Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 11
  26 SUBLEVEL =
  27 EXTRAVERSION =
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 endif
 234 ifeq ($(CPU),mpc86xx)
 235 LIBS += cpu/mpc8xxx/ddr/libddr.a
 236 LIBS += cpu/mpc8xxx/lib8xxx.a
 237 endif
 238 LIBS += drivers/rtc/librtc.a
 239 LIBS += drivers/serial/libserial.a
 240 LIBS += drivers/twserial/libtws.a
 241 LIBS += drivers/usb/gadget/libusb_gadget.a
 242 LIBS += drivers/usb/host/libusb_host.a
 243 LIBS += drivers/usb/musb/libusb_musb.a
 244 LIBS += drivers/usb/phy/libusb_phy.a
 245 LIBS += drivers/video/libvideo.a
 246 LIBS += drivers/watchdog/libwatchdog.a
 247 LIBS += common/libcommon.a
 248 LIBS += libfdt/libfdt.a
 249 LIBS += api/libapi.a
 250 LIBS += post/libpost.a
 251
 252 LIBS := $(addprefix $(obj),$(LIBS))
 253 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 254
 255 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 256 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 257
 258 # Add GCC lib
 259 ifdef USE_PRIVATE_LIBGCC
 260 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 261 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 262 else
 263 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 264 endif
 265 else
 266 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 267 endif
 268 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 269 export PLATFORM_LIBS
 270
 271 # Special flags for CPP when processing the linker script.
 272 # Pass the version down so we can handle backwards compatibility
 273 # on the fly.
 274 LDPPFLAGS += \
 275         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 276         $(shell $(LD) --version | \
 277           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 278
 279 ifeq ($(CONFIG_NAND_U_BOOT),y)
 280 NAND_SPL = nand_spl
 281 U_BOOT_NAND = $(obj)u-boot-nand.bin
 282 endif
 283
 284 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 285 ONENAND_IPL = onenand_ipl
 286 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 287 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 288 endif
 289
 290 __OBJS := $(subst $(obj),,$(OBJS))
 291 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 292
 293 #########################################################################
 294 #########################################################################
 295
 296 # Always append ALL so that arch config.mk's can add custom ones
 297 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 298
 299 all:            $(ALL)
 300
 301 $(obj)u-boot.hex:       $(obj)u-boot
 302                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 303
 304 $(obj)u-boot.srec:      $(obj)u-boot
 305                 $(OBJCOPY) -O srec $< $@
 306
 307 $(obj)u-boot.bin:       $(obj)u-boot
 308                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 309
 310 $(obj)u-boot.ldr:       $(obj)u-boot
 311                 $(CREATE_LDR_ENV)
 312                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 313
 314 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 315                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 316
 317 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 318                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 319
 320 $(obj)u-boot.img:       $(obj)u-boot.bin
 321                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 322                 -a $(TEXT_BASE) -e 0 \
 323                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 324                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 325                 -d $< $@
 326
 327 $(obj)u-boot.imx:       $(obj)u-boot.bin
 328                 $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
 329                 -e $(TEXT_BASE) -d $< $@
 330
 331 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 332                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 333                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 334
 335 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 336                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 337
 338 $(obj)u-boot.dis:       $(obj)u-boot
 339                 $(OBJDUMP) -d $< > $@
 340
 341 GEN_UBOOT = \
 342                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 343                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 344                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 345                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 346                         -Map u-boot.map -o u-boot
 347 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 348                 $(GEN_UBOOT)
 349 ifeq ($(CONFIG_KALLSYMS),y)
 350                 smap=`$(call SYSTEM_MAP,u-boot) | \
 351                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 352                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 353                         -c common/system_map.c -o $(obj)common/system_map.o
 354                 $(GEN_UBOOT) $(obj)common/system_map.o
 355 endif
 356
 357 $(OBJS):        depend
 358                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 359
 360 $(LIBS):        depend $(SUBDIRS)
 361                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 362
 363 $(LIBBOARD):    depend $(LIBS)
 364                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 365
 366 $(SUBDIRS):     depend
 367                 $(MAKE) -C $@ all
 368
 369 $(LDSCRIPT):    depend
 370                 $(MAKE) -C $(dir $@) $(notdir $@)
 371
 372 $(obj)u-boot.lds: $(LDSCRIPT)
 373                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 374
 375 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 376                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 377
 378 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 379                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 380
 381 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 382                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 383
 384 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 385                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 386
 387 $(VERSION_FILE):
 388                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 389                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 390                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 391
 392 $(TIMESTAMP_FILE):
 393                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 394                 @date +'#define U_BOOT_TIME "%T"' >> $@
 395
 396 gdbtools:
 397                 $(MAKE) -C tools/gdb all || exit 1
 398
 399 updater:
 400                 $(MAKE) -C tools/updater all || exit 1
 401
 402 env:
 403                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 404
 405 # Explicitly make _depend in subdirs containing multiple targets to prevent
 406 # parallel sub-makes creating .depend files simultaneously.
 407 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 408                 for dir in $(SUBDIRS) cpu/$(CPU) $(dir $(LDSCRIPT)) ; do \
 409                         $(MAKE) -C $$dir _depend ; done
 410
 411 TAG_SUBDIRS = $(SUBDIRS)
 412 TAG_SUBDIRS += $(dir $(__LIBS))
 413 TAG_SUBDIRS += include
 414
 415 tags ctags:
 416                 ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
 417                                                 -name '*.[chS]' -print`
 418
 419 etags:
 420                 etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
 421                                                 -name '*.[chS]' -print`
 422 cscope:
 423                 find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
 424                 cscope -b -q -k
 425
 426 SYSTEM_MAP = \
 427                 $(NM) $1 | \
 428                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 429                 LC_ALL=C sort
 430 $(obj)System.map:       $(obj)u-boot
 431                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 432
 433 #
 434 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 435 #
 436 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 437 # the dep file is only include in this top level makefile to determine when
 438 # to regenerate the autoconf.mk file.
 439 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 440         @$(XECHO) Generating $@ ; \
 441         set -e ; \
 442         : Generate the dependancies ; \
 443         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 444                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 445
 446 $(obj)include/autoconf.mk: $(obj)include/config.h
 447         @$(XECHO) Generating $@ ; \
 448         set -e ; \
 449         : Extract the config macros ; \
 450         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 451                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 452         mv $@.tmp $@
 453
 454 #########################################################################
 455 else    # !config.mk
 456 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 457 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 458 $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \
 459 updater env depend dep tags ctags etags cscope $(obj)System.map:
 460         @echo "System not configured - see README" >&2
 461         @ exit 1
 462
 463 tools:
 464         $(MAKE) -C tools
 465 tools-all:
 466         $(MAKE) -C tools HOST_TOOLS_ALL=y
 467 endif   # config.mk
 468
 469 .PHONY : CHANGELOG
 470 CHANGELOG:
 471         git log --no-merges U-Boot-1_1_5.. | \
 472         unexpand -a | sed -e 's/\s\s*$$//' > $@
 473
 474 include/license.h: tools/bin2header COPYING
 475          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 476 #########################################################################
 477
 478 unconfig:
 479         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 480                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 481                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 482
 483 %: %_config
 484         $(MAKE)
 485
 486 #========================================================================
 487 # PowerPC
 488 #========================================================================
 489
 490 #########################################################################
 491 ## MPC5xx Systems
 492 #########################################################################
 493
 494 canmb_config:   unconfig
 495         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 496
 497 cmi_mpc5xx_config:      unconfig
 498         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 499
 500 PATI_config:            unconfig
 501         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 502
 503 #########################################################################
 504 ## MPC5xxx Systems
 505 #########################################################################
 506
 507 aev_config: unconfig
 508         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 509
 510 BC3450_config:  unconfig
 511         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 512
 513 cm5200_config:  unconfig
 514         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 515
 516 cpci5200_config:  unconfig
 517         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 518
 519 digsy_mtc_config \
 520 digsy_mtc_LOWBOOT_config        \
 521 digsy_mtc_RAMBOOT_config:       unconfig
 522         @mkdir -p $(obj)include
 523         @mkdir -p $(obj)board/digsy_mtc
 524         @ >$(obj)include/config.h
 525         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 526                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 527                   echo "... with LOWBOOT configuration" ; \
 528                 }
 529         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 530                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 531                   echo "... with RAMBOOT configuration" ; \
 532                 }
 533         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 534
 535 galaxy5200_LOWBOOT_config \
 536 galaxy5200_config:      unconfig
 537         @mkdir -p $(obj)include
 538         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 539         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 540
 541 hmi1001_config: unconfig
 542         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 543
 544 Lite5200_config                         \
 545 Lite5200_LOWBOOT_config                 \
 546 Lite5200_LOWBOOT08_config               \
 547 icecube_5200_config                     \
 548 icecube_5200_LOWBOOT_config             \
 549 icecube_5200_LOWBOOT08_config           \
 550 icecube_5200_DDR_config                 \
 551 icecube_5200_DDR_LOWBOOT_config         \
 552 icecube_5200_DDR_LOWBOOT08_config       \
 553 icecube_5100_config:                    unconfig
 554         @mkdir -p $(obj)include
 555         @mkdir -p $(obj)board/icecube
 556         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 557                 { if [ "$(findstring DDR,$@)" ] ; \
 558                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 559                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 560                   fi ; \
 561                   $(XECHO) "... with LOWBOOT configuration" ; \
 562                 }
 563         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 564                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 565                   echo "... with 8 MB flash only" ; \
 566                   $(XECHO) "... with LOWBOOT configuration" ; \
 567                 }
 568         @[ -z "$(findstring DDR,$@)" ] || \
 569                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 570                   $(XECHO) "... DDR memory revision" ; \
 571                 }
 572         @[ -z "$(findstring 5200,$@)" ] || \
 573                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 574                   $(XECHO) "... with MPC5200 processor" ; \
 575                 }
 576         @[ -z "$(findstring 5100,$@)" ] || \
 577                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 578                   $(XECHO) "... with MGT5100 processor" ; \
 579                 }
 580         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 581
 582 jupiter_config: unconfig
 583         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 584
 585 inka4x0_config: unconfig
 586         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 587
 588 ipek01_config: unconfig
 589         @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
 590
 591 lite5200b_config        \
 592 lite5200b_PM_config     \
 593 lite5200b_LOWBOOT_config:       unconfig
 594         @mkdir -p $(obj)include
 595         @mkdir -p $(obj)board/icecube
 596         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 597         @ $(XECHO) "... DDR memory revision"
 598         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 599         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 600         @[ -z "$(findstring _PM_,$@)" ] || \
 601                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 602                   $(XECHO) "... with power management (low-power mode) support" ; \
 603                 }
 604         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 605                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 606                   $(XECHO) "... with LOWBOOT configuration" ; \
 607                 }
 608         @ $(XECHO) "... with MPC5200B processor"
 609         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 610
 611 mcc200_config   \
 612 mcc200_SDRAM_config     \
 613 mcc200_highboot_config  \
 614 mcc200_COM12_config     \
 615 mcc200_COM12_SDRAM_config       \
 616 mcc200_COM12_highboot_config    \
 617 mcc200_COM12_highboot_SDRAM_config      \
 618 mcc200_highboot_SDRAM_config    \
 619 prs200_config   \
 620 prs200_DDR_config       \
 621 prs200_highboot_config  \
 622 prs200_highboot_DDR_config:     unconfig
 623         @mkdir -p $(obj)include
 624         @mkdir -p $(obj)board/mcc200
 625         @[ -n "$(findstring highboot,$@)" ] || \
 626                 { $(XECHO) "... with lowboot configuration" ; \
 627                 }
 628         @[ -z "$(findstring highboot,$@)" ] || \
 629                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 630                   $(XECHO) "... with highboot configuration" ; \
 631                 }
 632         @[ -n "$(findstring _SDRAM,$@)" ] || \
 633                 { if [ -n "$(findstring mcc200,$@)" ]; \
 634                   then \
 635                         $(XECHO) "... with DDR" ; \
 636                   else \
 637                         if [ -n "$(findstring _DDR,$@)" ];\
 638                         then \
 639                                 $(XECHO) "... with DDR" ; \
 640                         else \
 641                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 642                                 $(XECHO) "... with SDRAM" ; \
 643                         fi; \
 644                   fi; \
 645                 }
 646         @[ -z "$(findstring _SDRAM,$@)" ] || \
 647                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 648                   $(XECHO) "... with SDRAM" ; \
 649                 }
 650         @[ -z "$(findstring COM12,$@)" ] || \
 651                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 652                   $(XECHO) "... with console on COM12" ; \
 653                 }
 654         @[ -z "$(findstring prs200,$@)" ] || \
 655                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 656                 }
 657         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 658
 659 mecp5200_config:  unconfig
 660         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 661
 662 motionpro_config:       unconfig
 663         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 664
 665 mucmc52_config:         unconfig
 666         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 667
 668 munices_config: unconfig
 669         @$(MKCONFIG) munices ppc mpc5xxx munices
 670
 671 MVBC_P_config: unconfig
 672         @mkdir -p $(obj)include
 673         @mkdir -p $(obj)board/mvbc_p
 674         @ >$(obj)include/config.h
 675         @[ -z "$(findstring MVBC_P,$@)" ] || \
 676         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 677         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 678
 679 o2dnt_config:   unconfig
 680         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 681
 682 pcm030_config \
 683 pcm030_LOWBOOT_config:  unconfig
 684         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 685         @ >$(obj)include/config.h
 686         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 687                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 688                   echo "... with LOWBOOT configuration" ; \
 689                 }
 690         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 691
 692 pf5200_config:  unconfig
 693         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 694
 695 PM520_config \
 696 PM520_DDR_config \
 697 PM520_ROMBOOT_config \
 698 PM520_ROMBOOT_DDR_config:       unconfig
 699         @mkdir -p $(obj)include
 700         @[ -z "$(findstring DDR,$@)" ] || \
 701                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 702                   $(XECHO) "... DDR memory revision" ; \
 703                 }
 704         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 705                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 706                   $(XECHO) "... booting from 8-bit flash" ; \
 707                 }
 708         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 709
 710 smmaco4_config: unconfig
 711         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 712
 713 spieval_config: unconfig
 714         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 715
 716 TB5200_B_config \
 717 TB5200_config:  unconfig
 718         @mkdir -p $(obj)include
 719         @[ -z "$(findstring _B,$@)" ] || \
 720                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 721                   $(XECHO) "... with MPC5200B processor" ; \
 722                 }
 723         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 724
