2 # (C) Copyright 2000-2005
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 # See file CREDITS for list of people who contributed to this
8 # This program is free software; you can redistribute it and/or
9 # modify it under the terms of the GNU General Public License as
10 # published by the Free Software Foundation; either version 2 of
11 # the License, or (at your option) any later version.
13 # This program is distributed in the hope that it will be useful,
14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 # GNU General Public License for more details.
18 # You should have received a copy of the GNU General Public License
19 # along with this program; if not, write to the Free Software
20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 HOSTARCH
:= $(shell uname
-m | \
32 HOSTOS
:= $(shell uname
-s | tr
'[:upper:]' '[:lower:]' | \
33 sed
-e
's/\(cygwin\).*/cygwin/')
35 export HOSTARCH HOSTOS
37 # Deal with colliding definitions from tcsh etc.
40 #########################################################################
42 TOPDIR
:= $(shell if
[ "$$PWD" != "" ]; then echo
$$PWD; else pwd
; fi
)
45 ifeq (include/config.mk
,$(wildcard include/config.mk
))
46 # load ARCH, BOARD, and CPU configuration
47 include include/config.mk
48 export ARCH CPU BOARD VENDOR SOC
49 # load other configuration
50 include $(TOPDIR
)/config.mk
53 ifeq ($(HOSTARCH
),ppc
)
57 CROSS_COMPILE
= powerpc-linux-
60 CROSS_COMPILE
= arm-linux-
63 ifeq ($(HOSTARCH
),i386
)
66 CROSS_COMPILE
= i386-linux-
70 CROSS_COMPILE
= mips_4KC-
73 CROSS_COMPILE
= nios-elf-
76 CROSS_COMPILE
= nios2-elf-
79 CROSS_COMPILE
= m68k-elf-
81 ifeq ($(ARCH
),microblaze
)
89 #########################################################################
90 # U-Boot objects....order is important (i.e. start must be first)
92 OBJS
= cpu
/$(CPU
)/start.o
94 OBJS
+= cpu
/$(CPU
)/start16.o
95 OBJS
+= cpu
/$(CPU
)/reset.o
98 OBJS
+= cpu
/$(CPU
)/resetvec.o
100 ifeq ($(CPU
),mpc83xx
)
101 OBJS
+= cpu
/$(CPU
)/resetvec.o
103 ifeq ($(CPU
),mpc85xx
)
104 OBJS
+= cpu
/$(CPU
)/resetvec.o
107 LIBS
= lib_generic
/libgeneric.a
108 LIBS
+= board
/$(BOARDDIR
)/lib
$(BOARD
).a
109 LIBS
+= cpu
/$(CPU
)/lib
$(CPU
).a
111 LIBS
+= cpu
/$(CPU
)/$(SOC
)/lib
$(SOC
).a
113 LIBS
+= lib_
$(ARCH
)/lib
$(ARCH
).a
114 LIBS
+= fs
/cramfs
/libcramfs.a fs
/fat
/libfat.a fs
/fdos
/libfdos.a fs
/jffs2
/libjffs2.a \
115 fs
/reiserfs
/libreiserfs.a fs
/ext2
/libext2fs.a
117 LIBS
+= disk
/libdisk.a
120 LIBS
+= drivers
/libdrivers.a
121 LIBS
+= drivers
/sk98lin
/libsk98lin.a
122 LIBS
+= post
/libpost.a post
/cpu
/libcpu.a
123 LIBS
+= common
/libcommon.a
127 PLATFORM_LIBS
+= -L
$(shell dirname
`$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
130 # The "tools" are needed early, so put this first
131 # Don't include stuff already done in $(LIBS)
138 #########################################################################
139 #########################################################################
141 ALL
= u-boot.srec u-boot.bin System.map
146 $(OBJCOPY
) ${OBJCFLAGS} -O ihex
$< $@
149 $(OBJCOPY
) ${OBJCFLAGS} -O srec
$< $@
152 $(OBJCOPY
) ${OBJCFLAGS} -O binary
$< $@
154 u-boot.img
: u-boot.bin
155 .
/tools
/mkimage
-A
$(ARCH
) -T firmware
-C none \
156 -a
$(TEXT_BASE
) -e
0 \
157 -n
$(shell sed
-n
-e
's/.*U_BOOT_VERSION//p' include/version.h | \
158 sed
-e
's/"[ ]*$$/ for $(BOARD) board"/') \
162 $(OBJDUMP
) -d
$< > $@
164 u-boot
: depend
$(SUBDIRS
) $(OBJS
) $(LIBS
) $(LDSCRIPT
)
165 UNDEF_SYM
=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
166 $(LD
) $(LDFLAGS
) $$UNDEF_SYM $(OBJS
) \
167 --start-group
$(LIBS
) --end-group
$(PLATFORM_LIBS
) \
168 -Map u-boot.map
-o u-boot
171 $(MAKE
) -C
`dirname $@`
177 $(MAKE
) -C tools
/gdb || exit
1
180 @for
dir in
$(SUBDIRS
) ; do
$(MAKE
) -C
$$dir .depend
; done
183 ctags
-w
`find $(SUBDIRS) include \
184 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
185 fs/cramfs fs/fat fs/fdos fs/jffs2 \
186 net disk rtc dtt drivers drivers/sk98lin common \
187 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
190 etags
-a
`find $(SUBDIRS) include \
191 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
192 fs/cramfs fs/fat fs/fdos fs/jffs2 \
193 net disk rtc dtt drivers drivers/sk98lin common \
194 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
198 grep
-v
'\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
201 #########################################################################
203 all install u-boot u-boot.srec depend dep
:
204 @echo
"System not configured - see README" >&2
208 #########################################################################
211 @
rm -f
include/config.h
include/config.mk board
/*/config.tmp
213 #========================================================================
215 #========================================================================
217 #########################################################################
219 #########################################################################
221 canmb_config
: unconfig
222 @.
/mkconfig
-a canmb ppc mpc5xxx canmb
224 cmi_mpc5xx_config
: unconfig
225 @.
/mkconfig
$(@
:_config
=) ppc mpc5xx cmi
227 PATI_config
: unconfig
228 @.
/mkconfig
$(@
:_config
=) ppc mpc5xx pati mpl
230 #########################################################################
232 #########################################################################
235 @.
/mkconfig
-a aev ppc mpc5xxx tqm5200
237 cpci5200_config
: unconfig
238 @.
/mkconfig
-a cpci5200 ppc mpc5xxx cpci5200 esd
240 hmi1001_config
: unconfig
241 @.
/mkconfig hmi1001 ppc mpc5xxx hmi1001
244 Lite5200_LOWBOOT_config \
245 Lite5200_LOWBOOT08_config \
246 icecube_5200_config \
247 icecube_5200_LOWBOOT_config \
248 icecube_5200_LOWBOOT08_config \
249 icecube_5200_DDR_config \
250 icecube_5200_DDR_LOWBOOT_config \
251 icecube_5200_DDR_LOWBOOT08_config \
252 icecube_5100_config
: unconfig
254 @
[ -z
"$(findstring LOWBOOT_,$@)" ] || \
255 { if
[ "$(findstring DDR,$@)" ] ; \
256 then echo
"TEXT_BASE = 0xFF800000" >board
/icecube
/config.tmp
; \
257 else echo
"TEXT_BASE = 0xFF000000" >board
/icecube
/config.tmp
; \
259 echo
"... with LOWBOOT configuration" ; \
261 @
[ -z
"$(findstring LOWBOOT08,$@)" ] || \
262 { echo
"TEXT_BASE = 0xFF800000" >board
/icecube
/config.tmp
; \
263 echo
"... with 8 MB flash only" ; \
264 echo
"... with LOWBOOT configuration" ; \
266 @
[ -z
"$(findstring DDR,$@)" ] || \
267 { echo
"#define CONFIG_MPC5200_DDR" >>include/config.h
; \
268 echo
"... DDR memory revision" ; \
270 @
[ -z
"$(findstring 5200,$@)" ] || \
271 { echo
"#define CONFIG_MPC5200" >>include/config.h
; \
272 echo
"... with MPC5200 processor" ; \
274 @
[ -z
"$(findstring 5100,$@)" ] || \
275 { echo
"#define CONFIG_MGT5100" >>include/config.h
; \
276 echo
"... with MGT5100 processor" ; \
278 @.
/mkconfig
-a IceCube ppc mpc5xxx icecube
280 inka4x0_config
: unconfig
281 @.
/mkconfig inka4x0 ppc mpc5xxx inka4x0
284 @.
/mkconfig
-a o2dnt ppc mpc5xxx o2dnt
286 pf5200_config
: unconfig
287 @.
/mkconfig
-a pf5200 ppc mpc5xxx pf5200 esd
291 PM520_ROMBOOT_config \
292 PM520_ROMBOOT_DDR_config
: unconfig
294 @
[ -z
"$(findstring DDR,$@)" ] || \
295 { echo
"#define CONFIG_MPC5200_DDR" >>include/config.h
; \
296 echo
"... DDR memory revision" ; \
298 @
[ -z
"$(findstring ROMBOOT,$@)" ] || \
299 { echo
"#define CONFIG_BOOT_ROM" >>include/config.h
; \
300 echo
"... booting from 8-bit flash" ; \
302 @.
/mkconfig
-a PM520 ppc mpc5xxx pm520
306 TOP5200_config
: unconfig
307 @ echo
"#define CONFIG_$(@:_config=) 1" >include/config.h
308 @.
