Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 11
  26 SUBLEVEL =
  27 EXTRAVERSION =
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 endif
 234 ifeq ($(CPU),mpc86xx)
 235 LIBS += cpu/mpc8xxx/ddr/libddr.a
 236 LIBS += cpu/mpc8xxx/lib8xxx.a
 237 endif
 238 LIBS += drivers/rtc/librtc.a
 239 LIBS += drivers/serial/libserial.a
 240 LIBS += drivers/twserial/libtws.a
 241 LIBS += drivers/usb/gadget/libusb_gadget.a
 242 LIBS += drivers/usb/host/libusb_host.a
 243 LIBS += drivers/usb/musb/libusb_musb.a
 244 LIBS += drivers/usb/phy/libusb_phy.a
 245 LIBS += drivers/video/libvideo.a
 246 LIBS += drivers/watchdog/libwatchdog.a
 247 LIBS += common/libcommon.a
 248 LIBS += libfdt/libfdt.a
 249 LIBS += api/libapi.a
 250 LIBS += post/libpost.a
 251
 252 LIBS := $(addprefix $(obj),$(LIBS))
 253 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 254
 255 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 256 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 257
 258 # Add GCC lib
 259 ifdef USE_PRIVATE_LIBGCC
 260 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 261 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 262 else
 263 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 264 endif
 265 else
 266 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 267 endif
 268 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 269 export PLATFORM_LIBS
 270
 271 # Special flags for CPP when processing the linker script.
 272 # Pass the version down so we can handle backwards compatibility
 273 # on the fly.
 274 LDPPFLAGS += \
 275         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 276         $(shell $(LD) --version | \
 277           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 278
 279 ifeq ($(CONFIG_NAND_U_BOOT),y)
 280 NAND_SPL = nand_spl
 281 U_BOOT_NAND = $(obj)u-boot-nand.bin
 282 endif
 283
 284 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 285 ONENAND_IPL = onenand_ipl
 286 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 287 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 288 endif
 289
 290 __OBJS := $(subst $(obj),,$(OBJS))
 291 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 292
 293 #########################################################################
 294 #########################################################################
 295
 296 # Always append ALL so that arch config.mk's can add custom ones
 297 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 298
 299 all:            $(ALL)
 300
 301 $(obj)u-boot.hex:       $(obj)u-boot
 302                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 303
 304 $(obj)u-boot.srec:      $(obj)u-boot
 305                 $(OBJCOPY) -O srec $< $@
 306
 307 $(obj)u-boot.bin:       $(obj)u-boot
 308                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 309
 310 $(obj)u-boot.ldr:       $(obj)u-boot
 311                 $(CREATE_LDR_ENV)
 312                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 313
 314 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 315                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 316
 317 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 318                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 319
 320 $(obj)u-boot.img:       $(obj)u-boot.bin
 321                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 322                 -a $(TEXT_BASE) -e 0 \
 323                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 324                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 325                 -d $< $@
 326
 327 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 328                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 329                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 330
 331 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 332                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 333
 334 $(obj)u-boot.dis:       $(obj)u-boot
 335                 $(OBJDUMP) -d $< > $@
 336
 337 GEN_UBOOT = \
 338                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 339                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 340                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 341                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 342                         -Map u-boot.map -o u-boot
 343 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 344                 $(GEN_UBOOT)
 345 ifeq ($(CONFIG_KALLSYMS),y)
 346                 smap=`$(call SYSTEM_MAP,u-boot) | \
 347                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 348                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 349                         -c common/system_map.c -o $(obj)common/system_map.o
 350                 $(GEN_UBOOT) $(obj)common/system_map.o
 351 endif
 352
 353 $(OBJS):        depend
 354                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 355
 356 $(LIBS):        depend $(SUBDIRS)
 357                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 358
 359 $(LIBBOARD):    depend $(LIBS)
 360                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 361
 362 $(SUBDIRS):     depend
 363                 $(MAKE) -C $@ all
 364
 365 $(LDSCRIPT):    depend
 366                 $(MAKE) -C $(dir $@) $(notdir $@)
 367
 368 $(obj)u-boot.lds: $(LDSCRIPT)
 369                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 370
 371 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 372                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 373
 374 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 375                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 376
 377 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 378                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 379
 380 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 381                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 382
 383 $(VERSION_FILE):
 384                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 385                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 386                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 387
 388 $(TIMESTAMP_FILE):
 389                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 390                 @date +'#define U_BOOT_TIME "%T"' >> $@
 391
 392 gdbtools:
 393                 $(MAKE) -C tools/gdb all || exit 1
 394
 395 updater:
 396                 $(MAKE) -C tools/updater all || exit 1
 397
 398 env:
 399                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 400
 401 # Explicitly make _depend in subdirs containing multiple targets to prevent
 402 # parallel sub-makes creating .depend files simultaneously.
 403 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 404                 for dir in $(SUBDIRS) cpu/$(CPU) $(dir $(LDSCRIPT)) ; do \
 405                         $(MAKE) -C $$dir _depend ; done
 406
 407 TAG_SUBDIRS = $(SUBDIRS)
 408 TAG_SUBDIRS += $(dir $(__LIBS))
 409 TAG_SUBDIRS += include
 410
 411 tags ctags:
 412                 ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
 413                                                 -name '*.[chS]' -print`
 414
 415 etags:
 416                 etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
 417                                                 -name '*.[chS]' -print`
 418 cscope:
 419                 find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
 420                 cscope -b -q -k
 421
 422 SYSTEM_MAP = \
 423                 $(NM) $1 | \
 424                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 425                 LC_ALL=C sort
 426 $(obj)System.map:       $(obj)u-boot
 427                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 428
 429 #
 430 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 431 #
 432 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 433 # the dep file is only include in this top level makefile to determine when
 434 # to regenerate the autoconf.mk file.
 435 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 436         @$(XECHO) Generating $@ ; \
 437         set -e ; \
 438         : Generate the dependancies ; \
 439         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 440                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 441
 442 $(obj)include/autoconf.mk: $(obj)include/config.h
 443         @$(XECHO) Generating $@ ; \
 444         set -e ; \
 445         : Extract the config macros ; \
 446         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 447                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 448         mv $@.tmp $@
 449
 450 #########################################################################
 451 else    # !config.mk
 452 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 453 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 454 $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \
 455 updater env depend dep tags ctags etags cscope $(obj)System.map:
 456         @echo "System not configured - see README" >&2
 457         @ exit 1
 458
 459 tools:
 460         $(MAKE) -C tools
 461 tools-all:
 462         $(MAKE) -C tools HOST_TOOLS_ALL=y
 463 endif   # config.mk
 464
 465 .PHONY : CHANGELOG
 466 CHANGELOG:
 467         git log --no-merges U-Boot-1_1_5.. | \
 468         unexpand -a | sed -e 's/\s\s*$$//' > $@
 469
 470 include/license.h: tools/bin2header COPYING
 471          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 472 #########################################################################
 473
 474 unconfig:
 475         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 476                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 477                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 478
 479 %: %_config
 480         $(MAKE)
 481
 482 #========================================================================
 483 # PowerPC
 484 #========================================================================
 485
 486 #########################################################################
 487 ## MPC5xx Systems
 488 #########################################################################
 489
 490 canmb_config:   unconfig
 491         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 492
 493 cmi_mpc5xx_config:      unconfig
 494         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 495
 496 PATI_config:            unconfig
 497         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 498
 499 #########################################################################
 500 ## MPC5xxx Systems
 501 #########################################################################
 502
 503 aev_config: unconfig
 504         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 505
 506 BC3450_config:  unconfig
 507         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 508
 509 cm5200_config:  unconfig
 510         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 511
 512 cpci5200_config:  unconfig
 513         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 514
 515 digsy_mtc_config \
 516 digsy_mtc_LOWBOOT_config        \
 517 digsy_mtc_RAMBOOT_config:       unconfig
 518         @mkdir -p $(obj)include
 519         @mkdir -p $(obj)board/digsy_mtc
 520         @ >$(obj)include/config.h
 521         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 522                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 523                   echo "... with LOWBOOT configuration" ; \
 524                 }
 525         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 526                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 527                   echo "... with RAMBOOT configuration" ; \
 528                 }
 529         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 530
 531 galaxy5200_LOWBOOT_config \
 532 galaxy5200_config:      unconfig
 533         @mkdir -p $(obj)include
 534         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 535         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 536
 537 hmi1001_config: unconfig
 538         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 539
 540 Lite5200_config                         \
 541 Lite5200_LOWBOOT_config                 \
 542 Lite5200_LOWBOOT08_config               \
 543 icecube_5200_config                     \
 544 icecube_5200_LOWBOOT_config             \
 545 icecube_5200_LOWBOOT08_config           \
 546 icecube_5200_DDR_config                 \
 547 icecube_5200_DDR_LOWBOOT_config         \
 548 icecube_5200_DDR_LOWBOOT08_config       \
 549 icecube_5100_config:                    unconfig
 550         @mkdir -p $(obj)include
 551         @mkdir -p $(obj)board/icecube
 552         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 553                 { if [ "$(findstring DDR,$@)" ] ; \
 554                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 555                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 556                   fi ; \
 557                   $(XECHO) "... with LOWBOOT configuration" ; \
 558                 }
 559         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 560                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 561                   echo "... with 8 MB flash only" ; \
 562                   $(XECHO) "... with LOWBOOT configuration" ; \
 563                 }
 564         @[ -z "$(findstring DDR,$@)" ] || \
 565                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 566                   $(XECHO) "... DDR memory revision" ; \
 567                 }
 568         @[ -z "$(findstring 5200,$@)" ] || \
 569                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 570                   $(XECHO) "... with MPC5200 processor" ; \
 571                 }
 572         @[ -z "$(findstring 5100,$@)" ] || \
 573                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 574                   $(XECHO) "... with MGT5100 processor" ; \
 575                 }
 576         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 577
 578 jupiter_config: unconfig
 579         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 580
 581 inka4x0_config: unconfig
 582         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 583
 584 ipek01_config: unconfig
 585         @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
 586
 587 lite5200b_config        \
 588 lite5200b_PM_config     \
 589 lite5200b_LOWBOOT_config:       unconfig
 590         @mkdir -p $(obj)include
 591         @mkdir -p $(obj)board/icecube
 592         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 593         @ $(XECHO) "... DDR memory revision"
 594         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 595         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 596         @[ -z "$(findstring _PM_,$@)" ] || \
 597                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 598                   $(XECHO) "... with power management (low-power mode) support" ; \
 599                 }
 600         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 601                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 602                   $(XECHO) "... with LOWBOOT configuration" ; \
 603                 }
 604         @ $(XECHO) "... with MPC5200B processor"
 605         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 606
 607 mcc200_config   \
 608 mcc200_SDRAM_config     \
 609 mcc200_highboot_config  \
 610 mcc200_COM12_config     \
 611 mcc200_COM12_SDRAM_config       \
 612 mcc200_COM12_highboot_config    \
 613 mcc200_COM12_highboot_SDRAM_config      \
 614 mcc200_highboot_SDRAM_config    \
 615 prs200_config   \
 616 prs200_DDR_config       \
 617 prs200_highboot_config  \
 618 prs200_highboot_DDR_config:     unconfig
 619         @mkdir -p $(obj)include
 620         @mkdir -p $(obj)board/mcc200
 621         @[ -n "$(findstring highboot,$@)" ] || \
 622                 { $(XECHO) "... with lowboot configuration" ; \
 623                 }
 624         @[ -z "$(findstring highboot,$@)" ] || \
 625                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 626                   $(XECHO) "... with highboot configuration" ; \
 627                 }
 628         @[ -n "$(findstring _SDRAM,$@)" ] || \
 629                 { if [ -n "$(findstring mcc200,$@)" ]; \
 630                   then \
 631                         $(XECHO) "... with DDR" ; \
 632                   else \
 633                         if [ -n "$(findstring _DDR,$@)" ];\
 634                         then \
 635                                 $(XECHO) "... with DDR" ; \
 636                         else \
 637                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 638                                 $(XECHO) "... with SDRAM" ; \
 639                         fi; \
 640                   fi; \
 641                 }
 642         @[ -z "$(findstring _SDRAM,$@)" ] || \
 643                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 644                   $(XECHO) "... with SDRAM" ; \
 645                 }
 646         @[ -z "$(findstring COM12,$@)" ] || \
 647                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 648                   $(XECHO) "... with console on COM12" ; \
 649                 }
 650         @[ -z "$(findstring prs200,$@)" ] || \
 651                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 652                 }
 653         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 654
 655 mecp5200_config:  unconfig
 656         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 657
 658 motionpro_config:       unconfig
 659         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 660
 661 mucmc52_config:         unconfig
 662         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 663
 664 munices_config: unconfig
 665         @$(MKCONFIG) munices ppc mpc5xxx munices
 666
 667 MVBC_P_config: unconfig
 668         @mkdir -p $(obj)include
 669         @mkdir -p $(obj)board/mvbc_p
 670         @ >$(obj)include/config.h
 671         @[ -z "$(findstring MVBC_P,$@)" ] || \
 672         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 673         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 674
 675 o2dnt_config:   unconfig
 676         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 677
 678 pcm030_config \
 679 pcm030_LOWBOOT_config:  unconfig
 680         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 681         @ >$(obj)include/config.h
 682         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 683                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 684                   echo "... with LOWBOOT configuration" ; \
 685                 }
 686         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 687
 688 pf5200_config:  unconfig
 689         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 690
 691 PM520_config \
 692 PM520_DDR_config \
 693 PM520_ROMBOOT_config \
 694 PM520_ROMBOOT_DDR_config:       unconfig
 695         @mkdir -p $(obj)include
 696         @[ -z "$(findstring DDR,$@)" ] || \
 697                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 698                   $(XECHO) "... DDR memory revision" ; \
 699                 }
 700         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 701                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 702                   $(XECHO) "... booting from 8-bit flash" ; \
 703                 }
 704         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 705
 706 smmaco4_config: unconfig
 707         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 708
 709 spieval_config: unconfig
 710         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 711
 712 TB5200_B_config \
 713 TB5200_config:  unconfig
 714         @mkdir -p $(obj)include
 715         @[ -z "$(findstring _B,$@)" ] || \
 716                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 717                   $(XECHO) "... with MPC5200B processor" ; \
 718                 }
 719         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 720
 721 MINI5200_config \
 722 EVAL5200_config \
 723 TOP5200_config: unconfig
 724         @mkdir -p $(obj)include
