Makefile

   1 #
   2 # SPDX-License-Identifier:      GPL-2.0+
   3 #
   4
   5 VERSION = 2017
   6 PATCHLEVEL = 01
   7 SUBLEVEL =
   8 EXTRAVERSION = -rc1
   9 NAME =
  10
  11 # *DOCUMENTATION*
  12 # To see a list of typical targets execute "make help"
  13 # More info can be located in ./README
  14 # Comments in this file are targeted only to the developer, do not
  15 # expect to learn how to build the kernel reading this file.
  16
  17 # o Do not use make's built-in rules and variables
  18 #   (this increases performance and avoids hard-to-debug behaviour);
  19 # o Look for make include files relative to root of kernel src
  20 MAKEFLAGS += -rR --include-dir=$(CURDIR)
  21
  22 # Avoid funny character set dependencies
  23 unexport LC_ALL
  24 LC_COLLATE=C
  25 LC_NUMERIC=C
  26 export LC_COLLATE LC_NUMERIC
  27
  28 # Avoid interference with shell env settings
  29 unexport GREP_OPTIONS
  30
  31 # We are using a recursive build, so we need to do a little thinking
  32 # to get the ordering right.
  33 #
  34 # Most importantly: sub-Makefiles should only ever modify files in
  35 # their own directory. If in some directory we have a dependency on
  36 # a file in another dir (which doesn't happen often, but it's often
  37 # unavoidable when linking the built-in.o targets which finally
  38 # turn into vmlinux), we will call a sub make in that other dir, and
  39 # after that we are sure that everything which is in that other dir
  40 # is now up to date.
  41 #
  42 # The only cases where we need to modify files which have global
  43 # effects are thus separated out and done before the recursive
  44 # descending is started. They are now explicitly listed as the
  45 # prepare rule.
  46
  47 # Beautify output
  48 # ---------------------------------------------------------------------------
  49 #
  50 # Normally, we echo the whole command before executing it. By making
  51 # that echo $($(quiet)$(cmd)), we now have the possibility to set
  52 # $(quiet) to choose other forms of output instead, e.g.
  53 #
  54 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  55 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
  56 #
  57 # If $(quiet) is empty, the whole command will be printed.
  58 # If it is set to "quiet_", only the short version will be printed.
  59 # If it is set to "silent_", nothing will be printed at all, since
  60 # the variable $(silent_cmd_cc_o_c) doesn't exist.
  61 #
  62 # A simple variant is to prefix commands with $(Q) - that's useful
  63 # for commands that shall be hidden in non-verbose mode.
  64 #
  65 #       $(Q)ln $@ :<
  66 #
  67 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  68 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  69 #
  70 # To put more focus on warnings, be less verbose as default
  71 # Use 'make V=1' to see the full commands
  72
  73 ifeq ("$(origin V)", "command line")
  74   KBUILD_VERBOSE = $(V)
  75 endif
  76 ifndef KBUILD_VERBOSE
  77   KBUILD_VERBOSE = 0
  78 endif
  79
  80 ifeq ($(KBUILD_VERBOSE),1)
  81   quiet =
  82   Q =
  83 else
  84   quiet=quiet_
  85   Q = @
  86 endif
  87
  88 # If the user is running make -s (silent mode), suppress echoing of
  89 # commands
  90
  91 ifneq ($(filter 4.%,$(MAKE_VERSION)),)  # make-4
  92 ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  93   quiet=silent_
  94 endif
  95 else                                    # make-3.8x
  96 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  97   quiet=silent_
  98 endif
  99 endif
 100
 101 export quiet Q KBUILD_VERBOSE
 102
 103 # kbuild supports saving output files in a separate directory.
 104 # To locate output files in a separate directory two syntaxes are supported.
 105 # In both cases the working directory must be the root of the kernel src.
 106 # 1) O=
 107 # Use "make O=dir/to/store/output/files/"
 108 #
 109 # 2) Set KBUILD_OUTPUT
 110 # Set the environment variable KBUILD_OUTPUT to point to the directory
 111 # where the output files shall be placed.
 112 # export KBUILD_OUTPUT=dir/to/store/output/files/
 113 # make
 114 #
 115 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
 116 # variable.
 117
 118 # KBUILD_SRC is set on invocation of make in OBJ directory
 119 # KBUILD_SRC is not intended to be used by the regular user (for now)
 120 ifeq ($(KBUILD_SRC),)
 121
 122 # OK, Make called in directory where kernel src resides
 123 # Do we want to locate output files in a separate directory?
 124 ifeq ("$(origin O)", "command line")
 125   KBUILD_OUTPUT := $(O)
 126 endif
 127
 128 # That's our default target when none is given on the command line
 129 PHONY := _all
 130 _all:
 131
 132 # Cancel implicit rules on top Makefile
 133 $(CURDIR)/Makefile Makefile: ;
 134
 135 ifneq ($(KBUILD_OUTPUT),)
 136 # Invoke a second make in the output directory, passing relevant variables
 137 # check that the output directory actually exists
 138 saved-output := $(KBUILD_OUTPUT)
 139 KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
 140                                                                 && /bin/pwd)
 141 $(if $(KBUILD_OUTPUT),, \
 142      $(error failed to create output directory "$(saved-output)"))
 143
 144 PHONY += $(MAKECMDGOALS) sub-make
 145
 146 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 147         @:
 148
 149 sub-make: FORCE
 150         $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
 151         -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
 152
 153 # Leave processing to above invocation of make
 154 skip-makefile := 1
 155 endif # ifneq ($(KBUILD_OUTPUT),)
 156 endif # ifeq ($(KBUILD_SRC),)
 157
 158 # We process the rest of the Makefile if this is the final invocation of make
 159 ifeq ($(skip-makefile),)
 160
 161 # Do not print "Entering directory ...",
 162 # but we want to display it when entering to the output directory
 163 # so that IDEs/editors are able to understand relative filenames.
 164 MAKEFLAGS += --no-print-directory
 165
 166 # Call a source code checker (by default, "sparse") as part of the
 167 # C compilation.
 168 #
 169 # Use 'make C=1' to enable checking of only re-compiled files.
 170 # Use 'make C=2' to enable checking of *all* source files, regardless
 171 # of whether they are re-compiled or not.
 172 #
 173 # See the file "Documentation/sparse.txt" for more details, including
 174 # where to get the "sparse" utility.
