Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 08
  26 SUBLEVEL =
  27 EXTRAVERSION =
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 TAG_SUBDIRS += cpu/mpc8xxx
 234 endif
 235 ifeq ($(CPU),mpc86xx)
 236 LIBS += cpu/mpc8xxx/ddr/libddr.a
 237 LIBS += cpu/mpc8xxx/lib8xxx.a
 238 TAG_SUBDIRS += cpu/mpc8xxx
 239 endif
 240 LIBS += drivers/rtc/librtc.a
 241 LIBS += drivers/serial/libserial.a
 242 LIBS += drivers/twserial/libtws.a
 243 LIBS += drivers/usb/gadget/libusb_gadget.a
 244 LIBS += drivers/usb/host/libusb_host.a
 245 LIBS += drivers/usb/musb/libusb_musb.a
 246 LIBS += drivers/video/libvideo.a
 247 LIBS += drivers/watchdog/libwatchdog.a
 248 LIBS += common/libcommon.a
 249 LIBS += libfdt/libfdt.a
 250 LIBS += api/libapi.a
 251 LIBS += post/libpost.a
 252
 253 LIBS := $(addprefix $(obj),$(LIBS))
 254 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 255
 256 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 257 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 258
 259 # Add GCC lib
 260 ifdef USE_PRIVATE_LIBGCC
 261 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 262 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 263 else
 264 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 265 endif
 266 else
 267 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 268 endif
 269 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 270 export PLATFORM_LIBS
 271
 272 # Special flags for CPP when processing the linker script.
 273 # Pass the version down so we can handle backwards compatibility
 274 # on the fly.
 275 LDPPFLAGS += \
 276         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 277         $(shell $(LD) --version | \
 278           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 279
 280 ifeq ($(CONFIG_NAND_U_BOOT),y)
 281 NAND_SPL = nand_spl
 282 U_BOOT_NAND = $(obj)u-boot-nand.bin
 283 endif
 284
 285 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 286 ONENAND_IPL = onenand_ipl
 287 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 288 endif
 289
 290 __OBJS := $(subst $(obj),,$(OBJS))
 291 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 292
 293 #########################################################################
 294 #########################################################################
 295
 296 # Always append ALL so that arch config.mk's can add custom ones
 297 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 298
 299 all:            $(ALL)
 300
 301 $(obj)u-boot.hex:       $(obj)u-boot
 302                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 303
 304 $(obj)u-boot.srec:      $(obj)u-boot
 305                 $(OBJCOPY) -O srec $< $@
 306
 307 $(obj)u-boot.bin:       $(obj)u-boot
 308                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 309
 310 $(obj)u-boot.ldr:       $(obj)u-boot
 311                 $(obj)tools/envcrc --binary > $(obj)env-ldr.o
 312                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 313
 314 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 315                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 316
 317 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 318                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 319
 320 $(obj)u-boot.img:       $(obj)u-boot.bin
 321                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 322                 -a $(TEXT_BASE) -e 0 \
 323                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 324                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 325                 -d $< $@
 326
 327 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 328                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 329                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 330
 331 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 332                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 333
 334 $(obj)u-boot.dis:       $(obj)u-boot
 335                 $(OBJDUMP) -d $< > $@
 336
 337 GEN_UBOOT = \
 338                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 339                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 340                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 341                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 342                         -Map u-boot.map -o u-boot
 343 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 344                 $(GEN_UBOOT)
 345 ifeq ($(CONFIG_KALLSYMS),y)
 346                 smap=`$(call SYSTEM_MAP,u-boot) | \
 347                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 348                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 349                         -c common/system_map.c -o $(obj)common/system_map.o
 350                 $(GEN_UBOOT) $(obj)common/system_map.o
 351 endif
 352
 353 $(OBJS):        depend
 354                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 355
 356 $(LIBS):        depend $(SUBDIRS)
 357                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 358
 359 $(LIBBOARD):    depend $(LIBS)
 360                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 361
 362 $(SUBDIRS):     depend
 363                 $(MAKE) -C $@ all
 364
 365 $(LDSCRIPT):    depend
 366                 $(MAKE) -C $(dir $@) $(notdir $@)
 367
 368 $(obj)u-boot.lds: $(LDSCRIPT)
 369                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 370
 371 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 372                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 373
 374 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 375                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 376
 377 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 378                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 379
 380 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 381                 cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 382                 cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
 383
 384 $(VERSION_FILE):
 385                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 386                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 387                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 388
 389 $(TIMESTAMP_FILE):
 390                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 391                 @date +'#define U_BOOT_TIME "%T"' >> $@
 392
 393 gdbtools:
 394                 $(MAKE) -C tools/gdb all || exit 1
 395
 396 updater:
 397                 $(MAKE) -C tools/updater all || exit 1
 398
 399 env:
 400                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 401
 402 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 403                 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 404
 405 TAG_SUBDIRS += include
 406 TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
 407 TAG_SUBDIRS += cpu/$(CPU)
 408 TAG_SUBDIRS += lib_$(ARCH)
 409 TAG_SUBDIRS += fs/cramfs
 410 TAG_SUBDIRS += fs/fat
 411 TAG_SUBDIRS += fs/fdos
 412 TAG_SUBDIRS += fs/jffs2
 413 TAG_SUBDIRS += fs/yaffs2
 414 TAG_SUBDIRS += net
 415 TAG_SUBDIRS += disk
 416 TAG_SUBDIRS += common
 417 TAG_SUBDIRS += drivers/bios_emulator
 418 TAG_SUBDIRS += drivers/block
 419 TAG_SUBDIRS += drivers/gpio
 420 TAG_SUBDIRS += drivers/hwmon
 421 TAG_SUBDIRS += drivers/i2c
 422 TAG_SUBDIRS += drivers/input
 423 TAG_SUBDIRS += drivers/misc
 424 TAG_SUBDIRS += drivers/mmc
 425 TAG_SUBDIRS += drivers/mtd
 426 TAG_SUBDIRS += drivers/mtd/nand
 427 TAG_SUBDIRS += drivers/mtd/onenand
 428 TAG_SUBDIRS += drivers/mtd/spi
 429 TAG_SUBDIRS += drivers/net
 430 TAG_SUBDIRS += drivers/net/sk98lin
 431 TAG_SUBDIRS += drivers/pci
 432 TAG_SUBDIRS += drivers/pcmcia
 433 TAG_SUBDIRS += drivers/qe
 434 TAG_SUBDIRS += drivers/rtc
 435 TAG_SUBDIRS += drivers/serial
 436 TAG_SUBDIRS += drivers/spi
 437 TAG_SUBDIRS += drivers/usb
 438 TAG_SUBDIRS += drivers/video
 439
 440 tags ctags:
 441                 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 442                                                 -name '*.[ch]' -print`
 443
 444 etags:
 445                 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 446                                                 -name '*.[ch]' -print`
 447 cscope:
 448                 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
 449                                                 > cscope.files
 450                 cscope -b -q -k
 451
 452 SYSTEM_MAP = \
 453                 $(NM) $1 | \
 454                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 455                 LC_ALL=C sort
 456 $(obj)System.map:       $(obj)u-boot
 457                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 458
 459 #
 460 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 461 #
 462 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 463 # the dep file is only include in this top level makefile to determine when
 464 # to regenerate the autoconf.mk file.
 465 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 466         @$(XECHO) Generating $@ ; \
 467         set -e ; \
 468         : Generate the dependancies ; \
 469         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 470                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 471
 472 $(obj)include/autoconf.mk: $(obj)include/config.h
 473         @$(XECHO) Generating $@ ; \
 474         set -e ; \
 475         : Extract the config macros ; \
 476         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 477                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 478         mv $@.tmp $@
 479
 480 #########################################################################
 481 else    # !config.mk
 482 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 483 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 484 $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 485 dep tags ctags etags cscope $(obj)System.map:
 486         @echo "System not configured - see README" >&2
 487         @ exit 1
 488 endif   # config.mk
 489
 490 .PHONY : CHANGELOG
 491 CHANGELOG:
 492         git log --no-merges U-Boot-1_1_5.. | \
 493         unexpand -a | sed -e 's/\s\s*$$//' > $@
 494
 495 include/license.h: tools/bin2header COPYING
 496          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 497 #########################################################################
 498
 499 unconfig:
 500         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 501                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 502                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 503
 504 #========================================================================
 505 # PowerPC
 506 #========================================================================
 507
 508 #########################################################################
 509 ## MPC5xx Systems
 510 #########################################################################
 511
 512 canmb_config:   unconfig
 513         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 514
 515 cmi_mpc5xx_config:      unconfig
 516         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 517
 518 PATI_config:            unconfig
 519         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 520
 521 #########################################################################
 522 ## MPC5xxx Systems
 523 #########################################################################
 524
 525 aev_config: unconfig
 526         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 527
 528 BC3450_config:  unconfig
 529         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 530
 531 cm5200_config:  unconfig
 532         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 533
 534 cpci5200_config:  unconfig
 535         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 536
 537 digsy_mtc_config \
 538 digsy_mtc_LOWBOOT_config        \
 539 digsy_mtc_RAMBOOT_config:       unconfig
 540         @mkdir -p $(obj)include
 541         @mkdir -p $(obj)board/digsy_mtc
 542         @ >$(obj)include/config.h
 543         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 544                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 545                   echo "... with LOWBOOT configuration" ; \
 546                 }
 547         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 548                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 549                   echo "... with RAMBOOT configuration" ; \
 550                 }
 551         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 552
 553 galaxy5200_LOWBOOT_config \
 554 galaxy5200_config:      unconfig
 555         @mkdir -p $(obj)include
 556         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 557         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 558
 559 hmi1001_config: unconfig
 560         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 561
 562 Lite5200_config                         \
 563 Lite5200_LOWBOOT_config                 \
 564 Lite5200_LOWBOOT08_config               \
 565 icecube_5200_config                     \
 566 icecube_5200_LOWBOOT_config             \
 567 icecube_5200_LOWBOOT08_config           \
 568 icecube_5200_DDR_config                 \
 569 icecube_5200_DDR_LOWBOOT_config         \
 570 icecube_5200_DDR_LOWBOOT08_config       \
 571 icecube_5100_config:                    unconfig
 572         @mkdir -p $(obj)include
 573         @mkdir -p $(obj)board/icecube
 574         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 575                 { if [ "$(findstring DDR,$@)" ] ; \
 576                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 577                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 578                   fi ; \
 579                   $(XECHO) "... with LOWBOOT configuration" ; \
 580                 }
 581         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 582                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 583                   echo "... with 8 MB flash only" ; \
 584                   $(XECHO) "... with LOWBOOT configuration" ; \
 585                 }
 586         @[ -z "$(findstring DDR,$@)" ] || \
 587                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 588                   $(XECHO) "... DDR memory revision" ; \
 589                 }
 590         @[ -z "$(findstring 5200,$@)" ] || \
 591                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 592                   $(XECHO) "... with MPC5200 processor" ; \
 593                 }
 594         @[ -z "$(findstring 5100,$@)" ] || \
 595                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 596                   $(XECHO) "... with MGT5100 processor" ; \
 597                 }
 598         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 599
 600 jupiter_config: unconfig
 601         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 602
 603 inka4x0_config: unconfig
 604         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 605
 606 lite5200b_config        \
 607 lite5200b_PM_config     \
 608 lite5200b_LOWBOOT_config:       unconfig
 609         @mkdir -p $(obj)include
 610         @mkdir -p $(obj)board/icecube
 611         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 612         @ $(XECHO) "... DDR memory revision"
 613         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 614         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 615         @[ -z "$(findstring _PM_,$@)" ] || \
 616                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 617                   $(XECHO) "... with power management (low-power mode) support" ; \
 618                 }
 619         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 620                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 621                   $(XECHO) "... with LOWBOOT configuration" ; \
 622                 }
 623         @ $(XECHO) "... with MPC5200B processor"
 624         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 625
 626 mcc200_config   \
 627 mcc200_SDRAM_config     \
 628 mcc200_highboot_config  \
 629 mcc200_COM12_config     \
 630 mcc200_COM12_SDRAM_config       \
 631 mcc200_COM12_highboot_config    \
 632 mcc200_COM12_highboot_SDRAM_config      \
 633 mcc200_highboot_SDRAM_config    \
 634 prs200_config   \
 635 prs200_DDR_config       \
 636 prs200_highboot_config  \
 637 prs200_highboot_DDR_config:     unconfig
 638         @mkdir -p $(obj)include
 639         @mkdir -p $(obj)board/mcc200
 640         @[ -n "$(findstring highboot,$@)" ] || \
 641                 { $(XECHO) "... with lowboot configuration" ; \
 642                 }
 643         @[ -z "$(findstring highboot,$@)" ] || \
 644                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 645                   $(XECHO) "... with highboot configuration" ; \
 646                 }
 647         @[ -n "$(findstring _SDRAM,$@)" ] || \
 648                 { if [ -n "$(findstring mcc200,$@)" ]; \
 649                   then \
 650                         $(XECHO) "... with DDR" ; \
 651                   else \
 652                         if [ -n "$(findstring _DDR,$@)" ];\
 653                         then \
 654                                 $(XECHO) "... with DDR" ; \
 655                         else \
 656                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 657                                 $(XECHO) "... with SDRAM" ; \
 658                         fi; \
 659                   fi; \
 660                 }
 661         @[ -z "$(findstring _SDRAM,$@)" ] || \
 662                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 663                   $(XECHO) "... with SDRAM" ; \
 664                 }
 665         @[ -z "$(findstring COM12,$@)" ] || \
 666                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 667                   $(XECHO) "... with console on COM12" ; \
 668                 }
 669         @[ -z "$(findstring prs200,$@)" ] || \
 670                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 671                 }
 672         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 673
 674 mecp5200_config:  unconfig
 675         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 676
 677 motionpro_config:       unconfig
 678         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 679
 680 mucmc52_config:         unconfig
 681         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 682
 683 munices_config: unconfig
 684         @$(MKCONFIG) munices ppc mpc5xxx munices
