Makefile

   1 VERSION = 2015
   2 PATCHLEVEL = 10
   3 SUBLEVEL =
   4 EXTRAVERSION =
   5 NAME =
   6
   7 # *DOCUMENTATION*
   8 # To see a list of typical targets execute "make help"
   9 # More info can be located in ./README
  10 # Comments in this file are targeted only to the developer, do not
  11 # expect to learn how to build the kernel reading this file.
  12
  13 # o Do not use make's built-in rules and variables
  14 #   (this increases performance and avoids hard-to-debug behaviour);
  15 # o Look for make include files relative to root of kernel src
  16 MAKEFLAGS += -rR --include-dir=$(CURDIR)
  17
  18 # Avoid funny character set dependencies
  19 unexport LC_ALL
  20 LC_COLLATE=C
  21 LC_NUMERIC=C
  22 export LC_COLLATE LC_NUMERIC
  23
  24 # Avoid interference with shell env settings
  25 unexport GREP_OPTIONS
  26
  27 # We are using a recursive build, so we need to do a little thinking
  28 # to get the ordering right.
  29 #
  30 # Most importantly: sub-Makefiles should only ever modify files in
  31 # their own directory. If in some directory we have a dependency on
  32 # a file in another dir (which doesn't happen often, but it's often
  33 # unavoidable when linking the built-in.o targets which finally
  34 # turn into vmlinux), we will call a sub make in that other dir, and
  35 # after that we are sure that everything which is in that other dir
  36 # is now up to date.
  37 #
  38 # The only cases where we need to modify files which have global
  39 # effects are thus separated out and done before the recursive
  40 # descending is started. They are now explicitly listed as the
  41 # prepare rule.
  42
  43 # Beautify output
  44 # ---------------------------------------------------------------------------
  45 #
  46 # Normally, we echo the whole command before executing it. By making
  47 # that echo $($(quiet)$(cmd)), we now have the possibility to set
  48 # $(quiet) to choose other forms of output instead, e.g.
  49 #
  50 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  51 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
  52 #
  53 # If $(quiet) is empty, the whole command will be printed.
  54 # If it is set to "quiet_", only the short version will be printed.
  55 # If it is set to "silent_", nothing will be printed at all, since
  56 # the variable $(silent_cmd_cc_o_c) doesn't exist.
  57 #
  58 # A simple variant is to prefix commands with $(Q) - that's useful
  59 # for commands that shall be hidden in non-verbose mode.
  60 #
  61 #       $(Q)ln $@ :<
  62 #
  63 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  64 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  65 #
  66 # To put more focus on warnings, be less verbose as default
  67 # Use 'make V=1' to see the full commands
  68
  69 ifeq ("$(origin V)", "command line")
  70   KBUILD_VERBOSE = $(V)
  71 endif
  72 ifndef KBUILD_VERBOSE
  73   KBUILD_VERBOSE = 0
  74 endif
  75
  76 ifeq ($(KBUILD_VERBOSE),1)
  77   quiet =
  78   Q =
  79 else
  80   quiet=quiet_
  81   Q = @
  82 endif
  83
  84 # If the user is running make -s (silent mode), suppress echoing of
  85 # commands
  86
  87 ifneq ($(filter 4.%,$(MAKE_VERSION)),)  # make-4
  88 ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  89   quiet=silent_
  90 endif
  91 else                                    # make-3.8x
  92 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  93   quiet=silent_
  94 endif
  95 endif
  96
  97 export quiet Q KBUILD_VERBOSE
  98
  99 # kbuild supports saving output files in a separate directory.
 100 # To locate output files in a separate directory two syntaxes are supported.
 101 # In both cases the working directory must be the root of the kernel src.
 102 # 1) O=
 103 # Use "make O=dir/to/store/output/files/"
 104 #
 105 # 2) Set KBUILD_OUTPUT
 106 # Set the environment variable KBUILD_OUTPUT to point to the directory
 107 # where the output files shall be placed.
 108 # export KBUILD_OUTPUT=dir/to/store/output/files/
 109 # make
 110 #
 111 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
 112 # variable.
 113
 114 # KBUILD_SRC is set on invocation of make in OBJ directory
 115 # KBUILD_SRC is not intended to be used by the regular user (for now)
 116 ifeq ($(KBUILD_SRC),)
 117
 118 # OK, Make called in directory where kernel src resides
 119 # Do we want to locate output files in a separate directory?
 120 ifeq ("$(origin O)", "command line")
 121   KBUILD_OUTPUT := $(O)
 122 endif
 123
 124 # That's our default target when none is given on the command line
 125 PHONY := _all
 126 _all:
 127
 128 # Cancel implicit rules on top Makefile
 129 $(CURDIR)/Makefile Makefile: ;
 130
 131 ifneq ($(KBUILD_OUTPUT),)
 132 # Invoke a second make in the output directory, passing relevant variables
 133 # check that the output directory actually exists
 134 saved-output := $(KBUILD_OUTPUT)
 135 KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
 136                                                                 && /bin/pwd)
 137 $(if $(KBUILD_OUTPUT),, \
 138      $(error failed to create output directory "$(saved-output)"))
 139
 140 PHONY += $(MAKECMDGOALS) sub-make
 141
 142 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 143         @:
 144
 145 sub-make: FORCE
 146         $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
 147         -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
 148
 149 # Leave processing to above invocation of make
 150 skip-makefile := 1
 151 endif # ifneq ($(KBUILD_OUTPUT),)
 152 endif # ifeq ($(KBUILD_SRC),)
 153
 154 # We process the rest of the Makefile if this is the final invocation of make
 155 ifeq ($(skip-makefile),)
 156
 157 # Do not print "Entering directory ...",
 158 # but we want to display it when entering to the output directory
 159 # so that IDEs/editors are able to understand relative filenames.
 160 MAKEFLAGS += --no-print-directory
 161
 162 # Call a source code checker (by default, "sparse") as part of the
 163 # C compilation.
 164 #
 165 # Use 'make C=1' to enable checking of only re-compiled files.
 166 # Use 'make C=2' to enable checking of *all* source files, regardless
 167 # of whether they are re-compiled or not.
 168 #
 169 # See the file "Documentation/sparse.txt" for more details, including
 170 # where to get the "sparse" utility.
