MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5 #
   6 # SPDX-License-Identifier:      GPL-2.0+
   7
   8 usage()
   9 {
  10         # if exiting with 0, write to stdout, else write to stderr
  11         local ret=${1:-0}
  12         [ "${ret}" -eq 1 ] && exec 1>&2
  13         cat <<-EOF
  14         Usage: MAKEALL [options] [--] [boards-to-build]
  15
  16         Options:
  17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  20           -s SOC,    --soc SOC         Build all boards with soc SOC
  21           -l,        --list            List all targets to be built
  22           -m,        --maintainers     List all targets and maintainer email
  23           -M,        --mails           List all targets and all affilated emails
  24           -C,        --check           Enable build checking
  25           -n,        --continue        Continue (skip boards already built)
  26           -r,        --rebuild-errors  Rebuild any boards that errored
  27           -h,        --help            This help output
  28
  29         Selections by these options are logically ANDed; if the same option
  30         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  31         will select all configurations where the vendor is either FOO or
  32         BAR.  Any additional arguments specified on the command line are
  33         always build additionally.  See the boards.cfg file for more info.
  34
  35         If no boards are specified, then the default is "powerpc".
  36
  37         Environment variables:
  38           BUILD_NCPUS      number of parallel make jobs (default: auto)
  39           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  40           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  41                            architecture "ARCH".  Substitute "ARCH" for any
  42                            supported architecture (default: "")
  43           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  44           BUILD_DIR        output build directory (default: ./)
  45           BUILD_NBUILDS    number of parallel targets (default: 1)
  46
  47         Examples:
  48           - build all Power Architecture boards:
  49               MAKEALL -a powerpc
  50               MAKEALL --arch powerpc
  51               MAKEALL powerpc
  52           - build all PowerPC boards manufactured by vendor "esd":
  53               MAKEALL -a powerpc -v esd
  54           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  55               MAKEALL -a powerpc -v keymile -v siemens
  56           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  57               MAKEALL -c mpc83xx -v freescale 4xx
  58         EOF
  59         exit ${ret}
  60 }
  61
  62 SHORT_OPTS="ha:c:v:s:lmMCnr"
  63 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
  64
  65 # Option processing based on util-linux-2.13/getopt-parse.bash
  66
  67 # Note that we use `"$@"' to let each command-line parameter expand to a
  68 # separate word. The quotes around `$@' are essential!
  69 # We need TEMP as the `eval set --' would nuke the return value of
  70 # getopt.
  71 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  72      -n 'MAKEALL' -- "$@"`
  73
  74 [ $? != 0 ] && usage 1
  75
  76 # Note the quotes around `$TEMP': they are essential!
  77 eval set -- "$TEMP"
  78
  79 SELECTED=''
  80 ONLY_LIST=''
  81 PRINT_MAINTS=''
  82 MAINTAINERS_ONLY=''
  83 CONTINUE=''
  84 REBUILD_ERRORS=''
  85
  86 while true ; do
  87         case "$1" in
  88         -a|--arch)
  89                 # echo "Option ARCH: argument \`$2'"
  90                 if [ "$opt_a" ] ; then
  91                         opt_a="${opt_a%)} || \$2 == \"$2\")"
  92                 else
  93                         opt_a="(\$2 == \"$2\")"
  94                 fi
  95                 SELECTED='y'
  96                 shift 2 ;;
  97         -c|--cpu)
  98                 # echo "Option CPU: argument \`$2'"
  99                 if [ "$opt_c" ] ; then
 100                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
 101                 else
 102                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 103                 fi
 104                 SELECTED='y'
 105                 shift 2 ;;
 106         -s|--soc)
 107                 # echo "Option SoC: argument \`$2'"
 108                 if [ "$opt_s" ] ; then
 109                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 110                 else
 111                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 112                 fi
 113                 SELECTED='y'
 114                 shift 2 ;;
 115         -v|--vendor)
 116                 # echo "Option VENDOR: argument \`$2'"
 117                 if [ "$opt_v" ] ; then
 118                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 119                 else
 120                         opt_v="(\$5 == \"$2\")"
 121                 fi