 685
 686 MVBC_P_config: unconfig
 687         @mkdir -p $(obj)include
 688         @mkdir -p $(obj)board/mvbc_p
 689         @ >$(obj)include/config.h
 690         @[ -z "$(findstring MVBC_P,$@)" ] || \
 691         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 692         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 693
 694 o2dnt_config:   unconfig
 695         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 696
 697 pcm030_config \
 698 pcm030_LOWBOOT_config:  unconfig
 699         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 700         @ >$(obj)include/config.h
 701         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 702                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 703                   echo "... with LOWBOOT configuration" ; \
 704                 }
 705         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 706
 707 pf5200_config:  unconfig
 708         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 709
 710 PM520_config \
 711 PM520_DDR_config \
 712 PM520_ROMBOOT_config \
 713 PM520_ROMBOOT_DDR_config:       unconfig
 714         @mkdir -p $(obj)include
 715         @[ -z "$(findstring DDR,$@)" ] || \
 716                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 717                   $(XECHO) "... DDR memory revision" ; \
 718                 }
 719         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 720                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 721                   $(XECHO) "... booting from 8-bit flash" ; \
 722                 }
 723         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 724
 725 smmaco4_config: unconfig
 726         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 727
 728 spieval_config: unconfig
 729         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 730
 731 TB5200_B_config \
 732 TB5200_config:  unconfig
 733         @mkdir -p $(obj)include
 734         @[ -z "$(findstring _B,$@)" ] || \
 735                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 736                   $(XECHO) "... with MPC5200B processor" ; \
 737                 }
 738         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 739
 740 MINI5200_config \
 741 EVAL5200_config \
 742 TOP5200_config: unconfig
 743         @mkdir -p $(obj)include
 744         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 745         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 746
 747 Total5100_config                \
 748 Total5200_config                \
 749 Total5200_lowboot_config        \
 750 Total5200_Rev2_config           \
 751 Total5200_Rev2_lowboot_config:  unconfig
 752         @mkdir -p $(obj)include
 753         @mkdir -p $(obj)board/total5200
 754         @[ -z "$(findstring 5100,$@)" ] || \
 755                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 756                   $(XECHO) "... with MGT5100 processor" ; \
 757                 }
 758         @[ -z "$(findstring 5200,$@)" ] || \
 759                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 760                   $(XECHO) "... with MPC5200 processor" ; \
 761                 }
 762         @[ -n "$(findstring Rev,$@)" ] || \
 763                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 764                   $(XECHO) "... revision 1 board" ; \
 765                 }
 766         @[ -z "$(findstring Rev2_,$@)" ] || \
 767                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 768                   $(XECHO) "... revision 2 board" ; \
 769                 }
 770         @[ -z "$(findstring lowboot_,$@)" ] || \
 771                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 772                   $(XECHO) "... with lowboot configuration" ; \
 773                 }
 774         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 775
 776 cam5200_config \
 777 cam5200_niosflash_config \
 778 fo300_config \
 779 MiniFAP_config \
 780 TQM5200S_config \
 781 TQM5200S_HIGHBOOT_config \
 782 TQM5200_B_config \
 783 TQM5200_B_HIGHBOOT_config \
 784 TQM5200_config  \
 785 TQM5200_STK100_config:  unconfig
 786         @mkdir -p $(obj)include
 787         @mkdir -p $(obj)board/tqc/tqm5200
 788         @[ -z "$(findstring cam5200,$@)" ] || \
 789                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 790                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 791                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 792                   $(XECHO) "... TQM5200S on Cam5200" ; \
 793                 }
 794         @[ -z "$(findstring niosflash,$@)" ] || \
 795                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 796                   $(XECHO) "... with NIOS flash driver" ; \
 797                 }
 798         @[ -z "$(findstring fo300,$@)" ] || \
 799                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 800                   $(XECHO) "... TQM5200 on FO300" ; \
 801                 }
 802         @[ -z "$(findstring MiniFAP,$@)" ] || \
 803                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 804                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 805                 }
 806         @[ -z "$(findstring STK100,$@)" ] || \
 807                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 808                   $(XECHO) "... on a STK52XX.100 base board" ; \
 809                 }
 810         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 811                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 812                 }
 813         @[ -z "$(findstring TQM5200S,$@)" ] || \
 814                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 815                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 816                 }
 817         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 818                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 819                 }
 820         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 821
 822 uc101_config:           unconfig
 823         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 824
 825 v38b_config: unconfig
 826         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 827
 828 #########################################################################
 829 ## MPC512x Systems
 830 #########################################################################
 831
 832 aria_config:    unconfig
 833         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 834
 835 mecp5123_config:        unconfig
 836         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 837
 838 mpc5121ads_config \
 839 mpc5121ads_rev2_config  \
 840         : unconfig
 841         @mkdir -p $(obj)include
 842         @if [ "$(findstring rev2,$@)" ] ; then \
 843                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 844         fi
 845         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 846
 847 #########################################################################
 848 ## MPC8xx Systems
 849 #########################################################################
 850
 851 Adder_config    \
 852 Adder87x_config \
 853 AdderII_config  \
 854         :               unconfig
 855         @mkdir -p $(obj)include
 856         $(if $(findstring AdderII,$@), \
 857         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 858         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 859
 860 AdderUSB_config:        unconfig
 861         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 862
 863 ADS860_config     \
 864 FADS823_config    \
 865 FADS850SAR_config \
 866 MPC86xADS_config  \
 867 MPC885ADS_config  \
 868 FADS860T_config:        unconfig
 869         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 870
 871 AMX860_config   :       unconfig
 872         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 873
 874 c2mon_config:           unconfig
 875         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 876
 877 CCM_config:             unconfig
 878         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 879
 880 cogent_mpc8xx_config:   unconfig
 881         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 882
 883 ELPT860_config:         unconfig
 884         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 885
 886 EP88x_config:           unconfig
 887         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 888
 889 ESTEEM192E_config:      unconfig
 890         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 891
 892 ETX094_config   :       unconfig
 893         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 894
 895 FLAGADM_config: unconfig
 896         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 897
 898 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 899
 900 GEN860T_SC_config       \
 901 GEN860T_config: unconfig
 902         @mkdir -p $(obj)include
 903         @[ -z "$(findstring _SC,$@)" ] || \
 904                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 905                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 906                 }
 907         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 908
 909 GENIETV_config: unconfig
 910         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 911
 912 GTH_config:     unconfig
 913         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 914
 915 hermes_config   :       unconfig
 916         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 917
 918 HMI10_config    :       unconfig
 919         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 920
 921 IAD210_config: unconfig
 922         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 923
 924 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 925
 926 ICU862_100MHz_config    \
 927 ICU862_config: unconfig
 928         @mkdir -p $(obj)include
 929         @[ -z "$(findstring _100MHz,$@)" ] || \
 930                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 931                   $(XECHO) "... with 100MHz system clock" ; \
 932                 }
 933         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 934
 935 IP860_config    :       unconfig
 936         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 937
 938 IVML24_256_config \
 939 IVML24_128_config \
 940 IVML24_config:  unconfig
 941         @mkdir -p $(obj)include
 942         @[ -z "$(findstring IVML24_config,$@)" ] || \
 943                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 944                  }
 945         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 946                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 947                  }
 948         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 949                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 950                  }
 951         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 952
 953 IVMS8_256_config \
 954 IVMS8_128_config \
 955 IVMS8_config:   unconfig
 956         @mkdir -p $(obj)include
 957         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 958                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 959                  }
 960         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 961                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 962                  }
 963         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 964                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 965                  }
 966         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 967
 968 kmsupx4_config:         unconfig
 969         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 970
 971 KUP4K_config    :       unconfig
 972         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 973
 974 KUP4X_config    :       unconfig
 975         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 976
 977 LANTEC_config   :       unconfig
 978         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 979
 980 lwmon_config:           unconfig
 981         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 982
 983 MBX_config      \
 984 MBX860T_config: unconfig
 985         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 986
 987 mgsuvd_config:          unconfig
 988         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 989
 990 MHPC_config:            unconfig
 991         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 992
 993 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 994
 995 NETVIA_V2_config \
 996 NETVIA_config:          unconfig
 997         @mkdir -p $(obj)include
 998         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 999                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
1000                   $(XECHO) "... Version 1" ; \
1001                  }
1002         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
1003                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
1004                   $(XECHO) "... Version 2" ; \
1005                  }
1006         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
1007
1008 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
1009
1010 NETPHONE_V2_config \
1011 NETPHONE_config:        unconfig
1012         @mkdir -p $(obj)include
1013         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
1014                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
1015                  }
1016         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
1017                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
1018                  }
1019         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
1020
1021 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
1022
1023 NETTA_ISDN_6412_SWAPHOOK_config \
1024 NETTA_ISDN_SWAPHOOK_config \
1025 NETTA_6412_SWAPHOOK_config \
1026 NETTA_SWAPHOOK_config \
1027 NETTA_ISDN_6412_config \
1028 NETTA_ISDN_config \
1029 NETTA_6412_config \
1030 NETTA_config:           unconfig
1031         @mkdir -p $(obj)include
1032         @[ -z "$(findstring ISDN_,$@)" ] || \
1033                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1034                  }
1035         @[ -n "$(findstring ISDN_,$@)" ] || \
1036                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1037                  }
1038         @[ -z "$(findstring 6412_,$@)" ] || \
1039                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1040                  }
1041         @[ -n "$(findstring 6412_,$@)" ] || \
1042                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1043                  }
1044         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1045                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1046                  }
1047         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1048                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1049                  }
1050         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1051
1052 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1053
1054 NETTA2_V2_config \
1055 NETTA2_config:          unconfig
1056         @mkdir -p $(obj)include
1057         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1058                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1059                  }
1060         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1061                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1062                  }
1063         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1064
1065 NC650_Rev1_config \
1066 NC650_Rev2_config \
1067 CP850_config:   unconfig
1068         @mkdir -p $(obj)include
1069         @[ -z "$(findstring CP850,$@)" ] || \
1070                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1071                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1072                  }
1073         @[ -z "$(findstring Rev1,$@)" ] || \
1074                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1075                  }
1076         @[ -z "$(findstring Rev2,$@)" ] || \
1077                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1078                  }
1079         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1080
1081 NX823_config:           unconfig
1082         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1083
1084 pcu_e_config:           unconfig
1085         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1086
1087 QS850_config:   unconfig
1088         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1089
1090 QS823_config:   unconfig
1091         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1092
1093 QS860T_config:  unconfig
1094         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1095
1096 quantum_config: unconfig
1097         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1098
1099 R360MPI_config: unconfig
1100         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1101
1102 RBC823_config:  unconfig
1103         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1104
1105 RPXClassic_config:      unconfig
1106         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1107
1108 RPXlite_config:         unconfig
1109         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1110
1111 RPXlite_DW_64_config            \
1112 RPXlite_DW_LCD_config           \
1113 RPXlite_DW_64_LCD_config        \
1114 RPXlite_DW_NVRAM_config         \
1115 RPXlite_DW_NVRAM_64_config      \
1116 RPXlite_DW_NVRAM_LCD_config     \
1117 RPXlite_DW_NVRAM_64_LCD_config  \
1118 RPXlite_DW_config:      unconfig
1119         @mkdir -p $(obj)include
1120         @[ -z "$(findstring _64,$@)" ] || \
1121                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1122                   $(XECHO) "... with 64MHz system clock ..."; \
1123                 }
1124         @[ -z "$(findstring _LCD,$@)" ] || \
1125                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1126                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1127                   $(XECHO) "... with LCD display ..."; \
1128                 }
1129         @[ -z "$(findstring _NVRAM,$@)" ] || \
1130                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1131                   $(XECHO) "... with ENV in NVRAM ..."; \
1132                 }
1133         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1134
1135 rmu_config:     unconfig
1136         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1137
1138 RRvision_config:        unconfig
1139         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1140
