Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 11
  26 SUBLEVEL =
  27 EXTRAVERSION = -rc1
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 TAG_SUBDIRS += cpu/mpc8xxx
 234 endif
 235 ifeq ($(CPU),mpc86xx)
 236 LIBS += cpu/mpc8xxx/ddr/libddr.a
 237 LIBS += cpu/mpc8xxx/lib8xxx.a
 238 TAG_SUBDIRS += cpu/mpc8xxx
 239 endif
 240 LIBS += drivers/rtc/librtc.a
 241 LIBS += drivers/serial/libserial.a
 242 LIBS += drivers/twserial/libtws.a
 243 LIBS += drivers/usb/gadget/libusb_gadget.a
 244 LIBS += drivers/usb/host/libusb_host.a
 245 LIBS += drivers/usb/musb/libusb_musb.a
 246 LIBS += drivers/video/libvideo.a
 247 LIBS += drivers/watchdog/libwatchdog.a
 248 LIBS += common/libcommon.a
 249 LIBS += libfdt/libfdt.a
 250 LIBS += api/libapi.a
 251 LIBS += post/libpost.a
 252
 253 LIBS := $(addprefix $(obj),$(LIBS))
 254 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 255
 256 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 257 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 258
 259 # Add GCC lib
 260 ifdef USE_PRIVATE_LIBGCC
 261 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 262 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 263 else
 264 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 265 endif
 266 else
 267 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 268 endif
 269 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 270 export PLATFORM_LIBS
 271
 272 # Special flags for CPP when processing the linker script.
 273 # Pass the version down so we can handle backwards compatibility
 274 # on the fly.
 275 LDPPFLAGS += \
 276         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 277         $(shell $(LD) --version | \
 278           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 279
 280 ifeq ($(CONFIG_NAND_U_BOOT),y)
 281 NAND_SPL = nand_spl
 282 U_BOOT_NAND = $(obj)u-boot-nand.bin
 283 endif
 284
 285 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 286 ONENAND_IPL = onenand_ipl
 287 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 288 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 289 endif
 290
 291 __OBJS := $(subst $(obj),,$(OBJS))
 292 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 293
 294 #########################################################################
 295 #########################################################################
 296
 297 # Always append ALL so that arch config.mk's can add custom ones
 298 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 299
 300 all:            $(ALL)
 301
 302 $(obj)u-boot.hex:       $(obj)u-boot
 303                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 304
 305 $(obj)u-boot.srec:      $(obj)u-boot
 306                 $(OBJCOPY) -O srec $< $@
 307
 308 $(obj)u-boot.bin:       $(obj)u-boot
 309                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 310
 311 $(obj)u-boot.ldr:       $(obj)u-boot
 312                 $(obj)tools/envcrc --binary > $(obj)env-ldr.o
 313                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 314
 315 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 316                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 317
 318 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 319                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 320
 321 $(obj)u-boot.img:       $(obj)u-boot.bin
 322                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 323                 -a $(TEXT_BASE) -e 0 \
 324                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 325                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 326                 -d $< $@
 327
 328 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 329                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 330                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 331
 332 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 333                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 334
 335 $(obj)u-boot.dis:       $(obj)u-boot
 336                 $(OBJDUMP) -d $< > $@
 337
 338 GEN_UBOOT = \
 339                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 340                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 341                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 342                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 343                         -Map u-boot.map -o u-boot
 344 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 345                 $(GEN_UBOOT)
 346 ifeq ($(CONFIG_KALLSYMS),y)
 347                 smap=`$(call SYSTEM_MAP,u-boot) | \
 348                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 349                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 350                         -c common/system_map.c -o $(obj)common/system_map.o
 351                 $(GEN_UBOOT) $(obj)common/system_map.o
 352 endif
 353
 354 $(OBJS):        depend
 355                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 356
 357 $(LIBS):        depend $(SUBDIRS)
 358                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 359
 360 $(LIBBOARD):    depend $(LIBS)
 361                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 362
 363 $(SUBDIRS):     depend
 364                 $(MAKE) -C $@ all
 365
 366 $(LDSCRIPT):    depend
 367                 $(MAKE) -C $(dir $@) $(notdir $@)
 368
 369 $(obj)u-boot.lds: $(LDSCRIPT)
 370                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 371
 372 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 373                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 374
 375 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 376                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 377
 378 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 379                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 380
 381 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 382                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 383
 384 $(VERSION_FILE):
 385                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 386                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 387                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 388
 389 $(TIMESTAMP_FILE):
 390                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 391                 @date +'#define U_BOOT_TIME "%T"' >> $@
 392
 393 gdbtools:
 394                 $(MAKE) -C tools/gdb all || exit 1
 395
 396 updater:
 397                 $(MAKE) -C tools/updater all || exit 1
 398
 399 env:
 400                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 401
 402 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 403                 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 404
 405 TAG_SUBDIRS += include
 406 TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
 407 TAG_SUBDIRS += cpu/$(CPU)
 408 TAG_SUBDIRS += lib_$(ARCH)
 409 TAG_SUBDIRS += fs/cramfs
 410 TAG_SUBDIRS += fs/fat
 411 TAG_SUBDIRS += fs/fdos
 412 TAG_SUBDIRS += fs/jffs2
 413 TAG_SUBDIRS += fs/yaffs2
 414 TAG_SUBDIRS += net
 415 TAG_SUBDIRS += disk
 416 TAG_SUBDIRS += common
 417 TAG_SUBDIRS += drivers/bios_emulator
 418 TAG_SUBDIRS += drivers/block
 419 TAG_SUBDIRS += drivers/gpio
 420 TAG_SUBDIRS += drivers/hwmon
 421 TAG_SUBDIRS += drivers/i2c
 422 TAG_SUBDIRS += drivers/input
 423 TAG_SUBDIRS += drivers/misc
 424 TAG_SUBDIRS += drivers/mmc
 425 TAG_SUBDIRS += drivers/mtd
 426 TAG_SUBDIRS += drivers/mtd/nand
 427 TAG_SUBDIRS += drivers/mtd/onenand
 428 TAG_SUBDIRS += drivers/mtd/spi
 429 TAG_SUBDIRS += drivers/net
 430 TAG_SUBDIRS += drivers/net/sk98lin
 431 TAG_SUBDIRS += drivers/pci
 432 TAG_SUBDIRS += drivers/pcmcia
 433 TAG_SUBDIRS += drivers/qe
 434 TAG_SUBDIRS += drivers/rtc
 435 TAG_SUBDIRS += drivers/serial
 436 TAG_SUBDIRS += drivers/spi
 437 TAG_SUBDIRS += drivers/usb
 438 TAG_SUBDIRS += drivers/video
 439
 440 tags ctags:
 441                 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 442                                                 -name '*.[ch]' -print`
 443
 444 etags:
 445                 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 446                                                 -name '*.[ch]' -print`
 447 cscope:
 448                 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
 449                                                 > cscope.files
 450                 cscope -b -q -k
 451
 452 SYSTEM_MAP = \
 453                 $(NM) $1 | \
 454                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 455                 LC_ALL=C sort
 456 $(obj)System.map:       $(obj)u-boot
 457                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 458
 459 #
 460 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 461 #
 462 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 463 # the dep file is only include in this top level makefile to determine when
 464 # to regenerate the autoconf.mk file.
 465 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 466         @$(XECHO) Generating $@ ; \
 467         set -e ; \
 468         : Generate the dependancies ; \
 469         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 470                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 471
 472 $(obj)include/autoconf.mk: $(obj)include/config.h
 473         @$(XECHO) Generating $@ ; \
 474         set -e ; \
 475         : Extract the config macros ; \
 476         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 477                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 478         mv $@.tmp $@
 479
 480 #########################################################################
 481 else    # !config.mk
 482 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 483 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 484 $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 485 dep tags ctags etags cscope $(obj)System.map:
 486         @echo "System not configured - see README" >&2
 487         @ exit 1
 488 endif   # config.mk
 489
 490 .PHONY : CHANGELOG
 491 CHANGELOG:
 492         git log --no-merges U-Boot-1_1_5.. | \
 493         unexpand -a | sed -e 's/\s\s*$$//' > $@
 494
 495 include/license.h: tools/bin2header COPYING
 496          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 497 #########################################################################
 498
 499 unconfig:
 500         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 501                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 502                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 503
 504 %: %_config
 505         $(MAKE)
 506
 507 #========================================================================
 508 # PowerPC
 509 #========================================================================
 510
 511 #########################################################################
 512 ## MPC5xx Systems
 513 #########################################################################
 514
 515 canmb_config:   unconfig
 516         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 517
 518 cmi_mpc5xx_config:      unconfig
 519         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 520
 521 PATI_config:            unconfig
 522         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 523
 524 #########################################################################
 525 ## MPC5xxx Systems
 526 #########################################################################
 527
 528 aev_config: unconfig
 529         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 530
 531 BC3450_config:  unconfig
 532         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 533
 534 cm5200_config:  unconfig
 535         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 536
 537 cpci5200_config:  unconfig
 538         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 539
 540 digsy_mtc_config \
 541 digsy_mtc_LOWBOOT_config        \
 542 digsy_mtc_RAMBOOT_config:       unconfig
 543         @mkdir -p $(obj)include
 544         @mkdir -p $(obj)board/digsy_mtc
 545         @ >$(obj)include/config.h
 546         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 547                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 548                   echo "... with LOWBOOT configuration" ; \
 549                 }
 550         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 551                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 552                   echo "... with RAMBOOT configuration" ; \
 553                 }
 554         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 555
 556 galaxy5200_LOWBOOT_config \
 557 galaxy5200_config:      unconfig
 558         @mkdir -p $(obj)include
 559         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 560         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 561
 562 hmi1001_config: unconfig
 563         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 564
 565 Lite5200_config                         \
 566 Lite5200_LOWBOOT_config                 \
 567 Lite5200_LOWBOOT08_config               \
 568 icecube_5200_config                     \
 569 icecube_5200_LOWBOOT_config             \
 570 icecube_5200_LOWBOOT08_config           \
 571 icecube_5200_DDR_config                 \
 572 icecube_5200_DDR_LOWBOOT_config         \
 573 icecube_5200_DDR_LOWBOOT08_config       \
 574 icecube_5100_config:                    unconfig
 575         @mkdir -p $(obj)include
 576         @mkdir -p $(obj)board/icecube
 577         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 578                 { if [ "$(findstring DDR,$@)" ] ; \
 579                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 580                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 581                   fi ; \
 582                   $(XECHO) "... with LOWBOOT configuration" ; \
 583                 }
 584         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 585                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 586                   echo "... with 8 MB flash only" ; \
 587                   $(XECHO) "... with LOWBOOT configuration" ; \
 588                 }
 589         @[ -z "$(findstring DDR,$@)" ] || \
 590                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 591                   $(XECHO) "... DDR memory revision" ; \
 592                 }
 593         @[ -z "$(findstring 5200,$@)" ] || \
 594                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 595                   $(XECHO) "... with MPC5200 processor" ; \
 596                 }
 597         @[ -z "$(findstring 5100,$@)" ] || \
 598                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 599                   $(XECHO) "... with MGT5100 processor" ; \
 600                 }
 601         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 602
 603 jupiter_config: unconfig
 604         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 605
 606 inka4x0_config: unconfig
 607         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 608
 609 ipek01_config: unconfig
 610         @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
 611
 612 lite5200b_config        \
 613 lite5200b_PM_config     \
 614 lite5200b_LOWBOOT_config:       unconfig
 615         @mkdir -p $(obj)include
 616         @mkdir -p $(obj)board/icecube
 617         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 618         @ $(XECHO) "... DDR memory revision"
 619         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 620         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 621         @[ -z "$(findstring _PM_,$@)" ] || \
 622                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 623                   $(XECHO) "... with power management (low-power mode) support" ; \
 624                 }
 625         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 626                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 627                   $(XECHO) "... with LOWBOOT configuration" ; \
 628                 }
 629         @ $(XECHO) "... with MPC5200B processor"
 630         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 631
 632 mcc200_config   \
 633 mcc200_SDRAM_config     \
 634 mcc200_highboot_config  \
 635 mcc200_COM12_config     \
 636 mcc200_COM12_SDRAM_config       \
 637 mcc200_COM12_highboot_config    \
 638 mcc200_COM12_highboot_SDRAM_config      \
 639 mcc200_highboot_SDRAM_config    \
 640 prs200_config   \
 641 prs200_DDR_config       \
 642 prs200_highboot_config  \
 643 prs200_highboot_DDR_config:     unconfig
 644         @mkdir -p $(obj)include
 645         @mkdir -p $(obj)board/mcc200
 646         @[ -n "$(findstring highboot,$@)" ] || \
 647                 { $(XECHO) "... with lowboot configuration" ; \
 648                 }
 649         @[ -z "$(findstring highboot,$@)" ] || \
 650                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 651                   $(XECHO) "... with highboot configuration" ; \
 652                 }
 653         @[ -n "$(findstring _SDRAM,$@)" ] || \
 654                 { if [ -n "$(findstring mcc200,$@)" ]; \
 655                   then \
 656                         $(XECHO) "... with DDR" ; \
 657                   else \
 658                         if [ -n "$(findstring _DDR,$@)" ];\
 659                         then \
 660                                 $(XECHO) "... with DDR" ; \
 661                         else \
 662                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 663                                 $(XECHO) "... with SDRAM" ; \
 664                         fi; \
 665                   fi; \
 666                 }
 667         @[ -z "$(findstring _SDRAM,$@)" ] || \
 668                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 669                   $(XECHO) "... with SDRAM" ; \
 670                 }
 671         @[ -z "$(findstring COM12,$@)" ] || \
 672                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 673                   $(XECHO) "... with console on COM12" ; \
 674                 }
 675         @[ -z "$(findstring prs200,$@)" ] || \
 676                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 677                 }
 678         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 679
 680 mecp5200_config:  unconfig
 681         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 682
 683 motionpro_config:       unconfig
 684         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 685