 175
 176 ifeq ("$(origin C)", "command line")
 177   KBUILD_CHECKSRC = $(C)
 178 endif
 179 ifndef KBUILD_CHECKSRC
 180   KBUILD_CHECKSRC = 0
 181 endif
 182
 183 # Use make M=dir to specify directory of external module to build
 184 # Old syntax make ... SUBDIRS=$PWD is still supported
 185 # Setting the environment variable KBUILD_EXTMOD take precedence
 186 ifdef SUBDIRS
 187   KBUILD_EXTMOD ?= $(SUBDIRS)
 188 endif
 189
 190 ifeq ("$(origin M)", "command line")
 191   KBUILD_EXTMOD := $(M)
 192 endif
 193
 194 # If building an external module we do not care about the all: rule
 195 # but instead _all depend on modules
 196 PHONY += all
 197 ifeq ($(KBUILD_EXTMOD),)
 198 _all: all
 199 else
 200 _all: modules
 201 endif
 202
 203 ifeq ($(KBUILD_SRC),)
 204         # building in the source tree
 205         srctree := .
 206 else
 207         ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
 208                 # building in a subdirectory of the source tree
 209                 srctree := ..
 210         else
 211                 srctree := $(KBUILD_SRC)
 212         endif
 213 endif
 214 objtree         := .
 215 src             := $(srctree)
 216 obj             := $(objtree)
 217
 218 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 219
 220 export srctree objtree VPATH
 221
 222 # Make sure CDPATH settings don't interfere
 223 unexport CDPATH
 224
 225 #########################################################################
 226
 227 HOSTARCH := $(shell uname -m | \
 228         sed -e s/i.86/x86/ \
 229             -e s/sun4u/sparc64/ \
 230             -e s/arm.*/arm/ \
 231             -e s/sa110/arm/ \
 232             -e s/ppc64/powerpc/ \
 233             -e s/ppc/powerpc/ \
 234             -e s/macppc/powerpc/\
 235             -e s/sh.*/sh/)
 236
 237 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 238             sed -e 's/\(cygwin\).*/cygwin/')
 239
 240 export  HOSTARCH HOSTOS
 241
 242 #########################################################################
 243
 244 # set default to nothing for native builds
 245 ifeq ($(HOSTARCH),$(ARCH))
 246 CROSS_COMPILE ?=
 247 endif
 248
 249 KCONFIG_CONFIG  ?= .config
 250 export KCONFIG_CONFIG
 251
 252 # SHELL used by kbuild
 253 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 254           else if [ -x /bin/bash ]; then echo /bin/bash; \
 255           else echo sh; fi ; fi)
 256
 257 HOSTCC       = cc
 258 HOSTCXX      = c++
 259 HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
 260                 $(if $(CONFIG_TOOLS_DEBUG),-g)
 261 HOSTCXXFLAGS = -O2
 262
 263 ifeq ($(HOSTOS),cygwin)
 264 HOSTCFLAGS      += -ansi
 265 endif
 266
 267 # Mac OS X / Darwin's C preprocessor is Apple specific.  It
 268 # generates numerous errors and warnings.  We want to bypass it
 269 # and use GNU C's cpp.  To do this we pass the -traditional-cpp
 270 # option to the compiler.  Note that the -traditional-cpp flag
 271 # DOES NOT have the same semantics as GNU C's flag, all it does
 272 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
 273 #
 274 # Apple's linker is similar, thanks to the new 2 stage linking
 275 # multiple symbol definitions are treated as errors, hence the
 276 # -multiply_defined suppress option to turn off this error.
 277 #
 278 ifeq ($(HOSTOS),darwin)
 279 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
 280 DARWIN_MAJOR_VERSION    = $(shell sw_vers -productVersion | cut -f 1 -d '.')
 281 DARWIN_MINOR_VERSION    = $(shell sw_vers -productVersion | cut -f 2 -d '.')
 282
 283 os_x_before     = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
 284         $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
 285
 286 # Snow Leopards build environment has no longer restrictions as described above
 287 HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
 288 HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
 289 HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
 290
 291 # since Lion (10.7) ASLR is on by default, but we use linker generated lists
 292 # in some host tools which is a problem then ... so disable ASLR for these
 293 # tools
 294 HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
 295 endif
 296
 297 # Decide whether to build built-in, modular, or both.
 298 # Normally, just do built-in.
 299
 300 KBUILD_MODULES :=
 301 KBUILD_BUILTIN := 1
 302
 303 # If we have only "make modules", don't compile built-in objects.
 304 # When we're building modules with modversions, we need to consider
 305 # the built-in objects during the descend as well, in order to
 306 # make sure the checksums are up to date before we record them.
 307
 308 ifeq ($(MAKECMDGOALS),modules)
 309   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 310 endif
 311
 312 # If we have "make <whatever> modules", compile modules
 313 # in addition to whatever we do anyway.
 314 # Just "make" or "make all" shall build modules as well
 315
 316 # U-Boot does not need modules
 317 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 318 #  KBUILD_MODULES := 1
 319 #endif
 320
 321 #ifeq ($(MAKECMDGOALS),)
 322 #  KBUILD_MODULES := 1
 323 #endif
 324
 325 export KBUILD_MODULES KBUILD_BUILTIN
 326 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 327
 328 # We need some generic definitions (do not try to remake the file).
 329 scripts/Kbuild.include: ;
 330 include scripts/Kbuild.include
 331
 332 # Make variables (CC, etc...)
 333
 334 AS              = $(CROSS_COMPILE)as
 335 # Always use GNU ld
 336 ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
 337 LD              = $(CROSS_COMPILE)ld.bfd
 338 else
 339 LD              = $(CROSS_COMPILE)ld
 340 endif
 341 CC              = $(CROSS_COMPILE)gcc
 342 CPP             = $(CC) -E
 343 AR              = $(CROSS_COMPILE)ar
 344 NM              = $(CROSS_COMPILE)nm
 345 LDR             = $(CROSS_COMPILE)ldr
 346 STRIP           = $(CROSS_COMPILE)strip
 347 OBJCOPY         = $(CROSS_COMPILE)objcopy
 348 OBJDUMP         = $(CROSS_COMPILE)objdump
 349 AWK             = awk
 350 PERL            = perl
 351 PYTHON          = python
 352 DTC             = dtc
 353 CHECK           = sparse
 354
 355 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 356                   -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
 357
 358 KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
 359
 360 KBUILD_CFLAGS   := -Wall -Wstrict-prototypes \
 361                    -Wno-format-security \
 362                    -fno-builtin -ffreestanding
 363 KBUILD_AFLAGS   := -D__ASSEMBLY__
 364
 365 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
 366 UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
 367 UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 368
 369 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
 370 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
 371 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
 372 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
 373 export MAKE AWK PERL PYTHON
 374 export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
 375
 376 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
 377 export KBUILD_CFLAGS KBUILD_AFLAGS
 378
 379 # When compiling out-of-tree modules, put MODVERDIR in the module
 380 # tree rather than in the kernel tree. The kernel tree might
 381 # even be read-only.
