Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 11
  26 SUBLEVEL =
  27 EXTRAVERSION =
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 endif
 234 ifeq ($(CPU),mpc86xx)
 235 LIBS += cpu/mpc8xxx/ddr/libddr.a
 236 LIBS += cpu/mpc8xxx/lib8xxx.a
 237 endif
 238 LIBS += drivers/rtc/librtc.a
 239 LIBS += drivers/serial/libserial.a
 240 LIBS += drivers/twserial/libtws.a
 241 LIBS += drivers/usb/gadget/libusb_gadget.a
 242 LIBS += drivers/usb/host/libusb_host.a
 243 LIBS += drivers/usb/musb/libusb_musb.a
 244 LIBS += drivers/usb/phy/libusb_phy.a
 245 LIBS += drivers/video/libvideo.a
 246 LIBS += drivers/watchdog/libwatchdog.a
 247 LIBS += common/libcommon.a
 248 LIBS += libfdt/libfdt.a
 249 LIBS += api/libapi.a
 250 LIBS += post/libpost.a
 251
 252 LIBS := $(addprefix $(obj),$(LIBS))
 253 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 254
 255 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 256 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 257
 258 # Add GCC lib
 259 ifdef USE_PRIVATE_LIBGCC
 260 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 261 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 262 else
 263 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 264 endif
 265 else
 266 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 267 endif
 268 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 269 export PLATFORM_LIBS
 270
 271 # Special flags for CPP when processing the linker script.
 272 # Pass the version down so we can handle backwards compatibility
 273 # on the fly.
 274 LDPPFLAGS += \
 275         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 276         $(shell $(LD) --version | \
 277           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 278
 279 ifeq ($(CONFIG_NAND_U_BOOT),y)
 280 NAND_SPL = nand_spl
 281 U_BOOT_NAND = $(obj)u-boot-nand.bin
 282 endif
 283
 284 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 285 ONENAND_IPL = onenand_ipl
 286 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 287 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 288 endif
 289
 290 __OBJS := $(subst $(obj),,$(OBJS))
 291 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 292
 293 #########################################################################
 294 #########################################################################
 295
 296 # Always append ALL so that arch config.mk's can add custom ones
 297 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 298
 299 all:            $(ALL)
 300
 301 $(obj)u-boot.hex:       $(obj)u-boot
 302                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 303
 304 $(obj)u-boot.srec:      $(obj)u-boot
 305                 $(OBJCOPY) -O srec $< $@
 306
 307 $(obj)u-boot.bin:       $(obj)u-boot
 308                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 309
 310 $(obj)u-boot.ldr:       $(obj)u-boot
 311                 $(CREATE_LDR_ENV)
 312                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 313
 314 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 315                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 316
 317 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 318                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 319
 320 $(obj)u-boot.img:       $(obj)u-boot.bin
 321                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 322                 -a $(TEXT_BASE) -e 0 \
 323                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 324                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 325                 -d $< $@
 326
 327 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 328                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 329                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 330
 331 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 332                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 333
 334 $(obj)u-boot.dis:       $(obj)u-boot
 335                 $(OBJDUMP) -d $< > $@
 336
 337 GEN_UBOOT = \
 338                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 339                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 340                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 341                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 342                         -Map u-boot.map -o u-boot
 343 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 344                 $(GEN_UBOOT)
 345 ifeq ($(CONFIG_KALLSYMS),y)
 346                 smap=`$(call SYSTEM_MAP,u-boot) | \
 347                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 348                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 349                         -c common/system_map.c -o $(obj)common/system_map.o
 350                 $(GEN_UBOOT) $(obj)common/system_map.o
 351 endif
 352
 353 $(OBJS):        depend
 354                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 355
 356 $(LIBS):        depend $(SUBDIRS)
 357                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 358
 359 $(LIBBOARD):    depend $(LIBS)
 360                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 361
 362 $(SUBDIRS):     depend
 363                 $(MAKE) -C $@ all
 364
 365 $(LDSCRIPT):    depend
 366                 $(MAKE) -C $(dir $@) $(notdir $@)
 367
 368 $(obj)u-boot.lds: $(LDSCRIPT)
 369                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 370
 371 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 372                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 373
 374 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 375                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 376
 377 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 378                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 379
 380 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 381                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 382
 383 $(VERSION_FILE):
 384                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 385                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 386                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 387
 388 $(TIMESTAMP_FILE):
 389                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 390                 @date +'#define U_BOOT_TIME "%T"' >> $@
 391
 392 gdbtools:
 393                 $(MAKE) -C tools/gdb all || exit 1
 394
 395 updater:
 396                 $(MAKE) -C tools/updater all || exit 1
 397
 398 env:
 399                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 400
 401 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 402                 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 403
 404 TAG_SUBDIRS = $(SUBDIRS)
 405 TAG_SUBDIRS += $(dir $(__LIBS))
 406 TAG_SUBDIRS += include
 407
 408 tags ctags:
 409                 ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
 410                                                 -name '*.[chS]' -print`
 411
 412 etags:
 413                 etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
 414                                                 -name '*.[chS]' -print`
 415 cscope:
 416                 find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
 417                 cscope -b -q -k
 418
 419 SYSTEM_MAP = \
 420                 $(NM) $1 | \
 421                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 422                 LC_ALL=C sort
 423 $(obj)System.map:       $(obj)u-boot
 424                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 425
 426 #
 427 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 428 #
 429 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 430 # the dep file is only include in this top level makefile to determine when
 431 # to regenerate the autoconf.mk file.
 432 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 433         @$(XECHO) Generating $@ ; \
 434         set -e ; \
 435         : Generate the dependancies ; \
 436         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 437                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 438
 439 $(obj)include/autoconf.mk: $(obj)include/config.h
 440         @$(XECHO) Generating $@ ; \
 441         set -e ; \
 442         : Extract the config macros ; \
 443         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 444                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 445         mv $@.tmp $@
 446
 447 #########################################################################
 448 else    # !config.mk
 449 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 450 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 451 $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 452 dep tags ctags etags cscope $(obj)System.map:
 453         @echo "System not configured - see README" >&2
 454         @ exit 1
 455 endif   # config.mk
 456
 457 .PHONY : CHANGELOG
 458 CHANGELOG:
 459         git log --no-merges U-Boot-1_1_5.. | \
 460         unexpand -a | sed -e 's/\s\s*$$//' > $@
 461
 462 include/license.h: tools/bin2header COPYING
 463          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 464 #########################################################################
 465
 466 unconfig:
 467         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 468                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 469                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 470
 471 %: %_config
 472         $(MAKE)
 473
 474 #========================================================================
 475 # PowerPC
 476 #========================================================================
 477
 478 #########################################################################
 479 ## MPC5xx Systems
 480 #########################################################################
 481
 482 canmb_config:   unconfig
 483         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 484
 485 cmi_mpc5xx_config:      unconfig
 486         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 487
 488 PATI_config:            unconfig
 489         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 490
 491 #########################################################################
 492 ## MPC5xxx Systems
 493 #########################################################################
 494
 495 aev_config: unconfig
 496         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 497
 498 BC3450_config:  unconfig
 499         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 500
 501 cm5200_config:  unconfig
 502         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 503
 504 cpci5200_config:  unconfig
 505         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 506
 507 digsy_mtc_config \
 508 digsy_mtc_LOWBOOT_config        \
 509 digsy_mtc_RAMBOOT_config:       unconfig
 510         @mkdir -p $(obj)include
 511         @mkdir -p $(obj)board/digsy_mtc
 512         @ >$(obj)include/config.h
 513         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 514                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 515                   echo "... with LOWBOOT configuration" ; \
 516                 }
 517         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 518                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 519                   echo "... with RAMBOOT configuration" ; \
 520                 }
 521         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 522
 523 galaxy5200_LOWBOOT_config \
 524 galaxy5200_config:      unconfig
 525         @mkdir -p $(obj)include
 526         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 527         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 528
 529 hmi1001_config: unconfig
 530         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 531
 532 Lite5200_config                         \
 533 Lite5200_LOWBOOT_config                 \
 534 Lite5200_LOWBOOT08_config               \
 535 icecube_5200_config                     \
 536 icecube_5200_LOWBOOT_config             \
 537 icecube_5200_LOWBOOT08_config           \
 538 icecube_5200_DDR_config                 \
 539 icecube_5200_DDR_LOWBOOT_config         \
 540 icecube_5200_DDR_LOWBOOT08_config       \
 541 icecube_5100_config:                    unconfig
 542         @mkdir -p $(obj)include
 543         @mkdir -p $(obj)board/icecube
 544         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 545                 { if [ "$(findstring DDR,$@)" ] ; \
 546                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 547                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 548                   fi ; \
 549                   $(XECHO) "... with LOWBOOT configuration" ; \
 550                 }
 551         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 552                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 553                   echo "... with 8 MB flash only" ; \
 554                   $(XECHO) "... with LOWBOOT configuration" ; \
 555                 }
 556         @[ -z "$(findstring DDR,$@)" ] || \
 557                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 558                   $(XECHO) "... DDR memory revision" ; \
 559                 }
 560         @[ -z "$(findstring 5200,$@)" ] || \
 561                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 562                   $(XECHO) "... with MPC5200 processor" ; \
 563                 }
 564         @[ -z "$(findstring 5100,$@)" ] || \
 565                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 566                   $(XECHO) "... with MGT5100 processor" ; \
 567                 }
 568         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 569
 570 jupiter_config: unconfig
 571         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 572
 573 inka4x0_config: unconfig
 574         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 575
 576 ipek01_config: unconfig
 577         @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
 578
 579 lite5200b_config        \
 580 lite5200b_PM_config     \
 581 lite5200b_LOWBOOT_config:       unconfig
 582         @mkdir -p $(obj)include
 583         @mkdir -p $(obj)board/icecube
 584         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 585         @ $(XECHO) "... DDR memory revision"
 586         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 587         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 588         @[ -z "$(findstring _PM_,$@)" ] || \
 589                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 590                   $(XECHO) "... with power management (low-power mode) support" ; \
 591                 }
 592         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 593                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 594                   $(XECHO) "... with LOWBOOT configuration" ; \
 595                 }
 596         @ $(XECHO) "... with MPC5200B processor"
 597         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 598
 599 mcc200_config   \
 600 mcc200_SDRAM_config     \
 601 mcc200_highboot_config  \
 602 mcc200_COM12_config     \
 603 mcc200_COM12_SDRAM_config       \
 604 mcc200_COM12_highboot_config    \
 605 mcc200_COM12_highboot_SDRAM_config      \
 606 mcc200_highboot_SDRAM_config    \
 607 prs200_config   \
 608 prs200_DDR_config       \
 609 prs200_highboot_config  \
 610 prs200_highboot_DDR_config:     unconfig
 611         @mkdir -p $(obj)include
 612         @mkdir -p $(obj)board/mcc200
 613         @[ -n "$(findstring highboot,$@)" ] || \
 614                 { $(XECHO) "... with lowboot configuration" ; \
 615                 }
 616         @[ -z "$(findstring highboot,$@)" ] || \
 617                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 618                   $(XECHO) "... with highboot configuration" ; \
 619                 }
 620         @[ -n "$(findstring _SDRAM,$@)" ] || \
 621                 { if [ -n "$(findstring mcc200,$@)" ]; \
 622                   then \
 623                         $(XECHO) "... with DDR" ; \
 624                   else \
 625                         if [ -n "$(findstring _DDR,$@)" ];\
 626                         then \
 627                                 $(XECHO) "... with DDR" ; \
 628                         else \
 629                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 630                                 $(XECHO) "... with SDRAM" ; \
 631                         fi; \
 632                   fi; \
 633                 }
 634         @[ -z "$(findstring _SDRAM,$@)" ] || \
 635                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 636                   $(XECHO) "... with SDRAM" ; \
 637                 }
 638         @[ -z "$(findstring COM12,$@)" ] || \
 639                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 640                   $(XECHO) "... with console on COM12" ; \
 641                 }
 642         @[ -z "$(findstring prs200,$@)" ] || \
 643                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 644                 }
 645         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 646
 647 mecp5200_config:  unconfig
 648         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 649
 650 motionpro_config:       unconfig
 651         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 652
 653 mucmc52_config:         unconfig
 654         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 655
 656 munices_config: unconfig
 657         @$(MKCONFIG) munices ppc mpc5xxx munices
 658
 659 MVBC_P_config: unconfig
 660         @mkdir -p $(obj)include
 661         @mkdir -p $(obj)board/mvbc_p
 662         @ >$(obj)include/config.h
 663         @[ -z "$(findstring MVBC_P,$@)" ] || \
 664         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 665         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 666
 667 o2dnt_config:   unconfig
 668         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 669
 670 pcm030_config \
 671 pcm030_LOWBOOT_config:  unconfig
 672         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 673         @ >$(obj)include/config.h
 674         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 675                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 676                   echo "... with LOWBOOT configuration" ; \
 677                 }
 678         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 679
 680 pf5200_config:  unconfig
 681         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 682
 683 PM520_config \
 684 PM520_DDR_config \
 685 PM520_ROMBOOT_config \
 686 PM520_ROMBOOT_DDR_config:       unconfig
 687         @mkdir -p $(obj)include
 688         @[ -z "$(findstring DDR,$@)" ] || \
 689                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 690                   $(XECHO) "... DDR memory revision" ; \
 691                 }
 692         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 693                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 694                   $(XECHO) "... booting from 8-bit flash" ; \
 695                 }
 696         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 697
 698 smmaco4_config: unconfig
 699         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 700
 701 spieval_config: unconfig
 702         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 703
 704 TB5200_B_config \
 705 TB5200_config:  unconfig
 706         @mkdir -p $(obj)include
 707         @[ -z "$(findstring _B,$@)" ] || \
 708                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 709                   $(XECHO) "... with MPC5200B processor" ; \
 710                 }
 711         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 712
 713 MINI5200_config \
 714 EVAL5200_config \
 715 TOP5200_config: unconfig
 716         @mkdir -p $(obj)include
 717         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 718         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 719
 720 Total5100_config                \
 721 Total5200_config                \
