Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 11
  26 SUBLEVEL =
  27 EXTRAVERSION =
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 endif
 234 ifeq ($(CPU),mpc86xx)
 235 LIBS += cpu/mpc8xxx/ddr/libddr.a
 236 LIBS += cpu/mpc8xxx/lib8xxx.a
 237 endif
 238 LIBS += drivers/rtc/librtc.a
 239 LIBS += drivers/serial/libserial.a
 240 LIBS += drivers/twserial/libtws.a
 241 LIBS += drivers/usb/gadget/libusb_gadget.a
 242 LIBS += drivers/usb/host/libusb_host.a
 243 LIBS += drivers/usb/musb/libusb_musb.a
 244 LIBS += drivers/usb/phy/libusb_phy.a
 245 LIBS += drivers/video/libvideo.a
 246 LIBS += drivers/watchdog/libwatchdog.a
 247 LIBS += common/libcommon.a
 248 LIBS += libfdt/libfdt.a
 249 LIBS += api/libapi.a
 250 LIBS += post/libpost.a
 251
 252 LIBS := $(addprefix $(obj),$(LIBS))
 253 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 254
 255 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 256 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 257
 258 # Add GCC lib
 259 ifdef USE_PRIVATE_LIBGCC
 260 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 261 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 262 else
 263 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 264 endif
 265 else
 266 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 267 endif
 268 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 269 export PLATFORM_LIBS
 270
 271 # Special flags for CPP when processing the linker script.
 272 # Pass the version down so we can handle backwards compatibility
 273 # on the fly.
 274 LDPPFLAGS += \
 275         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 276         $(shell $(LD) --version | \
 277           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 278
 279 ifeq ($(CONFIG_NAND_U_BOOT),y)
 280 NAND_SPL = nand_spl
 281 U_BOOT_NAND = $(obj)u-boot-nand.bin
 282 endif
 283
 284 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 285 ONENAND_IPL = onenand_ipl
 286 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 287 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 288 endif
 289
 290 __OBJS := $(subst $(obj),,$(OBJS))
 291 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 292
 293 #########################################################################
 294 #########################################################################
 295
 296 # Always append ALL so that arch config.mk's can add custom ones
 297 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 298
 299 all:            $(ALL)
 300
 301 $(obj)u-boot.hex:       $(obj)u-boot
 302                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 303
 304 $(obj)u-boot.srec:      $(obj)u-boot
 305                 $(OBJCOPY) -O srec $< $@
 306
 307 $(obj)u-boot.bin:       $(obj)u-boot
 308                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 309
 310 $(obj)u-boot.ldr:       $(obj)u-boot
 311                 $(CREATE_LDR_ENV)
 312                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 313
 314 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 315                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 316
 317 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 318                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 319
 320 $(obj)u-boot.img:       $(obj)u-boot.bin
 321                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 322                 -a $(TEXT_BASE) -e 0 \
 323                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 324                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 325                 -d $< $@
 326
 327 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 328                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 329                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 330
 331 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 332                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 333
 334 $(obj)u-boot.dis:       $(obj)u-boot
 335                 $(OBJDUMP) -d $< > $@
 336
 337 GEN_UBOOT = \
 338                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 339                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 340                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 341                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 342                         -Map u-boot.map -o u-boot
 343 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 344                 $(GEN_UBOOT)
 345 ifeq ($(CONFIG_KALLSYMS),y)
 346                 smap=`$(call SYSTEM_MAP,u-boot) | \
 347                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 348                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 349                         -c common/system_map.c -o $(obj)common/system_map.o
 350                 $(GEN_UBOOT) $(obj)common/system_map.o
 351 endif
 352
 353 $(OBJS):        depend
 354                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 355
 356 $(LIBS):        depend $(SUBDIRS)
 357                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 358
 359 $(LIBBOARD):    depend $(LIBS)
 360                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 361
 362 $(SUBDIRS):     depend
 363                 $(MAKE) -C $@ all
 364
 365 $(LDSCRIPT):    depend
 366                 $(MAKE) -C $(dir $@) $(notdir $@)
 367
 368 $(obj)u-boot.lds: $(LDSCRIPT)
 369                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 370
 371 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 372                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 373
 374 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 375                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 376
 377 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 378                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 379
 380 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 381                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 382
 383 $(VERSION_FILE):
 384                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 385                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 386                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 387
 388 $(TIMESTAMP_FILE):
 389                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 390                 @date +'#define U_BOOT_TIME "%T"' >> $@
 391
 392 gdbtools:
 393                 $(MAKE) -C tools/gdb all || exit 1
 394
 395 updater:
 396                 $(MAKE) -C tools/updater all || exit 1
 397
 398 env:
 399                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 400
 401 # Explicitly make _depend in subdirs containing multiple targets to prevent
 402 # parallel sub-makes creating .depend files simultaneously.
 403 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 404                 for dir in $(SUBDIRS) cpu/$(CPU) $(dir $(LDSCRIPT)) ; do \
 405                         $(MAKE) -C $$dir _depend ; done
 406
 407 TAG_SUBDIRS = $(SUBDIRS)
 408 TAG_SUBDIRS += $(dir $(__LIBS))
 409 TAG_SUBDIRS += include
 410
 411 tags ctags:
 412                 ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
 413                                                 -name '*.[chS]' -print`
 414
 415 etags:
 416                 etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
 417                                                 -name '*.[chS]' -print`
 418 cscope:
 419                 find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
 420                 cscope -b -q -k
 421
 422 SYSTEM_MAP = \
 423                 $(NM) $1 | \
 424                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 425                 LC_ALL=C sort
 426 $(obj)System.map:       $(obj)u-boot
 427                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 428
 429 #
 430 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 431 #
 432 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 433 # the dep file is only include in this top level makefile to determine when
 434 # to regenerate the autoconf.mk file.
 435 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 436         @$(XECHO) Generating $@ ; \
 437         set -e ; \
 438         : Generate the dependancies ; \
 439         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 440                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 441
 442 $(obj)include/autoconf.mk: $(obj)include/config.h
 443         @$(XECHO) Generating $@ ; \
 444         set -e ; \
 445         : Extract the config macros ; \
 446         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 447                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 448         mv $@.tmp $@
 449
 450 #########################################################################
 451 else    # !config.mk
 452 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 453 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 454 $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 455 dep tags ctags etags cscope $(obj)System.map:
 456         @echo "System not configured - see README" >&2
 457         @ exit 1
 458 endif   # config.mk
 459
 460 .PHONY : CHANGELOG
 461 CHANGELOG:
 462         git log --no-merges U-Boot-1_1_5.. | \
 463         unexpand -a | sed -e 's/\s\s*$$//' > $@
 464
 465 include/license.h: tools/bin2header COPYING
 466          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 467 #########################################################################
 468
 469 unconfig:
 470         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 471                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 472                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 473
 474 %: %_config
 475         $(MAKE)
 476
 477 #========================================================================
 478 # PowerPC
 479 #========================================================================
 480
 481 #########################################################################
 482 ## MPC5xx Systems
 483 #########################################################################
 484
 485 canmb_config:   unconfig
 486         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 487
 488 cmi_mpc5xx_config:      unconfig
 489         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 490
 491 PATI_config:            unconfig
 492         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 493
 494 #########################################################################
 495 ## MPC5xxx Systems
 496 #########################################################################
 497
 498 aev_config: unconfig
 499         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 500
 501 BC3450_config:  unconfig
 502         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 503
 504 cm5200_config:  unconfig
 505         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 506
 507 cpci5200_config:  unconfig
 508         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 509
 510 digsy_mtc_config \
 511 digsy_mtc_LOWBOOT_config        \
 512 digsy_mtc_RAMBOOT_config:       unconfig
 513         @mkdir -p $(obj)include
 514         @mkdir -p $(obj)board/digsy_mtc
 515         @ >$(obj)include/config.h
 516         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 517                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 518                   echo "... with LOWBOOT configuration" ; \
 519                 }
 520         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 521                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 522                   echo "... with RAMBOOT configuration" ; \
 523                 }
 524         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 525
 526 galaxy5200_LOWBOOT_config \
 527 galaxy5200_config:      unconfig
 528         @mkdir -p $(obj)include
 529         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 530         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 531
 532 hmi1001_config: unconfig
 533         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 534
 535 Lite5200_config                         \
 536 Lite5200_LOWBOOT_config                 \
 537 Lite5200_LOWBOOT08_config               \
 538 icecube_5200_config                     \
 539 icecube_5200_LOWBOOT_config             \
 540 icecube_5200_LOWBOOT08_config           \
 541 icecube_5200_DDR_config                 \
 542 icecube_5200_DDR_LOWBOOT_config         \
 543 icecube_5200_DDR_LOWBOOT08_config       \
 544 icecube_5100_config:                    unconfig
 545         @mkdir -p $(obj)include
 546         @mkdir -p $(obj)board/icecube
 547         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 548                 { if [ "$(findstring DDR,$@)" ] ; \
 549                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 550                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 551                   fi ; \
 552                   $(XECHO) "... with LOWBOOT configuration" ; \
 553                 }
 554         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 555                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 556                   echo "... with 8 MB flash only" ; \
 557                   $(XECHO) "... with LOWBOOT configuration" ; \
 558                 }
 559         @[ -z "$(findstring DDR,$@)" ] || \
 560                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 561                   $(XECHO) "... DDR memory revision" ; \
 562                 }
 563         @[ -z "$(findstring 5200,$@)" ] || \
 564                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 565                   $(XECHO) "... with MPC5200 processor" ; \
 566                 }
 567         @[ -z "$(findstring 5100,$@)" ] || \
 568                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 569                   $(XECHO) "... with MGT5100 processor" ; \
 570                 }
 571         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 572
 573 jupiter_config: unconfig
 574         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 575
 576 inka4x0_config: unconfig
 577         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 578
 579 ipek01_config: unconfig
 580         @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
 581
 582 lite5200b_config        \
 583 lite5200b_PM_config     \
 584 lite5200b_LOWBOOT_config:       unconfig
 585         @mkdir -p $(obj)include
 586         @mkdir -p $(obj)board/icecube
 587         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 588         @ $(XECHO) "... DDR memory revision"
 589         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 590         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 591         @[ -z "$(findstring _PM_,$@)" ] || \
 592                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 593                   $(XECHO) "... with power management (low-power mode) support" ; \
 594                 }
 595         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 596                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 597                   $(XECHO) "... with LOWBOOT configuration" ; \
 598                 }
 599         @ $(XECHO) "... with MPC5200B processor"
 600         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 601
 602 mcc200_config   \
 603 mcc200_SDRAM_config     \
 604 mcc200_highboot_config  \
 605 mcc200_COM12_config     \
 606 mcc200_COM12_SDRAM_config       \
 607 mcc200_COM12_highboot_config    \
 608 mcc200_COM12_highboot_SDRAM_config      \
 609 mcc200_highboot_SDRAM_config    \
 610 prs200_config   \
 611 prs200_DDR_config       \
 612 prs200_highboot_config  \
 613 prs200_highboot_DDR_config:     unconfig
 614         @mkdir -p $(obj)include
 615         @mkdir -p $(obj)board/mcc200
 616         @[ -n "$(findstring highboot,$@)" ] || \
 617                 { $(XECHO) "... with lowboot configuration" ; \
 618                 }
 619         @[ -z "$(findstring highboot,$@)" ] || \
 620                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 621                   $(XECHO) "... with highboot configuration" ; \
 622                 }
 623         @[ -n "$(findstring _SDRAM,$@)" ] || \
 624                 { if [ -n "$(findstring mcc200,$@)" ]; \
 625                   then \
 626                         $(XECHO) "... with DDR" ; \
 627                   else \
 628                         if [ -n "$(findstring _DDR,$@)" ];\
 629                         then \
 630                                 $(XECHO) "... with DDR" ; \
 631                         else \
 632                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 633                                 $(XECHO) "... with SDRAM" ; \
 634                         fi; \
 635                   fi; \
 636                 }
 637         @[ -z "$(findstring _SDRAM,$@)" ] || \
 638                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 639                   $(XECHO) "... with SDRAM" ; \
 640                 }
 641         @[ -z "$(findstring COM12,$@)" ] || \
 642                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 643                   $(XECHO) "... with console on COM12" ; \
 644                 }
 645         @[ -z "$(findstring prs200,$@)" ] || \
 646                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 647                 }
 648         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 649
 650 mecp5200_config:  unconfig
 651         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 652
 653 motionpro_config:       unconfig
 654         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 655
 656 mucmc52_config:         unconfig
 657         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 658
 659 munices_config: unconfig
 660         @$(MKCONFIG) munices ppc mpc5xxx munices
 661
 662 MVBC_P_config: unconfig
 663         @mkdir -p $(obj)include
 664         @mkdir -p $(obj)board/mvbc_p
 665         @ >$(obj)include/config.h
 666         @[ -z "$(findstring MVBC_P,$@)" ] || \
 667         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 668         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 669
 670 o2dnt_config:   unconfig
 671         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 672
 673 pcm030_config \
 674 pcm030_LOWBOOT_config:  unconfig
 675         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 676         @ >$(obj)include/config.h
 677         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 678                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 679                   echo "... with LOWBOOT configuration" ; \
 680                 }
 681         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 682
 683 pf5200_config:  unconfig
 684         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 685
 686 PM520_config \
 687 PM520_DDR_config \
 688 PM520_ROMBOOT_config \
 689 PM520_ROMBOOT_DDR_config:       unconfig
 690         @mkdir -p $(obj)include
 691         @[ -z "$(findstring DDR,$@)" ] || \
 692                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 693                   $(XECHO) "... DDR memory revision" ; \
 694                 }
 695         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 696                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 697                   $(XECHO) "... booting from 8-bit flash" ; \
 698                 }
 699         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 700
 701 smmaco4_config: unconfig
 702         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 703
 704 spieval_config: unconfig
 705         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 706
 707 TB5200_B_config \
 708 TB5200_config:  unconfig
 709         @mkdir -p $(obj)include
 710         @[ -z "$(findstring _B,$@)" ] || \
 711                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 712                   $(XECHO) "... with MPC5200B processor" ; \
 713                 }
 714         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 715
 716 MINI5200_config \
 717 EVAL5200_config \
 718 TOP5200_config: unconfig
 719         @mkdir -p $(obj)include
 720         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 721         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 722