 686 mucmc52_config:         unconfig
 687         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 688
 689 munices_config: unconfig
 690         @$(MKCONFIG) munices ppc mpc5xxx munices
 691
 692 MVBC_P_config: unconfig
 693         @mkdir -p $(obj)include
 694         @mkdir -p $(obj)board/mvbc_p
 695         @ >$(obj)include/config.h
 696         @[ -z "$(findstring MVBC_P,$@)" ] || \
 697         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 698         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 699
 700 o2dnt_config:   unconfig
 701         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 702
 703 pcm030_config \
 704 pcm030_LOWBOOT_config:  unconfig
 705         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 706         @ >$(obj)include/config.h
 707         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 708                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 709                   echo "... with LOWBOOT configuration" ; \
 710                 }
 711         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 712
 713 pf5200_config:  unconfig
 714         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 715
 716 PM520_config \
 717 PM520_DDR_config \
 718 PM520_ROMBOOT_config \
 719 PM520_ROMBOOT_DDR_config:       unconfig
 720         @mkdir -p $(obj)include
 721         @[ -z "$(findstring DDR,$@)" ] || \
 722                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 723                   $(XECHO) "... DDR memory revision" ; \
 724                 }
 725         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 726                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 727                   $(XECHO) "... booting from 8-bit flash" ; \
 728                 }
 729         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 730
 731 smmaco4_config: unconfig
 732         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 733
 734 spieval_config: unconfig
 735         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 736
 737 TB5200_B_config \
 738 TB5200_config:  unconfig
 739         @mkdir -p $(obj)include
 740         @[ -z "$(findstring _B,$@)" ] || \
 741                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 742                   $(XECHO) "... with MPC5200B processor" ; \
 743                 }
 744         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 745
 746 MINI5200_config \
 747 EVAL5200_config \
 748 TOP5200_config: unconfig
 749         @mkdir -p $(obj)include
 750         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 751         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 752
 753 Total5100_config                \
 754 Total5200_config                \
 755 Total5200_lowboot_config        \
 756 Total5200_Rev2_config           \
 757 Total5200_Rev2_lowboot_config:  unconfig
 758         @mkdir -p $(obj)include
 759         @mkdir -p $(obj)board/total5200
 760         @[ -z "$(findstring 5100,$@)" ] || \
 761                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 762                   $(XECHO) "... with MGT5100 processor" ; \
 763                 }
 764         @[ -z "$(findstring 5200,$@)" ] || \
 765                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 766                   $(XECHO) "... with MPC5200 processor" ; \
 767                 }
 768         @[ -n "$(findstring Rev,$@)" ] || \
 769                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 770                   $(XECHO) "... revision 1 board" ; \
 771                 }
 772         @[ -z "$(findstring Rev2_,$@)" ] || \
 773                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 774                   $(XECHO) "... revision 2 board" ; \
 775                 }
 776         @[ -z "$(findstring lowboot_,$@)" ] || \
 777                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 778                   $(XECHO) "... with lowboot configuration" ; \
 779                 }
 780         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 781
 782 cam5200_config \
 783 cam5200_niosflash_config \
 784 fo300_config \
 785 MiniFAP_config \
 786 TQM5200S_config \
 787 TQM5200S_HIGHBOOT_config \
 788 TQM5200_B_config \
 789 TQM5200_B_HIGHBOOT_config \
 790 TQM5200_config  \
 791 TQM5200_STK100_config:  unconfig
 792         @mkdir -p $(obj)include
 793         @mkdir -p $(obj)board/tqc/tqm5200
 794         @[ -z "$(findstring cam5200,$@)" ] || \
 795                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 796                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 797                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 798                   $(XECHO) "... TQM5200S on Cam5200" ; \
 799                 }
 800         @[ -z "$(findstring niosflash,$@)" ] || \
 801                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 802                   $(XECHO) "... with NIOS flash driver" ; \
 803                 }
 804         @[ -z "$(findstring fo300,$@)" ] || \
 805                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 806                   $(XECHO) "... TQM5200 on FO300" ; \
 807                 }
 808         @[ -z "$(findstring MiniFAP,$@)" ] || \
 809                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 810                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 811                 }
 812         @[ -z "$(findstring STK100,$@)" ] || \
 813                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 814                   $(XECHO) "... on a STK52XX.100 base board" ; \
 815                 }
 816         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 817                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 818                 }
 819         @[ -z "$(findstring TQM5200S,$@)" ] || \
 820                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 821                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 822                 }
 823         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 824                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 825                 }
 826         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 827
 828 uc101_config:           unconfig
 829         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 830
 831 v38b_config: unconfig
 832         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 833
 834 #########################################################################
 835 ## MPC512x Systems
 836 #########################################################################
 837
 838 aria_config:    unconfig
 839         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 840
 841 mecp5123_config:        unconfig
 842         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 843
 844 mpc5121ads_config \
 845 mpc5121ads_rev2_config  \
 846         : unconfig
 847         @mkdir -p $(obj)include
 848         @if [ "$(findstring rev2,$@)" ] ; then \
 849                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 850         fi
 851         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 852
 853 #########################################################################
 854 ## MPC8xx Systems
 855 #########################################################################
 856
 857 Adder_config    \
 858 Adder87x_config \
 859 AdderII_config  \
 860         :               unconfig
 861         @mkdir -p $(obj)include
 862         $(if $(findstring AdderII,$@), \
 863         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 864         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 865
 866 AdderUSB_config:        unconfig
 867         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 868
 869 ADS860_config     \
 870 FADS823_config    \
 871 FADS850SAR_config \
 872 MPC86xADS_config  \
 873 MPC885ADS_config  \
 874 FADS860T_config:        unconfig
 875         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 876
 877 AMX860_config   :       unconfig
 878         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 879
 880 c2mon_config:           unconfig
 881         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 882
 883 CCM_config:             unconfig
 884         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 885
 886 cogent_mpc8xx_config:   unconfig
 887         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 888
 889 ELPT860_config:         unconfig
 890         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 891
 892 EP88x_config:           unconfig
 893         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 894
 895 ESTEEM192E_config:      unconfig
 896         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 897
 898 ETX094_config   :       unconfig
 899         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 900
 901 FLAGADM_config: unconfig
 902         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 903
 904 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 905
 906 GEN860T_SC_config       \
 907 GEN860T_config: unconfig
 908         @mkdir -p $(obj)include
 909         @[ -z "$(findstring _SC,$@)" ] || \
 910                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 911                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 912                 }
 913         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 914
 915 GENIETV_config: unconfig
 916         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 917
 918 GTH_config:     unconfig
 919         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 920
 921 hermes_config   :       unconfig
 922         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 923
 924 HMI10_config    :       unconfig
 925         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 926
 927 IAD210_config: unconfig
 928         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 929
 930 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 931
 932 ICU862_100MHz_config    \
 933 ICU862_config: unconfig
 934         @mkdir -p $(obj)include
 935         @[ -z "$(findstring _100MHz,$@)" ] || \
 936                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 937                   $(XECHO) "... with 100MHz system clock" ; \
 938                 }
 939         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 940
 941 IP860_config    :       unconfig
 942         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 943
 944 IVML24_256_config \
 945 IVML24_128_config \
 946 IVML24_config:  unconfig
 947         @mkdir -p $(obj)include
 948         @[ -z "$(findstring IVML24_config,$@)" ] || \
 949                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 950                  }
 951         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 952                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 953                  }
 954         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 955                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 956                  }
 957         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 958
 959 IVMS8_256_config \
 960 IVMS8_128_config \
 961 IVMS8_config:   unconfig
 962         @mkdir -p $(obj)include
 963         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 964                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 965                  }
 966         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 967                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 968                  }
 969         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 970                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 971                  }
 972         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 973
 974 kmsupx4_config:         unconfig
 975         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 976
 977 KUP4K_config    :       unconfig
 978         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 979
 980 KUP4X_config    :       unconfig
 981         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 982
 983 LANTEC_config   :       unconfig
 984         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 985
 986 lwmon_config:           unconfig
 987         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 988
 989 MBX_config      \
 990 MBX860T_config: unconfig
 991         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 992
 993 mgsuvd_config:          unconfig
 994         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 995
 996 MHPC_config:            unconfig
 997         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 998
 999 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
1000
1001 NETVIA_V2_config \
1002 NETVIA_config:          unconfig
1003         @mkdir -p $(obj)include
1004         @[ -z "$(findstring NETVIA_config,$@)" ] || \
1005                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
1006                   $(XECHO) "... Version 1" ; \
1007                  }
1008         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
1009                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
1010                   $(XECHO) "... Version 2" ; \
1011                  }
1012         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
1013
1014 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
1015
1016 NETPHONE_V2_config \
1017 NETPHONE_config:        unconfig
1018         @mkdir -p $(obj)include
1019         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
1020                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
1021                  }
1022         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
1023                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
1024                  }
1025         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
1026
1027 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
1028
1029 NETTA_ISDN_6412_SWAPHOOK_config \
1030 NETTA_ISDN_SWAPHOOK_config \
1031 NETTA_6412_SWAPHOOK_config \
1032 NETTA_SWAPHOOK_config \
1033 NETTA_ISDN_6412_config \
1034 NETTA_ISDN_config \
1035 NETTA_6412_config \
1036 NETTA_config:           unconfig
1037         @mkdir -p $(obj)include
1038         @[ -z "$(findstring ISDN_,$@)" ] || \
1039                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1040                  }
1041         @[ -n "$(findstring ISDN_,$@)" ] || \
1042                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1043                  }
1044         @[ -z "$(findstring 6412_,$@)" ] || \
1045                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1046                  }
1047         @[ -n "$(findstring 6412_,$@)" ] || \
1048                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1049                  }
1050         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1051                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1052                  }
1053         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1054                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1055                  }
1056         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1057
1058 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1059
1060 NETTA2_V2_config \
1061 NETTA2_config:          unconfig
1062         @mkdir -p $(obj)include
1063         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1064                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1065                  }
1066         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1067                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1068                  }
1069         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1070
1071 NC650_Rev1_config \
1072 NC650_Rev2_config \
1073 CP850_config:   unconfig
1074         @mkdir -p $(obj)include
1075         @[ -z "$(findstring CP850,$@)" ] || \
1076                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1077                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1078                  }
1079         @[ -z "$(findstring Rev1,$@)" ] || \
1080                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1081                  }
1082         @[ -z "$(findstring Rev2,$@)" ] || \
1083                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1084                  }
1085         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1086
1087 NX823_config:           unconfig
1088         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1089
1090 pcu_e_config:           unconfig
1091         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1092
1093 QS850_config:   unconfig
1094         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1095
1096 QS823_config:   unconfig
1097         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1098
1099 QS860T_config:  unconfig
1100         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1101
1102 quantum_config: unconfig
1103         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1104
1105 R360MPI_config: unconfig
1106         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1107
1108 RBC823_config:  unconfig
1109         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1110
1111 RPXClassic_config:      unconfig
1112         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1113
1114 RPXlite_config:         unconfig
1115         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1116
1117 RPXlite_DW_64_config            \
1118 RPXlite_DW_LCD_config           \
1119 RPXlite_DW_64_LCD_config        \
1120 RPXlite_DW_NVRAM_config         \
1121 RPXlite_DW_NVRAM_64_config      \
1122 RPXlite_DW_NVRAM_LCD_config     \
1123 RPXlite_DW_NVRAM_64_LCD_config  \
1124 RPXlite_DW_config:      unconfig
1125         @mkdir -p $(obj)include
1126         @[ -z "$(findstring _64,$@)" ] || \
1127                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1128                   $(XECHO) "... with 64MHz system clock ..."; \
1129                 }
1130         @[ -z "$(findstring _LCD,$@)" ] || \
1131                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1132                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1133                   $(XECHO) "... with LCD display ..."; \
1134                 }
1135         @[ -z "$(findstring _NVRAM,$@)" ] || \
1136                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1137                   $(XECHO) "... with ENV in NVRAM ..."; \
1138                 }
1139         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1140
1141 rmu_config:     unconfig