 725 MINI5200_config \
 726 EVAL5200_config \
 727 TOP5200_config: unconfig
 728         @mkdir -p $(obj)include
 729         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 730         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 731
 732 Total5100_config                \
 733 Total5200_config                \
 734 Total5200_lowboot_config        \
 735 Total5200_Rev2_config           \
 736 Total5200_Rev2_lowboot_config:  unconfig
 737         @mkdir -p $(obj)include
 738         @mkdir -p $(obj)board/total5200
 739         @[ -z "$(findstring 5100,$@)" ] || \
 740                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 741                   $(XECHO) "... with MGT5100 processor" ; \
 742                 }
 743         @[ -z "$(findstring 5200,$@)" ] || \
 744                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 745                   $(XECHO) "... with MPC5200 processor" ; \
 746                 }
 747         @[ -n "$(findstring Rev,$@)" ] || \
 748                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 749                   $(XECHO) "... revision 1 board" ; \
 750                 }
 751         @[ -z "$(findstring Rev2_,$@)" ] || \
 752                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 753                   $(XECHO) "... revision 2 board" ; \
 754                 }
 755         @[ -z "$(findstring lowboot_,$@)" ] || \
 756                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 757                   $(XECHO) "... with lowboot configuration" ; \
 758                 }
 759         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 760
 761 cam5200_config \
 762 cam5200_niosflash_config \
 763 fo300_config \
 764 MiniFAP_config \
 765 TQM5200S_config \
 766 TQM5200S_HIGHBOOT_config \
 767 TQM5200_B_config \
 768 TQM5200_B_HIGHBOOT_config \
 769 TQM5200_config  \
 770 TQM5200_STK100_config:  unconfig
 771         @mkdir -p $(obj)include
 772         @mkdir -p $(obj)board/tqc/tqm5200
 773         @[ -z "$(findstring cam5200,$@)" ] || \
 774                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 775                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 776                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 777                   $(XECHO) "... TQM5200S on Cam5200" ; \
 778                 }
 779         @[ -z "$(findstring niosflash,$@)" ] || \
 780                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 781                   $(XECHO) "... with NIOS flash driver" ; \
 782                 }
 783         @[ -z "$(findstring fo300,$@)" ] || \
 784                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 785                   $(XECHO) "... TQM5200 on FO300" ; \
 786                 }
 787         @[ -z "$(findstring MiniFAP,$@)" ] || \
 788                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 789                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 790                 }
 791         @[ -z "$(findstring STK100,$@)" ] || \
 792                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 793                   $(XECHO) "... on a STK52XX.100 base board" ; \
 794                 }
 795         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 796                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 797                 }
 798         @[ -z "$(findstring TQM5200S,$@)" ] || \
 799                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 800                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 801                 }
 802         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 803                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 804                 }
 805         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 806
 807 uc101_config:           unconfig
 808         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 809
 810 v38b_config: unconfig
 811         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 812
 813 #########################################################################
 814 ## MPC512x Systems
 815 #########################################################################
 816
 817 aria_config:    unconfig
 818         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 819
 820 mecp5123_config:        unconfig
 821         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 822
 823 mpc5121ads_config \
 824 mpc5121ads_rev2_config  \
 825         : unconfig
 826         @mkdir -p $(obj)include
 827         @if [ "$(findstring rev2,$@)" ] ; then \
 828                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 829         fi
 830         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 831
 832 #########################################################################
 833 ## MPC8xx Systems
 834 #########################################################################
 835
 836 Adder_config    \
 837 Adder87x_config \
 838 AdderII_config  \
 839         :               unconfig
 840         @mkdir -p $(obj)include
 841         $(if $(findstring AdderII,$@), \
 842         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 843         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 844
 845 AdderUSB_config:        unconfig
 846         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 847
 848 ADS860_config     \
 849 FADS823_config    \
 850 FADS850SAR_config \
 851 MPC86xADS_config  \
 852 MPC885ADS_config  \
 853 FADS860T_config:        unconfig
 854         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 855
 856 AMX860_config   :       unconfig
 857         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 858
 859 c2mon_config:           unconfig
 860         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 861
 862 CCM_config:             unconfig
 863         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 864
 865 cogent_mpc8xx_config:   unconfig
 866         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 867
 868 ELPT860_config:         unconfig
 869         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 870
 871 EP88x_config:           unconfig
 872         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 873
 874 ESTEEM192E_config:      unconfig
 875         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 876
 877 ETX094_config   :       unconfig
 878         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 879
 880 FLAGADM_config: unconfig
 881         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 882
 883 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 884
 885 GEN860T_SC_config       \
 886 GEN860T_config: unconfig
 887         @mkdir -p $(obj)include
 888         @[ -z "$(findstring _SC,$@)" ] || \
 889                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 890                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 891                 }
 892         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 893
 894 GENIETV_config: unconfig
 895         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 896
 897 GTH_config:     unconfig
 898         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 899
 900 hermes_config   :       unconfig
 901         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 902
 903 HMI10_config    :       unconfig
 904         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 905
 906 IAD210_config: unconfig
 907         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 908
 909 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 910
 911 ICU862_100MHz_config    \
 912 ICU862_config: unconfig
 913         @mkdir -p $(obj)include
 914         @[ -z "$(findstring _100MHz,$@)" ] || \
 915                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 916                   $(XECHO) "... with 100MHz system clock" ; \
 917                 }
 918         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 919
 920 IP860_config    :       unconfig
 921         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 922
 923 IVML24_256_config \
 924 IVML24_128_config \
 925 IVML24_config:  unconfig
 926         @mkdir -p $(obj)include
 927         @[ -z "$(findstring IVML24_config,$@)" ] || \
 928                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 929                  }
 930         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 931                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 932                  }
 933         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 934                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 935                  }
 936         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 937
 938 IVMS8_256_config \
 939 IVMS8_128_config \
 940 IVMS8_config:   unconfig
 941         @mkdir -p $(obj)include
 942         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 943                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 944                  }
 945         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 946                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 947                  }
 948         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 949                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 950                  }
 951         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 952
 953 kmsupx4_config:         unconfig
 954         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 955
 956 KUP4K_config    :       unconfig
 957         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 958
 959 KUP4X_config    :       unconfig
 960         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 961
 962 LANTEC_config   :       unconfig
 963         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 964
 965 lwmon_config:           unconfig
 966         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 967
 968 MBX_config      \
 969 MBX860T_config: unconfig
 970         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 971
 972 mgsuvd_config:          unconfig
 973         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 974
 975 MHPC_config:            unconfig
 976         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 977
 978 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
 979
 980 NETVIA_V2_config \
 981 NETVIA_config:          unconfig
 982         @mkdir -p $(obj)include
 983         @[ -z "$(findstring NETVIA_config,$@)" ] || \
 984                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
 985                   $(XECHO) "... Version 1" ; \
 986                  }
 987         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
 988                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
 989                   $(XECHO) "... Version 2" ; \
 990                  }
 991         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 992
 993 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
 994
 995 NETPHONE_V2_config \
 996 NETPHONE_config:        unconfig
 997         @mkdir -p $(obj)include
 998         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
 999                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
1000                  }
1001         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
1002                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
1003                  }
1004         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
1005
1006 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
1007
1008 NETTA_ISDN_6412_SWAPHOOK_config \
1009 NETTA_ISDN_SWAPHOOK_config \
1010 NETTA_6412_SWAPHOOK_config \
1011 NETTA_SWAPHOOK_config \
1012 NETTA_ISDN_6412_config \
1013 NETTA_ISDN_config \
1014 NETTA_6412_config \
1015 NETTA_config:           unconfig
1016         @mkdir -p $(obj)include
1017         @[ -z "$(findstring ISDN_,$@)" ] || \
1018                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1019                  }
1020         @[ -n "$(findstring ISDN_,$@)" ] || \
1021                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1022                  }
1023         @[ -z "$(findstring 6412_,$@)" ] || \
1024                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1025                  }
1026         @[ -n "$(findstring 6412_,$@)" ] || \
1027                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1028                  }
1029         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1030                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1031                  }
1032         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1033                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1034                  }
1035         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1036
1037 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1038
1039 NETTA2_V2_config \
1040 NETTA2_config:          unconfig
1041         @mkdir -p $(obj)include
1042         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1043                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1044                  }
1045         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1046                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1047                  }
1048         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1049
1050 NC650_Rev1_config \
1051 NC650_Rev2_config \
1052 CP850_config:   unconfig
1053         @mkdir -p $(obj)include
1054         @[ -z "$(findstring CP850,$@)" ] || \
1055                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1056                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1057                  }
1058         @[ -z "$(findstring Rev1,$@)" ] || \
1059                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1060                  }
1061         @[ -z "$(findstring Rev2,$@)" ] || \
1062                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1063                  }
1064         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1065
1066 NX823_config:           unconfig
1067         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1068
1069 pcu_e_config:           unconfig
1070         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1071
1072 QS850_config:   unconfig
1073         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1074
1075 QS823_config:   unconfig
1076         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1077
1078 QS860T_config:  unconfig
1079         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1080
1081 quantum_config: unconfig
1082         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1083
1084 R360MPI_config: unconfig
1085         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1086
1087 RBC823_config:  unconfig
1088         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1089
1090 RPXClassic_config:      unconfig
1091         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1092
1093 RPXlite_config:         unconfig
1094         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1095
1096 RPXlite_DW_64_config            \
1097 RPXlite_DW_LCD_config           \
1098 RPXlite_DW_64_LCD_config        \
1099 RPXlite_DW_NVRAM_config         \
1100 RPXlite_DW_NVRAM_64_config      \
1101 RPXlite_DW_NVRAM_LCD_config     \
1102 RPXlite_DW_NVRAM_64_LCD_config  \
1103 RPXlite_DW_config:      unconfig
1104         @mkdir -p $(obj)include
1105         @[ -z "$(findstring _64,$@)" ] || \
1106                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1107                   $(XECHO) "... with 64MHz system clock ..."; \
1108                 }
1109         @[ -z "$(findstring _LCD,$@)" ] || \
1110                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1111                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1112                   $(XECHO) "... with LCD display ..."; \
1113                 }
1114         @[ -z "$(findstring _NVRAM,$@)" ] || \
1115                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1116                   $(XECHO) "... with ENV in NVRAM ..."; \
1117                 }
1118         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1119
1120 rmu_config:     unconfig
1121         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1122
1123 RRvision_config:        unconfig
1124         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1125
1126 RRvision_LCD_config:    unconfig
1127         @mkdir -p $(obj)include
1128         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1129         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1130         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1131
1132 SM850_config    :       unconfig
1133         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1134
1135 spc1920_config:         unconfig
1136         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1137
1138 SPD823TS_config:        unconfig
1139         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1140
1141 stxxtc_config:  unconfig
1142         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1143
1144 svm_sc8xx_config:       unconfig
1145         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1146
1147 SXNI855T_config:        unconfig
1148         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1149
1150 # EMK MPC8xx based modules
1151 TOP860_config:          unconfig
1152         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1153
1154 # Play some tricks for configuration selection
1155 # Only 855 and 860 boards may come with FEC
1156 # and only 823 boards may have LCD support
1157 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1158
1159 FPS850L_config          \
1160 FPS860L_config          \
1161 NSCU_config             \
1162 TQM823L_config          \
1163 TQM823L_LCD_config      \
1164 TQM850L_config          \
1165 TQM855L_config          \
1166 TQM860L_config          \
1167 TQM862L_config          \
1168 TQM823M_config          \
1169 TQM850M_config          \
1170 TQM855M_config          \
1171 TQM860M_config          \
1172 TQM862M_config          \
1173 TQM866M_config          \
1174 TQM885D_config          \
1175 TK885D_config           \
1176 virtlab2_config:        unconfig
1177         @mkdir -p $(obj)include
1178         @[ -z "$(findstring _LCD,$@)" ] || \
1179                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1180                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1181                   $(XECHO) "... with LCD display" ; \
1182                 }
1183         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1184
1185 TTTech_config:  unconfig
1186         @mkdir -p $(obj)include
1187         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1188         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1189         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1190
1191 uc100_config    :       unconfig
1192         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1193
1194 v37_config:     unconfig
1195         @mkdir -p $(obj)include
1196         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1197         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1198         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1199
1200 wtk_config:     unconfig
1201         @mkdir -p $(obj)include
1202         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1203         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1204         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1205
1206 #########################################################################
1207 ## PPC4xx Systems
1208 #########################################################################
1209 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1210
1211 acadia_config:  unconfig
1212         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1213
1214 acadia_nand_config:     unconfig
1215         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1216         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1217         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1218         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1219         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1220         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1221
1222 ADCIOP_config:  unconfig
1223         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1224