 723 Total5100_config                \
 724 Total5200_config                \
 725 Total5200_lowboot_config        \
 726 Total5200_Rev2_config           \
 727 Total5200_Rev2_lowboot_config:  unconfig
 728         @mkdir -p $(obj)include
 729         @mkdir -p $(obj)board/total5200
 730         @[ -z "$(findstring 5100,$@)" ] || \
 731                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 732                   $(XECHO) "... with MGT5100 processor" ; \
 733                 }
 734         @[ -z "$(findstring 5200,$@)" ] || \
 735                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 736                   $(XECHO) "... with MPC5200 processor" ; \
 737                 }
 738         @[ -n "$(findstring Rev,$@)" ] || \
 739                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 740                   $(XECHO) "... revision 1 board" ; \
 741                 }
 742         @[ -z "$(findstring Rev2_,$@)" ] || \
 743                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 744                   $(XECHO) "... revision 2 board" ; \
 745                 }
 746         @[ -z "$(findstring lowboot_,$@)" ] || \
 747                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 748                   $(XECHO) "... with lowboot configuration" ; \
 749                 }
 750         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 751
 752 cam5200_config \
 753 cam5200_niosflash_config \
 754 fo300_config \
 755 MiniFAP_config \
 756 TQM5200S_config \
 757 TQM5200S_HIGHBOOT_config \
 758 TQM5200_B_config \
 759 TQM5200_B_HIGHBOOT_config \
 760 TQM5200_config  \
 761 TQM5200_STK100_config:  unconfig
 762         @mkdir -p $(obj)include
 763         @mkdir -p $(obj)board/tqc/tqm5200
 764         @[ -z "$(findstring cam5200,$@)" ] || \
 765                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 766                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 767                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 768                   $(XECHO) "... TQM5200S on Cam5200" ; \
 769                 }
 770         @[ -z "$(findstring niosflash,$@)" ] || \
 771                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 772                   $(XECHO) "... with NIOS flash driver" ; \
 773                 }
 774         @[ -z "$(findstring fo300,$@)" ] || \
 775                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 776                   $(XECHO) "... TQM5200 on FO300" ; \
 777                 }
 778         @[ -z "$(findstring MiniFAP,$@)" ] || \
 779                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 780                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 781                 }
 782         @[ -z "$(findstring STK100,$@)" ] || \
 783                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 784                   $(XECHO) "... on a STK52XX.100 base board" ; \
 785                 }
 786         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 787                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 788                 }
 789         @[ -z "$(findstring TQM5200S,$@)" ] || \
 790                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 791                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 792                 }
 793         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 794                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 795                 }
 796         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 797
 798 uc101_config:           unconfig
 799         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 800
 801 v38b_config: unconfig
 802         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 803
 804 #########################################################################
 805 ## MPC512x Systems
 806 #########################################################################
 807
 808 aria_config:    unconfig
 809         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 810
 811 mecp5123_config:        unconfig
 812         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 813
 814 mpc5121ads_config \
 815 mpc5121ads_rev2_config  \
 816         : unconfig
 817         @mkdir -p $(obj)include
 818         @if [ "$(findstring rev2,$@)" ] ; then \
 819                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 820         fi
 821         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 822
 823 #########################################################################
 824 ## MPC8xx Systems
 825 #########################################################################
 826
 827 Adder_config    \
 828 Adder87x_config \
 829 AdderII_config  \
 830         :               unconfig
 831         @mkdir -p $(obj)include
 832         $(if $(findstring AdderII,$@), \
 833         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 834         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 835
 836 AdderUSB_config:        unconfig
 837         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 838
 839 ADS860_config     \
 840 FADS823_config    \
 841 FADS850SAR_config \
 842 MPC86xADS_config  \
 843 MPC885ADS_config  \
 844 FADS860T_config:        unconfig
 845         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 846
 847 AMX860_config   :       unconfig
 848         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 849
 850 c2mon_config:           unconfig
 851         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 852
 853 CCM_config:             unconfig
 854         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 855
 856 cogent_mpc8xx_config:   unconfig
 857         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 858
 859 ELPT860_config:         unconfig
 860         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 861
 862 EP88x_config:           unconfig
 863         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 864
 865 ESTEEM192E_config:      unconfig
 866         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 867
 868 ETX094_config   :       unconfig
 869         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 870
 871 FLAGADM_config: unconfig
 872         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 873
 874 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 875
 876 GEN860T_SC_config       \
 877 GEN860T_config: unconfig
 878         @mkdir -p $(obj)include
 879         @[ -z "$(findstring _SC,$@)" ] || \
 880                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 881                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 882                 }
 883         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 884
 885 GENIETV_config: unconfig
 886         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 887
 888 GTH_config:     unconfig
 889         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 890
 891 hermes_config   :       unconfig
 892         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 893
 894 HMI10_config    :       unconfig
 895         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 896
 897 IAD210_config: unconfig
 898         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 899
 900 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 901
 902 ICU862_100MHz_config    \
 903 ICU862_config: unconfig
 904         @mkdir -p $(obj)include
 905         @[ -z "$(findstring _100MHz,$@)" ] || \
 906                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 907                   $(XECHO) "... with 100MHz system clock" ; \
 908                 }
 909         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 910
 911 IP860_config    :       unconfig
 912         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 913
 914 IVML24_256_config \
 915 IVML24_128_config \
 916 IVML24_config:  unconfig
 917         @mkdir -p $(obj)include
 918         @[ -z "$(findstring IVML24_config,$@)" ] || \
 919                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 920                  }
 921         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 922                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 923                  }
 924         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 925                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 926                  }
 927         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 928
 929 IVMS8_256_config \
 930 IVMS8_128_config \
 931 IVMS8_config:   unconfig
 932         @mkdir -p $(obj)include
 933         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 934                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 935                  }
 936         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 937                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 938                  }
 939         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 940                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 941                  }
 942         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 943
 944 kmsupx4_config:         unconfig
 945         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 946
 947 KUP4K_config    :       unconfig
 948         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 949
 950 KUP4X_config    :       unconfig
 951         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 952
 953 LANTEC_config   :       unconfig
 954         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 955
 956 lwmon_config:           unconfig
 957         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 958
 959 MBX_config      \
 960 MBX860T_config: unconfig
 961         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 962
 963 mgsuvd_config:          unconfig
 964         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 965
 966 MHPC_config:            unconfig
 967         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 968
 969 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 970
 971 NETVIA_V2_config \
 972 NETVIA_config:          unconfig
 973         @mkdir -p $(obj)include
 974         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 975                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
 976                   $(XECHO) "... Version 1" ; \
 977                  }
 978         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
 979                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
 980                   $(XECHO) "... Version 2" ; \
 981                  }
 982         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 983
 984 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
 985
 986 NETPHONE_V2_config \
 987 NETPHONE_config:        unconfig
 988         @mkdir -p $(obj)include
 989         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
 990                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
 991                  }
 992         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
 993                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
 994                  }
 995         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
 996
 997 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
 998
 999 NETTA_ISDN_6412_SWAPHOOK_config \
1000 NETTA_ISDN_SWAPHOOK_config \
1001 NETTA_6412_SWAPHOOK_config \
1002 NETTA_SWAPHOOK_config \
1003 NETTA_ISDN_6412_config \
1004 NETTA_ISDN_config \
1005 NETTA_6412_config \
1006 NETTA_config:           unconfig
1007         @mkdir -p $(obj)include
1008         @[ -z "$(findstring ISDN_,$@)" ] || \
1009                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1010                  }
1011         @[ -n "$(findstring ISDN_,$@)" ] || \
1012                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1013                  }
1014         @[ -z "$(findstring 6412_,$@)" ] || \
1015                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1016                  }
1017         @[ -n "$(findstring 6412_,$@)" ] || \
1018                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1019                  }
1020         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1021                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1022                  }
1023         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1024                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1025                  }
1026         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1027
1028 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1029
1030 NETTA2_V2_config \
1031 NETTA2_config:          unconfig
1032         @mkdir -p $(obj)include
1033         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1034                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1035                  }
1036         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1037                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1038                  }
1039         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1040
1041 NC650_Rev1_config \
1042 NC650_Rev2_config \
1043 CP850_config:   unconfig
1044         @mkdir -p $(obj)include
1045         @[ -z "$(findstring CP850,$@)" ] || \
1046                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1047                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1048                  }
1049         @[ -z "$(findstring Rev1,$@)" ] || \
1050                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1051                  }
1052         @[ -z "$(findstring Rev2,$@)" ] || \
1053                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1054                  }
1055         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1056
1057 NX823_config:           unconfig
1058         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1059
1060 pcu_e_config:           unconfig
1061         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1062
1063 QS850_config:   unconfig
1064         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1065
1066 QS823_config:   unconfig
1067         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1068
1069 QS860T_config:  unconfig
1070         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1071
1072 quantum_config: unconfig
1073         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1074
1075 R360MPI_config: unconfig
1076         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1077
1078 RBC823_config:  unconfig
1079         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1080
1081 RPXClassic_config:      unconfig
1082         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1083
1084 RPXlite_config:         unconfig
1085         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1086
1087 RPXlite_DW_64_config            \
1088 RPXlite_DW_LCD_config           \
1089 RPXlite_DW_64_LCD_config        \
1090 RPXlite_DW_NVRAM_config         \
1091 RPXlite_DW_NVRAM_64_config      \
1092 RPXlite_DW_NVRAM_LCD_config     \
1093 RPXlite_DW_NVRAM_64_LCD_config  \
1094 RPXlite_DW_config:      unconfig
1095         @mkdir -p $(obj)include
1096         @[ -z "$(findstring _64,$@)" ] || \
1097                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1098                   $(XECHO) "... with 64MHz system clock ..."; \
1099                 }
1100         @[ -z "$(findstring _LCD,$@)" ] || \
1101                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1102                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1103                   $(XECHO) "... with LCD display ..."; \
1104                 }
1105         @[ -z "$(findstring _NVRAM,$@)" ] || \
1106                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1107                   $(XECHO) "... with ENV in NVRAM ..."; \
1108                 }
1109         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1110
1111 rmu_config:     unconfig
1112         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1113
1114 RRvision_config:        unconfig
1115         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1116
1117 RRvision_LCD_config:    unconfig
1118         @mkdir -p $(obj)include
1119         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1120         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1121         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1122
1123 SM850_config    :       unconfig
1124         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1125
1126 spc1920_config:         unconfig
1127         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1128
1129 SPD823TS_config:        unconfig
1130         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1131
1132 stxxtc_config:  unconfig
1133         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1134
1135 svm_sc8xx_config:       unconfig
1136         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1137
1138 SXNI855T_config:        unconfig
1139         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1140
1141 # EMK MPC8xx based modules
1142 TOP860_config:          unconfig
1143         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1144
1145 # Play some tricks for configuration selection
1146 # Only 855 and 860 boards may come with FEC
1147 # and only 823 boards may have LCD support
1148 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1149
1150 FPS850L_config          \
1151 FPS860L_config          \
1152 NSCU_config             \
1153 TQM823L_config          \
1154 TQM823L_LCD_config      \
1155 TQM850L_config          \
1156 TQM855L_config          \
1157 TQM860L_config          \
1158 TQM862L_config          \
1159 TQM823M_config          \
1160 TQM850M_config          \
1161 TQM855M_config          \
1162 TQM860M_config          \
1163 TQM862M_config          \
1164 TQM866M_config          \
1165 TQM885D_config          \
1166 TK885D_config           \
1167 virtlab2_config:        unconfig
1168         @mkdir -p $(obj)include
1169         @[ -z "$(findstring _LCD,$@)" ] || \
1170                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1171                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1172                   $(XECHO) "... with LCD display" ; \
1173                 }
1174         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1175
1176 TTTech_config:  unconfig
1177         @mkdir -p $(obj)include
1178         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1179         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1180         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1181
1182 uc100_config    :       unconfig
1183         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1184
1185 v37_config:     unconfig
1186         @mkdir -p $(obj)include
1187         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1188         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1189         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1190
1191 wtk_config:     unconfig
1192         @mkdir -p $(obj)include
1193         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1194         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1195         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1196
1197 #########################################################################
1198 ## PPC4xx Systems
1199 #########################################################################
1200 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1201
1202 acadia_config:  unconfig
1203         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1204
1205 acadia_nand_config:     unconfig
1206         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1207         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1208         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1209         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1210         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1211         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1212
1213 ADCIOP_config:  unconfig
1214         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1215
1216 alpr_config:    unconfig
1217         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1218
