Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 11
  26 SUBLEVEL =
  27 EXTRAVERSION = -rc2
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 TAG_SUBDIRS += cpu/mpc8xxx
 234 endif
 235 ifeq ($(CPU),mpc86xx)
 236 LIBS += cpu/mpc8xxx/ddr/libddr.a
 237 LIBS += cpu/mpc8xxx/lib8xxx.a
 238 TAG_SUBDIRS += cpu/mpc8xxx
 239 endif
 240 LIBS += drivers/rtc/librtc.a
 241 LIBS += drivers/serial/libserial.a
 242 LIBS += drivers/twserial/libtws.a
 243 LIBS += drivers/usb/gadget/libusb_gadget.a
 244 LIBS += drivers/usb/host/libusb_host.a
 245 LIBS += drivers/usb/musb/libusb_musb.a
 246 LIBS += drivers/video/libvideo.a
 247 LIBS += drivers/watchdog/libwatchdog.a
 248 LIBS += common/libcommon.a
 249 LIBS += libfdt/libfdt.a
 250 LIBS += api/libapi.a
 251 LIBS += post/libpost.a
 252
 253 LIBS := $(addprefix $(obj),$(LIBS))
 254 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 255
 256 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 257 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 258
 259 # Add GCC lib
 260 ifdef USE_PRIVATE_LIBGCC
 261 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 262 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 263 else
 264 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 265 endif
 266 else
 267 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 268 endif
 269 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 270 export PLATFORM_LIBS
 271
 272 # Special flags for CPP when processing the linker script.
 273 # Pass the version down so we can handle backwards compatibility
 274 # on the fly.
 275 LDPPFLAGS += \
 276         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 277         $(shell $(LD) --version | \
 278           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 279
 280 ifeq ($(CONFIG_NAND_U_BOOT),y)
 281 NAND_SPL = nand_spl
 282 U_BOOT_NAND = $(obj)u-boot-nand.bin
 283 endif
 284
 285 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 286 ONENAND_IPL = onenand_ipl
 287 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 288 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 289 endif
 290
 291 __OBJS := $(subst $(obj),,$(OBJS))
 292 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 293
 294 #########################################################################
 295 #########################################################################
 296
 297 # Always append ALL so that arch config.mk's can add custom ones
 298 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 299
 300 all:            $(ALL)
 301
 302 $(obj)u-boot.hex:       $(obj)u-boot
 303                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 304
 305 $(obj)u-boot.srec:      $(obj)u-boot
 306                 $(OBJCOPY) -O srec $< $@
 307
 308 $(obj)u-boot.bin:       $(obj)u-boot
 309                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 310
 311 $(obj)u-boot.ldr:       $(obj)u-boot
 312                 $(obj)tools/envcrc --binary > $(obj)env-ldr.o
 313                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 314
 315 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 316                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 317
 318 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 319                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 320
 321 $(obj)u-boot.img:       $(obj)u-boot.bin
 322                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 323                 -a $(TEXT_BASE) -e 0 \
 324                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 325                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 326                 -d $< $@
 327
 328 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 329                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 330                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 331
 332 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 333                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 334
 335 $(obj)u-boot.dis:       $(obj)u-boot
 336                 $(OBJDUMP) -d $< > $@
 337
 338 GEN_UBOOT = \
 339                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 340                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 341                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 342                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 343                         -Map u-boot.map -o u-boot
 344 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 345                 $(GEN_UBOOT)
 346 ifeq ($(CONFIG_KALLSYMS),y)
 347                 smap=`$(call SYSTEM_MAP,u-boot) | \
 348                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 349                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 350                         -c common/system_map.c -o $(obj)common/system_map.o
 351                 $(GEN_UBOOT) $(obj)common/system_map.o
 352 endif
 353
 354 $(OBJS):        depend
 355                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 356
 357 $(LIBS):        depend $(SUBDIRS)
 358                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 359
 360 $(LIBBOARD):    depend $(LIBS)
 361                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 362
 363 $(SUBDIRS):     depend
 364                 $(MAKE) -C $@ all
 365
 366 $(LDSCRIPT):    depend
 367                 $(MAKE) -C $(dir $@) $(notdir $@)
 368
 369 $(obj)u-boot.lds: $(LDSCRIPT)
 370                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 371
 372 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 373                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 374
 375 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 376                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 377
 378 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 379                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 380
 381 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 382                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 383
 384 $(VERSION_FILE):
 385                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 386                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 387                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 388
 389 $(TIMESTAMP_FILE):
 390                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 391                 @date +'#define U_BOOT_TIME "%T"' >> $@
 392
 393 gdbtools:
 394                 $(MAKE) -C tools/gdb all || exit 1
 395
 396 updater:
 397                 $(MAKE) -C tools/updater all || exit 1
 398
 399 env:
 400                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 401
 402 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 403                 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 404
 405 TAG_SUBDIRS += include
 406 TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
 407 TAG_SUBDIRS += cpu/$(CPU)
 408 TAG_SUBDIRS += lib_$(ARCH)
 409 TAG_SUBDIRS += fs/cramfs
 410 TAG_SUBDIRS += fs/fat
 411 TAG_SUBDIRS += fs/fdos
 412 TAG_SUBDIRS += fs/jffs2
 413 TAG_SUBDIRS += fs/yaffs2
 414 TAG_SUBDIRS += net
 415 TAG_SUBDIRS += disk
 416 TAG_SUBDIRS += common
 417 TAG_SUBDIRS += drivers/bios_emulator
 418 TAG_SUBDIRS += drivers/block
 419 TAG_SUBDIRS += drivers/gpio
 420 TAG_SUBDIRS += drivers/hwmon
 421 TAG_SUBDIRS += drivers/i2c
 422 TAG_SUBDIRS += drivers/input
 423 TAG_SUBDIRS += drivers/misc
 424 TAG_SUBDIRS += drivers/mmc
 425 TAG_SUBDIRS += drivers/mtd
 426 TAG_SUBDIRS += drivers/mtd/nand
 427 TAG_SUBDIRS += drivers/mtd/onenand
 428 TAG_SUBDIRS += drivers/mtd/spi
 429 TAG_SUBDIRS += drivers/net
 430 TAG_SUBDIRS += drivers/net/sk98lin
 431 TAG_SUBDIRS += drivers/pci
 432 TAG_SUBDIRS += drivers/pcmcia
 433 TAG_SUBDIRS += drivers/qe
 434 TAG_SUBDIRS += drivers/rtc
 435 TAG_SUBDIRS += drivers/serial
 436 TAG_SUBDIRS += drivers/spi
 437 TAG_SUBDIRS += drivers/usb
 438 TAG_SUBDIRS += drivers/video
 439
 440 tags ctags:
 441                 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 442                                                 -name '*.[ch]' -print`
 443
 444 etags:
 445                 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 446                                                 -name '*.[ch]' -print`
 447 cscope:
 448                 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
 449                                                 > cscope.files
 450                 cscope -b -q -k
 451
 452 SYSTEM_MAP = \
 453                 $(NM) $1 | \
 454                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 455                 LC_ALL=C sort
 456 $(obj)System.map:       $(obj)u-boot
 457                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 458
 459 #
 460 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 461 #
 462 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 463 # the dep file is only include in this top level makefile to determine when
 464 # to regenerate the autoconf.mk file.
 465 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 466         @$(XECHO) Generating $@ ; \
 467         set -e ; \
 468         : Generate the dependancies ; \
 469         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 470                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 471
 472 $(obj)include/autoconf.mk: $(obj)include/config.h
 473         @$(XECHO) Generating $@ ; \
 474         set -e ; \
 475         : Extract the config macros ; \
 476         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 477                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 478         mv $@.tmp $@
 479
 480 #########################################################################
 481 else    # !config.mk
 482 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 483 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 484 $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 485 dep tags ctags etags cscope $(obj)System.map:
 486         @echo "System not configured - see README" >&2
 487         @ exit 1
 488 endif   # config.mk
 489
 490 .PHONY : CHANGELOG
 491 CHANGELOG:
 492         git log --no-merges U-Boot-1_1_5.. | \
 493         unexpand -a | sed -e 's/\s\s*$$//' > $@
 494
 495 include/license.h: tools/bin2header COPYING
 496          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 497 #########################################################################
 498
 499 unconfig:
 500         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 501                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 502                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 503
 504 %: %_config
 505         $(MAKE)
 506
 507 #========================================================================
 508 # PowerPC
 509 #========================================================================
 510
 511 #########################################################################
 512 ## MPC5xx Systems
 513 #########################################################################
 514
 515 canmb_config:   unconfig
 516         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 517
 518 cmi_mpc5xx_config:      unconfig
 519         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 520
 521 PATI_config:            unconfig
 522         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 523
 524 #########################################################################
 525 ## MPC5xxx Systems
 526 #########################################################################
 527
 528 aev_config: unconfig
 529         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 530
 531 BC3450_config:  unconfig
 532         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 533
 534 cm5200_config:  unconfig
 535         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 536
 537 cpci5200_config:  unconfig
 538         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 539
 540 digsy_mtc_config \
 541 digsy_mtc_LOWBOOT_config        \
 542 digsy_mtc_RAMBOOT_config:       unconfig
 543         @mkdir -p $(obj)include
 544         @mkdir -p $(obj)board/digsy_mtc
 545         @ >$(obj)include/config.h
 546         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 547                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 548                   echo "... with LOWBOOT configuration" ; \
 549                 }
 550         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 551                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 552                   echo "... with RAMBOOT configuration" ; \
 553                 }
 554         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 555
 556 galaxy5200_LOWBOOT_config \
 557 galaxy5200_config:      unconfig
 558         @mkdir -p $(obj)include
 559         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 560         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 561
 562 hmi1001_config: unconfig
 563         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 564
 565 Lite5200_config                         \
 566 Lite5200_LOWBOOT_config                 \
 567 Lite5200_LOWBOOT08_config               \
 568 icecube_5200_config                     \
 569 icecube_5200_LOWBOOT_config             \
 570 icecube_5200_LOWBOOT08_config           \
 571 icecube_5200_DDR_config                 \
 572 icecube_5200_DDR_LOWBOOT_config         \
 573 icecube_5200_DDR_LOWBOOT08_config       \
 574 icecube_5100_config:                    unconfig
 575         @mkdir -p $(obj)include
 576         @mkdir -p $(obj)board/icecube
 577         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 578                 { if [ "$(findstring DDR,$@)" ] ; \
 579                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 580                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 581                   fi ; \
 582                   $(XECHO) "... with LOWBOOT configuration" ; \
 583                 }
 584         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 585                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 586                   echo "... with 8 MB flash only" ; \
 587                   $(XECHO) "... with LOWBOOT configuration" ; \
 588                 }
 589         @[ -z "$(findstring DDR,$@)" ] || \
 590                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 591                   $(XECHO) "... DDR memory revision" ; \
 592                 }
 593         @[ -z "$(findstring 5200,$@)" ] || \
 594                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 595                   $(XECHO) "... with MPC5200 processor" ; \
 596                 }
 597         @[ -z "$(findstring 5100,$@)" ] || \
 598                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 599                   $(XECHO) "... with MGT5100 processor" ; \
 600                 }
 601         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 602
 603 jupiter_config: unconfig
 604         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 605
 606 inka4x0_config: unconfig
 607         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 608
 609 lite5200b_config        \
 610 lite5200b_PM_config     \
 611 lite5200b_LOWBOOT_config:       unconfig
 612         @mkdir -p $(obj)include
 613         @mkdir -p $(obj)board/icecube
 614         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 615         @ $(XECHO) "... DDR memory revision"
 616         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 617         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 618         @[ -z "$(findstring _PM_,$@)" ] || \
 619                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 620                   $(XECHO) "... with power management (low-power mode) support" ; \
 621                 }
 622         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 623                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 624                   $(XECHO) "... with LOWBOOT configuration" ; \
 625                 }
 626         @ $(XECHO) "... with MPC5200B processor"
 627         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 628
 629 mcc200_config   \
 630 mcc200_SDRAM_config     \
 631 mcc200_highboot_config  \
 632 mcc200_COM12_config     \
 633 mcc200_COM12_SDRAM_config       \
 634 mcc200_COM12_highboot_config    \
 635 mcc200_COM12_highboot_SDRAM_config      \
 636 mcc200_highboot_SDRAM_config    \
 637 prs200_config   \
 638 prs200_DDR_config       \
 639 prs200_highboot_config  \
 640 prs200_highboot_DDR_config:     unconfig
 641         @mkdir -p $(obj)include
 642         @mkdir -p $(obj)board/mcc200
 643         @[ -n "$(findstring highboot,$@)" ] || \
 644                 { $(XECHO) "... with lowboot configuration" ; \
 645                 }
 646         @[ -z "$(findstring highboot,$@)" ] || \
 647                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 648                   $(XECHO) "... with highboot configuration" ; \
 649                 }
 650         @[ -n "$(findstring _SDRAM,$@)" ] || \
 651                 { if [ -n "$(findstring mcc200,$@)" ]; \
 652                   then \
 653                         $(XECHO) "... with DDR" ; \
 654                   else \
 655                         if [ -n "$(findstring _DDR,$@)" ];\
 656                         then \
 657                                 $(XECHO) "... with DDR" ; \
 658                         else \
 659                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 660                                 $(XECHO) "... with SDRAM" ; \
 661                         fi; \
 662                   fi; \
 663                 }
 664         @[ -z "$(findstring _SDRAM,$@)" ] || \
 665                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 666                   $(XECHO) "... with SDRAM" ; \
 667                 }
 668         @[ -z "$(findstring COM12,$@)" ] || \
 669                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 670                   $(XECHO) "... with console on COM12" ; \
 671                 }
 672         @[ -z "$(findstring prs200,$@)" ] || \
 673                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 674                 }
 675         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 676
 677 mecp5200_config:  unconfig
 678         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 679
 680 motionpro_config:       unconfig
 681         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 682
 683 mucmc52_config:         unconfig
 684         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 685