1225 alpr_config:    unconfig
1226         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1227
1228 AP1000_config:unconfig
1229         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1230
1231 APC405_config:  unconfig
1232         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1233
1234 AR405_config:   unconfig
1235         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1236
1237 ASH405_config:  unconfig
1238         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1239
1240 bamboo_config:  unconfig
1241         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1242
1243 bamboo_nand_config:     unconfig
1244         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1245         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1246         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1247         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1248         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1249         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1250
1251 bubinga_config: unconfig
1252         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1253
1254 CANBT_config:   unconfig
1255         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1256
1257 # Arches, Canyonlands & Glacier use different U-Boot images
1258 arches_config \
1259 canyonlands_config \
1260 glacier_config: unconfig
1261         @mkdir -p $(obj)include
1262         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1263                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1264         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1265
1266 canyonlands_nand_config \
1267 glacier_nand_config:    unconfig
1268         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1269         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1270         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1271         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1272                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1273         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1274         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1275         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1276
1277 CATcenter_config        \
1278 CATcenter_25_config     \
1279 CATcenter_33_config:    unconfig
1280         @mkdir -p $(obj)include
1281         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1282         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1283         @[ -z "$(findstring _25,$@)" ] || \
1284                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1285                   $(XECHO) "SysClk = 25MHz" ; \
1286                 }
1287         @[ -z "$(findstring _33,$@)" ] || \
1288                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1289                   $(XECHO) "SysClk = 33MHz" ; \
1290                 }
1291         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1292
1293 CMS700_config:  unconfig
1294         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1295
1296 CPCI2DP_config: unconfig
1297         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1298
1299 CPCI405_config          \
1300 CPCI4052_config         \
1301 CPCI405DT_config        \
1302 CPCI405AB_config:       unconfig
1303         @mkdir -p $(obj)board/esd/cpci405
1304         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1305
1306 CPCIISER4_config:       unconfig
1307         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1308
1309 CRAYL1_config:  unconfig
1310         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1311
1312 csb272_config:  unconfig
1313         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1314
1315 csb472_config:  unconfig
1316         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1317
1318 DASA_SIM_config: unconfig
1319         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1320
1321 dlvision_config: unconfig
1322         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1323
1324 DP405_config:   unconfig
1325         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1326
1327 DU405_config:   unconfig
1328         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1329
1330 DU440_config:   unconfig
1331         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1332
1333 ebony_config:   unconfig
1334         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1335
1336 ERIC_config:    unconfig
1337         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1338
1339 EXBITGEN_config:        unconfig
1340         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1341
1342 fx12mm_flash_config: unconfig
1343         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1344         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1345         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1346                 > $(obj)board/avnet/fx12mm/config.tmp
1347         @echo "TEXT_BASE := 0xFFCB0000" \
1348                 >> $(obj)board/avnet/fx12mm/config.tmp
1349         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1350
1351 fx12mm_config: unconfig
1352         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1353         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1354         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1355                 > $(obj)board/avnet/fx12mm/config.tmp
1356         @echo "TEXT_BASE := 0x03000000" \
1357                 >> $(obj)board/avnet/fx12mm/config.tmp
1358         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1359
1360 G2000_config:   unconfig
1361         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1362
1363 gdppc440etx_config:     unconfig
1364         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1365
1366 hcu4_config:    unconfig
1367         @mkdir -p $(obj)board/netstal/common
1368         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1369
1370 hcu5_config:    unconfig
1371         @mkdir -p $(obj)board/netstal/common
1372         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1373
1374 HH405_config:   unconfig
1375         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1376
1377 HUB405_config:  unconfig
1378         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1379
1380 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1381 intip_config \
1382 devconcenter_config:    unconfig
1383         @mkdir -p $(obj)include
1384         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1385                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1386         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1387
1388 JSE_config:     unconfig
1389         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1390
1391 KAREF_config: unconfig
1392         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1393
1394 katmai_config:  unconfig
1395         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1396
1397 # Kilauea & Haleakala images are identical (recognized via PVR)
1398 kilauea_config \
1399 haleakala_config: unconfig
1400         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1401
1402 kilauea_nand_config \
1403 haleakala_nand_config: unconfig
1404         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1405         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1406         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1407         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1408         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1409         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1410
1411 korat_config:   unconfig
1412         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1413
1414 luan_config:    unconfig
1415         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1416
1417 lwmon5_config:  unconfig
1418         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1419
1420 makalu_config:  unconfig
1421         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1422
1423 mcu25_config:  unconfig
1424         @mkdir -p $(obj)board/netstal/common
1425         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1426
1427 METROBOX_config: unconfig
1428         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1429
1430 MIP405_config:  unconfig
1431         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1432
1433 MIP405T_config: unconfig
1434         @mkdir -p $(obj)include
1435         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1436         @$(XECHO) "Enable subset config for MIP405T"
1437         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1438
1439 ML2_config:     unconfig
1440         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1441
1442 ml300_config:   unconfig
1443         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1444
1445 ml507_flash_config: unconfig
1446         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1447         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1448         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1449                 > $(obj)board/xilinx/ml507/config.tmp
1450         @echo "TEXT_BASE := 0xFE360000" \
1451                 >> $(obj)board/xilinx/ml507/config.tmp
1452         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1453
1454 ml507_config: unconfig
1455         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1456         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1457         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1458                 > $(obj)board/xilinx/ml507/config.tmp
1459         @echo "TEXT_BASE := 0x04000000"  \
1460                 >> $(obj)board/xilinx/ml507/config.tmp
1461         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1462
1463 neo_config:     unconfig
1464         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1465
1466 ocotea_config:  unconfig
1467         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1468
1469 OCRTC_config            \
1470 ORSG_config:    unconfig
1471         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1472
1473 p3p440_config:  unconfig
1474         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1475
1476 PCI405_config:  unconfig
1477         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1478
1479 pcs440ep_config:        unconfig
1480         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1481
1482 PIP405_config:  unconfig
1483         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1484
1485 PLU405_config:  unconfig
1486         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1487
1488 PMC405_config:  unconfig
1489         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1490
1491 PMC405DE_config:        unconfig
1492         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1493
1494 PMC440_config:  unconfig
1495         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1496
1497 PPChameleonEVB_config           \
1498 PPChameleonEVB_BA_25_config     \
1499 PPChameleonEVB_ME_25_config     \
1500 PPChameleonEVB_HI_25_config     \
1501 PPChameleonEVB_BA_33_config     \
1502 PPChameleonEVB_ME_33_config     \
1503 PPChameleonEVB_HI_33_config:    unconfig
1504         @mkdir -p $(obj)include
1505         @[ -z "$(findstring EVB_BA,$@)" ] || \
1506                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1507                   $(XECHO) "... BASIC model" ; \
1508                 }
1509         @[ -z "$(findstring EVB_ME,$@)" ] || \
1510                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1511                   $(XECHO) "... MEDIUM model" ; \
1512                 }
1513         @[ -z "$(findstring EVB_HI,$@)" ] || \
1514                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1515                   $(XECHO) "... HIGH-END model" ; \
1516                 }
1517         @[ -z "$(findstring _25,$@)" ] || \
1518                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1519                   $(XECHO) "SysClk = 25MHz" ; \
1520                 }
1521         @[ -z "$(findstring _33,$@)" ] || \
1522                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1523                   $(XECHO) "SysClk = 33MHz" ; \
1524                 }
1525         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1526
1527 quad100hd_config:       unconfig
1528         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1529
1530 redwood_config: unconfig
1531         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1532
1533 sbc405_config:  unconfig
1534         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1535
1536 sc3_config:unconfig
1537         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1538
1539 sequoia_config \
1540 rainier_config: unconfig
1541         @mkdir -p $(obj)include
1542         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1543                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1544         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1545
1546 sequoia_nand_config \
1547 rainier_nand_config: unconfig
1548         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1549         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1550         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1551         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1552                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1553         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1554         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1555         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1556
1557 sequoia_ramboot_config \
1558 rainier_ramboot_config: unconfig
1559         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1560         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1561         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1562                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1563         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1564         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1565         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1566                 $(obj)board/amcc/sequoia/config.tmp
1567
1568 taihu_config:   unconfig
1569         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1570
1571 taishan_config: unconfig
1572         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1573
1574 v5fx30teval_config: unconfig
1575         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1576         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1577         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1578                 > $(obj)board/avnet/v5fx30teval/config.tmp
1579         @echo "TEXT_BASE := 0x03000000" \
1580                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1581         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1582
1583 v5fx30teval_flash_config: unconfig
1584         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1585         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1586         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1587                 > $(obj)board/avnet/v5fx30teval/config.tmp
1588         @echo "TEXT_BASE := 0xFF1C0000" \
1589                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1590         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1591
1592 VOH405_config:  unconfig
1593         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1594
1595 VOM405_config:  unconfig
1596         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1597
1598 W7OLMC_config   \
1599 W7OLMG_config: unconfig
1600         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1601
1602 # Walnut & Sycamore images are identical (recognized via PVR)
1603 walnut_config \
1604 sycamore_config: unconfig
1605         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1606
1607 WUH405_config:  unconfig
1608         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1609
1610 xilinx-ppc405-generic_flash_config: unconfig
1611         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1612         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1613                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1614         @echo "TEXT_BASE := 0xFE360000" \
1615                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1616         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1617
1618 xilinx-ppc405-generic_config: unconfig
1619         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1620         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1621                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1622         @echo "TEXT_BASE := 0x04000000" \
1623                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1624         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1625
1626 xilinx-ppc440-generic_flash_config: unconfig
1627         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1628         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1629                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1630         @echo "TEXT_BASE := 0xFE360000" \
1631                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1632         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1633
1634 xilinx-ppc440-generic_config: unconfig
1635         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1636         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1637                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1638         @echo "TEXT_BASE := 0x04000000" \
1639                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1640         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1641
1642 XPEDITE1000_config:     unconfig
1643         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1644
1645 yosemite_config \
1646 yellowstone_config: unconfig
1647         @mkdir -p $(obj)include
1648         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1649                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1650         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1651
1652 yucca_config:   unconfig
1653         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1654
1655 zeus_config:    unconfig
1656         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1657
1658 #########################################################################
1659 ## MPC8220 Systems
1660 #########################################################################
1661
1662 Alaska8220_config       \
1663 Yukon8220_config:       unconfig
1664         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1665
1666 sorcery_config:         unconfig
1667         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1668
1669 #########################################################################
1670 ## MPC824x Systems
1671 #########################################################################
1672 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1673
1674 A3000_config: unconfig
1675         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1676
1677 barco_config: unconfig
1678         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1679
1680 BMW_config: unconfig
1681         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1682
1683 CPC45_config    \
1684 CPC45_ROMBOOT_config:   unconfig
1685         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1686         @cd $(obj)include ;                             \
1687         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1688                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1689                 $(XECHO) "... booting from 8-bit flash" ; \
1690         else \
1691                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1692                 $(XECHO) "... booting from 64-bit flash" ; \
1693         fi; \
1694         echo "export CONFIG_BOOT_ROM" >> config.mk;
1695
1696 CU824_config: unconfig
1697         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1698
1699 debris_config: unconfig
1700         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1701
1702 eXalion_config: unconfig
1703         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1704
1705 HIDDEN_DRAGON_config: unconfig
1706         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1707
1708 kvme080_config: unconfig
1709         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1710
1711 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1712 # time permits.