 122                 SELECTED='y'
 123                 shift 2 ;;
 124         -C|--check)
 125                 CHECK='C=1'
 126                 shift ;;
 127         -n|--continue)
 128                 CONTINUE='y'
 129                 shift ;;
 130         -r|--rebuild-errors)
 131                 REBUILD_ERRORS='y'
 132                 shift ;;
 133         -l|--list)
 134                 ONLY_LIST='y'
 135                 shift ;;
 136         -m|--maintainers)
 137                 ONLY_LIST='y'
 138                 PRINT_MAINTS='y'
 139                 MAINTAINERS_ONLY='y'
 140                 shift ;;
 141         -M|--mails)
 142                 ONLY_LIST='y'
 143                 PRINT_MAINTS='y'
 144                 shift ;;
 145         -h|--help)
 146                 usage ;;
 147         --)
 148                 shift ; break ;;
 149         *)
 150                 echo "Internal error!" >&2 ; exit 1 ;;
 151         esac
 152 done
 153 # echo "Remaining arguments:"
 154 # for arg do echo '--> '"\`$arg'" ; done
 155
 156 FILTER="\$1 !~ /^#/"
 157 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 158 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 159 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 160 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 161
 162 if [ "$SELECTED" ] ; then
 163         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 164
 165         # Make sure some boards from boards.cfg are actually found
 166         if [ -z "$SELECTED" ] ; then
 167                 echo "Error: No boards selected, invalid arguments"
 168                 exit 1
 169         fi
 170 fi
 171
 172 #########################################################################
 173
 174 # Print statistics when we exit
 175 trap exit 1 2 3 15
 176 trap print_stats 0
 177
 178 # Determine number of CPU cores if no default was set
 179 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 180
 181 if [ "$BUILD_NCPUS" -gt 1 ]
 182 then
 183         JOBS="-j $((BUILD_NCPUS + 1))"
 184 else
 185         JOBS=""
 186 fi
 187
 188 if [ "${MAKEALL_LOGDIR}" ] ; then
 189         LOG_DIR=${MAKEALL_LOGDIR}
 190 else
 191         LOG_DIR="LOG"
 192 fi
 193
 194 : ${BUILD_NBUILDS:=1}
 195 BUILD_MANY=0
 196
 197 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 198         BUILD_MANY=1
 199         : ${BUILD_DIR:=./build}
 200         mkdir -p "${BUILD_DIR}/ERR"
 201         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 202 fi
 203
 204 : ${BUILD_DIR:=.}
 205
 206 OUTPUT_PREFIX="${BUILD_DIR}"
 207
 208 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 209 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 210         find "${LOG_DIR}/" -type f -exec rm -f {} +
 211 fi
 212
 213 LIST=""
 214
 215 # Keep track of the number of builds and errors
 216 ERR_CNT=0
 217 ERR_LIST=""
 218 WRN_CNT=0
 219 WRN_LIST=""
 220 TOTAL_CNT=0
 221 SKIP_CNT=0
 222 CURRENT_CNT=0
 223 OLDEST_IDX=1
 224 RC=0
 225
 226 # Helper funcs for parsing boards.cfg
 227 targets_by_field()
 228 {
 229         field=$1
 230         regexp=$2
 231
 232         awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
 233                                                                 boards.cfg
 234 }
 235
 236 targets_by_arch() { targets_by_field 2 "$@" ; }
 237 targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
 238 targets_by_soc()  { targets_by_field 4 "$@" ; }
 239
 240 #########################################################################
 241 ## MPC5xx Systems
 242 #########################################################################
 243
 244 LIST_5xx="$(targets_by_cpu mpc5xx)"
 245
 246 #########################################################################
 247 ## MPC5xxx Systems
 248 #########################################################################
 249
 250 LIST_5xxx="$(targets_by_cpu mpc5xxx)"
 251
 252 #########################################################################
 253 ## MPC512x Systems
 254 #########################################################################
 255
 256 LIST_512x="$(targets_by_cpu mpc512x)"
 257
 258 #########################################################################
 259 ## MPC8xx Systems
 260 #########################################################################
 261
 262 LIST_8xx="$(targets_by_cpu mpc8xx)"
 263
 264 #########################################################################
 265 ## PPC4xx Systems
 266 #########################################################################
 267
 268 LIST_4xx="$(targets_by_cpu ppc4xx)"
 269
 270 #########################################################################
 271 ## MPC824x Systems
 272 #########################################################################
 273
 274 LIST_824x="$(targets_by_cpu mpc824x)"
 275
 276 #########################################################################
 277 ## MPC8260 Systems (includes 8250, 8255 etc.)