 686 munices_config: unconfig
 687         @$(MKCONFIG) munices ppc mpc5xxx munices
 688
 689 MVBC_P_config: unconfig
 690         @mkdir -p $(obj)include
 691         @mkdir -p $(obj)board/mvbc_p
 692         @ >$(obj)include/config.h
 693         @[ -z "$(findstring MVBC_P,$@)" ] || \
 694         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 695         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 696
 697 o2dnt_config:   unconfig
 698         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 699
 700 pcm030_config \
 701 pcm030_LOWBOOT_config:  unconfig
 702         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 703         @ >$(obj)include/config.h
 704         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 705                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 706                   echo "... with LOWBOOT configuration" ; \
 707                 }
 708         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 709
 710 pf5200_config:  unconfig
 711         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 712
 713 PM520_config \
 714 PM520_DDR_config \
 715 PM520_ROMBOOT_config \
 716 PM520_ROMBOOT_DDR_config:       unconfig
 717         @mkdir -p $(obj)include
 718         @[ -z "$(findstring DDR,$@)" ] || \
 719                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 720                   $(XECHO) "... DDR memory revision" ; \
 721                 }
 722         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 723                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 724                   $(XECHO) "... booting from 8-bit flash" ; \
 725                 }
 726         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 727
 728 smmaco4_config: unconfig
 729         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 730
 731 spieval_config: unconfig
 732         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 733
 734 TB5200_B_config \
 735 TB5200_config:  unconfig
 736         @mkdir -p $(obj)include
 737         @[ -z "$(findstring _B,$@)" ] || \
 738                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 739                   $(XECHO) "... with MPC5200B processor" ; \
 740                 }
 741         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 742
 743 MINI5200_config \
 744 EVAL5200_config \
 745 TOP5200_config: unconfig
 746         @mkdir -p $(obj)include
 747         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 748         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 749
 750 Total5100_config                \
 751 Total5200_config                \
 752 Total5200_lowboot_config        \
 753 Total5200_Rev2_config           \
 754 Total5200_Rev2_lowboot_config:  unconfig
 755         @mkdir -p $(obj)include
 756         @mkdir -p $(obj)board/total5200
 757         @[ -z "$(findstring 5100,$@)" ] || \
 758                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 759                   $(XECHO) "... with MGT5100 processor" ; \
 760                 }
 761         @[ -z "$(findstring 5200,$@)" ] || \
 762                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 763                   $(XECHO) "... with MPC5200 processor" ; \
 764                 }
 765         @[ -n "$(findstring Rev,$@)" ] || \
 766                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 767                   $(XECHO) "... revision 1 board" ; \
 768                 }
 769         @[ -z "$(findstring Rev2_,$@)" ] || \
 770                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 771                   $(XECHO) "... revision 2 board" ; \
 772                 }
 773         @[ -z "$(findstring lowboot_,$@)" ] || \
 774                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 775                   $(XECHO) "... with lowboot configuration" ; \
 776                 }
 777         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 778
 779 cam5200_config \
 780 cam5200_niosflash_config \
 781 fo300_config \
 782 MiniFAP_config \
 783 TQM5200S_config \
 784 TQM5200S_HIGHBOOT_config \
 785 TQM5200_B_config \
 786 TQM5200_B_HIGHBOOT_config \
 787 TQM5200_config  \
 788 TQM5200_STK100_config:  unconfig
 789         @mkdir -p $(obj)include
 790         @mkdir -p $(obj)board/tqc/tqm5200
 791         @[ -z "$(findstring cam5200,$@)" ] || \
 792                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 793                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 794                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 795                   $(XECHO) "... TQM5200S on Cam5200" ; \
 796                 }
 797         @[ -z "$(findstring niosflash,$@)" ] || \
 798                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 799                   $(XECHO) "... with NIOS flash driver" ; \
 800                 }
 801         @[ -z "$(findstring fo300,$@)" ] || \
 802                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 803                   $(XECHO) "... TQM5200 on FO300" ; \
 804                 }
 805         @[ -z "$(findstring MiniFAP,$@)" ] || \
 806                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 807                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 808                 }
 809         @[ -z "$(findstring STK100,$@)" ] || \
 810                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 811                   $(XECHO) "... on a STK52XX.100 base board" ; \
 812                 }
 813         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 814                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 815                 }
 816         @[ -z "$(findstring TQM5200S,$@)" ] || \
 817                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 818                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 819                 }
 820         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 821                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 822                 }
 823         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 824
 825 uc101_config:           unconfig
 826         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 827
 828 v38b_config: unconfig
 829         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 830
 831 #########################################################################
 832 ## MPC512x Systems
 833 #########################################################################
 834
 835 aria_config:    unconfig
 836         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 837
 838 mecp5123_config:        unconfig
 839         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 840
 841 mpc5121ads_config \
 842 mpc5121ads_rev2_config  \
 843         : unconfig
 844         @mkdir -p $(obj)include
 845         @if [ "$(findstring rev2,$@)" ] ; then \
 846                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 847         fi
 848         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 849
 850 #########################################################################
 851 ## MPC8xx Systems
 852 #########################################################################
 853
 854 Adder_config    \
 855 Adder87x_config \
 856 AdderII_config  \
 857         :               unconfig
 858         @mkdir -p $(obj)include
 859         $(if $(findstring AdderII,$@), \
 860         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 861         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 862
 863 AdderUSB_config:        unconfig
 864         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 865
 866 ADS860_config     \
 867 FADS823_config    \
 868 FADS850SAR_config \
 869 MPC86xADS_config  \
 870 MPC885ADS_config  \
 871 FADS860T_config:        unconfig
 872         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 873
 874 AMX860_config   :       unconfig
 875         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 876
 877 c2mon_config:           unconfig
 878         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 879
 880 CCM_config:             unconfig
 881         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 882
 883 cogent_mpc8xx_config:   unconfig
 884         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 885
 886 ELPT860_config:         unconfig
 887         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 888
 889 EP88x_config:           unconfig
 890         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 891
 892 ESTEEM192E_config:      unconfig
 893         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 894
 895 ETX094_config   :       unconfig
 896         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 897
 898 FLAGADM_config: unconfig
 899         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 900
 901 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 902
 903 GEN860T_SC_config       \
 904 GEN860T_config: unconfig
 905         @mkdir -p $(obj)include
 906         @[ -z "$(findstring _SC,$@)" ] || \
 907                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 908                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 909                 }
 910         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 911
 912 GENIETV_config: unconfig
 913         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 914
 915 GTH_config:     unconfig
 916         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 917
 918 hermes_config   :       unconfig
 919         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 920
 921 HMI10_config    :       unconfig
 922         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 923
 924 IAD210_config: unconfig
 925         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 926
 927 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 928
 929 ICU862_100MHz_config    \
 930 ICU862_config: unconfig
 931         @mkdir -p $(obj)include
 932         @[ -z "$(findstring _100MHz,$@)" ] || \
 933                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 934                   $(XECHO) "... with 100MHz system clock" ; \
 935                 }
 936         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 937
 938 IP860_config    :       unconfig
 939         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 940
 941 IVML24_256_config \
 942 IVML24_128_config \
 943 IVML24_config:  unconfig
 944         @mkdir -p $(obj)include
 945         @[ -z "$(findstring IVML24_config,$@)" ] || \
 946                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 947                  }
 948         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 949                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 950                  }
 951         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 952                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 953                  }
 954         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 955
 956 IVMS8_256_config \
 957 IVMS8_128_config \
 958 IVMS8_config:   unconfig
 959         @mkdir -p $(obj)include
 960         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 961                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 962                  }
 963         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 964                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 965                  }
 966         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 967                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 968                  }
 969         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 970
 971 kmsupx4_config:         unconfig
 972         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 973
 974 KUP4K_config    :       unconfig
 975         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 976
 977 KUP4X_config    :       unconfig
 978         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 979
 980 LANTEC_config   :       unconfig
 981         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 982
 983 lwmon_config:           unconfig
 984         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 985
 986 MBX_config      \
 987 MBX860T_config: unconfig
 988         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 989
 990 mgsuvd_config:          unconfig
 991         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 992
 993 MHPC_config:            unconfig
 994         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 995
 996 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 997
 998 NETVIA_V2_config \
 999 NETVIA_config:          unconfig
1000         @mkdir -p $(obj)include
1001         @[ -z "$(findstring NETVIA_config,$@)" ] || \
1002                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
1003                   $(XECHO) "... Version 1" ; \
1004                  }
1005         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
1006                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
1007                   $(XECHO) "... Version 2" ; \
1008                  }
1009         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
1010
1011 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
1012
1013 NETPHONE_V2_config \
1014 NETPHONE_config:        unconfig
1015         @mkdir -p $(obj)include
1016         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
1017                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
1018                  }
1019         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
1020                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
1021                  }
1022         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
1023
1024 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
1025
1026 NETTA_ISDN_6412_SWAPHOOK_config \
1027 NETTA_ISDN_SWAPHOOK_config \
1028 NETTA_6412_SWAPHOOK_config \
1029 NETTA_SWAPHOOK_config \
1030 NETTA_ISDN_6412_config \
1031 NETTA_ISDN_config \
1032 NETTA_6412_config \
1033 NETTA_config:           unconfig
1034         @mkdir -p $(obj)include
1035         @[ -z "$(findstring ISDN_,$@)" ] || \
1036                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1037                  }
1038         @[ -n "$(findstring ISDN_,$@)" ] || \
1039                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1040                  }
1041         @[ -z "$(findstring 6412_,$@)" ] || \
1042                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1043                  }
1044         @[ -n "$(findstring 6412_,$@)" ] || \
1045                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1046                  }
1047         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1048                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1049                  }
1050         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1051                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1052                  }
1053         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1054
1055 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1056
1057 NETTA2_V2_config \
1058 NETTA2_config:          unconfig
1059         @mkdir -p $(obj)include
1060         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1061                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1062                  }
1063         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1064                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1065                  }
1066         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1067
1068 NC650_Rev1_config \
1069 NC650_Rev2_config \
1070 CP850_config:   unconfig
1071         @mkdir -p $(obj)include
1072         @[ -z "$(findstring CP850,$@)" ] || \
1073                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1074                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1075                  }
1076         @[ -z "$(findstring Rev1,$@)" ] || \
1077                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1078                  }
1079         @[ -z "$(findstring Rev2,$@)" ] || \
1080                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1081                  }
1082         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1083
1084 NX823_config:           unconfig
1085         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1086
1087 pcu_e_config:           unconfig
1088         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1089
1090 QS850_config:   unconfig
1091         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1092
1093 QS823_config:   unconfig
1094         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1095
1096 QS860T_config:  unconfig
1097         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1098
1099 quantum_config: unconfig
1100         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1101
1102 R360MPI_config: unconfig
1103         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1104
1105 RBC823_config:  unconfig
1106         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1107
1108 RPXClassic_config:      unconfig
1109         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1110
1111 RPXlite_config:         unconfig
1112         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1113
1114 RPXlite_DW_64_config            \
1115 RPXlite_DW_LCD_config           \
1116 RPXlite_DW_64_LCD_config        \
1117 RPXlite_DW_NVRAM_config         \
1118 RPXlite_DW_NVRAM_64_config      \
1119 RPXlite_DW_NVRAM_LCD_config     \
1120 RPXlite_DW_NVRAM_64_LCD_config  \
1121 RPXlite_DW_config:      unconfig
1122         @mkdir -p $(obj)include
1123         @[ -z "$(findstring _64,$@)" ] || \
1124                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1125                   $(XECHO) "... with 64MHz system clock ..."; \
1126                 }
1127         @[ -z "$(findstring _LCD,$@)" ] || \
1128                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1129                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1130                   $(XECHO) "... with LCD display ..."; \
1131                 }
1132         @[ -z "$(findstring _NVRAM,$@)" ] || \
1133                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1134                   $(XECHO) "... with ENV in NVRAM ..."; \
1135                 }
1136         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1137
1138 rmu_config:     unconfig
1139         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1140
1141 RRvision_config:        unconfig