 722 Total5200_lowboot_config        \
 723 Total5200_Rev2_config           \
 724 Total5200_Rev2_lowboot_config:  unconfig
 725         @mkdir -p $(obj)include
 726         @mkdir -p $(obj)board/total5200
 727         @[ -z "$(findstring 5100,$@)" ] || \
 728                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 729                   $(XECHO) "... with MGT5100 processor" ; \
 730                 }
 731         @[ -z "$(findstring 5200,$@)" ] || \
 732                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 733                   $(XECHO) "... with MPC5200 processor" ; \
 734                 }
 735         @[ -n "$(findstring Rev,$@)" ] || \
 736                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 737                   $(XECHO) "... revision 1 board" ; \
 738                 }
 739         @[ -z "$(findstring Rev2_,$@)" ] || \
 740                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 741                   $(XECHO) "... revision 2 board" ; \
 742                 }
 743         @[ -z "$(findstring lowboot_,$@)" ] || \
 744                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 745                   $(XECHO) "... with lowboot configuration" ; \
 746                 }
 747         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 748
 749 cam5200_config \
 750 cam5200_niosflash_config \
 751 fo300_config \
 752 MiniFAP_config \
 753 TQM5200S_config \
 754 TQM5200S_HIGHBOOT_config \
 755 TQM5200_B_config \
 756 TQM5200_B_HIGHBOOT_config \
 757 TQM5200_config  \
 758 TQM5200_STK100_config:  unconfig
 759         @mkdir -p $(obj)include
 760         @mkdir -p $(obj)board/tqc/tqm5200
 761         @[ -z "$(findstring cam5200,$@)" ] || \
 762                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 763                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 764                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 765                   $(XECHO) "... TQM5200S on Cam5200" ; \
 766                 }
 767         @[ -z "$(findstring niosflash,$@)" ] || \
 768                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 769                   $(XECHO) "... with NIOS flash driver" ; \
 770                 }
 771         @[ -z "$(findstring fo300,$@)" ] || \
 772                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 773                   $(XECHO) "... TQM5200 on FO300" ; \
 774                 }
 775         @[ -z "$(findstring MiniFAP,$@)" ] || \
 776                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 777                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 778                 }
 779         @[ -z "$(findstring STK100,$@)" ] || \
 780                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 781                   $(XECHO) "... on a STK52XX.100 base board" ; \
 782                 }
 783         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 784                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 785                 }
 786         @[ -z "$(findstring TQM5200S,$@)" ] || \
 787                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 788                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 789                 }
 790         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 791                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 792                 }
 793         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 794
 795 uc101_config:           unconfig
 796         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 797
 798 v38b_config: unconfig
 799         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 800
 801 #########################################################################
 802 ## MPC512x Systems
 803 #########################################################################
 804
 805 aria_config:    unconfig
 806         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 807
 808 mecp5123_config:        unconfig
 809         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 810
 811 mpc5121ads_config \
 812 mpc5121ads_rev2_config  \
 813         : unconfig
 814         @mkdir -p $(obj)include
 815         @if [ "$(findstring rev2,$@)" ] ; then \
 816                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 817         fi
 818         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 819
 820 #########################################################################
 821 ## MPC8xx Systems
 822 #########################################################################
 823
 824 Adder_config    \
 825 Adder87x_config \
 826 AdderII_config  \
 827         :               unconfig
 828         @mkdir -p $(obj)include
 829         $(if $(findstring AdderII,$@), \
 830         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 831         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 832
 833 AdderUSB_config:        unconfig
 834         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 835
 836 ADS860_config     \
 837 FADS823_config    \
 838 FADS850SAR_config \
 839 MPC86xADS_config  \
 840 MPC885ADS_config  \
 841 FADS860T_config:        unconfig
 842         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 843
 844 AMX860_config   :       unconfig
 845         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 846
 847 c2mon_config:           unconfig
 848         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 849
 850 CCM_config:             unconfig
 851         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 852
 853 cogent_mpc8xx_config:   unconfig
 854         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 855
 856 ELPT860_config:         unconfig
 857         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 858
 859 EP88x_config:           unconfig
 860         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 861
 862 ESTEEM192E_config:      unconfig
 863         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 864
 865 ETX094_config   :       unconfig
 866         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 867
 868 FLAGADM_config: unconfig
 869         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 870
 871 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 872
 873 GEN860T_SC_config       \
 874 GEN860T_config: unconfig
 875         @mkdir -p $(obj)include
 876         @[ -z "$(findstring _SC,$@)" ] || \
 877                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 878                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 879                 }
 880         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 881
 882 GENIETV_config: unconfig
 883         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 884
 885 GTH_config:     unconfig
 886         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 887
 888 hermes_config   :       unconfig
 889         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 890
 891 HMI10_config    :       unconfig
 892         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 893
 894 IAD210_config: unconfig
 895         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 896
 897 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 898
 899 ICU862_100MHz_config    \
 900 ICU862_config: unconfig
 901         @mkdir -p $(obj)include
 902         @[ -z "$(findstring _100MHz,$@)" ] || \
 903                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 904                   $(XECHO) "... with 100MHz system clock" ; \
 905                 }
 906         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 907
 908 IP860_config    :       unconfig
 909         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 910
 911 IVML24_256_config \
 912 IVML24_128_config \
 913 IVML24_config:  unconfig
 914         @mkdir -p $(obj)include
 915         @[ -z "$(findstring IVML24_config,$@)" ] || \
 916                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 917                  }
 918         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 919                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 920                  }
 921         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 922                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 923                  }
 924         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 925
 926 IVMS8_256_config \
 927 IVMS8_128_config \
 928 IVMS8_config:   unconfig
 929         @mkdir -p $(obj)include
 930         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 931                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 932                  }
 933         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 934                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 935                  }
 936         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 937                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 938                  }
 939         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 940
 941 kmsupx4_config:         unconfig
 942         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 943
 944 KUP4K_config    :       unconfig
 945         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 946
 947 KUP4X_config    :       unconfig
 948         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 949
 950 LANTEC_config   :       unconfig
 951         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 952
 953 lwmon_config:           unconfig
 954         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 955
 956 MBX_config      \
 957 MBX860T_config: unconfig
 958         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 959
 960 mgsuvd_config:          unconfig
 961         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 962
 963 MHPC_config:            unconfig
 964         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 965
 966 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 967
 968 NETVIA_V2_config \
 969 NETVIA_config:          unconfig
 970         @mkdir -p $(obj)include
 971         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 972                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
 973                   $(XECHO) "... Version 1" ; \
 974                  }
 975         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
 976                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
 977                   $(XECHO) "... Version 2" ; \
 978                  }
 979         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 980
 981 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
 982
 983 NETPHONE_V2_config \
 984 NETPHONE_config:        unconfig
 985         @mkdir -p $(obj)include
 986         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
 987                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
 988                  }
 989         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
 990                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
 991                  }
 992         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
 993
 994 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
 995
 996 NETTA_ISDN_6412_SWAPHOOK_config \
 997 NETTA_ISDN_SWAPHOOK_config \
 998 NETTA_6412_SWAPHOOK_config \
 999 NETTA_SWAPHOOK_config \
1000 NETTA_ISDN_6412_config \
1001 NETTA_ISDN_config \
1002 NETTA_6412_config \
1003 NETTA_config:           unconfig
1004         @mkdir -p $(obj)include
1005         @[ -z "$(findstring ISDN_,$@)" ] || \
1006                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1007                  }
1008         @[ -n "$(findstring ISDN_,$@)" ] || \
1009                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1010                  }
1011         @[ -z "$(findstring 6412_,$@)" ] || \
1012                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1013                  }
1014         @[ -n "$(findstring 6412_,$@)" ] || \
1015                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1016                  }
1017         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1018                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1019                  }
1020         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1021                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1022                  }
1023         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1024
1025 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1026
1027 NETTA2_V2_config \
1028 NETTA2_config:          unconfig
1029         @mkdir -p $(obj)include
1030         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1031                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1032                  }
1033         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1034                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1035                  }
1036         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1037
1038 NC650_Rev1_config \
1039 NC650_Rev2_config \
1040 CP850_config:   unconfig
1041         @mkdir -p $(obj)include
1042         @[ -z "$(findstring CP850,$@)" ] || \
1043                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1044                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1045                  }
1046         @[ -z "$(findstring Rev1,$@)" ] || \
1047                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1048                  }
1049         @[ -z "$(findstring Rev2,$@)" ] || \
1050                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1051                  }
1052         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1053
1054 NX823_config:           unconfig
1055         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1056
1057 pcu_e_config:           unconfig
1058         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1059
1060 QS850_config:   unconfig
1061         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1062
1063 QS823_config:   unconfig
1064         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1065
1066 QS860T_config:  unconfig
1067         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1068
1069 quantum_config: unconfig
1070         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1071
1072 R360MPI_config: unconfig
1073         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1074
1075 RBC823_config:  unconfig
1076         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1077
1078 RPXClassic_config:      unconfig
1079         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1080
1081 RPXlite_config:         unconfig
1082         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1083
1084 RPXlite_DW_64_config            \
1085 RPXlite_DW_LCD_config           \
1086 RPXlite_DW_64_LCD_config        \
1087 RPXlite_DW_NVRAM_config         \
1088 RPXlite_DW_NVRAM_64_config      \
1089 RPXlite_DW_NVRAM_LCD_config     \
1090 RPXlite_DW_NVRAM_64_LCD_config  \
1091 RPXlite_DW_config:      unconfig
1092         @mkdir -p $(obj)include
1093         @[ -z "$(findstring _64,$@)" ] || \
1094                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1095                   $(XECHO) "... with 64MHz system clock ..."; \
1096                 }
1097         @[ -z "$(findstring _LCD,$@)" ] || \
1098                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1099                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1100                   $(XECHO) "... with LCD display ..."; \
1101                 }
1102         @[ -z "$(findstring _NVRAM,$@)" ] || \
1103                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1104                   $(XECHO) "... with ENV in NVRAM ..."; \
1105                 }
1106         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1107
1108 rmu_config:     unconfig
1109         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1110
1111 RRvision_config:        unconfig
1112         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1113
1114 RRvision_LCD_config:    unconfig
1115         @mkdir -p $(obj)include
1116         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1117         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1118         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1119
1120 SM850_config    :       unconfig
1121         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1122
1123 spc1920_config:         unconfig
1124         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1125
1126 SPD823TS_config:        unconfig
1127         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1128
1129 stxxtc_config:  unconfig
1130         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1131
1132 svm_sc8xx_config:       unconfig
1133         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1134
1135 SXNI855T_config:        unconfig
1136         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1137
1138 # EMK MPC8xx based modules
1139 TOP860_config:          unconfig
1140         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1141
1142 # Play some tricks for configuration selection
1143 # Only 855 and 860 boards may come with FEC
1144 # and only 823 boards may have LCD support
1145 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1146
1147 FPS850L_config          \
1148 FPS860L_config          \
1149 NSCU_config             \
1150 TQM823L_config          \
1151 TQM823L_LCD_config      \
1152 TQM850L_config          \
1153 TQM855L_config          \
1154 TQM860L_config          \
1155 TQM862L_config          \
1156 TQM823M_config          \
1157 TQM850M_config          \
1158 TQM855M_config          \
1159 TQM860M_config          \
1160 TQM862M_config          \
1161 TQM866M_config          \
1162 TQM885D_config          \
1163 TK885D_config           \
1164 virtlab2_config:        unconfig
1165         @mkdir -p $(obj)include
1166         @[ -z "$(findstring _LCD,$@)" ] || \
1167                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1168                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1169                   $(XECHO) "... with LCD display" ; \
1170                 }
1171         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1172
1173 TTTech_config:  unconfig
1174         @mkdir -p $(obj)include
1175         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1176         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1177         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1178
1179 uc100_config    :       unconfig
1180         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1181
1182 v37_config:     unconfig
1183         @mkdir -p $(obj)include
1184         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1185         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1186         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1187
1188 wtk_config:     unconfig
1189         @mkdir -p $(obj)include
1190         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1191         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1192         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1193
1194 #########################################################################
1195 ## PPC4xx Systems
1196 #########################################################################
1197 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1198
1199 acadia_config:  unconfig
1200         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1201
1202 acadia_nand_config:     unconfig
1203         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1204         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1205         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1206         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1207         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1208         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1209
1210 ADCIOP_config:  unconfig
1211         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1212
1213 alpr_config:    unconfig
1214         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1215
1216 AP1000_config:unconfig
1217         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1218