1219 AP1000_config:unconfig
1220         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1221
1222 APC405_config:  unconfig
1223         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1224
1225 AR405_config:   unconfig
1226         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1227
1228 ASH405_config:  unconfig
1229         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1230
1231 bamboo_config:  unconfig
1232         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1233
1234 bamboo_nand_config:     unconfig
1235         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1236         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1237         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1238         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1239         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1240         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1241
1242 bubinga_config: unconfig
1243         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1244
1245 CANBT_config:   unconfig
1246         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1247
1248 # Arches, Canyonlands & Glacier use different U-Boot images
1249 arches_config \
1250 canyonlands_config \
1251 glacier_config: unconfig
1252         @mkdir -p $(obj)include
1253         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1254                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1255         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1256
1257 canyonlands_nand_config \
1258 glacier_nand_config:    unconfig
1259         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1260         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1261         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1262         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1263                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1264         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1265         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1266         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1267
1268 CATcenter_config        \
1269 CATcenter_25_config     \
1270 CATcenter_33_config:    unconfig
1271         @mkdir -p $(obj)include
1272         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1273         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1274         @[ -z "$(findstring _25,$@)" ] || \
1275                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1276                   $(XECHO) "SysClk = 25MHz" ; \
1277                 }
1278         @[ -z "$(findstring _33,$@)" ] || \
1279                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1280                   $(XECHO) "SysClk = 33MHz" ; \
1281                 }
1282         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1283
1284 CMS700_config:  unconfig
1285         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1286
1287 CPCI2DP_config: unconfig
1288         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1289
1290 CPCI405_config          \
1291 CPCI4052_config         \
1292 CPCI405DT_config        \
1293 CPCI405AB_config:       unconfig
1294         @mkdir -p $(obj)board/esd/cpci405
1295         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1296
1297 CPCIISER4_config:       unconfig
1298         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1299
1300 CRAYL1_config:  unconfig
1301         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1302
1303 csb272_config:  unconfig
1304         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1305
1306 csb472_config:  unconfig
1307         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1308
1309 DASA_SIM_config: unconfig
1310         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1311
1312 dlvision_config: unconfig
1313         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1314
1315 DP405_config:   unconfig
1316         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1317
1318 DU405_config:   unconfig
1319         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1320
1321 DU440_config:   unconfig
1322         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1323
1324 ebony_config:   unconfig
1325         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1326
1327 ERIC_config:    unconfig
1328         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1329
1330 EXBITGEN_config:        unconfig
1331         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1332
1333 fx12mm_flash_config: unconfig
1334         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1335         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1336         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1337                 > $(obj)board/avnet/fx12mm/config.tmp
1338         @echo "TEXT_BASE := 0xFFCB0000" \
1339                 >> $(obj)board/avnet/fx12mm/config.tmp
1340         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1341
1342 fx12mm_config: unconfig
1343         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1344         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1345         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1346                 > $(obj)board/avnet/fx12mm/config.tmp
1347         @echo "TEXT_BASE := 0x03000000" \
1348                 >> $(obj)board/avnet/fx12mm/config.tmp
1349         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1350
1351 G2000_config:   unconfig
1352         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1353
1354 gdppc440etx_config:     unconfig
1355         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1356
1357 hcu4_config:    unconfig
1358         @mkdir -p $(obj)board/netstal/common
1359         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1360
1361 hcu5_config:    unconfig
1362         @mkdir -p $(obj)board/netstal/common
1363         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1364
1365 HH405_config:   unconfig
1366         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1367
1368 HUB405_config:  unconfig
1369         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1370
1371 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1372 intip_config \
1373 devconcenter_config:    unconfig
1374         @mkdir -p $(obj)include
1375         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1376                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1377         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1378
1379 JSE_config:     unconfig
1380         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1381
1382 KAREF_config: unconfig
1383         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1384
1385 katmai_config:  unconfig
1386         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1387
1388 # Kilauea & Haleakala images are identical (recognized via PVR)
1389 kilauea_config \
1390 haleakala_config: unconfig
1391         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1392
1393 kilauea_nand_config \
1394 haleakala_nand_config: unconfig
1395         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1396         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1397         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1398         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1399         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1400         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1401
1402 korat_config:   unconfig
1403         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1404
1405 luan_config:    unconfig
1406         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1407
1408 lwmon5_config:  unconfig
1409         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1410
1411 makalu_config:  unconfig
1412         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1413
1414 mcu25_config:  unconfig
1415         @mkdir -p $(obj)board/netstal/common
1416         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1417
1418 METROBOX_config: unconfig
1419         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1420
1421 MIP405_config:  unconfig
1422         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1423
1424 MIP405T_config: unconfig
1425         @mkdir -p $(obj)include
1426         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1427         @$(XECHO) "Enable subset config for MIP405T"
1428         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1429
1430 ML2_config:     unconfig
1431         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1432
1433 ml300_config:   unconfig
1434         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1435
1436 ml507_flash_config: unconfig
1437         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1438         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1439         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1440                 > $(obj)board/xilinx/ml507/config.tmp
1441         @echo "TEXT_BASE := 0xFE360000" \
1442                 >> $(obj)board/xilinx/ml507/config.tmp
1443         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1444
1445 ml507_config: unconfig
1446         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1447         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1448         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1449                 > $(obj)board/xilinx/ml507/config.tmp
1450         @echo "TEXT_BASE := 0x04000000"  \
1451                 >> $(obj)board/xilinx/ml507/config.tmp
1452         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1453
1454 neo_config:     unconfig
1455         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1456
1457 ocotea_config:  unconfig
1458         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1459
1460 OCRTC_config            \
1461 ORSG_config:    unconfig
1462         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1463
1464 p3p440_config:  unconfig
1465         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1466
1467 PCI405_config:  unconfig
1468         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1469
1470 pcs440ep_config:        unconfig
1471         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1472
1473 PIP405_config:  unconfig
1474         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1475
1476 PLU405_config:  unconfig
1477         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1478
1479 PMC405_config:  unconfig
1480         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1481
1482 PMC405DE_config:        unconfig
1483         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1484
1485 PMC440_config:  unconfig
1486         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1487
1488 PPChameleonEVB_config           \
1489 PPChameleonEVB_BA_25_config     \
1490 PPChameleonEVB_ME_25_config     \
1491 PPChameleonEVB_HI_25_config     \
1492 PPChameleonEVB_BA_33_config     \
1493 PPChameleonEVB_ME_33_config     \
1494 PPChameleonEVB_HI_33_config:    unconfig
1495         @mkdir -p $(obj)include
1496         @[ -z "$(findstring EVB_BA,$@)" ] || \
1497                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1498                   $(XECHO) "... BASIC model" ; \
1499                 }
1500         @[ -z "$(findstring EVB_ME,$@)" ] || \
1501                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1502                   $(XECHO) "... MEDIUM model" ; \
1503                 }
1504         @[ -z "$(findstring EVB_HI,$@)" ] || \
1505                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1506                   $(XECHO) "... HIGH-END model" ; \
1507                 }
1508         @[ -z "$(findstring _25,$@)" ] || \
1509                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1510                   $(XECHO) "SysClk = 25MHz" ; \
1511                 }
1512         @[ -z "$(findstring _33,$@)" ] || \
1513                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1514                   $(XECHO) "SysClk = 33MHz" ; \
1515                 }
1516         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1517
1518 quad100hd_config:       unconfig
1519         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1520
1521 redwood_config: unconfig
1522         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1523
1524 sbc405_config:  unconfig
1525         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1526
1527 sc3_config:unconfig
1528         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1529
1530 sequoia_config \
1531 rainier_config: unconfig
1532         @mkdir -p $(obj)include
1533         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1534                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1535         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1536
1537 sequoia_nand_config \
1538 rainier_nand_config: unconfig
1539         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1540         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1541         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1542         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1543                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1544         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1545         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1546         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1547
1548 sequoia_ramboot_config \
1549 rainier_ramboot_config: unconfig
1550         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1551         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1552         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1553                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1554         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1555         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1556         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1557                 $(obj)board/amcc/sequoia/config.tmp
1558
1559 taihu_config:   unconfig
1560         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1561
1562 taishan_config: unconfig
1563         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1564
1565 v5fx30teval_config: unconfig
1566         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1567         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1568         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1569                 > $(obj)board/avnet/v5fx30teval/config.tmp
1570         @echo "TEXT_BASE := 0x03000000" \
1571                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1572         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1573
1574 v5fx30teval_flash_config: unconfig
1575         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1576         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1577         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1578                 > $(obj)board/avnet/v5fx30teval/config.tmp
1579         @echo "TEXT_BASE := 0xFF1C0000" \
1580                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1581         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1582
1583 VOH405_config:  unconfig
1584         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1585
1586 VOM405_config:  unconfig
1587         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1588
1589 W7OLMC_config   \
1590 W7OLMG_config: unconfig
1591         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1592
1593 # Walnut & Sycamore images are identical (recognized via PVR)
1594 walnut_config \
1595 sycamore_config: unconfig
1596         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1597
1598 WUH405_config:  unconfig
1599         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1600
1601 xilinx-ppc405-generic_flash_config: unconfig
1602         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1603         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1604                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1605         @echo "TEXT_BASE := 0xFE360000" \
1606                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1607         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1608
1609 xilinx-ppc405-generic_config: unconfig
1610         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1611         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1612                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1613         @echo "TEXT_BASE := 0x04000000" \
1614                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1615         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1616
1617 xilinx-ppc440-generic_flash_config: unconfig
1618         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1619         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1620                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1621         @echo "TEXT_BASE := 0xFE360000" \
1622                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1623         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1624
1625 xilinx-ppc440-generic_config: unconfig
1626         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1627         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1628                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1629         @echo "TEXT_BASE := 0x04000000" \
1630                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1631         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1632
1633 XPEDITE1000_config:     unconfig
1634         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1635
1636 yosemite_config \
1637 yellowstone_config: unconfig
1638         @mkdir -p $(obj)include
1639         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1640                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1641         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1642
1643 yucca_config:   unconfig
1644         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1645
1646 zeus_config:    unconfig
1647         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1648
1649 #########################################################################
1650 ## MPC8220 Systems
1651 #########################################################################
1652
1653 Alaska8220_config       \
1654 Yukon8220_config:       unconfig
1655         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1656
1657 sorcery_config:         unconfig
1658         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1659
1660 #########################################################################
1661 ## MPC824x Systems
1662 #########################################################################
1663 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1664
1665 A3000_config: unconfig
1666         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1667
1668 barco_config: unconfig
1669         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1670
1671 BMW_config: unconfig
1672         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1673
1674 CPC45_config    \
1675 CPC45_ROMBOOT_config:   unconfig
1676         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1677         @cd $(obj)include ;                             \
1678         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1679                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1680                 $(XECHO) "... booting from 8-bit flash" ; \
1681         else \
1682                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1683                 $(XECHO) "... booting from 64-bit flash" ; \
1684         fi; \
1685         echo "export CONFIG_BOOT_ROM" >> config.mk;
1686
1687 CU824_config: unconfig
1688         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1689
1690 debris_config: unconfig
1691         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1692
1693 eXalion_config: unconfig
1694         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1695
1696 HIDDEN_DRAGON_config: unconfig
1697         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1698
1699 kvme080_config: unconfig
1700         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1701
1702 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1703 # time permits.