1142         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1143
1144 RRvision_LCD_config:    unconfig
1145         @mkdir -p $(obj)include
1146         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1147         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1148         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1149
1150 SM850_config    :       unconfig
1151         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1152
1153 spc1920_config:         unconfig
1154         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1155
1156 SPD823TS_config:        unconfig
1157         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1158
1159 stxxtc_config:  unconfig
1160         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1161
1162 svm_sc8xx_config:       unconfig
1163         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1164
1165 SXNI855T_config:        unconfig
1166         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1167
1168 # EMK MPC8xx based modules
1169 TOP860_config:          unconfig
1170         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1171
1172 # Play some tricks for configuration selection
1173 # Only 855 and 860 boards may come with FEC
1174 # and only 823 boards may have LCD support
1175 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1176
1177 FPS850L_config          \
1178 FPS860L_config          \
1179 NSCU_config             \
1180 TQM823L_config          \
1181 TQM823L_LCD_config      \
1182 TQM850L_config          \
1183 TQM855L_config          \
1184 TQM860L_config          \
1185 TQM862L_config          \
1186 TQM823M_config          \
1187 TQM850M_config          \
1188 TQM855M_config          \
1189 TQM860M_config          \
1190 TQM862M_config          \
1191 TQM866M_config          \
1192 TQM885D_config          \
1193 TK885D_config           \
1194 virtlab2_config:        unconfig
1195         @mkdir -p $(obj)include
1196         @[ -z "$(findstring _LCD,$@)" ] || \
1197                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1198                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1199                   $(XECHO) "... with LCD display" ; \
1200                 }
1201         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1202
1203 TTTech_config:  unconfig
1204         @mkdir -p $(obj)include
1205         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1206         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1207         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1208
1209 uc100_config    :       unconfig
1210         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1211
1212 v37_config:     unconfig
1213         @mkdir -p $(obj)include
1214         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1215         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1216         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1217
1218 wtk_config:     unconfig
1219         @mkdir -p $(obj)include
1220         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1221         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1222         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1223
1224 #########################################################################
1225 ## PPC4xx Systems
1226 #########################################################################
1227 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1228
1229 acadia_config:  unconfig
1230         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1231
1232 acadia_nand_config:     unconfig
1233         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1234         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1235         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1236         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1237         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1238         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1239
1240 ADCIOP_config:  unconfig
1241         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1242
1243 alpr_config:    unconfig
1244         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1245
1246 AP1000_config:unconfig
1247         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1248
1249 APC405_config:  unconfig
1250         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1251
1252 AR405_config:   unconfig
1253         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1254
1255 ASH405_config:  unconfig
1256         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1257
1258 bamboo_config:  unconfig
1259         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1260
1261 bamboo_nand_config:     unconfig
1262         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1263         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1264         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1265         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1266         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1267         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1268
1269 bubinga_config: unconfig
1270         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1271
1272 CANBT_config:   unconfig
1273         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1274
1275 # Arches, Canyonlands & Glacier use different U-Boot images
1276 arches_config \
1277 canyonlands_config \
1278 glacier_config: unconfig
1279         @mkdir -p $(obj)include
1280         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1281                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1282         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1283
1284 canyonlands_nand_config \
1285 glacier_nand_config:    unconfig
1286         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1287         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1288         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1289         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1290                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1291         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1292         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1293         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1294
1295 CATcenter_config        \
1296 CATcenter_25_config     \
1297 CATcenter_33_config:    unconfig
1298         @mkdir -p $(obj)include
1299         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1300         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1301         @[ -z "$(findstring _25,$@)" ] || \
1302                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1303                   $(XECHO) "SysClk = 25MHz" ; \
1304                 }
1305         @[ -z "$(findstring _33,$@)" ] || \
1306                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1307                   $(XECHO) "SysClk = 33MHz" ; \
1308                 }
1309         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1310
1311 CMS700_config:  unconfig
1312         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1313
1314 CPCI2DP_config: unconfig
1315         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1316
1317 CPCI405_config          \
1318 CPCI4052_config         \
1319 CPCI405DT_config        \
1320 CPCI405AB_config:       unconfig
1321         @mkdir -p $(obj)board/esd/cpci405
1322         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1323
1324 CPCIISER4_config:       unconfig
1325         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1326
1327 CRAYL1_config:  unconfig
1328         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1329
1330 csb272_config:  unconfig
1331         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1332
1333 csb472_config:  unconfig
1334         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1335
1336 DASA_SIM_config: unconfig
1337         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1338
1339 dlvision_config: unconfig
1340         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1341
1342 DP405_config:   unconfig
1343         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1344
1345 DU405_config:   unconfig
1346         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1347
1348 DU440_config:   unconfig
1349         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1350
1351 ebony_config:   unconfig
1352         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1353
1354 ERIC_config:    unconfig
1355         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1356
1357 EXBITGEN_config:        unconfig
1358         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1359
1360 fx12mm_flash_config: unconfig
1361         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1362         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1363         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1364                 > $(obj)board/avnet/fx12mm/config.tmp
1365         @echo "TEXT_BASE := 0xFFCB0000" \
1366                 >> $(obj)board/avnet/fx12mm/config.tmp
1367         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1368
1369 fx12mm_config: unconfig
1370         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1371         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1372         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1373                 > $(obj)board/avnet/fx12mm/config.tmp
1374         @echo "TEXT_BASE := 0x03000000" \
1375                 >> $(obj)board/avnet/fx12mm/config.tmp
1376         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1377
1378 G2000_config:   unconfig
1379         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1380
1381 gdppc440etx_config:     unconfig
1382         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1383
1384 hcu4_config:    unconfig
1385         @mkdir -p $(obj)board/netstal/common
1386         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1387
1388 hcu5_config:    unconfig
1389         @mkdir -p $(obj)board/netstal/common
1390         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1391
1392 HH405_config:   unconfig
1393         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1394
1395 HUB405_config:  unconfig
1396         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1397
1398 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1399 intip_config \
1400 devconcenter_config:    unconfig
1401         @mkdir -p $(obj)include
1402         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1403                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1404         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1405
1406 JSE_config:     unconfig
1407         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1408
1409 KAREF_config: unconfig
1410         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1411
1412 katmai_config:  unconfig
1413         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1414
1415 # Kilauea & Haleakala images are identical (recognized via PVR)
1416 kilauea_config \
1417 haleakala_config: unconfig
1418         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1419
1420 kilauea_nand_config \
1421 haleakala_nand_config: unconfig
1422         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1423         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1424         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1425         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1426         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1427         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1428
1429 korat_config:   unconfig
1430         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1431
1432 luan_config:    unconfig
1433         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1434
1435 lwmon5_config:  unconfig
1436         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1437
1438 makalu_config:  unconfig
1439         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1440
1441 mcu25_config:  unconfig
1442         @mkdir -p $(obj)board/netstal/common
1443         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1444
1445 METROBOX_config: unconfig
1446         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1447
1448 MIP405_config:  unconfig
1449         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1450
1451 MIP405T_config: unconfig
1452         @mkdir -p $(obj)include
1453         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1454         @$(XECHO) "Enable subset config for MIP405T"
1455         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1456
1457 ML2_config:     unconfig
1458         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1459
1460 ml300_config:   unconfig
1461         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1462
1463 ml507_flash_config: unconfig
1464         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1465         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1466         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1467                 > $(obj)board/xilinx/ml507/config.tmp
1468         @echo "TEXT_BASE := 0xFE360000" \
1469                 >> $(obj)board/xilinx/ml507/config.tmp
1470         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1471
1472 ml507_config: unconfig
1473         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1474         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1475         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1476                 > $(obj)board/xilinx/ml507/config.tmp
1477         @echo "TEXT_BASE := 0x04000000"  \
1478                 >> $(obj)board/xilinx/ml507/config.tmp
1479         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1480
1481 neo_config:     unconfig
1482         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1483
1484 ocotea_config:  unconfig
1485         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1486
1487 OCRTC_config            \
1488 ORSG_config:    unconfig
1489         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1490
1491 p3p440_config:  unconfig
1492         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1493
1494 PCI405_config:  unconfig
1495         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1496
1497 pcs440ep_config:        unconfig
1498         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1499
1500 PIP405_config:  unconfig
1501         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1502
1503 PLU405_config:  unconfig
1504         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1505
1506 PMC405_config:  unconfig
1507         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1508
1509 PMC405DE_config:        unconfig
1510         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1511
1512 PMC440_config:  unconfig
1513         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1514
1515 PPChameleonEVB_config           \
1516 PPChameleonEVB_BA_25_config     \
1517 PPChameleonEVB_ME_25_config     \
1518 PPChameleonEVB_HI_25_config     \
1519 PPChameleonEVB_BA_33_config     \
1520 PPChameleonEVB_ME_33_config     \
1521 PPChameleonEVB_HI_33_config:    unconfig
1522         @mkdir -p $(obj)include
1523         @[ -z "$(findstring EVB_BA,$@)" ] || \
1524                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1525                   $(XECHO) "... BASIC model" ; \
1526                 }
1527         @[ -z "$(findstring EVB_ME,$@)" ] || \
1528                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1529                   $(XECHO) "... MEDIUM model" ; \
1530                 }
1531         @[ -z "$(findstring EVB_HI,$@)" ] || \
1532                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1533                   $(XECHO) "... HIGH-END model" ; \
1534                 }
1535         @[ -z "$(findstring _25,$@)" ] || \
1536                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1537                   $(XECHO) "SysClk = 25MHz" ; \
1538                 }
1539         @[ -z "$(findstring _33,$@)" ] || \
1540                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1541                   $(XECHO) "SysClk = 33MHz" ; \
1542                 }
1543         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1544
1545 quad100hd_config:       unconfig
1546         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1547
1548 redwood_config: unconfig
1549         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1550
1551 sbc405_config:  unconfig
1552         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1553
1554 sc3_config:unconfig
1555         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1556
1557 sequoia_config \
1558 rainier_config: unconfig
1559         @mkdir -p $(obj)include
1560         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1561                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1562         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1563
1564 sequoia_nand_config \
1565 rainier_nand_config: unconfig
1566         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1567         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1568         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1569         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1570                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1571         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1572         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1573         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1574
1575 sequoia_ramboot_config \
1576 rainier_ramboot_config: unconfig
1577         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1578         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1579         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1580                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1581         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1582         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1583         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1584                 $(obj)board/amcc/sequoia/config.tmp
1585
1586 taihu_config:   unconfig
1587         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1588
1589 taishan_config: unconfig
1590         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1591
1592 v5fx30teval_config: unconfig
1593         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1594         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1595         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1596                 > $(obj)board/avnet/v5fx30teval/config.tmp