1219 APC405_config:  unconfig
1220         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1221
1222 AR405_config:   unconfig
1223         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1224
1225 ASH405_config:  unconfig
1226         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1227
1228 bamboo_config:  unconfig
1229         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1230
1231 bamboo_nand_config:     unconfig
1232         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1233         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1234         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1235         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1236         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1237         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1238
1239 bubinga_config: unconfig
1240         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1241
1242 CANBT_config:   unconfig
1243         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1244
1245 # Arches, Canyonlands & Glacier use different U-Boot images
1246 arches_config \
1247 canyonlands_config \
1248 glacier_config: unconfig
1249         @mkdir -p $(obj)include
1250         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1251                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1252         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1253
1254 canyonlands_nand_config \
1255 glacier_nand_config:    unconfig
1256         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1257         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1258         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1259         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1260                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1261         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1262         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1263         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1264
1265 CATcenter_config        \
1266 CATcenter_25_config     \
1267 CATcenter_33_config:    unconfig
1268         @mkdir -p $(obj)include
1269         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1270         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1271         @[ -z "$(findstring _25,$@)" ] || \
1272                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1273                   $(XECHO) "SysClk = 25MHz" ; \
1274                 }
1275         @[ -z "$(findstring _33,$@)" ] || \
1276                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1277                   $(XECHO) "SysClk = 33MHz" ; \
1278                 }
1279         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1280
1281 CMS700_config:  unconfig
1282         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1283
1284 CPCI2DP_config: unconfig
1285         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1286
1287 CPCI405_config          \
1288 CPCI4052_config         \
1289 CPCI405DT_config        \
1290 CPCI405AB_config:       unconfig
1291         @mkdir -p $(obj)board/esd/cpci405
1292         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1293
1294 CPCIISER4_config:       unconfig
1295         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1296
1297 CRAYL1_config:  unconfig
1298         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1299
1300 csb272_config:  unconfig
1301         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1302
1303 csb472_config:  unconfig
1304         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1305
1306 DASA_SIM_config: unconfig
1307         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1308
1309 dlvision_config: unconfig
1310         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1311
1312 DP405_config:   unconfig
1313         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1314
1315 DU405_config:   unconfig
1316         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1317
1318 DU440_config:   unconfig
1319         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1320
1321 ebony_config:   unconfig
1322         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1323
1324 ERIC_config:    unconfig
1325         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1326
1327 EXBITGEN_config:        unconfig
1328         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1329
1330 fx12mm_flash_config: unconfig
1331         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1332         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1333         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1334                 > $(obj)board/avnet/fx12mm/config.tmp
1335         @echo "TEXT_BASE := 0xFFCB0000" \
1336                 >> $(obj)board/avnet/fx12mm/config.tmp
1337         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1338
1339 fx12mm_config: unconfig
1340         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1341         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1342         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1343                 > $(obj)board/avnet/fx12mm/config.tmp
1344         @echo "TEXT_BASE := 0x03000000" \
1345                 >> $(obj)board/avnet/fx12mm/config.tmp
1346         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1347
1348 G2000_config:   unconfig
1349         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1350
1351 gdppc440etx_config:     unconfig
1352         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1353
1354 hcu4_config:    unconfig
1355         @mkdir -p $(obj)board/netstal/common
1356         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1357
1358 hcu5_config:    unconfig
1359         @mkdir -p $(obj)board/netstal/common
1360         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1361
1362 HH405_config:   unconfig
1363         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1364
1365 HUB405_config:  unconfig
1366         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1367
1368 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1369 intip_config \
1370 devconcenter_config:    unconfig
1371         @mkdir -p $(obj)include
1372         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1373                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1374         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1375
1376 JSE_config:     unconfig
1377         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1378
1379 KAREF_config: unconfig
1380         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1381
1382 katmai_config:  unconfig
1383         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1384
1385 # Kilauea & Haleakala images are identical (recognized via PVR)
1386 kilauea_config \
1387 haleakala_config: unconfig
1388         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1389
1390 kilauea_nand_config \
1391 haleakala_nand_config: unconfig
1392         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1393         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1394         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1395         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1396         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1397         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1398
1399 korat_config:   unconfig
1400         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1401
1402 luan_config:    unconfig
1403         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1404
1405 lwmon5_config:  unconfig
1406         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1407
1408 makalu_config:  unconfig
1409         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1410
1411 mcu25_config:  unconfig
1412         @mkdir -p $(obj)board/netstal/common
1413         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1414
1415 METROBOX_config: unconfig
1416         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1417
1418 MIP405_config:  unconfig
1419         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1420
1421 MIP405T_config: unconfig
1422         @mkdir -p $(obj)include
1423         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1424         @$(XECHO) "Enable subset config for MIP405T"
1425         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1426
1427 ML2_config:     unconfig
1428         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1429
1430 ml300_config:   unconfig
1431         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1432
1433 ml507_flash_config: unconfig
1434         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1435         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1436         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1437                 > $(obj)board/xilinx/ml507/config.tmp
1438         @echo "TEXT_BASE := 0xFE360000" \
1439                 >> $(obj)board/xilinx/ml507/config.tmp
1440         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1441
1442 ml507_config: unconfig
1443         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1444         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1445         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1446                 > $(obj)board/xilinx/ml507/config.tmp
1447         @echo "TEXT_BASE := 0x04000000"  \
1448                 >> $(obj)board/xilinx/ml507/config.tmp
1449         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1450
1451 neo_config:     unconfig
1452         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1453
1454 ocotea_config:  unconfig
1455         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1456
1457 OCRTC_config            \
1458 ORSG_config:    unconfig
1459         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1460
1461 p3p440_config:  unconfig
1462         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1463
1464 PCI405_config:  unconfig
1465         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1466
1467 pcs440ep_config:        unconfig
1468         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1469
1470 PIP405_config:  unconfig
1471         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1472
1473 PLU405_config:  unconfig
1474         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1475
1476 PMC405_config:  unconfig
1477         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1478
1479 PMC405DE_config:        unconfig
1480         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1481
1482 PMC440_config:  unconfig
1483         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1484
1485 PPChameleonEVB_config           \
1486 PPChameleonEVB_BA_25_config     \
1487 PPChameleonEVB_ME_25_config     \
1488 PPChameleonEVB_HI_25_config     \
1489 PPChameleonEVB_BA_33_config     \
1490 PPChameleonEVB_ME_33_config     \
1491 PPChameleonEVB_HI_33_config:    unconfig
1492         @mkdir -p $(obj)include
1493         @[ -z "$(findstring EVB_BA,$@)" ] || \
1494                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1495                   $(XECHO) "... BASIC model" ; \
1496                 }
1497         @[ -z "$(findstring EVB_ME,$@)" ] || \
1498                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1499                   $(XECHO) "... MEDIUM model" ; \
1500                 }
1501         @[ -z "$(findstring EVB_HI,$@)" ] || \
1502                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1503                   $(XECHO) "... HIGH-END model" ; \
1504                 }
1505         @[ -z "$(findstring _25,$@)" ] || \
1506                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1507                   $(XECHO) "SysClk = 25MHz" ; \
1508                 }
1509         @[ -z "$(findstring _33,$@)" ] || \
1510                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1511                   $(XECHO) "SysClk = 33MHz" ; \
1512                 }
1513         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1514
1515 quad100hd_config:       unconfig
1516         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1517
1518 redwood_config: unconfig
1519         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1520
1521 sbc405_config:  unconfig
1522         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1523
1524 sc3_config:unconfig
1525         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1526
1527 sequoia_config \
1528 rainier_config: unconfig
1529         @mkdir -p $(obj)include
1530         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1531                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1532         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1533
1534 sequoia_nand_config \
1535 rainier_nand_config: unconfig
1536         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1537         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1538         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1539         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1540                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1541         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1542         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1543         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1544
1545 sequoia_ramboot_config \
1546 rainier_ramboot_config: unconfig
1547         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1548         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1549         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1550                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1551         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1552         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1553         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1554                 $(obj)board/amcc/sequoia/config.tmp
1555
1556 taihu_config:   unconfig
1557         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1558
1559 taishan_config: unconfig
1560         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1561
1562 v5fx30teval_config: unconfig
1563         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1564         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1565         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1566                 > $(obj)board/avnet/v5fx30teval/config.tmp
1567         @echo "TEXT_BASE := 0x03000000" \
1568                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1569         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1570
1571 v5fx30teval_flash_config: unconfig
1572         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1573         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1574         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1575                 > $(obj)board/avnet/v5fx30teval/config.tmp
1576         @echo "TEXT_BASE := 0xFF1C0000" \
1577                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1578         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1579
1580 VOH405_config:  unconfig
1581         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1582
1583 VOM405_config:  unconfig
1584         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1585
1586 W7OLMC_config   \
1587 W7OLMG_config: unconfig
1588         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1589
1590 # Walnut & Sycamore images are identical (recognized via PVR)
1591 walnut_config \
1592 sycamore_config: unconfig
1593         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1594
1595 WUH405_config:  unconfig
1596         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1597
1598 xilinx-ppc405-generic_flash_config: unconfig
1599         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1600         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1601                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1602         @echo "TEXT_BASE := 0xFE360000" \
1603                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1604         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1605
1606 xilinx-ppc405-generic_config: unconfig
1607         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1608         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1609                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1610         @echo "TEXT_BASE := 0x04000000" \
1611                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1612         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1613
1614 xilinx-ppc440-generic_flash_config: unconfig
1615         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1616         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1617                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1618         @echo "TEXT_BASE := 0xFE360000" \
1619                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1620         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1621
1622 xilinx-ppc440-generic_config: unconfig
1623         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1624         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1625                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1626         @echo "TEXT_BASE := 0x04000000" \
1627                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1628         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1629
1630 XPEDITE1000_config:     unconfig
1631         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1632
1633 yosemite_config \
1634 yellowstone_config: unconfig
1635         @mkdir -p $(obj)include
1636         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1637                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1638         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1639
1640 yucca_config:   unconfig
1641         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1642
1643 zeus_config:    unconfig
1644         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1645
1646 #########################################################################
1647 ## MPC8220 Systems
1648 #########################################################################
1649
1650 Alaska8220_config       \
1651 Yukon8220_config:       unconfig
1652         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1653
1654 sorcery_config:         unconfig
1655         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1656
1657 #########################################################################
1658 ## MPC824x Systems
1659 #########################################################################
1660 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1661
1662 A3000_config: unconfig
1663         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1664
1665 barco_config: unconfig
1666         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1667
1668 BMW_config: unconfig
1669         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1670
1671 CPC45_config    \
1672 CPC45_ROMBOOT_config:   unconfig
1673         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1674         @cd $(obj)include ;                             \
1675         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1676                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1677                 $(XECHO) "... booting from 8-bit flash" ; \
1678         else \
1679                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1680                 $(XECHO) "... booting from 64-bit flash" ; \
1681         fi; \
1682         echo "export CONFIG_BOOT_ROM" >> config.mk;
1683
1684 CU824_config: unconfig
1685         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1686
1687 debris_config: unconfig
1688         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1689
1690 eXalion_config: unconfig
1691         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1692
1693 HIDDEN_DRAGON_config: unconfig
1694         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1695
1696 kvme080_config: unconfig
1697         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1698
1699 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1700 # time permits.