/mkconfig
-a TOP5200 ppc mpc5xxx top5200 emk
312 Total5200_lowboot_config \
313 Total5200_Rev2_config \
314 Total5200_Rev2_lowboot_config
: unconfig
316 @
[ -z
"$(findstring 5100,$@)" ] || \
317 { echo
"#define CONFIG_MGT5100" >>include/config.h
; \
318 echo
"... with MGT5100 processor" ; \
320 @
[ -z
"$(findstring 5200,$@)" ] || \
321 { echo
"#define CONFIG_MPC5200" >>include/config.h
; \
322 echo
"... with MPC5200 processor" ; \
324 @
[ -n
"$(findstring Rev,$@)" ] || \
325 { echo
"#define CONFIG_TOTAL5200_REV 1" >>include/config.h
; \
326 echo
"... revision 1 board" ; \
328 @
[ -z
"$(findstring Rev2_,$@)" ] || \
329 { echo
"#define CONFIG_TOTAL5200_REV 2" >>include/config.h
; \
330 echo
"... revision 2 board" ; \
332 @
[ -z
"$(findstring lowboot_,$@)" ] || \
333 { echo
"TEXT_BASE = 0xFE000000" >board
/total5200
/config.tmp
; \
334 echo
"... with lowboot configuration" ; \
336 @.
/mkconfig
-a Total5200 ppc mpc5xxx total5200
338 TQM5200_auto_config \
342 MiniFAP_config
: unconfig
344 @
[ -z
"$(findstring MiniFAP,$@)" ] || \
345 { echo
"#define CONFIG_MINIFAP" >>include/config.h
; \
346 echo
"#define CONFIG_TQM5200_AC" >>include/config.h
; \
347 echo
"... TQM5200_AC on MiniFAP" ; \
349 @
[ -z
"$(findstring AA,$@)" ] || \
350 { echo
"#define CONFIG_TQM5200_AA" >>include/config.h
; \
351 echo
"... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
353 @
[ -z
"$(findstring AB,$@)" ] || \
354 { echo
"#define CONFIG_TQM5200_AB" >>include/config.h
; \
355 echo
"... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
356 echo
"... with Graphics Controller"; \
358 @
[ -z
"$(findstring AC,$@)" ] || \
359 { echo
"#define CONFIG_TQM5200_AC" >>include/config.h
; \
360 echo
"... with 4 MB Flash, 128 MB SDRAM" ; \
361 echo
"... with Graphics Controller"; \
363 @
[ -z
"$(findstring auto,$@)" ] || \
364 { echo
"#define CONFIG_CS_AUTOCONF" >>include/config.h
; \
365 echo
"... with automatic CS configuration" ; \
367 @.
/mkconfig
-a TQM5200 ppc mpc5xxx tqm5200
369 spieval_config
: unconfig
370 echo
"#define CONFIG_CS_AUTOCONF">>include/config.h
371 echo
"... with automatic CS configuration"
372 @.
/mkconfig
-a spieval ppc mpc5xxx tqm5200
374 #########################################################################
376 #########################################################################
382 $(if
$(findstring AdderII
,$@
), \
383 @echo
"#define CONFIG_MPC852T" > include/config.h
)
384 @.
/mkconfig
-a Adder ppc mpc8xx adder
391 FADS860T_config
: unconfig
392 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx fads
394 AMX860_config
: unconfig
395 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx amx860 westel
397 c2mon_config
: unconfig
398 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx c2mon
401 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx CCM siemens
403 cogent_mpc8xx_config
: unconfig
404 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx cogent
406 ELPT860_config
: unconfig
407 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx elpt860 LEOX
409 ESTEEM192E_config
: unconfig
410 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx esteem192e
412 ETX094_config
: unconfig
413 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx etx094
415 FLAGADM_config
: unconfig
416 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx flagadm
418 xtract_GEN860T
= $(subst _SC
,,$(subst _config
,,$1))
421 GEN860T_config
: unconfig
423 @
[ -z
"$(findstring _SC,$@)" ] || \
424 { echo
"#define CONFIG_SC" >>include/config.h
; \
425 echo
"With reduced H/W feature set (SC)..." ; \
427 @.
/mkconfig
-a
$(call xtract_GEN860T
,$@
) ppc mpc8xx gen860t
429 GENIETV_config
: unconfig
430 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx genietv
433 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx gth
435 hermes_config
: unconfig
436 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx hermes
438 HMI10_config
: unconfig
439 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx tqm8xx
441 IAD210_config
: unconfig
442 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx IAD210 siemens
444 xtract_ICU862
= $(subst _100MHz
,,$(subst _config
,,$1))
446 ICU862_100MHz_config \
447 ICU862_config
: unconfig
449 @
[ -z
"$(findstring _100MHz,$@)" ] || \
450 { echo
"#define CONFIG_100MHz" >>include/config.h
; \
451 echo
"... with 100MHz system clock" ; \
453 @.
/mkconfig
-a
$(call xtract_ICU862
,$@
) ppc mpc8xx icu862
455 IP860_config
: unconfig
456 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx ip860
460 IVML24_config
: unconfig
462 @
[ -z
"$(findstring IVML24_config,$@)" ] || \
463 { echo
"#define CONFIG_IVML24_16M" >>include/config.h
; \
465 @
[ -z
"$(findstring IVML24_128_config,$@)" ] || \
466 { echo
"#define CONFIG_IVML24_32M" >>include/config.h
; \
468 @
[ -z
"$(findstring IVML24_256_config,$@)" ] || \
469 { echo
"#define CONFIG_IVML24_64M" >>include/config.h
; \
471 @.
/mkconfig
-a IVML24 ppc mpc8xx ivm
475 IVMS8_config
: unconfig
477 @
[ -z
"$(findstring IVMS8_config,$@)" ] || \
478 { echo
"#define CONFIG_IVMS8_16M" >>include/config.h
; \
480 @
[ -z
"$(findstring IVMS8_128_config,$@)" ] || \
481 { echo
"#define CONFIG_IVMS8_32M" >>include/config.h
; \
483 @
[ -z
"$(findstring IVMS8_256_config,$@)" ] || \
484 { echo
"#define CONFIG_IVMS8_64M" >>include/config.h
; \
486 @.
/mkconfig
-a IVMS8 ppc mpc8xx ivm
488 KUP4K_config
: unconfig
489 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx kup4k kup
491 KUP4X_config
: unconfig
492 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx kup4x kup
494 LANTEC_config
: unconfig
495 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx lantec
497 lwmon_config
: unconfig
498 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx lwmon
501 MBX860T_config
: unconfig
502 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx mbx8xx
504 MHPC_config
: unconfig
505 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx mhpc eltec
507 MVS1_config
: unconfig
508 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx mvs1
510 xtract_NETVIA
= $(subst _V2
,,$(subst _config
,,$1))
513 NETVIA_config
: unconfig
515 @
[ -z
"$(findstring NETVIA_config,$@)" ] || \
516 { echo
"#define CONFIG_NETVIA_VERSION 1" >>include/config.h
; \
517 echo
"... Version 1" ; \
519 @
[ -z
"$(findstring NETVIA_V2_config,$@)" ] || \
520 { echo
"#define CONFIG_NETVIA_VERSION 2" >>include/config.h
; \
521 echo
"... Version 2" ; \
523 @.
/mkconfig
-a
$(call xtract_NETVIA
,$@
) ppc mpc8xx netvia
525 xtract_NETPHONE
= $(subst _V2
,,$(subst _config
,,$1))
528 NETPHONE_config
: unconfig
530 @
[ -z
"$(findstring NETPHONE_config,$@)" ] || \
531 { echo
"#define CONFIG_NETPHONE_VERSION 1" >>include/config.h
; \
533 @
[ -z
"$(findstring NETPHONE_V2_config,$@)" ] || \
534 { echo
"#define CONFIG_NETPHONE_VERSION 2" >>include/config.h
; \
536 @.
/mkconfig
-a
$(call xtract_NETPHONE
,$@
) ppc mpc8xx netphone
538 xtract_NETTA
= $(subst _SWAPHOOK
,,$(subst _6412
,,$(subst _ISDN
,,$(subst _config
,,$1))))
540 NETTA_ISDN_6412_SWAPHOOK_config \
541 NETTA_ISDN_SWAPHOOK_config \
542 NETTA_6412_SWAPHOOK_config \
543 NETTA_SWAPHOOK_config \
544 NETTA_ISDN_6412_config \
547 NETTA_config
: unconfig
549 @
[ -z
"$(findstring ISDN_,$@)" ] || \
550 { echo
"#define CONFIG_NETTA_ISDN 1" >>include/config.h
; \
552 @
[ -n
"$(findstring ISDN_,$@)" ] || \
553 { echo
"#undef CONFIG_NETTA_ISDN" >>include/config.h
; \
555 @
[ -z
"$(findstring 6412_,$@)" ] || \
556 { echo
"#define CONFIG_NETTA_6412 1" >>include/config.h
; \
558 @
[ -n
"$(findstring 6412_,$@)" ] || \
559 { echo
"#undef CONFIG_NETTA_6412" >>include/config.h
; \
561 @
[ -z
"$(findstring SWAPHOOK_,$@)" ] || \
562 { echo
"#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h
; \
564 @
[ -n
"$(findstring SWAPHOOK_,$@)" ] || \
565 { echo
"#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h
; \
567 @.