1713 #linkstation_HDLAN_config \
1714 # Remove this line when HDLAN is fixed
1715 linkstation_HGLAN_config: unconfig
1716         @mkdir -p $(obj)include
1717         @case $@ in \
1718                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1719                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1720         esac
1721         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1722
1723 MOUSSE_config: unconfig
1724         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1725
1726 MUSENKI_config: unconfig
1727         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1728
1729 MVBLUE_config:  unconfig
1730         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1731
1732 OXC_config: unconfig
1733         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1734
1735 PN62_config: unconfig
1736         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1737
1738 Sandpoint8240_config: unconfig
1739         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1740
1741 Sandpoint8245_config: unconfig
1742         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1743
1744 sbc8240_config: unconfig
1745         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1746
1747 SL8245_config: unconfig
1748         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1749
1750 utx8245_config: unconfig
1751         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1752
1753 #########################################################################
1754 ## MPC8260 Systems
1755 #########################################################################
1756
1757 atc_config:     unconfig
1758         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1759
1760 cogent_mpc8260_config:  unconfig
1761         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1762
1763 CPU86_config    \
1764 CPU86_ROMBOOT_config: unconfig
1765         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1766         @cd $(obj)include ;                             \
1767         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1768                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1769                 $(XECHO) "... booting from 8-bit flash" ; \
1770         else \
1771                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1772                 $(XECHO) "... booting from 64-bit flash" ; \
1773         fi; \
1774         echo "export CONFIG_BOOT_ROM" >> config.mk;
1775
1776 CPU87_config    \
1777 CPU87_ROMBOOT_config: unconfig
1778         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1779         @cd $(obj)include ;                             \
1780         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1781                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1782                 $(XECHO) "... booting from 8-bit flash" ; \
1783         else \
1784                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1785                 $(XECHO) "... booting from 64-bit flash" ; \
1786         fi; \
1787         echo "export CONFIG_BOOT_ROM" >> config.mk;
1788
1789 ep8248_config   \
1790 ep8248E_config  :       unconfig
1791         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1792
1793 ep8260_config:  unconfig
1794         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1795
1796 ep82xxm_config: unconfig
1797         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1798
1799 gw8260_config:  unconfig
1800         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1801
1802 hymod_config:   unconfig
1803         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1804
1805 IDS8247_config: unconfig
1806         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1807
1808 IPHASE4539_config:      unconfig
1809         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1810
1811 ISPAN_config            \
1812 ISPAN_REVB_config:      unconfig
1813         @mkdir -p $(obj)include
1814         @if [ "$(findstring _REVB_,$@)" ] ; then \
1815                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1816         fi
1817         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1818
1819 mgcoge_config   :       unconfig
1820         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1821
1822 MPC8260ADS_config       \
1823 MPC8260ADS_lowboot_config       \
1824 MPC8260ADS_33MHz_config \
1825 MPC8260ADS_33MHz_lowboot_config \
1826 MPC8260ADS_40MHz_config \
1827 MPC8260ADS_40MHz_lowboot_config \
1828 MPC8272ADS_config       \
1829 MPC8272ADS_lowboot_config       \
1830 PQ2FADS_config          \
1831 PQ2FADS_lowboot_config          \
1832 PQ2FADS-VR_config       \
1833 PQ2FADS-VR_lowboot_config       \
1834 PQ2FADS-ZU_config       \
1835 PQ2FADS-ZU_lowboot_config       \
1836 PQ2FADS-ZU_66MHz_config \
1837 PQ2FADS-ZU_66MHz_lowboot_config \
1838         :               unconfig
1839         @mkdir -p $(obj)include
1840         @mkdir -p $(obj)board/freescale/mpc8260ads
1841         $(if $(findstring PQ2FADS,$@), \
1842         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1843         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1844         $(if $(findstring MHz,$@), \
1845         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1846         $(if $(findstring VR,$@), \
1847         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1848         @[ -z "$(findstring lowboot_,$@)" ] || \
1849                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1850                   $(XECHO) "... with lowboot configuration" ; \
1851                 }
1852         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1853
1854 MPC8266ADS_config:      unconfig
1855         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1856
1857 muas3001_dev_config \
1858 muas3001_config :       unconfig
1859         @mkdir -p $(obj)include
1860         @mkdir -p $(obj)board/muas3001
1861         @if [ "$(findstring dev,$@)" ] ; then \
1862                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1863         fi
1864         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1865
1866 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1867 PM825_config    \
1868 PM825_ROMBOOT_config    \
1869 PM825_BIGFLASH_config   \
1870 PM825_ROMBOOT_BIGFLASH_config   \
1871 PM826_config    \
1872 PM826_ROMBOOT_config    \
1873 PM826_BIGFLASH_config   \
1874 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1875         @mkdir -p $(obj)include
1876         @mkdir -p $(obj)board/pm826
1877         @if [ "$(findstring PM825_,$@)" ] ; then \
1878                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1879         else \
1880                 >$(obj)include/config.h ; \
1881         fi
1882         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1883                 $(XECHO) "... booting from 8-bit flash" ; \
1884                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1885                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1886                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1887                         $(XECHO) "... with 32 MB Flash" ; \
1888                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1889                 fi; \
1890         else \
1891                 $(XECHO) "... booting from 64-bit flash" ; \
1892                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1893                         $(XECHO) "... with 32 MB Flash" ; \
1894                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1895                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1896                 else \
1897                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1898                 fi; \
1899         fi
1900         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1901
1902 PM828_config    \
1903 PM828_PCI_config        \
1904 PM828_ROMBOOT_config    \
1905 PM828_ROMBOOT_PCI_config:       unconfig
1906         @mkdir -p $(obj)include
1907         @mkdir -p $(obj)board/pm826
1908         @if [ "$(findstring _PCI_,$@)" ] ; then \
1909                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1910                 $(XECHO) "... with PCI enabled" ; \
1911         fi
1912         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1913                 $(XECHO) "... booting from 8-bit flash" ; \
1914                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1915                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1916         fi
1917         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1918
1919 ppmc8260_config:        unconfig
1920         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1921
1922 Rattler8248_config      \
1923 Rattler_config:         unconfig
1924         @mkdir -p $(obj)include
1925         $(if $(findstring 8248,$@), \
1926         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1927         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1928
1929 RPXsuper_config:        unconfig
1930         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1931
1932 rsdproto_config:        unconfig
1933         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1934
1935 sacsng_config:  unconfig
1936         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1937
1938 sbc8260_config: unconfig
1939         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1940
1941 SCM_config:             unconfig
1942         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1943
1944 TQM8255_AA_config \
1945 TQM8260_AA_config \
1946 TQM8260_AB_config \
1947 TQM8260_AC_config \
1948 TQM8260_AD_config \
1949 TQM8260_AE_config \
1950 TQM8260_AF_config \
1951 TQM8260_AG_config \
1952 TQM8260_AH_config \
1953 TQM8260_AI_config \
1954 TQM8265_AA_config:  unconfig
1955         @mkdir -p $(obj)include
1956         @case "$@" in \
1957         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1958         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1959         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1960         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1961         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1962         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1963         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1964         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1965         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1966         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1967         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1968         esac; \
1969         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1970                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1971         fi; \
1972         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1973         echo "... with $${CFREQ}MHz system clock" ; \
1974         if [ "$${CACHE}" = "yes" ] ; then \
1975                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1976                 $(XECHO) "... with L2 Cache support" ; \
1977         else \
1978                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
1979                 $(XECHO) "... without L2 Cache support" ; \
1980         fi; \
1981         if [ "$${BMODE}" = "60x" ] ; then \
1982                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
1983                 $(XECHO) "... with 60x Bus Mode" ; \
1984         else \
1985                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
1986                 $(XECHO) "... without 60x Bus Mode" ; \
1987         fi
1988         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
1989
1990 TQM8272_config: unconfig
1991         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
1992
1993 VoVPN-GW_66MHz_config   \
1994 VoVPN-GW_100MHz_config:         unconfig
1995         @mkdir -p $(obj)include
1996         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
1997         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
1998
1999 ZPC1900_config: unconfig
2000         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
2001
2002 #########################################################################
2003 ## Coldfire
2004 #########################################################################
2005
2006 M5208EVBE_config :              unconfig
2007         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
2008
2009 M52277EVB_config \
2010 M52277EVB_spansion_config \
2011 M52277EVB_stmicro_config :      unconfig
2012         @case "$@" in \
2013         M52277EVB_config)               FLASH=SPANSION;; \
2014         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2015         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2016         esac; \
2017         if [ "$${FLASH}" = "SPANSION" ] ; then \
2018                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2019                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2020                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2021                 $(XECHO) "... with SPANSION boot..." ; \
2022         fi; \
2023         if [ "$${FLASH}" = "STMICRO" ] ; then \
2024                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2025                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2026                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2027                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2028                 $(XECHO) "... with ST Micro boot..." ; \
2029         fi
2030         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2031
2032 M5235EVB_config \
2033 M5235EVB_Flash16_config \
2034 M5235EVB_Flash32_config:        unconfig
2035         @case "$@" in \
2036         M5235EVB_config)                FLASH=16;; \
2037         M5235EVB_Flash16_config)        FLASH=16;; \
2038         M5235EVB_Flash32_config)        FLASH=32;; \
2039         esac; \
2040         if [ "$${FLASH}" != "16" ] ; then \
2041                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2042                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2043                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2044         else \
2045                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2046                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2047         fi
2048         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2049
2050 M5249EVB_config :               unconfig
2051         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2052
2053 M5253DEMO_config :              unconfig
2054         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2055
2056 M5253EVBE_config :              unconfig
2057         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2058
2059 cobra5272_config :              unconfig
2060         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2061
2062 EB+MCF-EV123_config :           unconfig
2063         @mkdir -p $(obj)include
2064         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2065         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2066         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2067
2068 EB+MCF-EV123_internal_config :  unconfig
2069         @mkdir -p $(obj)include
2070         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2071         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2072         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2073
2074 idmr_config :                   unconfig
2075         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2076
2077 M5271EVB_config :               unconfig
2078         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2079
2080 M5272C3_config :                unconfig
2081         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2082
2083 M5275EVB_config :               unconfig
2084         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2085
2086 M5282EVB_config :               unconfig
2087         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2088
2089 M53017EVB_config :              unconfig
2090         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2091
2092 M5329AFEE_config \
2093 M5329BFEE_config :      unconfig
2094         @case "$@" in \
2095         M5329AFEE_config)       NAND=0;; \
2096         M5329BFEE_config)       NAND=16;; \
2097         esac; \
2098         if [ "$${NAND}" != "0" ] ; then \
2099                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2100         fi
2101         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2102
2103 M5373EVB_config :       unconfig
2104         @case "$@" in \
2105         M5373EVB_config)        NAND=16;; \
2106         esac; \
2107         if [ "$${NAND}" != "0" ] ; then \
2108                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2109         fi
2110         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2111