 382 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 383
 384 # Files to ignore in find ... statements
 385
 386 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 387                           -name CVS -o -name .pc -o -name .hg -o -name .git \) \
 388                           -prune -o
 389 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 390                          --exclude CVS --exclude .pc --exclude .hg --exclude .git
 391
 392 # ===========================================================================
 393 # Rules shared between *config targets and build targets
 394
 395 # Basic helpers built in scripts/
 396 PHONY += scripts_basic
 397 scripts_basic:
 398         $(Q)$(MAKE) $(build)=scripts/basic
 399         $(Q)rm -f .tmp_quiet_recordmcount
 400
 401 # To avoid any implicit rule to kick in, define an empty command.
 402 scripts/basic/%: scripts_basic ;
 403
 404 PHONY += outputmakefile
 405 # outputmakefile generates a Makefile in the output directory, if using a
 406 # separate output directory. This allows convenient use of make in the
 407 # output directory.
 408 outputmakefile:
 409 ifneq ($(KBUILD_SRC),)
 410         $(Q)ln -fsn $(srctree) source
 411         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 412             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 413 endif
 414
 415 # To make sure we do not include .config for any of the *config targets
 416 # catch them early, and hand them over to scripts/kconfig/Makefile
 417 # It is allowed to specify more targets when calling make, including
 418 # mixing *config targets and build targets.
 419 # For example 'make oldconfig all'.
 420 # Detect when mixed targets is specified, and make a second invocation
 421 # of make so .config is not included in this case either (for *config).
 422
 423 version_h := include/generated/version_autogenerated.h
 424 timestamp_h := include/generated/timestamp_autogenerated.h
 425
 426 no-dot-config-targets := clean clobber mrproper distclean \
 427                          help %docs check% coccicheck \
 428                          ubootversion backup tests
 429
 430 config-targets := 0
 431 mixed-targets  := 0
 432 dot-config     := 1
 433
 434 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 435         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 436                 dot-config := 0
 437         endif
 438 endif
 439
 440 ifeq ($(KBUILD_EXTMOD),)
 441         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 442                 config-targets := 1
 443                 ifneq ($(words $(MAKECMDGOALS)),1)
 444                         mixed-targets := 1
 445                 endif
 446         endif
 447 endif
 448
 449 ifeq ($(mixed-targets),1)
 450 # ===========================================================================
 451 # We're called with mixed targets (*config and build targets).
 452 # Handle them one by one.
 453
 454 PHONY += $(MAKECMDGOALS) __build_one_by_one
 455
 456 $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
 457         @:
 458
 459 __build_one_by_one:
 460         $(Q)set -e; \
 461         for i in $(MAKECMDGOALS); do \
 462                 $(MAKE) -f $(srctree)/Makefile $$i; \
 463         done
 464
 465 else
 466 ifeq ($(config-targets),1)
 467 # ===========================================================================
 468 # *config targets only - make sure prerequisites are updated, and descend
 469 # in scripts/kconfig to make the *config target
 470
 471 KBUILD_DEFCONFIG := sandbox_defconfig
 472 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 473
 474 config: scripts_basic outputmakefile FORCE
 475         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 476
 477 %config: scripts_basic outputmakefile FORCE
 478         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 479
 480 else
 481 # ===========================================================================
 482 # Build targets only - this includes vmlinux, arch specific targets, clean
 483 # targets and others. In general all targets except *config targets.
 484
 485 ifeq ($(dot-config),1)
 486 # Read in config
 487 -include include/config/auto.conf
 488
 489 # Read in dependencies to all Kconfig* files, make sure to run
 490 # oldconfig if changes are detected.
 491 -include include/config/auto.conf.cmd
 492
 493 # To avoid any implicit rule to kick in, define an empty command
 494 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 495
 496 # If .config is newer than include/config/auto.conf, someone tinkered
 497 # with it and forgot to run make oldconfig.
 498 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 499 # we execute the config step to be sure to catch updated Kconfig files
 500 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 501         $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 502         @# If the following part fails, include/config/auto.conf should be
 503         @# deleted so "make silentoldconfig" will be re-run on the next build.
 504         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
 505                 { rm -f include/config/auto.conf; false; }
 506         @# include/config.h has been updated after "make silentoldconfig".
 507         @# We need to touch include/config/auto.conf so it gets newer
 508         @# than include/config.h.
 509         @# Otherwise, 'make silentoldconfig' would be invoked twice.
 510         $(Q)touch include/config/auto.conf
 511
 512 -include include/autoconf.mk
 513 -include include/autoconf.mk.dep
 514
 515 # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
 516 # is up-to-date. When we switch to a different board configuration, old CONFIG
 517 # macros are still remaining in include/config/auto.conf. Without the following
 518 # gimmick, wrong config.mk would be included leading nasty warnings/errors.
 519 ifneq ($(wildcard $(KCONFIG_CONFIG)),)
 520 ifneq ($(wildcard include/config/auto.conf),)
 521 autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
 522                                                 include/config/auto.conf)
 523 ifeq ($(autoconf_is_old),)
 524 include config.mk
 525 include arch/$(ARCH)/Makefile
 526 endif
 527 endif
 528 endif
 529
 530 # These are set by the arch-specific config.mk. Make sure they are exported
 531 # so they can be used when building an EFI application.
 532 export EFI_LDS          # Filename of EFI link script in arch/$(ARCH)/lib
 533 export EFI_CRT0         # Filename of EFI CRT0 in arch/$(ARCH)/lib
 534 export EFI_RELOC        # Filename of EFU relocation code in arch/$(ARCH)/lib
 535 export CFLAGS_EFI       # Compiler flags to add when building EFI app
 536 export CFLAGS_NON_EFI   # Compiler flags to remove when building EFI app
 537 export EFI_TARGET       # binutils target if EFI is natively supported
 538
 539 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
 540 # that (or fail if absent).  Otherwise, search for a linker script in a
 541 # standard location.
 542
 543 ifndef LDSCRIPT
 544         #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
 545         ifdef CONFIG_SYS_LDSCRIPT
 546                 # need to strip off double quotes
 547                 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
 548         endif
 549 endif
 550
 551 # If there is no specified link script, we look in a number of places for it
 552 ifndef LDSCRIPT
 553         ifeq ($(wildcard $(LDSCRIPT)),)
 554                 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
 555         endif
 556         ifeq ($(wildcard $(LDSCRIPT)),)
 557                 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
 558         endif
 559         ifeq ($(wildcard $(LDSCRIPT)),)
 560                 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
 561         endif
 562 endif
 563
 564 else
 565 # Dummy target needed, because used as prerequisite
 566 include/config/auto.conf: ;
 567 endif # $(dot-config)
 568
 569 #
 570 # Xtensa linker script cannot be preprocessed with -ansi because of
 571 # preprocessor operations on strings that don't make C identifiers.