/mkconfig
-a
$(call xtract_NETTA
,$@
) ppc mpc8xx netta
569 xtract_NETTA2
= $(subst _V2
,,$(subst _config
,,$1))
572 NETTA2_config
: unconfig
574 @
[ -z
"$(findstring NETTA2_config,$@)" ] || \
575 { echo
"#define CONFIG_NETTA2_VERSION 1" >>include/config.h
; \
577 @
[ -z
"$(findstring NETTA2_V2_config,$@)" ] || \
578 { echo
"#define CONFIG_NETTA2_VERSION 2" >>include/config.h
; \
580 @.
/mkconfig
-a
$(call xtract_NETTA2
,$@
) ppc mpc8xx netta2
582 NC650_config
: unconfig
583 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx nc650
585 NX823_config
: unconfig
586 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx nx823
588 pcu_e_config
: unconfig
589 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx pcu_e siemens
591 QS850_config
: unconfig
592 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx qs850 snmc
594 QS823_config
: unconfig
595 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx qs850 snmc
597 QS860T_config
: unconfig
598 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx qs860t snmc
600 quantum_config
: unconfig
601 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx quantum
603 R360MPI_config
: unconfig
604 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx r360mpi
606 RBC823_config
: unconfig
607 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx rbc823
609 RPXClassic_config
: unconfig
610 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx RPXClassic
612 RPXlite_config
: unconfig
613 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx RPXlite
615 RPXlite_DW_64_config \
616 RPXlite_DW_LCD_config \
617 RPXlite_DW_64_LCD_config \
618 RPXlite_DW_NVRAM_config \
619 RPXlite_DW_NVRAM_64_config \
620 RPXlite_DW_NVRAM_LCD_config \
621 RPXlite_DW_NVRAM_64_LCD_config \
622 RPXlite_DW_config
: unconfig
624 @
[ -z
"$(findstring _64,$@)" ] || \
625 { echo
"#define RPXlite_64MHz" >>include/config.h
; \
626 echo
"... with 64MHz system clock ..."; \
628 @
[ -z
"$(findstring _LCD,$@)" ] || \
629 { echo
"#define CONFIG_LCD" >>include/config.h
; \
630 echo
"#define CONFIG_NEC_NL6448BC20" >>include/config.h
; \
631 echo
"... with LCD display ..."; \
633 @
[ -z
"$(findstring _NVRAM,$@)" ] || \
634 { echo
"#define CFG_ENV_IS_IN_NVRAM" >>include/config.h
; \
635 echo
"... with ENV in NVRAM ..."; \
637 @.
/mkconfig
-a RPXlite_DW ppc mpc8xx RPXlite_dw
640 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx rmu
642 RRvision_config
: unconfig
643 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx RRvision
645 RRvision_LCD_config
: unconfig
646 @echo
"#define CONFIG_LCD" >include/config.h
647 @echo
"#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
648 @.
/mkconfig
-a RRvision ppc mpc8xx RRvision
650 SM850_config
: unconfig
651 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx tqm8xx
653 SPD823TS_config
: unconfig
654 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx spd8xx
656 stxxtc_config
: unconfig
657 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx stxxtc
659 svm_sc8xx_config
: unconfig
661 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx svm_sc8xx
663 SXNI855T_config
: unconfig
664 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx sixnet
666 # EMK MPC8xx based modules
667 TOP860_config
: unconfig
668 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx top860 emk
670 # Play some tricks for configuration selection
671 # Only 855 and 860 boards may come with FEC
672 # and only 823 boards may have LCD support
673 xtract_8xx
= $(subst _LCD
,,$(subst _config
,,$1))
689 TQM866M_config
: unconfig
691 @
[ -z
"$(findstring _LCD,$@)" ] || \
692 { echo
"#define CONFIG_LCD" >>include/config.h
; \
693 echo
"#define CONFIG_NEC_NL6448BC20" >>include/config.h
; \
694 echo
"... with LCD display" ; \
696 @.
/mkconfig
-a
$(call xtract_8xx
,$@
) ppc mpc8xx tqm8xx
698 TTTech_config
: unconfig
699 @echo
"#define CONFIG_LCD" >include/config.h
700 @echo
"#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
701 @.
/mkconfig
-a TQM823L ppc mpc8xx tqm8xx
703 uc100_config
: unconfig
704 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx uc100
707 @echo
"#define CONFIG_LCD" >include/config.h
708 @echo
"#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
709 @.
/mkconfig
$(@
:_config
=) ppc mpc8xx v37
712 @echo
"#define CONFIG_LCD" >include/config.h
713 @echo
"#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h
714 @.
/mkconfig
-a TQM823L ppc mpc8xx tqm8xx
716 #########################################################################
718 #########################################################################
719 xtract_4xx
= $(subst _25
,,$(subst _33
,,$(subst _BA
,,$(subst _ME
,,$(subst _HI
,,$(subst _config
,,$1))))))
721 ADCIOP_config
: unconfig
722 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx adciop esd
724 APC405_config
: unconfig
725 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx apc405 esd
727 AR405_config
: unconfig
728 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx ar405 esd
730 ASH405_config
: unconfig
731 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx ash405 esd
733 bamboo_config
: unconfig
734 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx bamboo amcc
736 bubinga_config
: unconfig
737 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx bubinga amcc
739 CANBT_config
: unconfig
740 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx canbt esd
743 CATcenter_25_config \
744 CATcenter_33_config
: unconfig
745 @ echo
"/* CATcenter uses PPChameleon Model ME */" > include/config.h
746 @ echo
"#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
747 @
[ -z
"$(findstring _25,$@)" ] || \
748 { echo
"#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h
; \
749 echo
"SysClk = 25MHz" ; \
751 @
[ -z
"$(findstring _33,$@)" ] || \
752 { echo
"#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h
; \
753 echo
"SysClk = 33MHz" ; \
755 @.
/mkconfig
-a
$(call xtract_4xx
,$@
) ppc ppc4xx PPChameleonEVB dave
757 CPCI2DP_config
: unconfig
758 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx cpci2dp esd
763 CPCI405AB_config
: unconfig
764 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx cpci405 esd
765 @echo
"BOARD_REVISION = $(@:_config=)" >>include/config.mk
767 CPCI440_config
: unconfig
768 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx cpci440 esd
770 CPCIISER4_config
: unconfig
771 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx cpciiser4 esd
773 CRAYL1_config
: unconfig
774 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx L1 cray
776 csb272_config
: unconfig
777 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx csb272
779 csb472_config
: unconfig
780 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx csb472
782 DASA_SIM_config
: unconfig
783 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx dasa_sim esd
785 DP405_config
: unconfig
786 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx dp405 esd
788 DU405_config
: unconfig
789 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx du405 esd
791 ebony_config
: unconfig
792 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx ebony amcc
794 ERIC_config
: unconfig
795 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx eric
797 EXBITGEN_config
: unconfig
798 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx exbitgen
800 G2000_config
: unconfig
801 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx g2000
803 HH405_config
: unconfig
804 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx hh405 esd
806 HUB405_config
: unconfig
807 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx hub405 esd
810 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx jse
812 KAREF_config
: unconfig
813 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx karef sandburst
815 METROBOX_config
: unconfig
816 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx metrobox sandburst
818 MIP405_config
: unconfig
819 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx mip405 mpl
821 MIP405T_config
: unconfig
822 @echo
"#define CONFIG_MIP405T" >include/config.h
823 @echo
"Enable subset config for MIP405T"
824 @.
/mkconfig
-a MIP405 ppc ppc4xx mip405 mpl
827 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx ml2
829 ml300_config
: unconfig
830 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx ml300 xilinx
832 ocotea_config
: unconfig
833 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx ocotea amcc
836 ORSG_config
: unconfig
837 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx ocrtc esd
839 PCI405_config
: unconfig
840 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx pci405 esd
842 PIP405_config
: unconfig
843 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx pip405 mpl
845 PLU405_config
: unconfig
846 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx plu405 esd
848 PMC405_config
: unconfig
849 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx pmc405 esd
851 PPChameleonEVB_config \
852 PPChameleonEVB_BA_25_config \
853 PPChameleonEVB_ME_25_config \
854 PPChameleonEVB_HI_25_config \
855 PPChameleonEVB_BA_33_config \
856 PPChameleonEVB_ME_33_config \
857 PPChameleonEVB_HI_33_config
: unconfig
859 @
[ -z
"$(findstring EVB_BA,$@)" ] || \
860 { echo
"#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h
; \
861 echo
"... BASIC model" ; \
863 @
[ -z
"$(findstring EVB_ME,$@)" ] || \
864 { echo
"#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h
; \
865 echo
"... MEDIUM model" ; \
867 @
[ -z
"$(findstring EVB_HI,$@)" ] || \
868 { echo
"#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h
; \
869 echo
"... HIGH-END model" ; \
871 @
[ -z
"$(findstring _25,$@)" ] || \
872 { echo
"#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h
; \
873 echo
"SysClk = 25MHz" ; \
875 @
[ -z
"$(findstring _33,$@)" ] || \
876 { echo
"#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h
; \
877 echo
"SysClk = 33MHz" ; \
879 @.
/mkconfig
-a
$(call xtract_4xx
,$@
) ppc ppc4xx PPChameleonEVB dave
881 sbc405_config
: unconfig
882 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx sbc405
884 sycamore_config
: unconfig
885 @echo
"Configuring for sycamore board as subset of walnut..."
886 @.