1597         @echo "TEXT_BASE := 0x03000000" \
1598                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1599         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1600
1601 v5fx30teval_flash_config: unconfig
1602         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1603         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1604         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1605                 > $(obj)board/avnet/v5fx30teval/config.tmp
1606         @echo "TEXT_BASE := 0xFF1C0000" \
1607                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1608         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1609
1610 VOH405_config:  unconfig
1611         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1612
1613 VOM405_config:  unconfig
1614         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1615
1616 W7OLMC_config   \
1617 W7OLMG_config: unconfig
1618         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1619
1620 # Walnut & Sycamore images are identical (recognized via PVR)
1621 walnut_config \
1622 sycamore_config: unconfig
1623         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1624
1625 WUH405_config:  unconfig
1626         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1627
1628 xilinx-ppc405-generic_flash_config: unconfig
1629         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1630         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1631                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1632         @echo "TEXT_BASE := 0xFE360000" \
1633                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1634         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1635
1636 xilinx-ppc405-generic_config: unconfig
1637         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1638         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1639                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1640         @echo "TEXT_BASE := 0x04000000" \
1641                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1642         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1643
1644 xilinx-ppc440-generic_flash_config: unconfig
1645         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1646         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1647                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1648         @echo "TEXT_BASE := 0xFE360000" \
1649                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1650         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1651
1652 xilinx-ppc440-generic_config: unconfig
1653         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1654         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1655                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1656         @echo "TEXT_BASE := 0x04000000" \
1657                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1658         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1659
1660 XPEDITE1000_config:     unconfig
1661         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1662
1663 yosemite_config \
1664 yellowstone_config: unconfig
1665         @mkdir -p $(obj)include
1666         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1667                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1668         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1669
1670 yucca_config:   unconfig
1671         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1672
1673 zeus_config:    unconfig
1674         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1675
1676 #########################################################################
1677 ## MPC8220 Systems
1678 #########################################################################
1679
1680 Alaska8220_config       \
1681 Yukon8220_config:       unconfig
1682         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1683
1684 sorcery_config:         unconfig
1685         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1686
1687 #########################################################################
1688 ## MPC824x Systems
1689 #########################################################################
1690 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1691
1692 A3000_config: unconfig
1693         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1694
1695 barco_config: unconfig
1696         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1697
1698 BMW_config: unconfig
1699         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1700
1701 CPC45_config    \
1702 CPC45_ROMBOOT_config:   unconfig
1703         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1704         @cd $(obj)include ;                             \
1705         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1706                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1707                 $(XECHO) "... booting from 8-bit flash" ; \
1708         else \
1709                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1710                 $(XECHO) "... booting from 64-bit flash" ; \
1711         fi; \
1712         echo "export CONFIG_BOOT_ROM" >> config.mk;
1713
1714 CU824_config: unconfig
1715         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1716
1717 debris_config: unconfig
1718         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1719
1720 eXalion_config: unconfig
1721         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1722
1723 HIDDEN_DRAGON_config: unconfig
1724         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1725
1726 kvme080_config: unconfig
1727         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1728
1729 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1730 # time permits.
1731 #linkstation_HDLAN_config \
1732 # Remove this line when HDLAN is fixed
1733 linkstation_HGLAN_config: unconfig
1734         @mkdir -p $(obj)include
1735         @case $@ in \
1736                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1737                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1738         esac
1739         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1740
1741 MOUSSE_config: unconfig
1742         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1743
1744 MUSENKI_config: unconfig
1745         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1746
1747 MVBLUE_config:  unconfig
1748         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1749
1750 OXC_config: unconfig
1751         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1752
1753 PN62_config: unconfig
1754         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1755
1756 Sandpoint8240_config: unconfig
1757         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1758
1759 Sandpoint8245_config: unconfig
1760         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1761
1762 sbc8240_config: unconfig
1763         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1764
1765 SL8245_config: unconfig
1766         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1767
1768 utx8245_config: unconfig
1769         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1770
1771 #########################################################################
1772 ## MPC8260 Systems
1773 #########################################################################
1774
1775 atc_config:     unconfig
1776         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1777
1778 cogent_mpc8260_config:  unconfig
1779         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1780
1781 CPU86_config    \
1782 CPU86_ROMBOOT_config: unconfig
1783         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1784         @cd $(obj)include ;                             \
1785         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1786                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1787                 $(XECHO) "... booting from 8-bit flash" ; \
1788         else \
1789                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1790                 $(XECHO) "... booting from 64-bit flash" ; \
1791         fi; \
1792         echo "export CONFIG_BOOT_ROM" >> config.mk;
1793
1794 CPU87_config    \
1795 CPU87_ROMBOOT_config: unconfig
1796         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1797         @cd $(obj)include ;                             \
1798         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1799                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1800                 $(XECHO) "... booting from 8-bit flash" ; \
1801         else \
1802                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1803                 $(XECHO) "... booting from 64-bit flash" ; \
1804         fi; \
1805         echo "export CONFIG_BOOT_ROM" >> config.mk;
1806
1807 ep8248_config   \
1808 ep8248E_config  :       unconfig
1809         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1810
1811 ep8260_config:  unconfig
1812         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1813
1814 ep82xxm_config: unconfig
1815         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1816
1817 gw8260_config:  unconfig
1818         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1819
1820 hymod_config:   unconfig
1821         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1822
1823 IDS8247_config: unconfig
1824         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1825
1826 IPHASE4539_config:      unconfig
1827         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1828
1829 ISPAN_config            \
1830 ISPAN_REVB_config:      unconfig
1831         @mkdir -p $(obj)include
1832         @if [ "$(findstring _REVB_,$@)" ] ; then \
1833                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1834         fi
1835         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1836
1837 mgcoge_config   :       unconfig
1838         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1839
1840 MPC8260ADS_config       \
1841 MPC8260ADS_lowboot_config       \
1842 MPC8260ADS_33MHz_config \
1843 MPC8260ADS_33MHz_lowboot_config \
1844 MPC8260ADS_40MHz_config \
1845 MPC8260ADS_40MHz_lowboot_config \
1846 MPC8272ADS_config       \
1847 MPC8272ADS_lowboot_config       \
1848 PQ2FADS_config          \
1849 PQ2FADS_lowboot_config          \
1850 PQ2FADS-VR_config       \
1851 PQ2FADS-VR_lowboot_config       \
1852 PQ2FADS-ZU_config       \
1853 PQ2FADS-ZU_lowboot_config       \
1854 PQ2FADS-ZU_66MHz_config \
1855 PQ2FADS-ZU_66MHz_lowboot_config \
1856         :               unconfig
1857         @mkdir -p $(obj)include
1858         @mkdir -p $(obj)board/freescale/mpc8260ads
1859         $(if $(findstring PQ2FADS,$@), \
1860         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1861         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1862         $(if $(findstring MHz,$@), \
1863         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1864         $(if $(findstring VR,$@), \
1865         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1866         @[ -z "$(findstring lowboot_,$@)" ] || \
1867                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1868                   $(XECHO) "... with lowboot configuration" ; \
1869                 }
1870         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1871
1872 MPC8266ADS_config:      unconfig
1873         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1874
1875 muas3001_dev_config \
1876 muas3001_config :       unconfig
1877         @mkdir -p $(obj)include
1878         @mkdir -p $(obj)board/muas3001
1879         @if [ "$(findstring dev,$@)" ] ; then \
1880                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1881         fi
1882         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1883
1884 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1885 PM825_config    \
1886 PM825_ROMBOOT_config    \
1887 PM825_BIGFLASH_config   \
1888 PM825_ROMBOOT_BIGFLASH_config   \
1889 PM826_config    \
1890 PM826_ROMBOOT_config    \
1891 PM826_BIGFLASH_config   \
1892 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1893         @mkdir -p $(obj)include
1894         @mkdir -p $(obj)board/pm826
1895         @if [ "$(findstring PM825_,$@)" ] ; then \
1896                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1897         else \
1898                 >$(obj)include/config.h ; \
1899         fi
1900         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1901                 $(XECHO) "... booting from 8-bit flash" ; \
1902                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1903                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1904                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1905                         $(XECHO) "... with 32 MB Flash" ; \
1906                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1907                 fi; \
1908         else \
1909                 $(XECHO) "... booting from 64-bit flash" ; \
1910                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1911                         $(XECHO) "... with 32 MB Flash" ; \
1912                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1913                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1914                 else \
1915                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1916                 fi; \
1917         fi
1918         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1919
1920 PM828_config    \
1921 PM828_PCI_config        \
1922 PM828_ROMBOOT_config    \
1923 PM828_ROMBOOT_PCI_config:       unconfig
1924         @mkdir -p $(obj)include
1925         @mkdir -p $(obj)board/pm826
1926         @if [ "$(findstring _PCI_,$@)" ] ; then \
1927                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1928                 $(XECHO) "... with PCI enabled" ; \
1929         fi
1930         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1931                 $(XECHO) "... booting from 8-bit flash" ; \
1932                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1933                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1934         fi
1935         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1936
1937 ppmc8260_config:        unconfig
1938         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1939
1940 Rattler8248_config      \
1941 Rattler_config:         unconfig
1942         @mkdir -p $(obj)include
1943         $(if $(findstring 8248,$@), \
1944         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1945         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1946
1947 RPXsuper_config:        unconfig
1948         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1949
1950 rsdproto_config:        unconfig
1951         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1952
1953 sacsng_config:  unconfig
1954         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1955
1956 sbc8260_config: unconfig
1957         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1958
1959 SCM_config:             unconfig
1960         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1961
1962 TQM8255_AA_config \
1963 TQM8260_AA_config \
1964 TQM8260_AB_config \
1965 TQM8260_AC_config \
1966 TQM8260_AD_config \
1967 TQM8260_AE_config \
1968 TQM8260_AF_config \
1969 TQM8260_AG_config \
1970 TQM8260_AH_config \
1971 TQM8260_AI_config \
1972 TQM8265_AA_config:  unconfig
1973         @mkdir -p $(obj)include
1974         @case "$@" in \
1975         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1976         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1977         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1978         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1979         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1980         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1981         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1982         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1983         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1984         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1985         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1986         esac; \
1987         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1988                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1989         fi; \
1990         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1991         echo "... with $${CFREQ}MHz system clock" ; \
1992         if [ "$${CACHE}" = "yes" ] ; then \
1993                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1994                 $(XECHO) "... with L2 Cache support" ; \
1995         else \
1996                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1997                 $(XECHO) "... without L2 Cache support" ; \
1998         fi; \
1999         if [ "$${BMODE}" = "60x" ] ; then \
2000                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
2001                 $(XECHO) "... with 60x Bus Mode" ; \
2002         else \
2003                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
2004                 $(XECHO) "... without 60x Bus Mode" ; \
2005         fi
2006         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
2007
2008 TQM8272_config: unconfig
2009         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
2010
2011 VoVPN-GW_66MHz_config   \
2012 VoVPN-GW_100MHz_config:         unconfig
2013         @mkdir -p $(obj)include
2014         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
2015         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
2016
2017 ZPC1900_config: unconfig
2018         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
2019
2020 #########################################################################
2021 ## Coldfire
2022 #########################################################################
2023
2024 M5208EVBE_config :              unconfig
2025         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
2026
2027 M52277EVB_config \
2028 M52277EVB_spansion_config \
2029 M52277EVB_stmicro_config :      unconfig
2030         @case "$@" in \
2031         M52277EVB_config)               FLASH=SPANSION;; \
2032         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2033         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2034         esac; \
2035         if [ "$${FLASH}" = "SPANSION" ] ; then \