 725         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 726         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 727
 728 Total5100_config                \
 729 Total5200_config                \
 730 Total5200_lowboot_config        \
 731 Total5200_Rev2_config           \
 732 Total5200_Rev2_lowboot_config:  unconfig
 733         @mkdir -p $(obj)include
 734         @mkdir -p $(obj)board/total5200
 735         @[ -z "$(findstring 5100,$@)" ] || \
 736                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 737                   $(XECHO) "... with MGT5100 processor" ; \
 738                 }
 739         @[ -z "$(findstring 5200,$@)" ] || \
 740                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 741                   $(XECHO) "... with MPC5200 processor" ; \
 742                 }
 743         @[ -n "$(findstring Rev,$@)" ] || \
 744                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 745                   $(XECHO) "... revision 1 board" ; \
 746                 }
 747         @[ -z "$(findstring Rev2_,$@)" ] || \
 748                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 749                   $(XECHO) "... revision 2 board" ; \
 750                 }
 751         @[ -z "$(findstring lowboot_,$@)" ] || \
 752                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 753                   $(XECHO) "... with lowboot configuration" ; \
 754                 }
 755         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 756
 757 cam5200_config \
 758 cam5200_niosflash_config \
 759 fo300_config \
 760 MiniFAP_config \
 761 TQM5200S_config \
 762 TQM5200S_HIGHBOOT_config \
 763 TQM5200_B_config \
 764 TQM5200_B_HIGHBOOT_config \
 765 TQM5200_config  \
 766 TQM5200_STK100_config:  unconfig
 767         @mkdir -p $(obj)include
 768         @mkdir -p $(obj)board/tqc/tqm5200
 769         @[ -z "$(findstring cam5200,$@)" ] || \
 770                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 771                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 772                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 773                   $(XECHO) "... TQM5200S on Cam5200" ; \
 774                 }
 775         @[ -z "$(findstring niosflash,$@)" ] || \
 776                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 777                   $(XECHO) "... with NIOS flash driver" ; \
 778                 }
 779         @[ -z "$(findstring fo300,$@)" ] || \
 780                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 781                   $(XECHO) "... TQM5200 on FO300" ; \
 782                 }
 783         @[ -z "$(findstring MiniFAP,$@)" ] || \
 784                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 785                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 786                 }
 787         @[ -z "$(findstring STK100,$@)" ] || \
 788                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 789                   $(XECHO) "... on a STK52XX.100 base board" ; \
 790                 }
 791         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 792                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 793                 }
 794         @[ -z "$(findstring TQM5200S,$@)" ] || \
 795                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 796                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 797                 }
 798         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 799                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 800                 }
 801         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 802
 803 uc101_config:           unconfig
 804         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 805
 806 v38b_config: unconfig
 807         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 808
 809 #########################################################################
 810 ## MPC512x Systems
 811 #########################################################################
 812
 813 aria_config:    unconfig
 814         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 815
 816 mecp5123_config:        unconfig
 817         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 818
 819 mpc5121ads_config \
 820 mpc5121ads_rev2_config  \
 821         : unconfig
 822         @mkdir -p $(obj)include
 823         @if [ "$(findstring rev2,$@)" ] ; then \
 824                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 825         fi
 826         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 827
 828 #########################################################################
 829 ## MPC8xx Systems
 830 #########################################################################
 831
 832 Adder_config    \
 833 Adder87x_config \
 834 AdderII_config  \
 835         :               unconfig
 836         @mkdir -p $(obj)include
 837         $(if $(findstring AdderII,$@), \
 838         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 839         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 840
 841 AdderUSB_config:        unconfig
 842         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 843
 844 ADS860_config     \
 845 FADS823_config    \
 846 FADS850SAR_config \
 847 MPC86xADS_config  \
 848 MPC885ADS_config  \
 849 FADS860T_config:        unconfig
 850         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 851
 852 AMX860_config   :       unconfig
 853         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 854
 855 c2mon_config:           unconfig
 856         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 857
 858 CCM_config:             unconfig
 859         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 860
 861 cogent_mpc8xx_config:   unconfig
 862         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 863
 864 ELPT860_config:         unconfig
 865         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 866
 867 EP88x_config:           unconfig
 868         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 869
 870 ESTEEM192E_config:      unconfig
 871         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 872
 873 ETX094_config   :       unconfig
 874         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 875
 876 FLAGADM_config: unconfig
 877         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 878
 879 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 880
 881 GEN860T_SC_config       \
 882 GEN860T_config: unconfig
 883         @mkdir -p $(obj)include
 884         @[ -z "$(findstring _SC,$@)" ] || \
 885                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 886                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 887                 }
 888         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 889
 890 GENIETV_config: unconfig
 891         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 892
 893 GTH_config:     unconfig
 894         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 895
 896 hermes_config   :       unconfig
 897         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 898
 899 HMI10_config    :       unconfig
 900         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 901
 902 IAD210_config: unconfig
 903         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 904
 905 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 906
 907 ICU862_100MHz_config    \
 908 ICU862_config: unconfig
 909         @mkdir -p $(obj)include
 910         @[ -z "$(findstring _100MHz,$@)" ] || \
 911                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 912                   $(XECHO) "... with 100MHz system clock" ; \
 913                 }
 914         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 915
 916 IP860_config    :       unconfig
 917         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 918
 919 IVML24_256_config \
 920 IVML24_128_config \
 921 IVML24_config:  unconfig
 922         @mkdir -p $(obj)include
 923         @[ -z "$(findstring IVML24_config,$@)" ] || \
 924                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 925                  }
 926         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 927                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 928                  }
 929         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 930                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 931                  }
 932         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 933
 934 IVMS8_256_config \
 935 IVMS8_128_config \
 936 IVMS8_config:   unconfig
 937         @mkdir -p $(obj)include
 938         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 939                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 940                  }
 941         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 942                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 943                  }
 944         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 945                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 946                  }
 947         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 948
 949 kmsupx4_config:         unconfig
 950         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 951
 952 KUP4K_config    :       unconfig
 953         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 954
 955 KUP4X_config    :       unconfig
 956         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 957
 958 LANTEC_config   :       unconfig
 959         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 960
 961 lwmon_config:           unconfig
 962         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 963
 964 MBX_config      \
 965 MBX860T_config: unconfig
 966         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 967
 968 mgsuvd_config:          unconfig
 969         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 970
 971 MHPC_config:            unconfig
 972         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 973
 974 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 975
 976 NETVIA_V2_config \
 977 NETVIA_config:          unconfig
 978         @mkdir -p $(obj)include
 979         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 980                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
 981                   $(XECHO) "... Version 1" ; \
 982                  }
 983         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
 984                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
 985                   $(XECHO) "... Version 2" ; \
 986                  }
 987         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 988
 989 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
 990
 991 NETPHONE_V2_config \
 992 NETPHONE_config:        unconfig
 993         @mkdir -p $(obj)include
 994         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
 995                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
 996                  }
 997         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
 998                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
 999                  }
1000         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
1001
1002 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
1003
1004 NETTA_ISDN_6412_SWAPHOOK_config \
1005 NETTA_ISDN_SWAPHOOK_config \
1006 NETTA_6412_SWAPHOOK_config \
1007 NETTA_SWAPHOOK_config \
1008 NETTA_ISDN_6412_config \
1009 NETTA_ISDN_config \
1010 NETTA_6412_config \
1011 NETTA_config:           unconfig
1012         @mkdir -p $(obj)include
1013         @[ -z "$(findstring ISDN_,$@)" ] || \
1014                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1015                  }
1016         @[ -n "$(findstring ISDN_,$@)" ] || \
1017                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1018                  }
1019         @[ -z "$(findstring 6412_,$@)" ] || \
1020                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1021                  }
1022         @[ -n "$(findstring 6412_,$@)" ] || \
1023                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1024                  }
1025         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1026                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1027                  }
1028         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1029                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1030                  }
1031         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1032
1033 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1034
1035 NETTA2_V2_config \
1036 NETTA2_config:          unconfig
1037         @mkdir -p $(obj)include
1038         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1039                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1040                  }
1041         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1042                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1043                  }
1044         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1045
1046 NC650_Rev1_config \
1047 NC650_Rev2_config \
1048 CP850_config:   unconfig
1049         @mkdir -p $(obj)include
1050         @[ -z "$(findstring CP850,$@)" ] || \
1051                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1052                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1053                  }
1054         @[ -z "$(findstring Rev1,$@)" ] || \
1055                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1056                  }
1057         @[ -z "$(findstring Rev2,$@)" ] || \
1058                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1059                  }
1060         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1061
1062 NX823_config:           unconfig
1063         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1064
1065 pcu_e_config:           unconfig
1066         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1067
1068 QS850_config:   unconfig
1069         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1070
1071 QS823_config:   unconfig
1072         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1073
1074 QS860T_config:  unconfig
1075         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1076
1077 quantum_config: unconfig
1078         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1079
1080 R360MPI_config: unconfig
1081         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1082
1083 RBC823_config:  unconfig
1084         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1085
1086 RPXClassic_config:      unconfig
1087         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1088
1089 RPXlite_config:         unconfig
1090         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1091
1092 RPXlite_DW_64_config            \
1093 RPXlite_DW_LCD_config           \
1094 RPXlite_DW_64_LCD_config        \
1095 RPXlite_DW_NVRAM_config         \
1096 RPXlite_DW_NVRAM_64_config      \
1097 RPXlite_DW_NVRAM_LCD_config     \
1098 RPXlite_DW_NVRAM_64_LCD_config  \
1099 RPXlite_DW_config:      unconfig
1100         @mkdir -p $(obj)include
1101         @[ -z "$(findstring _64,$@)" ] || \
1102                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1103                   $(XECHO) "... with 64MHz system clock ..."; \
1104                 }
1105         @[ -z "$(findstring _LCD,$@)" ] || \
1106                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1107                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1108                   $(XECHO) "... with LCD display ..."; \
1109                 }
1110         @[ -z "$(findstring _NVRAM,$@)" ] || \
1111                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1112                   $(XECHO) "... with ENV in NVRAM ..."; \
1113                 }
1114         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1115
1116 rmu_config:     unconfig
1117         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1118
1119 RRvision_config:        unconfig
1120         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1121
1122 RRvision_LCD_config:    unconfig
1123         @mkdir -p $(obj)include
1124         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1125         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1126         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1127
1128 SM850_config    :       unconfig
1129         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1130
1131 spc1920_config:         unconfig
1132         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1133
1134 SPD823TS_config:        unconfig
1135         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1136
1137 stxxtc_config:  unconfig
1138         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1139
1140 svm_sc8xx_config:       unconfig
1141         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1142
1143 SXNI855T_config:        unconfig
1144         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1145
1146 # EMK MPC8xx based modules
1147 TOP860_config:          unconfig
1148         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1149
1150 # Play some tricks for configuration selection
1151 # Only 855 and 860 boards may come with FEC
1152 # and only 823 boards may have LCD support
1153 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1154
1155 FPS850L_config          \
1156 FPS860L_config          \
1157 NSCU_config             \
1158 TQM823L_config          \
1159 TQM823L_LCD_config      \
1160 TQM850L_config          \
1161 TQM855L_config          \
1162 TQM860L_config          \
1163 TQM862L_config          \
1164 TQM823M_config          \
1165 TQM850M_config          \
1166 TQM855M_config          \
1167 TQM860M_config          \
1168 TQM862M_config          \
1169 TQM866M_config          \
1170 TQM885D_config          \
1171 TK885D_config           \
1172 virtlab2_config:        unconfig
1173         @mkdir -p $(obj)include
1174         @[ -z "$(findstring _LCD,$@)" ] || \
1175                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1176                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1177                   $(XECHO) "... with LCD display" ; \
1178                 }
1179         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1180
1181 TTTech_config:  unconfig
1182         @mkdir -p $(obj)include
1183         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1184         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1185         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1186
1187 uc100_config    :       unconfig
1188         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1189
1190 v37_config:     unconfig
1191         @mkdir -p $(obj)include
1192         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1193         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1194         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1195
1196 wtk_config:     unconfig
1197         @mkdir -p $(obj)include
1198         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1199         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1200         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1201
1202 #########################################################################
1203 ## PPC4xx Systems
1204 #########################################################################
1205 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1206
1207 acadia_config:  unconfig
1208         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1209
1210 acadia_nand_config:     unconfig
1211         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1212         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1213         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1214         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1215         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1216         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1217
1218 ADCIOP_config:  unconfig
1219         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1220
1221 alpr_config:    unconfig