/mkconfig
-a walnut ppc ppc4xx walnut amcc
888 VOH405_config
: unconfig
889 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx voh405 esd
891 VOM405_config
: unconfig
892 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx vom405 esd
895 W7OLMG_config
: unconfig
896 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx w7o
898 walnut_config
: unconfig
899 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx walnut amcc
901 WUH405_config
: unconfig
902 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx wuh405 esd
904 XPEDITE1K_config
: unconfig
905 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx xpedite1k
907 yosemite_config
: unconfig
908 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx yosemite amcc
910 yellowstone_config
: unconfig
911 @.
/mkconfig
$(@
:_config
=) ppc ppc4xx yellowstone amcc
913 #########################################################################
915 #########################################################################
918 Yukon8220_config
: unconfig
919 @.
/mkconfig
$(@
:_config
=) ppc mpc8220 alaska
921 sorcery_config
: unconfig
922 @.
/mkconfig
$(@
:_config
=) ppc mpc8220 sorcery
924 #########################################################################
926 #########################################################################
927 xtract_82xx
= $(subst _BIGFLASH
,,$(subst _ROMBOOT
,,$(subst _L2
,,$(subst _266MHz
,,$(subst _300MHz
,,$(subst _config
,,$1))))))
929 A3000_config
: unconfig
930 @.
/mkconfig
$(@
:_config
=) ppc mpc824x a3000
933 @.
/mkconfig
$(@
:_config
=) ppc mpc824x bmw
936 CPC45_ROMBOOT_config
: unconfig
937 @.
/mkconfig
$(call xtract_82xx
,$@
) ppc mpc824x cpc45
939 if
[ "$(findstring _ROMBOOT_,$@)" ] ; then \
940 echo
"CONFIG_BOOT_ROM = y" >> config.mk
; \
941 echo
"... booting from 8-bit flash" ; \
943 echo
"CONFIG_BOOT_ROM = n" >> config.mk
; \
944 echo
"... booting from 64-bit flash" ; \
946 echo
"export CONFIG_BOOT_ROM" >> config.mk
;
948 CU824_config
: unconfig
949 @.
/mkconfig
$(@
:_config
=) ppc mpc824x cu824
951 debris_config
: unconfig
952 @.
/mkconfig
$(@
:_config
=) ppc mpc824x debris etin
954 eXalion_config
: unconfig
955 @.
/mkconfig
$(@
:_config
=) ppc mpc824x eXalion
957 HIDDEN_DRAGON_config
: unconfig
958 @.
/mkconfig
$(@
:_config
=) ppc mpc824x hidden_dragon
960 MOUSSE_config
: unconfig
961 @.
/mkconfig
$(@
:_config
=) ppc mpc824x mousse
963 MUSENKI_config
: unconfig
964 @.
/mkconfig
$(@
:_config
=) ppc mpc824x musenki
966 MVBLUE_config
: unconfig
967 @.
/mkconfig
$(@
:_config
=) ppc mpc824x mvblue
970 @.
/mkconfig
$(@
:_config
=) ppc mpc824x oxc
972 PN62_config
: unconfig
973 @.
/mkconfig
$(@
:_config
=) ppc mpc824x pn62
975 Sandpoint8240_config
: unconfig
976 @.
/mkconfig
$(@
:_config
=) ppc mpc824x sandpoint
978 Sandpoint8245_config
: unconfig
979 @.
/mkconfig
$(@
:_config
=) ppc mpc824x sandpoint
981 sbc8240_config
: unconfig
982 @.
/mkconfig
$(@
:_config
=) ppc mpc824x sbc8240
984 SL8245_config
: unconfig
985 @.
/mkconfig
$(@
:_config
=) ppc mpc824x sl8245
987 utx8245_config
: unconfig
988 @.
/mkconfig
$(@
:_config
=) ppc mpc824x utx8245
990 cobra5272_config
: unconfig
991 @.
/mkconfig
$(@
:_config
=) m68k mcf52x2 cobra5272
993 #########################################################################
995 #########################################################################
998 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 atc
1000 cogent_mpc8260_config
: unconfig
1001 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 cogent
1004 CPU86_ROMBOOT_config
: unconfig
1005 @.
/mkconfig
$(call xtract_82xx
,$@
) ppc mpc8260 cpu86
1007 if
[ "$(findstring _ROMBOOT_,$@)" ] ; then \
1008 echo
"CONFIG_BOOT_ROM = y" >> config.mk
; \
1009 echo
"... booting from 8-bit flash" ; \
1011 echo
"CONFIG_BOOT_ROM = n" >> config.mk
; \
1012 echo
"... booting from 64-bit flash" ; \
1014 echo
"export CONFIG_BOOT_ROM" >> config.mk
;
1017 CPU87_ROMBOOT_config
: unconfig
1018 @.
/mkconfig
$(call xtract_82xx
,$@
) ppc mpc8260 cpu87
1020 if
[ "$(findstring _ROMBOOT_,$@)" ] ; then \
1021 echo
"CONFIG_BOOT_ROM = y" >> config.mk
; \
1022 echo
"... booting from 8-bit flash" ; \
1024 echo
"CONFIG_BOOT_ROM = n" >> config.mk
; \
1025 echo
"... booting from 64-bit flash" ; \
1027 echo
"export CONFIG_BOOT_ROM" >> config.mk
;
1030 ep8248E_config
: unconfig
1031 @.
/mkconfig ep8248 ppc mpc8260 ep8248
1033 ep8260_config
: unconfig
1034 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 ep8260
1036 gw8260_config
: unconfig
1037 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 gw8260
1039 hymod_config
: unconfig
1040 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 hymod
1042 IDS8247_config
: unconfig
1043 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 ids8247
1045 IPHASE4539_config
: unconfig
1046 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 iphase4539
1049 ISPAN_REVB_config
: unconfig
1050 @if
[ "$(findstring _REVB_,$@)" ] ; then \
1051 echo
"#define CFG_REV_B" > include/config.h
; \
1053 @.
/mkconfig
-a ISPAN ppc mpc8260 ispan
1056 MPC8260ADS_lowboot_config \
1057 MPC8260ADS_33MHz_config \
1058 MPC8260ADS_33MHz_lowboot_config \
1059 MPC8260ADS_40MHz_config \
1060 MPC8260ADS_40MHz_lowboot_config \
1062 MPC8272ADS_lowboot_config \
1064 PQ2FADS_lowboot_config \
1066 PQ2FADS-VR_lowboot_config \
1068 PQ2FADS-ZU_lowboot_config \
1069 PQ2FADS-ZU_66MHz_config \
1070 PQ2FADS-ZU_66MHz_lowboot_config \
1072 $(if
$(findstring PQ2FADS
,$@
), \
1073 @echo
"#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h
, \
1074 @echo
"#define CONFIG_ADSTYPE CFG_"$(subst MPC
,,$(word 1,$(subst _
, ,$@
))) > include/config.h
)
1075 $(if
$(findstring MHz
,$@
), \
1076 @echo
"#define CONFIG_8260_CLKIN" $(subst MHz
,,$(word 2,$(subst _
, ,$@
)))"000000" >> include/config.h
, \
1077 $(if
$(findstring VR
,$@
), \
1078 @echo
"#define CONFIG_8260_CLKIN 66000000" >> include/config.h
))
1079 @
[ -z
"$(findstring lowboot_,$@)" ] || \
1080 { echo
"TEXT_BASE = 0xFF800000" >board
/mpc8260ads
/config.tmp
; \
1081 echo
"... with lowboot configuration" ; \
1083 @.
/mkconfig
-a MPC8260ADS ppc mpc8260 mpc8260ads
1085 MPC8266ADS_config
: unconfig
1086 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 mpc8266ads
1088 # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
1090 PM825_ROMBOOT_config \
1091 PM825_BIGFLASH_config \
1092 PM825_ROMBOOT_BIGFLASH_config \
1094 PM826_ROMBOOT_config \
1095 PM826_BIGFLASH_config \
1096 PM826_ROMBOOT_BIGFLASH_config
: unconfig
1097 @if
[ "$(findstring PM825_,$@)" ] ; then \
1098 echo
"#define CONFIG_PCI" >include/config.h
; \
1100 >include/config.h
; \
1102 @if
[ "$(findstring _ROMBOOT_,$@)" ] ; then \
1103 echo
"... booting from 8-bit flash" ; \
1104 echo
"#define CONFIG_BOOT_ROM" >>include/config.h
; \
1105 echo
"TEXT_BASE = 0xFF800000" >board
/pm826
/config.tmp
; \
1106 if
[ "$(findstring _BIGFLASH_,$@)" ] ; then \
1107 echo
"... with 32 MB Flash" ; \
1108 echo
"#define CONFIG_FLASH_32MB" >>include/config.h
; \
1111 echo
"... booting from 64-bit flash" ; \
1112 if
[ "$(findstring _BIGFLASH_,$@)" ] ; then \
1113 echo
"... with 32 MB Flash" ; \
1114 echo
"#define CONFIG_FLASH_32MB" >>include/config.h
; \
1115 echo
"TEXT_BASE = 0x40000000" >board
/pm826
/config.tmp
; \
1117 echo
"TEXT_BASE = 0xFF000000" >board
/pm826
/config.tmp
; \
1120 @.