 171
 172 ifeq ("$(origin C)", "command line")
 173   KBUILD_CHECKSRC = $(C)
 174 endif
 175 ifndef KBUILD_CHECKSRC
 176   KBUILD_CHECKSRC = 0
 177 endif
 178
 179 # Use make M=dir to specify directory of external module to build
 180 # Old syntax make ... SUBDIRS=$PWD is still supported
 181 # Setting the environment variable KBUILD_EXTMOD take precedence
 182 ifdef SUBDIRS
 183   KBUILD_EXTMOD ?= $(SUBDIRS)
 184 endif
 185
 186 ifeq ("$(origin M)", "command line")
 187   KBUILD_EXTMOD := $(M)
 188 endif
 189
 190 # If building an external module we do not care about the all: rule
 191 # but instead _all depend on modules
 192 PHONY += all
 193 ifeq ($(KBUILD_EXTMOD),)
 194 _all: all
 195 else
 196 _all: modules
 197 endif
 198
 199 ifeq ($(KBUILD_SRC),)
 200         # building in the source tree
 201         srctree := .
 202 else
 203         ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
 204                 # building in a subdirectory of the source tree
 205                 srctree := ..
 206         else
 207                 srctree := $(KBUILD_SRC)
 208         endif
 209 endif
 210 objtree         := .
 211 src             := $(srctree)
 212 obj             := $(objtree)
 213
 214 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 215
 216 export srctree objtree VPATH
 217
 218 # Make sure CDPATH settings don't interfere
 219 unexport CDPATH
 220
 221 #########################################################################
 222
 223 HOSTARCH := $(shell uname -m | \
 224         sed -e s/i.86/x86/ \
 225             -e s/sun4u/sparc64/ \
 226             -e s/arm.*/arm/ \
 227             -e s/sa110/arm/ \
 228             -e s/ppc64/powerpc/ \
 229             -e s/ppc/powerpc/ \
 230             -e s/macppc/powerpc/\
 231             -e s/sh.*/sh/)
 232
 233 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 234             sed -e 's/\(cygwin\).*/cygwin/')
 235
 236 export  HOSTARCH HOSTOS
 237
 238 #########################################################################
 239
 240 # set default to nothing for native builds
 241 ifeq ($(HOSTARCH),$(ARCH))
 242 CROSS_COMPILE ?=
 243 endif
 244
 245 KCONFIG_CONFIG  ?= .config
 246 export KCONFIG_CONFIG
 247
 248 # SHELL used by kbuild
 249 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 250           else if [ -x /bin/bash ]; then echo /bin/bash; \
 251           else echo sh; fi ; fi)
 252
 253 HOSTCC       = cc
 254 HOSTCXX      = c++
 255 HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
 256 HOSTCXXFLAGS = -O2
 257
 258 ifeq ($(HOSTOS),cygwin)
 259 HOSTCFLAGS      += -ansi
 260 endif
 261
 262 # Mac OS X / Darwin's C preprocessor is Apple specific.  It
 263 # generates numerous errors and warnings.  We want to bypass it
 264 # and use GNU C's cpp.  To do this we pass the -traditional-cpp
 265 # option to the compiler.  Note that the -traditional-cpp flag
 266 # DOES NOT have the same semantics as GNU C's flag, all it does
 267 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
 268 #
 269 # Apple's linker is similar, thanks to the new 2 stage linking
 270 # multiple symbol definitions are treated as errors, hence the
 271 # -multiply_defined suppress option to turn off this error.
 272 #
 273 ifeq ($(HOSTOS),darwin)
 274 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
 275 DARWIN_MAJOR_VERSION    = $(shell sw_vers -productVersion | cut -f 1 -d '.')
 276 DARWIN_MINOR_VERSION    = $(shell sw_vers -productVersion | cut -f 2 -d '.')
 277
 278 os_x_before     = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
 279         $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
 280
 281 # Snow Leopards build environment has no longer restrictions as described above
 282 HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
 283 HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
 284 HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
 285
 286 # since Lion (10.7) ASLR is on by default, but we use linker generated lists
 287 # in some host tools which is a problem then ... so disable ASLR for these
 288 # tools
 289 HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
 290 endif
 291
 292 # Decide whether to build built-in, modular, or both.
 293 # Normally, just do built-in.
 294
 295 KBUILD_MODULES :=
 296 KBUILD_BUILTIN := 1
 297
 298 # If we have only "make modules", don't compile built-in objects.
 299 # When we're building modules with modversions, we need to consider
 300 # the built-in objects during the descend as well, in order to
 301 # make sure the checksums are up to date before we record them.
 302
 303 ifeq ($(MAKECMDGOALS),modules)
 304   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 305 endif
 306
 307 # If we have "make <whatever> modules", compile modules
 308 # in addition to whatever we do anyway.
 309 # Just "make" or "make all" shall build modules as well
 310
 311 # U-Boot does not need modules
 312 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 313 #  KBUILD_MODULES := 1
 314 #endif
 315
 316 #ifeq ($(MAKECMDGOALS),)
 317 #  KBUILD_MODULES := 1
 318 #endif
 319
 320 export KBUILD_MODULES KBUILD_BUILTIN
 321 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 322
 323 # We need some generic definitions (do not try to remake the file).
 324 scripts/Kbuild.include: ;
 325 include scripts/Kbuild.include
 326
 327 # Make variables (CC, etc...)
 328
 329 AS              = $(CROSS_COMPILE)as
 330 # Always use GNU ld
 331 ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
 332 LD              = $(CROSS_COMPILE)ld.bfd
 333 else
 334 LD              = $(CROSS_COMPILE)ld
 335 endif
 336 CC              = $(CROSS_COMPILE)gcc
 337 CPP             = $(CC) -E
 338 AR              = $(CROSS_COMPILE)ar
 339 NM              = $(CROSS_COMPILE)nm
 340 LDR             = $(CROSS_COMPILE)ldr
 341 STRIP           = $(CROSS_COMPILE)strip
 342 OBJCOPY         = $(CROSS_COMPILE)objcopy
 343 OBJDUMP         = $(CROSS_COMPILE)objdump
 344 AWK             = awk
 345 PERL            = perl
 346 PYTHON          = python
 347 DTC             = dtc
 348 CHECK           = sparse
 349
 350 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 351                   -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
 352
 353 KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
 354
 355 KBUILD_CFLAGS   := -Wall -Wstrict-prototypes \
 356                    -Wno-format-security \
 357                    -fno-builtin -ffreestanding
 358 KBUILD_AFLAGS   := -D__ASSEMBLY__
 359
 360 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
 361 UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
 362 UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 363
 364 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
 365 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
 366 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
 367 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
 368 export MAKE AWK PERL PYTHON
 369 export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
 370
 371 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
 372 export KBUILD_CFLAGS KBUILD_AFLAGS
 373
 374 # When compiling out-of-tree modules, put MODVERDIR in the module
 375 # tree rather than in the kernel tree. The kernel tree might
 376 # even be read-only.