1704 #linkstation_HDLAN_config \
1705 # Remove this line when HDLAN is fixed
1706 linkstation_HGLAN_config: unconfig
1707         @mkdir -p $(obj)include
1708         @case $@ in \
1709                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1710                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1711         esac
1712         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1713
1714 MOUSSE_config: unconfig
1715         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1716
1717 MUSENKI_config: unconfig
1718         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1719
1720 MVBLUE_config:  unconfig
1721         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1722
1723 OXC_config: unconfig
1724         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1725
1726 PN62_config: unconfig
1727         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1728
1729 Sandpoint8240_config: unconfig
1730         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1731
1732 Sandpoint8245_config: unconfig
1733         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1734
1735 sbc8240_config: unconfig
1736         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1737
1738 SL8245_config: unconfig
1739         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1740
1741 utx8245_config: unconfig
1742         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1743
1744 #########################################################################
1745 ## MPC8260 Systems
1746 #########################################################################
1747
1748 atc_config:     unconfig
1749         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1750
1751 cogent_mpc8260_config:  unconfig
1752         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1753
1754 CPU86_config    \
1755 CPU86_ROMBOOT_config: unconfig
1756         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1757         @cd $(obj)include ;                             \
1758         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1759                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1760                 $(XECHO) "... booting from 8-bit flash" ; \
1761         else \
1762                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1763                 $(XECHO) "... booting from 64-bit flash" ; \
1764         fi; \
1765         echo "export CONFIG_BOOT_ROM" >> config.mk;
1766
1767 CPU87_config    \
1768 CPU87_ROMBOOT_config: unconfig
1769         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1770         @cd $(obj)include ;                             \
1771         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1772                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1773                 $(XECHO) "... booting from 8-bit flash" ; \
1774         else \
1775                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1776                 $(XECHO) "... booting from 64-bit flash" ; \
1777         fi; \
1778         echo "export CONFIG_BOOT_ROM" >> config.mk;
1779
1780 ep8248_config   \
1781 ep8248E_config  :       unconfig
1782         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1783
1784 ep8260_config:  unconfig
1785         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1786
1787 ep82xxm_config: unconfig
1788         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1789
1790 gw8260_config:  unconfig
1791         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1792
1793 hymod_config:   unconfig
1794         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1795
1796 IDS8247_config: unconfig
1797         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1798
1799 IPHASE4539_config:      unconfig
1800         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1801
1802 ISPAN_config            \
1803 ISPAN_REVB_config:      unconfig
1804         @mkdir -p $(obj)include
1805         @if [ "$(findstring _REVB_,$@)" ] ; then \
1806                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1807         fi
1808         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1809
1810 mgcoge_config   :       unconfig
1811         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1812
1813 MPC8260ADS_config       \
1814 MPC8260ADS_lowboot_config       \
1815 MPC8260ADS_33MHz_config \
1816 MPC8260ADS_33MHz_lowboot_config \
1817 MPC8260ADS_40MHz_config \
1818 MPC8260ADS_40MHz_lowboot_config \
1819 MPC8272ADS_config       \
1820 MPC8272ADS_lowboot_config       \
1821 PQ2FADS_config          \
1822 PQ2FADS_lowboot_config          \
1823 PQ2FADS-VR_config       \
1824 PQ2FADS-VR_lowboot_config       \
1825 PQ2FADS-ZU_config       \
1826 PQ2FADS-ZU_lowboot_config       \
1827 PQ2FADS-ZU_66MHz_config \
1828 PQ2FADS-ZU_66MHz_lowboot_config \
1829         :               unconfig
1830         @mkdir -p $(obj)include
1831         @mkdir -p $(obj)board/freescale/mpc8260ads
1832         $(if $(findstring PQ2FADS,$@), \
1833         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1834         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1835         $(if $(findstring MHz,$@), \
1836         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1837         $(if $(findstring VR,$@), \
1838         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1839         @[ -z "$(findstring lowboot_,$@)" ] || \
1840                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1841                   $(XECHO) "... with lowboot configuration" ; \
1842                 }
1843         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1844
1845 MPC8266ADS_config:      unconfig
1846         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1847
1848 muas3001_dev_config \
1849 muas3001_config :       unconfig
1850         @mkdir -p $(obj)include
1851         @mkdir -p $(obj)board/muas3001
1852         @if [ "$(findstring dev,$@)" ] ; then \
1853                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1854         fi
1855         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1856
1857 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1858 PM825_config    \
1859 PM825_ROMBOOT_config    \
1860 PM825_BIGFLASH_config   \
1861 PM825_ROMBOOT_BIGFLASH_config   \
1862 PM826_config    \
1863 PM826_ROMBOOT_config    \
1864 PM826_BIGFLASH_config   \
1865 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1866         @mkdir -p $(obj)include
1867         @mkdir -p $(obj)board/pm826
1868         @if [ "$(findstring PM825_,$@)" ] ; then \
1869                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1870         else \
1871                 >$(obj)include/config.h ; \
1872         fi
1873         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1874                 $(XECHO) "... booting from 8-bit flash" ; \
1875                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1876                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1877                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1878                         $(XECHO) "... with 32 MB Flash" ; \
1879                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1880                 fi; \
1881         else \
1882                 $(XECHO) "... booting from 64-bit flash" ; \
1883                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1884                         $(XECHO) "... with 32 MB Flash" ; \
1885                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1886                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1887                 else \
1888                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1889                 fi; \
1890         fi
1891         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1892
1893 PM828_config    \
1894 PM828_PCI_config        \
1895 PM828_ROMBOOT_config    \
1896 PM828_ROMBOOT_PCI_config:       unconfig
1897         @mkdir -p $(obj)include
1898         @mkdir -p $(obj)board/pm826
1899         @if [ "$(findstring _PCI_,$@)" ] ; then \
1900                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1901                 $(XECHO) "... with PCI enabled" ; \
1902         fi
1903         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1904                 $(XECHO) "... booting from 8-bit flash" ; \
1905                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1906                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1907         fi
1908         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1909
1910 ppmc8260_config:        unconfig
1911         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1912
1913 Rattler8248_config      \
1914 Rattler_config:         unconfig
1915         @mkdir -p $(obj)include
1916         $(if $(findstring 8248,$@), \
1917         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1918         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1919
1920 RPXsuper_config:        unconfig
1921         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1922
1923 rsdproto_config:        unconfig
1924         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1925
1926 sacsng_config:  unconfig
1927         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1928
1929 sbc8260_config: unconfig
1930         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1931
1932 SCM_config:             unconfig
1933         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1934
1935 TQM8255_AA_config \
1936 TQM8260_AA_config \
1937 TQM8260_AB_config \
1938 TQM8260_AC_config \
1939 TQM8260_AD_config \
1940 TQM8260_AE_config \
1941 TQM8260_AF_config \
1942 TQM8260_AG_config \
1943 TQM8260_AH_config \
1944 TQM8260_AI_config \
1945 TQM8265_AA_config:  unconfig
1946         @mkdir -p $(obj)include
1947         @case "$@" in \
1948         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1949         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1950         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1951         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1952         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1953         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1954         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1955         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1956         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1957         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1958         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1959         esac; \
1960         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1961                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1962         fi; \
1963         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1964         echo "... with $${CFREQ}MHz system clock" ; \
1965         if [ "$${CACHE}" = "yes" ] ; then \
1966                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1967                 $(XECHO) "... with L2 Cache support" ; \
1968         else \
1969                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1970                 $(XECHO) "... without L2 Cache support" ; \
1971         fi; \
1972         if [ "$${BMODE}" = "60x" ] ; then \
1973                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1974                 $(XECHO) "... with 60x Bus Mode" ; \
1975         else \
1976                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
1977                 $(XECHO) "... without 60x Bus Mode" ; \
1978         fi
1979         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
1980
1981 TQM8272_config: unconfig
1982         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
1983
1984 VoVPN-GW_66MHz_config   \
1985 VoVPN-GW_100MHz_config:         unconfig
1986         @mkdir -p $(obj)include
1987         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
1988         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
1989
1990 ZPC1900_config: unconfig
1991         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
1992
1993 #########################################################################
1994 ## Coldfire
1995 #########################################################################
1996
1997 M5208EVBE_config :              unconfig
1998         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
1999
2000 M52277EVB_config \
2001 M52277EVB_spansion_config \
2002 M52277EVB_stmicro_config :      unconfig
2003         @case "$@" in \
2004         M52277EVB_config)               FLASH=SPANSION;; \
2005         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2006         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2007         esac; \
2008         if [ "$${FLASH}" = "SPANSION" ] ; then \
2009                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2010                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2011                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2012                 $(XECHO) "... with SPANSION boot..." ; \
2013         fi; \
2014         if [ "$${FLASH}" = "STMICRO" ] ; then \
2015                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2016                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2017                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2018                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2019                 $(XECHO) "... with ST Micro boot..." ; \
2020         fi
2021         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2022
2023 M5235EVB_config \
2024 M5235EVB_Flash16_config \
2025 M5235EVB_Flash32_config:        unconfig
2026         @case "$@" in \
2027         M5235EVB_config)                FLASH=16;; \
2028         M5235EVB_Flash16_config)        FLASH=16;; \
2029         M5235EVB_Flash32_config)        FLASH=32;; \
2030         esac; \
2031         if [ "$${FLASH}" != "16" ] ; then \
2032                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2033                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2034                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2035         else \
2036                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2037                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2038         fi
2039         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2040
2041 M5249EVB_config :               unconfig
2042         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2043
2044 M5253DEMO_config :              unconfig
2045         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2046
2047 M5253EVBE_config :              unconfig
2048         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2049
2050 cobra5272_config :              unconfig
2051         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2052
2053 EB+MCF-EV123_config :           unconfig
2054         @mkdir -p $(obj)include
2055         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2056         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2057         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2058
2059 EB+MCF-EV123_internal_config :  unconfig
2060         @mkdir -p $(obj)include
2061         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2062         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2063         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2064
2065 idmr_config :                   unconfig
2066         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2067
2068 M5271EVB_config :               unconfig
2069         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2070
2071 M5272C3_config :                unconfig
2072         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2073
2074 M5275EVB_config :               unconfig
2075         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2076
2077 M5282EVB_config :               unconfig
2078         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2079
2080 M53017EVB_config :              unconfig
2081         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2082
2083 M5329AFEE_config \
2084 M5329BFEE_config :      unconfig
2085         @case "$@" in \
2086         M5329AFEE_config)       NAND=0;; \
2087         M5329BFEE_config)       NAND=16;; \
2088         esac; \
2089         if [ "$${NAND}" != "0" ] ; then \
2090                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2091         fi
2092         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2093
2094 M5373EVB_config :       unconfig
2095         @case "$@" in \
2096         M5373EVB_config)        NAND=16;; \
2097         esac; \
2098         if [ "$${NAND}" != "0" ] ; then \
2099                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2100         fi
2101         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2102