1141 RRvision_LCD_config:    unconfig
1142         @mkdir -p $(obj)include
1143         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1144         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1145         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1146
1147 SM850_config    :       unconfig
1148         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1149
1150 spc1920_config:         unconfig
1151         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1152
1153 SPD823TS_config:        unconfig
1154         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1155
1156 stxxtc_config:  unconfig
1157         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1158
1159 svm_sc8xx_config:       unconfig
1160         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1161
1162 SXNI855T_config:        unconfig
1163         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1164
1165 # EMK MPC8xx based modules
1166 TOP860_config:          unconfig
1167         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1168
1169 # Play some tricks for configuration selection
1170 # Only 855 and 860 boards may come with FEC
1171 # and only 823 boards may have LCD support
1172 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1173
1174 FPS850L_config          \
1175 FPS860L_config          \
1176 NSCU_config             \
1177 TQM823L_config          \
1178 TQM823L_LCD_config      \
1179 TQM850L_config          \
1180 TQM855L_config          \
1181 TQM860L_config          \
1182 TQM862L_config          \
1183 TQM823M_config          \
1184 TQM850M_config          \
1185 TQM855M_config          \
1186 TQM860M_config          \
1187 TQM862M_config          \
1188 TQM866M_config          \
1189 TQM885D_config          \
1190 TK885D_config           \
1191 virtlab2_config:        unconfig
1192         @mkdir -p $(obj)include
1193         @[ -z "$(findstring _LCD,$@)" ] || \
1194                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1195                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1196                   $(XECHO) "... with LCD display" ; \
1197                 }
1198         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1199
1200 TTTech_config:  unconfig
1201         @mkdir -p $(obj)include
1202         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1203         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1204         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1205
1206 uc100_config    :       unconfig
1207         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1208
1209 v37_config:     unconfig
1210         @mkdir -p $(obj)include
1211         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1212         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1213         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1214
1215 wtk_config:     unconfig
1216         @mkdir -p $(obj)include
1217         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1218         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1219         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1220
1221 #########################################################################
1222 ## PPC4xx Systems
1223 #########################################################################
1224 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1225
1226 acadia_config:  unconfig
1227         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1228
1229 acadia_nand_config:     unconfig
1230         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1231         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1232         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1233         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1234         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1235         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1236
1237 ADCIOP_config:  unconfig
1238         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1239
1240 alpr_config:    unconfig
1241         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1242
1243 AP1000_config:unconfig
1244         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1245
1246 APC405_config:  unconfig
1247         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1248
1249 AR405_config:   unconfig
1250         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1251
1252 ASH405_config:  unconfig
1253         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1254
1255 bamboo_config:  unconfig
1256         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1257
1258 bamboo_nand_config:     unconfig
1259         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1260         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1261         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1262         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1263         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1264         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1265
1266 bubinga_config: unconfig
1267         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1268
1269 CANBT_config:   unconfig
1270         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1271
1272 # Arches, Canyonlands & Glacier use different U-Boot images
1273 arches_config \
1274 canyonlands_config \
1275 glacier_config: unconfig
1276         @mkdir -p $(obj)include
1277         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1278                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1279         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1280
1281 canyonlands_nand_config \
1282 glacier_nand_config:    unconfig
1283         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1284         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1285         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1286         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1287                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1288         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1289         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1290         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1291
1292 CATcenter_config        \
1293 CATcenter_25_config     \
1294 CATcenter_33_config:    unconfig
1295         @mkdir -p $(obj)include
1296         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1297         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1298         @[ -z "$(findstring _25,$@)" ] || \
1299                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1300                   $(XECHO) "SysClk = 25MHz" ; \
1301                 }
1302         @[ -z "$(findstring _33,$@)" ] || \
1303                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1304                   $(XECHO) "SysClk = 33MHz" ; \
1305                 }
1306         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1307
1308 CMS700_config:  unconfig
1309         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1310
1311 CPCI2DP_config: unconfig
1312         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1313
1314 CPCI405_config          \
1315 CPCI4052_config         \
1316 CPCI405DT_config        \
1317 CPCI405AB_config:       unconfig
1318         @mkdir -p $(obj)board/esd/cpci405
1319         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1320
1321 CPCIISER4_config:       unconfig
1322         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1323
1324 CRAYL1_config:  unconfig
1325         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1326
1327 csb272_config:  unconfig
1328         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1329
1330 csb472_config:  unconfig
1331         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1332
1333 DASA_SIM_config: unconfig
1334         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1335
1336 dlvision_config: unconfig
1337         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1338
1339 DP405_config:   unconfig
1340         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1341
1342 DU405_config:   unconfig
1343         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1344
1345 DU440_config:   unconfig
1346         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1347
1348 ebony_config:   unconfig
1349         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1350
1351 ERIC_config:    unconfig
1352         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1353
1354 EXBITGEN_config:        unconfig
1355         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1356
1357 fx12mm_flash_config: unconfig
1358         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1359         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1360         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1361                 > $(obj)board/avnet/fx12mm/config.tmp
1362         @echo "TEXT_BASE := 0xFFCB0000" \
1363                 >> $(obj)board/avnet/fx12mm/config.tmp
1364         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1365
1366 fx12mm_config: unconfig
1367         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1368         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1369         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1370                 > $(obj)board/avnet/fx12mm/config.tmp
1371         @echo "TEXT_BASE := 0x03000000" \
1372                 >> $(obj)board/avnet/fx12mm/config.tmp
1373         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1374
1375 G2000_config:   unconfig
1376         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1377
1378 gdppc440etx_config:     unconfig
1379         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1380
1381 hcu4_config:    unconfig
1382         @mkdir -p $(obj)board/netstal/common
1383         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1384
1385 hcu5_config:    unconfig
1386         @mkdir -p $(obj)board/netstal/common
1387         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1388
1389 HH405_config:   unconfig
1390         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1391
1392 HUB405_config:  unconfig
1393         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1394
1395 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1396 intip_config \
1397 devconcenter_config:    unconfig
1398         @mkdir -p $(obj)include
1399         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1400                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1401         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1402
1403 JSE_config:     unconfig
1404         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1405
1406 KAREF_config: unconfig
1407         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1408
1409 katmai_config:  unconfig
1410         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1411
1412 # Kilauea & Haleakala images are identical (recognized via PVR)
1413 kilauea_config \
1414 haleakala_config: unconfig
1415         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1416
1417 kilauea_nand_config \
1418 haleakala_nand_config: unconfig
1419         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1420         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1421         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1422         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1423         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1424         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1425
1426 korat_config:   unconfig
1427         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1428
1429 luan_config:    unconfig
1430         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1431
1432 lwmon5_config:  unconfig
1433         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1434
1435 makalu_config:  unconfig
1436         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1437
1438 mcu25_config:  unconfig
1439         @mkdir -p $(obj)board/netstal/common
1440         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1441
1442 METROBOX_config: unconfig
1443         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1444
1445 MIP405_config:  unconfig
1446         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1447
1448 MIP405T_config: unconfig
1449         @mkdir -p $(obj)include
1450         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1451         @$(XECHO) "Enable subset config for MIP405T"
1452         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1453
1454 ML2_config:     unconfig
1455         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1456
1457 ml300_config:   unconfig
1458         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1459
1460 ml507_flash_config: unconfig
1461         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1462         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1463         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1464                 > $(obj)board/xilinx/ml507/config.tmp
1465         @echo "TEXT_BASE := 0xFE360000" \
1466                 >> $(obj)board/xilinx/ml507/config.tmp
1467         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1468
1469 ml507_config: unconfig
1470         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1471         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1472         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1473                 > $(obj)board/xilinx/ml507/config.tmp
1474         @echo "TEXT_BASE := 0x04000000"  \
1475                 >> $(obj)board/xilinx/ml507/config.tmp
1476         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1477
1478 neo_config:     unconfig
1479         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1480
1481 ocotea_config:  unconfig
1482         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1483
1484 OCRTC_config            \
1485 ORSG_config:    unconfig
1486         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1487
1488 p3p440_config:  unconfig
1489         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1490
1491 PCI405_config:  unconfig
1492         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1493
1494 pcs440ep_config:        unconfig
1495         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1496
1497 PIP405_config:  unconfig
1498         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1499
1500 PLU405_config:  unconfig
1501         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1502
1503 PMC405_config:  unconfig
1504         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1505
1506 PMC405DE_config:        unconfig
1507         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1508
1509 PMC440_config:  unconfig
1510         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1511
1512 PPChameleonEVB_config           \
1513 PPChameleonEVB_BA_25_config     \
1514 PPChameleonEVB_ME_25_config     \
1515 PPChameleonEVB_HI_25_config     \
1516 PPChameleonEVB_BA_33_config     \
1517 PPChameleonEVB_ME_33_config     \
1518 PPChameleonEVB_HI_33_config:    unconfig
1519         @mkdir -p $(obj)include
1520         @[ -z "$(findstring EVB_BA,$@)" ] || \
1521                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1522                   $(XECHO) "... BASIC model" ; \
1523                 }
1524         @[ -z "$(findstring EVB_ME,$@)" ] || \
1525                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1526                   $(XECHO) "... MEDIUM model" ; \
1527                 }
1528         @[ -z "$(findstring EVB_HI,$@)" ] || \
1529                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1530                   $(XECHO) "... HIGH-END model" ; \
1531                 }
1532         @[ -z "$(findstring _25,$@)" ] || \
1533                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1534                   $(XECHO) "SysClk = 25MHz" ; \
1535                 }
1536         @[ -z "$(findstring _33,$@)" ] || \
1537                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1538                   $(XECHO) "SysClk = 33MHz" ; \
1539                 }
1540         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1541
1542 quad100hd_config:       unconfig
1543         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1544
1545 redwood_config: unconfig
1546         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1547
1548 sbc405_config:  unconfig
1549         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1550
1551 sc3_config:unconfig
1552         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1553
1554 sequoia_config \
1555 rainier_config: unconfig
1556         @mkdir -p $(obj)include
1557         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1558                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1559         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1560
1561 sequoia_nand_config \
1562 rainier_nand_config: unconfig
1563         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1564         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1565         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1566         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1567                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1568         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1569         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1570         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1571
1572 sequoia_ramboot_config \
1573 rainier_ramboot_config: unconfig
1574         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1575         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1576         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1577                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1578         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1579         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1580         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1581                 $(obj)board/amcc/sequoia/config.tmp
1582
1583 taihu_config:   unconfig
1584         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1585
1586 taishan_config: unconfig
1587         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1588
1589 v5fx30teval_config: unconfig
1590         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1591         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1592         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1593                 > $(obj)board/avnet/v5fx30teval/config.tmp
1594         @echo "TEXT_BASE := 0x03000000" \