1142         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1143
1144 RRvision_config:        unconfig
1145         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1146
1147 RRvision_LCD_config:    unconfig
1148         @mkdir -p $(obj)include
1149         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1150         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1151         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1152
1153 SM850_config    :       unconfig
1154         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1155
1156 spc1920_config:         unconfig
1157         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1158
1159 SPD823TS_config:        unconfig
1160         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1161
1162 stxxtc_config:  unconfig
1163         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1164
1165 svm_sc8xx_config:       unconfig
1166         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1167
1168 SXNI855T_config:        unconfig
1169         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1170
1171 # EMK MPC8xx based modules
1172 TOP860_config:          unconfig
1173         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1174
1175 # Play some tricks for configuration selection
1176 # Only 855 and 860 boards may come with FEC
1177 # and only 823 boards may have LCD support
1178 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1179
1180 FPS850L_config          \
1181 FPS860L_config          \
1182 NSCU_config             \
1183 TQM823L_config          \
1184 TQM823L_LCD_config      \
1185 TQM850L_config          \
1186 TQM855L_config          \
1187 TQM860L_config          \
1188 TQM862L_config          \
1189 TQM823M_config          \
1190 TQM850M_config          \
1191 TQM855M_config          \
1192 TQM860M_config          \
1193 TQM862M_config          \
1194 TQM866M_config          \
1195 TQM885D_config          \
1196 TK885D_config           \
1197 virtlab2_config:        unconfig
1198         @mkdir -p $(obj)include
1199         @[ -z "$(findstring _LCD,$@)" ] || \
1200                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1201                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1202                   $(XECHO) "... with LCD display" ; \
1203                 }
1204         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1205
1206 TTTech_config:  unconfig
1207         @mkdir -p $(obj)include
1208         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1209         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1210         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1211
1212 uc100_config    :       unconfig
1213         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1214
1215 v37_config:     unconfig
1216         @mkdir -p $(obj)include
1217         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1218         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1219         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1220
1221 wtk_config:     unconfig
1222         @mkdir -p $(obj)include
1223         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1224         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1225         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1226
1227 #########################################################################
1228 ## PPC4xx Systems
1229 #########################################################################
1230 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1231
1232 acadia_config:  unconfig
1233         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1234
1235 acadia_nand_config:     unconfig
1236         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1237         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1238         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1239         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1240         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1241         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1242
1243 ADCIOP_config:  unconfig
1244         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1245
1246 alpr_config:    unconfig
1247         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1248
1249 AP1000_config:unconfig
1250         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1251
1252 APC405_config:  unconfig
1253         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1254
1255 AR405_config:   unconfig
1256         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1257
1258 ASH405_config:  unconfig
1259         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1260
1261 bamboo_config:  unconfig
1262         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1263
1264 bamboo_nand_config:     unconfig
1265         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1266         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1267         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1268         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1269         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1270         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1271
1272 bubinga_config: unconfig
1273         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1274
1275 CANBT_config:   unconfig
1276         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1277
1278 # Arches, Canyonlands & Glacier use different U-Boot images
1279 arches_config \
1280 canyonlands_config \
1281 glacier_config: unconfig
1282         @mkdir -p $(obj)include
1283         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1284                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1285         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1286
1287 canyonlands_nand_config \
1288 glacier_nand_config:    unconfig
1289         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1290         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1291         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1292         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1293                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1294         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1295         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1296         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1297
1298 CATcenter_config        \
1299 CATcenter_25_config     \
1300 CATcenter_33_config:    unconfig
1301         @mkdir -p $(obj)include
1302         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1303         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1304         @[ -z "$(findstring _25,$@)" ] || \
1305                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1306                   $(XECHO) "SysClk = 25MHz" ; \
1307                 }
1308         @[ -z "$(findstring _33,$@)" ] || \
1309                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1310                   $(XECHO) "SysClk = 33MHz" ; \
1311                 }
1312         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1313
1314 CMS700_config:  unconfig
1315         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1316
1317 CPCI2DP_config: unconfig
1318         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1319
1320 CPCI405_config          \
1321 CPCI4052_config         \
1322 CPCI405DT_config        \
1323 CPCI405AB_config:       unconfig
1324         @mkdir -p $(obj)board/esd/cpci405
1325         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1326
1327 CPCIISER4_config:       unconfig
1328         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1329
1330 CRAYL1_config:  unconfig
1331         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1332
1333 csb272_config:  unconfig
1334         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1335
1336 csb472_config:  unconfig
1337         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1338
1339 DASA_SIM_config: unconfig
1340         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1341
1342 dlvision_config: unconfig
1343         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1344
1345 DP405_config:   unconfig
1346         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1347
1348 DU405_config:   unconfig
1349         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1350
1351 DU440_config:   unconfig
1352         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1353
1354 ebony_config:   unconfig
1355         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1356
1357 ERIC_config:    unconfig
1358         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1359
1360 EXBITGEN_config:        unconfig
1361         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1362
1363 fx12mm_flash_config: unconfig
1364         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1365         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1366         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1367                 > $(obj)board/avnet/fx12mm/config.tmp
1368         @echo "TEXT_BASE := 0xFFCB0000" \
1369                 >> $(obj)board/avnet/fx12mm/config.tmp
1370         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1371
1372 fx12mm_config: unconfig
1373         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1374         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1375         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1376                 > $(obj)board/avnet/fx12mm/config.tmp
1377         @echo "TEXT_BASE := 0x03000000" \
1378                 >> $(obj)board/avnet/fx12mm/config.tmp
1379         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1380
1381 G2000_config:   unconfig
1382         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1383
1384 gdppc440etx_config:     unconfig
1385         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1386
1387 hcu4_config:    unconfig
1388         @mkdir -p $(obj)board/netstal/common
1389         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1390
1391 hcu5_config:    unconfig
1392         @mkdir -p $(obj)board/netstal/common
1393         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1394
1395 HH405_config:   unconfig
1396         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1397
1398 HUB405_config:  unconfig
1399         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1400
1401 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1402 intip_config \
1403 devconcenter_config:    unconfig
1404         @mkdir -p $(obj)include
1405         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1406                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1407         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1408
1409 JSE_config:     unconfig
1410         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1411
1412 KAREF_config: unconfig
1413         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1414
1415 katmai_config:  unconfig
1416         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1417
1418 # Kilauea & Haleakala images are identical (recognized via PVR)
1419 kilauea_config \
1420 haleakala_config: unconfig
1421         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1422
1423 kilauea_nand_config \
1424 haleakala_nand_config: unconfig
1425         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1426         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1427         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1428         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1429         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1430         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1431
1432 korat_config:   unconfig
1433         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1434
1435 luan_config:    unconfig
1436         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1437
1438 lwmon5_config:  unconfig
1439         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1440
1441 makalu_config:  unconfig
1442         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1443
1444 mcu25_config:  unconfig
1445         @mkdir -p $(obj)board/netstal/common
1446         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1447
1448 METROBOX_config: unconfig
1449         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1450
1451 MIP405_config:  unconfig
1452         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1453
1454 MIP405T_config: unconfig
1455         @mkdir -p $(obj)include
1456         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1457         @$(XECHO) "Enable subset config for MIP405T"
1458         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1459
1460 ML2_config:     unconfig
1461         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1462
1463 ml300_config:   unconfig
1464         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1465
1466 ml507_flash_config: unconfig
1467         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1468         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1469         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1470                 > $(obj)board/xilinx/ml507/config.tmp
1471         @echo "TEXT_BASE := 0xFE360000" \
1472                 >> $(obj)board/xilinx/ml507/config.tmp
1473         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1474
1475 ml507_config: unconfig
1476         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1477         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1478         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1479                 > $(obj)board/xilinx/ml507/config.tmp
1480         @echo "TEXT_BASE := 0x04000000"  \
1481                 >> $(obj)board/xilinx/ml507/config.tmp
1482         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1483
1484 neo_config:     unconfig
1485         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1486
1487 ocotea_config:  unconfig
1488         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1489
1490 OCRTC_config            \
1491 ORSG_config:    unconfig
1492         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1493
1494 p3p440_config:  unconfig
1495         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1496
1497 PCI405_config:  unconfig
1498         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1499
1500 pcs440ep_config:        unconfig
1501         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1502
1503 PIP405_config:  unconfig
1504         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1505
1506 PLU405_config:  unconfig
1507         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1508
1509 PMC405_config:  unconfig
1510         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1511
1512 PMC405DE_config:        unconfig
1513         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1514
1515 PMC440_config:  unconfig
1516         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1517
1518 PPChameleonEVB_config           \
1519 PPChameleonEVB_BA_25_config     \
1520 PPChameleonEVB_ME_25_config     \
1521 PPChameleonEVB_HI_25_config     \
1522 PPChameleonEVB_BA_33_config     \
1523 PPChameleonEVB_ME_33_config     \
1524 PPChameleonEVB_HI_33_config:    unconfig
1525         @mkdir -p $(obj)include
1526         @[ -z "$(findstring EVB_BA,$@)" ] || \
1527                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1528                   $(XECHO) "... BASIC model" ; \
1529                 }
1530         @[ -z "$(findstring EVB_ME,$@)" ] || \
1531                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1532                   $(XECHO) "... MEDIUM model" ; \
1533                 }
1534         @[ -z "$(findstring EVB_HI,$@)" ] || \
1535                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1536                   $(XECHO) "... HIGH-END model" ; \
1537                 }
1538         @[ -z "$(findstring _25,$@)" ] || \
1539                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1540                   $(XECHO) "SysClk = 25MHz" ; \
1541                 }
1542         @[ -z "$(findstring _33,$@)" ] || \
1543                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1544                   $(XECHO) "SysClk = 33MHz" ; \
1545                 }
1546         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1547
1548 quad100hd_config:       unconfig
1549         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1550
1551 redwood_config: unconfig
1552         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1553
1554 sbc405_config:  unconfig
1555         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1556
1557 sc3_config:unconfig
1558         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1559
1560 sequoia_config \
1561 rainier_config: unconfig
1562         @mkdir -p $(obj)include
1563         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1564                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1565         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1566
1567 sequoia_nand_config \
1568 rainier_nand_config: unconfig
1569         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1570         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1571         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1572         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1573                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1574         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1575         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1576         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1577
1578 sequoia_ramboot_config \
1579 rainier_ramboot_config: unconfig
1580         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1581         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1582         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1583                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1584         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1585         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1586         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1587                 $(obj)board/amcc/sequoia/config.tmp
1588
1589 taihu_config:   unconfig
1590         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1591
1592 taishan_config: unconfig
1593         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1594
1595 v5fx30teval_config: unconfig
1596         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1597         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1598         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1599                 > $(obj)board/avnet/v5fx30teval/config.tmp
