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
33747
33748     Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
33749
33750     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33751
33752 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
33753 Author: Marian Balakowicz <m8@semihalf.com>
33754 Date:   Thu Nov 15 13:24:43 2007 +0100
33755
33756     [INKA4x0] NG hardware: platform code update
33757
33758     - Cleanup compile warnings.
33759     - Add missing '\0' in default environment.
33760     - Increase CFG_MONITOR_LEN to 256 KiB.
33761     - Add required CFG_USE_PPCENV.
33762
33763     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
33764
33765 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
33766 Author: Peter Pearse <peter.pearse@arm.com>
33767 Date:   Thu Nov 15 08:58:00 2007 +0000
33768
33769     Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
33770     Remove warnings re onenand_read() & write()
33771
33772 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
33773 Author: Peter Pearse <peter.pearse@arm.com>
33774 Date:   Thu Nov 15 08:45:13 2007 +0000
33775
33776     Correction patch
33777
33778 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
33779 Author: Roy Zang <tie-fei.zang@freescale.com>
33780 Date:   Thu Sep 13 18:52:28 2007 +0800
33781
33782     Enable ULi1575 Ethernet support in 8610HPCD config
33783
33784     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
33785     Acked-by: Jon Loeliger <jdl@freescale.com>
33786
33787 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
33788 Author: Stefan Roese <sr@denx.de>
33789 Date:   Tue Nov 13 08:18:20 2007 +0100
33790
33791     ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
33792
33793     Signed-off-by: Stefan Roese <sr@denx.de>
33794
33795 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
33796 Author: Stefan Roese <sr@denx.de>
33797 Date:   Tue Nov 13 08:06:11 2007 +0100
33798
33799     ppc4xx: Fix 405EX PCIe UTLSET register setup
33800
33801     Signed-off-by: Stefan Roese <sr@denx.de>
33802
33803 commit 1ce55151c85d068f70317a8d65c61058b891afb4
33804 Author: Heiko Schocher <hs@denx.de>
33805 Date:   Tue Nov 13 07:50:29 2007 +0100
33806
33807     [UC101] SRAM now with 2 MB working.
33808
33809     Signed-off-by: Heiko Schocher <hs@denx.de>
33810
33811 commit 2d14684341109a69616e4d6016cd61402d55086f
33812 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33813 Date:   Fri Nov 9 15:37:53 2007 +0100
33814
33815     ppc4xx: Use generic usb-ohci driver for sequoia board
33816
33817     This patch makes the sequoia board use the generic usb-ohci driver
33818     instead of cpu/ppc4xx/usb_ohci.c.
33819
33820     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33821     Signed-off-by: Stefan Roese <sr@denx.de>
33822
33823 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
33824 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33825 Date:   Fri Nov 9 15:37:23 2007 +0100
33826
33827     ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
33828
33829     This patch disables the 44x d-cache on 'usb start' and
33830     reenables it on 'usb stop'. This should be seen as a
33831     temporary fix until the generic usb-ohci driver can
33832     life with d-cache enabled.
33833
33834     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33835     Signed-off-by: Stefan Roese <sr@denx.de>
33836
33837 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
33838 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33839 Date:   Fri Nov 9 15:36:44 2007 +0100
33840
33841     ppc4xx: Remove redundant code from 4xx network driver
33842
33843     This patch removes some redundant code and decrements the end
33844     address of cache flush and invalidate by 1.
33845
33846     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
33847     Signed-off-by: Stefan Roese <sr@denx.de>
33848
33849 commit 5ca9881aad8c413ac2a82868a5e3719178254502
33850 Author: Peter Pearse <peter.pearse@arm.com>
33851 Date:   Fri Nov 9 15:24:26 2007 +0000
33852
33853     Add apollon board support
33854     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
33855
33856 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
33857 Author: Stefan Roese <sr@denx.de>
33858 Date:   Fri Nov 9 12:19:58 2007 +0100
33859
33860     ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
33861
33862     Signed-off-by: Stefan Roese <sr@denx.de>
33863
33864 commit c7f69c340277935a6c19a956421852da944a365f
33865 Author: Stefan Roese <sr@denx.de>
33866 Date:   Fri Nov 9 12:18:54 2007 +0100
33867
33868     ppc4xx: Make output a little shorter on I2C bootrom detection
33869
33870     Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
33871     already print a line with the information which I2C bootrom is
33872     used for bootstrap configuration. So we don't need this extra line
33873     with "I2C boot EEPROM en-/dis-abled".
33874
33875     This patch also has a little code cleanup integrated.
33876
33877     Signed-off-by: Stefan Roese <sr@denx.de>
33878
33879 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
33880 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33881 Date:   Thu Nov 8 12:50:18 2007 -0600
33882
33883     ColdFire: MCF5329 - Remove reset registers from CCM
33884
33885     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33886
33887 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
33888 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33889 Date:   Thu Nov 8 12:31:11 2007 -0600
33890
33891     ColdFire: MCF5329 - Add Reset structure to immap_5329.h
33892
33893     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33894
33895 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
33896 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33897 Date:   Thu Nov 8 12:19:01 2007 -0600
33898
33899     ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
33900
33901     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33902
33903 commit 225a24b5e062ad94627424508ae814f51dbe1a34
33904 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33905 Date:   Wed Nov 7 18:00:54 2007 -0600
33906
33907     ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
33908
33909     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33910
33911 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
33912 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33913 Date:   Wed Nov 7 17:56:15 2007 -0600
33914
33915     ColdFire: MCF532x - Update do_reset() using core reset
33916
33917     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33918
33919 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
33920 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33921 Date:   Wed Nov 7 17:51:00 2007 -0600
33922
33923     ColdFire: Update cpu flag for 4.2-xx compiler
33924
33925     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33926
33927 commit 070ba56115b4da63b46e974287fa4550d4023386
33928 Author: York Sun <yorksun@freescale.com>
33929 Date:   Wed Oct 31 14:59:04 2007 -0500
33930
33931     8610: Add console frame buffer support to FSL 8610 DIU driver.
33932
33933     Add cfb console support to FSL 8610 DIU driver.
33934     Inspect board version from PIXIS to obtain correct pixel format.
33935
33936     Use #define CONFIG_VIDEO in config file to enable fb console.
33937
33938     To switch monitor, set monitor variable to
33939     0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
33940     followed by "diufb init".
33941
33942     Preserve logo bitmap at the top of the fb console.
33943
33944     Signed-off-by: York Sun <yorksun@freescale.com>
33945     Signed-off-by: Jon Loeliger <jdl@freescale.com>
33946
33947 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
33948 Author: York Sun <yorksun@freescale.com>
33949 Date:   Mon Oct 29 13:58:39 2007 -0500
33950
33951     8610: Add 8610 DIU display driver
33952
33953     1280x1024 and 1024x768 @ 32 bpp are supported now.
33954     DVI, Single-link LVDS, Double-link LVDS are all supported.
33955
33956     Environmental variable "monitor" is used to specify monitor port.
33957
33958     A new command "diufb" is introduced to reinitialize monitor
33959     and display a BMP file in the memory. So far, 1-bit, 4-bit,
33960     8-bit and 24-bit BMP formats are supported.
33961
33962         diufb init
33963             - initialize the diu driver
33964         Enable the port specified in the environmental variable "monitor"
33965
33966         diufb addr
33967             - display bmp file in memory.
33968         The bmp image should be no bigger than the resolution, 1280x1024
33969         for DVI and double-link LVDS, 1024x768 for single-link LVDS.
33970
33971     Note, this driver allocate memory but doesn't free it after use
33972     It is written on purpose -- to avoid a failure of reallocation
33973     due to memory fragement.
33974
33975     ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
33976
33977     Signed-off-by: York Sun <yorksun@freescale.com>
33978     Signed-off-by: Jon loeliger <jdl@freescale.com>
33979
33980 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
33981 Author: York Sun <yorksun@freescale.com>
33982 Date:   Wed Oct 31 10:43:59 2007 -0500
33983
33984     FSL: Add a freescale bitmap logo.
33985
33986     This Freescale logo is a 340 x 128 x 4bpp BMP file
33987     that can be displayed by the DIU Framebuffer driver.
33988
33989     Signed-off-by: York Sun <yorksun@freescale.com>
33990     Signed-off-by: Jon Loeliger <jdl@freescale.com>
33991
33992 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
33993 Author: York Sun <yorksun@freescale.com>
33994 Date:   Mon Oct 29 13:57:53 2007 -0500
33995
33996     8610: Make some extra debug environment variables conditional.
33997
33998     One may #define ENV_DEBUG to get them back again.
33999
34000     Signed-off-by: York Sun <yorksun@freescale.com>
34001
34002 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
34003 Author: Jason Jin <Jason.jin@freescale.com>
34004 Date:   Mon Oct 29 19:26:21 2007 +0800
34005
34006     8610: Actually enable pixis_reset CONFIGs
34007
34008     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34009
34010 commit f3bceaab230b4748d0afc4109b6837308f018b40
34011 Author: Jason Jin <Jason.jin@freescale.com>
34012 Date:   Fri Oct 26 18:31:59 2007 +0800
34013
34014     Fix the BAT definition of PCI IO on 8610 board
34015
34016     The address in the BAT register is aligned with the BAT size.
34017     The original definition actually did not define BAT for PCIE2 IO.
34018     This patch fix this.
34019
34020     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34021
34022 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
34023 Author: Jason Jin <Jason.jin@freescale.com>
34024 Date:   Mon Oct 29 19:26:21 2007 +0800
34025
34026     Unify pixis_reset altbank across board families
34027
34028     Basically, refactor the CFG_PIXIS_VBOOT_MASK values
34029     into the separate board config files.
34030
34031     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34032     Signed-off-by: Jon Loeliger <jdl@freescale.com>
34033
34034 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
34035 Author: Jason Jin <Jason.jin@freescale.com>
34036 Date:   Fri Oct 26 18:32:00 2007 +0800
34037
34038     make 8610 board use pixis reset
34039
34040     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
34041
34042 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
34043 Author: Jon Loeliger <jdl@freescale.com>
34044 Date:   Thu Nov 1 12:23:29 2007 -0500
34045
34046     86xx: Fix broken variable reference when #def DEBUGing.
34047
34048     Sometimes you can't reference the DDR2 controller variables.
34049
34050     Signed-off-by: Jon Loeliger <jdl@freescale.com>
34051
34052 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
34053 Author: Roy Zang <tie-fei.zang@freescale.com>
34054 Date:   Mon Nov 5 17:39:24 2007 +0800
34055
34056     Implement general ULi 526x Ethernet driver support in U-boot
34057
34058     This patch implements general ULi 526x Ethernet driver.
34059     Until now, it is the only native Ethernet port on
34060     MPC8610HPCD board, but it could be used on other boards
34061     with ULi 526x Ethernet port as well.
34062
34063     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
34064     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
34065     Acked-by: Jon Loeliger <jdl@freescale.com>
34066     Signed-off-by: Ben Warren <bwarren@qstreams.com>
34067
34068 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
34069 Author: Larry Johnson <lrj@arlinx.com>
34070 Date:   Thu Nov 1 08:46:50 2007 -0500
34071
34072     NET: Add Ethernet 1000BASE-X support for PPC4xx
34073
34074     This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
34075     "miiphy_duplex()".  It also adds function "miiphy_is_1000base_x ()", which
34076     returns non-zero iff the PHY registers are configured for 1000BASE-X.  The
34077     "mii info" command is modified to distinguish between 1000BASE-T and -X.
34078
34079     Signed-off-by: Larry Johnson <lrj@acm.org>
34080     Signed-off-by: Ben Warren <bwarren@qstreams.com>
34081
34082 commit 298035df4948b113d29ac0e694717d34b95bc5dc
34083 Author: Larry Johnson <lrj@arlinx.com>
34084 Date:   Wed Oct 31 11:21:29 2007 -0500
34085
34086     NET: Cosmetic changes
34087
34088     Signed-off-by: Larry Johnson <lrj@acm.org>
34089     Signed-off-by: Ben Warren <bwarren@qstreams.com>
34090
34091 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
34092 Author: Stefan Roese <sr@denx.de>
34093 Date:   Mon Nov 5 07:43:05 2007 +0100
34094
34095     ppc4xx: Make output a little shorter on PCIe detection
34096
34097     Now not max 3 lines but 2 lines are printed per PCIe port.
34098
34099     Signed-off-by: Stefan Roese <sr@denx.de>
34100
34101 commit 992742a5b09d9040adbd156fb90756af66ade310
34102 Author: Wolfgang Denk <wd@denx.de>
34103 Date:   Sat Nov 3 23:09:27 2007 +0100
34104
34105     Cleanup coding style; update CHANGELOG
34106
34107     Signed-off-by: Wolfgang Denk <wd@denx.de>
34108
34109 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
34110 Author: Bruce Adler <bruce.adler@ccpu.com>
34111 Date:   Fri Nov 2 13:15:42 2007 -0700
34112
34113     fix wording in README
34114
34115     Changed the wording to properly describe the shadowing
34116     of the environment from ROM to RAM
34117
34118     Signed-off-by: Bruce Adler <bruce.adler@acm.org>
34119
34120 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
34121 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34122 Date:   Wed Oct 31 02:18:15 2007 +0900
34123
34124     blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
34125
34126     Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34127
34128 commit ec22755799466c8a103664bb3a5e647bf9c238f4
34129 Author: Vlad Lungu <vlad@comsys.ro>
34130 Date:   Thu Oct 25 16:08:14 2007 +0300
34131
34132     Trimmed some variables in ne2000.c
34133
34134     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
34135
34136 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
34137 Author: Zhang Wei <wei.zhang@freescale.com>
34138 Date:   Thu Oct 25 17:51:27 2007 +0800
34139
34140     Fix the issue of usb_kbd driver missing the scan code of key 'z'.
34141
34142     The scan code of the key 'z' is 0x1d, which should be handled.
34143
34144     The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
34145     controller.
34146
34147     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
34148
34149 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
34150 Author: Zhang Wei <wei.zhang@freescale.com>
34151 Date:   Thu Oct 25 17:30:04 2007 +0800
34152
34153     Fix USB support issue for MPC8641HPCN board.
34154
34155     The configuration file has already enabled USB, but it
34156     missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
34157     on MPC8641HPCN can not work because of the wrong USB
34158     register endian.
34159
34160     And add the USB command to U-Boot commands list.
34161
34162     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
34163
34164 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
34165 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34166 Date:   Wed Oct 24 18:16:01 2007 +0200
34167
34168     Use config_cmd_default.h instead of config_cmd_all.h
34169
34170     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34171
34172 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
34173 Author: Marian Balakowicz <m8@semihalf.com>
34174 Date:   Wed Oct 24 01:37:36 2007 +0200
34175
34176     TQM5200: Call usb_cpu_init() during board init
34177
34178     usb_cpu_init() configures GPS USB pins, clocks, etc. and
34179     is required for proper operation of kernel USB subsystem.
34180     This setup was previously done in the kernel by the fixup
34181     code which is being removed, thus low level init must be
34182     done by U-boot now.
34183
34184     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
34185
34186 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
34187 Author: Guennadi Liakhovetski <lg@denx.de>
34188 Date:   Tue Oct 23 16:25:50 2007 +0200
34189
34190     Fix typo in nfs.c
34191
34192     An obvious typo. Originally fixed in linkstation u-boot port.
34193
34194     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
34195
34196 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
34197 Author: Guennadi Liakhovetski <lg@denx.de>
34198 Date:   Tue Oct 23 14:35:05 2007 +0200
34199
34200     Fix a typo in cpu/mpc824x/interrupts.c
34201
34202     Since December 2003 the timer_interrupt_cpu() function in
34203     cpu/mpc824x/interrupts.c contains what seems to be a superfluous
34204     parameter. Remove it.
34205
34206     Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
34207
34208 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
34209 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
34210 Date:   Wed Oct 17 11:13:51 2007 +0200
34211
34212     add ft_cpu_setup(..) on mpc8260
34213
34214     Add ft_cpu_setup(..)-function to adapt it for use with libfdt
34215     based on code from mpc5xxx
34216
34217     Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
34218     --
34219
34220 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
34221 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
34222 Date:   Wed Oct 17 11:18:42 2007 +0200
34223
34224     changes for IDS8247 board support
34225
34226     To get the IDS8247 board working following are done:
34227      - FCC2 is deactivated
34228      - FCC1 is activated
34229      - I2C is activated
34230      - CFI driver is activated
34231      - Adapted for use with LIBFDT
34232
34233     Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
34234     --
34235
34236 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
34237 Author: Stefan Roese <sr@denx.de>
34238 Date:   Sat Nov 3 12:08:28 2007 +0100
34239
34240     ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
34241
34242     This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
34243     Again, only one image supports both targets.
34244
34245     Signed-off-by: Stefan Roese <sr@denx.de>
34246
34247 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
34248 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
34249 Date:   Wed Oct 24 15:48:37 2007 +0200
34250
34251     ATSTK1002: Remove default ethernet addresses
34252
34253     Wolfgang is right: It's not a good idea to set up default initial
34254     ethernet addresses for a board, even though they belong to the local
34255     range.
34256
34257     This will change the failure mode from "IT manager screams at you for
34258     using duplicate ethernet addresses" to a nice error message explaining
34259     that the ethernet address hasn't been set properly.
34260
34261     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
34262
34263 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
34264 Author: Justin Flammia <jflammia@savantav.com>
34265 Date:   Mon Oct 29 17:40:35 2007 -0400
34266
34267     DHCP Client Fix
34268
34269     This is a multi-part message in MIME format.
34270
34271     commit e6e505eae94ed721e123e177489291fc4544b7b8
34272     Author: Justin Flammia <jflammia@savantav.com>
34273     Date:   Mon Oct 29 17:19:03 2007 -0400
34274
34275         Found a bug in the way the DHCP Request packet is built, where the IP address
34276         that is offered by the server is bound to prematurely. This patch is a fix of
34277         that bug where the IP address offered by the DHCP server is not used until
34278         after the DHCP ACK from the server is received.
34279
34280     Signed-off-by: Justin Flammia <jflammia@savantav.com>
34281     Signed-off-by: Ben Warren <bwarren@qstreams.com>
34282
34283 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
34284 Author: Stefan Roese <sr@denx.de>
34285 Date:   Wed Oct 31 20:58:34 2007 +0100
34286
34287     ppc4xx: Fix acadia_nand build problem
34288
34289     Since the cache handling functions were moved from start.S into cache.S
34290     the acadia NAND booting Makfile needs to be adapted accordingly.
34291
34292     Signed-off-by: Stefan Roese <sr@denx.de>
34293
34294 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
34295 Author: Stefan Roese <sr@denx.de>
34296 Date:   Wed Oct 31 20:57:11 2007 +0100
34297
34298     ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
34299
34300     This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
34301     and to the Sequoia TLB init code. Now the cache can be enabled on 44x
34302     boards by defining CONFIG_4xx_DCACHE in the board config file. This
34303     option will disappear, when more boards use is successfully and no
34304     more known problems exist.
34305
34306     This is tested successfully on Sequoia and Katmai. The only problem that
34307     needs to be fixed is, that USB is not working on Sequoia right now, since
34308     it will need some cache handling code too, similar to the 4xx EMAC driver.
34309
34310     Signed-off-by: Stefan Roese <sr@denx.de>
34311
34312 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
34313 Author: Stefan Roese <sr@denx.de>
34314 Date:   Wed Oct 31 20:51:10 2007 +0100
34315
34316     ppc4xx: Enable CPU POST test for 4xx with dcache enabled
34317
34318     Now with caches enabled (i- and d-cache) on 44x, we need a chance to
34319     disable the cache for the CPU POST tests, since these tests consist
34320     of self modifying code. This is done via the new change_tlb() function.
34321
34322     Signed-off-by: Stefan Roese <sr@denx.de>
34323
34324 commit f71b2888b4b3c870909a0341427b2a914246f81f
34325 Author: Stefan Roese <sr@denx.de>
34326 Date:   Wed Oct 31 20:47:26 2007 +0100
34327
34328     ppc4xx: Change 4xx POST ethernet test to handle cached memory too
34329
34330     This patch enables the 4xx EMAC POST driver to work too, when dcache is
34331     enabled.
34332
34333     Signed-off-by: Stefan Roese <sr@denx.de>
34334
34335 commit a2685904061b35a17583d65fe47cdc2686a69eaa
34336 Author: Stefan Roese <sr@denx.de>
34337 Date:   Wed Oct 31 20:45:53 2007 +0100
34338
34339     ppc4xx: Remove temporary TLB entry in POST cache test only for 440
34340
34341     Signed-off-by: Stefan Roese <sr@denx.de>
34342
34343 commit ff768cb168d8157c24a25016dbfbeb465e47f420
34344 Author: Stefan Roese <sr@denx.de>
34345 Date:   Wed Oct 31 18:01:24 2007 +0100
34346
34347     ppc4xx: Change 4xx ethernet driver to handle cached memory too
34348
34349     This patch enables the 4xx EMAC driver to work too, when dcache is
34350     enabled.
34351
34352     Signed-off-by: Stefan Roese <sr@denx.de>
34353
34354 commit 483e09a223c666269ef81d3573a6591b1046b0ef
34355 Author: Stefan Roese <sr@denx.de>
34356 Date:   Wed Oct 31 17:59:22 2007 +0100
34357
34358     ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
34359
34360     This function is used to either turn cache on or off in a specific
34361     memory area.
34362
34363     Signed-off-by: Stefan Roese <sr@denx.de>
34364
34365 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
34366 Author: Stefan Roese <sr@denx.de>
34367 Date:   Wed Oct 31 17:57:52 2007 +0100
34368
34369     ppc4xx: Remove cache definition from 4xx board config files
34370
34371     All 4xx board config files don't need the cache definitions anymore.
34372     These are now defined in common headers.
34373
34374     Signed-off-by: Stefan Roese <sr@denx.de>
34375
34376 commit 9b94ac61d2176185c30adf0793e079ec30e68687
34377 Author: Stefan Roese <sr@denx.de>
34378 Date:   Wed Oct 31 17:55:58 2007 +0100
34379
34380     ppc4xx: Rework 4xx cache support
34381
34382     New cache handling functions added and all existing functions
34383     moved from start.S into seperate cache.S.
34384
34385     Signed-off-by: Stefan Roese <sr@denx.de>
34386
34387 commit 06713773da4ac3d390c63d82641eb553224b27c2
34388 Author: Stefan Roese <sr@denx.de>
34389 Date:   Tue Oct 23 18:03:12 2007 +0200
34390
34391     ppc4xx: Remove compiler warning from previous commit
34392
34393     Signed-off-by: Stefan Roese <sr@denx.de>
34394
34395 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
34396 Author: Stefan Roese <sr@denx.de>
34397 Date:   Tue Oct 23 14:40:30 2007 +0200
34398
34399     ppc4xx: Remove temporary TLB entry in POST cache test
34400
34401     Signed-off-by: Stefan Roese <sr@denx.de>
34402
34403 commit 1338e6a81834099ba19733b69aafd8ef5f098094
34404 Author: Stefan Roese <sr@denx.de>
34405 Date:   Tue Oct 23 14:05:08 2007 +0200
34406
34407     ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
34408
34409     I lately noticed, that newer 4xx board with GBit support sometimes don't
34410     finish link autonegotiation in 4 seconds. Changing this timeout to 5
34411     seconds seems fine here.
34412
34413     Signed-off-by: Stefan Roese <sr@denx.de>
34414
34415 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
34416 Author: Stefan Roese <sr@denx.de>
34417 Date:   Tue Oct 23 14:03:17 2007 +0200
34418
34419     ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
34420
34421     This patch changes all in32/out32 calls to use the recommended in_be32/
34422     out_be32 macros instead.
34423
34424     Signed-off-by: Stefan Roese <sr@denx.de>
34425
34426 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
34427 Author: Stefan Roese <sr@denx.de>
34428 Date:   Thu Oct 25 12:24:59 2007 +0200
34429
34430     ppc4xx: Fix POST ethernet test for Haleakala
34431
34432     The POST ethernet test needed to be changed to dynamically determine
34433     the count of ethernet devices. This code is cloned from the 4xx
34434     ethernet driver.
34435
34436     Signed-off-by: Stefan Roese <sr@denx.de>
34437
34438 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
34439 Author: Stefan Roese <sr@denx.de>
34440 Date:   Tue Oct 23 11:31:05 2007 +0200
34441
34442     ppc4xx: Correct UART input clock calculation and passing to fdt
34443
34444     We now use a value in the gd (global data) structure for the UART input
34445     frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
34446     in get_sys_info().
34447
34448     Signed-off-by: Stefan Roese <sr@denx.de>
34449
34450 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
34451 Author: Stefan Roese <sr@denx.de>
34452 Date:   Tue Oct 23 10:10:08 2007 +0200
34453
34454     ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
34455
34456     The Haleakala is nearly identical with the Kilauea eval board. The only
34457     difference is that the 405EXr only supports one EMAC and one PCIe
34458     interface. This patch adds support for the Haleakala board by using
34459     the identical image for Kilauea and Haleakala. The distinction is done
34460     by comparing the PVR.
34461
34462     Signed-off-by: Stefan Roese <sr@denx.de>
34463
34464 commit 9f798766aa85e62eb8fa8c721e148df609b78137
34465 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
34466 Date:   Tue Oct 23 08:29:10 2007 +0200
34467
34468     ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
34469
34470     This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
34471
34472     Note:
34473     As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
34474     DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
34475     modules are still plugged in. So it is recommended to remove the DIMM
34476     modules while using the NAND booting code with the fixed SDRAM setup!
34477
34478     Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
34479     Signed-off-by: Stefan Roese <sr@denx.de>
34480
34481 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
34482 Author: Stefan Roese <sr@denx.de>
34483 Date:   Mon Oct 22 16:24:44 2007 +0200
34484
34485     ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
34486
34487     Signed-off-by: Stefan Roese <sr@denx.de>
34488
34489 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
34490 Author: Stefan Roese <sr@denx.de>
34491 Date:   Mon Oct 22 16:22:40 2007 +0200
34492
34493     ppc4xx: Rework of 4xx serial driver (4)
34494
34495     Change 4xx_uart.c:
34496
34497     - Use in_8/out_8 macros instead of in8/out8
34498     - No need for UART_BASE marco anymore, now really handled via function
34499       parameter
34500     - serial_init_common() introduced
34501     - Further coding style cleanup
34502
34503     Signed-off-by: Stefan Roese <sr@denx.de>
34504
34505 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
34506 Author: Stefan Roese <sr@denx.de>
34507 Date:   Mon Oct 22 15:45:49 2007 +0200
34508
34509     ppc4xx: Rework of 4xx serial driver (3)
34510
34511     Change all linker scripts to reference the changed driver name iop480_uart.o.
34512
34513     Signed-off-by: Stefan Roese <sr@denx.de>
34514
34515 commit 882ae41274921f9016131806bdeb27e19606f47a
34516 Author: Stefan Roese <sr@denx.de>
34517 Date:   Mon Oct 22 15:44:39 2007 +0200
34518
34519     ppc4xx: Rework of 4xx serial driver (2)
34520
34521     Change all linker scripts to reference the changed driver name 4xx_uart.o.
34522
34523     Note: In most cased all these explicit referencing of these object files
34524     in the linker scripts is not neccessary. Only for manually embedded
34525     environment into the U-Boot image, which is not done is most cases.
34526
34527     Signed-off-by: Stefan Roese <sr@denx.de>
34528
34529 commit ad31e40bed042cb670d0036fea96435007afb838
34530 Author: Stefan Roese <sr@denx.de>
34531 Date:   Mon Oct 22 15:09:59 2007 +0200
34532
34533     ppc4xx: Rework of 4xx serial driver (1)
34534
34535     This patch starts the rework of the PPC4xx serial driver. First we split
34536     the file into two seperate files, one 4xx_uart.c with the 405/440 UART
34537     handling code and the other one iop480_uart.c with the UART code for the
34538     PLX-Tech IOP480 PPC (PPC403 based).
34539
34540     Signed-off-by: Stefan Roese <sr@denx.de>
34541
34542 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
34543 Author: Stefan Roese <sr@denx.de>
34544 Date:   Mon Oct 22 10:30:38 2007 +0200
34545
34546     ppc4xx: Correct UART input clock calculation and passing to fdt
34547
34548     Signed-off-by: Stefan Roese <sr@denx.de>
34549
34550 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
34551 Author: Stefan Roese <sr@denx.de>
34552 Date:   Mon Oct 22 07:34:34 2007 +0200
34553
34554     ppc4xx: Add initial AMCC Makalu 405EX support
34555
34556     Signed-off-by: Stefan Roese <sr@denx.de>
34557
34558 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
34559 Author: Stefan Roese <sr@denx.de>
34560 Date:   Mon Oct 22 07:33:52 2007 +0200
34561
34562     ppc4xx: Add freqUART to CPU speed detection
34563
34564     This value is needed later for the device tree configuration of
34565     the uart clock.
34566
34567     Signed-off-by: Stefan Roese <sr@denx.de>
34568
34569 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
34570 Author: Stefan Roese <sr@denx.de>
34571 Date:   Sun Oct 21 14:26:29 2007 +0200
34572
34573     ppc: Small Kilauea cleanup of config file
34574
34575     Signed-off-by: Stefan Roese <sr@denx.de>
34576
34577 commit 758c037aeead34b49631b8da3a90b1bba14c0410
34578 Author: Stefan Roese <sr@denx.de>
34579 Date:   Sun Oct 21 08:16:12 2007 +0200
34580
34581     rtc: Add Xicor/Intersil X1205 RTC support
34582
34583     This patch adds support for the Xicor/Intersil X1205 RTC used on the
34584     AMCC Makalu eval board. This driver is basically cloned from the Linux
34585     driver version (2.6.23).
34586
34587     This patch also introduces the Linux bcd.h header for the BCD2BIN/
34588     BIN2BCD conversions. In the future some of the other U-Boot RTC driver
34589     should be converted to also use this header instead of implementing
34590     their own local copy of these functions/macros.
34591
34592     Signed-off-by: Stefan Roese <sr@denx.de>
34593
34594 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
34595 Author: Stefan Roese <sr@denx.de>
34596 Date:   Sun Oct 21 08:12:41 2007 +0200
34597
34598     ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
34599
34600     This patch moves some common 4xx macros and the PPC405_SYS_INFO/
34601     PPC440_SYS_INFO structure into the common ppc4xx.h header.
34602
34603     Lot's of other macros are good candidates to be consolidated this way
34604     in the future.
34605
34606     Signed-off-by: Stefan Roese <sr@denx.de>
34607
34608 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
34609 Author: Stefan Roese <sr@denx.de>
34610 Date:   Sun Oct 21 08:05:18 2007 +0200
34611
34612     ppc4xx: Fix size setup in Kilauea DDR2 init routine
34613
34614     The size was initilized wrong. Instead of 256MB, the DDR2 controller
34615     was setup to 512MB. Now the correct values is used.
34616
34617     This patch also does a little cleanup and adds a comment here.
34618
34619     Signed-off-by: Stefan Roese <sr@denx.de>
34620
34621 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
34622 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
34623 Date:   Thu Oct 18 17:29:04 2007 +0200
34624
34625     ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
34626
34627     CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
34628     number is used to access system registers.
34629
34630     Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
34631     Signed-off-by: Stefan Roese <sr@denx.de>
34632
34633 commit c36c68160333ac5fe41ec3db12a728b7075b3912
34634 Author: Stefan Roese <sr@denx.de>
34635 Date:   Thu Oct 18 07:42:27 2007 +0200
34636
34637     ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
34638
34639     On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
34640     is the internal SRAM. Since I now ported and tested this endpoint mode
34641     on Kilauea successfully to map to 0 (SDRAM), I also changed this for
34642     Katmai.
34643
34644     Yucca will stay at internal SRAM for now. Not sure if somebody relies on
34645     this setup.
34646
34647     Signed-off-by: Stefan Roese <sr@denx.de>
34648
34649 commit 5cb4af4791f61843432155142b6cfac901f66c10
34650 Author: Stefan Roese <sr@denx.de>
34651 Date:   Thu Oct 18 07:39:38 2007 +0200
34652
34653     ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
34654
34655     This patch adds endpoint support for the AMCC Kilauea eval board. It can
34656     be tested by connecting a reworked PCIe cable (only 1x lane singles
34657     connected) to another root-complex.
34658
34659     In this test setup, a 64MB inbound window is configured at BAR0 which maps
34660     to 0 on the PLB side. So accessing this BAR0 from the root-complex will
34661     access the first 64MB of the SDRAM on the PPC side.
34662
34663     Signed-off-by: Stefan Roese <sr@denx.de>
34664
34665 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
34666 Author: Stefan Roese <sr@denx.de>
34667 Date:   Sat Oct 13 16:43:23 2007 +0200
34668
34669     ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
34670
34671     This patch adds support for dynamic configuration of PCIe ports for the
34672     AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
34673     boards Yucca & Katmai and the 405EX board Kilauea.
34674
34675     This dynamic configuration is done via the "pcie_mode" environement
34676     variable. This variable can be set to "EP" or "RP" for endpoint or
34677     rootpoint mode. Multiple values can be joined via the ":" delimiter.
34678     Here an example:
34679
34680     pcie_mode=RP:EP:EP
34681
34682     This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
34683     as endpoint.
34684
34685     Per default Yucca will be configured as:
34686     pcie_mode=RP:EP:EP
34687
34688     Per default Katmai will be configured as:
34689     pcie_mode=RP:RP:REP
34690
34691     Per default Kilauea will be configured as:
34692     pcie_mode=RP:RP
34693
34694     Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
34695     Signed-off-by: Stefan Roese <sr@denx.de>
34696
34697 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
34698 Author: Stefan Roese <sr@denx.de>
34699 Date:   Thu Oct 11 11:15:59 2007 +0200
34700
34701     ppc4xx: Enable device tree support (fdt) on Kilauea per default
34702
34703     This patch enables the fdt support on the AMCC Kilauea eval board.
34704     Additionally now EBC ranges fdt fixup is included to support NOR
34705     FLASH mapping via the Linux physmap_of driver.
34706
34707     This Kilauea port now support booting arch/ppc and arch/powerpc
34708     Linux kernels. The default environment "net_nfs" is for arch/ppc
34709     and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
34710     support will be removed.
34711
34712     Signed-off-by: Stefan Roese <sr@denx.de>
34713
34714 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
34715 Author: Stefan Roese <sr@denx.de>
34716 Date:   Thu Oct 11 11:11:45 2007 +0200
34717
34718     ppc4xx: Add additional debug info to 4xx fdt support
34719
34720     Signed-off-by: Stefan Roese <sr@denx.de>
34721
34722 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
34723 Author: Stefan Roese <sr@denx.de>
34724 Date:   Fri Oct 5 21:28:58 2007 +0200
34725
34726     ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
34727
34728     Signed-off-by: Stefan Roese <sr@denx.de>
34729
34730 commit 1941cce71b1ae975602854045061e82f94ecd012
34731 Author: Stefan Roese <sr@denx.de>
34732 Date:   Fri Oct 5 17:35:10 2007 +0200
34733
34734     ppc4xx: Fix small merge problem in 4xx_enet.c
34735
34736     Signed-off-by: Stefan Roese <sr@denx.de>
34737
34738 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
34739 Author: Stefan Roese <sr@denx.de>
34740 Date:   Fri Oct 5 17:11:30 2007 +0200
34741
34742     ppc4xx: Add initial AMCC Kilauea 405EX support
34743
34744     Signed-off-by: Stefan Roese <sr@denx.de>
34745
34746 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
34747 Author: Stefan Roese <sr@denx.de>
34748 Date:   Fri Oct 5 17:10:59 2007 +0200
34749
34750     ppc4xx: Add PPC405EX support
34751
34752     Signed-off-by: Stefan Roese <sr@denx.de>
34753
34754 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
34755 Author: Stefan Roese <sr@denx.de>
34756 Date:   Fri Oct 5 17:09:36 2007 +0200
34757
34758     ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
34759
34760     Signed-off-by: Stefan Roese <sr@denx.de>
34761
34762 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
34763 Author: Stefan Roese <sr@denx.de>
34764 Date:   Fri Oct 5 17:07:50 2007 +0200
34765
34766     ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
34767
34768     Signed-off-by: Stefan Roese <sr@denx.de>
34769
34770 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
34771 Author: Stefan Roese <sr@denx.de>
34772 Date:   Fri Oct 5 17:04:57 2007 +0200
34773
34774     POST: Add 405EX support to 4xx UART POST test
34775
34776     Signed-off-by: Stefan Roese <sr@denx.de>
34777
34778 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
34779 Author: Stefan Roese <sr@denx.de>
34780 Date:   Fri Oct 5 15:10:02 2007 +0200
34781
34782     DTT: Prepare DS1775 driver for use of different I2C addresses
34783
34784     Signed-off-by: Stefan Roese <sr@denx.de>
34785
34786 commit 19e93b1e16d267220440d827b920fbad8abfa70f
34787 Author: Stefan Roese <sr@denx.de>
34788 Date:   Fri Oct 5 14:23:43 2007 +0200
34789
34790     ppc4xx: 4xx_pcie: Change PCIe status output to match common style
34791
34792     Signed-off-by: Stefan Roese <sr@denx.de>
34793
34794 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
34795 Author: Stefan Roese <sr@denx.de>
34796 Date:   Fri Oct 5 09:22:33 2007 +0200
34797
34798     ppc4xx: 4xx_pcie: Disable debug output as default
34799
34800     Signed-off-by: Stefan Roese <sr@denx.de>
34801
34802 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
34803 Author: Stefan Roese <sr@denx.de>
34804 Date:   Fri Oct 5 09:18:23 2007 +0200
34805
34806     ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
34807
34808     Signed-off-by: Stefan Roese <sr@denx.de>
34809
34810 commit 4dbee8a90df613eb517aadbecebd70f168913d30
34811 Author: Stefan Roese <sr@denx.de>
34812 Date:   Fri Oct 5 07:57:20 2007 +0200
34813
34814     ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
34815
34816     128MB seems to be the smallest possible value for the memory size
34817     for on PCIe port. With this change now the BAR's of the PCIe cards
34818     are accessible under U-Boot.
34819
34820     One big note: This only works for PCIe port 0 & 1. For port 2 this
34821     currently doesn't work, since the base address is now 0xc0000000
34822     (0xb0000000 + 2 * 0x08000000), and this is already occupied by
34823     CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
34824     to change the base addresses completely and this change would have
34825     too much impact right now.
34826
34827     This patch adds debug output to the 4xx pcie driver too.
34828
34829     Signed-off-by: Stefan Roese <sr@denx.de>
34830
34831 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
34832 Author: Stefan Roese <sr@denx.de>
34833 Date:   Wed Oct 3 21:16:32 2007 +0200
34834
34835     ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
34836
34837     Signed-off-by: Stefan Roese <sr@denx.de>
34838
34839 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
34840 Author: Stefan Roese <sr@denx.de>
34841 Date:   Wed Oct 3 15:01:02 2007 +0200
34842
34843     ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
34844
34845     These files were introduced with the IBM 405GP but are currently used on all
34846     4xx PPC platforms. So the name doesn't match the content anymore. This patch
34847     renames the files to 4xx_pci.c/h.
34848
34849     Signed-off-by: Stefan Roese <sr@denx.de>
34850
34851 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
34852 Author: Stefan Roese <sr@denx.de>
34853 Date:   Wed Oct 3 14:14:58 2007 +0200
34854
34855     ppc4xx: Add a comment for 405EX PCIe endpoint configuration
34856
34857     Signed-off-by: Stefan Roese <sr@denx.de>
34858
34859 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
34860 Author: Stefan Roese <sr@denx.de>
34861 Date:   Wed Oct 3 10:38:09 2007 +0200
34862
34863     ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
34864
34865     (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
34866         the SDR registers of the PCIe ports. This makes the overall design
34867         clearer, since it removed a lot of switch statements which are not
34868         needed anymore.
34869
34870         Also, the functions ppc4xx_init_pcie_rootport() and
34871         ppc4xx_init_pcie_entport() are merged into a single function
34872         ppc4xx_init_pcie_port(), since most of the code was duplicated.
34873         This makes maintainance and porting to other 4xx platforms
34874         easier.
34875
34876     Signed-off-by: Stefan Roese <sr@denx.de>
34877
34878 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
34879 Author: Stefan Roese <sr@denx.de>
34880 Date:   Wed Oct 3 07:48:09 2007 +0200
34881
34882     ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
34883
34884     This patch is the first patch of a series to make the 440SPe PCIe code
34885     usable on different 4xx PPC platforms. In preperation for the new 405EX
34886     which is also equipped with PCIe interfaces.
34887
34888     (2) This patch renames the functions from 440spe_ to 4xx_ with a
34889         little additional cleanup
34890
34891     Signed-off-by: Stefan Roese <sr@denx.de>
34892
34893 commit c7c6da23028f146d912514b95aefa3da7cf37699
34894 Author: Stefan Roese <sr@denx.de>
34895 Date:   Wed Oct 3 07:34:10 2007 +0200
34896
34897     ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
34898
34899     This patch is the first patch of a series to make the 440SPe PCIe code
34900     usable on different 4xx PPC platforms. In preperation for the new 405EX
34901     which is also equipped with PCIe interfaces.
34902
34903     (1) This patch renames the files from 440spe_pcie to 4xx_pcie
34904
34905     Signed-off-by: Stefan Roese <sr@denx.de>
34906
34907 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
34908 Author: Marian Balakowicz <m8@semihalf.com>
34909 Date:   Wed Oct 24 01:37:36 2007 +0200
34910
34911     TQM5200: Call usb_cpu_init() during board init
34912
34913     usb_cpu_init() configures GPS USB pins, clocks, etc. and
34914     is required for proper operation of kernel USB subsystem.
34915     This setup was previously done in the kernel by the fixup
34916     code which is being removed, thus low level init must be
34917     done by U-boot now.
34918
34919     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
34920     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
34921
34922 commit b5af773f8d92677e06f3295b45557c9d0a487c24
34923 Author: Zhang Wei <wei.zhang@freescale.com>
34924 Date:   Thu Oct 25 17:51:27 2007 +0800
34925
34926     Fix the issue of usb_kbd driver missing the scan code of key 'z'.
34927
34928     The scan code of the key 'z' is 0x1d, which should be handled.
34929
34930     The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
34931     controller.
34932
34933     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
34934     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
34935
34936 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
34937 Author: Rodolfo Giometti <giometti@enneenne.com>
34938 Date:   Mon Oct 15 11:59:17 2007 +0200
34939
34940     PXA USB OHCI: "usb stop" implementation.
34941
34942     Some USB keys need to be switched off before loading the kernel
34943     otherwise they can remain in an undefined status which prevents them
34944     to be correctly recognized by the kernel.
34945
34946     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
34947     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
34948
34949 commit 31548249decf18a6b877a18436b6139dd483fe4a
34950 Author: Justin Flammia <jflammia@savantav.com>
34951 Date:   Mon Oct 29 17:40:35 2007 -0400
34952
34953     DHCP Client Fix
34954
34955     This is a multi-part message in MIME format.
34956
34957     commit e6e505eae94ed721e123e177489291fc4544b7b8
34958     Author: Justin Flammia <jflammia@savantav.com>
34959     Date:   Mon Oct 29 17:19:03 2007 -0400
34960
34961         Found a bug in the way the DHCP Request packet is built, where the IP address
34962         that is offered by the server is bound to prematurely. This patch is a fix of
34963         that bug where the IP address offered by the DHCP server is not used until
34964         after the DHCP ACK from the server is received.
34965
34966     Signed-off-by: Justin Flammia <jflammia@savantav.com>
34967     Signed-off-by: Ben Warren <bwarren@qstreams.com>
34968
34969 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
34970 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34971 Date:   Thu Oct 25 17:16:22 2007 -0500
34972
34973     ColdFire 54455: Fix correct boot location for atmel and intel
34974
34975     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34976
34977 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
34978 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34979 Date:   Thu Oct 25 17:14:00 2007 -0500
34980
34981     ColdFire: Fix build error when CONFIG_WATCHDOG is defined
34982
34983     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34984
34985 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
34986 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34987 Date:   Thu Oct 25 17:12:36 2007 -0500
34988
34989     ColdFire 5329: Assign correct SDRAM size and fix cache
34990
34991     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34992
34993 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
34994 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34995 Date:   Thu Oct 25 17:10:23 2007 -0500
34996
34997     ColdFire 5253: Assign correct SDRAM size
34998
34999     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
35000
35001 commit 2acefa72ee0026f862ab65597ca687428f63a973
35002 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
35003 Date:   Thu Oct 25 17:09:17 2007 -0500
35004
35005     ColdFire 5282: Fix external flash boot and return dramsize
35006
35007     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
35008
35009 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
35010 Author: Bartlomiej Sieka <tur@semihalf.com>
35011 Date:   Thu Oct 25 17:20:01 2007 +0200
35012
35013     TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
35014
35015     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35016
35017 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
35018 Author: Martin Krause <martin.krause@tqs.de>
35019 Date:   Wed Oct 24 08:42:25 2007 +0200
35020
35021     TQM5200: fix spurious characters on second serial interface
35022
35023     With this patch PSC3 is configured as UART. This is done, because if
35024     the pins of PSC3 are not configured at all (-> all pins are GPI),
35025     due to crosstalk, spurious characters may be send over the RX232_2_TXD
35026     signal line.
35027
35028     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35029     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35030
35031 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
35032 Author: Martin Krause <martin.krause@tqs.de>
35033 Date:   Wed Oct 24 08:41:27 2007 +0200
35034
35035     TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
35036
35037     Some commands for the STK52xx base board try to access the SM501 grafic
35038     controller. But the TQM5200S has no grafic controller (only the TQM5200
35039     and the TQM5200B have). This patch deactivates the commands accessing
35040     the SM501 for the TQM5200S.
35041
35042     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35043     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35044
35045 commit b31f64343ead9482cd439b1adbe4c34026a641b1
35046 Author: Martin Krause <martin.krause@tqs.de>
35047 Date:   Mon Oct 22 16:45:53 2007 +0200
35048
35049     TQM5200: fix spurious characters on second serial interface
35050
35051     With this patch PSC3 is configured as UART. This is done, because if
35052     the pins of PSC3 are not configured at all (-> all pins are GPI),
35053     due to crosstalk, spurious characters may be send over the RX232_2_TXD
35054     signal line.
35055
35056     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35057
35058 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
35059 Author: Martin Krause <martin.krause@tqs.de>
35060 Date:   Mon Oct 22 16:40:06 2007 +0200
35061
35062     TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
35063
35064     Some commands for the STK52xx base board try to access the SM501 grafic
35065     controller. But the TQM5200S has no grafic controller (only the TQM5200
35066     and the TQM5200B have). This patch deactivates the commands accessing
35067     the SM501 for the TQM5200S.
35068
35069     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35070
35071 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
35072 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35073 Date:   Sun Oct 21 09:14:28 2007 +0200
35074
35075     Mips: Fix string functions differ prototype declaration
35076
35077     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35078
35079 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
35080 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
35081 Date:   Fri Oct 19 17:51:40 2007 -0500
35082
35083     fsl_pci_init enable COMMAND_MEMORY if inbound window
35084
35085     Patch 16e23c3f removed PCSRBAR allocation.  But passing zero windows
35086     to pciauto_setup_device has the side effect of not getting
35087     COMMAND_MEMORY set.
35088
35089     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
35090
35091 commit e9d0d527992566ebef9826962ff1745b2f082b92
35092 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35093 Date:   Fri Oct 19 10:55:24 2007 +0200
35094
35095     delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
35096
35097     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35098
35099 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
35100 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35101 Date:   Fri Oct 19 08:10:15 2007 +0200
35102
35103     fix warning: no return statement in function returning non-void
35104
35105     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35106
35107 commit e78220f6e514206757acfe247297fc9a328a881f
35108 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35109 Date:   Fri Oct 19 06:33:45 2007 +0200
35110
35111     xsengine: Fix no partition type specified, use DOS as default
35112
35113     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35114
35115 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
35116 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35117 Date:   Fri Oct 19 00:24:59 2007 +0200
35118
35119     lubbock: Fix no partition type specified, use DOS as default
35120
35121     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35122
35123 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
35124 Author: Wolfgang Denk <wd@denx.de>
35125 Date:   Tue Oct 23 16:50:03 2007 +0200
35126
35127     Coding style: keep lists sorted; update CHANGELOG
35128
35129     Signed-off-by: Wolfgang Denk <wd@denx.de>
35130
35131 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
35132 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35133 Date:   Fri Oct 19 00:09:05 2007 +0200
35134
35135     Fix missing drivers makefile entries ds1722.c mw_eeprom.c
35136
35137     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35138
35139 commit 96455bfebc9887837095c9051d216f53c61b5f10
35140 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35141 Date:   Fri Oct 19 00:07:39 2007 +0200
35142
35143     Fix warning differ in signedness in board/innokom/innokom.c
35144
35145     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35146
35147 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
35148 Author: Marcel Ziswiler <marcel@ziswiler.com>
35149 Date:   Fri Oct 19 00:25:33 2007 +0200
35150
35151     fix pxa255_idp board
35152
35153     The pxa255_idp being an old unmaintained board showed several issues:
35154     1. CONFIG_INIT_CRITICAL was still defined.
35155     2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
35156     3. Symbol flash_addr was undeclared.
35157     4. The boards lowlevel_init function was still called memsetup.
35158     5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
35159     6. Using -march=armv5 instead of -march=armv5te resulted in lots of
35160     'target CPU does not support interworking' warnings on recent compilers.
35161     7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
35162     indexes rather than the register definitions from the pxa-regs header
35163     file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
35164     avoid any ambiguities.
35165     8. There were several redefinition warnings concerning ICMR, OSMR3,
35166     OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
35167     9. The board configuration file was rather outdated.
35168     10. The part header file defined the vendor, product and revision arrays
35169     as unsigned chars instead of just chars in the block_dev_desc_t
35170     structure.
35171
35172     Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
35173
35174 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
35175 Author: Rune Torgersen <runet@innovsys.com>
35176 Date:   Wed Oct 17 11:56:31 2007 -0500
35177
35178     Make MPC8266ADS command selection more robust
35179
35180     Fix MPC8266 command line definition so it won't break when new commands
35181     are added to u-boot.
35182     Signed-off-by Rune Torgersen <runet@innovsys.com>
35183
35184 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
35185 Author: Bartlomiej Sieka <tur@semihalf.com>
35186 Date:   Tue Oct 23 13:14:10 2007 +0200
35187
35188     Motion-PRO: Update configuration to accomodate next generation board.
35189
35190     New board has faster oscillator and a different Flash chip. This affects:
35191     - CFG_MPC5XXX_CLKIN
35192     - SDRAM timings
35193     - Flash CS configuration (timings)
35194     - Flash sector size, and thus MTD partition layout
35195     - malloc() arena size (due to bigger Flash sectors)
35196     - smaller memory test range (due to bigger malloc() arena)
35197
35198     This patch also enables more extensive memory testing via "mtest".
35199
35200     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35201
35202 commit eff501904df2bf1724a750062628ba2c51dbb1f8
35203 Author: Bartlomiej Sieka <tur@semihalf.com>
35204 Date:   Tue Oct 23 11:36:07 2007 +0200
35205
35206     Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
35207
35208     Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
35209     register must be written a value of 0x00000004 as the first step of the
35210     SDRAM contorller configuration.
35211
35212     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35213
35214 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
35215 Author: Peter Pearse <peter.pearse@arm.com>
35216 Date:   Tue Oct 23 10:22:16 2007 +0100
35217
35218     Move PL01* serial drivers to drivers/serial and adjust Makefiles.
35219
35220 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
35221 Author: Stefan Roese <sr@denx.de>
35222 Date:   Tue Oct 23 10:17:42 2007 +0200
35223
35224     ppc4xx: lwmon5: Some further GPIO config changes
35225
35226     Signed-off-by: Stefan Roese <sr@denx.de>
35227
35228 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
35229 Author: Vlad Lungu <vlad@comsys.ro>
35230 Date:   Sun Oct 21 22:10:10 2007 +0900
35231
35232     [MIPS] Fix UNCACHED_SDRAM
35233
35234     PHYSADDR is for physical address, KSEG1ADDR is for uncached.
35235
35236     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
35237     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35238
35239 commit 00101dd7a32d12f698150123e47e4b3420279f86
35240 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35241 Date:   Sun Oct 21 21:30:42 2007 +0900
35242
35243     [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
35244
35245     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35246
35247 commit eb700636db017d310edaeb559b13d82588560674
35248 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35249 Date:   Sun Oct 21 10:55:37 2007 +0900
35250
35251     [MIPS] u-boot.lds: Define _gp in a standard manner
35252
35253     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35254
35255 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
35256 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35257 Date:   Sun Oct 21 10:55:36 2007 +0900
35258
35259     [MIPS] Fix $gp usage
35260
35261     Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
35262     As a general principle, we should use _gp for $gp.
35263
35264     Thanks to linker script's help we fortunately have _gp which equals to
35265     _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
35266     be able to access to GOT entires, global variables and procedure entry
35267     points. The right thing to do is to use _gp.
35268
35269     This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
35270     which holds the offset from _gp. When updating GOT entries, we use this
35271     offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
35272
35273     This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
35274     I made some change to leave over num_got_entries.
35275
35276     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35277     Cc: Vlad Lungu <vlad@comsys.ro>
35278
35279 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
35280 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35281 Date:   Sun Oct 21 10:55:36 2007 +0900
35282
35283     [MIPS] u-boot.lds: Fix __got_start and __got_end
35284
35285     Ensure that __got_start points to top of the `.got', and __got_end points
35286     to bottom as well, so that we never fail to count num_got_entries.
35287
35288     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35289
35290 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
35291 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35292 Date:   Sun Oct 21 10:55:36 2007 +0900
35293
35294     [MIPS] u-boot.lds: Remove duplicated .sdata section
35295
35296     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
35297
35298 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
35299 Author: Wolfgang Denk <wd@denx.de>
35300 Date:   Sun Oct 21 01:01:17 2007 +0200
35301
35302     Minor coding style cleanup; update CHANGELOG
35303
35304     Signed-off-by: Wolfgang Denk <wd@denx.de>
35305
35306 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
35307 Author: Vlad Lungu <vlad@comsys.ro>
35308 Date:   Thu Oct 4 20:47:10 2007 +0300
35309
35310     Fix NE2000 driver:
35311
35312     Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
35313     to do anything in eth_stop() if eth_init() was not called.
35314     Simplified RX path in order to avoid timeouts on really really
35315     fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
35316     clever enough to cope with 1 packet per eth_rx().
35317
35318     Signed-off-by: Vlad Lungu <vlad@comsys.ro>
35319
35320 commit df90968b48fb34fa9072fab150db2ac89678f537
35321 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
35322 Date:   Mon Sep 24 13:32:13 2007 -0400
35323
35324     Setting MSR[DE] in do_reset
35325
35326     Hello,
35327        This patch ensures the soft reset of the board for the 85xx boards
35328        by setting the MSR[DE] in the do_reset function.
35329
35330     Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
35331
35332 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
35333 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
35334 Date:   Mon Sep 24 13:36:01 2007 -0400
35335
35336     MSR overwrite fix
35337
35338     Hello,
35339       This patch fixes the MSR overwrite in the start.S when moving out of
35340       the last 4K page.
35341
35342     Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
35343
35344 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
35345 Author: Dan Wilson <dwilson@fulcrummicro.com>
35346 Date:   Fri Oct 19 11:33:48 2007 -0500
35347
35348     tsec driver should clear RHALT on startup
35349
35350     This was causing problems for some people.
35351
35352     Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
35353     Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
35354     Signed-off-by: Andy Fleming <afleming@freescale.com>
35355
35356 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
35357 Author: Kumar Gala <galak@kernel.crashing.org>
35358 Date:   Thu Oct 11 00:29:18 2007 -0500
35359
35360     Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
35361
35362     On the MPC85xx CDS we have two issues:
35363
35364     1. The device tree fixup code did not check to see if the property we are
35365     trying to update is actually found.  Its possible that it would update
35366     random memory starting at 0.
35367
35368     2. Newer Linux kernel's have moved the location of the PCI nodes to be
35369     sibilings of the soc node and not children.  The explicit PATH to the PCI
35370     node would not be found for these device trees.  Add the ability to handle
35371     both paths.  In the future we shouldn't handle such fixups by explicit path.
35372
35373     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35374
35375 commit a3063eec775719b7e91023bbec3f64b3118791df
35376 Author: Kumar Gala <galak@kernel.crashing.org>
35377 Date:   Thu Oct 11 00:18:48 2007 -0500
35378
35379     Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
35380
35381     On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
35382     console.  Make it so we match that config what we tell Linux as the early
35383     STDOUT console.
35384
35385     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35386
35387 commit e1ce3cb617bb06f91f82f98915391175addf3e82
35388 Author: Kumar Gala <galak@kernel.crashing.org>
35389 Date:   Tue Oct 2 11:12:27 2007 -0500
35390
35391     Remove magic numbers from cache related operations for mpc85xx
35392
35393     The mpc85xx start code uses some magic numbers that we actually
35394     have #defines for in <config.h> so use those instead.
35395
35396     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35397
35398 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
35399 Author: Detlev Zundel <dzu@denx.de>
35400 Date:   Fri Oct 19 16:47:26 2007 +0200
35401
35402     Fix two typos.
35403
35404     Signed-off-by: Detlev Zundel <dzu@denx.de>
35405
35406 commit 281df457c1aa50d2752165d0c5c3282d4027b974
35407 Author: Tony Li <tony.li@freescale.com>
35408 Date:   Thu Oct 18 17:47:19 2007 +0800
35409
35410     mpc83xx: Add configure entry for MPC83xx ATM support
35411
35412     Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
35413     Makfile and MAKEALL
35414
35415     Signed-off-by: Tony Li <tony.li@freescale.com>
35416     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35417
35418 commit d2646554f529a9577515eceb0ec5eceee18244ba
35419 Author: Tony Li <tony.li@freescale.com>
35420 Date:   Thu Oct 18 17:44:38 2007 +0800
35421
35422     mpc83xx: pq-mds-pib.c typo error
35423
35424     Correct to val8 from val.
35425
35426     Signed-off-by: Tony Li <tony.li@freescale.com>
35427     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35428
35429 commit 3e11ae80fec1ee12194940955431186abf6009c2
35430 Author: Stefan Roese <sr@denx.de>
35431 Date:   Wed Oct 17 15:40:19 2007 +0200
35432
35433     ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
35434
35435     Signed-off-by: Stefan Roese <sr@denx.de>
35436
35437 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
35438 Author: Jon Loeliger <jdl@freescale.com>
35439 Date:   Tue Oct 16 15:27:43 2007 -0500
35440
35441     Initial mpc8610hpcd Makefile files.
35442
35443     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
35444     Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
35445     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
35446     Signed-off-by: Jon Loeliger <jdl@freescale.com>
35447
35448 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
35449 Author: Jon Loeliger <jdl@freescale.com>
35450 Date:   Tue Oct 16 15:26:51 2007 -0500
35451
35452     Initial mpc8610hpcd cpu/, README and include/ files.
35453
35454     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
35455     Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
35456     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
35457     Signed-off-by: Jon Loeliger <jdl@freescale.com>
35458
35459 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
35460 Author: Jon Loeliger <jdl@freescale.com>
35461 Date:   Tue Oct 16 13:54:01 2007 -0500
35462
35463     Initial mpc8610hpcd board files.
35464
35465     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
35466     Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
35467     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
35468     Signed-off-by: Jon Loeliger <jdl@freescale.com>
35469
35470 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
35471 Author: runet@innovsys.com <runet@innovsys.com>
35472 Date:   Tue Oct 16 14:50:40 2007 -0500
35473
35474     Make MPC8266ADS board compile again.
35475
35476     Signed-off-by: Runet Torgersen <runet@innovsys.com>
35477
35478 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
35479 Author: Jon Loeliger <jdl@freescale.com>
35480 Date:   Mon Aug 27 12:41:03 2007 -0500
35481
35482     86xx: Allow for fewer DDR slots per memory controller.
35483
35484     As a direct correlation exists between DDR DIMM slots
35485     and SPD EEPROM addresses used to configure them, use
35486     the individually defined SPD_EEPROM_ADDRESS* values to
35487     determine if a DDR DIMM slot should have its SPD
35488     configuration read or not.
35489
35490     Effectively, this now allows for 1 or 2 DIMM slots
35491     per memory controller.
35492
35493     Signed-off-by: Jon Loeliger <jdl@freescale.com>
35494
35495 commit 4d4a945e189a2f384c66432316da2788a0ac1607
35496 Author: Rodolfo Giometti <giometti@enneenne.com>
35497 Date:   Mon Oct 15 11:59:17 2007 +0200
35498
35499     PXA USB OHCI: "usb stop" implementation.
35500
35501     Some USB keys need to be switched off before loading the kernel
35502     otherwise they can remain in an undefined status which prevents them
35503     to be correctly recognized by the kernel.
35504
35505     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
35506
35507 commit e2e93442e558cf1500e92861f99713b2f045ea22
35508 Author: Stefan Roese <sr@denx.de>
35509 Date:   Mon Oct 15 11:39:00 2007 +0200
35510
35511     ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
35512
35513     The I2C bootstrap values that can be setup via the "bootstrap" command,
35514     were setup incorrect regarding the generation of the internal sync PCI
35515     clock. The values for PLB clock == 133MHz were slighly incorrect and the
35516     values for PLB clock == 166MHz were totally incorrect. This could
35517     lead to a hangup upon booting while PCI configuration scan.
35518
35519     This patch fixes this issue and configures valid PCI divisor values
35520     for the sync PCI clock, with respect to the provided external async
35521     PCI frequency.
35522
35523     Here the values of the formula in the chapter 14.2 "PCI clocking"
35524     from the 440EPx users manual:
35525
35526     AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
35527
35528     33MHz async PCI frequency:
35529     PLB = 133:
35530     =>      32 <= 44.3 <= 65        (div = 3)
35531
35532     PLB = 166:
35533     =>      32 <= 55.3 <= 65        (div = 3)
35534
35535     66MHz async PCI frequency:
35536     PLB = 133:
35537     =>      65 <= 66.5 <= 132       (div = 2)
35538
35539     PLB = 166:
35540     =>      65 <= 83 <= 132         (div = 2)
35541
35542     Signed-off-by: Stefan Roese <sr@denx.de>
35543
35544 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
35545 Author: Stefan Roese <sr@denx.de>
35546 Date:   Mon Oct 15 11:29:33 2007 +0200
35547
35548     ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
35549
35550     The BCSR status bit for the 66MHz PCI operation was correctly
35551     addressed (MSB/LSB problem). Now the correct currently setup
35552     PCI frequency is displayed upon bootup.
35553
35554     This patch also fixes this problem on Rainier & Yellowstone, since these
35555     boards use the same souce code as Sequoia & Yosemite do.
35556
35557     Signed-off-by: Stefan Roese <sr@denx.de>
35558
35559 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
35560 Author: Martin Krause <martin.krause@tqs.de>
35561 Date:   Wed Sep 26 17:55:56 2007 +0200
35562
35563     TQM860M: adjust for doubled flash sector size.
35564
35565     Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
35566     doubled sector size.
35567
35568     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35569
35570 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
35571 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
35572 Date:   Wed Sep 26 17:55:54 2007 +0200
35573
35574     TQM8xx: Fix CAN timing.
35575
35576     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35577
35578 commit d43e489baf02afae49077791fb22332d240d8656
35579 Author: Martin Krause <martin.krause@tqs.de>
35580 Date:   Thu Sep 27 14:54:36 2007 +0200
35581
35582     TQM866M: fix SDRAM refresh
35583
35584     At 133 MHz the current SDRAM refresh rate is too fast
35585     (measured 4 * 1.17 us).
35586     CFG_MAMR_PTA changes from 39 to 97. This result
35587     in a refresh rate of 4 * 7.8 us at the default clock
35588     50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
35589     This is a compromise until a new method is found to
35590     adjust the refresh rate.