2036                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2037                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2038                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2039                 $(XECHO) "... with SPANSION boot..." ; \
2040         fi; \
2041         if [ "$${FLASH}" = "STMICRO" ] ; then \
2042                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2043                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2044                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2045                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2046                 $(XECHO) "... with ST Micro boot..." ; \
2047         fi
2048         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2049
2050 M5235EVB_config \
2051 M5235EVB_Flash16_config \
2052 M5235EVB_Flash32_config:        unconfig
2053         @case "$@" in \
2054         M5235EVB_config)                FLASH=16;; \
2055         M5235EVB_Flash16_config)        FLASH=16;; \
2056         M5235EVB_Flash32_config)        FLASH=32;; \
2057         esac; \
2058         if [ "$${FLASH}" != "16" ] ; then \
2059                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2060                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2061                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2062         else \
2063                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2064                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2065         fi
2066         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2067
2068 M5249EVB_config :               unconfig
2069         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2070
2071 M5253DEMO_config :              unconfig
2072         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2073
2074 M5253EVBE_config :              unconfig
2075         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2076
2077 cobra5272_config :              unconfig
2078         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2079
2080 EB+MCF-EV123_config :           unconfig
2081         @mkdir -p $(obj)include
2082         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2083         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2084         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2085
2086 EB+MCF-EV123_internal_config :  unconfig
2087         @mkdir -p $(obj)include
2088         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2089         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2090         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2091
2092 idmr_config :                   unconfig
2093         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2094
2095 M5271EVB_config :               unconfig
2096         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2097
2098 M5272C3_config :                unconfig
2099         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2100
2101 M5275EVB_config :               unconfig
2102         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2103
2104 M5282EVB_config :               unconfig
2105         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2106
2107 M53017EVB_config :              unconfig
2108         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2109
2110 M5329AFEE_config \
2111 M5329BFEE_config :      unconfig
2112         @case "$@" in \
2113         M5329AFEE_config)       NAND=0;; \
2114         M5329BFEE_config)       NAND=16;; \
2115         esac; \
2116         if [ "$${NAND}" != "0" ] ; then \
2117                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2118         fi
2119         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2120
2121 M5373EVB_config :       unconfig
2122         @case "$@" in \
2123         M5373EVB_config)        NAND=16;; \
2124         esac; \
2125         if [ "$${NAND}" != "0" ] ; then \
2126                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2127         fi
2128         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2129
2130 M54451EVB_config \
2131 M54451EVB_stmicro_config :      unconfig
2132         @case "$@" in \
2133         M54451EVB_config)               FLASH=NOR;; \
2134         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2135         esac; \
2136         if [ "$${FLASH}" = "NOR" ] ; then \
2137                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2138                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2139                 $(XECHO) "... with NOR boot..." ; \
2140         fi; \
2141         if [ "$${FLASH}" = "STMICRO" ] ; then \
2142                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2143                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2144                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2145                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2146                 $(XECHO) "... with ST Micro boot..." ; \
2147         fi; \
2148         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2149         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2150
2151 M54455EVB_config \
2152 M54455EVB_atmel_config \
2153 M54455EVB_intel_config \
2154 M54455EVB_a33_config \
2155 M54455EVB_a66_config \
2156 M54455EVB_i33_config \
2157 M54455EVB_i66_config \
2158 M54455EVB_stm33_config :        unconfig
2159         @case "$@" in \
2160         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2161         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2162         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2163         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2164         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2165         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2166         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2167         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2168         esac; \
2169         if [ "$${FLASH}" = "INTEL" ] ; then \
2170                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2171                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2172                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2173                 $(XECHO) "... with INTEL boot..." ; \
2174         fi; \
2175         if [ "$${FLASH}" = "ATMEL" ] ; then \
2176                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2177                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2178                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2179                 $(XECHO) "... with ATMEL boot..." ; \
2180         fi; \
2181         if [ "$${FLASH}" = "STMICRO" ] ; then \
2182                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2183                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2184                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2185                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2186                 $(XECHO) "... with ST Micro boot..." ; \
2187         fi; \
2188         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2189         $(XECHO) "... with $${FREQ}Hz input clock"
2190         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2191
2192 M5475AFE_config \
2193 M5475BFE_config \
2194 M5475CFE_config \
2195 M5475DFE_config \
2196 M5475EFE_config \
2197 M5475FFE_config \
2198 M5475GFE_config :       unconfig
2199         @case "$@" in \
2200         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2201         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2202         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2203         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2204         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2205         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2206         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2207         esac; \
2208         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2209         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2210         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2211         if [ "$${RAM1}" != "0" ] ; then \
2212                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2213         fi; \
2214         if [ "$${CODE}" != "0" ] ; then \
2215                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2216         fi; \
2217         if [ "$${VID}" == "1" ] ; then \
2218                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2219         fi; \
2220         if [ "$${USB}" == "1" ] ; then \
2221                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2222         fi
2223         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2224
2225 M5485AFE_config \
2226 M5485BFE_config \
2227 M5485CFE_config \
2228 M5485DFE_config \
2229 M5485EFE_config \
2230 M5485FFE_config \
2231 M5485GFE_config \
2232 M5485HFE_config :       unconfig
2233         @case "$@" in \
2234         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2235         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2236         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2237         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2238         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2239         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2240         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2241         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2242         esac; \
2243         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2244         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2245         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2246         if [ "$${RAM1}" != "0" ] ; then \
2247                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2248         fi; \
2249         if [ "$${CODE}" != "0" ] ; then \
2250                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2251         fi; \
2252         if [ "$${VID}" == "1" ] ; then \
2253                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2254         fi; \
2255         if [ "$${USB}" == "1" ] ; then \
2256                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2257         fi
2258         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2259
2260 TASREG_config :         unconfig
2261         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2262
2263 #########################################################################
2264 ## MPC83xx Systems
2265 #########################################################################
2266
2267 kmeter1_config: unconfig
2268         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2269
2270 MPC8313ERDB_33_config \
2271 MPC8313ERDB_66_config \
2272 MPC8313ERDB_NAND_33_config \
2273 MPC8313ERDB_NAND_66_config: unconfig
2274         @mkdir -p $(obj)include
2275         @mkdir -p $(obj)board/freescale/mpc8313erdb
2276         @if [ "$(findstring _33_,$@)" ] ; then \
2277                 $(XECHO) -n "...33M ..." ; \
2278                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2279         fi ; \
2280         if [ "$(findstring _66_,$@)" ] ; then \
2281                 $(XECHO) -n "...66M..." ; \
2282                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2283         fi ; \
2284         if [ "$(findstring _NAND_,$@)" ] ; then \
2285                 $(XECHO) -n "...NAND..." ; \
2286                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2287                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2288         fi ;
2289         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2290         @if [ "$(findstring _NAND_,$@)" ] ; then \
2291                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2292         fi ;
2293
2294 MPC8315ERDB_config: unconfig
2295         @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2296
2297 MPC8323ERDB_config:     unconfig
2298         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2299
2300 MPC832XEMDS_config \
2301 MPC832XEMDS_HOST_33_config \
2302 MPC832XEMDS_HOST_66_config \
2303 MPC832XEMDS_SLAVE_config \
2304 MPC832XEMDS_ATM_config: unconfig
2305         @mkdir -p $(obj)include
2306         @if [ "$(findstring _HOST_,$@)" ] ; then \
2307                 $(XECHO) -n "... PCI HOST " ; \
2308                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2309         fi ; \
2310         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2311                 $(XECHO) "...PCI SLAVE 66M"  ; \
2312                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2313                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2314         fi ; \
2315         if [ "$(findstring _33_,$@)" ] ; then \
2316                 $(XECHO) -n "...33M ..." ; \
2317                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2318                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2319         fi ; \
2320         if [ "$(findstring _66_,$@)" ] ; then \
2321                 $(XECHO) -n "...66M..." ; \
2322                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2323                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2324         fi ; \
2325         if [ "$(findstring _ATM_,$@)" ] ; then \
2326                 $(XECHO) -n "...ATM..." ; \
2327                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2328                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2329         fi ;
2330         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2331
2332 MPC8349EMDS_config:     unconfig
2333         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2334
2335 MPC8349ITX_config \
2336 MPC8349ITX_LOWBOOT_config \
2337 MPC8349ITXGP_config:    unconfig
2338         @mkdir -p $(obj)include
2339         @mkdir -p $(obj)board/freescale/mpc8349itx
2340         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2341         @if [ "$(findstring GP,$@)" ] ; then \
2342                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2343         fi
2344         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2345                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2346         fi
2347         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2348
2349 MPC8360EMDS_config \
2350 MPC8360EMDS_HOST_33_config \
2351 MPC8360EMDS_HOST_66_config \
2352 MPC8360EMDS_SLAVE_config \
2353 MPC8360EMDS_ATM_config: unconfig
2354         @mkdir -p $(obj)include
2355         @if [ "$(findstring _HOST_,$@)" ] ; then \
2356                 $(XECHO) -n "... PCI HOST " ; \
2357                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2358         fi ; \
2359         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2360                 $(XECHO) "...PCI SLAVE 66M"  ; \
2361                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2362                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2363         fi ; \
2364         if [ "$(findstring _33_,$@)" ] ; then \
2365                 $(XECHO) -n "...33M ..." ; \
2366                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2367                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2368         fi ; \
2369         if [ "$(findstring _66_,$@)" ] ; then \
2370                 $(XECHO) -n "...66M..." ; \
2371                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2372                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2373         fi ; \
2374         if [ "$(findstring _ATM_,$@)" ] ; then \
2375                 $(XECHO) -n "...ATM..." ; \
2376                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2377                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2378         fi ;
2379         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2380
2381 MPC8360ERDK_33_config \
2382 MPC8360ERDK_66_config \
2383 MPC8360ERDK_config:     unconfig
2384         @mkdir -p $(obj)include
2385         @if [ "$(findstring _33_,$@)" ] ; then \
2386                 $(XECHO) -n "... CLKIN 33MHz " ; \
2387                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2388         fi ;
2389         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2390
2391 MPC837XEMDS_config \
2392 MPC837XEMDS_HOST_config:        unconfig
2393         @mkdir -p $(obj)include
2394         @if [ "$(findstring _HOST_,$@)" ] ; then \
2395                 $(XECHO) -n "... PCI HOST " ; \
2396                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2397         fi ;
2398         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2399
2400 MPC837XERDB_config:     unconfig
2401         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2402
2403 MVBLM7_config: unconfig
2404         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2405
2406 sbc8349_config \
2407 sbc8349_PCI_33_config \
2408 sbc8349_PCI_66_config: unconfig
2409         @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
2410
2411 SIMPC8313_LP_config \
2412 SIMPC8313_SP_config: unconfig
2413         @mkdir -p $(obj)include
2414         @mkdir -p $(obj)board/sheldon/simpc8313
2415         @if [ "$(findstring _LP_,$@)" ] ; then \
2416                 $(XECHO) -n "...Large Page NAND..." ; \
2417                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2418         fi ; \
2419         if [ "$(findstring _SP_,$@)" ] ; then \
2420                 $(XECHO) -n "...Small Page NAND..." ; \
2421                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2422         fi ;
2423         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2424         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2425
2426 TQM834x_config: unconfig
2427         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2428
2429 vme8349_config:         unconfig
2430         @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
2431
2432 #########################################################################
2433 ## MPC85xx Systems
2434 #########################################################################
2435
2436 ATUM8548_config:        unconfig
2437         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2438
2439 MPC8536DS_NAND_config \
2440 MPC8536DS_SDCARD_config \
2441 MPC8536DS_SPIFLASH_config \
2442 MPC8536DS_36BIT_config \
2443 MPC8536DS_config:       unconfig
2444         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2445
2446 MPC8540ADS_config:      unconfig
2447         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2448
2449 MPC8540EVAL_config \
2450 MPC8540EVAL_33_config \
2451 MPC8540EVAL_66_config \
2452 MPC8540EVAL_33_slave_config \