1222         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1223
1224 AP1000_config:unconfig
1225         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1226
1227 APC405_config:  unconfig
1228         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1229
1230 AR405_config:   unconfig
1231         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1232
1233 ASH405_config:  unconfig
1234         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1235
1236 bamboo_config:  unconfig
1237         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1238
1239 bamboo_nand_config:     unconfig
1240         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1241         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1242         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1243         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1244         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1245         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1246
1247 bubinga_config: unconfig
1248         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1249
1250 CANBT_config:   unconfig
1251         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1252
1253 # Arches, Canyonlands & Glacier use different U-Boot images
1254 arches_config \
1255 canyonlands_config \
1256 glacier_config: unconfig
1257         @mkdir -p $(obj)include
1258         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1259                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1260         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1261
1262 canyonlands_nand_config \
1263 glacier_nand_config:    unconfig
1264         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1265         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1266         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1267         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1268                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1269         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1270         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1271         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1272
1273 CATcenter_config        \
1274 CATcenter_25_config     \
1275 CATcenter_33_config:    unconfig
1276         @mkdir -p $(obj)include
1277         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1278         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1279         @[ -z "$(findstring _25,$@)" ] || \
1280                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1281                   $(XECHO) "SysClk = 25MHz" ; \
1282                 }
1283         @[ -z "$(findstring _33,$@)" ] || \
1284                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1285                   $(XECHO) "SysClk = 33MHz" ; \
1286                 }
1287         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1288
1289 CMS700_config:  unconfig
1290         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1291
1292 CPCI2DP_config: unconfig
1293         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1294
1295 CPCI405_config          \
1296 CPCI4052_config         \
1297 CPCI405DT_config        \
1298 CPCI405AB_config:       unconfig
1299         @mkdir -p $(obj)board/esd/cpci405
1300         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1301
1302 CPCIISER4_config:       unconfig
1303         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1304
1305 CRAYL1_config:  unconfig
1306         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1307
1308 csb272_config:  unconfig
1309         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1310
1311 csb472_config:  unconfig
1312         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1313
1314 DASA_SIM_config: unconfig
1315         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1316
1317 dlvision_config: unconfig
1318         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1319
1320 DP405_config:   unconfig
1321         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1322
1323 DU405_config:   unconfig
1324         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1325
1326 DU440_config:   unconfig
1327         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1328
1329 ebony_config:   unconfig
1330         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1331
1332 ERIC_config:    unconfig
1333         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1334
1335 EXBITGEN_config:        unconfig
1336         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1337
1338 fx12mm_flash_config: unconfig
1339         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1340         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1341         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1342                 > $(obj)board/avnet/fx12mm/config.tmp
1343         @echo "TEXT_BASE := 0xFFCB0000" \
1344                 >> $(obj)board/avnet/fx12mm/config.tmp
1345         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1346
1347 fx12mm_config: unconfig
1348         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1349         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1350         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1351                 > $(obj)board/avnet/fx12mm/config.tmp
1352         @echo "TEXT_BASE := 0x03000000" \
1353                 >> $(obj)board/avnet/fx12mm/config.tmp
1354         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1355
1356 G2000_config:   unconfig
1357         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1358
1359 gdppc440etx_config:     unconfig
1360         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1361
1362 hcu4_config:    unconfig
1363         @mkdir -p $(obj)board/netstal/common
1364         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1365
1366 hcu5_config:    unconfig
1367         @mkdir -p $(obj)board/netstal/common
1368         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1369
1370 HH405_config:   unconfig
1371         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1372
1373 HUB405_config:  unconfig
1374         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1375
1376 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1377 intip_config \
1378 devconcenter_config:    unconfig
1379         @mkdir -p $(obj)include
1380         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1381                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1382         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1383
1384 JSE_config:     unconfig
1385         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1386
1387 KAREF_config: unconfig
1388         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1389
1390 katmai_config:  unconfig
1391         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1392
1393 # Kilauea & Haleakala images are identical (recognized via PVR)
1394 kilauea_config \
1395 haleakala_config: unconfig
1396         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1397
1398 kilauea_nand_config \
1399 haleakala_nand_config: unconfig
1400         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1401         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1402         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1403         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1404         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1405         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1406
1407 korat_config:   unconfig
1408         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1409
1410 luan_config:    unconfig
1411         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1412
1413 lwmon5_config:  unconfig
1414         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1415
1416 makalu_config:  unconfig
1417         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1418
1419 mcu25_config:  unconfig
1420         @mkdir -p $(obj)board/netstal/common
1421         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1422
1423 METROBOX_config: unconfig
1424         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1425
1426 MIP405_config:  unconfig
1427         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1428
1429 MIP405T_config: unconfig
1430         @mkdir -p $(obj)include
1431         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1432         @$(XECHO) "Enable subset config for MIP405T"
1433         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1434
1435 ML2_config:     unconfig
1436         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1437
1438 ml300_config:   unconfig
1439         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1440
1441 ml507_flash_config: unconfig
1442         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1443         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1444         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1445                 > $(obj)board/xilinx/ml507/config.tmp
1446         @echo "TEXT_BASE := 0xFE360000" \
1447                 >> $(obj)board/xilinx/ml507/config.tmp
1448         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1449
1450 ml507_config: unconfig
1451         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1452         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1453         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1454                 > $(obj)board/xilinx/ml507/config.tmp
1455         @echo "TEXT_BASE := 0x04000000"  \
1456                 >> $(obj)board/xilinx/ml507/config.tmp
1457         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1458
1459 neo_config:     unconfig
1460         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1461
1462 ocotea_config:  unconfig
1463         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1464
1465 OCRTC_config            \
1466 ORSG_config:    unconfig
1467         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1468
1469 p3p440_config:  unconfig
1470         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1471
1472 PCI405_config:  unconfig
1473         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1474
1475 pcs440ep_config:        unconfig
1476         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1477
1478 PIP405_config:  unconfig
1479         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1480
1481 PLU405_config:  unconfig
1482         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1483
1484 PMC405_config:  unconfig
1485         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1486
1487 PMC405DE_config:        unconfig
1488         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1489
1490 PMC440_config:  unconfig
1491         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1492
1493 PPChameleonEVB_config           \
1494 PPChameleonEVB_BA_25_config     \
1495 PPChameleonEVB_ME_25_config     \
1496 PPChameleonEVB_HI_25_config     \
1497 PPChameleonEVB_BA_33_config     \
1498 PPChameleonEVB_ME_33_config     \
1499 PPChameleonEVB_HI_33_config:    unconfig
1500         @mkdir -p $(obj)include
1501         @[ -z "$(findstring EVB_BA,$@)" ] || \
1502                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1503                   $(XECHO) "... BASIC model" ; \
1504                 }
1505         @[ -z "$(findstring EVB_ME,$@)" ] || \
1506                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1507                   $(XECHO) "... MEDIUM model" ; \
1508                 }
1509         @[ -z "$(findstring EVB_HI,$@)" ] || \
1510                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1511                   $(XECHO) "... HIGH-END model" ; \
1512                 }
1513         @[ -z "$(findstring _25,$@)" ] || \
1514                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1515                   $(XECHO) "SysClk = 25MHz" ; \
1516                 }
1517         @[ -z "$(findstring _33,$@)" ] || \
1518                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1519                   $(XECHO) "SysClk = 33MHz" ; \
1520                 }
1521         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1522
1523 quad100hd_config:       unconfig
1524         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1525
1526 redwood_config: unconfig
1527         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1528
1529 sbc405_config:  unconfig
1530         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1531
1532 sc3_config:unconfig
1533         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1534
1535 sequoia_config \
1536 rainier_config: unconfig
1537         @mkdir -p $(obj)include
1538         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1539                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1540         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1541
1542 sequoia_nand_config \
1543 rainier_nand_config: unconfig
1544         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1545         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1546         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1547         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1548                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1549         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1550         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1551         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1552
1553 sequoia_ramboot_config \
1554 rainier_ramboot_config: unconfig
1555         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1556         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1557         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1558                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1559         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1560         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1561         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1562                 $(obj)board/amcc/sequoia/config.tmp
1563
1564 taihu_config:   unconfig
1565         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1566
1567 taishan_config: unconfig
1568         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1569
1570 v5fx30teval_config: unconfig
1571         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1572         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1573         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1574                 > $(obj)board/avnet/v5fx30teval/config.tmp
1575         @echo "TEXT_BASE := 0x03000000" \
1576                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1577         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1578
1579 v5fx30teval_flash_config: unconfig
1580         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1581         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1582         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1583                 > $(obj)board/avnet/v5fx30teval/config.tmp
1584         @echo "TEXT_BASE := 0xFF1C0000" \
1585                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1586         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1587
1588 VOH405_config:  unconfig
1589         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1590
1591 VOM405_config:  unconfig
1592         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1593
1594 W7OLMC_config   \
1595 W7OLMG_config: unconfig
1596         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1597
1598 # Walnut & Sycamore images are identical (recognized via PVR)
1599 walnut_config \
1600 sycamore_config: unconfig
1601         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1602
1603 WUH405_config:  unconfig
1604         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1605
1606 xilinx-ppc405-generic_flash_config: unconfig
1607         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1608         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1609                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1610         @echo "TEXT_BASE := 0xFE360000" \
1611                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1612         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1613
1614 xilinx-ppc405-generic_config: unconfig
1615         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1616         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1617                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1618         @echo "TEXT_BASE := 0x04000000" \
1619                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1620         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1621
1622 xilinx-ppc440-generic_flash_config: unconfig
1623         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1624         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1625                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1626         @echo "TEXT_BASE := 0xFE360000" \
1627                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1628         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1629
1630 xilinx-ppc440-generic_config: unconfig
1631         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1632         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1633                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1634         @echo "TEXT_BASE := 0x04000000" \
1635                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1636         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1637
1638 XPEDITE1000_config:     unconfig
1639         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1640
1641 yosemite_config \
1642 yellowstone_config: unconfig
1643         @mkdir -p $(obj)include
1644         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1645                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1646         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1647
1648 yucca_config:   unconfig
1649         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1650
1651 zeus_config:    unconfig
1652         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1653
1654 #########################################################################
1655 ## MPC8220 Systems
1656 #########################################################################
1657
1658 Alaska8220_config       \
1659 Yukon8220_config:       unconfig
1660         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1661
1662 sorcery_config:         unconfig
1663         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1664
1665 #########################################################################
1666 ## MPC824x Systems
1667 #########################################################################
1668 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1669
1670 A3000_config: unconfig
1671         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1672
1673 barco_config: unconfig
1674         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1675
1676 BMW_config: unconfig
1677         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1678
1679 CPC45_config    \
1680 CPC45_ROMBOOT_config:   unconfig
1681         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1682         @cd $(obj)include ;                             \
1683         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1684                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1685                 $(XECHO) "... booting from 8-bit flash" ; \
1686         else \
1687                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1688                 $(XECHO) "... booting from 64-bit flash" ; \
1689         fi; \
1690         echo "export CONFIG_BOOT_ROM" >> config.mk;
1691
1692 CU824_config: unconfig
1693         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1694
1695 debris_config: unconfig
1696         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1697
1698 eXalion_config: unconfig
1699         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1700
1701 HIDDEN_DRAGON_config: unconfig
1702         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1703
1704 kvme080_config: unconfig
1705         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1706
1707 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1708 # time permits.