35591
35592     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35593
35594 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
35595 Author: Martin Krause <martin.krause@tqs.de>
35596 Date:   Wed Sep 26 17:55:55 2007 +0200
35597
35598     TQM866M: adjust for doubled flash sector size.
35599
35600     Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
35601     doubled sector size.
35602
35603     Signed-off-by: Martin Krause <martin.krause@tqs.de>
35604
35605 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
35606 Author: Michal Simek <monstr@monstr.eu>
35607 Date:   Sun Oct 14 16:12:29 2007 +0200
35608
35609     [FIX] XUPV2P change command handling
35610     and remove code violation
35611
35612 commit 636400198228d96983c06657b17f760f5989958e
35613 Author: Wolfgang Denk <wd@denx.de>
35614 Date:   Sun Oct 14 00:13:19 2007 +0200
35615
35616     Prepare for 1.3.0-rc3 release
35617
35618     Signed-off-by: Wolfgang Denk <wd@denx.de>
35619
35620 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
35621 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35622 Date:   Sat Sep 29 13:41:37 2007 +0200
35623
35624     Fix warning differ in signedness in cpu/pxa/mmc.c
35625
35626     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35627
35628 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
35629 Author: Wolfgang Denk <wd@denx.de>
35630 Date:   Sat Oct 13 23:51:14 2007 +0200
35631
35632     Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
35633
35634     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35635     Signed-off-by: Wolfgang Denk <wd@denx.de>
35636
35637 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
35638 Author: Wolfgang Denk <wd@denx.de>
35639 Date:   Sat Oct 13 21:15:39 2007 +0200
35640
35641     Coding Style cleanup.
35642
35643     Signed-off-by: Wolfgang Denk <wd@denx.de>
35644
35645 commit e1893815b0999410d7a327589611c7b38e95299e
35646 Author: Wolfgang Denk <wd@denx.de>
35647 Date:   Fri Oct 12 15:49:39 2007 +0200
35648
35649     GP3 SSA: enable RTC
35650
35651     Signed-off-by: Wolfgang Denk <wd@denx.de>
35652
35653 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
35654 Author: Grzegorz Bernacki <gjb@semihalf.com>
35655 Date:   Tue Oct 9 13:58:24 2007 +0200
35656
35657     [ads5121] EEPROM support added.
35658
35659     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
35660
35661 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
35662 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
35663 Date:   Sat Oct 6 18:55:35 2007 +0200
35664
35665     AVR32: Initialize bi_flash* in board_init_r
35666
35667     The ATSTK1000-specific flash driver intializes bi_flashstart,
35668     bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
35669     driver, don't.
35670
35671     Initialize these in board_init_r instead so that things will still be
35672     set up correctly when we switch to the CFI driver.
35673
35674     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
35675
35676 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
35677 Author: Marian Balakowicz <m8@semihalf.com>
35678 Date:   Fri Oct 5 10:40:54 2007 +0200
35679
35680     tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
35681
35682     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35683
35684 commit 92869195ef8210758d2176230c0a36897afd50ed
35685 Author: Bartlomiej Sieka <tur@semihalf.com>
35686 Date:   Fri Oct 5 09:46:06 2007 +0200
35687
35688     CM5200: Fix missing null-termination in hostname manipulation code
35689
35690     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35691
35692 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
35693 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
35694 Date:   Tue Oct 2 19:09:01 2007 +0200
35695
35696     Fix memtest breakage
35697
35698     CFG_MEMTEST_START uses weird magic involving gd, which fails to
35699     compile. Use hardcoded values instead (we actually know how much RAM
35700     we have on board.)
35701
35702     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
35703
35704 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
35705 Author: Stefan Roese <sr@denx.de>
35706 Date:   Tue Oct 2 11:44:46 2007 +0200
35707
35708     ppc4xx: Coding style cleanup
35709
35710     Signed-off-by: Stefan Roese <sr@denx.de>
35711
35712 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
35713 Author: Stefan Roese <sr@denx.de>
35714 Date:   Tue Oct 2 11:44:19 2007 +0200
35715
35716     ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
35717
35718     Signed-off-by: Stefan Roese <sr@denx.de>
35719
35720 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
35721 Author: Grzegorz Bernacki <gjb@semihalf.com>
35722 Date:   Mon Oct 1 09:51:50 2007 +0200
35723
35724     Program EPLD to force full duplex mode for PHY.
35725
35726     EPLD forces modes of PHY operation. By default full duplex is turned off.
35727     This fix turns it on.
35728
35729     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
35730
35731 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
35732 Author: Timo Ketola <timo.ketola@exertus.fi>
35733 Date:   Mon Sep 24 14:50:32 2007 +0300
35734
35735     Bugfix: Use only one PTD for one endpoint
35736
35737     Original isp116x-hcd code prepared multiple PTDs for longer than 16
35738     byte transfers for one endpoint. That is unnecessary because the
35739     ISP116x is able to split long data from one PTD into multiple
35740     transactions based on the buffer size of the endpoint. It also caused
35741     serious problems if the endpoint NAKed some of the transactions. In
35742     that case ISP116x wouldn't notice that the other PTDs were for the same
35743     endpoint and would try the other PTDs possibly out of order. That would
35744     break the whole transfer.
35745
35746     This patch makes isp116x_submit_job to use one PTD for one transfer.
35747
35748     Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
35749     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
35750
35751 commit 86ec86c04326c3913178a7679aa910de071da75d
35752 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35753 Date:   Thu Sep 27 23:27:47 2007 +0200
35754
35755     Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
35756
35757     Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35758
35759 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
35760 Author: Stefan Roese <sr@denx.de>
35761 Date:   Tue Sep 11 14:12:55 2007 +0200
35762
35763     ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
35764
35765     Signed-off-by: Stefan Roese <sr@denx.de>
35766
35767 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
35768 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
35769 Date:   Wed Sep 26 16:35:54 2007 -0500
35770
35771     85xx io out functions need sync after write.
35772
35773     This fixes the mc146818 rtc_read/write functions for 85xx.
35774
35775     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
35776
35777 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
35778 Author: Grant Likely <grant.likely@secretlab.ca>
35779 Date:   Tue Sep 25 15:48:05 2007 -0600
35780
35781     Fpga: fix incorrect test of CFG_FPGA_XILINX macro
35782
35783     CFG_FPGA_XILINX is a bit value used to test against the value in
35784     CONFIG_FPGA.  Testing for a value will always return TRUE.  I don't
35785     think that is the intention in this code.
35786
35787     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35788
35789 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
35790 Author: Michal Simek <monstr@monstr.eu>
35791 Date:   Mon Sep 24 00:41:30 2007 +0200
35792
35793     [FIX] change command handling and removing code violation
35794
35795 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
35796 Author: Michal Simek <monstr@monstr.eu>
35797 Date:   Mon Sep 24 00:36:06 2007 +0200
35798
35799     [FIX] change sets of commands
35800     because changing of command handling brings
35801     compilation problems
35802
35803 commit cb1bc63b75a232571eb69aa2c8aa919321655845
35804 Author: Michal Simek <monstr@monstr.eu>
35805 Date:   Mon Sep 24 00:30:42 2007 +0200
35806
35807     [FIX] Email reparation & Copyright
35808     Both codes are written by myself without any
35809     support from CTU
35810
35811 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
35812 Author: Michal Simek <monstr@monstr.eu>
35813 Date:   Mon Sep 24 00:25:11 2007 +0200
35814
35815     [PATCH] Change macro name for UartLite
35816     because PowerPC 405 can use UartLite as console
35817
35818 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
35819 Author: Michal Simek <monstr@monstr.eu>
35820 Date:   Mon Sep 24 00:21:19 2007 +0200
35821
35822     [PATCH] Add support for design without interrupt controller
35823     Polling timer
35824
35825 commit 0731933ec8ec45d02ba89b52df673d526873cdde
35826 Author: Michal Simek <monstr@monstr.eu>
35827 Date:   Mon Sep 24 00:19:48 2007 +0200
35828
35829     [FIX] resolve problem with cpu without barrel shifter
35830
35831 commit db14d77995ce515b728b178b63f82babe60e3d56
35832 Author: Michal Simek <monstr@monstr.eu>
35833 Date:   Mon Sep 24 00:18:46 2007 +0200
35834
35835     [FIX] repair email address
35836
35837 commit 481d4328618804add1f818a6c96296121cd0528e
35838 Author: Michal Simek <monstr@monstr.eu>
35839 Date:   Mon Sep 24 00:17:42 2007 +0200
35840
35841     [FIX] repair MFSL commands
35842
35843 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
35844 Author: Michal Simek <monstr@monstr.eu>
35845 Date:   Mon Sep 24 00:08:37 2007 +0200
35846
35847     synchronizition with mainline
35848
35849 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
35850 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35851 Date:   Sun Sep 23 02:42:38 2007 +0900
35852
35853     sh: Add support command of ide with sh
35854
35855     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35856
35857 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
35858 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35859 Date:   Sun Sep 23 02:38:42 2007 +0900
35860
35861     sh: Update Makefile
35862
35863     Add support MS7722SE01 to Makefile.
35864
35865     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35866
35867 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
35868 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35869 Date:   Sun Sep 23 02:31:13 2007 +0900
35870
35871     sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
35872
35873     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35874
35875 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
35876 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35877 Date:   Sun Sep 23 02:19:24 2007 +0900
35878
35879     sh: Update MS7750SE01 platform
35880
35881     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35882
35883 commit 516ad760db3553766267ada01b7d5d727faa4bbd
35884 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35885 Date:   Sun Sep 23 02:17:08 2007 +0900
35886
35887     sh: Remove comment out code from include/asm-sh/cpu_sh4.h
35888
35889     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35890
35891 commit b02bad128669e567fce87d8df823b06a0144b8db
35892 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35893 Date:   Sun Sep 23 02:12:30 2007 +0900
35894
35895     sh: Update core code of SuperH.
35896
35897     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35898
35899 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
35900 Author: Wolfgang Denk <wd@denx.de>
35901 Date:   Thu Sep 20 00:04:14 2007 +0200
35902
35903     v1.3.0-rc2
35904
35905     Signed-off-by: Wolfgang Denk <wd@denx.de>
35906
35907 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
35908 Author: Wolfgang Denk <wd@denx.de>
35909 Date:   Tue Sep 18 21:36:35 2007 +0200
35910
35911     Avoid compiler warning.
35912
35913     Signed-off-by: Wolfgang Denk <wd@denx.de>
35914
35915 commit 8a783a65851bc7421ab69f442261215e21b8891a
35916 Author: Grant Likely <grant.likely@secretlab.ca>
35917 Date:   Tue Sep 18 12:24:57 2007 -0600
35918
35919     Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
35920
35921     /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
35922     nulls in a string differently.  For example, the following statement:
35923         echo "this is a string\0" > afile
35924     Will produce the following with /bin/bash:
35925         "this is a string\0"
35926     But with /bin/dash, will produce:
35927         "this is a string
35928
35929     Bug fixed by moving the embedded null out of the makefile and into the
35930     config header.  Also renamed the macro to avoid usage colision with the same
35931     macro used by other board ports.
35932
35933     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35934
35935 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
35936 Author: Wolfgang Denk <wd@denx.de>
35937 Date:   Tue Sep 18 17:40:27 2007 +0200
35938
35939     MCC200: fix build warning
35940
35941     The MCC200 board config file includes version.h for some customer-
35942     specific setting, which causes warnings with "make depend"; build
35943     version.h before depend.
35944
35945     Signed-off-by: Wolfgang Denk <wd@denx.de>
35946
35947 commit bd86220f58b99d6896198c385fda132f0c980915
35948 Author: Peter Pearse <peter.pearse@arm.com>
35949 Date:   Tue Sep 18 13:07:54 2007 +0100
35950
35951     Move coloured led API to status_led.h
35952     Improve indentation in drivers/at45.c
35953
35954 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
35955 Author: Eirik Aanonsen <eaa@wprmedical.com>
35956 Date:   Tue Sep 18 08:47:20 2007 +0200
35957
35958     Update atstk1002 bootargs.
35959
35960     Updates to atstk1002 U-Boot header file:
35961     - Changed bootargs:
35962         * Set the bootargs for at1002 to point to the SD-card partition instead
35963         * ... of the boot flash.
35964         * Removing the rootfstype since that argument are not needed.
35965
35966     Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
35967     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
35968
35969 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
35970 Author: Eirik Aanonsen <eaa@wprmedical.com>
35971 Date:   Wed Sep 12 13:32:37 2007 +0200
35972
35973     Add some comments to clocks in atstk1002.h
35974
35975     This patch applies some clarifying comments to how the different
35976     clocks are setup according to atstk1002.h Some of the previous
35977     comments where stating wrongful information.
35978
35979     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
35980
35981 commit 97213f32416ead885deafea86774e912ffd60ad0
35982 Author: David Saada <David.Saada@ecitele.com>
35983 Date:   Mon Sep 17 17:04:47 2007 +0200
35984
35985     Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
35986
35987     Signed-off-by: David Saada <david.saada@ecitele.com>
35988
35989 commit 30363e98fa470fbecea5e8bc0f1443352754f303
35990 Author: Stefan Roese <sr@denx.de>
35991 Date:   Mon Sep 17 08:20:47 2007 +0200
35992
35993     Small whitespace cleanup of OneNAND patch
35994
35995     Signed-off-by: Stefan Roese <sr@denx.de>
35996
35997 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
35998 Author: Kyungmin Park <kmpark@infradead.org>
35999 Date:   Mon Sep 10 17:15:14 2007 +0900
36000
36001     OneNAND support (take #2)
36002
36003     [PATCH 3/3] OneNAND support (take #2)
36004
36005     OneNAND support at U-Boot
36006
36007     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
36008
36009 commit 17aa2800457df0c06b41516f46f126712c196219
36010 Author: Kyungmin Park <kmpark@infradead.org>
36011 Date:   Mon Sep 10 17:14:34 2007 +0900
36012
36013     OneNAND support (take #2)
36014
36015     [PATCH 2/3] OneNAND support (take #2)
36016
36017     OneNAND support at U-Boot
36018
36019     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
36020
36021 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
36022 Author: Kyungmin Park <kmpark@infradead.org>
36023 Date:   Mon Sep 10 17:13:49 2007 +0900
36024
36025     OneNAND support (take #2)
36026
36027     [PATCH 1/3] OneNAND support (take #2)
36028
36029     OneNAND support at U-Boot
36030
36031     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
36032
36033 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
36034 Author: Michal Simek <monstr@monstr.eu>
36035 Date:   Sun Sep 16 20:51:57 2007 +0200
36036
36037     [FIX] remove files form repository
36038
36039 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
36040 Author: Wolfgang Denk <wd@denx.de>
36041 Date:   Sun Sep 16 17:10:04 2007 +0200
36042
36043     TQM8xx[LM]: Fix broken environment alignment.
36044
36045     With recent toolchains, the environment sectors were no longer aligned to
36046     sector boundaries. The reason was a combination of two bugs:
36047
36048     1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
36049        for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
36050        this gets defined, is not included here (and cannot be included
36051        without causing lots of problems).
36052
36053        Added a new #define CFG_USE_PPCENV for all boards which really
36054        want to put the environment is a ".ppcenv" section.
36055
36056     2) The linker scripts just include environment.o, silently assuming
36057        that the objects in that file are really in the order in which
36058        they are coded in the C file, i. e. "environment" first, then
36059        "redundand_environment", and "env_size" last. However, current
36060        toolchains (GCC-4.x) reorder the objects, causing the environment
36061        data not to start on a flash sector boundary:
36062
36063        Instead of:                                      we got:
36064
36065         40008000 T environment                  40008000 T env_size
36066         4000c000 T redundand_environment        40008004 T redundand_environment
36067         40010000 T env_size                     4000c004 T environment
36068
36069        Note: this patch fixes just the first part, and cures the alignment
36070        problem by making sure that "env_size" gets placed correctly. However,
36071        we still have a potential issue because primary and redundant
36072        environment sectors are actually swapped, i. e. we have now:
36073
36074         40008000 T redundand_environment
36075         4000c000 T environment
36076         40010000 T env_size
36077
36078        This shall be fixed in the next version.
36079
36080     Signed-off-by: Wolfgang Denk <wd@denx.de>
36081
36082 commit eb6da8050797c204c9d010548424186c7ce32fc1
36083 Author: Wolfgang Denk <wd@denx.de>
36084 Date:   Sun Sep 16 02:39:35 2007 +0200
36085
36086     TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
36087
36088     Signed-off-by: Wolfgang Denk <wd@denx.de>
36089
36090 commit cd2d1602c54cc6957bdef3872272a4b264893960
36091 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
36092 Date:   Mon Sep 10 14:54:56 2007 -0400
36093
36094     Typo fix in tsec.c
36095
36096     Fixup for the break statement in wrong place.
36097
36098     [Patch by urwithsughosh@gmail.com]
36099     Acked-by: Andy Fleming <afleming@freescale.com>
36100     Signed-off-by:      Wolfgang Denk <wd@denx.de>
36101
36102 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
36103 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36104 Date:   Tue Sep 11 17:04:00 2007 +0200
36105
36106     Fix do_div() usage in nand process output
36107
36108     Fix usage of do_div() in nand erase|read|write process output.
36109
36110     The last patch to nand_util.c introduced do_div() instead of libgcc's
36111     implementation. But do_div() returns the quotient in its first
36112     macro parameter and not as result.
36113
36114     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36115
36116 commit c750d2e6692a000a82f29de7bf24e3dc21239161
36117 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36118 Date:   Wed Sep 12 12:36:53 2007 +0200
36119
36120     NAND: Add CFG_NAND_QUIET option
36121
36122     This config option sets the default for the progress information
36123     output behavior that can also be configured through the 'quiet'
36124     environment variable.
36125
36126     The legacy NAND code does not print the current progress info
36127     on the console. So this option is for backward compatibility for
36128     units that are in the field and where setting the quiet variable
36129     is not an option. With CFG_NAND_QUIET set to '1' the console
36130     progress info is turned off. This can still be overwritten
36131     through the environment variable.
36132
36133     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36134
36135 commit dcb88630290d2bcd803386dd4c2be73142994c4f
36136 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
36137 Date:   Thu Sep 13 16:06:05 2007 -0700
36138
36139     ColdFire: fix build error becasue of bad type of mii_init()
36140
36141     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
36142
36143 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
36144 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
36145 Date:   Thu Sep 13 16:04:05 2007 -0700
36146
36147     ColdFire: Fix build error caused by pixis.c
36148
36149     Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
36150
36151     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
36152
36153 commit e21659e30660a1377c42af135a6114efe39801d9
36154 Author: Sam Sparks <SSparks@twacs.com>
36155 Date:   Fri Sep 14 11:14:42 2007 -0600
36156
36157     Update MPC8349ITX*_config to place config.tmp in right place.
36158
36159     MPC834ITX*_config does not store config.tmp at the correct locatation,
36160     causing MPC8349ITXGP to have the wrong TEXT_BASE.
36161
36162     Signed-off-by: Sam Sparks <SSparks@twacs.com>
36163     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36164
36165 commit 1218abf1b5817a39a82399b4b928b00750575bda
36166 Author: Wolfgang Denk <wd@denx.de>
36167 Date:   Sat Sep 15 20:48:41 2007 +0200
36168
36169     Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
36170
36171     Signed-off-by: Wolfgang Denk <wd@denx.de>
36172
36173 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
36174 Author: Dirk Behme <dirk.behme@googlemail.com>
36175 Date:   Sat Sep 15 11:55:42 2007 +0200
36176
36177     Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
36178
36179     As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
36180     function local.
36181
36182     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
36183
36184     [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
36185
36186 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
36187 Author: Michal Simek <monstr@monstr.eu>
36188 Date:   Sat Sep 15 00:03:35 2007 +0200
36189
36190     Synchronize with U-BOOT mainline
36191
36192 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
36193 Author: Sam Sparks <SSparks@twacs.com>
36194 Date:   Fri Sep 14 11:14:42 2007 -0600
36195
36196     Update MPC8349ITX*_config to place config.tmp in right place.
36197
36198     MPC834ITX*_config does not store config.tmp at the correct locatation,
36199     causing MPC8349ITXGP to have the wrong TEXT_BASE.
36200
36201     Signed-off-by: Sam Sparks <SSparks@twacs.com>
36202     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36203     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36204
36205 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
36206 Author: Bartlomiej Sieka <tur@semihalf.com>
36207 Date:   Thu Sep 13 18:21:48 2007 +0200
36208
36209     cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
36210
36211     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36212
36213 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
36214 Author: Bartlomiej Sieka <tur@semihalf.com>
36215 Date:   Thu Sep 13 16:33:59 2007 +0200
36216
36217     tqm5200: Restore customary env. variable boot commands for powerpc kernels
36218
36219     - update default definitions of kernel_addr and fdt_addr env. variables
36220     - make arch/powerpc booting the default scenario
36221     - update MTD partition layout to match the above
36222
36223     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36224
36225 commit f34024d4a328e6edd906456da98d2c537155c4f7
36226 Author: Wolfgang Denk <wd@denx.de>
36227 Date:   Wed Sep 12 00:48:57 2007 +0200
36228
36229     Fix memory corruption problem on STX GP3 SSA Board.
36230
36231     Signed-off-by: Wolfgang Denk <wd@denx.de>
36232
36233 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
36234 Author: Peter Pearse <peter.pearse@arm.com>
36235 Date:   Tue Sep 11 15:35:01 2007 +0100
36236
36237     Final tidy
36238
36239 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
36240 Author: Grzegorz Bernacki <gjb@semihalf.com>
36241 Date:   Tue Sep 11 15:42:11 2007 +0200
36242
36243     [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
36244     scan on second pci bus.
36245
36246     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36247
36248 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
36249 Author: Grzegorz Bernacki <gjb@semihalf.com>
36250 Date:   Tue Sep 11 12:57:52 2007 +0200
36251
36252     [ppc4xx] Individual handling of sdram.c for bamboo_nand build
36253
36254     Bamboo has a file sdram.c which needs special treatment when building in
36255     separate directory. It has to be linked to build directory otherwise it is
36256     not seen.
36257
36258     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36259
36260 commit d45963854eff39d575124d859419bb4953ce2c87
36261 Author: Michal Simek <monstr@monstr.eu>
36262 Date:   Tue Sep 11 00:37:04 2007 +0200
36263
36264     [FIX] Microblaze ML401 - repare FLASH handling
36265
36266 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
36267 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
36268 Date:   Mon Sep 10 16:55:59 2007 +0100
36269
36270     Allocate CPU Architecture Code for STMicroelectronics' ST200.
36271
36272     Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
36273     ---------------------------------------------------
36274
36275 commit 754bac48156f8958d8f6a53a51eda88ab5758929
36276 Author: Wolfgang Denk <wd@denx.de>
36277 Date:   Mon Sep 10 20:42:31 2007 +0200
36278
36279     Update version to match current state.
36280
36281     Signed-off-by: Wolfgang Denk <wd@denx.de>
36282
36283 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
36284 Author: Grzegorz Bernacki <gjb@semihalf.com>
36285 Date:   Mon Sep 10 17:39:08 2007 +0200
36286
36287     [MPC512x] Streamline frame handling in the FEC driver
36288
36289     - convert frame size settings to be derived from a single base
36290     - set frame size to the recommended default value
36291
36292     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36293
36294 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
36295 Author: Kyungmin Park <kmpark@infradead.org>
36296 Date:   Mon Sep 10 11:34:00 2007 +0900
36297
36298     Remove compiler warning: target CPU does not support interworking
36299
36300     Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
36301
36302 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
36303 Author: Wolfgang Denk <wd@denx.de>
36304 Date:   Sun Sep 9 21:21:33 2007 +0200
36305
36306     Fix compile error in spc1920 config.
36307
36308     Signed-off-by: Markus Klotzbücher <mk@denx.de>
36309     Signed-off-by: Wolfgang Denk <wd@denx.de>
36310
36311 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
36312 Author: Grant Likely <grant.likely@secretlab.ca>
36313 Date:   Fri Sep 7 09:25:07 2007 -0600
36314
36315     Bugfix: make bootm+libfdt compile on boards with no flash
36316
36317     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36318
36319 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
36320 Author: Grzegorz Bernacki <gjb@semihalf.com>
36321 Date:   Fri Sep 7 18:35:37 2007 +0200
36322
36323     [PPC440SPe] PCIe environment settings for Katmai and Yucca
36324
36325     - 'pciconfighost' is set by default in order to be able to scan bridges
36326     behind the primary host/PCIe
36327
36328     - 'pciscandelay' env variable is recognized to allow for user-controlled
36329     delay before the PCIe bus enumeration; some peripheral devices require a
36330     significant delay before they can be scanned (e.g. LSI8408E); without the
36331     delay they are not detected
36332
36333     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36334
36335 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
36336 Author: Grzegorz Bernacki <gjb@semihalf.com>
36337 Date:   Fri Sep 7 18:20:23 2007 +0200
36338
36339     [PPC440SPe] Improve PCIe configuration space access
36340
36341     - correct configuration space mapping
36342     - correct bus numbering
36343     - better access to config space
36344
36345     Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
36346     first device on the first bus. We now allow to configure up to 16 buses;
36347     also, scanning for devices behind the PCIe-PCIe bridge is supported, so
36348     peripheral devices farther in hierarchy can be identified.
36349
36350     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36351
36352 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
36353 Author: Grzegorz Bernacki <gjb@semihalf.com>
36354 Date:   Fri Sep 7 17:46:18 2007 +0200
36355
36356     [PPC440SPe] Convert machine check exceptions handling
36357
36358     Convert using fixup mechanism to suppressing MCK for the duration of config
36359     read/write transaction: while fixups work fine with the case of a precise
36360     exception, we identified a major drawback with this approach when there's
36361     an imprecise case. In this scenario there is the following race condition:
36362     the fixup is (by design) set to catch the instruction following the one
36363     actually causing the exception; if an interrupt (e.g. decrementer) happens
36364     between those two instructions, the ISR code is executed before the fixup
36365     handler the machine check is no longer protected by the fixup handler as it
36366     appears as within the ISR code. In consequence the fixup approach is being
36367     phased out and replaced with explicit suppressing of MCK during a PCIe
36368     config read/write cycle.
36369
36370     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36371
36372 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
36373 Author: Wolfgang Denk <wd@denx.de>
36374 Date:   Fri Sep 7 17:43:36 2007 +0200
36375
36376     Fix typo in MAKEALL script.
36377
36378     Signed-off-by: Wolfgang Denk <wd@denx.de>
36379
36380 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
36381 Author: Grzegorz Bernacki <gjb@semihalf.com>
36382 Date:   Fri Sep 7 17:09:21 2007 +0200
36383
36384     [MPC512x] Proper handling of larger frames in the FEC driver
36385
36386     When frame larger than local RX buffer is received, it is split and handled
36387     by two buffer descriptors. Prior to this patch the FEC driver discarded
36388     contents of a buffer descriptor without the 'LAST' bit set, so the first
36389     part of the frame was lost in case of larger frames. This fix allows to
36390     safely combine the two pieces into the whole frame.
36391
36392     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36393
36394 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
36395 Author: Rafal Jaworowski <raj@semihalf.com>
36396 Date:   Fri Sep 7 17:05:36 2007 +0200
36397
36398     [MPC512x] Correct fixup relocation
36399
36400     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
36401
36402 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
36403 Author: Wolfgang Denk <wd@denx.de>
36404 Date:   Fri Sep 7 01:21:25 2007 +0200
36405
36406     Update CHANGELOG, minor coding style cleanup.
36407
36408 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
36409 Author: stefano babic <sbabic@denx.de>
36410 Date:   Thu Aug 30 23:01:49 2007 +0200
36411
36412     PXA270: Added support for TrizepsIV board.
36413
36414     This patch add support for the Trizeps IV module (520Mhz).
36415
36416     Signed-off-by: Stefano Babic <sbabic@denx.de>
36417
36418 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
36419 Author: stefano babic <sbabic@denx.de>
36420 Date:   Thu Aug 30 22:57:04 2007 +0200
36421
36422     PXA270: Add support for multiple serial ports.
36423
36424     This patch adds support for multiple serial ports to the PXA target.
36425     FFUART, BTUART and STUART are supported.
36426
36427     Signed-off-by: Stefano Babic <sbabic@denx.de>
36428
36429 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
36430 Author: stefano babic <sbabic@denx.de>
36431 Date:   Thu Aug 30 22:48:47 2007 +0200
36432
36433     PXA270: fix compile issue (invalid lvalue)
36434
36435     Code is broken for PXA270 due to "invalid lvalue in assignment".
36436
36437     This patch fix it in pxa-regs.h
36438
36439     Signed-off-by: Stefano Babic <sbabic@denx.de>
36440
36441 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
36442 Author: Jason Jin <Jason.jin@freescale.com>
36443 Date:   Thu Aug 30 18:19:05 2007 +0800
36444
36445     Add BUILD_DIR support for bios emulator.
36446
36447     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
36448
36449 commit b4d8a55145442f136982634862341a3e02002bda
36450 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36451 Date:   Fri Aug 31 14:41:51 2007 +0900
36452
36453     [MIPS] Remove inline asm string functions
36454
36455     Stop using inline string functions on MIPS as other ARCHs do so,
36456     since the optimized inline asm versions are not small.
36457
36458     This change is triggered by a following MIPS build error:
36459     common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
36460     common/exports.c:32: undefined reference to `strcmp'
36461     make: *** [u-boot] Error 1
36462
36463     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36464
36465 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
36466 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36467 Date:   Fri Aug 31 14:41:45 2007 +0900
36468
36469     [MIPS] Update asm string header
36470
36471     This patches contains several bugfixes and cleanups in the latest upstream:
36472
36473      - Don't include linux/config.h
36474      - Remove buggy inline version of memscan.
36475      - Merge with Linux 2.6.11-rc3.
36476      - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
36477      - Goodbye mips64.  31704 lines of code bite the dust.
36478      - Replace extern inline with static inline.
36479      - Fix return value of strncpy.
36480      - Remove a bunch more "$1" clobbers.
36481
36482     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
36483
36484 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
36485 Author: Bartlomiej Sieka <tur@semihalf.com>
36486 Date:   Tue Sep 4 17:31:22 2007 +0200
36487
36488     Fix do_bootm_linux() so that multi-file images with FDT blob boot.
36489
36490     Fix incorrect blob address calculation in do_bootm_linux() that prevents
36491     booting the kernel from a multi-file image (kernel + initrd + blob).
36492
36493     Also, make minor updates to the U-Boot's output and to the coding style.
36494
36495     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36496
36497 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
36498 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
36499 Date:   Fri Aug 31 14:29:04 2007 +0200
36500
36501     Add support for Sil680 IDE controller.
36502
36503     o add drivers/sil680.c to support the Sil680 IDE-controller.
36504     o drivers/Makefile: add sil680.o.
36505
36506     Signed-off-by: Gary Jennejohn <garyj@denx.de>
36507
36508 commit e79021223bc339df655e360645a52c457a74b067
36509 Author: Grant Likely <grant.likely@secretlab.ca>
36510 Date:   Thu Sep 6 09:47:40 2007 -0600
36511
36512     bootm/fdt: Only process the fdt if an fdt address was provided
36513
36514     Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
36515     kernels using the board info structure (instead of passing a device tree)
36516     This change allows the old style booting to be used if the fdt argument
36517     was not passed to 'bootm'.
36518
36519     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36520     Acked-by: Kim Phillips <kim.phillips@freescale.com>
36521
36522 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
36523 Author: Grant Likely <grant.likely@secretlab.ca>
36524 Date:   Thu Sep 6 09:46:23 2007 -0600
36525
36526     Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
36527
36528     Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
36529
36530     Tested on: lite5200b
36531
36532     Note: the fixup functions have not been moved to a common place.  This
36533     patch is targeted for immediate merging as in solves a build issue, but
36534     the final name/location of the fixups is still subject to debate.  I
36535     propose to merge this now, and move the fixups in the next merge window
36536     to be usable by all targets.
36537
36538     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36539
36540 commit 41bb76e941929f54a73206fb132f7a4c275543a3
36541 Author: Grant Likely <grant.likely@secretlab.ca>
36542 Date:   Thu Sep 6 09:46:17 2007 -0600
36543
36544     libfdt: add convenience function fdt_find_and_setprop()
36545
36546     Given the path to a node, fdt_find_and_setprop() allows a property value
36547     to be set directly.
36548
36549     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36550
36551 commit 80767a6cead9990d9e77e62be947843c2c72f469
36552 Author: Peter Pearse <peter.pearse@arm.com>
36553 Date:   Wed Sep 5 16:04:41 2007 +0100
36554
36555     Changed API name to coloured_led.h
36556     Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
36557     Tidied other cpu/arm920t/start.S code
36558
36559 commit 56a9270521baaa00e12639a978302a67f61ef060
36560 Author: Kumar Gala <galak@kernel.crashing.org>
36561 Date:   Thu Aug 30 16:18:18 2007 -0500
36562
36563     Fix ULI RTC support on MPC8544 DS
36564
36565     The RTC on the M1575 ULI chipset requires a dummy read before
36566     we are able to talk to the RTC.  We accomplish this by adding a
36567     second memory region to the PHB the ULI is on and read from it.
36568
36569     The second region is added to maintain compatiabilty with Linux's
36570     view of the PCI memory map.
36571
36572     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36573
36574 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
36575 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
36576 Date:   Thu Aug 30 01:58:48 2007 -0500
36577
36578     ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
36579
36580     pcie is now differentiated from pci.  Add 8641 bus-range updates.
36581
36582     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
36583
36584 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
36585 Author: Peter Pearse <peter.pearse@arm.com>
36586 Date:   Tue Sep 4 16:18:38 2007 +0100
36587
36588     Add coloured led interface for ARM boards.
36589     Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
36590
36591 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
36592 Author: Peter Pearse <peter.pearse@arm.com>
36593 Date:   Tue Sep 4 14:49:28 2007 +0100
36594
36595     Move include/led.h to board/at91rm9200dk
36596
36597 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
36598 Author: Peter Pearse <peter.pearse@arm.com>
36599 Date:   Tue Sep 4 14:25:51 2007 +0100
36600
36601     Ran Lindent on drivers/at45.c
36602
36603 commit 557ab89d294f08dd532f21d19861b40093200a33
36604 Author: Peter Pearse <peter.pearse@arm.com>
36605 Date:   Tue Sep 4 14:23:50 2007 +0100
36606
36607     Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
36608
36609 commit 81b73dec16fd1227369a191e725e10044a9d56b8
36610 Author: Gary Jennejohn <garyj@denx.de>
36611 Date:   Fri Aug 31 15:21:46 2007 +0200
36612
36613     ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
36614
36615     The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
36616     set to non-zero, because it doesn't support MRM (memory-read-
36617     multiple) correctly. We now added the possibility to configure
36618     this register in the board config file, so that the default value
36619     of 8 can be overridden.
36620
36621     Here the details of this patch:
36622
36623     o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
36624       board-specific settings. As an example the sequoia board requires 0.
36625       Idea from Stefan Roese <sr@denx.de>.
36626     o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
36627       PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
36628     o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
36629       CFG_PCI_CACHE_LINE_SIZE to 0.
36630
36631     Signed-off-by: Gary Jennejohn <garyj@denx.de>
36632     Signed-off-by: Stefan Roese <sr@denx.de>
36633
36634 commit 60174746c668b309378a91488dded898e9553eae
36635 Author: Wolfgang Denk <wd@denx.de>
36636 Date:   Fri Aug 31 10:01:51 2007 +0200
36637
36638     Fix TFTP OACK code for short packets.
36639
36640     The old code had a loop limit overflow bug which caused a semi-
36641     infinite loop for small packets, because in "i<len-8", "i" was signed,
36642     but "len" was unsigned, and "len-8" became a huge number for small
36643     values of "len".
36644
36645     This is a workaround which replaces broken commit 8f1bc284.
36646
36647     Signed-off-by: Wolfgang Denk <wd@denx.de>
36648
36649 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
36650 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
36651 Date:   Thu Aug 30 15:03:05 2007 +0200
36652
36653     Reduce BOOTDELAY variable to 1 second by default for STK1002
36654
36655     Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
36656     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
36657
36658 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
36659 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
36660 Date:   Thu Aug 30 15:03:04 2007 +0200
36661
36662     Remove double quotation marks around MAC address for STK1002
36663
36664     Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
36665     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
36666
36667 commit ff13ac8c7bbebb238e339592de765c546dba1073
36668 Author: Wolfgang Denk <wd@denx.de>
36669 Date:   Thu Aug 30 14:42:15 2007 +0200
36670
36671     Backout commit 8f1bc284 as it causes TFTP to fail.
36672
36673     Signed-off-by: Wolfgang Denk <wd@denx.de>
36674
36675 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
36676 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
36677 Date:   Thu Aug 30 02:26:17 2007 -0500
36678
36679     Revert "Fix MPC8544DS PCIe3 scsi."
36680
36681     This reverts commit 9468e680.
36682     Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
36683
36684     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
36685
36686 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
36687 Author: Grant Likely <grant.likely@secretlab.ca>
36688 Date:   Wed Aug 29 18:26:24 2007 -0600
36689
36690     tftp: don't implicity trust the format of recevied packets
36691
36692     The TFTP OACK code trusts that the incoming packet is formated as
36693     ASCII text and can be processed by string functions. It also has a
36694     loop limit overflow bug where if the packet length is less than 8, it
36695     ends up looping over *all* of memory to find the 'blksize' string.
36696
36697     This patch solves the problem by forcing the packet to be null
36698     terminated and using strstr() to search for the sub string.
36699
36700     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
36701
36702 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
36703 Author: Stefan Roese <sr@denx.de>
36704 Date:   Wed Aug 29 16:31:18 2007 +0200
36705
36706     ppc4xx: Change lwmon5 default environment to support Linux RTC
36707
36708     The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
36709     to supply the RTC I2C address as bootline parameter. This patch
36710     adds support for this rtc probing parameter to the bootargs:
36711
36712     "rtc-pcf8563.probe=0,0x51"
36713
36714     Signed-off-by: Stefan Roese <sr@denx.de>
36715
36716 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
36717 Author: Kim Phillips <kim.phillips@freescale.com>
36718 Date:   Wed Aug 29 09:06:05 2007 -0500
36719
36720     sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
36721
36722     this had slipped through the cracks, since the sbc board was added
36723     after I wrote the original patch to remove all these symbols, and
36724     before it was merged.
36725
36726     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36727
36728 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
36729 Author: Wolfgang Denk <wd@denx.de>
36730 Date:   Wed Aug 29 14:05:30 2007 +0200
36731
36732     Add mii_init() prototype
36733
36734     to get rid of a *lot* of compiler warnings.
36735
36736     Signed-off-by: Wolfgang Denk <wd@denx.de>
36737
36738 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
36739 Author: Wolfgang Denk <wd@denx.de>
36740 Date:   Wed Aug 29 13:35:03 2007 +0200
36741
36742     Disable network support on cmi_mpc5xx board
36743
36744     ..because it caused compiler errors and there seems to be no
36745     board maintainer to take care of this.
36746
36747     Signed-off-by: Wolfgang Denk <wd@denx.de>
36748
36749 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
36750 Author: Kumar Gala <galak@kernel.crashing.org>
36751 Date:   Mon Aug 20 09:44:00 2007 -0500
36752
36753     Fix MPC8544DS PCIe3 scsi.
36754
36755     <ed.swarthout@freescale.com>
36756
36757     The problem is pciauto_setup_device() getting called from fsl_pci_init.c
36758     is allocating memory space it doesn't need.
36759
36760     Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
36761     Signed-off-by: Andy Fleming <afleming@freescale.com>
36762
36763 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
36764 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
36765 Date:   Tue Aug 21 09:38:59 2007 -0500
36766
36767     8548cds fixes
36768
36769     Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
36770     correct consoledev needed for linux boot.
36771     Standardize on fdt{file,addr} var to hold dtb file name.
36772
36773     Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
36774
36775     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
36776
36777 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
36778 Author: Haiying Wang <Haiying.Wang@freescale.com>
36779 Date:   Thu Aug 23 15:20:54 2007 -0400
36780
36781     Enable L2 cache for MPC8568MDS board
36782
36783     The L2 cache size is 512KB for 8568, print out the correct informaiton.
36784
36785     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
36786
36787 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
36788 Author: Jason Jin <Jason.jin@freescale.com>
36789 Date:   Wed Aug 22 17:54:49 2007 +0800
36790
36791     Remove the bios emulator binary files from MAI board
36792
36793     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
36794
36795 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
36796 Author: Kim Phillips <kim.phillips@freescale.com>
36797 Date:   Tue Aug 21 17:00:17 2007 -0500
36798
36799     support board vendor-common makefiles
36800
36801     if a board/$(VENDOR)/common/Makefile exists, build it.
36802
36803     also add the first such case, board/freescale/common/Makefile, to
36804     handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
36805     dictated by board configuration.
36806
36807     thusly get rid of alternate build dir errors such as:
36808
36809     FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
36810
36811     by putting the common/ mkdir command in its proper place (the common
36812     Makefile). Common bits from existing individual board Makefiles have
36813     been removed.
36814
36815     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36816
36817 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
36818 Author: stefano babic <sbabic@denx.de>
36819 Date:   Tue Aug 21 15:52:33 2007 +0200
36820
36821     Fix: TFTP is not working on little endian systems
36822
36823     TFTP does not work anymore after multicast tftp
36824     patch was applied on little endian systems.
36825     This patch fix it.
36826
36827     Signed-off-by: Stefano Babic <sbabic@denx.de>
36828
36829 commit 5f470948570526e9186f053a3003da7719604e90
36830 Author: stefano babic <sbabic@denx.de>
36831 Date:   Tue Aug 21 15:50:33 2007 +0200
36832
36833     Fix MAC address setting in DM9000 driver.
36834
36835     The logic to check if there is a correct MAC address in the DM9000
36836     EEPROM, added in the last patch, is wrong. Now the MAC address is
36837     always taken from the environment, even if a suitable MAC is present
36838     in the EEPROM.
36839
36840     Signed-off-by: Stefano Babic <sbabic@denx.de>
36841
36842 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
36843 Author: Martin Krause <martin.krause@tqs.de>
36844 Date:   Tue Aug 21 12:40:34 2007 +0200
36845
36846     MPC5xxx: fix some compiler warnings in USB code
36847
36848     Fix the following warnings:
36849     - usb.c:xx: warning: function declaration isn't a prototype
36850     - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
36851       from pointer wihtout a cast
36852
36853     Signed-off-by: Martin Krause <martin.krase@tqs.de>
36854
36855 commit 16e23c3f5dab6937f5109365416808c7f15c122b
36856 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
36857 Date:   Mon Aug 20 23:55:33 2007 -0500
36858
36859     fsl_pci_init - Remove self PCSRBAR allocation
36860
36861     CPU physical address space was being wasted by allocating a
36862     PCSRBAR PCI inbound region to it's memory space.
36863
36864     As a rule, PCSRBAR should be left alone since it does not affect
36865     transactions from self and other masters may have changed it.
36866
36867     Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
36868
36869 commit 0e700ce03a23bb1921149bc77008ace7103d5289
36870 Author: Martin Krause <martin.krause@tqs.de>
36871 Date:   Mon Aug 20 13:56:47 2007 +0200
36872
36873     Fix compiler warning in include/s3c2410.h
36874
36875     This patch fixes the "type qualifiers ignored on fuction return tpye"
36876     warning for include/s3c2410.h
36877
36878     Signed-off-by: Martin Krause <martin.krause@tqs.de>
36879
36880 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
36881 Author: Dirk Behme <dirk.behme@googlemail.com>
36882 Date:   Mon Aug 20 07:09:05 2007 +0200
36883
36884     Fix compilation error for omap2420h4_config.
36885
36886     omap2420h4 switched to cfi, so remove old (already disabled) flash.c
36887     and flash_probe() calls in env_flash.c.
36888
36889     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
36890
36891 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
36892 Author: Kim Phillips <kim.phillips@freescale.com>
36893 Date:   Fri Aug 10 14:34:14 2007 -0500
36894
36895     fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
36896
36897     and make some minor corrections to the FDT part of the README.
36898
36899     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36900
36901 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
36902 Author: Wolfgang Denk <wd@denx.de>
36903 Date:   Wed Aug 29 01:32:05 2007 +0200
36904
36905     Minor coding style cleanup.
36906
36907     Signed-off-by: Wolfgang Denk <wd@denx.de>
36908
36909 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
36910 Author: Heiko Schocher <hs@pollux.denx.de>
36911 Date:   Tue Aug 28 17:40:33 2007 +0200
36912
36913     [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
36914
36915     Signed-off-by: Heiko Schocher <hs@denx.de>
36916
36917 commit f98984cb194bb34dbe1db9429d3b51133af30d07
36918 Author: Heiko Schocher <hs@pollux.denx.de>
36919 Date:   Tue Aug 28 17:39:14 2007 +0200
36920
36921     IDE:        - make ide_inb () and ide_outb () "weak", so boards can
36922               define there own I/O functions.
36923               (Needed for the pcs440ep board).
36924             - The default I/O Functions are again 8 Bit accesses.
36925             - Added CONFIG_CMD_IDE for the pcs440ep Board.
36926
36927     Signed-off-by: Heiko Schocher <hs@denx.de>
36928
36929 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
36930 Author: Semih Hazar <semih.hazar@indefia.com>
36931 Date:   Mon Aug 20 19:00:01 2007 +0300
36932
36933     AVR32: Change prototype of memset
36934
36935     Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
36936     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
36937
36938 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
36939 Author: Yuri Tikhonov <yur@emcraft.com>
36940 Date:   Sat Aug 25 05:07:16 2007 +0200
36941
36942     POST: limit memory test area to not touch global data anymore
36943
36944     As experienced on lwmon5, on some boards the POST memory test can
36945     corrupt the global data buffer (bd). This patch fixes this issue
36946     by checking and limiting this area.
36947
36948     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
36949     Signed-off-by: Stefan Roese <sr@denx.de>
36950
36951 commit 75e1a84d483e36be10e206e539b028c4889e1158
36952 Author: Stefan Roese <sr@denx.de>
36953 Date:   Fri Aug 24 15:41:42 2007 +0200
36954
36955     ppc4xx: Add RTC POST test to lwmon5 board configuration
36956
36957     Since this RTC POST test is taking quite a while to complete
36958     it's only initiated upon special keypress same as the complete
36959     memory POST.
36960
36961     Signed-off-by: Stefan Roese <sr@denx.de>
36962
36963 commit d7bfa620037a6d2210159387571bdf93aa32c162
36964 Author: Stefan Roese <sr@denx.de>
36965 Date:   Fri Aug 24 15:19:10 2007 +0200
36966
36967     ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
36968
36969     Signed-off-by: Stefan Roese <sr@denx.de>
36970
36971 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
36972 Author: Stefan Roese <sr@denx.de>
36973 Date:   Thu Aug 23 11:02:37 2007 +0200
36974
36975     ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
36976
36977     This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
36978     board. Now the "eeprom" command can be used to read/write from/to this
36979     device. Additionally a new command was added "eepromwp" to en-/disable
36980     the write-protect of this 2nd EEPROM.
36981
36982     The 1st EEPROM is not affected by this write-protect command.
36983
36984     Signed-off-by: Stefan Roese <sr@denx.de>
36985
36986 commit c64fb30e4c5976007d56fc1789c7a0666082b536
36987 Author: Stefan Roese <sr@denx.de>
36988 Date:   Wed Aug 22 08:56:09 2007 +0200
36989
36990     ppc4xx: Remove unused option CFG_INIT_RAM_OCM
36991
36992     Signed-off-by: Stefan Roese <sr@denx.de>
36993
36994 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
36995 Author: Stefan Roese <sr@denx.de>
36996 Date:   Tue Aug 21 16:27:57 2007 +0200
36997
36998     ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
36999
37000     This patch adds support for the matrix keyboard on the lwmon5 board.
37001     Since the implementation in the dsPCI is kind of compatible with the
37002     "old" lwmon board, most of the code is copied from the lwmon
37003     board directory.
37004
37005     Signed-off-by: Stefan Roese <sr@denx.de>
37006
37007 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
37008 Author: Wolfgang Denk <wd@denx.de>
37009 Date:   Sun Aug 19 10:27:34 2007 +0200
37010
37011     Fix some build errors.
37012
37013     Signed-off-by: Wolfgang Denk <wd@denx.de>
37014
37015 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
37016 Author: Wolfgang Denk <wd@denx.de>
37017 Date:   Sat Aug 18 22:00:38 2007 +0200
37018
37019     Update CHANGELOG.
37020
37021 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
37022 Author: Kim Phillips <kim.phillips@freescale.com>
37023 Date:   Thu Aug 16 22:52:39 2007 -0500
37024
37025     lib_ppc: make board_add_ram_info weak
37026
37027     platforms wishing to display RAM diagnostics in addition to size,
37028     can do so, on one line, in their own board_add_ram_info()
37029     implementation.
37030
37031     this consequently eliminates CONFIG_ADD_RAM_INFO.
37032
37033     Thanks to Stefan for the hint.
37034
37035     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37036
37037 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
37038 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
37039 Date:   Fri Aug 17 12:43:44 2007 +0900
37040
37041     PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
37042
37043     This patch has been sent on:
37044     - 6 Jun 2007
37045
37046     Many users of PCI config read routines tend to ignore the function
37047     ret value, and are only concerned about the contents of *val. Based
37048     on this, pci_hose_read_config_{byte,word}_via_dword should initialize
37049     the *val on dword read error.
37050
37051     Without this fix, for example, we'll go on scanning bus with vendor or
37052     header_type uninitialized. This brings many unnecessary config trials.
37053
37054     Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
37055
37056 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
37057 Author: Stefan Roese <sr@denx.de>
37058 Date:   Sat Aug 18 14:37:52 2007 +0200
37059
37060     ColdFire: Fix some remaining problems with CFG_CMD_
37061
37062     Signed-off-by: Stefan Roese <sr@denx.de>
37063
37064 commit 8280f6a1c43247616b68224675188e5ccd124650
37065 Author: Stefan Roese <sr@denx.de>
37066 Date:   Sat Aug 18 14:33:02 2007 +0200
37067
37068     Coding style cleanup
37069
37070     Signed-off-by: Stefan Roese <sr@denx.de>
37071
37072 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
37073 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37074 Date:   Thu Aug 16 19:23:50 2007 -0500
37075
37076     ColdFire: Add M5235EVB Platform for MCF523x
37077
37078     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37079
37080 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
37081 Author: Kim Phillips <kim.phillips@freescale.com>
37082 Date:   Fri Aug 17 09:30:00 2007 -0500
37083
37084     mpc83xx: fix typo in DDR2 programming
37085
37086     introduced in the implement board_add_ram_info patch as I was cleaning out the
37087     magic numbers.  sorry.
37088
37089     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37090
37091 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
37092 Author: Kim Phillips <kim.phillips@freescale.com>
37093 Date:   Thu Aug 16 22:53:09 2007 -0500
37094
37095     mpc83xx: move freescale boards to boards/freescale
37096
37097     includes build fixes.
37098
37099     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37100
37101 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
37102 Author: Kim Phillips <kim.phillips@freescale.com>
37103 Date:   Thu Aug 16 22:52:59 2007 -0500
37104
37105     mpc83xx: suppress unused variable 'val8' warning
37106
37107     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37108
37109 commit bbea46f76f767b919070b4829bf34c86bd223248
37110 Author: Kim Phillips <kim.phillips@freescale.com>
37111 Date:   Thu Aug 16 22:52:48 2007 -0500
37112
37113     mpc83xx: implement board_add_ram_info
37114
37115     add board_add_ram_info, to make memory diagnostic output more
37116     consistent. u-boot banner output now looks like:
37117
37118     DRAM:  256 MB (DDR1, 64-bit, ECC on)
37119
37120     and for boards with SDRAM on the local bus, a line such as this is
37121     added:
37122
37123     SDRAM: 64 MB (local bus)
37124
37125     also replaced some magic numbers with their equivalent define names.
37126
37127     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37128
37129 commit 14778585d1389d86d5846efec29e5fce892680ce
37130 Author: Tony Li <tony.li@freescale.com>
37131 Date:   Fri Aug 17 10:35:59 2007 +0800
37132
37133     mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
37134
37135     The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
37136     And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
37137
37138     Signed-off-by Tony Li <tony.li@freescale.com>
37139
37140 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
37141 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37142 Date:   Thu Aug 16 15:05:11 2007 -0500
37143
37144     ColdFire: Add M54455EVB for MCF5445x
37145
37146     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37147
37148 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
37149 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37150 Date:   Thu Aug 16 13:20:50 2007 -0500
37151
37152     ColdFire: Add M5253EVBE platform for MCF52x2
37153
37154     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37155
37156 commit a605aacd8324094199402816cc6d9124aba57b8d
37157 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37158 Date:   Thu Aug 16 05:04:31 2007 -0500
37159
37160     ColdFire: Add M5249EVB platform for MCF52x2
37161
37162     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37163
37164 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
37165 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37166 Date:   Wed Aug 15 20:32:06 2007 -0500
37167
37168     ColdFire: Update Freescale MCF52x2 platforms
37169
37170     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37171
37172 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
37173 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37174 Date:   Wed Aug 15 19:55:10 2007 -0500
37175
37176     ColdFire: Update EB+MCF-EV123 platform
37177
37178     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37179
37180 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
37181 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37182 Date:   Wed Aug 15 19:46:38 2007 -0500
37183
37184     ColdFire: update TASREG platform for MCF52x2
37185
37186     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37187
37188 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
37189 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37190 Date:   Wed Aug 15 19:45:51 2007 -0500
37191
37192     ColdFire: update r5200 platform for MCF52x2
37193
37194     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37195
37196 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
37197 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37198 Date:   Wed Aug 15 19:43:20 2007 -0500
37199
37200     ColdFire: idmr platform MCF52x2 update
37201
37202     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37203
37204 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
37205 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37206 Date:   Wed Aug 15 19:41:06 2007 -0500
37207
37208     ColdFire: cobra5272 platform for MCF52x2 update
37209
37210     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37211
37212 commit 56115665b4a64c10c01440c57749b265e0908fa4
37213 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37214 Date:   Wed Aug 15 19:38:15 2007 -0500
37215
37216     ColdFire: MCF52x2 Header files update
37217
37218     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37219
37220 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
37221 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37222 Date:   Wed Aug 15 19:21:21 2007 -0500
37223
37224     ColdFire: MCF52x2 update
37225
37226     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37227
37228 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
37229 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37230 Date:   Wed Aug 15 18:46:11 2007 -0500
37231
37232     ColdFire: MCF5329 update cache
37233
37234     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37235
37236 commit 7171977fb8fd77cfb6676953fa9a05789c450513
37237 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37238 Date:   Wed Aug 15 15:40:20 2007 -0500
37239
37240     ColdFire: MCF5329 header file clean up
37241
37242     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37243
37244 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
37245 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37246 Date:   Wed Aug 15 15:39:17 2007 -0500
37247
37248     ColdFire: MCF5329 Update and cleanup
37249
37250     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37251
37252 commit 10327dc5541f947c0cf7e31fef86c4706169607a
37253 Author: Andy Fleming <afleming@freescale.com>
37254 Date:   Thu Aug 16 16:35:02 2007 -0500
37255
37256     Add CONFIG_HAS_ETH0 to all boards with TSEC
37257
37258     The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
37259     to update TSEC1's device-tree node, so we need to add it
37260     to all the boards with TSECs.  Do this for 83xx and 86xx, too,
37261     since they will eventually do something similar.
37262
37263     Signed-off-by: Andy Fleming <afleming@freescale.com>
37264
37265 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
37266 Author: Kumar Gala <galak@kernel.crashing.org>
37267 Date:   Thu Aug 16 15:05:04 2007 -0500
37268
37269     Update MPC8544 DS PCI memory map
37270
37271     The PCIe bus that the ULI M1575 is connected to has no possible way of
37272     needing more than the fixed amount of IO & Memory space needed by the ULI.
37273
37274     So make it use far less IO & memory space and have it use the shared LAW.  This
37275     free's up a LAW for PCIe1 IO space.  Also reduce the amount of IO space needed
37276     by each bus.
37277
37278     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37279
37280 commit ea5877e31ed63ade948fd1293895ec23fe01472e
37281 Author: Kumar Gala <galak@kernel.crashing.org>
37282 Date:   Thu Aug 16 11:01:21 2007 -0500
37283
37284     Fix up some fdt issues on 8544DS
37285
37286     It looks like we had a merge issue that duplicated a bit of code
37287     in ft_board_setup.  Also, we need to set CONFIG_HAS_ETH0 to get
37288     the MAC address properly set in the device tree on boot for TSEC1
37289
37290     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37291
37292 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
37293 Author: Niklaus Giger <niklaus.giger@netstal.com>
37294 Date:   Thu Aug 16 15:16:03 2007 +0200
37295
37296     PPC4xx:HCU4/5 cleanup
37297
37298     Minor cleanups to confirm to the u-boot coding style.
37299     Some german expressions -> english.
37300     HCU5 enforces a unique IP adress for a given slot in the rack.
37301
37302     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37303
37304 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
37305 Author: Niklaus Giger <niklaus.giger@netstal.com>
37306 Date:   Thu Aug 16 15:16:02 2007 +0200
37307
37308     PPC4xx:HCU4/5 cleanup ecc/sdram init
37309
37310     Make ecc initialisation robust, as DDR2-ECC errors may be generated
37311     while zeroing the RAM.
37312
37313     Return 16 bytes (a cacheline) less than the available memory, as the
37314     board and/or PPC440EPx might have problems accessing the last bytes.
37315
37316     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37317
37318 commit d35b508a55508535b6e8445b718585d27df733d3
37319 Author: Kim Phillips <kim.phillips@freescale.com>
37320 Date:   Wed Aug 15 22:29:56 2007 -0500
37321
37322     fdt: suppress unused variable 'bd' warning
37323
37324     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37325
37326 commit 82bd9ee77490588d4da785d75829ca63d0176baf
37327 Author: Andy Fleming <afleming@freescale.com>
37328 Date:   Wed Aug 15 20:06:50 2007 -0500
37329
37330     Fix warnings from of_data copy fix
37331
37332     Forgot to cast of_flat_tree to ulong.
37333
37334     Signed-off-by: Andy Fleming <afleming@freescale.com>
37335
37336 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
37337 Author: Andy Fleming <afleming@freescale.com>
37338 Date:   Wed Aug 15 20:03:44 2007 -0500
37339
37340     Don't wait for disconnected TSECs
37341
37342     The TSEC driver's PHY code waits a long time for autonegotiation to
37343     complete, even if the link is down.  The PHY knows the link is
37344     down or up before autonegotiation completes, so we can short-circuit
37345     the process if the link is down.
37346
37347     Signed-off-by: Andy Fleming <afleming@freescale.com>
37348
37349 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
37350 Author: Andy Fleming <afleming@freescale.com>
37351 Date:   Wed Aug 15 20:03:34 2007 -0500
37352
37353     Fix numerous bugs in the 8568 UEC support
37354
37355     Actually, fixed a large bug in the UEC for *all* platforms.
37356     How did this ever work?
37357
37358     uec_init() did not follow the spec for eth_init(), and returned
37359     0 on success.  Switch it to return the link like tsec_init()
37360     (and 0 on error)
37361
37362     The immap for the 8568 was defined based on MPC8568, rather than
37363     CONFIG_MPC8568
37364
37365     CONFIG_QE was off
37366
37367     CONFIG_ETHPRIME was set to "Freescale GETH".  Now is "FSL UEC0"
37368
37369     Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
37370     enabled
37371
37372     Signed-off-by: Andy Fleming <afleming@freescale.com>
37373
37374 commit 3a79013e2adda53332dfd0b511066a805e929a9d
37375 Author: Andy Fleming <afleming@freescale.com>
37376 Date:   Wed Aug 15 20:03:25 2007 -0500
37377
37378     Define tsec flag values in config files
37379
37380     The tsec_info structure and array has a "flags" field for each
37381     ethernet controller.  This field is the only reason there are
37382     settings.  Switch to defining TSECn_FLAGS for each controller
37383     in the config header, and we can greatly simplify the array, and
37384     also simplify the addition of future boards.
37385
37386     Signed-off-by: Andy Fleming <afleming@freescale.com>
37387
37388 commit ec7238229507e7f47533a611ea8c53319d234cf3
37389 Author: Andy Fleming <afleming@freescale.com>
37390 Date:   Wed Aug 15 20:03:13 2007 -0500
37391
37392     Add support for building all boards with a TSEC
37393
37394     Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
37395     Now we can do a MAKEALL test on all of them!
37396
37397     Signed-off-by: Andy Fleming <afleming@freescale.com>
37398
37399 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
37400 Author: Andy Fleming <afleming@freescale.com>
37401 Date:   Wed Aug 15 17:30:56 2007 -0500
37402
37403     Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
37404
37405     The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
37406     neglected to *also* put the code inside the similar #ifdef
37407     for CONFIG_OF_FLAT_TREE.
37408
37409     Signed-off-by: Andy Fleming <afleming@freescale.com>
37410
37411 commit 78f9fef7f406078c8bf7191e665a73f795157746
37412 Author: Scott Wood <scottwood@freescale.com>
37413 Date:   Wed Aug 15 15:46:46 2007 -0500
37414
37415     mpc885ads: Don't define CONFIG_BZIP2.
37416
37417     bzip2 requires a significant chunk of malloc space, and there isn't
37418     enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
37419     and a downloaded image at 0x400000.
37420
37421     Signed-off-by: Scott Wood <scottwood@freescale.com>
37422
37423 commit 002275a3ed8b114885f6702d6d544d0780dfe689
37424 Author: Michal Simek <Monstr@seznam.cz>
37425 Date:   Thu Aug 16 08:54:10 2007 +0200
37426
37427     Bios emulator - fix microblaze toolchain problem
37428
37429     microblaze CPU have problem with bios_emulator code.
37430     Microblaze toolchain doesn't support PRAGMA PACK.
37431
37432     Signed-off-by: Michal Simek <monstr@monstr.eu>
37433
37434 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
37435 Author: Wolfgang Denk <wd@denx.de>
37436 Date:   Thu Aug 16 11:51:04 2007 +0200
37437
37438     Minor Coding Style fix; Update CHANGELOG file.
37439
37440     Signed-off-by: Wolfgang Denk <wd@denx.de>
37441
37442 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
37443 Author: Stefan Roese <sr@denx.de>
37444 Date:   Thu Aug 16 11:21:49 2007 +0200
37445
37446     ppc4xx: Remove #warning in esd auto_update.c
37447
37448     Signed-off-by: Stefan Roese <sr@denx.de>
37449
37450 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
37451 Author: Stefan Roese <sr@denx.de>
37452 Date:   Fri Jun 22 17:32:28 2007 +0200
37453
37454     ppc7xx: Update CPCI750 board
37455
37456     This small CPCI750 update extends the board specific command
37457     "show_config" to display the Marvell strapping registers and
37458     extends the PCI IDE controller.
37459
37460     Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
37461     Signed-off-by: Stefan Roese <sr@denx.de>
37462
37463 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
37464 Author: Michal Simek <monstr@monstr.eu>
37465 Date:   Thu Aug 16 10:46:28 2007 +0200
37466
37467     [FIX] Changes for bios_emulator code for others architecture
37468
37469 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
37470 Author: Michal Simek <monstr@monstr.eu>
37471 Date:   Thu Aug 16 10:45:09 2007 +0200
37472
37473     [FIX] Remove unused include file
37474
37475 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
37476 Author: Stefan Roese <sr@denx.de>
37477 Date:   Thu Aug 16 10:18:33 2007 +0200
37478
37479     ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
37480
37481     Signed-off-by: Stefan Roese <sr@denx.de>
37482
37483 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
37484 Author: Stefan Roese <sr@denx.de>
37485 Date:   Thu Aug 16 09:54:51 2007 +0200
37486
37487     Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
37488
37489     Signed-off-by: Stefan Roese <sr@denx.de>
37490
37491 commit 02ba7022f62bb75908296c58c63866e1d294b69a
37492 Author: Stefan Roese <sr@denx.de>
37493 Date:   Thu Aug 16 09:52:29 2007 +0200
37494
37495     ppc4xx: Update Sequoia/Rainier bootstrap command
37496
37497     As suggested by David Mitchell, here an update for the Sequoia/Rainier
37498     bootstrap command.