 377 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 378
 379 # Files to ignore in find ... statements
 380
 381 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 382                           -name CVS -o -name .pc -o -name .hg -o -name .git \) \
 383                           -prune -o
 384 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 385                          --exclude CVS --exclude .pc --exclude .hg --exclude .git
 386
 387 # ===========================================================================
 388 # Rules shared between *config targets and build targets
 389
 390 # Basic helpers built in scripts/
 391 PHONY += scripts_basic
 392 scripts_basic:
 393         $(Q)$(MAKE) $(build)=scripts/basic
 394         $(Q)rm -f .tmp_quiet_recordmcount
 395
 396 # To avoid any implicit rule to kick in, define an empty command.
 397 scripts/basic/%: scripts_basic ;
 398
 399 PHONY += outputmakefile
 400 # outputmakefile generates a Makefile in the output directory, if using a
 401 # separate output directory. This allows convenient use of make in the
 402 # output directory.
 403 outputmakefile:
 404 ifneq ($(KBUILD_SRC),)
 405         $(Q)ln -fsn $(srctree) source
 406         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 407             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 408 endif
 409
 410 # To make sure we do not include .config for any of the *config targets
 411 # catch them early, and hand them over to scripts/kconfig/Makefile
 412 # It is allowed to specify more targets when calling make, including
 413 # mixing *config targets and build targets.
 414 # For example 'make oldconfig all'.
 415 # Detect when mixed targets is specified, and make a second invocation
 416 # of make so .config is not included in this case either (for *config).
 417
 418 version_h := include/generated/version_autogenerated.h
 419 timestamp_h := include/generated/timestamp_autogenerated.h
 420
 421 no-dot-config-targets := clean clobber mrproper distclean \
 422                          help %docs check% coccicheck \
 423                          ubootversion backup
 424
 425 config-targets := 0
 426 mixed-targets  := 0
 427 dot-config     := 1
 428
 429 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 430         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 431                 dot-config := 0
 432         endif
 433 endif
 434
 435 ifeq ($(KBUILD_EXTMOD),)
 436         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 437                 config-targets := 1
 438                 ifneq ($(words $(MAKECMDGOALS)),1)
 439                         mixed-targets := 1
 440                 endif
 441         endif
 442 endif
 443
 444 ifeq ($(mixed-targets),1)
 445 # ===========================================================================
 446 # We're called with mixed targets (*config and build targets).
 447 # Handle them one by one.
 448
 449 PHONY += $(MAKECMDGOALS) __build_one_by_one
 450
 451 $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
 452         @:
 453
 454 __build_one_by_one:
 455         $(Q)set -e; \
 456         for i in $(MAKECMDGOALS); do \
 457                 $(MAKE) -f $(srctree)/Makefile $$i; \
 458         done
 459
 460 else
 461 ifeq ($(config-targets),1)
 462 # ===========================================================================
 463 # *config targets only - make sure prerequisites are updated, and descend
 464 # in scripts/kconfig to make the *config target
 465
 466 KBUILD_DEFCONFIG := sandbox_defconfig
 467 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 468
 469 config: scripts_basic outputmakefile FORCE
 470         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 471
 472 %config: scripts_basic outputmakefile FORCE
 473         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 474
 475 else
 476 # ===========================================================================
 477 # Build targets only - this includes vmlinux, arch specific targets, clean
 478 # targets and others. In general all targets except *config targets.
 479
 480 ifeq ($(dot-config),1)
 481 # Read in config
 482 -include include/config/auto.conf
 483
 484 # Read in dependencies to all Kconfig* files, make sure to run
 485 # oldconfig if changes are detected.
 486 -include include/config/auto.conf.cmd
 487
 488 # To avoid any implicit rule to kick in, define an empty command
 489 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 490
 491 # If .config is newer than include/config/auto.conf, someone tinkered
 492 # with it and forgot to run make oldconfig.
 493 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 494 # we execute the config step to be sure to catch updated Kconfig files
 495 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 496         $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 497         @# If the following part fails, include/config/auto.conf should be
 498         @# deleted so "make silentoldconfig" will be re-run on the next build.
 499         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
 500                 { rm -f include/config/auto.conf; false; }
 501         @# include/config.h has been updated after "make silentoldconfig".
 502         @# We need to touch include/config/auto.conf so it gets newer
 503         @# than include/config.h.
 504         @# Otherwise, 'make silentoldconfig' would be invoked twice.
 505         $(Q)touch include/config/auto.conf
 506
 507 -include include/autoconf.mk
 508 -include include/autoconf.mk.dep
 509
 510 # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
 511 # is up-to-date. When we switch to a different board configuration, old CONFIG
 512 # macros are still remaining in include/config/auto.conf. Without the following
 513 # gimmick, wrong config.mk would be included leading nasty warnings/errors.
 514 ifneq ($(wildcard $(KCONFIG_CONFIG)),)
 515 ifneq ($(wildcard include/config/auto.conf),)
 516 autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
 517                                                 include/config/auto.conf)
 518 ifeq ($(autoconf_is_old),)
 519 include config.mk
 520 include arch/$(ARCH)/Makefile
 521 endif
 522 endif
 523 endif
 524
 525 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
 526 # that (or fail if absent).  Otherwise, search for a linker script in a
 527 # standard location.
 528
 529 ifndef LDSCRIPT
 530         #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
 531         ifdef CONFIG_SYS_LDSCRIPT
 532                 # need to strip off double quotes
 533                 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
 534         endif
 535 endif
 536
 537 # If there is no specified link script, we look in a number of places for it
 538 ifndef LDSCRIPT
 539         ifeq ($(wildcard $(LDSCRIPT)),)
 540                 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
 541         endif
 542         ifeq ($(wildcard $(LDSCRIPT)),)
 543                 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
 544         endif
 545         ifeq ($(wildcard $(LDSCRIPT)),)
 546                 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
 547         endif
 548 endif
 549
 550 else
 551 # Dummy target needed, because used as prerequisite
 552 include/config/auto.conf: ;
 553 endif # $(dot-config)
 554
 555 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 556 KBUILD_CFLAGS   += -Os
 557 else
 558 KBUILD_CFLAGS   += -O2
 559 endif
 560
 561 ifdef BUILD_TAG
 562 KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
 563 endif
 564
 565 KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
 566 KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
 567
 568 KBUILD_CFLAGS   += -g
 569 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
 570 # option to the assembler.