 572 #
 573 ifeq ($(CONFIG_XTENSA),)
 574 LDPPFLAGS       += -ansi
 575 endif
 576
 577 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 578 KBUILD_CFLAGS   += -Os
 579 else
 580 KBUILD_CFLAGS   += -O2
 581 endif
 582
 583 KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
 584 KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
 585
 586 KBUILD_CFLAGS   += -g
 587 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
 588 # option to the assembler.
 589 KBUILD_AFLAGS   += -g
 590
 591 # Report stack usage if supported
 592 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
 593         KBUILD_CFLAGS += -fstack-usage
 594 endif
 595
 596 KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
 597
 598 # turn jbsr into jsr for m68k
 599 ifeq ($(ARCH),m68k)
 600 ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
 601 KBUILD_AFLAGS += -Wa,-gstabs,-S
 602 endif
 603 endif
 604
 605 # Prohibit date/time macros, which would make the build non-deterministic
 606 KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
 607
 608 include scripts/Makefile.extrawarn
 609
 610 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 611 KBUILD_CPPFLAGS += $(KCPPFLAGS)
 612 KBUILD_AFLAGS += $(KAFLAGS)
 613 KBUILD_CFLAGS += $(KCFLAGS)
 614
 615 # Use UBOOTINCLUDE when you must reference the include/ directory.
 616 # Needed to be compatible with the O= option
 617 UBOOTINCLUDE    := \
 618                 -Iinclude \
 619                 $(if $(KBUILD_SRC), -I$(srctree)/include) \
 620                 $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \
 621                         -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
 622                 -I$(srctree)/arch/$(ARCH)/include \
 623                 -include $(srctree)/include/linux/kconfig.h
 624
 625 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 626 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 627
 628 # FIX ME
 629 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
 630                                                         $(NOSTDINC_FLAGS)
 631 c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
 632
 633 #########################################################################
 634 # U-Boot objects....order is important (i.e. start must be first)
 635
 636 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
 637
 638 libs-y += lib/
 639 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 640 libs-$(CONFIG_OF_EMBED) += dts/
 641 libs-y += fs/
 642 libs-y += net/
 643 libs-y += disk/
 644 libs-y += drivers/
 645 libs-y += drivers/dma/
 646 libs-y += drivers/gpio/
 647 libs-y += drivers/i2c/
 648 libs-y += drivers/mmc/
 649 libs-y += drivers/mtd/
 650 libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
 651 libs-y += drivers/mtd/onenand/
 652 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 653 libs-y += drivers/mtd/spi/
 654 libs-y += drivers/net/
 655 libs-y += drivers/net/phy/
 656 libs-y += drivers/pci/
 657 libs-y += drivers/power/ \
 658         drivers/power/domain/ \
 659         drivers/power/fuel_gauge/ \
 660         drivers/power/mfd/ \
 661         drivers/power/pmic/ \
 662         drivers/power/battery/ \
 663         drivers/power/regulator/
 664 libs-y += drivers/spi/
 665 libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
 666 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 667 libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
 668 libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
 669 libs-y += drivers/serial/
 670 libs-y += drivers/usb/dwc3/
 671 libs-y += drivers/usb/common/
 672 libs-y += drivers/usb/emul/
 673 libs-y += drivers/usb/eth/
 674 libs-y += drivers/usb/gadget/
 675 libs-y += drivers/usb/gadget/udc/
 676 libs-y += drivers/usb/host/
 677 libs-y += drivers/usb/musb/
 678 libs-y += drivers/usb/musb-new/
 679 libs-y += drivers/usb/phy/
 680 libs-y += drivers/usb/ulpi/
 681 libs-y += cmd/
 682 libs-y += common/
 683 libs-$(CONFIG_API) += api/
 684 libs-$(CONFIG_HAS_POST) += post/
 685 libs-y += test/
 686 libs-y += test/dm/
 687 libs-$(CONFIG_UT_ENV) += test/env/
 688 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
 689
 690 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
 691
 692 libs-y := $(sort $(libs-y))
 693
 694 u-boot-dirs     := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
 695
 696 u-boot-alldirs  := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
 697
 698 libs-y          := $(patsubst %/, %/built-in.o, $(libs-y))
 699
 700 u-boot-init := $(head-y)
 701 u-boot-main := $(libs-y)
 702
 703
 704 # Add GCC lib
 705 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
 706 PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
 707 else
 708 PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
 709 endif
 710 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 711 export PLATFORM_LIBS
 712 export PLATFORM_LIBGCC
 713
 714 # Special flags for CPP when processing the linker script.
 715 # Pass the version down so we can handle backwards compatibility
 716 # on the fly.
 717 LDPPFLAGS += \
 718         -include $(srctree)/include/u-boot/u-boot.lds.h \
 719         -DCPUDIR=$(CPUDIR) \
 720         $(shell $(LD) --version | \
 721           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 722
 723 #########################################################################
 724 #########################################################################
 725
 726 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 727 BOARD_SIZE_CHECK = \
 728         @actual=`wc -c $@ | awk '{print $$1}'`; \
 729         limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 730         if test $$actual -gt $$limit; then \
 731                 echo "$@ exceeds file size limit:" >&2 ; \
 732                 echo "  limit:  $$limit bytes" >&2 ; \
 733                 echo "  actual: $$actual bytes" >&2 ; \
 734                 echo "  excess: $$((actual - limit)) bytes" >&2; \
 735                 exit 1; \
 736         fi
 737 else
 738 BOARD_SIZE_CHECK =
 739 endif
 740
 741 # Statically apply RELA-style relocations (currently arm64 only)
 742 ifneq ($(CONFIG_STATIC_RELA),)
 743 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
 744 DO_STATIC_RELA = \
 745         start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
 746         end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
 747         tools/relocate-rela $(2) $(3) $$start $$end
 748 else
 749 DO_STATIC_RELA =
 750 endif
 751
 752 # Always append ALL so that arch config.mk's can add custom ones
 753 ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
 754
 755 ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
 756 ifeq ($(CONFIG_SPL_FSL_PBL),y)
 757 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
 758 else
 759 ifneq ($(CONFIG_SECURE_BOOT), y)
 760 # For Secure Boot The Image needs to be signed and Header must also
 761 # be included. So The image has to be built explicitly
 762 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
 763 endif
 764 endif
 765 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
 766 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
 767 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
 768 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
 769 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
 770 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
 771 endif
 772 ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
 773 ifneq ($(CONFIG_SPL_TARGET),)
 774 ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 775 endif
 776 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
 777 ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
 778 ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
 779
 780 ifneq ($(BUILD_ROM),)
 781 ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
 782 endif
 783
 784 # enable combined SPL/u-boot/dtb rules for tegra
 785 ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
 786 ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
 787 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
 788 endif
 789
 790 # Add optional build target if defined in board/cpu/soc headers
 791 ifneq ($(CONFIG_BUILD_TARGET),)
 792 ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
 793 endif
 794
 795 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
 796 ifneq ($(CONFIG_SYS_TEXT_BASE),)
 797 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
 798 endif
 799
 800 # Normally we fill empty space with 0xff
 801 quiet_cmd_objcopy = OBJCOPY $@
 802 cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
 803         $(OBJCOPYFLAGS_$(@F)) $< $@
 804
 805 # Provide a version which does not do this, for use by EFI
 806 quiet_cmd_zobjcopy = OBJCOPY $@
 807 cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 808
 809 quiet_cmd_efipayload = OBJCOPY $@
 810 cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
 811
 812 quiet_cmd_mkimage = MKIMAGE $@
 813 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 814         $(if $(KBUILD_VERBOSE:1=), >/dev/null)
 815
 816 quiet_cmd_cat = CAT     $@
 817 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 818
 819 append = cat $(filter-out $< $(PHONY), $^) >> $@
 820
 821 quiet_cmd_pad_cat = CAT     $@
 822 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 823
 824 cfg: u-boot.cfg
 825
 826 all:            $(ALL-y)
 827 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
 828         @echo "===================== WARNING ======================"
 829         @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
 830         @echo "(possibly in a subsequent patch in your series)"
 831         @echo "before sending patches to the mailing list."