2103 M54451EVB_config \
2104 M54451EVB_stmicro_config :      unconfig
2105         @case "$@" in \
2106         M54451EVB_config)               FLASH=NOR;; \
2107         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2108         esac; \
2109         if [ "$${FLASH}" = "NOR" ] ; then \
2110                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2111                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2112                 $(XECHO) "... with NOR boot..." ; \
2113         fi; \
2114         if [ "$${FLASH}" = "STMICRO" ] ; then \
2115                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2116                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2117                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2118                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2119                 $(XECHO) "... with ST Micro boot..." ; \
2120         fi; \
2121         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2122         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2123
2124 M54455EVB_config \
2125 M54455EVB_atmel_config \
2126 M54455EVB_intel_config \
2127 M54455EVB_a33_config \
2128 M54455EVB_a66_config \
2129 M54455EVB_i33_config \
2130 M54455EVB_i66_config \
2131 M54455EVB_stm33_config :        unconfig
2132         @case "$@" in \
2133         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2134         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2135         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2136         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2137         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2138         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2139         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2140         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2141         esac; \
2142         if [ "$${FLASH}" = "INTEL" ] ; then \
2143                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2144                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2145                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2146                 $(XECHO) "... with INTEL boot..." ; \
2147         fi; \
2148         if [ "$${FLASH}" = "ATMEL" ] ; then \
2149                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2150                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2151                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2152                 $(XECHO) "... with ATMEL boot..." ; \
2153         fi; \
2154         if [ "$${FLASH}" = "STMICRO" ] ; then \
2155                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2156                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2157                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2158                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2159                 $(XECHO) "... with ST Micro boot..." ; \
2160         fi; \
2161         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2162         $(XECHO) "... with $${FREQ}Hz input clock"
2163         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2164
2165 M5475AFE_config \
2166 M5475BFE_config \
2167 M5475CFE_config \
2168 M5475DFE_config \
2169 M5475EFE_config \
2170 M5475FFE_config \
2171 M5475GFE_config :       unconfig
2172         @case "$@" in \
2173         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2174         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2175         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2176         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2177         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2178         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2179         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2180         esac; \
2181         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2182         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2183         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2184         if [ "$${RAM1}" != "0" ] ; then \
2185                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2186         fi; \
2187         if [ "$${CODE}" != "0" ] ; then \
2188                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2189         fi; \
2190         if [ "$${VID}" == "1" ] ; then \
2191                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2192         fi; \
2193         if [ "$${USB}" == "1" ] ; then \
2194                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2195         fi
2196         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2197
2198 M5485AFE_config \
2199 M5485BFE_config \
2200 M5485CFE_config \
2201 M5485DFE_config \
2202 M5485EFE_config \
2203 M5485FFE_config \
2204 M5485GFE_config \
2205 M5485HFE_config :       unconfig
2206         @case "$@" in \
2207         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2208         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2209         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2210         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2211         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2212         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2213         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2214         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2215         esac; \
2216         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2217         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2218         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2219         if [ "$${RAM1}" != "0" ] ; then \
2220                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2221         fi; \
2222         if [ "$${CODE}" != "0" ] ; then \
2223                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2224         fi; \
2225         if [ "$${VID}" == "1" ] ; then \
2226                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2227         fi; \
2228         if [ "$${USB}" == "1" ] ; then \
2229                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2230         fi
2231         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2232
2233 TASREG_config :         unconfig
2234         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2235
2236 #########################################################################
2237 ## MPC83xx Systems
2238 #########################################################################
2239
2240 kmeter1_config: unconfig
2241         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2242
2243 MPC8313ERDB_33_config \
2244 MPC8313ERDB_66_config \
2245 MPC8313ERDB_NAND_33_config \
2246 MPC8313ERDB_NAND_66_config: unconfig
2247         @mkdir -p $(obj)include
2248         @mkdir -p $(obj)board/freescale/mpc8313erdb
2249         @if [ "$(findstring _33_,$@)" ] ; then \
2250                 $(XECHO) -n "...33M ..." ; \
2251                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2252         fi ; \
2253         if [ "$(findstring _66_,$@)" ] ; then \
2254                 $(XECHO) -n "...66M..." ; \
2255                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2256         fi ; \
2257         if [ "$(findstring _NAND_,$@)" ] ; then \
2258                 $(XECHO) -n "...NAND..." ; \
2259                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2260                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2261         fi ;
2262         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2263         @if [ "$(findstring _NAND_,$@)" ] ; then \
2264                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2265         fi ;
2266
2267 MPC8315ERDB_NAND_config \
2268 MPC8315ERDB_config: unconfig
2269         @if [ "$(findstring _NAND_,$@)" ] ; then \
2270                 ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
2271         fi ;
2272         @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2273
2274 MPC8323ERDB_config:     unconfig
2275         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2276
2277 MPC832XEMDS_config \
2278 MPC832XEMDS_HOST_33_config \
2279 MPC832XEMDS_HOST_66_config \
2280 MPC832XEMDS_SLAVE_config \
2281 MPC832XEMDS_ATM_config: unconfig
2282         @mkdir -p $(obj)include
2283         @if [ "$(findstring _HOST_,$@)" ] ; then \
2284                 $(XECHO) -n "... PCI HOST " ; \
2285                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2286         fi ; \
2287         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2288                 $(XECHO) "...PCI SLAVE 66M"  ; \
2289                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2290                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2291         fi ; \
2292         if [ "$(findstring _33_,$@)" ] ; then \
2293                 $(XECHO) -n "...33M ..." ; \
2294                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2295                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2296         fi ; \
2297         if [ "$(findstring _66_,$@)" ] ; then \
2298                 $(XECHO) -n "...66M..." ; \
2299                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2300                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2301         fi ; \
2302         if [ "$(findstring _ATM_,$@)" ] ; then \
2303                 $(XECHO) -n "...ATM..." ; \
2304                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2305                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2306         fi ;
2307         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2308
2309 MPC8349EMDS_config:     unconfig
2310         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2311
2312 MPC8349ITX_config \
2313 MPC8349ITX_LOWBOOT_config \
2314 MPC8349ITXGP_config:    unconfig
2315         @mkdir -p $(obj)include
2316         @mkdir -p $(obj)board/freescale/mpc8349itx
2317         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2318         @if [ "$(findstring GP,$@)" ] ; then \
2319                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2320         fi
2321         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2322                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2323         fi
2324         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2325
2326 MPC8360EMDS_config \
2327 MPC8360EMDS_HOST_33_config \
2328 MPC8360EMDS_HOST_66_config \
2329 MPC8360EMDS_SLAVE_config \
2330 MPC8360EMDS_ATM_config: unconfig
2331         @mkdir -p $(obj)include
2332         @if [ "$(findstring _HOST_,$@)" ] ; then \
2333                 $(XECHO) -n "... PCI HOST " ; \
2334                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2335         fi ; \
2336         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2337                 $(XECHO) "...PCI SLAVE 66M"  ; \
2338                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2339                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2340         fi ; \
2341         if [ "$(findstring _33_,$@)" ] ; then \
2342                 $(XECHO) -n "...33M ..." ; \
2343                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2344                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2345         fi ; \
2346         if [ "$(findstring _66_,$@)" ] ; then \
2347                 $(XECHO) -n "...66M..." ; \
2348                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2349                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2350         fi ; \
2351         if [ "$(findstring _ATM_,$@)" ] ; then \
2352                 $(XECHO) -n "...ATM..." ; \
2353                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2354                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2355         fi ;
2356         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2357
2358 MPC8360ERDK_33_config \
2359 MPC8360ERDK_66_config \
2360 MPC8360ERDK_config:     unconfig
2361         @mkdir -p $(obj)include
2362         @if [ "$(findstring _33_,$@)" ] ; then \
2363                 $(XECHO) -n "... CLKIN 33MHz " ; \
2364                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2365         fi ;
2366         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2367
2368 MPC837XEMDS_config \
2369 MPC837XEMDS_HOST_config:        unconfig
2370         @mkdir -p $(obj)include
2371         @if [ "$(findstring _HOST_,$@)" ] ; then \
2372                 $(XECHO) -n "... PCI HOST " ; \
2373                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2374         fi ;
2375         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2376
2377 MPC837XERDB_config:     unconfig
2378         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2379
2380 MVBLM7_config: unconfig
2381         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2382
2383 sbc8349_config \
2384 sbc8349_PCI_33_config \
2385 sbc8349_PCI_66_config: unconfig
2386         @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
2387
2388 SIMPC8313_LP_config \
2389 SIMPC8313_SP_config: unconfig
2390         @mkdir -p $(obj)include
2391         @mkdir -p $(obj)board/sheldon/simpc8313
2392         @if [ "$(findstring _LP_,$@)" ] ; then \
2393                 $(XECHO) -n "...Large Page NAND..." ; \
2394                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2395         fi ; \
2396         if [ "$(findstring _SP_,$@)" ] ; then \
2397                 $(XECHO) -n "...Small Page NAND..." ; \
2398                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2399         fi ;
2400         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2401         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2402
2403 TQM834x_config: unconfig
2404         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2405
2406 caddy2_config \
2407 vme8349_config:         unconfig
2408         @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
2409
2410 #########################################################################
2411 ## MPC85xx Systems
2412 #########################################################################
2413
2414 ATUM8548_config:        unconfig
2415         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2416
2417 MPC8536DS_NAND_config \
2418 MPC8536DS_SDCARD_config \
2419 MPC8536DS_SPIFLASH_config \
2420 MPC8536DS_36BIT_config \
2421 MPC8536DS_config:       unconfig
2422         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2423
2424 MPC8540ADS_config:      unconfig
2425         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2426
2427 MPC8540EVAL_config \
2428 MPC8540EVAL_33_config \
2429 MPC8540EVAL_66_config \
2430 MPC8540EVAL_33_slave_config \
2431 MPC8540EVAL_66_slave_config:      unconfig
2432         @mkdir -p $(obj)include
2433         @if [ "$(findstring _33_,$@)" ] ; then \
2434                 $(XECHO) "... 33 MHz PCI" ; \
2435         else \
2436                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2437                 $(XECHO) "... 66 MHz PCI" ; \
2438         fi ; \
2439         if [ "$(findstring _slave_,$@)" ] ; then \
2440                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2441                 $(XECHO) " slave" ; \
2442         else \
2443                 $(XECHO) " host" ; \
2444         fi
2445         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2446
2447 MPC8560ADS_config:      unconfig
2448         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2449
2450 MPC8541CDS_legacy_config \
2451 MPC8541CDS_config:      unconfig
2452         @mkdir -p $(obj)include
2453         @if [ "$(findstring _legacy_,$@)" ] ; then \
2454                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2455                 $(XECHO) "... legacy" ; \
2456         fi
2457         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2458
2459 MPC8544DS_config:       unconfig
2460         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2461
2462 MPC8548CDS_legacy_config \
2463 MPC8548CDS_config:      unconfig
2464         @mkdir -p $(obj)include
2465         @if [ "$(findstring _legacy_,$@)" ] ; then \
2466                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2467                 $(XECHO) "... legacy" ; \
2468         fi
2469         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2470
2471 MPC8555CDS_legacy_config \
2472 MPC8555CDS_config:      unconfig
2473         @mkdir -p $(obj)include
2474         @if [ "$(findstring _legacy_,$@)" ] ; then \
2475                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2476                 $(XECHO) "... legacy" ; \
2477         fi
2478         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2479
