CHANGELOG

   1 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
   2 Author: Stefan Roese <sr@denx.de>
   3 Date:   Thu Mar 8 10:13:16 2007 +0100
   4
   5     [PATCH] Update AMCC Luan 440SP eval board support
   6
   7     The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
   8     inititializition. This includes DDR auto calibration and support
   9     for different DIMM modules, instead of the fixed setup used in
  10     the earlier version.
  11
  12     This patch also enables the cache in FLASH for the startup
  13     phase of U-Boot (while running from FLASH). After relocating to
  14     SDRAM the cache is disabled again. This will speed up the boot
  15     process, especially the SDRAM setup, since there are some loops
  16     for memory testing (auto calibration).
  17
  18     Signed-off-by: Stefan Roese <sr@denx.de>
  19
  20 commit 2f5df47351910a2936c7741cf111855829200943
  21 Author: Stefan Roese <sr@denx.de>
  22 Date:   Thu Mar 8 10:10:18 2007 +0100
  23
  24     [PATCH] Update AMCC Yucca 440SPe eval board support
  25
  26     The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
  27     inititializition. This includes DDR auto calibration and support
  28     for different DIMM modules, instead of the fixed setup used in
  29     the earlier version.
  30
  31     Signed-off-by: Stefan Roese <sr@denx.de>
  32
  33 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
  34 Author: Stefan Roese <sr@denx.de>
  35 Date:   Thu Mar 8 10:07:18 2007 +0100
  36
  37     ppc4xx: Small AMCC Katmai 440SPe update
  38
  39     Signed-off-by: Stefan Roese <sr@denx.de>
  40
  41 commit df294497479b1dca6dd86318b2a912f72fede0df
  42 Author: Stefan Roese <sr@denx.de>
  43 Date:   Thu Mar 8 10:06:09 2007 +0100
  44
  45     ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
  46
  47     Signed-off-by: Stefan Roese <sr@denx.de>
  48
  49 commit fa1aef15bcd47736687be1af544506e90fba545d
  50 Author: Stefan Roese <sr@denx.de>
  51 Date:   Wed Mar 7 16:43:00 2007 +0100
  52
  53     [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
  54
  55     Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
  56     DDR memory are dynamically programmed matching the total size
  57     of the equipped memory (DIMM modules).
  58
  59     Signed-off-by: Stefan Roese <sr@denx.de>
  60
  61 commit e2ebe696818939e2b974628be9c921ea3fe9de13
  62 Author: Stefan Roese <sr@denx.de>
  63 Date:   Wed Mar 7 16:39:36 2007 +0100
  64
  65     [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
  66
  67     This patch fixes a problem that occurs when 2 DIMM's are
  68     used. This problem was first spotted and fixed by Gerald Jackson
  69     <gerald.jackson@reaonixsecurity.com> but this patch fixes the
  70     problem in a little more clever way.
  71
  72     This patch also adds the nice functionality to dynamically
  73     create the TLB entries for the SDRAM (tlb.c). So we should
  74     never run into such problems with wrong (too short) TLB
  75     initialization again on these platforms.
  76
  77     As this feature is new to the "old" 44x SPD DDR driver, it
  78     has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
  79
  80     Signed-off-by: Stefan Roese <sr@denx.de>
  81
  82 commit 39218433983417b9df087976a79e3f80dd5e83d6
  83 Author: Wolfgang Denk <wd@denx.de>
  84 Date:   Wed Mar 7 16:33:44 2007 +0100
  85
  86     UC101: fix compiler warnings
  87
  88 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
  89 Author: Wolfgang Denk <wd@pollux.denx.de>
  90 Date:   Wed Mar 7 16:19:46 2007 +0100
  91
  92     HMI1001: fix build error, cleanup compiler warnings.
  93
  94 commit ad5bb451ade552c44bef9119d907929ebc2c126f
  95 Author: Wolfgang Denk <wd@pollux.denx.de>
  96 Date:   Tue Mar 6 18:08:43 2007 +0100
  97
  98     Restructure POST directory to support of other CPUs, boards, etc.
  99
 100 commit a5284efd125967675b2e9c6ef7b95832268ad360
 101 Author: Wolfgang Denk <wd@pollux.denx.de>
 102 Date:   Tue Mar 6 18:01:47 2007 +0100
 103
 104     Fix HOSTARCH handling.
 105     Patch by Mike Frysinger, Mar 05 2007
 106
 107 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
 108 Author: Stefan Roese <sr@denx.de>
 109 Date:   Tue Mar 6 07:47:04 2007 +0100
 110
 111     [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
 112
 113     As provided by the AMCC applications team, this patch optimizes the
 114     DDR2 setup for 166MHz bus speed. The values provided are also save
 115     to use on a "normal" 133MHz PLB bus system. Only the refresh counter
 116     setup has to be adjusted as done in this patch.
 117
 118     For this the NAND booting version had to include the "speed.c" file
 119     from the cpu/ppc4xx directory. With this addition the NAND SPL image
 120     will just fit into the 4kbytes of program space. gcc version 4.x as
 121     provided with ELDK 4.x is needed to generate this optimized code.
 122
 123     Signed-off-by: Stefan Roese <sr@denx.de>
 124
 125 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
 126 Author: Stefan Roese <sr@denx.de>
 127 Date:   Thu Mar 1 21:11:36 2007 +0100
 128
 129     [PATCH] Update AMCC Katmai 440SPe eval board support
 130
 131     This patch updates the recently added Katmai board support. The biggest
 132     change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
 133     driver.
 134
 135     Please note, that still some problems are left with some memory
 136     configurations. See the driver for more details.
 137
 138     Signed-off-by: Stefan Roese <sr@denx.de>
 139
 140 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
 141 Author: Stefan Roese <sr@denx.de>
 142 Date:   Thu Mar 1 07:03:25 2007 +0100
 143
 144     [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
 145
 146     Signed-off-by: Stefan Roese <sr@denx.de>
 147
 148 commit ccbc7036648e465697ca298ba51e0e76dda352a0
 149 Author: Wolfgang Denk <wd@pollux.denx.de>
 150 Date:   Wed Feb 28 01:28:53 2007 +0100
 151
 152     SC3: fix typo in default environment
 153
 154 commit e344568b1b46af85ec32d815586f91bc115d6223
 155 Author: Sergei Poselenov <sposelenov@emcraft.com>
 156 Date:   Tue Feb 27 20:15:30 2007 +0300
 157
 158     MCC200: Fixes for update procedure
 159
 160     - fix logic error in image type handling
 161     - make sure file system images (cramfs etc.) get stored in flash
 162       with image header stripped so they can be mounted through MTD
 163
 164 commit 743571145b37182757d4e688a77860b36ee77573
 165 Author: Wolfgang Denk <wd@pollux.denx.de>
 166 Date:   Tue Feb 27 14:26:04 2007 +0100
 167
 168     Minor code cleanup.
 169
 170 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
 171 Author: Sergei Poselenov <sposelenov@emcraft.com>
 172 Date:   Tue Feb 27 12:40:16 2007 +0300
 173
 174     MCC200 update - add LCD Progress Indicator
 175
 176 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
 177 Author: Stefan Roese <sr@denx.de>
 178 Date:   Thu Feb 22 07:43:34 2007 +0100
 179
 180     [PATCH] get_dev() now unconditionally uses manual relocation
 181
 182     Since the relocation fix is not included yet and we're not sure how
 183     it will be added, this patch removes code that required relocation
 184     to be fixed for now.
 185
 186     Signed-off-by: Stefan Roese <sr@denx.de>
 187
 188 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
 189 Author: Stefan Roese <sr@denx.de>
 190 Date:   Thu Feb 22 07:40:23 2007 +0100
 191
 192     [PATCH] Change systemace driver to select 8 & 16bit mode
 193
 194     As suggested by Grant Likely this patch enables the Xilinx SystemACE
 195     driver to select 8 or 16bit mode upon startup.
 196
 197     Signed-off-by: Stefan Roese <sr@denx.de>
 198
 199 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
 200 Author: Haiying Wang <Haiying.Wang@freescale.com>
 201 Date:   Wed Feb 21 16:52:31 2007 +0100
 202
 203     [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
 204
 205     Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
 206     is fully finished. The sync() is defined in each CPU's io.h file. For
 207     those CPUs which do not need sync for now, a dummy sync() is defined in
 208     their io.h as well.
 209
 210     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
 211
 212 commit da04995c7dc6772013a9a0dc5c767f190c402478
 213 Author: Stefan Roese <sr@denx.de>
 214 Date:   Wed Feb 21 13:44:34 2007 +0100
 215
 216     [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
 217
 218     Signed-off-by: Stefan Roese <sr@denx.de>
 219
 220 commit 751bb57107d78978ae08e697c3deba816f5be091
 221 Author: Stefan Roese <sr@denx.de>
 222 Date:   Tue Feb 20 13:21:57 2007 +0100
 223
 224     [PATCH] Fix relocation problem with "new" get_dev() function
 225
 226     This patch enables the "new" get_dev() function for block devices
 227     introduced by Grant Likely to be used on systems that still suffer
 228     from the relocation problems (manual relocation neede because of
 229     problems with linker script).
 230
 231     Hopefully we can resolve this relocation issue soon for all platform
 232     so we don't need this additional code anymore.
 233
 234     Signed-off-by: Stefan Roese <sr@denx.de>
 235
 236 commit d93e2212f962668b3dce091ff5edc33f2347fe37
 237 Author: Stefan Roese <sr@denx.de>
 238 Date:   Tue Feb 20 13:17:42 2007 +0100
 239
 240     [PATCH] Update SystemACE driver for 16bit access
 241
 242     This patch removes some problems when the Xilinx SystemACE driver
 243     is used with 16bit access on an big endian platform (like the
 244     AMCC Katmai).
 245
 246     Signed-off-by: Stefan Roese <sr@denx.de>
 247
 248 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
 249 Author: Stefan Roese <sr@denx.de>
 250 Date:   Tue Feb 20 13:15:40 2007 +0100
 251
 252     [PATCH] Clean up Katmai (440SPe) linker script
 253
 254     Signed-off-by: Stefan Roese <sr@denx.de>
 255
 256 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
 257 Author: Stefan Roese <sr@denx.de>
 258 Date:   Tue Feb 20 10:57:08 2007 +0100
 259
 260     [PATCH] Add support for the AMCC Katmai (440SPe) eval board
 261
 262     Signed-off-by: Stefan Roese <sr@denx.de>
 263
 264 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
 265 Author: Stefan Roese <sr@denx.de>
 266 Date:   Tue Feb 20 10:51:26 2007 +0100
 267
 268     [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
 269
 270     This patch switches to the desired I2C bus when the date/dtt
 271     commands are called. This can be configured using the
 272     CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
 273
 274     Signed-off-by: Stefan Roese <sr@denx.de>
 275
 276 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
 277 Author: Stefan Roese <sr@denx.de>
 278 Date:   Tue Feb 20 10:43:34 2007 +0100
 279
 280     [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
 281
 282     This patch adds support for the DDR2 controller used on the
 283     440SP and 440SPe. It is tested on the Katmai (440SPe) eval
 284     board and works fine with the following DIMM modules:
 285
 286     - Corsair CM2X512-5400C4 (512MByte per DIMM)
 287     - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
 288     - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
 289
 290     This patch also adds the nice functionality to dynamically
 291     create the TLB entries for the SDRAM (tlb.c). So we should
 292     never run into such problems with wrong (too short) TLB
 293     initialization again on these platforms.
 294
 295     Signed-off-by: Stefan Roese <sr@denx.de>
 296
 297 commit 36d830c9830379045f5daa9f542ac1c990c70068
 298 Author: Stefan Roese <sr@denx.de>
 299 Date:   Tue Feb 20 10:35:42 2007 +0100
 300
 301     [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
 302
 303     Since the existing 4xx SPD SDRAM initialization routines for the
 304     405 SDRAM controller and the 440 DDR controller don't have much in
 305     common this patch splits both drivers into different files.
 306
 307     This is in preparation for the 440 DDR2 controller support (440SP/e).
 308
 309     Signed-off-by: Stefan Roese <sr@denx.de>
 310
 311 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
 312 Author: Stefan Roese <sr@denx.de>
 313 Date:   Tue Feb 20 10:27:08 2007 +0100
 314
 315     [PATCH] PPC4xx: Add support for multiple I2C busses
 316
 317     This patch adds support for multiple I2C busses on the PPC4xx
 318     platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
 319     to make use of this feature.
 320
 321     It also merges the 405 and 440 i2c header files into one common
 322     file 4xx_i2c.h.
 323
 324     Also the 4xx i2c reset procedure is reworked since I experienced
 325     some problems with the first access on the 440SPe Katmai board.
 326
 327     Signed-off-by: Stefan Roese <sr@denx.de>
 328
 329 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
 330 Author: Grant Likely <grant.likely@secretlab.ca>
 331 Date:   Tue Feb 20 09:05:45 2007 +0100
 332
 333     [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
 334
 335     Block device read/write is anonymous data; there is no need to use a
 336     typed pointer.  void * is fine.  Also add a hook for block_read functions
 337
 338     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 339
 340 commit 53758fa20e935cc87eeb0519ed365df753a6f289
 341 Author: Grant Likely <grant.likely@secretlab.ca>
 342 Date:   Tue Feb 20 09:05:38 2007 +0100
 343
 344     [PATCH 8_9] Add block_write hook to block_dev_desc_t
 345
 346     Preparation for future patches which support block device writing
 347
 348     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 349
 350 commit f4852ebe6ca946a509667eb68be42026f837be76
 351 Author: Grant Likely <grant.likely@secretlab.ca>
 352 Date:   Tue Feb 20 09:05:31 2007 +0100
 353
 354     [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
 355
 356     Register read/write does not need to be wrapped in a full function.  The
 357     patch replaces them with macros.
 358
 359     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 360
 361 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
 362 Author: Grant Likely <grant.likely@secretlab.ca>
 363 Date:   Tue Feb 20 09:05:23 2007 +0100
 364
 365     [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
 366
 367     The code in this file is not a command; it is a device driver.  Put it in
 368     the correct place.  There are zero functional changes in this patch, it
 369     only moves the file.
 370
 371     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 372
 373 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
 374 Author: Grant Likely <grant.likely@secretlab.ca>
 375 Date:   Tue Feb 20 09:05:16 2007 +0100
 376
 377     [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
 378
 379     This patch is in preparation of additional changes to the sysace driver.
 380     May as well take this opportunity to fixup the inconsistent whitespace since
 381     this file is about to undergo major changes anyway.