2112 M54451EVB_config \
2113 M54451EVB_stmicro_config :      unconfig
2114         @case "$@" in \
2115         M54451EVB_config)               FLASH=NOR;; \
2116         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2117         esac; \
2118         if [ "$${FLASH}" = "NOR" ] ; then \
2119                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2120                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2121                 $(XECHO) "... with NOR boot..." ; \
2122         fi; \
2123         if [ "$${FLASH}" = "STMICRO" ] ; then \
2124                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2125                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2126                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2127                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2128                 $(XECHO) "... with ST Micro boot..." ; \
2129         fi; \
2130         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2131         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2132
2133 M54455EVB_config \
2134 M54455EVB_atmel_config \
2135 M54455EVB_intel_config \
2136 M54455EVB_a33_config \
2137 M54455EVB_a66_config \
2138 M54455EVB_i33_config \
2139 M54455EVB_i66_config \
2140 M54455EVB_stm33_config :        unconfig
2141         @case "$@" in \
2142         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2143         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2144         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2145         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2146         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2147         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2148         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2149         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2150         esac; \
2151         if [ "$${FLASH}" = "INTEL" ] ; then \
2152                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2153                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2154                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2155                 $(XECHO) "... with INTEL boot..." ; \
2156         fi; \
2157         if [ "$${FLASH}" = "ATMEL" ] ; then \
2158                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2159                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2160                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2161                 $(XECHO) "... with ATMEL boot..." ; \
2162         fi; \
2163         if [ "$${FLASH}" = "STMICRO" ] ; then \
2164                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2165                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2166                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2167                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2168                 $(XECHO) "... with ST Micro boot..." ; \
2169         fi; \
2170         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2171         $(XECHO) "... with $${FREQ}Hz input clock"
2172         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2173
2174 M5475AFE_config \
2175 M5475BFE_config \
2176 M5475CFE_config \
2177 M5475DFE_config \
2178 M5475EFE_config \
2179 M5475FFE_config \
2180 M5475GFE_config :       unconfig
2181         @case "$@" in \
2182         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2183         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2184         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2185         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2186         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2187         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2188         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2189         esac; \
2190         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2191         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2192         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2193         if [ "$${RAM1}" != "0" ] ; then \
2194                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2195         fi; \
2196         if [ "$${CODE}" != "0" ] ; then \
2197                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2198         fi; \
2199         if [ "$${VID}" == "1" ] ; then \
2200                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2201         fi; \
2202         if [ "$${USB}" == "1" ] ; then \
2203                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2204         fi
2205         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2206
2207 M5485AFE_config \
2208 M5485BFE_config \
2209 M5485CFE_config \
2210 M5485DFE_config \
2211 M5485EFE_config \
2212 M5485FFE_config \
2213 M5485GFE_config \
2214 M5485HFE_config :       unconfig
2215         @case "$@" in \
2216         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2217         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2218         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2219         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2220         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2221         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2222         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2223         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2224         esac; \
2225         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2226         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2227         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2228         if [ "$${RAM1}" != "0" ] ; then \
2229                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2230         fi; \
2231         if [ "$${CODE}" != "0" ] ; then \
2232                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2233         fi; \
2234         if [ "$${VID}" == "1" ] ; then \
2235                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2236         fi; \
2237         if [ "$${USB}" == "1" ] ; then \
2238                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2239         fi
2240         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2241
2242 TASREG_config :         unconfig
2243         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2244
2245 #########################################################################
2246 ## MPC83xx Systems
2247 #########################################################################
2248
2249 kmeter1_config: unconfig
2250         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2251
2252 MPC8313ERDB_33_config \
2253 MPC8313ERDB_66_config \
2254 MPC8313ERDB_NAND_33_config \
2255 MPC8313ERDB_NAND_66_config: unconfig
2256         @mkdir -p $(obj)include
2257         @mkdir -p $(obj)board/freescale/mpc8313erdb
2258         @if [ "$(findstring _33_,$@)" ] ; then \
2259                 $(XECHO) -n "...33M ..." ; \
2260                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2261         fi ; \
2262         if [ "$(findstring _66_,$@)" ] ; then \
2263                 $(XECHO) -n "...66M..." ; \
2264                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2265         fi ; \
2266         if [ "$(findstring _NAND_,$@)" ] ; then \
2267                 $(XECHO) -n "...NAND..." ; \
2268                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2269                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2270         fi ;
2271         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2272         @if [ "$(findstring _NAND_,$@)" ] ; then \
2273                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2274         fi ;
2275
2276 MPC8315ERDB_NAND_config \
2277 MPC8315ERDB_config: unconfig
2278         @if [ "$(findstring _NAND_,$@)" ] ; then \
2279                 ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
2280         fi ;
2281         @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2282
2283 MPC8323ERDB_config:     unconfig
2284         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2285
2286 MPC832XEMDS_config \
2287 MPC832XEMDS_HOST_33_config \
2288 MPC832XEMDS_HOST_66_config \
2289 MPC832XEMDS_SLAVE_config \
2290 MPC832XEMDS_ATM_config: unconfig
2291         @mkdir -p $(obj)include
2292         @if [ "$(findstring _HOST_,$@)" ] ; then \
2293                 $(XECHO) -n "... PCI HOST " ; \
2294                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2295         fi ; \
2296         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2297                 $(XECHO) "...PCI SLAVE 66M"  ; \
2298                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2299                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2300         fi ; \
2301         if [ "$(findstring _33_,$@)" ] ; then \
2302                 $(XECHO) -n "...33M ..." ; \
2303                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2304                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2305         fi ; \
2306         if [ "$(findstring _66_,$@)" ] ; then \
2307                 $(XECHO) -n "...66M..." ; \
2308                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2309                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2310         fi ; \
2311         if [ "$(findstring _ATM_,$@)" ] ; then \
2312                 $(XECHO) -n "...ATM..." ; \
2313                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2314                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2315         fi ;
2316         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2317
2318 MPC8349EMDS_config:     unconfig
2319         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2320
2321 MPC8349ITX_config \
2322 MPC8349ITX_LOWBOOT_config \
2323 MPC8349ITXGP_config:    unconfig
2324         @mkdir -p $(obj)include
2325         @mkdir -p $(obj)board/freescale/mpc8349itx
2326         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2327         @if [ "$(findstring GP,$@)" ] ; then \
2328                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2329         fi
2330         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2331                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2332         fi
2333         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2334
2335 MPC8360EMDS_config \
2336 MPC8360EMDS_HOST_33_config \
2337 MPC8360EMDS_HOST_66_config \
2338 MPC8360EMDS_SLAVE_config \
2339 MPC8360EMDS_ATM_config: unconfig
2340         @mkdir -p $(obj)include
2341         @if [ "$(findstring _HOST_,$@)" ] ; then \
2342                 $(XECHO) -n "... PCI HOST " ; \
2343                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2344         fi ; \
2345         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2346                 $(XECHO) "...PCI SLAVE 66M"  ; \
2347                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2348                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2349         fi ; \
2350         if [ "$(findstring _33_,$@)" ] ; then \
2351                 $(XECHO) -n "...33M ..." ; \
2352                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2353                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2354         fi ; \
2355         if [ "$(findstring _66_,$@)" ] ; then \
2356                 $(XECHO) -n "...66M..." ; \
2357                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2358                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2359         fi ; \
2360         if [ "$(findstring _ATM_,$@)" ] ; then \
2361                 $(XECHO) -n "...ATM..." ; \
2362                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2363                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2364         fi ;
2365         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2366
2367 MPC8360ERDK_33_config \
2368 MPC8360ERDK_66_config \
2369 MPC8360ERDK_config:     unconfig
2370         @mkdir -p $(obj)include
2371         @if [ "$(findstring _33_,$@)" ] ; then \
2372                 $(XECHO) -n "... CLKIN 33MHz " ; \
2373                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2374         fi ;
2375         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2376
2377 MPC837XEMDS_config \
2378 MPC837XEMDS_HOST_config:        unconfig
2379         @mkdir -p $(obj)include
2380         @if [ "$(findstring _HOST_,$@)" ] ; then \
2381                 $(XECHO) -n "... PCI HOST " ; \
2382                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2383         fi ;
2384         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2385
2386 MPC837XERDB_config:     unconfig
2387         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2388
2389 MVBLM7_config: unconfig
2390         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2391
2392 sbc8349_config \
2393 sbc8349_PCI_33_config \
2394 sbc8349_PCI_66_config: unconfig
2395         @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
2396
2397 SIMPC8313_LP_config \
2398 SIMPC8313_SP_config: unconfig
2399         @mkdir -p $(obj)include
2400         @mkdir -p $(obj)board/sheldon/simpc8313
2401         @if [ "$(findstring _LP_,$@)" ] ; then \
2402                 $(XECHO) -n "...Large Page NAND..." ; \
2403                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2404         fi ; \
2405         if [ "$(findstring _SP_,$@)" ] ; then \
2406                 $(XECHO) -n "...Small Page NAND..." ; \
2407                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2408         fi ;
2409         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2410         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2411
2412 TQM834x_config: unconfig
2413         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2414
2415 caddy2_config \
2416 vme8349_config:         unconfig
2417         @$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
2418
2419 #########################################################################
2420 ## MPC85xx Systems
2421 #########################################################################
2422
2423 ATUM8548_config:        unconfig
2424         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2425
2426 MPC8536DS_NAND_config \
2427 MPC8536DS_SDCARD_config \
2428 MPC8536DS_SPIFLASH_config \
2429 MPC8536DS_36BIT_config \
2430 MPC8536DS_config:       unconfig
2431         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2432
2433 MPC8540ADS_config:      unconfig
2434         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2435
2436 MPC8540EVAL_config \
2437 MPC8540EVAL_33_config \
2438 MPC8540EVAL_66_config \
2439 MPC8540EVAL_33_slave_config \
2440 MPC8540EVAL_66_slave_config:      unconfig
2441         @mkdir -p $(obj)include
2442         @if [ "$(findstring _33_,$@)" ] ; then \
2443                 $(XECHO) "... 33 MHz PCI" ; \
2444         else \
2445                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2446                 $(XECHO) "... 66 MHz PCI" ; \
2447         fi ; \
2448         if [ "$(findstring _slave_,$@)" ] ; then \
2449                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2450                 $(XECHO) " slave" ; \
2451         else \
2452                 $(XECHO) " host" ; \
2453         fi
2454         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2455
2456 MPC8560ADS_config:      unconfig
2457         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2458
2459 MPC8541CDS_legacy_config \
2460 MPC8541CDS_config:      unconfig
2461         @mkdir -p $(obj)include
2462         @if [ "$(findstring _legacy_,$@)" ] ; then \
2463                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2464                 $(XECHO) "... legacy" ; \
2465         fi
2466         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2467
2468 MPC8544DS_config:       unconfig
2469         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2470
2471 MPC8548CDS_legacy_config \
2472 MPC8548CDS_config:      unconfig
2473         @mkdir -p $(obj)include
2474         @if [ "$(findstring _legacy_,$@)" ] ; then \
2475                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2476                 $(XECHO) "... legacy" ; \
2477         fi
2478         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2479
2480 MPC8555CDS_legacy_config \
2481 MPC8555CDS_config:      unconfig
2482         @mkdir -p $(obj)include
2483         @if [ "$(findstring _legacy_,$@)" ] ; then \
2484                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2485                 $(XECHO) "... legacy" ; \
2486         fi
2487         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2488
2489 MPC8568MDS_config:      unconfig