1600         @echo "TEXT_BASE := 0x03000000" \
1601                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1602         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1603
1604 v5fx30teval_flash_config: unconfig
1605         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1606         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1607         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1608                 > $(obj)board/avnet/v5fx30teval/config.tmp
1609         @echo "TEXT_BASE := 0xFF1C0000" \
1610                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1611         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1612
1613 VOH405_config:  unconfig
1614         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1615
1616 VOM405_config:  unconfig
1617         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1618
1619 W7OLMC_config   \
1620 W7OLMG_config: unconfig
1621         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1622
1623 # Walnut & Sycamore images are identical (recognized via PVR)
1624 walnut_config \
1625 sycamore_config: unconfig
1626         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1627
1628 WUH405_config:  unconfig
1629         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1630
1631 xilinx-ppc405-generic_flash_config: unconfig
1632         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1633         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1634                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1635         @echo "TEXT_BASE := 0xFE360000" \
1636                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1637         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1638
1639 xilinx-ppc405-generic_config: unconfig
1640         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1641         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1642                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1643         @echo "TEXT_BASE := 0x04000000" \
1644                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1645         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1646
1647 xilinx-ppc440-generic_flash_config: unconfig
1648         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1649         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1650                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1651         @echo "TEXT_BASE := 0xFE360000" \
1652                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1653         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1654
1655 xilinx-ppc440-generic_config: unconfig
1656         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1657         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1658                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1659         @echo "TEXT_BASE := 0x04000000" \
1660                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1661         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1662
1663 XPEDITE1000_config:     unconfig
1664         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1665
1666 yosemite_config \
1667 yellowstone_config: unconfig
1668         @mkdir -p $(obj)include
1669         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1670                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1671         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1672
1673 yucca_config:   unconfig
1674         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1675
1676 zeus_config:    unconfig
1677         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1678
1679 #########################################################################
1680 ## MPC8220 Systems
1681 #########################################################################
1682
1683 Alaska8220_config       \
1684 Yukon8220_config:       unconfig
1685         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1686
1687 sorcery_config:         unconfig
1688         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1689
1690 #########################################################################
1691 ## MPC824x Systems
1692 #########################################################################
1693 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1694
1695 A3000_config: unconfig
1696         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1697
1698 barco_config: unconfig
1699         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1700
1701 BMW_config: unconfig
1702         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1703
1704 CPC45_config    \
1705 CPC45_ROMBOOT_config:   unconfig
1706         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1707         @cd $(obj)include ;                             \
1708         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1709                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1710                 $(XECHO) "... booting from 8-bit flash" ; \
1711         else \
1712                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1713                 $(XECHO) "... booting from 64-bit flash" ; \
1714         fi; \
1715         echo "export CONFIG_BOOT_ROM" >> config.mk;
1716
1717 CU824_config: unconfig
1718         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1719
1720 debris_config: unconfig
1721         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1722
1723 eXalion_config: unconfig
1724         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1725
1726 HIDDEN_DRAGON_config: unconfig
1727         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1728
1729 kvme080_config: unconfig
1730         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1731
1732 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1733 # time permits.
1734 #linkstation_HDLAN_config \
1735 # Remove this line when HDLAN is fixed
1736 linkstation_HGLAN_config: unconfig
1737         @mkdir -p $(obj)include
1738         @case $@ in \
1739                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1740                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1741         esac
1742         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1743
1744 MOUSSE_config: unconfig
1745         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1746
1747 MUSENKI_config: unconfig
1748         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1749
1750 MVBLUE_config:  unconfig
1751         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1752
1753 OXC_config: unconfig
1754         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1755
1756 PN62_config: unconfig
1757         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1758
1759 Sandpoint8240_config: unconfig
1760         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1761
1762 Sandpoint8245_config: unconfig
1763         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1764
1765 sbc8240_config: unconfig
1766         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1767
1768 SL8245_config: unconfig
1769         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1770
1771 utx8245_config: unconfig
1772         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1773
1774 #########################################################################
1775 ## MPC8260 Systems
1776 #########################################################################
1777
1778 atc_config:     unconfig
1779         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1780
1781 cogent_mpc8260_config:  unconfig
1782         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1783
1784 CPU86_config    \
1785 CPU86_ROMBOOT_config: unconfig
1786         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1787         @cd $(obj)include ;                             \
1788         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1789                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1790                 $(XECHO) "... booting from 8-bit flash" ; \
1791         else \
1792                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1793                 $(XECHO) "... booting from 64-bit flash" ; \
1794         fi; \
1795         echo "export CONFIG_BOOT_ROM" >> config.mk;
1796
1797 CPU87_config    \
1798 CPU87_ROMBOOT_config: unconfig
1799         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1800         @cd $(obj)include ;                             \
1801         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1802                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1803                 $(XECHO) "... booting from 8-bit flash" ; \
1804         else \
1805                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1806                 $(XECHO) "... booting from 64-bit flash" ; \
1807         fi; \
1808         echo "export CONFIG_BOOT_ROM" >> config.mk;
1809
1810 ep8248_config   \
1811 ep8248E_config  :       unconfig
1812         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1813
1814 ep8260_config:  unconfig
1815         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1816
1817 ep82xxm_config: unconfig
1818         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1819
1820 gw8260_config:  unconfig
1821         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1822
1823 hymod_config:   unconfig
1824         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1825
1826 IDS8247_config: unconfig
1827         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1828
1829 IPHASE4539_config:      unconfig
1830         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1831
1832 ISPAN_config            \
1833 ISPAN_REVB_config:      unconfig
1834         @mkdir -p $(obj)include
1835         @if [ "$(findstring _REVB_,$@)" ] ; then \
1836                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1837         fi
1838         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1839
1840 mgcoge_config   :       unconfig
1841         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1842
1843 MPC8260ADS_config       \
1844 MPC8260ADS_lowboot_config       \
1845 MPC8260ADS_33MHz_config \
1846 MPC8260ADS_33MHz_lowboot_config \
1847 MPC8260ADS_40MHz_config \
1848 MPC8260ADS_40MHz_lowboot_config \
1849 MPC8272ADS_config       \
1850 MPC8272ADS_lowboot_config       \
1851 PQ2FADS_config          \
1852 PQ2FADS_lowboot_config          \
1853 PQ2FADS-VR_config       \
1854 PQ2FADS-VR_lowboot_config       \
1855 PQ2FADS-ZU_config       \
1856 PQ2FADS-ZU_lowboot_config       \
1857 PQ2FADS-ZU_66MHz_config \
1858 PQ2FADS-ZU_66MHz_lowboot_config \
1859         :               unconfig
1860         @mkdir -p $(obj)include
1861         @mkdir -p $(obj)board/freescale/mpc8260ads
1862         $(if $(findstring PQ2FADS,$@), \
1863         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1864         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1865         $(if $(findstring MHz,$@), \
1866         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1867         $(if $(findstring VR,$@), \
1868         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1869         @[ -z "$(findstring lowboot_,$@)" ] || \
1870                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1871                   $(XECHO) "... with lowboot configuration" ; \
1872                 }
1873         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1874
1875 MPC8266ADS_config:      unconfig
1876         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1877
1878 muas3001_dev_config \
1879 muas3001_config :       unconfig
1880         @mkdir -p $(obj)include
1881         @mkdir -p $(obj)board/muas3001
1882         @if [ "$(findstring dev,$@)" ] ; then \
1883                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1884         fi
1885         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1886
1887 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1888 PM825_config    \
1889 PM825_ROMBOOT_config    \
1890 PM825_BIGFLASH_config   \
1891 PM825_ROMBOOT_BIGFLASH_config   \
1892 PM826_config    \
1893 PM826_ROMBOOT_config    \
1894 PM826_BIGFLASH_config   \
1895 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1896         @mkdir -p $(obj)include
1897         @mkdir -p $(obj)board/pm826
1898         @if [ "$(findstring PM825_,$@)" ] ; then \
1899                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1900         else \
1901                 >$(obj)include/config.h ; \
1902         fi
1903         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1904                 $(XECHO) "... booting from 8-bit flash" ; \
1905                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1906                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1907                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1908                         $(XECHO) "... with 32 MB Flash" ; \
1909                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1910                 fi; \
1911         else \
1912                 $(XECHO) "... booting from 64-bit flash" ; \
1913                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1914                         $(XECHO) "... with 32 MB Flash" ; \
1915                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1916                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1917                 else \
1918                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1919                 fi; \
1920         fi
1921         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1922
1923 PM828_config    \
1924 PM828_PCI_config        \
1925 PM828_ROMBOOT_config    \
1926 PM828_ROMBOOT_PCI_config:       unconfig
1927         @mkdir -p $(obj)include
1928         @mkdir -p $(obj)board/pm826
1929         @if [ "$(findstring _PCI_,$@)" ] ; then \
1930                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1931                 $(XECHO) "... with PCI enabled" ; \
1932         fi
1933         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1934                 $(XECHO) "... booting from 8-bit flash" ; \
1935                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1936                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1937         fi
1938         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1939
1940 ppmc8260_config:        unconfig
1941         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1942
1943 Rattler8248_config      \
1944 Rattler_config:         unconfig
1945         @mkdir -p $(obj)include
1946         $(if $(findstring 8248,$@), \
1947         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1948         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1949
1950 RPXsuper_config:        unconfig
1951         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1952
1953 rsdproto_config:        unconfig
1954         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1955
1956 sacsng_config:  unconfig
1957         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1958
1959 sbc8260_config: unconfig
1960         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1961
1962 SCM_config:             unconfig
1963         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1964
1965 TQM8255_AA_config \
1966 TQM8260_AA_config \
1967 TQM8260_AB_config \
1968 TQM8260_AC_config \
1969 TQM8260_AD_config \
1970 TQM8260_AE_config \
1971 TQM8260_AF_config \
1972 TQM8260_AG_config \
1973 TQM8260_AH_config \
1974 TQM8260_AI_config \
1975 TQM8265_AA_config:  unconfig
1976         @mkdir -p $(obj)include
1977         @case "$@" in \
1978         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1979         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1980         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1981         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1982         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1983         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1984         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1985         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1986         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1987         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1988         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1989         esac; \
1990         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1991                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1992         fi; \
1993         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1994         echo "... with $${CFREQ}MHz system clock" ; \
1995         if [ "$${CACHE}" = "yes" ] ; then \
1996                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1997                 $(XECHO) "... with L2 Cache support" ; \
1998         else \
1999                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
2000                 $(XECHO) "... without L2 Cache support" ; \
2001         fi; \
2002         if [ "$${BMODE}" = "60x" ] ; then \
2003                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
2004                 $(XECHO) "... with 60x Bus Mode" ; \
2005         else \
2006                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
2007                 $(XECHO) "... without 60x Bus Mode" ; \
2008         fi
2009         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
2010
2011 TQM8272_config: unconfig
2012         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
2013
2014 VoVPN-GW_66MHz_config   \
2015 VoVPN-GW_100MHz_config:         unconfig
2016         @mkdir -p $(obj)include
2017         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
2018         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
2019
2020 ZPC1900_config: unconfig
2021         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
2022
2023 #########################################################################
2024 ## Coldfire
2025 #########################################################################
2026
2027 M5208EVBE_config :              unconfig
2028         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
2029
2030 M52277EVB_config \
2031 M52277EVB_spansion_config \
2032 M52277EVB_stmicro_config :      unconfig
2033         @case "$@" in \
2034         M52277EVB_config)               FLASH=SPANSION;; \
2035         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2036         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2037         esac; \
2038         if [ "$${FLASH}" = "SPANSION" ] ; then \