37499
37500     Signed-off-by: Stefan Roese <sr@denx.de>
37501
37502 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
37503 Author: Kim Phillips <kim.phillips@freescale.com>
37504 Date:   Wed Aug 15 22:30:39 2007 -0500
37505
37506     mpc83xx: enable libfdt by default on freescale boards
37507
37508     this enables libfdt code by default for the
37509     freescale mpc8313erdb, mpc832xemds, mpc8349emds,
37510     mpc8349itx and gp boards.
37511
37512     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37513
37514 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
37515 Author: Kim Phillips <kim.phillips@freescale.com>
37516 Date:   Wed Aug 15 22:30:33 2007 -0500
37517
37518     mpc83xx: migrate remaining freescale boards to libfdt
37519
37520     this adds libfdt support code for the freescale
37521     mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
37522     and gp boards.
37523
37524     Boards remain compatible with OF_FLAT_TREE.
37525
37526     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37527
37528 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
37529 Author: Kim Phillips <kim.phillips@freescale.com>
37530 Date:   Wed Aug 15 22:30:26 2007 -0500
37531
37532     mpc83xx: move common /memory node update mechanism to cpu.c
37533
37534     also adds common prototypes to include/common.h.
37535
37536     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37537
37538 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
37539 Author: Kim Phillips <kim.phillips@freescale.com>
37540 Date:   Wed Aug 15 22:30:19 2007 -0500
37541
37542     mpc83xx: remaining 8360 libfdt fixes
37543
37544     PCI clocks and QE frequencies weren't being updated, and the core clock
37545     was being updated incorrectly.  This patch also adds a /memory node if
37546     it doesn't already exist prior to update.
37547
37548     plus some cosmetic trimming to single line comments.
37549
37550     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37551
37552 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
37553 Author: Kim Phillips <kim.phillips@freescale.com>
37554 Date:   Wed Aug 15 22:30:12 2007 -0500
37555
37556     mpc83xx: fix UEC2->1 typo in libfdt setup code
37557
37558     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37559
37560 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
37561 Author: Kim Phillips <kim.phillips@freescale.com>
37562 Date:   Wed Aug 15 22:30:05 2007 -0500
37563
37564     mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
37565
37566     and reorder the existing 83xx maintainers alpha.
37567
37568     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37569
37570 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
37571 Author: Michal Simek <monstr@monstr.eu>
37572 Date:   Wed Aug 15 21:15:05 2007 +0200
37573
37574     [FIX] Resolve problem with warnings
37575     microblaze toolchain don't support PRAGMA PACK.
37576
37577 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
37578 Author: Michal Simek <monstr@monstr.eu>
37579 Date:   Wed Aug 15 21:05:07 2007 +0200
37580
37581     [FIX] Correction command setting for Microblaze boards
37582
37583 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
37584 Author: Michal Simek <monstr@monstr.eu>
37585 Date:   Wed Aug 15 21:03:41 2007 +0200
37586
37587     [FIX] Correction command definition
37588
37589 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
37590 Author: Jon Loeliger <jdl@freescale.com>
37591 Date:   Wed Aug 15 11:55:35 2007 -0500
37592
37593     86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
37594
37595     Remove a leftover in net/tftp.c while we're at it.
37596
37597     Signed-off-by: Jon Loeliger <jdl@freescale.com>
37598
37599 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
37600 Author: Jon Loeliger <jdl@freescale.com>
37601 Date:   Wed Aug 15 12:20:40 2007 -0500
37602
37603     Move the MPC8641HPCN board under board/freescale.
37604
37605     Minor path corrections needed to ensure buildability.
37606
37607     Signed-off-by: Jon Loeliger <jdl@freescale.com>
37608
37609 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
37610 Author: Jon Loeliger <jdl@freescale.com>
37611 Date:   Wed Aug 15 11:46:22 2007 -0500
37612
37613     86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
37614
37615     Remove a leftover in net/tftp.c while we're at it.
37616
37617     Signed-off-by: Jon Loeliger <jdl@freescale.com>
37618
37619 commit 210f463c71917b7a4495c2103c228b9c179ae64d
37620 Author: Jerry Van Baren <gvb.uboot@gmail.com>
37621 Date:   Wed Aug 15 11:13:15 2007 -0400
37622
37623     Fix where the #ifdef CFG_BOOTMAPSZ is placed.
37624
37625     Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
37626     interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
37627     when it should have gone inside of the conditional.  As a result, it
37628     broke non-LIBFDT board builds.
37629
37630     Also added a missing "not." to the comment.
37631
37632     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
37633
37634 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
37635 Author: Niklaus Giger <niklaus.giger@netstal.com>
37636 Date:   Wed Aug 15 12:14:23 2007 +0200
37637
37638     PPC4xx:HCU4/5-Board fix compile warning
37639
37640     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37641
37642 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
37643 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37644 Date:   Tue Aug 14 14:06:45 2007 -0500
37645
37646     Fix malloc size error in ahci_init_one.
37647
37648     Typically this causes scsi init to corrupt the
37649     devlist and break the coninfo command.
37650     Fix a compiler size warning.
37651
37652     Signed-off-by: Jason Jin <jason.jin@freescale.com>
37653     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37654     Acked-by: Andy Fleming <afleming@freescale.com>
37655
37656 commit b361acd64fd2525c081b9b288b0804efe209c0e9
37657 Author: ksi@koi8.net <ksi@koi8.net>
37658 Date:   Tue Aug 14 10:02:16 2007 -0700
37659
37660     TI DaVinci - fix unsupported %hhx format
37661
37662     Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
37663
37664 commit f01dbb5424a81453c81190dd30e945891466f621
37665 Author: Wolfgang Denk <wd@denx.de>
37666 Date:   Tue Aug 14 18:42:36 2007 +0200
37667
37668     Coding style cleanup. Update CHANGELOG.
37669
37670     Signed-off-by: Wolfgang Denk <wd@denx.de>
37671
37672 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
37673 Author: Andy Fleming <afleming@freescale.com>
37674 Date:   Tue Aug 14 10:32:59 2007 -0500
37675
37676     Fix initrd/dtb interaction
37677
37678     The original code would wrongly relocate the blob to be right before
37679     the initrd if it existed.  The blob *must* be within CFG_BOOTMAPSZ,
37680     if it is defined.  So we make two changes:
37681
37682     1) flag the blob for relocation whenever its address is above BOOTMAPSZ
37683
37684     2) If the blob is being relocated, relocate it before kbd, not initrd
37685
37686     Signed-off-by: Andy Fleming <afleming@freescale.com>
37687
37688 commit e54b970173769307a116bd34028b6d0c2eea2a4e
37689 Author: Peter Pearse <peter.pearse@arm.com>
37690 Date:   Tue Aug 14 15:40:00 2007 +0100
37691
37692     Supply spi interface in at45.c
37693
37694 commit 4ce846ec59f36b85d6644a769690ad3feb667575
37695 Author: Stefan Roese <sr@denx.de>
37696 Date:   Tue Aug 14 15:12:01 2007 +0200
37697
37698     POST: Fix merge problem
37699
37700     Signed-off-by: Stefan Roese <sr@denx.de>
37701
37702 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
37703 Author: Stefan Roese <sr@denx.de>
37704 Date:   Tue Aug 14 15:03:17 2007 +0200
37705
37706     Coding style cleanup
37707
37708     Signed-off-by: Stefan Roese <sr@denx.de>
37709
37710 commit 779e975117a75e91fcebe226a63104dbfb924ab1
37711 Author: Stefan Roese <sr@denx.de>
37712 Date:   Tue Aug 14 14:44:41 2007 +0200
37713
37714     ppc4xx: Add initial Zeus (PPC405EP) board support
37715
37716     Signed-off-by: Stefan Roese <sr@denx.de>
37717
37718 commit c5a172a5fd636c12467429e3f7910e53773979c6
37719 Author: Stefan Roese <sr@denx.de>
37720 Date:   Tue Aug 14 14:41:55 2007 +0200
37721
37722     POST: Add option for external ethernet loopback test
37723
37724     When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
37725     is not done using an internal loopback connection, but by assuming
37726     that an external loopback connector is plugged into the board.
37727
37728     Signed-off-by: Stefan Roese <sr@denx.de>
37729
37730 commit eb2b4010ae426245172988804ee8d9193fb41038
37731 Author: Stefan Roese <sr@denx.de>
37732 Date:   Tue Aug 14 14:39:44 2007 +0200
37733
37734     POST: Add ppc405 support to cache and UART POST
37735
37736     Signed-off-by: Stefan Roese <sr@denx.de>
37737
37738 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
37739 Author: Peter Pearse <peter.pearse@arm.com>
37740 Date:   Tue Aug 14 10:46:32 2007 +0100
37741
37742     Replace lost end of at45.c.
37743
37744 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
37745 Author: Peter Pearse <peter.pearse@arm.com>
37746 Date:   Tue Aug 14 10:30:06 2007 +0100
37747
37748     Update Makefiles for merged and split at45.c.
37749
37750 commit 3454cece2db57cb9eb7087995f7e73066a163f71
37751 Author: Peter Pearse <peter.pearse@arm.com>
37752 Date:   Tue Aug 14 10:21:06 2007 +0100
37753
37754     Delete the merged files.
37755
37756 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
37757 Author: Peter Pearse <peter.pearse@arm.com>
37758 Date:   Tue Aug 14 10:14:05 2007 +0100
37759
37760     Add the files.
37761
37762 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
37763 Author: Peter Pearse <peter.pearse@arm.com>
37764 Date:   Tue Aug 14 10:10:52 2007 +0100
37765
37766     Add MACH_TYPE records for several AT91 boards.
37767     Merge to two at45.c files into a common file, split to at45.c and spi.c
37768     Fix spelling error in DM9161 PHY Support.
37769     Initialize at91rm9200 board (and set LED).
37770     Add PIO control for at91rm9200dk LEDs and Mux.
37771     Change dataflash partition boundaries to be compatible with Linux 2.6.
37772
37773     Signed-off-by:      Peter Pearse <peter.pearse@arm.com>
37774     Signed-off-by:      Ulf Samuelsson <ulf@atmel.com>
37775
37776 commit 4ef35e53c693556c54b0c22d6f873de87bade253
37777 Author: Wolfgang Denk <wd@denx.de>
37778 Date:   Tue Aug 14 09:54:46 2007 +0200
37779
37780     Coding style cleanup, update CHANGELOG
37781
37782     Signed-off-by: Wolfgang Denk <wd@denx.de>
37783
37784 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
37785 Author: Wolfgang Denk <wd@denx.de>
37786 Date:   Tue Aug 14 09:47:27 2007 +0200
37787
37788     Coding style cleanup; rebuild CHANGELOG
37789
37790 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
37791 Author: Randy Vinson <rvinson@linuxbox.(none)>
37792 Date:   Tue Feb 27 19:42:22 2007 -0700
37793
37794     85xxCDS: Add make targets for legacy systems.
37795
37796     The PCI ID select values on the Arcadia main board differ depending
37797     on the version of the hardware. The standard configuration supports
37798     Rev 3.1. The legacy target supports Rev 2.x.
37799
37800     Signed-off-by Randy Vinson <rvinson@mvista.com>
37801
37802 commit e41094c7e38177c755fbd9b182018069614f080d
37803 Author: Andy Fleming <afleming@freescale.com>
37804 Date:   Tue Aug 14 01:50:09 2007 -0500
37805
37806     85xxCDS: Enable the VIA PCI-to-ISA bridge.
37807
37808     Author: Randy Vinson <rvinson@linuxbox.(none)>
37809
37810     Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
37811     Arcadia main board.
37812
37813     Signed-off-by: Randy Vinson <rvinson@mvista.com>
37814     Signed-off-by: York Sun <yorksun@freescale.com>
37815
37816 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
37817 Author: Andy Fleming <afleming@freescale.com>
37818 Date:   Tue Aug 14 00:14:25 2007 -0500
37819
37820     Add support for UEC to 8568
37821
37822     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
37823     Signed-off-by: Andy Fleming <afleming@freescale.com>
37824
37825 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
37826 Author: Haiying Wang <Haiying.Wang@freescale.com>
37827 Date:   Tue Jun 19 14:18:34 2007 -0400
37828
37829     Add PCI support for MPC8568MDS board
37830
37831     This patch is against u-boot-mpc85xx.git of www.denx.com
37832
37833     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
37834     Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
37835
37836 commit d111d6382c99fdea08c2312eeeae8786945e189a
37837 Author: Haiying Wang <Haiying.Wang@freescale.com>
37838 Date:   Tue Jun 19 14:18:32 2007 -0400
37839
37840     Empirically set cpo and clk_adjust for mpc85xx DDR2 support
37841
37842     This patch is against u-boot-mpc85xx.git of www.denx.com
37843
37844     Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
37845     both MPC8548CDS board and MPC8568MDS board, especially for supporting
37846     533MHz DDR2.
37847
37848     Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
37849     DDR2 on all current board versions especially ver 1.92 or later to bring
37850     up.
37851
37852     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
37853
37854 commit 3db0bef59eab1155801618cef5c481e97553b597
37855 Author: Kumar Gala <galak@kernel.crashing.org>
37856 Date:   Tue Aug 7 18:07:27 2007 -0500
37857
37858     Use an absolute address when jumping out of 4k boot page
37859
37860     On e500 when we leave the 4k boot page we should use an absolute address since
37861     we don't know where the board code may want us to be really running at.
37862
37863     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37864
37865 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
37866 Author: Andy Fleming <afleming@freescale.com>
37867 Date:   Mon Aug 13 14:49:59 2007 -0500
37868
37869     MPC85xx BA bits not set for 3-bit bank address DIMM
37870
37871     The current implementation does not set the number of bank address bits
37872     (BA) in the processor. The default assumes 2 logical bank bits. This
37873     works fine for a DIMM that uses devices with 4 internal banks (SPD
37874     byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
37875     devices with 8 internal banks (SPD byte17 = 0x8).
37876
37877     Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
37878
37879 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
37880 Author: Andy Fleming <afleming@freescale.com>
37881 Date:   Mon Aug 13 14:38:06 2007 -0500
37882
37883     Fix minor 85xx warnings
37884
37885     Some patches had inserted warnings into the build:
37886     * mpc8560ads declared data without using it
37887     * cpu_init declared ecm and immap without using it in all CONFIGs
37888     * MPC8548CDS.h had its default filenames changed so that they contained
37889       "\m" in the paths.  Made the defaults not Windows-specific (or
37890       anything-specific)
37891
37892     Signed-off-by: Andy Fleming <afleming@freescale.com>
37893
37894 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
37895 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37896 Date:   Fri Jul 27 01:50:52 2007 -0500
37897
37898     8548cds PCIE support.
37899
37900     Make the early L1 cache stack region guarded to prevent speculative
37901     fetches outside the locked range.
37902
37903     Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
37904     init.S whitespace cleanup.
37905
37906     Allow TEXT_BASE value to be specified on command line.  This allows it
37907     to be set to 0xfffc0000 which cuts the uboot binary in half.
37908
37909     Clear and enable lbc and ecm errors.
37910
37911     Update last_busno in device-tree for pci and pcie.
37912
37913     Remove load of obsolete cpu/mpc85xx/pci.0
37914
37915     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37916     Acked-by: Andy Fleming <afleming@freescale.com>
37917
37918 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
37919 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37920 Date:   Fri Jul 27 01:50:51 2007 -0500
37921
37922     8544ds PCIE support
37923
37924     PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
37925
37926     Enable LBC and ECM errors and clear error registers.
37927
37928     Add tftpflash env var to get uboot from tftp server and flash it.
37929
37930     Add pci/pcie convenience env vars to display register space:
37931       "run pcie3regs" to see all pcie3 ccsr registers
37932       "run pcie3cfg" to see all cfg registers
37933     Whitespace cleanup and MPC8544DS.h
37934
37935     Enable CONFIG_INTERRUPTS.
37936
37937     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37938     Acked-by: Andy Fleming <afleming@freescale.com>
37939
37940 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
37941 Author: Andy Fleming <afleming@freescale.com>
37942 Date:   Tue Aug 14 01:34:21 2007 -0500
37943
37944     85xx start.S cleanup and exception support
37945
37946     From: Ed Swarthout <Ed.Swarthout@freescale.com>
37947
37948     Support external interrupts from platform to eliminate system hangs.
37949     Define CONFIG_INTERRUPTS board configure option to enable.
37950     Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
37951
37952     Remove extra cpu initialization redundant with hardware initialization.
37953     Whitespace cleanup.
37954
37955     Define and use _START_OFFSET consistent with other processors using
37956     ppc_asm.tmpl
37957
37958     Move additional code from .text to boot page to make room for
37959     exception vectors at start of image.
37960
37961     Handle Machine Check, External and Critical exceptions.
37962
37963     Fix e500 machine check error determination in traps.c
37964
37965     TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
37966
37967     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37968     Acked-by: Andy Fleming <afleming@freescale.com>
37969
37970 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
37971 Author: Andy Fleming <afleming@freescale.com>
37972 Date:   Tue Aug 14 01:33:18 2007 -0500
37973
37974     Add MPC8544DS README
37975
37976     Signed-off-by: Andy Fleming <afleming@freescale.com>
37977
37978 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
37979 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37980 Date:   Fri Jul 27 01:50:48 2007 -0500
37981
37982     85xx allow debugger to configure ddr.
37983
37984     Only check for mpc8548 rev 1 when compiled for 8548.
37985
37986     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37987     Acked-by: Andy Fleming <afleming@freescale.com>
37988
37989 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
37990 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37991 Date:   Fri Jul 27 01:50:47 2007 -0500
37992
37993     mpc85xx L2 cache reporting and SRAM relocation option.
37994
37995     Allow debugger to override flash cs0/cs1 settings to enable alternate
37996     boot regions
37997
37998     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37999     Acked-by: Andy Fleming <afleming@freescale.com>
38000
38001 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
38002 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
38003 Date:   Fri Jul 27 01:50:46 2007 -0500
38004
38005     e500 needs ppc_asm.tmp MCK_EXCEPTION
38006
38007     Always define MCK_EXCEPTION macro - so e500 can use it too.
38008
38009     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38010     Acked-by: Andy Fleming <afleming@freescale.com>
38011
38012 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
38013 Author: David Updegraff <dave@cray.com>
38014 Date:   Mon Jun 11 10:41:07 2007 -0500
38015
38016     multicast tftp: RFC2090
38017
38018     Implemented IETF RFC2090, Multicast TFTP.  Initial implementation
38019     on Realtek RTL8139 and Freescale TSEC.
38020
38021     Signed-off-by: David Updegraff <dave@cray.com>
38022     Signed-off-by: Ben Warren <bwarren@qstreams.com>
38023
38024 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
38025 Author: Wilson Callan <wcallan@savantav.com>
38026 Date:   Sat Jul 28 10:56:13 2007 -0400
38027
38028     New CONFIG_BOOTP_SERVERIP option
38029
38030     Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
38031     from the bootp server
38032
38033     Signed-off-by: Wilson Callan <wcallan@savantav.com>
38034     Signed-off-by: Ben Warren <bwarren@qstreams.com>
38035
38036 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
38037 Author: Mike Rapoport <mike@compulab.co.il>
38038 Date:   Sun Aug 12 08:48:27 2007 +0300
38039
38040     Add ability to take MAC address from the environment to DM9000 driver
38041
38042     Signed-off-by: Mike Rapoport <mike@compulab.co.il>
38043     Signed-off-by: Ben Warren <bwarren@qstreams.com>
38044
38045 commit be5d72d10d47609326226225181e301fb9a33b58
38046 Author: Wolfgang Denk <wd@denx.de>
38047 Date:   Mon Aug 13 21:57:53 2007 +0200
38048
38049     Minor coding style cleanup. Update CHANGELOG.
38050
38051     Signed-off-by: Wolfgang Denk <wd@denx.de>
38052
38053 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
38054 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
38055 Date:   Sat Aug 11 06:54:58 2007 -0500
38056
38057     Modify SBC8641D to use new Freescale PCI routines
38058
38059     PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
38060     adapter.
38061
38062     Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
38063     Signde-off-by: Jon Loeliger <jdl@freescale.com>
38064
38065 commit a08458303e7f9db67f296980036d3292c35cb45c
38066 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38067 Date:   Fri Jun 29 18:38:51 2007 +0200
38068
38069     atmel_mci: Fix data timeout value
38070
38071     Calculate the data timeout based on values from the CSD instead of
38072     just using a hardcoded DTOR value. This is a backport of a similar fix
38073     in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
38074     instead of down.
38075
38076     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38077
38078 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
38079 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38080 Date:   Mon Aug 13 17:22:31 2007 +0200
38081
38082     AVR32: Include <div64.h> instead of <asm/div64.h>
38083
38084     include/asm-avr32/div64.h was recently moved to include/div64.h, but
38085     cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
38086     the patch was merged perhaps?)
38087
38088     This patch updates cpu/at32ap/interrupts.c so that the avr32 port
38089     compiles again.
38090
38091     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38092
38093 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
38094 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38095 Date:   Wed Jun 27 13:34:26 2007 +0200
38096
38097     atmel_mci: Use 512 byte blocksize if possible
38098
38099     Instead of always using the largest blocksize the card supports, check
38100     if it can support smaller block sizes and use 512 bytes if possible.
38101     Most cards do support this, and other parts of u-boot seem to have
38102     trouble with block sizes different from 512 bytes.
38103
38104     Also enable underrun/overrun protection.
38105
38106     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38107     Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
38108
38109 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
38110 Author: Stefan Roese <sr@denx.de>
38111 Date:   Mon Aug 13 09:05:33 2007 +0200
38112
38113     ppc4xx: Fix problem in PLL clock calculation
38114
38115     This patch was originall provided by David Mitchell <dmitchell@amcc.com>
38116     and fixes a bug in the PLL clock calculation.
38117
38118     Signed-off-by: Stefan Roese <sr@denx.de>
38119
38120 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
38121 Author: Wolfgang Denk <wd@denx.de>
38122 Date:   Sun Aug 12 21:34:50 2007 +0200
38123
38124     Update CHANGELOG
38125
38126 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
38127 Author: Wolfgang Denk <wd@denx.de>
38128 Date:   Sun Aug 12 21:34:34 2007 +0200
38129
38130     Minor alignment of output, 2nd try.
38131     Also update CHANGELOG
38132
38133     Signed-off-by: Wolfgang Denk <wd@denx.de>
38134
38135 commit 6b309f22a724fad8418e811751a0741b893419cf
38136 Author: Wolfgang Denk <wd@denx.de>
38137 Date:   Sun Aug 12 20:35:49 2007 +0200
38138
38139     Minor alignment of output
38140
38141     Signed-off-by: Wolfgang Denk <wd@denx.de>
38142
38143 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
38144 Author: Wolfgang Denk <wd@denx.de>
38145 Date:   Sun Aug 12 18:28:18 2007 +0200
38146
38147     Cleanup output on ADS5121 board
38148
38149     Signed-off-by: Wolfgang Denk
38150
38151 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
38152 Author: Wolfgang Denk <wd@denx.de>
38153 Date:   Sun Aug 12 15:11:38 2007 +0200
38154
38155     Adapt board configuration and fix kernel crash on MCC200 board.
38156
38157     The update procedure was modified to turn off the USB subsystem
38158     before exit for MCC200 and TRAB. This is necessary as otherwise the
38159     USB controller continues to write periodically to system memory!
38160
38161     MCC200-specific notes:
38162     - the patch disables the magic key check for MCC200
38163     - the patch contains the configuration changes made
38164       for the new revision of the board.
38165
38166     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
38167     Signed-off-by: Wolfgang Denk <wd@denx.de>
38168
38169 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
38170 Author: Wolfgang Denk <wd@denx.de>
38171 Date:   Sun Aug 12 14:47:54 2007 +0200
38172
38173     Adjust default configuration of ADS5121 board.
38174
38175     Signed-off-by: Wolfgang Denk <wd@denx.de>
38176
38177 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
38178 Author: Wolfgang Denk <wd@denx.de>
38179 Date:   Sun Aug 12 14:27:39 2007 +0200
38180
38181     Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
38182
38183     Signed-off-by: Wolfgang Denk <wd@denx.de>
38184
38185 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
38186 Author: Gerald Van Baren <vanbaren@cideas.com>
38187 Date:   Tue Aug 7 21:14:22 2007 -0400
38188
38189     Improve error print messages.
38190
38191     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38192
38193 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
38194 Author: Kim Phillips <kim.phillips@freescale.com>
38195 Date:   Tue Jul 17 13:57:04 2007 -0500
38196
38197     fdt: allow for builds that don't want env and bd_t nodes
38198
38199     protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
38200     area.
38201
38202     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38203
38204 commit 91148bf7aeba142d6f348805db7625db7da64d6f
38205 Author: Kim Phillips <kim.phillips@freescale.com>
38206 Date:   Tue Jul 17 13:56:53 2007 -0500
38207
38208     fdt: do board setup based on fdt address specified on bootm line
38209
38210     The last fdt patch to bootm did board setup based on the address
38211     specified by a prior fdt address command invocation.  The bootm
38212     code, as its call to fdt_chosen does, should use the fdt specified
38213     by the user on the bootm command.  Note this restores full
38214     functionality for the 8360's existing default boot environment
38215     values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
38216     before booting a kernel).
38217
38218     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38219
38220 commit e125a2ffc209dd34794e326c7175658253beadf3
38221 Author: Gerald Van Baren <vanbaren@cideas.com>
38222 Date:   Tue Jul 10 20:40:39 2007 -0400
38223
38224     Call ft_board_setup() from the bootm command.
38225
38226     In the patch titled "Create new fdt boardsetup command..." I removed the
38227     call to ft_board_setup() from the routine fdt_chosen(), but I forgot
38228     to add a direct call back into cmd_bootm.c
38229
38230     This fixes the oversight by adding the direct call to the bootm command.
38231
38232     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38233
38234 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
38235 Author: Gerald Van Baren <vanbaren@cideas.com>
38236 Date:   Mon Jun 25 23:25:28 2007 -0400
38237
38238     Create new fdt boardsetup command, fix bug parsing [] form of set values.
38239
38240     Previously ft_board_setup() was called by fdt_chosen() which was not
38241     really correctly structured.  This splits ft_board_setup() out by creating
38242     a new fdt boardsetup command.
38243
38244     Fix a bug when parsing fdt set command values which have the square
38245     bracket form [00 11 22 33] - the length was updated incorrectly in when
38246     parsing that form.
38247
38248     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38249
38250 commit 6f35ded9e85493595e0eb66a82b502a95326d049
38251 Author: Gerald Van Baren <vanbaren@cideas.com>
38252 Date:   Mon Jun 25 20:55:58 2007 -0400
38253
38254     Tighten up the error messages.
38255
38256     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38257
38258 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
38259 Author: Gerald Van Baren <vanbaren@cideas.com>
38260 Date:   Mon Jun 25 19:52:23 2007 -0400
38261
38262     Asthetic improvements: error messages and line lengths.
38263
38264     Tighten up the error messages, split overlength lines.
38265
38266     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38267
38268 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
38269 Author: Gerald Van Baren <vanbaren@cideas.com>
38270 Date:   Fri May 25 22:08:57 2007 -0400
38271
38272     Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
38273
38274     The fdt_chosen() function was adding/seting some properties ad-hoc
38275       improperly and duplicated (poorly) what was done in ft_board_setup()
38276
38277     Clean up long lines (setting properties, printing errors).
38278
38279     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38280
38281 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
38282 Author: Gerald Van Baren <vanbaren@cideas.com>
38283 Date:   Mon May 21 23:27:16 2007 -0400
38284
38285     For fdt_find_node_by_path(), handle the root path properly.
38286
38287     Also removes the special case root path detection in cmd_fdt.c since it
38288     is no longer necessary.
38289
38290     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38291
38292 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
38293 Author: Gerald Van Baren <vanbaren@cideas.com>
38294 Date:   Thu May 17 23:54:36 2007 -0400
38295
38296     Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
38297
38298     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
38299     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
38300
38301 commit 1a861169bc3758f9de3aead62b058736c6891246
38302 Author: Gerald Van Baren <vanbaren@cideas.com>
38303 Date:   Wed Jun 6 22:47:58 2007 -0400
38304
38305     Replace fdt_node_offset() with fdt_find_node_by_path().
38306
38307     The new name matches more closely the kernel's name, which is also
38308     a much better description.
38309
38310     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
38311     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
38312
38313 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
38314 Author: Gerald Van Baren <vanbaren@cideas.com>
38315 Date:   Wed May 16 22:39:59 2007 -0400
38316
38317     Fix cmd_fdt line lengths, refactor code.
38318
38319     Break lines that were greater than 80 characters in length.
38320     Move the fdt print and property parsing code to separate static functions
38321       to reduce coding clutter in the fdt_cmd handling body.
38322
38323     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38324
38325 commit 25114033ab21788810c48ba4df103b649da1223b
38326 Author: Gerald Van Baren <vanbaren@cideas.com>
38327 Date:   Sat May 12 09:47:25 2007 -0400
38328
38329     FDT command improvements.
38330
38331     Fix "fdt set" so that it will create a non-existing property.
38332     Add "fdt mknode" to create nodes.
38333
38334     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38335
38336 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
38337 Author: Gerald Van Baren <vanbaren@cideas.com>
38338 Date:   Sat May 12 09:45:46 2007 -0400
38339
38340     Reorganize and fix problems (returns) in the bootm command.
38341
38342     Do *NOT* return after the "point of no return" has been passed.
38343       If something goes wrong, the board must be reset after that point.
38344     Move the "Transferring control to Linux" debug message back to where it
38345       belongs: just before transferring control to linux.
38346
38347     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38348
38349 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
38350 Author: Gerald Van Baren <vanbaren@cideas.com>
38351 Date:   Tue May 8 21:27:35 2007 -0400
38352
38353     Fix bugs in the CONFIG_OF_LIBFDT
38354
38355     Stupid coding mistakes (identified by Timur Tabi, thanks).
38356
38357     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38358
38359 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
38360 Author: Gerald Van Baren <vanbaren@cideas.com>
38361 Date:   Wed Apr 25 22:47:15 2007 -0400
38362
38363     Improve fdt move length handling.
38364
38365     Make the length parameter optional: if not specified, do the move using
38366     the current size unchanged.
38367
38368     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38369
38370 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
38371 Author: Gerald Van Baren <vanbaren@cideas.com>
38372 Date:   Wed Apr 25 22:23:36 2007 -0400
38373
38374     Minor code clean up.
38375
38376     Declare the variable fdt properly as extern.
38377     Call the "set_fn" function pointer the "short way" without the full
38378       dereferencing syntax.
38379
38380     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38381
38382 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
38383 Author: Gerald Van Baren <vanbaren@cideas.com>
38384 Date:   Wed Apr 25 21:24:27 2007 -0400
38385
38386     Improve error messages, more informative.
38387
38388     Print more than the raw libfdt error message strings.  This is especially
38389     useful for cluing in the user when the bootm command aborts due to
38390     blob problems.
38391
38392     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38393
38394 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
38395 Author: Gerald Van Baren <vanbaren@cideas.com>
38396 Date:   Fri Apr 20 22:46:53 2007 -0400
38397
38398     libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
38399
38400     This is the way u-boot reduces configured-out code.  At Wolfgang
38401     Grandegger and Wolfgang Denk's request, make libfdt conform.
38402
38403     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38404
38405 commit 923efd286411ed052d9e074f59f8986d6081061c
38406 Author: Bruce Adler <bruce.adler@ccpu.com>
38407 Date:   Fri Aug 10 14:54:47 2007 -0700
38408
38409     add image size and descriptors for Spartan 3E FPGA chips
38410
38411     Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
38412
38413     Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
38414
38415 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
38416 Author: Kim Phillips <kim.phillips@freescale.com>
38417 Date:   Fri Aug 10 15:34:48 2007 -0500
38418
38419     make MAKEALL more immune to merge conflicts
38420
38421     ..by placing board entries one per line, as suggested by jdl.
38422
38423     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38424
38425 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
38426 Author: Kim Phillips <kim.phillips@freescale.com>
38427 Date:   Fri Aug 10 13:28:25 2007 -0500
38428
38429     README: Remove outdated cpu type, board type, and NAME_config lists
38430
38431     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38432
38433 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
38434 Author: Dave Liu <r63238@freescale.com>
38435 Date:   Fri Aug 10 15:48:59 2007 +0800
38436
38437     mpc83xx: Suppress the warning 'burstlen'
38438
38439     suppress the warning 'burstlen' of spd_sdram.
38440
38441     Signed-off-by: Dave Liu <daveliu@freescale.com>
38442
38443 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
38444 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
38445 Date:   Thu Aug 9 15:11:03 2007 -0500
38446
38447     Add support for SBC8641D. Config files.
38448
38449     Add support for Wind River's SBC8641D reference board.
38450
38451     Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
38452     Acked-by: Wolfgang Denk <wd@denx.de>
38453     Acked-by: Jon Loeliger <jdl@freescale.com>
38454
38455 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
38456 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
38457 Date:   Thu Aug 9 15:10:53 2007 -0500
38458
38459     Add support for SBC8641D.  Board files.
38460
38461     Add support for Wind River's SBC8641D reference board.
38462
38463     Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
38464     Acked-by: Wolfgang Denk <wd@denx.de>
38465     Acked-by: Jon Loeliger <jdl@freescale.com>
38466
38467 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
38468 Author: Stefan Roese <sr@denx.de>
38469 Date:   Fri Aug 10 20:34:58 2007 +0200
38470
38471     Conding style cleanup
38472
38473     Signed-off-by: Stefan Roese <sr@denx.de>
38474
38475 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
38476 Author: Sergey Kubushyn <ksi@koi8.net>
38477 Date:   Fri Aug 10 20:26:18 2007 +0200
38478
38479     [ARM] TI DaVinci support, hopefully final
38480
38481     Add support for the following DaVinci boards:
38482     - DV_EVM
38483     - SCHMOOGIE
38484     - SONATA
38485
38486     Changes:
38487
38488     - Split into separate board directories
38489     - Removed changes to MTD_DEBUG (or whatever it's called)
38490     - New CONFIG_CMD party line followed
38491     - Some cosmetic fixes, cleanup etc.
38492     - Patches against the latest U-Boot tree as of now.
38493     - Fixed CONFIG_CMD_NET in net files.
38494     - Fixed CONFIG_CMD_EEPROM for schmoogie.
38495     - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
38496        DV_EVM. Can't check if it works on SONATA, don't have a board any more,
38497        but it at least compiles.
38498
38499     Here is an excerpt from session log on SCHMOOGIE...
38500
38501     U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)
38502
38503     DRAM:  128 MB
38504     NAND:  128 MiB
38505     In:    serial
38506     Out:   serial
38507     Err:   serial
38508     ARM Clock : 297MHz
38509     DDR Clock : 162MHz
38510     ETH PHY   : DP83848 @ 0x01
38511     U-Boot > iprobe
38512     Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
38513     U-Boot > ping 192.168.253.10
38514     host 192.168.253.10 is alive
38515     U-Boot >
38516
38517     Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
38518     Acked-by: Dirk Behme <dirk.behme@gmail.com>
38519     Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
38520     Acked-by: Stefan Roese <sr@denx.de>
38521
38522 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
38523 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
38524 Date:   Fri Jul 27 01:50:45 2007 -0500
38525
38526     fsl_pci_init cleanup.
38527
38528     Do not enable normal errors created during probe (master abort, perr,
38529     and pcie Invalid Configuration access).
38530
38531     Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
38532
38533     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38534     Acked-by: Andy Fleming <afleming@freescale.com>
38535
38536 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
38537 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
38538 Date:   Fri Jul 27 01:50:44 2007 -0500
38539
38540     pciauto_setup_device bars_num fix
38541
38542     Passing bars_num=0 to pciauto_setup_device should assign no bars.
38543
38544     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38545     Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
38546     Acked-by: Andy Fleming <afleming@freescale.com>
38547
38548 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
38549 Author: Jon Loeliger <jdl@freescale.com>
38550 Date:   Mon Aug 6 17:39:44 2007 -0500
38551
38552     8641hpcn: Do correct sized pointer math.
38553
38554     When I rebased Ed's patch and cleaned up a few compilation
38555     problems, I apparently rebased my brain on crack first.
38556     Fix that by doing (char *) sized pointer math as needed.
38557
38558     Signed-off-by: Jon Loeliger <jdl@freescale.com>
38559
38560 commit cfc7a7f5bb3273c9951173c788001d45118f141f
38561 Author: Jon Loeliger <jdl@freescale.com>
38562 Date:   Thu Aug 2 14:42:20 2007 -0500
38563
38564     cpu/86xx fixes.
38565
38566     Remove rev 1 fixes.
38567     Always set PICGCR_MODE.
38568     Enable machine check and provide board config option
38569     to set and handle SoC error interrupts.
38570
38571     Include MSSSR0 in error message.
38572
38573     Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
38574
38575     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38576     Signed-off-by: Jon Loeliger <jdl@freescale.com>
38577
38578 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
38579 Author: Stefan Roese <sr@denx.de>
38580 Date:   Fri Aug 10 10:42:25 2007 +0200
38581
38582     Coding style cleanup
38583
38584     Signed-off-by: Stefan Roese <sr@denx.de>
38585
38586 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
38587 Author: Dirk Behme <dirk.behme@googlemail.com>
38588 Date:   Thu Aug 2 17:42:08 2007 +0200
38589
38590     Make use of generic 64bit division in nand_util.c
38591
38592     Use generic 64bit division in nand_util.c. This makes nand_util.c
38593     independent of any toolchain 64bit division.
38594
38595     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
38596
38597 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
38598 Author: Dirk Behme <dirk.behme@googlemail.com>
38599 Date:   Thu Aug 2 17:41:14 2007 +0200
38600
38601     Move 64bit division from avr32 to generic lib
38602
38603     Move the 64bit division from lib_avr32 to lib_generic. With this, all
38604     boards can do_div/__div64_32 if needed, not only avr one. Code is put
38605     to lib_generic, so no larger memory footprint if not used. No code
38606     modifications. Thanks for proposal by Håvard Skinnemoen.
38607
38608     Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
38609
38610 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
38611 Author: Niklaus Giger <niklausgiger@gmx.ch>
38612 Date:   Fri Jul 27 11:31:22 2007 +0200
38613
38614     Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
38615
38616     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38617
38618 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
38619 Author: Niklaus Giger <niklausgiger@gmx.ch>
38620 Date:   Fri Jul 27 11:30:33 2007 +0200
38621
38622     Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
38623
38624     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38625
38626 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
38627 Author: Niklaus Giger <niklausgiger@gmx.ch>
38628 Date:   Fri Jul 27 11:38:26 2007 +0200
38629
38630     Add PPC4xx-HCU4 and HCU5 boards: common files
38631
38632     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38633
38634 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
38635 Author: Niklaus Giger <niklausgiger@gmx.ch>
38636 Date:   Fri Jul 27 11:28:44 2007 +0200
38637
38638     Add PPC4xx-HCU4 and HCU5 boards: make related
38639
38640     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38641
38642 commit 137fdd9f474ecb853efdace5200576308c67f18d
38643 Author: Niklaus Giger <niklausgiger@gmx.ch>
38644 Date:   Fri Jul 27 11:28:03 2007 +0200
38645
38646     Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
38647
38648     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38649
38650 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
38651 Author: Niklaus Giger <niklausgiger@gmx.ch>
38652 Date:   Fri Jul 27 11:27:15 2007 +0200
38653
38654     Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
38655
38656     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38657
38658 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
38659 Author: Niklaus Giger <niklausgiger@gmx.ch>
38660 Date:   Fri Jul 27 11:25:31 2007 +0200
38661
38662     Add PPC4xx-HCU4 and HCU5 boards: READMEs
38663
38664     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38665
38666 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
38667 Author: Niklaus Giger <niklausgiger@gmx.ch>
38668 Date:   Fri Jul 27 11:37:40 2007 +0200
38669
38670     Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
38671
38672     This series of patches adds support for 2 boards from Netstal Maschinen.
38673
38674     The HCU4 has a PPC405Gpr and
38675     the HCU5 has a PPC440EPX.
38676
38677     The HCU4 has a somehow complicated flash setup, as the booteprom is
38678     only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
38679     elegant solution.
38680
38681     The HCU5 has only a booteprom as the whole code will be downloaded from a
38682     different board which has HD, CD-ROM, etc and where all code is stored.
38683
38684     This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
38685     Thanks them a lot.
38686
38687     Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
38688
38689 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
38690 Author: Stefan Roese <sr@denx.de>
38691 Date:   Fri Aug 10 08:42:55 2007 +0200
38692
38693     ppc4xx: Update lwmon5 POST configuration
38694
38695     Signed-off-by: Stefan Roese <sr@denx.de>
38696
38697 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
38698 Author: Yuri Tikhonov <yur@emcraft.com>
38699 Date:   Fri Aug 10 08:25:22 2007 +0200
38700
38701     POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
38702
38703     The patch adds support for UART POST on ppc44x-based boards with no
38704     external serial clocks installed.
38705
38706     Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
38707     Acked-by: Stefan Roese <sr@denx.de>
38708
38709 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
38710 Author: Kim Phillips <kim.phillips@freescale.com>
38711 Date:   Mon Aug 6 18:18:34 2007 -0500
38712
38713     mpc83xx: fix ITX[GP] O=builddir builds
38714
38715     make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'.  Stop.
38716
38717     Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
38718     "BUILD_DIR=<some dir> ./MAKEALL ..."
38719
38720     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38721
38722 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
38723 Author: Dave Liu <r63238@freescale.com>
38724 Date:   Wed Aug 1 15:00:59 2007 +0800
38725
38726     mpc83xx: Correct the README for DDR ECC
38727
38728     Update the README for DDR ECC, change the name
38729     to README.mpc83xx.ddrecc.
38730
38731     Signed-off-by: Dave Liu <daveliu@freescale.com>
38732     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38733
38734 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
38735 Author: Dave Liu <r63238@freescale.com>
38736 Date:   Wed Aug 1 15:00:15 2007 +0800
38737
38738     mpc83xx: Consolidate the ECC support of 83xx
38739
38740     Remove the duplicated source code of ecc command on the <board>.c,
38741     for reused, move these code to cpu/mpc83xx directory.
38742
38743     Signed-off-by: Dave Liu <daveliu@freescale.com>
38744     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38745
38746 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
38747 Author: Dave Liu <r63238@freescale.com>
38748 Date:   Sat Aug 4 13:37:39 2007 +0800
38749
38750     mpc83xx: Correct the burst length for DDR2 with 32 bits
38751
38752     The burst length should be 4 for DDR2 with 32 bits bus
38753
38754     Signed-off-by: Dave Liu <daveliu@freescale.com>
38755
38756 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
38757 Author: Kim Phillips <kim.phillips@freescale.com>
38758 Date:   Wed Jul 25 19:25:33 2007 -0500
38759
38760     mpc83xx: add support for the MPC8323E RDB
38761
38762     MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
38763     five 10/100 ethernet ports connected via an ICPlus IP175C
38764     switch, one PCI slot, and serial.  Features not supported
38765     in this patch are SD card interface, 2 USB ports, and the
38766     two phone ports.
38767
38768     Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
38769     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38770
38771 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
38772 Author: Kim Phillips <kim.phillips@freescale.com>
38773 Date:   Wed Jul 25 19:25:28 2007 -0500
38774
38775     mpc83xx: fixup generic pci for libfdt
38776
38777     add libfdt support to the generic 83xx pci code
38778
38779     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38780
38781 commit f57ac7a7b37109245b69db80839ebee26179966a
38782 Author: Kim Phillips <kim.phillips@freescale.com>
38783 Date:   Wed Jul 25 19:25:22 2007 -0500
38784
38785     mpc83xx: fix 8360 and cpu functions to update fdt being passed
38786
38787     ..and not the global fdt. Rename local fdt vars to blob so as not to
38788     be confused with the global var with the same three-letter name.
38789
38790     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38791
38792 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
38793 Author: Jerry Van Baren <gvb.uboot@gmail.com>
38794 Date:   Wed Jul 4 21:34:24 2007 -0400
38795
38796     mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
38797
38798     Several node strings were not correct (trailing slashes and properties
38799       in the strings)
38800     Added setting of the timebase-frequency.
38801     Improved error messages and use debug() instead of printf().
38802
38803     Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
38804     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38805
38806 commit 26d02c9bbac1751c5e19294f000100b48d43a920
38807 Author: Jerry Van Baren <gvb.uboot@gmail.com>
38808 Date:   Wed Jul 4 21:27:30 2007 -0400
38809
38810     mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
38811
38812     The new name matches more closely the kernel's name, which is also
38813     a much better description.
38814
38815     These are the mpc83xx changes made necessary by the function name change.
38816
38817     Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
38818     Acked-by: Gerald Van Baren <vanbaren@cideas.com>
38819     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38820
38821 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
38822 Author: Dave Liu <daveliu@freescale.com>
38823 Date:   Mon Jun 25 10:41:56 2007 +0800
38824
38825     mpc83xx: Add support for the display of reset status
38826
38827     83xx processor family has many reset sources, such as
38828     power on reset, software hard reset, software soft reset,
38829     JTAG, bus monitor, software watchdog, check stop reset,
38830     external hard reset, external software reset.
38831     sometimes, to figure out the fault of system, we need to
38832     know the cause of reset early before the prompt of
38833     u-boot present.
38834
38835     Signed-off-by: Dave Liu <daveliu@freescale.com>
38836     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38837
38838 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
38839 Author: Dave Liu <daveliu@freescale.com>
38840 Date:   Mon Jun 25 10:41:04 2007 +0800
38841
38842     mpc83xx: Fix the align bug of SDMA buffer
38843
38844     According to the latest user manual, the SDMA temporary
38845     buffer base address must be 4KB aligned.
38846
38847     Signed-off-by: Dave Liu <daveliu@freescale.com>
38848     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38849
38850 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
38851 Author: Dave Liu <daveliu@freescale.com>
38852 Date:   Mon Jun 25 13:21:12 2007 +0800
38853
38854     mpc83xx: Revise the MPC8360EMDS readme doc
38855
38856     When the rev2.x silicon mount on the MPC8360EMDS baord,
38857     and if you are using the u-boot version after the commit
38858     3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
38859     to make the ethernet interface usable, we have to setup
38860     the jumpers correctly.
38861
38862     Signed-off-by: Dave Liu <daveliu@freescale.com>
38863     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38864
38865 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
38866 Author: Timur Tabi <timur@freescale.com>
38867 Date:   Tue Jul 3 13:46:32 2007 -0500
38868
38869     FSL I2C driver programs the two I2C busses differently
38870
38871     The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
38872     The second I2C bus has its slave address programmed incorrectly and is
38873     missing a 5-us delay.
38874
38875     Signed-off-by: Timur Tabi <timur@freescale.com>
38876     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38877
38878 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
38879 Author: Timur Tabi <timur@freescale.com>
38880 Date:   Tue Jul 3 13:04:34 2007 -0500
38881
38882     Update SCCR programming in cpu_init_f() to support all 83xx processors
38883
38884     Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
38885     bitfields for all 83xx processors.  The code to update some bitfields was
38886     compiled only on some processors.  Now, the bitfields are programmed as long
38887     as the corresponding CFG_SCCR option is defined in the board header file.
38888     This means that the board header file should not define any CFG_SCCR macros
38889     for bitfields that don't exist on that processor, otherwise the SCCR will be
38890     programmed incorrectly.
38891
38892     Signed-off-by: Timur Tabi <timur@freescale.com>
38893     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38894
38895 commit 9546266999f0b9b51372636614211b88d90f0f25
38896 Author: Martin Krause <martin.krause@tqs.de>
38897 Date:   Fri Jun 22 13:04:22 2007 +0200
38898
38899     TQM834x: cleanup configuraton
38900
38901     Remove irritating #undef DEBUG
38902
38903     Signed-off-by: Martin Krause <martin.krause@tqs.de>
38904     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38905
38906 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
38907 Author: david.saada <David.Saada@ecitele.com>
38908 Date:   Mon Jun 18 09:09:53 2007 -0700
38909
38910     MPC83xx: Fix makefile to generate config.h file in the build directory
38911
38912     MPC83xx: Fix the Makefile config sections to generate the include/config.h
38913     file in the build directory instead of the source directory.
38914
38915     Signed-off-by: David Saada <david.saada@ecitele.com>
38916     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38917
38918 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
38919 Author: Lee Nipper <Lee.Nipper@freescale.com>
38920 Date:   Thu Jun 14 20:07:33 2007 -0500
38921
38922     mpc83xx: Add support for 8360 silicon revision 2.1
38923
38924     This change adds 8360 silicon revision 2.1 support to u-boot.
38925
38926     Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
38927     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38928
38929 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
38930 Author: Kumar Gala <galak@kernel.crashing.org>
38931 Date:   Wed Aug 8 04:14:28 2007 -0500
38932
38933     Treat ppc64 host as ppc
38934
38935     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38936
38937 commit 0dc4279b08ff82472bec2e2c90858602459febe8
38938 Author: Jason Jin <Jason.jin@freescale.com>
38939 Date:   Wed Aug 8 09:01:46 2007 +0800
38940
38941     Minor fix for bios emulator makefile
38942
38943     Add $(obj) to LIB avoiding objects be built in the source dir
38944
38945     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
38946
38947 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
38948 Author: Jason Jin <Jason.jin@freescale.com>
38949 Date:   Wed Aug 8 08:33:11 2007 +0800
38950
38951     Add CONFIG_BIOSEMU define to guard all the bios emulator code
38952
38953     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
38954
38955     This patch fix the compile issue on the board that did not enable the bios emulator
38956
38957 commit ed8106433522f2ea8933e9808346860d061d7731
38958 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
38959 Date:   Tue Jul 31 12:27:25 2007 -0500
38960
38961     tsec: fix multiple PHY support
38962
38963     The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
38964     broke multiple PHY support in tsec.c.  This fixes it.
38965
38966     Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
38967     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38968
38969 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
38970 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
38971 Date:   Thu Aug 9 09:08:18 2007 -0500
38972
38973     tsec: Allow Ten Bit Interface address to be configurable
38974
38975     Allow the address of the Ten Bit Interface (TBI) to be changed in the
38976     event of a conflict with another device.
38977
38978     Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
38979
38980 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
38981 Author: Stefan Roese <sr@denx.de>
38982 Date:   Wed Aug 8 09:54:26 2007 +0200
38983
38984     Coding style cleanup
38985
38986     Signed-off-by: Stefan Roese <sr@denx.de>
38987
38988 commit a41de1f0d373e09c782dea558385a06247111ba5
38989 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
38990 Date:   Sun Aug 5 05:15:18 2007 -0500
38991
38992     Port enabled for I2C signals and chipselects port configuration.
38993
38994     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
38995
38996 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
38997 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
38998 Date:   Sun Aug 5 04:31:18 2007 -0500
38999
39000     Added NAND support
39001
39002     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39003
39004 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
39005 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39006 Date:   Sun Aug 5 04:11:20 2007 -0500
39007
39008     Added I2C support
39009
39010     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39011
39012 commit 99c03c175d2689093176facf17c58ce2cb320001
39013 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39014 Date:   Sun Aug 5 03:58:52 2007 -0500
39015
39016     Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
39017
39018     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39019
39020 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
39021 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39022 Date:   Sun Aug 5 03:55:21 2007 -0500
39023
39024     Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
39025
39026     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39027
39028 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
39029 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39030 Date:   Sun Aug 5 03:43:30 2007 -0500
39031
39032     Moved sync() from board file to include/asm-m68k/io.h
39033
39034     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39035
39036 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
39037 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39038 Date:   Sun Aug 5 03:30:44 2007 -0500
39039
39040     Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
39041
39042     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39043
39044 commit 9998bd37ead85e93953559720710d3b0685c81e6
39045 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39046 Date:   Sun Aug 5 03:19:10 2007 -0500
39047
39048     Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
39049
39050     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39051
39052 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
39053 Author: Jason Jin <Jason.jin@freescale.com>
39054 Date:   Tue Aug 7 16:17:06 2007 +0800
39055
39056     Add CONFIG_BIOSEMU define to guard all the bios emulator code
39057
39058     This patch fix the compile issue on the board that did not enable the bios emulator
39059
39060 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
39061 Author: Wolfgang Denk <wd@denx.de>
39062 Date:   Tue Aug 7 16:02:13 2007 +0200
39063
39064     Fix missing brace error in fs/fat/fat.c
39065     [pointed out by Roderik Wildenburg]
39066
39067     Signed-off-by: Wolfgang Denk <wd@denx.de>
39068
39069 commit 706714d97a0d08d59eda4de2268c39f504688329
39070 Author: Michal Simek <monstr@monstr.eu>
39071 Date:   Mon Aug 6 23:41:53 2007 +0200
39072
39073     [FIX] remove cute code
39074
39075 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
39076 Author: Michal Simek <monstr@monstr.eu>
39077 Date:   Mon Aug 6 23:35:26 2007 +0200
39078
39079     [FIX] Fix romfs code
39080
39081 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
39082 Author: Michal Simek <monstr@monstr.eu>
39083 Date:   Mon Aug 6 23:31:49 2007 +0200
39084
39085     [FIX] Coding style cleanup - Wolfgang's suggestions
39086
39087 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
39088 Author: Wolfgang Denk <wd@denx.de>
39089 Date:   Mon Aug 6 23:21:05 2007 +0200
39090
39091     Fixed typo in README (pointed out by Martin Jost).
39092
39093     Signed-off-by: Wolfgang Denk <wd@denx.de>
39094
39095 commit 537223afa61f64480df31ce440a9cb386df4a814
39096 Author: Stefan Roese <sr@denx.de>
39097 Date:   Mon Aug 6 21:10:17 2007 +0200
39098
39099     ppc4xx: Update AMCC Bamboo README doc/README.bamboo
39100
39101     As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
39102     here an updated Bamboo README.
39103
39104     Signed-off-by: Stefan Roese <sr@denx.de>
39105
39106 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
39107 Author: Wolfgang Denk <wd@denx.de>
39108 Date:   Mon Aug 6 02:17:36 2007 +0200
39109
39110     Coding style cleanup. Update CHANGELOG.
39111
39112     Signed-off-by: Wolfgang Denk <wd@denx.de>
39113
39114 commit 221838cc7eb178370ff62aa05920a582e12ac322
39115 Author: Jason Jin <Jason.jin@freescale.com>
39116 Date:   Tue Jul 10 09:03:22 2007 +0800
39117
39118     Remove the bios emulator from MAI board.
39119
39120     The bios emulator in the MAI board can not pass compile
39121     and have a lot of crap in it. remove it and will have a
39122     clean and small bios emulator in the drivers directory
39123     which can be uesed for every board.
39124
39125     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
39126
39127 commit 5618332409bb96f4448d1712899369fc80c0b489
39128 Author: Jason Jin <Jason.jin@freescale.com>
39129 Date:   Fri Jul 13 12:14:59 2007 +0800
39130
39131     Fix some compile issues for MAI board.
39132
39133     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
39134
39135 commit 0f460a1ee148b648ee242c3157650287d4296260
39136 Author: Jason Jin <Jason.jin@freescale.com>
39137 Date:   Fri Jul 13 12:14:58 2007 +0800
39138
39139     Configurations for ATI video card BIOS emulator
39140
39141     This patch add definition of the BIOS emulator and the ATI framebuffer
39142     driver for MPC8641HPCN board.
39143
39144     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
39145     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
39146
39147 commit ece92f85053b8df613edcf05b26a416cbc3d629c
39148 Author: Jason Jin <Jason.jin@freescale.com>
39149 Date:   Fri Jul 6 08:34:56 2007 +0800
39150
39151     This is a BIOS emulator, porting from SciTech for u-boot, mainly for
39152     ATI video card BIOS. and can be used for x86 code emulation by some
39153     modifications.
39154
39155     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
39156
39157 commit 5072188acabde3178fac7f5a597150e6e74fd40c
39158 Author: Jason Jin <Jason.jin@freescale.com>
39159 Date:   Fri Jul 6 08:33:33 2007 +0800
39160
39161     This is a framebuffer driver for ATI video card, can work for PCI9200,
39162     X300, X700, X800 ATI video cards.
39163
39164     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
39165     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
39166
39167 commit 5728be389e65fd47f34b33c2596271eb4db751ae
39168 Author: Wolfgang Denk <wd@denx.de>
39169 Date:   Mon Aug 6 01:01:49 2007 +0200
39170
39171     Coding style cleanup. Update CHANGELOG.
39172
39173     Signed-off-by: Wolfgang Denk <wd@denx.de>
39174
39175 commit 8092fef4c29b395958bb649647da7e3775731517
39176 Author: Martin Krause <Martin.Krause@tqs.de>
39177 Date:   Tue Dec 12 14:26:01 2006 +0100
39178
39179     Add functions to list of exported functions
39180
39181     Additionally export the following fuctions (to make trab_config build again):
39182     - simple_strtol()
39183     - strcmp()
39184
39185     Also bump the ABI version to reflect this change
39186
39187     Signed-off-by: Martin Krause <martin.krause@tqs.de>
39188
39189 commit 63cec5814fab5d2b1c86982327433807a5ac0249
39190 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39191 Date:   Thu Aug 2 14:09:49 2007 -0500
39192
39193     Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
39194
39195     All of the PCI/PCI-Express driver and initialization code that
39196     was in the MPC8641HPCN port has now been moved into the common
39197     drivers/fsl_pci_init.c.  In a subsequent patch, this will be
39198     utilized by the 85xx ports as well.
39199
39200     Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
39201
39202     Also enable the second PCI-Express controller on 8641
39203     by getting its BATS and CFG_ setup right.
39204
39205     Fixed a u16 vendor compiler warning in AHCI driver too.
39206
39207     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39208     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
39209     Signed-off-by: Jon Loeliger <jdl@freescale.com>
39210
39211 commit a274ca4f6d68830e7c916f897561cff8c4101c38
39212 Author: Michal Simek <monstr@monstr.eu>
39213 Date:   Sun Aug 5 22:33:05 2007 +0200
39214
39215     [FIX] Coding style cleanup
39216
39217 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
39218 Author: Michal Simek <monstr@monstr.eu>
39219 Date:   Sun Aug 5 16:13:31 2007 +0200
39220
39221     [FIX] Xilinx Uartlite driver
39222     Because PPC405 can use UARTLITE serial interface and
39223     Microblaze can use Uart16550 serial interface not only Uartlite.
39224
39225 commit 98889edd50aadf862071eb5664747ad0d568a20e
39226 Author: Michal Simek <monstr@monstr.eu>
39227 Date:   Sun Aug 5 15:54:53 2007 +0200
39228
39229     [FIX] Change configuration for XUPV2P Microblaze board
39230
39231 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
39232 Author: Michal Simek <monstr@monstr.eu>
39233 Date:   Sun Aug 5 15:53:50 2007 +0200
39234
39235     [PATCH] Added support for Xilinx Emac community driver
39236
39237 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
39238 Author: Bartlomiej Sieka <tur@semihalf.com>
39239 Date:   Fri Aug 3 12:08:16 2007 +0200
39240
39241     cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
39242
39243     Add the ability for modules from the Schindler cm5200 family to use a
39244     single U-Boot image:
39245     - rename cm1_qp1 to cm5200
39246     - add run-time module detection
39247     - parametrize SDRAM configuration according to the module we are running on
39248
39249     Few minor, board-specific fixes included in this patch:
39250     - better MAC address handling
39251     - updated default environment ('update' command uses +{filesize} now)
39252     - improved error messages in the auto-update code
39253     - allow booting U-Boot from RAM (CFG_RAMBOOT)
39254
39255     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
39256     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
39257     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
39258
39259 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
39260 Author: Andy Fleming <afleming@freescale.com>
39261 Date:   Fri Aug 3 04:05:25 2007 -0500
39262
39263     Add Marvell 1149 PHY support to the TSEC
39264
39265 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
39266 Author: Wolfgang Denk <wd@denx.de>
39267 Date:   Thu Aug 2 21:27:46 2007 +0200
39268
39269     Coding style cleanup, update CHANGELOG
39270
39271     Signed-off-by: Wolfgang Denk <wd@denx.de>
39272
39273 commit 63e22764d2f8653f68888c667eb65b3996b52680
39274 Author: Wolfgang Denk <wd@denx.de>
39275 Date:   Thu Aug 2 10:11:18 2007 +0200
39276
39277     Minor cleanup of <board>_nand build rules.
39278
39279 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
39280 Author: Stefan Roese <sr@denx.de>
39281 Date:   Thu Aug 2 08:33:56 2007 +0200
39282
39283     ppc4xx: Code cleanup
39284
39285     Signed-off-by: Stefan Roese <sr@denx.de>
39286
39287 commit c92409812206ac67a7fa7aae298539a9c3804a46
39288 Author: Grzegorz Bernacki <gjb@semihalf.com>
39289 Date:   Tue Jul 31 18:51:48 2007 +0200
39290
39291     [ppc440SPe] Graceful recovery from machine check during PCIe configuration
39292
39293     During config transactions on the PCIe bus an attempt to scan for a
39294     non-existent device can lead to a machine check exception with certain
39295     peripheral devices. In order to avoid crashing in such scenarios the
39296     instrumented versions of the config cycle read routines are introduced, so
39297     the exceptions fixups framework can gracefully recover.
39298
39299     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
39300     Acked-by: Rafal Jaworowski <raj@semihalf.com>
39301
39302 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
39303 Author: Rafal Jaworowski <raj@semihalf.com>
39304 Date:   Tue Jul 31 18:19:54 2007 +0200
39305
39306     [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
39307
39308     This brings back separate settings for PCIe bus numbers depending on chip
39309     revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
39310     commit. 440SPe rev. A does NOT work properly with the same settings as for
39311     the rev. B (no devices are seen on the bus during enumeration).
39312
39313     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
39314
39315 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
39316 Author: Wolfgang Denk <wd@denx.de>
39317 Date:   Thu Aug 2 00:48:45 2007 +0200
39318
39319     Fix build errors and warnings / code cleanup.
39320
39321     Signed-off-by: Wolfgang Denk <wd@denx.de>
39322
39323 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
39324 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
39325 Date:   Tue Jul 31 10:24:56 2007 +0200
39326
39327     ppc4xx: Update AMCC Bamboo 440EP support
39328
39329     Changed storage type of cfg_simulate_spd_eeprom to const
39330     Changed storage type of gpio_tab to stack storage
39331     (Cannot access global data declarations in .bss until afer code relocation)
39332
39333     Improved SDRAM tests to catch problems where data is not uniquely addressable
39334     (e.g. incorrectly programmed SDRAM row or columns)
39335
39336     Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
39337     Fixed AM29LV320DT (OpCode Flash) sector map
39338
39339     Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
39340     Signed-off-by: Stefan Roese <sr@denx.de>
39341
39342 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
39343 Author: Stefan Roese <sr@denx.de>
39344 Date:   Tue Jul 31 08:37:01 2007 +0200
39345
39346     ppc4xx: Update 440EPx lwmon5 board support
39347
39348     - Clear ECC status regs after ECC POST test
39349     - Set dcbz for ECC generation with caches enabled as default
39350     - Code cleanup
39351
39352     Signed-off-by: Stefan Roese <sr@denx.de>
39353
39354 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
39355 Author: Stefan Roese <sr@denx.de>
39356 Date:   Mon Jul 30 11:04:57 2007 +0200
39357
39358     ppc4xx: Only print ECC related info when the error bis are set
39359
39360     Signed-off-by: Stefan Roese <sr@denx.de>
39361
39362 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
39363 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39364 Date:   Fri Jul 27 16:44:31 2007 +0200
39365
39366     new FPGA image for PLU405 board
39367
39368     new FPGA image for PLU405 board with improved CompactFlash timing
39369
39370     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39371
39372 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
39373 Author: Rafal Jaworowski <raj@semihalf.com>
39374 Date:   Fri Jul 27 14:43:59 2007 +0200
39375
39376     [ADS5121] Support for the ADS5121 board
39377
39378     The following MPC5121e subsystems are supported:
39379
39380     - low-level CPU init
39381     - NOR Boot Flash (common CFI driver)
39382     - DDR SDRAM
39383     - FEC
39384     - I2C
39385     - Watchdog
39386
39387     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
39388     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
39389     Signed-off-by: Jan Wrobel <wrr@semihalf.com>
39390
39391 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
39392 Author: Rafal Jaworowski <raj@semihalf.com>
39393 Date:   Fri Jul 27 14:22:04 2007 +0200
39394
39395     [PPC] Remove unused MSR_USER definition
39396
39397     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
39398
39399 commit d4024bb72dd81695ec099b2199eda0d27c623e62
39400 Author: John Otken <john@softadvances.com>
39401 Date:   Thu Jul 26 17:49:11 2007 +0200
39402
39403     ppc4xx: Add support for AMCC 405EP Taihu board
39404
39405     Signed-off-by: John Otken <john@softadvances.com>
39406
39407 commit b66091de6c7390620312c2501db23d8391e7cabb
39408 Author: Anatolij Gustschin <agust@denx.de>
39409 Date:   Thu Jul 26 15:08:01 2007 +0200
39410
39411     ppc4xx: lwmon5: Update Lime initialization
39412
39413     Change Lime SDRAM initialization to now support 100MHz and
39414     133MHz (if enabled). Also the framebuffer is initialized to
39415     display a blue rectangle with a white border.