 382
 383     There are zero functional changes in this patch.  It only cleans up the
 384     the whitespace.
 385
 386     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 387
 388 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
 389 Author: Grant Likely <grant.likely@secretlab.ca>
 390 Date:   Tue Feb 20 09:05:07 2007 +0100
 391
 392     [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
 393
 394     isprint is already defined in ctype.c
 395
 396     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 397
 398 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
 399 Author: Grant Likely <grant.likely@secretlab.ca>
 400 Date:   Tue Feb 20 09:05:00 2007 +0100
 401
 402     [PATCH 3_9] Move buffer print code from md command to common function
 403
 404     Printing a buffer is a darn useful thing.  Move the buffer print code
 405     into print_buffer() in lib_generic/
 406
 407     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 408
 409 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
 410 Author: Grant Likely <grant.likely@secretlab.ca>
 411 Date:   Tue Feb 20 09:04:52 2007 +0100
 412
 413     [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
 414
 415     Change the xilinx device drivers and board code to include config.h
 416     instead of xparameters.h directly.  config.h always includes the
 417     correct xparameters file.  This change reduces the posibility of
 418     including the wrong file when adding a new xilinx board port
 419
 420     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 421
 422 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
 423 Author: Grant Likely <grant.likely@secretlab.ca>
 424 Date:   Tue Feb 20 09:04:34 2007 +0100
 425
 426     [PATCH 1_4] Merge common get_dev() routines for block devices
 427
 428     Each of the filesystem drivers duplicate the get_dev routine.  This change
 429     merges them into a single function in part.c
 430
 431     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
 432
 433 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
 434 Author: Wolfgang Denk <wd@pollux.denx.de>
 435 Date:   Mon Feb 19 23:09:51 2007 +0100
 436
 437     MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
 438     as root file system images.
 439
 440 commit 489c696ae7211218961d159e43e722d74c36fcbc
 441 Author: Sergei Poselenov <sposelenov@emcraft.com>
 442 Date:   Wed Feb 14 14:30:28 2007 +0300
 443
 444     MCC200: Extensions to Software Update Mechanism
 445
 446     Update / extend Software Update Mechanism for MCC200 board:
 447
 448     - Add support for rootfs image added. The environment variables
 449       "rootfs_st" and "rootfs_nd" can be used to override the default
 450       values of the image start and end.
 451     - Remove excessive key check code.
 452     - Code cleanup.
 453
 454 commit 4be23a12f23f1372634edc3215137b09768b7949
 455 Author: Stefan Roese <sr@denx.de>
 456 Date:   Mon Feb 19 08:23:15 2007 +0100
 457
 458     [PATCH] Update Sequoia EBC configuration (NOR FLASH)
 459
 460     As spotted by Matthias Fuchs, the READY input should not be
 461     enabled for the NOR FLASH on the Sequoia board.
 462
 463     Signed-off-by: Stefan Roese <sr@denx.de>
 464
 465 commit 2605e90bf676d48123afe5719a846d2b52b24aac
 466 Author: Heiko Schocher <hs@pollux.denx.de>
 467 Date:   Fri Feb 16 07:57:42 2007 +0100
 468
 469     [PATCH] Added support for the jupiter board.
 470
 471     Signed-off-by: Heiko Schocher <hs@denx.de>
 472
 473 commit 497d012e5be0194e1084073d0081eb1a844796b2
 474 Author: Gary Jennejohn <garyj@pollux.denx.de>
 475 Date:   Mon Feb 12 13:11:50 2007 +0100
 476
 477     LPC2292: patch from Siemens.
 478
 479 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
 480 Author: Stefan Roese <sr@denx.de>
 481 Date:   Sat Feb 10 08:49:31 2007 +0100
 482
 483     [PATCH] Add missing p3mx.h file to repository (ups)
 484
 485     Signed-off-by: Stefan Roese <sr@denx.de>
 486
 487 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
 488 Author: Bartlomiej Sieka <tur@semihalf.com>
 489 Date:   Fri Feb 9 10:45:42 2007 +0100
 490
 491     [Motion-PRO] Preliminary support for the Motion-PRO board.
 492
 493 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
 494 Author: Stefan Roese <sr@denx.de>
 495 Date:   Wed Feb 7 16:51:08 2007 +0100
 496
 497     [PATCH] Update some AMCC 4xx board config files (set initrd_high)
 498
 499     Some boards that can have more than 768MBytes of SDRAM need to
 500     set "initrd_high", so that the initrd can be accessed by the
 501     Linux kernel.
 502
 503     Signed-off-by: Stefan Roese <sr@denx.de>
 504
 505 commit 7372ca68227930d03cffa548310524cad5b96733
 506 Author: Stefan Roese <sr@denx.de>
 507 Date:   Fri Feb 2 12:44:22 2007 +0100
 508
 509     [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
 510
 511     Previously the strapping DCR/SDR was read to determine if the internal PCI
 512     arbiter is enabled or not. This strapping bit can be overridden, so now
 513     the current status is read from the correct DCR/SDR register.
 514
 515     Signed-off-by: Stefan Roese <sr@denx.de>
 516
 517 commit 2aa54f651a42d198673318f07a20c89a43e4d197
 518 Author: Stefan Roese <sr@denx.de>
 519 Date:   Fri Feb 2 12:42:08 2007 +0100
 520
 521     [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
 522
 523     Signed-off-by: Stefan Roese <sr@denx.de>
 524
 525 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
 526 Author: Stefan Roese <sr@denx.de>
 527 Date:   Thu Feb 1 13:22:41 2007 +0100
 528
 529     [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
 530
 531     When PCI PNP is enabled the pci pnp configuration routine is called
 532     which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
 533     problems with some PCI cards. For now disable the PCI PNP configuration.
 534
 535     Signed-off-by: Stefan Roese <sr@denx.de>
 536
 537 commit 2902fadade3be7659467e8d074048c6b7068f5c0
 538 Author: Stefan Roese <sr@denx.de>
 539 Date:   Wed Jan 31 16:56:10 2007 +0100
 540
 541     [PATCH] Update 440EPx/440GRx cpu detection
 542
 543     Signed-off-by: Stefan Roese <sr@denx.de>
 544
 545 commit d5ea287b02a6945c3977410e364a879dd1a555c8
 546 Author: Stefan Roese <sr@denx.de>
 547 Date:   Wed Jan 31 16:38:04 2007 +0100
 548
 549     [PATCH] Update esd cpci5200 files
 550
 551     Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 552
 553 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
 554 Author: Stefan Roese <sr@denx.de>
 555 Date:   Wed Jan 31 16:37:34 2007 +0100
 556
 557     [PATCH] Add support for esd mecp5200 board
 558
 559     Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 560
 561 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
 562 Author: Stefan Roese <sr@denx.de>
 563 Date:   Wed Jan 31 12:38:50 2007 +0100
 564
 565     [PATCH] Remove unneccessary yellowstone board config file
 566
 567     Signed-off-by: Stefan Roese <sr@denx.de>
 568
 569 commit e802594b6fa1b166308820c276b96dc0d7cc731c
 570 Author: Stefan Roese <sr@denx.de>
 571 Date:   Tue Jan 30 17:06:10 2007 +0100
 572
 573     [PATCH] Update Sequoia (440EPx) config file
 574
 575     The config file now handles the 2nd target, the Rainier (440GRx)
 576     evaluation board better. Additionally the PPC input clock was
 577     adjusted to match the correct value of 33.0 MHz.
 578
 579     Signed-off-by: Stefan Roese <sr@denx.de>
 580
 581 commit 700200c67e73b83751418abe7815840dca8fd6cb
 582 Author: Stefan Roese <sr@denx.de>
 583 Date:   Tue Jan 30 17:04:19 2007 +0100
 584
 585     [PATCH] Merge Yosemite & Yellowstone board ports
 586
 587     Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
 588     share one config file and all board specific files. This way we
 589     don't have to maintain two different sets of files for nearly
 590     identical boards.
 591
 592     Signed-off-by: Stefan Roese <sr@denx.de>
 593
 594 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
 595 Author: Stefan Roese <sr@denx.de>
 596 Date:   Tue Jan 30 15:01:49 2007 +0100
 597
 598     [PATCH] Update Prodrive SCPU (PDNB3 variant) board
 599
 600     SCPU doesn't use redundant environment in flash.
 601
 602     Signed-off-by: Stefan Roese <sr@denx.de>
 603
 604 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
 605 Author: Stefan Roese <sr@denx.de>
 606 Date:   Tue Jan 30 12:51:07 2007 +0100
 607
 608     [PATCH] alpr: Update alpr board config file
 609
 610     Signed-off-by: Stefan Roese <sr@denx.de>
 611
 612 commit f8db84f132b1e335f20f96138a1f09ed97b08664
 613 Author: Wolfgang Denk <wd@pollux.denx.de>
 614 Date:   Tue Jan 30 00:50:40 2007 +0100
 615
 616     LPC2292 SODIMM port coding style cleanup.
 617
 618 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
 619 Author: Gary Jennejohn <garyj@pollux.denx.de>
 620 Date:   Wed Jan 24 12:16:56 2007 +0100
 621
 622     Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
 623
 624 commit 2daf046ba627f85f44195815778140039636244e
 625 Author: Bartlomiej Sieka <tur@semihalf.com>
 626 Date:   Tue Jan 23 17:22:06 2007 +0100
 627
 628     [iDMR] Add MTD and JFFS2 support, also add default partition definition.
 629
 630 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
 631 Author: Bartlomiej Sieka <tur@semihalf.com>
 632 Date:   Tue Jan 23 14:21:14 2007 +0100
 633
 634     [iDMR] Flash driver on initialisation write-protects some sectors,
 635     currently sectors 0-3. Sector 3 does not need to be protected, though
 636     (U-boot occupies sectors 0-1 and the environment sector 2). This commit
 637     fixes this, i.e., only sectors 0-2 are protected.
 638
 639 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
 640 Author: Bartlomiej Sieka <tur@semihalf.com>
 641 Date:   Tue Jan 23 14:11:22 2007 +0100
 642
 643     [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
 644     "mii device" results in "Unexpected exception"). Fixing this properly
 645     requires some clean-up in the FEC drivers infrastructure for ColdFire, so
 646     this commit disables MII commads for now.
 647
 648 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
 649 Author: Bartlomiej Sieka <tur@semihalf.com>
 650 Date:   Tue Jan 23 13:25:22 2007 +0100
 651
 652     [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
 653     Identification Register (CIR).
 654
 655 commit a4012396645533aef218354eeba754dff0deace8
 656 Author: Wolfgang Denk <wd@pollux.denx.de>
 657 Date:   Fri Jan 19 23:08:39 2007 +0100
 658
 659     Minor code cleanup.
 660
 661 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
 662 Author: Heiko Schocher <hs@pollux.denx.de>
 663 Date:   Fri Jan 19 19:57:10 2007 +0100
 664
 665     [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
 666
 667     Signed-off-by: Heiko Schocher <hs@denx.de>
 668
 669 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
 670 Author: Heiko Schocher <hs@pollux.denx.de>
 671 Date:   Fri Jan 19 18:05:26 2007 +0100
 672
 673     [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
 674                  if you must swap the bytes between reading/writing.
 675                  (Needed for the SC3 board)
 676
 677     Signed-off-by: Heiko Schocher <hs@denx.de>
 678
 679 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
 680 Author: Stefan Roese <sr@denx.de>
 681 Date:   Thu Jan 18 16:05:47 2007 +0100
 682
 683     [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
 684
 685     Signed-off-by: Stefan Roese <sr@denx.de>
 686
 687 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
 688 Author: Stefan Roese <sr@denx.de>
 689 Date:   Thu Jan 18 11:54:52 2007 +0100
 690
 691     [PATCH] Update Prodrive P3Mx support
 692
 693     Signed-off-by: Stefan Roese <sr@denx.de>
 694
 695 commit 34167a36c29ee946b727465db5c014746a08e978
 696 Author: Stefan Roese <sr@denx.de>
 697 Date:   Thu Jan 18 11:48:10 2007 +0100
 698
 699     [PATCH] Add missing Taishan config file
 700
 701     Signed-off-by: Stefan Roese <sr@denx.de>
 702
 703 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
 704 Author: Heiko Schocher <hs@pollux.denx.de>
 705 Date:   Thu Jan 18 11:28:51 2007 +0100
 706
 707     [PATCH] Fix: Compilerwarnings for SC3 board.
 708                  The EBC Configuration Register is now by CFG_EBC_CFG definable
 709                  Added JFFS2 support for the SC3 board.
 710
 711     Signed-off-by: Heiko Schocher <hs@denx.de>
 712
 713 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
 714 Author: Stefan Roese <sr@denx.de>
 715 Date:   Thu Jan 18 10:25:34 2007 +0100
 716
 717     [PATCH] Add support for AMCC Taishan PPC440GX eval board
 718
 719     Signed-off-by: Stefan Roese <sr@denx.de>
 720
 721 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
 722 Author: Wolfgang Denk <wd@pollux.denx.de>
 723 Date:   Tue Jan 16 18:30:50 2007 +0100
 724
 725     Raname solidcard3 into sc3; add redundant env for sc3
 726
 727 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
 728 Author: Wolfgang Denk <wd@pollux.denx.de>
 729 Date:   Tue Jan 16 12:46:35 2007 +0100
 730
 731     Update default environment for Solidcard3
 732
 733 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
 734 Author: Stefan Roese <sr@denx.de>
 735 Date:   Mon Jan 15 09:46:29 2007 +0100
 736
 737     [PATCH] Fix 440SPe rev B detection from previous patch
 738
 739     Signed-off-by: Stefan Roese <sr@denx.de>
 740
 741 commit a443d31410c571ee8f970da819a44d698fdd6b1f
 742 Author: Heiko Schocher <hs@pollux.denx.de>
 743 Date:   Sun Jan 14 13:35:31 2007 +0100
 744
 745         [FIX] correct I2C Writes for the LM81 Sensor.
 746
 747         Signed-off-by: Heiko Schocher <hs@denx.de>
 748
 749 commit 0bba5452835f19a61204edcda3a58112fd8e2208
 750 Author: Wolfgang Denk <wd@pollux.denx.de>
 751 Date:   Sat Jan 13 11:17:10 2007 +0100
 752
 753     Undo commit 3033ebb2: reset command does not take any arguments
 754
 755     Haiying Wang's modification to the reset command was broken, undo it.
 756
 757     Signed-off-by: Wolfgang Denk <wd@denx.de>
 758
 759 commit 95981778cff0038fd9941044d6a3eda810e33258
 760 Author: Stefan Roese <sr@denx.de>
 761 Date:   Sat Jan 13 08:01:03 2007 +0100
 762
 763     [PATCH] Update 440SP(e) cpu revisions
 764
 765     Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
 766
 767     Signed-off-by: Stefan Roese <sr@denx.de>
 768
 769 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
 770 Author: Stefan Roese <sr@denx.de>
 771 Date:   Sat Jan 13 07:59:56 2007 +0100
 772
 773     [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
 774
 775     Now the board revision and the current PCI bus speed are printed after
 776     the board message.