1709 #linkstation_HDLAN_config \
1710 # Remove this line when HDLAN is fixed
1711 linkstation_HGLAN_config: unconfig
1712         @mkdir -p $(obj)include
1713         @case $@ in \
1714                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1715                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1716         esac
1717         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1718
1719 MOUSSE_config: unconfig
1720         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1721
1722 MUSENKI_config: unconfig
1723         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1724
1725 MVBLUE_config:  unconfig
1726         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1727
1728 OXC_config: unconfig
1729         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1730
1731 PN62_config: unconfig
1732         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1733
1734 Sandpoint8240_config: unconfig
1735         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1736
1737 Sandpoint8245_config: unconfig
1738         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1739
1740 sbc8240_config: unconfig
1741         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1742
1743 SL8245_config: unconfig
1744         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1745
1746 utx8245_config: unconfig
1747         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1748
1749 #########################################################################
1750 ## MPC8260 Systems
1751 #########################################################################
1752
1753 atc_config:     unconfig
1754         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1755
1756 cogent_mpc8260_config:  unconfig
1757         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1758
1759 CPU86_config    \
1760 CPU86_ROMBOOT_config: unconfig
1761         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1762         @cd $(obj)include ;                             \
1763         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1764                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1765                 $(XECHO) "... booting from 8-bit flash" ; \
1766         else \
1767                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1768                 $(XECHO) "... booting from 64-bit flash" ; \
1769         fi; \
1770         echo "export CONFIG_BOOT_ROM" >> config.mk;
1771
1772 CPU87_config    \
1773 CPU87_ROMBOOT_config: unconfig
1774         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1775         @cd $(obj)include ;                             \
1776         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1777                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1778                 $(XECHO) "... booting from 8-bit flash" ; \
1779         else \
1780                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1781                 $(XECHO) "... booting from 64-bit flash" ; \
1782         fi; \
1783         echo "export CONFIG_BOOT_ROM" >> config.mk;
1784
1785 ep8248_config   \
1786 ep8248E_config  :       unconfig
1787         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1788
1789 ep8260_config:  unconfig
1790         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1791
1792 ep82xxm_config: unconfig
1793         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1794
1795 gw8260_config:  unconfig
1796         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1797
1798 hymod_config:   unconfig
1799         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1800
1801 IDS8247_config: unconfig
1802         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1803
1804 IPHASE4539_config:      unconfig
1805         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1806
1807 ISPAN_config            \
1808 ISPAN_REVB_config:      unconfig
1809         @mkdir -p $(obj)include
1810         @if [ "$(findstring _REVB_,$@)" ] ; then \
1811                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1812         fi
1813         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1814
1815 mgcoge_config   :       unconfig
1816         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1817
1818 MPC8260ADS_config       \
1819 MPC8260ADS_lowboot_config       \
1820 MPC8260ADS_33MHz_config \
1821 MPC8260ADS_33MHz_lowboot_config \
1822 MPC8260ADS_40MHz_config \
1823 MPC8260ADS_40MHz_lowboot_config \
1824 MPC8272ADS_config       \
1825 MPC8272ADS_lowboot_config       \
1826 PQ2FADS_config          \
1827 PQ2FADS_lowboot_config          \
1828 PQ2FADS-VR_config       \
1829 PQ2FADS-VR_lowboot_config       \
1830 PQ2FADS-ZU_config       \
1831 PQ2FADS-ZU_lowboot_config       \
1832 PQ2FADS-ZU_66MHz_config \
1833 PQ2FADS-ZU_66MHz_lowboot_config \
1834         :               unconfig
1835         @mkdir -p $(obj)include
1836         @mkdir -p $(obj)board/freescale/mpc8260ads
1837         $(if $(findstring PQ2FADS,$@), \
1838         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1839         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1840         $(if $(findstring MHz,$@), \
1841         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1842         $(if $(findstring VR,$@), \
1843         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1844         @[ -z "$(findstring lowboot_,$@)" ] || \
1845                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1846                   $(XECHO) "... with lowboot configuration" ; \
1847                 }
1848         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1849
1850 MPC8266ADS_config:      unconfig
1851         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1852
1853 muas3001_dev_config \
1854 muas3001_config :       unconfig
1855         @mkdir -p $(obj)include
1856         @mkdir -p $(obj)board/muas3001
1857         @if [ "$(findstring dev,$@)" ] ; then \
1858                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1859         fi
1860         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1861
1862 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1863 PM825_config    \
1864 PM825_ROMBOOT_config    \
1865 PM825_BIGFLASH_config   \
1866 PM825_ROMBOOT_BIGFLASH_config   \
1867 PM826_config    \
1868 PM826_ROMBOOT_config    \
1869 PM826_BIGFLASH_config   \
1870 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1871         @mkdir -p $(obj)include
1872         @mkdir -p $(obj)board/pm826
1873         @if [ "$(findstring PM825_,$@)" ] ; then \
1874                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1875         else \
1876                 >$(obj)include/config.h ; \
1877         fi
1878         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1879                 $(XECHO) "... booting from 8-bit flash" ; \
1880                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1881                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1882                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1883                         $(XECHO) "... with 32 MB Flash" ; \
1884                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1885                 fi; \
1886         else \
1887                 $(XECHO) "... booting from 64-bit flash" ; \
1888                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1889                         $(XECHO) "... with 32 MB Flash" ; \
1890                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1891                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1892                 else \
1893                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1894                 fi; \
1895         fi
1896         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1897
1898 PM828_config    \
1899 PM828_PCI_config        \
1900 PM828_ROMBOOT_config    \
1901 PM828_ROMBOOT_PCI_config:       unconfig
1902         @mkdir -p $(obj)include
1903         @mkdir -p $(obj)board/pm826
1904         @if [ "$(findstring _PCI_,$@)" ] ; then \
1905                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1906                 $(XECHO) "... with PCI enabled" ; \
1907         fi
1908         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1909                 $(XECHO) "... booting from 8-bit flash" ; \
1910                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1911                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1912         fi
1913         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1914
1915 ppmc8260_config:        unconfig
1916         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1917
1918 Rattler8248_config      \
1919 Rattler_config:         unconfig
1920         @mkdir -p $(obj)include
1921         $(if $(findstring 8248,$@), \
1922         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1923         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1924
1925 RPXsuper_config:        unconfig
1926         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1927
1928 rsdproto_config:        unconfig
1929         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1930
1931 sacsng_config:  unconfig
1932         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1933
1934 sbc8260_config: unconfig
1935         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1936
1937 SCM_config:             unconfig
1938         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1939
1940 TQM8255_AA_config \
1941 TQM8260_AA_config \
1942 TQM8260_AB_config \
1943 TQM8260_AC_config \
1944 TQM8260_AD_config \
1945 TQM8260_AE_config \
1946 TQM8260_AF_config \
1947 TQM8260_AG_config \
1948 TQM8260_AH_config \
1949 TQM8260_AI_config \
1950 TQM8265_AA_config:  unconfig
1951         @mkdir -p $(obj)include
1952         @case "$@" in \
1953         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1954         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1955         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1956         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1957         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1958         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1959         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1960         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1961         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1962         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1963         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1964         esac; \
1965         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1966                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1967         fi; \
1968         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1969         echo "... with $${CFREQ}MHz system clock" ; \
1970         if [ "$${CACHE}" = "yes" ] ; then \
1971                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1972                 $(XECHO) "... with L2 Cache support" ; \
1973         else \
1974                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1975                 $(XECHO) "... without L2 Cache support" ; \
1976         fi; \
1977         if [ "$${BMODE}" = "60x" ] ; then \
1978                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1979                 $(XECHO) "... with 60x Bus Mode" ; \
1980         else \
1981                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
1982                 $(XECHO) "... without 60x Bus Mode" ; \
1983         fi
1984         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
1985
1986 TQM8272_config: unconfig
1987         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
1988
1989 VoVPN-GW_66MHz_config   \
1990 VoVPN-GW_100MHz_config:         unconfig
1991         @mkdir -p $(obj)include
1992         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
1993         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
1994
1995 ZPC1900_config: unconfig
1996         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
1997
1998 #########################################################################
1999 ## Coldfire
2000 #########################################################################
2001
2002 M5208EVBE_config :              unconfig
2003         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
2004
2005 M52277EVB_config \
2006 M52277EVB_spansion_config \
2007 M52277EVB_stmicro_config :      unconfig
2008         @case "$@" in \
2009         M52277EVB_config)               FLASH=SPANSION;; \
2010         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2011         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2012         esac; \
2013         if [ "$${FLASH}" = "SPANSION" ] ; then \
2014                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2015                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2016                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2017                 $(XECHO) "... with SPANSION boot..." ; \
2018         fi; \
2019         if [ "$${FLASH}" = "STMICRO" ] ; then \
2020                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2021                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2022                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2023                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2024                 $(XECHO) "... with ST Micro boot..." ; \
2025         fi
2026         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2027
2028 M5235EVB_config \
2029 M5235EVB_Flash16_config \
2030 M5235EVB_Flash32_config:        unconfig
2031         @case "$@" in \
2032         M5235EVB_config)                FLASH=16;; \
2033         M5235EVB_Flash16_config)        FLASH=16;; \
2034         M5235EVB_Flash32_config)        FLASH=32;; \
2035         esac; \
2036         if [ "$${FLASH}" != "16" ] ; then \
2037                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2038                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2039                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2040         else \
2041                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2042                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2043         fi
2044         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2045
2046 M5249EVB_config :               unconfig
2047         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2048
2049 M5253DEMO_config :              unconfig
2050         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2051
2052 M5253EVBE_config :              unconfig
2053         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2054
2055 cobra5272_config :              unconfig
2056         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2057
2058 EB+MCF-EV123_config :           unconfig
2059         @mkdir -p $(obj)include
2060         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2061         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2062         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2063
2064 EB+MCF-EV123_internal_config :  unconfig
2065         @mkdir -p $(obj)include
2066         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2067         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2068         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2069
2070 idmr_config :                   unconfig
2071         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2072
2073 M5271EVB_config :               unconfig
2074         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2075
2076 M5272C3_config :                unconfig
2077         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2078
2079 M5275EVB_config :               unconfig
2080         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2081
2082 M5282EVB_config :               unconfig
2083         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2084
2085 M53017EVB_config :              unconfig
2086         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2087
2088 M5329AFEE_config \
2089 M5329BFEE_config :      unconfig
2090         @case "$@" in \
2091         M5329AFEE_config)       NAND=0;; \
2092         M5329BFEE_config)       NAND=16;; \
2093         esac; \
2094         if [ "$${NAND}" != "0" ] ; then \
2095                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2096         fi
2097         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2098
2099 M5373EVB_config :       unconfig
2100         @case "$@" in \
2101         M5373EVB_config)        NAND=16;; \
2102         esac; \
2103         if [ "$${NAND}" != "0" ] ; then \
2104                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2105         fi