2490         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2491
2492 MPC8569MDS_ATM_config \
2493 MPC8569MDS_NAND_config \
2494 MPC8569MDS_config:      unconfig
2495         @$(MKCONFIG) -t $(@:_config=) MPC8569MDS ppc mpc85xx mpc8569mds freescale
2496
2497 MPC8572DS_36BIT_config \
2498 MPC8572DS_config:       unconfig
2499         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2500
2501 P2020DS_36BIT_config \
2502 P2020DS_config:         unconfig
2503         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2504
2505 P1011RDB_config \
2506 P1011RDB_NAND_config \
2507 P1011RDB_SDCARD_config \
2508 P1011RDB_SPIFLASH_config \
2509 P1020RDB_config \
2510 P1020RDB_NAND_config \
2511 P1020RDB_SDCARD_config \
2512 P1020RDB_SPIFLASH_config \
2513 P2010RDB_config \
2514 P2010RDB_NAND_config \
2515 P2010RDB_SDCARD_config \
2516 P2010RDB_SPIFLASH_config \
2517 P2020RDB_config \
2518 P2020RDB_NAND_config \
2519 P2020RDB_SDCARD_config \
2520 P2020RDB_SPIFLASH_config:       unconfig
2521         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2522
2523 PM854_config:   unconfig
2524         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2525
2526 PM856_config:   unconfig
2527         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2528
2529 sbc8540_config \
2530 sbc8540_33_config \
2531 sbc8540_66_config:      unconfig
2532         @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
2533
2534 sbc8548_config \
2535 sbc8548_PCI_33_config \
2536 sbc8548_PCI_66_config \
2537 sbc8548_PCI_33_PCIE_config \
2538 sbc8548_PCI_66_PCIE_config: unconfig
2539         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2540
2541 sbc8560_config \
2542 sbc8560_33_config \
2543 sbc8560_66_config:      unconfig
2544         @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
2545
2546 socrates_config:        unconfig
2547         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2548
2549 stxgp3_config:          unconfig
2550         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2551
2552 stxssa_config           \
2553 stxssa_4M_config:       unconfig
2554         @mkdir -p $(obj)include
2555         @if [ "$(findstring _4M_,$@)" ] ; then \
2556                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2557                 $(XECHO) "... with 4 MiB flash memory" ; \
2558         fi
2559         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2560
2561 TQM8540_config          \
2562 TQM8541_config          \
2563 TQM8548_config          \
2564 TQM8548_AG_config       \
2565 TQM8548_BE_config       \
2566 TQM8555_config          \
2567 TQM8560_config:         unconfig
2568         @mkdir -p $(obj)include
2569         @BTYPE=$(@:_config=); \
2570         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2571         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2572         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2573         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2574         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2575         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2576         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2577         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2578
2579 XPEDITE5200_config:     unconfig
2580         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2581
2582 XPEDITE5370_config:     unconfig
2583         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2584
2585 #########################################################################
2586 ## MPC86xx Systems
2587 #########################################################################
2588
2589 MPC8610HPCD_config:     unconfig
2590         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2591
2592 MPC8641HPCN_36BIT_config \
2593 MPC8641HPCN_config:    unconfig
2594         @mkdir -p $(obj)include
2595         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2596                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2597                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2598         fi
2599         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2600
2601 sbc8641d_config:        unconfig
2602         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2603
2604 XPEDITE5170_config:     unconfig
2605         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2606
2607 #########################################################################
2608 ## 74xx/7xx Systems
2609 #########################################################################
2610
2611 AmigaOneG3SE_config:    unconfig
2612         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2613
2614 BAB7xx_config: unconfig
2615         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2616
2617 CPCI750_config: unconfig
2618         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2619
2620 DB64360_config: unconfig
2621         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2622
2623 DB64460_config: unconfig
2624         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2625
2626 ELPPC_config: unconfig
2627         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2628
2629 EVB64260_config \
2630 EVB64260_750CX_config:  unconfig
2631         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2632
2633 mpc7448hpc2_config:  unconfig
2634         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2635
2636 P3G4_config: unconfig
2637         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2638
2639 p3m750_config   \
2640 p3m7448_config:         unconfig
2641         @mkdir -p $(obj)include
2642         @if [ "$(findstring 750_,$@)" ] ; then \
2643                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2644         else \
2645                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2646         fi
2647         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2648
2649 PCIPPC2_config \
2650 PCIPPC6_config: unconfig
2651         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2652
2653 ppmc7xx_config: unconfig
2654         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2655
2656 ZUMA_config:    unconfig
2657         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2658
2659 #========================================================================
2660 # ARM
2661 #========================================================================
2662 #########################################################################
2663 ## StrongARM Systems
2664 #########################################################################
2665
2666 assabet_config  :       unconfig
2667         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2668
2669 dnp1110_config  :       unconfig
2670         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2671
2672 gcplus_config   :       unconfig
2673         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2674
2675 lart_config     :       unconfig
2676         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2677
2678 shannon_config  :       unconfig
2679         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2680
2681 #########################################################################
2682 ## ARM92xT Systems
2683 #########################################################################
2684
2685 a320evb_config  :       unconfig
2686         @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
2687
2688 #########################################################################
2689 ## Atmel AT91RM9200 Systems
2690 #########################################################################
2691
2692 at91rm9200dk_config     :       unconfig
2693         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2694
2695 at91rm9200ek_config     :       unconfig
2696         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2697
2698 cmc_pu2_config  :       unconfig
2699         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2700
2701 CPUAT91_RAM_config \
2702 CPUAT91_config  :       unconfig
2703         @mkdir -p $(obj)include
2704         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2705         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2706
2707 csb637_config   :       unconfig
2708         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2709
2710 kb9202_config   :       unconfig
2711         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2712
2713 m501sk_config   :       unconfig
2714         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2715
2716 mp2usb_config   :       unconfig
2717         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2718
2719 #########################################################################
2720 ## ARM926EJ-S Systems
2721 #########################################################################
2722
2723 afeb9260_config:        unconfig
2724         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2725
2726 at91cap9adk_config      :       unconfig
2727         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2728
2729 at91sam9260ek_nandflash_config \
2730 at91sam9260ek_dataflash_cs0_config \
2731 at91sam9260ek_dataflash_cs1_config \
2732 at91sam9260ek_config \
2733 at91sam9g20ek_nandflash_config \
2734 at91sam9g20ek_dataflash_cs0_config \
2735 at91sam9g20ek_dataflash_cs1_config \
2736 at91sam9g20ek_config    :       unconfig
2737         @mkdir -p $(obj)include
2738         @if [ "$(findstring 9g20,$@)" ] ; then \
2739                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2740                 $(XECHO) "... 9G20 Variant" ; \
2741         else \
2742                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2743         fi;
2744         @if [ "$(findstring _nandflash,$@)" ] ; then \
2745                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2746                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2747         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2748                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2749                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2750         else \
2751                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2752                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2753         fi;
2754         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2755
2756 at91sam9xeek_nandflash_config \
2757 at91sam9xeek_dataflash_cs0_config \
2758 at91sam9xeek_dataflash_cs1_config \
2759 at91sam9xeek_config     :       unconfig
2760         @mkdir -p $(obj)include
2761         @if [ "$(findstring _nandflash,$@)" ] ; then \
2762                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2763                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2764         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2765                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2766                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2767         else \
2768                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2769                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2770         fi;
2771         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2772
2773 at91sam9261ek_nandflash_config \
2774 at91sam9261ek_dataflash_cs0_config \
2775 at91sam9261ek_dataflash_cs3_config \
2776 at91sam9261ek_config \
2777 at91sam9g10ek_nandflash_config \
2778 at91sam9g10ek_dataflash_cs0_config \
2779 at91sam9g10ek_dataflash_cs3_config \
2780 at91sam9g10ek_config    :       unconfig
2781         @mkdir -p $(obj)include
2782         @if [ "$(findstring 9g10,$@)" ] ; then \
2783                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2784                 $(XECHO) "... 9G10 Variant" ; \
2785         else \
2786                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2787         fi;
2788         @if [ "$(findstring _nandflash,$@)" ] ; then \
2789                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2790                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2791         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2792                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2793                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2794         else \
2795                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2796                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2797         fi;
2798         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2799
2800 at91sam9263ek_norflash_config \
2801 at91sam9263ek_norflash_boot_config \
2802 at91sam9263ek_nandflash_config \
2803 at91sam9263ek_dataflash_config \
2804 at91sam9263ek_dataflash_cs0_config \
2805 at91sam9263ek_config    :       unconfig
2806         @mkdir -p $(obj)include
2807         @if [ "$(findstring _nandflash,$@)" ] ; then \
2808                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2809                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2810         elif [ "$(findstring norflash,$@)" ] ; then \
2811                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2812                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2813         else \
2814                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2815                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2816         fi;
2817         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2818                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2819                 $(XECHO) "... and boot from NOR FLASH" ; \
2820         fi;
2821         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2822
2823 at91sam9rlek_nandflash_config \
2824 at91sam9rlek_dataflash_config \
2825 at91sam9rlek_dataflash_cs0_config \
2826 at91sam9rlek_config     :       unconfig
2827         @mkdir -p $(obj)include
2828         @if [ "$(findstring _nandflash,$@)" ] ; then \
2829                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2830                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2831         else \
2832                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2833                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2834         fi;
2835         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2836
2837 CPU9G20_128M_config \
2838 CPU9G20_config \
2839 CPU9260_128M_config \
2840 CPU9260_config  :       unconfig
2841         @mkdir -p $(obj)include
2842         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2843         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2844
2845 meesc_config    :       unconfig
2846         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2847
2848 pm9261_config   :       unconfig
2849         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2850
2851 at91sam9m10g45ek_nandflash_config \
2852 at91sam9m10g45ek_dataflash_config \
2853 at91sam9m10g45ek_dataflash_cs0_config \
2854 at91sam9m10g45ek_config \
2855 at91sam9g45ekes_nandflash_config \
2856 at91sam9g45ekes_dataflash_config \
2857 at91sam9g45ekes_dataflash_cs0_config \
2858 at91sam9g45ekes_config  :       unconfig
2859         @mkdir -p $(obj)include
2860                 @if [ "$(findstring 9m10,$@)" ] ; then \
2861                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2862                 $(XECHO) "... 9M10G45 Variant" ; \
2863         else \
2864                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2865         fi;
2866
2867         @if [ "$(findstring _nandflash,$@)" ] ; then \
2868                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2869                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2870         else \
2871                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2872                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2873         fi;
2874         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2875
2876 pm9263_config   :       unconfig
2877         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2878
2879 SBC35_A9G20_NANDFLASH_config \
2880 SBC35_A9G20_EEPROM_config \
2881 SBC35_A9G20_config      :       unconfig
2882         @mkdir -p $(obj)include
2883         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2884         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2885
2886 TNY_A9G20_NANDFLASH_config \
2887 TNY_A9G20_EEPROM_config \
2888 TNY_A9G20_config \
2889 TNY_A9260_NANDFLASH_config \
2890 TNY_A9260_EEPROM_config \
2891 TNY_A9260_config        :       unconfig
2892         @mkdir -p $(obj)include
2893         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2894         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2895
2896 ########################################################################
2897 ## ARM Integrator boards - see doc/README-integrator for more info.