1701 #linkstation_HDLAN_config \
1702 # Remove this line when HDLAN is fixed
1703 linkstation_HGLAN_config: unconfig
1704         @mkdir -p $(obj)include
1705         @case $@ in \
1706                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1707                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1708         esac
1709         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1710
1711 MOUSSE_config: unconfig
1712         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1713
1714 MUSENKI_config: unconfig
1715         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1716
1717 MVBLUE_config:  unconfig
1718         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1719
1720 OXC_config: unconfig
1721         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1722
1723 PN62_config: unconfig
1724         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1725
1726 Sandpoint8240_config: unconfig
1727         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1728
1729 Sandpoint8245_config: unconfig
1730         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1731
1732 sbc8240_config: unconfig
1733         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1734
1735 SL8245_config: unconfig
1736         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1737
1738 utx8245_config: unconfig
1739         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1740
1741 #########################################################################
1742 ## MPC8260 Systems
1743 #########################################################################
1744
1745 atc_config:     unconfig
1746         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1747
1748 cogent_mpc8260_config:  unconfig
1749         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1750
1751 CPU86_config    \
1752 CPU86_ROMBOOT_config: unconfig
1753         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1754         @cd $(obj)include ;                             \
1755         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1756                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1757                 $(XECHO) "... booting from 8-bit flash" ; \
1758         else \
1759                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1760                 $(XECHO) "... booting from 64-bit flash" ; \
1761         fi; \
1762         echo "export CONFIG_BOOT_ROM" >> config.mk;
1763
1764 CPU87_config    \
1765 CPU87_ROMBOOT_config: unconfig
1766         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1767         @cd $(obj)include ;                             \
1768         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1769                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1770                 $(XECHO) "... booting from 8-bit flash" ; \
1771         else \
1772                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1773                 $(XECHO) "... booting from 64-bit flash" ; \
1774         fi; \
1775         echo "export CONFIG_BOOT_ROM" >> config.mk;
1776
1777 ep8248_config   \
1778 ep8248E_config  :       unconfig
1779         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1780
1781 ep8260_config:  unconfig
1782         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1783
1784 ep82xxm_config: unconfig
1785         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1786
1787 gw8260_config:  unconfig
1788         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1789
1790 hymod_config:   unconfig
1791         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1792
1793 IDS8247_config: unconfig
1794         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1795
1796 IPHASE4539_config:      unconfig
1797         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1798
1799 ISPAN_config            \
1800 ISPAN_REVB_config:      unconfig
1801         @mkdir -p $(obj)include
1802         @if [ "$(findstring _REVB_,$@)" ] ; then \
1803                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1804         fi
1805         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1806
1807 mgcoge_config   :       unconfig
1808         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1809
1810 MPC8260ADS_config       \
1811 MPC8260ADS_lowboot_config       \
1812 MPC8260ADS_33MHz_config \
1813 MPC8260ADS_33MHz_lowboot_config \
1814 MPC8260ADS_40MHz_config \
1815 MPC8260ADS_40MHz_lowboot_config \
1816 MPC8272ADS_config       \
1817 MPC8272ADS_lowboot_config       \
1818 PQ2FADS_config          \
1819 PQ2FADS_lowboot_config          \
1820 PQ2FADS-VR_config       \
1821 PQ2FADS-VR_lowboot_config       \
1822 PQ2FADS-ZU_config       \
1823 PQ2FADS-ZU_lowboot_config       \
1824 PQ2FADS-ZU_66MHz_config \
1825 PQ2FADS-ZU_66MHz_lowboot_config \
1826         :               unconfig
1827         @mkdir -p $(obj)include
1828         @mkdir -p $(obj)board/freescale/mpc8260ads
1829         $(if $(findstring PQ2FADS,$@), \
1830         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1831         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1832         $(if $(findstring MHz,$@), \
1833         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1834         $(if $(findstring VR,$@), \
1835         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1836         @[ -z "$(findstring lowboot_,$@)" ] || \
1837                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1838                   $(XECHO) "... with lowboot configuration" ; \
1839                 }
1840         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1841
1842 MPC8266ADS_config:      unconfig
1843         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1844
1845 muas3001_dev_config \
1846 muas3001_config :       unconfig
1847         @mkdir -p $(obj)include
1848         @mkdir -p $(obj)board/muas3001
1849         @if [ "$(findstring dev,$@)" ] ; then \
1850                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1851         fi
1852         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1853
1854 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1855 PM825_config    \
1856 PM825_ROMBOOT_config    \
1857 PM825_BIGFLASH_config   \
1858 PM825_ROMBOOT_BIGFLASH_config   \
1859 PM826_config    \
1860 PM826_ROMBOOT_config    \
1861 PM826_BIGFLASH_config   \
1862 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1863         @mkdir -p $(obj)include
1864         @mkdir -p $(obj)board/pm826
1865         @if [ "$(findstring PM825_,$@)" ] ; then \
1866                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1867         else \
1868                 >$(obj)include/config.h ; \
1869         fi
1870         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1871                 $(XECHO) "... booting from 8-bit flash" ; \
1872                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1873                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1874                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1875                         $(XECHO) "... with 32 MB Flash" ; \
1876                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1877                 fi; \
1878         else \
1879                 $(XECHO) "... booting from 64-bit flash" ; \
1880                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1881                         $(XECHO) "... with 32 MB Flash" ; \
1882                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1883                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1884                 else \
1885                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1886                 fi; \
1887         fi
1888         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1889
1890 PM828_config    \
1891 PM828_PCI_config        \
1892 PM828_ROMBOOT_config    \
1893 PM828_ROMBOOT_PCI_config:       unconfig
1894         @mkdir -p $(obj)include
1895         @mkdir -p $(obj)board/pm826
1896         @if [ "$(findstring _PCI_,$@)" ] ; then \
1897                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1898                 $(XECHO) "... with PCI enabled" ; \
1899         fi
1900         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1901                 $(XECHO) "... booting from 8-bit flash" ; \
1902                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1903                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1904         fi
1905         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1906
1907 ppmc8260_config:        unconfig
1908         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1909
1910 Rattler8248_config      \
1911 Rattler_config:         unconfig
1912         @mkdir -p $(obj)include
1913         $(if $(findstring 8248,$@), \
1914         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1915         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1916
1917 RPXsuper_config:        unconfig
1918         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1919
1920 rsdproto_config:        unconfig
1921         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1922
1923 sacsng_config:  unconfig
1924         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1925
1926 sbc8260_config: unconfig
1927         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1928
1929 SCM_config:             unconfig
1930         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1931
1932 TQM8255_AA_config \
1933 TQM8260_AA_config \
1934 TQM8260_AB_config \
1935 TQM8260_AC_config \
1936 TQM8260_AD_config \
1937 TQM8260_AE_config \
1938 TQM8260_AF_config \
1939 TQM8260_AG_config \
1940 TQM8260_AH_config \
1941 TQM8260_AI_config \
1942 TQM8265_AA_config:  unconfig
1943         @mkdir -p $(obj)include
1944         @case "$@" in \
1945         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1946         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1947         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1948         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1949         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1950         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1951         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1952         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1953         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1954         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1955         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1956         esac; \
1957         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1958                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1959         fi; \
1960         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1961         echo "... with $${CFREQ}MHz system clock" ; \
1962         if [ "$${CACHE}" = "yes" ] ; then \
1963                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1964                 $(XECHO) "... with L2 Cache support" ; \
1965         else \
1966                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1967                 $(XECHO) "... without L2 Cache support" ; \
1968         fi; \
1969         if [ "$${BMODE}" = "60x" ] ; then \
1970                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1971                 $(XECHO) "... with 60x Bus Mode" ; \
1972         else \
1973                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
1974                 $(XECHO) "... without 60x Bus Mode" ; \
1975         fi
1976         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
1977
1978 TQM8272_config: unconfig
1979         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
1980
1981 VoVPN-GW_66MHz_config   \
1982 VoVPN-GW_100MHz_config:         unconfig
1983         @mkdir -p $(obj)include
1984         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
1985         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
1986
1987 ZPC1900_config: unconfig
1988         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
1989
1990 #########################################################################
1991 ## Coldfire
1992 #########################################################################
1993
1994 M5208EVBE_config :              unconfig
1995         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
1996
1997 M52277EVB_config \
1998 M52277EVB_spansion_config \
1999 M52277EVB_stmicro_config :      unconfig
2000         @case "$@" in \
2001         M52277EVB_config)               FLASH=SPANSION;; \
2002         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2003         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2004         esac; \
2005         if [ "$${FLASH}" = "SPANSION" ] ; then \
2006                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2007                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2008                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2009                 $(XECHO) "... with SPANSION boot..." ; \
2010         fi; \
2011         if [ "$${FLASH}" = "STMICRO" ] ; then \
2012                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2013                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2014                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2015                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2016                 $(XECHO) "... with ST Micro boot..." ; \
2017         fi
2018         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2019
2020 M5235EVB_config \
2021 M5235EVB_Flash16_config \
2022 M5235EVB_Flash32_config:        unconfig
2023         @case "$@" in \
2024         M5235EVB_config)                FLASH=16;; \
2025         M5235EVB_Flash16_config)        FLASH=16;; \
2026         M5235EVB_Flash32_config)        FLASH=32;; \
2027         esac; \
2028         if [ "$${FLASH}" != "16" ] ; then \
2029                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2030                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2031                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2032         else \
2033                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2034                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2035         fi
2036         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2037
2038 M5249EVB_config :               unconfig
2039         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2040
2041 M5253DEMO_config :              unconfig
2042         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2043
2044 M5253EVBE_config :              unconfig
2045         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2046
2047 cobra5272_config :              unconfig
2048         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2049
2050 EB+MCF-EV123_config :           unconfig
2051         @mkdir -p $(obj)include
2052         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2053         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2054         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2055
2056 EB+MCF-EV123_internal_config :  unconfig
2057         @mkdir -p $(obj)include
2058         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2059         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2060         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2061
2062 idmr_config :                   unconfig
2063         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2064
2065 M5271EVB_config :               unconfig
2066         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2067
2068 M5272C3_config :                unconfig
2069         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2070
2071 M5275EVB_config :               unconfig
2072         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2073
2074 M5282EVB_config :               unconfig
2075         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2076
2077 M53017EVB_config :              unconfig
2078         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2079
2080 M5329AFEE_config \
2081 M5329BFEE_config :      unconfig
2082         @case "$@" in \
2083         M5329AFEE_config)       NAND=0;; \
2084         M5329BFEE_config)       NAND=16;; \
2085         esac; \
2086         if [ "$${NAND}" != "0" ] ; then \
2087                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2088         fi
2089         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2090
2091 M5373EVB_config :       unconfig
2092         @case "$@" in \
2093         M5373EVB_config)        NAND=16;; \
2094         esac; \
2095         if [ "$${NAND}" != "0" ] ; then \
2096                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2097         fi
2098         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2099