2106         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2107
2108 M54451EVB_config \
2109 M54451EVB_stmicro_config :      unconfig
2110         @case "$@" in \
2111         M54451EVB_config)               FLASH=NOR;; \
2112         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2113         esac; \
2114         if [ "$${FLASH}" = "NOR" ] ; then \
2115                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2116                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2117                 $(XECHO) "... with NOR boot..." ; \
2118         fi; \
2119         if [ "$${FLASH}" = "STMICRO" ] ; then \
2120                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2121                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2122                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2123                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2124                 $(XECHO) "... with ST Micro boot..." ; \
2125         fi; \
2126         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2127         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2128
2129 M54455EVB_config \
2130 M54455EVB_atmel_config \
2131 M54455EVB_intel_config \
2132 M54455EVB_a33_config \
2133 M54455EVB_a66_config \
2134 M54455EVB_i33_config \
2135 M54455EVB_i66_config \
2136 M54455EVB_stm33_config :        unconfig
2137         @case "$@" in \
2138         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2139         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2140         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2141         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2142         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2143         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2144         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2145         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2146         esac; \
2147         if [ "$${FLASH}" = "INTEL" ] ; then \
2148                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2149                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2150                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2151                 $(XECHO) "... with INTEL boot..." ; \
2152         fi; \
2153         if [ "$${FLASH}" = "ATMEL" ] ; then \
2154                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2155                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2156                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2157                 $(XECHO) "... with ATMEL boot..." ; \
2158         fi; \
2159         if [ "$${FLASH}" = "STMICRO" ] ; then \
2160                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2161                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2162                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2163                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2164                 $(XECHO) "... with ST Micro boot..." ; \
2165         fi; \
2166         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2167         $(XECHO) "... with $${FREQ}Hz input clock"
2168         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2169
2170 M5475AFE_config \
2171 M5475BFE_config \
2172 M5475CFE_config \
2173 M5475DFE_config \
2174 M5475EFE_config \
2175 M5475FFE_config \
2176 M5475GFE_config :       unconfig
2177         @case "$@" in \
2178         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2179         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2180         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2181         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2182         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2183         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2184         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2185         esac; \
2186         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2187         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2188         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2189         if [ "$${RAM1}" != "0" ] ; then \
2190                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2191         fi; \
2192         if [ "$${CODE}" != "0" ] ; then \
2193                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2194         fi; \
2195         if [ "$${VID}" == "1" ] ; then \
2196                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2197         fi; \
2198         if [ "$${USB}" == "1" ] ; then \
2199                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2200         fi
2201         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2202
2203 M5485AFE_config \
2204 M5485BFE_config \
2205 M5485CFE_config \
2206 M5485DFE_config \
2207 M5485EFE_config \
2208 M5485FFE_config \
2209 M5485GFE_config \
2210 M5485HFE_config :       unconfig
2211         @case "$@" in \
2212         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2213         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2214         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2215         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2216         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2217         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2218         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2219         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2220         esac; \
2221         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2222         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2223         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2224         if [ "$${RAM1}" != "0" ] ; then \
2225                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2226         fi; \
2227         if [ "$${CODE}" != "0" ] ; then \
2228                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2229         fi; \
2230         if [ "$${VID}" == "1" ] ; then \
2231                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2232         fi; \
2233         if [ "$${USB}" == "1" ] ; then \
2234                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2235         fi
2236         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2237
2238 TASREG_config :         unconfig
2239         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2240
2241 #########################################################################
2242 ## MPC83xx Systems
2243 #########################################################################
2244
2245 kmeter1_config: unconfig
2246         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2247
2248 MPC8313ERDB_33_config \
2249 MPC8313ERDB_66_config \
2250 MPC8313ERDB_NAND_33_config \
2251 MPC8313ERDB_NAND_66_config: unconfig
2252         @mkdir -p $(obj)include
2253         @mkdir -p $(obj)board/freescale/mpc8313erdb
2254         @if [ "$(findstring _33_,$@)" ] ; then \
2255                 $(XECHO) -n "...33M ..." ; \
2256                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2257         fi ; \
2258         if [ "$(findstring _66_,$@)" ] ; then \
2259                 $(XECHO) -n "...66M..." ; \
2260                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2261         fi ; \
2262         if [ "$(findstring _NAND_,$@)" ] ; then \
2263                 $(XECHO) -n "...NAND..." ; \
2264                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2265                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2266         fi ;
2267         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2268         @if [ "$(findstring _NAND_,$@)" ] ; then \
2269                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2270         fi ;
2271
2272 MPC8315ERDB_NAND_config \
2273 MPC8315ERDB_config: unconfig
2274         @if [ "$(findstring _NAND_,$@)" ] ; then \
2275                 ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
2276         fi ;
2277         @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2278
2279 MPC8323ERDB_config:     unconfig
2280         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2281
2282 MPC832XEMDS_config \
2283 MPC832XEMDS_HOST_33_config \
2284 MPC832XEMDS_HOST_66_config \
2285 MPC832XEMDS_SLAVE_config \
2286 MPC832XEMDS_ATM_config: unconfig
2287         @mkdir -p $(obj)include
2288         @if [ "$(findstring _HOST_,$@)" ] ; then \
2289                 $(XECHO) -n "... PCI HOST " ; \
2290                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2291         fi ; \
2292         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2293                 $(XECHO) "...PCI SLAVE 66M"  ; \
2294                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2295                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2296         fi ; \
2297         if [ "$(findstring _33_,$@)" ] ; then \
2298                 $(XECHO) -n "...33M ..." ; \
2299                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2300                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2301         fi ; \
2302         if [ "$(findstring _66_,$@)" ] ; then \
2303                 $(XECHO) -n "...66M..." ; \
2304                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2305                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2306         fi ; \
2307         if [ "$(findstring _ATM_,$@)" ] ; then \
2308                 $(XECHO) -n "...ATM..." ; \
2309                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2310                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2311         fi ;
2312         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2313
2314 MPC8349EMDS_config:     unconfig
2315         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2316
2317 MPC8349ITX_config \
2318 MPC8349ITX_LOWBOOT_config \
2319 MPC8349ITXGP_config:    unconfig
2320         @mkdir -p $(obj)include
2321         @mkdir -p $(obj)board/freescale/mpc8349itx
2322         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2323         @if [ "$(findstring GP,$@)" ] ; then \
2324                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2325         fi
2326         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2327                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2328         fi
2329         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2330
2331 MPC8360EMDS_config \
2332 MPC8360EMDS_HOST_33_config \
2333 MPC8360EMDS_HOST_66_config \
2334 MPC8360EMDS_SLAVE_config \
2335 MPC8360EMDS_ATM_config: unconfig
2336         @mkdir -p $(obj)include
2337         @if [ "$(findstring _HOST_,$@)" ] ; then \
2338                 $(XECHO) -n "... PCI HOST " ; \
2339                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2340         fi ; \
2341         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2342                 $(XECHO) "...PCI SLAVE 66M"  ; \
2343                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2344                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2345         fi ; \
2346         if [ "$(findstring _33_,$@)" ] ; then \
2347                 $(XECHO) -n "...33M ..." ; \
2348                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2349                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2350         fi ; \
2351         if [ "$(findstring _66_,$@)" ] ; then \
2352                 $(XECHO) -n "...66M..." ; \
2353                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2354                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2355         fi ; \
2356         if [ "$(findstring _ATM_,$@)" ] ; then \
2357                 $(XECHO) -n "...ATM..." ; \
2358                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2359                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2360         fi ;
2361         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2362
2363 MPC8360ERDK_33_config \
2364 MPC8360ERDK_66_config \
2365 MPC8360ERDK_config:     unconfig
2366         @mkdir -p $(obj)include
2367         @if [ "$(findstring _33_,$@)" ] ; then \
2368                 $(XECHO) -n "... CLKIN 33MHz " ; \
2369                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2370         fi ;
2371         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2372
2373 MPC837XEMDS_config \
2374 MPC837XEMDS_HOST_config:        unconfig
2375         @mkdir -p $(obj)include
2376         @if [ "$(findstring _HOST_,$@)" ] ; then \
2377                 $(XECHO) -n "... PCI HOST " ; \
2378                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2379         fi ;
2380         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2381
2382 MPC837XERDB_config:     unconfig
2383         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2384
2385 MVBLM7_config: unconfig
2386         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2387
2388 sbc8349_config \
2389 sbc8349_PCI_33_config \
2390 sbc8349_PCI_66_config: unconfig
2391         @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
2392
2393 SIMPC8313_LP_config \
2394 SIMPC8313_SP_config: unconfig
2395         @mkdir -p $(obj)include
2396         @mkdir -p $(obj)board/sheldon/simpc8313
2397         @if [ "$(findstring _LP_,$@)" ] ; then \
2398                 $(XECHO) -n "...Large Page NAND..." ; \
2399                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2400         fi ; \
2401         if [ "$(findstring _SP_,$@)" ] ; then \
2402                 $(XECHO) -n "...Small Page NAND..." ; \
2403                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2404         fi ;
2405         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2406         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2407
2408 TQM834x_config: unconfig
2409         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2410
2411 caddy2_config \
2412 vme8349_config:         unconfig
2413         @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
2414
2415 #########################################################################
2416 ## MPC85xx Systems
2417 #########################################################################
2418
2419 ATUM8548_config:        unconfig
2420         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2421
2422 MPC8536DS_NAND_config \
2423 MPC8536DS_SDCARD_config \
2424 MPC8536DS_SPIFLASH_config \
2425 MPC8536DS_36BIT_config \
2426 MPC8536DS_config:       unconfig
2427         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2428
2429 MPC8540ADS_config:      unconfig
2430         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2431
2432 MPC8540EVAL_config \
2433 MPC8540EVAL_33_config \
2434 MPC8540EVAL_66_config \
2435 MPC8540EVAL_33_slave_config \
2436 MPC8540EVAL_66_slave_config:      unconfig
2437         @mkdir -p $(obj)include
2438         @if [ "$(findstring _33_,$@)" ] ; then \
2439                 $(XECHO) "... 33 MHz PCI" ; \
2440         else \
2441                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2442                 $(XECHO) "... 66 MHz PCI" ; \
2443         fi ; \
2444         if [ "$(findstring _slave_,$@)" ] ; then \
2445                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2446                 $(XECHO) " slave" ; \
2447         else \
2448                 $(XECHO) " host" ; \
2449         fi
2450         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2451
2452 MPC8560ADS_config:      unconfig
2453         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2454
2455 MPC8541CDS_legacy_config \
2456 MPC8541CDS_config:      unconfig
2457         @mkdir -p $(obj)include
2458         @if [ "$(findstring _legacy_,$@)" ] ; then \
2459                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2460                 $(XECHO) "... legacy" ; \
2461         fi
2462         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2463
2464 MPC8544DS_config:       unconfig
2465         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2466
2467 MPC8548CDS_legacy_config \
2468 MPC8548CDS_config:      unconfig
2469         @mkdir -p $(obj)include
2470         @if [ "$(findstring _legacy_,$@)" ] ; then \
2471                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2472                 $(XECHO) "... legacy" ; \
2473         fi
2474         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2475
2476 MPC8555CDS_legacy_config \
2477 MPC8555CDS_config:      unconfig
2478         @mkdir -p $(obj)include
2479         @if [ "$(findstring _legacy_,$@)" ] ; then \
2480                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2481                 $(XECHO) "... legacy" ; \
2482         fi
2483         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2484