39416
39417     Signed-off-by: Anatolij Gustschin <agust@denx.de>
39418     Signed-off-by: Stefan Roese <sr@denx.de>
39419
39420 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
39421 Author: Stefan Roese <sr@denx.de>
39422 Date:   Tue Jul 24 09:52:52 2007 +0200
39423
39424     ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
39425
39426     The used Intel NOR FLASH chips have internally two dies, and are now
39427     treated as two seperate chips.
39428
39429     Signed-off-by: Stefan Roese <sr@denx.de>
39430
39431 commit aedf5bde179ecfbd0a96130d18996a96518b785f
39432 Author: Stefan Roese <sr@denx.de>
39433 Date:   Tue Jul 24 07:20:09 2007 +0200
39434
39435     ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
39436
39437     As suggested by Hakan Eryigit, here an updated setup for the lwmon5
39438     interrupt controller.
39439
39440     Signed-off-by: Stefan Roese <sr@denx.de>
39441
39442 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
39443 Author: Stefan Roese <sr@denx.de>
39444 Date:   Fri Jul 20 15:03:44 2007 +0200
39445
39446     ppc4xx: Fix bug with default GPIO output value
39447
39448     As spotted by Matthias Fuchs, the default output values for all GPIO1
39449     outputs were not setup correctly. This patch fixes this issue.
39450
39451     Signed-off-by: Stefan Roese <sr@denx.de>
39452
39453 commit 531e3e8b831f357056448fa573137d5fb37000fd
39454 Author: Pavel Kolesnikov <concord@emcraft.com>
39455 Date:   Fri Jul 20 15:03:03 2007 +0200
39456
39457     POST: Add ECC POST for the lwmon5 board
39458
39459     This patch adds ECC Post test for the Lwmon5 board based
39460     on PPC440EPx to U-Boot.
39461
39462     Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
39463     Acked-by: Yuri Tikhonov <yur@emcraft.com>
39464     Acked-by: Stefan Roese <sr@denx.de>
39465
39466 commit cc3023b9f95d7ac959a764471a65001062aecf41
39467 Author: Rafal Jaworowski <raj@semihalf.com>
39468 Date:   Thu Jul 19 17:12:28 2007 +0200
39469
39470     Fix breakage of 8xx boards from recent commit.
39471
39472     This patch fixes the negative consequences for 8xx of the recent
39473     "ppc4xx: Clean up 440 exceptions handling" commit.
39474
39475     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
39476
39477 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
39478 Author: Stefan Roese <sr@denx.de>
39479 Date:   Mon Jul 16 13:11:12 2007 +0200
39480
39481     Coding style cleanup
39482
39483     Signed-off-by: Stefan Roese <sr@denx.de>
39484
39485 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
39486 Author: Stefan Roese <sr@denx.de>
39487 Date:   Mon Jul 16 10:02:12 2007 +0200
39488
39489     ppc4xx: Code cleanup
39490
39491     Signed-off-by: Stefan Roese <sr@denx.de>
39492
39493 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
39494 Author: Stefan Roese <sr@denx.de>
39495 Date:   Mon Jul 16 10:01:38 2007 +0200
39496
39497     ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
39498
39499     Signed-off-by: Stefan Roese <sr@denx.de>
39500
39501 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
39502 Author: Stefan Roese <sr@denx.de>
39503 Date:   Mon Jul 16 10:00:43 2007 +0200
39504
39505     ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
39506
39507     The new boardspecific DDR2 controller configuration is used for the Yucca
39508     board. Now the Yucca board with 440SPe Rev. A chips is also supported.
39509
39510     Signed-off-by: Stefan Roese <sr@denx.de>
39511
39512 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
39513 Author: Stefan Roese <sr@denx.de>
39514 Date:   Mon Jul 16 09:57:00 2007 +0200
39515
39516     ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
39517
39518     The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
39519     support non default, boardspecific DDR(2) controller configuration.
39520
39521     Signed-off-by: Stefan Roese <sr@denx.de>
39522
39523 commit 5743a9207a370b90f09b20ebd61167c806b937f3
39524 Author: Stefan Roese <sr@denx.de>
39525 Date:   Mon Jul 16 08:53:51 2007 +0200
39526
39527     ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
39528
39529     The new function remove_tlb() can be used to remove the TLB's used to
39530     map a specific memory region. This is especially useful for the DDR(2)
39531     setup routines which configure the SDRAM area temporarily as a cached
39532     area (for speedup on auto-calibration and ECC generation) and later
39533     need this area uncached for normal usage.
39534
39535     Signed-off-by: Stefan Roese <sr@denx.de>
39536
39537 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
39538 Author: Michal Simek <monstr@monstr.eu>
39539 Date:   Mon Jul 16 00:31:07 2007 +0200
39540
39541     [PATCH] Support for Xilinx EmacLite controller
39542
39543 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
39544 Author: Wolfgang Denk <wd@denx.de>
39545 Date:   Sat Jul 14 22:51:02 2007 +0200
39546
39547     Update CHANGELOG
39548
39549     Signed-off-by: Wolfgang Denk <wd@denx.de>
39550
39551 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
39552 Author: Michal Simek <monstr@monstr.eu>
39553 Date:   Sat Jul 14 13:11:28 2007 +0200
39554
39555     [FIX] support for simply measuring time
39556
39557 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
39558 Author: Michal Simek <monstr@monstr.eu>
39559 Date:   Sat Jul 14 12:41:23 2007 +0200
39560
39561     [FS] Added support for ROMFS
39562
39563 commit 011595307731a7a67a7445d107c279d031e8ab97
39564 Author: Heiko Schocher <hs@pollux.denx.de>
39565 Date:   Sat Jul 14 01:06:58 2007 +0200
39566
39567     [PCS440EP]  - fix compile error, if BUILD_DIR is used
39568
39569 commit 5a2f1098d81ad58b309e5e558d0492643166a799
39570 Author: Michal Simek <monstr@monstr.eu>
39571 Date:   Sat Jul 14 00:18:48 2007 +0200
39572
39573     [PATCH] Support time without timer
39574
39575 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
39576 Author: Michal Simek <monstr@monstr.eu>
39577 Date:   Fri Jul 13 21:43:55 2007 +0200
39578
39579     [PATCH] Remove problem with disabled BARREL SHIFTER
39580
39581 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
39582 Author: Michal Simek <monstr@monstr.eu>
39583 Date:   Fri Jul 13 21:41:44 2007 +0200
39584
39585     [FIX] correct help for rspr
39586
39587 commit fad63407154f46246ce80d53a9c669a44362ac67
39588 Author: Heiko Schocher <hs@pollux.denx.de>
39589 Date:   Fri Jul 13 09:54:17 2007 +0200
39590
39591     make show_boot_progress () weak.
39592
39593     Signed-off-by: Heiko Schocher <hs@denx.de>
39594
39595 commit 907902472391b6ca1876ec300687562ecaf459b1
39596 Author: Heiko Schocher <hs@pollux.denx.de>
39597 Date:   Fri Jul 13 08:26:05 2007 +0200
39598
39599     [PCS440EP]  - The DIAG LEDs are now blinking, if an error occur
39600                 - fix compile error, if BUILD_DIR is used
39601
39602     Signed-off-by: Heiko Schocher <hs@denx.de>
39603
39604 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
39605 Author: Stefan Roese <sr@denx.de>
39606 Date:   Thu Jul 12 16:32:08 2007 +0200
39607
39608     ppc4xx: Change receive buffer handling in the 4xx emac driver
39609
39610     This change fixes a bug in the receive buffer handling, that
39611     could lead to problems upon high network traffic (broadcasts...).
39612
39613     Signed-off-by: Stefan Roese <sr@denx.de>
39614
39615 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
39616 Author: Wolfgang Denk <wd@denx.de>
39617 Date:   Thu Jul 12 01:45:34 2007 +0200
39618
39619     Update CHANGELOG, minor coding style cleanup.
39620
39621     Signed-off-by: Wolfgang Denk <wd@denx.de>
39622
39623 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
39624 Author: Andy Fleming <afleming@freescale.com>
39625 Date:   Fri Jun 8 16:41:18 2007 -0500
39626
39627     Remove erroneous errata code from Marvel 88E1111S driver
39628
39629     The Marvel 88E1111S driver for the TSEC was copied from the
39630     88E1101 driver, and included a fix for an erratum which does not
39631     exist on that part.  Now it is removed
39632
39633     Signed-off-by: Andy Fleming <afleming@freescale.com>
39634
39635 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
39636 Author: Andy Fleming <afleming@freescale.com>
39637 Date:   Tue Jun 5 16:38:44 2007 -0500
39638
39639     From: eran liberty <eran.liberty@gmail.com>
39640
39641     adds the reset register to 85xx immap
39642
39643     Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
39644     Signed-off-by: Andy Fleming <afleming@freescale.com>
39645
39646 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
39647 Author: Andy Fleming <afleming@freescale.com>
39648 Date:   Thu May 10 17:50:01 2007 -0500
39649
39650     Polished the 85xx ADS config files
39651
39652     Made the boot commands use device trees by default.
39653     Also moved the ramdisk to 1000000 (I think the previous address
39654     was getting overridden during boot).
39655
39656     Signed-off-by: Andy Fleming <afleming@freescale.com>
39657
39658 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
39659 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39660 Date:   Wed May 9 11:03:32 2007 -0500
39661
39662     8544ds: Fix Makefile after moving pixis to board/freescale.
39663
39664     The OBJTREE != SRCTREE build scenario was broken.
39665     This fixes it.
39666
39667     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39668     Signed-off-by: Jon Loeliger <jdl@freescale.com>
39669
39670 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
39671 Author: Andy Fleming <afleming@freescale.com>
39672 Date:   Wed May 9 00:54:20 2007 -0500
39673
39674     tsec: Fix PHY code to match first driver
39675
39676     Jarrold Wen noticed that the generic PHY code always matches
39677     under the current implementation.  Change it so the first match
39678     wins, and *only* unknown PHYs trigger the generic driver
39679
39680     Signed-off-by: Andy Fleming <afleming@freescale.com>
39681
39682 commit ccc091aac61a38cd998d575d92f7232e256d6312
39683 Author: Andy Fleming <afleming@freescale.com>
39684 Date:   Tue May 8 17:27:43 2007 -0500
39685
39686     Add support for CPM device tree configuration to 8560 ADS
39687
39688     * Adds code to modify CPM frequencies
39689     * Cleans up the config file to #define TSEC and (for now) #undef FCC
39690     * Adds the MII command for all 8560 ADS configurations
39691     * Updates config file to provide convenience commands for booting
39692       with a device tree
39693
39694     Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
39695     Signed-off-by: Andy Fleming <afleming@freescale.com>
39696
39697 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
39698 Author: Andy Fleming <afleming@freescale.com>
39699 Date:   Tue May 8 17:23:02 2007 -0500
39700
39701     Fix Marvell 88e1145 PHY init code
39702
39703     Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
39704     where the reset was being done after the errata code instead of
39705     before.
39706
39707     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
39708     Signed-off-by: Andy Fleming <afleming@freescale.com>
39709
39710 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
39711 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39712 Date:   Wed Jul 11 14:52:16 2007 -0500
39713
39714     Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
39715
39716     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39717
39718 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
39719 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39720 Date:   Wed Jul 11 14:52:08 2007 -0500
39721
39722     pciauto setup bridge
39723
39724     The P2P bridge bus numbers programmed into the device are relative to
39725     hose->first_busno.
39726
39727     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39728
39729 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
39730 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39731 Date:   Wed Jul 11 14:52:01 2007 -0500
39732
39733     Support PCIe extended config registers
39734
39735     FSL PCIe block has extended cfg registers in the 100 and 400 range.
39736     For example, to read the LTSSM register: pci display <busn>.0 404 1
39737
39738     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39739
39740 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
39741 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39742 Date:   Wed Jul 11 14:51:48 2007 -0500
39743
39744     Minor improvements to drivers/pci_auto.c
39745
39746     - Make pciauto_{pre,post}scan_setup_bridge non-static
39747     - Added physical address display in debug messages.
39748
39749     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39750
39751 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
39752 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39753 Date:   Wed Jul 11 14:51:35 2007 -0500
39754
39755     Start pci hose scan from hose->current_busno.
39756
39757     Ensure hose->current_busno is not less than first_busno.  This fixes
39758     broken board code which leaves current_busno=0 when first_busno is
39759     greater than 0 for the cases with multiple controllers.
39760
39761     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39762
39763 commit 3865b1fb7843a08ad49a6319a36415752276ff48
39764 Author: Stefan Roese <sr@denx.de>
39765 Date:   Wed Jul 11 12:13:53 2007 +0200
39766
39767     Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
39768
39769     Signed-off-by: Stefan Roese <sr@denx.de>
39770
39771 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
39772 Author: Bartlomiej Sieka <tur@semihalf.com>
39773 Date:   Wed Jul 11 20:11:07 2007 +0200
39774
39775     CM1.QP1: Support for the Schindler CM1.QP1 board.
39776
39777     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
39778     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
39779
39780 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
39781 Author: Heiko Schocher <hs@pollux.denx.de>
39782 Date:   Wed Jul 11 18:39:11 2007 +0200
39783
39784     [PCS440EP]  - Show on the DIAG LEDs, if the SHA1 check failed
39785                 - now the Flash ST M29W040B is supported (not tested)
39786                 - fix the "led" command
39787                 - fix compile error, if BUILD_DIR is used
39788
39789     Signed-off-by: Heiko Schocher <hs@denx.de>
39790
39791 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
39792 Author: Stefan Roese <sr@denx.de>
39793 Date:   Sun Jul 8 13:44:27 2007 +0200
39794
39795     Fix malloc problem introduced with the relocation fixup for the PPC platform
39796
39797     The relocation fixup didn't handle the malloc pointer initialization
39798     correctly. This patch fixes this problem. Tested successfully on 4xx.
39799     The relocation fixup patches for 4xx will follow soon.
39800
39801     Signed-off-by: Stefan Roese <sr@denx.de>
39802
39803 commit 0dca874db62718e41253659e60f3a1de7eb418ce
39804 Author: TsiChung <tcliew@Goku.(none)>
39805 Date:   Tue Jul 10 15:45:43 2007 -0500
39806
39807     Cache update and added CFG_UNIFY_CACHE
39808
39809     Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
39810
39811     Signed-off-by: TsiChung <tcliew@Goku.(none)>
39812
39813 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
39814 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39815 Date:   Thu Jul 5 23:36:16 2007 -0500
39816
39817     Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
39818
39819     Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
39820
39821     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39822
39823 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
39824 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39825 Date:   Thu Jul 5 23:31:25 2007 -0500
39826
39827     Update header files
39828
39829     Include immap.h and renamed mcfrtc.h to rtc.h
39830
39831     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39832
39833 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
39834 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39835 Date:   Thu Jul 5 23:29:21 2007 -0500
39836
39837     Add mcffec_initialize()
39838
39839     Added mcffec_initialize() in eth_initialize()
39840
39841     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39842
39843 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
39844 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39845 Date:   Thu Jul 5 23:27:40 2007 -0500
39846
39847     Update header file and clean up
39848
39849     Include immap.h
39850
39851     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39852
39853 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
39854 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39855 Date:   Thu Jul 5 23:23:15 2007 -0500
39856
39857     New uart structure and defines
39858
39859     Seperated from mcfuart.h
39860
39861     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39862
39863 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
39864 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39865 Date:   Thu Jul 5 23:22:31 2007 -0500
39866
39867     New timer structure and defines
39868
39869     Seperated from mcftimer.h
39870
39871     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39872
39873 commit e04acb2eba4782489417240eff76e20e176aec10
39874 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39875 Date:   Thu Jul 5 23:21:09 2007 -0500
39876
39877     Rename mcfrtc to rtc
39878
39879     Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
39880
39881     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39882
39883 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
39884 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39885 Date:   Thu Jul 5 23:17:36 2007 -0500
39886
39887     Rename mcfserial.c. Update include header
39888
39889     Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
39890
39891     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39892
39893 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
39894 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39895 Date:   Thu Jul 5 23:13:58 2007 -0500
39896
39897     Header file update, clean up and cache handling
39898
39899     Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
39900
39901     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39902
39903 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
39904 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39905 Date:   Thu Jul 5 23:10:40 2007 -0500
39906
39907     Create interrupts.c and modify Makefile
39908
39909     interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
39910
39911     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39912
39913 commit ddd104f1ed655eda50c06ba636237a83ed943f34
39914 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39915 Date:   Thu Jul 5 23:06:55 2007 -0500
39916
39917     Enable Icache
39918
39919     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39920
39921 commit b9bf3de377b2bae70c983c9b97feae914999e735
39922 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39923 Date:   Thu Jul 5 23:05:31 2007 -0500
39924
39925     Update header file and some clean up
39926
39927     Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
39928
39929     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39930
39931 commit 84a015b52ec820a5ae173717d78516de731c89c2
39932 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39933 Date:   Thu Jul 5 23:03:28 2007 -0500
39934
39935     Update header file and enable icache
39936
39937     Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
39938
39939     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39940
39941 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
39942 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39943 Date:   Thu Jul 5 23:01:22 2007 -0500
39944
39945     Update header file and removed interrupt_init()
39946
39947     Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
39948
39949     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39950
39951 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
39952 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39953 Date:   Thu Jul 5 22:57:46 2007 -0500
39954
39955     Update for flash.o and mii.o
39956
39957     Removed flash.o and added mii.o
39958
39959     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39960
39961 commit c5ded275d839e4ff79f41718d50a835d989f57bc
39962 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39963 Date:   Thu Jul 5 22:56:19 2007 -0500
39964
39965     MII functions calls.
39966
39967     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39968
39969 commit 427c814104560e29bda14955c67703245aaaa5b4
39970 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39971 Date:   Thu Jul 5 22:54:42 2007 -0500
39972
39973     Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
39974
39975     The removed MII routines will be placed in mii.c.
39976
39977     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39978
39979 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
39980 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39981 Date:   Thu Jul 5 22:51:05 2007 -0500
39982
39983     Duplicate code
39984
39985     There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
39986
39987     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39988
39989 commit 2744354a8437b8f78db178e30660215688bff570
39990 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39991 Date:   Thu Jul 5 22:46:38 2007 -0500
39992
39993     Seperate old structure defines and new structure defines
39994
39995     Removed new uart structure and defines to uart.h
39996
39997     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39998
39999 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
40000 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40001 Date:   Thu Jul 5 22:45:01 2007 -0500
40002
40003     Seperate old structure defines and new structure defines
40004
40005     New timer structure and defines will move to new timer.h
40006
40007     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40008
40009 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
40010 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40011 Date:   Thu Jul 5 22:42:23 2007 -0500
40012
40013     Clean up
40014
40015     Removed whitespace
40016
40017     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40018
40019 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
40020 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40021 Date:   Thu Jul 5 22:41:24 2007 -0500
40022
40023     Clean up
40024
40025     Replaced whitespace with tabs
40026
40027     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40028
40029 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
40030 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40031 Date:   Thu Jul 5 22:39:07 2007 -0500
40032
40033     Create new header file and move peripherals base address from configs file to new header file.
40034
40035     Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
40036
40037     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40038
40039 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
40040 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40041 Date:   Thu Jul 5 22:24:58 2007 -0500
40042
40043     Revert file mode
40044
40045     Changed MAKEALL file mode to executable, removed executable file mode from Makefile
40046
40047     Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40048
40049 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
40050 Author: Jon Loeliger <jdl@freescale.com>
40051 Date:   Tue Jul 10 11:19:50 2007 -0500
40052
40053     disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
40054
40055     Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
40056     Those always evaluated TRUE, and thus were always compiled
40057     even when IDE really wasn't defined/wanted.
40058
40059     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40060
40061 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
40062 Author: Jon Loeliger <jdl@freescale.com>
40063 Date:   Tue Jul 10 11:13:21 2007 -0500
40064
40065     drivers/: Remove lingering references to CFG_CMD_* symbols.
40066
40067     Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
40068     Those always evaluated TRUE, and thus were always compiled
40069     even when IDE really wasn't defined/wanted.
40070
40071     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40072
40073 commit f40a7f3e3888b42a43674b099e5470022c8c544c
40074 Author: Jon Loeliger <jdl@freescale.com>
40075 Date:   Tue Jul 10 11:07:56 2007 -0500
40076
40077     fs/: Remove lingering references to CFG_CMD_* symbols.
40078
40079     Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
40080     Those always evaluated TRUE, and thus were always compiled
40081     even when IDE really wasn't defined/wanted.
40082
40083     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40084
40085 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
40086 Author: Jon Loeliger <jdl@freescale.com>
40087 Date:   Tue Jul 10 11:05:02 2007 -0500
40088
40089     net/: Remove lingering references to CFG_CMD_* symbols.
40090
40091     Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
40092     Those always evaluated TRUE, and thus were always compiled
40093     even when IDE really wasn't defined/wanted.
40094
40095     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40096
40097 commit 902531788376046da212afd1661cffb62f3daa1c
40098 Author: Jon Loeliger <jdl@freescale.com>
40099 Date:   Tue Jul 10 11:02:44 2007 -0500
40100
40101     common/: Remove lingering references to CFG_CMD_* symbols.
40102
40103     Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
40104     Those always evaluated TRUE, and thus were always compiled
40105     even when IDE really wasn't defined/wanted.
40106
40107     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40108
40109 commit d39b57415838c73fb0a37eca84de3c68ba990586
40110 Author: Jon Loeliger <jdl@freescale.com>
40111 Date:   Tue Jul 10 10:48:22 2007 -0500
40112
40113     board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
40114
40115     Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
40116     Those always evaluated TRUE, and thus were always compiled
40117     even when IDE really wasn't defined/wanted.
40118
40119     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40120
40121 commit 77a318545d57aefa844752465b94c7e09a3f26d0
40122 Author: Jon Loeliger <jdl@freescale.com>
40123 Date:   Tue Jul 10 10:39:10 2007 -0500
40124
40125     board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
40126
40127     Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
40128     Those always evaluated TRUE, and thus were always compiled
40129     even when IDE really wasn't defined/wanted.
40130
40131     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40132
40133 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
40134 Author: Jon Loeliger <jdl@freescale.com>
40135 Date:   Tue Jul 10 10:27:39 2007 -0500
40136
40137     cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
40138
40139     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40140
40141 commit 079a136c3588814784561d6e4856970ee82d6e2a
40142 Author: Jon Loeliger <jdl@freescale.com>
40143 Date:   Tue Jul 10 10:12:10 2007 -0500
40144
40145     include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
40146
40147     Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
40148     used to be included but CONFIG_BOOTP_MASK was not defined.
40149
40150     Remove lingering references to CFG_CMD_* symbols.
40151
40152     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40153
40154 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
40155 Author: Jon Loeliger <jdl@freescale.com>
40156 Date:   Tue Jul 10 09:38:02 2007 -0500
40157
40158     include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
40159
40160     Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
40161     used to be included but CONFIG_BOOTP_MASK was not defined.
40162
40163     Remove lingering references to CFG_CMD_* symbols.
40164
40165     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40166
40167 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
40168 Author: Jon Loeliger <jdl@freescale.com>
40169 Date:   Tue Jul 10 09:29:01 2007 -0500
40170
40171     include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
40172
40173     Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
40174     used to be included but CONFIG_BOOTP_MASK was not defined.
40175
40176     Remove lingering references to CFG_CMD_* symbols.
40177
40178     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40179
40180 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
40181 Author: Jon Loeliger <jdl@freescale.com>
40182 Date:   Tue Jul 10 09:22:23 2007 -0500
40183
40184     include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
40185
40186     Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
40187     used to be included but CONFIG_BOOTP_MASK was not defined.
40188
40189     Remove lingering references to CFG_CMD_* symbols.
40190
40191     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40192
40193 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
40194 Author: Jon Loeliger <jdl@freescale.com>
40195 Date:   Tue Jul 10 09:10:49 2007 -0500
40196
40197     include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
40198
40199     Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
40200     used to be included but CONFIG_BOOTP_MASK was not defined.
40201
40202     Remove lingering references to CFG_CMD_* symbols.
40203
40204     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40205
40206 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
40207 Author: Jon Loeliger <jdl@freescale.com>
40208 Date:   Tue Jul 10 09:02:57 2007 -0500
40209
40210     include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
40211
40212     Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
40213     used to be included but CONFIG_BOOTP_MASK was not defined.
40214
40215     Remove lingering references to CFG_CMD_* symbols.
40216
40217     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40218
40219 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
40220 Author: Jon Loeliger <jdl@freescale.com>
40221 Date:   Mon Jul 9 22:08:34 2007 -0500
40222
40223     Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
40224
40225     All of the choices for CONFIG_BOOTP_ are now documented in
40226     the README file.  You must now individually select exactly
40227     the set that you want using a series of
40228         #define CONFIG_BOOTP_<x>
40229     statements in the board port config files now.
40230
40231     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40232
40233 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
40234 Author: Jon Loeliger <jdl@freescale.com>
40235 Date:   Mon Jul 9 21:57:31 2007 -0500
40236
40237     include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
40238
40239     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40240
40241 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
40242 Author: Jon Loeliger <jdl@freescale.com>
40243 Date:   Mon Jul 9 21:48:26 2007 -0500
40244
40245     include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
40246
40247     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40248
40249 commit 37d4bb70586659dedef1658ce1bed071be098aec
40250 Author: Jon Loeliger <jdl@freescale.com>
40251 Date:   Mon Jul 9 21:38:02 2007 -0500
40252
40253     include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
40254
40255     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40256
40257 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
40258 Author: Jon Loeliger <jdl@freescale.com>
40259 Date:   Mon Jul 9 21:31:24 2007 -0500
40260
40261     include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
40262
40263     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40264
40265 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
40266 Author: Jon Loeliger <jdl@freescale.com>
40267 Date:   Mon Jul 9 21:24:19 2007 -0500
40268
40269     include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
40270
40271     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40272
40273 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
40274 Author: Jon Loeliger <jdl@freescale.com>
40275 Date:   Mon Jul 9 21:16:53 2007 -0500
40276
40277     include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
40278
40279     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40280
40281 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
40282 Author: Jon Loeliger <jdl@freescale.com>
40283 Date:   Mon Jul 9 19:12:30 2007 -0500
40284
40285     Retire CONFIG_COMMANDS finally.
40286     Strip old CFG_CMD_* symbols out.
40287
40288     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40289
40290 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
40291 Author: Jon Loeliger <jdl@freescale.com>
40292 Date:   Mon Jul 9 19:10:03 2007 -0500
40293
40294     Update README.* to reference new CONFIG_CMD_* names now.
40295
40296     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40297
40298 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
40299 Author: Jon Loeliger <jdl@freescale.com>
40300 Date:   Mon Jul 9 19:06:00 2007 -0500
40301
40302     cpu/m*: Remove obsolete references to CONFIG_COMMANDS
40303
40304     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40305
40306 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
40307 Author: Jon Loeliger <jdl@freescale.com>
40308 Date:   Mon Jul 9 18:57:22 2007 -0500
40309
40310     cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
40311
40312     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40313
40314 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
40315 Author: Jon Loeliger <jdl@freescale.com>
40316 Date:   Mon Jul 9 18:45:16 2007 -0500
40317
40318     board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
40319
40320     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40321
40322 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
40323 Author: Jon Loeliger <jdl@freescale.com>
40324 Date:   Mon Jul 9 18:38:39 2007 -0500
40325
40326     board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
40327
40328     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40329
40330 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
40331 Author: Jon Loeliger <jdl@freescale.com>
40332 Date:   Mon Jul 9 18:31:28 2007 -0500
40333
40334     board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
40335
40336     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40337
40338 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
40339 Author: Jon Loeliger <jdl@freescale.com>
40340 Date:   Mon Jul 9 18:24:55 2007 -0500
40341
40342     board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
40343
40344     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40345
40346 commit fcec2eb93e126400009729328e797f12bc94f1fd
40347 Author: Jon Loeliger <jdl@freescale.com>
40348 Date:   Mon Jul 9 18:19:09 2007 -0500
40349
40350     board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
40351
40352     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40353
40354 commit a593814f2be0c9cdc3133cd550b167b8a988328f
40355 Author: Jon Loeliger <jdl@freescale.com>
40356 Date:   Mon Jul 9 18:10:50 2007 -0500
40357
40358     rtc/: Remove obsolete references to CONFIG_COMMANDS
40359
40360     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40361
40362 commit 67350568f9d46e66c21829f3513b3db0caeb948b
40363 Author: Jon Loeliger <jdl@freescale.com>
40364 Date:   Mon Jul 9 18:05:38 2007 -0500
40365
40366     lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
40367
40368     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40369
40370 commit 7def6b34f910f08d7ef0a14646da067719237ca2
40371 Author: Jon Loeliger <jdl@freescale.com>
40372 Date:   Mon Jul 9 18:02:11 2007 -0500
40373
40374     lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
40375
40376     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40377
40378 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
40379 Author: Jon Loeliger <jdl@freescale.com>
40380 Date:   Mon Jul 9 17:56:50 2007 -0500
40381
40382     fs/: Remove obsolete references to CONFIG_COMMANDS
40383
40384     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40385
40386 commit c91898bbc505aff3e12a807af88e76da18efb7ee
40387 Author: Jon Loeliger <jdl@freescale.com>
40388 Date:   Mon Jul 9 17:46:09 2007 -0500
40389
40390     tools/: Remove obsolete references to CONFIG_COMMANDS
40391
40392     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40393
40394 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
40395 Author: Jon Loeliger <jdl@freescale.com>
40396 Date:   Mon Jul 9 17:45:14 2007 -0500
40397
40398     net/: Remove obsolete references to CONFIG_COMMANDS
40399
40400     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40401
40402 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
40403 Author: Jon Loeliger <jdl@freescale.com>
40404 Date:   Mon Jul 9 17:39:42 2007 -0500
40405
40406     drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
40407
40408     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40409
40410 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
40411 Author: Jon Loeliger <jdl@freescale.com>
40412 Date:   Mon Jul 9 17:30:01 2007 -0500
40413
40414     drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
40415
40416     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40417
40418 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
40419 Author: Jon Loeliger <jdl@freescale.com>
40420 Date:   Mon Jul 9 17:22:37 2007 -0500
40421
40422     disk/: Remove obsolete references to CONFIG_COMMANDS
40423
40424     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40425
40426 commit 639221c76c88215bd55af83ad174fc30d1940f8f
40427 Author: Jon Loeliger <jdl@freescale.com>
40428 Date:   Mon Jul 9 17:15:49 2007 -0500
40429
40430     include/: Remove obsolete references to CONFIG_COMMANDS
40431     Mostly removed from comments here.
40432
40433     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40434
40435 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
40436 Author: Wolfgang Denk <wd@denx.de>
40437 Date:   Tue Jul 10 00:01:28 2007 +0200
40438
40439     Coding style cleanup; update CHANGELOG.
40440
40441     Signed-off-by: Wolfgang Denk <wd@denx.de>
40442
40443 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
40444 Author: Stefan Roese <sr@denx.de>
40445 Date:   Mon Jul 9 11:00:24 2007 +0200
40446
40447     Small coding style cleanup
40448
40449     Signed-off-by: Stefan Roese <sr@denx.de>
40450
40451 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
40452 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40453 Date:   Mon Jul 9 10:10:08 2007 +0200
40454
40455     Migrate esd 405EP boards to new NAND subsystem
40456
40457     Remove unused CFG_NAND_LEGACY define
40458
40459     These boards to not have NAND.
40460
40461     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40462
40463 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
40464 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40465 Date:   Mon Jul 9 10:10:06 2007 +0200
40466
40467     Migrate esd 405EP boards to new NAND subsystem
40468
40469     Migrate esd 405EP boards to new NAND subsystem
40470
40471     -cleanup
40472     -use correct io accessors (in/out_be32())
40473
40474     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40475
40476 commit e09f7ab5749c345f924da272bea0521a73af5b11
40477 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40478 Date:   Mon Jul 9 10:10:04 2007 +0200
40479
40480     Migrate esd 405EP boards to new NAND subsystem
40481
40482     This patch prepares the migration from the legacy NAND driver
40483     to U-Boot's new NAND subsystem for esd boards.
40484
40485     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40486
40487 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
40488 Author: Jon Loeliger <jdl@freescale.com>
40489 Date:   Sun Jul 8 18:10:08 2007 -0500
40490
40491     common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
40492
40493     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40494
40495 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
40496 Author: Jon Loeliger <jdl@freescale.com>
40497 Date:   Sun Jul 8 18:05:39 2007 -0500
40498
40499     common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
40500
40501     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40502
40503 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
40504 Author: Jon Loeliger <jdl@freescale.com>
40505 Date:   Sun Jul 8 18:02:23 2007 -0500
40506
40507     common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
40508
40509     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40510
40511 commit baa26db4113679b80970ff447d91cc10217742a6
40512 Author: Jon Loeliger <jdl@freescale.com>
40513 Date:   Sun Jul 8 17:51:39 2007 -0500
40514
40515     common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
40516
40517     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40518
40519 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
40520 Author: Jon Loeliger <jdl@freescale.com>
40521 Date:   Sun Jul 8 17:02:01 2007 -0500
40522
40523     Clear up confusion over the CMD_POST and POST_DIAG mess.
40524
40525     For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
40526     when it really means just CONFIG_CMD_DIAG.  There is no CMD_POST.
40527     Clear this mess up some.
40528
40529     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40530
40531 commit b3631487105a57ab7cbadfc26efbaf9676275018
40532 Author: Jon Loeliger <jdl@freescale.com>
40533 Date:   Sun Jul 8 15:45:08 2007 -0500
40534
40535     Remove references to the old cmd_confdefs.h include file.
40536
40537     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40538
40539 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
40540 Author: Jon Loeliger <jdl@freescale.com>
40541 Date:   Sun Jul 8 15:42:59 2007 -0500
40542
40543     include/configs: Catch some CONFIG_CMD_* conversion stragglers.
40544
40545     Use new CONFIG_CMD_* in lwmon5.h board config file.
40546     Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
40547
40548     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40549
40550 commit a5562901661bd428f7e5feb333f796372cb81019
40551 Author: Jon Loeliger <jdl@freescale.com>
40552 Date:   Sun Jul 8 15:31:57 2007 -0500
40553
40554     include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
40555
40556     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40557
40558 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
40559 Author: Jon Loeliger <jdl@freescale.com>
40560 Date:   Sun Jul 8 15:02:44 2007 -0500
40561
40562     include/configs: Use new CONFIG_CMD_* in various S* named board config files.
40563
40564     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40565
40566 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
40567 Author: Jon Loeliger <jdl@freescale.com>
40568 Date:   Sun Jul 8 15:12:40 2007 -0500
40569
40570     include/configs: Use new CONFIG_CMD_* in various R* named board config files.
40571
40572     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40573
40574 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
40575 Author: Jon Loeliger <jdl@freescale.com>
40576 Date:   Sun Jul 8 14:55:07 2007 -0500
40577
40578     include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
40579
40580     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40581
40582 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
40583 Author: Jon Loeliger <jdl@freescale.com>
40584 Date:   Sun Jul 8 14:49:44 2007 -0500
40585
40586     include/configs: Use new CONFIG_CMD_* in various P* named board config files.
40587
40588     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40589
40590 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
40591 Author: Jon Loeliger <jdl@freescale.com>
40592 Date:   Sun Jul 8 14:21:43 2007 -0500
40593
40594     include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
40595
40596     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40597
40598 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
40599 Author: Jon Loeliger <jdl@freescale.com>
40600 Date:   Sun Jul 8 14:14:17 2007 -0500
40601
40602     include/configs: Use new CONFIG_CMD_* in various M* named board config files.
40603
40604     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40605
40606 commit 348f258f24253433e4a2302a0bbceb6740a67246
40607 Author: Jon Loeliger <jdl@freescale.com>
40608 Date:   Sun Jul 8 13:46:18 2007 -0500
40609
40610     include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
40611
40612     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40613
40614 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
40615 Author: Jon Loeliger <jdl@freescale.com>
40616 Date:   Sun Jul 8 10:09:35 2007 -0500
40617
40618     include/configs: Use new CONFIG_CMD_* in various H* named board config files.
40619
40620     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40621
40622 commit 60a0876b5106b34220e459c208bbf648073306c0
40623 Author: Jon Loeliger <jdl@freescale.com>
40624 Date:   Sat Jul 7 21:04:26 2007 -0500
40625
40626     include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
40627
40628     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40629
40630 commit dcaa71562826a2466e894c868d132509dcda8444
40631 Author: Jon Loeliger <jdl@freescale.com>
40632 Date:   Sat Jul 7 20:56:05 2007 -0500
40633
40634     include/configs: Use new CONFIG_CMD_* in various E* named board config files.
40635
40636     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40637
40638 commit 3c3227f3c737502311b25b72084573901cbbf17d
40639 Author: Jon Loeliger <jdl@freescale.com>
40640 Date:   Sat Jul 7 20:40:43 2007 -0500
40641
40642     include/configs: Use new CONFIG_CMD_* in various D* named board config files.
40643
40644     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40645
40646 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
40647 Author: Jon Loeliger <jdl@freescale.com>
40648 Date:   Thu Jul 5 19:52:35 2007 -0500
40649
40650     include/configs: Use new CONFIG_CMD_* in various C* named board config files.
40651
40652     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40653
40654 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
40655 Author: Jon Loeliger <jdl@freescale.com>
40656 Date:   Thu Jul 5 19:32:07 2007 -0500
40657
40658     include/configs: Use new CONFIG_CMD_* in various B* named board config files.
40659
40660     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40661
40662 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
40663 Author: Jon Loeliger <jdl@freescale.com>
40664 Date:   Thu Jul 5 19:13:52 2007 -0500
40665
40666     include/configs: Use new CONFIG_CMD_* in various A* named board config files.
40667
40668     Since ADS860.h includes "board/fads/fads.h" with ramifications
40669     on the CONFIG_COMMAND treatment, it too has to be adjusted to
40670     exclude already configured commands in this same commit.
40671
40672     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40673
40674 commit 10e038932f22ee80ebd53de312531e70e6590a2f
40675 Author: Thomas Knobloch <knobloch@siemens.com>
40676 Date:   Fri Jul 6 14:58:39 2007 +0200
40677
40678     [NAND] Bad block skipping for command nboot
40679
40680     The old implementation of command nboot does not support reading the image from
40681     NAND flash with skipping of bad blocks. The patch implements a new version of
40682     the nboot command: by calling nboot.jffs2 from the u-boot command line the
40683     command will load the image from NAND flash with respect to bad blocks (by using
40684     nand_read_opts()). This is similar to e.g. the NAND read command: "nand
40685     read.jffs2 ...".
40686
40687     Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
40688     Signed-off-by: Stefan Roese <sr@denx.de>
40689
40690 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
40691 Author: Stefan Roese <sr@denx.de>
40692 Date:   Fri Jul 6 12:26:51 2007 +0200
40693
40694     ppc4xx: Update lwmon5 default environment
40695
40696     Signed-off-by: Stefan Roese <sr@denx.de>
40697
40698 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
40699 Author: Stefan Roese <sr@denx.de>
40700 Date:   Fri Jul 6 11:48:24 2007 +0200
40701
40702     ppc4xx: Update lwmon5 board
40703
40704     Add unlock=yes environment variable to default variables to unlock
40705     the CFI flash by default.
40706
40707     Signed-off-by: Stefan Roese <sr@denx.de>
40708
40709 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
40710 Author: Stefan Roese <sr@denx.de>
40711 Date:   Fri Jul 6 09:45:47 2007 +0200
40712
40713     Fix problem with get/setdcr commands introduced by cfg patches
40714
40715     Signed-off-by: Stefan Roese <sr@denx.de>
40716
40717 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
40718 Author: Wolfgang Denk <wd@denx.de>
40719 Date:   Fri Jul 6 02:50:19 2007 +0200
40720
40721     Code cleanup and default config update for STC GP3 SSA board.
40722
40723     Signed-off-by: Wolfgang Denk <wd@denx.de>
40724
40725 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
40726 Author: Wolfgang Denk <wd@denx.de>
40727 Date:   Thu Jul 5 17:56:27 2007 +0200
40728
40729     Fixing some typos etc. introduced mainly by cfg patches.
40730
40731     Signed-off-by: Wolfgang Denk <wd@denx.de>
40732
40733 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
40734 Author: Wolfgang Denk <wd@denx.de>
40735 Date:   Thu Jul 5 11:12:16 2007 +0200
40736
40737     Minor coding style cleanup. Update CHANGELOG.
40738
40739 commit dca3b3d6d6396b67e5e84af53452164923c73443
40740 Author: Jon Loeliger <jdl@jdl.com>
40741 Date:   Wed Jul 4 22:33:46 2007 -0500
40742
40743     include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
40744
40745     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40746
40747 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
40748 Author: Jon Loeliger <jdl@jdl.com>
40749 Date:   Wed Jul 4 22:33:38 2007 -0500
40750
40751     include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
40752
40753     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40754
40755 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
40756 Author: Jon Loeliger <jdl@jdl.com>
40757 Date:   Wed Jul 4 22:33:30 2007 -0500
40758
40759     include/configs: Use new CONFIG_CMD_* in various s* named board config files.
40760
40761     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40762
40763 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
40764 Author: Jon Loeliger <jdl@jdl.com>
40765 Date:   Wed Jul 4 22:33:23 2007 -0500
40766
40767     include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
40768
40769     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40770
40771 commit 26a34560d56a9df5bc2ae23525d9229736134757
40772 Author: Jon Loeliger <jdl@jdl.com>
40773 Date:   Wed Jul 4 22:33:17 2007 -0500
40774
40775     include/configs: Use new CONFIG_CMD_* in various p* named board config files.
40776
40777     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40778
40779 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
40780 Author: Jon Loeliger <jdl@jdl.com>
40781 Date:   Wed Jul 4 22:33:13 2007 -0500
40782
40783     include/configs: Use new CONFIG_CMD_* in various o* named board config files.
40784
40785     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40786
40787 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
40788 Author: Jon Loeliger <jdl@jdl.com>
40789 Date:   Wed Jul 4 22:33:07 2007 -0500
40790
40791     include/configs: Use new CONFIG_CMD_* in various n* named board config files.
40792
40793     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40794
40795 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
40796 Author: Jon Loeliger <jdl@jdl.com>
40797 Date:   Wed Jul 4 22:33:01 2007 -0500
40798
40799     include/configs: Use new CONFIG_CMD_* in various m* named board config files.
40800
40801     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40802
40803 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
40804 Author: Jon Loeliger <jdl@jdl.com>
40805 Date:   Wed Jul 4 22:32:57 2007 -0500
40806
40807     include/configs: Use new CONFIG_CMD_* in various l* named board config files.
40808
40809     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40810
40811 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
40812 Author: Jon Loeliger <jdl@jdl.com>
40813 Date:   Wed Jul 4 22:32:51 2007 -0500
40814
40815     include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
40816
40817     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40818
40819 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
40820 Author: Jon Loeliger <jdl@jdl.com>
40821 Date:   Wed Jul 4 22:32:32 2007 -0500
40822
40823     include/configs: Use new CONFIG_CMD_* in various i* named board config files.
40824
40825     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40826
40827 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
40828 Author: Jon Loeliger <jdl@jdl.com>
40829 Date:   Wed Jul 4 22:32:25 2007 -0500
40830
40831     include/configs: Use new CONFIG_CMD_* in various h* named board config files.
40832
40833     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40834
40835 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
40836 Author: Jon Loeliger <jdl@jdl.com>
40837 Date:   Wed Jul 4 22:32:19 2007 -0500
40838
40839     include/configs: Use new CONFIG_CMD_* in various g* named board config files.
40840
40841     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40842
40843 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
40844 Author: Jon Loeliger <jdl@jdl.com>
40845 Date:   Wed Jul 4 22:32:10 2007 -0500
40846
40847     include/configs: Use new CONFIG_CMD_* in various e* named board config files.
40848
40849     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40850
40851 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
40852 Author: Jon Loeliger <jdl@jdl.com>
40853 Date:   Wed Jul 4 22:32:03 2007 -0500
40854
40855     include/configs: Use new CONFIG_CMD_* in various d* named board config files.
40856
40857     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40858
40859 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
40860 Author: Jon Loeliger <jdl@jdl.com>
40861 Date:   Wed Jul 4 22:31:56 2007 -0500
40862
40863     include/configs: Use new CONFIG_CMD_* in various c* named board config files.
40864
40865     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40866
40867 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
40868 Author: Jon Loeliger <jdl@jdl.com>
40869 Date:   Wed Jul 4 22:31:49 2007 -0500
40870
40871     include/configs: Use new CONFIG_CMD_* in various b* named board config files.
40872
40873     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40874
40875 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
40876 Author: Jon Loeliger <jdl@jdl.com>
40877 Date:   Wed Jul 4 22:31:42 2007 -0500
40878
40879     include/configs: Use new CONFIG_CMD_* in various a* named board config files.
40880
40881     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40882
40883 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
40884 Author: Jon Loeliger <jdl@jdl.com>
40885 Date:   Wed Jul 4 22:31:35 2007 -0500
40886
40887     include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
40888
40889     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40890
40891 commit d794cfefead5fc177cf4f41164e80382e9c9484a
40892 Author: Jon Loeliger <jdl@jdl.com>
40893 Date:   Wed Jul 4 22:31:15 2007 -0500
40894
40895     include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
40896
40897     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40898
40899 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
40900 Author: Jon Loeliger <jdl@jdl.com>
40901 Date:   Wed Jul 4 22:31:07 2007 -0500
40902
40903     include/configs: Use new CONFIG_CMD_* in STx board config files.
40904
40905     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40906
40907 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
40908 Author: Jon Loeliger <jdl@jdl.com>
40909 Date:   Wed Jul 4 22:30:58 2007 -0500
40910
40911     include/configs: Use new CONFIG_CMD_* in sbc* board config files.
40912
40913     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40914
40915 commit 2694690e285acaa34922f55f4b5ae030da60c55a
40916 Author: Jon Loeliger <jdl@jdl.com>
40917 Date:   Wed Jul 4 22:30:50 2007 -0500
40918
40919     include/configs: Use new CONFIG_CMD_* in TQM board config files.
40920
40921     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40922
40923 commit 1cc4c458329765b58e584a19821e796b3c10e976
40924 Author: Jon Loeliger <jdl@jdl.com>
40925 Date:   Wed Jul 4 22:30:28 2007 -0500
40926
40927     include/configs: Use new CONFIG_CMD_* in 82xx board config files.
40928
40929     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40930
40931 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
40932 Author: Jon Loeliger <jdl@jdl.com>
40933 Date:   Wed Jul 4 22:30:06 2007 -0500
40934
40935     include/configs: Use new CONFIG_CMD_* in 83xx board config files.
40936
40937     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40938
40939 commit b44896215a09c60fa40cae906f7ed207bbc2c492
40940 Author: Sergei Poselenov <sposelenov@emcraft.com>
40941 Date:   Thu Jul 5 08:17:37 2007 +0200
40942
40943     Merged POST framework with the current TOT.
40944
40945     Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
40946
40947 commit b24629fa377214d63bb40d1360e354b6d3e4af56
40948 Author: Jon Loeliger <jdl@jdl.com>
40949 Date:   Wed Jun 13 13:23:15 2007 -0500
40950
40951     mpc86xx: Remove old CFG_CMD_* references.
40952
40953     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40954
40955 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
40956 Author: Jon Loeliger <jdl@jdl.com>
40957 Date:   Wed Jun 13 13:22:54 2007 -0500
40958
40959     Add MPC8568MDS to MAKEALL 85xx target.
40960
40961     It was missing from the original port submission.
40962
40963     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40964
40965 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
40966 Author: Jon Loeliger <jdl@jdl.com>
40967 Date:   Wed Jun 13 13:22:08 2007 -0500
40968
40969     include/configs: Use new CONFIG_CMD_* in 85xx board config files.
40970
40971     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40972
40973 commit 56b304ac2091689506088a9ae67f63fd6300cf16
40974 Author: Jon Loeliger <jdl@jdl.com>
40975 Date:   Wed Jun 13 13:21:37 2007 -0500
40976
40977     Fix #if typo in CONFIG_CMD_* changes.
40978
40979     Signed-off-by: Jon Loeliger <jdl@freescale.com>
40980
40981 commit f780b83316d9af1f61d71cc88b1917b387b9b995
40982 Author: Niklaus Giger <niklausgiger@gmx.ch>
40983 Date:   Wed Jun 27 18:11:38 2007 +0200
40984
40985     resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
40986
40987     Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
40988
40989 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
40990 Author: Stefan Roese <sr@denx.de>
40991 Date:   Wed Jul 4 10:06:30 2007 +0200
40992
40993     ppc4xx: Update lwmon5 board
40994
40995     - Add optional ECC generation routine to preserve existing
40996       RAM values. This is needed for the Linux log-buffer support
40997     - Add optional DDR2 setup with CL=4
40998     - GPIO50 not used anymore
40999     - Lime register setup added
41000
41001     Signed-off-by: Stefan Roese <sr@denx.de>
41002
41003 commit 6810a34677dbc446334f5e451f1682426dd33b49
41004 Author: Grant Likely <grant.likely@secretlab.ca>
41005 Date:   Tue Jul 3 00:17:28 2007 -0600
41006
41007     Fix Makefile to use $(MKCONFIG) macro for all board ports
41008
41009     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41010
41011 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
41012 Author: Grant Likely <grant.likely@secretlab.ca>
41013 Date:   Tue Jul 3 00:17:28 2007 -0600
41014
41015     Fix Makefile to use $(MKCONFIG) macro for all board ports
41016
41017     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41018
41019 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
41020 Author: Grant Likely <grant.likely@secretlab.ca>
41021 Date:   Tue Jul 3 00:34:49 2007 -0600
41022
41023     Correct fixup relocation for mpc83xx
41024
41025     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41026
41027 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
41028 Author: Grant Likely <grant.likely@secretlab.ca>
41029 Date:   Tue Jul 3 00:34:44 2007 -0600
41030
41031     Correct fixup relocation for mpc8260
41032
41033     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41034
41035 commit f3a52fe05923935db86985daf9438e2f70ac39aa
41036 Author: Grant Likely <grant.likely@secretlab.ca>
41037 Date:   Tue Jul 3 00:34:39 2007 -0600
41038
41039     Correct fixup relocation for mpc824x
41040
41041     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41042
41043 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
41044 Author: Grant Likely <grant.likely@secretlab.ca>
41045 Date:   Tue Jul 3 00:34:34 2007 -0600
41046
41047     Correct fixup relocation for mpc8220
41048
41049     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41050
41051 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
41052 Author: Grant Likely <grant.likely@secretlab.ca>
41053 Date:   Tue Jul 3 00:34:29 2007 -0600
41054
41055     Correct fixup relocation for MPC5xxx
41056
41057     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41058
41059 commit 3649cd99ba815b6601868735765602f00ef3692b
41060 Author: Grant Likely <grant.likely@secretlab.ca>
41061 Date:   Tue Jul 3 00:34:24 2007 -0600
41062
41063     Correct relocation fixup for mpc5xx
41064
41065     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41066
41067 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
41068 Author: Grant Likely <grant.likely@secretlab.ca>
41069 Date:   Tue Jul 3 00:34:19 2007 -0600
41070
41071     Don't set gd->reloc_off if relocation of .fixup works correctly
41072
41073     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41074
41075 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
41076 Author: Grant Likely <grant.likely@secretlab.ca>
41077 Date:   Tue Jul 3 00:34:14 2007 -0600
41078
41079     Remove obsolete mpc83xx linker scripts
41080
41081     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41082
41083 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
41084 Author: Grant Likely <grant.likely@secretlab.ca>
41085 Date:   Tue Jul 3 00:34:09 2007 -0600
41086
41087     Consolidate mpc8260 linker scripts
41088
41089     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41090
41091 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
41092 Author: Grant Likely <grant.likely@secretlab.ca>
41093 Date:   Tue Jul 3 00:34:04 2007 -0600
41094
41095     Remove obsolete mpc824x linker scripts
41096
41097     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41098
41099 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
41100 Author: Grant Likely <grant.likely@secretlab.ca>
41101 Date:   Tue Jul 3 00:33:59 2007 -0600
41102
41103     Remove obsolete mpc824x linker scripts (3 of 4)
41104
41105     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41106
41107 commit a71c084f3ac7fedf144537db2b2da47323068833
41108 Author: Grant Likely <grant.likely@secretlab.ca>
41109 Date:   Tue Jul 3 00:33:53 2007 -0600
41110
41111     Remove obsolete mpc824x linker scripts (2 of 4)
41112
41113     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41114
41115 commit f670a15468d1365241d40022b9408e1004181f5e
41116 Author: Grant Likely <grant.likely@secretlab.ca>
41117 Date:   Tue Jul 3 00:33:48 2007 -0600
41118
41119     Remove obsolete mpc824x linker scripts (1 of 4)
41120
41121     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41122
41123 commit 09555bd45a04c0e54f172528d21bc18896550d28
41124 Author: Grant Likely <grant.likely@secretlab.ca>
41125 Date:   Tue Jul 3 00:33:43 2007 -0600
41126
41127     Remove obsolete mpc8220 linker scripts
41128
41129     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41130
41131 commit 5efb992f046e51225c93d52f80fecbe433abd789
41132 Author: Grant Likely <grant.likely@secretlab.ca>
41133 Date:   Tue Jul 3 00:33:38 2007 -0600
41134
41135     Remove obsolete mpc5xxx linker scripts (3 of 3)
41136
41137     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41138
41139 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
41140 Author: Grant Likely <grant.likely@secretlab.ca>
41141 Date:   Tue Jul 3 00:33:33 2007 -0600
41142
41143     Remove obsolete mpc5xxx linker scripts (2 of 3)
41144
41145     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41146
41147 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
41148 Author: Grant Likely <grant.likely@secretlab.ca>
41149 Date:   Tue Jul 3 00:33:28 2007 -0600
41150
41151     Remove obsolete mpc5xxx linker scripts (1 of 3)
41152
41153     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41154
41155 commit b7d8e05f8675249b5f208aa73babeed384a4519d
41156 Author: Grant Likely <grant.likely@secretlab.ca>
41157 Date:   Tue Jul 3 00:33:23 2007 -0600
41158
41159     Remove obsolete mpc5xx linker scripts
41160
41161     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41162
41163 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
41164 Author: Grant Likely <grant.likely@secretlab.ca>
41165 Date:   Tue Jul 3 00:33:18 2007 -0600
41166
41167     Consolidate mpc83xx linker scripts
41168
41169     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41170
41171 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
41172 Author: Grant Likely <grant.likely@secretlab.ca>
41173 Date:   Tue Jul 3 00:33:13 2007 -0600
41174
41175     Consolidate mpc8260 linker scripts
41176
41177     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41178
41179 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
41180 Author: Grant Likely <grant.likely@secretlab.ca>
41181 Date:   Tue Jul 3 00:33:08 2007 -0600
41182
41183     Consolidate mpc824x linker scripts
41184
41185     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41186
41187 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
41188 Author: Grant Likely <grant.likely@secretlab.ca>
41189 Date:   Tue Jul 3 00:33:03 2007 -0600
41190
41191     Consolidate mpc8220 linker scripts
41192
41193     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41194
41195 commit d181c9a15cd41863fe24840d17848429f27d3c8c
41196 Author: Grant Likely <grant.likely@secretlab.ca>
41197 Date:   Tue Jul 3 00:32:58 2007 -0600
41198
41199     Consolidate mpc5xxx linker scripts
41200
41201     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41202
41203 commit 287ac924adb7291bebe5086652a362a30ab28b13
41204 Author: Grant Likely <grant.likely@secretlab.ca>
41205 Date:   Tue Jul 3 00:32:53 2007 -0600
41206
41207     Consolidate mpc5xx linker scripts
41208
41209     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41210
41211 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
41212 Author: Wolfgang Denk <wd@denx.de>
41213 Date:   Wed Jul 4 00:43:53 2007 +0200
41214
41215     Fix a few file permission problems.
41216
41217     Signed-off-by: Wolfgang Denk <wd@denx.de>
41218
41219 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
41220 Author: Wolfgang Denk <wd@denx.de>
41221 Date:   Wed Jul 4 00:38:38 2007 +0200
41222
41223     Minor coding style cleanup. Rebuild CHANGELOG file.
41224
41225 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
41226 Author: Jon Loeliger <jdl@jdl.com>
41227 Date:   Mon Jun 11 19:03:44 2007 -0500
41228
41229     configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
41230
41231     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41232
41233 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
41234 Author: Jon Loeliger <jdl@jdl.com>
41235 Date:   Mon Jun 11 19:03:39 2007 -0500
41236
41237     README: Rewrite command line config to use CONFIG_CMD_* names.
41238
41239     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41240
41241 commit 72a074cec68e5bad60d63206c050974e08afd804
41242 Author: Jon Loeliger <jdl@jdl.com>
41243 Date:   Mon Jun 11 19:03:34 2007 -0500
41244
41245     include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41246
41247     This is a compatibility step that allows both the older form
41248     and the new form to co-exist for a while until the older can
41249     be removed entirely.
41250
41251     All transformations are of the form:
41252     Before:
41253         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41254     After:
41255         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41256
41257     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41258
41259 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
41260 Author: Jon Loeliger <jdl@jdl.com>
41261 Date:   Mon Jun 11 19:03:28 2007 -0500
41262
41263     tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41264
41265     This is a compatibility step that allows both the older form
41266     and the new form to co-exist for a while until the older can
41267     be removed entirely.
41268
41269     All transformations are of the form:
41270     Before:
41271         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41272     After:
41273         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41274
41275     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41276
41277 commit 9107ebe0d352420895ab69b715697bdebc8caf50
41278 Author: Jon Loeliger <jdl@jdl.com>
41279 Date:   Mon Jun 11 19:03:23 2007 -0500
41280
41281     board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41282
41283     This is a compatibility step that allows both the older form
41284     and the new form to co-exist for a while until the older can
41285     be removed entirely.
41286
41287     All transformations are of the form:
41288     Before:
41289         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41290     After:
41291         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41292
41293     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41294
41295 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
41296 Author: Jon Loeliger <jdl@jdl.com>
41297 Date:   Mon Jun 11 19:03:19 2007 -0500
41298
41299     board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41300
41301     This is a compatibility step that allows both the older form
41302     and the new form to co-exist for a while until the older can
41303     be removed entirely.
41304
41305     All transformations are of the form:
41306     Before:
41307         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41308     After:
41309         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41310
41311     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41312
41313 commit 737184114ec9c9e0ab94d6713536126073bd2472
41314 Author: Jon Loeliger <jdl@jdl.com>
41315 Date:   Mon Jun 11 19:03:15 2007 -0500
41316
41317     cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41318
41319     This is a compatibility step that allows both the older form
41320     and the new form to co-exist for a while until the older can
41321     be removed entirely.
41322
41323     All transformations are of the form:
41324     Before:
41325         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41326     After:
41327         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41328
41329     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41330
41331 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
41332 Author: Jon Loeliger <jdl@jdl.com>
41333 Date:   Mon Jun 11 19:03:08 2007 -0500
41334
41335     cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41336
41337     This is a compatibility step that allows both the older form
41338     and the new form to co-exist for a while until the older can
41339     be removed entirely.
41340
41341     All transformations are of the form:
41342     Before:
41343         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41344     After:
41345         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41346
41347     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41348
41349 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
41350 Author: Jon Loeliger <jdl@jdl.com>
41351 Date:   Mon Jun 11 19:03:03 2007 -0500
41352
41353     lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41354
41355     This is a compatibility step that allows both the older form
41356     and the new form to co-exist for a while until the older can
41357     be removed entirely.
41358
41359     All transformations are of the form:
41360     Before:
41361         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41362     After:
41363         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41364
41365     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41366
41367 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
41368 Author: Jon Loeliger <jdl@jdl.com>
41369 Date:   Mon Jun 11 19:02:58 2007 -0500
41370
41371     lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41372
41373     This is a compatibility step that allows both the older form
41374     and the new form to co-exist for a while until the older can
41375     be removed entirely.
41376
41377     All transformations are of the form:
41378     Before:
41379         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41380     After:
41381         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41382
41383     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41384
41385 commit 98b79003c21c2578206003256de4e781d6b36ca8
41386 Author: Jon Loeliger <jdl@jdl.com>
41387 Date:   Mon Jun 11 19:02:53 2007 -0500
41388
41389     rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41390
41391     This is a compatibility step that allows both the older form
41392     and the new form to co-exist for a while until the older can
41393     be removed entirely.
41394
41395     All transformations are of the form:
41396     Before:
41397         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41398     After:
41399         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41400
41401     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41402
41403 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
41404 Author: Jon Loeliger <jdl@jdl.com>
41405 Date:   Mon Jun 11 19:02:49 2007 -0500
41406
41407     net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41408
41409     This is a compatibility step that allows both the older form
41410     and the new form to co-exist for a while until the older can
41411     be removed entirely.
41412
41413     All transformations are of the form:
41414     Before:
41415         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41416     After:
41417         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41418
41419     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41420
41421 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
41422 Author: Jon Loeliger <jdl@jdl.com>
41423 Date:   Mon Jun 11 19:02:34 2007 -0500
41424
41425     disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41426
41427     This is a compatibility step that allows both the older form
41428     and the new form to co-exist for a while until the older can
41429     be removed entirely.
41430
41431     All transformations are of the form:
41432     Before:
41433         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41434     After:
41435         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41436
41437     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41438
41439 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
41440 Author: Jon Loeliger <jdl@jdl.com>
41441 Date:   Mon Jun 11 19:02:20 2007 -0500
41442
41443     fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41444
41445     This is a compatibility step that allows both the older form
41446     and the new form to co-exist for a while until the older can
41447     be removed entirely.
41448
41449     All transformations are of the form:
41450     Before:
41451         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41452     After:
41453         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41454
41455     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41456
41457 commit d5be43de93ff905c465e509d45a3164ef48d26e7
41458 Author: Jon Loeliger <jdl@jdl.com>
41459 Date:   Mon Jun 11 19:02:10 2007 -0500
41460
41461     drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41462
41463     This is a compatibility step that allows both the older form
41464     and the new form to co-exist for a while until the older can
41465     be removed entirely.
41466
41467     All transformations are of the form:
41468     Before:
41469         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41470     After:
41471         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41472
41473     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41474
41475 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
41476 Author: Jon Loeliger <jdl@jdl.com>
41477 Date:   Mon Jun 11 19:02:05 2007 -0500
41478
41479     common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41480
41481     This is a compatibility step that allows both the older form
41482     and the new form to co-exist for a while until the older can
41483     be removed entirely.