 832         @echo "===================================================="
 833 endif
 834         @# Check that this build does not use CONFIG options that we do not
 835         @# know about unless they are in Kconfig. All the existing CONFIG
 836         @# options are whitelisted, so new ones should not be added.
 837         $(srctree)/scripts/check-config.sh u-boot.cfg \
 838                 $(srctree)/scripts/config_whitelist.txt ${srctree} 1>&2
 839
 840 PHONY += dtbs
 841 dtbs: dts/dt.dtb
 842         @:
 843 dts/dt.dtb: checkdtc u-boot
 844         $(Q)$(MAKE) $(build)=dts dtbs
 845
 846 quiet_cmd_copy = COPY    $@
 847       cmd_copy = cp $< $@
 848
 849 ifeq ($(CONFIG_OF_SEPARATE),y)
 850 u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
 851         $(call if_changed,cat)
 852
 853 u-boot.bin: u-boot-dtb.bin FORCE
 854         $(call if_changed,copy)
 855 else
 856 u-boot.bin: u-boot-nodtb.bin FORCE
 857         $(call if_changed,copy)
 858 endif
 859
 860 %.imx: %.bin
 861         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 862
 863 %.vyb: %.imx
 864         $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
 865
 866 quiet_cmd_copy = COPY    $@
 867       cmd_copy = cp $< $@
 868
 869 u-boot.dtb: dts/dt.dtb
 870         $(call cmd,copy)
 871
 872 OBJCOPYFLAGS_u-boot.hex := -O ihex
 873
 874 OBJCOPYFLAGS_u-boot.srec := -O srec
 875
 876 u-boot.hex u-boot.srec: u-boot FORCE
 877         $(call if_changed,objcopy)
 878
 879 OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
 880                 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
 881
 882 binary_size_check: u-boot-nodtb.bin FORCE
 883         @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
 884         map_size=$(shell cat u-boot.map | \
 885                 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
 886                 | sed 's/0X//g' \
 887                 | bc); \
 888         if [ "" != "$$map_size" ]; then \
 889                 if test $$map_size -ne $$file_size; then \
 890                         echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
 891                         echo "  but u-boot-nodtb.bin shows $$file_size" >&2 ; \
 892                         exit 1; \
 893                 fi \
 894         fi
 895
 896 u-boot-nodtb.bin: u-boot FORCE
 897         $(call if_changed,objcopy)
 898         $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
 899         $(BOARD_SIZE_CHECK)
 900
 901 u-boot.ldr:     u-boot
 902                 $(CREATE_LDR_ENV)
 903                 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
 904                 $(BOARD_SIZE_CHECK)
 905
 906 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
 907
 908 OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 909
 910 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
 911         $(call if_changed,objcopy)
 912
 913 #
 914 # U-Boot entry point, needed for booting of full-blown U-Boot
 915 # from the SPL U-Boot version.
 916 #
 917 ifndef CONFIG_SYS_UBOOT_START
 918 CONFIG_SYS_UBOOT_START := 0
 919 endif
 920
 921 # Create a file containing the configuration options the image was built with
 922 quiet_cmd_cpp_cfg = CFG     $@
 923 cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
 924         -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
 925
 926 ifdef CONFIG_SPL_LOAD_FIT
 927 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 928         -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 929         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 930         $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
 931 else
 932 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
 933         -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 934         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 935 endif
 936
 937 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
 938
 939 MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
 940         -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 941
 942 MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
 943         -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 944
 945 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 946                 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 947
 948 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
 949                 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
 950         $(call if_changed,mkimage)
 951
 952 u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
 953         $(call if_changed,mkimage)
 954
 955 u-boot.sha1:    u-boot.bin
 956                 tools/ubsha1 u-boot.bin
 957
 958 u-boot.dis:     u-boot
 959                 $(OBJDUMP) -d $< > $@
 960
 961 ifdef CONFIG_TPL
 962 SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
 963 else
 964 SPL_PAYLOAD := u-boot.bin
 965 endif
 966
 967 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 968                                    --pad-to=$(CONFIG_SPL_PAD_TO)
 969 u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
 970         $(call if_changed,pad_cat)
 971
 972 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
 973
 974 lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
 975         $(call if_changed,mkimage)
 976
 977 OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
 978
 979 lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
 980         $(call if_changed,objcopy)
 981
 982 OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
 983
 984 lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
 985         $(call if_changed,objcopy)
 986
 987 lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
 988         $(call if_changed,cat)
 989
 990 CLEAN_FILES += lpc32xx-*
 991
 992 OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
 993                                    --pad-to=$(CONFIG_TPL_PAD_TO)
 994 tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
 995         $(call if_changed,pad_cat)
 996
 997 SPL: spl/u-boot-spl.bin FORCE
 998         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 999
1000 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
1001         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
1002
1003 MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
1004
1005 u-boot.ubl: u-boot-with-spl.bin FORCE
1006         $(call if_changed,mkimage)
1007
1008 MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
1009         $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
1010         -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1011 spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1012         $(call if_changed,mkimage)
1013
1014 OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1015 u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1016         $(call if_changed,pad_cat)
1017
1018 u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1019         $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
1020 u-boot.sb: u-boot.bin spl/u-boot-spl.bin
1021         $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
1022
1023 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
1024 # Both images are created using mkimage (crc etc), so that the ROM
1025 # bootloader can check its integrity. Padding needs to be done to the
1026 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
1027 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
1028 # The resulting image containing both U-Boot images is called u-boot.spr
1029 MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1030         -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1031 spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1032         $(call if_changed,mkimage)
1033
1034 OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1035                           --gap-fill=0xff
1036 u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1037         $(call if_changed,pad_cat)
1038
1039 ifneq ($(CONFIG_ARCH_SOCFPGA),)
1040 quiet_cmd_socboot = SOCBOOT $@
1041 cmd_socboot = cat       spl/u-boot-spl.sfp spl/u-boot-spl.sfp   \
1042                         spl/u-boot-spl.sfp spl/u-boot-spl.sfp   \
1043                         u-boot.img > $@ || rm -f $@
1044 u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
1045         $(call if_changed,socboot)
1046 endif
1047
1048 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1049 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1050 # the middle.