 571 KBUILD_AFLAGS   += -g
 572
 573 # Report stack usage if supported
 574 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
 575         KBUILD_CFLAGS += -fstack-usage
 576 endif
 577
 578 KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
 579
 580 # turn jbsr into jsr for m68k
 581 ifeq ($(ARCH),m68k)
 582 ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
 583 KBUILD_AFLAGS += -Wa,-gstabs,-S
 584 endif
 585 endif
 586
 587 # Prohibit date/time macros, which would make the build non-deterministic
 588 KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
 589
 590 ifneq ($(CONFIG_SYS_TEXT_BASE),)
 591 KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
 592 endif
 593
 594 export CONFIG_SYS_TEXT_BASE
 595
 596 include scripts/Makefile.extrawarn
 597
 598 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 599 KBUILD_CPPFLAGS += $(KCPPFLAGS)
 600 KBUILD_AFLAGS += $(KAFLAGS)
 601 KBUILD_CFLAGS += $(KCFLAGS)
 602
 603 # Use UBOOTINCLUDE when you must reference the include/ directory.
 604 # Needed to be compatible with the O= option
 605 UBOOTINCLUDE    := \
 606                 -Iinclude \
 607                 $(if $(KBUILD_SRC), -I$(srctree)/include) \
 608                 -I$(srctree)/arch/$(ARCH)/include \
 609                 -include $(srctree)/include/linux/kconfig.h
 610
 611 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 612 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 613
 614 # FIX ME
 615 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
 616                                                         $(NOSTDINC_FLAGS)
 617 c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
 618
 619 #########################################################################
 620 # U-Boot objects....order is important (i.e. start must be first)
 621
 622 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
 623
 624 libs-y += lib/
 625 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 626 libs-$(CONFIG_OF_EMBED) += dts/
 627 libs-y += fs/
 628 libs-y += net/
 629 libs-y += disk/
 630 libs-y += drivers/
 631 libs-y += drivers/dma/
 632 libs-y += drivers/gpio/
 633 libs-y += drivers/i2c/
 634 libs-y += drivers/mmc/
 635 libs-y += drivers/mtd/
 636 libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
 637 libs-y += drivers/mtd/onenand/
 638 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 639 libs-y += drivers/mtd/spi/
 640 libs-y += drivers/net/
 641 libs-y += drivers/net/phy/
 642 libs-y += drivers/pci/
 643 libs-y += drivers/power/ \
 644         drivers/power/fuel_gauge/ \
 645         drivers/power/mfd/ \
 646         drivers/power/pmic/ \
 647         drivers/power/battery/ \
 648         drivers/power/regulator/
 649 libs-y += drivers/spi/
 650 libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
 651 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 652 libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
 653 libs-y += drivers/serial/
 654 libs-y += drivers/usb/dwc3/
 655 libs-y += drivers/usb/emul/
 656 libs-y += drivers/usb/eth/
 657 libs-y += drivers/usb/gadget/
 658 libs-y += drivers/usb/gadget/udc/
 659 libs-y += drivers/usb/host/
 660 libs-y += drivers/usb/musb/
 661 libs-y += drivers/usb/musb-new/
 662 libs-y += drivers/usb/phy/
 663 libs-y += drivers/usb/ulpi/
 664 libs-y += common/
 665 libs-$(CONFIG_API) += api/
 666 libs-$(CONFIG_HAS_POST) += post/
 667 libs-y += test/
 668 libs-y += test/dm/
 669 libs-$(CONFIG_UT_ENV) += test/env/
 670
 671 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
 672
 673 libs-y := $(sort $(libs-y))
 674
 675 u-boot-dirs     := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
 676
 677 u-boot-alldirs  := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
 678
 679 libs-y          := $(patsubst %/, %/built-in.o, $(libs-y))
 680
 681 u-boot-init := $(head-y)
 682 u-boot-main := $(libs-y)
 683
 684
 685 # Add GCC lib
 686 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
 687 PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
 688 else
 689 PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
 690 endif
 691 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 692 export PLATFORM_LIBS
 693 export PLATFORM_LIBGCC
 694
 695 # Special flags for CPP when processing the linker script.
 696 # Pass the version down so we can handle backwards compatibility
 697 # on the fly.
 698 LDPPFLAGS += \
 699         -include $(srctree)/include/u-boot/u-boot.lds.h \
 700         -DCPUDIR=$(CPUDIR) \
 701         $(shell $(LD) --version | \
 702           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 703
 704 #########################################################################
 705 #########################################################################
 706
 707 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 708 BOARD_SIZE_CHECK = \
 709         @actual=`wc -c $@ | awk '{print $$1}'`; \
 710         limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 711         if test $$actual -gt $$limit; then \
 712                 echo "$@ exceeds file size limit:" >&2 ; \
 713                 echo "  limit:  $$limit bytes" >&2 ; \
 714                 echo "  actual: $$actual bytes" >&2 ; \
 715                 echo "  excess: $$((actual - limit)) bytes" >&2; \
 716                 exit 1; \
 717         fi
 718 else
 719 BOARD_SIZE_CHECK =
 720 endif
 721
 722 # Statically apply RELA-style relocations (currently arm64 only)
 723 ifneq ($(CONFIG_STATIC_RELA),)
 724 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
 725 DO_STATIC_RELA = \
 726         start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
 727         end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
 728         tools/relocate-rela $(2) $(3) $$start $$end
 729 else
 730 DO_STATIC_RELA =
 731 endif
 732
 733 # Always append ALL so that arch config.mk's can add custom ones
 734 ALL-y += u-boot.srec u-boot.bin System.map u-boot.cfg binary_size_check
 735
 736 ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
 737 ifeq ($(CONFIG_SPL_FSL_PBL),y)
 738 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
 739 else
 740 ifneq ($(CONFIG_SECURE_BOOT), y)
 741 # For Secure Boot The Image needs to be signed and Header must also
 742 # be included. So The image has to be built explicitly
 743 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
 744 endif
 745 endif
 746 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
 747 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
 748 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
 749 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
 750 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
 751 ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
 752 endif
 753 ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
 754 ifneq ($(CONFIG_SPL_TARGET),)
 755 ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 756 endif
 757 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
 758 ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
 759 ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
 760
 761 ifneq ($(BUILD_ROM),)
 762 ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
 763 endif
 764
 765 # enable combined SPL/u-boot/dtb rules for tegra
 766 ifneq ($(CONFIG_TEGRA),)
 767 ifeq ($(CONFIG_SPL),y)
 768 ifeq ($(CONFIG_OF_SEPARATE),y)
 769 ALL-y += u-boot-dtb-tegra.bin
 770 else
 771 ALL-y += u-boot-nodtb-tegra.bin
 772 endif
 773 endif
 774 endif
 775
 776 # Add optional build target if defined in board/cpu/soc headers
 777 ifneq ($(CONFIG_BUILD_TARGET),)
 778 ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
 779 endif
 780
 781 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
 782 ifneq ($(CONFIG_SYS_TEXT_BASE),)
 783 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
 784 endif
 785
 786 # Normally we fill empty space with 0xff
 787 quiet_cmd_objcopy = OBJCOPY $@
 788 cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
 789         $(OBJCOPYFLAGS_$(@F)) $< $@
 790
 791 # Provide a version which does not do this, for use by EFI
 792 quiet_cmd_zobjcopy = OBJCOPY $@
 793 cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 794
 795 quiet_cmd_efipayload = OBJCOPY $@
 796 cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
 797
 798 quiet_cmd_mkimage = MKIMAGE $@
 799 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 800         $(if $(KBUILD_VERBOSE:1=), >/dev/null)
 801
 802 quiet_cmd_cat = CAT     $@
 803 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 804
 805 append = cat $(filter-out $< $(PHONY), $^) >> $@
 806
 807 quiet_cmd_pad_cat = CAT     $@
 808 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 809
 810 all:            $(ALL-y)
 811 ifneq ($(CONFIG_SYS_GENERIC_BOARD),y)
 812         @echo "===================== WARNING ======================"
 813         @echo "Please convert this board to generic board."