 777
 778     Also the EBC initialising is now done via defines in the board config
 779     file.
 780
 781     Signed-off-by: Stefan Roese <sr@denx.de>
 782
 783 commit 36adff362c2c0141ff8a810d42a7e478f779130f
 784 Author: Stefan Roese <sr@denx.de>
 785 Date:   Sat Jan 13 07:59:19 2007 +0100
 786
 787     [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
 788
 789     Now the board revision and the current PCI bus speed are printed after
 790     the board message.
 791
 792     Also the EBC initialising is now done via defines in the board config
 793     file.
 794
 795     Signed-off-by: Stefan Roese <sr@denx.de>
 796
 797 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
 798 Author: Stefan Roese <sr@denx.de>
 799 Date:   Sat Jan 13 07:57:51 2007 +0100
 800
 801     [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
 802
 803     Now the board revision and the current PCI bus speed are printed after
 804     the board message.
 805
 806     Signed-off-by: Stefan Roese <sr@denx.de>
 807
 808 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
 809 Author: Heiko Schocher <hs@pollux.denx.de>
 810 Date:   Thu Jan 11 15:44:44 2007 +0100
 811
 812         Added support for the SOLIDCARD III board from Eurodesign
 813
 814         Signed-off-by: Heiko Schocher <hs@denx.de>
 815
 816 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
 817 Author: Reinhard Thies <Reinhard.Thies@web.de>
 818 Date:   Wed Jan 10 14:41:14 2007 +0100
 819
 820     Adjusted default environment for cam5200 board.
 821
 822 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
 823 Author: Wolfgang Denk <wd@pollux.denx.de>
 824 Date:   Wed Jan 10 15:35:52 2007 +0100
 825
 826     Update CHANGELOG
 827
 828 commit 787fa15860a57833e50bd30555079a9cd4e519b8
 829 Author: Wolfgang Denk <wd@pollux.denx.de>
 830 Date:   Wed Jan 10 01:28:39 2007 +0100
 831
 832     Fix auto_update for MCC200 board.
 833
 834     The invocation of do_auto_update() is moved to the end of the
 835     misc_init_r() function, after the flash mappings have been
 836     initialized. Please find attached a patch that implements that
 837     change.
 838
 839     Also correct the decoding of the keypad status. With this update, the
 840     key that will trigger the update is Column 2, Row 2.
 841
 842 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
 843 Author: Marian Balakowicz <m8@semihalf.com>
 844 Date:   Wed Jan 10 00:26:15 2007 +0100
 845
 846     CAM5200 flash driver modifications:
 847     - use CFI driver (replaces custom flash driver) for main 'cam5200' target
 848     - add second build target 'cam5200_niosflash' which still uses custom driver
 849
 850 commit 67fea022fa957f59653b5238c7496f80a6b70432
 851 Author: Markus Klotzbuecher <mk@denx.de>
 852 Date:   Tue Jan 9 16:02:48 2007 +0100
 853
 854     SPC1920: cleanup memory contoller setup
 855
 856 commit 8fc2102faa23593c80381437c09f7745a14deb40
 857 Author: Markus Klotzbuecher <mk@denx.de>
 858 Date:   Tue Jan 9 14:57:14 2007 +0100
 859
 860     Fix the cpu speed setup to work with all boards.
 861
 862 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
 863 Author: Markus Klotzbuecher <mk@denx.de>
 864 Date:   Tue Jan 9 14:57:13 2007 +0100
 865
 866     SPC1920: add support for the FM18L08 Ramtron FRAM
 867
 868 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
 869 Author: Markus Klotzbuecher <mk@denx.de>
 870 Date:   Tue Jan 9 14:57:13 2007 +0100
 871
 872     SPC1920: update the HPI register addresses to work with the second
 873     generation of hardware
 874
 875 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
 876 Author: Markus Klotzbuecher <mk@creamnet.de>
 877 Date:   Tue Jan 9 14:57:13 2007 +0100
 878
 879     Miscellanious spc1920 related cleanups
 880
 881 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
 882 Author: Markus Klotzbuecher <mk@denx.de>
 883 Date:   Tue Jan 9 14:57:12 2007 +0100
 884
 885     SPC1920 GO/NOGO led should be set to color red in U-Boot
 886
 887 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
 888 Author: Markus Klotzbuecher <mk@creamnet.de>
 889 Date:   Tue Jan 9 14:57:12 2007 +0100
 890
 891     Add support for the DS3231 RTC
 892
 893 commit 8139567b60d678584b05f0718a681f2047c5e14f
 894 Author: Markus Klotzbuecher <mk@creamnet.de>
 895 Date:   Tue Jan 9 14:57:11 2007 +0100
 896
 897     SMC1 uses external CLK4 instead of BRG on spc1920
 898
 899 commit d8d9de1a02fbd880b613d607143d1f57342affc7
 900 Author: Markus Klotzbuecher <mk@creamnet.de>
 901 Date:   Tue Jan 9 14:57:10 2007 +0100
 902
 903     Update the SPC1920 CMB PLD driver
 904
 905 commit 3f34f869162750e5e999fd140f884f5de952bcfe
 906 Author: Markus Klotzbuecher <mk@creamnet.de>
 907 Date:   Tue Jan 9 14:57:10 2007 +0100
 908
 909     Add / enable I2C support on the spc1920 board
 910
 911 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
 912 Author: Markus Klotzbuecher <mk@creamnet.de>
 913 Date:   Tue Jan 9 14:57:10 2007 +0100
 914
 915     Add support for the tms320671x host port interface (HPI)
 916
 917 commit f4eb54529bb3664c3a562e488b460fe075f79d67
 918 Author: Wolfgang Denk <wd@pollux.denx.de>
 919 Date:   Sun Jan 7 00:13:11 2007 +0100
 920
 921     Prepare for release 1.2.0
 922
 923 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
 924 Author: Stefan Roese <sr@denx.de>
 925 Date:   Sat Jan 6 15:58:09 2007 +0100
 926
 927     [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
 928
 929     This patch fixes a problem with an incorrect setup for the refresh
 930     timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
 931
 932     Signed-off-by: Stefan Roese <sr@denx.de>
 933
 934 commit f16c1da9577f06c5fc08651a4065537407de4635
 935 Author: Stefan Roese <sr@denx.de>
 936 Date:   Sat Jan 6 15:56:13 2007 +0100
 937
 938     [PATCH] Update ALPR board files
 939
 940     This update brings the ALPR board support to the newest version.
 941     It also fixes a problem with the NAND driver.
 942
 943     Signed-off-by: Stefan Roese <sr@denx.de>
 944
 945 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
 946 Author: Stefan Roese <sr@denx.de>
 947 Date:   Fri Jan 5 11:46:05 2007 +0100
 948
 949     [PATCH] nand: Fix problem with oobsize calculation
 950
 951     Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
 952
 953     The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
 954     returns a 0x15. In the code fragment below bits [1:0] determine the
 955     page size, it is ANDed via "(extid & 0x3)" then shifted out. The
 956     next field is also ANDed with 0x3. However this is a one bit field
 957     as defined in the Hynix and Samsung parts in the 4th ID byte that
 958     determins the oobsize, not a two bit field. It works on Samsung as
 959     bits[3:2] are 01. However for the Hynix there is a 11 in these two
 960     bits, so the oob size gets messed up.
 961
 962     I checked the correct linux code and the suggested fix from Brian is
 963     also available in the linux nand mtd driver.
 964
 965     Signed-off-by: Stefan Roese <sr@denx.de>
 966
 967 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
 968 Author: Stefan Roese <sr@denx.de>
 969 Date:   Fri Jan 5 10:40:36 2007 +0100
 970
 971     [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
 972
 973     This fix will make the MAL burst disabling patch for the Linux
 974     EMAC driver obsolete.
 975
 976     Signed-off-by: Stefan Roese <sr@denx.de>
 977
 978 commit 023889838282b6237b401664f22dd22dfba2c066
 979 Author: Stefan Roese <sr@denx.de>
 980 Date:   Fri Jan 5 10:38:05 2007 +0100
 981
 982     [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
 983
 984     This code will optimize the DDR2 controller setup on a board specific
 985     basis.
 986
 987     Note: This code doesn't work right now on the NAND booting image for the
 988     Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
 989
 990     Signed-off-by: Stefan Roese <sr@denx.de>
 991
 992 commit cce4acbb68398634b8d011ed7bb0d12269c84230
 993 Author: Bartlomiej Sieka <tur@semihalf.com>
 994 Date:   Thu Dec 28 19:08:21 2006 +0100
 995
 996     Few V38B changes:
 997       - fix a typo in V38B config file
 998       - move watchdog initialisation earlier in the boot process
 999       - add "wdt=off" to default kernel command line (disables kernel watchdog)
1000
1001 commit 92eb729bad876725aeea908d2addba0800620840
1002 Author: Wolfgang Denk <wd@pollux.denx.de>
1003 Date:   Wed Dec 27 01:26:13 2006 +0100
1004
1005     Fix bug in adaption of Stefano Babic's CFI driver patch.
1006
1007 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
1008 Author: Wolfgang Denk <wd@pollux.denx.de>
1009 Date:   Sun Dec 24 01:42:57 2006 +0100
1010
1011     Minor code cleanup.
1012
1013 commit d784fdb05900ada3686d5778783e1fb328e9fb66
1014 Author: Stefano Babic <sbabic@denx.de>
1015 Date:   Tue Dec 12 00:22:42 2006 +0100
1016
1017     Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
1018
1019 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
1020 Author: Stefan Roese <sr@denx.de>
1021 Date:   Fri Dec 22 14:29:40 2006 +0100
1022
1023     [PATCH] Fix sequoia flash autodetection (finally correct)
1024
1025     Now 32MByte and 64MByte FLASH is know to work and other
1026     configurations should work too.
1027
1028     Signed-off-by: Stefan Roese <sr@denx.de>
1029
1030 commit 82e5236a8b719543643fd26d5827938ab2b94818
1031 Author: Wolfgang Denk <wd@pollux.denx.de>
1032 Date:   Fri Dec 22 10:30:26 2006 +0100
1033
1034     Minor code cleanup; update CHANGELOG.
1035
1036 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
1037 Author: Heiko Schocher <hs@pollux.denx.de>
1038 Date:   Thu Dec 21 17:17:02 2006 +0100
1039
1040     Added support for the TQM8272 board from TQ
1041
1042     Signed-off-by: Heiko Schocher <hs@denx.de>
1043
1044 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
1045 Author: Heiko Schocher <hs@pollux.denx.de>
1046 Date:   Thu Dec 21 16:14:48 2006 +0100
1047
1048     [PATCH] Add support for the UC101 board from MAN.
1049
1050     Signed-off-by: Heiko Schocher <hs@denx.de>
1051
1052 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
1053 Author: Bartlomiej Sieka <tur@semihalf.com>
1054 Date:   Wed Dec 20 00:29:43 2006 +0100
1055
1056     Fix to make the baudrate changes immediate for the MCF52x2 family.
1057
1058 commit daa6e418bcc0c717752e8de939c213c790286096
1059 Author: Bartlomiej Sieka <tur@semihalf.com>
1060 Date:   Wed Dec 20 00:27:32 2006 +0100
1061
1062     Preliminary support for the iDMR board (ColdFire).
1063
1064 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
1065 Author: Andrei Safronov <safronov@pollux.denx.de>
1066 Date:   Fri Dec 8 16:23:08 2006 +0100
1067
1068     automatic update mechanism
1069
1070 commit dd520bf314c7add4183c5191692180f576f96b60
1071 Author: Wolfgang Denk <wd@pollux.denx.de>
1072 Date:   Thu Nov 30 18:02:20 2006 +0100
1073
1074     Code cleanup.
1075
1076 commit 8d9a8610b8256331132227e9e6585c6bd5742787
1077 Author: Wolfgang Denk <wd@pollux.denx.de>
1078 Date:   Thu Nov 30 01:54:07 2006 +0100
1079
1080     Code cleanup. Update CHANGELOG.
1081
1082 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
1083 Author: Grant Likely <grant.likely@secretlab.ca>
1084 Date:   Wed Nov 29 16:23:42 2006 +0100
1085
1086     [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
1087
1088     The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
1089     not the XLB frequency.
1090
1091     This patch depends on the previous patches for MPC52xx device tree support
1092
1093     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1094     Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
1095
1096 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
1097 Author: Stefan Roese <sr@denx.de>
1098 Date:   Wed Nov 29 15:42:37 2006 +0100
1099
1100     [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
1101
1102     This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
1103     and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
1104     quite similar and share the same board directory "prodrive/p3mx"
1105     and the same config file "p3mx.h".
1106
1107     Signed-off-by: Stefan Roese <sr@denx.de>
1108
1109 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
1110 Author: Stefan Roese <sr@denx.de>
1111 Date:   Wed Nov 29 12:53:15 2006 +0100
1112
1113     [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
1114
1115     In the bootvx command the load address was only read from the env
1116     variable "loadaddr" and not optionally passed as paramter as described
1117     in the help. This is fixed with this patch. The behaviour is now the
1118     same as in the bootelf command.
1119
1120     Signed-off-by: Stefan Roese <sr@denx.de>
1121
1122 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
1123 Author: Stefan Roese <sr@denx.de>
1124 Date:   Wed Nov 29 12:03:57 2006 +0100
1125
1126     [PATCH] include/ppc440.h minor error affecting interrupts
1127
1128     Fixed include/ppc440.c for UIC address Bug
1129
1130     Corrects bug affecting the addresses for the universal interrupt
1131     controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
1132
1133     Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
1134     Signed-off-by: Stefan Roese <sr@denx.de>
1135
1136 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
1137 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1138 Date:   Tue Nov 28 16:17:27 2006 -0600
1139
1140     Make fsl-i2c not conflict with SOFT I2C
1141
1142     Signed-off-by: Timur Tabi <timur@freescale.com>
1143
1144 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
1145 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1146 Date:   Tue Nov 28 16:17:18 2006 -0600
1147
1148     Fix I2C master address initialization.
1149
1150     Signed-off-by: Timur Tabi <timur@freescale.com>
1151
1152 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
1153 Author: Kim Phillips <kim.phillips@freescale.com>
1154 Date:   Tue Nov 28 23:31:19 2006 -0600
1155
1156     Assign maintainers for mpc8349emds and mpc8360emds
1157
1158     Dave for mpc8360emds, and me for mpc8349emds.
1159
1160 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
1161 Author: Kim Phillips <kim.phillips@freescale.com>
1162 Date:   Tue Nov 28 23:28:33 2006 -0600
1163
1164     Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
1165
1166     give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
1167     since they are passed by reference to ucc_get_cmxucr_reg and assigned.