1051 ifneq ($(CONFIG_X86_RESET_VECTOR),)
1052 rom: u-boot.rom FORCE
1053
1054 IFDTOOL=$(objtree)/tools/ifdtool
1055 IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
1056 IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
1057 IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
1058 IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
1059 IFDTOOL_FLAGS += -C
1060
1061 ifneq ($(CONFIG_HAVE_INTEL_ME),)
1062 IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
1063 IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
1064 endif
1065
1066 ifneq ($(CONFIG_HAVE_MRC),)
1067 IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
1068 endif
1069
1070 ifneq ($(CONFIG_HAVE_FSP),)
1071 IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
1072 endif
1073
1074 ifneq ($(CONFIG_HAVE_CMC),)
1075 IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
1076 endif
1077
1078 ifneq ($(CONFIG_HAVE_VGA_BIOS),)
1079 IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
1080 endif
1081
1082 ifneq ($(CONFIG_HAVE_REFCODE),)
1083 IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
1084 endif
1085
1086 quiet_cmd_ifdtool = IFDTOOL $@
1087 cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
1088 ifneq ($(CONFIG_HAVE_INTEL_ME),)
1089 cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
1090 endif
1091 cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
1092 cmd_ifdtool += mv u-boot.tmp $@
1093
1094 refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
1095         $(call if_changed,copy)
1096
1097 quiet_cmd_ldr = LD      $@
1098 cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1099                $(filter-out FORCE,$^) -o $@
1100
1101 u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
1102                 $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
1103         $(call if_changed,ifdtool)
1104
1105 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1106 u-boot-x86-16bit.bin: u-boot FORCE
1107         $(call if_changed,objcopy)
1108 endif
1109
1110 ifneq ($(CONFIG_ARCH_SUNXI),)
1111 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
1112                                    --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
1113 u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
1114         $(call if_changed,pad_cat)
1115 endif
1116
1117 ifneq ($(CONFIG_TEGRA),)
1118 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1119 u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
1120         $(call if_changed,pad_cat)
1121
1122 OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1123 u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
1124         $(call if_changed,pad_cat)
1125
1126 u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
1127         $(call if_changed,copy)
1128 endif
1129
1130 OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1131 u-boot-app.efi: u-boot FORCE
1132         $(call if_changed,zobjcopy)
1133
1134 u-boot.bin.o: u-boot.bin FORCE
1135         $(call if_changed,efipayload)
1136
1137 u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1138         $(call if_changed_dep,cpp_lds)
1139
1140 # Rule to link the EFI payload which contains a stub and a U-Boot binary
1141 quiet_cmd_u-boot_payload ?= LD      $@
1142       cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
1143       -T u-boot-payload.lds arch/x86/cpu/call32.o \
1144       lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
1145       $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
1146
1147 u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
1148         $(call if_changed,u-boot_payload)
1149
1150 OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1151 u-boot-payload.efi: u-boot-payload FORCE
1152         $(call if_changed,zobjcopy)
1153
1154 u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1155         $(call if_changed,cat)
1156
1157 #Add a target to create boot binary having SPL binary in PBI format
1158 #concatenated with u-boot binary. It is need by PowerPC SoC having
1159 #internal SRAM <= 512KB.
1160 MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1161                 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1162                 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
1163
1164 spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1165         $(call if_changed,mkimage)
1166
1167 ifeq ($(ARCH),arm)
1168 UBOOT_BINLOAD := u-boot.img
1169 else
1170 UBOOT_BINLOAD := u-boot.bin
1171 endif
1172
1173 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1174                           --gap-fill=0xff
1175
1176 u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
1177         $(call if_changed,pad_cat)
1178
1179 # PPC4xx needs the SPL at the end of the image, since the reset vector
1180 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1181 # and need to introduce a new build target with the full blown U-Boot
1182 # at the start padded up to the start of the SPL image. And then concat
1183 # the SPL image to the end.
1184
1185 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1186         --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1187 u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1188         $(call if_changed,pad_cat)
1189
1190 # Create a new ELF from a raw binary file.  This is useful for arm64
1191 # where static relocation needs to be performed on the raw binary,
1192 # but certain simulators only accept an ELF file (but don't do the
1193 # relocation).
1194 # FIXME refactor dts/Makefile to share target/arch detection
1195 u-boot.elf: u-boot.bin
1196         @$(OBJCOPY)  -B aarch64 -I binary -O elf64-littleaarch64 \
1197                 $< u-boot-elf.o
1198         @$(LD) u-boot-elf.o -o $@ \
1199                 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
1200                 -Ttext=$(CONFIG_SYS_TEXT_BASE)
1201
1202 # Rule to link u-boot
1203 # May be overridden by arch/$(ARCH)/config.mk
1204 quiet_cmd_u-boot__ ?= LD      $@
1205       cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1206       -T u-boot.lds $(u-boot-init)                             \
1207       --start-group $(u-boot-main) --end-group                 \
1208       $(PLATFORM_LIBS) -Map u-boot.map
1209
1210 quiet_cmd_smap = GEN     common/system_map.o
1211 cmd_smap = \
1212         smap=`$(call SYSTEM_MAP,u-boot) | \
1213                 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1214         $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1215                 -c $(srctree)/common/system_map.c -o common/system_map.o
1216
1217 u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
1218         $(call if_changed,u-boot__)
1219 ifeq ($(CONFIG_KALLSYMS),y)
1220         $(call cmd,smap)
1221         $(call cmd,u-boot__) common/system_map.o
1222 endif
1223
1224 quiet_cmd_sym ?= SYM     $@
1225       cmd_sym ?= $(OBJDUMP) -t $< > $@
1226 u-boot.sym: u-boot FORCE
1227         $(call if_changed,sym)
1228
1229 # The actual objects are generated when descending,
1230 # make sure no implicit rule kicks in
1231 $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
1232
1233 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1234 # Preset locale variables to speed up the build process. Limit locale
1235 # tweaks to this spot to avoid wrong language settings when running
1236 # make menuconfig etc.