/mkconfig
-a PM826 ppc mpc8260 pm826
1124 PM828_ROMBOOT_config \
1125 PM828_ROMBOOT_PCI_config
: unconfig
1126 @if
[ -z
"$(findstring _PCI_,$@)" ] ; then \
1127 echo
"#define CONFIG_PCI" >>include/config.h
; \
1128 echo
"... with PCI enabled" ; \
1130 >include/config.h
; \
1132 @if
[ "$(findstring _ROMBOOT_,$@)" ] ; then \
1133 echo
"... booting from 8-bit flash" ; \
1134 echo
"#define CONFIG_BOOT_ROM" >>include/config.h
; \
1135 echo
"TEXT_BASE = 0xFF800000" >board
/pm826
/config.tmp
; \
1137 @.
/mkconfig
-a PM828 ppc mpc8260 pm828
1139 ppmc8260_config
: unconfig
1140 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 ppmc8260
1142 Rattler8248_config \
1143 Rattler_config
: unconfig
1144 $(if
$(findstring 8248,$@
), \
1145 @echo
"#define CONFIG_MPC8248" > include/config.h
)
1146 @.
/mkconfig
-a Rattler ppc mpc8260 rattler
1148 RPXsuper_config
: unconfig
1149 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 rpxsuper
1151 rsdproto_config
: unconfig
1152 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 rsdproto
1154 sacsng_config
: unconfig
1155 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 sacsng
1157 sbc8260_config
: unconfig
1158 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 sbc8260
1160 SCM_config
: unconfig
1161 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 SCM siemens
1172 TQM8265_AA_config
: unconfig
1174 TQM8255_AA_config
) CTYPE
=MPC8255
; CFREQ
=300; CACHE
=no
; BMODE
=8260;; \
1175 TQM8260_AA_config
) CTYPE
=MPC8260
; CFREQ
=200; CACHE
=no
; BMODE
=8260;; \
1176 TQM8260_AB_config
) CTYPE
=MPC8260
; CFREQ
=200; CACHE
=yes
; BMODE
=60x
;; \
1177 TQM8260_AC_config
) CTYPE
=MPC8260
; CFREQ
=200; CACHE
=yes
; BMODE
=60x
;; \
1178 TQM8260_AD_config
) CTYPE
=MPC8260
; CFREQ
=300; CACHE
=no
; BMODE
=60x
;; \
1179 TQM8260_AE_config
) CTYPE
=MPC8260
; CFREQ
=266; CACHE
=no
; BMODE
=8260;; \
1180 TQM8260_AF_config
) CTYPE
=MPC8260
; CFREQ
=300; CACHE
=no
; BMODE
=60x
;; \
1181 TQM8260_AG_config
) CTYPE
=MPC8260
; CFREQ
=300; CACHE
=no
; BMODE
=8260;; \
1182 TQM8260_AH_config
) CTYPE
=MPC8260
; CFREQ
=300; CACHE
=yes
; BMODE
=60x
;; \
1183 TQM8265_AA_config
) CTYPE
=MPC8265
; CFREQ
=300; CACHE
=no
; BMODE
=60x
;; \
1185 >include/config.h
; \
1186 if
[ "$${CTYPE}" != "MPC8260" ] ; then \
1187 echo
"#define CONFIG_$${CTYPE}" >>include/config.h
; \
1189 echo
"#define CONFIG_$${CFREQ}MHz" >>include/config.h
; \
1190 echo
"... with $${CFREQ}MHz system clock" ; \
1191 if
[ "$${CACHE}" == "yes" ] ; then \
1192 echo
"#define CONFIG_L2_CACHE" >>include/config.h
; \
1193 echo
"... with L2 Cache support" ; \
1195 echo
"#undef CONFIG_L2_CACHE" >>include/config.h
; \
1196 echo
"... without L2 Cache support" ; \
1198 if
[ "$${BMODE}" == "60x" ] ; then \
1199 echo
"#define CONFIG_BUSMODE_60x" >>include/config.h
; \
1200 echo
"... with 60x Bus Mode" ; \
1202 echo
"#undef CONFIG_BUSMODE_60x" >>include/config.h
; \
1203 echo
"... without 60x Bus Mode" ; \
1205 @.
/mkconfig
-a TQM8260 ppc mpc8260 tqm8260
1207 VoVPN-GW_66MHz_config \
1208 VoVPN-GW_100MHz_config
: unconfig
1209 @echo
"#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
1210 @.
/mkconfig
-a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
1212 ZPC1900_config
: unconfig
1213 @.
/mkconfig
$(@
:_config
=) ppc mpc8260 zpc1900
1215 #========================================================================
1217 #========================================================================
1218 #########################################################################
1220 #########################################################################
1222 M5272C3_config
: unconfig
1223 @.
/mkconfig
$(@
:_config
=) m68k mcf52x2 m5272c3
1225 M5282EVB_config
: unconfig
1226 @.
/mkconfig
$(@
:_config
=) m68k mcf52x2 m5282evb
1228 TASREG_config
: unconfig
1229 @.
/mkconfig
$(@
:_config
=) m68k mcf52x2 tasreg esd
1231 #########################################################################
1233 #########################################################################
1235 MPC8349ADS_config
: unconfig
1236 @.
/mkconfig
$(@
:_config
=) ppc mpc83xx mpc8349ads
1238 #########################################################################
1240 #########################################################################
1242 MPC8540ADS_config
: unconfig
1243 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx mpc8540ads
1245 MPC8540EVAL_config \
1246 MPC8540EVAL_33_config \
1247 MPC8540EVAL_66_config \
1248 MPC8540EVAL_33_slave_config \
1249 MPC8540EVAL_66_slave_config
: unconfig
1250 @echo
"" >include/config.h
; \
1251 if
[ "$(findstring _33_,$@)" ] ; then \
1252 echo
-n
"... 33 MHz PCI" ; \
1254 echo
"#define CONFIG_SYSCLK_66M" >>include/config.h
; \
1255 echo
-n
"... 66 MHz PCI" ; \
1257 if
[ "$(findstring _slave_,$@)" ] ; then \
1258 echo
"#define CONFIG_PCI_SLAVE" >>include/config.h
; \
1263 @.
/mkconfig
-a MPC8540EVAL ppc mpc85xx mpc8540eval
1265 MPC8560ADS_config
: unconfig
1266 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx mpc8560ads
1268 MPC8541CDS_config
: unconfig
1269 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx mpc8541cds cds
1271 MPC8548CDS_config
: unconfig
1272 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx mpc8548cds cds
1274 MPC8555CDS_config
: unconfig
1275 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx mpc8555cds cds
1277 PM854_config
: unconfig
1278 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx pm854
1280 PM856_config
: unconfig
1281 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx pm856
1285 sbc8540_66_config
: unconfig
1286 @if
[ "$(findstring _66_,$@)" ] ; then \
1287 echo
"#define CONFIG_PCI_66" >>include/config.h
; \
1288 echo
"... 66 MHz PCI" ; \
1290 >include/config.h
; \
1291 echo
"... 33 MHz PCI" ; \
1293 @.
/mkconfig
-a SBC8540 ppc mpc85xx sbc8560
1297 sbc8560_66_config
: unconfig
1298 @if
[ "$(findstring _66_,$@)" ] ; then \
1299 echo
"#define CONFIG_PCI_66" >>include/config.h
; \
1300 echo
"... 66 MHz PCI" ; \
1302 >include/config.h
; \
1303 echo
"... 33 MHz PCI" ; \
1305 @.
/mkconfig
-a sbc8560 ppc mpc85xx sbc8560
1307 stxgp3_config
: unconfig
1308 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx stxgp3
1310 TQM8540_config
: unconfig
1311 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx tqm8540
1313 TQM8560_config
: unconfig
1314 @.
/mkconfig
$(@
:_config
=) ppc mpc85xx tqm8560
1316 #########################################################################
1318 #########################################################################
1320 AmigaOneG3SE_config
: unconfig
1321 @.
/mkconfig
$(@
:_config
=) ppc
74xx_7xx AmigaOneG3SE MAI
1323 BAB7xx_config
: unconfig
1324 @.
/mkconfig
$(@
:_config
=) ppc
74xx_7xx bab7xx eltec
1326 CPCI750_config
: unconfig
1327 @.
/mkconfig CPCI750 ppc
74xx_7xx cpci750 esd
1329 DB64360_config
: unconfig
1330 @.
/mkconfig DB64360 ppc
74xx_7xx db64360 Marvell
1332 DB64460_config
: unconfig
1333 @.
/mkconfig DB64460 ppc
74xx_7xx db64460 Marvell
1335 ELPPC_config
: unconfig
1336 @.
/mkconfig
$(@
:_config
=) ppc
74xx_7xx elppc eltec
1339 EVB64260_750CX_config
: unconfig
1340 @.
/mkconfig EVB64260 ppc
74xx_7xx evb64260
1342 P3G4_config
: unconfig
1343 @.
/mkconfig
$(@
:_config
=) ppc
74xx_7xx evb64260
1346 PCIPPC6_config
: unconfig
1347 @.
/mkconfig
$(@
:_config
=) ppc
74xx_7xx pcippc2
1349 ZUMA_config
: unconfig
1350 @.
/mkconfig
$(@
:_config
=) ppc
74xx_7xx evb64260
1352 #========================================================================
1354 #========================================================================
1355 #########################################################################
1356 ## StrongARM Systems
1357 #########################################################################
1359 assabet_config
: unconfig
1360 @.
/mkconfig
$(@
:_config
=) arm sa1100 assabet
1362 dnp1110_config
: unconfig
1363 @.