41484
41485     All transformations are of the form:
41486     Before:
41487         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41488     After:
41489         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41490
41491     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41492
41493 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
41494 Author: Jon Loeliger <jdl@jdl.com>
41495 Date:   Mon Jun 11 19:01:54 2007 -0500
41496
41497     common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41498
41499     This is a compatibility step that allows both the older form
41500     and the new form to co-exist for a while until the older can
41501     be removed entirely.
41502
41503     All transformations are of the form:
41504     Before:
41505         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41506     After:
41507         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41508
41509     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41510
41511 commit a76adc8142c1d956385a109e0b70f9319ede4d66
41512 Author: Jon Loeliger <jdl@jdl.com>
41513 Date:   Mon Jun 11 19:01:43 2007 -0500
41514
41515     common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
41516
41517     This is a compatibility step that allows both the older form
41518     and the new form to co-exist for a while until the older can
41519     be removed entirely.
41520
41521     All transformations are of the form:
41522     Before:
41523         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
41524     After:
41525         #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
41526
41527     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41528
41529 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
41530 Author: Jon Loeliger <jdl@jdl.com>
41531 Date:   Mon Jun 11 19:01:34 2007 -0500
41532
41533     Introduce initial versions of new Command Config files.
41534
41535     Derive three new files from cmd_confdefs.h:
41536         config_bootp.h - Has BOOTP related config options, not commands
41537         config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
41538         config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
41539
41540     For now, include "config_bootp.h" for compatability until all
41541     users of it directly include it properly.
41542
41543     Signed-off-by: Jon Loeliger <jdl@freescale.com>
41544
41545 commit 1f2a05898658900dc5717761e27abf2052e67e13
41546 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
41547 Date:   Sat Jun 30 18:50:48 2007 +0200
41548
41549     Fix S-ATA support.
41550
41551     Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
41552
41553 commit a5d71e290f3673269be8eefb4ec44f53412f9461
41554 Author: Heiko Schocher <hs@pollux.denx.de>
41555 Date:   Mon Jun 25 19:11:37 2007 +0200
41556
41557     [PCS440EP]  get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
41558
41559     Signed-off-by: Heiko Schocher <hs@denx.de>
41560
41561 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
41562 Author: Niklaus Giger <niklaus.giger@nestal.com>
41563 Date:   Mon Jun 25 17:03:13 2007 +0200
41564
41565     ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
41566
41567     This patch prints the DDR status registers upon machine check
41568     interrupt on the 440EPx/GRx. This can be useful especially when
41569     ECC support is enabled.
41570
41571     I added some small changes to the original patch from Niklaus to
41572     make it compile clean.
41573
41574     Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
41575     Signed-off-by: Stefan Roese <sr@denx.de>
41576
41577 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
41578 Author: Niklaus Giger <niklaus.giger@nestal.com>
41579 Date:   Mon Jun 25 16:50:55 2007 +0200
41580
41581     ppc4xx: Fix O=buildir builds
41582
41583     This patch fixes the problem to assemble cpu/ppc4xx/start.S
41584     experienced last week where building failed having specified
41585     O=../build.sequoia.
41586
41587     Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
41588
41589 commit 466fff1a7bb5fe764a06450626f6098219f446b8
41590 Author: Stefan Roese <sr@denx.de>
41591 Date:   Mon Jun 25 15:57:39 2007 +0200
41592
41593     ppc4xx: Add pci_pre_init() for 405 boards
41594
41595     This patch removes the CFG_PCI_PRE_INIT option completely, since
41596     it's not needed anymore with the patch from Matthias Fuchs with
41597     the "weak" pci_pre_init() implementation.
41598
41599     Signed-off-by: Stefan Roese <sr@denx.de>
41600
41601 commit 6f35c53166213c24a5a0e2390ed861136ff73870
41602 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41603 Date:   Sun Jun 24 17:41:21 2007 +0200
41604
41605     ppc4xx: Maintenance patch for esd's CPCI405 derivats
41606
41607     -add pci_pre_init() for pci interrupt fixup code
41608     -disable phy sleep mode via reset_phy() function
41609     -use correct io accessors
41610     -cleanup
41611
41612     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41613
41614 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
41615 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41616 Date:   Sun Jun 24 17:23:41 2007 +0200
41617
41618     ppc4xx: Add pci_pre_init() for 405 boards
41619
41620     This patch adds support for calling a plattform dependant
41621     pci_pre_init() function for 405 boards. This can be used to
41622     move the current pci_405gp_fixup_irq() function into the
41623     board code.
41624
41625     This patch also makes the CFG_PCI_PRE_INIT define obsolete.
41626     A default function with 'weak' attribute is used when
41627     a board specific pci_pre_init() is not implemented.
41628
41629     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41630
41631 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
41632 Author: Wolfgang Denk <wd@denx.de>
41633 Date:   Fri Jun 22 23:59:00 2007 +0200
41634
41635     Coding stylke cleanup; rebuild CHANGELOG
41636
41637 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
41638 Author: Igor Lisitsin <igor@emcraft.com>
41639 Date:   Wed Apr 18 14:55:19 2007 +0400
41640
41641     Adapt log buffer code to support Linux 2.6
41642
41643     A new environment variable, "logversion", selects the log buffer
41644     behaviour. If it is not set or set to a value other than 2, then the
41645     old, Linux 2.4.4, behaviour is selected.
41646
41647     Signed-off-by: Igor Lisitsin <igor@emcraft.com>
41648     --
41649
41650 commit a11e06965ec91270c51853407ff1261d3c740386
41651 Author: Igor Lisitsin <igor@emcraft.com>
41652 Date:   Wed Mar 28 19:06:19 2007 +0400
41653
41654     Extend POST support for PPC440
41655
41656     Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
41657
41658     Signed-off-by: Igor Lisitsin <igor@emcraft.com>
41659     --
41660
41661 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
41662 Author: Heiko Schocher <hs@pollux.denx.de>
41663 Date:   Fri Jun 22 19:11:54 2007 +0200
41664
41665     [PCS440EP]      upgrade the PCS440EP board:
41666                     - Show on the Status LEDs, some States of the board.
41667                     - Get the MAC addresses from the EEProm
41668                     - use PREBOOT
41669                     - use the CF on the board.
41670                     - check the U-Boot image in the Flash with a SHA1
41671                       checksum.
41672                     - use dynamic TLB entries generation for the SDRAM
41673
41674     Signed-off-by: Heiko Schocher <hs@denx.de>
41675
41676 commit 3a1f5c81b0b9557817a789bece839905581c2205
41677 Author: Stefan Roese <sr@denx.de>
41678 Date:   Fri Jun 22 16:58:40 2007 +0200
41679
41680     ppc4xx: Fix problem with extended program_tlb() funtion
41681
41682     The recently extended program_tlb() function had a problem when
41683     multiple TLB's had to be setup (for example with 512MB of SDRAM). The
41684     virtual address was not incremented. This patch fixes this issue
41685     and is tested on Katmai with 512MB SDRAM.
41686
41687     Signed-off-by: Stefan Roese <sr@denx.de>
41688
41689 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
41690 Author: Rafal Jaworowski <raj@semihalf.com>
41691 Date:   Fri Jun 22 14:58:04 2007 +0200
41692
41693     [ppc] Fix build breakage for all non-4xx PowerPC variants.
41694
41695     - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
41696     - minor 4xx cleanup
41697
41698 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
41699 Author: Mike Frysinger <vapier@gentoo.org>
41700 Date:   Fri Jun 22 10:34:12 2007 +0200
41701
41702     [patch] add nand_init() prototype to nand.h
41703
41704     since nand_init() is expected to be called by other parts of u-boot, there
41705     should be a prototype for it in nand.h
41706
41707     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
41708     Signed-off-by: Stefan Roese <sr@denx.de>
41709
41710 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
41711 Author: Wolfgang Denk <wd@denx.de>
41712 Date:   Wed Jun 20 18:14:24 2007 +0200
41713
41714     Coding style cleanup. Refresh CHANGELOG.
41715
41716 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
41717 Author: Stefan Roese <sr@denx.de>
41718 Date:   Tue Jun 19 17:22:44 2007 +0200
41719
41720     ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
41721
41722     This patch adds a board command to configure the I2C bootstrap EEPROM
41723     values. Right now 533 and 667MHz are supported for booting either via NOR
41724     or NAND FLASH. Here the usage:
41725
41726     => bootstrap 533 nor        ;to configure the board for 533MHz NOR booting
41727     => bootstrap 667 nand       ;to configure the board for 667MHz NNAND booting
41728
41729     Signed-off-by: Stefan Roese <sr@denx.de>
41730
41731 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
41732 Author: Stefan Roese <sr@denx.de>
41733 Date:   Tue Jun 19 16:42:31 2007 +0200
41734
41735     [ppc4xx] Fix problem with NAND booting on AMCC Acadia
41736
41737     The latest changes showed a problem with the location of the NAND-SPL
41738     image in the OCM and the init-data area (incl. cache). This patch
41739     fixes this problem.
41740
41741     Signed-off-by: Stefan Roese <sr@denx.de>
41742
41743 commit 86ba99e34194394052d24c04dc40d1263d29a26f
41744 Author: Stefan Roese <sr@denx.de>
41745 Date:   Tue Jun 19 16:40:58 2007 +0200
41746
41747     [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
41748
41749     Signed-off-by: Stefan Roese <sr@denx.de>
41750
41751 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
41752 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
41753 Date:   Mon Jun 18 13:50:13 2007 -0500
41754
41755     Added M5329AFEE and M5329BFEE Platforms
41756
41757     Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
41758     drivers/serial,  immap_5329.h, m5329.h, mcfrtc.h,
41759     include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
41760     rtc/mcfrtc.c
41761
41762     Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
41763     common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
41764     include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
41765     include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
41766     include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
41767     lib_m68k/time.c, net/eth.c and rtc/Makefile
41768
41769     Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
41770
41771 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
41772 Author: Michal Simek <monstr@monstr.eu>
41773 Date:   Sun Jun 17 19:04:11 2007 +0200
41774
41775     [fix] email reparation
41776
41777 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
41778 Author: Michal Simek <monstr@monstr.eu>
41779 Date:   Sun Jun 17 19:03:21 2007 +0200
41780
41781     [FIX] fix microblaze file permitission
41782
41783 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
41784 Author: Stefan Roese <sr@denx.de>
41785 Date:   Fri Jun 15 11:33:41 2007 +0200
41786
41787     [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
41788
41789     Now CONFIG_440 has to be defined in all PPC440 board config files.
41790
41791     Signed-off-by: Stefan Roese <sr@denx.de>
41792
41793 commit efa35cf12d914d4caba942acd5a6c45f217de302
41794 Author: Grzegorz Bernacki <gjb@semihalf.com>
41795 Date:   Fri Jun 15 11:19:28 2007 +0200
41796
41797     ppc4xx: Clean up 440 exceptions handling
41798
41799     - Introduced dedicated switches for building 440 and 405 images required
41800       for 440-specific machine instructions like 'rfmci' etc.
41801
41802     - Exception vectors moved to the proper location (_start moved away from
41803       the critical exception handler space, which it occupied)
41804
41805     - CriticalInput now serviced (with default handler)
41806
41807     - MachineCheck properly serviced (added a dedicated handler and return
41808       subroutine)
41809
41810     - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
41811       unhandled and those not relevant for 4xx were eliminated)
41812
41813     - Eliminated Linux leftovers, removed dead code
41814
41815     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
41816     Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
41817     Signed-off-by: Stefan Roese <sr@denx.de>
41818
41819 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
41820 Author: Stefan Roese <sr@denx.de>
41821 Date:   Fri Jun 15 08:18:01 2007 +0200
41822
41823     [ppc4xx] Add initial lwmon5 board support
41824
41825     This patch adds initial support for the Liebherr lwmon5 board euqipped
41826     with an AMCC 440EPx PowerPC.
41827
41828     Signed-off-by: Stefan Roese <sr@denx.de>
41829
41830 commit 85f737376d5ff3d5f0d45a8b657686326d175307
41831 Author: Stefan Roese <sr@denx.de>
41832 Date:   Fri Jun 15 07:39:43 2007 +0200
41833
41834     [ppc4xx] Extend 44x GPIO setup with default output state
41835
41836     The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
41837     is extended with the default GPIO output state (level).
41838
41839     Signed-off-by: Stefan Roese <sr@denx.de>
41840
41841 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
41842 Author: Stefan Roese <sr@denx.de>
41843 Date:   Thu Jun 14 11:14:32 2007 +0200
41844
41845     [ppc4xx] Extend program_tlb() with virtual & physical addresses
41846
41847     Now program_tlb() allows to program a TLB (or multiple) with
41848     different virtual and physical addresses. With this change, now one
41849     physical region (e.g. SDRAM) can be mapped 2 times, once with caches
41850     diabled and once with caches enabled.
41851
41852     Signed-off-by: Stefan Roese <sr@denx.de>
41853
41854 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
41855 Author: Detlev Zundel <dzu@denx.de>
41856 Date:   Wed May 23 19:02:41 2007 +0200
41857
41858     Change 'repeatable' attribute of some commands to sensible values.
41859
41860     Most prominently this changes 'erase' to be non-repeatable.
41861
41862     Signed-off-by: Detlev Zundel <dzu@denx.de>
41863
41864 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
41865 Author: Detlev Zundel <dzu@denx.de>
41866 Date:   Wed May 23 18:47:48 2007 +0200
41867
41868     Fix 'run' not to continue after interrupted command
41869
41870     Signed-off-by: Detlev Zundel <dzu@denx.de>
41871
41872 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
41873 Author: Jason Jin <Jason.jin@freescale.com>
41874 Date:   Mon Jun 11 15:14:24 2007 +0200
41875
41876     USB: This patch fix readl in ohci swap reg access.
41877
41878     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
41879
41880 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
41881 Author: Bartlomiej Sieka <tur@semihalf.com>
41882 Date:   Fri Jun 8 14:52:22 2007 +0200
41883
41884     TQM5200: Add Flat Device Tree support, update default env. accordingly.
41885
41886     Signed-off-by: Jan Wrobel <wrr@semihalf.com>
41887     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
41888
41889 commit 9045f33c023f698660a2e45d1b2194c0711abebc
41890 Author: Wolfgang Denk <wd@denx.de>
41891 Date:   Fri Jun 8 10:24:58 2007 +0200
41892
41893     Fix config problems on SC3 board; make ide_reset_timeout work.
41894
41895 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
41896 Author: Benoît Monin <bmonin@adeneo.eu>
41897 Date:   Fri Jun 8 09:55:24 2007 +0200
41898
41899     [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
41900
41901     Set the correct value in GPIOx_TCR when configuring the gpio
41902     with CFG_440_GPIO_TABLE.
41903
41904     Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
41905     Signed-off-by: Stefan Roese <sr@denx.de>
41906
41907 commit f539edc076cfe52bff919dd512ba8d7af0e22092
41908 Author: Vadim Bendebury <vbendeb@google.com>
41909 Date:   Thu May 24 15:52:25 2007 -0700
41910
41911     cosmetic changes to bcm570x driver
41912
41913     This is a cosmetic only changes submission.
41914     It affects files relevant to bcm570x driver.
41915     the commands used to generate this change was
41916
41917     cd drivers
41918     Lindent -pcs -l80  bcm570x.c   bcm570x_lm.h   bcm570x_mm.h  tigon3.c  tigon3.h
41919
41920     The BMW target (the only one using this chip so far) builds cleanly, the
41921     `before and after' generated object files for drivers/bcm570x.c and
41922     drivers/tigon3.o are identical as reported by objdump -d
41923
41924     Signed-off-by: Vadim Bendebury <vbendeb@google.com>
41925     Signed-off-by: Ben Warren <bwarren@qstreams.com>
41926
41927 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
41928 Author: Wolfgang Denk <wd@denx.de>
41929 Date:   Wed Jun 6 16:26:56 2007 +0200
41930
41931     Coding Style cleanup; generate new CHANGELOG file.
41932
41933     Signed-off-by: Wolfgang Denk <wd@denx.de>
41934
41935 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
41936 Author: Markus Klotzbuecher <mk@denx.de>
41937 Date:   Wed Jun 6 11:49:44 2007 +0200
41938
41939     TRAB, USB: update trab board configuration for use of generic ohci driver
41940
41941 commit dace45acd1c1357daa9322099d07c9a9e08b0024
41942 Author: Markus Klotzbuecher <mk@denx.de>
41943 Date:   Wed Jun 6 11:49:43 2007 +0200
41944
41945     USB: ohci fixes and cleanup for ppc4xx and yosemite board.
41946
41947 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
41948 Author: Markus Klotzbuecher <mk@denx.de>
41949 Date:   Wed Jun 6 11:49:43 2007 +0200
41950
41951     USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
41952
41953 commit fc43be478f2aa37ce38acd85355038866e4162af
41954 Author: Markus Klotzbuecher <mk@denx.de>
41955 Date:   Wed Jun 6 11:49:35 2007 +0200
41956
41957     USB/OHCI: endianness cleanup in the generic ohci driver
41958
41959 commit c440bfe6d6d92d66478a7e84402b31f48413617b
41960 Author: Stefan Roese <sr@denx.de>
41961 Date:   Wed Jun 6 11:42:13 2007 +0200
41962
41963     ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
41964
41965     This patch adds NAND booting support for the AMCC Acadia eval board.
41966
41967     Please make sure to configure jumper J7 to position 2-3 when booting
41968     from NOR, and to position 1-2 when booting for NAND.
41969
41970     I also added a board command to configure the I2C bootstrap EEPROM
41971     values. Right now only 267MHz is support for booting either via NOR
41972     or NAND FLASH. Here the usage:
41973
41974     => bootstrap 267 nor        ;to configure the board for 267MHz NOR booting
41975     => bootstrap 267 nand       ;to configure the board for 267MHz NNAND booting
41976
41977     Signed-off-by: Stefan Roese <sr@denx.de>
41978
41979 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
41980 Author: Rodolfo Giometti <giometti@linux.it>
41981 Date:   Wed Jun 6 10:08:14 2007 +0200
41982
41983     Files include/linux/byteorder/{big,little}_endian.h define
41984     __BIG_ENDIAN and __LITTLE_ENDIAN.
41985
41986     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
41987
41988 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
41989 Author: Zhang Wei <wei.zhang@freescale.com>
41990 Date:   Wed Jun 6 10:08:14 2007 +0200
41991
41992     Add USB PCI-OHCI, USB keyboard and event poll support to the
41993     MPC8641HPCN board config file.
41994
41995     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
41996
41997 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
41998 Author: Zhang Wei <wei.zhang@freescale.com>
41999 Date:   Wed Jun 6 10:08:14 2007 +0200
42000
42001     USB PCI-OHCI, interrupt pipe and usb event poll support
42002
42003     This patch added USB PCI-OHCI chips support, interrupt pipe support
42004     and usb event poll support. For supporting the USB interrupt pipe, the
42005     globe urb_priv is moved to purb in ed struct. Now, we can process
42006     several urbs at one time. The interrupt pipe support codes are ported
42007     from Linux kernel 2.4.
42008
42009     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42010
42011 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
42012 Author: Zhang Wei <wei.zhang@freescale.com>
42013 Date:   Wed Jun 6 10:08:13 2007 +0200
42014
42015     USB event poll support
42016
42017     This patch adds USB event poll support, which could be used in usbkbd
42018     and other usb devices driver when the asynchronous interrupt
42019     processing is supported.
42020
42021     Signed-off-by: Zhang Wei <wei.zhang@freescale.com
42022
42023 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
42024 Author: Rodolfo Giometti <giometti@linux.it>
42025 Date:   Wed Jun 6 10:08:12 2007 +0200
42026
42027     ISP116x: delay for crappy USB keys
42028
42029     Using some (very) slow USB keys cause the USB host controller buffers
42030     are not ready to be read by the CPU so we need an extra delay before
42031     reading the USB storage data.
42032
42033     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
42034
42035 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
42036 Author: Markus Klotzbuecher <mk@denx.de>
42037 Date:   Wed Jun 6 10:08:12 2007 +0200
42038
42039     Change duplicate usb_cpu_init_fail to usb_board_init_fail
42040
42041     Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
42042     this out.
42043
42044     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
42045
42046 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
42047 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
42048 Date:   Tue Jun 5 12:30:52 2007 -0500
42049
42050     mpc8641 image size cleanup
42051
42052     e600 does not have a bootpg restriction.
42053     Move the version string to beginning of image at fff00000.
42054     Resetvec.S is not needed.
42055     Update flash copy instructions.
42056     Add tftpflash env variable
42057
42058     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
42059     Signed-off-by: Jon Loeliger <jdl@freescale.com>
42060
42061 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
42062 Author: Benoît Monin <bmonin@adeneo.eu>
42063 Date:   Mon Jun 4 08:36:05 2007 +0200
42064
42065     [PATCH] Fix ppc4xx bootstrap letter displayed on startup
42066
42067     The attached patch is mainly cosmetic, allowing u-boot to
42068     display the correct bootstrap option letter according to the
42069     datasheets.
42070
42071     The original patch was extended with 405EZ support by Stefan
42072     Roese.
42073
42074     Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
42075     Signed-off-by: Stefan Roese <sr@denx.de>
42076
42077 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
42078 Author: Nikita V. Youshchenko <yoush@debian.org>
42079 Date:   Wed May 23 12:45:19 2007 +0400
42080
42081     fix compilation problem for mpc8349itx CFG_RAMBOOT
42082
42083     Current include/configs/MPC8349ITX.h does contain some support for building
42084     image that will be started from memory (without putting in into flash).
42085     It could be triggered by building with TEXT_BASE set to a low value.
42086
42087     However, this support is incomplete: using of low TEXT_BASE causes
42088     defining configuration macros in inconsistent way, which later leads
42089     to compilation errors. In particular. flash support is being disabled,
42090     but then flash structures get referenced.
42091
42092     This patch fixes this, making it possible to build with low TEXT_BASE.
42093
42094     Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
42095
42096     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42097
42098 commit 8a364f0970de49949d635e60accf463c6443ef8c
42099 Author: Nikita V. Youshchenko <yoush@debian.org>
42100 Date:   Wed May 23 12:45:25 2007 +0400
42101
42102     add missing 'console' var to default mpc8349itx config
42103
42104     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42105
42106 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
42107 Author: Stefan Roese <sr@denx.de>
42108 Date:   Fri Jun 1 16:18:17 2007 +0200
42109
42110     ppc4xx: Add missing file for Bamboo NAND booting support
42111
42112     Signed-off-by: Stefan Roese <sr@denx.de>
42113
42114 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
42115 Author: Stefan Roese <sr@denx.de>
42116 Date:   Fri Jun 1 15:58:19 2007 +0200
42117
42118     ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
42119
42120     This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
42121     suggested by AMCC it is not recommended to dynamically change the EBC
42122     speed after bootup. So we undo this change to be on the safe side.
42123
42124     Signed-off-by: Stefan Roese <sr@denx.de>
42125
42126 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
42127 Author: Stefan Roese <sr@denx.de>
42128 Date:   Fri Jun 1 15:29:04 2007 +0200
42129
42130     ppc4xx: Update Sequoia NAND booting support with ECC
42131
42132     Signed-off-by: Stefan Roese <sr@denx.de>
42133
42134 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
42135 Author: Stefan Roese <sr@denx.de>
42136 Date:   Fri Jun 1 15:27:11 2007 +0200
42137
42138     ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
42139
42140     This patch adds NAND booting support for the AMCC Bamboo eval board.
42141     Since the NAND-SPL boot image is limited to 4kbytes, this version
42142     only supports the onboard 64MBytes of DDR. The DIMM modules can't be
42143     supported, since the setup code for I2C DIMM autodetection and
42144     configuration is too big for this NAND bootloader.
42145
42146     Signed-off-by: Stefan Roese <sr@denx.de>
42147
42148 commit 42be56f53c8b107868e6125c8524ae84293e95a7
42149 Author: Stefan Roese <sr@denx.de>
42150 Date:   Fri Jun 1 15:23:04 2007 +0200
42151
42152     NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
42153
42154     The U-Boot NAND booting support is now extended to support ECC
42155     upon loading of the NAND U-Boot image.
42156
42157     Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
42158
42159     Signed-off-by: Stefan Roese <sr@denx.de>
42160
42161 commit a471db07fbb65a841ffc9f4f112562b945230f98
42162 Author: Stefan Roese <sr@denx.de>
42163 Date:   Fri Jun 1 15:19:29 2007 +0200
42164
42165     ppc4xx: Prepare Bamboo port for NAND booting support
42166
42167     This patch updates the "normal" Bamboo NOR booting port, so
42168     that it is compatible with the coming soon NAND booting
42169     Bamboo port.
42170
42171     It also enables the 2nd NAND flash on the Bamboo.
42172
42173     Signed-off-by: Stefan Roese <sr@denx.de>
42174
42175 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
42176 Author: Stefan Roese <sr@denx.de>
42177 Date:   Fri Jun 1 15:16:58 2007 +0200
42178
42179     ppc4xx: Update in_be32() functions and friends to latest Linux version
42180
42181     Signed-off-by: Stefan Roese <sr@denx.de>
42182
42183 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
42184 Author: Stefan Roese <sr@denx.de>
42185 Date:   Fri Jun 1 15:15:12 2007 +0200
42186
42187     NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
42188
42189     This patch adds hardware ECC support to the NDFC driver. It also
42190     changes the register access from using the "simple" in32/out32
42191     functions to the in_be32/out_be32 functions, which make sure
42192     that the access is correctly synced. This is the only recommended
42193     access to SoC registers in the current Linux kernel.
42194
42195     Signed-off-by: Stefan Roese <sr@denx.de>
42196
42197 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
42198 Author: Stefan Roese <sr@denx.de>
42199 Date:   Fri Jun 1 15:12:15 2007 +0200
42200
42201     NAND: Update nand_ecc.c to latest Linux version
42202
42203     This patch updates the nand_ecc code to the latest Linux version.
42204     The main reason for this is the more compact code. This makes
42205     it possible to include the ECC code into the NAND bootloader
42206     image (NAND_SPL) for PPC4xx.
42207
42208     Signed-off-by: Stefan Roese <sr@denx.de>
42209
42210 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
42211 Author: Stefan Roese <sr@denx.de>
42212 Date:   Fri Jun 1 15:09:50 2007 +0200
42213
42214     ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
42215
42216     Signed-off-by: Stefan Roese <sr@denx.de>
42217
42218 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
42219 Author: Stefan Roese <sr@denx.de>
42220 Date:   Fri Jun 1 13:45:24 2007 +0200
42221
42222     ppc4xx: Change Luan config file to support ECC
42223
42224     With the updated 44x DDR2 driver the Luan board now supports
42225     ECC generation and checking.
42226
42227     Signed-off-by: Stefan Roese <sr@denx.de>
42228
42229 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
42230 Author: Stefan Roese <sr@denx.de>
42231 Date:   Fri Jun 1 13:45:00 2007 +0200
42232
42233     ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
42234
42235     Add config option for 180 degree advance clock control as needed
42236     for the AMCC Luan eval board.
42237
42238     Signed-off-by: Stefan Roese <sr@denx.de>
42239
42240 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
42241 Author: Wolfgang Denk <wd@denx.de>
42242 Date:   Thu May 31 17:20:09 2007 +0200
42243
42244     Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
42245
42246     Signed-off-by: Wolfgang Denk <wd@denx.de>
42247
42248 commit 7049288fb1f16f1b317140226cdebd07bd416395
42249 Author: Bartlomiej Sieka <tur@semihalf.com>
42250 Date:   Sun May 27 17:26:46 2007 +0200
42251
42252     Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
42253
42254     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
42255
42256 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
42257 Author: Bartlomiej Sieka <tur@semihalf.com>
42258 Date:   Sun May 27 17:06:36 2007 +0200
42259
42260     Motion-PRO: Add support for redundant environment.
42261
42262     Enable redundant environment, add a MTD partition for it; also add env.
42263     variable command for passing MTD partitions to the kernel command line.
42264
42265     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
42266     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42267
42268 commit a26eabeec31746f06d309103690892805696e344
42269 Author: Bartlomiej Sieka <tur@semihalf.com>
42270 Date:   Sun May 27 17:05:11 2007 +0200
42271
42272     Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
42273
42274     Allow passing longer command line to the kernel - useful especially
42275     for passing MTD partition layout.
42276
42277     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
42278     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42279
42280 commit 9160b96f71483a116de81c68985e8ee306d36764
42281 Author: Bartlomiej Sieka <tur@semihalf.com>
42282 Date:   Sun May 27 17:04:18 2007 +0200
42283
42284     Fix: Add missing NULL termination in strings expanded by macros parser.
42285
42286     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
42287     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42288
42289 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
42290 Author: Bartlomiej Sieka <tur@semihalf.com>
42291 Date:   Sun May 27 17:03:37 2007 +0200
42292
42293     Motion-PRO: Update EEPROM's page write bits and write delay.
42294
42295     Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
42296     have a page write capability of two bytes", and "This device offers fast (1ms)
42297     byte write". Add 3ms of extra delay.
42298
42299     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
42300     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42301
42302 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
42303 Author: Bartlomiej Sieka <tur@semihalf.com>
42304 Date:   Sun May 27 16:58:45 2007 +0200
42305
42306     MPC5XXX, Motion-PRO: Fix PHY initialization problem.
42307
42308     After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
42309     networking does not function. This commit switches PHY to TX mode by clearing
42310     the FX_SEL bit of Mode Control Register. It also reverses commit
42311     008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
42312
42313     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
42314     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42315
42316 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
42317 Author: Bartlomiej Sieka <tur@semihalf.com>
42318 Date:   Sun May 27 16:57:15 2007 +0200
42319
42320     Motion-PRO: Add support for the temperature sensor.
42321
42322     Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
42323     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42324
42325 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
42326 Author: Bartlomiej Sieka <tur@semihalf.com>
42327 Date:   Sun May 27 16:55:23 2007 +0200
42328
42329     Motion-PRO: Add displaying of CPLD revision information during boot.
42330
42331     Signed-off-by: Jan Wrobel <wrr@semihalf.com>
42332     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42333
42334 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
42335 Author: Bartlomiej Sieka <tur@semihalf.com>
42336 Date:   Sun May 27 16:53:43 2007 +0200
42337
42338     MPC5xxx: Change names of defines related to IPB and PCI clocks.
42339
42340     Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
42341     them does not cause PCI or IPB clocks to run at the specified speed.
42342     Instead, they configure divisors used to calculate said clocks. This
42343     patch renames the defines according to their real function.
42344
42345     Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
42346     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42347
42348 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
42349 Author: Bartlomiej Sieka <tur@semihalf.com>
42350 Date:   Sun May 27 16:51:48 2007 +0200
42351
42352     Motion-PRO: Add LED support.
42353
42354     Signed-off-by: Jan Wrobel <wrr@semihalf.com>
42355     Signed-off-by: Marian Balakowicz <m8@semihalf.com>
42356     Acked-by: Bartlomiej Sieka <tur@semihalf.com>
42357
42358 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
42359 Author: Ulf Samuelsson <ulf@atmel.com>
42360 Date:   Thu May 24 12:12:47 2007 +0200
42361
42362     [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
42363
42364     Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
42365     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42366     Signed-off-by: Stefan Roese <sr@denx.de>
42367
42368 commit d756894722c888d09a9fa1df8323753772d3dcce
42369 Author: Stefan Roese <sr@denx.de>
42370 Date:   Thu May 24 09:49:00 2007 +0200
42371
42372     ppc4xx: Fix small 405EZ OCM initilization bug in start.S
42373
42374     As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
42375     fixes a small bug in the 405EZ OCM initialization. Thanks for
42376     spotting.
42377
42378     Signed-off-by: Stefan Roese <sr@denx.de>
42379
42380 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
42381 Author: Stefan Roese <sr@denx.de>
42382 Date:   Thu May 24 08:22:09 2007 +0200
42383
42384     ppc4xx: Update AMCC Acadia support for board revision 1.1
42385
42386     This patch updates the Acadia (405EZ) support for the new 1.1 board
42387     revision. It also adds support for NAND FLASH via the 4xx NDFC.
42388
42389     Please note that the jumper J7 must be in position 2-3 for this
42390     NAND support. Position 1-2 is for NAND booting only. NAND booting
42391     support will follow later.
42392
42393     Signed-off-by: Stefan Roese <sr@denx.de>
42394
42395 commit 822d55365bb557e084d0e33625a6dedcc866110b
42396 Author: Jon Loeliger <jdl@freescale.com>
42397 Date:   Wed May 23 14:09:46 2007 -0500
42398
42399     Add LIST_86xx MAKEALL target for PowerPC builds.
42400
42401     Signed-off-by: Jon Loeliger <jdl@freescale.com>
42402
42403 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
42404 Author: Stefan Roese <sr@denx.de>
42405 Date:   Tue May 22 12:48:09 2007 +0200
42406
42407     ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
42408
42409     Signed-off-by: Stefan Roese <sr@denx.de>
42410
42411 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
42412 Author: Stefan Roese <sr@denx.de>
42413 Date:   Tue May 22 12:46:10 2007 +0200
42414
42415     ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
42416
42417     This patch adds support for 405 PPC's to the 4xx NAND driver
42418     ndfc.c. This is in preparation for the new AMCC 405EZ.
42419
42420     Signed-off-by: Stefan Roese <sr@denx.de>
42421
42422 commit 10603d76767426be803dadd4fb688b97eb69481c
42423 Author: Stefan Roese <sr@denx.de>
42424 Date:   Mon May 21 07:41:22 2007 +0200
42425
42426     ppc4xx: Fix problem in 405EZ OCM initialization
42427
42428     As spotted by Bruce Adler this patch fixes an initialization problem
42429     for the 405EZ OCM.
42430
42431     Signed-off-by: Stefan Roese <sr@denx.de>
42432
42433 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
42434 Author: Peter Pearse <peter.pearse@arm.com>
42435 Date:   Fri May 18 16:47:03 2007 +0100
42436
42437     Reduce line lengths to 80 characters max.
42438
42439 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
42440 Author: Peter Pearse <peter.pearse@arm.com>
42441 Date:   Fri May 18 14:34:07 2007 +0100
42442
42443     Makefile permissions
42444
42445 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
42446 Author: Peter Pearse <peter.pearse@arm.com>
42447 Date:   Fri May 18 14:33:11 2007 +0100
42448
42449     Makefile permissions
42450
42451 commit 255a3577c848706441daee0174543efe205a77f8
42452 Author: Kim Phillips <kim.phillips@freescale.com>
42453 Date:   Wed May 16 16:52:19 2007 -0500
42454
42455     Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
42456
42457     For all practical u-boot purposes, TSECs don't differ throughout the
42458     mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
42459
42460     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42461
42462 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
42463 Author: Stefano Babic <sbabic@denx.de>
42464 Date:   Wed May 16 14:49:12 2007 +0200
42465
42466     Fix compile problem cause my Microblaze merge
42467
42468     Signed-off-by: Stefano Babic <sbabic@denx.de>
42469
42470 commit ada4697d0230d6da552867777f98a67ec3ba2579
42471 Author: Jeffrey Mann <mannj@embeddedplanet.com>
42472 Date:   Wed May 16 13:23:10 2007 +0200
42473
42474     [PATCH] Run new sequoia boards with an EBC speed of 83MHz
42475
42476     Because the Sequoia board does not boot with an EBC faster than 66MHz,
42477     the clock divider are changed after the initial boot process.
42478
42479     This allows for maximum clocking speeds  to be achieved on newer boards.
42480     Sequoia boards with 666.66 MHz processors require that the EBC divider
42481     be set to 3 in order to start the initial boot process at a slower EBC
42482     speed. After the initial boot process, the divider can be set back to 2,
42483     which will cause the boards to run at 83.333MHz. This is backward
42484     compatible with boards with 533.33 MHz processors, as these boards will
42485     already be set with an EBC divider of 2.
42486
42487     Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
42488
42489 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
42490 Author: Wolfgang Denk <wd@denx.de>
42491 Date:   Wed May 16 01:16:53 2007 +0200
42492
42493     Minor Coding Style cleanup, update CHANGELOG.
42494
42495     Signed-off-by: Wolfgang Denk <wd@denx.de>
42496
42497 commit d62f64cc23a940eafe712c776b3249e4160753d1
42498 Author: Wolfgang Denk <wd@denx.de>
42499 Date:   Wed May 16 00:13:33 2007 +0200
42500
42501     Coding Style Cleanup, new CHANGELOG
42502
42503 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
42504 Author: Wolfgang Denk <wd@denx.de>
42505 Date:   Tue May 15 23:38:05 2007 +0200
42506
42507     Minor coding style cleanup.
42508
42509 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
42510 Author: mushtaq khan <mushtaq_k@procsys.com>
42511 Date:   Fri Apr 20 14:23:02 2007 +0530
42512
42513     Add driver for S-ATA-controller on Intel processors with South
42514     Bridge, ICH-5, ICH-6 and ICH-7.
42515
42516     Implementation:
42517
42518     1. Code is divided in to two files. All functions, which are
42519        controller specific are kept in "drivers/ata_piix.c" file and
42520        functions, which are not controller specific, are kept in
42521        "common/cmd_sata.c" file.
42522
42523     2. Reading and Writing from the S-ATA drive is done using PIO method.
42524
42525     3. Driver can be configured for 48-bit addressing by defining macro
42526        CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
42527        addressing.
42528
42529     4. S-ATA read function is hooked to the File system, commands like
42530        ext2ls and ext2load file can be used. This has been tested.
42531
42532     5. U-Boot command "SATA_init" is added, which initializes the S-ATA
42533        controller and identifies the S-ATA drives connected to it.
42534
42535     6. U-Boot command "sata" is added, which is used to read/write, print
42536        partition table and get info about the drives present. This I have
42537        implemented in same way as "ide" command is implemented in U-Boot.
42538
42539     7. This driver is for S-ATA in native mode.
42540
42541     8. This driver does not support the Native command queuing and
42542        Hot-plugging.
42543
42544     Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
42545
42546 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
42547 Author: mushtaq khan <mushtaq_k@procsys.com>
42548 Date:   Mon Apr 30 15:57:22 2007 +0530
42549
42550     Fixes bug clearing the bss section for i386
42551
42552     Hi,
42553     There is a bug in the code of clearing the bss section for processor
42554     i386.(File: cpu/i386/start.S)
42555     In the code, bss_start addr (starting addr of bss section) is put into
42556     the register %eax, but the code which clears the bss section refers to
42557     the addr pointed by %edi.
42558
42559     This patch fixes this bug by putting bss_start into %edi register.
42560
42561     Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
42562
42563 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
42564 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
42565 Date:   Mon Apr 30 16:47:28 2007 -0500
42566
42567     Add support for BCM5464 Quad Phy
42568
42569     Added support for Broadcom's BCM5464 Quad Phy
42570
42571     Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
42572
42573 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
42574 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
42575 Date:   Wed May 9 08:10:57 2007 +0800
42576
42577     Search the exception table with linear algorithm
42578
42579     Search the exception table with linear algorithm instead of
42580     bisecting algorithm.
42581     Because the exception table might be unsorted.
42582
42583     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
42584
42585 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
42586 Author: Aubrey.Li <aubrey.adi@gmail.com>
42587 Date:   Mon May 14 11:47:35 2007 +0800
42588
42589     Fix compilation issues on MACOSX
42590
42591     Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
42592     Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
42593
42594 commit 56fd7162985c412317bbf763a225fba23c64fd31
42595 Author: Stephen Williams <steve@icarus.com>
42596 Date:   Tue May 15 07:55:42 2007 -0700
42597
42598     Fix for compile of JSE target
42599
42600     The attached patch fixes the compile of the JSE board in the
42601     denx git as of 14 may 2007. It is an extremely simple patch,
42602     it just adds the missing define of CFG_SYSTEMACE_WIDTH.
42603
42604      Fix to compile JSE against 20070514 git of u-boot
42605
42606 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
42607 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
42608 Date:   Sun May 13 21:01:03 2007 +0900
42609
42610     sh: MS7750SE support.
42611
42612     This adds support for the Hitachi MS7750SE.
42613
42614     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42615
42616 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
42617 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
42618 Date:   Sun May 13 20:58:00 2007 +0900
42619
42620     sh: First support code of SuperH.
42621
42622     Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
42623
42624 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
42625 Author: Stefan Roese <sr@denx.de>
42626 Date:   Fri May 11 12:01:49 2007 +0200
42627
42628     ppc4xx: Add mtcpr/mfcpr access macros
42629
42630     Signed-off-by: Stefan Roese <sr@denx.de>
42631
42632 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
42633 Author: Stefan Roese <sr@denx.de>
42634 Date:   Fri May 11 12:01:06 2007 +0200
42635
42636     ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
42637
42638     Signed-off-by: Stefan Roese <sr@denx.de>
42639
42640 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
42641 Author: Piotr Kruszynski <ppk@semihalf.com>
42642 Date:   Thu May 10 16:55:52 2007 +0200
42643
42644     [Motion-PRO] Add MTD and JFFS2 support, also add default partition
42645     definition.
42646
42647 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
42648 Author: Peter Pearse <peter.pearse@arm.com>
42649 Date:   Wed May 9 11:42:44 2007 +0100
42650
42651     Add the board directory for SMN42
42652
42653 commit 160131bf965785419626df6c388729fe0b597992
42654 Author: Peter Pearse <peter.pearse@arm.com>
42655 Date:   Wed May 9 11:41:58 2007 +0100
42656
42657     Add the files for the SMN42 board
42658
42659 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
42660 Author: Peter Pearse <peter.pearse@arm.com>
42661 Date:   Wed May 9 11:40:34 2007 +0100
42662
42663     Remove the deleted files for the SMN42 patch
42664
42665 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
42666 Author: Peter Pearse <peter.pearse@arm.com>
42667 Date:   Wed May 9 11:37:56 2007 +0100
42668
42669     New board SMN42 branch
42670
42671 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
42672 Author: Peter Pearse <peter.pearse@arm.com>
42673 Date:   Wed May 9 10:24:38 2007 +0100
42674
42675     Makefile permissions
42676
42677 commit b84289b595731e8851df46e893845cc1322c9b9b
42678 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
42679 Date:   Tue May 8 14:17:07 2007 -0500
42680
42681     8641hpcn: Fix Makefile after moving pixis to board/freescale.
42682
42683     The OBJTREE != SRCTREE build scenario was broken.
42684     This fixes it.
42685
42686     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
42687     Signed-off-by: Jon Loeliger <jdl@freescale.com>
42688
42689 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
42690 Author: Michal Simek <monstr@monstr.eu>
42691 Date:   Tue May 8 15:57:43 2007 +0200
42692
42693     add: reading special purpose registers
42694
42695 commit 1a50f164beb065f360fbddb76029607d6b099698
42696 Author: Michal Simek <monstr@monstr.eu>
42697 Date:   Tue May 8 14:52:52 2007 +0200
42698
42699     add: Microblaze V5 exception handling
42700
42701 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
42702 Author: Michal Simek <monstr@monstr.eu>
42703 Date:   Tue May 8 14:39:11 2007 +0200
42704
42705     add: FSL control read and write
42706
42707 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
42708 Author: Piotr Kruszynski <ppk@semihalf.com>
42709 Date:   Tue May 8 13:05:44 2007 +0200
42710
42711     [Motion-PRO] Add support for I2C, EEPROM and RTC.
42712
42713 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
42714 Author: Bartlomiej Sieka <tur@semihalf.com>
42715 Date:   Tue May 8 10:23:56 2007 +0200
42716
42717     [Motion-PRO] Add ATA support. Add CF-booting commands to the default
42718     environment.
42719
42720 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
42721 Author: Bartlomiej Sieka <tur@semihalf.com>
42722 Date:   Tue May 8 09:39:12 2007 +0200
42723
42724     [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
42725     eliminates networking problems in Linux (timeouts).
42726
42727 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
42728 Author: Bartlomiej Sieka <tur@semihalf.com>
42729 Date:   Tue May 8 09:21:57 2007 +0200
42730
42731     [Motion-PRO] Enable Flat Device Tree support and modify default environment
42732     to allow booting of FDT-expecting kernels.
42733
42734 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
42735 Author: Michal Simek <monstr@monstr.eu>
42736 Date:   Mon May 7 23:58:31 2007 +0200
42737
42738     new: USE_MSR_INTR support
42739
42740 commit 008861a2f3ef2c062744d733787c7e530a1b8761
42741 Author: Bartlomiej Sieka <tur@semihalf.com>
42742 Date:   Mon May 7 22:36:15 2007 +0200
42743
42744     [MPC5xxx] There are networking problems on the Motion-PRO board with
42745     current PHY initalization code (tftp timeouts all the time). This commit
42746     temporarily disables PHY initalization sequence to make the networking
42747     operational, until a fix is found.
42748
42749 commit abca901869c3760b6c5fecb825db6c1d91a78a93
42750 Author: Wolfgang Denk <wd@denx.de>
42751 Date:   Mon May 7 22:10:36 2007 +0200
42752
42753     Get rid of duplicated file (see include/configs/sbc8560.h instead)
42754
42755     Signed-off-by: Wolfgang Denk <wd@denx.de>
42756
42757 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
42758 Author: Wolfgang Denk <wd@denx.de>
42759 Date:   Mon May 7 22:07:08 2007 +0200
42760
42761     Get rid of duplicated file (see doc/README.SBC8560 instead)
42762
42763     Signed-off-by: Wolfgang Denk <wd@denx.de>
42764
42765 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
42766 Author: Michal Simek <monstr@monstr.eu>
42767 Date:   Mon May 7 19:43:10 2007 +0200
42768
42769     fix: read and write MSR - repair number of parameters
42770
42771 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
42772 Author: Jeffrey Mann <mannj@embeddedplanet.com>
42773 Date:   Mon May 7 19:42:49 2007 +0200
42774
42775     [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
42776
42777     A '3' got cut off in the formatting of the last patch to automatically
42778     change the clock speed of the system clock on sequoia board.
42779
42780     Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
42781     Signed-off-by: Stefan Roese <sr@denx.de>
42782
42783 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
42784 Author: Michal Simek <monstr@monstr.eu>
42785 Date:   Mon May 7 19:33:51 2007 +0200
42786
42787     new: fsl interrupt support
42788     FSL_Has_data is connected to INTC.
42789
42790 commit 792032baa7d625e34c981ab6df521911bd8dc861
42791 Author: Michal Simek <monstr@monstr.eu>
42792 Date:   Mon May 7 19:30:12 2007 +0200
42793
42794     fix: interrupt handler
42795     remove asm code
42796
42797 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
42798 Author: Michal Simek <monstr@monstr.eu>
42799 Date:   Mon May 7 19:25:08 2007 +0200
42800
42801     fix: remove asm code
42802
42803 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
42804 Author: Michal Simek <monstr@monstr.eu>
42805 Date:   Mon May 7 19:12:43 2007 +0200
42806
42807     fix: clean interrupt
42808
42809 commit 42efed6130c8fcf7da881385b5427065d2801757
42810 Author: Michal Simek <monstr@monstr.eu>
42811 Date:   Mon May 7 17:22:25 2007 +0200
42812
42813     fix: interrupt handler for multiple sources
42814
42815 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
42816 Author: Michal Simek <monstr@monstr.eu>
42817 Date:   Mon May 7 17:11:09 2007 +0200
42818
42819     new: add writing to msr register
42820
42821 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
42822 Author: Markus Klotzbuecher <mk@denx.de>
42823 Date:   Mon May 7 16:43:56 2007 +0200
42824
42825     Fix an ancient CHANGELOG conflict
42826
42827 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
42828 Author: Timur Tabi <timur@freescale.com>
42829 Date:   Sat May 5 08:12:30 2007 +0200
42830
42831     5xxx: write MAC address to mac-address and local-mac-address
42832
42833     Some device trees have a mac-address property, some have local-mac-address,
42834     and some have both.  To support all of these device trees, ftp_cpu_setup()
42835     should write the MAC address to mac-address and local-mac-address, if they
42836     exist.
42837
42838     Signed-off-by: Timur Tabi <timur@freescale.com>
42839     Acked-by: Grant Likely <grant.likely@secretlab.ca>
42840
42841 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
42842 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
42843 Date:   Sun Apr 29 14:01:54 2007 +0200
42844
42845     [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
42846
42847     MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
42848     message. Use PVR to distinguish between the two variants, and print proper CPU
42849     information.
42850
42851     Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
42852     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
42853     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42854
42855 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
42856 Author: Ladislav Michl <ladis@linux-mips.org>
42857 Date:   Wed Apr 25 16:01:26 2007 +0200
42858
42859     [PATCH] simplify silent console
42860
42861     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42862     Acked-by: Stefan Roese <sr@denx.de>
42863
42864 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
42865 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
42866 Date:   Mon Apr 23 15:30:39 2007 +0200
42867
42868     [PATCH] Avoid assigning PCI resources from zero address
42869
42870     If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
42871     core complains and IDE drivers fails to work.  Also, assigning zero to a BAR
42872     was illegal according to PCI 2.1 (the later revisions seem to have excluded the
42873     sentence about "0" being considered an invalid address) -- so, use a reasonable
42874     starting value of 0x1000 (that's what the most Linux archs are using).
42875
42876     Alternatively, one might have fixed the calls to pci_set_region() individually
42877     (some code even seems to have taken care of this issue) but that would have
42878     been a lot more work. :-)
42879
42880     Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
42881     Acked-by: Stefan Roese <sr@denx.de>
42882
42883 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
42884 Author: Jeffrey Mann <mannj@embeddedplanet.com>
42885 Date:   Mon Apr 23 14:00:11 2007 +0200
42886
42887     [patch] setenv(...) can delete environmentalvariables
42888
42889     update setenv() function so that entering a NULL value for the
42890     variable's value will delete the environmental variable
42891
42892     Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
42893     Acked-by: Stefan Roese <sr@denx.de>
42894
42895 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
42896 Author: Mike Frysinger <vapier@gentoo.org>
42897 Date:   Mon Apr 23 13:54:24 2007 +0200
42898
42899     [patch] use unsigned char in smc91111 driver for mac
42900
42901     the v_mac variable in the smc91111 driver is declared as a signed char ...
42902     this causes problems when one of the bytes in the MAC is "signed" like 0xE0
42903     because when it gets printed out, you get a display like:
42904     0xFFFFFFE0 and that's no good
42905
42906     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
42907
42908 commit ffc50f9bb194343c6303517a517708457a5eb6b8
42909 Author: Michal Simek <monstr@monstr.eu>
42910 Date:   Sat May 5 18:54:42 2007 +0200
42911
42912     new: FSL and MSR support #2
42913
42914 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
42915 Author: Michal Simek <monstr@monstr.eu>
42916 Date:   Sat May 5 18:27:16 2007 +0200
42917
42918     new: FSL and MSR support
42919
42920 commit 2f15278c2eb911c668b4fe562130b78cf554d139
42921 Author: Wolfgang Denk <wd@denx.de>
42922 Date:   Sat May 5 18:23:11 2007 +0200
42923
42924     Coding stylke cleanup; update CHANGELOG.
42925
42926     Signed-off-by: Wolfgang Denk <wd@denx.de>
42927
42928 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
42929 Author: Wolfgang Denk <wd@denx.de>
42930 Date:   Sat May 5 18:05:02 2007 +0200
42931
42932     Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
42933
42934     Signed-off-by: Wolfgang Denk <wd@denx.de>
42935
42936 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
42937 Author: Wolfgang Denk <wd@denx.de>
42938 Date:   Sat May 5 17:15:50 2007 +0200
42939
42940     Make "file" command happy with some config.mk files; update CHANGELOG
42941
42942 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
42943 Author: Jeffrey Mann <mannj@embeddedplanet.com>
42944 Date:   Sat May 5 08:32:14 2007 +0200
42945
42946     ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
42947
42948     The AMCC Secquoia board has been changed in a new revision from using a
42949     33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
42950     indicates the difference. This patch reads that bit and uses the correct
42951     clock speed for the board. This code is backward compatable will all
42952     prior boards. All prior boards will be read as 33.000.
42953
42954     Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
42955     Signed-off-by: Stefan Roese <sr@denx.de>
42956
42957 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
42958 Author: Stefan Roese <sr@denx.de>
42959 Date:   Sat May 5 08:29:01 2007 +0200
42960
42961     ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
42962
42963     Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
42964     for the 4k NAND boot image so define bus_frequency to 133MHz here
42965     which is save for the refresh counter setup.
42966
42967     Signed-off-by: Stefan Roese <sr@denx.de>
42968
42969 commit 2f550ab976405300f5b07bf2890800840d0aa05f
42970 Author: Timur Tabi <timur@freescale.com>
42971 Date:   Sat May 5 08:12:30 2007 +0200
42972
42973     5xxx: write MAC address to mac-address and local-mac-address
42974
42975     Some device trees have a mac-address property, some have local-mac-address,
42976     and some have both.  To support all of these device trees, ftp_cpu_setup()
42977     should write the MAC address to mac-address and local-mac-address, if they
42978     exist.
42979
42980     Signed-off-by: Timur Tabi <timur@freescale.com>
42981     Acked-by: Grant Likely <grant.likely@secretlab.ca>
42982
42983 commit a79886590593ba1d667c840caa4940c61639f18f
42984 Author: Thomas Knobloch <knobloch@siemens.com>
42985 Date:   Sat May 5 07:04:42 2007 +0200
42986
42987     NAND: Wrong calculation of page number in nand_block_bad()
42988
42989     In case that there is no memory based bad block table available the
42990     function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
42991     nand_block_bad() directly. When parameter 'getchip' is set to zero,
42992     nand_block_bad() will not right shift the offset to calculate the
42993     correct page number.
42994
42995     Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
42996     Signed-off-by: Stefan Roese <sr@denx.de>
42997
42998 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
42999 Author: Wolfgang Denk <wd@denx.de>
43000 Date:   Fri May 4 10:02:33 2007 +0200
43001
43002     Fix initrd length corruption in bootm command.
43003
43004     When using FDT Images, the length of an inital ramdisk was
43005     overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
43006
43007     Patches by Timur Tabi & Johns Daniel.
43008
43009     Signed-off-by: Wolfgang Denk <wd@denx.de>
43010
43011 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
43012 Author: Kim Phillips <kim.phillips@freescale.com>
43013 Date:   Thu May 3 19:43:52 2007 -0500
43014
43015     mpc83xx: fix trivial error in MAKEALL
43016
43017     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43018
43019 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
43020 Author: Wolfgang Denk <wd@denx.de>
43021 Date:   Thu May 3 16:34:41 2007 +0200
43022
43023     Update board configuration for STX GP3SSA board:
43024
43025     Enable hush shell, environment in flash rather in EEPROM,
43026     more user-friendly default environment, etc.
43027     The simple EEPROM environment can be selected easily in the board
43028     config file.
43029
43030     Signed-off-by: Wolfgang Denk <wd@denx.de>
43031
43032 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
43033 Author: Wolfgang Denk <wd@denx.de>
43034 Date:   Tue Apr 24 14:37:49 2007 +0200
43035
43036     Cleanup STX GP3SSA code; fix build and compile problems.
43037
43038 commit 35171dc04e028ecacc23ad916a66295472555dbf
43039 Author: Dan Malek <dan@embeddedalley.com>
43040 Date:   Fri Jan 5 09:15:34 2007 +0100
43041
43042     Add support for STX GP3SSA (stxssa) Board
43043
43044     Signed-off-by Dan Malek, <dan@embeddedalley.com>
43045
43046 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
43047 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43048 Date:   Wed May 2 13:31:53 2007 +0200
43049
43050     macb: Don't restart autonegotiation if we already have link
43051
43052     Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
43053     link is already up.
43054
43055     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43056
43057 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
43058 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43059 Date:   Wed May 2 13:22:38 2007 +0200
43060
43061     macb: Introduce a few barriers when dealing with DMA descriptors
43062
43063     There were a few theoretical possibilities that the compiler might
43064     optimize away DMA descriptor reads and/or writes and thus cause
43065     synchronization problems with the hardware. Insert barriers where
43066     we depend on reads/writes actually hitting memory.
43067
43068     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43069
43070 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
43071 Author: Andy Fleming <afleming@freescale.com>
43072 Date:   Sat Feb 24 01:08:13 2007 -0600
43073
43074     Cleaned up some 85xx PCI bugs
43075
43076     * Cleaned up the CDS PCI Config Tables and added NULL entries to
43077       the end
43078     * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
43079     * Fixed 85xx PCI code to assign powar region sizes based on the
43080       config values (rather than hard-coding them)
43081     * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
43082
43083     Signed-off-by: Andy Fleming <afleming@freescale.com>
43084
43085 commit 6743105988fc44d5b0d30388c790607835aae7a6
43086 Author: Andy Fleming <afleming@freescale.com>
43087 Date:   Mon Apr 23 02:54:25 2007 -0500
43088
43089     Add support for the 8568 MDS board
43090
43091     This included some changes to common files:
43092     * Add 8568 processor SVR to various places
43093     * Add support for setting the qe bus-frequency value in the dts
43094     * Add the 8568MDS target to the Makefile
43095
43096     Signed-off-by: Andy Fleming <afleming@freescale.com>
43097
43098 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
43099 Author: David Updegraff <dave@cray.com>
43100 Date:   Fri Apr 20 14:34:48 2007 -0500
43101
43102     Add support for treating unknown PHYs as generic PHYs.
43103
43104     When bringing up u-boot on new boards, PHY support sometimes gets
43105     neglected.  Most PHYs don't really need any special support,
43106     though.  By adding a generic entry that always matches if nothing
43107     else does, we can provide support for "unsupported" PHYs for the
43108     tsec.
43109
43110     The generic PHY driver supports most PHYs, including gigabit.
43111
43112     Signed-off-by: David Updegraff <dave@cray.com>
43113     Signed-off-by: Andy Fleming <afleming@freescale.com>
43114
43115 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
43116 Author: James Yang <James.Yang@freescale.com>
43117 Date:   Wed Feb 7 15:28:04 2007 -0600
43118
43119     Conditionalize 8641 Rev1.0 MCM workarounds
43120
43121     Signed-off-by: James Yang <James.Yang@freescale.com>
43122     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43123
43124 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
43125 Author: Timur Tabi <timur@freescale.com>
43126 Date:   Mon Apr 30 13:59:50 2007 -0500
43127
43128     Fix memory initialization on MPC8349E-mITX
43129
43130     Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
43131     This allows ddr->sdram_clk_cntl to be properly initialized.  This is necessary
43132     on some ITX boards, notably those with a revision 3.1 CPU.
43133
43134     Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
43135     ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
43136
43137     Signed-off-by: Timur Tabi <timur@freescale.com>
43138     Acked-by: Michael Benedict <MBenedict@twacs.com>
43139     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43140
43141 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
43142 Author: Kim Phillips <kim.phillips@freescale.com>
43143 Date:   Mon Apr 30 15:26:21 2007 -0500
43144
43145     mpc83xx: replace elaborate boottime verbosity with 'clocks' command
43146
43147     and fix CPU: to align with Board: display text.
43148
43149     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43150
43151 commit c1ab82669d9525998c34e802a12cad662723f22a
43152 Author: James Yang <James.Yang@freescale.com>
43153 Date:   Fri Mar 16 13:02:53 2007 -0500
43154
43155     Rewrote picos_to_clk() to avoid rounding errors.
43156     Clarified that conversion is to DRAM clocks rather than platform clocks.
43157     Made function static to spd_sdram.c.
43158
43159     Signed-off-by: James Yang <James.Yang@freescale.com>
43160     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43161
43162 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
43163 Author: Stefan Roese <sr@denx.de>
43164 Date:   Sun Apr 29 14:13:01 2007 +0200
43165
43166     ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
43167
43168     Signed-off-by: Stefan Roese <sr@denx.de>
43169
43170 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
43171 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
43172 Date:   Sun Apr 29 14:01:54 2007 +0200
43173
43174     [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
43175
43176     MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
43177     message. Use PVR to distinguish between the two variants, and print proper CPU
43178     information.
43179
43180     Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
43181     Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
43182     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
43183
43184 commit 5c5d3242935cf3543af01142627494434834cf98
43185 Author: Kim Phillips <kim.phillips@freescale.com>
43186 Date:   Wed Apr 25 12:34:38 2007 -0500
43187
43188     mpc83xx: minor fixups for 8313rdb introduction
43189
43190 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
43191 Author: Ladislav Michl <ladis@linux-mips.org>
43192 Date:   Wed Apr 25 16:01:26 2007 +0200
43193
43194     [PATCH] simplify silent console
43195
43196     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
43197     Acked-by: Stefan Roese <sr@denx.de>
43198
43199 commit 144876a380f5756f57412caf74c1d6dc201dd796
43200 Author: Michal Simek <monstr@monstr.eu>
43201 Date:   Tue Apr 24 23:01:02 2007 +0200
43202
43203     [PATCH] MTD partition support, JFFS2 support
43204
43205 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
43206 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43207 Date:   Tue Apr 24 14:03:45 2007 +0200
43208
43209     ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
43210
43211     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
43212
43213 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
43214 Author: Andy Fleming <afleming@freescale.com>
43215 Date:   Mon Apr 23 02:37:47 2007 -0500
43216
43217     Reworked 85xx speed detection code
43218
43219     Changed the code to read the registers and calculate the clock
43220     rates, rather than using a "switch" statement.
43221
43222     Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
43223
43224     Signed-off-by: Andy Fleming <afleming@freescale.com>
43225
43226 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
43227 Author: Andy Fleming <afleming@freescale.com>
43228 Date:   Mon Apr 23 02:24:28 2007 -0500
43229
43230     Enable 8544 support
43231
43232     * Add support to the Makefile
43233     * Add 8544 configuration support to the tsec driver
43234     * Add 8544 SVR numbers to processor.h
43235
43236     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43237     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43238
43239 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
43240 Author: Andy Fleming <afleming@freescale.com>
43241 Date:   Fri Feb 23 17:12:25 2007 -0600
43242
43243     Support 1G size on 8548
43244
43245     e500v2 and newer cores support 1G page sizes.
43246
43247     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43248     Signed-off-by: Andy Fleming <afleming@freescale.com>
43249
43250 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
43251 Author: Andy Fleming <afleming@freescale.com>
43252 Date:   Fri Feb 23 17:11:16 2007 -0600
43253
43254     Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
43255
43256     The other pagesz constants use one letter to specify order of
43257     magnitude.  Also change the one reference to it in mpc8548cds/init.S
43258
43259     Signed-off-by: Andy Fleming <afleming@freescale.com>
43260
43261 commit 1f9a318cea14272edd10d63739e2d326c90f430e
43262 Author: Andy Fleming <afleming@freescale.com>
43263 Date:   Fri Feb 23 16:28:46 2007 -0600
43264
43265     Only set ddrioovcr for 8548 rev1.
43266
43267     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43268     Signed-off-by: Andy Fleming <afleming@freescale.com>
43269
43270 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
43271 Author: Andy Fleming <afleming@freescale.com>
43272 Date:   Sat Feb 24 01:16:45 2007 -0600
43273
43274     Tweak DDR ECC error counter
43275
43276     Enable single-bit error counter when memory was cleared by ddr controller.
43277
43278     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43279     Signed-off-by: Andy Fleming <afleming@freescale.com>
43280
43281 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
43282 Author: Timur Tabi <timur@freescale.com>
43283 Date:   Mon Feb 12 13:34:55 2007 -0600
43284
43285     85xx: write MAC address to mac-address and local-mac-address
43286
43287     Some device trees have a mac-address property, some have local-mac-address,
43288     and some have both.  To support all of these device trees, ftp_cpu_setup()
43289     should write the MAC address to mac-address and local-mac-address, if they
43290     exist.
43291
43292     Signed-off-by: Timur Tabi <timur@freescale.com>
43293
43294 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
43295 Author: Andy Fleming <afleming@freescale.com>
43296 Date:   Mon Apr 23 01:44:44 2007 -0500
43297
43298     Some 85xx cpu cleanups
43299
43300     * Cleaned up the TSR[WIS] clearing
43301     * Cleaned up DMA initialization
43302
43303     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43304     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43305     Acked-by: Andy Fleming <afleming@freescale.com>
43306
43307 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
43308 Author: Andy Fleming <afleming@freescale.com>
43309 Date:   Mon Apr 23 01:32:22 2007 -0500
43310
43311     Add cpu support for the 8544
43312
43313     Recognize new SVR values, and add a few register definitions
43314
43315     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43316     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43317     Acked-by: Andy Fleming <afleming@freescale.com>
43318
43319 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
43320 Author: Jon Loeliger <jdl@freescale.com>
43321 Date:   Wed Apr 11 16:51:02 2007 -0500
43322
43323     Add MPC8544DS basic port board files.
43324
43325     Add board port under new board/freescale directory
43326     structure and reuse existing PIXIS FPGA support there.