1595                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1596         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1597
1598 v5fx30teval_flash_config: unconfig
1599         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1600         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1601         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1602                 > $(obj)board/avnet/v5fx30teval/config.tmp
1603         @echo "TEXT_BASE := 0xFF1C0000" \
1604                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1605         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1606
1607 VOH405_config:  unconfig
1608         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1609
1610 VOM405_config:  unconfig
1611         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1612
1613 W7OLMC_config   \
1614 W7OLMG_config: unconfig
1615         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1616
1617 # Walnut & Sycamore images are identical (recognized via PVR)
1618 walnut_config \
1619 sycamore_config: unconfig
1620         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1621
1622 WUH405_config:  unconfig
1623         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1624
1625 xilinx-ppc405-generic_flash_config: unconfig
1626         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1627         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1628                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1629         @echo "TEXT_BASE := 0xFE360000" \
1630                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1631         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1632
1633 xilinx-ppc405-generic_config: unconfig
1634         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1635         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1636                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1637         @echo "TEXT_BASE := 0x04000000" \
1638                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1639         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1640
1641 xilinx-ppc440-generic_flash_config: unconfig
1642         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1643         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1644                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1645         @echo "TEXT_BASE := 0xFE360000" \
1646                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1647         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1648
1649 xilinx-ppc440-generic_config: unconfig
1650         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1651         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1652                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1653         @echo "TEXT_BASE := 0x04000000" \
1654                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1655         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1656
1657 XPEDITE1000_config:     unconfig
1658         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1659
1660 yosemite_config \
1661 yellowstone_config: unconfig
1662         @mkdir -p $(obj)include
1663         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1664                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1665         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1666
1667 yucca_config:   unconfig
1668         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1669
1670 zeus_config:    unconfig
1671         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1672
1673 #########################################################################
1674 ## MPC8220 Systems
1675 #########################################################################
1676
1677 Alaska8220_config       \
1678 Yukon8220_config:       unconfig
1679         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1680
1681 sorcery_config:         unconfig
1682         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1683
1684 #########################################################################
1685 ## MPC824x Systems
1686 #########################################################################
1687 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1688
1689 A3000_config: unconfig
1690         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1691
1692 barco_config: unconfig
1693         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1694
1695 BMW_config: unconfig
1696         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1697
1698 CPC45_config    \
1699 CPC45_ROMBOOT_config:   unconfig
1700         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1701         @cd $(obj)include ;                             \
1702         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1703                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1704                 $(XECHO) "... booting from 8-bit flash" ; \
1705         else \
1706                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1707                 $(XECHO) "... booting from 64-bit flash" ; \
1708         fi; \
1709         echo "export CONFIG_BOOT_ROM" >> config.mk;
1710
1711 CU824_config: unconfig
1712         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1713
1714 debris_config: unconfig
1715         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1716
1717 eXalion_config: unconfig
1718         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1719
1720 HIDDEN_DRAGON_config: unconfig
1721         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1722
1723 kvme080_config: unconfig
1724         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1725
1726 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1727 # time permits.
1728 #linkstation_HDLAN_config \
1729 # Remove this line when HDLAN is fixed
1730 linkstation_HGLAN_config: unconfig
1731         @mkdir -p $(obj)include
1732         @case $@ in \
1733                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1734                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1735         esac
1736         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1737
1738 MOUSSE_config: unconfig
1739         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1740
1741 MUSENKI_config: unconfig
1742         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1743
1744 MVBLUE_config:  unconfig
1745         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1746
1747 OXC_config: unconfig
1748         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1749
1750 PN62_config: unconfig
1751         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1752
1753 Sandpoint8240_config: unconfig
1754         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1755
1756 Sandpoint8245_config: unconfig
1757         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1758
1759 sbc8240_config: unconfig
1760         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1761
1762 SL8245_config: unconfig
1763         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1764
1765 utx8245_config: unconfig
1766         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1767
1768 #########################################################################
1769 ## MPC8260 Systems
1770 #########################################################################
1771
1772 atc_config:     unconfig
1773         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1774
1775 cogent_mpc8260_config:  unconfig
1776         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1777
1778 CPU86_config    \
1779 CPU86_ROMBOOT_config: unconfig
1780         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1781         @cd $(obj)include ;                             \
1782         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1783                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1784                 $(XECHO) "... booting from 8-bit flash" ; \
1785         else \
1786                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1787                 $(XECHO) "... booting from 64-bit flash" ; \
1788         fi; \
1789         echo "export CONFIG_BOOT_ROM" >> config.mk;
1790
1791 CPU87_config    \
1792 CPU87_ROMBOOT_config: unconfig
1793         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1794         @cd $(obj)include ;                             \
1795         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1796                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1797                 $(XECHO) "... booting from 8-bit flash" ; \
1798         else \
1799                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1800                 $(XECHO) "... booting from 64-bit flash" ; \
1801         fi; \
1802         echo "export CONFIG_BOOT_ROM" >> config.mk;
1803
1804 ep8248_config   \
1805 ep8248E_config  :       unconfig
1806         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1807
1808 ep8260_config:  unconfig
1809         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1810
1811 ep82xxm_config: unconfig
1812         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1813
1814 gw8260_config:  unconfig
1815         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1816
1817 hymod_config:   unconfig
1818         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1819
1820 IDS8247_config: unconfig
1821         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1822
1823 IPHASE4539_config:      unconfig
1824         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1825
1826 ISPAN_config            \
1827 ISPAN_REVB_config:      unconfig
1828         @mkdir -p $(obj)include
1829         @if [ "$(findstring _REVB_,$@)" ] ; then \
1830                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1831         fi
1832         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1833
1834 mgcoge_config   :       unconfig
1835         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1836
1837 MPC8260ADS_config       \
1838 MPC8260ADS_lowboot_config       \
1839 MPC8260ADS_33MHz_config \
1840 MPC8260ADS_33MHz_lowboot_config \
1841 MPC8260ADS_40MHz_config \
1842 MPC8260ADS_40MHz_lowboot_config \
1843 MPC8272ADS_config       \
1844 MPC8272ADS_lowboot_config       \
1845 PQ2FADS_config          \
1846 PQ2FADS_lowboot_config          \
1847 PQ2FADS-VR_config       \
1848 PQ2FADS-VR_lowboot_config       \
1849 PQ2FADS-ZU_config       \
1850 PQ2FADS-ZU_lowboot_config       \
1851 PQ2FADS-ZU_66MHz_config \
1852 PQ2FADS-ZU_66MHz_lowboot_config \
1853         :               unconfig
1854         @mkdir -p $(obj)include
1855         @mkdir -p $(obj)board/freescale/mpc8260ads
1856         $(if $(findstring PQ2FADS,$@), \
1857         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1858         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1859         $(if $(findstring MHz,$@), \
1860         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1861         $(if $(findstring VR,$@), \
1862         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1863         @[ -z "$(findstring lowboot_,$@)" ] || \
1864                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1865                   $(XECHO) "... with lowboot configuration" ; \
1866                 }
1867         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1868
1869 MPC8266ADS_config:      unconfig
1870         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1871
1872 muas3001_dev_config \
1873 muas3001_config :       unconfig
1874         @mkdir -p $(obj)include
1875         @mkdir -p $(obj)board/muas3001
1876         @if [ "$(findstring dev,$@)" ] ; then \
1877                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1878         fi
1879         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1880
1881 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1882 PM825_config    \
1883 PM825_ROMBOOT_config    \
1884 PM825_BIGFLASH_config   \
1885 PM825_ROMBOOT_BIGFLASH_config   \
1886 PM826_config    \
1887 PM826_ROMBOOT_config    \
1888 PM826_BIGFLASH_config   \
1889 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1890         @mkdir -p $(obj)include
1891         @mkdir -p $(obj)board/pm826
1892         @if [ "$(findstring PM825_,$@)" ] ; then \
1893                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1894         else \
1895                 >$(obj)include/config.h ; \
1896         fi
1897         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1898                 $(XECHO) "... booting from 8-bit flash" ; \
1899                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1900                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1901                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1902                         $(XECHO) "... with 32 MB Flash" ; \
1903                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1904                 fi; \
1905         else \
1906                 $(XECHO) "... booting from 64-bit flash" ; \
1907                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1908                         $(XECHO) "... with 32 MB Flash" ; \
1909                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1910                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1911                 else \
1912                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1913                 fi; \
1914         fi
1915         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1916
1917 PM828_config    \
1918 PM828_PCI_config        \
1919 PM828_ROMBOOT_config    \
1920 PM828_ROMBOOT_PCI_config:       unconfig
1921         @mkdir -p $(obj)include
1922         @mkdir -p $(obj)board/pm826
1923         @if [ "$(findstring _PCI_,$@)" ] ; then \
1924                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1925                 $(XECHO) "... with PCI enabled" ; \
1926         fi
1927         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1928                 $(XECHO) "... booting from 8-bit flash" ; \
1929                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1930                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1931         fi
1932         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1933
1934 ppmc8260_config:        unconfig
1935         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1936
1937 Rattler8248_config      \
1938 Rattler_config:         unconfig
1939         @mkdir -p $(obj)include
1940         $(if $(findstring 8248,$@), \
1941         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1942         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1943
1944 RPXsuper_config:        unconfig
1945         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1946
1947 rsdproto_config:        unconfig
1948         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1949
1950 sacsng_config:  unconfig
1951         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1952
1953 sbc8260_config: unconfig
1954         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1955
1956 SCM_config:             unconfig
1957         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1958
1959 TQM8255_AA_config \
1960 TQM8260_AA_config \
1961 TQM8260_AB_config \
1962 TQM8260_AC_config \
1963 TQM8260_AD_config \
1964 TQM8260_AE_config \
1965 TQM8260_AF_config \
1966 TQM8260_AG_config \
1967 TQM8260_AH_config \
1968 TQM8260_AI_config \
1969 TQM8265_AA_config:  unconfig
1970         @mkdir -p $(obj)include
1971         @case "$@" in \
1972         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1973         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1974         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1975         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1976         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1977         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1978         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1979         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1980         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1981         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1982         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1983         esac; \
1984         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1985                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1986         fi; \
1987         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1988         echo "... with $${CFREQ}MHz system clock" ; \
1989         if [ "$${CACHE}" = "yes" ] ; then \
1990                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1991                 $(XECHO) "... with L2 Cache support" ; \
1992         else \
1993                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1994                 $(XECHO) "... without L2 Cache support" ; \
1995         fi; \
1996         if [ "$${BMODE}" = "60x" ] ; then \
1997                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1998                 $(XECHO) "... with 60x Bus Mode" ; \
1999         else \
2000                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
2001                 $(XECHO) "... without 60x Bus Mode" ; \
2002         fi
2003         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
2004
2005 TQM8272_config: unconfig
2006         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
2007
2008 VoVPN-GW_66MHz_config   \
2009 VoVPN-GW_100MHz_config:         unconfig
2010         @mkdir -p $(obj)include
2011         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
2012         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
2013
2014 ZPC1900_config: unconfig
2015         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
2016
2017 #########################################################################
2018 ## Coldfire
2019 #########################################################################
2020
2021 M5208EVBE_config :              unconfig
2022         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
2023
2024 M52277EVB_config \
2025 M52277EVB_spansion_config \
2026 M52277EVB_stmicro_config :      unconfig
2027         @case "$@" in \
2028         M52277EVB_config)               FLASH=SPANSION;; \
2029         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2030         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2031         esac; \
2032         if [ "$${FLASH}" = "SPANSION" ] ; then \
2033                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2034                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2035                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2036                 $(XECHO) "... with SPANSION boot..." ; \