 814         @echo "Otherwise it will be removed by the end of 2014."
 815         @echo "See doc/README.generic-board for further information"
 816         @echo "===================================================="
 817 endif
 818 ifeq ($(CONFIG_DM_I2C_COMPAT),y)
 819         @echo "===================== WARNING ======================"
 820         @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
 821         @echo "(possibly in a subsequent patch in your series)"
 822         @echo "before sending patches to the mailing list."
 823         @echo "===================================================="
 824 endif
 825
 826 PHONY += dtbs
 827 dtbs dts/dt.dtb: checkdtc u-boot
 828         $(Q)$(MAKE) $(build)=dts dtbs
 829
 830 u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
 831         $(call if_changed,cat)
 832
 833 %.imx: %.bin
 834         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 835
 836 quiet_cmd_copy = COPY    $@
 837       cmd_copy = cp $< $@
 838
 839 u-boot.dtb: dts/dt.dtb
 840         $(call cmd,copy)
 841
 842 OBJCOPYFLAGS_u-boot.hex := -O ihex
 843
 844 OBJCOPYFLAGS_u-boot.srec := -O srec
 845
 846 u-boot.hex u-boot.srec: u-boot FORCE
 847         $(call if_changed,objcopy)
 848
 849 OBJCOPYFLAGS_u-boot.bin := -O binary \
 850                 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
 851
 852 binary_size_check: u-boot.bin FORCE
 853         @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \
 854         map_size=$(shell cat u-boot.map | \
 855                 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
 856                 | sed 's/0X//g' \
 857                 | bc); \
 858         if [ "" != "$$map_size" ]; then \
 859                 if test $$map_size -ne $$file_size; then \
 860                         echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
 861                         echo "  but u-boot.bin shows $$file_size" >&2 ; \
 862                         exit 1; \
 863                 fi \
 864         fi
 865
 866 u-boot.bin: u-boot FORCE
 867         $(call if_changed,objcopy)
 868         $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
 869         $(BOARD_SIZE_CHECK)
 870
 871 u-boot.ldr:     u-boot
 872                 $(CREATE_LDR_ENV)
 873                 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
 874                 $(BOARD_SIZE_CHECK)
 875
 876 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
 877
 878 OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 879
 880 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
 881         $(call if_changed,objcopy)
 882
 883 #
 884 # U-Boot entry point, needed for booting of full-blown U-Boot
 885 # from the SPL U-Boot version.
 886 #
 887 ifndef CONFIG_SYS_UBOOT_START
 888 CONFIG_SYS_UBOOT_START := 0
 889 endif
 890
 891 # Create a file containing the configuration options the image was built with
 892 quiet_cmd_cpp_cfg = CFG     $@
 893 cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
 894         -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
 895
 896 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
 897         -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 898         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 899
 900 MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
 901         -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 902
 903 MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
 904         -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 905
 906 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 907                 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 908
 909 u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
 910         $(call if_changed,mkimage)
 911
 912 # If the kwboot xmodem protocol is used, to boot U-Boot on the MVEBU
 913 # SoC's, the SPL U-Boot returns to the BootROM after it completes
 914 # the SDRAM setup. The BootROM expects no U-Boot header in the main
 915 # U-Boot image. So we need to combine SPL and u-boot.bin instead of
 916 # u-boot.img in this case.
 917 ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT
 918 u-boot-spl.kwb: u-boot-dtb.bin spl/u-boot-spl.bin FORCE
 919         $(call if_changed,mkimage)
 920 else
 921 u-boot-spl.kwb: u-boot-dtb.img spl/u-boot-spl.bin FORCE
 922         $(call if_changed,mkimage)
 923 endif
 924
 925 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
 926
 927 u-boot-dtb.img: u-boot-dtb.bin FORCE
 928         $(call if_changed,mkimage)
 929
 930 u-boot.sha1:    u-boot.bin
 931                 tools/ubsha1 u-boot.bin
 932
 933 u-boot.dis:     u-boot
 934                 $(OBJDUMP) -d $< > $@
 935
 936 u-boot.cfg:     include/config.h
 937         $(call if_changed,cpp_cfg)
 938
 939 ifdef CONFIG_TPL
 940 SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
 941 else
 942 SPL_PAYLOAD := u-boot.bin
 943 endif
 944
 945 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 946                                    --pad-to=$(CONFIG_SPL_PAD_TO)
 947 u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
 948         $(call if_changed,pad_cat)
 949
 950 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
 951
 952 lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
 953         $(call if_changed,mkimage)
 954
 955 OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
 956
 957 lpc32xx-boot-0.bin: lpc32xx-spl.img
 958         $(call if_changed,objcopy)
 959
 960 OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
 961
 962 lpc32xx-boot-1.bin: lpc32xx-spl.img
 963         $(call if_changed,objcopy)
 964
 965 lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img
 966         $(call if_changed,cat)
 967
 968 CLEAN_FILES += lpc32xx-*
 969
 970 OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
 971                                    --pad-to=$(CONFIG_TPL_PAD_TO)
 972 tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
 973         $(call if_changed,pad_cat)
 974
 975 SPL: spl/u-boot-spl.bin FORCE
 976         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 977
 978 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
 979         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 980
 981 MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
 982
 983 u-boot.ubl: u-boot-with-spl.bin FORCE
 984         $(call if_changed,mkimage)
 985
 986 MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
 987         $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
 988         -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
 989 spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
 990         $(call if_changed,mkimage)
 991
 992 OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
 993 u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
 994         $(call if_changed,pad_cat)
 995
 996 u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
 997         $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
 998 u-boot.sb: u-boot.bin spl/u-boot-spl.bin
 999         $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
1000
1001 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
1002 # Both images are created using mkimage (crc etc), so that the ROM
1003 # bootloader can check its integrity. Padding needs to be done to the
1004 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
1005 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
1006 # The resulting image containing both U-Boot images is called u-boot.spr
1007 MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1008         -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1009 spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1010         $(call if_changed,mkimage)
1011
1012 OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1013                           --gap-fill=0xff
1014 u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1015         $(call if_changed,pad_cat)
1016
1017 ifneq ($(CONFIG_ARCH_SOCFPGA),)
1018 quiet_cmd_socboot = SOCBOOT $@
1019 cmd_socboot = cat       spl/u-boot-spl-dtb.sfp spl/u-boot-spl-dtb.sfp   \
1020                         spl/u-boot-spl-dtb.sfp spl/u-boot-spl-dtb.sfp   \
1021                         u-boot-dtb.img > $@ || rm -f $@
1022 u-boot-with-spl-dtb.sfp: spl/u-boot-spl-dtb.sfp u-boot-dtb.img FORCE
1023         $(call if_changed,socboot)
1024 endif
1025
1026 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1027 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1028 # the middle.