2485 MPC8568MDS_config:      unconfig
2486         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2487
2488 MPC8569MDS_config:      unconfig
2489         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2490
2491 MPC8572DS_36BIT_config \
2492 MPC8572DS_config:       unconfig
2493         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2494
2495 P2020DS_36BIT_config \
2496 P2020DS_config:         unconfig
2497         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2498
2499 P1011RDB_config \
2500 P1011RDB_NAND_config \
2501 P1011RDB_SDCARD_config \
2502 P1011RDB_SPIFLASH_config \
2503 P1020RDB_config \
2504 P1020RDB_NAND_config \
2505 P1020RDB_SDCARD_config \
2506 P1020RDB_SPIFLASH_config \
2507 P2010RDB_config \
2508 P2010RDB_NAND_config \
2509 P2010RDB_SDCARD_config \
2510 P2010RDB_SPIFLASH_config \
2511 P2020RDB_config \
2512 P2020RDB_NAND_config \
2513 P2020RDB_SDCARD_config \
2514 P2020RDB_SPIFLASH_config:       unconfig
2515         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2516
2517 PM854_config:   unconfig
2518         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2519
2520 PM856_config:   unconfig
2521         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2522
2523 sbc8540_config \
2524 sbc8540_33_config \
2525 sbc8540_66_config:      unconfig
2526         @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
2527
2528 sbc8548_config \
2529 sbc8548_PCI_33_config \
2530 sbc8548_PCI_66_config \
2531 sbc8548_PCI_33_PCIE_config \
2532 sbc8548_PCI_66_PCIE_config: unconfig
2533         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2534
2535 sbc8560_config \
2536 sbc8560_33_config \
2537 sbc8560_66_config:      unconfig
2538         @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
2539
2540 socrates_config:        unconfig
2541         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2542
2543 stxgp3_config:          unconfig
2544         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2545
2546 stxssa_config           \
2547 stxssa_4M_config:       unconfig
2548         @mkdir -p $(obj)include
2549         @if [ "$(findstring _4M_,$@)" ] ; then \
2550                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2551                 $(XECHO) "... with 4 MiB flash memory" ; \
2552         fi
2553         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2554
2555 TQM8540_config          \
2556 TQM8541_config          \
2557 TQM8548_config          \
2558 TQM8548_AG_config       \
2559 TQM8548_BE_config       \
2560 TQM8555_config          \
2561 TQM8560_config:         unconfig
2562         @mkdir -p $(obj)include
2563         @BTYPE=$(@:_config=); \
2564         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2565         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2566         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2567         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2568         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2569         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2570         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2571         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2572
2573 XPEDITE5200_config:     unconfig
2574         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2575
2576 XPEDITE5370_config:     unconfig
2577         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2578
2579 #########################################################################
2580 ## MPC86xx Systems
2581 #########################################################################
2582
2583 MPC8610HPCD_config:     unconfig
2584         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2585
2586 MPC8641HPCN_36BIT_config \
2587 MPC8641HPCN_config:    unconfig
2588         @mkdir -p $(obj)include
2589         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2590                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2591                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2592         fi
2593         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2594
2595 sbc8641d_config:        unconfig
2596         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2597
2598 XPEDITE5170_config:     unconfig
2599         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2600
2601 #########################################################################
2602 ## 74xx/7xx Systems
2603 #########################################################################
2604
2605 AmigaOneG3SE_config:    unconfig
2606         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2607
2608 BAB7xx_config: unconfig
2609         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2610
2611 CPCI750_config: unconfig
2612         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2613
2614 DB64360_config: unconfig
2615         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2616
2617 DB64460_config: unconfig
2618         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2619
2620 ELPPC_config: unconfig
2621         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2622
2623 EVB64260_config \
2624 EVB64260_750CX_config:  unconfig
2625         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2626
2627 mpc7448hpc2_config:  unconfig
2628         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2629
2630 P3G4_config: unconfig
2631         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2632
2633 p3m750_config   \
2634 p3m7448_config:         unconfig
2635         @mkdir -p $(obj)include
2636         @if [ "$(findstring 750_,$@)" ] ; then \
2637                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2638         else \
2639                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2640         fi
2641         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2642
2643 PCIPPC2_config \
2644 PCIPPC6_config: unconfig
2645         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2646
2647 ppmc7xx_config: unconfig
2648         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2649
2650 ZUMA_config:    unconfig
2651         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2652
2653 #========================================================================
2654 # ARM
2655 #========================================================================
2656 #########################################################################
2657 ## StrongARM Systems
2658 #########################################################################
2659
2660 assabet_config  :       unconfig
2661         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2662
2663 dnp1110_config  :       unconfig
2664         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2665
2666 gcplus_config   :       unconfig
2667         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2668
2669 lart_config     :       unconfig
2670         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2671
2672 shannon_config  :       unconfig
2673         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2674
2675 #########################################################################
2676 ## ARM92xT Systems
2677 #########################################################################
2678
2679 a320evb_config  :       unconfig
2680         @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
2681
2682 #########################################################################
2683 ## Atmel AT91RM9200 Systems
2684 #########################################################################
2685
2686 at91rm9200dk_config     :       unconfig
2687         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2688
2689 at91rm9200ek_config     :       unconfig
2690         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2691
2692 cmc_pu2_config  :       unconfig
2693         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2694
2695 CPUAT91_RAM_config \
2696 CPUAT91_config  :       unconfig
2697         @mkdir -p $(obj)include
2698         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2699         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2700
2701 csb637_config   :       unconfig
2702         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2703
2704 kb9202_config   :       unconfig
2705         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2706
2707 m501sk_config   :       unconfig
2708         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2709
2710 mp2usb_config   :       unconfig
2711         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2712
2713 #########################################################################
2714 ## ARM926EJ-S Systems
2715 #########################################################################
2716
2717 afeb9260_config:        unconfig
2718         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2719
2720 at91cap9adk_config      :       unconfig
2721         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2722
2723 at91sam9260ek_nandflash_config \
2724 at91sam9260ek_dataflash_cs0_config \
2725 at91sam9260ek_dataflash_cs1_config \
2726 at91sam9260ek_config \
2727 at91sam9g20ek_nandflash_config \
2728 at91sam9g20ek_dataflash_cs0_config \
2729 at91sam9g20ek_dataflash_cs1_config \
2730 at91sam9g20ek_config    :       unconfig
2731         @mkdir -p $(obj)include
2732         @if [ "$(findstring 9g20,$@)" ] ; then \
2733                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2734                 $(XECHO) "... 9G20 Variant" ; \
2735         else \
2736                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2737         fi;
2738         @if [ "$(findstring _nandflash,$@)" ] ; then \
2739                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2740                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2741         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2742                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2743                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2744         else \
2745                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2746                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2747         fi;
2748         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2749
2750 at91sam9xeek_nandflash_config \
2751 at91sam9xeek_dataflash_cs0_config \
2752 at91sam9xeek_dataflash_cs1_config \
2753 at91sam9xeek_config     :       unconfig
2754         @mkdir -p $(obj)include
2755         @if [ "$(findstring _nandflash,$@)" ] ; then \
2756                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2757                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2758         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2759                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2760                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2761         else \
2762                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2763                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2764         fi;
2765         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2766
2767 at91sam9261ek_nandflash_config \
2768 at91sam9261ek_dataflash_cs0_config \
2769 at91sam9261ek_dataflash_cs3_config \
2770 at91sam9261ek_config \
2771 at91sam9g10ek_nandflash_config \
2772 at91sam9g10ek_dataflash_cs0_config \
2773 at91sam9g10ek_dataflash_cs3_config \
2774 at91sam9g10ek_config    :       unconfig
2775         @mkdir -p $(obj)include
2776         @if [ "$(findstring 9g10,$@)" ] ; then \
2777                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2778                 $(XECHO) "... 9G10 Variant" ; \
2779         else \
2780                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2781         fi;
2782         @if [ "$(findstring _nandflash,$@)" ] ; then \
2783                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2784                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2785         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2786                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2787                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2788         else \
2789                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2790                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2791         fi;
2792         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2793
2794 at91sam9263ek_norflash_config \
2795 at91sam9263ek_norflash_boot_config \
2796 at91sam9263ek_nandflash_config \
2797 at91sam9263ek_dataflash_config \
2798 at91sam9263ek_dataflash_cs0_config \
2799 at91sam9263ek_config    :       unconfig
2800         @mkdir -p $(obj)include
2801         @if [ "$(findstring _nandflash,$@)" ] ; then \
2802                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2803                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2804         elif [ "$(findstring norflash,$@)" ] ; then \
2805                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2806                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2807         else \
2808                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2809                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2810         fi;
2811         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2812                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2813                 $(XECHO) "... and boot from NOR FLASH" ; \
2814         fi;
2815         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2816
2817 at91sam9rlek_nandflash_config \
2818 at91sam9rlek_dataflash_config \
2819 at91sam9rlek_dataflash_cs0_config \
2820 at91sam9rlek_config     :       unconfig
2821         @mkdir -p $(obj)include
2822         @if [ "$(findstring _nandflash,$@)" ] ; then \
2823                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2824                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2825         else \
2826                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2827                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2828         fi;
2829         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2830
2831 CPU9G20_128M_config \
2832 CPU9G20_config \
2833 CPU9260_128M_config \
2834 CPU9260_config  :       unconfig
2835         @mkdir -p $(obj)include
2836         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2837         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2838
2839 meesc_config    :       unconfig
2840         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2841
2842 pm9261_config   :       unconfig
2843         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2844
2845 at91sam9m10g45ek_nandflash_config \
2846 at91sam9m10g45ek_dataflash_config \
2847 at91sam9m10g45ek_dataflash_cs0_config \
2848 at91sam9m10g45ek_config \
2849 at91sam9g45ekes_nandflash_config \
2850 at91sam9g45ekes_dataflash_config \
2851 at91sam9g45ekes_dataflash_cs0_config \
2852 at91sam9g45ekes_config  :       unconfig
2853         @mkdir -p $(obj)include
2854                 @if [ "$(findstring 9m10,$@)" ] ; then \
2855                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2856                 $(XECHO) "... 9M10G45 Variant" ; \
2857         else \
2858                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2859         fi;
2860
2861         @if [ "$(findstring _nandflash,$@)" ] ; then \
2862                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2863                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2864         else \
2865                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2866                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2867         fi;
2868         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2869
2870 pm9263_config   :       unconfig
2871         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2872
2873 SBC35_A9G20_NANDFLASH_config \
2874 SBC35_A9G20_EEPROM_config \
2875 SBC35_A9G20_config      :       unconfig
2876         @mkdir -p $(obj)include
2877         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2878         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2879
2880 TNY_A9G20_NANDFLASH_config \
2881 TNY_A9G20_EEPROM_config \
2882 TNY_A9G20_config \
2883 TNY_A9260_NANDFLASH_config \
2884 TNY_A9260_EEPROM_config \
2885 TNY_A9260_config        :       unconfig
2886         @mkdir -p $(obj)include
2887         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2888         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2889
2890 ########################################################################
2891 ## ARM Integrator boards - see doc/README-integrator for more info.