1168
1169 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
1170 Author: Timur Tabi <timur@freescale.com>
1171 Date:   Tue Nov 28 12:09:35 2006 -0600
1172
1173     mpc83xx: Miscellaneous code style fixes
1174
1175     Implement various code style fixes and similar changes.
1176
1177     Signed-off-by: Timur Tabi <timur@freescale.com>
1178
1179 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
1180 Author: Stefan Roese <sr@denx.de>
1181 Date:   Tue Nov 28 17:55:49 2006 +0100
1182
1183     [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
1184
1185     This patch adds the code and configuration necessary to boot with an
1186     arch/powerpc Linux kernel.
1187
1188     Signed-off-by: Grant Likely <grant.likely@gmail.com>
1189     Acked-by: Jon Loeliger <jdl@freescale.com>
1190
1191 commit e732faec95a83cb468b4850ae807c8301dde8f6a
1192 Author: Stefan Roese <sr@denx.de>
1193 Date:   Tue Nov 28 16:09:24 2006 +0100
1194
1195     [PATCH] PPC4xx: 440SP Rev. C detection added
1196
1197     Signed-off-by: Stefan Roese <sr@denx.de>
1198
1199 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
1200 Author: Stefan Roese <sr@denx.de>
1201 Date:   Tue Nov 28 11:04:45 2006 +0100
1202
1203     [PATCH] nand: Fix patch merge problem
1204
1205     Signed-off-by: Stefan Roese <sr@denx.de>
1206
1207 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
1208 Author: Wolfgang Denk <wd@pollux.denx.de>
1209 Date:   Mon Nov 27 22:53:53 2006 +0100
1210
1211     Update CHANGELOG
1212
1213 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
1214 Author: Stefan Roese <sr@denx.de>
1215 Date:   Mon Nov 27 17:43:25 2006 +0100
1216
1217     [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
1218
1219     Patch below corrects the setting of the zmiifer register, it was
1220     overwritting the register rather than ORing the settings.
1221
1222     Signed-off-by: Neil Wilson <NWilson@airspan.com>
1223     Signed-off-by: Stefan Roese <sr@denx.de>
1224
1225 commit d1a72545296800b7e219f93104ad5836f0003d66
1226 Author: Stefan Roese <sr@denx.de>
1227 Date:   Mon Nov 27 17:34:10 2006 +0100
1228
1229     [PATCH] Select NAND embedded environment from board configuration
1230
1231     The current NAND Bootloader setup forces the environment
1232     variables to be in line with the bootloader. This change
1233     enables the configuration to be made in the board include
1234     file instead so that it can be individually enabled.
1235
1236     Signed-off-by: Nick Spence <nick.spence@freescale.com>
1237     Signed-off-by: Stefan Roese <sr@denx.de>
1238
1239 commit 15784862857c3c2214498defcfed84ff137fb81e
1240 Author: Stefan Roese <sr@denx.de>
1241 Date:   Mon Nov 27 17:22:19 2006 +0100
1242
1243     [PATCH] nand_wait() timeout fixes
1244
1245     Two fixes for the nand_wait() function in
1246     drivers/nand/nand_base.c:
1247
1248     1. Use correct timeouts. The original timeouts in Linux
1249     source are 400ms and 20ms not 40s and 20s
1250
1251     2. Return correct error value in case of timeout. 0 is
1252     interpreted as OK.
1253
1254     Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
1255     Signed-off-by: Stefan Roese <sr@denx.de>
1256
1257 commit da5553b095bf04f4f109ad7e565dae3aba47b230
1258 Author: Stefan Roese <sr@denx.de>
1259 Date:   Mon Nov 27 17:04:06 2006 +0100
1260
1261     [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
1262
1263     This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
1264     arguments to bootm.  It removes the getenv("disable_of") test that used
1265     to be used for this purpose.
1266
1267     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1268     Acked-by: Jon Loeliger <jdl@freescale.com>
1269
1270 commit a9398e018593782c5fa7d0741955fc1256b34c1e
1271 Author: Wolfgang Denk <wd@pollux.denx.de>
1272 Date:   Mon Nov 27 15:32:42 2006 +0100
1273
1274     Minor code cleanup. Update CHANGELOG.
1275
1276 commit 1729b92cde575476684bffe819d0b7791b57bff2
1277 Author: Stefan Roese <sr@denx.de>
1278 Date:   Mon Nov 27 14:52:04 2006 +0100
1279
1280     [PATCH] 4xx: Fix problem with board specific reset code (now for real)
1281
1282     Signed-off-by: Stefan Roese <sr@denx.de>
1283
1284 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
1285 Author: Stefan Roese <sr@denx.de>
1286 Date:   Mon Nov 27 14:49:51 2006 +0100
1287
1288     [PATCH] alpr: remove unused board specific flash driver
1289
1290     Signed-off-by: Stefan Roese <sr@denx.de>
1291
1292 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
1293 Author: Stefan Roese <sr@denx.de>
1294 Date:   Mon Nov 27 14:48:41 2006 +0100
1295
1296     [PATCH] 4xx: Fix problem with board specific reset code
1297
1298     Signed-off-by: Stefan Roese <sr@denx.de>
1299
1300 commit ec0c2ec725aec9524a177a77ce75559e644a931a
1301 Author: Stefan Roese <sr@denx.de>
1302 Date:   Mon Nov 27 14:46:06 2006 +0100
1303
1304     [PATCH] Remove testing 4xx enet PHY setup
1305
1306     Signed-off-by: Stefan Roese <sr@denx.de>
1307
1308 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
1309 Author: Stefan Roese <sr@denx.de>
1310 Date:   Mon Nov 27 14:12:17 2006 +0100
1311
1312     [PATCH] Update Prodrive ALPR board support (440GX)
1313
1314     Signed-off-by: Stefan Roese <sr@denx.de>
1315
1316 commit 78d620ebb5871d252270dedfad60c6568993b780
1317 Author: Wolfgang Denk <wd@atlas.denx.de>
1318 Date:   Thu Nov 23 22:58:58 2006 +0100
1319
1320     Updates for TQM5200 modules:
1321     - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
1322     - simplify "udate" definitions
1323
1324 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
1325 Author: Stefan Roese <sr@denx.de>
1326 Date:   Wed Nov 22 13:20:50 2006 +0100
1327
1328     [PATCH] PPC4xx start.S: Fix for processor errata
1329
1330     Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
1331     errata 1.12: 440_33 by moving patch up in code.
1332
1333     Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
1334     Signed-off-by: Stefan Roese <sr@denx.de>
1335
1336 commit 4ef6251403f637841000e0fef9e832aa01339822
1337 Author: Stefan Roese <sr@denx.de>
1338 Date:   Mon Nov 20 20:39:52 2006 +0100
1339
1340     [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
1341
1342     Signed-off-by: Stefan Roese <sr@denx.de>
1343
1344 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
1345 Author: Wolfgang Denk <wd@pollux.denx.de>
1346 Date:   Mon Nov 20 10:28:30 2006 +0100
1347
1348     Update CHANGELOG
1349
1350 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
1351 Author: Stefan Roese <sr@denx.de>
1352 Date:   Mon Nov 13 13:55:24 2006 +0100
1353
1354     [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
1355
1356        * Adds support for AMD command set Top Boot flash geometry reversal
1357        * Adds support for reading JEDEC Manufacturer ID and Device ID
1358        * Adds support for displaying command set, manufacturer id and
1359          device ids (flinfo)
1360        * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
1361        * Removes outdated change history (refer to git log instead)
1362
1363     Signed-off-by: Tolunay Orkun <listmember@orkun.us>
1364     Signed-off-by: Stefan Roese <sr@denx.de>
1365
1366 commit b21b511d4c50408f4853f46f06b601272196223f
1367 Author: Wolfgang Denk <wd@pollux.denx.de>
1368 Date:   Sun Nov 12 21:13:23 2006 +0100
1369
1370     Update CHANGELOG
1371
1372 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
1373 Author: Bartlomiej Sieka <tur@semihalf.com>
1374 Date:   Sat Nov 11 22:48:22 2006 +0100
1375
1376     Disable the watchdog in the default config for the V38B board.
1377
1378 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
1379 Author: Bartlomiej Sieka <tur@semihalf.com>
1380 Date:   Sat Nov 11 22:43:00 2006 +0100
1381
1382     Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
1383     group is enabled for USB earlier (in cpu_init_f() instead of
1384     usb_lowlevel_init()).
1385
1386 commit 91650b3e4de688038d4f71279c44858e3e2c6870
1387 Author: Wolfgang Denk <wd@pollux.denx.de>
1388 Date:   Mon Nov 6 17:06:36 2006 +0100
1389
1390     Sequential accesses to non-existent memory must be synchronized,
1391     at least on G2 cores.
1392
1393     This fixes get_ram_size() problems on MPC5200 Rev. B boards.
1394
1395 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
1396 Author: Timur Tabi <timur@freescale.com>
1397 Date:   Fri Nov 3 19:15:00 2006 -0600
1398
1399     mpc83xx: Update 83xx to use fsl_i2c.c
1400
1401     Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
1402     cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
1403     Added multiple I2C bus support to fsl_i2c.c.
1404
1405     Signed-off-by: Timur Tabi <timur@freescale.com>
1406
1407 commit d239d74b1c937984bc519083a8e7de373a390f06
1408 Author: Timur Tabi <timur@freescale.com>
1409 Date:   Fri Nov 3 12:00:28 2006 -0600
1410
1411     mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
1412
1413     Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
1414     tree matches the other 8xxx trees.
1415
1416     Signed-off-by: Timur Tabi <timur@freescale.com>
1417
1418 commit f7fb2e703ec9688541416962724adff70a7322cb
1419 Author: Kim Phillips <kim.phillips@freescale.com>
1420 Date:   Thu Nov 2 19:47:11 2006 -0600
1421
1422     mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
1423
1424 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
1425 Author: Dave Liu <daveliu@freescale.com>
1426 Date:   Thu Nov 2 18:05:50 2006 -0600
1427
1428     mpc83xx: Fix the incorrect dcbz operation
1429
1430     The 834x rev1.x silicon has one CPU5 errata.
1431
1432     The issue is when the data cache locked with
1433     HID0[DLOCK], the dcbz instruction looks like no-op inst.
1434
1435     The right behavior of the data cache is when the data cache
1436     Locked with HID0[DLOCK], the dcbz instruction allocates
1437     new tags in cache.
1438
1439     The 834x rev3.0 and later and 8360 have not this bug inside.
1440
1441     So, when 834x rev3.0/8360 are working with ECC, the dcbz
1442     instruction will corrupt the stack in cache, the processor will
1443     checkstop reset.
1444
1445     However, the 834x rev1.x can work with ECC with these code,
1446     because the sillicon has this cache bug. The dcbz will not
1447     corrupt the stack in cache.
1448     Really, it is the fault code running on fault sillicon.
1449
1450     This patch fix the incorrect dcbz operation. Instead of
1451     CPU FP writing to initialise the ECC.
1452
1453     CHANGELOG:
1454     * Fix the incorrect dcbz operation instead of CPU FP
1455     writing to initialise the ECC memory. Otherwise, it
1456     will corrupt the stack in cache, The processor will checkstop
1457     reset.
1458
1459     Signed-off-by: Dave Liu <daveliu@freescale.com>
1460
1461 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
1462 Author: Kim Phillips <kim.phillips@freescale.com>
1463 Date:   Wed Nov 1 00:10:40 2006 -0600
1464
1465     mpc83xx: add OF_FLAT_TREE bits to 83xx boards
1466
1467     add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
1468     STDOUT_PATH configuration bits to mpc8349emds,
1469     mpc8349itx, and mpc8360emds board code.
1470
1471     redo environment to use bootm with the fdtaddr
1472     for booting ARCH=powerpc kernels by default,
1473     and provide default fdtaddr values.
1474
1475 commit 48041365b3420589ad464ebc7752e0053538b729
1476 Author: Kim Phillips <kim.phillips@freescale.com>
1477 Date:   Wed Nov 1 00:07:25 2006 -0600
1478
1479     mpc83xx: change ft code to modify local-mac-address property
1480
1481     Update 83xx OF code to update local-mac-address properties
1482     for ethernet instead of the obsolete 'address' property.
1483
1484 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
1485 Author: Timur Tabi <timur@freescale.com>
1486 Date:   Tue Oct 31 21:23:16 2006 -0600
1487
1488     mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
1489
1490     This patch also adds an improved I2C set_speed(), which handles all clock
1491     frequencies.
1492
1493     Signed-off-by: Timur Tabi <timur@freescale.com>
1494
1495 commit ac4b5622ce050b5ee1e154b98df630d778661632
1496 Author: Dave Liu <daveliu@freescale.com>
1497 Date:   Tue Oct 31 19:54:59 2006 -0600
1498
1499     mpc83xx: add the README.mpc8360emds
1500
1501     add doc/README.mpc8360emds to accompany the new board support
1502
1503 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
1504 Author: Dave Liu <daveliu@freescale.com>
1505 Date:   Fri Nov 3 12:11:15 2006 -0600
1506
1507     mpc83xx: add QE ethernet support
1508
1509     this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
1510
1511 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
1512 Author: Dave Liu <daveliu@freescale.com>
1513 Date:   Fri Nov 3 19:33:44 2006 -0600
1514
1515     mpc83xx: Add MPC8360EMDS basic board support
1516
1517     Add support for the Freescale MPC8360EMDS board.
1518     Includes DDR, DUART, Local Bus, PCI.
1519
1520 commit 23892e49352de74f7fac36ff90bb1be143d195e3
1521 Author: Dave Liu <daveliu@freescale.com>
1522 Date:   Tue Oct 31 19:30:40 2006 -0600
1523
1524     mpc83xx: add the QUICC Engine (QE) immap file
1525
1526     common QE immap file.  Also required for 8360.