 278 #########################################################################
 279
 280 LIST_8260="$(targets_by_cpu mpc8260)"
 281
 282 #########################################################################
 283 ## MPC83xx Systems (includes 8349, etc.)
 284 #########################################################################
 285
 286 LIST_83xx="$(targets_by_cpu mpc83xx)"
 287
 288 #########################################################################
 289 ## MPC85xx Systems (includes 8540, 8560 etc.)
 290 #########################################################################
 291
 292 LIST_85xx="$(targets_by_cpu mpc85xx)"
 293
 294 #########################################################################
 295 ## MPC86xx Systems
 296 #########################################################################
 297
 298 LIST_86xx="$(targets_by_cpu mpc86xx)"
 299
 300 #########################################################################
 301 ## 74xx/7xx Systems
 302 #########################################################################
 303
 304 LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
 305
 306 #########################################################################
 307 ## PowerPC groups
 308 #########################################################################
 309
 310 LIST_TSEC="             \
 311         ${LIST_83xx}    \
 312         ${LIST_85xx}    \
 313         ${LIST_86xx}    \
 314 "
 315
 316 LIST_powerpc="          \
 317         ${LIST_5xx}     \
 318         ${LIST_512x}    \
 319         ${LIST_5xxx}    \
 320         ${LIST_8xx}     \
 321         ${LIST_824x}    \
 322         ${LIST_8260}    \
 323         ${LIST_83xx}    \
 324         ${LIST_85xx}    \
 325         ${LIST_86xx}    \
 326         ${LIST_4xx}     \
 327         ${LIST_74xx_7xx}\
 328 "
 329
 330 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 331 # still using "ppc" instead of "powerpc"
 332 LIST_ppc="              \
 333         ${LIST_powerpc} \
 334 "
 335
 336 #########################################################################
 337 ## StrongARM Systems
 338 #########################################################################
 339
 340 LIST_SA="$(targets_by_cpu sa1100)"
 341
 342 #########################################################################
 343 ## ARM7 Systems
 344 #########################################################################
 345
 346 LIST_ARM7="$(targets_by_cpu arm720t)"
 347
 348 #########################################################################
 349 ## ARM9 Systems
 350 #########################################################################
 351
 352 LIST_ARM9="$(targets_by_cpu arm920t)    \
 353         $(targets_by_cpu arm926ejs)     \
 354         $(targets_by_cpu arm946es)      \
 355 "
 356
 357 #########################################################################
 358 ## ARM11 Systems
 359 #########################################################################
 360 LIST_ARM11="$(targets_by_cpu arm1136)   \
 361         $(targets_by_cpu arm1176)       \
 362 "
 363
 364 #########################################################################
 365 ## ARMV7 Systems
 366 #########################################################################
 367
 368 LIST_ARMV7="$(targets_by_cpu armv7)"
 369
 370 #########################################################################
 371 ## AT91 Systems
 372 #########################################################################
 373
 374 LIST_at91="$(targets_by_soc at91)"
 375
 376 #########################################################################
 377 ## Xscale Systems
 378 #########################################################################
 379
 380 LIST_pxa="$(targets_by_cpu pxa)"
 381
 382 LIST_ixp="$(targets_by_cpu ixp)"
 383
 384 #########################################################################
 385 ## SPEAr Systems
 386 #########################################################################
 387
 388 LIST_spear="$(targets_by_soc spear)"
 389
 390 #########################################################################
 391 ## ARM groups
 392 #########################################################################
 393
 394 LIST_arm="$(targets_by_arch arm)"
 395
 396 #########################################################################
 397 ## MIPS Systems         (default = big endian)
 398 #########################################################################
 399
 400 LIST_mips4kc="          \
 401         incaip          \
 402         incaip_100MHz   \
 403         incaip_133MHz   \
 404         incaip_150MHz   \
 405         qemu_mips       \
 406         vct_platinum    \
 407         vct_platinum_small      \
 408         vct_platinum_onenand    \
 409         vct_platinum_onenand_small      \
 410         vct_platinumavc \
 411         vct_platinumavc_small   \
 412         vct_platinumavc_onenand \
 413         vct_platinumavc_onenand_small   \
 414         vct_premium     \
 415         vct_premium_small       \
 416         vct_premium_onenand     \
 417         vct_premium_onenand_small       \
 418 "
 419
 420 LIST_au1xx0="           \
 421         dbau1000        \
 422         dbau1100        \
 423         dbau1500        \
 424         dbau1550        \
 425 "
 426
 427 LIST_mips="             \
 428         ${LIST_mips4kc} \
 429         ${LIST_mips5kc} \
 430         ${LIST_au1xx0}  \
 431 "
 432
 433 #########################################################################
 434 ## MIPS Systems         (little endian)