1237 # Error messages still appears in the original language
1238
1239 PHONY += $(u-boot-dirs)
1240 $(u-boot-dirs): prepare scripts
1241         $(Q)$(MAKE) $(build)=$@
1242
1243 tools: prepare
1244 # The "tools" are needed early
1245 $(filter-out tools, $(u-boot-dirs)): tools
1246 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1247 # is "yes"), so compile examples after U-Boot is compiled.
1248 examples: $(filter-out examples, $(u-boot-dirs))
1249
1250 define filechk_uboot.release
1251         echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1252 endef
1253
1254 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1255 include/config/uboot.release: include/config/auto.conf FORCE
1256         $(call filechk,uboot.release)
1257
1258
1259 # Things we need to do before we recursively start building the kernel
1260 # or the modules are listed in "prepare".
1261 # A multi level approach is used. prepareN is processed before prepareN-1.
1262 # archprepare is used in arch Makefiles and when processed asm symlink,
1263 # version.h and scripts_basic is processed / created.
1264
1265 # Listed in dependency order
1266 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1267
1268 # prepare3 is used to check if we are building in a separate output directory,
1269 # and if so do:
1270 # 1) Check that make has not been executed in the kernel src $(srctree)
1271 prepare3: include/config/uboot.release
1272 ifneq ($(KBUILD_SRC),)
1273         @$(kecho) '  Using $(srctree) as source for U-Boot'
1274         $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1275                 echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
1276                 echo >&2 "  in the '$(srctree)' directory.";\
1277                 /bin/false; \
1278         fi;
1279 endif
1280
1281 # prepare2 creates a makefile if using a separate output directory
1282 prepare2: prepare3 outputmakefile
1283
1284 prepare1: prepare2 $(version_h) $(timestamp_h) \
1285                    include/config/auto.conf
1286 ifeq ($(wildcard $(LDSCRIPT)),)
1287         @echo >&2 "  Could not find linker script."
1288         @/bin/false
1289 endif
1290
1291 archprepare: prepare1 scripts_basic
1292
1293 prepare0: archprepare FORCE
1294         $(Q)$(MAKE) $(build)=.
1295
1296 # All the preparing..
1297 prepare: prepare0
1298
1299 # Generate some files
1300 # ---------------------------------------------------------------------------
1301
1302 define filechk_version.h
1303         (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1304         echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1305         echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1306         echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
1307 endef
1308
1309 # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1310 # The BSD date on the other hand behaves different and would produce errors
1311 # with the misused '-d' switch.  Respect that and search a working date with
1312 # well known pre- and suffixes for the GNU variant of date.
1313 define filechk_timestamp.h
1314         (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1315                 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
1316                 DATE=""; \
1317                 for date in gdate date.gnu date; do \
1318                         $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1319                 done; \
1320                 if test -n "$${DATE}"; then \
1321                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1322                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1323                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
1324                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1325                 else \
1326                         return 42; \
1327                 fi; \
1328         else \
1329                 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1330                 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1331                 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
1332                 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1333         fi)
1334 endef
1335
1336 $(version_h): include/config/uboot.release FORCE
1337         $(call filechk,version.h)
1338
1339 $(timestamp_h): $(srctree)/Makefile FORCE
1340         $(call filechk,timestamp.h)
1341
1342 # ---------------------------------------------------------------------------
1343 quiet_cmd_cpp_lds = LDS     $@
1344 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
1345                 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
1346
1347 u-boot.lds: $(LDSCRIPT) prepare FORCE
1348         $(call if_changed_dep,cpp_lds)
1349
1350 spl/u-boot-spl.bin: spl/u-boot-spl
1351         @:
1352 spl/u-boot-spl: tools prepare \
1353                 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
1354         $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
1355
1356 spl/sunxi-spl.bin: spl/u-boot-spl
1357         @:
1358
1359 spl/u-boot-spl.sfp: spl/u-boot-spl
1360         @:
1361
1362 spl/boot.bin: spl/u-boot-spl
1363         @:
1364
1365 tpl/u-boot-tpl.bin: tools prepare
1366         $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
1367
1368 TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
1369
1370 FIND := find
1371 FINDFLAGS := -L
1372
1373 tags ctags:
1374                 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1375                                                 -name '*.[chS]' -print`
1376                 ln -s ctags tags
1377
1378 etags:
1379                 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1380                                                 -name '*.[chS]' -print`
1381 cscope:
1382                 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1383                                                 cscope.files
1384                 cscope -b -q -k
1385
1386 SYSTEM_MAP = \
1387                 $(NM) $1 | \
1388                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1389                 LC_ALL=C sort
1390 System.map:     u-boot
1391                 @$(call SYSTEM_MAP,$<) > $@
1392
1393 checkdtc:
1394         @if test $(call dtc-version) -lt 0104; then \
1395                 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1396                 false; \
1397         fi
1398
1399 #########################################################################
1400
1401 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1402 # R_AARCH64_RELATIVE (64-bit).
1403 checkarmreloc: u-boot
1404         @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1405                 grep R_A | sort -u`"; \
1406         if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1407                  "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1408                 echo "$< contains unexpected relocations: $$RELOC"; \
1409                 false; \
1410         fi
1411
1412 env: scripts_basic
1413         $(Q)$(MAKE) $(build)=tools/$@
1414
1415 tools-only: scripts_basic $(version_h) $(timestamp_h)
1416         $(Q)$(MAKE) $(build)=tools
1417
1418 tools-all: export HOST_TOOLS_ALL=y
1419 tools-all: env tools ;
1420
1421 cross_tools: export CROSS_BUILD_TOOLS=y
1422 cross_tools: tools ;
1423
1424 .PHONY : CHANGELOG
1425 CHANGELOG:
1426         git log --no-merges U-Boot-1_1_5.. | \
1427         unexpand -a | sed -e 's/\s\s*$$//' > $@
1428
1429 #########################################################################
1430
1431 ###
1432 # Cleaning is done on three levels.