43327
43328     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43329     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43330
43331 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
43332 Author: Jon Loeliger <jdl@freescale.com>
43333 Date:   Wed Apr 11 16:50:57 2007 -0500
43334
43335     Add MPC8544DS main configuration file.
43336
43337     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43338     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43339
43340 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
43341 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
43342 Date:   Wed Dec 27 22:07:15 2006 +0300
43343
43344     Fix PCI I/O space mapping on Freescale MPC85x0ADS
43345
43346     The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
43347     52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
43348     describing the local address window used for the PCI I/O space accesses -- fix
43349     this and carry over the necessary changes into the MPC8560ADS code since the
43350     PCI I/O space mapping was also broken for this board (by the earlier commit
43351     087454609e47295443af793a282cddcd91a5f49c).  Add the comments clarifying how
43352     the PCI I/O space must be mapped to all the MPC85xx board config. headers.
43353
43354     Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
43355
43356      board/mpc8540ads/init.S      |    4 ++--
43357      board/mpc8560ads/init.S      |    4 ++--
43358      include/configs/MPC8540ADS.h |    5 ++---
43359      include/configs/MPC8541CDS.h |    2 +-
43360      include/configs/MPC8548CDS.h |    2 +-
43361      include/configs/MPC8560ADS.h |    8 ++++----
43362      6 files changed, 12 insertions(+), 13 deletions(-)
43363
43364 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
43365 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
43366 Date:   Tue Dec 5 16:42:30 2006 +0800
43367
43368     u-boot: Fix e500 v2 core reset bug
43369
43370     The following patch fixes the e500 v2 core reset bug.
43371     For e500 v2 core, a new reset control register is added to reset the
43372     processor.
43373
43374     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
43375
43376 commit 63247a5acd58032e6cf33f525bc3923b467bac88
43377 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
43378 Date:   Wed Dec 20 11:01:00 2006 +0800
43379
43380     u-boot: v2: Remove the fixed TLB and LAW entrynubmer
43381
43382     Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
43383     entry number to control the loop.  This can reduce the potential risk
43384     for the 85xx processor increasing its TLB adn LAW entry number.
43385
43386     Signed-off-by: Swarthout Edward <swarthout@freescale.com>
43387     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
43388
43389 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
43390 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
43391 Date:   Mon Dec 18 17:01:04 2006 +0800
43392
43393     u-boot: Fix the 85xxcds tsec bug
43394
43395     Fix the 85xxcds tsec bug.
43396     When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
43397
43398     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
43399
43400 commit 7337b237ffc4aaf1b9467024fe472a880d852598
43401 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
43402 Date:   Fri Dec 15 14:43:31 2006 +0800
43403
43404     u-boot: Fix CPU2 errata on MPC8548CDS board
43405
43406     This patch apply workaround of CPU2 errata on MPC8548CDS board.
43407
43408     Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
43409
43410 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
43411 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
43412 Date:   Mon Dec 18 16:25:15 2006 +0800
43413
43414     u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
43415
43416     This patch disables MPC8548CDS 2T_TIMING for DDR by default.
43417
43418     Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
43419
43420 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
43421 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
43422 Date:   Thu Dec 14 14:14:55 2006 +0800
43423
43424     u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
43425
43426     Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
43427     board.
43428     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
43429
43430 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
43431 Author: Scott Wood <scottwood@freescale.com>
43432 Date:   Mon Apr 16 14:54:15 2007 -0500
43433
43434     mpc83xx: Add MPC8313ERDB support.
43435
43436     Signed-off-by: Scott Wood <scottwood@freescale.com>
43437
43438 commit 49ea3b6eafe606285ae4d5c378026153dde53200
43439 Author: Scott Wood <scottwood@freescale.com>
43440 Date:   Mon Apr 16 14:34:21 2007 -0500
43441
43442     mpc83xx: Add generic PCI setup code.
43443
43444     Board code can now request the generic setup code rather than having to
43445     copy-and-paste it for themselves.  Boards should be converted to use this
43446     once they're tested with it.
43447
43448     Signed-off-by: Scott Wood <scottwood@freescale.com>
43449
43450 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
43451 Author: Scott Wood <scottwood@freescale.com>
43452 Date:   Mon Apr 16 14:34:19 2007 -0500
43453
43454     mpc83xx: Add 831x support to speed.c.
43455
43456     Signed-off-by: Scott Wood <scottwood@freescale.com>
43457
43458 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
43459 Author: Scott Wood <scottwood@freescale.com>
43460 Date:   Mon Apr 16 14:34:18 2007 -0500
43461
43462     mpc83xx: Add 831x support to global_data.h
43463
43464     Signed-off-by: Scott Wood <scottwood@freescale.com>
43465
43466 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
43467 Author: Scott Wood <scottwood@freescale.com>
43468 Date:   Mon Apr 16 14:34:16 2007 -0500
43469
43470     mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
43471
43472     Rather than misleadingly define PVR_83xx as the specific type of 83xx
43473     being built for, the PVR of each core revision is defined. checkcpu() now
43474     prints the core that it detects, rather than aborting if it doesn't find
43475     what it thinks it wants.
43476
43477     Signed-off-by: Scott Wood <scottwood@freescale.com>
43478
43479 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
43480 Author: Scott Wood <scottwood@freescale.com>
43481 Date:   Mon Apr 16 14:34:15 2007 -0500
43482
43483     mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
43484
43485     Signed-off-by: Scott Wood <scottwood@freescale.com>
43486
43487 commit d87c57b201b4572d16f1b642998faa00c9912b16
43488 Author: Scott Wood <scottwood@freescale.com>
43489 Date:   Mon Apr 16 14:31:55 2007 -0500
43490
43491     mpc83xx: Add register definitions for MPC831x.
43492
43493     Signed-off-by: Scott Wood <scottwood@freescale.com>
43494
43495 commit 7fc4c71a143be8666d70803fb25ae60379c95622
43496 Author: Stefan Roese <sr@denx.de>
43497 Date:   Mon Apr 23 15:39:59 2007 +0200
43498
43499     Fix file mode
43500
43501     Signed-off-by: Stefan Roese <sr@denx.de>
43502
43503 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
43504 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
43505 Date:   Mon Apr 23 15:30:39 2007 +0200
43506
43507     [PATCH] Avoid assigning PCI resources from zero address
43508
43509     If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
43510     core complains and IDE drivers fails to work.  Also, assigning zero to a BAR
43511     was illegal according to PCI 2.1 (the later revisions seem to have excluded the
43512     sentence about "0" being considered an invalid address) -- so, use a reasonable
43513     starting value of 0x1000 (that's what the most Linux archs are using).
43514
43515     Alternatively, one might have fixed the calls to pci_set_region() individually
43516     (some code even seems to have taken care of this issue) but that would have
43517     been a lot more work. :-)
43518
43519     Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
43520     Acked-by: Stefan Roese <sr@denx.de>
43521
43522 commit afb903a2eb9436baa9270ccc0c27082d86497d89
43523 Author: Jeffrey Mann <mannj@embeddedplanet.com>
43524 Date:   Mon Apr 23 14:00:11 2007 +0200
43525
43526     [patch] setenv(...) can delete environmentalvariables
43527
43528     update setenv() function so that entering a NULL value for the
43529     variable's value will delete the environmental variable
43530
43531     Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
43532     Acked-by: Stefan Roese <sr@denx.de>
43533
43534 commit 36f104e5caa747d568eff26b369565af57c2ffa6
43535 Author: Mike Frysinger <vapier@gentoo.org>
43536 Date:   Mon Apr 23 13:54:24 2007 +0200
43537
43538     [patch] use unsigned char in smc91111 driver for mac
43539
43540     the v_mac variable in the smc91111 driver is declared as a signed char ...
43541     this causes problems when one of the bytes in the MAC is "signed" like 0xE0
43542     because when it gets printed out, you get a display like:
43543     0xFFFFFFE0 and that's no good
43544
43545     Signed-off-by: Mike Frysinger <vapier@gentoo.org>
43546
43547 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
43548 Author: Rodolfo Giometti <giometti@enneenne.com>
43549 Date:   Mon Apr 23 13:10:52 2007 +0200
43550
43551     USB: (Another) delay for crappy USB keys.
43552
43553     Some USB keys are slow in giving back an answer when the Root HUB
43554     enables power lines.
43555
43556     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
43557
43558 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
43559 Author: Stefan Roese <sr@denx.de>
43560 Date:   Mon Apr 23 12:00:22 2007 +0200
43561
43562     Remove BOARDLIBS usage completely
43563
43564     Signed-off-by: Stefan Roese <sr@denx.de>
43565
43566 commit 32556443840f127170e4baa8bdd5b567039f6c36
43567 Author: Michal Simek <monstr@monstr.eu>
43568 Date:   Sat Apr 21 21:07:22 2007 +0200
43569
43570     [PATCH] SystemACE support for Microblaze
43571
43572 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
43573 Author: Michal Simek <monstr@monstr.eu>
43574 Date:   Sat Apr 21 21:02:40 2007 +0200
43575
43576     16bit read/write little endian
43577
43578 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
43579 Author: Michal Simek <monstr@monstr.eu>
43580 Date:   Sat Apr 21 20:53:31 2007 +0200
43581
43582     Change ML401 parameters - Xilinx BSP
43583
43584 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
43585 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
43586 Date:   Wed Feb 28 05:37:29 2007 -0600
43587
43588     mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
43589
43590     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
43591
43592 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
43593 Author: Zhang Wei <wei.zhang@freescale.com>
43594 Date:   Fri Jan 19 10:42:37 2007 +0800
43595
43596     Enable LAWs for MPC8641 PCI-Ex2.
43597
43598     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
43599     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43600
43601 commit bd7851ce1e1f140665b520026abf1042968b1102
43602 Author: Jon Loeliger <jdl@freescale.com>
43603 Date:   Fri Apr 20 14:12:26 2007 -0500
43604
43605     mpc86xx; Write MAC address to mac-address and local-mac-address
43606
43607     Some device trees have a mac-address property, some have local-mac-address,
43608     and some have both.  To support all of these device trees, ftp_cpu_setup()
43609     should write the MAC address to mac-address and local-mac-address, if they
43610     exist.
43611
43612     Signed-off-by: Timur Tabi <timur@freescale.com>
43613     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43614
43615 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
43616 Author: Jon Loeliger <jdl@freescale.com>
43617 Date:   Fri Apr 20 14:11:38 2007 -0500
43618
43619     mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
43620
43621     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
43622     Signed-off-by: Jon Loeliger <jdl@freescale.com>
43623
43624 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
43625 Author: Wolfgang Denk <wd@denx.de>
43626 Date:   Fri Apr 20 17:43:28 2007 +0200
43627
43628     Cleanup compiler warnings, update CHANGELOG
43629
43630     Signed-off-by: Wolfgang Denk <wd@denx.de>
43631
43632 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
43633 Author: Detlev Zundel <dzu@denx.de>
43634 Date:   Fri Apr 20 12:01:47 2007 +0200
43635
43636     Fix breakage of NC650 board with respect to nand support.
43637
43638     Signed-off-by: Detlev Zundel <dzu@denx.de>
43639
43640 commit 39f23cd90947639ac278a18ff277ec786b5ac167
43641 Author: Domen Puncer <domen.puncer@telargo.com>
43642 Date:   Fri Apr 20 11:13:16 2007 +0200
43643
43644     [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
43645
43646     G2 core reference manual says decrementer and time base
43647     are decreasing/increasing once every 4 bus clock cycles.
43648     Lets fix it, so time in Linux won't run twice as fast
43649
43650     Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
43651     Acked-by: Grant Likely <grant.likely@secretlab.ca>
43652
43653 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
43654 Author: Gerald Van Baren <vanbaren@cideas.com>
43655 Date:   Thu Apr 19 23:14:39 2007 -0400
43656
43657     Fix serious pointer bug with bootm and reserve map.
43658
43659     What was suppose to be a stack variable was declared as a pointer,
43660       overwriting random memory.
43661     Also moved the libfdt.a requirement into the main Makefile.  That is
43662       The U-Boot Way.
43663
43664 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
43665 Author: Stefan Roese <sr@denx.de>
43666 Date:   Thu Apr 19 09:53:52 2007 +0200
43667
43668     ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
43669
43670     Previous versions used full wait states for the chip select #1 which
43671     is connected to the Xilinix SystemACE controller on the AMCC Katmai
43672     evaluation board. This leads to really slow access and therefore low
43673     performance. This patch now sets up the chip select a lot faster
43674     resulting in much better read/write performance of the Linux driver.
43675
43676     Signed-off-by: Stefan Roese <sr@denx.de>
43677
43678 commit 37837828d89084879bee2f2b8c7c68d4695940df
43679 Author: Wolfgang Denk <wd@denx.de>
43680 Date:   Wed Apr 18 17:49:29 2007 +0200
43681
43682     Clenaup, update CHANGELOG
43683
43684     Signed-off-by: Wolfgang Denk <wd@denx.de>
43685
43686 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
43687 Author: Wolfgang Denk <wd@denx.de>
43688 Date:   Wed Apr 18 17:20:58 2007 +0200
43689
43690     Update CHANGELOG
43691
43692     Signed-off-by: Wolfgang Denk <wd@denx.de>
43693
43694 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
43695 Author: Wolfgang Denk <wd@denx.de>
43696 Date:   Wed Apr 18 17:07:26 2007 +0200
43697
43698     Cleanup, update CHANGELOG
43699
43700     Sigend-off-by: Wolfgang Denk <wd@denx.de>
43701
43702 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
43703 Author: Wolfgang Denk <wd@denx.de>
43704 Date:   Wed Apr 18 16:17:46 2007 +0200
43705
43706     Update CHANGELOG
43707
43708 commit ad4eb555671d97f96dc56eab55103b1f86874b01
43709 Author: Wolfgang Denk <wd@denx.de>
43710 Date:   Wed Apr 18 14:30:39 2007 +0200
43711
43712     MCC200 board: remove warning which is obsolete after PSoC firmware changes
43713
43714     Signed-off-by: Wolfgang Denk <wd@denx.de>
43715
43716 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
43717 Author: Domen Puncer <domen.puncer@telargo.com>
43718 Date:   Wed Apr 18 12:11:05 2007 +0200
43719
43720     [PATCH] icecube/lite5200b: document wakeup from low-power support
43721
43722     Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
43723
43724 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
43725 Author: Stefan Roese <sr@denx.de>
43726 Date:   Wed Apr 18 12:07:47 2007 +0200
43727
43728     ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
43729
43730     Signed-off-by: Stefan Roese <sr@denx.de>
43731
43732 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
43733 Author: Stefan Roese <sr@denx.de>
43734 Date:   Wed Apr 18 12:05:59 2007 +0200
43735
43736     ppc4xx: Add output for bootrom location to 405EZ ports
43737
43738     Now 405EZ ports also show upon bootup from which boot device
43739     they are configured to boot:
43740
43741     U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
43742
43743     CPU:   AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
43744            Bootstrap Option E - Boot ROM Location EBC (32 bits)
43745            16 kB I-Cache 16 kB D-Cache
43746     Board: Acadia - AMCC PPC405EZ Evaluation Board
43747
43748     Signed-off-by: Stefan Roese <sr@denx.de>
43749
43750 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
43751 Author: Peter Pearse <peter.pearse@arm.com>
43752 Date:   Tue Apr 17 13:30:33 2007 +0100
43753
43754     Move ppearse to ARM board list
43755     Add Konstantin Kletschke for scb9328.
43756     Signed-off-by: Peter Pearse <peter.pearse@arm.com>
43757
43758 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
43759 Author: Domen Puncer <domen.puncer@telargo.com>
43760 Date:   Mon Apr 16 14:00:13 2007 +0200
43761
43762     [PATCH] icecube/lite5200b: wakeup from low-power support
43763
43764     U-Boot part of Lite5200b low power mode support.
43765     Puts SDRAM out of self-refresh and transfers control to
43766     address saved at physical 0x0.
43767
43768     Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
43769     Acked-by: Grant Likely <grant.likely@secretlab.ca>
43770
43771 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
43772 Author: Gerald Van Baren <vanbaren@cideas.com>
43773 Date:   Sun Apr 15 13:54:26 2007 -0400
43774
43775     Fix the ft_cpu_setup() property settings.
43776
43777     Use "setter" functions instead of flags, cleaner and more flexible.
43778     It also fixes the problem noted by Timur Tabi that the ethernet MAC
43779     addresses were all being set incorrectly to the same MAC address.
43780
43781 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
43782 Author: Gerald Van Baren <vanbaren@cideas.com>
43783 Date:   Sat Apr 14 22:51:24 2007 -0400
43784
43785     Improve the bootm command for CONFIG_OF_LIBFDT
43786
43787     In bootm, create the "/chosen" node only if it doesn't already exist
43788       (better matches the previous behavior).
43789     Update for proper reserved memory map handling for initrd.
43790
43791 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
43792 Author: Gerald Van Baren <vanbaren@cideas.com>
43793 Date:   Sat Apr 14 22:46:41 2007 -0400
43794
43795     Add some utilities to manipulate the reserved memory map.
43796
43797 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
43798 Author: Wolfgang Denk <wd@denx.de>
43799 Date:   Sat Apr 14 21:16:54 2007 +0200
43800
43801     Update CHANGELOG
43802
43803 commit 8e6875183cdca91c134408d119d4abcd48ef6856
43804 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43805 Date:   Sun Dec 17 18:56:46 2006 +0100
43806
43807     AVR32: Enable MMC support
43808
43809     Set up the portmux for the MMC interface and enable the MMC driver
43810     along with support for DOS partitions, ext2 and FAT filesystems.
43811
43812     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43813
43814 commit fc26c97bb6df41b4a95662c34054fe912387bf38
43815 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43816 Date:   Fri Jan 20 10:03:53 2006 +0100
43817
43818     Atmel MCI driver
43819
43820     Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
43821
43822     The AT91 ARM-based CPUs use basically the same hardware, so it should
43823     be possible to share this driver, but no effort has been made so far.
43824
43825     Hardware documentation can be found in the AT32AP7000 data sheet,
43826     which can be downloaded from
43827
43828     http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
43829
43830     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43831
43832 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
43833 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43834 Date:   Sun Dec 17 18:55:37 2006 +0100
43835
43836     AVR32: Add clk and gpio infrastructure for mmci
43837
43838     Implement functions for configuring the mmci pins, as well as
43839     functions for getting the clock rate of the mmci controller.
43840
43841     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43842
43843 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
43844 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43845 Date:   Sun Dec 17 18:53:56 2006 +0100
43846
43847     Enable partition support with MMC
43848
43849     Include implementations of init_part() and get_partition_info() when
43850     CONFIG_MMC is set.
43851
43852     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43853
43854 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
43855 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43856 Date:   Sun Dec 17 17:14:30 2006 +0100
43857
43858     AVR32: Enable networking
43859
43860     Implement MACB initialization for AVR32 and ATSTK1000, and turn
43861     everything on, including the MACB driver.
43862
43863     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43864
43865 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
43866 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43867 Date:   Fri Jan 20 10:03:34 2006 +0100
43868
43869     Atmel MACB ethernet driver
43870
43871     Driver for the Atmel MACB on-chip ethernet controller.
43872
43873     This driver has been tested on the ATSTK1000 board with a AT32AP7000
43874     CPU. It should probably work on AT91SAM926x as well with some minor
43875     modifications.
43876
43877     Hardware documentation can be found in the AT32AP7000 data sheet,
43878     which can be downloaded from
43879
43880     http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
43881
43882     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43883
43884 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
43885 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43886 Date:   Sun Dec 17 16:56:14 2006 +0100
43887
43888     AVR32: Add clk and gpio infrastructure for macb0 and macb1
43889
43890     Implement functions for configuring the macb0 and macb1 pins, as
43891     well as functions for getting the clock rate of the various
43892     busses the macb ethernet controllers are connected to.
43893
43894     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43895
43896 commit d5acb95b16a0a74c643524342c3437e765426d05
43897 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43898 Date:   Sun Dec 17 15:39:15 2006 +0100
43899
43900     AVR32: Implement simple DMA memory allocator
43901
43902     Implement dma_alloc_coherent() which returns cache-aligned
43903     uncacheable memory.
43904
43905     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43906
43907 commit 91975b0fea773c9e681fea8cf3349669f27685ee
43908 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43909 Date:   Sun Dec 17 15:46:02 2006 +0100
43910
43911     Import <linux/mii.h> from the Linux kernel
43912
43913     Instead of creating yet another set of MII register definitions
43914     in the macb driver, here's a complete set of definitions for everyone
43915     to use.
43916
43917     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43918
43919 commit 1b804b229556a4d862da93c0ec94e79419364b2c
43920 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43921 Date:   Wed Mar 21 19:47:36 2007 +0100
43922
43923     AVR32: Include more commands for ATSTK1000
43924
43925     Include the imi, imls and jffs commands sets by default on ATSTK1000.
43926     Also define CONFIG_BOOTARGS to something more useful, define
43927     CONFIG_BOOTCOMMAND and enable autoboot by default.
43928
43929     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43930
43931 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
43932 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43933 Date:   Wed Mar 21 19:44:48 2007 +0100
43934
43935     AVR32: Provide a definition of struct stat
43936
43937     Copy the definition of struct stat from the Linux kernel.
43938
43939     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43940
43941 commit 12f099c08167a7a51aeee623bc16dafd0841271c
43942 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43943 Date:   Sun Dec 17 14:46:06 2006 +0100
43944
43945     AVR32: Use initdram() instead of board_init_memories()
43946
43947     Conform to the "standard" interface and use initdram() instead of
43948     board_init_memories() on AVR32. This enables us to get rid of the
43949     sdram_size member of the global_data struct as well.
43950
43951     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43952
43953 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
43954 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43955 Date:   Mon Nov 20 15:53:10 2006 +0100
43956
43957     AVR32: Relocate u-boot to SDRAM
43958
43959     Relocate the u-boot image into SDRAM like everyone else does. This
43960     means that we can handle much larger .data and .bss than we used to.
43961
43962     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43963
43964 commit df548d3c3e2bbc40258713167859ffc2ce99a900
43965 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43966 Date:   Sun Nov 19 18:06:53 2006 +0100
43967
43968     AVR32: Resource management rewrite
43969
43970     Rewrite the resource management code (i.e. I/O memory, clock gating,
43971     gpio) so it doesn't depend on any global state. This is necessary
43972     because this code is heavily used before relocation to RAM, so we
43973     can't write to any global variables.
43974
43975     As an added bonus, this makes u-boot's memory footprint a bit smaller,
43976     although some functionality has been left out; all clocks are enabled
43977     all the time, and there's no checking for gpio line conflicts.
43978
43979     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43980
43981 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
43982 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43983 Date:   Sat Nov 18 18:01:13 2006 +0100
43984
43985     AVR32: Clean up memory-map.h for at32ap7000
43986
43987     Convert spaces to tabs (must have missed this one last time around),
43988     sort the entries by address and group them together by bus
43989     connectivity.
43990
43991     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43992
43993 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
43994 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43995 Date:   Sat Nov 18 17:32:31 2006 +0100
43996
43997     AVR32: Build position-independent u-boot
43998
43999     Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
44000     position independent. This will make relocation a lot easier.
44001
44002     -mno-init-got means that gcc shouldn't emit code to load the GOT
44003     address into r6 in every function prologue. We do it once and for
44004     all in the early startup assembly code, so enabling this option
44005     makes u-boot a bit faster and smaller.
44006
44007     The assembly parts have always been position-independent, so no code
44008     changes should be necessary.
44009
44010     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44011
44012 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
44013 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44014 Date:   Sat Nov 18 17:24:31 2006 +0100
44015
44016     AVR32: Use avr32-linux- cross-compilation prefix by default
44017
44018     It doesn't really matter which toolchain you use to compile u-boot,
44019     but the avr32-linux one is probably what most people have installed.
44020
44021     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44022
44023 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
44024 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
44025 Date:   Sat Nov 18 17:15:30 2006 +0100
44026
44027     AVR32: Split start_u_boot into board_init_f and board_init_r
44028
44029     Split the avr32 initialization code into a function to run before
44030     relocation, board_init_f and a function to run after relocation,
44031     board_init_r. For now, board_init_f simply calls board_init_r
44032     at the end.
44033
44034     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
44035
44036 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
44037 Author: Heiko Schocher <hs@pollux.denx.de>
44038 Date:   Sat Apr 14 05:26:48 2007 +0200
44039
44040     [Fix]       Set the LED status register on the UC101 for the LXT971 PHY.
44041             clear the Display after reset.
44042
44043     Signed-off-by: Heiko Schocher <hs@denx.de>
44044
44045 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
44046 Author: Denis Peter <d.peter@mpl.ch>
44047 Date:   Fri Apr 13 09:13:33 2007 +0200
44048
44049     [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
44050
44051     Fix bug introduced by "Fix get_partition_info() parameter error in all
44052     other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
44053     to use diskboot or scsiboot form another device than 0.
44054
44055     Signed-off-by: Denis Peter <d.peter@mpl.ch>
44056
44057 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
44058 Author: Greg Lopp <lopp@pobox.com>
44059 Date:   Fri Apr 13 08:02:24 2007 +0200
44060
44061     [PATCH] Fix use of "void *" for block dev read/write buffer pointers
44062
44063     Signed-of-by: Greg Lopp <lopp@pobox.com>
44064     Acked-by: Grant Likely <grant.likely@secretlab.ca>
44065
44066 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
44067 Author: Xie Xiaobo <r63061@freescale.com>
44068 Date:   Fri Mar 9 19:08:25 2007 +0800
44069
44070     Fix two bugs for MPC83xx DDR2 controller SPD Init
44071
44072     There are a few bugs in the cpu/mpc83xx/spd_sdram.c
44073     the first bug is that the picos_to_clk routine introduces a huge
44074     rounding error in 83xx.
44075     the second bug is that the mode register write recovery field is
44076     tWR-1, not tWR >> 1.
44077
44078 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
44079 Author: Jeffrey Mann <mannj@embeddedplanet.com>
44080 Date:   Thu Apr 12 14:15:59 2007 +0200
44081
44082     ppc4xx: Fix i2c divisor calcularion for PPC4xx
44083
44084     This patch fixes changes the i2c_init(...) function to use the function
44085     get_OPB_freq() rather than calculating the OPB speed by
44086     sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
44087     specific per processor. The prior method was not and so was calculating
44088     the wrong speed for some PPC4xx processors.
44089
44090     Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
44091     Signed-off-by: Stefan Roese <sr@denx.de>
44092
44093 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
44094 Author: Wolfgang Denk <wd@denx.de>
44095 Date:   Wed Apr 11 17:25:01 2007 +0200
44096
44097     Update CHANGELOG
44098
44099     Signed-off-by: Wolfgang Denk <wd@denx.de>
44100
44101 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
44102 Author: Wolfgang Denk <wd@denx.de>
44103 Date:   Wed Apr 11 17:22:55 2007 +0200
44104
44105     Update for SC3 board
44106
44107     * Make IDE timeout configurable through ide_reset_timeout variable.
44108     * Use Newline as "password" string
44109     * Use just a single partition in NAND flash
44110
44111 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
44112 Author: Haiying Wang <haiying.wang@freescale.com>
44113 Date:   Mon Jan 22 12:37:30 2007 -0600
44114
44115     Add PIXIS FPGA support for MPC8641HPCN board.
44116
44117     Move the 8641HPCN's PIXIS code to the new directory
44118     board/freescale/common/ as it will be shared by
44119     future boards not in the same processor family.
44120
44121     Write a "pixis_reset" command that utilizes the FPGA
44122     reset sequencer to support alternate soft-reset options
44123     such as using the "alternate" flash bank, enabling
44124     the watch dog, or choosing different CPU frequencies.
44125
44126     Add documentation for the pixis_reset to README.mpc8641hpcn.
44127
44128     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
44129     Signed-off-by: Jon Loeliger <jdl@freescale.com>
44130
44131 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
44132 Author: Gerald Van Baren <vanbaren@cideas.com>
44133 Date:   Fri Apr 6 14:19:43 2007 -0400
44134
44135     Moved fdt command support code to fdt_support.c
44136
44137     ...in preparation for improving the bootm command's handling of fdt blobs.
44138     Also cleaned up some coding sloppiness.
44139
44140 commit 6679f9299534e488a171a9bb8f9bb891de247aab
44141 Author: Gerald Van Baren <vanbaren@cideas.com>
44142 Date:   Fri Apr 6 14:17:14 2007 -0400
44143
44144     libfdt: Make fdt_check_header() public
44145
44146     Changed _fdt_check_header() to fdt_check_header() and made it part of
44147     the interface - it is a useful routine.
44148
44149     Also did some asthetics cleanup to the include files (headers).
44150
44151 commit c0707ce65677650b5ceab0500ee50ae5168afef2
44152 Author: Aubrey Li <aubrey.adi@gmail.com>
44153 Date:   Thu Apr 5 18:34:06 2007 +0800
44154
44155     [Blackfin][PATCH] Kill off a bunch of common local prototypes
44156
44157 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
44158 Author: Aubrey Li <aubrey.adi@gmail.com>
44159 Date:   Thu Apr 5 18:33:04 2007 +0800
44160
44161     [Blackfin][PATCH] Fix dynamic CPLB generation issue
44162
44163 commit 0445e3a264251d75b1be45ef713c70726a2952f0
44164 Author: Aubrey Li <aubrey.adi@gmail.com>
44165 Date:   Thu Apr 5 18:31:47 2007 +0800
44166
44167     [Blackfin][PATCH] minior cleanup
44168
44169 commit 155fd766573981090e638b493d5857562151862e
44170 Author: Aubrey Li <aubrey.adi@gmail.com>
44171 Date:   Thu Apr 5 18:31:18 2007 +0800
44172
44173     [Blackfin][PATCH] Fix copyright and update license
44174
44175 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
44176 Author: Aubrey Li <aubrey.adi@gmail.com>
44177 Date:   Thu Apr 5 18:30:25 2007 +0800
44178
44179     [Blackfin][PATCH] Add BF537 EMAC driver initialization
44180
44181 commit 889256e8604e0c68db1d866d720894dffede9df6
44182 Author: Aubrey Li <aubrey.adi@gmail.com>
44183 Date:   Thu Apr 5 18:29:55 2007 +0800
44184
44185     [Blackfin][PATCH] call real the system synchronize instruction
44186
44187 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
44188 Author: Aubrey Li <aubrey.adi@gmail.com>
44189 Date:   Thu Apr 5 18:29:17 2007 +0800
44190
44191     [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
44192
44193 commit dfeeab2cd680df047e68e723b246adf6f33bb556
44194 Author: Aubrey Li <aubrey.adi@gmail.com>
44195 Date:   Thu Apr 5 18:28:34 2007 +0800
44196
44197     [Blackfin][PATCH]: fix flash unaligned copy issue
44198
44199 commit 443feb740584e406efa203af909fe2926608e8d5
44200 Author: Igor Marnat <marny@rambler.ru>
44201 Date:   Wed Mar 21 09:55:01 2007 +0300
44202
44203     Update usage of 'nc' in README.NetConsole
44204
44205     Added information about usage of NetConsole on systems where the -l and -p
44206     switches are mutually exclusive.
44207
44208     Signed-off-by: Igor Marnat <marny@rambler.ru>
44209     Signed-off-by: Ben Warren <bwarren@qstreams.com>
44210
44211 commit 31c98a88228021b314c89ebb8104fb6473da4471
44212 Author: Wolfgang Denk <wd@denx.de>
44213 Date:   Wed Apr 4 02:09:30 2007 +0200
44214
44215     Minor coding style cleanup.
44216
44217 commit 94abd7c0583ebe01e799b25f451201deeaab550d
44218 Author: Wolfgang Denk <wd@denx.de>
44219 Date:   Wed Apr 4 01:49:15 2007 +0200
44220
44221     Minor cleanup.
44222
44223 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
44224 Author: Rodolfo Giometti <giometti@enneenne.com>
44225 Date:   Tue Apr 3 14:27:18 2007 +0200
44226
44227     Support for the Philips ISP116x HCD (Host Controller Driver)
44228
44229     Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
44230
44231 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
44232 Author: Markus Klotzbuecher <mk@denx.de>
44233 Date:   Tue Apr 3 14:27:08 2007 +0200
44234
44235     USB: cleanup monahans usb support. Remove dead code.
44236
44237     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
44238
44239 commit a65c5768e5537530bd1780af3d3fddc3113a163c
44240 Author: Stefan Roese <sr@denx.de>
44241 Date:   Mon Apr 2 10:09:30 2007 +0200
44242
44243     ppc4xx: Change SysACE address on Katmai
44244
44245     With this new base address of the Xilinx SystemACE controller
44246     the Linux driver will be easier to adapt, since it can now be
44247     mapped via the "normal" ioremap() call.
44248
44249     Signed-off-by: Stefan Roese <sr@denx.de>
44250
44251 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
44252 Author: Gerald Van Baren <vanbaren@cideas.com>
44253 Date:   Sat Mar 31 14:30:53 2007 -0400
44254
44255     Fix some minor whitespace violations.
44256
44257 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
44258 Author: Gerald Van Baren <vanbaren@cideas.com>
44259 Date:   Sat Mar 31 12:23:51 2007 -0400
44260
44261     Add a flattened device tree (fdt) command (2 of 2)
44262
44263     Modifications to the existing code to support the new fdt command.
44264
44265 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
44266 Author: Gerald Van Baren <vanbaren@cideas.com>
44267 Date:   Sat Mar 31 12:22:10 2007 -0400
44268
44269     Add a flattened device tree (fdt) command (1 of 2)
44270
44271     The fdt command uses David Gibson's libfdt library to manipulate as well
44272     as print the flattened device tree.  This patch is the new command,
44273     the second part is the modifications to the existing code.
44274
44275 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
44276 Author: Gerald Van Baren <vanbaren@cideas.com>
44277 Date:   Sat Mar 31 12:13:43 2007 -0400
44278
44279     libfdt: Enhanced and published fdt_next_tag()
44280
44281     Enhanced the formerly private function _fdt_next_tag() to allow stepping
44282       through the tree, used to produce a human-readable dump, and made
44283       it part of the published interface.
44284     Also added some comments.
44285
44286 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
44287 Author: Gerald Van Baren <vanbaren@cideas.com>
44288 Date:   Sat Mar 31 12:05:39 2007 -0400
44289
44290     libfdt: Customizations for use by u-boot.
44291
44292     Changes to David Gibson's original source to fit into u-boot's
44293     environment.  No functionality changes.
44294
44295 commit 35748177c64a4a83a00057e93bb33e40278a2a96
44296 Author: Gerald Van Baren <vanbaren@cideas.com>
44297 Date:   Sat Mar 31 12:00:56 2007 -0400
44298
44299     libfdt: Import libfdt source (2 of 2)
44300
44301     This adds the applicable libfdt source files (unmodified) and a README
44302     to explain where the source came from.
44303
44304 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
44305 Author: Gerald Van Baren <vanbaren@cideas.com>
44306 Date:   Sat Mar 31 11:59:59 2007 -0400
44307
44308     libfdt: Import libfdt source (1 of 2)
44309
44310     This adds the applicable libfdt source files (unmodified) and a README
44311     to explain where the source came from.
44312
44313 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
44314 Author: Stefan Roese <sr@denx.de>
44315 Date:   Sat Mar 31 13:16:23 2007 +0200
44316
44317     ppc4xx: Update Katmai bootstrap command
44318
44319     Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
44320     is selected.
44321
44322     Signed-off-by: Stefan Roese <sr@denx.de>
44323
44324 commit cabee756a6532986729477c3cc1ea16ef8517ad2
44325 Author: Stefan Roese <sr@denx.de>
44326 Date:   Sat Mar 31 13:15:06 2007 +0200
44327
44328     ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
44329
44330     Additional RAM information is now printed upon powerup, like
44331     DDR2 frequency and CAS latency.
44332
44333     Signed-off-by: Stefan Roese <sr@denx.de>
44334
44335 commit 60723803431ac75cad085690789e433d5ab9174e
44336 Author: Stefan Roese <sr@denx.de>
44337 Date:   Sat Mar 31 08:48:36 2007 +0200
44338
44339     ppc4xx: Change Yucca config file to support ECC
44340
44341     With the updated 44x DDR2 driver the Yucca board now supports
44342     ECC generation and checking.
44343
44344     Signed-off-by: Stefan Roese <sr@denx.de>
44345
44346 commit 490e5730c674b20d708b783a2c5ffd7208f83873
44347 Author: Stefan Roese <sr@denx.de>
44348 Date:   Sat Mar 31 08:47:34 2007 +0200
44349
44350     ppc4xx: Fix "bootstrap" command for Katmai board
44351
44352     The board specific "bootstrap" command is now fixed and can
44353     be used for the AMCC Katmai board to configure different
44354     CPU/PLB/OPB frequencies.
44355
44356     Signed-off-by: Stefan Roese <sr@denx.de>
44357
44358 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
44359 Author: Stefan Roese <sr@denx.de>
44360 Date:   Sat Mar 31 08:46:08 2007 +0200
44361
44362     ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
44363
44364     Fix a bug in the auto calibration routine. This driver now runs
44365     more reliable with the tested modules. It's also tested with
44366     167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
44367
44368     Signed-off-by: Stefan Roese <sr@denx.de>
44369
44370 commit 342cd097be1e7affe82f42ab3da220959a699e64
44371 Author: Michal Simek <monstr@monstr.eu>
44372 Date:   Fri Mar 30 22:52:09 2007 +0200
44373
44374     [PATCH] Clean include dependence
44375
44376 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
44377 Author: Michal Simek <monstr@monstr.eu>
44378 Date:   Fri Mar 30 22:42:45 2007 +0200
44379
44380     [CLEAN] Remove inefficient Suzaku code
44381
44382 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
44383 Author: Stefan Roese <sr@denx.de>
44384 Date:   Wed Mar 28 15:03:16 2007 +0200
44385
44386     Merge some AMCC make targets to keep the top-level Makefile smaller
44387
44388     Signed-off-by: Stefan Roese <sr@denx.de>
44389
44390 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
44391 Author: Stefan Roese <sr@denx.de>
44392 Date:   Wed Mar 28 14:52:12 2007 +0200
44393
44394     i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
44395
44396     The "old" i2c commands (iprobe, imd...) are now compiled in again,
44397     even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
44398     config option.
44399
44400     Signed-off-by: Stefan Roese <sr@denx.de>
44401
44402 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
44403 Author: Michal Simek <monstr@monstr.eu>
44404 Date:   Tue Mar 27 00:32:16 2007 +0200
44405
44406     PATCH: Resolve GPL license problem
44407
44408 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
44409 Author: Rodolfo Giometti <giometti@enneenne.com>
44410 Date:   Mon Mar 26 12:03:36 2007 +0200
44411
44412     PXA: pxa27x USB OHCI support
44413
44414     Signed-off-by: Rodolfo Giometti <giometti@linux.it>
44415
44416 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
44417 Author: Markus Klotzbuecher <mk@denx.de>
44418 Date:   Mon Mar 26 11:21:05 2007 +0200
44419
44420     USB: remove the S3C24X0_merge #define, which was introduced while
44421     merging OHCI drivers.
44422
44423     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
44424
44425 commit 1798049522f594013aea29457d46794298c6ae15
44426 Author: Michal Simek <root@monstr.eu>
44427 Date:   Mon Mar 26 01:39:07 2007 +0200
44428
44429     Support for XUPV2P board
44430     Reset support
44431     BSP autoconfig support
44432
44433 commit 0d974d5297349504a2ddfa09314be573b5df320a
44434 Author: Stefan Roese <sr@denx.de>
44435 Date:   Sat Mar 24 15:57:09 2007 +0100
44436
44437     [PATCH] Add 4xx GPIO functions
44438
44439     This patch adds some 4xx GPIO functions. It also moves some of the
44440     common code and defines into a common 4xx GPIO header file.
44441
44442     Signed-off-by: Stefan Roese <sr@denx.de>
44443
44444 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
44445 Author: Stefan Roese <sr@denx.de>
44446 Date:   Sat Mar 24 15:55:58 2007 +0100
44447
44448     [PATCH] Small Sequoia cleanup
44449
44450     Signed-off-by: Stefan Roese <sr@denx.de>
44451
44452 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
44453 Author: Stefan Roese <sr@denx.de>
44454 Date:   Sat Mar 24 15:45:34 2007 +0100
44455
44456     [PATCH] Clean up 40EZ/Acadia support
44457
44458     This patch cleans up all the open issue of the preliminary
44459     Acadia support.
44460
44461     Signed-off-by: Stefan Roese <sr@denx.de>
44462
44463 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
44464 Author: Jon Loeliger <jdl@freescale.com>
44465 Date:   Tue Dec 12 11:02:20 2006 -0600
44466
44467     Fix 8641HPCN problem with ld version 2.16
44468
44469     (Dot outside sections problem).
44470
44471     This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
44472
44473     Signed-off-by: Jon Loeliger <jdl@freescale.com>
44474
44475 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
44476 Author: Haiying Wang <haiying.wang@freescale.com>
44477 Date:   Thu Dec 7 10:35:55 2006 -0600
44478
44479     Set Rev 2.x 86xx PIC in mixed mode.
44480
44481     Prevent false interrupt from hanging Linux as MSR[EE] is set
44482     to enable interrupts by changing the PIC out of the default
44483     pass through mode into mixed mode.
44484
44485     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
44486     Signed-off-by: Jon Loeliger <jdl@freescale.com>
44487
44488 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
44489 Author: Jason Jin <jason.jin@freescale.com>
44490 Date:   Thu Dec 7 10:32:35 2006 -0600
44491
44492     Add flash cmd function to 8641HPCN ramboot
44493
44494     Also fixes some commmand for 8641 HPCN ramboot case.
44495
44496     Signed-off-by: Jason Jin <jason.jin@freescale.com>
44497     Signed-off-by: Jon Loeliger <jdl@freescale.com>
44498
44499 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
44500 Author: Ed Swarthout <ed.swarthout@freescale.com>
44501 Date:   Thu Dec 7 10:34:14 2006 -0600
44502
44503     Add support for 8641 Rev 2 silicon.
44504
44505     Without this patch, I am unable to get to the prompt on rev 2 silicon.
44506     Only set ddrioovcr for rev1.
44507
44508     Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
44509     Signed-off-by: Jon Loeliger <jdl@freescale.com>
44510
44511 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
44512 Author: Wolfgang Denk <wd@denx.de>
44513 Date:   Thu Mar 22 00:13:12 2007 +0100
44514
44515     Code cleanup / re-insert previous Copyright entries.
44516
44517     Signed-off-by: Wolfgang Denk <wd@denx.de>
44518
44519 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
44520 Author: Wolfgang Denk <wd@denx.de>
44521 Date:   Wed Mar 21 23:26:15 2007 +0100
44522
44523     Code cleanup. Update CHANGELOG
44524
44525 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
44526 Author: Stefan Roese <sr@denx.de>
44527 Date:   Wed Mar 21 14:54:29 2007 +0100
44528
44529     ppc4xx: Fix file mode of include/configs/acadia.h
44530
44531     Signed-off-by: Stefan Roese <sr@denx.de>
44532
44533 commit d5f4614c9350d9333e575100fb250aab774d0258
44534 Author: Markus Klotzbuecher <mk@denx.de>
44535 Date:   Wed Mar 21 14:41:46 2007 +0100
44536
44537     SPC1920: fix small clock routing bug
44538
44539     Signed-off-by: Markus Klotzbuecher <mk@denx.de>
44540
44541 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
44542 Author: Stefan Roese <sr@denx.de>
44543 Date:   Wed Mar 21 13:39:57 2007 +0100
44544
44545     [PATCH] Add AMCC Acadia (405EZ) eval board support
44546
44547     This patch adds support for the new AMCC Acadia eval board.
44548
44549     Please note that this Acadia/405EZ support is still in a beta stage.
44550     Still lot's of cleanup needed but we need a preliminary release now.
44551
44552     Signed-off-by: Stefan Roese <sr@denx.de>
44553
44554 commit e01bd218b00af73499331a1a701625a852cd286f
44555 Author: Stefan Roese <sr@denx.de>
44556 Date:   Wed Mar 21 13:38:59 2007 +0100
44557
44558     [PATCH] Add AMCC PPC405EZ support
44559
44560     This patch adds support for the new AMCC 405EZ PPC. It is in
44561     preparation for the AMCC Acadia board support.
44562
44563     Please note that this Acadia/405EZ support is still in a beta stage.
44564     Still lot's of cleanup needed but we need a preliminary release now.
44565
44566     Signed-off-by: Stefan Roese <sr@denx.de>
44567
44568 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
44569 Author: Heiko Schocher <hs@pollux.denx.de>
44570 Date:   Wed Mar 21 08:45:17 2007 +0100
44571
44572     [PATCH] TQM8272: dont change the bits given from the HRCW
44573                      for the SIUMCR and BCR Register.
44574                      Fix the calculation for the EEprom Size
44575
44576     Signed-off-by: Heiko Schocher <hs@denx.de>
44577
44578 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
44579 Author: Aubrey Li <aubrey.adi@gmail.com>
44580 Date:   Tue Mar 20 18:16:24 2007 +0800
44581
44582     [Blackfin][PATCH] Add BF561 EZKIT board support
44583
44584 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
44585 Author: Aubrey Li <aubrey.adi@gmail.com>
44586 Date:   Mon Mar 19 22:55:58 2007 +0800
44587
44588     [Blackfin][PATCH] minor cleanup
44589
44590 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
44591 Author: Wolfgang Denk <wd@denx.de>
44592 Date:   Mon Mar 19 13:10:08 2007 +0100
44593
44594     Remove obsoleted POST files.
44595
44596     Signed-off-by: Wolfgang Denk <wd@denx.de>
44597
44598 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
44599 Author: Aubrey Li <aubrey.adi@gmail.com>
44600 Date:   Mon Mar 19 01:26:11 2007 +0800
44601
44602     [PATCH] Add flash chip M29W320ET/B support
44603
44604 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
44605 Author: Aubrey Li <aubrey.adi@gmail.com>
44606 Date:   Mon Mar 19 01:24:52 2007 +0800
44607
44608     [Blackfin][PATCH] Add BF537 stamp board support
44609
44610 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
44611 Author: Stefan Roese <sr@denx.de>
44612 Date:   Fri Mar 16 21:11:42 2007 +0100
44613
44614     [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
44615
44616     Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
44617     DDR memory are dynamically programmed matching the total size
44618     of the equipped memory (DIMM modules).
44619
44620     Signed-off-by: Stefan Roese <sr@denx.de>
44621
44622 commit 76d1466f918b881cda2d259254761e73885093c2
44623 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44624 Date:   Tue Mar 13 13:38:05 2007 +0100
44625
44626     [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
44627             boards in terms of unification.
44628
44629     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44630
44631 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
44632 Author: Wolfgang Denk <wd@denx.de>
44633 Date:   Tue Mar 13 16:05:55 2007 +0100
44634
44635     Make SC3 board build with 'make O='; use 'addcons' consistently
44636     (SC3 and Jupiter used to use 'addcon' instead).
44637
44638     Signed-off-by: Wolfgang Denk wd@denx.de
44639
44640 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
44641 Author: Heiko Schocher <hs@pollux.denx.de>
44642 Date:   Tue Mar 13 09:40:59 2007 +0100
44643
44644     [PATCH] update board config for jupiter Board:
44645             added Hush Shell,
44646                   CONFIG_CMDLINE_EDITING,
44647                   CFG_ENV_ADDR_REDUND activated
44648
44649     Signed-off-by: Heiko Schocher <hs@denx.de>
44650
44651 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
44652 Author: Aubrey Li <aubrey.adi@gmail.com>
44653 Date:   Mon Mar 12 12:11:55 2007 +0800
44654
44655     [Blackfin][PATCH] minor cleanup
44656
44657 commit bfa5754a58477ac917d21527cd0f079d87cf188e
44658 Author: Aubrey Li <aubrey.adi@gmail.com>
44659 Date:   Mon Mar 12 01:42:06 2007 +0800
44660
44661     [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
44662
44663 commit 8440bb14581a294375c34b91b42512f9753d1130
44664 Author: Aubrey Li <aubrey.adi@gmail.com>
44665 Date:   Mon Mar 12 00:25:14 2007 +0800
44666
44667     [Blackfin][PATCH] code cleanup
44668
44669 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
44670 Author: Michal Simek <monstr@monstr.eu>
44671 Date:   Sun Mar 11 13:48:24 2007 +0100
44672
44673     [Microblaze][PATCH] part 2
44674     timer support
44675     interrupt controller support
44676     flash support
44677     ethernet support
44678     cache support
44679     board information support
44680     env support
44681     booting image support
44682
44683     adding support for Xilinx ML401
44684
44685 commit 76316a318de91f6184e7c22a10e02d275ade2441
44686 Author: Michal Simek <monstr@monstr.eu>
44687 Date:   Sun Mar 11 13:42:58 2007 +0100
44688
44689     [Microblaze][PATCH]
44690     timer support
44691     interrupt controller support
44692     flash support
44693     ethernet support
44694     cache support
44695     board information support
44696     env support
44697     booting image support
44698
44699     adding support for Xilinx ML401
44700
44701 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
44702 Author: Aubrey Li <aubrey.adi@gmail.com>
44703 Date:   Sat Mar 10 23:49:29 2007 +0800
44704
44705     [Blackfin][PATCH] code cleanup
44706
44707 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
44708 Author: Aubrey.Li <aubrey.adi@gmail.com>
44709 Date:   Fri Mar 9 13:40:56 2007 +0800
44710
44711     [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
44712
44713 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
44714 Author: Aubrey.Li <aubrey.adi@gmail.com>
44715 Date:   Fri Mar 9 13:38:44 2007 +0800
44716
44717     [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
44718
44719 commit 992423ab43c2bcf6b704853bd00af77450915e20
44720 Author: Stefan Roese <sr@denx.de>
44721 Date:   Thu Mar 8 23:00:08 2007 +0100
44722
44723     ppc4xx: Fix file mode of sequoia.c
44724
44725     Signed-off-by: Stefan Roese <sr@denx.de>
44726
44727 commit eb92f613556800f7483666db09d9a237ad911d4a
44728 Author: Wolfgang Denk <wd@pollux.denx.de>
44729 Date:   Thu Mar 8 22:52:51 2007 +0100
44730
44731     Minor cleanup.
44732
44733 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
44734 Author: John Otken john@softadvances.com <john@softadvances.com>
44735 Date:   Thu Mar 8 09:39:48 2007 -0600
44736
44737     ppc4xx: Clear Sequoia/Rainier security engine reset bits
44738
44739     Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
44740
44741 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
44742 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44743 Date:   Thu Mar 8 16:26:52 2007 +0100
44744
44745     [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
44746
44747     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44748
44749 commit d9fc703246840c4b268debf48c334ba55c597dc0
44750 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44751 Date:   Thu Mar 8 16:25:47 2007 +0100
44752
44753     [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
44754
44755     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44756
44757 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
44758 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44759 Date:   Thu Mar 8 16:23:11 2007 +0100
44760
44761     [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
44762
44763     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44764
44765 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
44766 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44767 Date:   Thu Mar 8 16:20:32 2007 +0100
44768
44769     [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
44770
44771     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44772
44773 commit f9fc6a5852a6335840882fa2111925010eea1abe
44774 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44775 Date:   Wed Mar 7 15:32:01 2007 +0100
44776
44777     fixed ethernet phy configuration for plu405 board
44778
44779     Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44780
44781 commit 769104c9356594deb2092e204a39c05b33202d6c
44782 Author: Wolfgang Denk <wd@pollux.denx.de>
44783 Date:   Thu Mar 8 21:49:27 2007 +0100
44784
44785     Minor cleanup
44786
44787 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
44788 Author: Stefan Roese <sr@denx.de>
44789 Date:   Thu Mar 8 10:13:16 2007 +0100
44790
44791     [PATCH] Update AMCC Luan 440SP eval board support
44792
44793     The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
44794     inititializition. This includes DDR auto calibration and support
44795     for different DIMM modules, instead of the fixed setup used in
44796     the earlier version.
44797
44798     This patch also enables the cache in FLASH for the startup
44799     phase of U-Boot (while running from FLASH). After relocating to
44800     SDRAM the cache is disabled again. This will speed up the boot
44801     process, especially the SDRAM setup, since there are some loops
44802     for memory testing (auto calibration).
44803
44804     Signed-off-by: Stefan Roese <sr@denx.de>
44805
44806 commit 2f5df47351910a2936c7741cf111855829200943
44807 Author: Stefan Roese <sr@denx.de>
44808 Date:   Thu Mar 8 10:10:18 2007 +0100
44809
44810     [PATCH] Update AMCC Yucca 440SPe eval board support
44811
44812     The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
44813     inititializition. This includes DDR auto calibration and support
44814     for different DIMM modules, instead of the fixed setup used in
44815     the earlier version.
44816
44817     Signed-off-by: Stefan Roese <sr@denx.de>
44818
44819 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
44820 Author: Stefan Roese <sr@denx.de>
44821 Date:   Thu Mar 8 10:07:18 2007 +0100
44822
44823     ppc4xx: Small AMCC Katmai 440SPe update
44824
44825     Signed-off-by: Stefan Roese <sr@denx.de>
44826
44827 commit df294497479b1dca6dd86318b2a912f72fede0df
44828 Author: Stefan Roese <sr@denx.de>
44829 Date:   Thu Mar 8 10:06:09 2007 +0100
44830
44831     ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
44832
44833     Signed-off-by: Stefan Roese <sr@denx.de>
44834
44835 commit 83853178bd36bca6f0f8f1331476620c84a587fc
44836 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
44837 Date:   Wed Mar 7 12:14:50 2007 -0600
44838
44839     net - Support ping reply when processing net-loop
44840
44841     Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
44842
44843     This permits the ping command to test the phy interface when the phy
44844     is put in loopback mode (typically by setting register 0 bit 14).
44845
44846     It also allows the port to respond to an external ping when u-boot is
44847     processing some other net command (such as tftp).  This is useful when
44848     tftp appears to hang.
44849
44850     Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
44851     Signed-off-by: Ben Warren <bwarren@qstreams.com>
44852
44853 commit fa1aef15bcd47736687be1af544506e90fba545d
44854 Author: Stefan Roese <sr@denx.de>
44855 Date:   Wed Mar 7 16:43:00 2007 +0100
44856
44857     [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
44858
44859     Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
44860     DDR memory are dynamically programmed matching the total size
44861     of the equipped memory (DIMM modules).
44862
44863     Signed-off-by: Stefan Roese <sr@denx.de>
44864
44865 commit e2ebe696818939e2b974628be9c921ea3fe9de13
44866 Author: Stefan Roese <sr@denx.de>
44867 Date:   Wed Mar 7 16:39:36 2007 +0100
44868
44869     [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
44870
44871     This patch fixes a problem that occurs when 2 DIMM's are
44872     used. This problem was first spotted and fixed by Gerald Jackson
44873     <gerald.jackson@reaonixsecurity.com> but this patch fixes the
44874     problem in a little more clever way.
44875
44876     This patch also adds the nice functionality to dynamically
44877     create the TLB entries for the SDRAM (tlb.c). So we should
44878     never run into such problems with wrong (too short) TLB
44879     initialization again on these platforms.
44880
44881     As this feature is new to the "old" 44x SPD DDR driver, it
44882     has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
44883
44884     Signed-off-by: Stefan Roese <sr@denx.de>
44885
44886 commit 39218433983417b9df087976a79e3f80dd5e83d6
44887 Author: Wolfgang Denk <wd@denx.de>
44888 Date:   Wed Mar 7 16:33:44 2007 +0100
44889
44890     UC101: fix compiler warnings
44891
44892 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
44893 Author: Wolfgang Denk <wd@pollux.denx.de>
44894 Date:   Wed Mar 7 16:19:46 2007 +0100
44895
44896     HMI1001: fix build error, cleanup compiler warnings.
44897
44898 commit ad5bb451ade552c44bef9119d907929ebc2c126f
44899 Author: Wolfgang Denk <wd@pollux.denx.de>
44900 Date:   Tue Mar 6 18:08:43 2007 +0100
44901
44902     Restructure POST directory to support of other CPUs, boards, etc.
44903
44904 commit a5284efd125967675b2e9c6ef7b95832268ad360
44905 Author: Wolfgang Denk <wd@pollux.denx.de>
44906 Date:   Tue Mar 6 18:01:47 2007 +0100
44907
44908     Fix HOSTARCH handling.
44909     Patch by Mike Frysinger, Mar 05 2007
44910
44911 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
44912 Author: Stefan Roese <sr@denx.de>
44913 Date:   Tue Mar 6 07:47:04 2007 +0100
44914
44915     [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
44916
44917     As provided by the AMCC applications team, this patch optimizes the
44918     DDR2 setup for 166MHz bus speed. The values provided are also save
44919     to use on a "normal" 133MHz PLB bus system. Only the refresh counter
44920     setup has to be adjusted as done in this patch.
44921
44922     For this the NAND booting version had to include the "speed.c" file
44923     from the cpu/ppc4xx directory. With this addition the NAND SPL image
44924     will just fit into the 4kbytes of program space. gcc version 4.x as
44925     provided with ELDK 4.x is needed to generate this optimized code.
44926
44927     Signed-off-by: Stefan Roese <sr@denx.de>
44928
44929 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
44930 Author: Wolfgang Denk <wd@pollux.denx.de>
44931 Date:   Sun Mar 4 01:36:05 2007 +0100
44932
44933     Some code cleanup.
44934
44935 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
44936 Author: Kim Phillips <kim.phillips@freescale.com>
44937 Date:   Wed Feb 28 00:02:04 2007 -0600
44938
44939     mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
44940
44941     (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
44942
44943 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
44944 Author: Kumar Gala <galak@kernel.crashing.org>
44945 Date:   Tue Feb 27 23:51:42 2007 -0600
44946
44947     mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
44948
44949     The config value for:
44950     * CFG_ACR_PIPE_DEP
44951     * CFG_ACR_RPTCNT
44952     * CFG_SPCR_TSEC1EP
44953     * CFG_SPCR_TSEC2EP
44954     * CFG_SCCR_TSEC1CM
44955     * CFG_SCCR_TSEC2CM
44956
44957     Were not being used when setting the appropriate register
44958
44959     Added:
44960     * CFG_SCCR_USBMPHCM
44961     * CFG_SCCR_USBDRCM
44962     * CFG_SCCR_PCICM
44963     * CFG_SCCR_ENCCM
44964
44965     To allow full config of the SCCR.
44966
44967     Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
44968     that were just bogus.
44969
44970     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44971
44972 commit d51b3cf371cd441030460ef19d36b2924c361b1a
44973 Author: Kim Phillips <kim.phillips@freescale.com>
44974 Date:   Thu Feb 22 20:06:57 2007 -0600
44975
44976     mpc83xx: update [local-]mac-address properties on UEC based devices
44977
44978     8360 and 832x weren't updating their [local-]mac-address
44979     properties. This patch fixes that.
44980
44981     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44982
44983 commit 61f4f912acbe60776c5e00df1ec94094ce672957
44984 Author: Timur Tabi <timur@freescale.com>
44985 Date:   Tue Feb 13 10:41:42 2007 -0600
44986
44987     mpc83xx: write MAC address to mac-address and local-mac-address
44988
44989     Some device trees have a mac-address property, some have local-mac-address,
44990     and some have both.  To support all of these device trees, this patch
44991     updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
44992     This function already updates local-mac-address.
44993
44994     Signed-off-by: Timur Tabi <timur@freescale.com>
44995
44996 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
44997 Author: Kim Phillips <kim.phillips@freescale.com>
44998 Date:   Tue Feb 27 18:41:08 2007 -0600
44999
45000     mpc83xx: add command line editing by default
45001
45002 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
45003 Author: Kim Phillips <kim.phillips@freescale.com>
45004 Date:   Wed Feb 14 19:50:53 2007 -0600
45005
45006     mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
45007
45008     Disable G1TXCLK, G2TXCLK h/w buffers. This patch
45009     fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
45010
45011     Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
45012
45013     Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
45014     Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
45015
45016 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
45017 Author: Xie Xiaobo <r63061@freescale.com>
45018 Date:   Wed Feb 14 18:27:17 2007 +0800
45019
45020     mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
45021
45022     The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
45023     it pass DDR/DDR2 compliance tests.
45024
45025     Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
45026
45027 commit b110f40bd180c6b560276589beedf753e97c46ce
45028 Author: Xie Xiaobo <r63061@freescale.com>
45029 Date:   Wed Feb 14 18:27:06 2007 +0800
45030
45031     mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
45032
45033     MPC8360E rev2.0 have new spridr,and PVR value,
45034     The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
45035
45036     Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
45037
45038 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
45039 Author: Xie Xiaobo <r63061@freescale.com>
45040 Date:   Wed Feb 14 18:26:44 2007 +0800
45041
45042     mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
45043
45044     MPC8349E rev3.1 have new spridr,and PVR value,
45045     The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
45046
45047     Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
45048
45049 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
45050 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
45051 Date:   Wed Jan 31 11:04:19 2007 +0100
45052
45053     mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
45054
45055     Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
45056     which is used to se if an slave will ACK after receiving its address.
45057
45058     Correct i2c probing to use this method as the old method could upset
45059     a slave as it wrote a data byte to it.
45060
45061     Add a small delay in i2c_init() to let the controller
45062     shutdown any ongoing I2C activity.
45063
45064     Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
45065
45066 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
45067 Author: Timur Tabi <timur@freescale.com>
45068 Date:   Wed Jan 31 15:54:29 2007 -0600
45069
45070     mpc83xx: Add support for the MPC8349E-mITX-GP
45071
45072     Add support for the MPC8349E-mITX-GP, a stripped-down version of the
45073     MPC8349E-mITX.  Bonus features include support for low-boot (BMS bit in
45074     HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
45075
45076     Signed-off-by: Timur Tabi <timur@freescale.com>
45077
45078 commit fab16807adad350f618024350c6950165c247c72
45079 Author: Timur Tabi <timur@freescale.com>
45080 Date:   Wed Jan 31 15:54:20 2007 -0600
45081
45082     mpc83xx: Delete sdram_init() for MPC8349E-mITX
45083
45084     There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
45085     never does anything.  This patch deletes it.
45086
45087     Signed-off-by: Timur Tabi <timur@freescale.com>
45088
45089 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
45090 Author: Dave Liu <daveliu@freescale.com>
45091 Date:   Fri Jan 19 10:43:26 2007 +0800
45092
45093     mpc83xx: Fix the LAW1/3 bug
45094
45095     The patch solves the alignment problem of the local bus access windows to
45096     render accessible the memory bank and PHY registers of UPC 1 (starting at
45097     0xf801 0000). What we actually did was to adjust the sizes of the bus
45098     access windows so that the base address alignment requirement would be met.
45099
45100     Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
45101     Signed-off-by: Gridish Shlomi <gridish@freescale.com>
45102     Signed-off-by: Dave Liu <daveliu@freescale.com>
45103
45104 commit 97c4b397dce236a7318b304667bf89e59d08b17c
45105 Author: Kim Phillips <kim.phillips@freescale.com>
45106 Date:   Tue Jan 30 16:15:31 2007 -0600
45107
45108     mpc83xx: don't hang if watchdog configured on 8360, 832x
45109
45110     don't hang if watchdog configured on 8360, 832x
45111
45112     The watchdog programming model is the same across all 83xx devices;
45113     make the code reflect that.