 435 #########################################################################
 436
 437 LIST_au1xx0_el="        \
 438         dbau1550_el     \
 439         pb1000          \
 440 "
 441 LIST_mips_el="                  \
 442         ${LIST_au1xx0_el}       \
 443 "
 444 #########################################################################
 445 ## OpenRISC Systems
 446 #########################################################################
 447
 448 LIST_openrisc="$(targets_by_arch openrisc)"
 449
 450 #########################################################################
 451 ## x86 Systems
 452 #########################################################################
 453
 454 LIST_x86="$(targets_by_arch x86)"
 455
 456 #########################################################################
 457 ## Nios-II Systems
 458 #########################################################################
 459
 460 LIST_nios2="$(targets_by_arch nios2)"
 461
 462 #########################################################################
 463 ## MicroBlaze Systems
 464 #########################################################################
 465
 466 LIST_microblaze="$(targets_by_arch microblaze)"
 467
 468 #########################################################################
 469 ## ColdFire Systems
 470 #########################################################################
 471
 472 LIST_m68k="$(targets_by_arch m68k)"
 473 LIST_coldfire=${LIST_m68k}
 474
 475 #########################################################################
 476 ## AVR32 Systems
 477 #########################################################################
 478
 479 LIST_avr32="$(targets_by_arch avr32)"
 480
 481 #########################################################################
 482 ## Blackfin Systems
 483 #########################################################################
 484
 485 LIST_blackfin="$(targets_by_arch blackfin)"
 486
 487 #########################################################################
 488 ## SH Systems
 489 #########################################################################
 490
 491 LIST_sh2="$(targets_by_cpu sh2)"
 492 LIST_sh3="$(targets_by_cpu sh3)"
 493 LIST_sh4="$(targets_by_cpu sh4)"
 494
 495 LIST_sh="$(targets_by_arch sh)"
 496
 497 #########################################################################
 498 ## SPARC Systems
 499 #########################################################################
 500
 501 LIST_sparc="$(targets_by_arch sparc)"
 502
 503 #########################################################################
 504 ## NDS32 Systems
 505 #########################################################################
 506
 507 LIST_nds32="$(targets_by_arch nds32)"
 508
 509 #-----------------------------------------------------------------------
 510
 511 get_target_location() {
 512         local target=$1
 513         local BOARD_NAME=""
 514         local CONFIG_NAME=""
 515         local board=""
 516         local vendor=""
 517
 518         # Automatic mode
 519         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 520         if [ -z "${line}" ] ; then echo "" ; return ; fi
 521
 522         set ${line}
 523
 524         CONFIG_NAME="${7%_config}"
 525
 526         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 527
 528         if [ $# -gt 5 ]; then
 529                 if [ "$6" = "-" ] ; then
 530                         board=${BOARD_NAME}
 531                 else
 532                         board="$6"
 533                 fi
 534         fi
 535
 536         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 537         [ $# -gt 6 ] && [ "$8" != "-" ] && {
 538                 tmp="${8%:*}"
 539                 if [ "$tmp" ] ; then
 540                         CONFIG_NAME="$tmp"
 541                 fi
 542         }
 543
 544         # Assign board directory to BOARDIR variable
 545         if [ "${vendor}" == "-" ] ; then
 546             BOARDDIR=${board}
 547         else
 548             BOARDDIR=${vendor}/${board}
 549         fi
 550
 551         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 552 }
 553
 554 get_target_maintainers() {
 555         local name=`echo $1 | cut -d : -f 3`
 556
 557         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 558         if [ -z "${line}" ]; then
 559                 echo ""
 560                 return ;
 561         fi
 562
 563         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
 564         [ "$mails" == "-" ] && mails=""
 565         echo "$mails"
 566 }
 567
 568 get_target_arch() {
 569         local target=$1
 570
 571         # Automatic mode
 572         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 573
 574         if [ -z "${line}" ] ; then echo "" ; return ; fi
 575
 576         set ${line}
 577         echo "$2"
 578 }
 579
 580 list_target() {
 581         if [ "$PRINT_MAINTS" != 'y' ] ; then
 582                 echo "$1"
 583                 return
 584         fi
 585
 586         echo -n "$1:"
 587
 588         local loc=`get_target_location $1`
 589
 590         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 591
 592         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 593
 594         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 595
 596                 local dir=`echo ${loc} | cut -d ":" -f 2`
 597                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 598                 local git_result=`git log --format=%aE board/${dir} \
 599                                 include/configs/${cfg}.h | grep "@"`