2039                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2040                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2041                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2042                 $(XECHO) "... with SPANSION boot..." ; \
2043         fi; \
2044         if [ "$${FLASH}" = "STMICRO" ] ; then \
2045                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2046                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2047                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2048                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2049                 $(XECHO) "... with ST Micro boot..." ; \
2050         fi
2051         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2052
2053 M5235EVB_config \
2054 M5235EVB_Flash16_config \
2055 M5235EVB_Flash32_config:        unconfig
2056         @case "$@" in \
2057         M5235EVB_config)                FLASH=16;; \
2058         M5235EVB_Flash16_config)        FLASH=16;; \
2059         M5235EVB_Flash32_config)        FLASH=32;; \
2060         esac; \
2061         if [ "$${FLASH}" != "16" ] ; then \
2062                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2063                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2064                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2065         else \
2066                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2067                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2068         fi
2069         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2070
2071 M5249EVB_config :               unconfig
2072         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2073
2074 M5253DEMO_config :              unconfig
2075         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2076
2077 M5253EVBE_config :              unconfig
2078         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2079
2080 cobra5272_config :              unconfig
2081         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2082
2083 EB+MCF-EV123_config :           unconfig
2084         @mkdir -p $(obj)include
2085         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2086         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2087         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2088
2089 EB+MCF-EV123_internal_config :  unconfig
2090         @mkdir -p $(obj)include
2091         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2092         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2093         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2094
2095 idmr_config :                   unconfig
2096         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2097
2098 M5271EVB_config :               unconfig
2099         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2100
2101 M5272C3_config :                unconfig
2102         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2103
2104 M5275EVB_config :               unconfig
2105         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2106
2107 M5282EVB_config :               unconfig
2108         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2109
2110 M53017EVB_config :              unconfig
2111         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2112
2113 M5329AFEE_config \
2114 M5329BFEE_config :      unconfig
2115         @case "$@" in \
2116         M5329AFEE_config)       NAND=0;; \
2117         M5329BFEE_config)       NAND=16;; \
2118         esac; \
2119         if [ "$${NAND}" != "0" ] ; then \
2120                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2121         fi
2122         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2123
2124 M5373EVB_config :       unconfig
2125         @case "$@" in \
2126         M5373EVB_config)        NAND=16;; \
2127         esac; \
2128         if [ "$${NAND}" != "0" ] ; then \
2129                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2130         fi
2131         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2132
2133 M54451EVB_config \
2134 M54451EVB_stmicro_config :      unconfig
2135         @case "$@" in \
2136         M54451EVB_config)               FLASH=NOR;; \
2137         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2138         esac; \
2139         if [ "$${FLASH}" = "NOR" ] ; then \
2140                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2141                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2142                 $(XECHO) "... with NOR boot..." ; \
2143         fi; \
2144         if [ "$${FLASH}" = "STMICRO" ] ; then \
2145                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2146                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2147                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2148                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2149                 $(XECHO) "... with ST Micro boot..." ; \
2150         fi; \
2151         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2152         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2153
2154 M54455EVB_config \
2155 M54455EVB_atmel_config \
2156 M54455EVB_intel_config \
2157 M54455EVB_a33_config \
2158 M54455EVB_a66_config \
2159 M54455EVB_i33_config \
2160 M54455EVB_i66_config \
2161 M54455EVB_stm33_config :        unconfig
2162         @case "$@" in \
2163         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2164         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2165         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2166         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2167         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2168         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2169         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2170         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2171         esac; \
2172         if [ "$${FLASH}" = "INTEL" ] ; then \
2173                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2174                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2175                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2176                 $(XECHO) "... with INTEL boot..." ; \
2177         fi; \
2178         if [ "$${FLASH}" = "ATMEL" ] ; then \
2179                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2180                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2181                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2182                 $(XECHO) "... with ATMEL boot..." ; \
2183         fi; \
2184         if [ "$${FLASH}" = "STMICRO" ] ; then \
2185                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2186                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2187                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2188                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2189                 $(XECHO) "... with ST Micro boot..." ; \
2190         fi; \
2191         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2192         $(XECHO) "... with $${FREQ}Hz input clock"
2193         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2194
2195 M5475AFE_config \
2196 M5475BFE_config \
2197 M5475CFE_config \
2198 M5475DFE_config \
2199 M5475EFE_config \
2200 M5475FFE_config \
2201 M5475GFE_config :       unconfig
2202         @case "$@" in \
2203         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2204         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2205         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2206         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2207         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2208         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2209         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2210         esac; \
2211         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2212         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2213         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2214         if [ "$${RAM1}" != "0" ] ; then \
2215                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2216         fi; \
2217         if [ "$${CODE}" != "0" ] ; then \
2218                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2219         fi; \
2220         if [ "$${VID}" == "1" ] ; then \
2221                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2222         fi; \
2223         if [ "$${USB}" == "1" ] ; then \
2224                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2225         fi
2226         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2227
2228 M5485AFE_config \
2229 M5485BFE_config \
2230 M5485CFE_config \
2231 M5485DFE_config \
2232 M5485EFE_config \
2233 M5485FFE_config \
2234 M5485GFE_config \
2235 M5485HFE_config :       unconfig
2236         @case "$@" in \
2237         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2238         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2239         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2240         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2241         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2242         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2243         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2244         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2245         esac; \
2246         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2247         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2248         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2249         if [ "$${RAM1}" != "0" ] ; then \
2250                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2251         fi; \
2252         if [ "$${CODE}" != "0" ] ; then \
2253                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2254         fi; \
2255         if [ "$${VID}" == "1" ] ; then \
2256                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2257         fi; \
2258         if [ "$${USB}" == "1" ] ; then \
2259                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2260         fi
2261         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2262
2263 TASREG_config :         unconfig
2264         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2265
2266 #########################################################################
2267 ## MPC83xx Systems
2268 #########################################################################
2269
2270 kmeter1_config: unconfig
2271         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2272
2273 MPC8313ERDB_33_config \
2274 MPC8313ERDB_66_config \
2275 MPC8313ERDB_NAND_33_config \
2276 MPC8313ERDB_NAND_66_config: unconfig
2277         @mkdir -p $(obj)include
2278         @mkdir -p $(obj)board/freescale/mpc8313erdb
2279         @if [ "$(findstring _33_,$@)" ] ; then \
2280                 $(XECHO) -n "...33M ..." ; \
2281                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2282         fi ; \
2283         if [ "$(findstring _66_,$@)" ] ; then \
2284                 $(XECHO) -n "...66M..." ; \
2285                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2286         fi ; \
2287         if [ "$(findstring _NAND_,$@)" ] ; then \
2288                 $(XECHO) -n "...NAND..." ; \
2289                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2290                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2291         fi ;
2292         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2293         @if [ "$(findstring _NAND_,$@)" ] ; then \
2294                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2295         fi ;
2296
2297 MPC8315ERDB_config: unconfig
2298         @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2299
2300 MPC8323ERDB_config:     unconfig
2301         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2302
2303 MPC832XEMDS_config \
2304 MPC832XEMDS_HOST_33_config \
2305 MPC832XEMDS_HOST_66_config \
2306 MPC832XEMDS_SLAVE_config \
2307 MPC832XEMDS_ATM_config: unconfig
2308         @mkdir -p $(obj)include
2309         @if [ "$(findstring _HOST_,$@)" ] ; then \
2310                 $(XECHO) -n "... PCI HOST " ; \
2311                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2312         fi ; \
2313         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2314                 $(XECHO) "...PCI SLAVE 66M"  ; \
2315                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2316                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2317         fi ; \
2318         if [ "$(findstring _33_,$@)" ] ; then \
2319                 $(XECHO) -n "...33M ..." ; \
2320                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2321                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2322         fi ; \
2323         if [ "$(findstring _66_,$@)" ] ; then \
2324                 $(XECHO) -n "...66M..." ; \
2325                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2326                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2327         fi ; \
2328         if [ "$(findstring _ATM_,$@)" ] ; then \
2329                 $(XECHO) -n "...ATM..." ; \
2330                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2331                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2332         fi ;
2333         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2334
2335 MPC8349EMDS_config:     unconfig
2336         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2337
2338 MPC8349ITX_config \
2339 MPC8349ITX_LOWBOOT_config \
2340 MPC8349ITXGP_config:    unconfig
2341         @mkdir -p $(obj)include
2342         @mkdir -p $(obj)board/freescale/mpc8349itx
2343         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2344         @if [ "$(findstring GP,$@)" ] ; then \
2345                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2346         fi
2347         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2348                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2349         fi
2350         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2351
2352 MPC8360EMDS_config \
2353 MPC8360EMDS_HOST_33_config \
2354 MPC8360EMDS_HOST_66_config \
2355 MPC8360EMDS_SLAVE_config \
2356 MPC8360EMDS_ATM_config: unconfig
2357         @mkdir -p $(obj)include
2358         @if [ "$(findstring _HOST_,$@)" ] ; then \
2359                 $(XECHO) -n "... PCI HOST " ; \
2360                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2361         fi ; \
2362         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2363                 $(XECHO) "...PCI SLAVE 66M"  ; \
2364                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2365                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2366         fi ; \
2367         if [ "$(findstring _33_,$@)" ] ; then \
2368                 $(XECHO) -n "...33M ..." ; \
2369                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2370                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2371         fi ; \
2372         if [ "$(findstring _66_,$@)" ] ; then \
2373                 $(XECHO) -n "...66M..." ; \
2374                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2375                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2376         fi ; \
2377         if [ "$(findstring _ATM_,$@)" ] ; then \
2378                 $(XECHO) -n "...ATM..." ; \
2379                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2380                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2381         fi ;
2382         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2383
2384 MPC8360ERDK_33_config \
2385 MPC8360ERDK_66_config \
2386 MPC8360ERDK_config:     unconfig
2387         @mkdir -p $(obj)include
2388         @if [ "$(findstring _33_,$@)" ] ; then \
2389                 $(XECHO) -n "... CLKIN 33MHz " ; \
2390                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2391         fi ;
2392         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2393
2394 MPC837XEMDS_config \
2395 MPC837XEMDS_HOST_config:        unconfig
2396         @mkdir -p $(obj)include
2397         @if [ "$(findstring _HOST_,$@)" ] ; then \
2398                 $(XECHO) -n "... PCI HOST " ; \
2399                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2400         fi ;
2401         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2402
2403 MPC837XERDB_config:     unconfig
2404         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2405
2406 MVBLM7_config: unconfig
2407         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2408
2409 sbc8349_config \
2410 sbc8349_PCI_33_config \
2411 sbc8349_PCI_66_config: unconfig
2412         @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
2413
2414 SIMPC8313_LP_config \
2415 SIMPC8313_SP_config: unconfig
2416         @mkdir -p $(obj)include
2417         @mkdir -p $(obj)board/sheldon/simpc8313
2418         @if [ "$(findstring _LP_,$@)" ] ; then \
2419                 $(XECHO) -n "...Large Page NAND..." ; \
2420                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2421         fi ; \
2422         if [ "$(findstring _SP_,$@)" ] ; then \
2423                 $(XECHO) -n "...Small Page NAND..." ; \
2424                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2425         fi ;
2426         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2427         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2428
2429 TQM834x_config: unconfig
2430         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2431
2432 vme8349_config:         unconfig
2433         @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
2434
2435 #########################################################################
2436 ## MPC85xx Systems
2437 #########################################################################
2438
2439 ATUM8548_config:        unconfig
2440         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2441
2442 MPC8536DS_NAND_config \
2443 MPC8536DS_SDCARD_config \
2444 MPC8536DS_SPIFLASH_config \
2445 MPC8536DS_36BIT_config \
2446 MPC8536DS_config:       unconfig
2447         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2448
2449 MPC8540ADS_config:      unconfig
2450         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2451
2452 MPC8540EVAL_config \
2453 MPC8540EVAL_33_config \
2454 MPC8540EVAL_66_config \
2455 MPC8540EVAL_33_slave_config \