2037         fi; \
2038         if [ "$${FLASH}" = "STMICRO" ] ; then \
2039                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2040                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2041                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2042                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2043                 $(XECHO) "... with ST Micro boot..." ; \
2044         fi
2045         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2046
2047 M5235EVB_config \
2048 M5235EVB_Flash16_config \
2049 M5235EVB_Flash32_config:        unconfig
2050         @case "$@" in \
2051         M5235EVB_config)                FLASH=16;; \
2052         M5235EVB_Flash16_config)        FLASH=16;; \
2053         M5235EVB_Flash32_config)        FLASH=32;; \
2054         esac; \
2055         if [ "$${FLASH}" != "16" ] ; then \
2056                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2057                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2058                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2059         else \
2060                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2061                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2062         fi
2063         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2064
2065 M5249EVB_config :               unconfig
2066         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2067
2068 M5253DEMO_config :              unconfig
2069         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2070
2071 M5253EVBE_config :              unconfig
2072         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2073
2074 cobra5272_config :              unconfig
2075         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2076
2077 EB+MCF-EV123_config :           unconfig
2078         @mkdir -p $(obj)include
2079         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2080         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2081         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2082
2083 EB+MCF-EV123_internal_config :  unconfig
2084         @mkdir -p $(obj)include
2085         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2086         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2087         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2088
2089 idmr_config :                   unconfig
2090         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2091
2092 M5271EVB_config :               unconfig
2093         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2094
2095 M5272C3_config :                unconfig
2096         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2097
2098 M5275EVB_config :               unconfig
2099         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2100
2101 M5282EVB_config :               unconfig
2102         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2103
2104 M53017EVB_config :              unconfig
2105         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2106
2107 M5329AFEE_config \
2108 M5329BFEE_config :      unconfig
2109         @case "$@" in \
2110         M5329AFEE_config)       NAND=0;; \
2111         M5329BFEE_config)       NAND=16;; \
2112         esac; \
2113         if [ "$${NAND}" != "0" ] ; then \
2114                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2115         fi
2116         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2117
2118 M5373EVB_config :       unconfig
2119         @case "$@" in \
2120         M5373EVB_config)        NAND=16;; \
2121         esac; \
2122         if [ "$${NAND}" != "0" ] ; then \
2123                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2124         fi
2125         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2126
2127 M54451EVB_config \
2128 M54451EVB_stmicro_config :      unconfig
2129         @case "$@" in \
2130         M54451EVB_config)               FLASH=NOR;; \
2131         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2132         esac; \
2133         if [ "$${FLASH}" = "NOR" ] ; then \
2134                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2135                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2136                 $(XECHO) "... with NOR boot..." ; \
2137         fi; \
2138         if [ "$${FLASH}" = "STMICRO" ] ; then \
2139                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2140                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2141                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2142                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2143                 $(XECHO) "... with ST Micro boot..." ; \
2144         fi; \
2145         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2146         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2147
2148 M54455EVB_config \
2149 M54455EVB_atmel_config \
2150 M54455EVB_intel_config \
2151 M54455EVB_a33_config \
2152 M54455EVB_a66_config \
2153 M54455EVB_i33_config \
2154 M54455EVB_i66_config \
2155 M54455EVB_stm33_config :        unconfig
2156         @case "$@" in \
2157         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2158         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2159         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2160         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2161         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2162         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2163         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2164         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2165         esac; \
2166         if [ "$${FLASH}" = "INTEL" ] ; then \
2167                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2168                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2169                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2170                 $(XECHO) "... with INTEL boot..." ; \
2171         fi; \
2172         if [ "$${FLASH}" = "ATMEL" ] ; then \
2173                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2174                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2175                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2176                 $(XECHO) "... with ATMEL boot..." ; \
2177         fi; \
2178         if [ "$${FLASH}" = "STMICRO" ] ; then \
2179                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2180                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2181                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2182                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2183                 $(XECHO) "... with ST Micro boot..." ; \
2184         fi; \
2185         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2186         $(XECHO) "... with $${FREQ}Hz input clock"
2187         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2188
2189 M5475AFE_config \
2190 M5475BFE_config \
2191 M5475CFE_config \
2192 M5475DFE_config \
2193 M5475EFE_config \
2194 M5475FFE_config \
2195 M5475GFE_config :       unconfig
2196         @case "$@" in \
2197         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2198         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2199         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2200         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2201         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2202         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2203         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2204         esac; \
2205         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2206         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2207         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2208         if [ "$${RAM1}" != "0" ] ; then \
2209                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2210         fi; \
2211         if [ "$${CODE}" != "0" ] ; then \
2212                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2213         fi; \
2214         if [ "$${VID}" == "1" ] ; then \
2215                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2216         fi; \
2217         if [ "$${USB}" == "1" ] ; then \
2218                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2219         fi
2220         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2221
2222 M5485AFE_config \
2223 M5485BFE_config \
2224 M5485CFE_config \
2225 M5485DFE_config \
2226 M5485EFE_config \
2227 M5485FFE_config \
2228 M5485GFE_config \
2229 M5485HFE_config :       unconfig
2230         @case "$@" in \
2231         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2232         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2233         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2234         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2235         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2236         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2237         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2238         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2239         esac; \
2240         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2241         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2242         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2243         if [ "$${RAM1}" != "0" ] ; then \
2244                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2245         fi; \
2246         if [ "$${CODE}" != "0" ] ; then \
2247                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2248         fi; \
2249         if [ "$${VID}" == "1" ] ; then \
2250                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2251         fi; \
2252         if [ "$${USB}" == "1" ] ; then \
2253                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2254         fi
2255         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2256
2257 TASREG_config :         unconfig
2258         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2259
2260 #########################################################################
2261 ## MPC83xx Systems
2262 #########################################################################
2263
2264 kmeter1_config: unconfig
2265         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2266
2267 MPC8313ERDB_33_config \
2268 MPC8313ERDB_66_config \
2269 MPC8313ERDB_NAND_33_config \
2270 MPC8313ERDB_NAND_66_config: unconfig
2271         @mkdir -p $(obj)include
2272         @mkdir -p $(obj)board/freescale/mpc8313erdb
2273         @if [ "$(findstring _33_,$@)" ] ; then \
2274                 $(XECHO) -n "...33M ..." ; \
2275                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2276         fi ; \
2277         if [ "$(findstring _66_,$@)" ] ; then \
2278                 $(XECHO) -n "...66M..." ; \
2279                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2280         fi ; \
2281         if [ "$(findstring _NAND_,$@)" ] ; then \
2282                 $(XECHO) -n "...NAND..." ; \
2283                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2284                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2285         fi ;
2286         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2287         @if [ "$(findstring _NAND_,$@)" ] ; then \
2288                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2289         fi ;
2290
2291 MPC8315ERDB_config: unconfig
2292         @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2293
2294 MPC8323ERDB_config:     unconfig
2295         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2296
2297 MPC832XEMDS_config \
2298 MPC832XEMDS_HOST_33_config \
2299 MPC832XEMDS_HOST_66_config \
2300 MPC832XEMDS_SLAVE_config \
2301 MPC832XEMDS_ATM_config: unconfig
2302         @mkdir -p $(obj)include
2303         @if [ "$(findstring _HOST_,$@)" ] ; then \
2304                 $(XECHO) -n "... PCI HOST " ; \
2305                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2306         fi ; \
2307         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2308                 $(XECHO) "...PCI SLAVE 66M"  ; \
2309                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2310                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2311         fi ; \
2312         if [ "$(findstring _33_,$@)" ] ; then \
2313                 $(XECHO) -n "...33M ..." ; \
2314                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2315                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2316         fi ; \
2317         if [ "$(findstring _66_,$@)" ] ; then \
2318                 $(XECHO) -n "...66M..." ; \
2319                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2320                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2321         fi ; \
2322         if [ "$(findstring _ATM_,$@)" ] ; then \
2323                 $(XECHO) -n "...ATM..." ; \
2324                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2325                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2326         fi ;
2327         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2328
2329 MPC8349EMDS_config:     unconfig
2330         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2331
2332 MPC8349ITX_config \
2333 MPC8349ITX_LOWBOOT_config \
2334 MPC8349ITXGP_config:    unconfig
2335         @mkdir -p $(obj)include
2336         @mkdir -p $(obj)board/freescale/mpc8349itx
2337         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2338         @if [ "$(findstring GP,$@)" ] ; then \
2339                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2340         fi
2341         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2342                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2343         fi
2344         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2345
2346 MPC8360EMDS_config \
2347 MPC8360EMDS_HOST_33_config \
2348 MPC8360EMDS_HOST_66_config \
2349 MPC8360EMDS_SLAVE_config \
2350 MPC8360EMDS_ATM_config: unconfig
2351         @mkdir -p $(obj)include
2352         @if [ "$(findstring _HOST_,$@)" ] ; then \
2353                 $(XECHO) -n "... PCI HOST " ; \
2354                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2355         fi ; \
2356         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2357                 $(XECHO) "...PCI SLAVE 66M"  ; \
2358                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2359                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2360         fi ; \
2361         if [ "$(findstring _33_,$@)" ] ; then \
2362                 $(XECHO) -n "...33M ..." ; \
2363                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2364                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2365         fi ; \
2366         if [ "$(findstring _66_,$@)" ] ; then \
2367                 $(XECHO) -n "...66M..." ; \
2368                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2369                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2370         fi ; \
2371         if [ "$(findstring _ATM_,$@)" ] ; then \
2372                 $(XECHO) -n "...ATM..." ; \
2373                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2374                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2375         fi ;
2376         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2377
2378 MPC8360ERDK_33_config \
2379 MPC8360ERDK_66_config \
2380 MPC8360ERDK_config:     unconfig
2381         @mkdir -p $(obj)include
2382         @if [ "$(findstring _33_,$@)" ] ; then \
2383                 $(XECHO) -n "... CLKIN 33MHz " ; \
2384                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2385         fi ;
2386         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2387
2388 MPC837XEMDS_config \
2389 MPC837XEMDS_HOST_config:        unconfig
2390         @mkdir -p $(obj)include
2391         @if [ "$(findstring _HOST_,$@)" ] ; then \
2392                 $(XECHO) -n "... PCI HOST " ; \
2393                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2394         fi ;
2395         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2396
2397 MPC837XERDB_config:     unconfig
2398         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2399
2400 MVBLM7_config: unconfig
2401         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2402
2403 sbc8349_config \
2404 sbc8349_PCI_33_config \
2405 sbc8349_PCI_66_config: unconfig
2406         @mkdir -p $(obj)include
2407         @if [ "$(findstring _PCI_,$@)" ] ; then \
2408                 $(XECHO) -n "... PCI HOST at " ; \
2409                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2410         fi ; \
2411         if [ "$(findstring _33_,$@)" ] ; then \
2412                 $(XECHO) -n "33MHz... " ; \
2413                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2414         fi ; \
2415         if [ "$(findstring _66_,$@)" ] ; then \
2416                 $(XECHO) -n "66MHz... " ; \
2417                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2418         fi ;
2419         @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349
2420
2421 SIMPC8313_LP_config \
2422 SIMPC8313_SP_config: unconfig
2423         @mkdir -p $(obj)include
2424         @mkdir -p $(obj)board/sheldon/simpc8313
2425         @if [ "$(findstring _LP_,$@)" ] ; then \
2426                 $(XECHO) -n "...Large Page NAND..." ; \
2427                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2428         fi ; \
2429         if [ "$(findstring _SP_,$@)" ] ; then \
2430                 $(XECHO) -n "...Small Page NAND..." ; \
2431                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2432         fi ;
2433         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2434         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2435
2436 TQM834x_config: unconfig
2437         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2438
2439 vme8349_config:         unconfig
2440         @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
2441
2442 #########################################################################
2443 ## MPC85xx Systems
2444 #########################################################################
2445
2446 ATUM8548_config:        unconfig
2447         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2448
2449 MPC8536DS_36BIT_config \
2450 MPC8536DS_config:       unconfig