 600                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 601                                                 head -n 3`
 602                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 603                         sort | uniq -c | sort -nr | head -n 3 | \
 604                         sed "s/^ \+[0-9]\+ \+//"`
 605
 606                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 607                         sort -u | tr "\n" " " | sed "s/ $//" ;
 608         else
 609                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 610                                                 sed "s/ $//" ;
 611         fi
 612
 613         echo ""
 614 }
 615
 616 # Each finished build will have a file called ${donep}${n},
 617 # where n is the index of the build. Each build
 618 # we've already noted as finished will have ${skipp}${n}.
 619 # The code managing the build process will use this information
 620 # to ensure that only BUILD_NBUILDS builds are in flight at once
 621 donep="${LOG_DIR}/._done_"
 622 skipp="${LOG_DIR}/._skip_"
 623
 624 build_target_killed() {
 625         echo "Aborted $target build."
 626         # Remove the logs for this board since it was aborted
 627         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 628         exit
 629 }
 630
 631 build_target() {
 632         target=$1
 633         build_idx=$2
 634
 635         if [ "$ONLY_LIST" == 'y' ] ; then
 636                 list_target ${target}
 637                 return
 638         fi
 639
 640         if [ $BUILD_MANY == 1 ] ; then
 641                 output_dir="${OUTPUT_PREFIX}/${target}"
 642                 mkdir -p "${output_dir}"
 643                 trap build_target_killed TERM
 644         else
 645                 output_dir="${OUTPUT_PREFIX}"
 646         fi
 647
 648         export BUILD_DIR="${output_dir}"
 649
 650         target_arch=$(get_target_arch ${target})
 651         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 652         if [ "${cross_toolchain}" ] ; then
 653             MAKE="make CROSS_COMPILE=${cross_toolchain}"
 654         elif [ "${CROSS_COMPILE}" ] ; then
 655             MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
 656         else
 657             MAKE=make
 658         fi
 659
 660         ${MAKE} distclean >/dev/null
 661         ${MAKE} -s ${target}_config
 662
 663         ${MAKE} ${JOBS} ${CHECK} all \
 664                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 665
 666         # Check for 'make' errors
 667         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 668                 RC=1
 669         fi
 670
 671         if [ $BUILD_MANY == 1 ] ; then
 672                 trap - TERM
 673
 674                 ${MAKE} -s tidy
 675
 676                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 677                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 678                 else
 679                         rm ${LOG_DIR}/${target}.ERR
 680                 fi
 681         else
 682                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 683                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 684                                 : $(( ERR_CNT += 1 ))
 685                                 ERR_LIST="${ERR_LIST} $target"
 686                         else
 687                                 : $(( WRN_CNT += 1 ))
 688                                 WRN_LIST="${WRN_LIST} $target"
 689                         fi
 690                 else
 691                         rm ${LOG_DIR}/${target}.ERR
 692                 fi
 693         fi
 694
 695         OBJS=${output_dir}/u-boot
 696         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 697                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 698         fi
 699
 700         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 701
 702         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 703
 704         touch "${donep}${build_idx}"
 705 }
 706
 707 manage_builds() {
 708         search_idx=${OLDEST_IDX}
 709         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 710
 711         while true; do
 712                 if [ -e "${donep}${search_idx}" ] ; then
 713                         : $(( CURRENT_CNT-- ))
 714                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 715                                 : $(( OLDEST_IDX++ ))
 716
 717                         # Only want to count it once
 718                         rm -f "${donep}${search_idx}"
 719                         touch "${skipp}${search_idx}"
 720                 elif [ -e "${skipp}${search_idx}" ] ; then
 721                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 722                                 : $(( OLDEST_IDX++ ))
 723                 fi
 724                 : $(( search_idx++ ))
 725                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 726                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 727                                 search_idx=${OLDEST_IDX}
 728                                 sleep 1
 729                         else
 730                                 break
 731                         fi
 732                 fi
 733         done
 734 }
 735
 736 build_targets() {
 737         for t in "$@" ; do
 738                 # If a LIST_xxx var exists, use it.  But avoid variable
 739                 # expansion in the eval when a board name contains certain
 740                 # characters that the shell interprets.