/mkconfig
$(@
:_config
=) arm sa1100 dnp1110
1365 gcplus_config
: unconfig
1366 @.
/mkconfig
$(@
:_config
=) arm sa1100 gcplus
1368 lart_config
: unconfig
1369 @.
/mkconfig
$(@
:_config
=) arm sa1100 lart
1371 shannon_config
: unconfig
1372 @.
/mkconfig
$(@
:_config
=) arm sa1100 shannon
1374 #########################################################################
1376 #########################################################################
1378 xtract_trab
= $(subst _bigram
,,$(subst _bigflash
,,$(subst _old
,,$(subst _config
,,$1))))
1380 xtract_omap1610xxx
= $(subst _cs0boot
,,$(subst _cs3boot
,,$(subst _cs_autoboot
,,$(subst _config
,,$1))))
1382 xtract_omap730p2
= $(subst _cs0boot
,,$(subst _cs3boot
,, $(subst _config
,,$1)))
1384 at91rm9200dk_config
: unconfig
1385 @.
/mkconfig
$(@
:_config
=) arm arm920t at91rm9200dk NULL at91rm9200
1387 cmc_pu2_config
: unconfig
1388 @.
/mkconfig
$(@
:_config
=) arm arm920t cmc_pu2 NULL at91rm9200
1390 ########################################################################
1391 ## ARM Integrator boards
1392 ## There are two variants /AP && /CP
1393 ## - many different core modules (CMs) can be used
1394 ## - some share characteristics
1395 ## Those without specific cpu support can still use U-Boot
1396 ## provided the ARM boot monitor (or similar) runs before U-Boot
1397 ## to set up the platform e.g. map writeable memory to 0x00000000
1398 ## setup MMU, setup caches etc.
1399 ## Ported cores are:-
1403 ########################################################################
1404 xtract_int_board
= $(subst _
$(subst integrator
$1_,,$(subst _config
,,$2)),,$(subst _config
,,$2))
1405 xtract_int_cm
= $(subst integrator
$1_,,$(subst _config
,,$2))
1406 #########################################################################
1408 #########################################################################
1409 integratorap_config
: unconfig
1410 @echo
-n
"/* Integrator configuration implied " > tmp.fil
; \
1411 echo
" by Makefile target */" >> tmp.fil
; \
1413 @echo
-n
"#define CONFIG_INTEGRATOR 1" >> tmp.fil
; \
1414 echo
" /* Integrator board */" >> tmp.fil
; \
1415 echo
-n
"#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil
; \
1416 echo
" 1 /* Integrator/AP */" >> tmp.fil
; \
1417 echo
"/* Core module not defined */" >> tmp.fil
; \
1418 echo
-n
"#define CONFIG_ARM_INTCM 1" >> tmp.fil
; \
1419 echo
-n
" /* Integrator core module " >> tmp.fil
; \
1420 echo
"with unknown core */" >> tmp.fil
; \
1422 mv tmp.fil .
/include/config.h
; \
1423 ubootlds
=board
/integratorap
/u-boot.lds
; \
1424 sed
-e
's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
1425 $$ubootlds > $$ubootlds.tmp
; \
1426 mv
-f
$$ubootlds.tmp
$$ubootlds; \
1427 .
/mkconfig
-a integratorap arm arm_intcm integratorap
;
1429 integratorap_CM720T_config integratorap_CM7TDMI_config \
1430 integratorap_CM920T_config integratorap_CM920T_ETM_config \
1431 integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \
1432 integratorap_CM940T_config integratorap_CM946E_S_config \
1433 integratorap_CM966E_S_config integratorap_CM10200E_config \
1434 integratorap_CM10220E_config integratorap_CM1026EJ_S_config \
1435 integratorap_CM1136JF_S_config
: unconfig
1436 @echo
-n
"/* Integrator configuration implied " > tmp.fil
; \
1437 echo
" by Makefile target */" >> tmp.fil
; \
1439 @echo
-n
"#define CONFIG_INTEGRATOR 1" >> tmp.fil
; \
1440 echo
" /* Integrator board */" >> tmp.fil
; \
1441 echo
-n
"#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil
; \
1442 echo
" 1 /* Integrator/AP */" >> tmp.fil
; \
1443 cm
=$(call xtract_int_cm
,ap
,$@
); \
1444 echo
-n
"#define CONFIG_$$cm " >> tmp.fil
; \
1445 echo
" /* core module */" >> tmp.fil
; \
1448 echo
-n
"#define CONFIG_ARM920" >> tmp.fil
; \
1449 echo
-n
"T 1 /* CPU" >> tmp.fil
; \
1450 echo
-n
" core is ARM920T" >> tmp.fil
; \
1451 echo
" */" >> tmp.fil
; \
1453 CM926EJ_S
) echo
-n
"#define CONFIG_ARM926" >> tmp.fil
; \
1454 echo
-n
"EJ_S 1 /* CPU" >> tmp.fil
; \
1455 echo
-n
" core is ARM926EJ-S" >> tmp.fil
; \
1456 echo
" */" >> tmp.fil
; \
1458 CM946E_S
) echo
-n
"#define CONFIG_ARM946" >> tmp.fil
; \
1459 echo
-n
"E_S 1 /* CPU" >> tmp.fil
; \
1460 echo
-n
" core is ARM946E-S" >> tmp.fil
; \
1461 echo
" */" >> tmp.fil
; \
1463 *) echo
-n
"#define CONFIG_ARM_IN" >> tmp.fil
; \
1464 echo
-n
"TCM 1 /* Int" >> tmp.fil
; \
1465 echo
-n
"egrator core module w" >> tmp.fil
; \
1466 echo
-n
"ith unported core" >> tmp.fil
; \
1467 echo
" */" >> tmp.fil
; \
1470 mv tmp.fil .
/include/config.h
; \
1471 ubootlds
=board
/$(call xtract_int_board
,ap
,$@
)/u-boot.lds
; \
1472 sed
-e
's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
1473 $$ubootlds > $$ubootlds.tmp
; \
1474 mv
-f
$$ubootlds.tmp
$$ubootlds; \
1475 .
/mkconfig
-a
$(call xtract_int_board
,ap
,$@
) arm
$$cpu \
1476 $(call xtract_int_board
,ap
,$@
);
1478 #########################################################################
1480 #########################################################################
1481 integratorcp_config
: unconfig
1482 @echo
-n
"/* Integrator configuration implied " > tmp.fil
; \
1483 echo
" by Makefile target */" >> tmp.fil
; \
1485 @echo
-n
"#define CONFIG_INTEGRATOR 1" >> tmp.fil
; \
1486 echo
" /* Integrator board */" >> tmp.fil
; \
1487 echo
-n
"#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil
; \
1488 echo
" 1 /* Integrator/CP */" >> tmp.fil
; \
1489 echo
"/* Core module not defined */" >> tmp.fil
; \
1490 echo
-n
"#define CONFIG_ARM_INTCM 1" >> tmp.fil
; \
1491 echo
-n
" /* Integrator core module " >> tmp.fil
; \
1492 echo
"with unknown core */" >> tmp.fil
; \
1494 echo
-n
"#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
; \
1495 echo
-n
" /* CM may not have " >> tmp.fil
; \
1496 echo
"multiple SSRAM mapping */" >> tmp.fil
; \
1497 echo
-n
"#undef CONFIG_CM_SPD_DETECT " >> tmp.fil
; \
1498 echo
-n
" /* CM may not support SPD " >> tmp.fil
; \
1499 echo
"query */" >> tmp.fil
; \
1500 echo
-n
"#undef CONFIG_CM_REMAP " >> tmp.fil
; \
1501 echo
-n
" /* CM may not support " >> tmp.fil
; \
1502 echo
"remapping */" >> tmp.fil
; \
1503 echo
-n
"#undef CONFIG_CM_INIT " >> tmp.fil
; \
1504 echo
-n
" /* CM may not have " >> tmp.fil
; \
1505 echo
"initialization reg */" >> tmp.fil
; \
1506 echo
-n
"#undef CONFIG_CM_TCRAM " >> tmp.fil
; \
1507 echo
-n
" /* CM may not have TCRAM */" >> tmp.fil
; \
1508 mv tmp.fil .
/include/config.h
; \
1509 ubootlds
=board
/integratorcp
/u-boot.lds
; \
1510 sed
-e
's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
1511 $$ubootlds > $$ubootlds.tmp
; \
1512 mv
-f
$$ubootlds.tmp
$$ubootlds; \
1513 .