2451         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2452
2453 MPC8540ADS_config:      unconfig
2454         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2455
2456 MPC8540EVAL_config \
2457 MPC8540EVAL_33_config \
2458 MPC8540EVAL_66_config \
2459 MPC8540EVAL_33_slave_config \
2460 MPC8540EVAL_66_slave_config:      unconfig
2461         @mkdir -p $(obj)include
2462         @if [ "$(findstring _33_,$@)" ] ; then \
2463                 $(XECHO) "... 33 MHz PCI" ; \
2464         else \
2465                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2466                 $(XECHO) "... 66 MHz PCI" ; \
2467         fi ; \
2468         if [ "$(findstring _slave_,$@)" ] ; then \
2469                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2470                 $(XECHO) " slave" ; \
2471         else \
2472                 $(XECHO) " host" ; \
2473         fi
2474         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2475
2476 MPC8560ADS_config:      unconfig
2477         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2478
2479 MPC8541CDS_legacy_config \
2480 MPC8541CDS_config:      unconfig
2481         @mkdir -p $(obj)include
2482         @if [ "$(findstring _legacy_,$@)" ] ; then \
2483                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2484                 $(XECHO) "... legacy" ; \
2485         fi
2486         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2487
2488 MPC8544DS_config:       unconfig
2489         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2490
2491 MPC8548CDS_legacy_config \
2492 MPC8548CDS_config:      unconfig
2493         @mkdir -p $(obj)include
2494         @if [ "$(findstring _legacy_,$@)" ] ; then \
2495                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2496                 $(XECHO) "... legacy" ; \
2497         fi
2498         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2499
2500 MPC8555CDS_legacy_config \
2501 MPC8555CDS_config:      unconfig
2502         @mkdir -p $(obj)include
2503         @if [ "$(findstring _legacy_,$@)" ] ; then \
2504                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2505                 $(XECHO) "... legacy" ; \
2506         fi
2507         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2508
2509 MPC8568MDS_config:      unconfig
2510         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2511
2512 MPC8569MDS_config:      unconfig
2513         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2514
2515 MPC8572DS_36BIT_config \
2516 MPC8572DS_config:       unconfig
2517         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2518
2519 P2020DS_36BIT_config \
2520 P2020DS_config:         unconfig
2521         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2522
2523 P1011RDB_config \
2524 P1020RDB_config \
2525 P2010RDB_config \
2526 P2020RDB_config:        unconfig
2527         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2528
2529 PM854_config:   unconfig
2530         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2531
2532 PM856_config:   unconfig
2533         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2534
2535 sbc8540_config \
2536 sbc8540_33_config \
2537 sbc8540_66_config:      unconfig
2538         @mkdir -p $(obj)include
2539         @if [ "$(findstring _66_,$@)" ] ; then \
2540                 echo "#define CONFIG_PCI_66"    >>$(obj)include/config.h ; \
2541                 $(XECHO) "... 66 MHz PCI" ; \
2542         else \
2543                 $(XECHO) "... 33 MHz PCI" ; \
2544         fi
2545         @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
2546
2547 sbc8548_config \
2548 sbc8548_PCI_33_config \
2549 sbc8548_PCI_66_config \
2550 sbc8548_PCI_33_PCIE_config \
2551 sbc8548_PCI_66_PCIE_config: unconfig
2552         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2553
2554 sbc8560_config \
2555 sbc8560_33_config \
2556 sbc8560_66_config:      unconfig
2557         @mkdir -p $(obj)include
2558         @if [ "$(findstring _66_,$@)" ] ; then \
2559                 echo "#define CONFIG_PCI_66"    >>$(obj)include/config.h ; \
2560                 $(XECHO) "... 66 MHz PCI" ; \
2561         else \
2562                 $(XECHO) "... 33 MHz PCI" ; \
2563         fi
2564         @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
2565
2566 socrates_config:        unconfig
2567         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2568
2569 stxgp3_config:          unconfig
2570         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2571
2572 stxssa_config           \
2573 stxssa_4M_config:       unconfig
2574         @mkdir -p $(obj)include
2575         @if [ "$(findstring _4M_,$@)" ] ; then \
2576                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2577                 $(XECHO) "... with 4 MiB flash memory" ; \
2578         fi
2579         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2580
2581 TQM8540_config          \
2582 TQM8541_config          \
2583 TQM8548_config          \
2584 TQM8548_AG_config       \
2585 TQM8548_BE_config       \
2586 TQM8555_config          \
2587 TQM8560_config:         unconfig
2588         @mkdir -p $(obj)include
2589         @BTYPE=$(@:_config=); \
2590         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2591         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2592         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2593         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2594         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2595         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2596         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2597         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2598
2599 XPEDITE5200_config:     unconfig
2600         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2601
2602 XPEDITE5370_config:     unconfig
2603         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2604
2605 #########################################################################
2606 ## MPC86xx Systems
2607 #########################################################################
2608
2609 MPC8610HPCD_config:     unconfig
2610         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2611
2612 MPC8641HPCN_36BIT_config \
2613 MPC8641HPCN_config:    unconfig
2614         @mkdir -p $(obj)include
2615         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2616                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2617                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2618         fi
2619         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2620
2621 sbc8641d_config:        unconfig
2622         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2623
2624 XPEDITE5170_config:     unconfig
2625         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2626
2627 #########################################################################
2628 ## 74xx/7xx Systems
2629 #########################################################################
2630
2631 AmigaOneG3SE_config:    unconfig
2632         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2633
2634 BAB7xx_config: unconfig
2635         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2636
2637 CPCI750_config: unconfig
2638         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2639
2640 DB64360_config: unconfig
2641         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2642
2643 DB64460_config: unconfig
2644         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2645
2646 ELPPC_config: unconfig
2647         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2648
2649 EVB64260_config \
2650 EVB64260_750CX_config:  unconfig
2651         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2652
2653 mpc7448hpc2_config:  unconfig
2654         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2655
2656 P3G4_config: unconfig
2657         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2658
2659 p3m750_config   \
2660 p3m7448_config:         unconfig
2661         @mkdir -p $(obj)include
2662         @if [ "$(findstring 750_,$@)" ] ; then \
2663                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2664         else \
2665                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2666         fi
2667         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2668
2669 PCIPPC2_config \
2670 PCIPPC6_config: unconfig
2671         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2672
2673 ppmc7xx_config: unconfig
2674         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2675
2676 ZUMA_config:    unconfig
2677         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2678
2679 #========================================================================
2680 # ARM
2681 #========================================================================
2682 #########################################################################
2683 ## StrongARM Systems
2684 #########################################################################
2685
2686 assabet_config  :       unconfig
2687         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2688
2689 dnp1110_config  :       unconfig
2690         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2691
2692 gcplus_config   :       unconfig
2693         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2694
2695 lart_config     :       unconfig
2696         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2697
2698 shannon_config  :       unconfig
2699         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2700
2701 #########################################################################
2702 ## ARM92xT Systems
2703 #########################################################################
2704
2705 #########################################################################
2706 ## Atmel AT91RM9200 Systems
2707 #########################################################################
2708
2709 at91rm9200dk_config     :       unconfig
2710         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2711
2712 at91rm9200ek_config     :       unconfig
2713         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2714
2715 cmc_pu2_config  :       unconfig
2716         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2717
2718 csb637_config   :       unconfig
2719         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2720
2721 kb9202_config   :       unconfig
2722         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2723
2724 m501sk_config   :       unconfig
2725         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2726
2727 mp2usb_config   :       unconfig
2728         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2729
2730 #########################################################################
2731 ## Atmel ARM926EJ-S Systems
2732 #########################################################################
2733
2734 afeb9260_config:        unconfig
2735         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2736
2737 at91cap9adk_config      :       unconfig
2738         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2739
2740 at91sam9260ek_nandflash_config \
2741 at91sam9260ek_dataflash_cs0_config \
2742 at91sam9260ek_dataflash_cs1_config \
2743 at91sam9260ek_config \
2744 at91sam9g20ek_nandflash_config \
2745 at91sam9g20ek_dataflash_cs0_config \
2746 at91sam9g20ek_dataflash_cs1_config \
2747 at91sam9g20ek_config    :       unconfig
2748         @mkdir -p $(obj)include
2749         @if [ "$(findstring 9g20,$@)" ] ; then \
2750                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2751                 $(XECHO) "... 9G20 Variant" ; \
2752         else \
2753                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2754         fi;
2755         @if [ "$(findstring _nandflash,$@)" ] ; then \
2756                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2757                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2758         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2759                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2760                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2761         else \
2762                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2763                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2764         fi;
2765         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2766
2767 at91sam9xeek_nandflash_config \
2768 at91sam9xeek_dataflash_cs0_config \
2769 at91sam9xeek_dataflash_cs1_config \
2770 at91sam9xeek_config     :       unconfig
2771         @mkdir -p $(obj)include
2772         @if [ "$(findstring _nandflash,$@)" ] ; then \
2773                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2774                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2775         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2776                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2777                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2778         else \
2779                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2780                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2781         fi;
2782         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2783
2784 at91sam9261ek_nandflash_config \
2785 at91sam9261ek_dataflash_cs0_config \
2786 at91sam9261ek_dataflash_cs3_config \
2787 at91sam9261ek_config \
2788 at91sam9g10ek_nandflash_config \
2789 at91sam9g10ek_dataflash_cs0_config \
2790 at91sam9g10ek_dataflash_cs3_config \
2791 at91sam9g10ek_config    :       unconfig
2792         @mkdir -p $(obj)include
2793         @if [ "$(findstring 9g10,$@)" ] ; then \
2794                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2795                 $(XECHO) "... 9G10 Variant" ; \
2796         else \
2797                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2798         fi;
2799         @if [ "$(findstring _nandflash,$@)" ] ; then \
2800                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2801                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2802         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2803                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2804                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2805         else \
2806                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2807                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2808         fi;
2809         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2810
2811 at91sam9263ek_norflash_config \
2812 at91sam9263ek_norflash_boot_config \
2813 at91sam9263ek_nandflash_config \
2814 at91sam9263ek_dataflash_config \
2815 at91sam9263ek_dataflash_cs0_config \
2816 at91sam9263ek_config    :       unconfig
2817         @mkdir -p $(obj)include
2818         @if [ "$(findstring _nandflash,$@)" ] ; then \
2819                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2820                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2821         elif [ "$(findstring norflash,$@)" ] ; then \
2822                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2823                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2824         else \
2825                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2826                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2827         fi;
2828         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2829                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2830                 $(XECHO) "... and boot from NOR FLASH" ; \
2831         fi;
2832         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2833
2834 at91sam9rlek_nandflash_config \
2835 at91sam9rlek_dataflash_config \
2836 at91sam9rlek_dataflash_cs0_config \
2837 at91sam9rlek_config     :       unconfig
2838         @mkdir -p $(obj)include
2839         @if [ "$(findstring _nandflash,$@)" ] ; then \
2840                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2841                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2842         else \
2843                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2844                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2845         fi;
2846         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2847
2848 meesc_config    :       unconfig
2849         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2850
2851 pm9261_config   :       unconfig
2852         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2853
2854 at91sam9m10g45ek_nandflash_config \
2855 at91sam9m10g45ek_dataflash_config \
2856 at91sam9m10g45ek_dataflash_cs0_config \
2857 at91sam9m10g45ek_config \
2858 at91sam9g45ekes_nandflash_config \
2859 at91sam9g45ekes_dataflash_config \
2860 at91sam9g45ekes_dataflash_cs0_config \
2861 at91sam9g45ekes_config  :       unconfig
2862         @mkdir -p $(obj)include
2863                 @if [ "$(findstring 9m10,$@)" ] ; then \
2864                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2865                 $(XECHO) "... 9M10G45 Variant" ; \
2866         else \
2867                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2868         fi;
2869
2870         @if [ "$(findstring _nandflash,$@)" ] ; then \
2871                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2872                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2873         else \
2874                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2875                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2876         fi;
2877         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2878
2879 pm9263_config   :       unconfig
2880         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2881
2882 SBC35_A9G20_NANDFLASH_config \
2883 SBC35_A9G20_EEPROM_config \
2884 SBC35_A9G20_config      :       unconfig
2885         @mkdir -p $(obj)include
2886         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2887         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2888
2889 TNY_A9G20_NANDFLASH_config \
2890 TNY_A9G20_EEPROM_config \
2891 TNY_A9G20_config \
2892 TNY_A9260_NANDFLASH_config \
2893 TNY_A9260_EEPROM_config \
2894 TNY_A9260_config        :       unconfig
2895         @mkdir -p $(obj)include
2896         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2897         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2898
2899 ########################################################################
2900 ## ARM Integrator boards - see doc/README-integrator for more info.