2456 MPC8540EVAL_66_slave_config:      unconfig
2457         @mkdir -p $(obj)include
2458         @if [ "$(findstring _33_,$@)" ] ; then \
2459                 $(XECHO) "... 33 MHz PCI" ; \
2460         else \
2461                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2462                 $(XECHO) "... 66 MHz PCI" ; \
2463         fi ; \
2464         if [ "$(findstring _slave_,$@)" ] ; then \
2465                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2466                 $(XECHO) " slave" ; \
2467         else \
2468                 $(XECHO) " host" ; \
2469         fi
2470         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2471
2472 MPC8560ADS_config:      unconfig
2473         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2474
2475 MPC8541CDS_legacy_config \
2476 MPC8541CDS_config:      unconfig
2477         @mkdir -p $(obj)include
2478         @if [ "$(findstring _legacy_,$@)" ] ; then \
2479                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2480                 $(XECHO) "... legacy" ; \
2481         fi
2482         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2483
2484 MPC8544DS_config:       unconfig
2485         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2486
2487 MPC8548CDS_legacy_config \
2488 MPC8548CDS_config:      unconfig
2489         @mkdir -p $(obj)include
2490         @if [ "$(findstring _legacy_,$@)" ] ; then \
2491                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2492                 $(XECHO) "... legacy" ; \
2493         fi
2494         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2495
2496 MPC8555CDS_legacy_config \
2497 MPC8555CDS_config:      unconfig
2498         @mkdir -p $(obj)include
2499         @if [ "$(findstring _legacy_,$@)" ] ; then \
2500                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2501                 $(XECHO) "... legacy" ; \
2502         fi
2503         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2504
2505 MPC8568MDS_config:      unconfig
2506         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2507
2508 MPC8569MDS_config:      unconfig
2509         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2510
2511 MPC8572DS_36BIT_config \
2512 MPC8572DS_config:       unconfig
2513         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2514
2515 P2020DS_36BIT_config \
2516 P2020DS_config:         unconfig
2517         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2518
2519 P1011RDB_config \
2520 P1011RDB_NAND_config \
2521 P1011RDB_SDCARD_config \
2522 P1011RDB_SPIFLASH_config \
2523 P1020RDB_config \
2524 P1020RDB_NAND_config \
2525 P1020RDB_SDCARD_config \
2526 P1020RDB_SPIFLASH_config \
2527 P2010RDB_config \
2528 P2010RDB_NAND_config \
2529 P2010RDB_SDCARD_config \
2530 P2010RDB_SPIFLASH_config \
2531 P2020RDB_config \
2532 P2020RDB_NAND_config \
2533 P2020RDB_SDCARD_config \
2534 P2020RDB_SPIFLASH_config:       unconfig
2535         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2536
2537 PM854_config:   unconfig
2538         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2539
2540 PM856_config:   unconfig
2541         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2542
2543 sbc8540_config \
2544 sbc8540_33_config \
2545 sbc8540_66_config:      unconfig
2546         @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
2547
2548 sbc8548_config \
2549 sbc8548_PCI_33_config \
2550 sbc8548_PCI_66_config \
2551 sbc8548_PCI_33_PCIE_config \
2552 sbc8548_PCI_66_PCIE_config: unconfig
2553         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2554
2555 sbc8560_config \
2556 sbc8560_33_config \
2557 sbc8560_66_config:      unconfig
2558         @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
2559
2560 socrates_config:        unconfig
2561         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2562
2563 stxgp3_config:          unconfig
2564         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2565
2566 stxssa_config           \
2567 stxssa_4M_config:       unconfig
2568         @mkdir -p $(obj)include
2569         @if [ "$(findstring _4M_,$@)" ] ; then \
2570                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2571                 $(XECHO) "... with 4 MiB flash memory" ; \
2572         fi
2573         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2574
2575 TQM8540_config          \
2576 TQM8541_config          \
2577 TQM8548_config          \
2578 TQM8548_AG_config       \
2579 TQM8548_BE_config       \
2580 TQM8555_config          \
2581 TQM8560_config:         unconfig
2582         @mkdir -p $(obj)include
2583         @BTYPE=$(@:_config=); \
2584         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2585         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2586         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2587         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2588         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2589         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2590         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2591         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2592
2593 XPEDITE5200_config:     unconfig
2594         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2595
2596 XPEDITE5370_config:     unconfig
2597         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2598
2599 #########################################################################
2600 ## MPC86xx Systems
2601 #########################################################################
2602
2603 MPC8610HPCD_config:     unconfig
2604         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2605
2606 MPC8641HPCN_36BIT_config \
2607 MPC8641HPCN_config:    unconfig
2608         @mkdir -p $(obj)include
2609         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2610                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2611                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2612         fi
2613         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2614
2615 sbc8641d_config:        unconfig
2616         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2617
2618 XPEDITE5170_config:     unconfig
2619         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2620
2621 #########################################################################
2622 ## 74xx/7xx Systems
2623 #########################################################################
2624
2625 AmigaOneG3SE_config:    unconfig
2626         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2627
2628 BAB7xx_config: unconfig
2629         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2630
2631 CPCI750_config: unconfig
2632         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2633
2634 DB64360_config: unconfig
2635         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2636
2637 DB64460_config: unconfig
2638         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2639
2640 ELPPC_config: unconfig
2641         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2642
2643 EVB64260_config \
2644 EVB64260_750CX_config:  unconfig
2645         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2646
2647 mpc7448hpc2_config:  unconfig
2648         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2649
2650 P3G4_config: unconfig
2651         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2652
2653 p3m750_config   \
2654 p3m7448_config:         unconfig
2655         @mkdir -p $(obj)include
2656         @if [ "$(findstring 750_,$@)" ] ; then \
2657                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2658         else \
2659                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2660         fi
2661         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2662
2663 PCIPPC2_config \
2664 PCIPPC6_config: unconfig
2665         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2666
2667 ppmc7xx_config: unconfig
2668         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2669
2670 ZUMA_config:    unconfig
2671         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2672
2673 #========================================================================
2674 # ARM
2675 #========================================================================
2676 #########################################################################
2677 ## StrongARM Systems
2678 #########################################################################
2679
2680 assabet_config  :       unconfig
2681         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2682
2683 dnp1110_config  :       unconfig
2684         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2685
2686 gcplus_config   :       unconfig
2687         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2688
2689 lart_config     :       unconfig
2690         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2691
2692 shannon_config  :       unconfig
2693         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2694
2695 #########################################################################
2696 ## ARM92xT Systems
2697 #########################################################################
2698
2699 #########################################################################
2700 ## Atmel AT91RM9200 Systems
2701 #########################################################################
2702
2703 at91rm9200dk_config     :       unconfig
2704         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2705
2706 at91rm9200ek_config     :       unconfig
2707         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2708
2709 cmc_pu2_config  :       unconfig
2710         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2711
2712 CPUAT91_RAM_config \
2713 CPUAT91_config  :       unconfig
2714         @mkdir -p $(obj)include
2715         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2716         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2717
2718 csb637_config   :       unconfig
2719         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2720
2721 kb9202_config   :       unconfig
2722         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2723
2724 m501sk_config   :       unconfig
2725         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2726
2727 mp2usb_config   :       unconfig
2728         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2729
2730 #########################################################################
2731 ## Atmel ARM926EJ-S Systems
2732 #########################################################################
2733
2734 afeb9260_config:        unconfig
2735         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2736
2737 at91cap9adk_config      :       unconfig
2738         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2739
2740 at91sam9260ek_nandflash_config \
2741 at91sam9260ek_dataflash_cs0_config \
2742 at91sam9260ek_dataflash_cs1_config \
2743 at91sam9260ek_config \
2744 at91sam9g20ek_nandflash_config \
2745 at91sam9g20ek_dataflash_cs0_config \
2746 at91sam9g20ek_dataflash_cs1_config \
2747 at91sam9g20ek_config    :       unconfig
2748         @mkdir -p $(obj)include
2749         @if [ "$(findstring 9g20,$@)" ] ; then \
2750                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2751                 $(XECHO) "... 9G20 Variant" ; \
2752         else \
2753                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2754         fi;
2755         @if [ "$(findstring _nandflash,$@)" ] ; then \
2756                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2757                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2758         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2759                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2760                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2761         else \
2762                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2763                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2764         fi;
2765         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2766
2767 at91sam9xeek_nandflash_config \
2768 at91sam9xeek_dataflash_cs0_config \
2769 at91sam9xeek_dataflash_cs1_config \
2770 at91sam9xeek_config     :       unconfig
2771         @mkdir -p $(obj)include
2772         @if [ "$(findstring _nandflash,$@)" ] ; then \
2773                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2774                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2775         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2776                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2777                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2778         else \
2779                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2780                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2781         fi;
2782         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2783
2784 at91sam9261ek_nandflash_config \
2785 at91sam9261ek_dataflash_cs0_config \
2786 at91sam9261ek_dataflash_cs3_config \
2787 at91sam9261ek_config \
2788 at91sam9g10ek_nandflash_config \
2789 at91sam9g10ek_dataflash_cs0_config \
2790 at91sam9g10ek_dataflash_cs3_config \
2791 at91sam9g10ek_config    :       unconfig
2792         @mkdir -p $(obj)include
2793         @if [ "$(findstring 9g10,$@)" ] ; then \
2794                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2795                 $(XECHO) "... 9G10 Variant" ; \
2796         else \
2797                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2798         fi;
2799         @if [ "$(findstring _nandflash,$@)" ] ; then \
2800                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2801                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2802         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2803                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2804                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2805         else \
2806                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2807                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2808         fi;
2809         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2810
2811 at91sam9263ek_norflash_config \
2812 at91sam9263ek_norflash_boot_config \
2813 at91sam9263ek_nandflash_config \
2814 at91sam9263ek_dataflash_config \
2815 at91sam9263ek_dataflash_cs0_config \
2816 at91sam9263ek_config    :       unconfig
2817         @mkdir -p $(obj)include
2818         @if [ "$(findstring _nandflash,$@)" ] ; then \
2819                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2820                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2821         elif [ "$(findstring norflash,$@)" ] ; then \
2822                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2823                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2824         else \
2825                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2826                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2827         fi;
2828         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2829                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2830                 $(XECHO) "... and boot from NOR FLASH" ; \
2831         fi;
2832         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2833
2834 at91sam9rlek_nandflash_config \
2835 at91sam9rlek_dataflash_config \
2836 at91sam9rlek_dataflash_cs0_config \
2837 at91sam9rlek_config     :       unconfig
2838         @mkdir -p $(obj)include
2839         @if [ "$(findstring _nandflash,$@)" ] ; then \
2840                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2841                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2842         else \
2843                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2844                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2845         fi;
2846         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2847
2848 CPU9G20_128M_config \
2849 CPU9G20_config \
2850 CPU9260_128M_config \
2851 CPU9260_config  :       unconfig
2852         @mkdir -p $(obj)include
2853         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2854         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2855
2856 meesc_config    :       unconfig
2857         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2858
2859 pm9261_config   :       unconfig
2860         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2861
2862 at91sam9m10g45ek_nandflash_config \
2863 at91sam9m10g45ek_dataflash_config \
2864 at91sam9m10g45ek_dataflash_cs0_config \
2865 at91sam9m10g45ek_config \
2866 at91sam9g45ekes_nandflash_config \
2867 at91sam9g45ekes_dataflash_config \
2868 at91sam9g45ekes_dataflash_cs0_config \
2869 at91sam9g45ekes_config  :       unconfig
2870         @mkdir -p $(obj)include
2871                 @if [ "$(findstring 9m10,$@)" ] ; then \
2872                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2873                 $(XECHO) "... 9M10G45 Variant" ; \
2874         else \
2875                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2876         fi;
2877
2878         @if [ "$(findstring _nandflash,$@)" ] ; then \
2879                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2880                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2881         else \
2882                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2883                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2884         fi;
2885         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2886
2887 pm9263_config   :       unconfig
2888         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2889
2890 SBC35_A9G20_NANDFLASH_config \
2891 SBC35_A9G20_EEPROM_config \
2892 SBC35_A9G20_config      :       unconfig
2893         @mkdir -p $(obj)include
2894         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2895         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2896
2897 TNY_A9G20_NANDFLASH_config \
2898 TNY_A9G20_EEPROM_config \
2899 TNY_A9G20_config \
2900 TNY_A9260_NANDFLASH_config \
2901 TNY_A9260_EEPROM_config \
2902 TNY_A9260_config        :       unconfig
2903         @mkdir -p $(obj)include
2904         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2905         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2906
2907 ########################################################################
2908 ## ARM Integrator boards - see doc/README-integrator for more info.