2898 integratorap_config     \
2899 ap_config               \
2900 ap966_config            \
2901 ap922_config            \
2902 ap922_XA10_config       \
2903 ap7_config              \
2904 ap720t_config           \
2905 ap920t_config           \
2906 ap926ejs_config         \
2907 ap946es_config: unconfig
2908         @board/armltd/integrator/split_by_variant.sh ap $@
2909
2910 integratorcp_config     \
2911 cp_config               \
2912 cp920t_config           \
2913 cp926ejs_config         \
2914 cp946es_config          \
2915 cp1136_config           \
2916 cp966_config            \
2917 cp922_config            \
2918 cp922_XA10_config       \
2919 cp1026_config: unconfig
2920         @board/armltd/integrator/split_by_variant.sh cp $@
2921
2922 da830evm_config:        unconfig
2923         @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
2924
2925 davinci_dvevm_config :  unconfig
2926         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2927
2928 davinci_schmoogie_config :      unconfig
2929         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2930
2931 davinci_sffsdr_config : unconfig
2932         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2933
2934 davinci_sonata_config : unconfig
2935         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2936
2937 davinci_dm355evm_config :       unconfig
2938         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2939
2940 davinci_dm355leopard_config :   unconfig
2941         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2942
2943 davinci_dm365evm_config :       unconfig
2944         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2945
2946 davinci_dm6467evm_config :      unconfig
2947         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2948
2949 imx27lite_config:       unconfig
2950         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2951
2952 lpd7a400_config \
2953 lpd7a404_config:        unconfig
2954         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2955
2956 mv88f6281gtw_ge_config: unconfig
2957         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2958
2959 mx1ads_config   :       unconfig
2960         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2961
2962 mx1fs2_config   :       unconfig
2963         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2964
2965 netstar_config:         unconfig
2966         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2967
2968 nhk8815_config \
2969 nhk8815_onenand_config: unconfig
2970         @mkdir -p $(obj)include
2971         @ > $(obj)include/config.h
2972         @if [ "$(findstring _onenand, $@)" ] ; then \
2973                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2974                 $(XECHO) "... configured to boot from OneNand Flash"; \
2975         else \
2976                 $(XECHO) "... configured to boot from Nand Flash"; \
2977         fi
2978         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2979
2980 omap1510inn_config :    unconfig
2981         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2982
2983 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2984
2985 omap1610inn_config \
2986 omap1610inn_cs0boot_config \
2987 omap1610inn_cs3boot_config \
2988 omap1610inn_cs_autoboot_config \
2989 omap1610h2_config \
2990 omap1610h2_cs0boot_config \
2991 omap1610h2_cs3boot_config \
2992 omap1610h2_cs_autoboot_config:  unconfig
2993         @mkdir -p $(obj)include
2994         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
2995                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
2996                 $(XECHO) "... configured for CS0 boot"; \
2997         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
2998                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
2999                 $(XECHO) "... configured for CS_AUTO boot"; \
3000         else \
3001                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3002                 $(XECHO) "... configured for CS3 boot"; \
3003         fi;
3004         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
3005
3006 omap5912osk_config :    unconfig
3007         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
3008
3009 openrd_base_config: unconfig
3010         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3011
3012 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3013
3014 omap730p2_config \
3015 omap730p2_cs0boot_config \
3016 omap730p2_cs3boot_config :      unconfig
3017         @mkdir -p $(obj)include
3018         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3019                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3020                 $(XECHO) "... configured for CS0 boot"; \
3021         else \
3022                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3023                 $(XECHO) "... configured for CS3 boot"; \
3024         fi;
3025         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3026
3027 rd6281a_config: unconfig
3028         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3029
3030 sbc2410x_config: unconfig
3031         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3032
3033 scb9328_config  :       unconfig
3034         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3035
3036 sheevaplug_config: unconfig
3037         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3038
3039 smdk2400_config :       unconfig
3040         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3041
3042 smdk2410_config :       unconfig
3043         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3044
3045 spear300_config \
3046 spear310_config \
3047 spear320_config :       unconfig
3048         @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear
3049
3050 spear600_config :       unconfig
3051         @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear
3052
3053 SX1_stdout_serial_config \
3054 SX1_config:             unconfig
3055         @mkdir -p $(obj)include
3056         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3057                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3058                 $(XECHO) "... configured for stdout serial"; \
3059         else \
3060                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3061                 $(XECHO) "... configured for stdout usbtty"; \
3062         fi;
3063         @$(MKCONFIG) SX1 arm arm925t sx1
3064
3065 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3066 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3067
3068 trab_config \
3069 trab_bigram_config \
3070 trab_bigflash_config \
3071 trab_old_config:        unconfig
3072         @mkdir -p $(obj)include
3073         @mkdir -p $(obj)board/trab
3074         @[ -z "$(findstring _bigram,$@)" ] || \
3075                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3076                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3077                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3078                 }
3079         @[ -z "$(findstring _bigflash,$@)" ] || \
3080                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3081                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3082                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3083                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3084                 }
3085         @[ -z "$(findstring _old,$@)" ] || \
3086                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3087                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3088                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3089                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3090                 }
3091         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3092
3093 VCMA9_config    :       unconfig
3094         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3095
3096 #########################################################################
3097 # ARM supplied Versatile development boards
3098 #########################################################################
3099
3100 cm4008_config   :       unconfig
3101         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3102
3103 cm41xx_config   :       unconfig
3104         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3105
3106 versatile_config        \
3107 versatileab_config      \
3108 versatilepb_config :    unconfig
3109         @board/armltd/versatile/split_by_variant.sh $@
3110
3111 voiceblue_config:       unconfig
3112         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3113
3114 #########################################################################
3115 ## S3C44B0 Systems
3116 #########################################################################
3117
3118 B2_config       :       unconfig
3119         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3120
3121 #########################################################################
3122 ## ARM720T Systems
3123 #########################################################################
3124
3125 armadillo_config:       unconfig
3126         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3127
3128 ep7312_config   :       unconfig
3129         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3130
3131 impa7_config    :       unconfig
3132         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3133
3134 modnet50_config :       unconfig
3135         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3136
3137 evb4510_config :        unconfig
3138         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3139
3140 lpc2292sodimm_config:   unconfig
3141         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3142
3143 SMN42_config    :       unconfig
3144         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3145
3146 #########################################################################
3147 ## ARM CORTEX Systems
3148 #########################################################################
3149
3150 devkit8000_config :     unconfig
3151         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3152
3153 omap3_beagle_config :   unconfig
3154         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3155
3156 omap3_overo_config :    unconfig
3157         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3158
3159 omap3_evm_config :      unconfig
3160         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3161
3162 omap3_pandora_config :  unconfig
3163         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3164
3165 omap3_sdp3430_config :  unconfig
3166         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3167
3168 omap3_zoom1_config :    unconfig
3169         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3170
3171 omap3_zoom2_config :    unconfig
3172         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3173
3174 smdkc100_config:        unconfig
3175         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3176
3177 #########################################################################
3178 ## XScale Systems
3179 #########################################################################
3180
3181 actux1_config   :       unconfig
3182         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3183
3184 actux2_config   :       unconfig
3185         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3186
3187 actux3_config   :       unconfig
3188         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3189
3190 actux4_config   :       unconfig
3191         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3192
3193 cerf250_config :        unconfig
3194         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3195
3196 cradle_config   :       unconfig
3197         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3198
3199 csb226_config   :       unconfig
3200         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3201
3202 delta_config :  unconfig
3203         @$(MKCONFIG) $(@:_config=) arm pxa delta
3204
3205 innokom_config  :       unconfig
3206         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3207
3208 ixdp425_config  :       unconfig
3209         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3210
3211 ixdpg425_config :       unconfig
3212         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3213
3214 lubbock_config  :       unconfig
3215         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3216
3217 pleb2_config    :       unconfig
3218         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3219
3220 logodl_config   :       unconfig
3221         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3222
3223 pdnb3_config \
3224 scpu_config:    unconfig
3225         @mkdir -p $(obj)include
3226         @if [ "$(findstring scpu_,$@)" ] ; then \
3227                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3228                 $(XECHO) "... on SCPU board variant" ; \
3229         fi
3230         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3231
3232 pxa255_idp_config:      unconfig
3233         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3234
3235 polaris_config \
3236 trizepsiv_config        :       unconfig
3237         @mkdir -p $(obj)include
3238         @if [ "$(findstring polaris,$@)" ] ; then \
3239                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3240         fi;
3241         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3242
3243 wepep250_config :       unconfig
3244         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3245
3246 xaeniax_config  :       unconfig
3247         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3248
3249 xm250_config    :       unconfig
3250         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3251
3252 xsengine_config :       unconfig
3253         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3254
3255 zylonite_config :
3256         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3257
3258 #########################################################################
3259 ## ARM1136 Systems
3260 #########################################################################
3261
3262 apollon_config          : unconfig
3263         @mkdir -p $(obj)include
3264         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3265         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3266         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3267
3268 imx31_litekit_config    : unconfig
3269         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3270
3271 imx31_phycore_eet_config \
3272 imx31_phycore_config    : unconfig
3273         @mkdir -p $(obj)include
3274         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3275                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3276         fi
3277         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3278
3279 mx31ads_config          : unconfig
3280         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3281
3282 mx31pdk_config \
3283 mx31pdk_nand_config     : unconfig
3284         @mkdir -p $(obj)include
3285         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3286                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3287         else                                                                            \
3288                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3289                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3290         fi
3291         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3292
3293 omap2420h4_config       : unconfig
3294         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3295
3296 qong_config             : unconfig
3297         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3298
3299 #########################################################################
3300 ## ARM1176 Systems
3301 #########################################################################
3302 smdk6400_noUSB_config   \
3303 smdk6400_config :       unconfig
3304         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3305         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3306         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3307         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3308                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3309                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3310         else                                                                            \
3311                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3312                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3313         fi
3314         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3315
3316 #========================================================================
3317 # i386
3318 #========================================================================
3319 #########################################################################
3320 ## AMD SC520 CDP
3321 #########################################################################
3322 eNET_config     :       unconfig
3323         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3324
3325 sc520_cdp_config        :       unconfig
3326         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3327
3328 sc520_spunk_config      :       unconfig
3329         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3330
3331 sc520_spunk_rel_config  :       unconfig
3332         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3333
3334 #========================================================================
3335 # MIPS
3336 #========================================================================
3337 #########################################################################
3338 ## MIPS32 4Kc
3339 #########################################################################
3340
3341 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3342
3343 incaip_100MHz_config    \
3344 incaip_133MHz_config    \
3345 incaip_150MHz_config    \
3346 incaip_config: unconfig
3347         @mkdir -p $(obj)include
3348         @[ -z "$(findstring _100MHz,$@)" ] || \
3349                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3350                   $(XECHO) "... with 100MHz system clock" ; \
3351                 }
3352         @[ -z "$(findstring _133MHz,$@)" ] || \
3353                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3354                   $(XECHO) "... with 133MHz system clock" ; \
3355                 }
3356         @[ -z "$(findstring _150MHz,$@)" ] || \
3357                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3358                   $(XECHO) "... with 150MHz system clock" ; \
3359                 }
3360         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3361
3362 tb0229_config: unconfig
3363         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3364