2901 integratorap_config     \
2902 ap_config               \
2903 ap966_config            \
2904 ap922_config            \
2905 ap922_XA10_config       \
2906 ap7_config              \
2907 ap720t_config           \
2908 ap920t_config           \
2909 ap926ejs_config         \
2910 ap946es_config: unconfig
2911         @board/armltd/integrator/split_by_variant.sh ap $@
2912
2913 integratorcp_config     \
2914 cp_config               \
2915 cp920t_config           \
2916 cp926ejs_config         \
2917 cp946es_config          \
2918 cp1136_config           \
2919 cp966_config            \
2920 cp922_config            \
2921 cp922_XA10_config       \
2922 cp1026_config: unconfig
2923         @board/armltd/integrator/split_by_variant.sh cp $@
2924
2925 davinci_dvevm_config :  unconfig
2926         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2927
2928 davinci_schmoogie_config :      unconfig
2929         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2930
2931 davinci_sffsdr_config : unconfig
2932         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2933
2934 davinci_sonata_config : unconfig
2935         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2936
2937 davinci_dm355evm_config :       unconfig
2938         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2939
2940 davinci_dm365evm_config :       unconfig
2941         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2942
2943 imx27lite_config:       unconfig
2944         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2945
2946 lpd7a400_config \
2947 lpd7a404_config:        unconfig
2948         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2949
2950 mv88f6281gtw_ge_config: unconfig
2951         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2952
2953 mx1ads_config   :       unconfig
2954         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2955
2956 mx1fs2_config   :       unconfig
2957         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2958
2959 netstar_config:         unconfig
2960         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2961
2962 nhk8815_config \
2963 nhk8815_onenand_config: unconfig
2964         @mkdir -p $(obj)include
2965         @ > $(obj)include/config.h
2966         @if [ "$(findstring _onenand, $@)" ] ; then \
2967                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2968                 $(XECHO) "... configured to boot from OneNand Flash"; \
2969         else \
2970                 $(XECHO) "... configured to boot from Nand Flash"; \
2971         fi
2972         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2973
2974 omap1510inn_config :    unconfig
2975         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2976
2977 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2978
2979 omap1610inn_config \
2980 omap1610inn_cs0boot_config \
2981 omap1610inn_cs3boot_config \
2982 omap1610inn_cs_autoboot_config \
2983 omap1610h2_config \
2984 omap1610h2_cs0boot_config \
2985 omap1610h2_cs3boot_config \
2986 omap1610h2_cs_autoboot_config:  unconfig
2987         @mkdir -p $(obj)include
2988         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
2989                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
2990                 $(XECHO) "... configured for CS0 boot"; \
2991         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
2992                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
2993                 $(XECHO) "... configured for CS_AUTO boot"; \
2994         else \
2995                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
2996                 $(XECHO) "... configured for CS3 boot"; \
2997         fi;
2998         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
2999
3000 omap5912osk_config :    unconfig
3001         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
3002
3003 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3004
3005 omap730p2_config \
3006 omap730p2_cs0boot_config \
3007 omap730p2_cs3boot_config :      unconfig
3008         @mkdir -p $(obj)include
3009         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3010                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3011                 $(XECHO) "... configured for CS0 boot"; \
3012         else \
3013                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3014                 $(XECHO) "... configured for CS3 boot"; \
3015         fi;
3016         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3017
3018 rd6281a_config: unconfig
3019         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3020
3021 sbc2410x_config: unconfig
3022         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3023
3024 scb9328_config  :       unconfig
3025         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3026
3027 sheevaplug_config: unconfig
3028         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3029
3030 smdk2400_config :       unconfig
3031         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3032
3033 smdk2410_config :       unconfig
3034         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3035
3036 SX1_stdout_serial_config \
3037 SX1_config:             unconfig
3038         @mkdir -p $(obj)include
3039         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3040                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3041                 $(XECHO) "... configured for stdout serial"; \
3042         else \
3043                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3044                 $(XECHO) "... configured for stdout usbtty"; \
3045         fi;
3046         @$(MKCONFIG) SX1 arm arm925t sx1
3047
3048 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3049 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3050
3051 trab_config \
3052 trab_bigram_config \
3053 trab_bigflash_config \
3054 trab_old_config:        unconfig
3055         @mkdir -p $(obj)include
3056         @mkdir -p $(obj)board/trab
3057         @[ -z "$(findstring _bigram,$@)" ] || \
3058                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3059                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3060                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3061                 }
3062         @[ -z "$(findstring _bigflash,$@)" ] || \
3063                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3064                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3065                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3066                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3067                 }
3068         @[ -z "$(findstring _old,$@)" ] || \
3069                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3070                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3071                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3072                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3073                 }
3074         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3075
3076 VCMA9_config    :       unconfig
3077         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3078
3079 #########################################################################
3080 # ARM supplied Versatile development boards
3081 #########################################################################
3082
3083 cm4008_config   :       unconfig
3084         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3085
3086 cm41xx_config   :       unconfig
3087         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3088
3089 versatile_config        \
3090 versatileab_config      \
3091 versatilepb_config :    unconfig
3092         @board/armltd/versatile/split_by_variant.sh $@
3093
3094 voiceblue_config:       unconfig
3095         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3096
3097 #########################################################################
3098 ## S3C44B0 Systems
3099 #########################################################################
3100
3101 B2_config       :       unconfig
3102         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3103
3104 #########################################################################
3105 ## ARM720T Systems
3106 #########################################################################
3107
3108 armadillo_config:       unconfig
3109         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3110
3111 ep7312_config   :       unconfig
3112         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3113
3114 impa7_config    :       unconfig
3115         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3116
3117 modnet50_config :       unconfig
3118         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3119
3120 evb4510_config :        unconfig
3121         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3122
3123 lpc2292sodimm_config:   unconfig
3124         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3125
3126 SMN42_config    :       unconfig
3127         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3128
3129 #########################################################################
3130 ## ARM CORTEX Systems
3131 #########################################################################
3132
3133 devkit8000_config :     unconfig
3134         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3135
3136 omap3_beagle_config :   unconfig
3137         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3138
3139 omap3_overo_config :    unconfig
3140         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3141
3142 omap3_evm_config :      unconfig
3143         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3144
3145 omap3_pandora_config :  unconfig
3146         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3147
3148 omap3_zoom1_config :    unconfig
3149         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3150
3151 omap3_zoom2_config :    unconfig
3152         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3153
3154 #########################################################################
3155 ## XScale Systems
3156 #########################################################################
3157
3158 actux1_config   :       unconfig
3159         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3160
3161 actux2_config   :       unconfig
3162         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3163
3164 actux3_config   :       unconfig
3165         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3166
3167 actux4_config   :       unconfig
3168         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3169
3170 cerf250_config :        unconfig
3171         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3172
3173 cradle_config   :       unconfig
3174         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3175
3176 csb226_config   :       unconfig
3177         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3178
3179 delta_config :  unconfig
3180         @$(MKCONFIG) $(@:_config=) arm pxa delta
3181
3182 innokom_config  :       unconfig
3183         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3184
3185 ixdp425_config  :       unconfig
3186         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3187
3188 ixdpg425_config :       unconfig
3189         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3190
3191 lubbock_config  :       unconfig
3192         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3193
3194 pleb2_config    :       unconfig
3195         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3196
3197 logodl_config   :       unconfig
3198         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3199
3200 pdnb3_config \
3201 scpu_config:    unconfig
3202         @mkdir -p $(obj)include
3203         @if [ "$(findstring scpu_,$@)" ] ; then \
3204                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3205                 $(XECHO) "... on SCPU board variant" ; \
3206         fi
3207         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3208
3209 pxa255_idp_config:      unconfig
3210         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3211
3212 polaris_config \
3213 trizepsiv_config        :       unconfig
3214         @mkdir -p $(obj)include
3215         @if [ "$(findstring polaris,$@)" ] ; then \
3216                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3217         fi;
3218         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3219
3220 wepep250_config :       unconfig
3221         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3222
3223 xaeniax_config  :       unconfig
3224         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3225
3226 xm250_config    :       unconfig
3227         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3228
3229 xsengine_config :       unconfig
3230         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3231
3232 zylonite_config :
3233         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3234
3235 #########################################################################
3236 ## ARM1136 Systems
3237 #########################################################################
3238
3239 apollon_config          : unconfig
3240         @mkdir -p $(obj)include
3241         @mkdir -p $(obj)onenand_ipl/board/apollon
3242         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3243         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3244         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3245
3246 imx31_litekit_config    : unconfig
3247         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3248
3249 imx31_phycore_eet_config \
3250 imx31_phycore_config    : unconfig
3251         @mkdir -p $(obj)include
3252         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3253                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3254         fi
3255         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3256
3257 mx31ads_config          : unconfig
3258         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3259
3260 mx31pdk_config \
3261 mx31pdk_nand_config     : unconfig
3262         @mkdir -p $(obj)include
3263         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3264                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3265         else                                                                            \
3266                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3267                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3268         fi
3269         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3270
3271 omap2420h4_config       : unconfig
3272         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3273
3274 qong_config             : unconfig
3275         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3276
3277 #########################################################################
3278 ## ARM1176 Systems
3279 #########################################################################
3280 smdk6400_noUSB_config   \
3281 smdk6400_config :       unconfig
3282         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3283         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3284         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3285         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3286                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3287                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3288         else                                                                            \
3289                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3290                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3291         fi
3292         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3293
3294 #========================================================================
3295 # i386
3296 #========================================================================
3297 #########################################################################
3298 ## AMD SC520 CDP
3299 #########################################################################
3300 eNET_config     :       unconfig
3301         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3302
3303 sc520_cdp_config        :       unconfig
3304         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3305
3306 sc520_spunk_config      :       unconfig
3307         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3308
3309 sc520_spunk_rel_config  :       unconfig
3310         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3311
3312 #========================================================================
3313 # MIPS
3314 #========================================================================
3315 #########################################################################
3316 ## MIPS32 4Kc
3317 #########################################################################
3318
3319 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3320
3321 incaip_100MHz_config    \
3322 incaip_133MHz_config    \
3323 incaip_150MHz_config    \
3324 incaip_config: unconfig
3325         @mkdir -p $(obj)include
3326         @[ -z "$(findstring _100MHz,$@)" ] || \
3327                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3328                   $(XECHO) "... with 100MHz system clock" ; \
3329                 }
3330         @[ -z "$(findstring _133MHz,$@)" ] || \
3331                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3332                   $(XECHO) "... with 133MHz system clock" ; \
3333                 }
3334         @[ -z "$(findstring _150MHz,$@)" ] || \
3335                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3336                   $(XECHO) "... with 150MHz system clock" ; \
3337                 }
3338         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3339
3340 tb0229_config: unconfig
3341         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3342
3343 vct_premium_config              \
3344 vct_premium_small_config        \
3345 vct_premium_onenand_config      \
3346 vct_premium_onenand_small_config \
3347 vct_platinum_config             \
3348 vct_platinum_small_config       \
3349 vct_platinum_onenand_config     \
3350 vct_platinum_onenand_small_config \
3351 vct_platinumavc_config          \
3352 vct_platinumavc_small_config    \