1527
1528 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
1529 Author: Dave Liu <daveliu@freescale.com>
1530 Date:   Tue Oct 31 19:25:38 2006 -0600
1531
1532     mpc83xx: Add 8360 specifics to 83xx immap
1533
1534     Mainly add QE device dependencies, with appropriate 8360 protection.
1535     Lindent also run.
1536
1537 commit 988833324a7fda482c8ac3ca23eb539f8232e404
1538 Author: Timur Tabi <timur@freescale.com>
1539 Date:   Tue Oct 31 19:14:41 2006 -0600
1540
1541     mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
1542
1543     PREREQUISITE PATCHES:
1544
1545     * This patch can only be applied after the following patches have been applied:
1546
1547       1) DNX#2006092142000015 "Add support for the MPC8349E-mITX  1/2"
1548       2) DNX#2006092142000024 "Add support for the MPC8349E-mITX  2/2"
1549
1550     CHANGELOG:
1551
1552     * For the 8349E-mITX, fix some size values in pci_init_board(), enable
1553       the clock for the 2nd USB board (Linux kernel will hang otherwise),
1554       and fix the CONFIG_BOOTARGS macro.
1555
1556     Signed-off-by: Timur Tabi <timur@freescale.com>
1557
1558 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
1559 Author: Timur Tabi <timur@freescale.com>
1560 Date:   Tue Oct 31 18:44:42 2006 -0600
1561
1562     mpc83xx: Add support for the MPC8349E-mITX
1563
1564     PREREQUISITE PATCHES:
1565
1566     * This patch can only be applied after the following patches have been applied:
1567
1568       1) DNX#2006090742000024 "Add support for multiple I2C buses"
1569       2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
1570       3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
1571       4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
1572       5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
1573
1574     CHANGELOG:
1575
1576     * Add support for the Freescale MPC8349E-mITX reference design platform.
1577       The second TSEC (Vitesse 7385 switch) is not supported at this time.
1578
1579     Signed-off-by: Timur Tabi <timur@freescale.com>
1580
1581 commit 183da6d9b446cc12123455844ad1187e2375626f
1582 Author: Ben Warren <bwarren@qstreams.com>
1583 Date:   Tue Sep 12 10:15:53 2006 -0400
1584
1585     Additional MPC8349 support for multibus i2c
1586
1587     Hello,
1588
1589     Here is a patch for a file that was accidentally left out of a previous
1590     attempt.
1591
1592     It accompanies the patch with ticket DNX#2006090742000024
1593
1594     CHANGELOG:
1595             Change PCI initialization to use new multi-bus I2C API.
1596
1597     regards,
1598     Ben
1599
1600 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
1601 Author: Ben Warren <bwarren@qstreams.com>
1602 Date:   Thu Sep 7 16:51:04 2006 -0400
1603
1604     Multi-bus I2C implementation of MPC834x
1605
1606     Hello,
1607
1608     Attached is a patch implementing multiple I2C buses on the MPC834x CPU
1609     family and the MPC8349EMDS board in particular.
1610     This patch requires Patch 1 (Add support for multiple I2C buses).
1611     Testing was performed on a 533MHz board.
1612
1613     /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
1614
1615     Signed-off-by: Ben Warren <bwarren@qstreams.com>
1616
1617     CHANGELOG:
1618             Implemented driver-level code to support two I2C buses on the
1619     MPC834x CPU family and the MPC8349EMDS board.  Available I2C bus speeds
1620     are 50kHz, 100kHz and 400kHz on each bus.
1621
1622     regards,
1623     Ben
1624
1625 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
1626 Author: Ben Warren <bwarren@qstreams.com>
1627 Date:   Thu Sep 7 16:50:54 2006 -0400
1628
1629     Add support for multiple I2C buses
1630
1631     Hello,
1632
1633     Attached is a patch providing support for multiple I2C buses at the
1634     command level.  The second part of the patch includes an implementation
1635     for the MPC834x CPU and MPC8349EMDS board.
1636
1637     /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
1638
1639     Signed-off-by: Ben Warren <bwarren@qstreams.com>
1640
1641     Overview:
1642
1643     1. Include new 'i2c' command (based on USB implementation) using
1644     CONFIG_I2C_CMD_TREE.
1645
1646     2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS.  Note that
1647     the commands to change bus number and speed are only available under the
1648     new 'i2c' command mentioned in the first bullet.
1649
1650     3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
1651     systems.  When CONFIG_I2C_MULTI_BUS is used, this option takes the form
1652     of an array of bus-device pairs.  Otherwise, it is an array of uchar.
1653
1654     CHANGELOG:
1655             Added new 'i2c' master command for all I2C interaction.  This is
1656     conditionally compiled with CONFIG_I2C_CMD_TREE.  New commands added for
1657     setting I2C bus speed as well as changing the active bus if the board
1658     has more than one (conditionally compiled with
1659     CONFIG_I2C_MULTI_BUS).  Updated NOPROBE logic to handle multiple buses.
1660     Updated README.
1661
1662     regards,
1663     Ben
1664
1665 commit bed85caf872714ebf53013967a695c9d63acfc68
1666 Author: Timur Tabi <timur@freescale.com>
1667 Date:   Tue Oct 31 18:13:36 2006 -0600
1668
1669     mpc83xx: Add support for Errata DDR6 on MPC 834x systems
1670
1671     CHANGELOG:
1672
1673     * Errata DDR6, which affects all current MPC 834x processors, lists changes
1674       required to maintain compatibility with various types of DDR memory.  This
1675       patch implements those changes.
1676
1677     Signed-off-by: Timur Tabi <timur@freescale.com>
1678
1679 commit afd6e470f639883002c7c59d562690a5cb0f4865
1680 Author: Timur Tabi <timur@freescale.com>
1681 Date:   Wed Oct 25 18:45:23 2006 -0500
1682
1683     mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
1684
1685 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
1686 Author: Timur Tabi <timur@freescale.com>
1687 Date:   Tue Aug 22 17:07:00 2006 -0500
1688
1689     mpc83xx: Add support for variable flash memory sizes on 83xx systems
1690
1691     CHANGELOG:
1692
1693     * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
1694        window registers, instead of using a hard-coded value of 8MB.
1695
1696     Signed-off-by: Timur Tabi <timur@freescale.com>
1697
1698 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
1699 Author: Tanya Jiang <tanya.jiang@freescale.com>
1700 Date:   Thu Aug 3 18:38:13 2006 +0800
1701
1702     mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
1703
1704     Unified TQM834x variable names with 83xx and consolidated macro
1705     in preparation for the 8360 and other upcoming 83xx devices.
1706
1707     Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
1708
1709 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
1710 Author: Dave Liu <daveliu@freescale.com>
1711 Date:   Wed Oct 25 14:41:21 2006 -0500
1712
1713     mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
1714
1715     Incorporated the common unified variable names and the changes in preparation
1716     for releasing mpc8360 patches.
1717
1718     Signed-off-by: Dave Liu <daveliu@freescale.com>
1719
1720 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
1721 Author: Tanya Jiang <tanya.jiang@freescale.com>
1722 Date:   Thu Aug 3 18:36:02 2006 +0800
1723
1724     mpc83xx: Fix missing build for mpc8349emds pci.c
1725
1726     Make pci build for mpc8349emds
1727
1728     Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
1729
1730 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
1731 Author: Tanya Jiang <tanya.jiang@freescale.com>
1732 Date:   Thu Aug 3 18:39:49 2006 +0800
1733
1734     mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
1735
1736     Removed unused file resetvec.S for mpc83xx cpu
1737
1738     Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
1739
1740 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
1741 Author: Nick Spence <Nick.Spence@freescale.com>
1742 Date:   Sat Sep 30 00:32:59 2006 -0700
1743
1744     NAND Flash verify across block boundaries
1745
1746     This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
1747     defined
1748     and the write crosses a block boundary. The pointer to the verification
1749     buffer (bufstart) is not being updated to reflect the starting of the
1750     new
1751     block so the verification of the second block fails.
1752
1753     CHANGELOG:
1754
1755     * Fix NAND FLASH page verification across block boundaries
1756
1757 commit f484dc791a3932537213c43c654cc1295c64b84c
1758 Author: Nick Spence <nick.spence@freescale.com>
1759 Date:   Thu Sep 7 07:39:46 2006 -0700
1760
1761     Added RGMII support to the TSECs and Marvell 881111 Phy
1762
1763     Added a phy initialization to adjust the RGMII RX and TX timing
1764     Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
1765
1766     Signed-off-by: Nick Spence <nick.spence@freescale.com>
1767
1768 commit c59200443072353044aa4bf737a5a60f9a9af231
1769 Author: Wolfgang Denk <wd@pollux.denx.de>
1770 Date:   Thu Nov 2 15:15:01 2006 +0100
1771
1772     Release U-Boot 1.1.6
1773
1774 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
1775 Author: Bartlomiej Sieka <tur@semihalf.com>
1776 Date:   Wed Nov 1 02:04:38 2006 +0100
1777
1778     Finish up support for MarelV38B board
1779      - add watchdog support
1780      - enable GPIO_WKUP_7 pin for input
1781      - code cleanup
1782
1783 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
1784 Author: Bartlomiej Sieka <tur@semihalf.com>
1785 Date:   Wed Nov 1 01:45:46 2006 +0100
1786
1787     - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
1788           * remove warnings when compiling ethaddr.c
1789           * adjust linker script (fixes a crash resulting from incorrect
1790           definition of __u_boot_cmd_start)
1791     - Some MarelV38B code cleanup.
1792
1793 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
1794 Author: Bartlomiej Sieka <tur@semihalf.com>
1795 Date:   Wed Nov 1 01:38:16 2006 +0100
1796
1797     - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
1798       MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
1799       Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
1800       MPC5XXX_WU_GPIO_DATA_O for affected boards.
1801
1802     - Add defintions for some MPC5XXX GPIO pins.
1803
1804 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
1805 Author: Bartlomiej Sieka <tur@semihalf.com>
1806 Date:   Wed Nov 1 01:34:29 2006 +0100
1807
1808     Changed MarelV38B board make target to lowercase. Config file cleanup.
1809
1810 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
1811 Author: Wolfgang Denk <wd@pollux.denx.de>
1812 Date:   Sun Oct 29 01:03:51 2006 +0200
1813
1814     Automatically adjust ARFLAGS so "make -s" is really silent.
1815
1816 commit fae684e89844856383bdf101440889557df3e6b1
1817 Author: Stefan Roese <sr@denx.de>
1818 Date:   Sat Oct 28 16:45:00 2006 +0200
1819
1820     [PATCH] omap925.c: Remove unused functions
1821
1822     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1823     Signed-off-by: Stefan Roese <sr@denx.de>
1824
1825 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
1826 Author: Stefan Roese <sr@denx.de>
1827 Date:   Sat Oct 28 17:12:58 2006 +0200
1828
1829     [PATCH] Add some missing machtypes for netstar & voiceblue boards
1830
1831     Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
1832     numbers in code.
1833
1834     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1835     Signed-off-by: Stefan Roese <sr@denx.de>
1836
1837 commit 856f054410cef52d868feb330168b2a4c4091328
1838 Author: Stefan Roese <sr@denx.de>
1839 Date:   Sat Oct 28 15:55:52 2006 +0200
1840
1841     [PATCH] NAND: Partition name support added to NAND subsystem
1842
1843     chpart, nboot and NAND subsystem related commands now accept also partition
1844     name to specify offset.
1845
1846     Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1847     Signed-off-by: Stefan Roese <sr@denx.de>
1848
1849 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
1850 Author: Wolfgang Denk <wd@pollux.denx.de>
1851 Date:   Sat Oct 28 02:29:44 2006 +0200
1852
1853     Update CHANGELOG.
1854
1855 commit 2751a95abd1b96911081c357e96a12fa97b40dee
1856 Author: Wolfgang Denk <wd@pollux.denx.de>
1857 Date:   Sat Oct 28 02:29:14 2006 +0200
1858
1859     Enable commandline editing and hush shell on all TQM boards.
1860
1861 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
1862 Author: Wolfgang Denk <wd@pollux.denx.de>
1863 Date:   Sat Oct 28 02:28:02 2006 +0200
1864
1865     README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
1866
1867 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
1868 Author: Wolfgang Denk <wd@denx.de>
1869 Date:   Sat Oct 28 01:14:32 2006 +0200
1870
1871     Check for illegal character '=' in environment variable names.
1872
1873     Make sure the string passed as variable name does not contain a '='
1874     character. This not only prevents the common error or typing
1875     "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
1876     also closes a backdoor which allowed to delete write-protected
1877     environment variables, for example by using "setenv ethaddr=".
1878
1879 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
1880 Author: Wolfgang Denk <wd@pollux.denx.de>
1881 Date:   Sat Oct 28 00:38:39 2006 +0200
1882
1883     Minor code cleanup.
1884
1885 commit e11887a77d81077416a2d1c5e0354916fee8c034
1886 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1887 Date:   Thu Oct 26 17:55:31 2006 +0200
1888
1889     Don't pass any debug options directly to the assembler
1890
1891     When passing the -g option to gcc, gcc automatically selects a
1892     suitable --g<format> option to pass on to the assembler.
1893     Thus, there's no point in forcing a specific debug option on the
1894     assembler using the -Wa mechanism.
1895
1896     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1897
1898 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
1899 Author: Jon Loeliger <jdl@freescale.com>
1900 Date:   Fri Oct 27 07:47:22 2006 -0500
1901
1902     MPC86xx: Cleaned up unused and conditionally used local variables.
1903
1904     Signed-off-by: Jon Loeliger <jdl@freescale.com>
1905
1906 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
1907 Author: Wolfgang Denk <wd@pollux.denx.de>
1908 Date:   Fri Oct 27 11:55:21 2006 +0200
1909
1910     Fix "ar" flags in some Makefiles to allow for silent "make -s"
1911
1912 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
1913 Author: Ben Warren <bwarren@qstreams.com>
1914 Date:   Thu Oct 26 14:38:25 2006 -0400
1915
1916     Fix TSEC driver (now for real): avoid crashes if PHY is not attached
1917     to a TSEC (e.g. a switch is connected via RMII) or
1918     if the PHY is defective/incorrectly configured.
1919
1920     Signed-off-by: Ben Warren <bwarren@qstreams.com>
1921
1922 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
1923 Author: Ben Warren <bwarren@qstreams.com>
1924 Date:   Thu Oct 26 14:38:25 2006 -0400
1925
1926     Fix TSEC driver: avoid crashes if PHY is not attached
1927     to a TSEC (e.g. a switch is connected via RMII) or
1928     if the PHY is defective/incorrectly configured.