1029 ifneq ($(CONFIG_X86_RESET_VECTOR),)
1030 rom: u-boot.rom FORCE
1031
1032 IFDTOOL=$(objtree)/tools/ifdtool
1033 IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
1034 IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
1035 IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
1036 IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
1037 IFDTOOL_FLAGS += -C
1038
1039 ifneq ($(CONFIG_HAVE_INTEL_ME),)
1040 IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
1041 IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
1042 endif
1043
1044 ifneq ($(CONFIG_HAVE_MRC),)
1045 IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
1046 endif
1047
1048 ifneq ($(CONFIG_HAVE_FSP),)
1049 IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
1050 endif
1051
1052 ifneq ($(CONFIG_HAVE_CMC),)
1053 IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
1054 endif
1055
1056 ifneq ($(CONFIG_HAVE_VGA_BIOS),)
1057 IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
1058 endif
1059
1060 quiet_cmd_ifdtool = IFDTOOL $@
1061 cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
1062 ifneq ($(CONFIG_HAVE_INTEL_ME),)
1063 cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
1064 endif
1065 cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
1066 cmd_ifdtool += mv u-boot.tmp $@
1067
1068 u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
1069         $(call if_changed,ifdtool)
1070
1071 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1072 u-boot-x86-16bit.bin: u-boot FORCE
1073         $(call if_changed,objcopy)
1074 endif
1075
1076 ifneq ($(CONFIG_SUNXI),)
1077 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
1078                                    --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
1079 u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \
1080                         u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE
1081         $(call if_changed,pad_cat)
1082 endif
1083
1084 ifneq ($(CONFIG_TEGRA),)
1085 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1086 u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
1087         $(call if_changed,pad_cat)
1088
1089 ifeq ($(CONFIG_OF_SEPARATE),y)
1090 u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE
1091         $(call if_changed,cat)
1092 endif
1093 endif
1094
1095 OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1096 u-boot-app.efi: u-boot FORCE
1097         $(call if_changed,zobjcopy)
1098
1099 u-boot-dtb.bin.o: u-boot-dtb.bin FORCE
1100         $(call if_changed,efipayload)
1101
1102 u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1103         $(call if_changed_dep,cpp_lds)
1104
1105 # Rule to link the EFI payload which contains a stub and a U-Boot binary
1106 quiet_cmd_u-boot_payload ?= LD      $@
1107       cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
1108       -T u-boot-payload.lds arch/x86/cpu/call32.o \
1109       lib/efi/efi.o lib/efi/efi_stub.o u-boot-dtb.bin.o \
1110       $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
1111
1112 u-boot-payload: u-boot-dtb.bin.o u-boot-payload.lds FORCE
1113         $(call if_changed,u-boot_payload)
1114
1115 OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1116 u-boot-payload.efi: u-boot-payload FORCE
1117         $(call if_changed,zobjcopy)
1118
1119 u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1120         $(call if_changed,cat)
1121
1122 #Add a target to create boot binary having SPL binary in PBI format
1123 #concatenated with u-boot binary. It is need by PowerPC SoC having
1124 #internal SRAM <= 512KB.
1125 MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1126                 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1127                 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
1128
1129 spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1130         $(call if_changed,mkimage)
1131
1132 ifeq ($(ARCH),arm)
1133 ifdef CONFIG_DM
1134 UBOOT_BINLOAD := u-boot-dtb.img
1135 else
1136 UBOOT_BINLOAD := u-boot.img
1137 endif
1138 else
1139 UBOOT_BINLOAD := u-boot.bin
1140 endif
1141
1142 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1143                           --gap-fill=0xff
1144
1145 u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
1146         $(call if_changed,pad_cat)
1147
1148 # PPC4xx needs the SPL at the end of the image, since the reset vector
1149 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1150 # and need to introduce a new build target with the full blown U-Boot
1151 # at the start padded up to the start of the SPL image. And then concat
1152 # the SPL image to the end.
1153
1154 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1155         --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1156 u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1157         $(call if_changed,pad_cat)
1158
1159 # Create a new ELF from a raw binary file.  This is useful for arm64
1160 # where static relocation needs to be performed on the raw binary,
1161 # but certain simulators only accept an ELF file (but don't do the
1162 # relocation).
1163 # FIXME refactor dts/Makefile to share target/arch detection
1164 u-boot.elf: u-boot.bin
1165         @$(OBJCOPY)  -B aarch64 -I binary -O elf64-littleaarch64 \
1166                 $< u-boot-elf.o
1167         @$(LD) u-boot-elf.o -o $@ \
1168                 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
1169                 -Ttext=$(CONFIG_SYS_TEXT_BASE)
1170
1171 # Rule to link u-boot
1172 # May be overridden by arch/$(ARCH)/config.mk
1173 quiet_cmd_u-boot__ ?= LD      $@
1174       cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1175       -T u-boot.lds $(u-boot-init)                             \
1176       --start-group $(u-boot-main) --end-group                 \
1177       $(PLATFORM_LIBS) -Map u-boot.map
1178
1179 quiet_cmd_smap = GEN     common/system_map.o
1180 cmd_smap = \
1181         smap=`$(call SYSTEM_MAP,u-boot) | \
1182                 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1183         $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1184                 -c $(srctree)/common/system_map.c -o common/system_map.o
1185
1186 u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
1187         $(call if_changed,u-boot__)
1188 ifeq ($(CONFIG_KALLSYMS),y)
1189         $(call cmd,smap)
1190         $(call cmd,u-boot__) common/system_map.o
1191 endif
1192
1193 # The actual objects are generated when descending,
1194 # make sure no implicit rule kicks in
1195 $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
1196
1197 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1198 # Preset locale variables to speed up the build process. Limit locale
1199 # tweaks to this spot to avoid wrong language settings when running
1200 # make menuconfig etc.