3365 vct_premium_config              \
3366 vct_premium_small_config        \
3367 vct_premium_onenand_config      \
3368 vct_premium_onenand_small_config \
3369 vct_platinum_config             \
3370 vct_platinum_small_config       \
3371 vct_platinum_onenand_config     \
3372 vct_platinum_onenand_small_config \
3373 vct_platinumavc_config          \
3374 vct_platinumavc_small_config    \
3375 vct_platinumavc_onenand_config  \
3376 vct_platinumavc_onenand_small_config: unconfig
3377         @mkdir -p $(obj)include
3378         @if [ "$(findstring _premium,$@)" ] ; then \
3379                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3380                 $(XECHO) "... on Premium board variant" ; \
3381         fi
3382         @if [ "$(findstring _platinum_,$@)" ] ; then \
3383                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3384                 $(XECHO) "... on Platinum board variant" ; \
3385         fi
3386         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3387                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3388                 $(XECHO) "... on PlatinumAVC board variant" ; \
3389         fi
3390         @if [ "$(findstring _onenand,$@)" ] ; then \
3391                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3392                 $(XECHO) "... on OneNAND board variant" ; \
3393         fi
3394         @if [ "$(findstring _small,$@)" ] ; then \
3395                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3396                 $(XECHO) "... stripped down image variant" ; \
3397         fi
3398         @$(MKCONFIG) -a vct mips mips vct micronas
3399
3400 #########################################################################
3401 ## MIPS32 AU1X00
3402 #########################################################################
3403
3404 dbau1000_config         :       unconfig
3405         @mkdir -p $(obj)include
3406         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3407         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3408
3409 dbau1100_config         :       unconfig
3410         @mkdir -p $(obj)include
3411         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3412         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3413
3414 dbau1500_config         :       unconfig
3415         @mkdir -p $(obj)include
3416         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3417         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3418
3419 dbau1550_config         :       unconfig
3420         @mkdir -p $(obj)include
3421         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3422         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3423
3424 dbau1550_el_config      :       unconfig
3425         @mkdir -p $(obj)include
3426         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3427         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3428
3429 gth2_config             :       unconfig
3430         @mkdir -p $(obj)include
3431         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3432         @$(MKCONFIG) -a gth2 mips mips gth2
3433
3434 pb1000_config           :       unconfig
3435         @mkdir -p $(obj)include
3436         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3437         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3438
3439 qemu_mips_config        : unconfig
3440         @mkdir -p $(obj)include
3441         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3442         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3443
3444 #########################################################################
3445 ## MIPS64 5Kc
3446 #########################################################################
3447
3448 purple_config :         unconfig
3449         @$(MKCONFIG) $(@:_config=) mips mips purple
3450
3451 #========================================================================
3452 # Nios
3453 #========================================================================
3454 #########################################################################
3455 ## Nios32
3456 #########################################################################
3457
3458 ADNPESC1_DNPEVA2_base_32_config \
3459 ADNPESC1_base_32_config         \
3460 ADNPESC1_config: unconfig
3461         @mkdir -p $(obj)include
3462         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3463                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3464                   $(XECHO) "... DNP/EVA2 configuration" ; \
3465                 }
3466         @[ -z "$(findstring _base_32,$@)" ] || \
3467                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3468                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3469                 }
3470         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3471                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3472                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3473                 }
3474         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3475
3476 DK1C20_safe_32_config           \
3477 DK1C20_standard_32_config       \
3478 DK1C20_config:  unconfig
3479         @mkdir -p $(obj)include
3480         @[ -z "$(findstring _safe_32,$@)" ] || \
3481                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3482                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3483                 }
3484         @[ -z "$(findstring _standard_32,$@)" ] || \
3485                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3486                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3487                 }
3488         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3489                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3490                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3491                 }
3492         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3493
3494 DK1S10_safe_32_config           \
3495 DK1S10_standard_32_config       \
3496 DK1S10_mtx_ldk_20_config        \
3497 DK1S10_config:  unconfig
3498         @mkdir -p $(obj)include
3499         @[ -z "$(findstring _safe_32,$@)" ] || \
3500                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3501                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3502                 }
3503         @[ -z "$(findstring _standard_32,$@)" ] || \
3504                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3505                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3506                 }
3507         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3508                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3509                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3510                 }
3511         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3512                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3513                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3514                 }
3515         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3516
3517 #########################################################################
3518 ## Nios-II
3519 #########################################################################
3520
3521 EP1C20_config : unconfig
3522         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3523
3524 EP1S10_config : unconfig
3525         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3526
3527 EP1S40_config : unconfig
3528         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3529
3530 PK1C20_config : unconfig
3531         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3532
3533 PCI5441_config : unconfig
3534         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3535
3536 #========================================================================
3537 ## Microblaze
3538 #========================================================================
3539
3540 microblaze-generic_config:      unconfig
3541         @mkdir -p $(obj)include
3542         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3543
3544 #========================================================================
3545 # Blackfin
3546 #========================================================================
3547
3548 # Analog Devices boards
3549 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3550         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3551
3552 # Bluetechnix tinyboards
3553 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \
3554         tcm-bf518 tcm-bf537
3555
3556 # Misc third party boards
3557 BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp
3558
3559 # I-SYST Micromodule
3560 BFIN_BOARDS += ibf-dsp561
3561
3562 $(BFIN_BOARDS:%=%_config)       : unconfig
3563         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3564
3565 bf527-ezkit-v2_config   : unconfig
3566         @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
3567                 bf527-ezkit blackfin blackfin bf527-ezkit
3568
3569 #========================================================================
3570 # AVR32
3571 #========================================================================
3572
3573 atngw100_config :       unconfig
3574         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3575
3576 atstk1002_config        :       unconfig
3577         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3578
3579 atstk1003_config        :       unconfig
3580         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3581
3582 atstk1004_config        :       unconfig
3583         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3584
3585 atstk1006_config        :       unconfig
3586         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3587
3588 favr-32-ezkit_config    :       unconfig
3589         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3590
3591 hammerhead_config       :       unconfig
3592         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3593
3594 mimc200_config          :       unconfig
3595         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3596
3597 #========================================================================
3598 # SH3 (SuperH)
3599 #========================================================================
3600
3601 #########################################################################
3602 ## sh2 (Renesas SuperH)
3603 #########################################################################
3604 rsk7203_config: unconfig
3605         @mkdir -p $(obj)include
3606         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3607         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3608
3609 #########################################################################
3610 ## sh3 (Renesas SuperH)
3611 #########################################################################
3612
3613 mpr2_config: unconfig
3614         @mkdir -p $(obj)include
3615         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3616         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3617
3618 ms7720se_config: unconfig
3619         @mkdir -p $(obj)include
3620         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3621         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3622
3623 #########################################################################
3624 ## sh4 (Renesas SuperH)
3625 #########################################################################
3626
3627 MigoR_config :       unconfig
3628         @mkdir -p $(obj)include
3629         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3630         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3631
3632 ms7750se_config: unconfig
3633         @mkdir -p $(obj)include
3634         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3635         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3636
3637 ms7722se_config :       unconfig
3638         @mkdir -p $(obj)include
3639         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3640         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3641
3642 r2dplus_config  :   unconfig
3643         @mkdir -p $(obj)include
3644         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3645         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3646
3647 r7780mp_config: unconfig
3648         @mkdir -p $(obj)include
3649         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3650         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3651
3652 sh7763rdp_config  :   unconfig
3653         @mkdir -p $(obj)include
3654         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3655         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3656
3657 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3658 sh7785lcr_32bit_config \
3659 sh7785lcr_config  :   unconfig
3660         @mkdir -p $(obj)include
3661         @mkdir -p $(obj)board/renesas/sh7785lcr
3662         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3663         @if [ "$(findstring 32bit, $@)" ] ; then \
3664                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3665                 echo "TEXT_BASE = 0x8ff80000" > \
3666                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3667                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3668         fi
3669         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3670
3671 ap325rxa_config  :   unconfig
3672         @mkdir -p $(obj)include
3673         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3674         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3675
3676 espt_config  :   unconfig
3677         @mkdir -p $(obj)include
3678         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3679         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3680
3681 #========================================================================
3682 # SPARC
3683 #========================================================================
3684
3685 #########################################################################
3686 ## LEON3
3687 #########################################################################
3688
3689 # Gaisler GR-XC3S-1500 board
3690 gr_xc3s_1500_config : unconfig
3691         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3692
3693 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3694 gr_cpci_ax2000_config : unconfig
3695         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3696
3697 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3698 # Development board Stratix II edition, FPGA Device EP2S60.
3699 gr_ep2s60_config: unconfig
3700         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3701
3702 # Gaisler LEON3 GRSIM simulator
3703 grsim_config : unconfig
3704         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3705
3706 #########################################################################
3707 ## LEON2
3708 #########################################################################
3709
3710 # Gaisler LEON2 GRSIM simulator
3711 grsim_leon2_config : unconfig
3712         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3713
3714 #########################################################################
3715 #########################################################################
3716 #########################################################################
3717
3718 clean:
3719         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3720                $(obj)examples/standalone/atmel_df_pow2                    \
3721                $(obj)examples/standalone/eepro100_eeprom                  \
3722                $(obj)examples/standalone/hello_world                      \
3723                $(obj)examples/standalone/interrupt                        \
3724                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3725                $(obj)examples/standalone/sched                            \
3726                $(obj)examples/standalone/smc91111_eeprom                  \
3727                $(obj)examples/standalone/test_burst                       \
3728                $(obj)examples/standalone/timer
3729         @rm -f $(obj)examples/api/demo{,.bin}
3730         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3731                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3732                $(obj)tools/envcrc                                         \
3733                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3734                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3735                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3736                $(obj)tools/ncb             $(obj)tools/ubsha1
3737         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3738                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3739                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3740                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3741                $(obj)lib_blackfin/u-boot.lds                              \
3742                $(obj)u-boot.lds                                           \
3743                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3744         @rm -f $(obj)include/bmp_logo.h
3745         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3746         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3747         @rm -f $(ONENAND_BIN)
3748         @rm -f $(obj)onenand_ipl/u-boot.lds
3749         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3750         @find $(OBJTREE) -type f \
3751                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3752                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3753                 | xargs rm -f
3754
3755 clobber:        clean
3756         @find $(OBJTREE) -type f \( -name .depend \
3757                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3758                 -print0 \
3759                 | xargs -0 rm -f
3760         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3761                 $(obj)cscope.* $(obj)*.*~
3762         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3763         @rm -f $(obj)u-boot.kwb
3764         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3765         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3766         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3767         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3768         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3769
3770 ifeq ($(OBJTREE),$(SRCTREE))
3771 mrproper \
3772 distclean:      clobber unconfig
3773 else
3774 mrproper \
3775 distclean:      clobber unconfig
3776         rm -rf $(obj)*
3777 endif
3778
3779 backup:
3780         F=`basename $(TOPDIR)` ; cd .. ; \
3781         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3782
3783 #########################################################################