1929
1930     Signed-off-by: Ben Warren <bwarren@qstreams.com>
1931
1932 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
1933 Author: Wolfgang Denk <wd@pollux.denx.de>
1934 Date:   Thu Oct 26 16:24:31 2006 +0200
1935
1936     Code cleanup.
1937
1938 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
1939 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1940 Date:   Wed Oct 25 15:48:59 2006 +0200
1941
1942     Finish up support for the ATSTK1000/ATSTK1002 boards
1943
1944     Add atstk1002_config target to Makefile and move the AVR32 section
1945     down below Blackfin so that it doesn't end up in the middle of
1946     MIPS.
1947
1948     Drop the autogenerated linker script thing for now. Will have to
1949     revisit how to handle chips with different flash and RAM layout
1950     later.
1951
1952     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1953
1954 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
1955 Author: Kumar Gala <galak@kernel.crashing.org>
1956 Date:   Tue Oct 24 23:47:37 2006 -0500
1957
1958     Added support for Multi-Image files that contain a device tree
1959
1960     If a Multi-Image file contains a third image we try to use it as a
1961     device tree.  The device tree image is assumed to be uncompressed in the
1962     image file.  We automatically allocate space for the device tree in memory
1963     and provide an 8k pad to allow more than a reasonable amount of growth.
1964
1965     Additionally, a device tree that was contained in flash will now automatically
1966     get copied to system memory as part of boot.  Previously an error was
1967     reported if one tried to boot a device tree that was in flash.
1968
1969     Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1970
1971 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
1972 Author: Wolfgang Denk <wd@denx.de>
1973 Date:   Tue Oct 24 21:35:55 2006 +0200
1974
1975     Switch to automatically generated CHANGELOG file.
1976     (use "make CHANGELOG" to update it from time to time)
1977
1978 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
1979 Author: Stefan Roese <sr@denx.de>
1980 Date:   Tue Oct 24 18:06:48 2006 +0200
1981
1982     Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
1983     Patch by Stefan Roese, 24 Oct 2006
1984
1985 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
1986 Author: Wolfgang Denk <wd@pollux.denx.de>
1987 Date:   Tue Oct 24 17:24:55 2006 +0200
1988
1989     Merge with /home/wd/git/u-boot/master
1990
1991 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
1992 Author: Wolfgang Denk <wd@pollux.denx.de>
1993 Date:   Tue Oct 24 15:32:57 2006 +0200
1994
1995     Code cleanup
1996
1997 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
1998 Author: Wolfgang Denk <wd@pollux.denx.de>
1999 Date:   Tue Oct 24 14:51:36 2006 +0200
2000
2001     Move atstk1000 files into vendor specific directory.
2002     Patch by Haavard Skinnemoen, 12 Sep 2006
2003
2004 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
2005 Author: Wolfgang Denk <wd@pollux.denx.de>
2006 Date:   Tue Oct 24 14:42:37 2006 +0200
2007
2008     Add ATSTK1000 and ATSTK1002 board support
2009     Patch by Haavard Skinnemoen, 06 Sep 2006
2010
2011     This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
2012     daughterboard.
2013
2014     ATSTK1000 is a full-featured development board for AT32AP CPUs. It
2015     has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
2016     and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
2017     CompactFlash cards. For more information, please see this page:
2018
2019     http://www.atmel.com/dyn/products/tools.asp?family_id=682
2020
2021     The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
2022     AT32AP7000 chip.
2023
2024     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2025
2026 commit f93ae788c3640fcde5db383471d45548ff4060d0
2027 Author: Wolfgang Denk <wd@pollux.denx.de>
2028 Date:   Tue Oct 24 14:31:24 2006 +0200
2029
2030     Add common serial driver for Atmel AT32 and AT91 chips
2031     Patch by Haavard Skinnemoen, 06 Sep 2006
2032
2033     This is a first attempt at creating a common serial driver for Atmel
2034     chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
2035     be possible to support AT91RM9200 and other ARM-based chips with some
2036     minor modifications.
2037
2038     There's nothing fundamentally AVR32-specific in this driver, but it
2039     does use some features which are currently only defined for the
2040     AT32AP CPU port:
2041       * pm_get_clock_freq: Obtain the clock frequency of a given domain
2042       * gd->console_uart: A "struct device" containing information about
2043         register mappings, gpio resources and clocks associated with the
2044         UART device.
2045
2046     For more information about these features, please see the "AT32AP
2047     CPU" patch.
2048
2049 commit 72a087e04705c26cad982879ebd06b5281bf825a
2050 Author: Wolfgang Denk <wd@pollux.denx.de>
2051 Date:   Tue Oct 24 14:27:35 2006 +0200
2052
2053     Add AT32AP CPU and AT32AP7000 SoC support
2054     Patch by Haavard Skinnemoen, 06 Sep 2006
2055
2056     This patch adds support for the AT32AP CPU family and the AT32AP7000
2057     chip, which is the first chip implementing the AVR32 architecture.
2058
2059     The AT32AP CPU core is a high-performance implementation featuring a
2060     7-stage pipeline, separate instruction- and data caches, and a MMU.
2061     For more information, please see the "AVR32 AP Technical Reference":
2062
2063     http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
2064
2065     In addition to this, the AT32AP7000 chip comes with a large set of
2066     integrated peripherals, many of which are shared with the AT91 series
2067     of ARM-based microcontrollers from Atmel. Full data sheet is
2068     available here:
2069
2070     http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
2071
2072     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2073
2074 commit 7b64fef33c66be648826c0ff9758298ef13d0604
2075 Author: Wolfgang Denk <wd@pollux.denx.de>
2076 Date:   Tue Oct 24 14:21:16 2006 +0200
2077
2078     Add AVR32 architecture support
2079     Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
2080
2081     This patch adds common infrastructure code for the Atmel AVR32
2082     architecture. See doc/README.AVR32 for details.
2083
2084     Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2085
2086 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
2087 Author: Wolfgang Denk <wd@pollux.denx.de>
2088 Date:   Tue Oct 24 13:57:33 2006 +0200
2089
2090     Use -g instead of -gstabs in AFLAGS_DEBUG
2091     Patch by Haavard Skinnemoen, 30 Aug 2006
2092
2093     In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
2094     matter what the target's preferred debugging format is. This patch
2095     simply replaces -gstabs with -g, so that the default debugging format
2096     for the architecture is used.
2097
2098 commit 965829872169c2996023840d98e1d85ad148d629
2099 Author: Wolfgang Denk <wd@pollux.denx.de>
2100 Date:   Tue Oct 24 13:55:18 2006 +0200
2101
2102     Fix/workaround broken dependency handling with make 3.81
2103     Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
2104
2105 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
2106 Author: Marian Balakowicz <m8@semihalf.com>
2107 Date:   Mon Oct 23 22:17:05 2006 +0200
2108
2109     Fix sequoia separate object direcory building problems.
2110
2111 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
2112 Author: Jon Loeliger <jdl@freescale.com>
2113 Date:   Fri Oct 20 17:16:35 2006 -0500
2114
2115     Use generic I2C register block on 85xx and 86xx.
2116
2117     Replace private IMMAP I2C structures with generic reg block
2118     and allow 86xx to have multiple I2C device busses.
2119
2120     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2121
2122 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
2123 Author: Jon Loeliger <jdl@freescale.com>
2124 Date:   Fri Oct 20 15:54:34 2006 -0500
2125
2126     Fix compilation warnings on a few 85xx boards.
2127
2128     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2129
2130 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
2131 Author: Jon Loeliger <jdl@freescale.com>
2132 Date:   Fri Oct 20 15:50:15 2006 -0500
2133
2134     Converted all 85xx boards to use a common FSL I2C driver.
2135     Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
2136     And removed hard i2c path from a few u-boot.lds scipts too.
2137     Minor whitespace cleanups along the way.
2138
2139     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2140
2141 commit 4d45f69e362b05892c9e92a7907e5820995612aa
2142 Author: Jon Loeliger <jdl@freescale.com>
2143 Date:   Thu Oct 19 12:02:24 2006 -0500
2144
2145     Rewrite a series of goto statements as a sequences of
2146     conditional expressions instead.
2147
2148     Use consistent return code 0/-1 for good/bad indicators.
2149
2150     Include one fewer file if the driver isn't used at all.
2151
2152     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2153
2154 commit 7237c033b02fe295880435f1eb80819a0c987532
2155 Author: Jon Loeliger <jdl@freescale.com>
2156 Date:   Thu Oct 19 11:02:16 2006 -0500
2157
2158     Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
2159
2160     in an effort to begin to unify the umpteen FSL I2C drivers that
2161     are all otherwise very similar.
2162
2163     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2164
2165 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
2166 Author: Jon Loeliger <jdl@freescale.com>
2167 Date:   Thu Oct 19 11:33:52 2006 -0500
2168
2169     * Fix a bunch of compiler warnings for gcc 4.0
2170
2171     Signed-off-by: Matthew McClintock <msm@freescale.com>
2172
2173 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
2174 Author: Stefan Roese <sr@denx.de>
2175 Date:   Tue Oct 17 06:14:31 2006 +0200
2176
2177     Add monitor functions for indirect access to PPC440 DCR's
2178     Patch by Leonid Baryudin, 12 Oct 2006
2179
2180 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
2181 Author: Jon Loeliger <jdl@freescale.com>
2182 Date:   Fri Oct 13 16:47:53 2006 -0500
2183
2184     Fixed leading whitespace issues.
2185     Removed spurious LAWAR thing.
2186
2187     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2188
2189 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
2190 Author: Jon Loeliger <jdl@freescale.com>
2191 Date:   Thu Oct 12 10:42:36 2006 -0500
2192
2193     Remove unneeded include files and local variable.
2194
2195     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2196
2197 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
2198 Author: Grant Likely <grant.likely@secretlab.ca>
2199 Date:   Tue Oct 10 00:23:32 2006 -0600
2200
2201     Fix possible uninitialized variable compiler warning.
2202
2203     When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
2204     do_bootm_linux() may be uninitialized.  There is no possibility in the
2205     current code that len will get used uninitialized, but this fix follows
2206     the existing convention of setting both len and data to zero at the same
2207     time.
2208
2209     Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2210
2211 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
2212 Author: Matthew McClintock <msm@freescale.com>
2213 Date:   Wed Oct 11 15:13:01 2006 -0500
2214
2215     * Fix a bunch of compiler warnings for gcc 4.0
2216
2217     Signed-off-by: Matthew McClintock <msm@freescale.com>
2218
2219 commit bf651baa365e5447246aad6a633ccd667cf24a39
2220 Author: Jon Loeliger <jdl@freescale.com>
2221 Date:   Wed Oct 11 10:10:43 2006 -0500
2222
2223     Move "ar" flags to config.mk to allow for silent "make -s"
2224
2225 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
2226 Author: Jon Loeliger <jdl@freescale.com>
2227 Date:   Tue Oct 10 17:19:03 2006 -0500
2228
2229     Coding style changes to remove local varible blocks
2230     and reformat a bit nicer.
2231
2232 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
2233 Author: Jon Loeliger <jdl@freescale.com>
2234 Date:   Tue Oct 10 17:16:04 2006 -0500
2235
2236     Fix whitespace issues.
2237
2238 commit 7b382b7125f2397cce63253df62f183e3dfa2770
2239 Author: Jon Loeliger <jdl@freescale.com>
2240 Date:   Tue Oct 10 17:14:45 2006 -0500
2241
2242     Fix whitespace issues.
2243
2244 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
2245 Author: Jon Loeliger <jdl@freescale.com>
2246 Date:   Tue Oct 10 17:06:53 2006 -0500
2247
2248     Fix whitespace issues.
2249
2250 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
2251 Author: Jon Loeliger <jdl@freescale.com>
2252 Date:   Tue Oct 10 17:03:43 2006 -0500
2253
2254     Ran lindent and cleaned up whitespace issues.
2255     Format for 80-columns too.
2256
2257 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
2258 Author: Jon Loeliger <jdl@freescale.com>
2259 Date:   Tue Oct 10 17:02:22 2006 -0500
2260
2261     Fix whitespace and 80-col issues.
2262
2263 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
2264 Author: Stefan Roese <sr@denx.de>
2265 Date:   Sat Oct 7 11:36:51 2006 +0200
2266
2267     CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
2268     Patch by Stefan Roese, 07 Oct 2006
2269
2270 commit 5bc528fa4da751d472397b308137238a6465afd2
2271 Author: Stefan Roese <sr@denx.de>
2272 Date:   Sat Oct 7 11:35:25 2006 +0200
2273
2274     Update ALPR code (NAND support working now)
2275     Patch by Stefan Roese, 07 Oct 2006
2276
2277 commit 77d5034847d328753b80c46b83f960a14a26f40e
2278 Author: Stefan Roese <sr@denx.de>
2279 Date:   Sat Oct 7 11:33:03 2006 +0200
2280
2281     Remove compile warnings in fpga code
2282     Patch by Stefan Roese, 07 Oct 2006
2283
2284 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
2285 Author: Stefan Roese <sr@denx.de>
2286 Date:   Sat Oct 7 11:30:52 2006 +0200
2287
2288     Add CONFIG_BOARD_RESET to configure board specific reset function
2289     Patch by Stefan Roese, 07 Oct 2006
2290
2291 commit f55df18187e7a45cb73fec4370d12135e6691ae1
2292 Author: John Traill <john.traill@freescale.com>
2293 Date:   Fri Sep 29 08:23:12 2006 +0100
2294
2295     Fix missing tCycle/modfreq calculation.
2296
2297     Signed-off-by: John Traill <john.traill@freescale.com>
2298
2299 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
2300 Author: Andy Fleming <afleming@freescale.com>
2301 Date:   Wed Sep 13 10:33:35 2006 -0500
2302
2303     Updated config headers to add default FDT-based booting
2304
2305 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
2306 Author: Andy Fleming <afleming@freescale.com>
2307 Date:   Wed Sep 13 10:34:18 2006 -0500
2308
2309     Add support for eTSEC 3 & 4 on 8548 CDS
2310
2311     * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
2312       This will only work on rev 1.3 boards (but doesn't break older boards)
2313     * Cleaned up some comments to reflect the expanded role of tsec
2314       in other systems
2315
2316 commit 084d648b109c8984f83674043c1a7fa3885ef801
2317 Author: Andy Fleming <afleming@freescale.com>
2318 Date:   Wed Sep 13 10:33:56 2006 -0500
2319
2320     Added code to support 2.6.18 PCI changes in u-boot
2321
2322     * Added code to swizzle the IRQ map for the PCI
2323
2324 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
2325 Author: Jon Loeliger <jdl@freescale.com>
2326 Date:   Tue Sep 19 09:34:10 2006 -0500
2327
2328     Modified makefile for new build mechanism.
2329
2330     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2331
2332 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
2333 Author: Jon Loeliger <jdl@freescale.com>
2334 Date:   Thu Sep 14 08:40:36 2006 -0500
2335
2336     Handle 86xx SVR values according to the new Reference Manual.
2337     Both 8641 and 8641D have SVR == 0x8090, and are distinguished
2338     by the byte in bits 16-23 instead.