2892 integratorap_config     \
2893 ap_config               \
2894 ap966_config            \
2895 ap922_config            \
2896 ap922_XA10_config       \
2897 ap7_config              \
2898 ap720t_config           \
2899 ap920t_config           \
2900 ap926ejs_config         \
2901 ap946es_config: unconfig
2902         @board/armltd/integrator/split_by_variant.sh ap $@
2903
2904 integratorcp_config     \
2905 cp_config               \
2906 cp920t_config           \
2907 cp926ejs_config         \
2908 cp946es_config          \
2909 cp1136_config           \
2910 cp966_config            \
2911 cp922_config            \
2912 cp922_XA10_config       \
2913 cp1026_config: unconfig
2914         @board/armltd/integrator/split_by_variant.sh cp $@
2915
2916 da830evm_config:        unconfig
2917         @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
2918
2919 davinci_dvevm_config :  unconfig
2920         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2921
2922 davinci_schmoogie_config :      unconfig
2923         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2924
2925 davinci_sffsdr_config : unconfig
2926         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2927
2928 davinci_sonata_config : unconfig
2929         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2930
2931 davinci_dm355evm_config :       unconfig
2932         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2933
2934 davinci_dm355leopard_config :   unconfig
2935         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2936
2937 davinci_dm365evm_config :       unconfig
2938         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2939
2940 davinci_dm6467evm_config :      unconfig
2941         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2942
2943 imx27lite_config:       unconfig
2944         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2945
2946 lpd7a400_config \
2947 lpd7a404_config:        unconfig
2948         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2949
2950 mv88f6281gtw_ge_config: unconfig
2951         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2952
2953 mx1ads_config   :       unconfig
2954         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2955
2956 mx1fs2_config   :       unconfig
2957         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2958
2959 netstar_config:         unconfig
2960         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2961
2962 nhk8815_config \
2963 nhk8815_onenand_config: unconfig
2964         @mkdir -p $(obj)include
2965         @ > $(obj)include/config.h
2966         @if [ "$(findstring _onenand, $@)" ] ; then \
2967                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2968                 $(XECHO) "... configured to boot from OneNand Flash"; \
2969         else \
2970                 $(XECHO) "... configured to boot from Nand Flash"; \
2971         fi
2972         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2973
2974 omap1510inn_config :    unconfig
2975         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2976
2977 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2978
2979 omap1610inn_config \
2980 omap1610inn_cs0boot_config \
2981 omap1610inn_cs3boot_config \
2982 omap1610inn_cs_autoboot_config \
2983 omap1610h2_config \
2984 omap1610h2_cs0boot_config \
2985 omap1610h2_cs3boot_config \
2986 omap1610h2_cs_autoboot_config:  unconfig
2987         @mkdir -p $(obj)include
2988         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
2989                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
2990                 $(XECHO) "... configured for CS0 boot"; \
2991         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
2992                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
2993                 $(XECHO) "... configured for CS_AUTO boot"; \
2994         else \
2995                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
2996                 $(XECHO) "... configured for CS3 boot"; \
2997         fi;
2998         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
2999
3000 omap5912osk_config :    unconfig
3001         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
3002
3003 openrd_base_config: unconfig
3004         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3005
3006 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3007
3008 omap730p2_config \
3009 omap730p2_cs0boot_config \
3010 omap730p2_cs3boot_config :      unconfig
3011         @mkdir -p $(obj)include
3012         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3013                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3014                 $(XECHO) "... configured for CS0 boot"; \
3015         else \
3016                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3017                 $(XECHO) "... configured for CS3 boot"; \
3018         fi;
3019         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3020
3021 rd6281a_config: unconfig
3022         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3023
3024 sbc2410x_config: unconfig
3025         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3026
3027 scb9328_config  :       unconfig
3028         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3029
3030 sheevaplug_config: unconfig
3031         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3032
3033 smdk2400_config :       unconfig
3034         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3035
3036 smdk2410_config :       unconfig
3037         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3038
3039 spear300_config \
3040 spear310_config :       unconfig
3041         @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear
3042
3043 spear600_config :       unconfig
3044         @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear
3045
3046 SX1_stdout_serial_config \
3047 SX1_config:             unconfig
3048         @mkdir -p $(obj)include
3049         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3050                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3051                 $(XECHO) "... configured for stdout serial"; \
3052         else \
3053                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3054                 $(XECHO) "... configured for stdout usbtty"; \
3055         fi;
3056         @$(MKCONFIG) SX1 arm arm925t sx1
3057
3058 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3059 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3060
3061 trab_config \
3062 trab_bigram_config \
3063 trab_bigflash_config \
3064 trab_old_config:        unconfig
3065         @mkdir -p $(obj)include
3066         @mkdir -p $(obj)board/trab
3067         @[ -z "$(findstring _bigram,$@)" ] || \
3068                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3069                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3070                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3071                 }
3072         @[ -z "$(findstring _bigflash,$@)" ] || \
3073                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3074                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3075                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3076                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3077                 }
3078         @[ -z "$(findstring _old,$@)" ] || \
3079                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3080                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3081                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3082                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3083                 }
3084         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3085
3086 VCMA9_config    :       unconfig
3087         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3088
3089 #########################################################################
3090 # ARM supplied Versatile development boards
3091 #########################################################################
3092
3093 cm4008_config   :       unconfig
3094         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3095
3096 cm41xx_config   :       unconfig
3097         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3098
3099 versatile_config        \
3100 versatileab_config      \
3101 versatilepb_config :    unconfig
3102         @board/armltd/versatile/split_by_variant.sh $@
3103
3104 voiceblue_config:       unconfig
3105         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3106
3107 #########################################################################
3108 ## S3C44B0 Systems
3109 #########################################################################
3110
3111 B2_config       :       unconfig
3112         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3113
3114 #########################################################################
3115 ## ARM720T Systems
3116 #########################################################################
3117
3118 armadillo_config:       unconfig
3119         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3120
3121 ep7312_config   :       unconfig
3122         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3123
3124 impa7_config    :       unconfig
3125         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3126
3127 modnet50_config :       unconfig
3128         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3129
3130 evb4510_config :        unconfig
3131         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3132
3133 lpc2292sodimm_config:   unconfig
3134         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3135
3136 SMN42_config    :       unconfig
3137         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3138
3139 #########################################################################
3140 ## ARM CORTEX Systems
3141 #########################################################################
3142
3143 devkit8000_config :     unconfig
3144         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3145
3146 omap3_beagle_config :   unconfig
3147         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3148
3149 omap3_overo_config :    unconfig
3150         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3151
3152 omap3_evm_config :      unconfig
3153         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3154
3155 omap3_pandora_config :  unconfig
3156         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3157
3158 omap3_sdp3430_config :  unconfig
3159         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3160
3161 omap3_zoom1_config :    unconfig
3162         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3163
3164 omap3_zoom2_config :    unconfig
3165         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3166
3167 smdkc100_config:        unconfig
3168         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3169
3170 #########################################################################
3171 ## XScale Systems
3172 #########################################################################
3173
3174 actux1_config   :       unconfig
3175         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3176
3177 actux2_config   :       unconfig
3178         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3179
3180 actux3_config   :       unconfig
3181         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3182
3183 actux4_config   :       unconfig
3184         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3185
3186 cerf250_config :        unconfig
3187         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3188
3189 cradle_config   :       unconfig
3190         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3191
3192 csb226_config   :       unconfig
3193         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3194
3195 delta_config :  unconfig
3196         @$(MKCONFIG) $(@:_config=) arm pxa delta
3197
3198 innokom_config  :       unconfig
3199         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3200
3201 ixdp425_config  :       unconfig
3202         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3203
3204 ixdpg425_config :       unconfig
3205         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3206
3207 lubbock_config  :       unconfig
3208         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3209
3210 pleb2_config    :       unconfig
3211         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3212
3213 logodl_config   :       unconfig
3214         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3215
3216 pdnb3_config \
3217 scpu_config:    unconfig
3218         @mkdir -p $(obj)include
3219         @if [ "$(findstring scpu_,$@)" ] ; then \
3220                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3221                 $(XECHO) "... on SCPU board variant" ; \
3222         fi
3223         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3224
3225 pxa255_idp_config:      unconfig
3226         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3227
3228 polaris_config \
3229 trizepsiv_config        :       unconfig
3230         @mkdir -p $(obj)include
3231         @if [ "$(findstring polaris,$@)" ] ; then \
3232                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3233         fi;
3234         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3235
3236 wepep250_config :       unconfig
3237         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3238
3239 xaeniax_config  :       unconfig
3240         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3241
3242 xm250_config    :       unconfig
3243         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3244
3245 xsengine_config :       unconfig
3246         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3247
3248 zylonite_config :
3249         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3250
3251 #########################################################################
3252 ## ARM1136 Systems
3253 #########################################################################
3254
3255 apollon_config          : unconfig
3256         @mkdir -p $(obj)include
3257         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3258         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3259         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3260
3261 imx31_litekit_config    : unconfig
3262         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3263
3264 imx31_phycore_eet_config \
3265 imx31_phycore_config    : unconfig
3266         @mkdir -p $(obj)include
3267         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3268                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3269         fi
3270         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3271
3272 mx31ads_config          : unconfig
3273         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3274
3275 mx31pdk_config \
3276 mx31pdk_nand_config     : unconfig
3277         @mkdir -p $(obj)include
3278         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3279                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3280         else                                                                            \
3281                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3282                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3283         fi
3284         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3285
3286 omap2420h4_config       : unconfig
3287         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3288
3289 qong_config             : unconfig
3290         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3291
3292 #########################################################################
3293 ## ARM1176 Systems
3294 #########################################################################
3295 smdk6400_noUSB_config   \
3296 smdk6400_config :       unconfig
3297         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3298         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3299         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3300         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3301                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3302                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3303         else                                                                            \
3304                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3305                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3306         fi
3307         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3308
3309 #========================================================================
3310 # i386
3311 #========================================================================
3312 #########################################################################
3313 ## AMD SC520 CDP
3314 #########################################################################
3315 eNET_config     :       unconfig
3316         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3317
3318 sc520_cdp_config        :       unconfig
3319         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3320
3321 sc520_spunk_config      :       unconfig
3322         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3323
3324 sc520_spunk_rel_config  :       unconfig
3325         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3326
3327 #========================================================================
3328 # MIPS
3329 #========================================================================
3330 #########################################################################
3331 ## MIPS32 4Kc
3332 #########################################################################
3333
3334 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3335
3336 incaip_100MHz_config    \
3337 incaip_133MHz_config    \
3338 incaip_150MHz_config    \
3339 incaip_config: unconfig
3340         @mkdir -p $(obj)include
3341         @[ -z "$(findstring _100MHz,$@)" ] || \
3342                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3343                   $(XECHO) "... with 100MHz system clock" ; \
3344                 }
3345         @[ -z "$(findstring _133MHz,$@)" ] || \
3346                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3347                   $(XECHO) "... with 133MHz system clock" ; \
3348                 }
3349         @[ -z "$(findstring _150MHz,$@)" ] || \
3350                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3351                   $(XECHO) "... with 150MHz system clock" ; \
3352                 }
3353         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3354
3355 tb0229_config: unconfig
3356         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3357
3358 vct_premium_config              \