2100 M54451EVB_config \
2101 M54451EVB_stmicro_config :      unconfig
2102         @case "$@" in \
2103         M54451EVB_config)               FLASH=NOR;; \
2104         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2105         esac; \
2106         if [ "$${FLASH}" = "NOR" ] ; then \
2107                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2108                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2109                 $(XECHO) "... with NOR boot..." ; \
2110         fi; \
2111         if [ "$${FLASH}" = "STMICRO" ] ; then \
2112                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2113                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2114                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2115                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2116                 $(XECHO) "... with ST Micro boot..." ; \
2117         fi; \
2118         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2119         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2120
2121 M54455EVB_config \
2122 M54455EVB_atmel_config \
2123 M54455EVB_intel_config \
2124 M54455EVB_a33_config \
2125 M54455EVB_a66_config \
2126 M54455EVB_i33_config \
2127 M54455EVB_i66_config \
2128 M54455EVB_stm33_config :        unconfig
2129         @case "$@" in \
2130         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2131         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2132         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2133         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2134         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2135         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2136         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2137         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2138         esac; \
2139         if [ "$${FLASH}" = "INTEL" ] ; then \
2140                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2141                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2142                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2143                 $(XECHO) "... with INTEL boot..." ; \
2144         fi; \
2145         if [ "$${FLASH}" = "ATMEL" ] ; then \
2146                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2147                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2148                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2149                 $(XECHO) "... with ATMEL boot..." ; \
2150         fi; \
2151         if [ "$${FLASH}" = "STMICRO" ] ; then \
2152                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2153                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2154                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2155                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2156                 $(XECHO) "... with ST Micro boot..." ; \
2157         fi; \
2158         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2159         $(XECHO) "... with $${FREQ}Hz input clock"
2160         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2161
2162 M5475AFE_config \
2163 M5475BFE_config \
2164 M5475CFE_config \
2165 M5475DFE_config \
2166 M5475EFE_config \
2167 M5475FFE_config \
2168 M5475GFE_config :       unconfig
2169         @case "$@" in \
2170         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2171         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2172         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2173         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2174         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2175         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2176         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2177         esac; \
2178         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2179         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2180         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2181         if [ "$${RAM1}" != "0" ] ; then \
2182                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2183         fi; \
2184         if [ "$${CODE}" != "0" ] ; then \
2185                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2186         fi; \
2187         if [ "$${VID}" == "1" ] ; then \
2188                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2189         fi; \
2190         if [ "$${USB}" == "1" ] ; then \
2191                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2192         fi
2193         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2194
2195 M5485AFE_config \
2196 M5485BFE_config \
2197 M5485CFE_config \
2198 M5485DFE_config \
2199 M5485EFE_config \
2200 M5485FFE_config \
2201 M5485GFE_config \
2202 M5485HFE_config :       unconfig
2203         @case "$@" in \
2204         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2205         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2206         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2207         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2208         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2209         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2210         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2211         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2212         esac; \
2213         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2214         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2215         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2216         if [ "$${RAM1}" != "0" ] ; then \
2217                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2218         fi; \
2219         if [ "$${CODE}" != "0" ] ; then \
2220                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2221         fi; \
2222         if [ "$${VID}" == "1" ] ; then \
2223                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2224         fi; \
2225         if [ "$${USB}" == "1" ] ; then \
2226                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2227         fi
2228         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2229
2230 TASREG_config :         unconfig
2231         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2232
2233 #########################################################################
2234 ## MPC83xx Systems
2235 #########################################################################
2236
2237 kmeter1_config: unconfig
2238         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2239
2240 MPC8313ERDB_33_config \
2241 MPC8313ERDB_66_config \
2242 MPC8313ERDB_NAND_33_config \
2243 MPC8313ERDB_NAND_66_config: unconfig
2244         @mkdir -p $(obj)include
2245         @mkdir -p $(obj)board/freescale/mpc8313erdb
2246         @if [ "$(findstring _33_,$@)" ] ; then \
2247                 $(XECHO) -n "...33M ..." ; \
2248                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2249         fi ; \
2250         if [ "$(findstring _66_,$@)" ] ; then \
2251                 $(XECHO) -n "...66M..." ; \
2252                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2253         fi ; \
2254         if [ "$(findstring _NAND_,$@)" ] ; then \
2255                 $(XECHO) -n "...NAND..." ; \
2256                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2257                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2258         fi ;
2259         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2260         @if [ "$(findstring _NAND_,$@)" ] ; then \
2261                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2262         fi ;
2263
2264 MPC8315ERDB_NAND_config \
2265 MPC8315ERDB_config: unconfig
2266         @if [ "$(findstring _NAND_,$@)" ] ; then \
2267                 ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
2268         fi ;
2269         @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2270
2271 MPC8323ERDB_config:     unconfig
2272         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2273
2274 MPC832XEMDS_config \
2275 MPC832XEMDS_HOST_33_config \
2276 MPC832XEMDS_HOST_66_config \
2277 MPC832XEMDS_SLAVE_config \
2278 MPC832XEMDS_ATM_config: unconfig
2279         @mkdir -p $(obj)include
2280         @if [ "$(findstring _HOST_,$@)" ] ; then \
2281                 $(XECHO) -n "... PCI HOST " ; \
2282                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2283         fi ; \
2284         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2285                 $(XECHO) "...PCI SLAVE 66M"  ; \
2286                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2287                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2288         fi ; \
2289         if [ "$(findstring _33_,$@)" ] ; then \
2290                 $(XECHO) -n "...33M ..." ; \
2291                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2292                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2293         fi ; \
2294         if [ "$(findstring _66_,$@)" ] ; then \
2295                 $(XECHO) -n "...66M..." ; \
2296                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2297                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2298         fi ; \
2299         if [ "$(findstring _ATM_,$@)" ] ; then \
2300                 $(XECHO) -n "...ATM..." ; \
2301                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2302                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2303         fi ;
2304         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2305
2306 MPC8349EMDS_config:     unconfig
2307         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2308
2309 MPC8349ITX_config \
2310 MPC8349ITX_LOWBOOT_config \
2311 MPC8349ITXGP_config:    unconfig
2312         @mkdir -p $(obj)include
2313         @mkdir -p $(obj)board/freescale/mpc8349itx
2314         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2315         @if [ "$(findstring GP,$@)" ] ; then \
2316                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2317         fi
2318         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2319                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2320         fi
2321         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2322
2323 MPC8360EMDS_config \
2324 MPC8360EMDS_HOST_33_config \
2325 MPC8360EMDS_HOST_66_config \
2326 MPC8360EMDS_SLAVE_config \
2327 MPC8360EMDS_ATM_config: unconfig
2328         @mkdir -p $(obj)include
2329         @if [ "$(findstring _HOST_,$@)" ] ; then \
2330                 $(XECHO) -n "... PCI HOST " ; \
2331                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2332         fi ; \
2333         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2334                 $(XECHO) "...PCI SLAVE 66M"  ; \
2335                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2336                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2337         fi ; \
2338         if [ "$(findstring _33_,$@)" ] ; then \
2339                 $(XECHO) -n "...33M ..." ; \
2340                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2341                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2342         fi ; \
2343         if [ "$(findstring _66_,$@)" ] ; then \
2344                 $(XECHO) -n "...66M..." ; \
2345                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2346                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2347         fi ; \
2348         if [ "$(findstring _ATM_,$@)" ] ; then \
2349                 $(XECHO) -n "...ATM..." ; \
2350                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2351                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2352         fi ;
2353         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2354
2355 MPC8360ERDK_33_config \
2356 MPC8360ERDK_66_config \
2357 MPC8360ERDK_config:     unconfig
2358         @mkdir -p $(obj)include
2359         @if [ "$(findstring _33_,$@)" ] ; then \
2360                 $(XECHO) -n "... CLKIN 33MHz " ; \
2361                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2362         fi ;
2363         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2364
2365 MPC837XEMDS_config \
2366 MPC837XEMDS_HOST_config:        unconfig
2367         @mkdir -p $(obj)include
2368         @if [ "$(findstring _HOST_,$@)" ] ; then \
2369                 $(XECHO) -n "... PCI HOST " ; \
2370                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2371         fi ;
2372         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2373
2374 MPC837XERDB_config:     unconfig
2375         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2376
2377 MVBLM7_config: unconfig
2378         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2379
2380 sbc8349_config \
2381 sbc8349_PCI_33_config \
2382 sbc8349_PCI_66_config: unconfig
2383         @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
2384
2385 SIMPC8313_LP_config \
2386 SIMPC8313_SP_config: unconfig
2387         @mkdir -p $(obj)include
2388         @mkdir -p $(obj)board/sheldon/simpc8313
2389         @if [ "$(findstring _LP_,$@)" ] ; then \
2390                 $(XECHO) -n "...Large Page NAND..." ; \
2391                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2392         fi ; \
2393         if [ "$(findstring _SP_,$@)" ] ; then \
2394                 $(XECHO) -n "...Small Page NAND..." ; \
2395                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2396         fi ;
2397         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2398         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2399
2400 TQM834x_config: unconfig
2401         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2402
2403 caddy2_config \
2404 vme8349_config:         unconfig
2405         @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
2406
2407 #########################################################################
2408 ## MPC85xx Systems
2409 #########################################################################
2410
2411 ATUM8548_config:        unconfig
2412         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2413
2414 MPC8536DS_NAND_config \
2415 MPC8536DS_SDCARD_config \
2416 MPC8536DS_SPIFLASH_config \
2417 MPC8536DS_36BIT_config \
2418 MPC8536DS_config:       unconfig
2419         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2420
2421 MPC8540ADS_config:      unconfig
2422         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2423
2424 MPC8540EVAL_config \
2425 MPC8540EVAL_33_config \
2426 MPC8540EVAL_66_config \
2427 MPC8540EVAL_33_slave_config \
2428 MPC8540EVAL_66_slave_config:      unconfig
2429         @mkdir -p $(obj)include
2430         @if [ "$(findstring _33_,$@)" ] ; then \
2431                 $(XECHO) "... 33 MHz PCI" ; \
2432         else \
2433                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2434                 $(XECHO) "... 66 MHz PCI" ; \
2435         fi ; \
2436         if [ "$(findstring _slave_,$@)" ] ; then \
2437                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2438                 $(XECHO) " slave" ; \
2439         else \
2440                 $(XECHO) " host" ; \
2441         fi
2442         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2443
2444 MPC8560ADS_config:      unconfig
2445         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2446
2447 MPC8541CDS_legacy_config \
2448 MPC8541CDS_config:      unconfig
2449         @mkdir -p $(obj)include
2450         @if [ "$(findstring _legacy_,$@)" ] ; then \
2451                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2452                 $(XECHO) "... legacy" ; \
2453         fi
2454         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2455
2456 MPC8544DS_config:       unconfig
2457         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2458
2459 MPC8548CDS_legacy_config \
2460 MPC8548CDS_config:      unconfig
2461         @mkdir -p $(obj)include
2462         @if [ "$(findstring _legacy_,$@)" ] ; then \
2463                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2464                 $(XECHO) "... legacy" ; \
2465         fi
2466         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2467
2468 MPC8555CDS_legacy_config \
2469 MPC8555CDS_config:      unconfig
2470         @mkdir -p $(obj)include
2471         @if [ "$(findstring _legacy_,$@)" ] ; then \
2472                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2473                 $(XECHO) "... legacy" ; \
2474         fi
2475         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2476