2339     Thanks to Jason Jin for noticing.
2340
2341     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2342
2343 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
2344 Author: Zhang Wei <wei.zhang@freescale.com>
2345 Date:   Mon Aug 28 14:25:31 2006 +0800
2346
2347     Fixed an OF-tree off-by-one bug when adding a new property name.
2348     This bug will cause the kernel booting to pause a long time.
2349
2350     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2351     (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
2352
2353 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
2354 Author: Jon Loeliger <jdl@freescale.com>
2355 Date:   Tue Aug 29 11:05:09 2006 -0500
2356
2357     Remove trailing empty lines.
2358
2359 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
2360 Author: Jon Loeliger <jdl@freescale.com>
2361 Date:   Tue Aug 29 09:48:49 2006 -0500
2362
2363     Remove bogus msync and use volatile asm.
2364
2365 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
2366 Author: Jon Loeliger <jdl@freescale.com>
2367 Date:   Tue Aug 29 08:17:14 2006 -0500
2368
2369     Add myself as maintainer for MPC8641HPCN.
2370
2371 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
2372 Author: Zhang Wei <wei.zhang@freescale.com>
2373 Date:   Mon Aug 28 14:25:31 2006 +0800
2374
2375     Fixed an OF-tree off-by-one bug when adding a new property name.
2376     This bug will cause the kernel booting to pause a long time.
2377
2378     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2379
2380 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
2381 Author: Haiying Wang <haiying.wang@freescale.com>
2382 Date:   Fri Aug 25 14:38:34 2006 -0400
2383
2384     Change ramdiskaddr and dtbaddr
2385     Remove PEX fluff commands.
2386
2387     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
2388     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2389
2390 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
2391 Author: Matthew McClintock <msm@freescale.com>
2392 Date:   Wed Aug 23 13:32:45 2006 -0500
2393
2394     * Another small fix for booting with disable_of
2395
2396     Signed-off-by: Matthew McClintock <msm@freescale.com>
2397
2398 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
2399 Author: Jon Loeliger <jdl@freescale.com>
2400 Date:   Wed Aug 23 11:04:43 2006 -0500
2401
2402     Cleanup and lindent new AHCI driver.
2403
2404 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
2405 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
2406 Date:   Wed Aug 23 19:15:12 2006 +0800
2407
2408     Add AHCI define and sata support for MPC8641HPCN board.
2409
2410     Signed-off-by:Jason Jin<jason.jin@freescale.com>
2411
2412 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
2413 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
2414 Date:   Wed Aug 23 19:10:44 2006 +0800
2415
2416     Add AHCI support to u-boot
2417
2418     Add AHCI support in u-boot, enable the sata disk controllers which
2419     following the AHCI protocol.
2420
2421     Signed-off-by:Jason Jin<jason.jin@freescale.com>
2422
2423 commit d8ea2acf5f137cae99417df4f573d036ee384668
2424 Author: Zhang Wei <wei.zhang@freescale.com>
2425 Date:   Wed Aug 23 17:54:32 2006 +0800
2426
2427     Add dtb boot-up parameter to default boot commands.
2428
2429     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2430
2431 commit b93775c2036b99baa390ea425c4771895bbc63c4
2432 Author: Jon Loeliger <jdl@freescale.com>
2433 Date:   Tue Aug 22 18:26:08 2006 -0500
2434
2435     Cleanup even more poorly introduced whitespace.
2436
2437 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
2438 Author: Jon Loeliger <jdl@freescale.com>
2439 Date:   Tue Aug 22 18:07:00 2006 -0500
2440
2441     Cleanup more poorly introduced whitespace.
2442
2443 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
2444 Author: Jon Loeliger <jdl@freescale.com>
2445 Date:   Tue Aug 22 17:54:05 2006 -0500
2446
2447     Cleanup poorly introduced whitespace.
2448
2449 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
2450 Author: Jon Loeliger <jdl@freescale.com>
2451 Date:   Tue Aug 22 12:25:27 2006 -0500
2452
2453     General indent and whitespace cleanups.
2454
2455 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
2456 Author: Jon Loeliger <jdl@freescale.com>
2457 Date:   Tue Aug 22 12:06:18 2006 -0500
2458
2459     General indent and whitespace cleanups.
2460
2461 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
2462 Author: Jon Loeliger <jdl@freescale.com>
2463 Date:   Tue Aug 22 10:42:21 2006 -0500
2464
2465     Cleanup compiler warnings.
2466
2467 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
2468 Author: Matthew McClintock <msm@freescale.com>
2469 Date:   Tue Aug 22 09:31:59 2006 -0500
2470
2471     Fix disable_of booting
2472
2473     Signed-off-by: Matthew McClintock <msm@freescale.com>
2474
2475 commit 87a449c8ac396420cb24260f717ea9e6faa82047
2476 Author: Matthew McClintock <msm@freescale.com>
2477 Date:   Tue Aug 22 09:23:55 2006 -0500
2478
2479     Support for FDT in uImage format, error when using FDT from flash
2480
2481     Signed-off-by: Matthew McClintock <msm@freescale.com>
2482
2483 commit 75c299c38369d01addd5e054b8a16217b70f4a86
2484 Author: Haiying Wang <haiying.wang@freescale.com>
2485 Date:   Tue Aug 15 15:12:55 2006 -0400
2486
2487     Unlock cache before kernel starts up for MPC86xx
2488
2489 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
2490 Author: Haiying Wang <haiying.wang@freescale.com>
2491 Date:   Tue Aug 15 15:13:15 2006 -0400
2492
2493     Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
2494
2495 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
2496 Author: Haiying Wang <haiying.wang@freescale.com>
2497 Date:   Tue Aug 15 15:12:55 2006 -0400
2498
2499     Unlock cache before kernel starts up for MPC86xx
2500
2501 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
2502 Author: Haiying Wang <haiying.wang@freescale.com>
2503 Date:   Tue Aug 15 15:13:15 2006 -0400
2504
2505     Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
2506
2507 commit 86c8e17f25e972a7e272950a0735fad84e082b88
2508 Author: Matthew McClintock <msm@freescale.com>
2509 Date:   Wed Aug 16 13:59:47 2006 -0500
2510
2511     * Fix disable_of booting
2512
2513     Signed-off-by: Matthew McClintock <msm@freescale.com>
2514
2515 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
2516 Author: Matthew McClintock <msm@freescale.com>
2517 Date:   Wed Aug 16 10:54:09 2006 -0500
2518
2519     * Support for FDT in uImage format, error when using FDT from flash
2520
2521     Signed-off-by: Matthew McClintock <msm@freescale.com>
2522
2523 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
2524 Author: Stefan Roese <sr@denx.de>
2525 Date:   Tue Aug 15 14:22:35 2006 +0200
2526
2527     Add initial support for the ALPR board from Prodrive
2528     NAND needs some additional testing
2529     Patch by Heiko Schocher, 15 Aug 2006
2530
2531 commit f0ff4692ff3372dec55074a8eb444943ab095abb
2532 Author: Stefan Roese <sr@denx.de>
2533 Date:   Tue Aug 15 14:15:51 2006 +0200
2534
2535     Add FPGA Altera Cyclone 2 support
2536     Patch by Heiko Schocher, 15 Aug 2006
2537
2538 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
2539 Author: Jon Loeliger <jdl@freescale.com>
2540 Date:   Mon Aug 14 15:33:38 2006 -0500
2541
2542     Fix BAT0 to actually be cacheable, non-guarded as documented.
2543
2544     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2545
2546 commit 40bc83559db5745681909fd7382ae509567e116d
2547 Author: Jon Loeliger <jdl@freescale.com>
2548 Date:   Wed Aug 9 15:32:16 2006 -0500
2549
2550     Removed MPC8641HPCN DTS source file from build.
2551     It is no longer linked into U-Boot; its sources are
2552     now located in the kernel tree.
2553
2554     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2555
2556 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
2557 Author: Matthew McClintock <msm@freescale.com>
2558 Date:   Wed Jun 28 10:47:03 2006 -0500
2559
2560     * Switched default PCI speed for 8540 ADS back to 33MHz
2561
2562     * Added comments and a printf to warn that PCI-X won't
2563       work at 33MHz
2564       Patch by Andy Fleming 17-Mar-2006
2565
2566     Signed-off-by: Andy Fleming <afleming@freescale.com>
2567
2568 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
2569 Author: Matthew McClintock <msm@freescale.com>
2570 Date:   Wed Jun 28 10:46:35 2006 -0500
2571
2572     * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
2573
2574     Signed-off-by: Andy Fleming <afleming@freescale.com>
2575
2576 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
2577 Author: Matthew McClintock <msm@freescale.com>
2578 Date:   Wed Jun 28 10:46:13 2006 -0500
2579
2580     * Added VIA configuration table
2581
2582     * Added support for PCI2 on CDS
2583       Patch by Andy Fleming 17-Mar-2006
2584
2585     Signed-off-by: Andy Fleming <afleming@freescale.com>
2586
2587 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
2588 Author: Matthew McClintock <msm@freescale.com>
2589 Date:   Wed Jun 28 10:45:41 2006 -0500
2590
2591     * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
2592
2593     Signed-off-by: Andy Fleming <afleming@freescale.com>
2594
2595 commit 97074ed9655309b64231bc2cee69fe85399f8055
2596 Author: Matthew McClintock <msm@freescale.com>
2597 Date:   Wed Jun 28 10:45:17 2006 -0500
2598
2599     * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
2600
2601     Signed-off-by: Andy Fleming <afleming@freescale.com>
2602
2603 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
2604 Author: Matthew McClintock <msm@freescale.com>
2605 Date:   Wed Jun 28 10:44:49 2006 -0500
2606
2607     * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
2608
2609     Signed-off-by: Andy Fleming <afleming@freescale.com>
2610
2611 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
2612 Author: Matthew McClintock <msm@freescale.com>
2613 Date:   Wed Jun 28 10:44:23 2006 -0500
2614
2615     * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
2616
2617     Signed-off-by: Andy Fleming <afleming@freescale.com>
2618
2619 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
2620 Author: Matthew McClintock <msm@freescale.com>
2621 Date:   Wed Jun 28 10:43:36 2006 -0500
2622
2623     * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
2624
2625     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2626
2627 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
2628 Author: Matthew McClintock <msm@freescale.com>
2629 Date:   Wed Jun 28 10:43:00 2006 -0500
2630
2631     * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
2632
2633 commit 5498d90312aad9f6bdbf047986027c35b03cd163
2634 Author: Matthew McClintock <msm@freescale.com>
2635 Date:   Wed Jun 28 10:42:24 2006 -0500
2636
2637     * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
2638
2639 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
2640 Author: Matthew McClintock <msm@freescale.com>
2641 Date:   Wed Jun 28 10:41:37 2006 -0500
2642
2643     * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
2644
2645 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
2646 Author: John Traill <john.traill@freescale.com>
2647 Date:   Wed Aug 9 14:33:50 2006 +0100
2648
2649     Add Rapidio support for the MPC8641HPCN
2650
2651     Signed-off-by: John Traill <john.traill@freescale.com>
2652
2653 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
2654 Author: John Traill <john.traill@freescale.com>
2655 Date:   Tue Aug 8 11:32:43 2006 +0100
2656
2657     Fix caslat calculation
2658
2659     Signed-off-by: John Traill <john.traill@freescale.com>
2660
2661 commit 709d3073e74153278e7904a70819bbef7df50e1a
2662 Author: Jon Loeliger <jdl@freescale.com>
2663 Date:   Thu Aug 3 16:17:56 2006 -0500
2664
2665     Convert to mac-address in ethernet nodes.
2666
2667 commit 71748af833ca1017edf1415be376366ff2937d17
2668 Author: Haiying Wang <haiying.wang@freescale.com>
2669 Date:   Fri Jul 28 12:41:35 2006 -0400
2670
2671     Correct the irq value of DUART2
2672
2673 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
2674 Author: Haiying Wang <haiying.wang@freescale.com>
2675 Date:   Fri Jul 28 12:41:41 2006 -0400
2676
2677     Change the space size of PEX IO in README
2678
2679 commit 239db37c94f7a92941c4465feceb867c609241c5
2680 Author: Haiying Wang <haiying.wang@freescale.com>
2681 Date:   Fri Jul 28 12:41:18 2006 -0400
2682
2683     Move get_board_sys_clk to board directory
2684
2685 commit 492900b985439fbce1a118afde1e35def870db03
2686 Author: John Traill <john.traill@freescale.com>
2687 Date:   Fri Jul 28 09:03:54 2006 +0100
2688
2689     Fix 8641HPCN pollution
2690
2691 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
2692 Author: John Traill <john.traill@freescale.com>
2693 Date:   Fri Jul 28 08:16:06 2006 +0100
2694
2695     Fix 8641HPCN timebase
2696
2697 commit c86360b830f1eecd7a72208575dde4f57879faea
2698 Author: Zhang Wei <wei.zhang@freescale.com>
2699 Date:   Fri Jul 28 00:01:34 2006 +0800
2700
2701     Fixed OF device tree of mpc86xxhpcn board.
2702
2703     The changes works in with kernel irq mapping rework.
2704
2705     Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2706
2707 commit bea3f28d285942bf3f7ab339ce85178ded544225
2708 Author: Haiying Wang <haiying.wang@freescale.com>
2709 Date:   Wed Jul 12 10:48:05 2006 -0400
2710
2711     Add support for reading and writing mac addresses to or from ID EEPROM.
2712
2713     Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
2714     With attached patch, we can use command "mac/mac read/mac save/"
2715     to read and write EEPROM under u-boot prompt.
2716
2717     U-boot will calculate the checksum of EEPROM while bootup,
2718     if it is right, then u-boot will check whether the mac address
2719     of eTSEC0/1/2/3 is availalbe (non-zero).
2720
2721     If there is mac address availabe in EEPROM, u-boot will use it,
2722     otherewise, u-boot will use the mac address defined in
2723     MPC8641HPCN.h. This matches the requirement to set unique mac address
2724     for each TSEC port.