1433 # make clean     Delete most generated files
1434 #                Leave enough to build external modules
1435 # make mrproper  Delete the current configuration, and all generated files
1436 # make distclean Remove editor backup files, patch leftover files and the like
1437
1438 # Directories & files removed with 'make clean'
1439 CLEAN_DIRS  += $(MODVERDIR) \
1440                $(foreach d, spl tpl, $(patsubst %,$d/%, \
1441                         $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
1442
1443 CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \
1444                boot* u-boot* MLO* SPL System.map
1445
1446 # Directories & files removed with 'make mrproper'
1447 MRPROPER_DIRS  += include/config include/generated spl tpl \
1448                   .tmp_objdiff
1449 MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1450                   ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1451
1452 # clean - Delete most, but leave enough to build external modules
1453 #
1454 clean: rm-dirs  := $(CLEAN_DIRS)
1455 clean: rm-files := $(CLEAN_FILES)
1456
1457 clean-dirs      := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
1458
1459 clean-dirs      := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
1460
1461 PHONY += $(clean-dirs) clean archclean
1462 $(clean-dirs):
1463         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1464
1465 # TODO: Do not use *.cfgtmp
1466 clean: $(clean-dirs)
1467         $(call cmd,rmdirs)
1468         $(call cmd,rmfiles)
1469         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1470                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1471                 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1472                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1473                 -o -name '*.symtypes' -o -name 'modules.order' \
1474                 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1475                 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
1476                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1477
1478 # mrproper - Delete all generated files, including .config
1479 #
1480 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1481 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1482 mrproper-dirs      := $(addprefix _mrproper_,scripts)
1483
1484 PHONY += $(mrproper-dirs) mrproper archmrproper
1485 $(mrproper-dirs):
1486         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1487
1488 mrproper: clean $(mrproper-dirs)
1489         $(call cmd,rmdirs)
1490         $(call cmd,rmfiles)
1491         @rm -f arch/*/include/asm/arch
1492
1493 # distclean
1494 #
1495 PHONY += distclean
1496
1497 distclean: mrproper
1498         @find $(srctree) $(RCS_FIND_IGNORE) \
1499                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1500                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1501                 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1502                 -o -name '*.pyc' \) \
1503                 -type f -print | xargs rm -f
1504         @rm -f boards.cfg
1505
1506 backup:
1507         F=`basename $(srctree)` ; cd .. ; \
1508         gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1509
1510 help:
1511         @echo  'Cleaning targets:'
1512         @echo  '  clean           - Remove most generated files but keep the config'
1513         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1514         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1515         @echo  ''
1516         @echo  'Configuration targets:'
1517         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1518         @echo  ''
1519         @echo  'Other generic targets:'
1520         @echo  '  all             - Build all necessary images depending on configuration'
1521         @echo  '  tests           - Build U-Boot for sandbox and run tests'
1522         @echo  '* u-boot          - Build the bare u-boot'
1523         @echo  '  dir/            - Build all files in dir and below'
1524         @echo  '  dir/file.[oisS] - Build specified target only'
1525         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1526         @echo  '                    (requires a recent binutils and recent build (System.map))'
1527         @echo  '  tags/ctags      - Generate ctags file for editors'
1528         @echo  '  etags           - Generate etags file for editors'
1529         @echo  '  cscope          - Generate cscope index'
1530         @echo  '  ubootrelease    - Output the release version string (use with make -s)'
1531         @echo  '  ubootversion    - Output the version stored in Makefile (use with make -s)'
1532         @echo  "  cfg             - Don't build, just create the .cfg files"
1533         @echo  ''
1534         @echo  'Static analysers'
1535         @echo  '  checkstack      - Generate a list of stack hogs'
1536         @echo  ''
1537         @echo  'Documentation targets:'
1538         @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1539         @echo  ''
1540         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1541         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1542         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1543         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1544         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1545         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1546         @echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1547         @echo  '                1: warnings which may be relevant and do not occur too often'
1548         @echo  '                2: warnings which occur quite often but may still be relevant'
1549         @echo  '                3: more obscure warnings, can most likely be ignored'
1550         @echo  '                Multiple levels can be combined with W=12 or W=123'
1551         @echo  ''
1552         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1553         @echo  'For further info see the ./README file'
1554
1555 tests:
1556         $(srctree)/test/run
1557
1558 # Documentation targets
1559 # ---------------------------------------------------------------------------
1560 %docs: scripts_basic FORCE
1561         $(Q)$(MAKE) $(build)=scripts build_docproc
1562         $(Q)$(MAKE) $(build)=doc/DocBook $@
1563
1564 # Dummies...
1565 PHONY += prepare scripts
1566 prepare: ;
1567 scripts: ;
1568
1569 endif #ifeq ($(config-targets),1)
1570 endif #ifeq ($(mixed-targets),1)
1571
1572 PHONY += checkstack ubootrelease ubootversion
1573
1574 checkstack:
1575         $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1576         $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1577
1578 ubootrelease:
1579         @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1580
1581 ubootversion:
1582         @echo $(UBOOTVERSION)
1583
1584 # Single targets
1585 # ---------------------------------------------------------------------------
1586 # Single targets are compatible with:
1587 # - build with mixed source and output
1588 # - build with separate output dir 'make O=...'
1589 # - external modules
1590 #
1591 #  target-dir => where to store outputfile
1592 #  build-dir  => directory in kernel source tree to use
1593
1594 ifeq ($(KBUILD_EXTMOD),)
1595         build-dir  = $(patsubst %/,%,$(dir $@))
1596         target-dir = $(dir $@)
1597 else
1598         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1599         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1600         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1601 endif
1602
1603 %.s: %.c prepare scripts FORCE
1604         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1605 %.i: %.c prepare scripts FORCE
1606         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1607 %.o: %.c prepare scripts FORCE
1608         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1609 %.lst: %.c prepare scripts FORCE
1610         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1611 %.s: %.S prepare scripts FORCE
1612         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1613 %.o: %.S prepare scripts FORCE
1614         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1615 %.symtypes: %.c prepare scripts FORCE
1616         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1617
1618 # Modules
1619 /: prepare scripts FORCE
1620         $(cmd_crmodverdir)
1621         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1622         $(build)=$(build-dir)
1623 %/: prepare scripts FORCE
1624         $(cmd_crmodverdir)
1625         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1626         $(build)=$(build-dir)
1627 %.ko: prepare scripts FORCE
1628         $(cmd_crmodverdir)
1629         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1630         $(build)=$(build-dir) $(@:.ko=.o)
1631         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1632
1633 # FIXME Should go into a make.lib or something
1634 # ===========================================================================
1635
1636 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1637       cmd_rmdirs = rm -rf $(rm-dirs)
1638
1639 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1640       cmd_rmfiles = rm -f $(rm-files)
1641
1642 # read all saved command lines
1643
1644 targets := $(wildcard $(sort $(targets)))
1645 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1646
1647 ifneq ($(cmd_files),)
1648   $(cmd_files): ;       # Do not try to update included dependency files
1649   include $(cmd_files)
1650 endif
1651
1652 endif   # skip-makefile
1653
1654 PHONY += FORCE
1655 FORCE:
1656
1657 # Declare the contents of the .PHONY variable as phony.  We keep that
1658 # information in a variable so we can use it in if_changed and friends.
1659 .PHONY: $(PHONY)