2477 MPC8568MDS_config:      unconfig
2478         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2479
2480 MPC8569MDS_config:      unconfig
2481         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2482
2483 MPC8572DS_36BIT_config \
2484 MPC8572DS_config:       unconfig
2485         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2486
2487 P2020DS_36BIT_config \
2488 P2020DS_config:         unconfig
2489         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2490
2491 P1011RDB_config \
2492 P1011RDB_NAND_config \
2493 P1011RDB_SDCARD_config \
2494 P1011RDB_SPIFLASH_config \
2495 P1020RDB_config \
2496 P1020RDB_NAND_config \
2497 P1020RDB_SDCARD_config \
2498 P1020RDB_SPIFLASH_config \
2499 P2010RDB_config \
2500 P2010RDB_NAND_config \
2501 P2010RDB_SDCARD_config \
2502 P2010RDB_SPIFLASH_config \
2503 P2020RDB_config \
2504 P2020RDB_NAND_config \
2505 P2020RDB_SDCARD_config \
2506 P2020RDB_SPIFLASH_config:       unconfig
2507         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2508
2509 PM854_config:   unconfig
2510         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2511
2512 PM856_config:   unconfig
2513         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2514
2515 sbc8540_config \
2516 sbc8540_33_config \
2517 sbc8540_66_config:      unconfig
2518         @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
2519
2520 sbc8548_config \
2521 sbc8548_PCI_33_config \
2522 sbc8548_PCI_66_config \
2523 sbc8548_PCI_33_PCIE_config \
2524 sbc8548_PCI_66_PCIE_config: unconfig
2525         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2526
2527 sbc8560_config \
2528 sbc8560_33_config \
2529 sbc8560_66_config:      unconfig
2530         @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
2531
2532 socrates_config:        unconfig
2533         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2534
2535 stxgp3_config:          unconfig
2536         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2537
2538 stxssa_config           \
2539 stxssa_4M_config:       unconfig
2540         @mkdir -p $(obj)include
2541         @if [ "$(findstring _4M_,$@)" ] ; then \
2542                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2543                 $(XECHO) "... with 4 MiB flash memory" ; \
2544         fi
2545         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2546
2547 TQM8540_config          \
2548 TQM8541_config          \
2549 TQM8548_config          \
2550 TQM8548_AG_config       \
2551 TQM8548_BE_config       \
2552 TQM8555_config          \
2553 TQM8560_config:         unconfig
2554         @mkdir -p $(obj)include
2555         @BTYPE=$(@:_config=); \
2556         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2557         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2558         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2559         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2560         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2561         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2562         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2563         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2564
2565 XPEDITE5200_config:     unconfig
2566         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2567
2568 XPEDITE5370_config:     unconfig
2569         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2570
2571 #########################################################################
2572 ## MPC86xx Systems
2573 #########################################################################
2574
2575 MPC8610HPCD_config:     unconfig
2576         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2577
2578 MPC8641HPCN_36BIT_config \
2579 MPC8641HPCN_config:    unconfig
2580         @mkdir -p $(obj)include
2581         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2582                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2583                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2584         fi
2585         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2586
2587 sbc8641d_config:        unconfig
2588         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2589
2590 XPEDITE5170_config:     unconfig
2591         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2592
2593 #########################################################################
2594 ## 74xx/7xx Systems
2595 #########################################################################
2596
2597 AmigaOneG3SE_config:    unconfig
2598         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2599
2600 BAB7xx_config: unconfig
2601         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2602
2603 CPCI750_config: unconfig
2604         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2605
2606 DB64360_config: unconfig
2607         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2608
2609 DB64460_config: unconfig
2610         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2611
2612 ELPPC_config: unconfig
2613         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2614
2615 EVB64260_config \
2616 EVB64260_750CX_config:  unconfig
2617         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2618
2619 mpc7448hpc2_config:  unconfig
2620         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2621
2622 P3G4_config: unconfig
2623         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2624
2625 p3m750_config   \
2626 p3m7448_config:         unconfig
2627         @mkdir -p $(obj)include
2628         @if [ "$(findstring 750_,$@)" ] ; then \
2629                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2630         else \
2631                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2632         fi
2633         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2634
2635 PCIPPC2_config \
2636 PCIPPC6_config: unconfig
2637         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2638
2639 ppmc7xx_config: unconfig
2640         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2641
2642 ZUMA_config:    unconfig
2643         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2644
2645 #========================================================================
2646 # ARM
2647 #========================================================================
2648 #########################################################################
2649 ## StrongARM Systems
2650 #########################################################################
2651
2652 assabet_config  :       unconfig
2653         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2654
2655 dnp1110_config  :       unconfig
2656         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2657
2658 gcplus_config   :       unconfig
2659         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2660
2661 lart_config     :       unconfig
2662         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2663
2664 shannon_config  :       unconfig
2665         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2666
2667 #########################################################################
2668 ## ARM92xT Systems
2669 #########################################################################
2670
2671 a320evb_config  :       unconfig
2672         @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
2673
2674 #########################################################################
2675 ## Atmel AT91RM9200 Systems
2676 #########################################################################
2677
2678 at91rm9200dk_config     :       unconfig
2679         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2680
2681 at91rm9200ek_config     :       unconfig
2682         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2683
2684 cmc_pu2_config  :       unconfig
2685         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2686
2687 CPUAT91_RAM_config \
2688 CPUAT91_config  :       unconfig
2689         @mkdir -p $(obj)include
2690         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2691         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2692
2693 csb637_config   :       unconfig
2694         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2695
2696 kb9202_config   :       unconfig
2697         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2698
2699 m501sk_config   :       unconfig
2700         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2701
2702 mp2usb_config   :       unconfig
2703         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2704
2705 #########################################################################
2706 ## Atmel ARM926EJ-S Systems
2707 #########################################################################
2708
2709 afeb9260_config:        unconfig
2710         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2711
2712 at91cap9adk_config      :       unconfig
2713         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2714
2715 at91sam9260ek_nandflash_config \
2716 at91sam9260ek_dataflash_cs0_config \
2717 at91sam9260ek_dataflash_cs1_config \
2718 at91sam9260ek_config \
2719 at91sam9g20ek_nandflash_config \
2720 at91sam9g20ek_dataflash_cs0_config \
2721 at91sam9g20ek_dataflash_cs1_config \
2722 at91sam9g20ek_config    :       unconfig
2723         @mkdir -p $(obj)include
2724         @if [ "$(findstring 9g20,$@)" ] ; then \
2725                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2726                 $(XECHO) "... 9G20 Variant" ; \
2727         else \
2728                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2729         fi;
2730         @if [ "$(findstring _nandflash,$@)" ] ; then \
2731                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2732                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2733         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2734                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2735                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2736         else \
2737                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2738                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2739         fi;
2740         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2741
2742 at91sam9xeek_nandflash_config \
2743 at91sam9xeek_dataflash_cs0_config \
2744 at91sam9xeek_dataflash_cs1_config \
2745 at91sam9xeek_config     :       unconfig
2746         @mkdir -p $(obj)include
2747         @if [ "$(findstring _nandflash,$@)" ] ; then \
2748                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2749                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2750         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2751                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2752                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2753         else \
2754                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2755                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2756         fi;
2757         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2758
2759 at91sam9261ek_nandflash_config \
2760 at91sam9261ek_dataflash_cs0_config \
2761 at91sam9261ek_dataflash_cs3_config \
2762 at91sam9261ek_config \
2763 at91sam9g10ek_nandflash_config \
2764 at91sam9g10ek_dataflash_cs0_config \
2765 at91sam9g10ek_dataflash_cs3_config \
2766 at91sam9g10ek_config    :       unconfig
2767         @mkdir -p $(obj)include
2768         @if [ "$(findstring 9g10,$@)" ] ; then \
2769                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2770                 $(XECHO) "... 9G10 Variant" ; \
2771         else \
2772                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2773         fi;
2774         @if [ "$(findstring _nandflash,$@)" ] ; then \
2775                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2776                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2777         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2778                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2779                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2780         else \
2781                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2782                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2783         fi;
2784         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2785
2786 at91sam9263ek_norflash_config \
2787 at91sam9263ek_norflash_boot_config \
2788 at91sam9263ek_nandflash_config \
2789 at91sam9263ek_dataflash_config \
2790 at91sam9263ek_dataflash_cs0_config \
2791 at91sam9263ek_config    :       unconfig
2792         @mkdir -p $(obj)include
2793         @if [ "$(findstring _nandflash,$@)" ] ; then \
2794                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2795                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2796         elif [ "$(findstring norflash,$@)" ] ; then \
2797                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2798                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2799         else \
2800                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2801                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2802         fi;
2803         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2804                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2805                 $(XECHO) "... and boot from NOR FLASH" ; \
2806         fi;
2807         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2808
2809 at91sam9rlek_nandflash_config \
2810 at91sam9rlek_dataflash_config \
2811 at91sam9rlek_dataflash_cs0_config \
2812 at91sam9rlek_config     :       unconfig
2813         @mkdir -p $(obj)include
2814         @if [ "$(findstring _nandflash,$@)" ] ; then \
2815                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2816                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2817         else \
2818                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2819                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2820         fi;
2821         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2822
2823 CPU9G20_128M_config \
2824 CPU9G20_config \
2825 CPU9260_128M_config \
2826 CPU9260_config  :       unconfig
2827         @mkdir -p $(obj)include
2828         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2829         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2830
2831 meesc_config    :       unconfig
2832         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2833
2834 pm9261_config   :       unconfig
2835         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2836
2837 at91sam9m10g45ek_nandflash_config \
2838 at91sam9m10g45ek_dataflash_config \
2839 at91sam9m10g45ek_dataflash_cs0_config \
2840 at91sam9m10g45ek_config \
2841 at91sam9g45ekes_nandflash_config \
2842 at91sam9g45ekes_dataflash_config \
2843 at91sam9g45ekes_dataflash_cs0_config \
2844 at91sam9g45ekes_config  :       unconfig
2845         @mkdir -p $(obj)include
2846                 @if [ "$(findstring 9m10,$@)" ] ; then \
2847                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2848                 $(XECHO) "... 9M10G45 Variant" ; \
2849         else \
2850                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2851         fi;
2852
2853         @if [ "$(findstring _nandflash,$@)" ] ; then \
2854                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2855                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2856         else \
2857                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2858                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2859         fi;
2860         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2861
2862 pm9263_config   :       unconfig
2863         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2864
2865 SBC35_A9G20_NANDFLASH_config \
2866 SBC35_A9G20_EEPROM_config \
2867 SBC35_A9G20_config      :       unconfig
2868         @mkdir -p $(obj)include
2869         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2870         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2871
2872 TNY_A9G20_NANDFLASH_config \
2873 TNY_A9G20_EEPROM_config \
2874 TNY_A9G20_config \
2875 TNY_A9260_NANDFLASH_config \
2876 TNY_A9260_EEPROM_config \
2877 TNY_A9260_config        :       unconfig
2878         @mkdir -p $(obj)include
2879         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2880         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2881
2882 ########################################################################
2883 ## ARM Integrator boards - see doc/README-integrator for more info.