2725
2726     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
2727     Signed-off-by: York Sun <yorksun@freescale.com>
2728
2729 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
2730 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
2731 Date:   Thu Jul 13 10:35:10 2006 -0500
2732
2733     Fixed initrd issue by define big RAM
2734
2735     Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2736
2737 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
2738 Author: Jason Jin <Jason.jin@freescale.com>
2739 Date:   Fri Jul 7 10:01:45 2006 -0500
2740
2741     We made a u-boot patch to fix the hang up issue
2742     when booting filesystem from ramdisk.
2743
2744     Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2745
2746 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
2747 Author: Matthew McClintock <msm@freescale.com>
2748 Date:   Wed Jun 28 10:47:03 2006 -0500
2749
2750     * Switched default PCI speed for 8540 ADS back to 33MHz
2751     * Added comments and a printf to warn that PCI-X won't
2752       work at 33MHz
2753       Patch by Andy Fleming 17-Mar-2006
2754
2755     Signed-off-by: Andy Fleming <afleming@freescale.com>
2756
2757 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
2758 Author: Matthew McClintock <msm@freescale.com>
2759 Date:   Wed Jun 28 10:46:35 2006 -0500
2760
2761     * Fixed a bug where 8555 PCI code used the old variable and
2762       function names
2763       Patch by Andy Fleming 17-Mar-2006
2764
2765     Signed-off-by: Andy Fleming <afleming@freescale.com>
2766
2767 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
2768 Author: Matthew McClintock <msm@freescale.com>
2769 Date:   Wed Jun 28 10:46:13 2006 -0500
2770
2771     * Added VIA configuration table
2772     * Added support for PCI2 on CDS
2773       Patch by Andy Fleming 17-Mar-2006
2774
2775     Signed-off-by: Andy Fleming <afleming@freescale.com>
2776
2777 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
2778 Author: Matthew McClintock <msm@freescale.com>
2779 Date:   Wed Jun 28 10:45:41 2006 -0500
2780
2781     * Fixed PCI memory definitions
2782       Patch by Andy Fleming 17-Mar-2006
2783
2784     Signed-off-by: Andy Fleming <afleming@freescale.com>
2785
2786 commit 087454609e47295443af793a282cddcd91a5f49c
2787 Author: Matthew McClintock <msm@freescale.com>
2788 Date:   Wed Jun 28 10:45:17 2006 -0500
2789
2790     * Added support for initializing second PCI bus on 85xx
2791       Patch by Andy Fleming 17-Mar-2006
2792
2793     Signed-off-by: Andy Fleming <afleming@freescale.com>
2794
2795 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
2796 Author: Matthew McClintock <msm@freescale.com>
2797 Date:   Wed Jun 28 10:44:49 2006 -0500
2798
2799     * Added PCI-X #defines for PCI-X initialization
2800       Patch by Andy Fleming on 17-Mar-2006
2801
2802     Signed-off-by: Andy Fleming <afleming@freescale.com>
2803
2804 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
2805 Author: Matthew McClintock <msm@freescale.com>
2806 Date:   Wed Jun 28 10:44:23 2006 -0500
2807
2808     * Made sure the code which disables prefetch for PCI devices
2809       sets the size of the prefetch region to 0
2810       Patch by Andy Fleming on 17-Mar-2006
2811
2812     Signed-off-by: Andy Fleming <afleming@freescale.com>
2813
2814 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
2815 Author: Matthew McClintock <msm@freescale.com>
2816 Date:   Wed Jun 28 10:43:36 2006 -0500
2817
2818     * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
2819       Patch by Jon Loeliger 17-Jan-2006
2820
2821     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2822
2823 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
2824 Author: Matthew McClintock <msm@freescale.com>
2825 Date:   Wed Jun 28 10:43:00 2006 -0500
2826
2827     * Removed the oftree.dts for stxxtx in light of the changes
2828       to the flat device tree handling code
2829       Patch by Matthew McClintock 26-June-2006
2830
2831 commit 1b380ec225665e73959677f3893dc658c5925e05
2832 Author: Matthew McClintock <msm@freescale.com>
2833 Date:   Wed Jun 28 10:42:24 2006 -0500
2834
2835     * Patch to modify ft_build.c to update flat device trees in place
2836       Patch by Matthew McClintock 26-June-2006
2837
2838 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
2839 Author: Matthew McClintock <msm@freescale.com>
2840 Date:   Wed Jun 28 10:41:37 2006 -0500
2841
2842     * Modify bootm command to support booting with flat device trees
2843       Patch by Matthew McClintock 26-June-2006
2844
2845 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
2846 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
2847 Date:   Wed Jun 28 08:43:56 2006 -0500
2848
2849     Change Id to symbolic name for RTL8139
2850
2851     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2852
2853 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
2854 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
2855 Date:   Tue Jun 27 18:12:10 2006 +0800
2856
2857     Fix RTL8139 in big endian
2858
2859     signed-off-by: Jason Jin <Jason.Jin@freescale.com>
2860     signed-off-by: Wei Zhang <wei.zhang@freescale.com>
2861
2862 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
2863 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
2864 Date:   Tue Jun 27 18:12:23 2006 +0800
2865
2866     Fix Tsec bug when no link
2867
2868      When tftp a non-exist file from the tftp server, u-boot will check
2869      the link of all eth port. The original file will return wrong link
2870      state on the no link ports.
2871
2872     signed-off-by: Jason Jin <Jason.Jin@freescale.com>
2873
2874 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
2875 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
2876 Date:   Tue Jun 27 18:12:02 2006 +0800
2877
2878     Fix bug for io_bar size during pci scan
2879
2880     During the pci scan process, Some devices return bar_reponse with the
2881     highest bytes 0, such as the pci bridge in uli1575 return bar_response
2882     with 0xffffff, So the bar_size should be manually set under 64K.
2883
2884     Signed-off-by: Jason Jin <jason.jin@freescale.com>
2885
2886 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
2887 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
2888 Date:   Tue Jun 27 18:11:54 2006 +0800
2889
2890     Enable PCIE1 for MPC8641HPCN board
2891
2892     Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2893
2894 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
2895 Author: Jon Loeliger <jdl@freescale.com>
2896 Date:   Thu Jun 22 08:51:46 2006 -0500
2897
2898     Fix bug in 8641hpcn reset command with no args.
2899
2900     Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
2901     Acked-by: Jon Loeliger <jdl@freescale.com>
2902
2903 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
2904 Author: Zhang Wei <wei.zhang@freescale.com>
2905 Date:   Tue Jun 20 17:47:15 2006 +0800
2906
2907     Reworked IRQ mapping in OF-tree.
2908
2909 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
2910 Author: Jon Loeliger <jdl@freescale.com>
2911 Date:   Thu Jun 15 21:33:37 2006 -0500
2912
2913     Do not enable address translation on secondary CPUs.
2914     Do not set up BATs on secondary CPUs.  Let Linux do the nasty.
2915
2916     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2917
2918 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
2919 Author: Jon Loeliger <jdl@jdl.com>
2920 Date:   Wed Jun 7 10:53:55 2006 -0500
2921
2922     Fix a get_board_sys_clk() use-before-def warning.
2923
2924     Signed-off-by: Jon Loeliger <jdl@jdl.com>
2925
2926 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
2927 Author: Jon Loeliger <jdl@jdl.com>
2928 Date:   Wed Jun 7 10:52:49 2006 -0500
2929
2930     Allow DTC path to be passed in.
2931
2932     Signed-off-by: Jon Loeliger <jdl@jdl.com>
2933
2934 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
2935 Author: Haiying Wang <haiying.wang@freescale.com>
2936 Date:   Tue Jun 6 16:54:29 2006 -0400
2937
2938     Modify the IRQ of DUART2
2939
2940 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
2941 Author: Jon Loeliger <jdl@jdl.com>
2942 Date:   Wed May 31 13:55:35 2006 -0500
2943
2944     Review cleanups.
2945
2946     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2947
2948 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
2949 Author: Jon Loeliger <jdl@jdl.com>
2950 Date:   Wed May 31 12:44:44 2006 -0500
2951
2952     White space cleanup.
2953     Some 80-column cleanups.
2954     Convert printf() to puts() where possible.
2955     Use #include "spd_sdram.h" as needed.
2956     Enhanced reset command usage message a bit.
2957
2958     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2959
2960 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
2961 Author: Jon Loeliger <jdl@jdl.com>
2962 Date:   Wed May 31 11:39:34 2006 -0500
2963
2964     Removed unneeded local_bus_init() from 8641HPCN board.
2965
2966     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2967
2968 commit 4d3d729c16c392d2982d3266b659d333c927697d
2969 Author: Jon Loeliger <jdl@jdl.com>
2970 Date:   Wed May 31 11:24:28 2006 -0500
2971
2972     Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
2973
2974     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2975
2976 commit b2a941de060350ad15878d8219825f4950e9bb8e
2977 Author: Jon Loeliger <jdl@jdl.com>
2978 Date:   Wed May 31 10:07:28 2006 -0500
2979
2980     Remove dead debug code.
2981
2982     Signed-off-by: Jon Loeliger <jdl@jdl.com>
2983
2984 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
2985 Author: Jon Loeliger <jdl@freescale.com>
2986 Date:   Tue May 30 17:47:00 2006 -0500
2987
2988     Move mpc86xx PIXIS code to board directory
2989
2990     First cut at moving the PIXIS platform code out of
2991     the 86xx cpu directory and into board/mpc8641hpcn
2992     where it belongs.
2993
2994     Signed-off-by: Jon Loeliger <jdl@freescale.com>
2995
2996 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
2997 Author: Haiying Wang <Haiying.Wang@freescale.com>
2998 Date:   Tue May 30 09:10:32 2006 -0500
2999
3000     Improve "reset" command's interaction with watchdog.
3001
3002         "reset altbank" will reset another bank WITHOUT watch dog timer enabled
3003         "reset altbank wd" will reset another bank WITH watch dog enabled
3004         "diswd" will disable watch dog after u-boot boots up successfully
3005
3006     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
3007
3008 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
3009 Author: Haiying Wang <Haiying.Wang@freescale.com>
3010 Date:   Tue May 30 08:51:19 2006 -0500
3011
3012     Fix two SDRAM setup bugs.
3013
3014         Fix ECC setup bug.
3015         Enable 1T/2T based on number of DIMMs present.
3016
3017     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
3018
3019 commit d11fec5015334deb2010e36ce00bb118cc5429a5
3020 Author: Haiying Wang <Haiying.Wang@freescale.com>
3021 Date:   Fri May 26 10:24:48 2006 -0500
3022
3023     Add first draft of the MPC8641HPCN doc/README.
3024
3025     Signed-off-by: Jon Loeliger <jdl@jdl.com>
3026
3027 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
3028 Author: Haiying Wang <Haiying.Wang@freescale.com>
3029 Date:   Fri May 26 10:13:04 2006 -0500
3030
3031     Added pci@8000 block.
3032     Updated ethernet interrupt mappings (moved up 48).
3033     Cleaned up a few comments.
3034
3035     Signed-off-by: Jon Loeliger <jdl@jdl.com>
3036
3037 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
3038 Author: Haiying Wang <Haiying.Wang@freescale.com>
3039 Date:   Fri May 26 10:01:16 2006 -0500
3040
3041     Allow args on reset command.
3042
3043     Signed-off-by: Jon Loeliger <jdl@jdl.com>
3044
3045 commit 14e37081ff3cac7ebe6e93836523429853b6b292
3046 Author: Jon Loeliger <jdl@jdl.com>
3047 Date:   Fri May 19 13:28:39 2006 -0500
3048
3049     Change arbitration to round-robin for SMP linux.
3050
3051 commit 9a655876e5995be80f49054e2509500e871e4d3a
3052 Author: Jon Loeliger <jdl@jdl.com>
3053 Date:   Fri May 19 13:26:34 2006 -0500
3054
3055     Enable dual DDR controllers and interleaving.
3056
3057 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
3058 Author: Jon Loeliger <jdl@jdl.com>
3059 Date:   Fri May 19 13:22:44 2006 -0500
3060
3061     Update 86xx address map and LAWBARs.
3062
3063 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
3064 Author: Jon Loeliger <jdl@jdl.com>
3065 Date:   Fri May 19 13:14:15 2006 -0500
3066
3067     Remove L2 Cache invalidate polling.
3068
3069 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
3070 Author: Jon Loeliger <jdl@jdl.com>
3071 Date:   Fri May 19 12:33:09 2006 -0500
3072
3073     Enable 2nd CPU and I2C.
3074
3075 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
3076 Author: Jon Loeliger <jdl@freescale.com>
3077 Date:   Mon May 15 07:26:56 2006 -0500
3078
3079     Update interrupt mapping.
3080
3081 commit 6cfea33477b04b63ed47386ed1629529484c33ba
3082 Author: Haiying Wang <Haiying.Wang@freescale.com>
3083 Date:   Wed May 10 09:38:06 2006 -0500
3084
3085     Remove unneeded INIT_RAM_LOCK cache twiddling.
3086     Correctly tracks r29 as global data pointer now.
3087
3088     Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
3089
3090 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
3091 Author: Jon Loeliger <jdl@freescale.com>
3092 Date:   Wed May 10 09:33:07 2006 -0500
3093
3094     Remove unnecessary flash.c file.
3095
3096 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
3097 Author: Jon Loeliger <jdl@freescale.com>
3098 Date:   Tue May 9 08:23:49 2006 -0500
3099
3100     Get MPC8641HPCN flash images working.
3101
3102         Enable the CFI driver.
3103         Remove bogus LAWBAR7 cruft.
3104         Use correct TEXT_BASE, Fixup load script.
3105         Enable SPD EEPROM during DDR setup.
3106         Use generic RFC 1918 IP addresses by default.
3107
3108 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
3109 Author: Jon Loeliger <jdl@freescale.com>
3110 Date:   Thu Apr 27 10:15:16 2006 -0500
3111
3112     Cleanup whitespaces and style issues.
3113     Removed //-style comments.
3114     Use 80-column lines.
3115     Remove trailing whitespace.
3116     Remove dead code and debug cruft.
3117
3118 commit a2320a6bf8113a09544c42d160d10ac69d049a03
3119 Author: Jon Loeliger <jdl@freescale.com>
3120 Date:   Thu Apr 27 08:22:39 2006 -0500
3121
3122     Revert bad PCI prefetch limit change.
3123
3124 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
3125 Author: Jon Loeliger <jdl@freescale.com>
3126 Date:   Wed Apr 26 17:58:56 2006 -0500
3127
3128     Initial support for MPC8641 HPCN board.