3359 vct_premium_small_config        \
3360 vct_premium_onenand_config      \
3361 vct_premium_onenand_small_config \
3362 vct_platinum_config             \
3363 vct_platinum_small_config       \
3364 vct_platinum_onenand_config     \
3365 vct_platinum_onenand_small_config \
3366 vct_platinumavc_config          \
3367 vct_platinumavc_small_config    \
3368 vct_platinumavc_onenand_config  \
3369 vct_platinumavc_onenand_small_config: unconfig
3370         @mkdir -p $(obj)include
3371         @if [ "$(findstring _premium,$@)" ] ; then \
3372                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3373                 $(XECHO) "... on Premium board variant" ; \
3374         fi
3375         @if [ "$(findstring _platinum_,$@)" ] ; then \
3376                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3377                 $(XECHO) "... on Platinum board variant" ; \
3378         fi
3379         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3380                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3381                 $(XECHO) "... on PlatinumAVC board variant" ; \
3382         fi
3383         @if [ "$(findstring _onenand,$@)" ] ; then \
3384                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3385                 $(XECHO) "... on OneNAND board variant" ; \
3386         fi
3387         @if [ "$(findstring _small,$@)" ] ; then \
3388                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3389                 $(XECHO) "... stripped down image variant" ; \
3390         fi
3391         @$(MKCONFIG) -a vct mips mips vct micronas
3392
3393 #########################################################################
3394 ## MIPS32 AU1X00
3395 #########################################################################
3396
3397 dbau1000_config         :       unconfig
3398         @mkdir -p $(obj)include
3399         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3400         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3401
3402 dbau1100_config         :       unconfig
3403         @mkdir -p $(obj)include
3404         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3405         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3406
3407 dbau1500_config         :       unconfig
3408         @mkdir -p $(obj)include
3409         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3410         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3411
3412 dbau1550_config         :       unconfig
3413         @mkdir -p $(obj)include
3414         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3415         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3416
3417 dbau1550_el_config      :       unconfig
3418         @mkdir -p $(obj)include
3419         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3420         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3421
3422 gth2_config             :       unconfig
3423         @mkdir -p $(obj)include
3424         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3425         @$(MKCONFIG) -a gth2 mips mips gth2
3426
3427 pb1000_config           :       unconfig
3428         @mkdir -p $(obj)include
3429         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3430         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3431
3432 qemu_mips_config        : unconfig
3433         @mkdir -p $(obj)include
3434         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3435         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3436
3437 #########################################################################
3438 ## MIPS64 5Kc
3439 #########################################################################
3440
3441 purple_config :         unconfig
3442         @$(MKCONFIG) $(@:_config=) mips mips purple
3443
3444 #========================================================================
3445 # Nios
3446 #========================================================================
3447 #########################################################################
3448 ## Nios32
3449 #########################################################################
3450
3451 ADNPESC1_DNPEVA2_base_32_config \
3452 ADNPESC1_base_32_config         \
3453 ADNPESC1_config: unconfig
3454         @mkdir -p $(obj)include
3455         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3456                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3457                   $(XECHO) "... DNP/EVA2 configuration" ; \
3458                 }
3459         @[ -z "$(findstring _base_32,$@)" ] || \
3460                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3461                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3462                 }
3463         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3464                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3465                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3466                 }
3467         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3468
3469 DK1C20_safe_32_config           \
3470 DK1C20_standard_32_config       \
3471 DK1C20_config:  unconfig
3472         @mkdir -p $(obj)include
3473         @[ -z "$(findstring _safe_32,$@)" ] || \
3474                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3475                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3476                 }
3477         @[ -z "$(findstring _standard_32,$@)" ] || \
3478                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3479                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3480                 }
3481         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3482                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3483                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3484                 }
3485         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3486
3487 DK1S10_safe_32_config           \
3488 DK1S10_standard_32_config       \
3489 DK1S10_mtx_ldk_20_config        \
3490 DK1S10_config:  unconfig
3491         @mkdir -p $(obj)include
3492         @[ -z "$(findstring _safe_32,$@)" ] || \
3493                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3494                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3495                 }
3496         @[ -z "$(findstring _standard_32,$@)" ] || \
3497                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3498                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3499                 }
3500         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3501                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3502                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3503                 }
3504         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3505                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3506                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3507                 }
3508         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3509
3510 #########################################################################
3511 ## Nios-II
3512 #########################################################################
3513
3514 EP1C20_config : unconfig
3515         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3516
3517 EP1S10_config : unconfig
3518         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3519
3520 EP1S40_config : unconfig
3521         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3522
3523 PK1C20_config : unconfig
3524         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3525
3526 PCI5441_config : unconfig
3527         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3528
3529 #========================================================================
3530 ## Microblaze
3531 #========================================================================
3532
3533 microblaze-generic_config:      unconfig
3534         @mkdir -p $(obj)include
3535         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3536
3537 #========================================================================
3538 # Blackfin
3539 #========================================================================
3540
3541 # Analog Devices boards
3542 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3543         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3544
3545 # Bluetechnix tinyboards
3546 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \
3547         tcm-bf518 tcm-bf537
3548
3549 # Misc third party boards
3550 BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp
3551
3552 # I-SYST Micromodule
3553 BFIN_BOARDS += ibf-dsp561
3554
3555 $(BFIN_BOARDS:%=%_config)       : unconfig
3556         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3557
3558 bf527-ezkit-v2_config   : unconfig
3559         @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
3560                 bf527-ezkit blackfin blackfin bf527-ezkit
3561
3562 #========================================================================
3563 # AVR32
3564 #========================================================================
3565
3566 atngw100_config :       unconfig
3567         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3568
3569 atstk1002_config        :       unconfig
3570         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3571
3572 atstk1003_config        :       unconfig
3573         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3574
3575 atstk1004_config        :       unconfig
3576         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3577
3578 atstk1006_config        :       unconfig
3579         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3580
3581 favr-32-ezkit_config    :       unconfig
3582         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3583
3584 hammerhead_config       :       unconfig
3585         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3586
3587 mimc200_config          :       unconfig
3588         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3589
3590 #========================================================================
3591 # SH3 (SuperH)
3592 #========================================================================
3593
3594 #########################################################################
3595 ## sh2 (Renesas SuperH)
3596 #########################################################################
3597 rsk7203_config: unconfig
3598         @mkdir -p $(obj)include
3599         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3600         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3601
3602 #########################################################################
3603 ## sh3 (Renesas SuperH)
3604 #########################################################################
3605
3606 mpr2_config: unconfig
3607         @mkdir -p $(obj)include
3608         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3609         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3610
3611 ms7720se_config: unconfig
3612         @mkdir -p $(obj)include
3613         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3614         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3615
3616 #########################################################################
3617 ## sh4 (Renesas SuperH)
3618 #########################################################################
3619
3620 MigoR_config :       unconfig
3621         @mkdir -p $(obj)include
3622         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3623         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3624
3625 ms7750se_config: unconfig
3626         @mkdir -p $(obj)include
3627         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3628         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3629
3630 ms7722se_config :       unconfig
3631         @mkdir -p $(obj)include
3632         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3633         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3634
3635 r2dplus_config  :   unconfig
3636         @mkdir -p $(obj)include
3637         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3638         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3639
3640 r7780mp_config: unconfig
3641         @mkdir -p $(obj)include
3642         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3643         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3644
3645 sh7763rdp_config  :   unconfig
3646         @mkdir -p $(obj)include
3647         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3648         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3649
3650 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3651 sh7785lcr_32bit_config \
3652 sh7785lcr_config  :   unconfig
3653         @mkdir -p $(obj)include
3654         @mkdir -p $(obj)board/renesas/sh7785lcr
3655         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3656         @if [ "$(findstring 32bit, $@)" ] ; then \
3657                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3658                 echo "TEXT_BASE = 0x8ff80000" > \
3659                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3660                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3661         fi
3662         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3663
3664 ap325rxa_config  :   unconfig
3665         @mkdir -p $(obj)include
3666         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3667         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3668
3669 espt_config  :   unconfig
3670         @mkdir -p $(obj)include
3671         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3672         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3673
3674 #========================================================================
3675 # SPARC
3676 #========================================================================
3677
3678 #########################################################################
3679 ## LEON3
3680 #########################################################################
3681
3682 # Gaisler GR-XC3S-1500 board
3683 gr_xc3s_1500_config : unconfig
3684         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3685
3686 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3687 gr_cpci_ax2000_config : unconfig
3688         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3689
3690 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3691 # Development board Stratix II edition, FPGA Device EP2S60.
3692 gr_ep2s60_config: unconfig
3693         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3694
3695 # Gaisler LEON3 GRSIM simulator
3696 grsim_config : unconfig
3697         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3698
3699 #########################################################################
3700 ## LEON2
3701 #########################################################################
3702
3703 # Gaisler LEON2 GRSIM simulator
3704 grsim_leon2_config : unconfig
3705         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3706
3707 #########################################################################
3708 #########################################################################
3709 #########################################################################
3710
3711 clean:
3712         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3713                $(obj)examples/standalone/atmel_df_pow2                    \
3714                $(obj)examples/standalone/eepro100_eeprom                  \
3715                $(obj)examples/standalone/hello_world                      \
3716                $(obj)examples/standalone/interrupt                        \
3717                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3718                $(obj)examples/standalone/sched                            \
3719                $(obj)examples/standalone/smc91111_eeprom                  \
3720                $(obj)examples/standalone/test_burst                       \
3721                $(obj)examples/standalone/timer
3722         @rm -f $(obj)examples/api/demo{,.bin}
3723         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3724                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3725                $(obj)tools/envcrc                                         \
3726                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3727                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3728                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3729                $(obj)tools/ncb             $(obj)tools/ubsha1
3730         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3731                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3732                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3733                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3734                $(obj)lib_blackfin/u-boot.lds                              \
3735                $(obj)u-boot.lds                                           \
3736                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3737         @rm -f $(obj)include/bmp_logo.h
3738         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3739         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3740         @rm -f $(ONENAND_BIN)
3741         @rm -f $(obj)onenand_ipl/u-boot.lds
3742         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3743         @find $(OBJTREE) -type f \
3744                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3745                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3746                 | xargs rm -f
3747
3748 clobber:        clean
3749         @find $(OBJTREE) -type f \( -name .depend \
3750                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3751                 -print0 \
3752                 | xargs -0 rm -f
3753         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3754                 $(obj)cscope.* $(obj)*.*~
3755         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3756         @rm -f $(obj)u-boot.kwb
3757         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3758         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3759         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3760         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3761         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3762
3763 ifeq ($(OBJTREE),$(SRCTREE))
3764 mrproper \
3765 distclean:      clobber unconfig
3766 else
3767 mrproper \
3768 distclean:      clobber unconfig
3769         rm -rf $(obj)*
3770 endif
3771
3772 backup:
3773         F=`basename $(TOPDIR)` ; cd .. ; \
3774         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3775
3776 #########################################################################