2884 integratorap_config     \
2885 ap_config               \
2886 ap966_config            \
2887 ap922_config            \
2888 ap922_XA10_config       \
2889 ap7_config              \
2890 ap720t_config           \
2891 ap920t_config           \
2892 ap926ejs_config         \
2893 ap946es_config: unconfig
2894         @board/armltd/integrator/split_by_variant.sh ap $@
2895
2896 integratorcp_config     \
2897 cp_config               \
2898 cp920t_config           \
2899 cp926ejs_config         \
2900 cp946es_config          \
2901 cp1136_config           \
2902 cp966_config            \
2903 cp922_config            \
2904 cp922_XA10_config       \
2905 cp1026_config: unconfig
2906         @board/armltd/integrator/split_by_variant.sh cp $@
2907
2908 da830evm_config:        unconfig
2909         @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
2910
2911 davinci_dvevm_config :  unconfig
2912         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2913
2914 davinci_schmoogie_config :      unconfig
2915         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2916
2917 davinci_sffsdr_config : unconfig
2918         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2919
2920 davinci_sonata_config : unconfig
2921         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2922
2923 davinci_dm355evm_config :       unconfig
2924         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2925
2926 davinci_dm355leopard_config :   unconfig
2927         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2928
2929 davinci_dm365evm_config :       unconfig
2930         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2931
2932 davinci_dm6467evm_config :      unconfig
2933         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2934
2935 imx27lite_config:       unconfig
2936         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2937
2938 lpd7a400_config \
2939 lpd7a404_config:        unconfig
2940         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2941
2942 mv88f6281gtw_ge_config: unconfig
2943         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2944
2945 mx1ads_config   :       unconfig
2946         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2947
2948 mx1fs2_config   :       unconfig
2949         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2950
2951 netstar_config:         unconfig
2952         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2953
2954 nhk8815_config \
2955 nhk8815_onenand_config: unconfig
2956         @mkdir -p $(obj)include
2957         @ > $(obj)include/config.h
2958         @if [ "$(findstring _onenand, $@)" ] ; then \
2959                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2960                 $(XECHO) "... configured to boot from OneNand Flash"; \
2961         else \
2962                 $(XECHO) "... configured to boot from Nand Flash"; \
2963         fi
2964         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2965
2966 omap1510inn_config :    unconfig
2967         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2968
2969 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2970
2971 omap1610inn_config \
2972 omap1610inn_cs0boot_config \
2973 omap1610inn_cs3boot_config \
2974 omap1610inn_cs_autoboot_config \
2975 omap1610h2_config \
2976 omap1610h2_cs0boot_config \
2977 omap1610h2_cs3boot_config \
2978 omap1610h2_cs_autoboot_config:  unconfig
2979         @mkdir -p $(obj)include
2980         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
2981                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
2982                 $(XECHO) "... configured for CS0 boot"; \
2983         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
2984                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
2985                 $(XECHO) "... configured for CS_AUTO boot"; \
2986         else \
2987                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
2988                 $(XECHO) "... configured for CS3 boot"; \
2989         fi;
2990         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
2991
2992 omap5912osk_config :    unconfig
2993         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
2994
2995 openrd_base_config: unconfig
2996         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2997
2998 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
2999
3000 omap730p2_config \
3001 omap730p2_cs0boot_config \
3002 omap730p2_cs3boot_config :      unconfig
3003         @mkdir -p $(obj)include
3004         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3005                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3006                 $(XECHO) "... configured for CS0 boot"; \
3007         else \
3008                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3009                 $(XECHO) "... configured for CS3 boot"; \
3010         fi;
3011         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3012
3013 rd6281a_config: unconfig
3014         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3015
3016 sbc2410x_config: unconfig
3017         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3018
3019 scb9328_config  :       unconfig
3020         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3021
3022 sheevaplug_config: unconfig
3023         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3024
3025 smdk2400_config :       unconfig
3026         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3027
3028 smdk2410_config :       unconfig
3029         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3030
3031 SX1_stdout_serial_config \
3032 SX1_config:             unconfig
3033         @mkdir -p $(obj)include
3034         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3035                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3036                 $(XECHO) "... configured for stdout serial"; \
3037         else \
3038                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3039                 $(XECHO) "... configured for stdout usbtty"; \
3040         fi;
3041         @$(MKCONFIG) SX1 arm arm925t sx1
3042
3043 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3044 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3045
3046 trab_config \
3047 trab_bigram_config \
3048 trab_bigflash_config \
3049 trab_old_config:        unconfig
3050         @mkdir -p $(obj)include
3051         @mkdir -p $(obj)board/trab
3052         @[ -z "$(findstring _bigram,$@)" ] || \
3053                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3054                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3055                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3056                 }
3057         @[ -z "$(findstring _bigflash,$@)" ] || \
3058                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3059                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3060                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3061                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3062                 }
3063         @[ -z "$(findstring _old,$@)" ] || \
3064                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3065                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3066                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3067                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3068                 }
3069         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3070
3071 VCMA9_config    :       unconfig
3072         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3073
3074 #########################################################################
3075 # ARM supplied Versatile development boards
3076 #########################################################################
3077
3078 cm4008_config   :       unconfig
3079         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3080
3081 cm41xx_config   :       unconfig
3082         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3083
3084 versatile_config        \
3085 versatileab_config      \
3086 versatilepb_config :    unconfig
3087         @board/armltd/versatile/split_by_variant.sh $@
3088
3089 voiceblue_config:       unconfig
3090         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3091
3092 #########################################################################
3093 ## S3C44B0 Systems
3094 #########################################################################
3095
3096 B2_config       :       unconfig
3097         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3098
3099 #########################################################################
3100 ## ARM720T Systems
3101 #########################################################################
3102
3103 armadillo_config:       unconfig
3104         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3105
3106 ep7312_config   :       unconfig
3107         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3108
3109 impa7_config    :       unconfig
3110         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3111
3112 modnet50_config :       unconfig
3113         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3114
3115 evb4510_config :        unconfig
3116         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3117
3118 lpc2292sodimm_config:   unconfig
3119         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3120
3121 SMN42_config    :       unconfig
3122         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3123
3124 #########################################################################
3125 ## ARM CORTEX Systems
3126 #########################################################################
3127
3128 devkit8000_config :     unconfig
3129         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3130
3131 omap3_beagle_config :   unconfig
3132         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3133
3134 omap3_overo_config :    unconfig
3135         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3136
3137 omap3_evm_config :      unconfig
3138         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3139
3140 omap3_pandora_config :  unconfig
3141         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3142
3143 omap3_sdp3430_config :  unconfig
3144         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3145
3146 omap3_zoom1_config :    unconfig
3147         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3148
3149 omap3_zoom2_config :    unconfig
3150         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3151
3152 smdkc100_config:        unconfig
3153         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3154
3155 #########################################################################
3156 ## XScale Systems
3157 #########################################################################
3158
3159 actux1_config   :       unconfig
3160         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3161
3162 actux2_config   :       unconfig
3163         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3164
3165 actux3_config   :       unconfig
3166         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3167
3168 actux4_config   :       unconfig
3169         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3170
3171 cerf250_config :        unconfig
3172         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3173
3174 cradle_config   :       unconfig
3175         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3176
3177 csb226_config   :       unconfig
3178         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3179
3180 delta_config :  unconfig
3181         @$(MKCONFIG) $(@:_config=) arm pxa delta
3182
3183 innokom_config  :       unconfig
3184         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3185
3186 ixdp425_config  :       unconfig
3187         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3188
3189 ixdpg425_config :       unconfig
3190         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3191
3192 lubbock_config  :       unconfig
3193         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3194
3195 pleb2_config    :       unconfig
3196         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3197
3198 logodl_config   :       unconfig
3199         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3200
3201 pdnb3_config \
3202 scpu_config:    unconfig
3203         @mkdir -p $(obj)include
3204         @if [ "$(findstring scpu_,$@)" ] ; then \
3205                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3206                 $(XECHO) "... on SCPU board variant" ; \
3207         fi
3208         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3209
3210 pxa255_idp_config:      unconfig
3211         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3212
3213 polaris_config \
3214 trizepsiv_config        :       unconfig
3215         @mkdir -p $(obj)include
3216         @if [ "$(findstring polaris,$@)" ] ; then \
3217                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3218         fi;
3219         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3220
3221 wepep250_config :       unconfig
3222         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3223
3224 xaeniax_config  :       unconfig
3225         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3226
3227 xm250_config    :       unconfig
3228         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3229
3230 xsengine_config :       unconfig
3231         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3232
3233 zylonite_config :
3234         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3235
3236 #########################################################################
3237 ## ARM1136 Systems
3238 #########################################################################
3239
3240 apollon_config          : unconfig
3241         @mkdir -p $(obj)include
3242         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3243         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3244         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3245
3246 imx31_litekit_config    : unconfig
3247         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3248
3249 imx31_phycore_eet_config \
3250 imx31_phycore_config    : unconfig
3251         @mkdir -p $(obj)include
3252         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3253                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3254         fi
3255         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3256
3257 mx31ads_config          : unconfig
3258         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3259
3260 mx31pdk_config \
3261 mx31pdk_nand_config     : unconfig
3262         @mkdir -p $(obj)include
3263         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3264                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3265         else                                                                            \
3266                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3267                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3268         fi
3269         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3270
3271 omap2420h4_config       : unconfig
3272         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3273
3274 qong_config             : unconfig
3275         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3276
3277 #########################################################################
3278 ## ARM1176 Systems
3279 #########################################################################
3280 smdk6400_noUSB_config   \
3281 smdk6400_config :       unconfig
3282         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3283         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3284         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3285         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3286                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3287                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3288         else                                                                            \
3289                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3290                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3291         fi
3292         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3293
3294 #========================================================================
3295 # i386
3296 #========================================================================
3297 #########################################################################
3298 ## AMD SC520 CDP
3299 #########################################################################
3300 eNET_config     :       unconfig
3301         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3302
3303 sc520_cdp_config        :       unconfig
3304         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3305
3306 sc520_spunk_config      :       unconfig
3307         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3308
3309 sc520_spunk_rel_config  :       unconfig
3310         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3311
3312 #========================================================================
3313 # MIPS
3314 #========================================================================
3315 #########################################################################
3316 ## MIPS32 4Kc
3317 #########################################################################
3318
3319 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3320
3321 incaip_100MHz_config    \
3322 incaip_133MHz_config    \
3323 incaip_150MHz_config    \
3324 incaip_config: unconfig
3325         @mkdir -p $(obj)include
3326         @[ -z "$(findstring _100MHz,$@)" ] || \
3327                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3328                   $(XECHO) "... with 100MHz system clock" ; \
3329                 }
3330         @[ -z "$(findstring _133MHz,$@)" ] || \
3331                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3332                   $(XECHO) "... with 133MHz system clock" ; \
3333                 }
3334         @[ -z "$(findstring _150MHz,$@)" ] || \
3335                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3336                   $(XECHO) "... with 150MHz system clock" ; \
3337                 }
3338         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3339
3340 tb0229_config: unconfig
3341         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3342
3343 vct_premium_config              \
3344 vct_premium_small_config        \
3345 vct_premium_onenand_config      \
3346 vct_premium_onenand_small_config \