45114
45115 commit b70047478570e371ce7223be342ce98afea0f7d6
45116 Author: Kim Phillips <kim.phillips@freescale.com>
45117 Date:   Tue Jan 30 16:15:21 2007 -0600
45118
45119     mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
45120
45121     protect memcpy to bad address if a local-mac-address is missing from dt
45122
45123 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
45124 Author: Kim Phillips <kim.phillips@freescale.com>
45125 Date:   Tue Jan 30 16:15:04 2007 -0600
45126
45127     mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
45128
45129     make 8360 default environment fdt be 8360 (not 8349)
45130
45131 commit a28899c910024a0226331df07207b1038c300c93
45132 Author: Emilian Medve <Emilian.Medve@freescale.com>
45133 Date:   Tue Jan 30 16:14:50 2007 -0600
45134
45135     mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
45136
45137     The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
45138     be used for busy-waiting since it strips the 'volatile' property from
45139     the bd variable. gcc3 was working by pure luck.
45140
45141     This is a follow on patch to "Fix the UEC driver bug of QE"
45142
45143 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
45144 Author: Kumar Gala <galak@kernel.crashing.org>
45145 Date:   Tue Jan 30 14:08:30 2007 -0600
45146
45147     mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
45148
45149     The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
45150     MPC834X class processors.  Change the protections from CONFIG_MPC8349 to
45151     CONFIG_MPC834X so they are more generic.
45152
45153     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
45154
45155 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
45156 Author: Kim Phillips <kim.phillips@freescale.com>
45157 Date:   Thu Jan 25 13:40:55 2007 -0600
45158
45159     mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
45160
45161 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
45162 Author: Kim Phillips <kim.phillips@freescale.com>
45163 Date:   Wed Jan 24 17:18:37 2007 -0600
45164
45165     mpc83xx: sort Makefile targets
45166
45167     reordered targets alphabetically
45168
45169 commit 91e25769771c1164ed63ffca0add49f934ae3343
45170 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
45171 Date:   Tue Jan 16 11:38:14 2007 -0500
45172
45173     mpc83xx: U-Boot support for Wind River SBC8349
45174
45175     I've redone the SBC8349 support to match git-current, which
45176     incorporates all the MPC834x updates from Freescale since the 1.1.6
45177     release,  including the DDR changes.
45178
45179     I've kept all the SBC8349 files as parallel as possible to the
45180     MPC8349EMDS ones for ease of maintenance and to allow for easy
45181     inspection of what was changed to support this board.  Hence the SBC8349
45182     U-Boot has FDT support and everything else that the MPC8349EMDS has.
45183
45184     Fortunately the Freescale updates added support for boards using CS0,
45185     but I had to change spd_sdram.c to allow for board specific settings for
45186     the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
45187     default if the board doesn't specify a value.)
45188
45189     Hopefully this should be mergeable as-is and require no whitespace
45190     cleanups or similar, but if something doesn't measure up then let me
45191     know and I'll fix it.
45192
45193     Thanks,
45194     Paul.
45195
45196 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
45197 Author: Sam Song <samsongshu@yahoo.com.cn>
45198 Date:   Thu Dec 14 19:03:21 2006 +0800
45199
45200     mpc83xx: Remove a redundant semicolon in mpc8349itx.c
45201
45202     A redundant semicolon existed in mpc8349itx.c
45203     should be removed.
45204
45205     Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
45206
45207 commit f35f358241c549be3f75cfe2eaa642914275b7ba
45208 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
45209 Date:   Wed Dec 6 21:23:55 2006 -0500
45210
45211     mpc83xx: Put the version (and magic) after the HRCW.
45212
45213     Put the version (and magic) after the HRCW.  This puts it in a fixed
45214     location in flash, not at the start of flash but as close as we can get.
45215
45216     Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
45217
45218 commit 48aecd969171a6e99a55fae04933857787f9a5bd
45219 Author: Dave Liu <r63238@freescale.com>
45220 Date:   Thu Dec 7 21:14:51 2006 +0800
45221
45222     mpc83xx: Add the MPC832XEMDS board readme
45223
45224     Add the MPC832XEMDS board readme
45225
45226     Signed-off-by: Dave Liu <daveliu@freescale.com>
45227
45228 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
45229 Author: Dave Liu <r63238@freescale.com>
45230 Date:   Thu Dec 7 21:13:15 2006 +0800
45231
45232     mpc83xx: Add support for the MPC832XEMDS board
45233
45234     This patch supports DUART, ETH3/4 and PCI etc.
45235
45236     Signed-off-by: Dave Liu <daveliu@freescale.com>
45237
45238 commit e080313c32322e15ab5a18eb896a252858c57284
45239 Author: Dave Liu <r63238@freescale.com>
45240 Date:   Thu Dec 7 21:11:58 2006 +0800
45241
45242     mpc83xx: streamline the 83xx immr head file
45243
45244     For better format and style, I streamlined the 83xx head files,
45245     including immap_83xx.h and mpc83xx.h. In the old head files, 1)
45246     duplicated macro definition appear in the both files; 2) the structure
45247     of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
45248     macro definition put inside the each structure. So, I cleaned up the
45249     structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
45250     moved the macro definition to mpc83xx.h, Just like MPC8260.
45251
45252     CHANGELOG
45253
45254     *streamline the 83xx immr head file
45255
45256     Signed-off-by: Dave Liu <daveliu@freescale.com>
45257
45258 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
45259 Author: Dave Liu <r63238@freescale.com>
45260 Date:   Wed Dec 6 11:38:17 2006 +0800
45261
45262     mpc83xx: Fix the UEC driver bug of QE
45263
45264     The patch prevents the GCC tool chain from striping useful code for
45265     optimization. It will make UEC ethernet driver workable, Otherwise the
45266     UEC will fail in tx when you are using gcc4.x. but the driver can work
45267     when using gcc3.4.3.
45268
45269     CHANGELOG
45270
45271     *Prevent the GCC from striping code for optimization, Otherwise the UEC
45272     will tx failed when you are using gcc4.x.
45273
45274     Signed-off-by: Dave Liu <daveliu@freescale.com>
45275
45276 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
45277 Author: Stefan Roese <sr@denx.de>
45278 Date:   Thu Mar 1 21:11:36 2007 +0100
45279
45280     [PATCH] Update AMCC Katmai 440SPe eval board support
45281
45282     This patch updates the recently added Katmai board support. The biggest
45283     change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
45284     driver.
45285
45286     Please note, that still some problems are left with some memory
45287     configurations. See the driver for more details.
45288
45289     Signed-off-by: Stefan Roese <sr@denx.de>
45290
45291 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
45292 Author: Stefan Roese <sr@denx.de>
45293 Date:   Thu Mar 1 07:03:25 2007 +0100
45294
45295     [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
45296
45297     Signed-off-by: Stefan Roese <sr@denx.de>
45298
45299 commit ccbc7036648e465697ca298ba51e0e76dda352a0
45300 Author: Wolfgang Denk <wd@pollux.denx.de>
45301 Date:   Wed Feb 28 01:28:53 2007 +0100
45302
45303     SC3: fix typo in default environment
45304
45305 commit e344568b1b46af85ec32d815586f91bc115d6223
45306 Author: Sergei Poselenov <sposelenov@emcraft.com>
45307 Date:   Tue Feb 27 20:15:30 2007 +0300
45308
45309     MCC200: Fixes for update procedure
45310
45311     - fix logic error in image type handling
45312     - make sure file system images (cramfs etc.) get stored in flash
45313       with image header stripped so they can be mounted through MTD
45314
45315 commit 743571145b37182757d4e688a77860b36ee77573
45316 Author: Wolfgang Denk <wd@pollux.denx.de>
45317 Date:   Tue Feb 27 14:26:04 2007 +0100
45318
45319     Minor code cleanup.
45320
45321 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
45322 Author: Sergei Poselenov <sposelenov@emcraft.com>
45323 Date:   Tue Feb 27 12:40:16 2007 +0300
45324
45325     MCC200 update - add LCD Progress Indicator
45326
45327 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
45328 Author: Stefan Roese <sr@denx.de>
45329 Date:   Thu Feb 22 07:43:34 2007 +0100
45330
45331     [PATCH] get_dev() now unconditionally uses manual relocation
45332
45333     Since the relocation fix is not included yet and we're not sure how
45334     it will be added, this patch removes code that required relocation
45335     to be fixed for now.
45336
45337     Signed-off-by: Stefan Roese <sr@denx.de>
45338
45339 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
45340 Author: Stefan Roese <sr@denx.de>
45341 Date:   Thu Feb 22 07:40:23 2007 +0100
45342
45343     [PATCH] Change systemace driver to select 8 & 16bit mode
45344
45345     As suggested by Grant Likely this patch enables the Xilinx SystemACE
45346     driver to select 8 or 16bit mode upon startup.
45347
45348     Signed-off-by: Stefan Roese <sr@denx.de>
45349
45350 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
45351 Author: Haiying Wang <Haiying.Wang@freescale.com>
45352 Date:   Wed Feb 21 16:52:31 2007 +0100
45353
45354     [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
45355
45356     Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
45357     is fully finished. The sync() is defined in each CPU's io.h file. For
45358     those CPUs which do not need sync for now, a dummy sync() is defined in
45359     their io.h as well.
45360
45361     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
45362
45363 commit da04995c7dc6772013a9a0dc5c767f190c402478
45364 Author: Stefan Roese <sr@denx.de>
45365 Date:   Wed Feb 21 13:44:34 2007 +0100
45366
45367     [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
45368
45369     Signed-off-by: Stefan Roese <sr@denx.de>
45370
45371 commit 751bb57107d78978ae08e697c3deba816f5be091
45372 Author: Stefan Roese <sr@denx.de>
45373 Date:   Tue Feb 20 13:21:57 2007 +0100
45374
45375     [PATCH] Fix relocation problem with "new" get_dev() function
45376
45377     This patch enables the "new" get_dev() function for block devices
45378     introduced by Grant Likely to be used on systems that still suffer
45379     from the relocation problems (manual relocation neede because of
45380     problems with linker script).
45381
45382     Hopefully we can resolve this relocation issue soon for all platform
45383     so we don't need this additional code anymore.
45384
45385     Signed-off-by: Stefan Roese <sr@denx.de>
45386
45387 commit d93e2212f962668b3dce091ff5edc33f2347fe37
45388 Author: Stefan Roese <sr@denx.de>
45389 Date:   Tue Feb 20 13:17:42 2007 +0100
45390
45391     [PATCH] Update SystemACE driver for 16bit access
45392
45393     This patch removes some problems when the Xilinx SystemACE driver
45394     is used with 16bit access on an big endian platform (like the
45395     AMCC Katmai).
45396
45397     Signed-off-by: Stefan Roese <sr@denx.de>
45398
45399 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
45400 Author: Stefan Roese <sr@denx.de>
45401 Date:   Tue Feb 20 13:15:40 2007 +0100
45402
45403     [PATCH] Clean up Katmai (440SPe) linker script
45404
45405     Signed-off-by: Stefan Roese <sr@denx.de>
45406
45407 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
45408 Author: Stefan Roese <sr@denx.de>
45409 Date:   Tue Feb 20 10:57:08 2007 +0100
45410
45411     [PATCH] Add support for the AMCC Katmai (440SPe) eval board
45412
45413     Signed-off-by: Stefan Roese <sr@denx.de>
45414
45415 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
45416 Author: Stefan Roese <sr@denx.de>
45417 Date:   Tue Feb 20 10:51:26 2007 +0100
45418
45419     [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
45420
45421     This patch switches to the desired I2C bus when the date/dtt
45422     commands are called. This can be configured using the
45423     CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
45424
45425     Signed-off-by: Stefan Roese <sr@denx.de>
45426
45427 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
45428 Author: Stefan Roese <sr@denx.de>
45429 Date:   Tue Feb 20 10:43:34 2007 +0100
45430
45431     [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
45432
45433     This patch adds support for the DDR2 controller used on the
45434     440SP and 440SPe. It is tested on the Katmai (440SPe) eval
45435     board and works fine with the following DIMM modules:
45436
45437     - Corsair CM2X512-5400C4 (512MByte per DIMM)
45438     - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
45439     - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
45440
45441     This patch also adds the nice functionality to dynamically
45442     create the TLB entries for the SDRAM (tlb.c). So we should
45443     never run into such problems with wrong (too short) TLB
45444     initialization again on these platforms.
45445
45446     Signed-off-by: Stefan Roese <sr@denx.de>
45447
45448 commit 36d830c9830379045f5daa9f542ac1c990c70068
45449 Author: Stefan Roese <sr@denx.de>
45450 Date:   Tue Feb 20 10:35:42 2007 +0100
45451
45452     [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
45453
45454     Since the existing 4xx SPD SDRAM initialization routines for the
45455     405 SDRAM controller and the 440 DDR controller don't have much in
45456     common this patch splits both drivers into different files.
45457
45458     This is in preparation for the 440 DDR2 controller support (440SP/e).
45459
45460     Signed-off-by: Stefan Roese <sr@denx.de>
45461
45462 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
45463 Author: Stefan Roese <sr@denx.de>
45464 Date:   Tue Feb 20 10:27:08 2007 +0100
45465
45466     [PATCH] PPC4xx: Add support for multiple I2C busses
45467
45468     This patch adds support for multiple I2C busses on the PPC4xx
45469     platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
45470     to make use of this feature.
45471
45472     It also merges the 405 and 440 i2c header files into one common
45473     file 4xx_i2c.h.
45474
45475     Also the 4xx i2c reset procedure is reworked since I experienced
45476     some problems with the first access on the 440SPe Katmai board.
45477
45478     Signed-off-by: Stefan Roese <sr@denx.de>
45479
45480 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
45481 Author: Grant Likely <grant.likely@secretlab.ca>
45482 Date:   Tue Feb 20 09:05:45 2007 +0100
45483
45484     [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
45485
45486     Block device read/write is anonymous data; there is no need to use a
45487     typed pointer.  void * is fine.  Also add a hook for block_read functions
45488
45489     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45490
45491 commit 53758fa20e935cc87eeb0519ed365df753a6f289
45492 Author: Grant Likely <grant.likely@secretlab.ca>
45493 Date:   Tue Feb 20 09:05:38 2007 +0100
45494
45495     [PATCH 8_9] Add block_write hook to block_dev_desc_t
45496
45497     Preparation for future patches which support block device writing
45498
45499     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45500
45501 commit f4852ebe6ca946a509667eb68be42026f837be76
45502 Author: Grant Likely <grant.likely@secretlab.ca>
45503 Date:   Tue Feb 20 09:05:31 2007 +0100
45504
45505     [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
45506
45507     Register read/write does not need to be wrapped in a full function.  The
45508     patch replaces them with macros.
45509
45510     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45511
45512 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
45513 Author: Grant Likely <grant.likely@secretlab.ca>
45514 Date:   Tue Feb 20 09:05:23 2007 +0100
45515
45516     [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
45517
45518     The code in this file is not a command; it is a device driver.  Put it in
45519     the correct place.  There are zero functional changes in this patch, it
45520     only moves the file.
45521
45522     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45523
45524 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
45525 Author: Grant Likely <grant.likely@secretlab.ca>
45526 Date:   Tue Feb 20 09:05:16 2007 +0100
45527
45528     [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
45529
45530     This patch is in preparation of additional changes to the sysace driver.
45531     May as well take this opportunity to fixup the inconsistent whitespace since
45532     this file is about to undergo major changes anyway.
45533
45534     There are zero functional changes in this patch.  It only cleans up the
45535     the whitespace.
45536
45537     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45538
45539 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
45540 Author: Grant Likely <grant.likely@secretlab.ca>
45541 Date:   Tue Feb 20 09:05:07 2007 +0100
45542
45543     [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
45544
45545     isprint is already defined in ctype.c
45546
45547     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45548
45549 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
45550 Author: Grant Likely <grant.likely@secretlab.ca>
45551 Date:   Tue Feb 20 09:05:00 2007 +0100
45552
45553     [PATCH 3_9] Move buffer print code from md command to common function
45554
45555     Printing a buffer is a darn useful thing.  Move the buffer print code
45556     into print_buffer() in lib_generic/
45557
45558     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45559
45560 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
45561 Author: Grant Likely <grant.likely@secretlab.ca>
45562 Date:   Tue Feb 20 09:04:52 2007 +0100
45563
45564     [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
45565
45566     Change the xilinx device drivers and board code to include config.h
45567     instead of xparameters.h directly.  config.h always includes the
45568     correct xparameters file.  This change reduces the posibility of
45569     including the wrong file when adding a new xilinx board port
45570
45571     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45572
45573 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
45574 Author: Grant Likely <grant.likely@secretlab.ca>
45575 Date:   Tue Feb 20 09:04:34 2007 +0100
45576
45577     [PATCH 1_4] Merge common get_dev() routines for block devices
45578
45579     Each of the filesystem drivers duplicate the get_dev routine.  This change
45580     merges them into a single function in part.c
45581
45582     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
45583
45584 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
45585 Author: Wolfgang Denk <wd@pollux.denx.de>
45586 Date:   Mon Feb 19 23:09:51 2007 +0100
45587
45588     MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
45589     as root file system images.
45590
45591 commit 489c696ae7211218961d159e43e722d74c36fcbc
45592 Author: Sergei Poselenov <sposelenov@emcraft.com>
45593 Date:   Wed Feb 14 14:30:28 2007 +0300
45594
45595     MCC200: Extensions to Software Update Mechanism
45596
45597     Update / extend Software Update Mechanism for MCC200 board:
45598
45599     - Add support for rootfs image added. The environment variables
45600       "rootfs_st" and "rootfs_nd" can be used to override the default
45601       values of the image start and end.
45602     - Remove excessive key check code.
45603     - Code cleanup.
45604
45605 commit 4be23a12f23f1372634edc3215137b09768b7949
45606 Author: Stefan Roese <sr@denx.de>
45607 Date:   Mon Feb 19 08:23:15 2007 +0100
45608
45609     [PATCH] Update Sequoia EBC configuration (NOR FLASH)
45610
45611     As spotted by Matthias Fuchs, the READY input should not be
45612     enabled for the NOR FLASH on the Sequoia board.
45613
45614     Signed-off-by: Stefan Roese <sr@denx.de>
45615
45616 commit 2605e90bf676d48123afe5719a846d2b52b24aac
45617 Author: Heiko Schocher <hs@pollux.denx.de>
45618 Date:   Fri Feb 16 07:57:42 2007 +0100
45619
45620     [PATCH] Added support for the jupiter board.
45621
45622     Signed-off-by: Heiko Schocher <hs@denx.de>
45623
45624 commit 497d012e5be0194e1084073d0081eb1a844796b2
45625 Author: Gary Jennejohn <garyj@pollux.denx.de>
45626 Date:   Mon Feb 12 13:11:50 2007 +0100
45627
45628     LPC2292: patch from Siemens.
45629
45630 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
45631 Author: Stefan Roese <sr@denx.de>
45632 Date:   Sat Feb 10 08:49:31 2007 +0100
45633
45634     [PATCH] Add missing p3mx.h file to repository (ups)
45635
45636     Signed-off-by: Stefan Roese <sr@denx.de>
45637
45638 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
45639 Author: Bartlomiej Sieka <tur@semihalf.com>
45640 Date:   Fri Feb 9 10:45:42 2007 +0100
45641
45642     [Motion-PRO] Preliminary support for the Motion-PRO board.
45643
45644 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
45645 Author: Stefan Roese <sr@denx.de>
45646 Date:   Wed Feb 7 16:51:08 2007 +0100
45647
45648     [PATCH] Update some AMCC 4xx board config files (set initrd_high)
45649
45650     Some boards that can have more than 768MBytes of SDRAM need to
45651     set "initrd_high", so that the initrd can be accessed by the
45652     Linux kernel.
45653
45654     Signed-off-by: Stefan Roese <sr@denx.de>
45655
45656 commit 7372ca68227930d03cffa548310524cad5b96733
45657 Author: Stefan Roese <sr@denx.de>
45658 Date:   Fri Feb 2 12:44:22 2007 +0100
45659
45660     [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
45661
45662     Previously the strapping DCR/SDR was read to determine if the internal PCI
45663     arbiter is enabled or not. This strapping bit can be overridden, so now
45664     the current status is read from the correct DCR/SDR register.
45665
45666     Signed-off-by: Stefan Roese <sr@denx.de>
45667
45668 commit 2aa54f651a42d198673318f07a20c89a43e4d197
45669 Author: Stefan Roese <sr@denx.de>
45670 Date:   Fri Feb 2 12:42:08 2007 +0100
45671
45672     [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
45673
45674     Signed-off-by: Stefan Roese <sr@denx.de>
45675
45676 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
45677 Author: Stefan Roese <sr@denx.de>
45678 Date:   Thu Feb 1 13:22:41 2007 +0100
45679
45680     [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
45681
45682     When PCI PNP is enabled the pci pnp configuration routine is called
45683     which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
45684     problems with some PCI cards. For now disable the PCI PNP configuration.
45685
45686     Signed-off-by: Stefan Roese <sr@denx.de>
45687
45688 commit 2902fadade3be7659467e8d074048c6b7068f5c0
45689 Author: Stefan Roese <sr@denx.de>
45690 Date:   Wed Jan 31 16:56:10 2007 +0100
45691
45692     [PATCH] Update 440EPx/440GRx cpu detection
45693
45694     Signed-off-by: Stefan Roese <sr@denx.de>
45695
45696 commit d5ea287b02a6945c3977410e364a879dd1a555c8
45697 Author: Stefan Roese <sr@denx.de>
45698 Date:   Wed Jan 31 16:38:04 2007 +0100
45699
45700     [PATCH] Update esd cpci5200 files
45701
45702     Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
45703
45704 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
45705 Author: Stefan Roese <sr@denx.de>
45706 Date:   Wed Jan 31 16:37:34 2007 +0100
45707
45708     [PATCH] Add support for esd mecp5200 board
45709
45710     Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
45711
45712 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
45713 Author: Stefan Roese <sr@denx.de>
45714 Date:   Wed Jan 31 12:38:50 2007 +0100
45715
45716     [PATCH] Remove unneccessary yellowstone board config file
45717
45718     Signed-off-by: Stefan Roese <sr@denx.de>
45719
45720 commit e802594b6fa1b166308820c276b96dc0d7cc731c
45721 Author: Stefan Roese <sr@denx.de>
45722 Date:   Tue Jan 30 17:06:10 2007 +0100
45723
45724     [PATCH] Update Sequoia (440EPx) config file
45725
45726     The config file now handles the 2nd target, the Rainier (440GRx)
45727     evaluation board better. Additionally the PPC input clock was
45728     adjusted to match the correct value of 33.0 MHz.
45729
45730     Signed-off-by: Stefan Roese <sr@denx.de>
45731
45732 commit 700200c67e73b83751418abe7815840dca8fd6cb
45733 Author: Stefan Roese <sr@denx.de>
45734 Date:   Tue Jan 30 17:04:19 2007 +0100
45735
45736     [PATCH] Merge Yosemite & Yellowstone board ports
45737
45738     Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
45739     share one config file and all board specific files. This way we
45740     don't have to maintain two different sets of files for nearly
45741     identical boards.
45742
45743     Signed-off-by: Stefan Roese <sr@denx.de>
45744
45745 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
45746 Author: Stefan Roese <sr@denx.de>
45747 Date:   Tue Jan 30 15:01:49 2007 +0100
45748
45749     [PATCH] Update Prodrive SCPU (PDNB3 variant) board
45750
45751     SCPU doesn't use redundant environment in flash.
45752
45753     Signed-off-by: Stefan Roese <sr@denx.de>
45754
45755 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
45756 Author: Stefan Roese <sr@denx.de>
45757 Date:   Tue Jan 30 12:51:07 2007 +0100
45758
45759     [PATCH] alpr: Update alpr board config file
45760
45761     Signed-off-by: Stefan Roese <sr@denx.de>
45762
45763 commit f8db84f132b1e335f20f96138a1f09ed97b08664
45764 Author: Wolfgang Denk <wd@pollux.denx.de>
45765 Date:   Tue Jan 30 00:50:40 2007 +0100
45766
45767     LPC2292 SODIMM port coding style cleanup.
45768
45769 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
45770 Author: Gary Jennejohn <garyj@pollux.denx.de>
45771 Date:   Wed Jan 24 12:16:56 2007 +0100
45772
45773     Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
45774
45775 commit 2daf046ba627f85f44195815778140039636244e
45776 Author: Bartlomiej Sieka <tur@semihalf.com>
45777 Date:   Tue Jan 23 17:22:06 2007 +0100
45778
45779     [iDMR] Add MTD and JFFS2 support, also add default partition definition.
45780
45781 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
45782 Author: Bartlomiej Sieka <tur@semihalf.com>
45783 Date:   Tue Jan 23 14:21:14 2007 +0100
45784
45785     [iDMR] Flash driver on initialisation write-protects some sectors,
45786     currently sectors 0-3. Sector 3 does not need to be protected, though
45787     (U-boot occupies sectors 0-1 and the environment sector 2). This commit
45788     fixes this, i.e., only sectors 0-2 are protected.
45789
45790 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
45791 Author: Bartlomiej Sieka <tur@semihalf.com>
45792 Date:   Tue Jan 23 14:11:22 2007 +0100
45793
45794     [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
45795     "mii device" results in "Unexpected exception"). Fixing this properly
45796     requires some clean-up in the FEC drivers infrastructure for ColdFire, so
45797     this commit disables MII commads for now.
45798
45799 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
45800 Author: Bartlomiej Sieka <tur@semihalf.com>
45801 Date:   Tue Jan 23 13:25:22 2007 +0100
45802
45803     [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
45804     Identification Register (CIR).
45805
45806 commit fdef388758506765d4d6a7155c8f1584c63ff581
45807 Author: roy zang <tie-fei.zang@freescale.com>
45808 Date:   Mon Jan 22 13:19:21 2007 +0800
45809
45810     use  CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
45811     The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
45812     fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
45813     mpc7448hpc2 board.
45814
45815 commit a4012396645533aef218354eeba754dff0deace8
45816 Author: Wolfgang Denk <wd@pollux.denx.de>
45817 Date:   Fri Jan 19 23:08:39 2007 +0100
45818
45819     Minor code cleanup.
45820
45821 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
45822 Author: Heiko Schocher <hs@pollux.denx.de>
45823 Date:   Fri Jan 19 19:57:10 2007 +0100
45824
45825     [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
45826
45827     Signed-off-by: Heiko Schocher <hs@denx.de>
45828
45829 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
45830 Author: Heiko Schocher <hs@pollux.denx.de>
45831 Date:   Fri Jan 19 18:05:26 2007 +0100
45832
45833     [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
45834                  if you must swap the bytes between reading/writing.
45835                  (Needed for the SC3 board)
45836
45837     Signed-off-by: Heiko Schocher <hs@denx.de>
45838
45839 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
45840 Author: Stefan Roese <sr@denx.de>
45841 Date:   Thu Jan 18 16:05:47 2007 +0100
45842
45843     [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
45844
45845     Signed-off-by: Stefan Roese <sr@denx.de>
45846
45847 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
45848 Author: Stefan Roese <sr@denx.de>
45849 Date:   Thu Jan 18 11:54:52 2007 +0100
45850
45851     [PATCH] Update Prodrive P3Mx support
45852
45853     Signed-off-by: Stefan Roese <sr@denx.de>
45854
45855 commit 34167a36c29ee946b727465db5c014746a08e978
45856 Author: Stefan Roese <sr@denx.de>
45857 Date:   Thu Jan 18 11:48:10 2007 +0100
45858
45859     [PATCH] Add missing Taishan config file
45860
45861     Signed-off-by: Stefan Roese <sr@denx.de>
45862
45863 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
45864 Author: Heiko Schocher <hs@pollux.denx.de>
45865 Date:   Thu Jan 18 11:28:51 2007 +0100
45866
45867     [PATCH] Fix: Compilerwarnings for SC3 board.
45868                  The EBC Configuration Register is now by CFG_EBC_CFG definable
45869                  Added JFFS2 support for the SC3 board.
45870
45871     Signed-off-by: Heiko Schocher <hs@denx.de>
45872
45873 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
45874 Author: Stefan Roese <sr@denx.de>
45875 Date:   Thu Jan 18 10:25:34 2007 +0100
45876
45877     [PATCH] Add support for AMCC Taishan PPC440GX eval board
45878
45879     Signed-off-by: Stefan Roese <sr@denx.de>
45880
45881 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
45882 Author: Wolfgang Denk <wd@pollux.denx.de>
45883 Date:   Tue Jan 16 18:30:50 2007 +0100
45884
45885     Raname solidcard3 into sc3; add redundant env for sc3
45886
45887 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
45888 Author: Wolfgang Denk <wd@pollux.denx.de>
45889 Date:   Tue Jan 16 12:46:35 2007 +0100
45890
45891     Update default environment for Solidcard3
45892
45893 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
45894 Author: Stefan Roese <sr@denx.de>
45895 Date:   Mon Jan 15 09:46:29 2007 +0100
45896
45897     [PATCH] Fix 440SPe rev B detection from previous patch
45898
45899     Signed-off-by: Stefan Roese <sr@denx.de>
45900
45901 commit a443d31410c571ee8f970da819a44d698fdd6b1f
45902 Author: Heiko Schocher <hs@pollux.denx.de>
45903 Date:   Sun Jan 14 13:35:31 2007 +0100
45904
45905         [FIX] correct I2C Writes for the LM81 Sensor.
45906
45907         Signed-off-by: Heiko Schocher <hs@denx.de>
45908
45909 commit 0bba5452835f19a61204edcda3a58112fd8e2208
45910 Author: Wolfgang Denk <wd@pollux.denx.de>
45911 Date:   Sat Jan 13 11:17:10 2007 +0100
45912
45913     Undo commit 3033ebb2: reset command does not take any arguments
45914
45915     Haiying Wang's modification to the reset command was broken, undo it.
45916
45917     Signed-off-by: Wolfgang Denk <wd@denx.de>
45918
45919 commit 95981778cff0038fd9941044d6a3eda810e33258
45920 Author: Stefan Roese <sr@denx.de>
45921 Date:   Sat Jan 13 08:01:03 2007 +0100
45922
45923     [PATCH] Update 440SP(e) cpu revisions
45924
45925     Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
45926
45927     Signed-off-by: Stefan Roese <sr@denx.de>
45928
45929 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
45930 Author: Stefan Roese <sr@denx.de>
45931 Date:   Sat Jan 13 07:59:56 2007 +0100
45932
45933     [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
45934
45935     Now the board revision and the current PCI bus speed are printed after
45936     the board message.
45937
45938     Also the EBC initialising is now done via defines in the board config
45939     file.
45940
45941     Signed-off-by: Stefan Roese <sr@denx.de>
45942
45943 commit 36adff362c2c0141ff8a810d42a7e478f779130f
45944 Author: Stefan Roese <sr@denx.de>
45945 Date:   Sat Jan 13 07:59:19 2007 +0100
45946
45947     [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
45948
45949     Now the board revision and the current PCI bus speed are printed after
45950     the board message.
45951
45952     Also the EBC initialising is now done via defines in the board config
45953     file.
45954
45955     Signed-off-by: Stefan Roese <sr@denx.de>
45956
45957 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
45958 Author: Stefan Roese <sr@denx.de>
45959 Date:   Sat Jan 13 07:57:51 2007 +0100
45960
45961     [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
45962
45963     Now the board revision and the current PCI bus speed are printed after
45964     the board message.
45965
45966     Signed-off-by: Stefan Roese <sr@denx.de>
45967
45968 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
45969 Author: Heiko Schocher <hs@pollux.denx.de>
45970 Date:   Thu Jan 11 15:44:44 2007 +0100
45971
45972         Added support for the SOLIDCARD III board from Eurodesign
45973
45974         Signed-off-by: Heiko Schocher <hs@denx.de>
45975
45976 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
45977 Author: Reinhard Thies <Reinhard.Thies@web.de>
45978 Date:   Wed Jan 10 14:41:14 2007 +0100
45979
45980     Adjusted default environment for cam5200 board.
45981
45982 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
45983 Author: Wolfgang Denk <wd@pollux.denx.de>
45984 Date:   Wed Jan 10 15:35:52 2007 +0100
45985
45986     Update CHANGELOG
45987
45988 commit 787fa15860a57833e50bd30555079a9cd4e519b8
45989 Author: Wolfgang Denk <wd@pollux.denx.de>
45990 Date:   Wed Jan 10 01:28:39 2007 +0100
45991
45992     Fix auto_update for MCC200 board.
45993
45994     The invocation of do_auto_update() is moved to the end of the
45995     misc_init_r() function, after the flash mappings have been
45996     initialized. Please find attached a patch that implements that
45997     change.
45998
45999     Also correct the decoding of the keypad status. With this update, the
46000     key that will trigger the update is Column 2, Row 2.
46001
46002 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
46003 Author: Marian Balakowicz <m8@semihalf.com>
46004 Date:   Wed Jan 10 00:26:15 2007 +0100
46005
46006     CAM5200 flash driver modifications:
46007     - use CFI driver (replaces custom flash driver) for main 'cam5200' target
46008     - add second build target 'cam5200_niosflash' which still uses custom driver
46009
46010 commit 67fea022fa957f59653b5238c7496f80a6b70432
46011 Author: Markus Klotzbuecher <mk@denx.de>
46012 Date:   Tue Jan 9 16:02:48 2007 +0100
46013
46014     SPC1920: cleanup memory contoller setup
46015
46016 commit 8fc2102faa23593c80381437c09f7745a14deb40
46017 Author: Markus Klotzbuecher <mk@denx.de>
46018 Date:   Tue Jan 9 14:57:14 2007 +0100
46019
46020     Fix the cpu speed setup to work with all boards.
46021
46022 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
46023 Author: Markus Klotzbuecher <mk@denx.de>
46024 Date:   Tue Jan 9 14:57:13 2007 +0100
46025
46026     SPC1920: add support for the FM18L08 Ramtron FRAM
46027
46028 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
46029 Author: Markus Klotzbuecher <mk@denx.de>
46030 Date:   Tue Jan 9 14:57:13 2007 +0100
46031
46032     SPC1920: update the HPI register addresses to work with the second
46033     generation of hardware
46034
46035 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
46036 Author: Markus Klotzbuecher <mk@creamnet.de>
46037 Date:   Tue Jan 9 14:57:13 2007 +0100
46038
46039     Miscellanious spc1920 related cleanups
46040
46041 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
46042 Author: Markus Klotzbuecher <mk@denx.de>
46043 Date:   Tue Jan 9 14:57:12 2007 +0100
46044
46045     SPC1920 GO/NOGO led should be set to color red in U-Boot
46046
46047 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
46048 Author: Markus Klotzbuecher <mk@creamnet.de>
46049 Date:   Tue Jan 9 14:57:12 2007 +0100
46050
46051     Add support for the DS3231 RTC
46052
46053 commit 8139567b60d678584b05f0718a681f2047c5e14f
46054 Author: Markus Klotzbuecher <mk@creamnet.de>
46055 Date:   Tue Jan 9 14:57:11 2007 +0100
46056
46057     SMC1 uses external CLK4 instead of BRG on spc1920
46058
46059 commit d8d9de1a02fbd880b613d607143d1f57342affc7
46060 Author: Markus Klotzbuecher <mk@creamnet.de>
46061 Date:   Tue Jan 9 14:57:10 2007 +0100
46062
46063     Update the SPC1920 CMB PLD driver
46064
46065 commit 3f34f869162750e5e999fd140f884f5de952bcfe
46066 Author: Markus Klotzbuecher <mk@creamnet.de>
46067 Date:   Tue Jan 9 14:57:10 2007 +0100
46068
46069     Add / enable I2C support on the spc1920 board
46070
46071 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
46072 Author: Markus Klotzbuecher <mk@creamnet.de>
46073 Date:   Tue Jan 9 14:57:10 2007 +0100
46074
46075     Add support for the tms320671x host port interface (HPI)
46076
46077 commit f4eb54529bb3664c3a562e488b460fe075f79d67
46078 Author: Wolfgang Denk <wd@pollux.denx.de>
46079 Date:   Sun Jan 7 00:13:11 2007 +0100
46080
46081     Prepare for release 1.2.0
46082
46083 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
46084 Author: Stefan Roese <sr@denx.de>
46085 Date:   Sat Jan 6 15:58:09 2007 +0100
46086
46087     [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
46088
46089     This patch fixes a problem with an incorrect setup for the refresh
46090     timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
46091
46092     Signed-off-by: Stefan Roese <sr@denx.de>
46093
46094 commit f16c1da9577f06c5fc08651a4065537407de4635
46095 Author: Stefan Roese <sr@denx.de>
46096 Date:   Sat Jan 6 15:56:13 2007 +0100
46097
46098     [PATCH] Update ALPR board files
46099
46100     This update brings the ALPR board support to the newest version.
46101     It also fixes a problem with the NAND driver.
46102
46103     Signed-off-by: Stefan Roese <sr@denx.de>
46104
46105 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
46106 Author: Stefan Roese <sr@denx.de>
46107 Date:   Fri Jan 5 11:46:05 2007 +0100
46108
46109     [PATCH] nand: Fix problem with oobsize calculation
46110
46111     Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
46112
46113     The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
46114     returns a 0x15. In the code fragment below bits [1:0] determine the
46115     page size, it is ANDed via "(extid & 0x3)" then shifted out. The
46116     next field is also ANDed with 0x3. However this is a one bit field
46117     as defined in the Hynix and Samsung parts in the 4th ID byte that
46118     determins the oobsize, not a two bit field. It works on Samsung as
46119     bits[3:2] are 01. However for the Hynix there is a 11 in these two
46120     bits, so the oob size gets messed up.
46121
46122     I checked the correct linux code and the suggested fix from Brian is
46123     also available in the linux nand mtd driver.
46124
46125     Signed-off-by: Stefan Roese <sr@denx.de>
46126
46127 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
46128 Author: Stefan Roese <sr@denx.de>
46129 Date:   Fri Jan 5 10:40:36 2007 +0100
46130
46131     [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
46132
46133     This fix will make the MAL burst disabling patch for the Linux
46134     EMAC driver obsolete.
46135
46136     Signed-off-by: Stefan Roese <sr@denx.de>
46137
46138 commit 023889838282b6237b401664f22dd22dfba2c066
46139 Author: Stefan Roese <sr@denx.de>
46140 Date:   Fri Jan 5 10:38:05 2007 +0100
46141
46142     [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
46143
46144     This code will optimize the DDR2 controller setup on a board specific
46145     basis.
46146
46147     Note: This code doesn't work right now on the NAND booting image for the
46148     Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
46149
46150     Signed-off-by: Stefan Roese <sr@denx.de>
46151
46152 commit cce4acbb68398634b8d011ed7bb0d12269c84230
46153 Author: Bartlomiej Sieka <tur@semihalf.com>
46154 Date:   Thu Dec 28 19:08:21 2006 +0100
46155
46156     Few V38B changes:
46157       - fix a typo in V38B config file
46158       - move watchdog initialisation earlier in the boot process
46159       - add "wdt=off" to default kernel command line (disables kernel watchdog)
46160
46161 commit 92eb729bad876725aeea908d2addba0800620840
46162 Author: Wolfgang Denk <wd@pollux.denx.de>
46163 Date:   Wed Dec 27 01:26:13 2006 +0100
46164
46165     Fix bug in adaption of Stefano Babic's CFI driver patch.
46166
46167 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
46168 Author: Wolfgang Denk <wd@pollux.denx.de>
46169 Date:   Sun Dec 24 01:42:57 2006 +0100
46170
46171     Minor code cleanup.
46172
46173 commit d784fdb05900ada3686d5778783e1fb328e9fb66
46174 Author: Stefano Babic <sbabic@denx.de>
46175 Date:   Tue Dec 12 00:22:42 2006 +0100
46176
46177     Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
46178
46179 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
46180 Author: Stefan Roese <sr@denx.de>
46181 Date:   Fri Dec 22 14:29:40 2006 +0100
46182
46183     [PATCH] Fix sequoia flash autodetection (finally correct)
46184
46185     Now 32MByte and 64MByte FLASH is know to work and other
46186     configurations should work too.
46187
46188     Signed-off-by: Stefan Roese <sr@denx.de>
46189
46190 commit 82e5236a8b719543643fd26d5827938ab2b94818
46191 Author: Wolfgang Denk <wd@pollux.denx.de>
46192 Date:   Fri Dec 22 10:30:26 2006 +0100
46193
46194     Minor code cleanup; update CHANGELOG.
46195
46196 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
46197 Author: Heiko Schocher <hs@pollux.denx.de>
46198 Date:   Thu Dec 21 17:17:02 2006 +0100
46199
46200     Added support for the TQM8272 board from TQ
46201
46202     Signed-off-by: Heiko Schocher <hs@denx.de>
46203
46204 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
46205 Author: Heiko Schocher <hs@pollux.denx.de>
46206 Date:   Thu Dec 21 16:14:48 2006 +0100
46207
46208     [PATCH] Add support for the UC101 board from MAN.
46209
46210     Signed-off-by: Heiko Schocher <hs@denx.de>
46211
46212 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
46213 Author: Bartlomiej Sieka <tur@semihalf.com>
46214 Date:   Wed Dec 20 00:29:43 2006 +0100
46215
46216     Fix to make the baudrate changes immediate for the MCF52x2 family.
46217
46218 commit daa6e418bcc0c717752e8de939c213c790286096
46219 Author: Bartlomiej Sieka <tur@semihalf.com>
46220 Date:   Wed Dec 20 00:27:32 2006 +0100
46221
46222     Preliminary support for the iDMR board (ColdFire).
46223
46224 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
46225 Author: Andrei Safronov <safronov@pollux.denx.de>
46226 Date:   Fri Dec 8 16:23:08 2006 +0100
46227
46228     automatic update mechanism
46229
46230 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
46231 Author: roy zang <tie-fei.zang@freescale.com>
46232 Date:   Mon Dec 4 17:56:59 2006 +0800
46233
46234     Slight code clean up.
46235     Add comments, delete duplicate define and remove spaces.
46236     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
46237
46238 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
46239 Author: roy zang <tie-fei.zang@freescale.com>
46240 Date:   Mon Dec 4 17:54:21 2006 +0800
46241
46242     Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
46243     multiplier table can not refect the real PLL clock behavior of these
46244     processors. Please refer to the hardware specification for detailed
46245     information of the corresponding processors.
46246     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
46247
46248 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
46249 Author: roy zang <tie-fei.zang@freescale.com>
46250 Date:   Mon Dec 4 14:46:23 2006 +0800
46251
46252     Remove the static MAC address, ip address, server ip, netmask and
46253     gateway ip for network setting.
46254     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
46255
46256 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
46257 Author: roy zang <tie-fei.zang@freescale.com>
46258 Date:   Mon Dec 4 14:33:08 2006 +0800
46259
46260     Remove the duplicate memory test code for mpc744ihpc2 board.
46261     If a memory test is needed, please use the functions in
46262     post/memory.c or memtest command.
46263     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
46264
46265 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
46266 Author: roy zang <tie-fei.zang@freescale.com>
46267 Date:   Fri Dec 1 19:01:25 2006 +0800
46268
46269     Fix the exception occuring in RAM table search issue.
46270     The original search_one_table() function code can only processes the search
46271     for the exception occurring in FLASH/ROM, because the exception and fixup
46272     table usually locate in FLASH. If the exception address is also in
46273     FLASH, it will be OK.
46274     If the exception occurs in RAM, after the u-boot relocation, a
46275     relocation offset should be added.
46276
46277     clean up the code in cpu/74xx_7xx/cpu.c
46278
46279     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
46280
46281 commit ee311214e0d216f904feea269599d0934bf71f23
46282 Author: roy zang <tie-fei.zang@freescale.com>
46283 Date:   Fri Dec 1 11:47:36 2006 +0800
46284
46285     Clean up the code according to codestyle:
46286     (1) remove some C++ comments.
46287     (2) remove trailing white space.
46288     (3) remove trailing empty line.
46289     (4) Indentation by table.
46290     (5) remove {} in one line condition.
46291     (6) add space before '(' in function call.
46292     Remove some weird printf () output.
46293     Add necessary comments.
46294     Modified Makefile to support building in a separate directory.
46295
46296 commit dd520bf314c7add4183c5191692180f576f96b60
46297 Author: Wolfgang Denk <wd@pollux.denx.de>
46298 Date:   Thu Nov 30 18:02:20 2006 +0100
46299
46300     Code cleanup.
46301
46302 commit 8d9a8610b8256331132227e9e6585c6bd5742787
46303 Author: Wolfgang Denk <wd@pollux.denx.de>
46304 Date:   Thu Nov 30 01:54:07 2006 +0100
46305
46306     Code cleanup. Update CHANGELOG.
46307
46308 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
46309 Author: Grant Likely <grant.likely@secretlab.ca>
46310 Date:   Wed Nov 29 16:23:42 2006 +0100
46311
46312     [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
46313
46314     The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
46315     not the XLB frequency.
46316
46317     This patch depends on the previous patches for MPC52xx device tree support
46318
46319     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46320     Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
46321
46322 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
46323 Author: Stefan Roese <sr@denx.de>
46324 Date:   Wed Nov 29 15:42:37 2006 +0100
46325
46326     [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
46327
46328     This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
46329     and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
46330     quite similar and share the same board directory "prodrive/p3mx"
46331     and the same config file "p3mx.h".
46332
46333     Signed-off-by: Stefan Roese <sr@denx.de>
46334
46335 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
46336 Author: Stefan Roese <sr@denx.de>
46337 Date:   Wed Nov 29 12:53:15 2006 +0100
46338
46339     [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
46340
46341     In the bootvx command the load address was only read from the env
46342     variable "loadaddr" and not optionally passed as paramter as described
46343     in the help. This is fixed with this patch. The behaviour is now the
46344     same as in the bootelf command.
46345
46346     Signed-off-by: Stefan Roese <sr@denx.de>
46347
46348 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
46349 Author: Stefan Roese <sr@denx.de>
46350 Date:   Wed Nov 29 12:03:57 2006 +0100
46351
46352     [PATCH] include/ppc440.h minor error affecting interrupts
46353
46354     Fixed include/ppc440.c for UIC address Bug
46355
46356     Corrects bug affecting the addresses for the universal interrupt
46357     controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
46358
46359     Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
46360     Signed-off-by: Stefan Roese <sr@denx.de>
46361
46362 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
46363 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
46364 Date:   Tue Nov 28 16:17:27 2006 -0600
46365
46366     Make fsl-i2c not conflict with SOFT I2C
46367
46368     Signed-off-by: Timur Tabi <timur@freescale.com>
46369
46370 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
46371 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
46372 Date:   Tue Nov 28 16:17:18 2006 -0600
46373
46374     Fix I2C master address initialization.
46375
46376     Signed-off-by: Timur Tabi <timur@freescale.com>
46377
46378 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
46379 Author: Kim Phillips <kim.phillips@freescale.com>
46380 Date:   Tue Nov 28 23:31:19 2006 -0600
46381
46382     Assign maintainers for mpc8349emds and mpc8360emds
46383
46384     Dave for mpc8360emds, and me for mpc8349emds.
46385
46386 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
46387 Author: Kim Phillips <kim.phillips@freescale.com>
46388 Date:   Tue Nov 28 23:28:33 2006 -0600
46389
46390     Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
46391
46392     give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
46393     since they are passed by reference to ucc_get_cmxucr_reg and assigned.
46394
46395 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
46396 Author: Timur Tabi <timur@freescale.com>
46397 Date:   Tue Nov 28 12:09:35 2006 -0600
46398
46399     mpc83xx: Miscellaneous code style fixes
46400
46401     Implement various code style fixes and similar changes.
46402
46403     Signed-off-by: Timur Tabi <timur@freescale.com>
46404
46405 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
46406 Author: Stefan Roese <sr@denx.de>
46407 Date:   Tue Nov 28 17:55:49 2006 +0100
46408
46409     [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
46410
46411     This patch adds the code and configuration necessary to boot with an
46412     arch/powerpc Linux kernel.
46413
46414     Signed-off-by: Grant Likely <grant.likely@gmail.com>
46415     Acked-by: Jon Loeliger <jdl@freescale.com>
46416
46417 commit e732faec95a83cb468b4850ae807c8301dde8f6a
46418 Author: Stefan Roese <sr@denx.de>
46419 Date:   Tue Nov 28 16:09:24 2006 +0100
46420
46421     [PATCH] PPC4xx: 440SP Rev. C detection added
46422
46423     Signed-off-by: Stefan Roese <sr@denx.de>
46424
46425 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
46426 Author: Stefan Roese <sr@denx.de>
46427 Date:   Tue Nov 28 11:04:45 2006 +0100
46428
46429     [PATCH] nand: Fix patch merge problem
46430
46431     Signed-off-by: Stefan Roese <sr@denx.de>
46432
46433 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
46434 Author: Stefan Roese <sr@denx.de>
46435 Date:   Tue Nov 28 11:04:45 2006 +0100
46436
46437     [PATCH] nand: Fix patch merge problem
46438
46439     Signed-off-by: Stefan Roese <sr@denx.de>
46440
46441 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
46442 Author: Wolfgang Denk <wd@pollux.denx.de>
46443 Date:   Mon Nov 27 22:53:53 2006 +0100
46444
46445     Update CHANGELOG
46446
46447 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
46448 Author: Stefan Roese <sr@denx.de>
46449 Date:   Mon Nov 27 17:43:25 2006 +0100
46450
46451     [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
46452
46453     Patch below corrects the setting of the zmiifer register, it was
46454     overwritting the register rather than ORing the settings.
46455
46456     Signed-off-by: Neil Wilson <NWilson@airspan.com>
46457     Signed-off-by: Stefan Roese <sr@denx.de>
46458
46459 commit d1a72545296800b7e219f93104ad5836f0003d66
46460 Author: Stefan Roese <sr@denx.de>
46461 Date:   Mon Nov 27 17:34:10 2006 +0100
46462
46463     [PATCH] Select NAND embedded environment from board configuration
46464
46465     The current NAND Bootloader setup forces the environment
46466     variables to be in line with the bootloader. This change
46467     enables the configuration to be made in the board include
46468     file instead so that it can be individually enabled.
46469
46470     Signed-off-by: Nick Spence <nick.spence@freescale.com>
46471     Signed-off-by: Stefan Roese <sr@denx.de>
46472
46473 commit 15784862857c3c2214498defcfed84ff137fb81e
46474 Author: Stefan Roese <sr@denx.de>
46475 Date:   Mon Nov 27 17:22:19 2006 +0100
46476
46477     [PATCH] nand_wait() timeout fixes
46478
46479     Two fixes for the nand_wait() function in
46480     drivers/nand/nand_base.c:
46481
46482     1. Use correct timeouts. The original timeouts in Linux
46483     source are 400ms and 20ms not 40s and 20s
46484
46485     2. Return correct error value in case of timeout. 0 is
46486     interpreted as OK.
46487
46488     Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
46489     Signed-off-by: Stefan Roese <sr@denx.de>
46490
46491 commit da5553b095bf04f4f109ad7e565dae3aba47b230
46492 Author: Stefan Roese <sr@denx.de>
46493 Date:   Mon Nov 27 17:04:06 2006 +0100
46494
46495     [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
46496
46497     This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
46498     arguments to bootm.  It removes the getenv("disable_of") test that used
46499     to be used for this purpose.
46500
46501     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46502     Acked-by: Jon Loeliger <jdl@freescale.com>
46503
46504 commit a9398e018593782c5fa7d0741955fc1256b34c1e
46505 Author: Wolfgang Denk <wd@pollux.denx.de>
46506 Date:   Mon Nov 27 15:32:42 2006 +0100
46507
46508     Minor code cleanup. Update CHANGELOG.
46509
46510 commit 1729b92cde575476684bffe819d0b7791b57bff2
46511 Author: Stefan Roese <sr@denx.de>
46512 Date:   Mon Nov 27 14:52:04 2006 +0100
46513
46514     [PATCH] 4xx: Fix problem with board specific reset code (now for real)
46515
46516     Signed-off-by: Stefan Roese <sr@denx.de>
46517
46518 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
46519 Author: Stefan Roese <sr@denx.de>
46520 Date:   Mon Nov 27 14:49:51 2006 +0100
46521
46522     [PATCH] alpr: remove unused board specific flash driver
46523
46524     Signed-off-by: Stefan Roese <sr@denx.de>
46525
46526 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
46527 Author: Stefan Roese <sr@denx.de>
46528 Date:   Mon Nov 27 14:48:41 2006 +0100
46529
46530     [PATCH] 4xx: Fix problem with board specific reset code
46531
46532     Signed-off-by: Stefan Roese <sr@denx.de>
46533
46534 commit ec0c2ec725aec9524a177a77ce75559e644a931a
46535 Author: Stefan Roese <sr@denx.de>
46536 Date:   Mon Nov 27 14:46:06 2006 +0100
46537
46538     [PATCH] Remove testing 4xx enet PHY setup
46539
46540     Signed-off-by: Stefan Roese <sr@denx.de>
46541
46542 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
46543 Author: Stefan Roese <sr@denx.de>
46544 Date:   Mon Nov 27 14:12:17 2006 +0100
46545
46546     [PATCH] Update Prodrive ALPR board support (440GX)
46547
46548     Signed-off-by: Stefan Roese <sr@denx.de>
46549
46550 commit 58b485776698c3d71ec5a215e392123b4c15afa3
46551 Author: Markus Klotzbuecher <mk@denx.de>
46552 Date:   Mon Nov 27 11:51:21 2006 +0100
46553
46554     Add a small README with information on the generic ohci driver.
46555
46556 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
46557 Author: Markus Klotzbuecher <mk@denx.de>
46558 Date:   Mon Nov 27 11:46:46 2006 +0100
46559
46560     Fix some endianness issues related to the generic ohci driver
46561
46562 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
46563 Author: Markus Klotzbuecher <mk@denx.de>
46564 Date:   Mon Nov 27 11:44:58 2006 +0100
46565
46566     Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
46567     to choose between the old and the generic OHCI drivers.
46568
46569 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
46570 Author: Markus Klotzbuecher <mk@denx.de>
46571 Date:   Mon Nov 27 11:43:09 2006 +0100
46572
46573     Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
46574     and adapted board configs TQM5200 and yosemite accordingly. This commit
46575     also makes the maximum number of root hub ports configurable
46576     (CFG_USB_OHCI_MAX_ROOT_PORTS).
46577
46578 commit 78d620ebb5871d252270dedfad60c6568993b780
46579 Author: Wolfgang Denk <wd@atlas.denx.de>
46580 Date:   Thu Nov 23 22:58:58 2006 +0100
46581
46582     Updates for TQM5200 modules:
46583     - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
46584     - simplify "udate" definitions
46585
46586 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
46587 Author: Stefan Roese <sr@denx.de>
46588 Date:   Wed Nov 22 13:20:50 2006 +0100
46589
46590     [PATCH] PPC4xx start.S: Fix for processor errata
46591
46592     Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
46593     errata 1.12: 440_33 by moving patch up in code.
46594
46595     Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
46596     Signed-off-by: Stefan Roese <sr@denx.de>
46597
46598 commit 4ef6251403f637841000e0fef9e832aa01339822
46599 Author: Stefan Roese <sr@denx.de>
46600 Date:   Mon Nov 20 20:39:52 2006 +0100
46601
46602     [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
46603
46604     Signed-off-by: Stefan Roese <sr@denx.de>
46605
46606 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
46607 Author: Wolfgang Denk <wd@pollux.denx.de>
46608 Date:   Mon Nov 20 10:28:30 2006 +0100
46609
46610     Update CHANGELOG
46611
46612 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
46613 Author: Stefan Roese <sr@denx.de>
46614 Date:   Mon Nov 13 13:55:24 2006 +0100
46615
46616     [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
46617
46618        * Adds support for AMD command set Top Boot flash geometry reversal
46619        * Adds support for reading JEDEC Manufacturer ID and Device ID
46620        * Adds support for displaying command set, manufacturer id and
46621          device ids (flinfo)
46622        * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
46623        * Removes outdated change history (refer to git log instead)
46624
46625     Signed-off-by: Tolunay Orkun <listmember@orkun.us>
46626     Signed-off-by: Stefan Roese <sr@denx.de>
46627
46628 commit b21b511d4c50408f4853f46f06b601272196223f
46629 Author: Wolfgang Denk <wd@pollux.denx.de>
46630 Date:   Sun Nov 12 21:13:23 2006 +0100
46631
46632     Update CHANGELOG
46633
46634 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
46635 Author: Bartlomiej Sieka <tur@semihalf.com>
46636 Date:   Sat Nov 11 22:48:22 2006 +0100
46637
46638     Disable the watchdog in the default config for the V38B board.
46639
46640 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
46641 Author: Bartlomiej Sieka <tur@semihalf.com>
46642 Date:   Sat Nov 11 22:43:00 2006 +0100
46643
46644     Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
46645     group is enabled for USB earlier (in cpu_init_f() instead of
46646     usb_lowlevel_init()).
46647
46648 commit 91650b3e4de688038d4f71279c44858e3e2c6870
46649 Author: Wolfgang Denk <wd@pollux.denx.de>
46650 Date:   Mon Nov 6 17:06:36 2006 +0100
46651
46652     Sequential accesses to non-existent memory must be synchronized,
46653     at least on G2 cores.
46654
46655     This fixes get_ram_size() problems on MPC5200 Rev. B boards.
46656
46657 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
46658 Author: Timur Tabi <timur@freescale.com>
46659 Date:   Fri Nov 3 19:15:00 2006 -0600
46660
46661     mpc83xx: Update 83xx to use fsl_i2c.c
46662
46663     Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
46664     cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
46665     Added multiple I2C bus support to fsl_i2c.c.
46666
46667     Signed-off-by: Timur Tabi <timur@freescale.com>
46668
46669 commit d239d74b1c937984bc519083a8e7de373a390f06
46670 Author: Timur Tabi <timur@freescale.com>
46671 Date:   Fri Nov 3 12:00:28 2006 -0600
46672
46673     mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
46674
46675     Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
46676     tree matches the other 8xxx trees.
46677
46678     Signed-off-by: Timur Tabi <timur@freescale.com>
46679
46680 commit f7fb2e703ec9688541416962724adff70a7322cb
46681 Author: Kim Phillips <kim.phillips@freescale.com>
46682 Date:   Thu Nov 2 19:47:11 2006 -0600
46683
46684     mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
46685
46686 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
46687 Author: Dave Liu <daveliu@freescale.com>
46688 Date:   Thu Nov 2 18:05:50 2006 -0600
46689
46690     mpc83xx: Fix the incorrect dcbz operation
46691
46692     The 834x rev1.x silicon has one CPU5 errata.
46693
46694     The issue is when the data cache locked with
46695     HID0[DLOCK], the dcbz instruction looks like no-op inst.
46696
46697     The right behavior of the data cache is when the data cache
46698     Locked with HID0[DLOCK], the dcbz instruction allocates
46699     new tags in cache.
46700
46701     The 834x rev3.0 and later and 8360 have not this bug inside.
46702
46703     So, when 834x rev3.0/8360 are working with ECC, the dcbz
46704     instruction will corrupt the stack in cache, the processor will
46705     checkstop reset.
46706
46707     However, the 834x rev1.x can work with ECC with these code,
46708     because the sillicon has this cache bug. The dcbz will not
46709     corrupt the stack in cache.
46710     Really, it is the fault code running on fault sillicon.
46711
46712     This patch fix the incorrect dcbz operation. Instead of
46713     CPU FP writing to initialise the ECC.
46714
46715     CHANGELOG:
46716     * Fix the incorrect dcbz operation instead of CPU FP
46717     writing to initialise the ECC memory. Otherwise, it
46718     will corrupt the stack in cache, The processor will checkstop
46719     reset.
46720
46721     Signed-off-by: Dave Liu <daveliu@freescale.com>
46722
46723 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
46724 Author: Kim Phillips <kim.phillips@freescale.com>
46725 Date:   Wed Nov 1 00:10:40 2006 -0600
46726
46727     mpc83xx: add OF_FLAT_TREE bits to 83xx boards
46728
46729     add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
46730     STDOUT_PATH configuration bits to mpc8349emds,
46731     mpc8349itx, and mpc8360emds board code.
46732
46733     redo environment to use bootm with the fdtaddr
46734     for booting ARCH=powerpc kernels by default,
46735     and provide default fdtaddr values.
46736
46737 commit 48041365b3420589ad464ebc7752e0053538b729
46738 Author: Kim Phillips <kim.phillips@freescale.com>
46739 Date:   Wed Nov 1 00:07:25 2006 -0600
46740
46741     mpc83xx: change ft code to modify local-mac-address property
46742
46743     Update 83xx OF code to update local-mac-address properties
46744     for ethernet instead of the obsolete 'address' property.
46745
46746 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
46747 Author: Timur Tabi <timur@freescale.com>
46748 Date:   Tue Oct 31 21:23:16 2006 -0600
46749
46750     mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
46751
46752     This patch also adds an improved I2C set_speed(), which handles all clock
46753     frequencies.
46754
46755     Signed-off-by: Timur Tabi <timur@freescale.com>
46756
46757 commit ac4b5622ce050b5ee1e154b98df630d778661632
46758 Author: Dave Liu <daveliu@freescale.com>
46759 Date:   Tue Oct 31 19:54:59 2006 -0600
46760
46761     mpc83xx: add the README.mpc8360emds
46762
46763     add doc/README.mpc8360emds to accompany the new board support
46764
46765 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
46766 Author: Dave Liu <daveliu@freescale.com>
46767 Date:   Fri Nov 3 12:11:15 2006 -0600
46768
46769     mpc83xx: add QE ethernet support
46770
46771     this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
46772
46773 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
46774 Author: Dave Liu <daveliu@freescale.com>
46775 Date:   Fri Nov 3 19:33:44 2006 -0600
46776
46777     mpc83xx: Add MPC8360EMDS basic board support
46778
46779     Add support for the Freescale MPC8360EMDS board.
46780     Includes DDR, DUART, Local Bus, PCI.
46781
46782 commit 23892e49352de74f7fac36ff90bb1be143d195e3
46783 Author: Dave Liu <daveliu@freescale.com>
46784 Date:   Tue Oct 31 19:30:40 2006 -0600
46785
46786     mpc83xx: add the QUICC Engine (QE) immap file
46787
46788     common QE immap file.  Also required for 8360.
46789
46790 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
46791 Author: Dave Liu <daveliu@freescale.com>
46792 Date:   Tue Oct 31 19:25:38 2006 -0600
46793
46794     mpc83xx: Add 8360 specifics to 83xx immap
46795
46796     Mainly add QE device dependencies, with appropriate 8360 protection.
46797     Lindent also run.
46798
46799 commit 988833324a7fda482c8ac3ca23eb539f8232e404
46800 Author: Timur Tabi <timur@freescale.com>
46801 Date:   Tue Oct 31 19:14:41 2006 -0600
46802
46803     mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
46804
46805     PREREQUISITE PATCHES:
46806
46807     * This patch can only be applied after the following patches have been applied:
46808
46809       1) DNX#2006092142000015 "Add support for the MPC8349E-mITX  1/2"
46810       2) DNX#2006092142000024 "Add support for the MPC8349E-mITX  2/2"
46811
46812     CHANGELOG:
46813
46814     * For the 8349E-mITX, fix some size values in pci_init_board(), enable
46815       the clock for the 2nd USB board (Linux kernel will hang otherwise),
46816       and fix the CONFIG_BOOTARGS macro.
46817
46818     Signed-off-by: Timur Tabi <timur@freescale.com>
46819
46820 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
46821 Author: Timur Tabi <timur@freescale.com>
46822 Date:   Tue Oct 31 18:44:42 2006 -0600
46823
46824     mpc83xx: Add support for the MPC8349E-mITX
46825
46826     PREREQUISITE PATCHES:
46827
46828     * This patch can only be applied after the following patches have been applied:
46829
46830       1) DNX#2006090742000024 "Add support for multiple I2C buses"
46831       2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
46832       3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
46833       4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
46834       5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
46835
46836     CHANGELOG:
46837
46838     * Add support for the Freescale MPC8349E-mITX reference design platform.