2480 MPC8568MDS_config:      unconfig
2481         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2482
2483 MPC8569MDS_config:      unconfig
2484         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2485
2486 MPC8572DS_36BIT_config \
2487 MPC8572DS_config:       unconfig
2488         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2489
2490 P2020DS_36BIT_config \
2491 P2020DS_config:         unconfig
2492         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2493
2494 P1011RDB_config \
2495 P1011RDB_NAND_config \
2496 P1011RDB_SDCARD_config \
2497 P1011RDB_SPIFLASH_config \
2498 P1020RDB_config \
2499 P1020RDB_NAND_config \
2500 P1020RDB_SDCARD_config \
2501 P1020RDB_SPIFLASH_config \
2502 P2010RDB_config \
2503 P2010RDB_NAND_config \
2504 P2010RDB_SDCARD_config \
2505 P2010RDB_SPIFLASH_config \
2506 P2020RDB_config \
2507 P2020RDB_NAND_config \
2508 P2020RDB_SDCARD_config \
2509 P2020RDB_SPIFLASH_config:       unconfig
2510         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2511
2512 PM854_config:   unconfig
2513         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2514
2515 PM856_config:   unconfig
2516         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2517
2518 sbc8540_config \
2519 sbc8540_33_config \
2520 sbc8540_66_config:      unconfig
2521         @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
2522
2523 sbc8548_config \
2524 sbc8548_PCI_33_config \
2525 sbc8548_PCI_66_config \
2526 sbc8548_PCI_33_PCIE_config \
2527 sbc8548_PCI_66_PCIE_config: unconfig
2528         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2529
2530 sbc8560_config \
2531 sbc8560_33_config \
2532 sbc8560_66_config:      unconfig
2533         @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
2534
2535 socrates_config:        unconfig
2536         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2537
2538 stxgp3_config:          unconfig
2539         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2540
2541 stxssa_config           \
2542 stxssa_4M_config:       unconfig
2543         @mkdir -p $(obj)include
2544         @if [ "$(findstring _4M_,$@)" ] ; then \
2545                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2546                 $(XECHO) "... with 4 MiB flash memory" ; \
2547         fi
2548         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2549
2550 TQM8540_config          \
2551 TQM8541_config          \
2552 TQM8548_config          \
2553 TQM8548_AG_config       \
2554 TQM8548_BE_config       \
2555 TQM8555_config          \
2556 TQM8560_config:         unconfig
2557         @mkdir -p $(obj)include
2558         @BTYPE=$(@:_config=); \
2559         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2560         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2561         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2562         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2563         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2564         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2565         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2566         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2567
2568 XPEDITE5200_config:     unconfig
2569         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2570
2571 XPEDITE5370_config:     unconfig
2572         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2573
2574 #########################################################################
2575 ## MPC86xx Systems
2576 #########################################################################
2577
2578 MPC8610HPCD_config:     unconfig
2579         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2580
2581 MPC8641HPCN_36BIT_config \
2582 MPC8641HPCN_config:    unconfig
2583         @mkdir -p $(obj)include
2584         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2585                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2586                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2587         fi
2588         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2589
2590 sbc8641d_config:        unconfig
2591         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2592
2593 XPEDITE5170_config:     unconfig
2594         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2595
2596 #########################################################################
2597 ## 74xx/7xx Systems
2598 #########################################################################
2599
2600 AmigaOneG3SE_config:    unconfig
2601         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2602
2603 BAB7xx_config: unconfig
2604         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2605
2606 CPCI750_config: unconfig
2607         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2608
2609 DB64360_config: unconfig
2610         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2611
2612 DB64460_config: unconfig
2613         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2614
2615 ELPPC_config: unconfig
2616         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2617
2618 EVB64260_config \
2619 EVB64260_750CX_config:  unconfig
2620         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2621
2622 mpc7448hpc2_config:  unconfig
2623         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2624
2625 P3G4_config: unconfig
2626         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2627
2628 p3m750_config   \
2629 p3m7448_config:         unconfig
2630         @mkdir -p $(obj)include
2631         @if [ "$(findstring 750_,$@)" ] ; then \
2632                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2633         else \
2634                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2635         fi
2636         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2637
2638 PCIPPC2_config \
2639 PCIPPC6_config: unconfig
2640         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2641
2642 ppmc7xx_config: unconfig
2643         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2644
2645 ZUMA_config:    unconfig
2646         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2647
2648 #========================================================================
2649 # ARM
2650 #========================================================================
2651 #########################################################################
2652 ## StrongARM Systems
2653 #########################################################################
2654
2655 assabet_config  :       unconfig
2656         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2657
2658 dnp1110_config  :       unconfig
2659         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2660
2661 gcplus_config   :       unconfig
2662         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2663
2664 lart_config     :       unconfig
2665         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2666
2667 shannon_config  :       unconfig
2668         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2669
2670 #########################################################################
2671 ## ARM92xT Systems
2672 #########################################################################
2673
2674 a320evb_config  :       unconfig
2675         @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
2676
2677 #########################################################################
2678 ## Atmel AT91RM9200 Systems
2679 #########################################################################
2680
2681 at91rm9200dk_config     :       unconfig
2682         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2683
2684 at91rm9200ek_config     :       unconfig
2685         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2686
2687 cmc_pu2_config  :       unconfig
2688         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2689
2690 CPUAT91_RAM_config \
2691 CPUAT91_config  :       unconfig
2692         @mkdir -p $(obj)include
2693         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2694         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2695
2696 csb637_config   :       unconfig
2697         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2698
2699 kb9202_config   :       unconfig
2700         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2701
2702 m501sk_config   :       unconfig
2703         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2704
2705 mp2usb_config   :       unconfig
2706         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2707
2708 #########################################################################
2709 ## Atmel ARM926EJ-S Systems
2710 #########################################################################
2711
2712 afeb9260_config:        unconfig
2713         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2714
2715 at91cap9adk_config      :       unconfig
2716         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2717
2718 at91sam9260ek_nandflash_config \
2719 at91sam9260ek_dataflash_cs0_config \
2720 at91sam9260ek_dataflash_cs1_config \
2721 at91sam9260ek_config \
2722 at91sam9g20ek_nandflash_config \
2723 at91sam9g20ek_dataflash_cs0_config \
2724 at91sam9g20ek_dataflash_cs1_config \
2725 at91sam9g20ek_config    :       unconfig
2726         @mkdir -p $(obj)include
2727         @if [ "$(findstring 9g20,$@)" ] ; then \
2728                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2729                 $(XECHO) "... 9G20 Variant" ; \
2730         else \
2731                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2732         fi;
2733         @if [ "$(findstring _nandflash,$@)" ] ; then \
2734                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2735                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2736         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2737                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2738                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2739         else \
2740                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2741                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2742         fi;
2743         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2744
2745 at91sam9xeek_nandflash_config \
2746 at91sam9xeek_dataflash_cs0_config \
2747 at91sam9xeek_dataflash_cs1_config \
2748 at91sam9xeek_config     :       unconfig
2749         @mkdir -p $(obj)include
2750         @if [ "$(findstring _nandflash,$@)" ] ; then \
2751                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2752                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2753         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2754                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2755                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2756         else \
2757                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2758                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2759         fi;
2760         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2761
2762 at91sam9261ek_nandflash_config \
2763 at91sam9261ek_dataflash_cs0_config \
2764 at91sam9261ek_dataflash_cs3_config \
2765 at91sam9261ek_config \
2766 at91sam9g10ek_nandflash_config \
2767 at91sam9g10ek_dataflash_cs0_config \
2768 at91sam9g10ek_dataflash_cs3_config \
2769 at91sam9g10ek_config    :       unconfig
2770         @mkdir -p $(obj)include
2771         @if [ "$(findstring 9g10,$@)" ] ; then \
2772                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2773                 $(XECHO) "... 9G10 Variant" ; \
2774         else \
2775                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2776         fi;
2777         @if [ "$(findstring _nandflash,$@)" ] ; then \
2778                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2779                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2780         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2781                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2782                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2783         else \
2784                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2785                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2786         fi;
2787         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2788
2789 at91sam9263ek_norflash_config \
2790 at91sam9263ek_norflash_boot_config \
2791 at91sam9263ek_nandflash_config \
2792 at91sam9263ek_dataflash_config \
2793 at91sam9263ek_dataflash_cs0_config \
2794 at91sam9263ek_config    :       unconfig
2795         @mkdir -p $(obj)include
2796         @if [ "$(findstring _nandflash,$@)" ] ; then \
2797                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2798                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2799         elif [ "$(findstring norflash,$@)" ] ; then \
2800                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2801                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2802         else \
2803                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2804                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2805         fi;
2806         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2807                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2808                 $(XECHO) "... and boot from NOR FLASH" ; \
2809         fi;
2810         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2811
2812 at91sam9rlek_nandflash_config \
2813 at91sam9rlek_dataflash_config \
2814 at91sam9rlek_dataflash_cs0_config \
2815 at91sam9rlek_config     :       unconfig
2816         @mkdir -p $(obj)include
2817         @if [ "$(findstring _nandflash,$@)" ] ; then \
2818                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2819                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2820         else \
2821                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2822                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2823         fi;
2824         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2825
2826 CPU9G20_128M_config \
2827 CPU9G20_config \
2828 CPU9260_128M_config \
2829 CPU9260_config  :       unconfig
2830         @mkdir -p $(obj)include
2831         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2832         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2833
2834 meesc_config    :       unconfig
2835         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2836
2837 pm9261_config   :       unconfig
2838         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2839
2840 at91sam9m10g45ek_nandflash_config \
2841 at91sam9m10g45ek_dataflash_config \
2842 at91sam9m10g45ek_dataflash_cs0_config \
2843 at91sam9m10g45ek_config \
2844 at91sam9g45ekes_nandflash_config \
2845 at91sam9g45ekes_dataflash_config \
2846 at91sam9g45ekes_dataflash_cs0_config \
2847 at91sam9g45ekes_config  :       unconfig
2848         @mkdir -p $(obj)include
2849                 @if [ "$(findstring 9m10,$@)" ] ; then \
2850                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2851                 $(XECHO) "... 9M10G45 Variant" ; \
2852         else \
2853                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2854         fi;
2855
2856         @if [ "$(findstring _nandflash,$@)" ] ; then \
2857                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2858                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2859         else \
2860                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2861                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2862         fi;
2863         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2864
2865 pm9263_config   :       unconfig
2866         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2867
2868 SBC35_A9G20_NANDFLASH_config \
2869 SBC35_A9G20_EEPROM_config \
2870 SBC35_A9G20_config      :       unconfig
2871         @mkdir -p $(obj)include
2872         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2873         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2874
2875 TNY_A9G20_NANDFLASH_config \
2876 TNY_A9G20_EEPROM_config \
2877 TNY_A9G20_config \
2878 TNY_A9260_NANDFLASH_config \
2879 TNY_A9260_EEPROM_config \
2880 TNY_A9260_config        :       unconfig
2881         @mkdir -p $(obj)include
2882         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2883         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2884
2885 ########################################################################
2886 ## ARM Integrator boards - see doc/README-integrator for more info.