/mkconfig
-a integratorcp arm arm_intcm integratorcp
;
1515 integratorcp_CM920T_config integratorcp_CM920T_ETM_config \
1516 integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \
1517 integratorcp_CM940T_config integratorcp_CM946E_S_config \
1518 integratorcp_CM966E_S_config integratorcp_CM10200E_config \
1519 integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \
1520 integratorcp_CM1136JF_S_config
: unconfig
1521 @echo
-n
"/* Integrator configuration implied " > tmp.fil
; \
1522 echo
" by Makefile target */" >> tmp.fil
; \
1524 @echo
-n
"#define CONFIG_INTEGRATOR 1" >> tmp.fil
; \
1525 echo
" /* Integrator board */" >> tmp.fil
; \
1526 echo
-n
"#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil
; \
1527 echo
" 1 /* Integrator/CP */" >> tmp.fil
; \
1528 cm
=$(call xtract_int_cm
,cp
,$@
); \
1529 echo
-n
"#define CONFIG_$$cm " >> tmp.fil
; \
1530 echo
" /* core module */" >> tmp.fil
; \
1531 echo
"/* $$cm core module */" >> tmp.fil
; \
1533 CM920T
) echo
-n
"#define CONFIG_ARM920" >> tmp.fil
; \
1534 echo
-n
"T 1 /* CPU" >> tmp.fil
; \
1535 echo
-n
" core is ARM920T" >> tmp.fil
; \
1536 echo
" */" >> tmp.fil
; \
1538 CM946E_S
) echo
-n
"#define CONFIG_ARM946" >> tmp.fil
; \
1539 echo
-n
"E_S 1 /* CPU" >> tmp.fil
; \
1540 echo
-n
" core is ARM946E-S" >> tmp.fil
; \
1541 echo
" */" >> tmp.fil
; \
1543 CM926EJ_S
) echo
-n
"#define CONFIG_ARM926" >> tmp.fil
; \
1544 echo
-n
"EJ_S 1 /* CPU" >> tmp.fil
; \
1545 echo
-n
" core is ARM926EJ-S" >> tmp.fil
; \
1546 echo
" */" >> tmp.fil
; \
1548 *) echo
-n
"#define CONFIG_ARM_IN" >> tmp.fil
; \
1549 echo
-n
"TCM 1 /* Int" >> tmp.fil
; \
1550 echo
-n
"egrator core module w" >> tmp.fil
; \
1551 echo
-n
"ith unported core" >> tmp.fil
; \
1552 echo
" */" >> tmp.fil
; \
1555 mv tmp.fil .
/include/config.h
; \
1556 ubootlds
=board
/$(call xtract_int_board
,cp
,$@
)/u-boot.lds
; \
1557 sed
-e
's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
1558 $$ubootlds > $$ubootlds.tmp
; \
1559 mv
-f
$$ubootlds.tmp
$$ubootlds; \
1560 .
/mkconfig
-a
$(call xtract_int_board
,cp
,$@
) arm
$$cpu \
1561 $(call xtract_int_board
,cp
,$@
);
1564 lpd7a404_config
: unconfig
1565 @.
/mkconfig
$(@
:_config
=) arm lh7a40x lpd7a40x
1567 mx1ads_config
: unconfig
1568 @.
/mkconfig
$(@
:_config
=) arm arm920t mx1ads NULL imx
1570 mx1fs2_config
: unconfig
1571 @.
/mkconfig
$(@
:_config
=) arm arm920t mx1fs2 NULL imx
1573 omap1510inn_config
: unconfig
1574 @.
/mkconfig
$(@
:_config
=) arm arm925t omap1510inn
1576 omap5912osk_config
: unconfig
1577 @.
/mkconfig
$(@
:_config
=) arm arm926ejs omap5912osk
1579 omap1610inn_config \
1580 omap1610inn_cs0boot_config \
1581 omap1610inn_cs3boot_config \
1582 omap1610inn_cs_autoboot_config \
1584 omap1610h2_cs0boot_config \
1585 omap1610h2_cs3boot_config \
1586 omap1610h2_cs_autoboot_config
: unconfig
1587 @if
[ "$(findstring _cs0boot_, $@)" ] ; then \
1588 echo
"#define CONFIG_CS0_BOOT" >> .
/include/config.h
; \
1589 echo
"... configured for CS0 boot"; \
1590 elif
[ "$(findstring _cs_autoboot_, $@)" ] ; then \
1591 echo
"#define CONFIG_CS_AUTOBOOT" >> .
/include/config.h
; \
1592 echo
"... configured for CS_AUTO boot"; \
1594 echo
"#define CONFIG_CS3_BOOT" >> .
/include/config.h
; \
1595 echo
"... configured for CS3 boot"; \
1597 @.
/mkconfig
-a
$(call xtract_omap1610xxx
,$@
) arm arm926ejs omap1610inn
1600 omap730p2_cs0boot_config \
1601 omap730p2_cs3boot_config
: unconfig
1602 @if
[ "$(findstring _cs0boot_, $@)" ] ; then \
1603 echo
"#define CONFIG_CS0_BOOT" >> .
/include/config.h
; \
1604 echo
"... configured for CS0 boot"; \
1606 echo
"#define CONFIG_CS3_BOOT" >> .
/include/config.h
; \
1607 echo
"... configured for CS3 boot"; \
1609 @.
/mkconfig
-a
$(call xtract_omap730p2
,$@
) arm arm926ejs omap730p2
1611 scb9328_config
: unconfig
1612 @.
/mkconfig
$(@
:_config
=) arm arm920t scb9328 NULL imx
1614 smdk2400_config
: unconfig
1615 @.
/mkconfig
$(@
:_config
=) arm arm920t smdk2400 NULL s3c24x0
1617 smdk2410_config
: unconfig
1618 @.
/mkconfig
$(@
:_config
=) arm arm920t smdk2410 NULL s3c24x0
1620 SX1_config
: unconfig
1621 @.
/mkconfig
$(@
:_config
=) arm arm925t sx1
1623 # TRAB default configuration: 8 MB Flash, 32 MB RAM
1625 trab_bigram_config \
1626 trab_bigflash_config \
1627 trab_old_config
: unconfig
1629 @
[ -z
"$(findstring _bigram,$@)" ] || \
1630 { echo
"#define CONFIG_FLASH_8MB" >>include/config.h
; \
1631 echo
"#define CONFIG_RAM_32MB" >>include/config.h
; \
1632 echo
"... with 8 MB Flash, 32 MB RAM" ; \
1634 @
[ -z
"$(findstring _bigflash,$@)" ] || \
1635 { echo
"#define CONFIG_FLASH_16MB" >>include/config.h
; \
1636 echo
"#define CONFIG_RAM_16MB" >>include/config.h
; \
1637 echo
"... with 16 MB Flash, 16 MB RAM" ; \
1638 echo
"TEXT_BASE = 0x0CF40000" >board
/trab
/config.tmp
; \
1640 @
[ -z
"$(findstring _old,$@)" ] || \
1641 { echo
"#define CONFIG_FLASH_8MB" >>include/config.h
; \
1642 echo
"#define CONFIG_RAM_16MB" >>include/config.h
; \
1643 echo
"... with 8 MB Flash, 16 MB RAM" ; \
1644 echo
"TEXT_BASE = 0x0CF40000" >board
/trab
/config.tmp
; \
1646 @.
/mkconfig
-a
$(call xtract_trab
,$@
) arm arm920t trab NULL s3c24x0
1648 VCMA9_config
: unconfig
1649 @.
/mkconfig
$(@
:_config
=) arm arm920t vcma9 mpl s3c24x0
1651 versatile_config
: unconfig
1652 @.
/mkconfig
$(@
:_config
=) arm arm926ejs versatile
1654 voiceblue_smallflash_config \
1655 voiceblue_config
: unconfig
1656 @if
[ "$(findstring _smallflash_,$@)" ] ; then \
1657 echo
"... boot from lower flash bank" ; \
1658 echo
"#define VOICEBLUE_SMALL_FLASH" >>include/config.h
; \
1659 echo
"VOICEBLUE_SMALL_FLASH=y" >board
/voiceblue
/config.tmp
; \
1661 echo
"... boot from upper flash bank" ; \
1662 >include/config.h
; \
1663 echo
"VOICEBLUE_SMALL_FLASH=n" >board
/voiceblue
/config.tmp
; \
1665 @.
/mkconfig
-a voiceblue arm arm925t voiceblue
1667 cm4008_config
: unconfig
1668 @.
/mkconfig
$(@
:_config
=) arm arm920t cm4008 NULL ks8695
1670 cm41xx_config
: unconfig
1671 @.
/mkconfig
$(@
:_config
=) arm arm920t cm41xx NULL ks8695
1673 #########################################################################
1675 #########################################################################
1677 B2_config
: unconfig
1678 @.
/mkconfig
$(@
:_config
=) arm s3c44b0 B2 dave
1680 #########################################################################
1682 #########################################################################
1684 ep7312_config
: unconfig
1685 @.
/mkconfig
$(@
:_config
=) arm arm720t ep7312
1687 impa7_config
: unconfig
1688 @.
/mkconfig
$(@
:_config
=) arm arm720t impa7
1690 modnet50_config
: unconfig
1691 @.
/mkconfig
$(@
:_config
=) arm arm720t modnet50
1693 evb4510_config
: unconfig
1694 @.
/mkconfig
$(@
:_config
=) arm arm720t evb4510
1696 #########################################################################
1698 #########################################################################
1700 adsvix_config
: unconfig
1701 @.
/mkconfig
$(@
:_config
=) arm pxa adsvix
1703 cerf250_config
: unconfig
1704 @.
/mkconfig
$(@
:_config
=) arm pxa cerf250
1706 cradle_config
: unconfig
1707 @.
/mkconfig
$(@
:_config
=) arm pxa cradle
1709 csb226_config
: unconfig
1710 @.
/mkconfig
$(@
:_config
=) arm pxa csb226
1712 innokom_config
: unconfig
1713 @.
/mkconfig
$(@
:_config
=) arm pxa innokom
1715 ixdp425_config
: unconfig
1716 @.
/mkconfig
$(@
:_config
=) arm ixp ixdp425
1718 lubbock_config
: unconfig
1719 @.
/mkconfig
$(@
:_config
=) arm pxa lubbock
1721 logodl_config
: unconfig
1722 @.
/mkconfig
$(@
:_config
=) arm pxa logodl
1724 wepep250_config
: unconfig
1725 @.