2909 integratorap_config     \
2910 ap_config               \
2911 ap966_config            \
2912 ap922_config            \
2913 ap922_XA10_config       \
2914 ap7_config              \
2915 ap720t_config           \
2916 ap920t_config           \
2917 ap926ejs_config         \
2918 ap946es_config: unconfig
2919         @board/armltd/integrator/split_by_variant.sh ap $@
2920
2921 integratorcp_config     \
2922 cp_config               \
2923 cp920t_config           \
2924 cp926ejs_config         \
2925 cp946es_config          \
2926 cp1136_config           \
2927 cp966_config            \
2928 cp922_config            \
2929 cp922_XA10_config       \
2930 cp1026_config: unconfig
2931         @board/armltd/integrator/split_by_variant.sh cp $@
2932
2933 davinci_dvevm_config :  unconfig
2934         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2935
2936 davinci_schmoogie_config :      unconfig
2937         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2938
2939 davinci_sffsdr_config : unconfig
2940         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2941
2942 davinci_sonata_config : unconfig
2943         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2944
2945 davinci_dm355evm_config :       unconfig
2946         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2947
2948 davinci_dm355leopard_config :   unconfig
2949         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2950
2951 davinci_dm365evm_config :       unconfig
2952         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2953
2954 davinci_dm6467evm_config :      unconfig
2955         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2956
2957 imx27lite_config:       unconfig
2958         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2959
2960 lpd7a400_config \
2961 lpd7a404_config:        unconfig
2962         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2963
2964 mv88f6281gtw_ge_config: unconfig
2965         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2966
2967 mx1ads_config   :       unconfig
2968         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2969
2970 mx1fs2_config   :       unconfig
2971         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2972
2973 netstar_config:         unconfig
2974         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2975
2976 nhk8815_config \
2977 nhk8815_onenand_config: unconfig
2978         @mkdir -p $(obj)include
2979         @ > $(obj)include/config.h
2980         @if [ "$(findstring _onenand, $@)" ] ; then \
2981                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2982                 $(XECHO) "... configured to boot from OneNand Flash"; \
2983         else \
2984                 $(XECHO) "... configured to boot from Nand Flash"; \
2985         fi
2986         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2987
2988 omap1510inn_config :    unconfig
2989         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2990
2991 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2992
2993 omap1610inn_config \
2994 omap1610inn_cs0boot_config \
2995 omap1610inn_cs3boot_config \
2996 omap1610inn_cs_autoboot_config \
2997 omap1610h2_config \
2998 omap1610h2_cs0boot_config \
2999 omap1610h2_cs3boot_config \
3000 omap1610h2_cs_autoboot_config:  unconfig
3001         @mkdir -p $(obj)include
3002         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3003                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
3004                 $(XECHO) "... configured for CS0 boot"; \
3005         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
3006                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
3007                 $(XECHO) "... configured for CS_AUTO boot"; \
3008         else \
3009                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3010                 $(XECHO) "... configured for CS3 boot"; \
3011         fi;
3012         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
3013
3014 omap5912osk_config :    unconfig
3015         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
3016
3017 openrd_base_config: unconfig
3018         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3019
3020 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3021
3022 omap730p2_config \
3023 omap730p2_cs0boot_config \
3024 omap730p2_cs3boot_config :      unconfig
3025         @mkdir -p $(obj)include
3026         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3027                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3028                 $(XECHO) "... configured for CS0 boot"; \
3029         else \
3030                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3031                 $(XECHO) "... configured for CS3 boot"; \
3032         fi;
3033         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3034
3035 rd6281a_config: unconfig
3036         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3037
3038 sbc2410x_config: unconfig
3039         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3040
3041 scb9328_config  :       unconfig
3042         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3043
3044 sheevaplug_config: unconfig
3045         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3046
3047 smdk2400_config :       unconfig
3048         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3049
3050 smdk2410_config :       unconfig
3051         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3052
3053 SX1_stdout_serial_config \
3054 SX1_config:             unconfig
3055         @mkdir -p $(obj)include
3056         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3057                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3058                 $(XECHO) "... configured for stdout serial"; \
3059         else \
3060                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3061                 $(XECHO) "... configured for stdout usbtty"; \
3062         fi;
3063         @$(MKCONFIG) SX1 arm arm925t sx1
3064
3065 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3066 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3067
3068 trab_config \
3069 trab_bigram_config \
3070 trab_bigflash_config \
3071 trab_old_config:        unconfig
3072         @mkdir -p $(obj)include
3073         @mkdir -p $(obj)board/trab
3074         @[ -z "$(findstring _bigram,$@)" ] || \
3075                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3076                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3077                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3078                 }
3079         @[ -z "$(findstring _bigflash,$@)" ] || \
3080                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3081                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3082                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3083                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3084                 }
3085         @[ -z "$(findstring _old,$@)" ] || \
3086                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3087                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3088                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3089                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3090                 }
3091         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3092
3093 VCMA9_config    :       unconfig
3094         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3095
3096 #########################################################################
3097 # ARM supplied Versatile development boards
3098 #########################################################################
3099
3100 cm4008_config   :       unconfig
3101         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3102
3103 cm41xx_config   :       unconfig
3104         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3105
3106 versatile_config        \
3107 versatileab_config      \
3108 versatilepb_config :    unconfig
3109         @board/armltd/versatile/split_by_variant.sh $@
3110
3111 voiceblue_config:       unconfig
3112         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3113
3114 #########################################################################
3115 ## S3C44B0 Systems
3116 #########################################################################
3117
3118 B2_config       :       unconfig
3119         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3120
3121 #########################################################################
3122 ## ARM720T Systems
3123 #########################################################################
3124
3125 armadillo_config:       unconfig
3126         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3127
3128 ep7312_config   :       unconfig
3129         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3130
3131 impa7_config    :       unconfig
3132         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3133
3134 modnet50_config :       unconfig
3135         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3136
3137 evb4510_config :        unconfig
3138         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3139
3140 lpc2292sodimm_config:   unconfig
3141         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3142
3143 SMN42_config    :       unconfig
3144         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3145
3146 #########################################################################
3147 ## ARM CORTEX Systems
3148 #########################################################################
3149
3150 devkit8000_config :     unconfig
3151         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3152
3153 omap3_beagle_config :   unconfig
3154         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3155
3156 omap3_overo_config :    unconfig
3157         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3158
3159 omap3_evm_config :      unconfig
3160         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3161
3162 omap3_pandora_config :  unconfig
3163         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3164
3165 omap3_sdp3430_config :  unconfig
3166         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3167
3168 omap3_zoom1_config :    unconfig
3169         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3170
3171 omap3_zoom2_config :    unconfig
3172         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3173
3174 smdkc100_config:        unconfig
3175         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3176
3177 #########################################################################
3178 ## XScale Systems
3179 #########################################################################
3180
3181 actux1_config   :       unconfig
3182         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3183
3184 actux2_config   :       unconfig
3185         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3186
3187 actux3_config   :       unconfig
3188         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3189
3190 actux4_config   :       unconfig
3191         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3192
3193 cerf250_config :        unconfig
3194         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3195
3196 cradle_config   :       unconfig
3197         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3198
3199 csb226_config   :       unconfig
3200         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3201
3202 delta_config :  unconfig
3203         @$(MKCONFIG) $(@:_config=) arm pxa delta
3204
3205 innokom_config  :       unconfig
3206         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3207
3208 ixdp425_config  :       unconfig
3209         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3210
3211 ixdpg425_config :       unconfig
3212         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3213
3214 lubbock_config  :       unconfig
3215         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3216
3217 pleb2_config    :       unconfig
3218         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3219
3220 logodl_config   :       unconfig
3221         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3222
3223 pdnb3_config \
3224 scpu_config:    unconfig
3225         @mkdir -p $(obj)include
3226         @if [ "$(findstring scpu_,$@)" ] ; then \
3227                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3228                 $(XECHO) "... on SCPU board variant" ; \
3229         fi
3230         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3231
3232 pxa255_idp_config:      unconfig
3233         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3234
3235 polaris_config \
3236 trizepsiv_config        :       unconfig
3237         @mkdir -p $(obj)include
3238         @if [ "$(findstring polaris,$@)" ] ; then \
3239                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3240         fi;
3241         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3242
3243 wepep250_config :       unconfig
3244         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3245
3246 xaeniax_config  :       unconfig
3247         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3248
3249 xm250_config    :       unconfig
3250         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3251
3252 xsengine_config :       unconfig
3253         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3254
3255 zylonite_config :
3256         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3257
3258 #########################################################################
3259 ## ARM1136 Systems
3260 #########################################################################
3261
3262 apollon_config          : unconfig
3263         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3264         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3265         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3266
3267 imx31_litekit_config    : unconfig
3268         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3269
3270 imx31_phycore_eet_config \
3271 imx31_phycore_config    : unconfig
3272         @mkdir -p $(obj)include
3273         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3274                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3275         fi
3276         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3277
3278 mx31ads_config          : unconfig
3279         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3280
3281 mx31pdk_config \
3282 mx31pdk_nand_config     : unconfig
3283         @mkdir -p $(obj)include
3284         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3285                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3286         else                                                                            \
3287                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3288                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3289         fi
3290         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3291
3292 omap2420h4_config       : unconfig
3293         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3294
3295 qong_config             : unconfig
3296         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3297
3298 #########################################################################
3299 ## ARM1176 Systems
3300 #########################################################################
3301 smdk6400_noUSB_config   \
3302 smdk6400_config :       unconfig
3303         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3304         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3305         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3306         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3307                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3308                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3309         else                                                                            \
3310                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3311                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3312         fi
3313         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3314
3315 #========================================================================
3316 # i386
3317 #========================================================================
3318 #########################################################################
3319 ## AMD SC520 CDP
3320 #########################################################################
3321 eNET_config     :       unconfig
3322         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3323
3324 sc520_cdp_config        :       unconfig
3325         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3326
3327 sc520_spunk_config      :       unconfig
3328         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3329
3330 sc520_spunk_rel_config  :       unconfig
3331         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3332
3333 #========================================================================
3334 # MIPS
3335 #========================================================================
3336 #########################################################################
3337 ## MIPS32 4Kc
3338 #########################################################################
3339
3340 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3341
3342 incaip_100MHz_config    \
3343 incaip_133MHz_config    \
3344 incaip_150MHz_config    \
3345 incaip_config: unconfig
3346         @mkdir -p $(obj)include
3347         @[ -z "$(findstring _100MHz,$@)" ] || \
3348                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3349                   $(XECHO) "... with 100MHz system clock" ; \
3350                 }
3351         @[ -z "$(findstring _133MHz,$@)" ] || \
3352                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3353                   $(XECHO) "... with 133MHz system clock" ; \
3354                 }
3355         @[ -z "$(findstring _150MHz,$@)" ] || \
3356                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3357                   $(XECHO) "... with 150MHz system clock" ; \
3358                 }
3359         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3360
3361 tb0229_config: unconfig
3362         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3363
3364 vct_premium_config              \
3365 vct_premium_small_config        \
3366 vct_premium_onenand_config      \