2887 integratorap_config     \
2888 ap_config               \
2889 ap966_config            \
2890 ap922_config            \
2891 ap922_XA10_config       \
2892 ap7_config              \
2893 ap720t_config           \
2894 ap920t_config           \
2895 ap926ejs_config         \
2896 ap946es_config: unconfig
2897         @board/armltd/integrator/split_by_variant.sh ap $@
2898
2899 integratorcp_config     \
2900 cp_config               \
2901 cp920t_config           \
2902 cp926ejs_config         \
2903 cp946es_config          \
2904 cp1136_config           \
2905 cp966_config            \
2906 cp922_config            \
2907 cp922_XA10_config       \
2908 cp1026_config: unconfig
2909         @board/armltd/integrator/split_by_variant.sh cp $@
2910
2911 da830evm_config:        unconfig
2912         @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
2913
2914 davinci_dvevm_config :  unconfig
2915         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2916
2917 davinci_schmoogie_config :      unconfig
2918         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2919
2920 davinci_sffsdr_config : unconfig
2921         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2922
2923 davinci_sonata_config : unconfig
2924         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2925
2926 davinci_dm355evm_config :       unconfig
2927         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2928
2929 davinci_dm355leopard_config :   unconfig
2930         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2931
2932 davinci_dm365evm_config :       unconfig
2933         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2934
2935 davinci_dm6467evm_config :      unconfig
2936         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2937
2938 imx27lite_config:       unconfig
2939         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2940
2941 lpd7a400_config \
2942 lpd7a404_config:        unconfig
2943         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2944
2945 mv88f6281gtw_ge_config: unconfig
2946         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2947
2948 mx1ads_config   :       unconfig
2949         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2950
2951 mx1fs2_config   :       unconfig
2952         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2953
2954 netstar_config:         unconfig
2955         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2956
2957 nhk8815_config \
2958 nhk8815_onenand_config: unconfig
2959         @mkdir -p $(obj)include
2960         @ > $(obj)include/config.h
2961         @if [ "$(findstring _onenand, $@)" ] ; then \
2962                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2963                 $(XECHO) "... configured to boot from OneNand Flash"; \
2964         else \
2965                 $(XECHO) "... configured to boot from Nand Flash"; \
2966         fi
2967         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2968
2969 omap1510inn_config :    unconfig
2970         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2971
2972 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2973
2974 omap1610inn_config \
2975 omap1610inn_cs0boot_config \
2976 omap1610inn_cs3boot_config \
2977 omap1610inn_cs_autoboot_config \
2978 omap1610h2_config \
2979 omap1610h2_cs0boot_config \
2980 omap1610h2_cs3boot_config \
2981 omap1610h2_cs_autoboot_config:  unconfig
2982         @mkdir -p $(obj)include
2983         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
2984                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
2985                 $(XECHO) "... configured for CS0 boot"; \
2986         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
2987                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
2988                 $(XECHO) "... configured for CS_AUTO boot"; \
2989         else \
2990                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
2991                 $(XECHO) "... configured for CS3 boot"; \
2992         fi;
2993         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
2994
2995 omap5912osk_config :    unconfig
2996         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
2997
2998 openrd_base_config: unconfig
2999         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3000
3001 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3002
3003 omap730p2_config \
3004 omap730p2_cs0boot_config \
3005 omap730p2_cs3boot_config :      unconfig
3006         @mkdir -p $(obj)include
3007         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3008                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3009                 $(XECHO) "... configured for CS0 boot"; \
3010         else \
3011                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3012                 $(XECHO) "... configured for CS3 boot"; \
3013         fi;
3014         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3015
3016 rd6281a_config: unconfig
3017         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3018
3019 sbc2410x_config: unconfig
3020         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3021
3022 scb9328_config  :       unconfig
3023         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3024
3025 sheevaplug_config: unconfig
3026         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3027
3028 smdk2400_config :       unconfig
3029         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3030
3031 smdk2410_config :       unconfig
3032         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3033
3034 SX1_stdout_serial_config \
3035 SX1_config:             unconfig
3036         @mkdir -p $(obj)include
3037         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3038                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3039                 $(XECHO) "... configured for stdout serial"; \
3040         else \
3041                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3042                 $(XECHO) "... configured for stdout usbtty"; \
3043         fi;
3044         @$(MKCONFIG) SX1 arm arm925t sx1
3045
3046 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3047 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3048
3049 trab_config \
3050 trab_bigram_config \
3051 trab_bigflash_config \
3052 trab_old_config:        unconfig
3053         @mkdir -p $(obj)include
3054         @mkdir -p $(obj)board/trab
3055         @[ -z "$(findstring _bigram,$@)" ] || \
3056                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3057                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3058                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3059                 }
3060         @[ -z "$(findstring _bigflash,$@)" ] || \
3061                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3062                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3063                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3064                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3065                 }
3066         @[ -z "$(findstring _old,$@)" ] || \
3067                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3068                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3069                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3070                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3071                 }
3072         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3073
3074 VCMA9_config    :       unconfig
3075         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3076
3077 #########################################################################
3078 # ARM supplied Versatile development boards
3079 #########################################################################
3080
3081 cm4008_config   :       unconfig
3082         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3083
3084 cm41xx_config   :       unconfig
3085         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3086
3087 versatile_config        \
3088 versatileab_config      \
3089 versatilepb_config :    unconfig
3090         @board/armltd/versatile/split_by_variant.sh $@
3091
3092 voiceblue_config:       unconfig
3093         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3094
3095 #########################################################################
3096 ## S3C44B0 Systems
3097 #########################################################################
3098
3099 B2_config       :       unconfig
3100         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3101
3102 #########################################################################
3103 ## ARM720T Systems
3104 #########################################################################
3105
3106 armadillo_config:       unconfig
3107         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3108
3109 ep7312_config   :       unconfig
3110         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3111
3112 impa7_config    :       unconfig
3113         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3114
3115 modnet50_config :       unconfig
3116         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3117
3118 evb4510_config :        unconfig
3119         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3120
3121 lpc2292sodimm_config:   unconfig
3122         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3123
3124 SMN42_config    :       unconfig
3125         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3126
3127 #########################################################################
3128 ## ARM CORTEX Systems
3129 #########################################################################
3130
3131 devkit8000_config :     unconfig
3132         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3133
3134 omap3_beagle_config :   unconfig
3135         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3136
3137 omap3_overo_config :    unconfig
3138         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3139
3140 omap3_evm_config :      unconfig
3141         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3142
3143 omap3_pandora_config :  unconfig
3144         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3145
3146 omap3_sdp3430_config :  unconfig
3147         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3148
3149 omap3_zoom1_config :    unconfig
3150         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3151
3152 omap3_zoom2_config :    unconfig
3153         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3154
3155 smdkc100_config:        unconfig
3156         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3157
3158 #########################################################################
3159 ## XScale Systems
3160 #########################################################################
3161
3162 actux1_config   :       unconfig
3163         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3164
3165 actux2_config   :       unconfig
3166         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3167
3168 actux3_config   :       unconfig
3169         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3170
3171 actux4_config   :       unconfig
3172         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3173
3174 cerf250_config :        unconfig
3175         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3176
3177 cradle_config   :       unconfig
3178         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3179
3180 csb226_config   :       unconfig
3181         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3182
3183 delta_config :  unconfig
3184         @$(MKCONFIG) $(@:_config=) arm pxa delta
3185
3186 innokom_config  :       unconfig
3187         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3188
3189 ixdp425_config  :       unconfig
3190         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3191
3192 ixdpg425_config :       unconfig
3193         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3194
3195 lubbock_config  :       unconfig
3196         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3197
3198 pleb2_config    :       unconfig
3199         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3200
3201 logodl_config   :       unconfig
3202         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3203
3204 pdnb3_config \
3205 scpu_config:    unconfig
3206         @mkdir -p $(obj)include
3207         @if [ "$(findstring scpu_,$@)" ] ; then \
3208                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3209                 $(XECHO) "... on SCPU board variant" ; \
3210         fi
3211         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3212
3213 pxa255_idp_config:      unconfig
3214         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3215
3216 polaris_config \
3217 trizepsiv_config        :       unconfig
3218         @mkdir -p $(obj)include
3219         @if [ "$(findstring polaris,$@)" ] ; then \
3220                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3221         fi;
3222         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3223
3224 wepep250_config :       unconfig
3225         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3226
3227 xaeniax_config  :       unconfig
3228         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3229
3230 xm250_config    :       unconfig
3231         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3232
3233 xsengine_config :       unconfig
3234         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3235
3236 zylonite_config :
3237         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3238
3239 #########################################################################
3240 ## ARM1136 Systems
3241 #########################################################################
3242
3243 apollon_config          : unconfig
3244         @mkdir -p $(obj)include
3245         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3246         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3247         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3248
3249 imx31_litekit_config    : unconfig
3250         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3251
3252 imx31_phycore_eet_config \
3253 imx31_phycore_config    : unconfig
3254         @mkdir -p $(obj)include
3255         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3256                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3257         fi
3258         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3259
3260 mx31ads_config          : unconfig
3261         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3262
3263 mx31pdk_config \
3264 mx31pdk_nand_config     : unconfig
3265         @mkdir -p $(obj)include
3266         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3267                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3268         else                                                                            \
3269                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3270                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3271         fi
3272         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3273
3274 omap2420h4_config       : unconfig
3275         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3276
3277 qong_config             : unconfig
3278         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3279
3280 #########################################################################
3281 ## ARM1176 Systems
3282 #########################################################################
3283 smdk6400_noUSB_config   \
3284 smdk6400_config :       unconfig
3285         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3286         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3287         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3288         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3289                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3290                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3291         else                                                                            \
3292                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3293                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3294         fi
3295         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3296
3297 #========================================================================
3298 # i386
3299 #========================================================================
3300 #########################################################################
3301 ## AMD SC520 CDP
3302 #########################################################################
3303 eNET_config     :       unconfig
3304         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3305
3306 sc520_cdp_config        :       unconfig
3307         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3308
3309 sc520_spunk_config      :       unconfig
3310         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3311
3312 sc520_spunk_rel_config  :       unconfig
3313         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3314
3315 #========================================================================
3316 # MIPS
3317 #========================================================================
3318 #########################################################################
3319 ## MIPS32 4Kc
3320 #########################################################################
3321
3322 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3323
3324 incaip_100MHz_config    \
3325 incaip_133MHz_config    \
3326 incaip_150MHz_config    \
3327 incaip_config: unconfig
3328         @mkdir -p $(obj)include
3329         @[ -z "$(findstring _100MHz,$@)" ] || \
3330                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3331                   $(XECHO) "... with 100MHz system clock" ; \
3332                 }
3333         @[ -z "$(findstring _133MHz,$@)" ] || \
3334                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3335                   $(XECHO) "... with 133MHz system clock" ; \
3336                 }
3337         @[ -z "$(findstring _150MHz,$@)" ] || \
3338                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3339                   $(XECHO) "... with 150MHz system clock" ; \
3340                 }
3341         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3342
3343 tb0229_config: unconfig
3344         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3345
3346 vct_premium_config              \
3347 vct_premium_small_config        \
3348 vct_premium_onenand_config      \
3349 vct_premium_onenand_small_config \