/mkconfig
$(@
:_config
=) arm pxa wepep250
1727 xaeniax_config
: unconfig
1728 @.
/mkconfig
$(@
:_config
=) arm pxa xaeniax
1730 xm250_config
: unconfig
1731 @.
/mkconfig
$(@
:_config
=) arm pxa xm250
1733 xsengine_config
: unconfig
1734 @.
/mkconfig
$(@
:_config
=) arm pxa xsengine
1736 #########################################################################
1738 #########################################################################
1739 omap2420h4_config
: unconfig
1740 @.
/mkconfig
$(@
:_config
=) arm arm1136 omap2420h4
1742 #========================================================================
1744 #========================================================================
1745 #########################################################################
1747 #########################################################################
1748 sc520_cdp_config
: unconfig
1749 @.
/mkconfig
$(@
:_config
=) i386 i386 sc520_cdp
1751 sc520_spunk_config
: unconfig
1752 @.
/mkconfig
$(@
:_config
=) i386 i386 sc520_spunk
1754 sc520_spunk_rel_config
: unconfig
1755 @.
/mkconfig
$(@
:_config
=) i386 i386 sc520_spunk
1757 #========================================================================
1759 #========================================================================
1760 #########################################################################
1762 #########################################################################
1764 xtract_incaip
= $(subst _100MHz
,,$(subst _133MHz
,,$(subst _150MHz
,,$(subst _config
,,$1))))
1766 incaip_100MHz_config \
1767 incaip_133MHz_config \
1768 incaip_150MHz_config \
1769 incaip_config
: unconfig
1771 @
[ -z
"$(findstring _100MHz,$@)" ] || \
1772 { echo
"#define CPU_CLOCK_RATE 100000000" >>include/config.h
; \
1773 echo
"... with 100MHz system clock" ; \
1775 @
[ -z
"$(findstring _133MHz,$@)" ] || \
1776 { echo
"#define CPU_CLOCK_RATE 133000000" >>include/config.h
; \
1777 echo
"... with 133MHz system clock" ; \
1779 @
[ -z
"$(findstring _150MHz,$@)" ] || \
1780 { echo
"#define CPU_CLOCK_RATE 150000000" >>include/config.h
; \
1781 echo
"... with 150MHz system clock" ; \
1783 @.
/mkconfig
-a
$(call xtract_incaip
,$@
) mips mips incaip
1785 tb0229_config
: unconfig
1786 @.
/mkconfig
$(@
:_config
=) mips mips tb0229
1788 #########################################################################
1790 #########################################################################
1791 dbau1000_config
: unconfig
1793 @echo
"#define CONFIG_DBAU1000 1" >>include/config.h
1794 @.
/mkconfig
-a dbau1x00 mips mips dbau1x00
1796 dbau1100_config
: unconfig
1798 @echo
"#define CONFIG_DBAU1100 1" >>include/config.h
1799 @.
/mkconfig
-a dbau1x00 mips mips dbau1x00
1801 dbau1500_config
: unconfig
1803 @echo
"#define CONFIG_DBAU1500 1" >>include/config.h
1804 @.
/mkconfig
-a dbau1x00 mips mips dbau1x00
1806 dbau1550_config
: unconfig
1808 @echo
"#define CONFIG_DBAU1550 1" >>include/config.h
1809 @.
/mkconfig
-a dbau1x00 mips mips dbau1x00
1811 dbau1550_el_config
: unconfig
1813 @echo
"#define CONFIG_DBAU1550 1" >>include/config.h
1814 @.
/mkconfig
-a dbau1x00 mips mips dbau1x00
1816 pb1000_config
: unconfig
1818 @echo
"#define CONFIG_PB1000 1" >>include/config.h
1819 @.
/mkconfig
-a pb1x00 mips mips pb1x00
1821 #########################################################################
1823 #########################################################################
1825 purple_config
: unconfig
1826 @.
/mkconfig
$(@
:_config
=) mips mips purple
1828 #========================================================================
1830 #========================================================================
1831 #########################################################################
1833 #########################################################################
1835 DK1C20_safe_32_config \
1836 DK1C20_standard_32_config \
1837 DK1C20_config
: unconfig
1839 @
[ -z
"$(findstring _safe_32,$@)" ] || \
1840 { echo
"#define CONFIG_NIOS_SAFE_32 1" >>include/config.h
; \
1841 echo
"... NIOS 'safe_32' configuration" ; \
1843 @
[ -z
"$(findstring _standard_32,$@)" ] || \
1844 { echo
"#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h
; \
1845 echo
"... NIOS 'standard_32' configuration" ; \
1847 @
[ -z
"$(findstring DK1C20_config,$@)" ] || \
1848 { echo
"#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h
; \
1849 echo
"... NIOS 'standard_32' configuration (DEFAULT)" ; \
1851 @.
/mkconfig
-a DK1C20 nios nios dk1c20 altera
1853 DK1S10_safe_32_config \
1854 DK1S10_standard_32_config \
1855 DK1S10_mtx_ldk_20_config \
1856 DK1S10_config
: unconfig
1858 @
[ -z
"$(findstring _safe_32,$@)" ] || \
1859 { echo
"#define CONFIG_NIOS_SAFE_32 1" >>include/config.h
; \
1860 echo
"... NIOS 'safe_32' configuration" ; \
1862 @
[ -z
"$(findstring _standard_32,$@)" ] || \
1863 { echo
"#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h
; \
1864 echo
"... NIOS 'standard_32' configuration" ; \
1866 @
[ -z
"$(findstring _mtx_ldk_20,$@)" ] || \
1867 { echo
"#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h
; \
1868 echo
"... NIOS 'mtx_ldk_20' configuration" ; \
1870 @
[ -z
"$(findstring DK1S10_config,$@)" ] || \
1871 { echo
"#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h
; \
1872 echo
"... NIOS 'standard_32' configuration (DEFAULT)" ; \
1874 @.
/mkconfig
-a DK1S10 nios nios dk1s10 altera
1876 ADNPESC1_DNPEVA2_base_32_config \
1877 ADNPESC1_base_32_config \
1878 ADNPESC1_config
: unconfig
1880 @
[ -z
"$(findstring _DNPEVA2,$@)" ] || \
1881 { echo
"#define CONFIG_DNPEVA2 1" >>include/config.h
; \
1882 echo
"... DNP/EVA2 configuration" ; \
1884 @
[ -z
"$(findstring _base_32,$@)" ] || \
1885 { echo
"#define CONFIG_NIOS_BASE_32 1" >>include/config.h
; \
1886 echo
"... NIOS 'base_32' configuration" ; \
1888 @
[ -z
"$(findstring ADNPESC1_config,$@)" ] || \
1889 { echo
"#define CONFIG_NIOS_BASE_32 1" >>include/config.h
; \
1890 echo
"... NIOS 'base_32' configuration (DEFAULT)" ; \
1892 @.
/mkconfig
-a ADNPESC1 nios nios adnpesc1 ssv
1894 #########################################################################
1896 #########################################################################
1898 PK1C20_config
: unconfig
1899 @.
/mkconfig PK1C20 nios2 nios2 pk1c20 psyent
1901 PCI5441_config
: unconfig
1902 @.
/mkconfig PCI5441 nios2 nios2 pci5441 psyent
1904 #========================================================================
1906 #========================================================================
1907 #########################################################################
1909 #########################################################################
1910 suzaku_config
: unconfig
1912 @echo
"#define CONFIG_SUZAKU 1" >> include/config.h
1913 @.
/mkconfig
-a
$(@
:_config
=) microblaze microblaze suzaku AtmarkTechno
1915 #########################################################################
1916 #########################################################################
1920 \
( -name
'core' -o
-name
'*.bak' -o
-name
'*~' \
1921 -o
-name
'*.o' -o
-name
'*.a' \
) -print \
1923 rm -f examples
/hello_world examples
/timer \
1924 examples
/eepro100_eeprom examples
/sched \
1925 examples
/mem_to_mem_idma2intr examples
/82559_eeprom \
1927 rm -f tools
/img2srec tools
/mkimage tools
/envcrc tools
/gen_eth_addr
1928 rm -f tools
/mpc86x_clk tools
/ncb
1929 rm -f tools
/easylogo
/easylogo tools
/bmp_logo
1930 rm -f tools
/gdb
/astest tools
/gdb
/gdbcont tools
/gdb
/gdbsend
1931 rm -f tools
/env
/fw_printenv tools
/env
/fw_setenv
1932 rm -f board
/cray
/L1
/bootscript.c board
/cray
/L1
/bootscript.image
1933 rm -f board
/trab
/trab_fkt board
/voiceblue
/eeprom
1936 find .
-type f \
( -name .depend \
1937 -o
-name
'*.srec' -o
-name
'*.bin' -o
-name u-boot.img \
) \
1940 rm -f
$(OBJS
) *.bak
tags TAGS
1942 rm -f u-boot u-boot.map u-boot.hex
$(ALL
)
1943 rm -f tools
/crc32.c tools
/environment.c tools
/env
/crc32.c
1944 rm -f tools
/inca-swap-bytes cpu
/mpc824x
/bedbug_603e.c
1945 rm -f
include/asm
/proc
include/asm
/arch
include/asm
1948 distclean: clobber unconfig
1951 F
=`basename $(TOPDIR)` ; cd ..
; \
1952 gtar
--force-local
-zcvf
`date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1954 #########################################################################