3353 vct_platinumavc_onenand_config  \
3354 vct_platinumavc_onenand_small_config: unconfig
3355         @mkdir -p $(obj)include
3356         @if [ "$(findstring _premium,$@)" ] ; then \
3357                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3358                 $(XECHO) "... on Premium board variant" ; \
3359         fi
3360         @if [ "$(findstring _platinum_,$@)" ] ; then \
3361                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3362                 $(XECHO) "... on Platinum board variant" ; \
3363         fi
3364         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3365                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3366                 $(XECHO) "... on PlatinumAVC board variant" ; \
3367         fi
3368         @if [ "$(findstring _onenand,$@)" ] ; then \
3369                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3370                 $(XECHO) "... on OneNAND board variant" ; \
3371         fi
3372         @if [ "$(findstring _small,$@)" ] ; then \
3373                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3374                 $(XECHO) "... stripped down image variant" ; \
3375         fi
3376         @$(MKCONFIG) -a vct mips mips vct micronas
3377
3378 #########################################################################
3379 ## MIPS32 AU1X00
3380 #########################################################################
3381
3382 dbau1000_config         :       unconfig
3383         @mkdir -p $(obj)include
3384         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3385         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3386
3387 dbau1100_config         :       unconfig
3388         @mkdir -p $(obj)include
3389         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3390         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3391
3392 dbau1500_config         :       unconfig
3393         @mkdir -p $(obj)include
3394         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3395         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3396
3397 dbau1550_config         :       unconfig
3398         @mkdir -p $(obj)include
3399         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3400         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3401
3402 dbau1550_el_config      :       unconfig
3403         @mkdir -p $(obj)include
3404         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3405         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3406
3407 gth2_config             :       unconfig
3408         @mkdir -p $(obj)include
3409         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3410         @$(MKCONFIG) -a gth2 mips mips gth2
3411
3412 pb1000_config           :       unconfig
3413         @mkdir -p $(obj)include
3414         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3415         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3416
3417 qemu_mips_config        : unconfig
3418         @mkdir -p $(obj)include
3419         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3420         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3421
3422 #########################################################################
3423 ## MIPS64 5Kc
3424 #########################################################################
3425
3426 purple_config :         unconfig
3427         @$(MKCONFIG) $(@:_config=) mips mips purple
3428
3429 #========================================================================
3430 # Nios
3431 #========================================================================
3432 #########################################################################
3433 ## Nios32
3434 #########################################################################
3435
3436 ADNPESC1_DNPEVA2_base_32_config \
3437 ADNPESC1_base_32_config         \
3438 ADNPESC1_config: unconfig
3439         @mkdir -p $(obj)include
3440         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3441                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3442                   $(XECHO) "... DNP/EVA2 configuration" ; \
3443                 }
3444         @[ -z "$(findstring _base_32,$@)" ] || \
3445                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3446                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3447                 }
3448         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3449                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3450                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3451                 }
3452         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3453
3454 DK1C20_safe_32_config           \
3455 DK1C20_standard_32_config       \
3456 DK1C20_config:  unconfig
3457         @mkdir -p $(obj)include
3458         @[ -z "$(findstring _safe_32,$@)" ] || \
3459                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3460                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3461                 }
3462         @[ -z "$(findstring _standard_32,$@)" ] || \
3463                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3464                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3465                 }
3466         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3467                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3468                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3469                 }
3470         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3471
3472 DK1S10_safe_32_config           \
3473 DK1S10_standard_32_config       \
3474 DK1S10_mtx_ldk_20_config        \
3475 DK1S10_config:  unconfig
3476         @mkdir -p $(obj)include
3477         @[ -z "$(findstring _safe_32,$@)" ] || \
3478                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3479                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3480                 }
3481         @[ -z "$(findstring _standard_32,$@)" ] || \
3482                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3483                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3484                 }
3485         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3486                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3487                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3488                 }
3489         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3490                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3491                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3492                 }
3493         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3494
3495 #########################################################################
3496 ## Nios-II
3497 #########################################################################
3498
3499 EP1C20_config : unconfig
3500         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3501
3502 EP1S10_config : unconfig
3503         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3504
3505 EP1S40_config : unconfig
3506         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3507
3508 PK1C20_config : unconfig
3509         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3510
3511 PCI5441_config : unconfig
3512         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3513
3514 #========================================================================
3515 ## Microblaze
3516 #========================================================================
3517
3518 microblaze-generic_config:      unconfig
3519         @mkdir -p $(obj)include
3520         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3521
3522 #========================================================================
3523 # Blackfin
3524 #========================================================================
3525
3526 # Analog Devices boards
3527 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3528         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3529
3530 # Bluetechnix tinyboards
3531 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 tcm-bf537
3532
3533 # Misc third party boards
3534 BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp
3535
3536 # I-SYST Micromodule
3537 BFIN_BOARDS += ibf-dsp561
3538
3539 $(BFIN_BOARDS:%=%_config)       : unconfig
3540         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3541
3542 $(BFIN_BOARDS):
3543         $(MAKE) $@_config
3544         $(MAKE)
3545
3546 #========================================================================
3547 # AVR32
3548 #========================================================================
3549
3550 atngw100_config :       unconfig
3551         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3552
3553 atstk1002_config        :       unconfig
3554         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3555
3556 atstk1003_config        :       unconfig
3557         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3558
3559 atstk1004_config        :       unconfig
3560         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3561
3562 atstk1006_config        :       unconfig
3563         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3564
3565 favr-32-ezkit_config    :       unconfig
3566         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3567
3568 hammerhead_config       :       unconfig
3569         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3570
3571 mimc200_config          :       unconfig
3572         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3573
3574 #========================================================================
3575 # SH3 (SuperH)
3576 #========================================================================
3577
3578 #########################################################################
3579 ## sh2 (Renesas SuperH)
3580 #########################################################################
3581 rsk7203_config: unconfig
3582         @mkdir -p $(obj)include
3583         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3584         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3585
3586 #########################################################################
3587 ## sh3 (Renesas SuperH)
3588 #########################################################################
3589
3590 mpr2_config: unconfig
3591         @mkdir -p $(obj)include
3592         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3593         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3594
3595 ms7720se_config: unconfig
3596         @mkdir -p $(obj)include
3597         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3598         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3599
3600 #########################################################################
3601 ## sh4 (Renesas SuperH)
3602 #########################################################################
3603
3604 MigoR_config :       unconfig
3605         @mkdir -p $(obj)include
3606         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3607         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3608
3609 ms7750se_config: unconfig
3610         @mkdir -p $(obj)include
3611         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3612         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3613
3614 ms7722se_config :       unconfig
3615         @mkdir -p $(obj)include
3616         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3617         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3618
3619 r2dplus_config  :   unconfig
3620         @mkdir -p $(obj)include
3621         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3622         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3623
3624 r7780mp_config: unconfig
3625         @mkdir -p $(obj)include
3626         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3627         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3628
3629 sh7763rdp_config  :   unconfig
3630         @mkdir -p $(obj)include
3631         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3632         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3633
3634 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3635 sh7785lcr_32bit_config \
3636 sh7785lcr_config  :   unconfig
3637         @mkdir -p $(obj)include
3638         @mkdir -p $(obj)board/renesas/sh7785lcr
3639         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3640         @if [ "$(findstring 32bit, $@)" ] ; then \
3641                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3642                 echo "TEXT_BASE = 0x8ff80000" > \
3643                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3644                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3645         fi
3646         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3647
3648 ap325rxa_config  :   unconfig
3649         @mkdir -p $(obj)include
3650         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3651         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3652
3653 espt_config  :   unconfig
3654         @mkdir -p $(obj)include
3655         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3656         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3657
3658 #========================================================================
3659 # SPARC
3660 #========================================================================
3661
3662 #########################################################################
3663 ## LEON3
3664 #########################################################################
3665
3666 # Gaisler GR-XC3S-1500 board
3667 gr_xc3s_1500_config : unconfig
3668         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3669
3670 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3671 gr_cpci_ax2000_config : unconfig
3672         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3673
3674 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3675 # Development board Stratix II edition, FPGA Device EP2S60.
3676 gr_ep2s60_config: unconfig
3677         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3678
3679 # Gaisler LEON3 GRSIM simulator
3680 grsim_config : unconfig
3681         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3682
3683 #########################################################################
3684 ## LEON2
3685 #########################################################################
3686
3687 # Gaisler LEON2 GRSIM simulator
3688 grsim_leon2_config : unconfig
3689         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3690
3691 #########################################################################
3692 #########################################################################
3693 #########################################################################
3694
3695 clean:
3696         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3697                $(obj)examples/standalone/atmel_df_pow2                    \
3698                $(obj)examples/standalone/eepro100_eeprom                  \
3699                $(obj)examples/standalone/hello_world                      \
3700                $(obj)examples/standalone/interrupt                        \
3701                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3702                $(obj)examples/standalone/sched                            \
3703                $(obj)examples/standalone/smc91111_eeprom                  \
3704                $(obj)examples/standalone/test_burst                       \
3705                $(obj)examples/standalone/timer
3706         @rm -f $(obj)examples/api/demo{,.bin}
3707         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3708                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3709                $(obj)tools/envcrc                                         \
3710                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3711                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3712                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3713                $(obj)tools/ncb             $(obj)tools/ubsha1
3714         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3715                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3716                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3717                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3718                $(obj)lib_blackfin/u-boot.lds                              \
3719                $(obj)u-boot.lds                                           \
3720                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3721         @rm -f $(obj)include/bmp_logo.h
3722         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3723         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
3724         @rm -f $(obj)onenand_ipl/u-boot.lds
3725         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3726         @find $(OBJTREE) -type f \
3727                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3728                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3729                 | xargs rm -f
3730
3731 clobber:        clean
3732         @find $(OBJTREE) -type f \( -name .depend \
3733                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3734                 -print0 \
3735                 | xargs -0 rm -f
3736         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3737                 $(obj)cscope.* $(obj)*.*~
3738         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3739         @rm -f $(obj)u-boot.kwb
3740         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3741         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3742         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3743         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3744         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3745
3746 ifeq ($(OBJTREE),$(SRCTREE))
3747 mrproper \
3748 distclean:      clobber unconfig
3749 else
3750 mrproper \
3751 distclean:      clobber unconfig
3752         rm -rf $(obj)*
3753 endif
3754
3755 backup:
3756         F=`basename $(TOPDIR)` ; cd .. ; \
3757         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3758
3759 #########################################################################