3350 vct_platinum_config             \
3351 vct_platinum_small_config       \
3352 vct_platinum_onenand_config     \
3353 vct_platinum_onenand_small_config \
3354 vct_platinumavc_config          \
3355 vct_platinumavc_small_config    \
3356 vct_platinumavc_onenand_config  \
3357 vct_platinumavc_onenand_small_config: unconfig
3358         @mkdir -p $(obj)include
3359         @if [ "$(findstring _premium,$@)" ] ; then \
3360                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3361                 $(XECHO) "... on Premium board variant" ; \
3362         fi
3363         @if [ "$(findstring _platinum_,$@)" ] ; then \
3364                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3365                 $(XECHO) "... on Platinum board variant" ; \
3366         fi
3367         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3368                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3369                 $(XECHO) "... on PlatinumAVC board variant" ; \
3370         fi
3371         @if [ "$(findstring _onenand,$@)" ] ; then \
3372                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3373                 $(XECHO) "... on OneNAND board variant" ; \
3374         fi
3375         @if [ "$(findstring _small,$@)" ] ; then \
3376                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3377                 $(XECHO) "... stripped down image variant" ; \
3378         fi
3379         @$(MKCONFIG) -a vct mips mips vct micronas
3380
3381 #########################################################################
3382 ## MIPS32 AU1X00
3383 #########################################################################
3384
3385 dbau1000_config         :       unconfig
3386         @mkdir -p $(obj)include
3387         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3388         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3389
3390 dbau1100_config         :       unconfig
3391         @mkdir -p $(obj)include
3392         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3393         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3394
3395 dbau1500_config         :       unconfig
3396         @mkdir -p $(obj)include
3397         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3398         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3399
3400 dbau1550_config         :       unconfig
3401         @mkdir -p $(obj)include
3402         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3403         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3404
3405 dbau1550_el_config      :       unconfig
3406         @mkdir -p $(obj)include
3407         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3408         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3409
3410 gth2_config             :       unconfig
3411         @mkdir -p $(obj)include
3412         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3413         @$(MKCONFIG) -a gth2 mips mips gth2
3414
3415 pb1000_config           :       unconfig
3416         @mkdir -p $(obj)include
3417         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3418         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3419
3420 qemu_mips_config        : unconfig
3421         @mkdir -p $(obj)include
3422         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3423         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3424
3425 #########################################################################
3426 ## MIPS64 5Kc
3427 #########################################################################
3428
3429 purple_config :         unconfig
3430         @$(MKCONFIG) $(@:_config=) mips mips purple
3431
3432 #========================================================================
3433 # Nios
3434 #========================================================================
3435 #########################################################################
3436 ## Nios32
3437 #########################################################################
3438
3439 ADNPESC1_DNPEVA2_base_32_config \
3440 ADNPESC1_base_32_config         \
3441 ADNPESC1_config: unconfig
3442         @mkdir -p $(obj)include
3443         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3444                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3445                   $(XECHO) "... DNP/EVA2 configuration" ; \
3446                 }
3447         @[ -z "$(findstring _base_32,$@)" ] || \
3448                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3449                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3450                 }
3451         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3452                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3453                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3454                 }
3455         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3456
3457 DK1C20_safe_32_config           \
3458 DK1C20_standard_32_config       \
3459 DK1C20_config:  unconfig
3460         @mkdir -p $(obj)include
3461         @[ -z "$(findstring _safe_32,$@)" ] || \
3462                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3463                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3464                 }
3465         @[ -z "$(findstring _standard_32,$@)" ] || \
3466                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3467                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3468                 }
3469         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3470                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3471                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3472                 }
3473         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3474
3475 DK1S10_safe_32_config           \
3476 DK1S10_standard_32_config       \
3477 DK1S10_mtx_ldk_20_config        \
3478 DK1S10_config:  unconfig
3479         @mkdir -p $(obj)include
3480         @[ -z "$(findstring _safe_32,$@)" ] || \
3481                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3482                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3483                 }
3484         @[ -z "$(findstring _standard_32,$@)" ] || \
3485                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3486                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3487                 }
3488         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3489                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3490                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3491                 }
3492         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3493                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3494                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3495                 }
3496         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3497
3498 #########################################################################
3499 ## Nios-II
3500 #########################################################################
3501
3502 EP1C20_config : unconfig
3503         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3504
3505 EP1S10_config : unconfig
3506         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3507
3508 EP1S40_config : unconfig
3509         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3510
3511 PK1C20_config : unconfig
3512         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3513
3514 PCI5441_config : unconfig
3515         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3516
3517 #========================================================================
3518 ## Microblaze
3519 #========================================================================
3520
3521 microblaze-generic_config:      unconfig
3522         @mkdir -p $(obj)include
3523         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3524
3525 #========================================================================
3526 # Blackfin
3527 #========================================================================
3528
3529 # Analog Devices boards
3530 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3531         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3532
3533 # Bluetechnix tinyboards
3534 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \
3535         tcm-bf518 tcm-bf537
3536
3537 # Misc third party boards
3538 BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp
3539
3540 # I-SYST Micromodule
3541 BFIN_BOARDS += ibf-dsp561
3542
3543 $(BFIN_BOARDS:%=%_config)       : unconfig
3544         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3545
3546 bf527-ezkit-v2_config   : unconfig
3547         @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
3548                 bf527-ezkit blackfin blackfin bf527-ezkit
3549
3550 #========================================================================
3551 # AVR32
3552 #========================================================================
3553
3554 atngw100_config :       unconfig
3555         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3556
3557 atstk1002_config        :       unconfig
3558         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3559
3560 atstk1003_config        :       unconfig
3561         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3562
3563 atstk1004_config        :       unconfig
3564         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3565
3566 atstk1006_config        :       unconfig
3567         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3568
3569 favr-32-ezkit_config    :       unconfig
3570         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3571
3572 hammerhead_config       :       unconfig
3573         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3574
3575 mimc200_config          :       unconfig
3576         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3577
3578 #========================================================================
3579 # SH3 (SuperH)
3580 #========================================================================
3581
3582 #########################################################################
3583 ## sh2 (Renesas SuperH)
3584 #########################################################################
3585 rsk7203_config: unconfig
3586         @mkdir -p $(obj)include
3587         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3588         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3589
3590 #########################################################################
3591 ## sh3 (Renesas SuperH)
3592 #########################################################################
3593
3594 mpr2_config: unconfig
3595         @mkdir -p $(obj)include
3596         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3597         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3598
3599 ms7720se_config: unconfig
3600         @mkdir -p $(obj)include
3601         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3602         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3603
3604 #########################################################################
3605 ## sh4 (Renesas SuperH)
3606 #########################################################################
3607
3608 MigoR_config :       unconfig
3609         @mkdir -p $(obj)include
3610         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3611         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3612
3613 ms7750se_config: unconfig
3614         @mkdir -p $(obj)include
3615         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3616         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3617
3618 ms7722se_config :       unconfig
3619         @mkdir -p $(obj)include
3620         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3621         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3622
3623 r2dplus_config  :   unconfig
3624         @mkdir -p $(obj)include
3625         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3626         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3627
3628 r7780mp_config: unconfig
3629         @mkdir -p $(obj)include
3630         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3631         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3632
3633 sh7763rdp_config  :   unconfig
3634         @mkdir -p $(obj)include
3635         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3636         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3637
3638 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3639 sh7785lcr_32bit_config \
3640 sh7785lcr_config  :   unconfig
3641         @mkdir -p $(obj)include
3642         @mkdir -p $(obj)board/renesas/sh7785lcr
3643         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3644         @if [ "$(findstring 32bit, $@)" ] ; then \
3645                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3646                 echo "TEXT_BASE = 0x8ff80000" > \
3647                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3648                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3649         fi
3650         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3651
3652 ap325rxa_config  :   unconfig
3653         @mkdir -p $(obj)include
3654         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3655         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3656
3657 espt_config  :   unconfig
3658         @mkdir -p $(obj)include
3659         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3660         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3661
3662 #========================================================================
3663 # SPARC
3664 #========================================================================
3665
3666 #########################################################################
3667 ## LEON3
3668 #########################################################################
3669
3670 # Gaisler GR-XC3S-1500 board
3671 gr_xc3s_1500_config : unconfig
3672         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3673
3674 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3675 gr_cpci_ax2000_config : unconfig
3676         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3677
3678 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3679 # Development board Stratix II edition, FPGA Device EP2S60.
3680 gr_ep2s60_config: unconfig
3681         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3682
3683 # Gaisler LEON3 GRSIM simulator
3684 grsim_config : unconfig
3685         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3686
3687 #########################################################################
3688 ## LEON2
3689 #########################################################################
3690
3691 # Gaisler LEON2 GRSIM simulator
3692 grsim_leon2_config : unconfig
3693         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3694
3695 #########################################################################
3696 #########################################################################
3697 #########################################################################
3698
3699 clean:
3700         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3701                $(obj)examples/standalone/atmel_df_pow2                    \
3702                $(obj)examples/standalone/eepro100_eeprom                  \
3703                $(obj)examples/standalone/hello_world                      \
3704                $(obj)examples/standalone/interrupt                        \
3705                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3706                $(obj)examples/standalone/sched                            \
3707                $(obj)examples/standalone/smc91111_eeprom                  \
3708                $(obj)examples/standalone/test_burst                       \
3709                $(obj)examples/standalone/timer
3710         @rm -f $(obj)examples/api/demo{,.bin}
3711         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3712                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3713                $(obj)tools/envcrc                                         \
3714                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3715                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3716                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3717                $(obj)tools/ncb             $(obj)tools/ubsha1
3718         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3719                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3720                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3721                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3722                $(obj)lib_blackfin/u-boot.lds                              \
3723                $(obj)u-boot.lds                                           \
3724                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3725         @rm -f $(obj)include/bmp_logo.h
3726         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3727         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3728         @rm -f $(ONENAND_BIN)
3729         @rm -f $(obj)onenand_ipl/u-boot.lds
3730         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3731         @find $(OBJTREE) -type f \
3732                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3733                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3734                 | xargs rm -f
3735
3736 clobber:        clean
3737         @find $(OBJTREE) -type f \( -name .depend \
3738                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3739                 -print0 \
3740                 | xargs -0 rm -f
3741         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3742                 $(obj)cscope.* $(obj)*.*~
3743         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3744         @rm -f $(obj)u-boot.kwb
3745         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3746         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3747         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3748         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3749         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3750
3751 ifeq ($(OBJTREE),$(SRCTREE))
3752 mrproper \
3753 distclean:      clobber unconfig
3754 else
3755 mrproper \
3756 distclean:      clobber unconfig
3757         rm -rf $(obj)*
3758 endif
3759
3760 backup:
3761         F=`basename $(TOPDIR)` ; cd .. ; \
3762         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3763
3764 #########################################################################