 741                 case ${t} in
 742                         *[-+=]*) list= ;;
 743                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 744                 esac
 745                 if [ -n "${list}" ] ; then
 746                         build_targets ${list}
 747                 else
 748                         : $((TOTAL_CNT += 1))
 749                         : $((CURRENT_CNT += 1))
 750                         rm -f "${donep}${TOTAL_CNT}"
 751                         rm -f "${skipp}${TOTAL_CNT}"
 752                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 753                                 : $((SKIP_CNT += 1))
 754                                 touch "${donep}${TOTAL_CNT}"
 755                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 756                                 : $((SKIP_CNT += 1))
 757                                 touch "${donep}${TOTAL_CNT}"
 758                         else
 759                                 if [ $BUILD_MANY == 1 ] ; then
 760                                         build_target ${t} ${TOTAL_CNT} &
 761                                 else
 762                                         CUR_TGT="${t}"
 763                                         build_target ${t} ${TOTAL_CNT}
 764                                         CUR_TGT=''
 765                                 fi
 766                         fi
 767                 fi
 768
 769                 # We maintain a running count of all the builds we have done.
 770                 # Each finished build will have a file called ${donep}${n},
 771                 # where n is the index of the build. Each build
 772                 # we've already noted as finished will have ${skipp}${n}.
 773                 # We track the current index via TOTAL_CNT, and the oldest
 774                 # index. When we exceed the maximum number of parallel builds,
 775                 # We look from oldest to current for builds that have completed,
 776                 # and update the current count and oldest index as appropriate.
 777                 # If we've gone through the entire list, wait a second, and
 778                 # reprocess the entire list until we find a build that has
 779                 # completed
 780                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 781                         manage_builds
 782                 fi
 783         done
 784 }
 785
 786 #-----------------------------------------------------------------------
 787
 788 kill_children() {
 789         local OS=$(uname -s)
 790         local children=""
 791         case "${OS}" in
 792                 "Darwin")
 793                         # Mac OS X is known to have BSD style ps
 794                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 795                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 796                         ;;
 797                 *)
 798                         # everything else tries the GNU style
 799                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 800                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 801                         ;;
 802         esac
 803
 804         kill $children 2> /dev/null
 805         wait $children 2> /dev/null
 806
 807         exit
 808 }
 809
 810 print_stats() {
 811         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 812
 813         # Only count boards that completed
 814         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 815
 816         rm -f ${donep}* ${skipp}*
 817
 818         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 819                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 820                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 821                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 822                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 823                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 824                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 825         else
 826                 # Remove the logs for any board that was interrupted
 827                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 828         fi
 829
 830         : $((TOTAL_CNT -= ${SKIP_CNT}))
 831         echo ""
 832         echo "--------------------- SUMMARY ----------------------------"
 833         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 834                 echo "Boards skipped: ${SKIP_CNT}"
 835         fi
 836         echo "Boards compiled: ${TOTAL_CNT}"
 837         if [ ${ERR_CNT} -gt 0 ] ; then
 838                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 839         fi
 840         if [ ${WRN_CNT} -gt 0 ] ; then
 841                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 842         fi
 843         echo "----------------------------------------------------------"
 844
 845         if [ $BUILD_MANY == 1 ] ; then
 846                 kill_children
 847         fi
 848
 849         exit $RC
 850 }
 851
 852 #-----------------------------------------------------------------------
 853
 854 # Build target groups selected by options, plus any command line args
 855 set -- ${SELECTED} "$@"
 856 # run PowerPC by default
 857 [ $# = 0 ] && set -- powerpc
 858 build_targets "$@"
 859 wait