2453 MPC8540EVAL_66_slave_config:      unconfig
2454         @mkdir -p $(obj)include
2455         @if [ "$(findstring _33_,$@)" ] ; then \
2456                 $(XECHO) "... 33 MHz PCI" ; \
2457         else \
2458                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2459                 $(XECHO) "... 66 MHz PCI" ; \
2460         fi ; \
2461         if [ "$(findstring _slave_,$@)" ] ; then \
2462                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2463                 $(XECHO) " slave" ; \
2464         else \
2465                 $(XECHO) " host" ; \
2466         fi
2467         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2468
2469 MPC8560ADS_config:      unconfig
2470         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2471
2472 MPC8541CDS_legacy_config \
2473 MPC8541CDS_config:      unconfig
2474         @mkdir -p $(obj)include
2475         @if [ "$(findstring _legacy_,$@)" ] ; then \
2476                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2477                 $(XECHO) "... legacy" ; \
2478         fi
2479         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2480
2481 MPC8544DS_config:       unconfig
2482         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2483
2484 MPC8548CDS_legacy_config \
2485 MPC8548CDS_config:      unconfig
2486         @mkdir -p $(obj)include
2487         @if [ "$(findstring _legacy_,$@)" ] ; then \
2488                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2489                 $(XECHO) "... legacy" ; \
2490         fi
2491         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2492
2493 MPC8555CDS_legacy_config \
2494 MPC8555CDS_config:      unconfig
2495         @mkdir -p $(obj)include
2496         @if [ "$(findstring _legacy_,$@)" ] ; then \
2497                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2498                 $(XECHO) "... legacy" ; \
2499         fi
2500         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2501
2502 MPC8568MDS_config:      unconfig
2503         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2504
2505 MPC8569MDS_config:      unconfig
2506         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2507
2508 MPC8572DS_36BIT_config \
2509 MPC8572DS_config:       unconfig
2510         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2511
2512 P2020DS_36BIT_config \
2513 P2020DS_config:         unconfig
2514         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2515
2516 P1011RDB_config \
2517 P1011RDB_NAND_config \
2518 P1011RDB_SDCARD_config \
2519 P1011RDB_SPIFLASH_config \
2520 P1020RDB_config \
2521 P1020RDB_NAND_config \
2522 P1020RDB_SDCARD_config \
2523 P1020RDB_SPIFLASH_config \
2524 P2010RDB_config \
2525 P2010RDB_NAND_config \
2526 P2010RDB_SDCARD_config \
2527 P2010RDB_SPIFLASH_config \
2528 P2020RDB_config \
2529 P2020RDB_NAND_config \
2530 P2020RDB_SDCARD_config \
2531 P2020RDB_SPIFLASH_config:       unconfig
2532         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2533
2534 PM854_config:   unconfig
2535         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2536
2537 PM856_config:   unconfig
2538         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2539
2540 sbc8540_config \
2541 sbc8540_33_config \
2542 sbc8540_66_config:      unconfig
2543         @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
2544
2545 sbc8548_config \
2546 sbc8548_PCI_33_config \
2547 sbc8548_PCI_66_config \
2548 sbc8548_PCI_33_PCIE_config \
2549 sbc8548_PCI_66_PCIE_config: unconfig
2550         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2551
2552 sbc8560_config \
2553 sbc8560_33_config \
2554 sbc8560_66_config:      unconfig
2555         @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
2556
2557 socrates_config:        unconfig
2558         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2559
2560 stxgp3_config:          unconfig
2561         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2562
2563 stxssa_config           \
2564 stxssa_4M_config:       unconfig
2565         @mkdir -p $(obj)include
2566         @if [ "$(findstring _4M_,$@)" ] ; then \
2567                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2568                 $(XECHO) "... with 4 MiB flash memory" ; \
2569         fi
2570         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2571
2572 TQM8540_config          \
2573 TQM8541_config          \
2574 TQM8548_config          \
2575 TQM8548_AG_config       \
2576 TQM8548_BE_config       \
2577 TQM8555_config          \
2578 TQM8560_config:         unconfig
2579         @mkdir -p $(obj)include
2580         @BTYPE=$(@:_config=); \
2581         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2582         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2583         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2584         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2585         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2586         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2587         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2588         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2589
2590 XPEDITE5200_config:     unconfig
2591         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2592
2593 XPEDITE5370_config:     unconfig
2594         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2595
2596 #########################################################################
2597 ## MPC86xx Systems
2598 #########################################################################
2599
2600 MPC8610HPCD_config:     unconfig
2601         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2602
2603 MPC8641HPCN_36BIT_config \
2604 MPC8641HPCN_config:    unconfig
2605         @mkdir -p $(obj)include
2606         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2607                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2608                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2609         fi
2610         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2611
2612 sbc8641d_config:        unconfig
2613         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2614
2615 XPEDITE5170_config:     unconfig
2616         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2617
2618 #########################################################################
2619 ## 74xx/7xx Systems
2620 #########################################################################
2621
2622 AmigaOneG3SE_config:    unconfig
2623         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2624
2625 BAB7xx_config: unconfig
2626         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2627
2628 CPCI750_config: unconfig
2629         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2630
2631 DB64360_config: unconfig
2632         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2633
2634 DB64460_config: unconfig
2635         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2636
2637 ELPPC_config: unconfig
2638         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2639
2640 EVB64260_config \
2641 EVB64260_750CX_config:  unconfig
2642         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2643
2644 mpc7448hpc2_config:  unconfig
2645         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2646
2647 P3G4_config: unconfig
2648         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2649
2650 p3m750_config   \
2651 p3m7448_config:         unconfig
2652         @mkdir -p $(obj)include
2653         @if [ "$(findstring 750_,$@)" ] ; then \
2654                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2655         else \
2656                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2657         fi
2658         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2659
2660 PCIPPC2_config \
2661 PCIPPC6_config: unconfig
2662         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2663
2664 ppmc7xx_config: unconfig
2665         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2666
2667 ZUMA_config:    unconfig
2668         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2669
2670 #========================================================================
2671 # ARM
2672 #========================================================================
2673 #########################################################################
2674 ## StrongARM Systems
2675 #########################################################################
2676
2677 assabet_config  :       unconfig
2678         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2679
2680 dnp1110_config  :       unconfig
2681         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2682
2683 gcplus_config   :       unconfig
2684         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2685
2686 lart_config     :       unconfig
2687         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2688
2689 shannon_config  :       unconfig
2690         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2691
2692 #########################################################################
2693 ## ARM92xT Systems
2694 #########################################################################
2695
2696 #########################################################################
2697 ## Atmel AT91RM9200 Systems
2698 #########################################################################
2699
2700 at91rm9200dk_config     :       unconfig
2701         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2702
2703 at91rm9200ek_config     :       unconfig
2704         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2705
2706 cmc_pu2_config  :       unconfig
2707         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2708
2709 CPUAT91_RAM_config \
2710 CPUAT91_config  :       unconfig
2711         @mkdir -p $(obj)include
2712         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2713         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2714
2715 csb637_config   :       unconfig
2716         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2717
2718 kb9202_config   :       unconfig
2719         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2720
2721 m501sk_config   :       unconfig
2722         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2723
2724 mp2usb_config   :       unconfig
2725         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2726
2727 #########################################################################
2728 ## Atmel ARM926EJ-S Systems
2729 #########################################################################
2730
2731 afeb9260_config:        unconfig
2732         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2733
2734 at91cap9adk_config      :       unconfig
2735         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2736
2737 at91sam9260ek_nandflash_config \
2738 at91sam9260ek_dataflash_cs0_config \
2739 at91sam9260ek_dataflash_cs1_config \
2740 at91sam9260ek_config \
2741 at91sam9g20ek_nandflash_config \
2742 at91sam9g20ek_dataflash_cs0_config \
2743 at91sam9g20ek_dataflash_cs1_config \
2744 at91sam9g20ek_config    :       unconfig
2745         @mkdir -p $(obj)include
2746         @if [ "$(findstring 9g20,$@)" ] ; then \
2747                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2748                 $(XECHO) "... 9G20 Variant" ; \
2749         else \
2750                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2751         fi;
2752         @if [ "$(findstring _nandflash,$@)" ] ; then \
2753                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2754                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2755         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2756                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2757                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2758         else \
2759                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2760                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2761         fi;
2762         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2763
2764 at91sam9xeek_nandflash_config \
2765 at91sam9xeek_dataflash_cs0_config \
2766 at91sam9xeek_dataflash_cs1_config \
2767 at91sam9xeek_config     :       unconfig
2768         @mkdir -p $(obj)include
2769         @if [ "$(findstring _nandflash,$@)" ] ; then \
2770                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2771                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2772         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2773                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2774                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2775         else \
2776                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2777                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2778         fi;
2779         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2780
2781 at91sam9261ek_nandflash_config \
2782 at91sam9261ek_dataflash_cs0_config \
2783 at91sam9261ek_dataflash_cs3_config \
2784 at91sam9261ek_config \
2785 at91sam9g10ek_nandflash_config \
2786 at91sam9g10ek_dataflash_cs0_config \
2787 at91sam9g10ek_dataflash_cs3_config \
2788 at91sam9g10ek_config    :       unconfig
2789         @mkdir -p $(obj)include
2790         @if [ "$(findstring 9g10,$@)" ] ; then \
2791                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2792                 $(XECHO) "... 9G10 Variant" ; \
2793         else \
2794                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2795         fi;
2796         @if [ "$(findstring _nandflash,$@)" ] ; then \
2797                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2798                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2799         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2800                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2801                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2802         else \
2803                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2804                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2805         fi;
2806         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2807
2808 at91sam9263ek_norflash_config \
2809 at91sam9263ek_norflash_boot_config \
2810 at91sam9263ek_nandflash_config \
2811 at91sam9263ek_dataflash_config \
2812 at91sam9263ek_dataflash_cs0_config \
2813 at91sam9263ek_config    :       unconfig
2814         @mkdir -p $(obj)include
2815         @if [ "$(findstring _nandflash,$@)" ] ; then \
2816                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2817                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2818         elif [ "$(findstring norflash,$@)" ] ; then \
2819                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2820                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2821         else \
2822                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2823                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2824         fi;
2825         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2826                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2827                 $(XECHO) "... and boot from NOR FLASH" ; \
2828         fi;
2829         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2830
2831 at91sam9rlek_nandflash_config \
2832 at91sam9rlek_dataflash_config \
2833 at91sam9rlek_dataflash_cs0_config \
2834 at91sam9rlek_config     :       unconfig
2835         @mkdir -p $(obj)include
2836         @if [ "$(findstring _nandflash,$@)" ] ; then \
2837                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2838                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2839         else \
2840                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2841                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2842         fi;
2843         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2844
2845 CPU9G20_128M_config \
2846 CPU9G20_config \
2847 CPU9260_128M_config \
2848 CPU9260_config  :       unconfig
2849         @mkdir -p $(obj)include
2850         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2851         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2852
2853 meesc_config    :       unconfig
2854         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2855
2856 pm9261_config   :       unconfig
2857         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2858
2859 at91sam9m10g45ek_nandflash_config \
2860 at91sam9m10g45ek_dataflash_config \
2861 at91sam9m10g45ek_dataflash_cs0_config \
2862 at91sam9m10g45ek_config \
2863 at91sam9g45ekes_nandflash_config \
2864 at91sam9g45ekes_dataflash_config \
2865 at91sam9g45ekes_dataflash_cs0_config \
2866 at91sam9g45ekes_config  :       unconfig
2867         @mkdir -p $(obj)include
2868                 @if [ "$(findstring 9m10,$@)" ] ; then \
2869                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2870                 $(XECHO) "... 9M10G45 Variant" ; \
2871         else \
2872                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2873         fi;
2874
2875         @if [ "$(findstring _nandflash,$@)" ] ; then \
2876                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2877                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2878         else \
2879                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2880                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2881         fi;
2882         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2883
2884 pm9263_config   :       unconfig
2885         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2886
2887 SBC35_A9G20_NANDFLASH_config \
2888 SBC35_A9G20_EEPROM_config \
2889 SBC35_A9G20_config      :       unconfig
2890         @mkdir -p $(obj)include
2891         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2892         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2893
2894 TNY_A9G20_NANDFLASH_config \
2895 TNY_A9G20_EEPROM_config \
2896 TNY_A9G20_config \
2897 TNY_A9260_NANDFLASH_config \
2898 TNY_A9260_EEPROM_config \
2899 TNY_A9260_config        :       unconfig
2900         @mkdir -p $(obj)include
2901         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2902         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2903
2904 ########################################################################
2905 ## ARM Integrator boards - see doc/README-integrator for more info.