3347 vct_platinum_config             \
3348 vct_platinum_small_config       \
3349 vct_platinum_onenand_config     \
3350 vct_platinum_onenand_small_config \
3351 vct_platinumavc_config          \
3352 vct_platinumavc_small_config    \
3353 vct_platinumavc_onenand_config  \
3354 vct_platinumavc_onenand_small_config: unconfig
3355         @mkdir -p $(obj)include
3356         @if [ "$(findstring _premium,$@)" ] ; then \
3357                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3358                 $(XECHO) "... on Premium board variant" ; \
3359         fi
3360         @if [ "$(findstring _platinum_,$@)" ] ; then \
3361                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3362                 $(XECHO) "... on Platinum board variant" ; \
3363         fi
3364         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3365                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3366                 $(XECHO) "... on PlatinumAVC board variant" ; \
3367         fi
3368         @if [ "$(findstring _onenand,$@)" ] ; then \
3369                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3370                 $(XECHO) "... on OneNAND board variant" ; \
3371         fi
3372         @if [ "$(findstring _small,$@)" ] ; then \
3373                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3374                 $(XECHO) "... stripped down image variant" ; \
3375         fi
3376         @$(MKCONFIG) -a vct mips mips vct micronas
3377
3378 #########################################################################
3379 ## MIPS32 AU1X00
3380 #########################################################################
3381
3382 dbau1000_config         :       unconfig
3383         @mkdir -p $(obj)include
3384         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3385         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3386
3387 dbau1100_config         :       unconfig
3388         @mkdir -p $(obj)include
3389         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3390         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3391
3392 dbau1500_config         :       unconfig
3393         @mkdir -p $(obj)include
3394         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3395         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3396
3397 dbau1550_config         :       unconfig
3398         @mkdir -p $(obj)include
3399         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3400         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3401
3402 dbau1550_el_config      :       unconfig
3403         @mkdir -p $(obj)include
3404         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3405         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3406
3407 gth2_config             :       unconfig
3408         @mkdir -p $(obj)include
3409         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3410         @$(MKCONFIG) -a gth2 mips mips gth2
3411
3412 pb1000_config           :       unconfig
3413         @mkdir -p $(obj)include
3414         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3415         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3416
3417 qemu_mips_config        : unconfig
3418         @mkdir -p $(obj)include
3419         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3420         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3421
3422 #########################################################################
3423 ## MIPS64 5Kc
3424 #########################################################################
3425
3426 purple_config :         unconfig
3427         @$(MKCONFIG) $(@:_config=) mips mips purple
3428
3429 #========================================================================
3430 # Nios
3431 #========================================================================
3432 #########################################################################
3433 ## Nios32
3434 #########################################################################
3435
3436 ADNPESC1_DNPEVA2_base_32_config \
3437 ADNPESC1_base_32_config         \
3438 ADNPESC1_config: unconfig
3439         @mkdir -p $(obj)include
3440         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3441                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3442                   $(XECHO) "... DNP/EVA2 configuration" ; \
3443                 }
3444         @[ -z "$(findstring _base_32,$@)" ] || \
3445                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3446                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3447                 }
3448         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3449                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3450                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3451                 }
3452         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3453
3454 DK1C20_safe_32_config           \
3455 DK1C20_standard_32_config       \
3456 DK1C20_config:  unconfig
3457         @mkdir -p $(obj)include
3458         @[ -z "$(findstring _safe_32,$@)" ] || \
3459                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3460                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3461                 }
3462         @[ -z "$(findstring _standard_32,$@)" ] || \
3463                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3464                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3465                 }
3466         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3467                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3468                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3469                 }
3470         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3471
3472 DK1S10_safe_32_config           \
3473 DK1S10_standard_32_config       \
3474 DK1S10_mtx_ldk_20_config        \
3475 DK1S10_config:  unconfig
3476         @mkdir -p $(obj)include
3477         @[ -z "$(findstring _safe_32,$@)" ] || \
3478                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3479                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3480                 }
3481         @[ -z "$(findstring _standard_32,$@)" ] || \
3482                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3483                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3484                 }
3485         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3486                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3487                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3488                 }
3489         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3490                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3491                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3492                 }
3493         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3494
3495 #########################################################################
3496 ## Nios-II
3497 #########################################################################
3498
3499 EP1C20_config : unconfig
3500         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3501
3502 EP1S10_config : unconfig
3503         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3504
3505 EP1S40_config : unconfig
3506         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3507
3508 PK1C20_config : unconfig
3509         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3510
3511 PCI5441_config : unconfig
3512         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3513
3514 #========================================================================
3515 ## Microblaze
3516 #========================================================================
3517
3518 microblaze-generic_config:      unconfig
3519         @mkdir -p $(obj)include
3520         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3521
3522 #========================================================================
3523 # Blackfin
3524 #========================================================================
3525
3526 # Analog Devices boards
3527 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3528         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3529
3530 # Bluetechnix tinyboards
3531 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \
3532         tcm-bf518 tcm-bf537
3533
3534 # Misc third party boards
3535 BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp
3536
3537 # I-SYST Micromodule
3538 BFIN_BOARDS += ibf-dsp561
3539
3540 $(BFIN_BOARDS:%=%_config)       : unconfig
3541         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3542
3543 bf527-ezkit-v2_config   : unconfig
3544         @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
3545                 bf527-ezkit blackfin blackfin bf527-ezkit
3546
3547 #========================================================================
3548 # AVR32
3549 #========================================================================
3550
3551 atngw100_config :       unconfig
3552         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3553
3554 atstk1002_config        :       unconfig
3555         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3556
3557 atstk1003_config        :       unconfig
3558         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3559
3560 atstk1004_config        :       unconfig
3561         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3562
3563 atstk1006_config        :       unconfig
3564         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3565
3566 favr-32-ezkit_config    :       unconfig
3567         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3568
3569 hammerhead_config       :       unconfig
3570         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3571
3572 mimc200_config          :       unconfig
3573         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3574
3575 #========================================================================
3576 # SH3 (SuperH)
3577 #========================================================================
3578
3579 #########################################################################
3580 ## sh2 (Renesas SuperH)
3581 #########################################################################
3582 rsk7203_config: unconfig
3583         @mkdir -p $(obj)include
3584         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3585         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3586
3587 #########################################################################
3588 ## sh3 (Renesas SuperH)
3589 #########################################################################
3590
3591 mpr2_config: unconfig
3592         @mkdir -p $(obj)include
3593         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3594         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3595
3596 ms7720se_config: unconfig
3597         @mkdir -p $(obj)include
3598         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3599         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3600
3601 #########################################################################
3602 ## sh4 (Renesas SuperH)
3603 #########################################################################
3604
3605 MigoR_config :       unconfig
3606         @mkdir -p $(obj)include
3607         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3608         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3609
3610 ms7750se_config: unconfig
3611         @mkdir -p $(obj)include
3612         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3613         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3614
3615 ms7722se_config :       unconfig
3616         @mkdir -p $(obj)include
3617         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3618         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3619
3620 r2dplus_config  :   unconfig
3621         @mkdir -p $(obj)include
3622         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3623         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3624
3625 r7780mp_config: unconfig
3626         @mkdir -p $(obj)include
3627         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3628         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3629
3630 sh7763rdp_config  :   unconfig
3631         @mkdir -p $(obj)include
3632         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3633         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3634
3635 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3636 sh7785lcr_32bit_config \
3637 sh7785lcr_config  :   unconfig
3638         @mkdir -p $(obj)include
3639         @mkdir -p $(obj)board/renesas/sh7785lcr
3640         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3641         @if [ "$(findstring 32bit, $@)" ] ; then \
3642                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3643                 echo "TEXT_BASE = 0x8ff80000" > \
3644                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3645                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3646         fi
3647         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3648
3649 ap325rxa_config  :   unconfig
3650         @mkdir -p $(obj)include
3651         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3652         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3653
3654 espt_config  :   unconfig
3655         @mkdir -p $(obj)include
3656         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3657         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3658
3659 #========================================================================
3660 # SPARC
3661 #========================================================================
3662
3663 #########################################################################
3664 ## LEON3
3665 #########################################################################
3666
3667 # Gaisler GR-XC3S-1500 board
3668 gr_xc3s_1500_config : unconfig
3669         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3670
3671 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3672 gr_cpci_ax2000_config : unconfig
3673         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3674
3675 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3676 # Development board Stratix II edition, FPGA Device EP2S60.
3677 gr_ep2s60_config: unconfig
3678         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3679
3680 # Gaisler LEON3 GRSIM simulator
3681 grsim_config : unconfig
3682         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3683
3684 #########################################################################
3685 ## LEON2
3686 #########################################################################
3687
3688 # Gaisler LEON2 GRSIM simulator
3689 grsim_leon2_config : unconfig
3690         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3691
3692 #########################################################################
3693 #########################################################################
3694 #########################################################################
3695
3696 clean:
3697         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3698                $(obj)examples/standalone/atmel_df_pow2                    \
3699                $(obj)examples/standalone/eepro100_eeprom                  \
3700                $(obj)examples/standalone/hello_world                      \
3701                $(obj)examples/standalone/interrupt                        \
3702                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3703                $(obj)examples/standalone/sched                            \
3704                $(obj)examples/standalone/smc91111_eeprom                  \
3705                $(obj)examples/standalone/test_burst                       \
3706                $(obj)examples/standalone/timer
3707         @rm -f $(obj)examples/api/demo{,.bin}
3708         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3709                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3710                $(obj)tools/envcrc                                         \
3711                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3712                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3713                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3714                $(obj)tools/ncb             $(obj)tools/ubsha1
3715         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3716                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3717                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3718                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3719                $(obj)lib_blackfin/u-boot.lds                              \
3720                $(obj)u-boot.lds                                           \
3721                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3722         @rm -f $(obj)include/bmp_logo.h
3723         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3724         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3725         @rm -f $(ONENAND_BIN)
3726         @rm -f $(obj)onenand_ipl/u-boot.lds
3727         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3728         @find $(OBJTREE) -type f \
3729                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3730                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3731                 | xargs rm -f
3732
3733 clobber:        clean
3734         @find $(OBJTREE) -type f \( -name .depend \
3735                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3736                 -print0 \
3737                 | xargs -0 rm -f
3738         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3739                 $(obj)cscope.* $(obj)*.*~
3740         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3741         @rm -f $(obj)u-boot.kwb
3742         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3743         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3744         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3745         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3746         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3747
3748 ifeq ($(OBJTREE),$(SRCTREE))
3749 mrproper \
3750 distclean:      clobber unconfig
3751 else
3752 mrproper \
3753 distclean:      clobber unconfig
3754         rm -rf $(obj)*
3755 endif
3756
3757 backup:
3758         F=`basename $(TOPDIR)` ; cd .. ; \
3759         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3760
3761 #########################################################################