3367 vct_premium_onenand_small_config \
3368 vct_platinum_config             \
3369 vct_platinum_small_config       \
3370 vct_platinum_onenand_config     \
3371 vct_platinum_onenand_small_config \
3372 vct_platinumavc_config          \
3373 vct_platinumavc_small_config    \
3374 vct_platinumavc_onenand_config  \
3375 vct_platinumavc_onenand_small_config: unconfig
3376         @mkdir -p $(obj)include
3377         @if [ "$(findstring _premium,$@)" ] ; then \
3378                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3379                 $(XECHO) "... on Premium board variant" ; \
3380         fi
3381         @if [ "$(findstring _platinum_,$@)" ] ; then \
3382                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3383                 $(XECHO) "... on Platinum board variant" ; \
3384         fi
3385         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3386                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3387                 $(XECHO) "... on PlatinumAVC board variant" ; \
3388         fi
3389         @if [ "$(findstring _onenand,$@)" ] ; then \
3390                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3391                 $(XECHO) "... on OneNAND board variant" ; \
3392         fi
3393         @if [ "$(findstring _small,$@)" ] ; then \
3394                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3395                 $(XECHO) "... stripped down image variant" ; \
3396         fi
3397         @$(MKCONFIG) -a vct mips mips vct micronas
3398
3399 #########################################################################
3400 ## MIPS32 AU1X00
3401 #########################################################################
3402
3403 dbau1000_config         :       unconfig
3404         @mkdir -p $(obj)include
3405         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3406         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3407
3408 dbau1100_config         :       unconfig
3409         @mkdir -p $(obj)include
3410         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3411         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3412
3413 dbau1500_config         :       unconfig
3414         @mkdir -p $(obj)include
3415         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3416         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3417
3418 dbau1550_config         :       unconfig
3419         @mkdir -p $(obj)include
3420         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3421         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3422
3423 dbau1550_el_config      :       unconfig
3424         @mkdir -p $(obj)include
3425         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3426         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3427
3428 gth2_config             :       unconfig
3429         @mkdir -p $(obj)include
3430         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3431         @$(MKCONFIG) -a gth2 mips mips gth2
3432
3433 pb1000_config           :       unconfig
3434         @mkdir -p $(obj)include
3435         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3436         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3437
3438 qemu_mips_config        : unconfig
3439         @mkdir -p $(obj)include
3440         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3441         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3442
3443 #########################################################################
3444 ## MIPS64 5Kc
3445 #########################################################################
3446
3447 purple_config :         unconfig
3448         @$(MKCONFIG) $(@:_config=) mips mips purple
3449
3450 #========================================================================
3451 # Nios
3452 #========================================================================
3453 #########################################################################
3454 ## Nios32
3455 #########################################################################
3456
3457 ADNPESC1_DNPEVA2_base_32_config \
3458 ADNPESC1_base_32_config         \
3459 ADNPESC1_config: unconfig
3460         @mkdir -p $(obj)include
3461         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3462                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3463                   $(XECHO) "... DNP/EVA2 configuration" ; \
3464                 }
3465         @[ -z "$(findstring _base_32,$@)" ] || \
3466                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3467                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3468                 }
3469         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3470                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3471                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3472                 }
3473         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3474
3475 DK1C20_safe_32_config           \
3476 DK1C20_standard_32_config       \
3477 DK1C20_config:  unconfig
3478         @mkdir -p $(obj)include
3479         @[ -z "$(findstring _safe_32,$@)" ] || \
3480                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3481                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3482                 }
3483         @[ -z "$(findstring _standard_32,$@)" ] || \
3484                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3485                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3486                 }
3487         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3488                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3489                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3490                 }
3491         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3492
3493 DK1S10_safe_32_config           \
3494 DK1S10_standard_32_config       \
3495 DK1S10_mtx_ldk_20_config        \
3496 DK1S10_config:  unconfig
3497         @mkdir -p $(obj)include
3498         @[ -z "$(findstring _safe_32,$@)" ] || \
3499                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3500                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3501                 }
3502         @[ -z "$(findstring _standard_32,$@)" ] || \
3503                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3504                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3505                 }
3506         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3507                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3508                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3509                 }
3510         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3511                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3512                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3513                 }
3514         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3515
3516 #########################################################################
3517 ## Nios-II
3518 #########################################################################
3519
3520 EP1C20_config : unconfig
3521         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3522
3523 EP1S10_config : unconfig
3524         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3525
3526 EP1S40_config : unconfig
3527         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3528
3529 PK1C20_config : unconfig
3530         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3531
3532 PCI5441_config : unconfig
3533         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3534
3535 #========================================================================
3536 ## Microblaze
3537 #========================================================================
3538
3539 microblaze-generic_config:      unconfig
3540         @mkdir -p $(obj)include
3541         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3542
3543 #========================================================================
3544 # Blackfin
3545 #========================================================================
3546
3547 # Analog Devices boards
3548 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3549         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3550
3551 # Bluetechnix tinyboards
3552 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 tcm-bf537
3553
3554 # Misc third party boards
3555 BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp
3556
3557 # I-SYST Micromodule
3558 BFIN_BOARDS += ibf-dsp561
3559
3560 $(BFIN_BOARDS:%=%_config)       : unconfig
3561         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3562
3563 #========================================================================
3564 # AVR32
3565 #========================================================================
3566
3567 atngw100_config :       unconfig
3568         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3569
3570 atstk1002_config        :       unconfig
3571         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3572
3573 atstk1003_config        :       unconfig
3574         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3575
3576 atstk1004_config        :       unconfig
3577         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3578
3579 atstk1006_config        :       unconfig
3580         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3581
3582 favr-32-ezkit_config    :       unconfig
3583         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3584
3585 hammerhead_config       :       unconfig
3586         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3587
3588 mimc200_config          :       unconfig
3589         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3590
3591 #========================================================================
3592 # SH3 (SuperH)
3593 #========================================================================
3594
3595 #########################################################################
3596 ## sh2 (Renesas SuperH)
3597 #########################################################################
3598 rsk7203_config: unconfig
3599         @mkdir -p $(obj)include
3600         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3601         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3602
3603 #########################################################################
3604 ## sh3 (Renesas SuperH)
3605 #########################################################################
3606
3607 mpr2_config: unconfig
3608         @mkdir -p $(obj)include
3609         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3610         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3611
3612 ms7720se_config: unconfig
3613         @mkdir -p $(obj)include
3614         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3615         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3616
3617 #########################################################################
3618 ## sh4 (Renesas SuperH)
3619 #########################################################################
3620
3621 MigoR_config :       unconfig
3622         @mkdir -p $(obj)include
3623         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3624         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3625
3626 ms7750se_config: unconfig
3627         @mkdir -p $(obj)include
3628         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3629         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3630
3631 ms7722se_config :       unconfig
3632         @mkdir -p $(obj)include
3633         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3634         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3635
3636 r2dplus_config  :   unconfig
3637         @mkdir -p $(obj)include
3638         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3639         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3640
3641 r7780mp_config: unconfig
3642         @mkdir -p $(obj)include
3643         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3644         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3645
3646 sh7763rdp_config  :   unconfig
3647         @mkdir -p $(obj)include
3648         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3649         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3650
3651 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3652 sh7785lcr_32bit_config \
3653 sh7785lcr_config  :   unconfig
3654         @mkdir -p $(obj)include
3655         @mkdir -p $(obj)board/renesas/sh7785lcr
3656         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3657         @if [ "$(findstring 32bit, $@)" ] ; then \
3658                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3659                 echo "TEXT_BASE = 0x8ff80000" > \
3660                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3661                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3662         fi
3663         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3664
3665 ap325rxa_config  :   unconfig
3666         @mkdir -p $(obj)include
3667         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3668         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3669
3670 espt_config  :   unconfig
3671         @mkdir -p $(obj)include
3672         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3673         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3674
3675 #========================================================================
3676 # SPARC
3677 #========================================================================
3678
3679 #########################################################################
3680 ## LEON3
3681 #########################################################################
3682
3683 # Gaisler GR-XC3S-1500 board
3684 gr_xc3s_1500_config : unconfig
3685         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3686
3687 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3688 gr_cpci_ax2000_config : unconfig
3689         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3690
3691 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3692 # Development board Stratix II edition, FPGA Device EP2S60.
3693 gr_ep2s60_config: unconfig
3694         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3695
3696 # Gaisler LEON3 GRSIM simulator
3697 grsim_config : unconfig
3698         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3699
3700 #########################################################################
3701 ## LEON2
3702 #########################################################################
3703
3704 # Gaisler LEON2 GRSIM simulator
3705 grsim_leon2_config : unconfig
3706         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3707
3708 #########################################################################
3709 #########################################################################
3710 #########################################################################
3711
3712 clean:
3713         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3714                $(obj)examples/standalone/atmel_df_pow2                    \
3715                $(obj)examples/standalone/eepro100_eeprom                  \
3716                $(obj)examples/standalone/hello_world                      \
3717                $(obj)examples/standalone/interrupt                        \
3718                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3719                $(obj)examples/standalone/sched                            \
3720                $(obj)examples/standalone/smc91111_eeprom                  \
3721                $(obj)examples/standalone/test_burst                       \
3722                $(obj)examples/standalone/timer
3723         @rm -f $(obj)examples/api/demo{,.bin}
3724         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3725                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3726                $(obj)tools/envcrc                                         \
3727                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3728                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3729                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3730                $(obj)tools/ncb             $(obj)tools/ubsha1
3731         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3732                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3733                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3734                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3735                $(obj)lib_blackfin/u-boot.lds                              \
3736                $(obj)u-boot.lds                                           \
3737                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3738         @rm -f $(obj)include/bmp_logo.h
3739         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3740         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3741         @rm -f $(ONENAND_BIN)
3742         @rm -f $(obj)onenand_ipl/u-boot.lds
3743         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3744         @find $(OBJTREE) -type f \
3745                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3746                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3747                 | xargs rm -f
3748
3749 clobber:        clean
3750         @find $(OBJTREE) -type f \( -name .depend \
3751                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3752                 -print0 \
3753                 | xargs -0 rm -f
3754         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3755                 $(obj)cscope.* $(obj)*.*~
3756         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3757         @rm -f $(obj)u-boot.kwb
3758         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3759         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3760         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3761         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3762         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3763
3764 ifeq ($(OBJTREE),$(SRCTREE))
3765 mrproper \
3766 distclean:      clobber unconfig
3767 else
3768 mrproper \
3769 distclean:      clobber unconfig
3770         rm -rf $(obj)*
3771 endif
3772
3773 backup:
3774         F=`basename $(TOPDIR)` ; cd .. ; \
3775         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3776
3777 #########################################################################