2906 integratorap_config     \
2907 ap_config               \
2908 ap966_config            \
2909 ap922_config            \
2910 ap922_XA10_config       \
2911 ap7_config              \
2912 ap720t_config           \
2913 ap920t_config           \
2914 ap926ejs_config         \
2915 ap946es_config: unconfig
2916         @board/armltd/integrator/split_by_variant.sh ap $@
2917
2918 integratorcp_config     \
2919 cp_config               \
2920 cp920t_config           \
2921 cp926ejs_config         \
2922 cp946es_config          \
2923 cp1136_config           \
2924 cp966_config            \
2925 cp922_config            \
2926 cp922_XA10_config       \
2927 cp1026_config: unconfig
2928         @board/armltd/integrator/split_by_variant.sh cp $@
2929
2930 davinci_dvevm_config :  unconfig
2931         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2932
2933 davinci_schmoogie_config :      unconfig
2934         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2935
2936 davinci_sffsdr_config : unconfig
2937         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2938
2939 davinci_sonata_config : unconfig
2940         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2941
2942 davinci_dm355evm_config :       unconfig
2943         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2944
2945 davinci_dm355leopard_config :   unconfig
2946         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2947
2948 davinci_dm365evm_config :       unconfig
2949         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2950
2951 davinci_dm6467evm_config :      unconfig
2952         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2953
2954 imx27lite_config:       unconfig
2955         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2956
2957 lpd7a400_config \
2958 lpd7a404_config:        unconfig
2959         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2960
2961 mv88f6281gtw_ge_config: unconfig
2962         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2963
2964 mx1ads_config   :       unconfig
2965         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2966
2967 mx1fs2_config   :       unconfig
2968         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2969
2970 netstar_config:         unconfig
2971         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2972
2973 nhk8815_config \
2974 nhk8815_onenand_config: unconfig
2975         @mkdir -p $(obj)include
2976         @ > $(obj)include/config.h
2977         @if [ "$(findstring _onenand, $@)" ] ; then \
2978                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2979                 $(XECHO) "... configured to boot from OneNand Flash"; \
2980         else \
2981                 $(XECHO) "... configured to boot from Nand Flash"; \
2982         fi
2983         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2984
2985 omap1510inn_config :    unconfig
2986         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2987
2988 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2989
2990 omap1610inn_config \
2991 omap1610inn_cs0boot_config \
2992 omap1610inn_cs3boot_config \
2993 omap1610inn_cs_autoboot_config \
2994 omap1610h2_config \
2995 omap1610h2_cs0boot_config \
2996 omap1610h2_cs3boot_config \
2997 omap1610h2_cs_autoboot_config:  unconfig
2998         @mkdir -p $(obj)include
2999         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3000                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
3001                 $(XECHO) "... configured for CS0 boot"; \
3002         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
3003                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
3004                 $(XECHO) "... configured for CS_AUTO boot"; \
3005         else \
3006                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3007                 $(XECHO) "... configured for CS3 boot"; \
3008         fi;
3009         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
3010
3011 omap5912osk_config :    unconfig
3012         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
3013
3014 openrd_base_config: unconfig
3015         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3016
3017 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3018
3019 omap730p2_config \
3020 omap730p2_cs0boot_config \
3021 omap730p2_cs3boot_config :      unconfig
3022         @mkdir -p $(obj)include
3023         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3024                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3025                 $(XECHO) "... configured for CS0 boot"; \
3026         else \
3027                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3028                 $(XECHO) "... configured for CS3 boot"; \
3029         fi;
3030         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3031
3032 rd6281a_config: unconfig
3033         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3034
3035 sbc2410x_config: unconfig
3036         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3037
3038 scb9328_config  :       unconfig
3039         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3040
3041 sheevaplug_config: unconfig
3042         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3043
3044 smdk2400_config :       unconfig
3045         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3046
3047 smdk2410_config :       unconfig
3048         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3049
3050 SX1_stdout_serial_config \
3051 SX1_config:             unconfig
3052         @mkdir -p $(obj)include
3053         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3054                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3055                 $(XECHO) "... configured for stdout serial"; \
3056         else \
3057                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3058                 $(XECHO) "... configured for stdout usbtty"; \
3059         fi;
3060         @$(MKCONFIG) SX1 arm arm925t sx1
3061
3062 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3063 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3064
3065 trab_config \
3066 trab_bigram_config \
3067 trab_bigflash_config \
3068 trab_old_config:        unconfig
3069         @mkdir -p $(obj)include
3070         @mkdir -p $(obj)board/trab
3071         @[ -z "$(findstring _bigram,$@)" ] || \
3072                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3073                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3074                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3075                 }
3076         @[ -z "$(findstring _bigflash,$@)" ] || \
3077                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3078                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3079                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3080                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3081                 }
3082         @[ -z "$(findstring _old,$@)" ] || \
3083                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3084                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3085                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3086                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3087                 }
3088         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3089
3090 VCMA9_config    :       unconfig
3091         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3092
3093 #########################################################################
3094 # ARM supplied Versatile development boards
3095 #########################################################################
3096
3097 cm4008_config   :       unconfig
3098         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3099
3100 cm41xx_config   :       unconfig
3101         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3102
3103 versatile_config        \
3104 versatileab_config      \
3105 versatilepb_config :    unconfig
3106         @board/armltd/versatile/split_by_variant.sh $@
3107
3108 voiceblue_config:       unconfig
3109         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3110
3111 #########################################################################
3112 ## S3C44B0 Systems
3113 #########################################################################
3114
3115 B2_config       :       unconfig
3116         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3117
3118 #########################################################################
3119 ## ARM720T Systems
3120 #########################################################################
3121
3122 armadillo_config:       unconfig
3123         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3124
3125 ep7312_config   :       unconfig
3126         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3127
3128 impa7_config    :       unconfig
3129         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3130
3131 modnet50_config :       unconfig
3132         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3133
3134 evb4510_config :        unconfig
3135         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3136
3137 lpc2292sodimm_config:   unconfig
3138         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3139
3140 SMN42_config    :       unconfig
3141         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3142
3143 #########################################################################
3144 ## ARM CORTEX Systems
3145 #########################################################################
3146
3147 devkit8000_config :     unconfig
3148         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3149
3150 omap3_beagle_config :   unconfig
3151         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3152
3153 omap3_overo_config :    unconfig
3154         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3155
3156 omap3_evm_config :      unconfig
3157         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3158
3159 omap3_pandora_config :  unconfig
3160         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3161
3162 omap3_sdp3430_config :  unconfig
3163         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3164
3165 omap3_zoom1_config :    unconfig
3166         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3167
3168 omap3_zoom2_config :    unconfig
3169         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3170
3171 smdkc100_config:        unconfig
3172         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3173
3174 #########################################################################
3175 ## XScale Systems
3176 #########################################################################
3177
3178 actux1_config   :       unconfig
3179         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3180
3181 actux2_config   :       unconfig
3182         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3183
3184 actux3_config   :       unconfig
3185         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3186
3187 actux4_config   :       unconfig
3188         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3189
3190 cerf250_config :        unconfig
3191         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3192
3193 cradle_config   :       unconfig
3194         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3195
3196 csb226_config   :       unconfig
3197         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3198
3199 delta_config :  unconfig
3200         @$(MKCONFIG) $(@:_config=) arm pxa delta
3201
3202 innokom_config  :       unconfig
3203         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3204
3205 ixdp425_config  :       unconfig
3206         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3207
3208 ixdpg425_config :       unconfig
3209         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3210
3211 lubbock_config  :       unconfig
3212         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3213
3214 pleb2_config    :       unconfig
3215         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3216
3217 logodl_config   :       unconfig
3218         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3219
3220 pdnb3_config \
3221 scpu_config:    unconfig
3222         @mkdir -p $(obj)include
3223         @if [ "$(findstring scpu_,$@)" ] ; then \
3224                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3225                 $(XECHO) "... on SCPU board variant" ; \
3226         fi
3227         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3228
3229 pxa255_idp_config:      unconfig
3230         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3231
3232 polaris_config \
3233 trizepsiv_config        :       unconfig
3234         @mkdir -p $(obj)include
3235         @if [ "$(findstring polaris,$@)" ] ; then \
3236                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3237         fi;
3238         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3239
3240 wepep250_config :       unconfig
3241         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3242
3243 xaeniax_config  :       unconfig
3244         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3245
3246 xm250_config    :       unconfig
3247         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3248
3249 xsengine_config :       unconfig
3250         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3251
3252 zylonite_config :
3253         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3254
3255 #########################################################################
3256 ## ARM1136 Systems
3257 #########################################################################
3258
3259 apollon_config          : unconfig
3260         @mkdir -p $(obj)include
3261         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3262         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3263         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3264
3265 imx31_litekit_config    : unconfig
3266         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3267
3268 imx31_phycore_eet_config \
3269 imx31_phycore_config    : unconfig
3270         @mkdir -p $(obj)include
3271         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3272                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3273         fi
3274         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3275
3276 mx31ads_config          : unconfig
3277         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3278
3279 mx31pdk_config \
3280 mx31pdk_nand_config     : unconfig
3281         @mkdir -p $(obj)include
3282         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3283                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3284         else                                                                            \
3285                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3286                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3287         fi
3288         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3289
3290 omap2420h4_config       : unconfig
3291         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3292
3293 qong_config             : unconfig
3294         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3295
3296 #########################################################################
3297 ## ARM1176 Systems
3298 #########################################################################
3299 smdk6400_noUSB_config   \
3300 smdk6400_config :       unconfig
3301         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3302         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3303         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3304         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3305                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3306                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3307         else                                                                            \
3308                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3309                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3310         fi
3311         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3312
3313 #========================================================================
3314 # i386
3315 #========================================================================
3316 #########################################################################
3317 ## AMD SC520 CDP
3318 #########################################################################
3319 eNET_config     :       unconfig
3320         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3321
3322 sc520_cdp_config        :       unconfig
3323         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3324
3325 sc520_spunk_config      :       unconfig
3326         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3327
3328 sc520_spunk_rel_config  :       unconfig
3329         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3330
3331 #========================================================================
3332 # MIPS
3333 #========================================================================
3334 #########################################################################
3335 ## MIPS32 4Kc
3336 #########################################################################
3337
3338 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3339
3340 incaip_100MHz_config    \
3341 incaip_133MHz_config    \
3342 incaip_150MHz_config    \
3343 incaip_config: unconfig
3344         @mkdir -p $(obj)include
3345         @[ -z "$(findstring _100MHz,$@)" ] || \
3346                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3347                   $(XECHO) "... with 100MHz system clock" ; \
3348                 }
3349         @[ -z "$(findstring _133MHz,$@)" ] || \
3350                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3351                   $(XECHO) "... with 133MHz system clock" ; \
3352                 }
3353         @[ -z "$(findstring _150MHz,$@)" ] || \
3354                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3355                   $(XECHO) "... with 150MHz system clock" ; \
3356                 }
3357         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3358
3359 tb0229_config: unconfig
3360         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3361
3362 vct_premium_config              \
3363 vct_premium_small_config        \
3364 vct_premium_onenand_config      \