1201 # Error messages still appears in the original language
1202
1203 PHONY += $(u-boot-dirs)
1204 $(u-boot-dirs): prepare scripts
1205         $(Q)$(MAKE) $(build)=$@
1206
1207 tools: prepare
1208 # The "tools" are needed early
1209 $(filter-out tools, $(u-boot-dirs)): tools
1210 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1211 # is "yes"), so compile examples after U-Boot is compiled.
1212 examples: $(filter-out examples, $(u-boot-dirs))
1213
1214 define filechk_uboot.release
1215         echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1216 endef
1217
1218 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1219 include/config/uboot.release: include/config/auto.conf FORCE
1220         $(call filechk,uboot.release)
1221
1222
1223 # Things we need to do before we recursively start building the kernel
1224 # or the modules are listed in "prepare".
1225 # A multi level approach is used. prepareN is processed before prepareN-1.
1226 # archprepare is used in arch Makefiles and when processed asm symlink,
1227 # version.h and scripts_basic is processed / created.
1228
1229 # Listed in dependency order
1230 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1231
1232 # prepare3 is used to check if we are building in a separate output directory,
1233 # and if so do:
1234 # 1) Check that make has not been executed in the kernel src $(srctree)
1235 prepare3: include/config/uboot.release
1236 ifneq ($(KBUILD_SRC),)
1237         @$(kecho) '  Using $(srctree) as source for U-Boot'
1238         $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1239                 echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
1240                 echo >&2 "  in the '$(srctree)' directory.";\
1241                 /bin/false; \
1242         fi;
1243 endif
1244
1245 # prepare2 creates a makefile if using a separate output directory
1246 prepare2: prepare3 outputmakefile
1247
1248 prepare1: prepare2 $(version_h) $(timestamp_h) \
1249                    include/config/auto.conf
1250 ifeq ($(CONFIG_HAVE_GENERIC_BOARD),)
1251 ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
1252         @echo >&2 "  Your architecture does not support generic board."
1253         @echo >&2 "  Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1254         @/bin/false
1255 endif
1256 endif
1257 ifeq ($(wildcard $(LDSCRIPT)),)
1258         @echo >&2 "  Could not find linker script."
1259         @/bin/false
1260 endif
1261
1262 archprepare: prepare1 scripts_basic
1263
1264 prepare0: archprepare FORCE
1265         $(Q)$(MAKE) $(build)=.
1266
1267 # All the preparing..
1268 prepare: prepare0
1269
1270 # Generate some files
1271 # ---------------------------------------------------------------------------
1272
1273 define filechk_version.h
1274         (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1275         echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1276         echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1277         echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1278 endef
1279
1280 # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1281 # The BSD date on the other hand behaves different and would produce errors
1282 # with the misused '-d' switch.  Respect that and search a working date with
1283 # well known pre- and suffixes for the GNU variant of date.
1284 define filechk_timestamp.h
1285         (if test -n "$${SOURCE_DATE_EPOCH}"; then \
1286                 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
1287                 DATE=""; \
1288                 for date in gdate date.gnu date; do \
1289                         $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1290                 done; \
1291                 if test -n "$${DATE}"; then \
1292                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1293                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1294                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
1295                         LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1296                 else \
1297                         return 42; \
1298                 fi; \
1299         else \
1300                 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1301                 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1302                 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
1303                 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1304         fi)
1305 endef
1306
1307 $(version_h): include/config/uboot.release FORCE
1308         $(call filechk,version.h)
1309
1310 $(timestamp_h): $(srctree)/Makefile FORCE
1311         $(call filechk,timestamp.h)
1312
1313 # ---------------------------------------------------------------------------
1314 quiet_cmd_cpp_lds = LDS     $@
1315 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
1316                 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
1317
1318 u-boot.lds: $(LDSCRIPT) prepare FORCE
1319         $(call if_changed_dep,cpp_lds)
1320
1321 spl/u-boot-spl.bin: spl/u-boot-spl
1322         @:
1323 spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
1324         $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
1325
1326 spl/sunxi-spl.bin: spl/u-boot-spl
1327         @:
1328
1329 spl/u-boot-spl-dtb.sfp: spl/u-boot-spl
1330         @:
1331
1332 tpl/u-boot-tpl.bin: tools prepare
1333         $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
1334
1335 TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
1336
1337 FIND := find
1338 FINDFLAGS := -L
1339
1340 tags ctags:
1341                 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1342                                                 -name '*.[chS]' -print`
1343                 ln -s ctags tags
1344
1345 etags:
1346                 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1347                                                 -name '*.[chS]' -print`
1348 cscope:
1349                 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1350                                                 cscope.files
1351                 cscope -b -q -k
1352
1353 SYSTEM_MAP = \
1354                 $(NM) $1 | \
1355                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1356                 LC_ALL=C sort
1357 System.map:     u-boot
1358                 @$(call SYSTEM_MAP,$<) > $@
1359
1360 checkdtc:
1361         @if test $(call dtc-version) -lt 0104; then \
1362                 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1363                 false; \
1364         fi
1365
1366 #########################################################################
1367
1368 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1369 # R_AARCH64_RELATIVE (64-bit).
1370 checkarmreloc: u-boot
1371         @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1372                 grep R_A | sort -u`"; \
1373         if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1374                  "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1375                 echo "$< contains unexpected relocations: $$RELOC"; \
1376                 false; \
1377         fi
1378
1379 env: scripts_basic
1380         $(Q)$(MAKE) $(build)=tools/$@
1381
1382 tools-only: scripts_basic $(version_h) $(timestamp_h)
1383         $(Q)$(MAKE) $(build)=tools
1384
1385 tools-all: export HOST_TOOLS_ALL=y
1386 tools-all: env tools ;
1387
1388 cross_tools: export CROSS_BUILD_TOOLS=y
1389 cross_tools: tools ;
1390
1391 .PHONY : CHANGELOG
1392 CHANGELOG:
1393         git log --no-merges U-Boot-1_1_5.. | \
1394         unexpand -a | sed -e 's/\s\s*$$//' > $@
1395
1396 include/license.h: tools/bin2header COPYING
1397         cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
1398 #########################################################################
1399
1400 ###
1401 # Cleaning is done on three levels.