46839       The second TSEC (Vitesse 7385 switch) is not supported at this time.
46840
46841     Signed-off-by: Timur Tabi <timur@freescale.com>
46842
46843 commit 183da6d9b446cc12123455844ad1187e2375626f
46844 Author: Ben Warren <bwarren@qstreams.com>
46845 Date:   Tue Sep 12 10:15:53 2006 -0400
46846
46847     Additional MPC8349 support for multibus i2c
46848
46849     Hello,
46850
46851     Here is a patch for a file that was accidentally left out of a previous
46852     attempt.
46853
46854     It accompanies the patch with ticket DNX#2006090742000024
46855
46856     CHANGELOG:
46857             Change PCI initialization to use new multi-bus I2C API.
46858
46859     regards,
46860     Ben
46861
46862 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
46863 Author: Ben Warren <bwarren@qstreams.com>
46864 Date:   Thu Sep 7 16:51:04 2006 -0400
46865
46866     Multi-bus I2C implementation of MPC834x
46867
46868     Hello,
46869
46870     Attached is a patch implementing multiple I2C buses on the MPC834x CPU
46871     family and the MPC8349EMDS board in particular.
46872     This patch requires Patch 1 (Add support for multiple I2C buses).
46873     Testing was performed on a 533MHz board.
46874
46875     /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
46876
46877     Signed-off-by: Ben Warren <bwarren@qstreams.com>
46878
46879     CHANGELOG:
46880             Implemented driver-level code to support two I2C buses on the
46881     MPC834x CPU family and the MPC8349EMDS board.  Available I2C bus speeds
46882     are 50kHz, 100kHz and 400kHz on each bus.
46883
46884     regards,
46885     Ben
46886
46887 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
46888 Author: Ben Warren <bwarren@qstreams.com>
46889 Date:   Thu Sep 7 16:50:54 2006 -0400
46890
46891     Add support for multiple I2C buses
46892
46893     Hello,
46894
46895     Attached is a patch providing support for multiple I2C buses at the
46896     command level.  The second part of the patch includes an implementation
46897     for the MPC834x CPU and MPC8349EMDS board.
46898
46899     /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
46900
46901     Signed-off-by: Ben Warren <bwarren@qstreams.com>
46902
46903     Overview:
46904
46905     1. Include new 'i2c' command (based on USB implementation) using
46906     CONFIG_I2C_CMD_TREE.
46907
46908     2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS.  Note that
46909     the commands to change bus number and speed are only available under the
46910     new 'i2c' command mentioned in the first bullet.
46911
46912     3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
46913     systems.  When CONFIG_I2C_MULTI_BUS is used, this option takes the form
46914     of an array of bus-device pairs.  Otherwise, it is an array of uchar.
46915
46916     CHANGELOG:
46917             Added new 'i2c' master command for all I2C interaction.  This is
46918     conditionally compiled with CONFIG_I2C_CMD_TREE.  New commands added for
46919     setting I2C bus speed as well as changing the active bus if the board
46920     has more than one (conditionally compiled with
46921     CONFIG_I2C_MULTI_BUS).  Updated NOPROBE logic to handle multiple buses.
46922     Updated README.
46923
46924     regards,
46925     Ben
46926
46927 commit bed85caf872714ebf53013967a695c9d63acfc68
46928 Author: Timur Tabi <timur@freescale.com>
46929 Date:   Tue Oct 31 18:13:36 2006 -0600
46930
46931     mpc83xx: Add support for Errata DDR6 on MPC 834x systems
46932
46933     CHANGELOG:
46934
46935     * Errata DDR6, which affects all current MPC 834x processors, lists changes
46936       required to maintain compatibility with various types of DDR memory.  This
46937       patch implements those changes.
46938
46939     Signed-off-by: Timur Tabi <timur@freescale.com>
46940
46941 commit afd6e470f639883002c7c59d562690a5cb0f4865
46942 Author: Timur Tabi <timur@freescale.com>
46943 Date:   Wed Oct 25 18:45:23 2006 -0500
46944
46945     mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
46946
46947 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
46948 Author: Timur Tabi <timur@freescale.com>
46949 Date:   Tue Aug 22 17:07:00 2006 -0500
46950
46951     mpc83xx: Add support for variable flash memory sizes on 83xx systems
46952
46953     CHANGELOG:
46954
46955     * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
46956        window registers, instead of using a hard-coded value of 8MB.
46957
46958     Signed-off-by: Timur Tabi <timur@freescale.com>
46959
46960 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
46961 Author: Tanya Jiang <tanya.jiang@freescale.com>
46962 Date:   Thu Aug 3 18:38:13 2006 +0800
46963
46964     mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
46965
46966     Unified TQM834x variable names with 83xx and consolidated macro
46967     in preparation for the 8360 and other upcoming 83xx devices.
46968
46969     Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
46970
46971 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
46972 Author: Dave Liu <daveliu@freescale.com>
46973 Date:   Wed Oct 25 14:41:21 2006 -0500
46974
46975     mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
46976
46977     Incorporated the common unified variable names and the changes in preparation
46978     for releasing mpc8360 patches.
46979
46980     Signed-off-by: Dave Liu <daveliu@freescale.com>
46981
46982 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
46983 Author: Tanya Jiang <tanya.jiang@freescale.com>
46984 Date:   Thu Aug 3 18:36:02 2006 +0800
46985
46986     mpc83xx: Fix missing build for mpc8349emds pci.c
46987
46988     Make pci build for mpc8349emds
46989
46990     Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
46991
46992 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
46993 Author: Tanya Jiang <tanya.jiang@freescale.com>
46994 Date:   Thu Aug 3 18:39:49 2006 +0800
46995
46996     mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
46997
46998     Removed unused file resetvec.S for mpc83xx cpu
46999
47000     Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
47001
47002 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
47003 Author: Nick Spence <Nick.Spence@freescale.com>
47004 Date:   Sat Sep 30 00:32:59 2006 -0700
47005
47006     NAND Flash verify across block boundaries
47007
47008     This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
47009     defined
47010     and the write crosses a block boundary. The pointer to the verification
47011     buffer (bufstart) is not being updated to reflect the starting of the
47012     new
47013     block so the verification of the second block fails.
47014
47015     CHANGELOG:
47016
47017     * Fix NAND FLASH page verification across block boundaries
47018
47019 commit f484dc791a3932537213c43c654cc1295c64b84c
47020 Author: Nick Spence <nick.spence@freescale.com>
47021 Date:   Thu Sep 7 07:39:46 2006 -0700
47022
47023     Added RGMII support to the TSECs and Marvell 881111 Phy
47024
47025     Added a phy initialization to adjust the RGMII RX and TX timing
47026     Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
47027
47028     Signed-off-by: Nick Spence <nick.spence@freescale.com>
47029
47030 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
47031 Author: roy zang <tie-fei.zang@freescale.com>
47032 Date:   Fri Nov 3 13:10:00 2006 +0800
47033
47034     Remove some unused CFG define.
47035     undef CFG_DRAM_TEST
47036
47037 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
47038 Author: roy zang <tie-fei.zang@freescale.com>
47039 Date:   Fri Nov 3 13:07:36 2006 +0800
47040
47041     Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
47042     Both work. 0xFF000000 seems more reasonable.
47043
47044 commit c59200443072353044aa4bf737a5a60f9a9af231
47045 Author: Wolfgang Denk <wd@pollux.denx.de>
47046 Date:   Thu Nov 2 15:15:01 2006 +0100
47047
47048     Release U-Boot 1.1.6
47049
47050 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
47051 Author: roy zang <tie-fei.zang@freescale.com>
47052 Date:   Thu Nov 2 19:14:48 2006 +0800
47053
47054     This patch comes from Yuli's posted patch on 8/8/2006
47055     titled "CFI Driver Little-Endian write Issue".
47056
47057     http://sourceforge.net/mailarchive/message.php?msg_id=36311999
47058
47059     If that patch applied, please discard this one.
47060     Until now , I do not see his patch is applied. So please apply this one.
47061
47062     Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
47063     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47064
47065 commit b825f158e449e1e9cf74c08e572955e122394c96
47066 Author: roy zang <tie-fei.zang@freescale.com>
47067 Date:   Thu Nov 2 19:12:31 2006 +0800
47068
47069     Tsi108 on chip i2c support.
47070
47071     The i2c  Interface provides a master-only, serial interface that can be
47072     used for initializing Tsi108/Tsi109 registers from an EEPROM after a
47073     device reset.
47074
47075     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47076     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47077
47078 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
47079 Author: roy zang <tie-fei.zang@freescale.com>
47080 Date:   Thu Nov 2 19:11:06 2006 +0800
47081
47082     Tsi108 on chip pci controller support.
47083
47084     If there is no pci card, the tsi108/109 pci configure read will
47085     cause a machine check exception to the processor. PCI error should
47086     also be cleared after the read.
47087
47088     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47089     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47090
47091 commit d1927cee977126e547ceeba23e4f978f377cfb8f
47092 Author: roy zang <tie-fei.zang@freescale.com>
47093 Date:   Thu Nov 2 19:08:55 2006 +0800
47094
47095     Tundra tsi108 on chip Ethernet controller support.
47096
47097     The following is a brief description of the Ethernet controller:
47098     The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
47099     Gigabit Ethernet ports,E0 and E1.  It uses a single Management interface
47100     to manage the two physical connection devices (PHYs).  Each Ethernet port
47101     has its own statistics monitor that tracks and reports key interface
47102     statistics.  Each port supports a 256-entry hash table for address
47103     filtering.  In addition, each port is bridged to the Switch Fabric
47104     through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
47105
47106     Each Ethernet port also has a pair of internal Ethernet DMA channels to
47107     support the transmit and receive data flows.  The Ethernet DMA channels
47108     use descriptors set up in memory, the memory map of the device, and
47109     access via the Switch Fabric.  The Ethernet Controller?s DMA arbiter
47110     handles arbitration for the Switch Fabric.  The Controller also
47111     has a register businterface for register accesses and status monitor
47112     control.
47113
47114     The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
47115     modes.  The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
47116     The GMII and TBI modes are used to connect with Gigabit PMDs.  Internal
47117     data flows to and from the Ethernet Controller through the Switch Fabric.
47118
47119     Each Ethernet port uses its transmit and receive DMA channels to manage
47120     data flows through buffer descriptors that are predefined by the
47121     system (the descriptors can exist anywhere in the system memory map).
47122     These descriptors are data structures that point to buffers filled
47123     with data ready to transmit over Ethernet, or they point to empty
47124     buffers ready to receive data from Ethernet.
47125
47126     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47127     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47128
47129 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
47130 Author: roy zang <tie-fei.zang@freescale.com>
47131 Date:   Thu Nov 2 19:01:33 2006 +0800
47132
47133     Tundra tsi108 header file.
47134
47135     The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
47136     PowerPC processors that offers numerous system interconnect options for
47137     embedded application designers. The Tsi108 can interconnect 60x or
47138     MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
47139     and Flash. Provided the macro define for tsi108 chip.
47140
47141     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47142     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47143
47144 commit 87c4db09699c6b89176b31004afcb83eb1585d47
47145 Author: roy zang <tie-fei.zang@freescale.com>
47146 Date:   Thu Nov 2 18:59:15 2006 +0800
47147
47148     Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
47149     mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
47150
47151     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47152     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47153
47154 commit 27801b8ab11c61b577e45742a515bb3b23b80241
47155 Author: roy zang <tie-fei.zang@freescale.com>
47156 Date:   Thu Nov 2 18:57:21 2006 +0800
47157
47158     Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
47159     Make ,config.mk and link file for the mpc7448hpc2 board.
47160
47161     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47162     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47163
47164 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
47165 Author: roy zang <tie-fei.zang@freescale.com>
47166 Date:   Thu Nov 2 18:55:04 2006 +0800
47167
47168     Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
47169     The mpc7448hpc2 board support header file.
47170
47171     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47172     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47173
47174 commit 625bb5ddb50b243f931262ca8c46956409471917
47175 Author: roy zang <tie-fei.zang@freescale.com>
47176 Date:   Thu Nov 2 18:52:21 2006 +0800
47177
47178     Add  mpc7448hpc2  (mpc7448 + tsi108)  board associated code support.
47179     The mpc7448hpc2 board support low level assemble language init code.
47180
47181     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47182     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47183
47184 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
47185 Author: roy zang <tie-fei.zang@freescale.com>
47186 Date:   Thu Nov 2 18:49:51 2006 +0800
47187
47188     General code modification for mpc7448hpc2 board support.
47189     1. Add 7447A and 7448 processor support.
47190     2. Add the following flags.
47191
47192     CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
47193     (such as by switch on board), this flag should be set.
47194
47195     CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
47196     relocates to RAM, this flag should be set.
47197
47198     CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
47199     system hang in exception, this flag should be set.
47200
47201     There is a design issue for tsi108/109 pci configure  read. When pci scan
47202     the slots, if there is no pci card, the tsi108/9 will cause a machine
47203     check exception for mpc7448 processor.
47204
47205     Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
47206     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47207
47208 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
47209 Author: roy zang <tie-fei.zang@freescale.com>
47210 Date:   Thu Nov 2 18:34:47 2006 +0800
47211
47212     Add README file for mpc7448hpc2 board.
47213     Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
47214
47215 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
47216 Author: Bartlomiej Sieka <tur@semihalf.com>
47217 Date:   Wed Nov 1 02:04:38 2006 +0100
47218
47219     Finish up support for MarelV38B board
47220      - add watchdog support
47221      - enable GPIO_WKUP_7 pin for input
47222      - code cleanup
47223
47224 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
47225 Author: Bartlomiej Sieka <tur@semihalf.com>
47226 Date:   Wed Nov 1 01:45:46 2006 +0100
47227
47228     - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
47229           * remove warnings when compiling ethaddr.c
47230           * adjust linker script (fixes a crash resulting from incorrect
47231           definition of __u_boot_cmd_start)
47232     - Some MarelV38B code cleanup.
47233
47234 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
47235 Author: Bartlomiej Sieka <tur@semihalf.com>
47236 Date:   Wed Nov 1 01:38:16 2006 +0100
47237
47238     - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
47239       MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
47240       Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
47241       MPC5XXX_WU_GPIO_DATA_O for affected boards.
47242
47243     - Add defintions for some MPC5XXX GPIO pins.
47244
47245 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
47246 Author: Bartlomiej Sieka <tur@semihalf.com>
47247 Date:   Wed Nov 1 01:34:29 2006 +0100
47248
47249     Changed MarelV38B board make target to lowercase. Config file cleanup.
47250
47251 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
47252 Author: Wolfgang Denk <wd@pollux.denx.de>
47253 Date:   Sun Oct 29 01:03:51 2006 +0200
47254
47255     Automatically adjust ARFLAGS so "make -s" is really silent.
47256
47257 commit fae684e89844856383bdf101440889557df3e6b1
47258 Author: Stefan Roese <sr@denx.de>
47259 Date:   Sat Oct 28 16:45:00 2006 +0200
47260
47261     [PATCH] omap925.c: Remove unused functions
47262
47263     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
47264     Signed-off-by: Stefan Roese <sr@denx.de>
47265
47266 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
47267 Author: Stefan Roese <sr@denx.de>
47268 Date:   Sat Oct 28 17:12:58 2006 +0200
47269
47270     [PATCH] Add some missing machtypes for netstar & voiceblue boards
47271
47272     Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
47273     numbers in code.
47274
47275     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
47276     Signed-off-by: Stefan Roese <sr@denx.de>
47277
47278 commit 856f054410cef52d868feb330168b2a4c4091328
47279 Author: Stefan Roese <sr@denx.de>
47280 Date:   Sat Oct 28 15:55:52 2006 +0200
47281
47282     [PATCH] NAND: Partition name support added to NAND subsystem
47283
47284     chpart, nboot and NAND subsystem related commands now accept also partition
47285     name to specify offset.
47286
47287     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
47288     Signed-off-by: Stefan Roese <sr@denx.de>
47289
47290 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
47291 Author: Wolfgang Denk <wd@pollux.denx.de>
47292 Date:   Sat Oct 28 02:29:44 2006 +0200
47293
47294     Update CHANGELOG.
47295
47296 commit 2751a95abd1b96911081c357e96a12fa97b40dee
47297 Author: Wolfgang Denk <wd@pollux.denx.de>
47298 Date:   Sat Oct 28 02:29:14 2006 +0200
47299
47300     Enable commandline editing and hush shell on all TQM boards.
47301
47302 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
47303 Author: Wolfgang Denk <wd@pollux.denx.de>
47304 Date:   Sat Oct 28 02:28:02 2006 +0200
47305
47306     README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
47307
47308 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
47309 Author: Wolfgang Denk <wd@denx.de>
47310 Date:   Sat Oct 28 01:14:32 2006 +0200
47311
47312     Check for illegal character '=' in environment variable names.
47313
47314     Make sure the string passed as variable name does not contain a '='
47315     character. This not only prevents the common error or typing
47316     "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
47317     also closes a backdoor which allowed to delete write-protected
47318     environment variables, for example by using "setenv ethaddr=".
47319
47320 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
47321 Author: Wolfgang Denk <wd@pollux.denx.de>
47322 Date:   Sat Oct 28 00:38:39 2006 +0200
47323
47324     Minor code cleanup.
47325
47326 commit e11887a77d81077416a2d1c5e0354916fee8c034
47327 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
47328 Date:   Thu Oct 26 17:55:31 2006 +0200
47329
47330     Don't pass any debug options directly to the assembler
47331
47332     When passing the -g option to gcc, gcc automatically selects a
47333     suitable --g<format> option to pass on to the assembler.
47334     Thus, there's no point in forcing a specific debug option on the
47335     assembler using the -Wa mechanism.
47336
47337     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47338
47339 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
47340 Author: Jon Loeliger <jdl@freescale.com>
47341 Date:   Fri Oct 27 07:47:22 2006 -0500
47342
47343     MPC86xx: Cleaned up unused and conditionally used local variables.
47344
47345     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47346
47347 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
47348 Author: Wolfgang Denk <wd@pollux.denx.de>
47349 Date:   Fri Oct 27 11:55:21 2006 +0200
47350
47351     Fix "ar" flags in some Makefiles to allow for silent "make -s"
47352
47353 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
47354 Author: Ben Warren <bwarren@qstreams.com>
47355 Date:   Thu Oct 26 14:38:25 2006 -0400
47356
47357     Fix TSEC driver (now for real): avoid crashes if PHY is not attached
47358     to a TSEC (e.g. a switch is connected via RMII) or
47359     if the PHY is defective/incorrectly configured.
47360
47361     Signed-off-by: Ben Warren <bwarren@qstreams.com>
47362
47363 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
47364 Author: Ben Warren <bwarren@qstreams.com>
47365 Date:   Thu Oct 26 14:38:25 2006 -0400
47366
47367     Fix TSEC driver: avoid crashes if PHY is not attached
47368     to a TSEC (e.g. a switch is connected via RMII) or
47369     if the PHY is defective/incorrectly configured.
47370
47371     Signed-off-by: Ben Warren <bwarren@qstreams.com>
47372
47373 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
47374 Author: Wolfgang Denk <wd@pollux.denx.de>
47375 Date:   Thu Oct 26 16:24:31 2006 +0200
47376
47377     Code cleanup.
47378
47379 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
47380 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
47381 Date:   Wed Oct 25 15:48:59 2006 +0200
47382
47383     Finish up support for the ATSTK1000/ATSTK1002 boards
47384
47385     Add atstk1002_config target to Makefile and move the AVR32 section
47386     down below Blackfin so that it doesn't end up in the middle of
47387     MIPS.
47388
47389     Drop the autogenerated linker script thing for now. Will have to
47390     revisit how to handle chips with different flash and RAM layout
47391     later.
47392
47393     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47394
47395 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
47396 Author: Kumar Gala <galak@kernel.crashing.org>
47397 Date:   Tue Oct 24 23:47:37 2006 -0500
47398
47399     Added support for Multi-Image files that contain a device tree
47400
47401     If a Multi-Image file contains a third image we try to use it as a
47402     device tree.  The device tree image is assumed to be uncompressed in the
47403     image file.  We automatically allocate space for the device tree in memory
47404     and provide an 8k pad to allow more than a reasonable amount of growth.
47405
47406     Additionally, a device tree that was contained in flash will now automatically
47407     get copied to system memory as part of boot.  Previously an error was
47408     reported if one tried to boot a device tree that was in flash.
47409
47410     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
47411
47412 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
47413 Author: Wolfgang Denk <wd@denx.de>
47414 Date:   Tue Oct 24 21:35:55 2006 +0200
47415
47416     Switch to automatically generated CHANGELOG file.
47417     (use "make CHANGELOG" to update it from time to time)
47418
47419 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
47420 Author: Stefan Roese <sr@denx.de>
47421 Date:   Tue Oct 24 18:06:48 2006 +0200
47422
47423     Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
47424     Patch by Stefan Roese, 24 Oct 2006
47425
47426 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
47427 Author: Wolfgang Denk <wd@pollux.denx.de>
47428 Date:   Tue Oct 24 17:24:55 2006 +0200
47429
47430     Merge with /home/wd/git/u-boot/master
47431
47432 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
47433 Author: Wolfgang Denk <wd@pollux.denx.de>
47434 Date:   Tue Oct 24 15:32:57 2006 +0200
47435
47436     Code cleanup
47437
47438 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
47439 Author: Wolfgang Denk <wd@pollux.denx.de>
47440 Date:   Tue Oct 24 14:51:36 2006 +0200
47441
47442     Move atstk1000 files into vendor specific directory.
47443     Patch by Haavard Skinnemoen, 12 Sep 2006
47444
47445 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
47446 Author: Wolfgang Denk <wd@pollux.denx.de>
47447 Date:   Tue Oct 24 14:42:37 2006 +0200
47448
47449     Add ATSTK1000 and ATSTK1002 board support
47450     Patch by Haavard Skinnemoen, 06 Sep 2006
47451
47452     This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
47453     daughterboard.
47454
47455     ATSTK1000 is a full-featured development board for AT32AP CPUs. It
47456     has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
47457     and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
47458     CompactFlash cards. For more information, please see this page:
47459
47460     http://www.atmel.com/dyn/products/tools.asp?family_id=682
47461
47462     The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
47463     AT32AP7000 chip.
47464
47465     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47466
47467 commit f93ae788c3640fcde5db383471d45548ff4060d0
47468 Author: Wolfgang Denk <wd@pollux.denx.de>
47469 Date:   Tue Oct 24 14:31:24 2006 +0200
47470
47471     Add common serial driver for Atmel AT32 and AT91 chips
47472     Patch by Haavard Skinnemoen, 06 Sep 2006
47473
47474     This is a first attempt at creating a common serial driver for Atmel
47475     chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
47476     be possible to support AT91RM9200 and other ARM-based chips with some
47477     minor modifications.
47478
47479     There's nothing fundamentally AVR32-specific in this driver, but it
47480     does use some features which are currently only defined for the
47481     AT32AP CPU port:
47482       * pm_get_clock_freq: Obtain the clock frequency of a given domain
47483       * gd->console_uart: A "struct device" containing information about
47484         register mappings, gpio resources and clocks associated with the
47485         UART device.
47486
47487     For more information about these features, please see the "AT32AP
47488     CPU" patch.
47489
47490 commit 72a087e04705c26cad982879ebd06b5281bf825a
47491 Author: Wolfgang Denk <wd@pollux.denx.de>
47492 Date:   Tue Oct 24 14:27:35 2006 +0200
47493
47494     Add AT32AP CPU and AT32AP7000 SoC support
47495     Patch by Haavard Skinnemoen, 06 Sep 2006
47496
47497     This patch adds support for the AT32AP CPU family and the AT32AP7000
47498     chip, which is the first chip implementing the AVR32 architecture.
47499
47500     The AT32AP CPU core is a high-performance implementation featuring a
47501     7-stage pipeline, separate instruction- and data caches, and a MMU.
47502     For more information, please see the "AVR32 AP Technical Reference":
47503
47504     http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
47505
47506     In addition to this, the AT32AP7000 chip comes with a large set of
47507     integrated peripherals, many of which are shared with the AT91 series
47508     of ARM-based microcontrollers from Atmel. Full data sheet is
47509     available here:
47510
47511     http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
47512
47513     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47514
47515 commit 7b64fef33c66be648826c0ff9758298ef13d0604
47516 Author: Wolfgang Denk <wd@pollux.denx.de>
47517 Date:   Tue Oct 24 14:21:16 2006 +0200
47518
47519     Add AVR32 architecture support
47520     Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
47521
47522     This patch adds common infrastructure code for the Atmel AVR32
47523     architecture. See doc/README.AVR32 for details.
47524
47525     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47526
47527 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
47528 Author: Wolfgang Denk <wd@pollux.denx.de>
47529 Date:   Tue Oct 24 13:57:33 2006 +0200
47530
47531     Use -g instead of -gstabs in AFLAGS_DEBUG
47532     Patch by Haavard Skinnemoen, 30 Aug 2006
47533
47534     In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
47535     matter what the target's preferred debugging format is. This patch
47536     simply replaces -gstabs with -g, so that the default debugging format
47537     for the architecture is used.
47538
47539 commit 965829872169c2996023840d98e1d85ad148d629
47540 Author: Wolfgang Denk <wd@pollux.denx.de>
47541 Date:   Tue Oct 24 13:55:18 2006 +0200
47542
47543     Fix/workaround broken dependency handling with make 3.81
47544     Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
47545
47546 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
47547 Author: Marian Balakowicz <m8@semihalf.com>
47548 Date:   Mon Oct 23 22:17:05 2006 +0200
47549
47550     Fix sequoia separate object direcory building problems.
47551
47552 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
47553 Author: Jon Loeliger <jdl@freescale.com>
47554 Date:   Fri Oct 20 17:16:35 2006 -0500
47555
47556     Use generic I2C register block on 85xx and 86xx.
47557
47558     Replace private IMMAP I2C structures with generic reg block
47559     and allow 86xx to have multiple I2C device busses.
47560
47561     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47562
47563 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
47564 Author: Jon Loeliger <jdl@freescale.com>
47565 Date:   Fri Oct 20 15:54:34 2006 -0500
47566
47567     Fix compilation warnings on a few 85xx boards.
47568
47569     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47570
47571 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
47572 Author: Jon Loeliger <jdl@freescale.com>
47573 Date:   Fri Oct 20 15:50:15 2006 -0500
47574
47575     Converted all 85xx boards to use a common FSL I2C driver.
47576     Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
47577     And removed hard i2c path from a few u-boot.lds scipts too.
47578     Minor whitespace cleanups along the way.
47579
47580     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47581
47582 commit 4d45f69e362b05892c9e92a7907e5820995612aa
47583 Author: Jon Loeliger <jdl@freescale.com>
47584 Date:   Thu Oct 19 12:02:24 2006 -0500
47585
47586     Rewrite a series of goto statements as a sequences of
47587     conditional expressions instead.
47588
47589     Use consistent return code 0/-1 for good/bad indicators.
47590
47591     Include one fewer file if the driver isn't used at all.
47592
47593     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47594
47595 commit 7237c033b02fe295880435f1eb80819a0c987532
47596 Author: Jon Loeliger <jdl@freescale.com>
47597 Date:   Thu Oct 19 11:02:16 2006 -0500
47598
47599     Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
47600
47601     in an effort to begin to unify the umpteen FSL I2C drivers that
47602     are all otherwise very similar.
47603
47604     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47605
47606 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
47607 Author: Jon Loeliger <jdl@freescale.com>
47608 Date:   Thu Oct 19 11:33:52 2006 -0500
47609
47610     * Fix a bunch of compiler warnings for gcc 4.0
47611
47612     Signed-off-by: Matthew McClintock <msm@freescale.com>
47613
47614 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
47615 Author: Stefan Roese <sr@denx.de>
47616 Date:   Tue Oct 17 06:14:31 2006 +0200
47617
47618     Add monitor functions for indirect access to PPC440 DCR's
47619     Patch by Leonid Baryudin, 12 Oct 2006
47620
47621 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
47622 Author: Jon Loeliger <jdl@freescale.com>
47623 Date:   Fri Oct 13 16:47:53 2006 -0500
47624
47625     Fixed leading whitespace issues.
47626     Removed spurious LAWAR thing.
47627
47628     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47629
47630 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
47631 Author: Jon Loeliger <jdl@freescale.com>
47632 Date:   Thu Oct 12 10:42:36 2006 -0500
47633
47634     Remove unneeded include files and local variable.
47635
47636     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47637
47638 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
47639 Author: Grant Likely <grant.likely@secretlab.ca>
47640 Date:   Tue Oct 10 00:23:32 2006 -0600
47641
47642     Fix possible uninitialized variable compiler warning.
47643
47644     When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
47645     do_bootm_linux() may be uninitialized.  There is no possibility in the
47646     current code that len will get used uninitialized, but this fix follows
47647     the existing convention of setting both len and data to zero at the same
47648     time.
47649
47650     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47651
47652 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
47653 Author: Matthew McClintock <msm@freescale.com>
47654 Date:   Wed Oct 11 15:13:01 2006 -0500
47655
47656     * Fix a bunch of compiler warnings for gcc 4.0
47657
47658     Signed-off-by: Matthew McClintock <msm@freescale.com>
47659
47660 commit bf651baa365e5447246aad6a633ccd667cf24a39
47661 Author: Jon Loeliger <jdl@freescale.com>
47662 Date:   Wed Oct 11 10:10:43 2006 -0500
47663
47664     Move "ar" flags to config.mk to allow for silent "make -s"
47665
47666 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
47667 Author: Jon Loeliger <jdl@freescale.com>
47668 Date:   Tue Oct 10 17:19:03 2006 -0500
47669
47670     Coding style changes to remove local varible blocks
47671     and reformat a bit nicer.
47672
47673 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
47674 Author: Jon Loeliger <jdl@freescale.com>
47675 Date:   Tue Oct 10 17:16:04 2006 -0500
47676
47677     Fix whitespace issues.
47678
47679 commit 7b382b7125f2397cce63253df62f183e3dfa2770
47680 Author: Jon Loeliger <jdl@freescale.com>
47681 Date:   Tue Oct 10 17:14:45 2006 -0500
47682
47683     Fix whitespace issues.
47684
47685 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
47686 Author: Jon Loeliger <jdl@freescale.com>
47687 Date:   Tue Oct 10 17:06:53 2006 -0500
47688
47689     Fix whitespace issues.
47690
47691 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
47692 Author: Jon Loeliger <jdl@freescale.com>
47693 Date:   Tue Oct 10 17:03:43 2006 -0500
47694
47695     Ran lindent and cleaned up whitespace issues.
47696     Format for 80-columns too.
47697
47698 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
47699 Author: Jon Loeliger <jdl@freescale.com>
47700 Date:   Tue Oct 10 17:02:22 2006 -0500
47701
47702     Fix whitespace and 80-col issues.
47703
47704 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
47705 Author: Stefan Roese <sr@denx.de>
47706 Date:   Sat Oct 7 11:36:51 2006 +0200
47707
47708     CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
47709     Patch by Stefan Roese, 07 Oct 2006
47710
47711 commit 5bc528fa4da751d472397b308137238a6465afd2
47712 Author: Stefan Roese <sr@denx.de>
47713 Date:   Sat Oct 7 11:35:25 2006 +0200
47714
47715     Update ALPR code (NAND support working now)
47716     Patch by Stefan Roese, 07 Oct 2006
47717
47718 commit 77d5034847d328753b80c46b83f960a14a26f40e
47719 Author: Stefan Roese <sr@denx.de>
47720 Date:   Sat Oct 7 11:33:03 2006 +0200
47721
47722     Remove compile warnings in fpga code
47723     Patch by Stefan Roese, 07 Oct 2006
47724
47725 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
47726 Author: Stefan Roese <sr@denx.de>
47727 Date:   Sat Oct 7 11:30:52 2006 +0200
47728
47729     Add CONFIG_BOARD_RESET to configure board specific reset function
47730     Patch by Stefan Roese, 07 Oct 2006
47731
47732 commit f55df18187e7a45cb73fec4370d12135e6691ae1
47733 Author: John Traill <john.traill@freescale.com>
47734 Date:   Fri Sep 29 08:23:12 2006 +0100
47735
47736     Fix missing tCycle/modfreq calculation.
47737
47738     Signed-off-by: John Traill <john.traill@freescale.com>
47739
47740 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
47741 Author: Andy Fleming <afleming@freescale.com>
47742 Date:   Wed Sep 13 10:33:35 2006 -0500
47743
47744     Updated config headers to add default FDT-based booting
47745
47746 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
47747 Author: Andy Fleming <afleming@freescale.com>
47748 Date:   Wed Sep 13 10:34:18 2006 -0500
47749
47750     Add support for eTSEC 3 & 4 on 8548 CDS
47751
47752     * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
47753       This will only work on rev 1.3 boards (but doesn't break older boards)
47754     * Cleaned up some comments to reflect the expanded role of tsec
47755       in other systems
47756
47757 commit 084d648b109c8984f83674043c1a7fa3885ef801
47758 Author: Andy Fleming <afleming@freescale.com>
47759 Date:   Wed Sep 13 10:33:56 2006 -0500
47760
47761     Added code to support 2.6.18 PCI changes in u-boot
47762
47763     * Added code to swizzle the IRQ map for the PCI
47764
47765 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
47766 Author: Jon Loeliger <jdl@freescale.com>
47767 Date:   Tue Sep 19 09:34:10 2006 -0500
47768
47769     Modified makefile for new build mechanism.
47770
47771     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47772
47773 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
47774 Author: Jon Loeliger <jdl@freescale.com>
47775 Date:   Thu Sep 14 08:40:36 2006 -0500
47776
47777     Handle 86xx SVR values according to the new Reference Manual.
47778     Both 8641 and 8641D have SVR == 0x8090, and are distinguished
47779     by the byte in bits 16-23 instead.
47780     Thanks to Jason Jin for noticing.
47781
47782     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47783
47784 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
47785 Author: Zhang Wei <wei.zhang@freescale.com>
47786 Date:   Mon Aug 28 14:25:31 2006 +0800
47787
47788     Fixed an OF-tree off-by-one bug when adding a new property name.
47789     This bug will cause the kernel booting to pause a long time.
47790
47791     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
47792     (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
47793
47794 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
47795 Author: Jon Loeliger <jdl@freescale.com>
47796 Date:   Tue Aug 29 11:05:09 2006 -0500
47797
47798     Remove trailing empty lines.
47799
47800 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
47801 Author: Jon Loeliger <jdl@freescale.com>
47802 Date:   Tue Aug 29 09:48:49 2006 -0500
47803
47804     Remove bogus msync and use volatile asm.
47805
47806 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
47807 Author: Jon Loeliger <jdl@freescale.com>
47808 Date:   Tue Aug 29 08:17:14 2006 -0500
47809
47810     Add myself as maintainer for MPC8641HPCN.
47811
47812 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
47813 Author: Zhang Wei <wei.zhang@freescale.com>
47814 Date:   Mon Aug 28 14:25:31 2006 +0800
47815
47816     Fixed an OF-tree off-by-one bug when adding a new property name.
47817     This bug will cause the kernel booting to pause a long time.
47818
47819     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
47820
47821 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
47822 Author: Haiying Wang <haiying.wang@freescale.com>
47823 Date:   Fri Aug 25 14:38:34 2006 -0400
47824
47825     Change ramdiskaddr and dtbaddr
47826     Remove PEX fluff commands.
47827
47828     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
47829     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47830
47831 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
47832 Author: Matthew McClintock <msm@freescale.com>
47833 Date:   Wed Aug 23 13:32:45 2006 -0500
47834
47835     * Another small fix for booting with disable_of
47836
47837     Signed-off-by: Matthew McClintock <msm@freescale.com>
47838
47839 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
47840 Author: Jon Loeliger <jdl@freescale.com>
47841 Date:   Wed Aug 23 11:04:43 2006 -0500
47842
47843     Cleanup and lindent new AHCI driver.
47844
47845 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
47846 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
47847 Date:   Wed Aug 23 19:15:12 2006 +0800
47848
47849     Add AHCI define and sata support for MPC8641HPCN board.
47850
47851     Signed-off-by:Jason Jin<jason.jin@freescale.com>
47852
47853 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
47854 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
47855 Date:   Wed Aug 23 19:10:44 2006 +0800
47856
47857     Add AHCI support to u-boot
47858
47859     Add AHCI support in u-boot, enable the sata disk controllers which
47860     following the AHCI protocol.
47861
47862     Signed-off-by:Jason Jin<jason.jin@freescale.com>
47863
47864 commit d8ea2acf5f137cae99417df4f573d036ee384668
47865 Author: Zhang Wei <wei.zhang@freescale.com>
47866 Date:   Wed Aug 23 17:54:32 2006 +0800
47867
47868     Add dtb boot-up parameter to default boot commands.
47869
47870     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
47871
47872 commit b93775c2036b99baa390ea425c4771895bbc63c4
47873 Author: Jon Loeliger <jdl@freescale.com>
47874 Date:   Tue Aug 22 18:26:08 2006 -0500
47875
47876     Cleanup even more poorly introduced whitespace.
47877
47878 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
47879 Author: Jon Loeliger <jdl@freescale.com>
47880 Date:   Tue Aug 22 18:07:00 2006 -0500
47881
47882     Cleanup more poorly introduced whitespace.
47883
47884 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
47885 Author: Jon Loeliger <jdl@freescale.com>
47886 Date:   Tue Aug 22 17:54:05 2006 -0500
47887
47888     Cleanup poorly introduced whitespace.
47889
47890 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
47891 Author: Jon Loeliger <jdl@freescale.com>
47892 Date:   Tue Aug 22 12:25:27 2006 -0500
47893
47894     General indent and whitespace cleanups.
47895
47896 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
47897 Author: Jon Loeliger <jdl@freescale.com>
47898 Date:   Tue Aug 22 12:06:18 2006 -0500
47899
47900     General indent and whitespace cleanups.
47901
47902 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
47903 Author: Jon Loeliger <jdl@freescale.com>
47904 Date:   Tue Aug 22 10:42:21 2006 -0500
47905
47906     Cleanup compiler warnings.
47907
47908 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
47909 Author: Matthew McClintock <msm@freescale.com>
47910 Date:   Tue Aug 22 09:31:59 2006 -0500
47911
47912     Fix disable_of booting
47913
47914     Signed-off-by: Matthew McClintock <msm@freescale.com>
47915
47916 commit 87a449c8ac396420cb24260f717ea9e6faa82047
47917 Author: Matthew McClintock <msm@freescale.com>
47918 Date:   Tue Aug 22 09:23:55 2006 -0500
47919
47920     Support for FDT in uImage format, error when using FDT from flash
47921
47922     Signed-off-by: Matthew McClintock <msm@freescale.com>
47923
47924 commit 75c299c38369d01addd5e054b8a16217b70f4a86
47925 Author: Haiying Wang <haiying.wang@freescale.com>
47926 Date:   Tue Aug 15 15:12:55 2006 -0400
47927
47928     Unlock cache before kernel starts up for MPC86xx
47929
47930 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
47931 Author: Haiying Wang <haiying.wang@freescale.com>
47932 Date:   Tue Aug 15 15:13:15 2006 -0400
47933
47934     Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
47935
47936 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
47937 Author: Haiying Wang <haiying.wang@freescale.com>
47938 Date:   Tue Aug 15 15:12:55 2006 -0400
47939
47940     Unlock cache before kernel starts up for MPC86xx
47941
47942 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
47943 Author: Haiying Wang <haiying.wang@freescale.com>
47944 Date:   Tue Aug 15 15:13:15 2006 -0400
47945
47946     Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
47947
47948 commit 86c8e17f25e972a7e272950a0735fad84e082b88
47949 Author: Matthew McClintock <msm@freescale.com>
47950 Date:   Wed Aug 16 13:59:47 2006 -0500
47951
47952     * Fix disable_of booting
47953
47954     Signed-off-by: Matthew McClintock <msm@freescale.com>
47955
47956 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
47957 Author: Matthew McClintock <msm@freescale.com>
47958 Date:   Wed Aug 16 10:54:09 2006 -0500
47959
47960     * Support for FDT in uImage format, error when using FDT from flash
47961
47962     Signed-off-by: Matthew McClintock <msm@freescale.com>
47963
47964 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
47965 Author: Stefan Roese <sr@denx.de>
47966 Date:   Tue Aug 15 14:22:35 2006 +0200
47967
47968     Add initial support for the ALPR board from Prodrive
47969     NAND needs some additional testing
47970     Patch by Heiko Schocher, 15 Aug 2006
47971
47972 commit f0ff4692ff3372dec55074a8eb444943ab095abb
47973 Author: Stefan Roese <sr@denx.de>
47974 Date:   Tue Aug 15 14:15:51 2006 +0200
47975
47976     Add FPGA Altera Cyclone 2 support
47977     Patch by Heiko Schocher, 15 Aug 2006
47978
47979 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
47980 Author: Jon Loeliger <jdl@freescale.com>
47981 Date:   Mon Aug 14 15:33:38 2006 -0500
47982
47983     Fix BAT0 to actually be cacheable, non-guarded as documented.
47984
47985     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47986
47987 commit 40bc83559db5745681909fd7382ae509567e116d
47988 Author: Jon Loeliger <jdl@freescale.com>
47989 Date:   Wed Aug 9 15:32:16 2006 -0500
47990
47991     Removed MPC8641HPCN DTS source file from build.
47992     It is no longer linked into U-Boot; its sources are
47993     now located in the kernel tree.
47994
47995     Signed-off-by: Jon Loeliger <jdl@freescale.com>
47996
47997 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
47998 Author: Matthew McClintock <msm@freescale.com>
47999 Date:   Wed Jun 28 10:47:03 2006 -0500
48000
48001     * Switched default PCI speed for 8540 ADS back to 33MHz
48002
48003     * Added comments and a printf to warn that PCI-X won't
48004       work at 33MHz
48005       Patch by Andy Fleming 17-Mar-2006
48006
48007     Signed-off-by: Andy Fleming <afleming@freescale.com>
48008
48009 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
48010 Author: Matthew McClintock <msm@freescale.com>
48011 Date:   Wed Jun 28 10:46:35 2006 -0500
48012
48013     * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
48014
48015     Signed-off-by: Andy Fleming <afleming@freescale.com>
48016
48017 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
48018 Author: Matthew McClintock <msm@freescale.com>
48019 Date:   Wed Jun 28 10:46:13 2006 -0500
48020
48021     * Added VIA configuration table
48022
48023     * Added support for PCI2 on CDS
48024       Patch by Andy Fleming 17-Mar-2006
48025
48026     Signed-off-by: Andy Fleming <afleming@freescale.com>
48027
48028 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
48029 Author: Matthew McClintock <msm@freescale.com>
48030 Date:   Wed Jun 28 10:45:41 2006 -0500
48031
48032     * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
48033
48034     Signed-off-by: Andy Fleming <afleming@freescale.com>
48035
48036 commit 97074ed9655309b64231bc2cee69fe85399f8055
48037 Author: Matthew McClintock <msm@freescale.com>
48038 Date:   Wed Jun 28 10:45:17 2006 -0500
48039
48040     * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
48041
48042     Signed-off-by: Andy Fleming <afleming@freescale.com>
48043
48044 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
48045 Author: Matthew McClintock <msm@freescale.com>
48046 Date:   Wed Jun 28 10:44:49 2006 -0500
48047
48048     * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
48049
48050     Signed-off-by: Andy Fleming <afleming@freescale.com>
48051
48052 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
48053 Author: Matthew McClintock <msm@freescale.com>
48054 Date:   Wed Jun 28 10:44:23 2006 -0500
48055
48056     * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
48057
48058     Signed-off-by: Andy Fleming <afleming@freescale.com>
48059
48060 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
48061 Author: Matthew McClintock <msm@freescale.com>
48062 Date:   Wed Jun 28 10:43:36 2006 -0500
48063
48064     * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
48065
48066     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48067
48068 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
48069 Author: Matthew McClintock <msm@freescale.com>
48070 Date:   Wed Jun 28 10:43:00 2006 -0500
48071
48072     * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
48073
48074 commit 5498d90312aad9f6bdbf047986027c35b03cd163
48075 Author: Matthew McClintock <msm@freescale.com>
48076 Date:   Wed Jun 28 10:42:24 2006 -0500
48077
48078     * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
48079
48080 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
48081 Author: Matthew McClintock <msm@freescale.com>
48082 Date:   Wed Jun 28 10:41:37 2006 -0500
48083
48084     * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
48085
48086 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
48087 Author: John Traill <john.traill@freescale.com>
48088 Date:   Wed Aug 9 14:33:50 2006 +0100
48089
48090     Add Rapidio support for the MPC8641HPCN
48091
48092     Signed-off-by: John Traill <john.traill@freescale.com>
48093
48094 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
48095 Author: John Traill <john.traill@freescale.com>
48096 Date:   Tue Aug 8 11:32:43 2006 +0100
48097
48098     Fix caslat calculation
48099
48100     Signed-off-by: John Traill <john.traill@freescale.com>
48101
48102 commit 709d3073e74153278e7904a70819bbef7df50e1a
48103 Author: Jon Loeliger <jdl@freescale.com>
48104 Date:   Thu Aug 3 16:17:56 2006 -0500
48105
48106     Convert to mac-address in ethernet nodes.
48107
48108 commit 71748af833ca1017edf1415be376366ff2937d17
48109 Author: Haiying Wang <haiying.wang@freescale.com>
48110 Date:   Fri Jul 28 12:41:35 2006 -0400
48111
48112     Correct the irq value of DUART2
48113
48114 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
48115 Author: Haiying Wang <haiying.wang@freescale.com>
48116 Date:   Fri Jul 28 12:41:41 2006 -0400
48117
48118     Change the space size of PEX IO in README
48119
48120 commit 239db37c94f7a92941c4465feceb867c609241c5
48121 Author: Haiying Wang <haiying.wang@freescale.com>
48122 Date:   Fri Jul 28 12:41:18 2006 -0400
48123
48124     Move get_board_sys_clk to board directory
48125
48126 commit 492900b985439fbce1a118afde1e35def870db03
48127 Author: John Traill <john.traill@freescale.com>
48128 Date:   Fri Jul 28 09:03:54 2006 +0100
48129
48130     Fix 8641HPCN pollution
48131
48132 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
48133 Author: John Traill <john.traill@freescale.com>
48134 Date:   Fri Jul 28 08:16:06 2006 +0100
48135
48136     Fix 8641HPCN timebase
48137
48138 commit c86360b830f1eecd7a72208575dde4f57879faea
48139 Author: Zhang Wei <wei.zhang@freescale.com>
48140 Date:   Fri Jul 28 00:01:34 2006 +0800
48141
48142     Fixed OF device tree of mpc86xxhpcn board.
48143
48144     The changes works in with kernel irq mapping rework.
48145
48146     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
48147
48148 commit bea3f28d285942bf3f7ab339ce85178ded544225
48149 Author: Haiying Wang <haiying.wang@freescale.com>
48150 Date:   Wed Jul 12 10:48:05 2006 -0400
48151
48152     Add support for reading and writing mac addresses to or from ID EEPROM.
48153
48154     Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
48155     With attached patch, we can use command "mac/mac read/mac save/"
48156     to read and write EEPROM under u-boot prompt.
48157
48158     U-boot will calculate the checksum of EEPROM while bootup,
48159     if it is right, then u-boot will check whether the mac address
48160     of eTSEC0/1/2/3 is availalbe (non-zero).
48161
48162     If there is mac address availabe in EEPROM, u-boot will use it,
48163     otherewise, u-boot will use the mac address defined in
48164     MPC8641HPCN.h. This matches the requirement to set unique mac address
48165     for each TSEC port.
48166
48167     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
48168     Signed-off-by: York Sun <yorksun@freescale.com>
48169
48170 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
48171 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
48172 Date:   Thu Jul 13 10:35:10 2006 -0500
48173
48174     Fixed initrd issue by define big RAM
48175
48176     Signed-off-by:Jason Jin <Jason.jin@freescale.com>
48177
48178 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
48179 Author: Jason Jin <Jason.jin@freescale.com>
48180 Date:   Fri Jul 7 10:01:45 2006 -0500
48181
48182     We made a u-boot patch to fix the hang up issue
48183     when booting filesystem from ramdisk.
48184
48185     Signed-off-by:Jason Jin <Jason.jin@freescale.com>
48186
48187 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
48188 Author: Matthew McClintock <msm@freescale.com>
48189 Date:   Wed Jun 28 10:47:03 2006 -0500
48190
48191     * Switched default PCI speed for 8540 ADS back to 33MHz
48192     * Added comments and a printf to warn that PCI-X won't
48193       work at 33MHz
48194       Patch by Andy Fleming 17-Mar-2006
48195
48196     Signed-off-by: Andy Fleming <afleming@freescale.com>
48197
48198 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
48199 Author: Matthew McClintock <msm@freescale.com>
48200 Date:   Wed Jun 28 10:46:35 2006 -0500
48201
48202     * Fixed a bug where 8555 PCI code used the old variable and
48203       function names
48204       Patch by Andy Fleming 17-Mar-2006
48205
48206     Signed-off-by: Andy Fleming <afleming@freescale.com>
48207
48208 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
48209 Author: Matthew McClintock <msm@freescale.com>
48210 Date:   Wed Jun 28 10:46:13 2006 -0500
48211
48212     * Added VIA configuration table
48213     * Added support for PCI2 on CDS
48214       Patch by Andy Fleming 17-Mar-2006
48215
48216     Signed-off-by: Andy Fleming <afleming@freescale.com>
48217
48218 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
48219 Author: Matthew McClintock <msm@freescale.com>
48220 Date:   Wed Jun 28 10:45:41 2006 -0500
48221
48222     * Fixed PCI memory definitions
48223       Patch by Andy Fleming 17-Mar-2006
48224
48225     Signed-off-by: Andy Fleming <afleming@freescale.com>
48226
48227 commit 087454609e47295443af793a282cddcd91a5f49c
48228 Author: Matthew McClintock <msm@freescale.com>
48229 Date:   Wed Jun 28 10:45:17 2006 -0500
48230
48231     * Added support for initializing second PCI bus on 85xx
48232       Patch by Andy Fleming 17-Mar-2006
48233
48234     Signed-off-by: Andy Fleming <afleming@freescale.com>
48235
48236 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
48237 Author: Matthew McClintock <msm@freescale.com>
48238 Date:   Wed Jun 28 10:44:49 2006 -0500
48239
48240     * Added PCI-X #defines for PCI-X initialization
48241       Patch by Andy Fleming on 17-Mar-2006
48242
48243     Signed-off-by: Andy Fleming <afleming@freescale.com>
48244
48245 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
48246 Author: Matthew McClintock <msm@freescale.com>
48247 Date:   Wed Jun 28 10:44:23 2006 -0500
48248
48249     * Made sure the code which disables prefetch for PCI devices
48250       sets the size of the prefetch region to 0
48251       Patch by Andy Fleming on 17-Mar-2006
48252
48253     Signed-off-by: Andy Fleming <afleming@freescale.com>
48254
48255 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
48256 Author: Matthew McClintock <msm@freescale.com>
48257 Date:   Wed Jun 28 10:43:36 2006 -0500
48258
48259     * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
48260       Patch by Jon Loeliger 17-Jan-2006
48261
48262     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48263
48264 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
48265 Author: Matthew McClintock <msm@freescale.com>
48266 Date:   Wed Jun 28 10:43:00 2006 -0500
48267
48268     * Removed the oftree.dts for stxxtx in light of the changes
48269       to the flat device tree handling code
48270       Patch by Matthew McClintock 26-June-2006
48271
48272 commit 1b380ec225665e73959677f3893dc658c5925e05
48273 Author: Matthew McClintock <msm@freescale.com>
48274 Date:   Wed Jun 28 10:42:24 2006 -0500
48275
48276     * Patch to modify ft_build.c to update flat device trees in place
48277       Patch by Matthew McClintock 26-June-2006
48278
48279 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
48280 Author: Matthew McClintock <msm@freescale.com>
48281 Date:   Wed Jun 28 10:41:37 2006 -0500
48282
48283     * Modify bootm command to support booting with flat device trees
48284       Patch by Matthew McClintock 26-June-2006
48285
48286 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
48287 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
48288 Date:   Wed Jun 28 08:43:56 2006 -0500
48289
48290     Change Id to symbolic name for RTL8139
48291
48292     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
48293
48294 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
48295 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
48296 Date:   Tue Jun 27 18:12:10 2006 +0800
48297
48298     Fix RTL8139 in big endian
48299
48300     signed-off-by: Jason Jin <Jason.Jin@freescale.com>
48301     signed-off-by: Wei Zhang <wei.zhang@freescale.com>
48302
48303 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
48304 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
48305 Date:   Tue Jun 27 18:12:23 2006 +0800
48306
48307     Fix Tsec bug when no link
48308
48309      When tftp a non-exist file from the tftp server, u-boot will check
48310      the link of all eth port. The original file will return wrong link
48311      state on the no link ports.
48312
48313     signed-off-by: Jason Jin <Jason.Jin@freescale.com>
48314
48315 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
48316 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
48317 Date:   Tue Jun 27 18:12:02 2006 +0800
48318
48319     Fix bug for io_bar size during pci scan
48320
48321     During the pci scan process, Some devices return bar_reponse with the
48322     highest bytes 0, such as the pci bridge in uli1575 return bar_response
48323     with 0xffffff, So the bar_size should be manually set under 64K.
48324
48325     Signed-off-by: Jason Jin <jason.jin@freescale.com>
48326
48327 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
48328 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
48329 Date:   Tue Jun 27 18:11:54 2006 +0800
48330
48331     Enable PCIE1 for MPC8641HPCN board
48332
48333     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
48334
48335 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
48336 Author: Wolfgang Denk <wd@pollux.denx.de>
48337 Date:   Mon Jun 26 11:06:00 2006 +0200
48338
48339     More code cleanup
48340
48341 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
48342 Author: Jon Loeliger <jdl@freescale.com>
48343 Date:   Thu Jun 22 08:51:46 2006 -0500
48344
48345     Fix bug in 8641hpcn reset command with no args.
48346
48347     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
48348     Acked-by: Jon Loeliger <jdl@freescale.com>
48349
48350 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
48351 Author: Zhang Wei <wei.zhang@freescale.com>
48352 Date:   Tue Jun 20 17:47:15 2006 +0800
48353
48354     Reworked IRQ mapping in OF-tree.
48355
48356 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
48357 Author: Jon Loeliger <jdl@freescale.com>
48358 Date:   Thu Jun 15 21:33:37 2006 -0500
48359
48360     Do not enable address translation on secondary CPUs.
48361     Do not set up BATs on secondary CPUs.  Let Linux do the nasty.
48362
48363     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48364
48365 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
48366 Author: Wolfgang Denk <wd@pollux.denx.de>
48367 Date:   Wed Jun 14 18:14:56 2006 +0200
48368
48369     Code cleanup
48370
48371 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
48372 Author: Wolfgang Denk <wd@pollux.denx.de>
48373 Date:   Wed Jun 14 17:45:53 2006 +0200
48374
48375     Various USB related patches
48376     - Add support for mpc8xx USB device.
48377     - Add support for Common Device Class - Abstract Control Model USB console.
48378     - Add support for flow control in USB slave devices.
48379     - Add support for switching between gserial and cdc_acm using environment.
48380     - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
48381     - Update usbcore slightly to ease host enumeration.
48382     - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
48383     - Add AdderUSB_config as a defconfig to enable usage of the USB console
48384       by default with the Adder87x U-Boot port.
48385     Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
48386
48387 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
48388 Author: Jon Loeliger <jdl@jdl.com>
48389 Date:   Wed Jun 7 10:53:55 2006 -0500
48390
48391     Fix a get_board_sys_clk() use-before-def warning.
48392
48393     Signed-off-by: Jon Loeliger <jdl@jdl.com>
48394
48395 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
48396 Author: Jon Loeliger <jdl@jdl.com>
48397 Date:   Wed Jun 7 10:52:49 2006 -0500
48398
48399     Allow DTC path to be passed in.
48400
48401     Signed-off-by: Jon Loeliger <jdl@jdl.com>
48402
48403 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
48404 Author: Haiying Wang <haiying.wang@freescale.com>
48405 Date:   Tue Jun 6 16:54:29 2006 -0400
48406
48407     Modify the IRQ of DUART2
48408
48409 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
48410 Author: Jon Loeliger <jdl@jdl.com>
48411 Date:   Wed May 31 13:55:35 2006 -0500
48412
48413     Review cleanups.
48414
48415     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48416
48417 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
48418 Author: Jon Loeliger <jdl@jdl.com>
48419 Date:   Wed May 31 12:44:44 2006 -0500
48420
48421     White space cleanup.
48422     Some 80-column cleanups.
48423     Convert printf() to puts() where possible.
48424     Use #include "spd_sdram.h" as needed.
48425     Enhanced reset command usage message a bit.
48426
48427     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48428
48429 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
48430 Author: Jon Loeliger <jdl@jdl.com>
48431 Date:   Wed May 31 11:39:34 2006 -0500
48432
48433     Removed unneeded local_bus_init() from 8641HPCN board.
48434
48435     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48436
48437 commit 4d3d729c16c392d2982d3266b659d333c927697d
48438 Author: Jon Loeliger <jdl@jdl.com>
48439 Date:   Wed May 31 11:24:28 2006 -0500
48440
48441     Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
48442
48443     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48444
48445 commit b2a941de060350ad15878d8219825f4950e9bb8e
48446 Author: Jon Loeliger <jdl@jdl.com>
48447 Date:   Wed May 31 10:07:28 2006 -0500
48448
48449     Remove dead debug code.
48450
48451     Signed-off-by: Jon Loeliger <jdl@jdl.com>
48452
48453 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
48454 Author: Jon Loeliger <jdl@freescale.com>
48455 Date:   Tue May 30 17:47:00 2006 -0500
48456
48457     Move mpc86xx PIXIS code to board directory
48458
48459     First cut at moving the PIXIS platform code out of
48460     the 86xx cpu directory and into board/mpc8641hpcn
48461     where it belongs.
48462
48463     Signed-off-by: Jon Loeliger <jdl@freescale.com>
48464
48465 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
48466 Author: Markus Klotzbuecher <mk@denx.de>
48467 Date:   Tue May 30 16:56:14 2006 +0200
48468
48469     Support generic OHCI support for the s3c24x0 cpu.
48470
48471 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
48472 Author: Haiying Wang <Haiying.Wang@freescale.com>
48473 Date:   Tue May 30 09:10:32 2006 -0500
48474
48475     Improve "reset" command's interaction with watchdog.
48476
48477         "reset altbank" will reset another bank WITHOUT watch dog timer enabled
48478         "reset altbank wd" will reset another bank WITH watch dog enabled
48479         "diswd" will disable watch dog after u-boot boots up successfully
48480
48481     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
48482
48483 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
48484 Author: Haiying Wang <Haiying.Wang@freescale.com>
48485 Date:   Tue May 30 08:51:19 2006 -0500
48486
48487     Fix two SDRAM setup bugs.
48488
48489         Fix ECC setup bug.
48490         Enable 1T/2T based on number of DIMMs present.
48491
48492     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
48493
48494 commit d11fec5015334deb2010e36ce00bb118cc5429a5
48495 Author: Haiying Wang <Haiying.Wang@freescale.com>
48496 Date:   Fri May 26 10:24:48 2006 -0500
48497
48498     Add first draft of the MPC8641HPCN doc/README.
48499
48500     Signed-off-by: Jon Loeliger <jdl@jdl.com>
48501
48502 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
48503 Author: Haiying Wang <Haiying.Wang@freescale.com>
48504 Date:   Fri May 26 10:13:04 2006 -0500
48505
48506     Added pci@8000 block.
48507     Updated ethernet interrupt mappings (moved up 48).
48508     Cleaned up a few comments.
48509
48510     Signed-off-by: Jon Loeliger <jdl@jdl.com>
48511
48512 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
48513 Author: Haiying Wang <Haiying.Wang@freescale.com>
48514 Date:   Fri May 26 10:01:16 2006 -0500
48515
48516     Allow args on reset command.
48517
48518     Signed-off-by: Jon Loeliger <jdl@jdl.com>
48519
48520 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
48521 Author: Markus Klotzbuecher <mk@denx.de>
48522 Date:   Tue May 23 13:38:35 2006 +0200
48523
48524     Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
48525     fixes to the latter.
48526
48527 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
48528 Author: Markus Klotzbuecher <mk@denx.de>
48529 Date:   Tue May 23 10:33:11 2006 +0200
48530
48531     More cleanup for the delta board and the generic usb_ohci driver. Added
48532     CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
48533     initialization and cleanup hooks respectively.
48534
48535 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
48536 Author: Markus Klotzbuecher <mk@denx.de>
48537 Date:   Mon May 22 16:33:54 2006 +0200
48538
48539     This patch adds USB storage support for the delta board. This is the first
48540     board to make use of a generic OHCI driver, that calls hooks for board
48541     dependant initialization.
48542
48543 commit 14e37081ff3cac7ebe6e93836523429853b6b292
48544 Author: Jon Loeliger <jdl@jdl.com>
48545 Date:   Fri May 19 13:28:39 2006 -0500
48546
48547     Change arbitration to round-robin for SMP linux.
48548
48549 commit 9a655876e5995be80f49054e2509500e871e4d3a
48550 Author: Jon Loeliger <jdl@jdl.com>
48551 Date:   Fri May 19 13:26:34 2006 -0500
48552
48553     Enable dual DDR controllers and interleaving.
48554
48555 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
48556 Author: Jon Loeliger <jdl@jdl.com>
48557 Date:   Fri May 19 13:22:44 2006 -0500
48558
48559     Update 86xx address map and LAWBARs.
48560
48561 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
48562 Author: Jon Loeliger <jdl@jdl.com>
48563 Date:   Fri May 19 13:14:15 2006 -0500
48564
48565     Remove L2 Cache invalidate polling.
48566
48567 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
48568 Author: Jon Loeliger <jdl@jdl.com>
48569 Date:   Fri May 19 12:33:09 2006 -0500
48570
48571     Enable 2nd CPU and I2C.
48572
48573 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
48574 Author: Jon Loeliger <jdl@freescale.com>
48575 Date:   Mon May 15 07:26:56 2006 -0500
48576
48577     Update interrupt mapping.
48578
48579 commit 6cfea33477b04b63ed47386ed1629529484c33ba
48580 Author: Haiying Wang <Haiying.Wang@freescale.com>
48581 Date:   Wed May 10 09:38:06 2006 -0500
48582
48583     Remove unneeded INIT_RAM_LOCK cache twiddling.
48584     Correctly tracks r29 as global data pointer now.
48585
48586     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
48587
48588 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
48589 Author: Jon Loeliger <jdl@freescale.com>
48590 Date:   Wed May 10 09:33:07 2006 -0500
48591
48592     Remove unnecessary flash.c file.
48593
48594 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
48595 Author: Jon Loeliger <jdl@freescale.com>
48596 Date:   Tue May 9 08:23:49 2006 -0500
48597
48598     Get MPC8641HPCN flash images working.
48599
48600         Enable the CFI driver.
48601         Remove bogus LAWBAR7 cruft.
48602         Use correct TEXT_BASE, Fixup load script.
48603         Enable SPD EEPROM during DDR setup.
48604         Use generic RFC 1918 IP addresses by default.
48605
48606 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
48607 Author: Jon Loeliger <jdl@freescale.com>
48608 Date:   Thu Apr 27 10:15:16 2006 -0500
48609
48610     Cleanup whitespaces and style issues.
48611     Removed //-style comments.
48612     Use 80-column lines.
48613     Remove trailing whitespace.
48614     Remove dead code and debug cruft.
48615
48616 commit a2320a6bf8113a09544c42d160d10ac69d049a03
48617 Author: Jon Loeliger <jdl@freescale.com>
48618 Date:   Thu Apr 27 08:22:39 2006 -0500
48619
48620     Revert bad PCI prefetch limit change.
48621
48622 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
48623 Author: Jon Loeliger <jdl@freescale.com>
48624 Date:   Wed Apr 26 17:58:56 2006 -0500
48625
48626     Initial support for MPC8641 HPCN board.