3365 vct_premium_onenand_small_config \
3366 vct_platinum_config             \
3367 vct_platinum_small_config       \
3368 vct_platinum_onenand_config     \
3369 vct_platinum_onenand_small_config \
3370 vct_platinumavc_config          \
3371 vct_platinumavc_small_config    \
3372 vct_platinumavc_onenand_config  \
3373 vct_platinumavc_onenand_small_config: unconfig
3374         @mkdir -p $(obj)include
3375         @if [ "$(findstring _premium,$@)" ] ; then \
3376                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3377                 $(XECHO) "... on Premium board variant" ; \
3378         fi
3379         @if [ "$(findstring _platinum_,$@)" ] ; then \
3380                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3381                 $(XECHO) "... on Platinum board variant" ; \
3382         fi
3383         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3384                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3385                 $(XECHO) "... on PlatinumAVC board variant" ; \
3386         fi
3387         @if [ "$(findstring _onenand,$@)" ] ; then \
3388                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3389                 $(XECHO) "... on OneNAND board variant" ; \
3390         fi
3391         @if [ "$(findstring _small,$@)" ] ; then \
3392                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3393                 $(XECHO) "... stripped down image variant" ; \
3394         fi
3395         @$(MKCONFIG) -a vct mips mips vct micronas
3396
3397 #########################################################################
3398 ## MIPS32 AU1X00
3399 #########################################################################
3400
3401 dbau1000_config         :       unconfig
3402         @mkdir -p $(obj)include
3403         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3404         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3405
3406 dbau1100_config         :       unconfig
3407         @mkdir -p $(obj)include
3408         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3409         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3410
3411 dbau1500_config         :       unconfig
3412         @mkdir -p $(obj)include
3413         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3414         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3415
3416 dbau1550_config         :       unconfig
3417         @mkdir -p $(obj)include
3418         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3419         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3420
3421 dbau1550_el_config      :       unconfig
3422         @mkdir -p $(obj)include
3423         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3424         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3425
3426 gth2_config             :       unconfig
3427         @mkdir -p $(obj)include
3428         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3429         @$(MKCONFIG) -a gth2 mips mips gth2
3430
3431 pb1000_config           :       unconfig
3432         @mkdir -p $(obj)include
3433         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3434         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3435
3436 qemu_mips_config        : unconfig
3437         @mkdir -p $(obj)include
3438         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3439         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3440
3441 #########################################################################
3442 ## MIPS64 5Kc
3443 #########################################################################
3444
3445 purple_config :         unconfig
3446         @$(MKCONFIG) $(@:_config=) mips mips purple
3447
3448 #========================================================================
3449 # Nios
3450 #========================================================================
3451 #########################################################################
3452 ## Nios32
3453 #########################################################################
3454
3455 ADNPESC1_DNPEVA2_base_32_config \
3456 ADNPESC1_base_32_config         \
3457 ADNPESC1_config: unconfig
3458         @mkdir -p $(obj)include
3459         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3460                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3461                   $(XECHO) "... DNP/EVA2 configuration" ; \
3462                 }
3463         @[ -z "$(findstring _base_32,$@)" ] || \
3464                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3465                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3466                 }
3467         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3468                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3469                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3470                 }
3471         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3472
3473 DK1C20_safe_32_config           \
3474 DK1C20_standard_32_config       \
3475 DK1C20_config:  unconfig
3476         @mkdir -p $(obj)include
3477         @[ -z "$(findstring _safe_32,$@)" ] || \
3478                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3479                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3480                 }
3481         @[ -z "$(findstring _standard_32,$@)" ] || \
3482                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3483                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3484                 }
3485         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3486                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3487                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3488                 }
3489         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3490
3491 DK1S10_safe_32_config           \
3492 DK1S10_standard_32_config       \
3493 DK1S10_mtx_ldk_20_config        \
3494 DK1S10_config:  unconfig
3495         @mkdir -p $(obj)include
3496         @[ -z "$(findstring _safe_32,$@)" ] || \
3497                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3498                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3499                 }
3500         @[ -z "$(findstring _standard_32,$@)" ] || \
3501                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3502                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3503                 }
3504         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3505                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3506                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3507                 }
3508         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3509                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3510                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3511                 }
3512         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3513
3514 #########################################################################
3515 ## Nios-II
3516 #########################################################################
3517
3518 EP1C20_config : unconfig
3519         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3520
3521 EP1S10_config : unconfig
3522         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3523
3524 EP1S40_config : unconfig
3525         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3526
3527 PK1C20_config : unconfig
3528         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3529
3530 PCI5441_config : unconfig
3531         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3532
3533 #========================================================================
3534 ## Microblaze
3535 #========================================================================
3536
3537 microblaze-generic_config:      unconfig
3538         @mkdir -p $(obj)include
3539         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3540
3541 #========================================================================
3542 # Blackfin
3543 #========================================================================
3544
3545 # Analog Devices boards
3546 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3547         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3548
3549 # Bluetechnix tinyboards
3550 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 tcm-bf537
3551
3552 # Misc third party boards
3553 BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp
3554
3555 # I-SYST Micromodule
3556 BFIN_BOARDS += ibf-dsp561
3557
3558 $(BFIN_BOARDS:%=%_config)       : unconfig
3559         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3560
3561 #========================================================================
3562 # AVR32
3563 #========================================================================
3564
3565 atngw100_config :       unconfig
3566         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3567
3568 atstk1002_config        :       unconfig
3569         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3570
3571 atstk1003_config        :       unconfig
3572         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3573
3574 atstk1004_config        :       unconfig
3575         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3576
3577 atstk1006_config        :       unconfig
3578         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3579
3580 favr-32-ezkit_config    :       unconfig
3581         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3582
3583 hammerhead_config       :       unconfig
3584         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3585
3586 mimc200_config          :       unconfig
3587         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3588
3589 #========================================================================
3590 # SH3 (SuperH)
3591 #========================================================================
3592
3593 #########################################################################
3594 ## sh2 (Renesas SuperH)
3595 #########################################################################
3596 rsk7203_config: unconfig
3597         @mkdir -p $(obj)include
3598         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3599         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3600
3601 #########################################################################
3602 ## sh3 (Renesas SuperH)
3603 #########################################################################
3604
3605 mpr2_config: unconfig
3606         @mkdir -p $(obj)include
3607         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3608         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3609
3610 ms7720se_config: unconfig
3611         @mkdir -p $(obj)include
3612         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3613         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3614
3615 #########################################################################
3616 ## sh4 (Renesas SuperH)
3617 #########################################################################
3618
3619 MigoR_config :       unconfig
3620         @mkdir -p $(obj)include
3621         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3622         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3623
3624 ms7750se_config: unconfig
3625         @mkdir -p $(obj)include
3626         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3627         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3628
3629 ms7722se_config :       unconfig
3630         @mkdir -p $(obj)include
3631         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3632         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3633
3634 r2dplus_config  :   unconfig
3635         @mkdir -p $(obj)include
3636         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3637         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3638
3639 r7780mp_config: unconfig
3640         @mkdir -p $(obj)include
3641         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3642         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3643
3644 sh7763rdp_config  :   unconfig
3645         @mkdir -p $(obj)include
3646         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3647         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3648
3649 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3650 sh7785lcr_32bit_config \
3651 sh7785lcr_config  :   unconfig
3652         @mkdir -p $(obj)include
3653         @mkdir -p $(obj)board/renesas/sh7785lcr
3654         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3655         @if [ "$(findstring 32bit, $@)" ] ; then \
3656                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3657                 echo "TEXT_BASE = 0x8ff80000" > \
3658                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3659                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3660         fi
3661         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3662
3663 ap325rxa_config  :   unconfig
3664         @mkdir -p $(obj)include
3665         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3666         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3667
3668 espt_config  :   unconfig
3669         @mkdir -p $(obj)include
3670         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3671         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3672
3673 #========================================================================
3674 # SPARC
3675 #========================================================================
3676
3677 #########################################################################
3678 ## LEON3
3679 #########################################################################
3680
3681 # Gaisler GR-XC3S-1500 board
3682 gr_xc3s_1500_config : unconfig
3683         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3684
3685 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3686 gr_cpci_ax2000_config : unconfig
3687         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3688
3689 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3690 # Development board Stratix II edition, FPGA Device EP2S60.
3691 gr_ep2s60_config: unconfig
3692         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3693
3694 # Gaisler LEON3 GRSIM simulator
3695 grsim_config : unconfig
3696         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3697
3698 #########################################################################
3699 ## LEON2
3700 #########################################################################
3701
3702 # Gaisler LEON2 GRSIM simulator
3703 grsim_leon2_config : unconfig
3704         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3705
3706 #########################################################################
3707 #########################################################################
3708 #########################################################################
3709
3710 clean:
3711         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3712                $(obj)examples/standalone/atmel_df_pow2                    \
3713                $(obj)examples/standalone/eepro100_eeprom                  \
3714                $(obj)examples/standalone/hello_world                      \
3715                $(obj)examples/standalone/interrupt                        \
3716                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3717                $(obj)examples/standalone/sched                            \
3718                $(obj)examples/standalone/smc91111_eeprom                  \
3719                $(obj)examples/standalone/test_burst                       \
3720                $(obj)examples/standalone/timer
3721         @rm -f $(obj)examples/api/demo{,.bin}
3722         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3723                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3724                $(obj)tools/envcrc                                         \
3725                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3726                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3727                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3728                $(obj)tools/ncb             $(obj)tools/ubsha1
3729         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3730                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3731                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3732                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3733                $(obj)lib_blackfin/u-boot.lds                              \
3734                $(obj)u-boot.lds                                           \
3735                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3736         @rm -f $(obj)include/bmp_logo.h
3737         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3738         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3739         @rm -f $(ONENAND_BIN)
3740         @rm -f $(obj)onenand_ipl/u-boot.lds
3741         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3742         @find $(OBJTREE) -type f \
3743                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3744                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3745                 | xargs rm -f
3746
3747 clobber:        clean
3748         @find $(OBJTREE) -type f \( -name .depend \
3749                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3750                 -print0 \
3751                 | xargs -0 rm -f
3752         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3753                 $(obj)cscope.* $(obj)*.*~
3754         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3755         @rm -f $(obj)u-boot.kwb
3756         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3757         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3758         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3759         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3760         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3761
3762 ifeq ($(OBJTREE),$(SRCTREE))
3763 mrproper \
3764 distclean:      clobber unconfig
3765 else
3766 mrproper \
3767 distclean:      clobber unconfig
3768         rm -rf $(obj)*
3769 endif
3770
3771 backup:
3772         F=`basename $(TOPDIR)` ; cd .. ; \
3773         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3774
3775 #########################################################################