1402 # make clean     Delete most generated files
1403 #                Leave enough to build external modules
1404 # make mrproper  Delete the current configuration, and all generated files
1405 # make distclean Remove editor backup files, patch leftover files and the like
1406
1407 # Directories & files removed with 'make clean'
1408 CLEAN_DIRS  += $(MODVERDIR) \
1409                $(foreach d, spl tpl, $(patsubst %,$d/%, \
1410                         $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
1411
1412 CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
1413                boot* u-boot* MLO* SPL System.map
1414
1415 # Directories & files removed with 'make mrproper'
1416 MRPROPER_DIRS  += include/config include/generated spl tpl \
1417                   .tmp_objdiff
1418 MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1419                   ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1420
1421 # clean - Delete most, but leave enough to build external modules
1422 #
1423 clean: rm-dirs  := $(CLEAN_DIRS)
1424 clean: rm-files := $(CLEAN_FILES)
1425
1426 clean-dirs      := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
1427
1428 clean-dirs      := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
1429
1430 PHONY += $(clean-dirs) clean archclean
1431 $(clean-dirs):
1432         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1433
1434 # TODO: Do not use *.cfgtmp
1435 clean: $(clean-dirs)
1436         $(call cmd,rmdirs)
1437         $(call cmd,rmfiles)
1438         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1439                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1440                 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1441                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1442                 -o -name '*.symtypes' -o -name 'modules.order' \
1443                 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1444                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1445
1446 # mrproper - Delete all generated files, including .config
1447 #
1448 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1449 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1450 mrproper-dirs      := $(addprefix _mrproper_,scripts)
1451
1452 PHONY += $(mrproper-dirs) mrproper archmrproper
1453 $(mrproper-dirs):
1454         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1455
1456 mrproper: clean $(mrproper-dirs)
1457         $(call cmd,rmdirs)
1458         $(call cmd,rmfiles)
1459         @rm -f arch/*/include/asm/arch
1460
1461 # distclean
1462 #
1463 PHONY += distclean
1464
1465 distclean: mrproper
1466         @find $(srctree) $(RCS_FIND_IGNORE) \
1467                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1468                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1469                 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1470                 -o -name '*.pyc' \) \
1471                 -type f -print | xargs rm -f
1472         @rm -f boards.cfg
1473
1474 backup:
1475         F=`basename $(srctree)` ; cd .. ; \
1476         gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1477
1478 help:
1479         @echo  'Cleaning targets:'
1480         @echo  '  clean           - Remove most generated files but keep the config'
1481         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1482         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1483         @echo  ''
1484         @echo  'Configuration targets:'
1485         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1486         @echo  ''
1487         @echo  'Other generic targets:'
1488         @echo  '  all             - Build all necessary images depending on configuration'
1489         @echo  '* u-boot          - Build the bare u-boot'
1490         @echo  '  dir/            - Build all files in dir and below'
1491         @echo  '  dir/file.[oisS] - Build specified target only'
1492         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1493         @echo  '                    (requires a recent binutils and recent build (System.map))'
1494         @echo  '  tags/ctags      - Generate ctags file for editors'
1495         @echo  '  etags           - Generate etags file for editors'
1496         @echo  '  cscope          - Generate cscope index'
1497         @echo  '  ubootrelease    - Output the release version string (use with make -s)'
1498         @echo  '  ubootversion    - Output the version stored in Makefile (use with make -s)'
1499         @echo  ''
1500         @echo  'Static analysers'
1501         @echo  '  checkstack      - Generate a list of stack hogs'
1502         @echo  ''
1503         @echo  'Documentation targets:'
1504         @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1505         @echo  ''
1506         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1507         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1508         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1509         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1510         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1511         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1512         @echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1513         @echo  '                1: warnings which may be relevant and do not occur too often'
1514         @echo  '                2: warnings which occur quite often but may still be relevant'
1515         @echo  '                3: more obscure warnings, can most likely be ignored'
1516         @echo  '                Multiple levels can be combined with W=12 or W=123'
1517         @echo  ''
1518         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1519         @echo  'For further info see the ./README file'
1520
1521
1522 # Documentation targets
1523 # ---------------------------------------------------------------------------
1524 %docs: scripts_basic FORCE
1525         $(Q)$(MAKE) $(build)=scripts build_docproc
1526         $(Q)$(MAKE) $(build)=doc/DocBook $@
1527
1528 # Dummies...
1529 PHONY += prepare scripts
1530 prepare: ;
1531 scripts: ;
1532
1533 endif #ifeq ($(config-targets),1)
1534 endif #ifeq ($(mixed-targets),1)
1535
1536 PHONY += checkstack ubootrelease ubootversion
1537
1538 checkstack:
1539         $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1540         $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1541
1542 ubootrelease:
1543         @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1544
1545 ubootversion:
1546         @echo $(UBOOTVERSION)
1547
1548 # Single targets
1549 # ---------------------------------------------------------------------------
1550 # Single targets are compatible with:
1551 # - build with mixed source and output
1552 # - build with separate output dir 'make O=...'
1553 # - external modules
1554 #
1555 #  target-dir => where to store outputfile
1556 #  build-dir  => directory in kernel source tree to use
1557
1558 ifeq ($(KBUILD_EXTMOD),)
1559         build-dir  = $(patsubst %/,%,$(dir $@))
1560         target-dir = $(dir $@)
1561 else
1562         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1563         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1564         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1565 endif
1566
1567 %.s: %.c prepare scripts FORCE
1568         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1569 %.i: %.c prepare scripts FORCE
1570         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1571 %.o: %.c prepare scripts FORCE
1572         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1573 %.lst: %.c prepare scripts FORCE
1574         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1575 %.s: %.S prepare scripts FORCE
1576         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1577 %.o: %.S prepare scripts FORCE
1578         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1579 %.symtypes: %.c prepare scripts FORCE
1580         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1581
1582 # Modules
1583 /: prepare scripts FORCE
1584         $(cmd_crmodverdir)
1585         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1586         $(build)=$(build-dir)
1587 %/: prepare scripts FORCE
1588         $(cmd_crmodverdir)
1589         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1590         $(build)=$(build-dir)
1591 %.ko: prepare scripts FORCE
1592         $(cmd_crmodverdir)
1593         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1594         $(build)=$(build-dir) $(@:.ko=.o)
1595         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1596
1597 # FIXME Should go into a make.lib or something
1598 # ===========================================================================
1599
1600 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1601       cmd_rmdirs = rm -rf $(rm-dirs)
1602
1603 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1604       cmd_rmfiles = rm -f $(rm-files)
1605
1606 # read all saved command lines
1607
1608 targets := $(wildcard $(sort $(targets)))
1609 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1610
1611 ifneq ($(cmd_files),)
1612   $(cmd_files): ;       # Do not try to update included dependency files
1613   include $(cmd_files)
1614 endif
1615
1616 endif   # skip-makefile
1617
1618 PHONY += FORCE
1619 FORCE:
1620
1621 # Declare the contents of the .PHONY variable as phony.  We keep that
1622 # information in a variable so we can use it in if_changed and friends.
1623 .PHONY: $(PHONY)